When trying to clamp to pixel a box that is exactly in between 2
pixels, the clutter_actor_box_clamp_to_pixel() function changes the
size of the box.
Here is an example :
ClutterActorBox box = { 10.5, 10, 20.5, 20};
g_message ("%fx%f -> %fx%f", box.x1, box.y1, box.x2, box.y2);
clutter_actor_box_clamp_to_pixel (&box);
g_message ("%fx%f -> %fx%f", box.x1, box.y1, box.x2, box.y2);
Here is what you get :
** Message: 10.500000x10.000000 -> 20.500000x20.000000
** Message: 10.000000x10.000000 -> 21.000000x20.000000
That is because of the properties of the ceilf and floorf function
used to do the clamping.
For example, ceil(0.5) is 1.0, and ceil(-0.5) is 0.0.
And, floor(0.5) is 0.0, and floor(-0.5) is -1.0.
To work around that problem this patch retains the distance between x
and y coordinates and apply that difference before calling ceilf() on
x2 and y2.
https://bugzilla.gnome.org/show_bug.cgi?id=689073
Export the last event received for each touch point in its entirety,
instead of duplicating ClutterEvent accessors one at a time.
examples/pan-action.c has been updated to show the type of the event
that's causing the panning.
https://bugzilla.gnome.org/show_bug.cgi?id=685737
TapAction is a GestureAction-subclass that handles clicks and
tap gestures. It is meant to provide a replacement for ClickAction
using GestureAction:
• it handles events trasparently without capturing them, so that it
can coexists with other GestureActions;
• the ::tap signal is not emitted if the drag threshold is exceeded;
• building upon GestureAction the amount of code is greatly reduced.
TapAction provides:
• tap signal, notifying users when a tap has been performed.
The image-content example program has been updated replacing its
ClickAction usage with TapAction.
https://bugzilla.gnome.org/show_bug.cgi?id=683948
Ensure that when cancelling a gesture, either because a callback
has returned FALSE or because clutter_gesture_action_cancel() has
been called, the array tracking touch points is emptied and a whole
new set of touch points is needed before restarting the gesture.
https://bugzilla.gnome.org/show_bug.cgi?id=685221
Let gesture subclasses override how the drag threshold should
be handled:
• CLUTTER_GESTURE_TRIGGER_NONE tells GestureAction that the gesture
must begin immediately and there's no drag limit that will cause
its cancellation;
• CLUTTER_GESTURE_TRIGGER_AFTER is the default GestureAction behaviour,
where it needs to wait until the drag threshold has been exceeded
before considering the gesture valid;
• CLUTTER_GESTURE_TRIGGER_BEFORE will make GestureAction cancel
the gesture once the drag exceed the configured threshold.
For example, ZoomAction and RotateAction could set
CLUTTER_GESTURE_TRIGGER_NONE since the use of two fingers makes the
begin of the action more self-evident, while an hypothetical Tap
gesture may use CLUTTER_GESTURE_TRIGGER_BEFORE to cancel the tap if
the pointer moves too much.
https://bugzilla.gnome.org/show_bug.cgi?id=685028
The code for handling key repeats (and in particular stopping on focus loss)
assumes that the repeat key is set to XKB_KEYCODE_INVALID in the default case.
This change switches to the new mechanism for loading a cursor into a buffer.
It no longer relies on having a PNG stored in a known location and instead
loads from the Wayland cursor theme.
Signed-off-by: Rob Bradford <rob@linux.intel.com>
Add support for repeating keys to the Wayland input backend.
Unfortunately the repeat delay/interval is hardcoded into the Clutter
backend, as Wayland doesn't yet tell clients what the global values
should be.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
For Wayland, this is mostly the input protocol having changed, although
there's also the SHM pool API, the cursor API, as well as fullscreen and
ping.
Also port to the new (months-old) xkbcommon API, as used by Weston 0.95.
This involves having xkbcommon manage the state for us, where
appropriate. Fans of multi-layout keyboards (or just caps lock) will no
doubt appreciate these changes.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Looks like we need to include this directly, but also need to include
cogl/cogl.h to get COGL_HAS_EGL_SUPPORT, since cogl-egl.h doesn't
include cogl-defines.h first.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
If a button press happen on stage and the pointer is moved outside
the stage while holding the mouse button, the motion and release
events are still delivered to actors. Do the same X11 soft grab
emulation for touch events.
https://bugzilla.gnome.org/show_bug.cgi?id=685589
On various systems, trying to release a mutex that hasn't been acquired
will result in a run-time error.
In order to avoid this, we trylock() the Big Clutter Lock™ and
immediately unlock() it, regardless of the result; if the lock was
already acquired, trylock() will immediately fail, and we can release
it; if the lock was not acquired, trylock() will succeed, and we can
release the lock immediately.
This is necessary to maintain binary compatibility and invariants for
Clutter applications doing:
clutter_init()
clutter_threads_enter()
...
clutter_main()
...
clutter_threads_leave()
instead of the correct:
clutter_init()
clutter_threads_enter()
...
clutter_threads_leave()
clutter_main()
clutter_threads_enter()
...
clutter_threads_leave()
With Clutter ≥ 1.12, the idiomatic form is:
clutter_init()
...
clutter_main()
given that the public Big Clutter Lock™ acquire/release API has been
deprecated, and nobody should take the lock outside of Clutter itself.
https://bugzilla.gnome.org/show_bug.cgi?id=679439
When the last touch has been released the stage on the
corresponding master device (eg. the virtual core pointer) is set
to NULL and no mouse events can be delivered until an ENTER event
has occurred and the stage pointer restored.
This is due to the fact that the master devices can send both
touch events and mouse events, forwarding events coming from the
attached slave devices.
To restore delivery of mouse events we need to ensure that the
stage is set on each ButtonPress, ButtonRelease and Motion event
coming from master devices.
https://bugzilla.gnome.org/show_bug.cgi?id=684509
When using the new ActorAlign flags we must get the real alignment for
the horizontal axis, as clutter_actor_allocate() will compute the
effective alignment by itself; if we use the effective alignment then
ClutterActor.allocate() will swap it, and undo our work.
When using the old BinAlignment flags we should reverse the alignment
depending on whether the text direction of the child is RTL or LTR.
See bug: https://bugzilla.gnome.org/show_bug.cgi?id=684214
It should be possible to destroy the actor currently being dragged from
within the ::drag-end signal. In order to do this, we need to keep a
reference on the action for the duration of the emit_drag_end() function
as well as resetting the action's state inside the dispose()
implementation, to avoid trying to access cleared data.
https://bugzilla.gnome.org/show_bug.cgi?id=681814
Modified Return key presses don't trigger ::activate so we would end
up adding an unprintable character to a single paragraph mode pango
layout which renders it as a box.
https://bugzilla.gnome.org/show_bug.cgi?id=623344
The code for calculating the content box when the aspect ratio is
greater than 1 was broken. The same code that did the calculation for
aspect ratio less than 1 should be used in all cases.
Fixes: https://bugzilla.gnome.org/682161
When we miss button release events (eg. when they happen outside
of our window) we must ensure that the corresponding point is
removed from the array of tracked points, otherwise GestureAction
will get very confused and will cancel all subsequent gestures.
https://bugzilla.gnome.org/show_bug.cgi?id=683471
When starting a new gesture before the momentum of the previous one
has finished the ::pan-stopped was counter-intuitively emitted
after the new ::gesture-begin.
Make use of gesture_prepare() to reset the state of the action
right before emitting ::gesture-begin.
https://bugzilla.gnome.org/show_bug.cgi?id=683431
We often mean that when key_focus == NULL, it's assumed to be on the
stage, and clutter_stage_get_key_focus() reflects this. We also do a
lot of check around the lines of key_focus == NULL instead of also
checking for the stage, so make sure to normalize it so that explicitly
grabbing the stage's key focus will not change our behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=683301
The ClutterEventSequence structure is a fully opaque type; on X11, it is
just an unsigned integer that gets converted into a pointer, but in the
future it may become a fully fledged data structure.
Obviously, we cannot tell people to just dereference the pointer into an
integer in order to use it, and still retain the ability to change the
type; for this reason, we need a proper accessor function to convert the
EventSequence into a touch detail, to be used with the XInput API.
The ordering of the evdev button numbers is the opposite of the
order in Clutter (the middle button is 3 instead of 2) so we need to
manually map the button numbers when creating a ClutterButtonEvent.
https://bugzilla.gnome.org/show_bug.cgi?id=680255
803b3bafb6 introduced a new issue for
multi touch events.
In the case where 2 touch events for 2 different touch points are
processed in the same iteration, a call to
_clutter_stage_remove_device() when processing the first event will
remove the stage setting of the InputDevice. That means Clutter will
skip the second event, because it can't find a stage to which relate
the event, so no related actor and so no emission.
To fix this we move the _clutter_stage_(add/remove)_device() calls
into the input device. This way the input device can find out exactly
when to call these functions (i.e. when no touch point were previously
active or when no touch point remain active).
https://bugzilla.gnome.org/show_bug.cgi?id=682362
Interpolating between two transformations expressed using a 3D matrix
can be achieved by decomposing the matrices into their transformations
and do a simple numeric interpolation between the initial and final
states, like we do for other data types.
Luckily for us, the CSS Transforms specification from the W3C provides
the decomposition algorithm, using the "unmatrix" code taken from the
book "Graphics Gems II, edited by Jim Arvo".
Once the matrices have been decomposed, we can simply interpolate the
transformations, and re-apply them onto the result matrix, using the
facilities that Clutter provides for interpolating between two known
GTypes.
Since Cogl version 1.11.2, Cogl no longer includes the EGL headers
from cogl.h if COGL_ENABLE_EXPERIMENTAL_2_0_API is defined. Instead
the application needs to include cogl-egl.h so that we can avoid
polluting the global namespace with X defines. Clutter defines the 2.0
define in its configure.ac and it is relying on Cogl to include the
right EGL header in clutter-egl-headers.h so we need to change which
header it includes.
When changing an implicit transition mid flight we may end up with an
easing state with a duration of zero milliseconds; this leads to the
implicit transition machinery setting the final state directly onto the
actor. If there is a running transition, though, we need to remove it
from the transitions table, otherwise it will keep running.
This regression happened when the update_transition() internal function
was merged into the create_transition() one.
Tested-by: Lionel Landwerlin <llandwerlin@gmail.com>
PanAction is a GestureAction-subclass that implements the panning
concept for scrollable actors, with the ability to emit interpolated
signals to emulate the kinetic inertia of the panning. PanAction provides:
• pan signal, notifying users of the panning gesture status;
• pan-stopped signal, emitted at the end of the interpolated phase
of the panning gesture, if enabled;
• pan-axis property, to allow constraining the dragging to a specific
axis;
• interpolated property, to enable or disable the inertial behaviour;
• deceleration property, to customize the rate at which the momentum
of the panning will be slowed down;
• acceleration-factor property, applied to the inertial momentum when
starting the interpolated sequence.
An interactive test is also provided.
https://bugzilla.gnome.org/show_bug.cgi?id=681648
Add some accessors to simplify common tasks for GestureAction users:
• clutter_gesture_action_get_motion_delta() to get the delta
on the X and Y axis in stage coordinates since the last motion
event, and the scalar distance travelled;
• clutter_gesture_action_get_velocity() to get an estimate of the
speed of the last motion event along the X and Y axis and as a
scalar value in pixels per millisecond.
https://bugzilla.gnome.org/show_bug.cgi?id=681648
When appending (with a negative row/column parameter), the row/column
count should be incremented by 1, not 2. This also fixes layout errors
when using column/row spacing: The amount of extra space required was
calculated incorrectly due to the wrong column count.
https://bugzilla.gnome.org/show_bug.cgi?id=679990
When setting a drag handle, transform the original press
coordinates using the drag handle as reference instead of the
associated actor.
This causes the initial misplacement of drag handle in
example/drag-action when holding down the Shift key: the handle
gets placed at the main actor origin on the first drag event,
instead of following the mouse pointer.
All subsequent motion events already use the right actor when
transforming the coordinates, thus they are not affected.
https://bugzilla.gnome.org/show_bug.cgi?id=681746
If the DragAction has a drag handle that gets destroyed inside the
::drag-end signal handler, the destruction sequence will trigger a
callback we have in place to check if the handle is being destroyed
mid-drag, e.g. from a ::drag-motion event.
The callback on the drag handle destruction will check if we are still
in the middle of a drag and emit the ::drag-end signal to allow cleaning
up; the callback erroneously uses the drag handle as the argument for
the emit_drag_end() function — instead of the actor to which the drag
action has been attached. Also, by the time we emit the ::drag-end, we
are not dragging the actor any more, so we shouldn't be emitted the
::drag-end signal twice.
The fix is, thus, made of two parts:
- reset the in_drag boolean before emitting the ::drag-end signal
so that destroying the drag handle will not result in a double
signal emission;
- use the correct actor when calling emit_drag_end().
https://bugzilla.gnome.org/show_bug.cgi?id=681814
If the actor has a fixed position set, but it's not using the BinLayout
alignment enumeration to set its alignment, then we force the alignment
factor to 0.0; this is consistent with what happens with an explicit
alignment of CLUTTER_BIN_ALIGNMENT_FIXED.
https://bugzilla.gnome.org/show_bug.cgi?id=682265
Event handling should only apply to editable ClutterText actors, but we
also have the :selectable property to care about.
The button/touch press should position the cursor inside an editable
ClutterText; the :selectable property should be used to allow selecting
the text, either through pointer or touch dragging, via the keyboard, or
by multiple pointer clicks. If neither of these two conditions are met,
the ClutterText should just propagate the event handling further.
Allow setting a ClutterRect on the drag action and force the
dragged actor's position to be always within that rectangle (relative
to the actor's parent).
https://bugzilla.gnome.org/show_bug.cgi?id=681168
The boolean_handled accumulator will stop the signal emission if TRUE is
returned by a signal handler; the boolean_continue accumulator will stop
the signal emission if FALSE is returned. The first one is used for
event-related signals, while the latter is used for action-related
signals.
Only the signal connection. When using G_ENABLE_DIAGNOSTIC there will be
a warning for every signal connection.
We should try and discourage people from ever using the paint signal
ever again, until we can safely remove it in Clutter 2.0.
We cannot fully deprecate Geometry, because ClutterActor and ClutterText
are actually using the type in signals and properties; but we can
deprecate the API that uses this type, so that 2.0 will be able to avoid
it entirely.
The :clip property still uses ClutterGeometry, which is a very bad
rectangle type. Since we cannot change the type of the property
compatibly, we should introduce a new property using ClutterRect
instead. This also matches the ClutterActor.set_clip() API, which uses a
decomposed rectangle with floating point values, like we do with
set_position() and set_size().
Instead of only relying on the (now) deprecated BinAlignment.FIXED
enumeration value, we just ask the actor if a fixed position has been
explicitly set, under the assumption that if a developer decided to call
set_x(), set_y(), or set_position() on an actor inside a BinLayout then
she wanted the fixed position to be honoured.
This removes the last (proper) use of the BinAlignment enumeration.
The Geometry type is an *awful* representation of a integer rectangle,
as it uses unsigned integers for its size, leading to overflow issues
when unioning and intersecting. We have better rectangle types in
Cairo and Clutter, these days.
When dragging/scrolling using touch events, we want the same behaviour
than for motion events. We need to honor the user's calls to
clutter_stage_set_motion_events_enabled() to deactive event
bubbling/captured sequences on the actor located under the pointer and
just transmit events to the stage/grab actor.
https://bugzilla.gnome.org/show_bug.cgi?id=680751
We need to make sure that ClutterActor::transition-stopped is emitted
after the transition was removed from the actor's list of transitions.
We cannot just remove the TransitionClosure from the hash table that
holds the transitions associated to an actor, and let the
TransitionClosure free function stop the timeline, thus emitting the
::transition-stopped signal - otherwise, stopping the timeline will end
up trying to remove the transition from the hash table, and we'll get
either a warning or a segfault.
Since we know we're removing the timeline anyway, we can emit the signal
ourselves in case the timeline is playing, in both the implicit and
explicit cases.
The :transform property controls the modelview matrix of an actor; it
can be used to set a custom modelview matrix on the actor, as opposed
to the decomposed transformations (rotation, scaling, translation)
provided by the ClutterActor class.
The transitions we create implicitly should be removed from the set of
transitions associated to an actor; the transitions explicitly
associated to an actor, though, have to survive the emission of their
'stopped' signal.
We can remove the update_transition() private method, and move its
functionality inside the create_transition() private method, thereby
removing lots of duplicated code, as well as redundant checks on the
existence of a transition. This will allow handling transition updates
atomically in the future.
Another progress function from the CSS3 Transitions specification, using
a parametrices cubic bezier curve between (0, 0) and (1, 1) with two
control points.
(sadly, no ASCII art can approximate a cubic bezier, so no graph)
The cubic-bezier() progress function comes with a bunch of preset easing
modes: ease, ease-in, ease-out, and ease-in-out, that we can map to
enumeration values.
The CSS3 Transitions specification from the W3C defines the possibility
of using a parametrized step() timing function, with the following
prototype:
steps(n_steps, [ start | end ])
where @n_steps represents the number of steps used to divide an interval
between 0 and 1; the 'start' and 'end' tokens describe whether the value
change should happen at the start of the transition, or at the end.
For instance, the "steps(3, start)" timing function has the following
profile:
1 | x
| |
| x---|
| ' |
| x---' |
| ' |
0 |---' |
Whereas the "steps(3, end)" timing function has the following profile:
1 | x---|
| ' |
| x---' |
| ' |
x---' |
| |
0 | |
Since ClutterTimeline uses an enumeration for controlling the progress
mode, we need additional API to define the parameters of the steps()
progress; for this reason, we need a CLUTTER_STEPS enumeration value,
and a method for setting the number of steps and the value transition
policy.
The CSS3 Transitions spec helpfully also defines a step-start and a
step-end shorthands, which expand to step(1, start) and step(1, end)
respectively; we can provide a CLUTTER_STEP_START and CLUTTER_STEP_END
enumeration values for those.
This patch brings 'enter-event' and 'leave-event' generation for touch
based devices. This leads to adding a new API to retrieve coordinates
of a touch point.
https://bugzilla.gnome.org/show_bug.cgi?id=679797
We use floorf() for the allocation origin, and ceilf() for the
allocation size. Swapping the two introduces rounding errors if
the original allocation is not clamped to the nearest pixel.
This reverts commit 7f6b17bc50.
ClutterLayoutManager implementations should just defer the easing state
set up to the child, and not try to impose a global one.
This reverts commit 793bde9143.
ClutterLayoutManager implementations should just defer the easing state
set up to the child, and not try to impose a global one.
This reverts commit 320fb156b4.
ClutterLayoutManager implementations should just defer the easing state
set up to the child, and not try to impose a global one.
This reverts commit 58a1854b57.
ClutterLayoutManager implementations should just defer the easing state
set up to the child, and not try to impose a global one.
This reverts commit 03ec016faa.
ClutterLayoutManager implementations should just defer the easing state
set up to the child, and not try to impose a global one.
ClutterTexture is full of side effects that have been picked up over the
years; they make improving ClutterTexture harder than necessary, as well
as making subclassing impossible without introducing weird behaviours in
the child classes as well.
Since Clutter 1.10 we have the ClutterImage content type, which is
side-effects free, given that it just paints texture data using the
state of the actor.
Sadly, we still have subclasses of ClutterTexture, both deprecated and
not, so we cannot deprecate ClutterTexture right out; the type and
structures will still be available, like we do for ClutterGroup, but the
whole API should be moved to the deprecated section, waiting for the
time in which we can get rid of it all.
We need an alternative to the translation performed by the anchor point,
one that possibly applies to all three axes and is relative to the
pivot-point.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
For some transformations we need to be able to set the Z component of
the pivot point.
Unlike :pivot-point, the Z coordinate is not normalized because actors
are 2D surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
Given that the rotation transformations are now affected by the pivot
point, the Actor class should provide an accessors pair only for the
angle of rotation on a given axis.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The pivot point is a point in normalized coordinates space around which
all transformations revolve.
It supercedes the anchor point and the per-transformation center points
as well as the gravity settings, and tries to sort out the mess that
is the modelview matrix set up in ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=677853
The ClutterActor:depth property has always been a bit of a misnomer:
actors are 2D flat surfaces, so they cannot have "depth"; the property
defines the position on the Z axis.
Another side effect of the :depth property is that it decides the
default paint and allocation order on insertion, and that setting it
will call the ClutterContainer.sort_depth_order() method. This has
proven to be a fairly bad design decision that we strung along from the
0.x days, as it gives a false impression of being able to change the
paint and allocation order simply by changing the position on the Z
axis — something that, in reality, requires depth testing to be enabled
during the paint sequence of an actor's parent.
For 2.0 we need a clean break from the side effects, and a better
defined interface.
ClutterActor:z-position is essentially what ClutterActor:depth is, but
doesn't call into ClutterContainer, and has a more apt name.
https://bugzilla.gnome.org/show_bug.cgi?id=679465
The :position property on ClutterText clashes with the same property on
ClutterActor; it's also badly named, given that it represents the
cursor's position inside the text; finally, it does not match its
accessors, violating the API style conventions.
https://bugzilla.gnome.org/show_bug.cgi?id=679457
Overriding the default behaviour of ClutterDragAction::drag-motion is
currently a pain; you either need to subclass the ClutterDragAction and
override the class closure for the signal, or you need to connect to the
signal and call g_signal_stop_emission_by_name() - neither option being
particularly nice or clean. The established pattern for these cases
would be to have a boolean return value on the ::drag-motion signal, but
we cannot do that without breaking ABI.
To solve the issue in a backward compatible way, we should introduce a
new signal, ::drag-progress, with a boolean return value. If the signal
emission chain returns TRUE, the ::drag-motion signal will be emitted,
and the default behaviour will be honoured; if the signal emission chain
returns FALSE, instead, the ::drag-motion signal will not be emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=679451
Acquiring the Clutter lock to mark critical sections is not portable,
and not recommended to implement threaded applications with Clutter.
The recommended pattern is to use worker threads, and schedule UI
updates inside idle or timeout handlers within the main loop. We should
enforce this pattern by deprecating the threads_enter()/leave()
functions. For compatibility concerns, we need internal API to acquire
the main lock during frame processing dispatch.
https://bugzilla.gnome.org/show_bug.cgi?id=679450
It can be useful to check whether a ClutterActorIter is currently valid,
i.e. if the iterator has been initialized *and* if the actor to which it
refers to hasn't been updated.
We can also use the is_valid() method in the conformance test suite to
check that initialization has been successful, and that changing the
children list through the ClutterActorIter API leaves the iterator in a
valid state.
The dispose sequence will keep the object alive, and we need to release
the last reference held by the StageManager before releasing control to
GObject.
The build should not add deprecated/ into the default INCLUDE paths, so
that deprecated headers are clearly separated; this will make it easier
to get rid of them when we branch out for 2.0.
Copy and paste of the implementation done at Gtk+ based on pango. This
should be moved to a common library, like the old GailTextUtil. Ideally
on pango itself.
https://bugzilla.gnome.org/show_bug.cgi?id=677221
It is possible that we get a DeviceChanged event for a device
that is not in the hash table yet. E.g. I've seen this when
using xrandr to change screen resolution. Prevent a crash in
this case.
https://bugzilla.gnome.org/review?bug=678439
* clutter/clutter-cairo-texture.c (clutter_cairo_texture_emit_draw):
Always update the Cogl texture after emitting ::draw, since we control
the dynamic extent in which drawing should happen on the cairo_t.
Fixes#677966.
If the Interval used has a different type than the property we are
animating through a PropertyTransition then we should transform the
interpolated value before applying it, to avoid warnings down the
line.
The compute() method will cache the result, to avoid multiple
allocations and copies; this means, though, that we need to unset the
GValue when destroying the Interval.
Now that the interval can transform the initial and final values to the
type declared when constructing it, there is no need to check for the
value type inside set_initial_value() and set_final_value().
It's possible that GValues passed to a ClutterInterval setter are not
of the same type as the interval - for instance, if they come from
language bindings, or from untrusted sources; we can use the same
transformation functions we already use inside ClutterTransition to
ensure that the ClutterInterval always stores values of the same type
used to create the interval itself.
The ::stopped signal should be emitted at the end of the Timeline, after
the last ::completed signal emission, in order to have a proper
chronological progress of signal emissions:
started → new-frame → [ ... ] → completed → stopped
This way, ::stopped can perform a proper teardown of the state set up
during ::started, without interfering with the potential cyclical
emission of ::completed.
Calling clutter_point_free(clutter_point_zero()) or calling
clutter_rect_free(clutter_rect_zero()) should be safe, exactly like it's
safe to call those functions with a NULL argument.
The implicit animations only apply to properties that are documented as
'animatable'; the explicit animations apply to any property defined
through GObject or ClutterAnimatable.
For 1.x, we still have a duration of 0 msecs, but we have a valid easing
state, so we can change the easing parameters without calling save and
restore.
By checking if the interval is valid inside compute_value() we can catch
the cases where the interval values of a PropertyTransition are set
after the transition has been added to an Animatable instance - i.e. the
following code:
let transition = new Clutter.PropertyTransition();
transition.set_property_name('opacity');
actor.add_transition('opacityAnim', transition);
transition.set_to_value(0);
should be equivalent to:
let transition = new Clutter.PropertyTransition();
transition.set_property_name('opacity');
transition.set_to_value(0);
actor.add_transition('opacityAnim', transition);
instead of emitting a warning.
Once a ClutterPropertyTransition is attached to a ClutterAnimatable, if
no interval is set we can simply use the current state of the property
to define the from and to values. This allows the creation of property
transitions from the current state of the Animatable instance without
excessive verbosity.
ClutterContent implementations may allow repeating their contents when
painting; we should provide the repeat policy on the actor, like we do
for scaling filters and content gravity.
ClutterActor's x-align and y-align properties should be used to control
the alignment of the PangoLayout when painting it within a larger
allocation, and the ClutterText has the x-expand or the y-expand flags
set.
Fixed positions are defined to be initialized at 0,0 whenever
enabled, by setting fixed_position_enabled to true, or by setting
just one of x/y. This normally happens in the defaults, but we need
to make sure it also happens if a fixed position was once set but
then disabled. We do this by always resetting it back to 0,0 when
fixed_position_set is unset.
Instead of showing the full timestamp for debugging messages that happen
within a second, showing the delta from the previous full timestamp can
be more useful when debugging; this allows immediately seeing the time
difference, instead of doing the math in our heads.
Only for debug builds, the debug name should include a) actor name, b)
type name, and c) pointer address.
For non-debug builds we can live with the actor/type name.
ClutterGridLayout is port of GtkGrid to a Clutter layout manager. All
the logic is taken from gtkgrid.c, so all the credits should go to
Matthias Clasen for writing this nice piece of code.
ClutterGridLayout supports adding children with it's own methods
GridLayout.attach() and GridLayout.attach_next_to() as well as
Actor.add_child() and friends. The latter adds children in a similar
fashion to ClutterBoxLayout
https://bugzilla.gnome.org/show_bug.cgi?id=677372
The plain C bytes array, while convenient from a C perspective, is not
well handled by language bindings: the length of the array is not
specified, and it's only just implied by the image data size, rowstride,
and pixel format.
GBytes is a read-only bytes buffer that has an implicit length; we can
use it as the storage medium so that language bindings can actually
function correctly.
This will ensure that we have a CoglContext, albeit the stub winsys one,
on Mac.
Tested-by: Roland Peffer <gdevel@clixxun.com>
Tested-by: Laszlo Pandy <laszlok2@gmail.com>
The ::stopped signal is emitted when the timeline has been completely
exhausted or when the timeline has been programmatically stopped by
using clutter_timeline_stop(); the notification at the end of the
timeline run allows to write handlers without having to check whether
the current repeat is the last one, like we are forced to do when using
the ::completed signal.
Based on the patch by: Jasper St. Pierre <jstpierre@mecheye.net>
https://bugzilla.gnome.org/show_bug.cgi?id=676854
Ensure that resizing transitions smoothly when switching between major
axis; the allocation aspect ratio is not important: it's the size of the
allocation that dictates the major axis.
It's similar to to the implicit animation API of ClutterActor and
compatible to deprecated API of ClutterBoxLayout and
ClutterTableLayout.
It adds :use-animations, :easing-mode, :easing-duration and
:easing-delay properties to control animations when allocation of a
child has changed. Layout manager implementers should call
use_animations = clutter_layout_manager_get_easing_state (manager,
&mode,
&duration,
&delay);
from the allocate() virtual function to access these values.
https://bugzilla.gnome.org/show_bug.cgi?id=676827
The z coordinate of the origin should be checked against the same
coordinate of the vertex behind it. Given that most actors are flat
surfaces, this check should always succeed.
https://bugzilla.gnome.org/show_bug.cgi?id=675396
Instead of going through clutter_event_get_state() and checking if the
modifier mask is set, we can provide simple convenience functions to do
it for us.
When creating a FlowLayout container, setting a specific size on it, and
adding a child to it, as per the attached testcase, it crashes. The line
on the backtrace doesn't really make sense, but from looking over it, it
appears that it's probably because priv->line_natural is NULL. The
attached patch makes it so in this case, priv->line_natural is
allocated.
https://bugzilla.gnome.org/show_bug.cgi?id=676068
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
-Don't include unistd.h and stdint.h unconditionally as not all Windows
compilers have them around.
-Only include cogl/cogl-xlib.h when it is really supported by Cogl and GDK.
-sys/ioctl.h is not available on Windows (MinGW/MSVC).
-Correct the call to cogl_renderer_set_winsys_id:
(backend_cogl->cogl_renderer, COGL_WINSYS_ID_WGL) ->
(renderer, COGL_WINSYS_ID_WGL)
The property uses an array with the following CSS style syntax
[ top, right, bottom, left ] or
[ top, left/right, bottom ] or
[ top/bottom, left/right ] or
[ top/right/bottom/left ]
https://bugzilla.gnome.org/show_bug.cgi?id=676367
Passing a NULL buffer to clutter_text_set_text() does not behave the same
way as passing an empty string "" (as specified in the documentation).
This was working as expected previously, but somehow the behaviour changed
at some point and created 2 new issues:
- Passing a NULL pointer will not reset the string
- If the ClutterText is editable, it will segfault in strcmp
Validations have been added to prevent this.
https://bugzilla.gnome.org/show_bug.cgi?id=675890
This fixes drop_action_unregister() to not call g_object_get_data()
on priv->stage if not yet resolved. This can happen if the action's
actor was destroyed before ever being mapped.
When the transition was removed from the scroll-actor manually,
to cancel a not-finished animation, the transition struct member
wasn't reset to NULL.
This fixes this problem, and removes the need for the struct member
to be reset manually when animation has completed.
https://bugzilla.gnome.org/show_bug.cgi?id=676334
When setting up the transition manually by calling
clutter_keyframe_transition_set_key_frame (transition, n, keys);
clutter_keyframe_transition_set_values (transition, n, values);
clutter_keyframe_transition_set_modes (transition, n, modes);
the frame doesn't have a valid interval when calling set_keys(), so we
need to check its existence and create it if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=676031
Chaining up to the parent's implementation of pick() is not enough: we
need to paint our children explicitly because of the compatibility mode
checks we use to avoid breaking custom containers.
https://bugzilla.gnome.org/show_bug.cgi?id=676088
We need to clip the children during picking as well as we do when
painting, to avoid reactive children outside of the visible area
receiving events.
This also allows us to refactor some common code into proper functions.
-Add configuration in Clutter projects to add option to build Clutter with
the GDK3 backend in addition to the Win32 backend
-Add another preconfigured clutter-config.h.win32_GDK which contains
backend configs for both GDK3 and Win32 windowing and input.
When asking for the preferred width and height of an actor, in case
only one of either the minimum or the natural width is set, the margin
offsets should also be applied.
When getting touch events, the device manager would try
to pass an invalid device to translate_axes().
clutter_event_set_device() will only update event->touch.device
for touch events, not event->motion.device, as used.
Fixes Totem crashing on mouse motion/button press when using
a touchpad.
https://bugzilla.gnome.org/show_bug.cgi?id=675371
The drop-cancel signal allows the drop action to cleanup its
state if the can-drop signal is refused. This is especially
useful if the drop action (or its target actor) is managing
any drop target animations.
https://bugzilla.gnome.org/show_bug.cgi?id=675336
The example code that is meant to be XIncluded into the API reference
should not be part of the interactive test suite: it's code that it is
meant to be used as a reference implementation - whereas the interactive
test suite should be allowed to be lean and test behaviour even in nasty
ways. In short: the test suite should not be the place where we show off
idiomatic code for educational purposes.
The introspection scanner has become slightly more annoying, in the hope
that people start fixing their annotations. As it turns out, it was the
right move.
It's time. Now that we have clutter_actor_allocate() respecting the
easing state of an actor, and that the LayoutManager animation virtual
functions have been deprecated, we can put ClutterAlpha on the chopping
block, and be done with it, once and for all.
So long, ClutterAlpha; and thanks for all the fish.
This semi-aborted API was broken for various reasons:
- it strongly depended on ClutterAlpha, a class we're trying to
deprecate;
- it requires a lot of boilerplate and copy-and-paste code;
- it requires a full relayout of the actor tree for something
that ought to be automatically handled by ClutterActor.
Now that clutter_actor_allocate() handles transitions using the easing
state of the actor, we can deprecate the LayoutManager API for the 1.x
series, and remove it for the 2.x series.
BoxLayout will use the easing state of the children it's allocating; the
current API is re-implemented in terms of an implicit easing state
forced on each child prior to allocating it.
Calling clutter_actor_allocate() should transition between the current
allocation and the new allocation, by using the defined implementation
of the easing state.
This means that:
clutter_actor_save_easing_state (actor);
clutter_actor_allocate (actor, &new_alloc, flags);
clutter_actor_restore_easing_state (actor);
will cause "actor" to transition between the current allocation and the
desired new allocation.
The trick is to ensure that this happens without invalidating the
entire actor tree, but only the portion of the tree that has the
transitioned actor as the local root. For this reason, we just call the
allocate() implementation from within the transition frame advancement,
without invalidating flags: the actor, after all, *has* a valid
allocation for the duration of the transition.
The :x-expand and :y-expand flags on ClutterActor are used to signal
that an actor should expand horizontally and/or vertically - i.e. that
its parent's layout management policy should try to assign extra space
to the actor when allocating it.
The expand flags are automatic: when set on a leaf node in the actor
tree, they will bubble up through the parent and grandparents up to the
top level actor; during allocation, the actors with children will lazily
compute whether their children needs to expand.
The TransitionGroup class is a logical container for running multiple
transitions.
TransitionGroup is not a Score: it is a Transition that advances each
Transition it contains using the delta between frames, and ensures that
all transitions are in a consistent state; these transitions are not
advanced by the master clock.
There are cases when we want to advance a timeline from another time
source. We cannot use _clutter_timeline_do_tick() directly, as that
assumes that the timeline is already playing, so we'll need to create a
wrapper that toggles the playing flag around it.
Given that we can create a ClutterInterval without an initial and final
values using g_object_new(), it stands to reason that we ought to be
able to create an instance when passing NULL GValue pointers to the
new_with_values() constructor as well.
We tend to use float comparison for structured data types like Vertex,
Point, and Size; we should take into consideration fluctuations in the
floating point representation as well.
Instead of a single new() constructor that both allocates and
initializes, split the allocation and initialization into two separate
functions for types that are typically used on the stack, and rarely
allocated on the heap, like ClutterPoint and friends.
This is also applied retroactively to ClutterActorBox and ClutterVertex,
given that the same considerations on usage apply to them as well; we
can add a return value to clutter_actor_box_init() and
clutter_vertex_init() in an ABI-compatible way, so that
clutter_actor_box_new() and clutter_vertex_new() can be effectively
reimplemented as "init (alloc ())".
Using a compound type property for position and size has various
advantages: it reduces the amount of checks; it reduces the amount
of notify signals to connect to; it reduces the amount of transitions
generated.
The ClutterCanvas content implementation should be used instead, to
avoid stringing along the ClutterTexture API and implementation.
This change requires some minor surgery, as the deprecated section
already contains an header for the previously deprecated methods; plus,
we don't want to deprecate clutter_cairo_set_source_color(). This means
creating a new header to be used for Cairo-related API.
The get_distance() API uses machine integers to compute the distance;
this means that on 32bit we can overflow the integer size. This gets
hidden by the fact that get_distance() returns an unsigned integer as
well.
In reality, ClutterPath is an unmitigated mess, and the only way to
actually fix it is to break API.
https://bugzilla.gnome.org/show_bug.cgi?id=652521
This commit adds a further conditional check for calling
clutter_actor_show() when adding a child to an actor. We cannot
unconditionally change the value of the show-on-set-parent property like
the original solution of commit 81b19a78f5
as that breaks the document invariant that show-on-set-parent will be
changed iff an actor is without a parent.
The new ADD_CHILD_SHOW_ON_SET_PARENT flag is part of the default and
legacy flags, thus retaining the default behaviour when adding a child;
the flag is not passed when reordering the list of children, which means
we ignore the state of the show-on-set-parent property.
The conformance test suite fully passes, including the newly added test
to verify that changing the paint order does not trigger visibility.
https://bugzilla.gnome.org/show_bug.cgi?id=674510
This reverts commit 81b19a78f5.
The commit breaks the conformance test unit for the invariants we
guarantee for the 1.x API:
ERROR:actor-invariants.c:307:actor_show_on_set_parent: assertion failed: (show_on_set_parent)
It's possible to run Clutter with the 'null' input backend, which means
that clutter_device_manager_get_default() may return NULL. In the future
we may add a default dummy device manager, but right now it's safer to
just add a simple NULL check in the places where we ask for the device
manager.
I can't think of any reason why it would do this and there's no
comment explaining it so let's just remove it. The global fog state
has been removed in Cogl 2.0 so it will cause problems later.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
CoglVertexBuffer is deprecated so here is a fairly simple replacement
to use the experimental CoglPrimitive API.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Drop a bunch of variables that are not meant to be used by Cally; also,
drop the wrong library name from the Libs key: Clutter has a single
shared library, now.
https://bugzilla.gnome.org/show_bug.cgi?id=674105
The interface looked like a good idea around the time Clutter 0.2 was
out, but in reality we never had a proper, and supported implementation
outside of clutter-gst - thus, ClutterMedia was acting like a wrapper
around GStreamer, leading to hilarious issues of impedence mismatch
between API and all sorts of indirection issues typical of wrong
abstractions.
In theory, ClutterMedia should have been deprecated and removed before
we hit 1.0, but we kept flip-flopping on the issue.
For 2.0, it's time to take it out.
And shoot it in the face.
It's been a year and change, and two stable releases, since we
introduced the paint volume mechanism to allow actors to paint outside
their allocation safely in environments that support clipped redraws.
The time has come to flip the switch, and return a valid paint volume,
matching the actor's allocation, by default - at least for Actor
instances from classes that do not override paint() and
get_paint_volume().
If an actor has a paint signal handler then it's the user responsability
not to paint outside the allocation - and to suffer the consequences of
doing so; in an ideal world, paint() would not be a signal in the first
place anyway. Plus, the idea that painting can happen at any time and
still have a valid surface greatly conflicts with the design goal of
making Clutter's rendering operations fully retained into a render tree.
We can still revert this commit before spinning 1.12, if need be.
When removing the last Action, Constraint, or Effect, we should also be
clearing the corresponding MetaGroup: code inside ClutterActor relies on
NULL checks, and changing them all to check for NULL && n_items == 0
would not be fun.
configure.ac defines XINPUT_2_2 if XI 2.2 support was found. The code
expects XINPUT_2_2 in the device manager, but HAVE_XINPUT_2_2 in the x11
backend.
On newer X servers, the latter causes a BadValue when XIQueryDevice sends a
different major/minor than gdk's device manager (gnome-control-center).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
https://bugzilla.gnome.org/show_bug.cgi?id=673961
We need to remove the transition only if the current repeat is equal to
the number of repeats, and if the transition was marked as remove on
complete. Otherwise, the transition has to remain where it is.
The opacity internal setter will do it for us, and it will take into
consideration any eventual flatten effect applied to the actor.
This unbreaks the actor-offscreen-redirect conformance test.
The get_geometry() implementation is broken on multi-head systems; the
only solution is to use XRandR to get the size of the CRTC that contains
the stage.
In XInput 2, the proximity events of XInput 1 have been replaced by an
axis on a valuator class. This means that, on devices that support
proximity information, for instance pens of a tablet, you will start
receiving events with the distance as an axis value - similarly to how
the pressure and tilt are presented in the API.
We were using g_list_foreach() prior to the first Apocalypse, and that
function is resilient against changes to the list while iterating it;
since we are not using a GList any more, we need handle this case
ourselves.
This also avoids the warning
Cogl-WARNING **: ./cogl-buffer.c:215: GL error (1285): Out of memory
generated by cogl_buffer_map when the CoglBuffer has zero length.
When the easing state has a duration of zero milliseconds we can skip
the entire create_transition() call inside set_width() and set_height(),
to avoid what may be a costly call to get_preferred_*.
If we update a transition that is currently playing, we need to check
the current easing state, and look at the eventual duration, in case
the user wants to cancel the transition.
Instead of checking the duration of the current easing state we should
check if there's a transition in progress, and update it
unconditionally.
If there is no easing state, or the easing state has a duration of zero
milliseconds, then create_transition() should bail out early and set the
requested final state.
This allows us to write:
clutter_actor_save_easing_state (actor);
clutter_actor_set_x (actor, 200);
clutter_actor_restore_easing_state (actor);
[...]
clutter_actor_set_x (actor, 100);
and have the second set_x() update the easing in progress, instead of
being ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=672945
Commit 80626e7584 removed an
IN_DESTRUCTION check from within the add_child_internal() method,
outlining an option for bringing it back. It was too late for the 1.10
cycle to do it, and eventually pick up the pieces, but now that we're
at the beginning of the 1.11 cycle we can restore it, and add checks
elsewhere to balance it.
This patch fixes clutter to not crash when multiple animations share
the same timeline and the actors are explicitly destroyed before
the timeline completes (bug 672890)
Some of the Clutter code was using GL types for the primitive types
such as GLint and GLubyte and then passing these to Cogl. This doesn't
make much sense because the Cogl functions directly take native C
types. This patch just replaces them with either a native C type or a
glib type.
Some of the cogl conformance tests are trying to directly call GL for
example to test creating a foreign texture. These tests have been
changed to manually define the GL enum values instead of relying on a
GL header to define them.
This is necessary because Cogl may soon stop including a GL header
from its public headers.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The disjunction operator was misspelt as -O which tests whether the
following file is owned by the calling user. This doesn't take enough
arguments so bash was showing an error and the test was always
failing. This meant that NEED_XKB_UTILS was always false which should
have broken the build but the Makefile was mistakenly including
clutter-xkb-utils.c again if SUPPORT_WAYLAND is defined.
See 1b77565e for reference.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The commit 90e5088 added some extra compiler warning options that were
triggering warnings when enabling the wayland build due to missing
header includes. This adds those header includes in.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Because the wayland-server-protocol.h header includes symbols that
collide with wayland-client-protocol.h Cogl now provides top level
<cogl/cogl-wayland-server.h> and <cogl/cogl-wayland-client.h> headers so
that applications can ensure they only include one of the wayland
protocol headers in a particular compilation unit. This updates clutter
accordingly to include those headers.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Should not have been there in the first place: the animatable will be
set either using ClutterTransition API, or when adding the transition
to a ClutterActor.
When adding a transition to a ClutterActor, the actor should hold a
reference on it, and release it only when we remove it. This makes
transitions just like other objects held by ClutterActor.
The ::completed signal emission is part of the current cycle; repeating,
like the automatic reverse of the timeline's direction, happens after
the ::completed chain of handlers has been called.
We still use XKeycodeToKeysym() in a fallback path in case we're not
running on a decent enough system; XKeycodeToKeysym() is deprecated as
of version 1.12 of the X server, but since I don't want to copy a bunch
of code from GDK or, god forbid, from Xlib, for a fallback path, it's
probably more reasonable to just silence the compiler warnings - at
least until we can drop all the X compatibility crap, and just use
modern, or semi-modern, API.
Some events may contain precise scrolling information coming from
devices like trackpads and touchscreens. ClutterEvent should allow
setting and getting this information.
While you can get a per-transition notification of completion, it can be
convenient to also have a way to notify that all the transitions
involving an actor are complete. A simple signal triggered by the
removal of the last transition fits the bill pretty neatly.
When handling Configure events from the X server we update the
internal copy of the window size. Unfortunately we may be updating the
wrong stage implementation because we use the one related to the event
translator (which is the first created stage).
This patch fix flickering/redrawning issues with multi-stage by
looking for the right stage implementation associated with an XEvent.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
If restore_easing_state() is called on the last easing state on the
stack, clean up the stack, so that we don't leave stale pointers
around to later segfault on.
When setting the easing mode, duration, or delay without having ever
called clutter_actor_save_easing_state(). It's confusing, and not
really nice.
In the future, we'll have a default easing state implicitly created by
the actor itself, but for the time being explicitly opting in is
preferrable.
If the pointer is inside the window frame when it's shown then we need
to synthesize and emit a NSMouseEnterEvent ourselves, as Quartz won't
do it for us.
This is a bit of a blind commit - but it's taken from an equivalent
patch that has been verified to work in GDK.
Yes, it's not really the proper GL name for a linear-on-every-axis of a
texture plus linear-between-mipmap-levels minification filter, but it
has three redeeming qualities as a name:
- LINEAR_MIPMAP_LINEAR sucks, as it introduces GL concepts like
mipmaps in the API naming, while we're trying to avoid that;
- people using GL already know what 'trilinear' means in this context
without going all Khronos on their asses;
- we're using 2D textures anyway, so 'linear on two axes and linear
between mipmap levels' can be effectively approximated to
'trilinear'.
I mean, if even the OpenGL official wiki says:
Unfortunately, what most people think of as "trilinear" is not linear
filtering of a 3D texture, but what in OpenGL terms is GL_LINEAR mag
filter and GL_LINEAR_MIPMAP_LINEAR in the min filter in a 2D texture.
That is, it is bilinear filtering of each appropriate mipmap level,
and doing a third linear filter between the adjacent mipmap levels.
Hence the term "trilinear".
-- http://www.opengl.org/wiki/Texture
then the horse has already been flogged to death, and I don't intend to
be accused of necrophilia and sadism by flogging it some more.
Prior art: every single GL tutorial in the history of ever;
CoreAnimation's scaling filter enumerations.
If people want to start using 1D or 3D textures they they are probably
going to be using Cogl API directly, and that has the GL naming scheme
for minification and magnification filters anyway.
At least for the time being, we only expose the parts of the API that we
want to use internally and for new, out-of-tree Content implementations.
The full PaintNode tree API will be made public in 1.12 once we branch
master.
It's a bit late in the game for changing the emission of the paint
signal with actors that use paint nodes - mostly because we have both
implicit paint nodes (background color, content) and explicit paint
nodes (the paint_node virtual).
When we branch for 1.12 we can revert this change.
It's safer, and consistent with the rest of Clutter, to make sure that
the template pipeline we use for ClutterTextureNode has its wrap mode
set to clamp-to-edge.
Both ClutterCanvas and ClutterImage should use the minification and
magnification filters set on the actor, just like the use the content
box and the paint opacity.
The ::paint signal is the old way to paint an actor; the paint_node()
virtual function is the new way. It's still not possible to traverse the
whole scene graph and build a render tree of PaintNode instances, but
with this change we simultaneously cut out the ::paint signal emission
from the critical path for actors that are using the new PaintNode-based
API, and we retain backward compatibility in the interim period between
1.10 and 2.0.
Instead of our homegrown string building; this at least ensures that
we're generating proper data, instead of random strings. Plus, using
JsonNode and JsonBuilder, we can ask the PaintNode subclasses to
serialize themselves in a sensible way.
ClutterContent is an interface for creating delegate objects that handle
what an actor is going to paint.
Since they are a newly added type, they only hook into the new PaintNode
based API.
The position and size of the content is controlled in part by the
content's own preferred size, and by the ClutterContentGravity
enumeration.
The ::paint-node virtual inside ClutterActor is what we want people to
use when painting their actors.
Right now, it's a new code path, that gets called while painting; the
paint_node() implementation should only paint the actor itself, and not
its children — they will get their own paint_node() called when needed.
Internally, ClutterActor will automatically create a dummy PaintNode and
paint the background color; then control will be handed out to the
implementation on the class. This is required to maintain compatibility
with the old ::paint signal emission.
Once we are able to get rid of the paint (and pick) sequences, we'll
switch to a fully retained render tree.
Now that we have a proper scene graph API, we should split out the
rendering part from the logical and event handling part.
ClutterPaintNode is a lightweight fundamental type that encodes only the
paint operations: pipeline state and geometry. At its most simple, is a
way to structure setting up the programmable pipeline using a
CoglPipeline, and submitting Cogl primitives. The important take away
from this API is that you are not allowed to call Cogl API like
cogl_set_source() or cogl_primitive_draw() directly.
The interesting approach to this is that, in the future, we should be
able to move to a purely retained mode: we will decide which actors need
to be painted, they will update their own branch of the render graph,
and we'll take the render graph and build all the rendering commands
from that.
For the 1.x API, we will have to maintain invariants and the existing
behaviour, but as soon as we can break API, the old paint signal will
just go away, and Actors will only be allowed to manipulate the render
tree.
As it turns out, we do end up recursing inside the ::paint signal
emission - especially inside the conformance test suite.
This thoroughly sucks - and we'll only be able to fix it properly
when we bump API for 2.0.
ClutterActor should be able to hold all transitions, even the ones that
have been explicitly created.
This will allow to add new transitions types in the future, like the
keyframe-based one, or the transition group.
It should be possible to ask a timeline what is its duration, taking
into account eventual repeats, and which repeat is the one currently
in progress.
These two functions allow writing animations that depend on the current
state of another timeline.
It should be possible to set up the delay of a transition, but since
we start the Transition instance before returning control to the caller,
we cannot use clutter_actor_get_transition() to do it without something
extra-awkward, like:
transition = clutter_actor_get_transition (actor, "width");
clutter_timeline_stop (transition);
clutter_timeline_set_delay (transition, 1000);
clutter_timeline_start (transition);
for each property involved. It's much easier to add a delay to the
easing state of an actor.
Clutter is meant to be, and I quote from the README, a toolkit:
for creating fast, compelling, portable, and dynamic graphical
user interfaces
and yet the default mode of operation for setting an actor's state on
the scene graph (position, size, opacity, rotation, scaling, depth,
etc.) is *not* dynamic. We assume a static UI, and then animate it.
This is the wrong way to design an API for a toolkit meant to be used to
create animated user interfaces. The default mode of operation should be
to implicitly animate every state transition, and only allow skipping
the animation if the user consciously decides to do so — i.e. the design
tenet of the API should be to make The Right Thing™ by default, and make
it really hard (or even impossible) to do The Wrong Thing™.
So we should identify "animatable" properties, i.e. those properties
that should be implicitly animated by ClutterActor, and use the
animation framework we provide to tween the transitions between the
current state and the desired state; the implicit animation should
happen when setting these properties using the public accessors, and not
through some added functionality. For instance, the following:
clutter_actor_set_position (actor, newX, newY);
should not make the actor jump to the (newX, newY) point; it should
tween the actor's position between the current point and the desired
point.
Since we have to maintain backward compatibility with existing
applications, we still need to mark the transitions explicitly, but we
can be smart about it, and treat transition states as a stack that can
be pushed and popped, e.g.:
clutter_actor_save_easing_state (actor);
clutter_actor_set_easing_duration (actor, 500);
clutter_actor_set_position (actor, newX, newY);
clutter_actor_set_opacity (actor, newOpacity);
clutter_actor_restore_easing_state (actor);
And we can even start stacking animations, e.g.:
clutter_actor_save_easing_state (actor);
clutter_actor_set_easing_duration (actor, 500);
clutter_actor_set_position (actor, newX, newY);
clutter_actor_save_easing_state (actor);
clutter_actor_set_easing_duration (actor, 500);
clutter_actor_set_easing_mode (actor, CLUTTER_LINEAR);
clutter_actor_set_opacity (actor, newOpacity);
clutter_actor_set_depth (actor, newDepth);
clutter_actor_restore_easing_state (actor);
clutter_actor_restore_easing_state (actor);
And so on, and so forth.
The implementation takes advantage of the newly added Transition API,
which uses only ClutterTimeline sub-classes and ClutterInterval, to cut
down the amount of signal emissions and memory management of object
instances; as well of using the ClutterAnimatable interface for custom
properties and interpolation of values.
As a convenience for the C API.
Language bindings should already be using the GValue variants.
This commit also moves the custom progress functions out of the
clutter-interval.c, as they are meant to be generic interpolation
functions and not ClutterInterval-specific.
The ::paint, ::queue-redraw, and ::queue-relayout signals should be
marked as no-recurse and no-hooks; these signals are emitted *a lot*
during each frame, and since GLib has a bunch of optimizations for
signals with no closures, we should try and squeeze every single CPU
cycle we can.
Dist clutter-version.h for use under non-autotools-based build
environments (e.g. MSVC) as this header is now generic under the
systems Clutter supports
Checked with Emmanuele Bassi on IRC.
The frame_budget member of ClutterMasterClock is only enabled when
CLUTTER_ENABLE_DEBUG is enabled, so fix the build with this.
Checked with Emmanuele Bassi on IRC.
Normally this leak goes unnoticed because basic fundamental types
are typically used with clutter_actor_animate(), the leak shows up
if boxed or object types are passed (such as ClutterVertex in the
case I stumbled upon).
The ClutterBrightnessContrastEffect effect class allows changing the
brightness and contrast levels of an actor.
Modified-by: Emmanuele Bassi <ebassi@linux.intel.com>
Modified-by: Neil Roberts <neil@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=656156
We can use the __COUNTER__ macro or, failing that, the __LINE__ macro to
ensure that we don't declare dummy variables more than once with the
same name.
The comment says that we're going to load textures in a loop until we
still have work to do, or if one iteration took more than 5
milliseconds, to avoid blowing up our frame budget, but the check is for
5 seconds, which is hardly a sensible value.
We remove 2 pixels from the height of the cursor, but we should also
remove the same amount from the position on the y axis, so that the
cursor caret appears centered in the allocated height.
https://bugzilla.gnome.org/show_bug.cgi?id=655491
ClutterScript should be able to automatically call gettext() and friends
on strings loaded from a UI definition, prior to passing the string to
the object it is constructing.
The basic implementation is trivial:
- set a translation domain on the ClutterScript instance
- mark the translatable strings inside the JSON data, like:
"property" : {
"translatable" : true,
"string" : "a translatable string"
}
The hard part is now getting the tools we use to extract the
translatable strings to understand the JSON format we use inside
ClutterScript.
Let's keep a budget of 16.6 milliseconds per frame, and reduce it by the
amount of time spent in each phase of the frame processing. If any phase
goes over the allocated budget then we use the diagnostic mode
facilities to warn the app developer.
It is sometimes useful to be able to have better control on when a
repaint function is called. Currently, all repaint functions are called
prior to the stages update phase of the frame processing.
We can introduce flags to represent the point in the frame update
process in which we wish Clutter called the repaint function.
As a bonus, we can also add a flag that causes adding a repaint function
to spin the master clock.
In theory, handlers connected to the ::allocation-changed signal may be
able to modify the actor's real allocation and allocation flags,
especially now that we use STATIC_SCOPE; let's avoid this, so that we
don't regret it later.
The show and hide implementation inside ClutterStage ended up being
recursive, and the hide implementation would actually show the children
of the stage unconditionally.
Whoopsie.
The ActorBox passed to the ::allocation-changed signal should be
annotated as STATIC_SCOPE, given that it's a pointer to a structure
inside ClutterActorPrivate - hence there's no risk of it actually being
freed from a signal handler. This allows the GSignal machinery to avoid
a costly copy/free for each signal emission.
If the redraw entry is not cleared, queueing a redraw from a signal
handler could reinsert the same object in the stage redraw list,
causing the segfault later (as the object is immediately freed)
https://bugzilla.gnome.org/show_bug.cgi?id=671173
This just adds some padding pointers so that we can later add more
virtual functions without breaking ABI.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Clutter applications using evdev are typically fullscreen applications
associated with a single virtual termainal. When switching away from
the applications associated tty then Clutter should stop managing all
evdev devices and re-probe for devices when the application regains
focus by switching back to the tty. To facilitate this, this patch
adds clutter_evdev_release_devices() and clutter_evdev_reclaim_devices()
functions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
When using the Wayland backend this sets a constraint that the
CoglRenderer selects the Wayland EGL winsys.
When a Wayland compositor display is set it now also sets a constraint
that the render should use EGL because only EGL renderers will set up
the required wl_drm global object.
The X11 backend now sets the X11 constraint.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The core input devices when XInput doesn't work were being created as
generic ClutterInputDevices instead of ClutterInputDeviceX11s. This
meant the keycode_to_evdev virtual wouldn't work.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a virtual function to ClutterInputDevice to translate a
keycode from the hardware_keycode member of ClutterKeyEvent to an
evdev keycode. The function can fail so that input backends that don't
have a sensible way to translate to evdev keycodes can return FALSE.
There are implementations for evdev, wayland and X. The X
implementation assumes that the X server is using an evdev driver in
which case the hardware keycodes are the evdev codes plus 8.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Because evdev isn't associated with the display system, it doesn't
have any easy way to associate an input device with a stage.
Previously Clutter would never set a stage for an input device and
leave it up to the application to set it. To make it easier for
applications which just have a single fullscreen stage (which is
probably the most common use case for evdev) the device manager now
associates all input devices with the first stage that is created
unless something has already set a stage.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The shm buffer format enum values were renamed and the explicitly
premultiplied format was dropped since it's now assumed if the buffer
has an alpha component then it's premultiplied.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The pick method doesn't do anything special over the default pick
method provided by ClutterActor so there's no need to implement it.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a signal that's emitted whenever a wayland surface is damaged
that allows sub-classes to override the default handler to change
how clipped redraws are queued if the sub-class doesn't simply draw
a rectangle. The signal can also be used just to track damage.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a "cogl-texture" gobject property so that a compositor may
listen for notifications of changes to the texture used to paint.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This patch renames the width/height properties to
surface-width/surface-height so that they won't override the
width/height properties of ClutterActor which have different
semantics.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a NEEDS_XKB_UTILS automake conditional that's set to true if
either the wayland backend is enabled or the evdev input backend is
enabled since they both depend on clutter-xkb-utils.c and we need
to avoid listing the file twice since that leads to duplicate symbols
and the build fails.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
When a new buffer is attached and we update the width and height
properties for the surface we now also call clutter_actor_set_size()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a clutter_wayland_surface_get_surface() function for querying
the struct wl_surface * associated with a ClutterWaylandSurface.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This exposes a clutter_wayland_surface_set_surface() function. The
implementation ignores requests to re-set the same surface and since now
has code to cleanup old surface state before setting the new surface.
(previously the surface was construct only so this wasn't necessary)
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
When disposing a ClutterWaylandSurface we now make sure to unref any
pipeline we created and unref any surface buffer textures we created.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
There was a GArray member named damage that wasn't being used which this
patch removes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
If wayland compositor support has been enabled then we make sure to
install the corresponding public headers and a
clutter-wayland-compositor.pc pkgconfig file.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
We currently check for the IN_DESTRUCTION flag inside the
add_child_internal() function.
This check disallows calling methods that change the stacking order
within the destruction sequence, by triggering a critical warning first,
and leaving the actor in an undefined state, which then ends up being
caught by an assertion.
The reproducible sequence is:
- actor gets destroyed;
- another actor, linked to the first, will try to change the
stacking order of the first actor;
- changing the stacking order is a composite operation composed
by the following steps:
1. ref() the child;
2. remove_child_internal(), which removes the reference;
3. add_child_internal(), which adds a reference;
- the state of the actor is not changed between (2) and (3), as
it could be an expensive recomputation;
- if (3) bails out, then the actor is in an undefined state, but
still alive;
- the destruction sequence terminates, but the actor is unparented
while its state indicates being parented instead.
- assertion failure.
The obvious fix would be to decompose each set_child_*_sibling() method
into proper remove_child()/add_child(), with state validation; this may
cause excessive work, though, and trigger a cascade of other bugs in
code that assumes that a change in the stacking order is an atomic
operation.
Another potential fix is to just remove this check here, and let code
doing stacking order changes inside the destruction sequence of an actor
continue doing the work.
The third fix is to silently bail out early from every
set_child_*_sibling() and set_child_at_index() method, and avoid doing
work.
I have a preference for the second solution, since it involves the least
amount of work, and the least amount of code duplication.
See bug: https://bugzilla.gnome.org/show_bug.cgi?id=670647
This solves a crash on GNOME Shell, as compute the extents
for some StWidgets could lead to call st_widget_get_theme_node,
and it is a fatal error to call this on a widget that it not
beed added to a stage.
Make it like the clutter-version.h.in template. Since we aren't having
Windows-specific items in here (such as CLUTTER_FLAVOUR), perhaps we
could get the dllexport stuff in clutter-version.h.in, where it can be
used when necessary, and this file would be gone.
GLib introduced macros that allows defining the lower and upper bounds
of the API to be used by application code.
The lower bound allows to define the minimum version that will trigger
deprecation warnings; the upper bound defines the maximum version that
will trigger compiler warnings for unavailable symbols.
This scheme allows gradually porting application code to a new version
of the API, especially in case of resynchronization after multiple
development cycles.
Now that ClutterActor has a default paint volume, subclasses may wish
to retrieve it without chaining up to the parent's implementation of
the get_paint_volume() function.
The get_default_paint_volume() returns a ClutterPaintVolume pointer
to the paint volume as computed by the default implementation of the
get_paint_volume() virtual function; it can only be used immediately,
as it's not guaranteed to survive across multiple frames.
Creating PaintVolume instances is not possible, and it's not recommended
anyway. It is, though, necessary to union paint volumes, especially with
2D boxes, in some cases.
Clutter should provide a simple convenience function that allows
unioning volumes to boxes in a moderately efficient way.
https://bugzilla.gnome.org/show_bug.cgi?id=670021
It should be possible to adapt the abicheck.sh script so that it
actually tests the ABI of libclutter-1.0.so taking into account
the backends that were compiled into Clutter, and avoid expected
failures if Clutter was not built with a specific backend.
https://bugzilla.gnome.org/show_bug.cgi?id=670680
We cannot deprecate ClutterAlpha yet. We cannot also implement
ClutterAlpha in terms of ClutterTimeline, because multiple Alpha
instances can be attached to the same Timeline. So we can start
with a "soft" deprecation: just a warning in the documentation
stating that ClutterAlpha will be deprecated, and removed, in the
future, and that newly-written code should use ClutterTimeline
instead.
We can use ClutterTimeline and its progress mode inside
ClutterAnimation; obviously, we have to maintain the invariants because
of the ClutterAnimation:alpha property, but if all you set is the :mode
property using one of the Clutter animation modes then we can skip the
ClutterAlpha entirely.
Instead of having the easing functions be dependent of ClutterAlpha, and
static to the clutter-alpha.c source file, we should make them generic
and move them to their own internal header and source files. This will
allow to re-use them in the near future.
Since Cogl has started restricting what cogl 1.x api is exposed when
COGL_ENABLE_EXPERIMENTAL_2_0_API is defined and since we build all
Clutter internals with COGL_ENABLE_EXPERIMENTAL_2_0_API defined this
patch makes a first pass at reducing our internal use of the Cogl 1.x
api.
The most notable api that's no longer exposed to us internally is
the cogl_material_ api so this switches all Clutter internals to use the
cogl_pipeline_ api instead. This patch also makes quite a bit of
progress removing internal uses of CoglHandle although there is still
more to go.
The experimental cogl_texture_pixmap_x11_new() api was recently changed
to take an explicit context argument and return a GError on failures.
This updates Clutter's use of the api accordingly.
We were only exposing clutter_backend_get_cogl_context() if
COGL_ENABLE_EXPERIMENTAL_2_0_API had been defined but the CoglContext
api is also available if COGL_ENABLE_EXPERIMENTAL_API has been defined.
As it was it meant that code opting into the experimental Cogl api
but not limiting to the 2.0 only api would have to #define
COGL_ENABLE_EXPERIMENTAL_2_0_API before including clutter.h but make
sure it wasn't defined when including cogl.h which was particularly
awkward.
Recently the cogl_framebuffer_swap_* apis were moved into the
cogl_onscreen_* namespace since only CoglOnscreen framebuffers can be
double buffered. This renames all uses of the cogl_framebuffer_swap_*
apis in Clutter.
The experimental cogl_pipeline_new() api was recently changed so it
explicitly takes a CoglContext. This updates all calls to
cogl_pipeline_new() in clutter accordingly.
ATK_ROLE_CANVAS is not a suitable role, as the user (in general) can't
draw on the Stage. CallyStage implements AtkWindow, so the proper role
is ATK_ROLE_WINDOW
Removing atkcomponent, focus_tracker, etc. Emitting focus state change
from the stage. Now things are more simple, and stop to use some
of the soon-to-be-deprecated signals on ATK.
It should be possible to do:
clutter_stage_set_fullscreen (stage, TRUE);
clutter_actor_show (stage);
and have the stage be full screen as soon as it is shown.
Currently, we need to call clutter_actor_realize() prior to calling
set_fullscreen(), otherwise the backing X window will not be set,
and ClutterStageX11 will silently discard the change.
If set_fullscreen() was called prior to realization, ClutterStageX11
should delay setting the fullscreen hint until the realize() chain
has been successfully executed.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2515
If you execute the following sequence :
stage = clutter_stage_new ();
clutter_actor_set_size (stage, 1280, 800);
clutter_actor_realize (stage);
Then you end up creating an onscreen buffer of size 1280x800 but
ClutterStageX11 storing the stage size at 640x480.
This patch resync the 2 implementation by using the ClutterStage's
size in both classes when realizing.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=667540
Unconditionally creating CoglPipeline and CoglSnippets inside the class
initialization functions does not seem to be enough when dealing with
headless builds.
Our last resort is to lazily create the base pipeline the first time we
try to copy it, during the instance initialization.
The class initialization function may be called when Clutter hasn't been
fully initialized — for instance, when scanning the source with gtk-doc
or with the introspection scanner.
The allocation code for BoxLayout contains a sequence of brain farts
that make it barely working since the synchronization of the layout
algorithm to the one in GtkBox.
The origin of the layout is inverted, and it doesn't take into
consideration a modified allocation origin (for actors the provide
padding or margin).
The pack-start property is broken, and it only works because we walk the
children list backwards; this horribly breaks when a child changes
visibility. Plus, we count invisible children, which leads to
allocations getting insane origins (either close to -MAX_FLOAT or
MAX_FLOAT).
Finally, the allocation is applied twice even for non-animated cases.
https://bugzilla.gnome.org/show_bug.cgi?id=669291
* clutter_wayland_input_device_get_wl_input_device for the input device
* clutter_wayland_stage_get_wl_surface for the Wayland surface
* clutter_wayland_stage_get_wl_shell_surface for the shell surface
This converts the blur, colorize and desaturate effects to use
snippets instead of CoglPrograms. Cogl can handle the snippets much
more efficiently than programs so this should be a performance win. It
also fixes the problem that Cogl would end up recompiling the program
for every instance of the effects because Clutter was not reusing the
same program.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The blur effect needs to pass a uniform to the GLSL shader so that it
can know the texture coordinate offset from one texel to another. To
calculate this the blur effect was previously using the allocation
size of the actor rounded up to the next power of two. Presumably the
assumption was that Cogl would round up the size of the texture to the
next power of two when allocating the texture. However this is not be
true if the driver supports NPOT textures. Also it doesn't take into
account the paint volume of the actor which may cause the texture to
be a completely different size. This patch just changes to directly
use the size of the texture.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Sometimes a subclass of ClutterOffscreenEffect wants to paint with a
completely custom material. In that case it is awkward to modify the
material returned owned by ClutterOffscreenEffect so it makes more
sense to just get the texture and manage its own material.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
All of the pipelines used for ClutterTexture actors share a common
pipeline ancestor created with cogl_pipeline_copy. Previously this
ancestor had a dummy 1x1 texture attached to it so that it would end
up with the same state as the child pipelines that will render with a
texture. Cogl now has a mechanism to specify that a texture will be
used with a pipeline layer without having to create an actual texture.
This patch makes it use that to avoid having an unused texture.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we have N children and the user passes N (or a number beyond N) to
clutter_actor_insert_child_at_index, we should respond by adding the
child at the end, not silently doing nothing.
This should avoid trying to fix the origin of a paint volume set from
the allocation's origin, and thus breaking everything.
A PaintVolume for an actor is defined to be relative to the actor's
modelview unless specifically modified by internal functions; the origin
of an actor's allocation is, on the other hand, parent-relative.
There are times when we don't want to remove all children and count of
the reference count to drop to 0 to ensure destruction; there are cases,
such as managed environments, where it's preferable to ensure that the
children of an actor get actually destroyed.
ClutterActor has a background-color property, now; we should use it for
the Stage, re-implement the color property in terms of background-color.
and deprecate the Stage property.
Being able to easily set the number of repeats has been a request for
the animation framework for some time now. The usual way to implement
this is: connect to the ::completed signal, use a static counter, and
stop the timeline when the counter hits a specific spot.
In the same light as the :auto-reverse property, we can make it easier
to implement this common functionality by adding a :repeat-count
property that, when set, limits the amount of loops that a Timeline can
perform before stopping itself.
In fact, we can implement the :loop property in terms of the
:repeat-count property just by using a sentinel value mapping to
"infinity", and map loop=FALSE to repeat-count=0, and loop=TRUE to
repeat-count=-1.
The clutter_timeline_clone() method was a pretty dumb idea when it was
introduced, back when we still had the ClutterEffectTemplate and the
clutter_effect_* animation API. It has since become an API wart: we
cannot change or add new properties to be cloned without the risk of
breaking existing code. All in all, cloning a GObject is just a matter
of calling g_object_new() with the wanted properties.
Let's deprecate this throwback of the Olden Days™, so that we can remove
it for good once we break for 2.0.
When the ClutterTextBuffer support inside ClutterText was merged, it
introduced a regression that was identified and fixed in bug 659116.
The optimization to not paint empty ClutterText actors is only valid
is the actor is not editable, or if the cursor is not visible.
Courtesy of GLib and GTK+. The abicheck.sh is a simple, Linux-only,
script to check that we're not leaking private symbols, or that the
clutter.symbols file hasn't been updated.
In theory, it should go inside the distcheck phase.
A bunch of private symbols have escaped into the SO; let's rectify this
situation by using the '_' private prefix, or making them static as they
should have been.
Cogl now requires that all applications integrate their main loop with
Cogl so that it can listen for events from winsys. This patch just
adds Cogl's GSource to the main loop.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Some of Cogl's experimental apis have changed so that the buffer apis
now need to be passed a context argument and some drawing apis have been
replaced with cogl_framebuffer_ drawing apis that take explicit
framebuffer and pipeline arguments.
These changes were made as part of Cogl moving towards a more stateless
api that doesn't rely on a global context.
This patch updates Clutter to work with the latest Cogl api and bumps
the required Cogl version to 1.9.5.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Similar to the clutter_actor_iter_remove(), but it'll call destroy()
instead of remove_child().
We can also reimplement the ::destroy default handler using it, and make
it more compact.
There is a typo in the check for a negative index: the index variable
should be index_, not index - unfortunately, the latter can still be
resolved to index(3), so compiler and linker are perfectly happy.
https://bugzilla.gnome.org/show_bug.cgi?id=669730
An editable ClutterText will reset the selection and cursor whenever the
contents are changed — even if those contents are the same. As this may
confuse the user, we should check if we're setting the exact same string,
and bail out if necessary.
The reverse of position_to_coords().
While providing documentation on how to implement it using the
PangoLayout API, I realized that the verbosity of it all, plus the usage
of the Pango API, was not worth it, and decided to expose the method we
are using internally.
GValueArray is on its way to deprecation in GLib; as far as the
ListModel class is concerned, a plain C array of GValue is a perfectly
suitable replacement for the GValueArray usage. It actually is an
improvement, given that it's going to take less memory.
ClutterActor stopped requiring to override the map and unmap virtual
functions some time ago.
Now that ClutterActor implements the Container interface, overriding map
and unmap to control the MAPPED state of the children is pretty much
going to be a source of bugs and misunderstandings.
Plus, the ordering of the unmap, destroy, dispose, and finalize calls
should be be documented properly.
The documentation should clarify all that.
When calling clutter_actor_destroy(), ClutterActor calls
update_map_state() on itself to unset the REALIZED and MAPPED states,
prior to running the dispose() implementation.
The default dispose() will call remove_child() (either directly or
through the Container implementation), which will check for the MAPPED
state and then run update_map_state() again. We use the previously set
MAPPED state to decide whether or not the parent should queue for a
relayout/redraw when removing a visible children.
If the MAPPED flag was cleared prior to remove_child(), though, it'll
always be unset by the time we get to remove_child(), and this will
cause missing redraws/relayouts; we were ignoring this prior the
post-First Apocalypse changes because we were doing:
if (was_mapped)
clutter_actor_queue_relayout (parent);
clutter_actor_queue_redraw (parent);
which is obviously wrong. Once I removed that glaring brain damage from
the remove_child() implementation, bugs started appearing — bugs that
were probably the reason why we introduced that brain damage in the
first place, instead of checking the source of those bugs.
The obvious fix is to avoid clearing up the actor's state on destroy()
until we remove the actor from its parent. This also reduces the amount
of work we do, and the code paths that can potentially go wrong.
Since the code dealing with ClutterShader is pretty self-contained, now,
we can safely move it outside of the main ClutterActor source file and
into its own. This will allow us to just drop a bunch of files when
branching for 2.0.
The YUV support depends on the driver support, and not only not many
drivers support YUV natively: the supported colorspaces are pretty much
useless.
The proper way to do YUV to RGB colorspace conversion on the GPU is to
use a fragment shader; for that, ClutterTexture and Cogl provide enough
API to achieve a good result - see the Clutter-GStreamer implementation,
for instance.
ClutterFixedLayout is the default layout manager for ClutterActor.
Existing subclasses of ClutterActor will get a fixed layout manager
regardless of whether they are going to use it, but since it sets the
CLUTTER_ACTOR_NO_LAYOUT flag, it will introduce regressions on actors
that perform their own layout management.
The CLUTTER_ACTOR_NO_LAYOUT flag was a bit of a mistake in the first
place, as it was introduced as a last minute workaround in the 1.0
process to deal with broken stuff in Moblin. It's going to be a target
for deprecation towards a removal when we start the 2.0 process.
Iterating over children and ancestors of an actor is a relatively common
operation. Currently, you only have one option: start a for() loop, get
the first child of the actor, and advance to the next sibling for the
list of children; or start a for() loop and advance to the parent of the
actor.
These operations can be easily done through the ClutterActor API, but
they all require going through the public API, and performing multiple
type checks on the arguments.
Along with the DOM API, it would be nice to have an ancillary, utility
API that uses an iterator structure to hold the state, and can be
advanced in a loop.
https://bugzilla.gnome.org/show_bug.cgi?id=668669
During the gutting of ClutterBox, the destroy and dispose implementation
were removed. The former, especially, destroyed all children - which
usually meant that the redraw queues for the childre was cleared as
well. The removal introduced crashes when a Box was destroyed while its
children were still queueing redraws.
Symbolic names are better than magic numbers, even if they are
well-established and won't likely change.
This maps to a commit in GTK+ that introduced the same names; it
was decided to go for PRIMARY, MIDDLE, and SECONDARY because of
the confusion that may arise when the button order gets flipped
in left-handed configurations - the "left" button (i.e. 1) becomes
the right-most button, and the "right" button (i.e. 3) becomes
the left-most button.
https://bugzilla.gnome.org/show_bug.cgi?id=668692
Also update the code to set the size of the stage to set it to the size of the
output. In future versions of the Wayland protocol we'll get a configure
message advising of us of the size we can be to achieve fullscreen.
* stage-state:
docs: Update ClutterStageState flags
wayland: Use the Stage state tracking
gdk: Use the Stage state tracking
win32: Use the Stage state tracking
x11: Use the Stage state tracking
osx: Use the Stage state tracking
stage: Add state tracking
State changes on the Stage are currently deferred to the windowing
system backends, but the code is generally the same, and it should
be abstracted neatly inside the Stage class itself.
There's also the extra caveat for backends that state changes on a
Stage must also emit a ClutterEvent of type CLUTTER_STAGE_STATE, a
requirement that needlessly complicates the backend code.
GLib has gained support for compiling ancillary data files into the same
binary blob as a library or as an executable.
We should add this feature to ClutterScript, so that it's possible to
bundle UI definitions with an application.
The only actor that results in a mix of the old Container API and the
new Actor API is ClutterStage. By inheritance, a Stage is a Group, but
we don't want it to behave like a Group - as it already overrides most
of the Actor API, and the reason why it was made as a Group in the
first place was convenience for adding/removing children.
Given that touching Group to make it aware of the new Actor API has
rapidly devolved into a struggle between a Demiurge that tries to
avoid breakage and a Chaos that finds new and interesting ways to
break ClutterGroup, let's declare API bankruptcy here and now.
ClutterStage should override ClutterContainer methods, and use the
layout management of ClutterFixedLayout as the proper class that it
was meant to be ages ago. Let ClutterGroup rot in pieces.
Now that we reinstated Group to its "former glory", we need to ensure
that applications using the deprecated containers with the new DOM API
in ClutterActor can actually work - or, at least, not break horribly.
This actually means making sure that ClutterStage and ClutterGroup can
cope with the DOM, while retaining their old implementations, as well as
their bizarre idiosyncrasies and their utter, utter brokenness.
Making Group just a proxy to Actor broke some behaviour that application
and toolkit code was relying on. Let's keep Group around to fight
another day.
This commit fixes gnome-shell as far as I can test it.
A Group is a just a ClutterActor with the layout-manager property set at
instance initialization time. It doesn't need anything else from
ClutterActor's vtable, except the slightly custom show_all/hide_all
implementation, and a simplified get_paint_volume.
Instead of chaining up, given that we want to bypass chaining up and
just set the allocation. This also allows us to bail out of the
overridden allocate vfunc check, given that we want the default Actor
behaviour to apply - including eventual layout manager delegates.
The usual way to implement a container actor is to override the
allocate() virtual function, chain up, and then allocate the actor's
children.
Clutter now has the ability to delegate layout management to
ClutterLayoutManager directly; in the allocation, this is done by
checking whether the actor has children, and then call
clutter_layout_manager_allocate() from within the default implementation
of the ClutterActor::allocate() vfunc. The same vfunc that everyone, has
been chaining up to.
Whoopsie.
Well, we can check if there's a layout manager, and if it's NULL, we
bail out. Except that there's a default layout manager, and it's the
fixed layout manager, so that classes like Group and Stage work by
default.
Double whoopsie.
The fix for this scenario is a bit nasty; we have to check if the actor
class has overridden the allocate() vfunc or not, before actually
looking at the layout manager. This means that classes that override the
allocate() vfunc are expected to do everything that ClutterActor's
default implementation does - which I think it's a fair requirement to
have.
For newly written code, though, it would probably be best if we just
provided a function that does the right thing by default, and that
you're supposed to be calling from within the allocate() vfunc
implementation, if you ever chose to override it. This new function,
clutter_actor_set_allocation(), should come with a warning the size of
Texas, to avoid people thinking it's a way to override the whole "call
allocate() on each child" mechanism. Plus, it should check if we're
inside an allocation sequence, and bail out if not.
If we want to set a default layout manager, we need to do so inside
init(), as it's not guaranteed that people subclassing Actor and
overriding ::constructed will actually chain up as they should.
The default pick() behaviour does not take into consideration the
children of a ClutterActor because the existing containter actors
usually override pick(), chain up, and then paint their children.
With ClutterActor now a concrete class, though, we need a way to pick
its children without requiring a sub-class; we could simply iterate over
the children inside the default pick() implementation, but this would
lead to double painting, which is not acceptable.
A moderately gross hack is to check if the Actor instance did override
the pick() implementation, and if it is not the case, paint the children
in pick mode.
The hide_all() method is pretty much pointless, as hiding an actor will
automatically prevent its children from being painted. The show_all()
method would only be marginally useful, if actors weren't set to be
visible by default when added to another actor - which was the case when
we introduced show_all() and hide_all().
* Abstracts the buffer for text in ClutterText
* Allows implementation of undo/redo.
* Allows use of non-pageable memory for text
in the case of sensitive passwords.
* Implement a test with two ClutterText using the same
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=652653
When dereferencing GArray.data to a C structure you need a double cast
from guint8* to void*, and then from void* to the actual type. This
avoids compiler warnings, especially when using clang on OSX.
The concept of "internal child" only meant anything when we had a
separate API for containers and actors. Now that we plugged that
particular hole, we can drop all the hacks we used to have in place
to work around its design limitations.
It can be convenient to be able to set, or get, all the components of an
actor's margin at the same time; since we already have a boxed type for
storing a margin, an accessors pair based on it is not a complicated
addition to the API.
Inside the set_child_[above|below]_sibling() and set_child_at_index() we
should be using the internal API for mutating the children list, instead
of the delegate functions. This ensures that we go through a single,
well-defined code path for all operations on the list of children of
an actor.
We have a replacement in ClutterActor, now.
The old ClutterContainer API needs to be deprecated, and the raise() and
lower() virtual functions need a default implementation, so we can check
for implementations overriding them, by using the diagnostic mode like
we do for add(), remove(), and foreach().
The sort_depth_order() virtual function just doesn't do anything, as it
should have been made ages ago.
The Actor wrappers for the Container methods also need to be deprecated.
ClutterActor provides four methods for changing the paint sequence order
of its children:
raise_top()
raise()
lower()
lower_bottom()
The first and last one being just wrappers around raise() and lower(),
respectively. These methods have various issues: they omit the parent,
preferring to retrieve it from the actor passed as the first argument;
this does not match the new style of API introduced to operate on the
list of children of an actor.
Additionally, the raise() and lower() methods of ClutterActor call into
the Container interface, and are not really aptly named (raise() in
particular collides with the completely unrelated 'raise' keyword in
Python, and usually needs to be wrapped in order to be used at all).
Furthermore, we need public methods that Container can call from its
default implementation, as well as methods to port current Container
implementations.
Finally, since we have insert_child_at_index(), we should also have an
equivalent set_child_at_index() as well.
The internal versions of add_child() and remove_child() currently use
boolean arguments to control things like the ChildMeta instances and
the emissions of signals; using more than one boolean argument is an
indication that you need flags to avoid readability issues, as well as
providing a way to add new behaviours without a combinatorial explosion
of arguments, later on.
I don't feel comfortable with this feature, and its implementation
still has too many rough edges. We can safely punt it for now, and
introduce it at a later point, as it doesn't block existing features
or API.
This virtual function will let layout managers with legacy expansion
flags be able to influence the lazy computation of the expansion flags
on ClutterActor.
We need to paint the background color in the default class handler for
two reasons: it's logically appropriate, and we don't want actor
subclasses overriding the ::paint class handler to change behaviour only
because somebody decided to set the background color.
The old add(), remove(), and foreach() virtual functions are deprecated;
ClutterContainer should warn if the public API detects that the vfuncs
have been overridden.
Strictly speaking, it's still legal to override those vfuncs: you can
chain up to the default vtable, or you could just provide an equivalent
implementation. The goal is to avoid having to override the Container
interface, until we can safely deprecate it and remove it in Clutter
2.0.
Instead of making ClutterActor implement the basic add/remove/foreach
virtual functions of ClutterContainer, we can simply do that from
within the ClutterContainer implementation.
The get_children(), foreach(), and foreach_with_internals() methods and
virtual functions are superceded by the Actor API, and should not be
used in newly written code.
Given the size and scope of the changes in ClutterActor, we ought to
rewrite the overall description of what an actor is, what it does, and
how are you supposed to use it and subclass it.
This will make things interesting.
We have better replacements in ClutterActor, that do The Right Thing™
instead of deferring control and requiring reimplementation in every
single container actor.
The correct sequence of actions should be remove(old) → insert(new), not
insert(new) → remove(old). We can implement a simple delegate insertion
functions to insert the new child between the previous and next siblings
of the old child.
While we're at it, let's also add a unit test for replace_child().
Providing a default get_paint_volume() that takes into account the
children of an actor was a goal of the whole First Apocalypse; if we
make all the containers rely on it, and yet we return a FALSE value
(meaning: we don't have a valid paint volume) even when we do have it,
then we are going to break the whole machinery, though.
Cally is doing a bunch of list traversals through the list returned by
ClutterContainer.get_children(); this means a traversal already, plus
a bunch of allocations. We can do better than that, now that we have
a proper graph iteration API inside ClutterActor.
The insert_child_at_index, insert_below and insert_above messed up the
first and last child pointers in various cases. This commit fixes all
the instances of first and last child pointers being stale or set to
NULL.
Instead of getting the list of children to iterate over it, let's use
the newly added child iteration API; this should save us a bunch of
allocations, as well as indirections.
Ported: ClutterBinLayout and ClutterBoxLayout.
Instead of requiring every consumer of the ClutterActor API that wishes
to iterate over the children of an actor to use the get_children()
method, we should provide an iteration API directly inside ClutterActor
itself.
Instead of storing the list of children, let's turn Actor inside a
proper node of a tree.
This change adds the following members to the Actor private data
structure:
first_child
last_child
prev_sibling
next_sibling
and removes the "children" GList from it; iteration is performed through
the direct pointers to the siblings and children.
This change makes removal, insertion before a sibling, and insertion
after a sibling constant time operations, but it still retains the
feature of ClutterActor.add_child() to build the list of children while
taking into account the depth set on the newly added child, to allow the
default painter's algorithm we employ inside the paint() implementation
to at least try and cope with the :depth property (albeit in a fairly
naïve way). Changes in the :depth property will not change the paint
sequence any more: this functionality will be restored later.
ClutterTransformInfo is a (private) ancillary data structure that
contains all the decomposed transformation data, i.e. rotation angles
and centers, scale factors and centers, and anchor point. This data
structure is stored in the GData of the actor instance instead of the
actor's private data. This change gives us:
• a smaller, cleaner private data structure;
• no size penalty for untransformed actors;
• static constant storage for the defaults, shared across all
instances;
• cache locality for all the decomposed transformation data,
given that the structure size is smaller.
At the end of the day, the only authoritative piece of information for
actor transformation is the CoglMatrix that we initialize in
apply_transform() from all the decomposed parameters, and that can stay
inside the private data structure of ClutterActor.
There are only two kinds of actors that allow underallocations,
according to the API contract:
• ClutterStage, as it is a viewport and it doesn't have an implicit
minimum size;
• Actors using the CLUTTER_ACTOR_NO_LAYOUT escape hatch, which allows
them to bail out from our layout management policies.
The warning about underallocations should take these two exceptions
under consideration.
The Group functionality is now provided by ClutterActor.
Sadly, we need to keep the ClutterGroup structure definition in the
non-deprecated header because ClutterStage inherits from Group - an API
wart that was never fixed during the 0.x cycles, and that we'll have to
keep around until we can break API.
ClutterBox functionality has been implemented by ClutterActor, and
proxied by the Box subclass; with the removal of the abstract bit on
ClutterActor, we can safely deprecated ClutterBox.
ClutterActor now has all the API and capabilities for being a concrete
class:
- layout management, through delegation
- container implementation and API
- background color
This means that a simple scene can be built straight out of actors
without using subclasses except for the Stage.
This is the first step towards the deprecation of most of the Actor
subclasses provided by Clutter.
ClutterActor can do better by default than just giving up immediately.
An actor can check for the clip region, and for its children's paint
volume, for instance.
Just these two should give us a better default implementation for newly
written code.
The minimum preferred size of a Flow layout manager is the size of a
column or a row, as the whole point of the layout policy enforced by
the Flow layout manager is to reflow when needed.
ClutterBox's color and color-set properties can be implemented as
proxies for the ClutterActor's newly added background-color and
background-color-set properties, respectively.
This also allows us to get rid of the paint() implementation inside
ClutterBox altogether.
Each actor should have a background color property, disabled by default.
This property allows us to cover 99% of the use cases for
ClutterRectangle, and brings us one step closer to being able to
instantiate ClutterActor directly.
And make sure that overriding Container and calling
clutter_actor_add_child() will result in the same sequence of operations
as the current set_parent()+queue_relayout()+signal_emit pattern.
Existing containers can continue using:
clutter_actor_set_parent (child, CLUTTER_ACTOR (container));
clutter_actor_queue_relayout (CLUTTER_ACTOR (container));
g_signal_emit_by_name (container, "actor-added", child);
and newly written containers overriding Container.add() can simply call:
clutter_actor_add_child (CLUTTER_ACTOR (container), child);
instead.
We need to queue a relayout when removing a visible child from a visible
parent.
We also need to insert the child at the right position (depending on the
depth) so that newly added actors will be painted on top.
Remove four more floats from ClutterActorPrivate.
The fixed minimum and natural sizes should be stored inside the
ClutterLayoutInfo structure, along with the fixed position.
Add a failsafe against a NULL parent, to avoid a segfault when calling
clutter_actor_allocate() on the Stage.
We also need to deal with floating point values: straight comparison is
not going to cut it.
ClutterActor has various properties controlling the allocation:
- x-align, y-align
- margin-top, margin-bottom, margin-left, margin-right
These properties should adjust the ClutterActorBox passed from the
parent actor to its children when calling clutter_actor_allocate(),
so that the child can just allocate its children at the right origin
with the right available size.
The actor class should be able to hold the margin offsets like it does
for expand and alignment flags.
Instead of filling the private data structure with data, we should be
able to use an ancillary data structure, given that all this data is
optional and might never be set in the first place.
In case no layout manager was set during construction, we fall back to a
FixedLayout. The FixedLayout has the property of making the fixed
positioning and sizing API, as well as the various Constraints, work
out of the box.
Now that ClutterActor implements the Container contract we can actually
defer the size negotiation to a ClutterLayoutManager directly from the
default implementation of the Actor's virtual functions.
We can provide most of the ClutterContainer implementation directly
within ClutterActor — basically removing the need of having the
Container interface in the first place. For backward compatibility
reasons we can keep the interface, but let Actor implement it directly.
Let's try and move away from the reverse implicit scene graph build API,
which we mutuated from GTK+, towards a more traditional node/child API.
The set_parent()/unparent() API is confusing, unless you know the
history; having a add_child()/remove_child() methods pair makes it more
explicit.
We can easily implement the old set_parent()/unparent() pair in terms of
the newly add_child()/remove_child() one.
Enclose the check inside a #ifdef CLUTTER_ENABLE_DEBUG ... #endif, so
that we can compile it out; also, use g_string_append() instead of the
g_string_append_printf() function, given that we're just concatenating
strings.
The ::redraw virtual function was a throwback from olden times, and has
been thoroughly replaced by the equivalent vfunc on the StageWindow
interface. We can safely remove it, now, and simplify the flow of the
redraw code inside ClutterStage.
Semantic changes to Wayland means that we cannot rely on the compositor
setting a pointer buffer for us if set it to nil. The first part of fixing
this is to create an shm buffer containing the bytes for our cursor.
The best way to do this currently is to load the cursor from the well known
location where weston instals its cursor images. The code to implemente this
was derivedlifted from the Wayland backend in GTK+.
Currently, we're emitting the ClutterActor::destroy at the end of the
dispose implementation - right before we chain up to the parent
implementation.
The point of emission makes the ::destroy signal handlers able to just
use the actor pointer - as the actor state will have been mostly cleared
by the time application can run. This (undocumented) behaviour severely
limits the amount of things you can do inside a ::destroy signal
handler, thus making the ::destroy signal just a weird weak reference,
instead of a proper way to break application reference cycles.
Given that this change relaxes some of the conditions, this change
should be safe - obviously, if anything happens, we'll back it out; the
conformance and interactive tests confirm that, for common patterns of
usage, this change does not break existing code.
GLib has a nice, atomic object clearing function that allows us to drop
code looking like:
if (priv->object != NULL)
{
g_object_unref (priv->object);
priv->object = NULL;
}
from the ::dispose implementation.
I always have to think twice before returning a value from an event
signal handler, and I've been writing them for the past 10 years, so
it's conceivable that application developers that start with Clutter
will find them confusing as well.
Simple symbolic names should be easier to use.
The depth cueing through GL fog has been broken for a long while, now.
The fog-related API in Clutter is ridiculously limited, and harks back
to simpler times; the ClutterFog structure is not enough to express all
the GL fog machinery, and required application code to connect to the
Stage's paint implementation and drop into Cogl directly.
Additionally, the fixed pipeline fog machinery in GL simply does not
work with premultiplied alpha, unless you use a shader - and in that
case it would only work for textures. Let's deprecate it, and just
don't do anything if somebody has the brilliant idea of setting the
:use-fog property to TRUE.
Sadly, we need to remove the G_GNUC_NULL_TERMINATED annotation from
ClutterBox packing API; the compiler will otherwise emit a warning
for perfectly legal statements like:
clutter_box_pack (box, child, NULL);
because of the missing sentinel.
See also: g_object_new().
GLib has a "diagnostic mode" switch that can be checked to enable debug
messages on deprecated properties and signals, as these are purely
run-time constructs, and as such cannot be caught by compiler warnings.
The diagnostic mode is toggled by a simple environment variable, and
can be used to ease porting of application code.
We can use something similar to mark deprecated virtual functions and
other run-time constructs; to avoid collisions, we should use our own
environment variable, CLUTTER_ENABLE_DIAGNOSTIC.
Instead of using a PaintVolume for a 2D region, and an internal
function, use the newly added queue_redraw_with_clip() method.
This removes the last bit of internal API usage in the
ClutterX11TexturePixmap actor.
https://bugzilla.gnome.org/show_bug.cgi?id=660997
Add a public version of the clipped queue redraw, using a 2D clip. This
allows implementing actors with trackable 2D clipped regions, like the
ClutterX11TexturePixmap, outside of Clutter itself.
https://bugzilla.gnome.org/show_bug.cgi?id=660997
The Wayland protocol now has events represent when a pointer enters the
surface and when it leaves again.
For leaves the surface is not set in the event, for enters the surface is set.
Simply use this to determine whether to emit CLUTTER_ENTER or CLUTTER_LEAVE.
Previously the wl_shell object held the methods that allowed a client to
request changes to the shell's state associated with a surface. These methods
have now been moved to a wl_shell_surface object.
This change allows configure events to be handled inside the stage rather than
the backend.
This makes the option_xkb_* symbols declared for the evdev device manager
and the wayland device manager private so we don't get symbol collisions
if both of these backends are enabled.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
this fixes how clutter-device-manager-evdev.h is included to fix a build
problem caused by not being able to find the header.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This updates the evdev input backend code to compile and also updates
the code to not refer to the default stage and instead check for a
stage to be associated with the input device. If no stage is currently
associated with a device generating events then the events are dropped
on the floor.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds internal api to be able to query the stage currently
associated with a given input device so input backends shouldn't need to
refer to the default stage.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This adds a --enable-wayland-compositor configure option which will add
support for a ClutterWaylandSurface actor which can be used to aid in
writing Wayland compositors using Clutter by providing a ClutterActor to
represent Wayland client surfaces.
Notably this configure option isn't tied into any particular backend
since conceptually the compositor support can be used in conjunction
with any clutter backend that has corresponding Cogl support.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This updates Wayland support in line with upstream changes to the Wayland
API and protocol.
This update means we no longer use the Cogl stub winsys so a lot of code
that had to manually interact with EGL and implement a swap_buffers
mechanism could be removed and instead we now depend on Cogl to handle
those things for us.
This update also adds an input device manager consistent with other
clutter backends.
Note: to use the client side "wayland" clutter backend you need to have
built Cogl with --enable-wayland-egl-platform. If Cogl has been built
with support for multiple winsys backends then you should run
applications with COGL_RENDERER=EGL in the environment.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Generate a .bat file to generate the clutter-enum-types.[ch] for use
during the Visual C++ build process, which will greatly simplify the
maintenanace of the VS build files as public headers are added or removed
during the development process.
ClutterInputDeviceX11 has been made private, so we cannot access it from
outside of clutter-input-device-core-x11.c. We should have simple
accessors for the min/max keycode, which is the only detail that we use.
