They have been deprecated for a long time, and all their uses in clutter
and mutter has been removed. This also removes some no longer needed
legacy state tracking, as they were only ever excercised in certain
circumstances when there was sources (pipelines or materials) on the now
removed source stack.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
This means cogl_set_source_color*() that switches to the opaque or
blending pipeline, or cogl_source_set_texture() which switches to the
texture pipeline.
Left is the opaque pipeline, as it is still used to compare other
pipelines to check whether they are opaque or not, and as the default
pipeline still pushed to the source stack during initialization.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
Change the warp modes test to sanity check CoglPrimitive based polygon
drawing instead of cogl_polygon(). This removes some checks, as
cogl_polygon() has explicitly documented special behaviour for automatic
wrap modes, which CoglPrimitive does not.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
When painting, actors rely on semi global state tracked by the state to
get various things needed for painting, such as the current draw
framebuffer. Having state hidden in such ways can be very deceiving as
it's hard to follow changes spread out, and adding more and more state
that should be tracked during a paint gets annoying as they will not
change in isolation but one by one in their own places. To do this
better, introduce a paint context that is passed along in paint calls
that contains the necessary state needed during painting.
The paint context implements a framebuffer stack just as Cogl works,
which is currently needed for offscreen rendering used by clutter.
The same context is passed around for paint nodes, contents and effects
as well.
In this commit, the context is only introduced, but not used. It aims to
replace the Cogl framebuffer stack, and will allow actors to know what
view it is currently painted on.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/935
This is inspired by 98892391d7 where the usage of
`g_signal_handler_disconnect()` without resetting the corresponding
handler id later resulted in a bug. Using `g_clear_signal_handler()`
makes sure we avoid similar bugs and is almost always the better
alternative. We use it for new code, let's clean up the old code to
also use it.
A further benefit is that it can get called even if the passed id is
0, allowing us to remove a lot of now unnessecary checks, and the fact
that `g_clear_signal_handler()` checks for the right type size, forcing us
to clean up all places where we used `guint` instead of `gulong`.
No functional changes intended here and all changes should be trivial,
thus bundled in one big commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/940
The function create_texture() in test-wrap-modes.c takes a
TestUtilsTextureFlags. However a CoglTextureFlags is passed instead
in two calls. As the enums are identical this patch changes it to
use the TestUtils type.
The enum definitions:
typedef enum
{
COGL_TEXTURE_NONE = 0,
COGL_TEXTURE_NO_AUTO_MIPMAP = 1 << 0,
COGL_TEXTURE_NO_SLICING = 1 << 1,
COGL_TEXTURE_NO_ATLAS = 1 << 2
} CoglTextureFlags;
typedef enum
{
TEST_UTILS_TEXTURE_NONE = 0,
TEST_UTILS_TEXTURE_NO_AUTO_MIPMAP = 1 << 0,
TEST_UTILS_TEXTURE_NO_SLICING = 1 << 1,
TEST_UTILS_TEXTURE_NO_ATLAS = 1 << 2
} TestUtilsTextureFlags;
https://gitlab.gnome.org/GNOME/mutter/merge_requests/938
In _cogl_offscreen_gl_allocate we only want to perform certain actions if
COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL is not set in create_flags.
We perfrom this check with:
if (!offscreen->create_flags & COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL)
which is not correct as we negate the create_flags before the bitwise &.
It happens to work as intended though, as CoglOffscreenFlags only has one
element, and that element has the value 1. If the flag is not set then the
nagation of create_flags is true and the bitwise and with the element value
is true as well.
If any flag is set then the negation will give 0 and the bitwise & will be
false.
So while it works correctly it is fragile as either additional flags or a
change in the enum element value will break this check. This patch makes
things a bit more safe by adding parentheses to let the bitwise & happen
before the negation.
Definition of the enum:
typedef enum
{
COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL = 1
} CoglOffscreenFlags;
https://gitlab.gnome.org/GNOME/mutter/merge_requests/938
cogl_pipeline_get_front_face_winding() is supposed to return a CoglWinding. It
takes a CoglPipeline as argument and does the following input validation:
g_return_val_if_fail (cogl_is_pipeline (pipeline),
COGL_PIPELINE_CULL_FACE_MODE_NONE);
The returned COGL_PIPELINE_CULL_FACE_MODE_NONE is not a winding.
The function was added with this check 8 years ago in
5369b3c601
I do not see any of the two options in the CoglWinding as particularly good
choice for a return value on bad input, but let's go with
COGL_WINDING_CLOCKWISE as that is equivalent with the behavior for all
these years.
Definitions of the two enums:
typedef enum
{
COGL_WINDING_CLOCKWISE,
COGL_WINDING_COUNTER_CLOCKWISE
} CoglWinding;
typedef enum
{
COGL_PIPELINE_CULL_FACE_MODE_NONE,
COGL_PIPELINE_CULL_FACE_MODE_FRONT,
COGL_PIPELINE_CULL_FACE_MODE_BACK,
COGL_PIPELINE_CULL_FACE_MODE_BOTH
} CoglPipelineCullFaceMode;
https://gitlab.gnome.org/GNOME/mutter/merge_requests/934
As noted in <cogl-texture-2d-gl.h> (now also removed), this is for
allowing external GL callers to promote one of their textures to a
CoglTexture. We aren't doing that and don't want to start.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/883
Unknown since when, we started deferring the eglMakeCurrent for the
current framebuffer till we started painting on it, which means we
are preparing for rendering a view without guarantees that the
framebuffer we will paint to is the current drawing surface for the
EGL context.
A fairly common case where that assumption will break is multimonitor
set ups, in this case we will be preparing to paint to a view while
the current draw surface is that of the previously rendered view's.
Mesa will in this case return EGL_BAD_SURFACE when querying the buffer
age, since the surface is not yet the current draw surface. This
makes us give up on buffer age checks, and paint the whole view. Since
the problem repeats when painting the next view, we are effectively
doing full-screen redraws on all monitors.
Since cogl usually works implicitly, and querying the buffer age is
meaningless if you're not meant to paint on a surface, make the surface
the current draw surface implicitly before querying the buffer age.
This brings us glorious partial invalidations back when several views
had to be repainted.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/906
In order to avoid log spamming, just warn once it starts to happen, not
on every frame for every onscreen. Just knowing that this is happening
is a hint that something's going wrong.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/906
Say you're using intel gen3, you poor soul. Your big-GL maxes out at 1.5
unless you use dirty tricks, but you do have GLES2. We try to fall back
to GLES in this case, but we only ever say eglBindAPI(EGL_OPENGL_API).
So when we go to do CreateContext, even though we think we've requested
GLES 2.0, the driver will compare that "2.0" against the maximum big-GL
version, and things will fail.
Fix this by binding EGL_OPENGL_ES_API before trying a GLES context.
https://gitlab.gnome.org/GNOME/mutter/issues/635
In find_onscreen_for_xid() we want to loop over the framebuffers
and skip any that is not onscreen.
The code today does this by negating the framebuffer type variable
and skipping if that equals COGL_FRAMEBUFFER_TYPE_ONSCREEN. This
actually works as the enum used will function as a boolean:
typedef enum _CoglFramebufferType {
COGL_FRAMEBUFFER_TYPE_ONSCREEN,
COGL_FRAMEBUFFER_TYPE_OFFSCREEN
} CoglFramebufferType;
But it is a bit weird logic and fragile if more types are added.
(not that I can think of any different type...)
To simplify this, and to silence a warning in clang this patch just
changes it to a != test.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/905
There are still environment variables for these controls, but having
them in a config file doesn't really make sense for mutter. Even if it
did we probably don't want to be parsing the same file as some
standalone version of cogl.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/902
This is a _little_ strange, as we still fill in the vtable slot for
glRenderbufferStorageMultisampleIMG, and can in principle still call it.
But that feature was weird to begin with as we were only checking for
that function in big-GL contexts despite that its extension is for GLES.
I'll leave cleaning that up to a future pass.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/866
This was only promoted to core in 3.0, but Mesa's supported it
unconditionally since around 7.0 even in 2.1 contexts, so this is not a
particularly onerous requirement.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/866
Midscene tracking was used at a time that some Cogl users
could call random OpenGL API without going through Cogl.
That is not allowed anymore, and certainly not done by
Mutter and GNOME Shell.
Remove midscene tracking from CoglFramebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/402
CoglJournal tracks a few OpenGL states so that they can
be batch-applied if necessary. It also has a nice property
of allowing purely CPU-based glReadPixels() when the scene
is composed of simple rectangles.
However, the current journal implementation leaves various
other GL states out, such as dithering and the viewport.
In Clutter, that causes the journal to be flushed when
picking, touching the GPU when we didn't really need to.
Track the viewport of the framebuffer in the journal so that
we can avoid flushing the journal so often.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/402
CoglFramebuffer checks the passed buffer bits in order to
detect when the fast path (that uses the journal) should
be used.
However, it also modifies one of the buffer bits that is
checked for the fast path, meaning we never actually hit
the fast path on cogl_framebuffer_cleaf4f().
Check the depth and color buffer bits before modifying them.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/402
This is an extremely straightforward and minimalistic port of
CoglVector APIs to the corresponding Graphene APIs.
Make ClutterPlane use graphene_vec3_t internally too, for the
simplest purpose of keeping the patch focused.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
As the first step into removing Cogl types that are covered by
Graphene, remove CoglEuler and replace it by graphene_euler_t.
This is a mostly straightforward replacement, except that the
naming conventions changed a bit. Cogl uses "heading" for the
Y axis, "pitch" for the X axis, and "roll" for the Z axis, and
graphene uses the axis themselves. That means the 1st and 2nd
arguments need to be swapped.
Also adapt the matrix stack to store a graphene_euler_t in the
rotation node -- that simplifies the code a bit as well.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
Graphene is a small library with data types and APIs
specially crafted to computer graphics. It contains
performant implementations of matrices, vectors, points
and rotation tools. It is performance because, among
other reasons, it uses vectorized processor commands
to compute various operations.
Add Graphene dependency to Mutter.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
Fog is explicitly deprecated in favour of CoglSnippet API,
and in nowhere we are using this deprecated feature, which
means we can simply drop it without any sort of replacement.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/458
As we will start adding support for more pixel formats, we will need to
define a notion of planes. This commit doesn't make any functional
change, but starts adding the idea of pixel formats and how they (at
this point only theoretically) can have multple planes.
Since a lot of code in Mutter assumes we only get to deal with single
plane pixel formats, this commit also adds assertions and if-checks to
make sure we don't accidentally try something that doesn't make sense.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/858
This is for all intents and purposes the same as
`cogl_object_ref/unref`, but still refers to handles rather than
objects (while we're trying to get rid of the former) so it's a bit of
unnecessary redundant API.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/451
It wasn't necessary (see other instances of -DG_LOG_DOMAIN) and somewhere
along the line it was getting turned into forward slashes becoming a syntax
error:
```
/usr/include/glib-2.0/gobject/gobject.h:767: syntax error, unexpected '/' in
...
g_assertion_message (/"CoglPango/",
```
https://gitlab.gnome.org/GNOME/mutter/merge_requests/841
Threaded swap wait was added for using together with the Nvidia GLX
driver due to the lack of anything equivalent to the INTEL_swap_event
GLX extension. The purpose was to avoid inhibiting the invocation of
idle callbacks when constantly rendering, as the combination of
throttling on swap-interval 1 and glxSwapBuffers() and the frame clock
source having higher priority than the default idle callback sources
meant they would never be invoked.
This was solved in gbz#779039 by introducing a thread that took care of
the vsync waiting, pushing frame completion events to the main thread
meaning the main thread could go idle while waiting to draw the next
frame instead of blocking on glxSwapBuffers().
As of https://gitlab.gnome.org/GNOME/mutter/merge_requests/363, the
main thread will instead use prediction to estimate when the next frame
should be drawn. A side effect of this is that even without
INTEL_swap_event, we would not block as much, or at all, on
glxSwapBuffers(), as at the time it is called, we have likely already
hit the vblank, or will hit it soon.
After having introduced the swap waiting thread, it was observed that
the Nvidia driver used a considerable amount of CPU waiting for the
vblank, effectively wasting CPU time. The need to call glFinish() was
also problematic as it would wait for the frame to finish, before
continuing. Due to this, remove the threaded swap wait, and rely only on
the frame clock not scheduling frames too early.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=781835
Related: https://gitlab.gnome.org/GNOME/mutter/issues/700
[jadahl: Rewrote commit message]
https://gitlab.gnome.org/GNOME/mutter/merge_requests/602
This was introduced in:
commit 010d16f647
Author: Robert Bragg <robert@linux.intel.com>
Date: Tue Mar 6 03:21:30 2012 +0000
Adds initial GLES2 integration support
This makes it possible to integrate existing GLES2 code with
applications using Cogl as the rendering api.
That's maybe a reasonable thing for a standalone cogl to want, but our
cogl has only one consumer. So if we want additional rendering out of
our cogl layer, it makes more sense to just add that to cogl rather than
support clutter or mutter or the javascript bindings creating their own
GLES contexts.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/500
The function will be used in copying from a primary GPU framebuffer to a
secondary GPU framebuffer using the primary GPU specifically when the
secondary GPU is not render-capable.
To allow falling back in case glBlitFramebuffer cannot be used, add boolean
return value, and GError argument for debugging purposes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Depends on "cogl: Replace ANGLE with GLES3 and NV framebuffer_blit"
Allow blitting between onscreen and offscreen framebuffers by doing the y-flip
as necessary. This was not possible with ANGLE, but now with ANGLE gone,
glBlitFramebuffer supports flipping the copied image.
This will be useful in follow-up work to copy from onscreen primary GPU
framebuffer to an offscreen secondary GPU framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Depends on: "cogl: Replace ANGLE with GLES3 and NV framebuffer_blit"
As a possible ANGLE implementation is not longer limiting the pixel format
matching, lift the requirement of having the same pixel format.
We still cannot do a premult <-> non-premult conversion during a blit, so guard
against that.
This will be useful in follow-up work to copy from onscreen primary GPU
framebuffer to an offscreen secondary GPU framebuffer if the formats do not
match exactly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
ANGLE extensions are only provided by Google's Almost Native Graphics Layer
Engine (ANGLE) implementation. Therefore they do not seem too useful for
Mutter.
The reason to drop GL_ANGLE_framebuffer_blit support is that it has more
limitations compared to the glBlitFramebuffer in GL_EXT_framebuffer_blit,
GL_NV_framebuffer_bit, OpenGL 3.0 and OpenGL ES 3.0. Most importantly, the
ANGLE version cannot flip the image while copying, which limits
_cogl_blit_framebuffer to only off-screen <-> off-screen copies. Follow-up work
will need off-screen <-> on-screen copies.
Instead of adding yet more capability flags to Cogl, dropping ANGLE support
seems appropriate.
The NV extension is added to the list of glBlitFramebuffer providers because it
provides the same support as ANGLE and more.
Likewise OpenGL ES 3.0 is added to the list of glBlitFramebuffer providers
because e.g. Mesa GLES implementation usually provides it and that makes it
widely available, again surpassing the ANGLE supported features.
Follow-up patches will lift some of the Cogl assumptions of what
glBlitFramebuffer cannot do.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Public functions in C should be declared before they are defined, and
often compilers warn you if you haven't:
```
../cogl/cogl/cogl-trace.c:237:1: warning: no previous prototype for
‘cogl_set_tracing_enabled_on_thread_with_fd’ [-Wmissing-prototypes]
cogl_set_tracing_enabled_on_thread_with_fd (void *data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../cogl/cogl/cogl-trace.c:245:1: warning: no previous prototype for
‘cogl_set_tracing_enabled_on_thread’ [-Wmissing-prototypes]
cogl_set_tracing_enabled_on_thread (void *data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../cogl/cogl/cogl-trace.c:253:1: warning: no previous prototype for
‘cogl_set_tracing_disabled_on_thread’ [-Wmissing-prototypes]
cogl_set_tracing_disabled_on_thread (void *data)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
In this case the function declarations were not included because
`HAVE_TRACING` isn't defined. But we should still include `cogl-trace.h`
because it handles the case of `HAVE_TRACING` not being defined and
correctly still declares the functions defined in `cogl-trace.c`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/650
`cogl_util_memmem` was used as a wrapper in case `memmem` wasn't
defined, but since commit 46942c24 these are required. In case of
`memmem`, we didn't explicitly require this in the meson build files, so
add that as well.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/629
These are implemented in the Meta namespace these days, where we have
better abstractions for wayland-related types. They also weren't used
anymore, since we removed the unused ClutterWaylandSurface type in the
previous commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/624
The idea here is to be able to visualize and immediately
understand what is happening. Something like:
```
[ view1 ] [ view2 ]
[---- Layout ---][------ Paint ------][ Pick ]
[================== Update =====================]
```
But with colors. A few of the previous profiling data
sections were removed, since they didn't really add to
reading the graph.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add the ability to add tracing instrumentation to the code. When
enabled, trace entries will generate a file with timing information
that will be processable by sysprof for generating visualization of
traces over time.
While enabled by default at compile time, it is possible to disable the
expansion of the macros completely by passing --disable-tracing to
./configure.
Tracing is so far only actually done if actually enabled on explicitly
specified threads.
This will be used by Mutter passing the write end of a pipe, where the
read end is sent to Sysprof itself via the D-Bus method 'Capture()'.
By passing that, we have to detect EPIPE that is sent when Sysprof stops
recording. Fortunately, we already ignore the signal at meta_init(), so
no need to add a custom signal handler.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add debug flags based on meson's `debug` option instead of `buildtype`.
This allows custom build configurations to behave like a debug or release build.
Add `-fno-omit-frame-pointer` to Mutter/Cogl. Not to Clutter though, as that would
require more changes to how Clutter's gir is created
Remove `-DG_DISABLE_CAST_CHECKS` from Clutter in debug builds
Add `-DG_DISABLE_CHECKS`, `-DG_DISABLE_ASSERT` and `-DG_DISABLE_CAST_CHECKS` to all
non-debug builds but `plain`, which explicitly should not have any compile flags
Use `cc.get_supported_arguments`, so it becomes more obvious to the user which flags
are set during compilation
https://gitlab.gnome.org/GNOME/mutter/merge_requests/497
When free'ing a pipeline we destroy the BigState first and then the fragment and
vertex snippets lists using the big state pointer which is now invalid.
This causes a crash when G_SLICE=always-malloc is set and using MALLOC_CHECK_.
So, invert the operations by free'ing the snippet lists first, and the big state
afterwards.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
XLib renderer saves its data as the object cogl user data, however this data
is free'd as part of the object destruction that happens before free'ing the
renderer in _cogl_renderer_free(), from where we're calling the renderer
disconnect vfunc.
Thus in _cogl_xlib_renderer_disconnect() we happen to get an invalid pointer to
CoglXlibRenderer and we try access to it in order to close the X11 display.
This causes all the cogl tests to crash when G_SLICE=always-malloc is set and
when using MALLOC_CHECK_.
Fix this using the renderer winsys custom data instead of using cogl object data
for storing the CoglXlibRenderer, and handling the destruction of it manually.
As bonus this also makes access to the renderer data faster.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
By providing an (internal) table to map `CoglPixelFormat`s to their
respective properties we will be able to get rid of the unusual enum
values in the future. This is something we will need once we want to
have support for more pixel formats (such as YUV-based formats).
As an extra feature, we provide a `to_string()` method, which is quite
useful for debugging purposes (rather than deciphering enum values).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/524
We're going to add some features and extra code to CoglPixelFormat, so
it's much nicer to have it in once place. Notice also that it doesn't
make sense that e.g. `_cogl_pixel_format_get_bytes_per_pixel()` were in
a private header, since they were being exported anyway.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/524
GList's used in legacy code were free'd using a g_slist_foreach + g_slist_free,
while we can just use g_slist_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
GList's used in legacy code were free'd using a g_list_foreach + g_list_free,
while we can just use g_list_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
Cogl unit tests are just functions inside normal code files that needs to be
dload'ed by the test binary.
So in case unit-tests are enabled, we need to export those symbols.
Since map file can't be overridden, use a configure_file to generate the map
file when tests are enabled, in order to export the needed symbols.
Then goes through the source files to look unit tests checking for their macro
definition and load them with the runner script.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
Use find-conform-unit-tests.sh to create a meson list of tests to run.
This allows to run each test as single test with meson and to remove the timeout
for all the tests.
Instead of changing 'run-tests.sh' to take test-names as arguments we can just
generate simple dummy test-files for each test, without having to change the
tooling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
We already effectively require GLSL, because there's no fixed-function
backend anymore. OpenGL 2.0 drivers don't really exist in the wild, so
just go ahead and require 2.1 or better. 2.1 implies GLSL 1.20 or
better, so simplify that as well.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/489
This is effectively a revert of:
commit 6cfc93f26f
Author: Robert Bragg <robert@linux.intel.com>
Date: Tue Oct 2 11:44:00 2012 +0100
clip-stack: workaround intel gen6 viewport clip bug
It's been over six years, if this bug is still present we should just
fix Mesa already.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/481
If a second `set_{sync,complete}_pending` was queued before the idle
handler had flushed the first then one of them would be forgotten.
It would stay queued forever and never emitted as a notification.
This could happen repeatedly causing a slow leak. But worse still,
`clutter-stage-cogl` would then have `pending_swaps` permanently stuck
above zero preventing the presentation timing logic from being used.
The problem is that a boolean can only count to one, but in some cases
(triple buffering, whether intentional or accidental #334) we need it to
count to two. So just change booleans to integers and count properly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/216
Meson 0.50.0 made passing an absolute path to install_headers()'
subdir keyword a fatal error. This means we have to track both
relative (to includedir) paths for header subdirs and absolute
paths for generated headers now :-(
https://gitlab.gnome.org/GNOME/mutter/merge_requests/492
As it was originally reported on
https://bugzilla.gnome.org/show_bug.cgi?id=779234#c0, the hottest path was
convert_ubyte() in mesa. Reverting this shows no trace of those hot paths,
nor any higher than usual CPU activity.
As the improvements at the time were real, I can only conclude that pixel
conversion was happening somewhere further the pipeline, and swizzling just
helped indirectly. That got eventually fixed, so swizzling just stayed to
cause grief. And lots it caused.
Time to bin this, it seems.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/486
This basically reverts commit 54735dec, which tried to avoid the
GLib-defined types in favor the standard C ones. One exception to this
is the bool type, for which the commit introduces a new type CoglBool.
Let's just get rid of this type in favor of having consistency with the
GLib types. Note by the way that neither CoglBool nor gboolean (which
has a size of `int`) are completely compatible with bool (size `char`).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/321
Until meson 0.50, setting the install parameter in 'configure_file' is ignored
if 'install_dir' is set. Then until mutter doesn't depend on such meson version
cogl_installed_tests_libexecdir should be empty unless have_installed_tests is
false, or this file will be installed anyway.
See https://github.com/mesonbuild/meson/issues/4160
Commit 25f416c13d added additional compilation warnings, including
-Werror=return-type. There are several places where this results
in build failures if `g_assert_not_reached()` is disabled at compile
time and the compiler misses a return value.
https://gitlab.gnome.org/GNOME/mutter/issues/447
pkg-config files for mutter are generated using *_pkg_deps as requires, but
programs linked with libmutter doesn't need most of these private dependencies
which are only needed for building and linking mutter and its subprojects.
So list packages needed only by mutter itself inside *_pkg_private_deps and
don't expose such packages to pkg-config, but only use them at build time.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Soname of the libraries should be the major version number, while the version
triplet is currently used:
objdump -p libmutter-4.so.0.0.0 | grep SONAME
SONAME libmutter-4.so.0.0.0
While is expected to be only libmutter-4.so.0
Fix all shared libraries by setting valid version and soversion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Map files were using wrong syntax (missing final `;` or invalid chars).
Also, the map files were only monitored for rebuilding, but not really used by
ld, so pass the ldflags with version-script so that private symbols are really
hidden.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/395
In plenty of places a non-static function was defined but didn't have
the corresponding declaration. Fix this by adding them, or alternatively
making them static.
cogl-path uses types from glu.h, but to avoid a build dependency on glu,
it kept a minified copy of glu.h in tree. Drop this file and just use
the actual glu.h. To avoid linking to libGLU.so, just use the
includepath, instead of actually adding glu as a real dependency.
This means we can remove an includepath meant to make it possible to
include <GL/glu.h>.
gluTessCallback() expects an equivalent to a GFunc, but we pass
functions with arguments without casting. To get rid of warnings, cast
the callback function pointer to the expected type.
I saw Meson fade from the sky
On the wind I heard a sigh
As snowflakes cover fallen Makefiles
I will say this last goodbye
Meson is now coming
So ends Autotools days
Future is now coming
And we must away
Over Python and without Bashisms
Through lands where never Meson touched
By silver streams that run down to the Sea
Under parsers, beneath old legacy
Over snow one winter’s morn
I turned at last to paths that lead home
And though where the road then takes me
I cannot tell
We came all this way
But now comes the day
To bid you farewell
Many places I have been
Many sorrows I have seen
But I don’t regret
Nor will I forget
All Makefiles that took that road with me
I bid you all a very fond farewell.
If a library is provided in the positional arguments, then meson
defaults to installing the .pc file in a 'pkgconfig' subdirectory
in the library's install location. We want the files in the regular
$libdir/pkgconfig rather than $libdir/mutter-$api/pkgconfig, so
specify the location explicitly in the parameters.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/382
Dependencies are added automatically, and we no longer get warnings
like:
clutter/clutter/meson.build:628: DEPRECATION: Library mutter-clutter-4
was passed to the "libraries" keyword argument of a previous call to
generate() method instead of first positional argument. Adding
mutter-clutter-4 to "Requires" field, but this is a deprecated behaviour
that will change in a future version of Meson. Please report the issue
if this warning cannot be avoided in your case.
While for normal textures, GL_TEXTURE_2D should be used, when it's an external
texture, binding it using GL_TEXTURE_2D results in an error.
Reading the specification for GL_TEXTURE_EXTERNAL_OES it is unclear whether
getting pixel data from a texture is possible, and tests show it doesn't result
in any data, but in case it would eventually start working, at least bind the
correct target for now.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/362
Don't just set the internal format to the dummy format "any", as that causes
code intended to be unreachable code to be reached. It's not possible to
actually know the internal format of an external texture, however, so it might
not actually correspond to the real format.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/362
This makes the build less verbose, as all .gir generation except for
clutters didn't pass --quiet to g-ir-scanner, making it output long
linking commands. Do this by adding a common introspection_args
variable.
While at it, put -U_GNU_SOURCE in there too, as it was always passed
everywhere as without it the scanner would log warnings.
This is the last remaining feature necessary to achieve
parity with the Autotools build.
A few changes were made to the install locations of the
tests, in order to better acomodate them in Meson:
* Tests are now installed under a versioned folder (e.g.
/usr/share/installed-tests/mutter-4)
* The mutter-cogl.test file is now generated from an .in
file, instead of a series of $(echo)s from within Makefile.
Notice that those tests need very controlled environments
to run correctly. Mutter installed tests, for example, will
failed when running under a regular session due to D-Bus
failing to acquire the ScreenCast and/or RemoteScreen names.
When running installed tests, the working directory for Cogl
tests is /usr/libexec/installed-tests/mutter-cogl-4/conform,
which isn't writable by normal users.
To avoid the adding stray hidden files to the current directory,
adapt the runner script to fallback to $(mktemp) - which is
available on all platform we care about - and avoid adding
hidden files everywhere.
Presumably glReadPixels itself can be more performant with pixel format
conversions than doing a fix-up conversion on the CPU afterwards. Hence,
pick required_format based on the destination rather than the source, so
that it has a better chance to avoid the fix-up conversion.
With CoglOnscreen objects, CoglFramebuffer::internal_format (the source
format) is also wrong. It is left to a default value and never set to
reflect the reality. In other words, read-pixels had an arbitrary
intermediate pixel format that was used in glReadPixels and then fix-up
conversion made it work for the destination.
The render buffers (GBM surface) are allocated as DRM_FORMAT_XRGB8888.
If the destination buffer is allocated as the same format, the Cogl
read-pixels first converts with glReadPixels XRGB -> ABGR because of the
above default format, and then the fix-up conversion does ABGR -> XRGB.
This case was observed with DisplayLink outputs, where the native
renderer must use the CPU copy path to fill the "secondary GPU"
framebuffers.
This patch stops using internal_format and uses the desired destination
format instead.
_cogl_framebuffer_gl_read_pixels_into_bitmap() will still use
internal_format to determine alpha premultiplication state and multiply
or un-multiply as needed. Luckily all the formats involved in the
DisplayLink use case are always _PRE and so is the default
internal_format too, so things work in practise.
Furthermore, the GL texture_swizzle extension can never apply to
glReadPixels. Not even with FBOs, as found in this discussion:
https://gitlab.gnome.org/GNOME/mutter/issues/72
Therefore the target_format argument is hardcoded to something that can
never match anything, which will prevent the swizzle from being assumed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/313
This function gets hit even today on relatively modern Intel systems (I
have a Haswell Desktop with Mesa 18.2.4) if the pixel format is right.
Presumably it makes things slower for no longer a reason.
According to cb146dc515, this
functionality was refactored into a workaround path in 2012. The commit
message mentions the problem existing before Mesa 8.0.2. The number
refers to https://bugs.freedesktop.org/show_bug.cgi?id=46631 .
The use case where I hit this is when improving support for DisplayLink
video outputs. These are used through a "secondary GPU", and since
DisplayLink does not have a GPU, Mutter uses the CPU copy path with Cogl
read-pixels[1]. If the DisplayLink framebuffer was allocated as
DRM_FORMAT_XRGB8888 (the only format it currently handles correctly),
mesa_46631_slow_read_pixels_workaround would get hit. The render buffer is
the same format as the framebuffer, yet doing the copy XRGB -> XRGB ends
up being slower than XRGB -> XBGR which makes no sense.
This patch is not sufficient to fix the XRGB -> XRGB copy performance,
but it is required.
This patch reverts CoglGpuInfoDriverBug into what it was before
cb146dc515.
[1] This is not actually true until
https://gitlab.gnome.org/GNOME/mutter/merge_requests/278 is
merged.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/313
The depth buffer is marked as invalid when 1) the framebuffer is just created,
and 2) whenever GL_DEPTH_TEST is enabled on it. This will ensure the
framebuffers attached depth buffer (if any) is properly cleared before it's
actually used, while saving needless clears while depth testing is disabled
(the default).
https://bugzilla.gnome.org/show_bug.cgi?id=782344
Since now we don't set the swap throttled value based
on sync-to-vblank, we can effectively remove it from
Cogl. Throttling swap buffers in Cogl is as much a
historical artifact as sync-to-vblank. Furthermore,
it doesn't make sense to disable it on a compositor,
which is the case with the embedded Cogl.
In addition to that, the winsys vfunc for updating
whenever swap throttling changes could also be removed,
since swap throttling is always enabled now.
Removing it means less code, less branches when running,
and one less config option to deal with.
This also removes the micro-perf test, since it doesn't
make sense for the case where Cogl is embedded into the
compositor.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/191
This commit includes following fixes for a few shell scripts:
1. Follow the best practice of quoting variables everywhere unless they
are used in places where word-splitting and globbing can never happen.
2. Replace `command` with $(command) because the latter is easier to use
and read.
3. Don't use "$@" in places expecting a string because it is an array
of strings instead of a single string.
Bash is not always installed in /bin and we should not hardcode the path
of it in source code which is expected to be built on many operating
systems and distributions.
Since most scripts using #!/bin/bash here doesn't have any bashism,
they can be converted to #!/bin/sh instead of using /usr/bin/env trick.
This macro was introduced so as to be able to be built without GLib.
However, this feature was long ago removed, and in Mutter we depend on
it anyway, so let's get rid of it in favor of more consistency.
This is based on `g_clear_object`, so it will be a bit more consistent
to write (and prevents the headaches from accidentally forgetting a NULL
check).
If texture allocation fails (e.g. on an old GPU with size limit 2048)
then `cogl_texture_new_with_size` was trying to use the same CoglError
twice. The second time was after it had already been freed.
Bug reported and fix provided by Gert van de Kraats.
https://launchpad.net/bugs/1790525
This will allow CoglFramebuffer and its implementations to be exposed
to GJS and other language bindings. This is a necessary part of the
bigger work to make framebuffer management explicit.
CoglOffscreen is effectively a CoglFramebuffer, but it isn't being marked as
such by the GType machinery. This makes it impossible for introspection to
correctly set this class up.
Fix that by adding a COGL_GTYPE_IMPLEMENT_INTERFACE() code into the declaration
of CoglOffscreen. This does not have any functional changes though.
Meson uses the 'dependencies' field to determine and
parallelize build steps, but that isn't entirely true
with 'link_with'; this might cause a race condition
when generating header files while trying to build
them.
Fix that by only using 'dependencies' instead of 'link_with'.
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
Install include files in
$prefix/include/mutter-$apiversion/[clutter,cogl,...,meta]/, and
datafiles in /usr/share/mutter-$apiversion/.... We still would conflict
e.g. given that our gettext name is "mutter", and how keybindings are
installed, but it's a step in the right direction.
There are different unit-tests file generated containing lists of tests
the test-runner.sh should run. Running run-tests.sh read the unit-tests
in the current directory, which is inconvenient to do when using meson.
The docs previously suggested that `cogl_frame_info_get_frame_counter`
returned a timestamp of an unknown clock ID. That's not correct. The
cogl source code shows that it does and must use the same clock as
`cogl_get_clock_time`.
Related to https://gitlab.gnome.org/GNOME/mutter/issues/131
Before we just set it to "none", but this was not enough since various
calls will depend on not just the context being active, but the main
rendering surface.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/21
By the looks of it, commit 95e9fa10ef was taping over an Intel DRI bug
that would make it return post-swizzling pixel data on glReadPixels().
There's been reports over time of that commit resulting in wrong colors
on other drivers, and lately Mesa >17.3 started showing the same symptoms
on Intel.
But texture swizzling works by changing parameters before fragment shaders
and reading pixels from an already drawn FBO/texture doesn't involve those.
This should thus use pixel_format_to_gl_with_target(), which will result in
correctly requesting the same pixel format than the underlying texture,
while still considering it BGRA for the upper layers in the swizzling case.
https://gitlab.gnome.org/GNOME/mutter/issues/72Closes: #72
We just arbitrarily chose the first EGL config matching the passed
attributes, but we then assumed we always got GBM_FORMAT_XRGB8888. That
was not a correct assumption. Instead, make sure we always pick the
format we expect.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/2
On drivers that do not support glGetTexImage2D (i.e. on GLES),
cogl_texture_get_data() has a "feature" that allows it to download
texture data by rendering the texture on an intermediate framebuffer
object and then reading back the data from there. However, this
feature requires the user to have previously set an "active"
framebuffer object in the context, which makes this very tricky
because it is not clear to the developer that he needs to do that
in order for some code to work on GLES (of course it works on
desktop GL, so nobody notices...) and additionally the code actually
crashes if an active fbo is not set!
This patch basically removes this feature in order to prevent
the crash and is in line with how this code has evolved in cogl-2.0:
https://git.gnome.org/browse/cogl/commit/?id=6d6a277b8e9a63a8268046e5258877ba94a1da5bhttps://bugzilla.gnome.org/show_bug.cgi?id=789961
When creating a renderer with a custom winsys (which is always how
mutter uses cogl) make it possible to pass a user data with the winsys.
Still unused.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The GL_BGRA definition is not available for GLES2 contexts, which use
the EXT_texture_format_BGRA8888 instead, causing a build failure when
trying to use it in those contexts.
Fortunately, this hack is only relevant for GL, so let's guard it to
prevent the failure in GLES2, where that extension is used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=786568
Those are cached and reused across runs, which doesn't qualify to mesa
as "static" indeed. Properly marking those as dynamic is more true, and
brings in slight performance benefits just by avoiding the resulting
(and later silenced) mesa warning.
https://bugzilla.gnome.org/show_bug.cgi?id=782344
Fixes cogl_texture_get_data() resorting to the wrong conversions when
extracting the texture data. This notably resulted in RGB/RGBA buffers
copied as-is into BGRA buffers, for instance for the fullscreen animation,
or single-window screenshots of such buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
The ARB_robustness extension defined the following tokens as
returned by GetGraphicsResetStatusARB (see spec at [1]):
GUILTY_CONTEXT_RESET_ARB 0x8253
INNOCENT_CONTEXT_RESET_ARB 0x8254
UNKNOWN_CONTEXT_RESET_ARB 0x8255
These tokens might not be defined in some GL implementations,
such as Mesa 13's implementation of GLES 2.0, so we need to
define them ourselves not to break those builds.
[1] https://www.khronos.org/registry/OpenGL/extensions/ARB/ARB_robustness.txthttps://bugzilla.gnome.org/show_bug.cgi?id=781398
We already do have a texture with an internal format in these paths,
so we should check the required format according to it.
This fixes CoglAtlasTexture (and CoglPangoRenderer indirectly), as
it forces a RGBA format on its texture, but pixel_format_to_gl()
anyway assumed swizzling is performed on the texture, while it is
not the case.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
This is used by the GL driver in order to determine whether swizzling
actually applies given the bitmap and target texture internal format.
If both agree that they store BGRA, then swizzling may apply.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
If the GL implementation/hw supports the GL_*_texture_swizzle extension,
pretend that BGRA textures shall contain RGBA data, and let the flipping
happen when the texture will be used in the rendering pipeline.
This avoids rather expensive format conversions when forcing BGRA buffers
into RGBA textures, which happens rather often with WL_SHM_FORMAT_ARGB8888
buffers (like gtk+ uses) in little-endian machines.
In intel/mesa/wayland, the performance improvement is rather noticeable,
CPU% as seen by top decreases from 45-50% to 25-30% when running
gtk+/tests/scrolling-performance with a cairo renderer.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
Because the threaded-swap-wait functionality requires XInitThreads(),
and because it isn't clear that it is a win for all applications,
add a API function to conditionally enable it.
Fix the cogl-crate example not to just have a hard-coded dependency
on libX11.
https://bugzilla.gnome.org/show_bug.cgi?id=779039
It's a good guess that the buffer swap will occur at the next vblank,
so use glXWaitVideoSync in a separate thread to deliver a sync event
rather than just letting the client block when frame drawing, which
can signficantly change app logic as compared to the INTEL_swap_event
case.
https://bugzilla.gnome.org/show_bug.cgi?id=779039
When we don't have GLX_OML_sync_control, we still can set the
frame presentation time, but we always use the system monotonic time,
so return that from get_clock_time().
https://bugzilla.gnome.org/show_bug.cgi?id=779039
As previously commented in the code, SGI_video_sync is per-display, rather
than per-renderer. The is_direct flag for the renderer was tested before
it was initialized (per-display) and that resulted in SGI_video_sync
never being used.
https://bugzilla.gnome.org/show_bug.cgi?id=779039
In order to minimize the amount of breakage, while at the same time
making it easier to make backward incompatible changes needed to
continue turning libmutter into a capable Wayland compositor, make the
libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel
installable by adding a version number to the name. This changes
various filenames, for example what previously was libmutter.so is now
libmutter-0.so (assuming the version for now is 0), and
libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config
filenames and GObject introspection has been renamed to reflect this as
well.
This enables a downstream compositor rely on a specific version of the
libmutter API, while gracefully handling API/ABI changes by having to
update to the new version at their own pace.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
Different libEGL will do different things for eglGetDisplay since it has
to guess what kind of display it's been handed. Better to just use the
API that makes it explicit.
Signed-off-by: Adam Jackson <ajax@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772422
We need a GLES2 extension macro in cogl-texture-2d-gl.c, but we can't
include GLES2/gl2ext.h because it will conflict with things in
GL/glext.h. We can't rely on cogl including anything for us since it'd
only include GLES2/gl2ext.h if OpenGL support was explicitly disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=774891
EGLDevice requires a define from GLES2, even when GL is used instead.
As type definitions may conflict between the two, we shouldn't include
both at the same time. Instead, provide the missing define explicitly
when not using GLES2.
https://bugzilla.gnome.org/show_bug.cgi?id=774891
Add API to enable the caller to have a custom method for allocating an
external texture. This will enable the possibility for mutter to
generate a texture from for example an EGLStream without having to add
support for that in Cogl.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Don't rely on the Cogl layer having Wayland specific paths by
determining the buffer type and creating the EGLImage ourself, while
using the newly exposed CoglTexture from EGLImage API. This changes the
API used by MetaWaylandSurface to make the MetaWaylandBuffer API be
aware when the buffer is being attached. For SHM and EGL buffers, only
the first time it is attached will result in a new texture being
allocated, but later for EGLStream's, more logic on every attach is
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
The WL_bind_wayland_display spec says that EGL images should be created
using EGL_WAYLAND_BUFFER_WL as the target and a NULL context. Mesa
seems to be lenient and accept any context, however some other stacks
aren't so forgiving and fail if anything apart from EGL_NO_CONTEXT is
used.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
https://bugzilla.gnome.org/show_bug.cgi?id=769731
Mutter (and libmutter users) are the only users of this version of
cogl, and will more or less only use the cogl-1.0, cogl-2.0 and cogl
experimental API variants, and having the possibility of having
different API versions of the same API depending on what file includes
it is error prone and confusing. Lets just remove the possibility of
having different versions of the same API.
https://bugzilla.gnome.org/show_bug.cgi?id=768977
We bypass our build configuration to fetch API from a version which
isn't the one we actually use. Stop bypassing and just admit that the
1.0 API is still there, but still deprecated.
https://bugzilla.gnome.org/show_bug.cgi?id=768977
CoglFrameInfo is a frame info container associated with a single
onscreen framebuffer. The clutter stage will eventually support drawing
a stage frame with multiple onscreen framebuffers, thus needs its own
frame info container.
This patch introduces a new stage signal 'presented' and a accompaning
ClutterFrameInfo and adapts the stage windows and past onscreen frame
callbacks users to use the signal and new info container.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Move the KMS interaction from cogl into mutter, where most of the other
KMS interaction already takes place. This also removes dead code which
were only excercised when non-mutter callers used the cogl KMS backend.
The cogl KMS API was updated to pass via MetaRendererNative instead of
via the different cogl objects.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
In cogl use cogl-config.h and in clutter use clutter-build-config.h. We
can't use clutter-config.h in clutter because its already used and
installed.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
If you include a file that might define __INSIDE_COGL_H__, don't
undefine it if it wasn't defined in that file. This makes it possible
to include for example cogl-gles2.h from some other file which defines
__INSIDE_COGL_H__.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
When using a context with robustness, glGetError() may return
GL_CONTEXT_LOST at any time and this error doesn't get cleared until
the application calls glGetGraphicsResetStatus() . This means that our
error checking can't call glGetError() in a loop without checking for
that return value and returning in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
commit 188752158 changed cogl to stop needlessly creating its own
monitor output configuration when mutter would just soon overwrite
it anyway.
Unfortunately, that commit is causing a crash in some cases because
cogl will now create and later draw to a 0x0 egl surface until mutter
sets the monitor layout.
This commit changes cogl to avoid creating and using a surface, before
it knows how big of a surface to create.
https://bugzilla.gnome.org/show_bug.cgi?id=758073
If we get EACCES from drmPageFlip we're not going to get
a flip event and shouldn't wait for one.
This commit changes the EACCES path to silently ignore the
failed flip request and just clean up the fb.
https://bugzilla.gnome.org/show_bug.cgi?id=756926
ES3 provides glMapBufferRange as core, with the added bonus that it also
supports read mappings. Use this where possible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728355
GLES2 does not support passing READ to glMapBuffer; attempting to call
cogl_buffer_map for read on ES2 will bring it down with an assert. Make
sure COGL_DEBUG=journal doesn't do this when it's not possible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728355
On Wayland deinit() of an onscreen buffer is going to destroy the
associated native window of an EGLSurface. So we should destroy the
EGLSurface as well otherwise we might end up confusing the GL driver.
We also currently guard against setting a EGL_NO_SURFACE as current
EGLSurface, but this shouldn't be a problem if we have a surfaceless
context. So we allow surface destruction under that condition.
https://bugzilla.gnome.org/show_bug.cgi?id=754667
If the user switches VTs in the middle of a page flip, the
page flip operation may fail with EACCES. page flipping will
work next time the VT becomes active, so we shouldn't disable
page flipping in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
If cogl fails to open the drm device, initialize gbm, or open the
egl display, then it closes the drm fd, uninitializes gbm, closes the
display and then calls _cogl_winsys_renderer_disconnect which does
most of those things again, on the, now deinitialized, members.
This commit removes the explicit failure handling in renderer_connect and
defers cleanup to disconnect.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
gbm confusingly has two different format types, and cogl
is using the wrong one in some of its calls to gbm_surface_create
This commit fixes the calls that are wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
glGetIntegerv (GL_DEPTH_BITS, ...) and friends are deprecated in GL3; we
have to use glGetFramebufferAttachmentParameteriv() instead, like we do
for offscreen framebuffers.
Based on a patch by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=753295
We want to be able to retrieve the XVisualInfo used when creating the
GL context under GLX and EGL-X11, so that we can use the visual before
we have an onscreen frame buffer.
Initialize variables; GCC does not always catch all cases where the
variables are used after being initialized, especially when it comes to
out parameters.
Some drivers ( like mgag200 ) don't yet support drmModePageFlip.
This commit forgoes waiting for vblank and flips right away
in those cases. That prevents the hardware from freezing up the screen,
but does mean there will be some visible tearing.
https://bugzilla.gnome.org/show_bug.cgi?id=746042
We can't just destroy and replace the EGL and gbm surfaces while
they are still in use i.e. while there is a pending flip. In fact, in
that case, we were calling gbm_surface_destroy() on a surface that
still had the front buffer locked and then, on the flip handler,
gbm_surface_release_buffer() for a buffer that didn't belong to the
new surface.
Instead, we still allocate new surfaces when requested but they only
replace the old ones on the next swap buffers when we're sure that the
previous flip has been handled and buffers properly released.
Currently the code queries the current msc then tries to approximate the
value of the next msc satisfing the modulus 2 for when to wait. This
introduces some instability as the msc may tick over during the
roundtrip leading to a 32ms wait instead of a 16ms wait. This happens
often enough to cause jerky animations, and affect gnome-shell-perf-tool.
A simpler solution is just use a single roundtrip by using WaitForMsc to
ask the driver to compute the next vblank itself.
Cc: Owen W. Taylor <otaylor@fishsoup.net>
Cc: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Robert Bragg <robert@sixbynine.org>
Add cogl_texture_pixmap_x11_new_left() and
cogl_texture_pixmap_x11_new_right() (which takes the left texture
as an argument) for texture pixmap rendering with stereo content.
The underlying GLXPixmap is created using a stereo visual and shared
between the left and right textures.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
If we want to show quad-buffer stereo with Cogl, we need to pick an
appropriate fbconfig for creating the CoglOnscreen objects. Add
cogl_onscreen_template_set_stereo_enabled() to indicate whether
stereo support is needed.
Add cogl_framebuffer_get_stereo_mode() to see if a framebuffer was
created with stereo support.
Add cogl_framebuffer_get_stereo_mode() to pick whether to draw to
the left, right, or both buffers.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
An application might for whatever reason want to control a specific output
directly and have cogl only swap the other outputs if any. So add an api that
allows setting a crtc to be ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=730536
The surfaceless context extension can be used to bind a context
without a surface. We can use this to avoid creating a dummy surface
when the CoglContext is first created. Otherwise we have to have the
dummy surface so that we can bind it before the first onscreen is
created.
The main awkward part of this patch is that theoretically according to
the GL and GLES spec if you first bind a context without a surface
then the default state for glDrawBuffers is GL_NONE instead of
GL_BACK. In practice Mesa doesn't seem to do this but we need to be
robust against a GL implementation that does. Therefore we track when
the CoglContext is first used with a CoglOnscreen and force the
glDrawBuffers state to be GL_BACK.
There is a further awkward part in that GLES2 doesn't actually have a
glDrawBuffers state but GLES3 does. GLES3 also defaults to GL_NONE in
this case so if GLES3 is available then we have to be sure to set the
state to GL_BACK. As far as I can tell that actually makes GLES3
incompatible with GLES2 because in theory if the application is not
aware of GLES3 then it should be able to assume the draw buffer is
always GL_BACK.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
(cherry picked from commit e5f28f1e75db9bdc4f2688f420a74f908f96cf76)
Conflicts:
cogl/winsys/cogl-winsys-egl-kms.c
cogl/winsys/cogl-winsys-egl-x11.c
Some features that were previously available as an extension in GLES2
are now in core in GLES3 so we should be able to specify that with the
gles_availability mask of COGL_EXT_BEGIN so that GL implementations
advertising GLES3 don't have to additionally advertise the extension
for us to take advantage of it.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
(cherry picked from commit 4d892cd97558da61ba526f947ac0555ebab632d2)
When a new CoglAtlasTexture tries to fit into an existing CoglAtlas
it should make sure the atlas stays valid while it expands.
https://bugzilla.gnome.org/show_bug.cgi?id=728064
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 2eec9758f67e9073371c2edd63379324849373c4)
This can happen when we dpms off the output or when login1 takes away
drm master status from our drm fd. In either case, we need to call
the swap notify handler so that the compositor dosn't get stuck waiting
for that notification. The compositor should stop repainting shortly in
both cases, as it's either going into dpms off mode or vt switching away.
https://bugzilla.gnome.org/show_bug.cgi?id=728979
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This environment variable predates the reliable platform detection in mesa
and typically just causes crashes when the specified platform doesn't
match what's passed in. Aside from being unecessary and problematic
it also leaks into the GNOME session, preventing clients from
automatically detecting the wayland platform.
https://bugzilla.gnome.org/show_bug.cgi?id=728978
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Prevent Cogl function names from being mangled when a C++ compiler is
being used by adding some missing COGL_{BEGIN,END}_DECLS guards.
https://bugzilla.gnome.org/show_bug.cgi?id=728628
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Commit 1b2dd815 (Registers gtypes for all public objects and structs)
introduced GCCism's in its use of varargs, which broke the build of Cogl
on other non-GCC compilers, such as Visual Studio.
Define the COGL_GTYPE_DEFINE_BASE_CLASS and COGL_GTYPE_DEFINE_CLASS macros
using ISO-style varargs so that the build of Cogl can be fixed on non-GCC
compilers.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Remove #pragma directives that causes any applications that use Cogl to
link to the SDL libraries when Cogl was built with the SDL winsys. This is
mainly due to the availability of both SDL-1.x and SDL-2.x support in the
SDL winsys, where different libraries are linked for SDL-1.x and SDL-2.x.
To avoid having to link to the SDL/SDL2 libraries when the application code
is not directly using SDL/SDL2, define SDL_MAIN_HANDLED in the CFLAGS so
that SDL's wrapper main() implementation will not be used when the
application is being built.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit c3035912833eabe1f6dadbea23c78e595aac79dc)
In Lionel's work for supporting introspection better for Cogl, a number of
public symbols were added for Cogl and Cogl-Path, so add these symbols to
cogl.symbols and cogl-path.symbols so that they can be exported, which will
fix the build of the Cogl conformance test and the introspection files
for the Windows-based builds.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This macro is internal to gobject so using it risks breaking Cogl if
glib changes its API. Instead we just use its expansion. Note that
glib provides two expansions for this depending on the glib version
but this only uses the one for older versions.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
This adds much more comprehensive support for gobject-introspection
based bindings by registering all objects as fundamental types that
inherit from CoglObject, and all structs as boxed types.
Co-Author: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Remove the symbols that are now in cogl-path (where cogl-path.symbols
already include), and add the symbols that were added to the Cogl API.
Also add internal symbols as required by cogl-path and cogl-pango.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The DriverCallback is a function that is defined by the Windows SDK 8.0+
headers, which was initially used for device driver development. The use
of DriverCallback would cause a clash, causing things to break when built
with newer Windows SDKs, so rename DriverCallback to CoglDriverCallback to
avoid this problem.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
To help facilitate integration with third party frameworks this exposes
the EGL context and display to applications as well as the GLX context.
(Note that the GLX display is already available via
cogl_xlib_renderer_get_display())
This adds a new top-level <cogl/cogl-glx.h> header that needs to be
included explicitly to access the glx specific api.
Anyone using these apis will be responsible for checking that Cogl
is indeed using EGL or GLX by calling cogl_renderer_get_winsys_id()
This will enable GStreamer, for example, to be able to create a GL
context that shares resources with Cogl's context.
https://bugzilla.gnome.org/show_bug.cgi?id=724992
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This splits out the GLeglImageOES define in cogl-egl.h into a private
cogl-egl-private.h header and updates the guards in cogl-egl.h to be
consistent with other top-level headers where we need to be careful
about how __COGL_H_INSIDE__ is defined and undefined, esp when the
gobject introspection scanner is running.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This ensures we use EGLNativeWindowType and EGLNativeDisplayType
everywhere instead. The previous names come from EGL 1.2 but it seems
reasonable to require more recent EGL versions. If someone wanted to add
compatibility for EGL 1.2 later it would be straightforward to define
the new names to the old.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
SDL2 supports selecting between full OpenGL or OpenGL ES 1/2 but our
selection code was written before SDL 2.0 was officially released and
since then a new SDL_GL_CONTEXT_PROFILE_MASK attribute was added and
we have to explicitly set the SDL_GL_CONTEXT_MINOR_VERSION attribute.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a new COGL_FEATURE_ID_BUFFER_AGE feature id that can be used
to determine if cogl_onscreen_get_buffer_age() will ever return an age
other than 0. This should be used instead of querying the winsys feature
via cogl_clutter_winsys_has_feature().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We have an #ifdef EGL_WL_bind_wayland_display guard in
cogl-winsys-egl-feature-functions.h to avoid referencing wayland types
when the EGL header doesn't know about them, but somehow this guard also
ended up around the KHR_create_context and EXT_buffer age features too
even though they aren't wayland specific.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This winsys feature flag is exposed via the deprecated
cogl_clutter_winsys_has_feature function and Clutter is curently
relying on it. Previously the EGL winsys was only setting the internal
COGL_EGL_WINSYS_FEATURE_BUFFER_AGE flag and there was no mapping to
the public flag. Therefore the feature would only be used on GLX. This
patch just adds the mapping.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8418e98b2b1b25515a961ad1bb9f0c4770d6eb1d)
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7bc7ea4cb5e8134a3aeed9615477f4152b558509)
Conflicts:
cogl/winsys/cogl-winsys-egl-kms.c
Instead of spinning forever, do a roundtrip, which guarantees that the
global messages have been sent by the time we read the sync message.
If the proper globals aren't initialized yet, error out immediately. This
does mean that users can't use CoglOnscreen with foreign custom surface
types without xdg_shell, but when a use case comes for this, we'll
investigate then...
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit af9057d35f331e2c9509958fb40627917c477b80)
Since the Cogl 1.18 branch is actively maintained in parallel with the
master branch; this is a counter part to commit 1b83ef938fc16b which
re-licensed the master branch to use the MIT license.
This re-licensing is a follow up to the proposal that was sent to the
Cogl mailing list:
http://lists.freedesktop.org/archives/cogl/2013-December/001465.html
Note: there was a copyright assignment policy in place for Clutter (and
therefore Cogl which was part of Clutter at the time) until the 11th of
June 2010 and so we only checked the details after that point (commit
0bbf50f905)
For each file, authors were identified via this Git command:
$ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD
We received blanket approvals for re-licensing all Red Hat and Collabora
contributions which reduced how many people needed to be contacted
individually:
- http://lists.freedesktop.org/archives/cogl/2013-December/001470.html
- http://lists.freedesktop.org/archives/cogl/2014-January/001536.html
Individual approval requests were sent to all the other identified authors
who all confirmed the re-license on the Cogl mailinglist:
http://lists.freedesktop.org/archives/cogl/2014-January
As well as updating the copyright header in all sources files, the
COPYING file has been updated to reflect the license change and also
document the other licenses used in Cogl such as the SGI Free Software
License B, version 2.0 and the 3-clause BSD license.
This patch was not simply cherry-picked from master; but the same
methodology was used to check the source files.
Not doing so leads to the following error, if stddef.h is not included
indirectly through EGL headers:
| libdrm/drm.h:132:2: error: unknown type name 'size_t'
| size_t name_len; /**< Length of name buffer */
Signed-off-by: Andreas Oberritter <obi@saftware.de>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 55c82476a93366a3e7d1a2537fccc3a7aab87c66)
The _cogl_egl_texture_2d_new_from_image function has a CoglError
argument which implies that it is unlike the other texture
constructors and returns errors immediately rather than having a
delayed-allocation mechanism. cogl_wayland_texture_2d_new_from_buffer
which calls it is also like this. We can't rely on delayed-allocation
semantics for this without changing the applications because the
texture needs to be allocated before the corresponding EGLImage is
destroyed. This patch just makes it immediately allocate.
A better patch might be to remove the error argument to make it
obvious that there are delayed-allocation semantics and then fix all
of the applications.
This was breaking Cogland and Mutter.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 0206c03d54823b2f6cbb2aa420d07a4db9bcd8a3)
The previous implementation was dereferencing the sample pointer in
order to get the offset to subtract from the member pointer. The
resulting value is then only used to get a pointer to the member in
order to calculate the offset so it doesn't actually read from the
memory location and shouldn't cause any problems. However this is
probably technically invalid and could have undefined behaviour. It
looks like clang takes advantage of this undefined behaviour and
doesn't actually offset the pointer. It also generates a warning when
it does this.
This patch splits the _cogl_container_of macro into two
implementations. Previously the macro was always used in the list
iterator macros like this:
SomeType *sample = _cogl_container_of(list_node, sample, link)
Instead of doing that there is now a new macro called
_cogl_list_set_iterator which explicitly assigns to the sample pointer
with an initial value before assigning to it again with the real
offset. This redundant initialisation gets optimised out by compiler.
The second macro is still called _cogl_container_of but instead of
taking a sample pointer it just directly takes the type name. That way
it can use the standard offsetof macro.
https://bugzilla.gnome.org/show_bug.cgi?id=723530
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 1efed1e0a2bce706eb4901979ed4e717bb13e4e2)
The declaration of INTEL_swap_event was treating winsys features as
if they were a bitfield, but they aren't. The end result was that
instead of reporting two features when INTEL_swap_event is present,
we report none.
https://bugzilla.gnome.org/show_bug.cgi?id=719741
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Since 248a76f5eac7e5ae4fb45208577f9a55360812a7 cogl.h can no longer be
included in internal source files so the WGL winsys was no longer
compiling.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 91af97a2a27ab5ad3e7eaabebd03503b685d4d42)
