* clutter/clutter-event.h:
Removed unused POINTER_ENTER and POINTER_LEAVE states. (#546)
* clutter/clutter-stage.c: (clutter_stage_fullscreen),
(clutter_stage_unfullscreen):
Only Change fullscreen prop if the backend implements fullscreen
methods. (#545)
Merge from stable
* clutter/eglnative/clutter-event-egl.c:
Flag every device click after the first as motion events
instead of button presses. (#505, Shreyas Srinivasan)
Apply a patch from Neil Roberts (bug 488) for fixing the drawing of the
rectangle border, by not overdrawing the rectangle on the border and by
doing the correct check on the border colour.
* clutter/clutter-main.c: (_clutter_do_pick):
Call glFinish before reading pixels
* clutter/eglx/clutter-stage-egl.c: (clutter_stage_egl_realize):
Add missing read surface in making context current.
Above fixes via Kate Alhola.
* clutter/glx/clutter-glx.h:
Add missing filter funcs so there actually exported
* clutter/clutter-actor.c:
* clutter/clutter-event.h:
* clutter/clutter-main.c:
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-backend-glx.h:
* clutter/glx/clutter-event-glx.c:
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-stage-glx.h:
Add initial support for stage state events.
Fix fullscreening for an already mapped stage.
* tests/test-events.c:
Print out info from the above. Blue button now toggles
fullscreen.
* clutter/clutter-effect.c:
* clutter/clutter-effect.h:
Add a setting for templates to ref or clone underlying
timelines. (As to improve sync issues like those in foofone)
* tests/test-timeline.c:
Also add completed signals.
* clutter/cogl/gles/cogl.c: (cogl_texture_image_2d):
* configure.ac:
Forward port from stable branch. RGB Image fixes gles
and check for lower case libgles_cm.
The GLib main loop allows destroying sources while still in the dispatcher
function, so whether the Clutter threading lock is being held or not is
actually unpredictable by the library. This might be fixed in GLib, so we
just do what GTK+ does for the time being and wait.
See bug: http://bugzilla.gnome.org/show_bug.cgi?id=459555
When we are in the the event translation function sometimes we need to
synthesise events: the double and triple click events are synthetic events
placed on the queue after a sequence of events has been received, for
instance.
Until now, the events were placed on the queue after the translation from
the native events was successful. This led to a loss of ordering because
we put the synthesised event on the queue before the last event that
triggered it.
This patch puts the events on the queue before translating them, with a
"pending" flag set; if the translation sequence is completed then the flag
is removed - otherwise the event is removed from the queue altogether. The
queue manipulation functions have been modified to ignore the "pending"
flag when looking for events.
This patch also adds a private structure overlayed on the ClutterEvent
struct so that we can extend the events with private data without exposing
it in the public API.
* clutter/Makefile.am:
* clutter/clutter-enum-types.h.in:
* clutter/clutter-enum-types.c.in: Use template files for
glib-mkenums; this makes the Makefile template a bit more
clean and the enum types generation more customisable (e.g.
when GLib 2.14 has been released, we can use g_once_init_enter()
and g_once_init_leave() to have thread-safe GType functions
for the enum types as well).
Emit the ClutterTimeline::new-frame signal only if we arrive there with an
active timeout source. Also, make sure to take a reference on the timeout
when emitting signals.
If the timeline is advancing of zero frames, bump it up to one frame. (bug
471, Rob Bradford)
If the user called clutter_timeline_pause() while in the ::new-frame handler
the timeout is removed and the timeline is reset, while the correct behaviour
should be to simply return. (#371, Johan Bilien)
If we skipped the last frames and we ended up over the frame number, emit
the ::new-frame signal with the last frame before emitting the ::completed
signal.
Remove the call to clutter_timeline_stop() when reaching the end of the
timeline: it was used just to remove the timeout source and it emitted the
::paused signal, which doesn't make any sense. Also rewind the timeline
after emitting the ::completed signal, so that calling get_current_frame()
in the ::completed signal handlers still work.
The ownership of the ClutterAlpha object is transferred to the ClutterBehaviour
used by the effect; we just need to unref the behaviour to make the alpha
object disappear.
The clutter_timeout_pool_insert_sorted() function caused an inversion of
the timeout sources in the pool; this led to a wrong behaviour in the
execution of the timeout functions. See bug 471.
This patch drops clutter_timeout_pool_insert_sorted() in favour of the
standard g_list_insert_sorted(), which produces identical behaviours with
and without the pool.
A new test, written by Rob Bradford, has been added to the regression test
suite in order to identify sorting issues with the timeout pools.
Apply a patch from Neil Roberts (bug 468) that makes the get_center() method
of ClutterBehaviourRotate return the correct tuple of coordinates.
Also, fix some coding style issues and make sure to freeze and thaw the
GObject notification queue when emitting the notify signal on multiple
properties in one method.
Some of the API landed in trunk has been backported to the stable branch
after testing. This patch updates the Since: tag in the API reference to
reflect the time when the API was first added to a release.
When computing the increasing smoothstep alpha value use the right type
for the results, to avoid overflowing the [0, 0xffff] range of the alpha
value.
Also use the right format when printing out the opacity and alpha values
in the opacity behaviour.
Language bindings will have problems with raise() and lower() bein in both
ClutterContainer and ClutterActor; hence, this patch renames
clutter_container_raise() and clutter_container_lower() to
clutter_container_raise_child() and clutter_container_lower_child(),
respectively.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-event.c:
* clutter/clutter-event.h:
* clutter/clutter-main.c:
* clutter/clutter-main.h:
* clutter/clutter-private.h:
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/clutter-types.h:
Initial implementation of actors emmitting event signals (423);
- Actors set_reactive() to receive mouse events.
(call clutter_enable_motion_events() for per action motion events)
- clutter_stage_set_key_focus () to direct key events.
- Events bubble up to parents (ending at stage)
(original source identified by clutter_event_get_source())
TODO:
- enter/leave notifys for actors.
- stage specific events - fullscreen
- grabs
* tests/test-events.c:
Extend a little to use new API
* clutter/cogl/gl/cogl.c:
* clutter/glx/clutter-backend-glx.c:
Move get_proc_address into cogl and out of backend.
(shaders will need it)
* clutter/clutter-group.c: (clutter_group_real_lower):
Fix a minor compile warning.
* TODO:
Sync up.
Every direct reference to ClutterGroup has been removed, in favour of
ClutterContainer - which is the official way of creating container
actors as of 0.4.
Since ClutterActor directly calls ClutterGroup methods we need ClutterContainer
to provide them, so that every container actor behaves the same way.
This patch makes ::raise, ::lower and ::sort_depth_order virtual functions
of the ClutterContainer interface, implemented by ClutterGroup.
The documentation has been added and deprecation warnings have been added
as well.
ClutterStage now uses the newly added clutter_container_find_child_by_id()
function to find the right child in the scenegraph, using the picking id.
This fixes the test-boxes test case.
Finding a child by its ID is a method that should be used by every container
and not only by ClutterGroup. This is needed to actually fix the picking in
ClutterStage.
* clutter/clutter-timeout-pool.c: Fix removing and adding timeouts
to the timeout pool during a dispatch of a timeout source already
inside the pool. (#456, based on a patch by Neil Roberts)
(clutter_timeout_dispatch), (clutter_timeout_pool_dispatch): Hold
the main Clutter lock in the pool dispatch function, instead of
the per-timeout dispatch; this guarantees that the ref+unref of
the single timeouts are done under the main lock.
Ported from 0.4 branch.
* clutter/clutter-texture.c:
Fix typo in clutter_texture_get_pixbuf (#458, #442?, Neil Roberts).
Use take_object when getting pixbuf prop to avoid ref leak
The threads_enter() and threads_leave() functions are no-ops because Clutter
is not thread-aware nor thread-safe. Leaving them in is a source of confusion
so we just remove them.
Update the NEWS and the README files with the release notes.
To avoid using a ClutterPadding each time you add an actor to a ClutterBox
when you want the same padding around each child, you can now set the
default padding. The API is pixel-based, since it's a commodity function,
and will affect only clutter_box_pack_defaults().
ClutterBox is meant to work like the HTML boxing model: it has a margin and
a backgrdound color, and every child actor is added with a pack type and a
padding. The ClutterBoxChild structure holds the child actor, the padding,
the packing type and the allocated coordinates for the actor.
* clutter/clutter-behaviour-depth.c:
Modify to work like all other behvaiours in not forcing
increasing order in behaviour 'limits'. (#436)
Rename limit min/max props to start/end.
* tests/test-depth.c:
Simplify test-case to work with above change and
without multiple ramps
* clutter/clutter-behaviour-rotate.c:
Handle CW rotation when end > start and similar for CCW just
like ellipse behaviour.
* clutter/clutter-behaviour-depth.c: Clarify that what drives
the movement along the Z axis is the ClutterAlpha object (we
don't have the luxury of a rollover like the opacity does);
so, if you want to go from 0 to -100 you have to use a
decreasing function, just as well if you want to go from 100
to 0. Using a min-depth of 100 and a max-depth of 0 and an
increasing function is undefined behaviour.
* tests/Makefile.am:
* tests/test-depth.c: Add a test case for the depth behaviour.
* clutter/clutter-behaviour-ellipse.c:
(clutter_behaviour_ellipse_get_angle_tilt): Avoid recursion
by fixing a typo.
(clutter_behaviour_ellipse_get_angle_begin),
(clutter_behaviour_ellipse_get_angle_end): Correct the angles
here too.
2007-08-03 Emmanuele Bassi <ebassi@openedhand.com>
* clutter/eglnative/clutter-backend-egl.c:
* clutter/eglx/clutter-backend-egl.c:
* clutter/sdl/clutter-backend-sdl.c: Set the default resolution
as 96.0 dpi for every backend (we already were under this
assumption anyway, and this makes it easier to change this
setting per-backend).
* clutter/pango/pangoclutter-fontmap.c:
* clutter/pango/pangoclutter.h: Allow setting the resolution
for the PangoClutterFontMap object and provide the implementation
for the PangoFcFontMap::get_resolution() virtual function. This
allows to set the resolution of the PangoContext when retrieving
it.
* clutter/clutter-label.c (clutter_label_init): Set the
resolution of the font map with the one the backend gives us.
* clutter/clutter-entry.c (clutter_entry_init): Ditto.
* clutter/clutter-stage.[ch]: Fix clutter_stage_set_user_resizable()
name, and add a getter for the property.
* clutter/glx/clutter-stage-glx.c: Use the accessor, not
g_object_get() to retrieve the value of the resizable property.
* clutter/clutter-backend.[ch]: Add clutter_backend_set_resolution()
and clutter_backend_get_resolution(); backends should use the former
to set the resolution of the display when initialising, while actors
should use the latter when sizing themselves depending on the
resolution or the font size.
* clutter/glx/clutter-backend-glx.c: Set the resolution as 96 dpi
as a default and query the X server when opening the display.
* clutter/clutter-entry.c: Drop the hardcoded dpi value and use
clutter_backend_get_resolution() to compute the default size.
* clutter/clutter-types.h: Document ClutterGravity enumeration
and remove the only incomplete symbol of the api reference. Now
we are up to 79% documented symbols.
* clutter/clutter-media.c: Document ClutterMedia signals;
replace the implementation of clutter_media_set_filename() with
something a wee bit more robust (and portable) than a sprintf().
* clutter/clutter-actor.[ch]: Use GInitiallyUnowned
as the parent structure in the ClutterActor structure
definition; somehow, this has escaped everyone attention
in one year and a half. Luckily, GInitiallyUnowned is
as big as GObject.
(clutter_actor_get_abs_position_units),
(clutter_actor_get_abs_position): Check parameters.
* clutter/clutter-texture.h: Unmangle the flags enum
type declaration, so that dumb parsers like h2defs.py
are not fooled.
* clutter/clutter-behaviour-ellipse.[ch]:
* clutter/clutter-effect.c: Fix some documentation
issues and make gtk-doc happy.
* clutter/clutter-feature.h:
Add new stage feature flags and document.
* clutter/eglnative/clutter-backend-egl.c:
* clutter/eglx/clutter-backend-egl.c:
* clutter/sdl/clutter-backend-sdl.c:
Set new feature flags.
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-stage-glx.c:
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
Add a 'user_resizeable' setting to the backend and implement
for glx backend.
* clutter/clutter-entry.c: (offset_to_bytes),
(clutter_entry_ensure_cursor_position),
(clutter_entry_new_with_text), (clutter_entry_new),
(clutter_entry_insert_unichar), (clutter_entry_delete_chars):
Fixed utf8 support so it actually works now, for both inserting and deleting
chars.
Fixed positioning of cursor for utf8 chars. Both GString and Pnago need
bytes (not documented!) for string manipulation, so making sure all values
were bytes and not char positions fixed the issue.
Set a default size of 50x50 for the entry, otherwise no chars can be seen
if the size is not set after creation (which confuses the developer).
Most of these fixes are simple symbol shadowing issues, like index and the
braindead y0 and y1 extern symbols exported by math.h on GNU libc systems.
There is a masking issue in ClutterTexture which should be checked; I ran
the tests and everything looked fine.
The rest are just unused variables.
* clutter/clutter-behaviour.h:
* clutter/clutter-behaviour.c: Rename clutter_behaviour_clear()
to clutter_behaviour_remove_all() to avoid method clashes in
bindings.
* clutter/clutter-behaviour-bspline.c: Kill off some deep pointer
indirections; use CLUTTER_NOTE() instead of ifdeffed out g_debug();
add checks in every public entry point; move some initialisations
of private data structures out of the constructor and into the
init function, where they belong.
* clutter/clutter-behaviour-rotate.c:
* clutter/clutter-behaviour-rotate.h:
Split 'center' prop into 3 seperate props for each axis.
Use clutter_behaviour_actors_foreach() rather than
clutter_behaviour_get_actors() to avoid copying list.
Call fixed point rotation funcs internally.
* clutter/clutter-effect.c:
* clutter/clutter-effect.h:
Add new simple rotation based effect funcs.
* clutter/eglx/clutter-backend-egl.c:
* clutter/eglnative/clutter-backend-egl.c:
* clutter/sdl/clutter-backend-sdl.c: Destroy the stage in every
backend.
* clutter/clutter-texture.[ch]: Add a ClutterTextureError
to be returned by the loader functions; use the GObject API
to allocate the private data structure instead of managing it
ourselves; add documentation.
* clutter/clutter-media.c: (clutter_media_base_init):
Remove #if 0! signal - assume causing issues with binding generation.
(#407)
* clutter/cogl/gl/cogl.c:
Check GL_TEXTURE_RECTANGLE_ARB and GL_MAX_RECTANGLE_TEXTURE_SIZE_ARB
are defined in gl.h (#404)
* clutter/clutter-texture.c: (texture_render_to_gl_quad),
(clutter_texture_paint):
Dont be over aggressive in throwing criticals for unrealized
textures. Doesn't make sense for sub classes. (#403)
Two small fixes for correctly debugging the deinitialisation
phase of the backend:
* clutter/glx/clutter-backend-glx.c: Remove the event source
after we unref the main stage.
* clutter/glx/clutter-stage-glx.c: Add a mark at the end of the
unrealize call (the perl bindings seem to crash before we reach
this point).
* clutter/clutter-behaviour-ellipse.c: Remove pointer indirections;
add sanity checks on the public entry points; make all the public
properties floating point (where needed) andconvert them to fixed
point internally. (Partial fix for #389)
* clutter/clutter-behaviour.[ch]: Rename ClutterBehaviour::apply
and ClutterBehaviour::remove to ClutterBehaviour::applied and
ClutterBehaviour::removed respectively, and emit them when the
behaviour has been applied (or does no longer apply) to an actor.
(clutter_behaviour_dispose), (clutter_behaviour_finalize),
(clutter_behaviour_class_init): Move the actor removal to the
::dispose virtual function, and remove the ::finalize one;
document the missing properties and signals.
(clutter_behaviour_clear): Add function to clear a behaviour:
every actor will be unreffed and the ClutterBehaviour::removed
signal will be emitted.
* clutter/clutter-event.c:
Correct clutter_event_get_state () return type. Fixes#398
* clutter/glx/clutter-stage-glx.c:
Disable use XFixes cursor visibility funcs. Appears to have issues
on feisty X Server at least. Fallback should work generally better.
Fix non offscreen clutter_stage_snapshot to also rotate read pixel
data to correct orientation.
To follow the other simple behaviours, the ClutterBehaviourDepth:min-depth
and ClutterBehaviourDepth:max-depth properties have been renamed to
ClutterBehaviourDepth:depth-start and ClutterBehaviourDepth:depth-end
respectively.
* TODO:
Updates.
* clutter/clutter-stage.c:
* clutter/glx/clutter-stage-glx.c:
Fix cursor visibility property.
Force a repaint before mapping to attempt to avoid flicker.
Always make sure that the opacity is a positive integer, even if the
start and end opacities are inverted.
Also, use the correct integer-to-pointer casts, as the opacity is an
unsigned integer.
* clutter/Makefile.am:
* clutter/eglnative/Makefile.am:
* clutter/eglnative/clutter-backend-egl.c:
* clutter/eglnative/clutter-backend-egl.h:
* clutter/eglnative/clutter-egl.h:
* clutter/eglnative/clutter-event-egl.c:
* clutter/eglnative/clutter-stage-egl.c:
* clutter/eglnative/clutter-stage-egl.h:
* clutter/eglx/Makefile.am:
* clutter/eglx/clutter-backend-egl.c:
* clutter/eglx/clutter-egl.h:
* clutter/eglx/clutter-event-egl.c:
* clutter/eglx/clutter-stage-egl.c:
* configure.ac:
Add a new 'native' EGL backend for non X based EGL's
(i.e on framebuffer).
Rename old backend to 'eglx' and namespace public funcs with this.
* clutter/pango/pangoclutter-private.h:
Add extra checks for expected defines.
* clutter/clutter-box.c: (clutter_box_pick):
Call clutter_box_paint rather than actor paint method avoiding
infinte loop (Fixes test-boxes crasher).
* clutter/glx/clutter-stage-glx.c: (clutter_stage_glx_unrealize):
Trap the X calls to avoid potential X errors.
This patch adds a command line switch to make every X call synchronous.
It's only useful for debugging purposes, so it will not be displayed when
calling a Clutter application with --help.
* clutter/clutter-main.c (clutter_redraw): Move the stage
paint init call from the main redraw function...
* clutter/clutter-stage.c (clutter_stage_paint): ... to the
ClutterActor::paint() overridden method in ClutterStage.
* clutter/clutter.h:
* clutter/Makefile.am: ClutterBackend is marked as public API,
so install the clutter-backend.h header and include it when
including clutter.h.
* clutter/clutter-entry.[ch]: Various fixes to ClutterEntry:
fix code style issues; add documentation for the various
properties; add ClutterEntry:entry-padding property, for controlling
the text padding (until we have style properties separated from
the object properties); notify property changes; free resources
in the ::finalize method; rename clutter_entry_add() to
clutter_entry_insert_unichar(), and clutter_entry_remove() to
clutter_entry_delete_chars() - for bindings and for matching the
insert_text() and delete_text() existing methods; add a getter
method for the max-length property.
Make ClutterEffectTemplate use a pointer to the private data to avoid
a type check each time it dereferences the ClutterEffectTemplatePrivate
structure pointer.
Clean up the header file for parsing purposes.
Add a description for the gtk-doc reference.
* clutter/clutter-entry.c: (clutter_entry_handle_key_event),
(clutter_entry_add), (clutter_entry_remove):
Check if unichar == 0, and if so, return, as it will cause a delete in
the GString.
* clutter/clutter-texture.c: (texture_upload_data):
Fix a SEGV for GL ES textures.
* clutter/cogl/gles/cogl.c: (cogl_setup_viewport):
Tweak default z_camera for 60 degrees like GL.
* clutter/egl/clutter-backend-egl.c::
* clutter/egl/clutter-stage-egl.c:
Fix edpy usage (thanks to Kaj Gronholm).
* NEWS:
* README.in:
* TODO:
Update for 0.3 release.
* clutter/clutter-actor.c:
Minor doc fixups
* clutter/clutter-texture.c:
Various minor additions for handling non RGBA data.
Fix a typo breaking clutter_texture_get_pixbuf() on tiled textures.
* tests/test-actors.c:
Disable scaling to avoid drifting (temporary till API is fixed)
All the ClutterTimeline share a ClutterTimeoutPool by default. This might
cause problems if an application is using a heavily threaded library that
does not play nicely with the main loop (like libneon). If this is the
case, using the CLUTTER_TIMELINE environment variable set to "no-pool"
makes the ClutterTimeline objects discard the pool and allocate a slice
of the main loop.
* TODO:
Sync up a little.
* clutter/clutter-main.c:
Set a default window title based on g_prgname().
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/egl/clutter-stage-egl.c:
* clutter/glx/clutter-stage-glx.c:
* clutter/sdl/clutter-stage-sdl.c:
Alter draw_to_pixbuf to return a pixbuf
* configure.ac:
Only full in gdk-pixbuf-xlib as a GLX backend dep.
* tests/test-entry.c:
Fix a couple of warnings.
* clutter/sdl/clutter-event-sdl.c:
Seemingly fix SDL Event source.
Add some very basic SDL keysym translation.
(Thanks to Thomas Van Machelen for initial translation code)
* tests/test-events.c:
Dump some info on keysyms pressed.
* clutter/clutter-actor.h:
* clutter/clutter-stage.h: Add 32 padding slots; when we
reach 1.0 it'll be a long road until the following ABI
break.
* tests/test-behave.c: Don't forget to include headers.
* clutter/clutter-container.h:
* clutter/clutter-layout.h: Interfaces are not checked
at compile-time, so there's not need to add padding to
avoid ABI breaks.
* clutter/clutter-actor.c:
Fix typo in x rotation transform (Thanks to Johan Billen #138)
* configure.ac:
* doc/manual/Makefile.am:
Fix manual build and required program check.
* tests/Makefile.am:
Another typo fix.
The mutex protection for the timeout pool was causing deadlocks, so it has been
removed for the time being, until I figure out a way to make it work properly.
A timeout pool should not be considered thread-safe (or thread-aware) until further
notice.
* clutter/clutter-box.[ch]: Base class for layout containers.
* clutter/clutter-hbox.[ch]: Horizontal box actor.
* clutter/clutter-vbox.[ch]: Vertical box actor.
* clutter/clutter.h:
* clutter/Makefile.am: Build glue
* tests/Makefile.am:
* tests/test-boxes.c: Test suite for ClutterBox API and
implementations.
* clutter/cogl/gl/cogl.c: (cogl_check_extension):
Actually populate this func and remove the static alternate
named one. Means GLX actually checks for available extensions.
Other minor tidy ups.
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-backend-glx.h:
Add support for GLX_SGI_swap_control to do vblanking prefering
over glXGetVideoSyncSGI. Should fix issues on Intel chips with
very slow frame rates due to vblank problems.
Thanks to Michel Danzer for tips, see;
http://bugs.freedesktop.org/show_bug.cgi?id=10542
* test/test-actors.c:
Change FPS to 60.
* clutter/clutter-timeout-pool.c: Make ClutterTimeoutPool
more thread-safe, using a static lock.
(clutter_timeout_pool_dispatch), (clutter_timeout_pool_remove): Fix
a race condition-turned-in-memory corruption bug, triggered by
removing a timeout from the pool while still spinning the pool
source.
Use a per-class timeout pool into ClutterTimeline so that every timeline
instance will use a pooled timeout function to execute the tick. This
should make multiple timelines not starve the main loop.
A ClutterTimeoutPool is a source for the GLib main loop which pools
multiple timeout functions. The pool is always sorted so that the first
timeout to expire is also the first element of the pool; hence, extraction
is a constant time operation. This also makes the usage of multiple
timeouts at the same priority not compete for a timeslice of the main
loop, leading to starvation.
* clutter/clutter-container.[ch]: Add a generic actor container
interface, for actors to implement without subclassing ClutterGroup.
* clutter/clutter-group.[ch]: Make ClutterGroup implement the
ClutterContainer interface, and deprecate the colliding methods.
* clutter/clutter-layout.[ch]: Add extended layout interface.
Actors and containers requiring or honouring complex layout
management should implement this interface and provide at least
one of the available layout types: width for height, height for
width, natural size, iterative size request.
* clutter/clutter-label.c: A ClutterLabel requires height for
width layout management, so it implements the ClutterLayout
interface.
* clutter/Makefile.am: Add new files to the build.
* tests/*.c:
* examples/*.c: Update tests and examples code to use the
new ClutterContainer API instead of ClutterGroup.
This patch adds a "delay" property to the timeline object. If set,
it will delay the start of the timeline of a number of milliseconds.
If the timeline is looping, the delay will be applied just the first
time and not for every loop.
* clutter/clutter-entry.c: (clutter_entry_set_property),
(clutter_entry_get_property), (clutter_entry_class_init),
(clutter_entry_init), (clutter_entry_set_text),
(clutter_entry_set_max_length):
* clutter/clutter-entry.h:
* examples/test-entry.c: (main):
Added a max-length property whihc limits the length of the text in the
entry.
boundries.
Text will move within the clip region to keep the cursor always
visible.
Added some padding to the left and right to make sure cursor is
always show.
* clutter/clutter-behaviour-ellipse.c:
Remove uneeded knot signal
* clutter/clutter-behaviour-path.c:
Fix so knot signal is emitted only when a knot is reached.
* clutter/clutter-effect.c:
* clutter/clutter-effect.h:
Add a scale effect.
* configure.ac:
* doc/manual/Makefile.am:
* doc/manual/clutter-manual.xml.in:
* doc/manual/manual.xsl:
* doc/manual/style.css:
Add various bits for application developers manual.
* clutter/clutter-stage.c: (clutter_stage_get_actor_at_pos):
Fix for GL/ES. Barring texture reads this means all clutter
functionality now works on GL/ES! (no doubt with a few yet to
be discovered bugs)
* clutter/clutter-backend.c:
* clutter/clutter-backend.h:
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-backend-glx.c:
Fix up rendering pipeline removing clutter_backend_XXX_stage_paint
and adding clutter_backend_XXX_redraw instead. Duplicates less
code in backends, avoids clutter_actor_paint() getting called
before stage is set up (viewport wise) and unbreaks things like
picking.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/clutter-stage.c: (clutter_stage_get_actor_at_pos):
Redo picking functionality a different way (via color indexing)
as to provide more flexibility, possibly speed and more likely
work with GL/ES (doesn't currently however - not sure why).
* clutter/clutter-group.c:
Add groups own 'pick' method.
* clutter/cogl/cogl.h:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/cogl.c:
Move clipping funtionality into cogl.
* clutter/cogl/gles/cogl-defines.h:
Hack around missing BGR format in GL/ES.
* clutter/egl/clutter-backend-egl.c:
* clutter/egl/clutter-backend-egl.h:
* clutter/egl/clutter-stage-egl.c:
* clutter/sdl/clutter-backend-sdl.c:
* clutter/sdl/clutter-backend-sdl.h:
* clutter/sdl/clutter-event-sdl.c:
* clutter/sdl/clutter-stage-sdl.c:
Update backends to newer API.
Add basic mouse event translation to SDL.
* clutter/clutter-color.c: (clutter_color_parse):
Handle #rrggbbaa color setting strings (i.e with alpha).
Set alpha to 0xff if it is not specified.
* clutter/clutter-stage.c: (clutter_stage_get_actor_at_pos)
Increase select buffer.
* examples/super-oh.c:
Fix up use of clutter_group_show_all()
Use clutter_base_init() instead of g_type_init(), as it calls the type
function for ClutterActor and allows the compiler to use a constant value
instead of the computed result.
Add a semi-private function, called clutter_base_init(), which initialises
the basic Clutter functionalities (at the moment, just the GLib type system)
without calling in the backend-specific code. This function is only useful
for gtk-doc, to introspect the library when generating documentation for
signals, properties and class hierarchy.
Also, change the documentation build system to use clutter_base_init() when
launching the scanner program.
* clutter/clutter-backend.c:
* clutter/clutter-backend.h:
* clutter/clutter-event.c:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-backend-glx.h:
* clutter/glx/clutter-event-glx.c:
Rejig backend event code as to simplify a little.
NOTE: This breaks non glx backends.
* tests/Makefile.am:
* tests/test-events.c:
Add a very simple event test.
* tests/test-textures.c: (main):
Add some more sizes to the test.
* clutter/clutter-texture.c:
Fix typos with new cogl using texture code. Fixes tiled textures.
Add a check for max npots size.
* configure.ac:
* Makefile.am:
* tests/Makefile.am:
* tests/test-textures.c:
Add a simple texture test.
* clutter/Makefile.am:
* clutter/clutter-stage.c:
* clutter/sdl/Makefile.am:
* clutter/sdl/clutter-backend-sdl.c:
* clutter/sdl/clutter-backend-sdl.h:
* clutter/sdl/clutter-event-sdl.c:
* clutter/sdl/clutter-sdl.h:
* clutter/sdl/clutter-stage-sdl.c:
* clutter/sdl/clutter-stage-sdl.h:
* configure.ac:
Add a basic SDL based backend. Lacks real input event handling
(translation) as yet.
Also allows for clutter to be built against dgles.
* clutter/clutter-actor.c:
* clutter/cogl/gles/cogl.c:
Fix rotation + other fixed point cleanups.
* clutter/clutter-texture.h:
Sketch out an updated API.
* clutter/clutter-rectangle.c:
Comment out color match check for now as appears to be causing
borders to always get pained.
* clutter/clutter-texture.h:
Add some format defines (unused as yet)
* clutter/cogl/gles/cogl.c:
* clutter/egl/clutter-stage-egl.c:
* configure.ac:
Various OpenGL ES backend related fixes and tweaks.
* clutter/Makefile.am:
* clutter/clutter-debug.h:
* clutter/clutter-fixed.h:
* clutter/clutter-main.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-defines.h:
* clutter/cogl/gles/cogl.c:
* clutter/egl/clutter-backend-egl.c:
* clutter/egl/clutter-backend-egl.h:
* clutter/egl/clutter-stage-egl.c:
* configure.ac:
Populate most stubs for cogl GL/ES implementation.
(against vincent - see http://svn.o-hand.com/repos/misc/ogles)
Add various fixups to EGL backend.
Code builds and runs (on 16bpp) but yet displays much (is close!)
* clutter/pango/pangoclutter-render.c:
comment out some rouge glBegin/end calls.
* clutter/Makefile.am:
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c:
* clutter/cogl/cogl.h:
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl-defines.h:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-defines.h:
* clutter/cogl/gles/cogl.c:
* clutter/glx/Makefile.am:
* clutter/glx/clutter-stage-glx.c:
* clutter/pango/Makefile.am:
* clutter/pango/pangoclutter-render.c:
* configure.ac:
Add initial 'cogl' implementation. 'cogl' is a simple abstration
layer over GL and GL/ES used by clutter internally. It should
eventually allow clutter applications to be run on both GL and GL/ES
with just a recompile as well as provide more debugging and potentially
profiling information for GL and GL/ES usage.
This commit contains the initial GL implementation.
Merge from clutter.git/master
* clutter/glx/clutter-event-glx.c:
* clutter/glx/clutter-stage-glx.c: Implement the _NET_WM_PING
protocol handling on the main stage window.
* clutter/clutter-stage.h:
* clutter/clutter-stage.c:
* clutter/clutter-main.c: Handle CLUTTER_DELETE events internally,
by calling clutter_main_quit(), and remove the ::delete-event
signal from ClutterStage; clean up the signal emission sequence
for the events: emit the ::event signal before emitting any signal
and the ::event-after signal after the signal has been emitted; move
the signal emission calls inside ClutterStage so we can call
g_signal_emit() instead of g_signal_emit_by_name(), thus sparing us
a lookup for each event.
* examples/test.c: Remove ::delete-event signal handling.
Use the right marshaller signature (boolean:boxed) for the delete-event
signal handlers. Add a debug note in clutter_main_do_event() to track the
signal return. Test the delete-event handler inside test.c.
Supporting WM_PROTOCOLS allows handling the WM_DELETE_WINDOW ClientMessage,
which is then relayed to the ClutterStage actor in form of the "delete-event"
signal. Returning TRUE will block the propagation and won't close the
stage window.
Add clutter_backend_get_n_screens(), which returns the number of screens
manager by the ClutterBackend, and change clutter_backend_get_screen_number()
to return the screen number of the currently used screen; this is semantically
equivalent to clutter_glx_get_default_screen(), but leaves the door open for
a "screen" abstraction in Clutter, handled by the backend. Update the GLX
and EGL backends to retrieve and set the screen_num and n_screens members of
ClutterBackend using Xlib calls.
Add functions to retrieve some of the properties of the screen used by
the backend, like its dimensions (also physical, in millimeters); the
number of screens. Also add setters and getters for the double click
time (in milliseconds) and distance.
Add the XEMBED protocol support in the GLX backend, for embedding the
stage window into another X window. This allows cross-toolkit inclusion
and makes clutter-gtk possible.
Revert to copying GdkPixbuf areas to correctly implement the texture
tiling. This fixes segmentation faults occurring with cards with a
small texture memory area.
Call g_object_freeze_notify() (and take a reference on the actor) inside
clutter_actor_request_size() so that the notifications get unqueued at the
end of the size request.
Add the XEMBED protocol support in the GLX backend, for embedding the
stage window into another X window. This allows cross-toolkit inclusion
and makes clutter-gtk possible.
Revert to copying GdkPixbuf areas to correctly implement the texture
tiling. This fixes segmentation faults occurring with cards with a
small texture memory area.
Call g_object_freeze_notify() (and take a reference on the actor) inside
clutter_actor_request_size() so that the notifications get unqueued at the
end of the size request.
Add initial implementation of a rotate behaviour; this behaviour rotates
actors along a chosen axis, with a chosen direction, between two angles.
Missing: API documentation and the implementation for the angle boundaries
setters (double and fixed API).
* clutter/cogl/Makefile.am:
* clutter/cogl/cogl.h:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl.c:
Begin poplulating cogl GLES code.
* configure.ac:
* clutter/egl/clutter-event-egl.c:
* clutter/egl/clutter-stage-egl.c:
* clutter/egl/clutter-stage-egl.h:
* clutter/egl/clutter-backend-egl.c:
* clutter/egl/clutter-backend-egl.h:
* clutter/egl/clutter-egl.h:
Add initial EGL/X backend work mostly ported from backend branch.
Builds but untested as yet.
* clutter/glx/clutter-stage-glx.c:
Only include XFixes Header if we have have it.
* clutter/clutter-behaviour.c: (clutter_behaviour_apply):
* clutter/clutter-behaviour.h:
Add clutter_behaviour_is_applied()
GL and not GLX. Removed the get_actor_at_pos() and flush() vfuncs
from ClutterStageClass: clutter_stage_flush() becomes the private
_clutter_stage_sync_viewport() function, which should only be used
internally.
* clutter/clutter-backend.c: Clear the event queue when
disposing the backend object; remove the initialisation
of the backend structure members...
* clutter/glx/clutter-backend-glx.c: ... and keep it here
in the backends where it belongs.
* clutter/clutter-private.h:
* clutter/clutter-backend.h: Move the backend functions
into the private header.
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-event-glx.c:
* clutter/clutter-main.c:
* clutter/clutter-stage.c: Update the calls to the private
backend functions.
* clutter/clutter-backend.[ch]: Add an ::init_features
vfunc to ClutterBackend.
Assorted build fixes to pass distcheck.
* clutter/glx/Makefile.am: Install the clutter-glx.h header.
* clutter/Makefile.am: Actually apply linker flags.
* configure.ac: Use a more readable CLUTTER_API_VERSION instead
of CLUTTER_MAJORMINOR; require gobject-2.0 with glib-2.0 >= 2.10,
as we are using GObject and the slice allocator from glib 2.10.
* clutter.pc.in: Add the apiversion variable.
* clutter/clutter-event.c: Pop and peek the event queue
from the tail - it's a queue, not a stack.
* clutter/clutter-private.h:
* clutter/clutter-main.c: Add a boolean signal accumulator.
* clutter/clutter-stage.[ch]: Add an event argument to
the 'delete-event' signal; rename the 'input-event' signal
to 'event'; add the static scope flag to all the stage
events.
* clutter/clutter-private.h: Remove inclusion of backend-specific
headers; update the main context object; add the declarations for
the event queue functions.
* clutter/clutter-backend.[ch]: Add the abstract ClutterBackend
object, which holds backend-specific settings, the main stage,
and the event queue. Every backend must implement a subclass of
ClutterBackend and ClutterStage.
* clutter/clutter-feature.c: Protect the GLX specific calls
behing #ifdef HAVE_CLUTTER_GLX.
* clutter/clutter-actor.c:
* clutter/clutter-group.c:
* clutter/clutter-clone-texture.c: Include GL/gl.h
* clutter/clutter-event.[ch]: Update public API and implement the
event queue private API; hold a reference on the event objects;
move out the keysym-to-unicode table; add the new event types.
* clutter/clutter-color.h: Include clutter-fixed.h
* clutter/clutter-main.c: Update API; get the main stage
from the backend object; process the event received from the
queue; lock/unlock the main mutex if we have one; move the
initialisation process sooner in the init sequence, in order to
have the backend object when we check for options; call the
backed vfuncs in the pre/post parse hooks.
* clutter/clutter-stage.c: Make ClutterStage and abstract class,
implemented by the backends.
* clutter/clutter/glx/clutter-glx.h:
* clutter/clutter/glx/clutter-backend-glx.[ch]:
* clutter/clutter/glx/clutter-event-glx.c:
* clutter/clutter/glx/clutter-stage-glx.[ch]:
* clutter/clutter/glx/Makefile.am: Add the GLX backend.
* clutter/clutter/egl/clutter-backend-egl.[ch]:
* clutter/clutter/egl/clutter-event-egl.c:
* clutter/clutter/egl/clutter-stage-egl.[ch]:
* clutter/clutter/egl/Makefile.am: Add the stub for a EGL backend.
* examples/*.c: Update for the new API.
* clutter/clutter-label.c:
Simple doc fix.
* clutter/clutter-texture.c: (clutter_texture_get_pixbuf):
Backport of fix to get_pixbuf on non alpha textures from 0_2 branch.
Allow the ClutterGroup subclasses to override the add and
remove operations.
* clutter/clutter-group.c: Move the add and remove code from
clutter_group_add() and clutter_group_remove() to the signal
class closures; make the "add" and "remove" signals as
RUN_FIRST.
* clutter/clutter-group.h: Add public functions
clutter_group_get_n_children() and clutter_group_get_nth_child().
* clutter/clutter-behaviour.h:
* clutter/clutter-behaviour.c: Fix header alignment; fix argument
name for apidoc.
* clutter/clutter-fixed.h: Remove some inline documentation to
make the header more readable.
* clutter/clutter-behaviour.c: The actors are store inside a
GSList and not in a GList, so change the list operations to
use the right API.
* clutter/clutter-feature.c: Use clutter_vblank_method() to
get the VBlank method name from the environment variable OR
the command line switch.
(clutter_feature_do_init): Move the check on the features
state here, to avoid an expensive function call, and inline
the function.
* clutter/clutter-fixed.c: Fix gtk-doc.
* clutter/clutter-main.c: Add a --clutter-vblank command line
switch controlling the VBlank method to be used: it overrides
the CLUTTER_VBLANK environment variable.
(pre_parse_hook), (clutter_init),
(clutter_init_with_args): Move thread initialisation before
type init, to avoid the warning that comes with newer GLib
versions.
* clutter/clutter-group.h:
* clutter/clutter-group.c: Mark clutter_group_show_all() and
clutter_group_hide_all() as deprecated.
* clutter/clutter-actor.c: (clutter_actor_allocate_coords):
Fix an amazingly not noticed until now typo.
Minor doc tweaks.
* clutter/clutter-behaviour-opacity.c:
(clutter_behaviour_alpha_notify):
Take into account initial opacity value when calculating from alpha.
* clutter/clutter-group.c:
Add new get_nth_child() and get_n_children() api calls.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
Add new set_width/height API calls.
Tweak scaling by reseting matrix.
Make set_opactiy() take parent opacity into account.
Fix clipping.
* clutter/clutter-alpha.c:
Add more sine functionality.
* clutter/clutter-behaviour-opacity.c:
Dont make a copy of all applied actors but use a foreach()
* clutter/clutter-behaviour-scale.c:
Give correct limits to propertys.
Tweak gravity a little more.
Update docs.
:
* clutter/clutter-behaviour.c: (clutter_behaviour_remove):
Minor warning text change.
* clutter/clutter-feature.c: (clutter_feature_wait_for_vblank):
Minor dri ioctl tweak.
* clutter/clutter-label.c:
* clutter/clutter-label.h:
Add new label_full api call.
* clutter/clutter-label.c: Remove some gtk-isms; always take
a reference before calling g_object_notify(), as the object
might get disposed while calling the closures inside the
notify queue; notify the changes of the ellipsize property.
* clutter/clutter-color.h:
* clutter/clutter-color.c: Expose clutter_color_copy()
and clutter_color_free() for the python bindings, so that
they can manager the conversion automatically; use the
slice allocator when copying/freeing a ClutterColor.
Rework part of the show/hide machinery. Allow groups sub-classes
and composite actors to override show_all/hide_all in order to
decide which children they wish to show/hide. This means that
if an actor overrides the default show/hide virtual methods, it'll
have to chain up to the parent class show/hide. While we're at it,
provide the fully recursive clutter_actor_show_all() and
clutter_actor_hide_all() methods.
* clutter/clutter-behaviour-path.c: Add apidoc for the ClutterKnot
functions; add pathological equality case for clutter_knot_equal().
* clutter/clutter-event.h:
* clutter/clutter-feature.h:
* clutter/clutter-behaviour.c:
* clutter/clutter-behaviour-scale.c:Fix parameters name so that
gtk-doc doesn't complain.
* clutter/clutter-actor.c:
* clutter/clutter-event.c: Add apidoc
* clutter/clutter-actor.h:
* clutter/clutter-actor.c: Add a clutter_actor_show_all() and a
clutter_actor_hide_all() functions; provide a mechanism for
groups and composited actors to programmatically select what to
show/hide when clutter_actor_show_all() and clutter_actor_hide_all()
are called. If you are overriding the ClutterActor::show or
the ClutterActor::hide virtual methods you should chain up with
the parent class.
* clutter/clutter-group.c: Override show_all and hide_all and
recursively show/hide every child inside the group;
clutter_group_show_all() and clutter_group_hide_all() remain as non
recursive versions of clutter_actor_show_all() and
clutter_actor_hide_all() (maybe we should rename them in order
to avoid name clashes with the bindings).
* clutter/clutter-stage.c:
* clutter/clutter-texture.c: Chain up with parent class show
and hide vfuncs.
* clutter/clutter-clone-texture.h:
* clutter/clutter-clone-texture.c: Provide API for changing the
parent texture of a clone texture actor.
* examples/behave.c:
* examples/super-oh.c:
* examples/test.c: Use clutter_actor_show_all() instead of
clutter_group_show_all().
* clutter/clutter-behaviour.h: Add a function prototype
for the foreach function: we need something more specific
than GFunc; add clutter_behaviour_get_actors(), used to
get a list of the actors.
* clutter/clutter-behaviour.c: Add debugging notes; add
a warning for behaviour implementations missing the
alpha_notify vfunc; add api documentation
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-path.c:
* clutter/clutter-behaviour-scale.c: Reimplement the
alpha_notify functions using the new foreach function
and, where possible, by directly iterating on the
actors: this shaves off the number of recalculations
of the property/alpha values, and the number of
functions.
* clutter/clutter-color.h:
* clutter/clutter-color.c: Add clutter_color_parse(),
which parses a string containing a color definition as
understood by XParseColor() (or pango_color_parse()).
Avoid clutter segfaulting when used without invoking
clutter_init(). This is needed when using api documentation
tools and every other tool relying on the GObject
introspection API (esp. on a headless box). see the
note in clutter/clutter-feature.c:clutter_feature_init
for a full explanation.
* clutter/clutter-feature.c: Call clutter_feature_init()
when needed by one of the accessors of the features
structure.
* clutter/clutter-main.c:
* clutter/clutter-private.h: Remove clutter_feature_init()
public declaration: the features support check is done the
first time a feature is needed.
* clutter/clutter-main.c: Do not ever access the clutter
main context pointer directly; instead, obtain a pointer
to it via clutter_context_get_default(), which will always
return something valid.
* clutter/clutter-private.h: Add our own READABLE,
WRITABLE and READWRITE paramspec flags, declaring the
string components of the properties GParamSpec as static;
this should shave off some bytes in the memory footprint
and avoid relocations.
* clutter/clutter-actor.c:
* clutter/clutter-behaviour.c:
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-path.c:
* clutter/clutter-behavuour-scale.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c:
* clutter/clutter-timeline.c: Use the CLUTTER_PARAM_*
macros we just added.
* clutter/clutter-behaviour-scale.c: Add properties for
the scale begin, scale end and gravity parameters.
* clutter/clutter-behaviour-path.h: Mark the ClutterKnot
memory management functions as public (for the bindings),
since we use the slice allocator for copying knots around;
add a clutter_knot_equal() function.
* clutter/clutter-behaviour-path.c:
(node_distance): Use clutter_knot_equal() as a fast path
to avoid the sqrt() in case the nodes we are using are
at the same position.
(path_total_length): Additional check on the existence
of the next node.
* examples/behave.c: Do not leak the ClutterBehaviour
objects around.
* clutter/clutter-texture.h: Clean up.
* clutter/clutter-texture.c: Typo fix in the name
of ClutterTextureTileDimension.
* clutter/clutter-behaviour.c: Allow passing NULL
to clutter_behaviour_set_alpha() (as we pass NULL
in the finalize process).
* clutter/clutter-stage.h:
* clutter/clutter-stage.c:
(clutter_stage_swap_buffers): Remove, as the same is done
via clutter_redraw() and clutter_actor_queue_redraw().
(clutter_stage_unrealize), (clutter_stage_init),
(clutter_stage_set_xwindow_foreign): Do not call
XDestroyWindow() on the stage Window if we are using a
foreign Window, as we don't control its lifetime.
* Makefile.am: Remove the gtk directory from the SUBDIRS.
* clutter/clutter-stage.h:
* clutter/clutter-stage.c: Add clutter_stage_swap_buffers(),
which swaps the GL buffers. This fixes the redraw in the
GTK widget.
* clutter/clutter-actor.c:
* clutter/clutter-alpha.c:
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-scale.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-feature.c:
* clutter/clutter-label.c:
* clutter/clutter-main.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c
* clutter/clutter-timeline.c:
* clutter/clutter-debug.h:
Make CLUTTER_NOTE() just take a string rather than a func.
Add more default context to output.
* configure.ac:
Fix flag and add more help docs for --ebable-debug option.
* configure.ac: Enable debug messages also when
--enable-debug is set to "minimum".
* clutter/Makefile.am:
* clutter/clutter-debug.h: Move all debugging macros inside
this private header; make all debug macros depend on the
CLUTTER_ENABLE_DEBUG compile time define, controlled by
the --enable-debug configure switch; add G_LOG_DOMAIN define.
* clutter/clutter-main.c: Clean up the debug stuff; add
command line argument parsing using GOption; the debug
messages now are triggered like this:
CLUTTER_DEBUG=section:section:... clutter-app
or like this:
clutter-app --clutter-debug=section:section:...
where "section" is one of the sections listed in clutter-main.c,
or "all", for all sections; each section is bound to a flag,
which can be used to define a domain when adding a debug note
using the CLUTTER_NOTE() macro; the old CLUTTER_DBG() macro is
just a wrapper around that, under the CLUTTER_DEBUG_MISC domain;
CLUTTER_NOTE() is used like this:
CLUTTER_NOTE (DOMAIN, log-function);
where log function is g_printerr(), g_message(), g_warning(),
g_critical() or directly g_log() - for instance:
CLUTTER_NOTE (PANGO, g_warning ("Cache miss: %d", glyph));
will print the warning only if the "pango" flag has been
set to the CLUTTER_DEBUG envvar or passed to the --clutter-debug
command line argument.
similar to CLUTTER_SHOW_FPS, there's also the --clutter-show-fps
command line switch; also, the --display and --screen command
line switches have been added: the first overrides the DISPLAY
envvar and the second controls the X screen used by Clutter to
get the root window on the display.
* clutter/clutter-main.h:
* clutter/clutter-main.c: Add extended support for GOption
in Clutter; use clutter_init_with_args() to let Clutter
parse your own command line arguments; use instead
clutter_get_option_group() to get the GOptionGroup used by
Clutter if you want to do the parsing yourself with
g_option_context_parse(). The init sequence has been verified,
updated and moved into common functions where possible.
* clutter/pango/pangoclutter-render.c:
* clutter/*.c: Include "clutter-debug.h" where needed; use
CLUTTER_NOTE() instead of CLUTTER_DBG().
* examples/super-oh.c: Use the new clutter_init_with_args()
function, and add a --num-hands command line switch to
the SuperOH example code controlling the number of hands at
runtime.
* clutter/clutter-rectangle.h:
* clutter/clutter-rectangle.c: Add border to the ClutterRectangle
actor; add "border-width", "border-color" and "has-border"
properties, plus their accessors. The border generation code is
pretty lame, at the moment.
* examples/behave.c: Add code to test the new rectangle properties.
* clutter/Makefile.am:
* clutter/clutter.h:
* clutter/clutter-version.h.in: Auto-generated versioning macros.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c: Add a ClutterActor::parent-set signal,
for notificating changes of an actor's parent; add api-doc for
the actor's properties; add the ClutterActor "name" property; clean
up a bit some functions; emit the "parent-set" signal when setting
te parent and when unparenting; better warnings when lowering
and raising an actor.
* configure.ac:
* clutter/Makefile.am: Add a --enable-debug configure option,
with three levels of debugging: no, minimum and yes; default
for development releases (odd minor version) is "yes"; update
the version m4 defines; update the libtool macros: now just
changed the clutter_interface_age when releasing will update
everything else.
* clutter/clutter-behaviour-path.h:
* clutter/clutter-behaviour-path.c: Add "since" strings; add
a "knot" property which can be used to append a knot to the path;
fix apidoc.
* clutter/clutter-alpha.c: Add "since" strings.
* clutter/clutter-feature.c: Add apidoc.
* clutter/clutter-behaviour-opacity.c: Add the "opacity-start"
and "opacity-end" properties; rewrite constructor to use them.
* clutter/clutter-behaviour-path.h:
* clutter/clutter-behaviour-path.c: Add a "knot-reached" signal,
which is emitted when the path reaches a node in the nodes list;
flesh out the documentation a bit; sync the parameters names
so that gtk-doc doesn't complain about missing stuff.
* clutter/clutter-behaviour.h:
* clutter/clutter-behaviour.c: Add the alpha value to the
ClutterBehaviour::alpha_notify vfunc, so you don't have to
get the value from the alpha inside the behaviour implementations;
add more documentation.
* clutter/clutter-alpha.c: Flesh out the description.
* clutter/clutter-actor.h: Update the header.
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-scale.c: Update docs.
* clutter/clutter-private.h:
* clutter/clutter-actor.c: Implement the defined
clutter_actor_reparent() method; call unrealize
when unparenting an actor.
* clutter/clutter-alpha.h:
* clutter/clutter-alpha.c: Add a data parameter to
the ClutterAlphaFunc; add a data+destroy parameter
to clutter_alpha_set_func() and to clutter_alpha_new(),
and turned the latter into clutter_alpha_new_full();
add a simple, empty constructor clutter_alpha_new().
These changes makes writing bindings a tad more easy,
as bindings require passing their own functions in
order to call the real alpha function.
* clutter/clutter-behaviour.h: Clean up the header.
* clutter/clutter-behaviours.[ch]:
* clutter/clutter-behaviour-opacity.[ch]:
* clutter/clutter-behaviour-path.[ch]:
* clutter/clutter-behaviour-scale.[ch]: Split the
ClutterBehaviourPath, ClutterBehaviourOpacity and
ClutterBehaviourScale into their own files as they
have been growing a bit. Fix ClutterBehaviourPath
API.
* clutter/clutter-media.h: Remove the commented
"metadata_available" signal: gtk-doc chokes up on that.
* clutter/clutter-timeline.h:
* clutter/clutter-timeline.c: Remove the useless
ClutterTimelineAlphaFunc signature; add missing accessor
methods for the properties; clean up a bit.
* clutter/clutter-util.h:
* clutter/clutter-util.c: Remove unneeded function
clutter_util_can_create_texture().
* clutter/clutter-feature.h: Sync the name of
clutter_feature_get_all() with the name declared
in clutter-feature.h.
* clutter/Makefile.am:
* clutter/clutter.h: Update.
* examples/behave.c: Update to the new ClutterAlpha
constructor.
* examples/super-oh.c: Use the right pointer and avoid
the compiler making a fuss about it.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
Add new API clutter_actor_move_by(), clutter_actor_get_size()
* clutter/clutter-alpha.c:
* clutter/clutter-alpha.h:
Add clutter alpha sine func
* clutter/clutter-behaviours.h:
* clutter/clutter-behaviours.c:
Add a basic scale behaviour (needs work)
* examples/behave.c: (main):
More playing with new behaviour functionality
* clutter/clutter-feature.c:
* clutter/clutter-feature.h:
* clutter/clutter-main.c:
Add new experimental sync to vblank code
Set env CLUTTER_VBLANK=none to disable.
* clutter/clutter-alpha.h:
* clutter/clutter-alpha.c: ClutterAlpha is an initially
floating object, as it makes sense only when bound to
a ClutterBehaviour; add checks for public API.
* clutter/clutter-behaviour.h:
* clutter/clutter-behaviour.c: Remove the ClutterBehaviour
constructor: ClutterBehaviour is an abstract class which
must be implemented by subclassing; add checks for public
API; unref the actors on finalize; sink the ClutterAlpha
object.
* clutter/clutter-behaviours.h: ClutterKnot is a boxed
type: add the _get_type() function declaration and the
type macro.
* clutter/clutter-actor.c: (clutter_actor_paint):
* clutter/clutter-clone-texture.c: (clutter_clone_texture_paint):
* clutter/clutter-group.c: (clutter_group_paint):
* clutter/clutter-rectangle.c: (clutter_rectangle_paint):
* clutter/clutter-texture.c: (clutter_texture_paint):
Fix for #156.
clutter_actor_paint() now translates to actor position as
to not fix scaled groups positioning. Sub classes now paint
at 0,0.
* clutter/clutter-actor.c: (redraw_update_idle),
(clutter_actor_queue_redraw):
* clutter/clutter-main.c: (clutter_redraw):
Remove now uneeded locks
( new gst and texture code makes redundant )
* clutter/clutter-texture.c:
* clutter/clutter-texture.h:
Redo clutter texture as to not keep a reference
to underlying texture.
More fixes from Bastien Nocera (#155):
* clutter/clutter-main.c: (clutter_init):
* clutter/clutter-main.h:
Add an enum for clutter init to return an error code.
* configure.ac:
Dont check for XInitThreads, there is no need, its part of xlib.
* clutter/clutter-fixed.h:
Add basic fixed point utility defines and type.
* clutter/Makefile.am:
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-group.c:
* clutter/clutter-stage.c:
* examples/super-oh.c: (main):
Add scale API and functionality.
Rework group sizing. Now group size requests have no effect
but can be scaled.
* clutter/clutter-feature.c: No need to call clutter_feature_init()
each time: it's private and should never be seen from the outside;
add a warning, just in case something screws up and calls it more
than once.
* clutter/clutter-private.h: Move clutter_feature_init()
declaration here: you shouldn't even need to initialise
features yourself.
* clutter/clutter-feature.c: call clutter_feature_init()
each time you try to access the feature list; add a static
lock around the feature flags container; add api documentation.
* clutter/clutter-feature.h: Add a type for the feature flags
to make bindings happy.
* clutter/Makefile.am:
* clutter/clutter-feature.c:
* clutter/clutter-feature.h:
Add new funcs for checking for available runtime GL
extensions.
* clutter/clutter-clone-texture.c:
* clutter/clutter-texture.c:
Add support for non power of two textures
if GL_TEXTURE_RECTANGLE_ARB extension available ( at runtime ).
Should lower texture memory needs a little.
* clutter/clutter-main.c:
(clutter_main): Destroy the main stage, instead of unreffing it.
(clutter_init): Ref and sink the main stage, as it is a top
level actor.
* clutter/clutter-stage.c (clutter_stage_unrealize): Access
the Window private member directly, instead of calling the
get_xwindow method.
* examples/test.c (main): Quit on button press.
* configure.ac: Mark this as 0.1.1, and change the version info
of the library.
* clutter/clutter-actor.c:
* clutter/clutter-group.c: Fix documentation.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_class_init), (clutter_actor_set_property),
(clutter_actor_get_property): Add the "clip" and "has-clip"
properties.
(clutter_actor_set_clip), (clutter_actor_remove_clip): Emit
the notification for the changed properties.
(clutter_actor_has_clip): Simple accessor to the "has-clip"
property.
Big rework of the actor management semantics: now ClutterActor
objects behave like GtkObjects - that is they have an initial
"floating" reference that gets "sunk" when they are added to
a ClutterGroup. This makes a group responsible of de-allocating
each actor inside it, so you just have to destroy the group to
get every child actor destroyed. Also, now you can do:
clutter_group_add (group, clutter_video_texture_new ());
without having to care about reference counting and explicit
unreffing.
* clutter/clutter-private.h: Add private flags setter and
getter macros.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c: Clean up; inherit from GInitiallyUnowned;
add a "visible" property; add the "destroy", "show" and "hide"
signals to ClutterActorClass.
(clutter_actor_show), (clutter_actor_hide): Refactor a bit; emit
the "show" and "hide" signals.
(clutter_actor_set_property), (clutter_actor_get_property),
(clutter_actor_class_init): Implement the "visible" property; add
signals.
(clutter_actor_finalize): Do not leak the actor's name, if it is
set.
(clutter_actor_dispose): Emit the "destroy" signal here.
(clutter_actor_init): Sink the initial floating flag if needed.
(clutter_actor_destroy): Add a function to explicitely destroy
a ClutterActor.
(clutter_actor_set_parent), (clutter_actor_get_parent),
(clutter_actor_unparent): Make set_parent require a valid parent;
add unparent; check on get_parent; ref_sink the actor when
setting its parent and unref it when unsetting it. Probably we'll
need a function that does reparenting as unparent+set_parent in
a single shot.
* clutter/clutter-group.h:
* clutter/clutter-group.c (clutter_group_dispose),
(clutter_group_finalize), (clutter_group_add),
(clutter_group_remove): Make the group destroy its children when
disposing it; clean up, and use the newly-available
clutter_actor_unparent().
* clutter/clutter-stage.h:
* clutter/clutter-stage.c (clutter_stage_init): ClutterStage is
a top-level actor; clean up.
* clutter/clutter-video-texture.h:
* clutter/clutter-video-texture.c: Clean up.
* examples/super-oh.c:
* examples/test.c:
* examples/video-player.c:
* examples/test-text.c:
* examples/video-cube.c: Remove the g_object_unref() call, as the
ClutterStage object is destroyed on clutter_main_quit().
