The function will be used in copying from a primary GPU framebuffer to a
secondary GPU framebuffer using the primary GPU specifically when the
secondary GPU is not render-capable.
To allow falling back in case glBlitFramebuffer cannot be used, add boolean
return value, and GError argument for debugging purposes.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Depends on "cogl: Replace ANGLE with GLES3 and NV framebuffer_blit"
Allow blitting between onscreen and offscreen framebuffers by doing the y-flip
as necessary. This was not possible with ANGLE, but now with ANGLE gone,
glBlitFramebuffer supports flipping the copied image.
This will be useful in follow-up work to copy from onscreen primary GPU
framebuffer to an offscreen secondary GPU framebuffer.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Depends on: "cogl: Replace ANGLE with GLES3 and NV framebuffer_blit"
As a possible ANGLE implementation is not longer limiting the pixel format
matching, lift the requirement of having the same pixel format.
We still cannot do a premult <-> non-premult conversion during a blit, so guard
against that.
This will be useful in follow-up work to copy from onscreen primary GPU
framebuffer to an offscreen secondary GPU framebuffer if the formats do not
match exactly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
ANGLE extensions are only provided by Google's Almost Native Graphics Layer
Engine (ANGLE) implementation. Therefore they do not seem too useful for
Mutter.
The reason to drop GL_ANGLE_framebuffer_blit support is that it has more
limitations compared to the glBlitFramebuffer in GL_EXT_framebuffer_blit,
GL_NV_framebuffer_bit, OpenGL 3.0 and OpenGL ES 3.0. Most importantly, the
ANGLE version cannot flip the image while copying, which limits
_cogl_blit_framebuffer to only off-screen <-> off-screen copies. Follow-up work
will need off-screen <-> on-screen copies.
Instead of adding yet more capability flags to Cogl, dropping ANGLE support
seems appropriate.
The NV extension is added to the list of glBlitFramebuffer providers because it
provides the same support as ANGLE and more.
Likewise OpenGL ES 3.0 is added to the list of glBlitFramebuffer providers
because e.g. Mesa GLES implementation usually provides it and that makes it
widely available, again surpassing the ANGLE supported features.
Follow-up patches will lift some of the Cogl assumptions of what
glBlitFramebuffer cannot do.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/615
Public functions in C should be declared before they are defined, and
often compilers warn you if you haven't:
```
../cogl/cogl/cogl-trace.c:237:1: warning: no previous prototype for
‘cogl_set_tracing_enabled_on_thread_with_fd’ [-Wmissing-prototypes]
cogl_set_tracing_enabled_on_thread_with_fd (void *data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../cogl/cogl/cogl-trace.c:245:1: warning: no previous prototype for
‘cogl_set_tracing_enabled_on_thread’ [-Wmissing-prototypes]
cogl_set_tracing_enabled_on_thread (void *data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../cogl/cogl/cogl-trace.c:253:1: warning: no previous prototype for
‘cogl_set_tracing_disabled_on_thread’ [-Wmissing-prototypes]
cogl_set_tracing_disabled_on_thread (void *data)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
In this case the function declarations were not included because
`HAVE_TRACING` isn't defined. But we should still include `cogl-trace.h`
because it handles the case of `HAVE_TRACING` not being defined and
correctly still declares the functions defined in `cogl-trace.c`.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/650
`cogl_util_memmem` was used as a wrapper in case `memmem` wasn't
defined, but since commit 46942c24 these are required. In case of
`memmem`, we didn't explicitly require this in the meson build files, so
add that as well.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/629
These are implemented in the Meta namespace these days, where we have
better abstractions for wayland-related types. They also weren't used
anymore, since we removed the unused ClutterWaylandSurface type in the
previous commit.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/624
The idea here is to be able to visualize and immediately
understand what is happening. Something like:
```
[ view1 ] [ view2 ]
[---- Layout ---][------ Paint ------][ Pick ]
[================== Update =====================]
```
But with colors. A few of the previous profiling data
sections were removed, since they didn't really add to
reading the graph.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add the ability to add tracing instrumentation to the code. When
enabled, trace entries will generate a file with timing information
that will be processable by sysprof for generating visualization of
traces over time.
While enabled by default at compile time, it is possible to disable the
expansion of the macros completely by passing --disable-tracing to
./configure.
Tracing is so far only actually done if actually enabled on explicitly
specified threads.
This will be used by Mutter passing the write end of a pipe, where the
read end is sent to Sysprof itself via the D-Bus method 'Capture()'.
By passing that, we have to detect EPIPE that is sent when Sysprof stops
recording. Fortunately, we already ignore the signal at meta_init(), so
no need to add a custom signal handler.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/197
Add debug flags based on meson's `debug` option instead of `buildtype`.
This allows custom build configurations to behave like a debug or release build.
Add `-fno-omit-frame-pointer` to Mutter/Cogl. Not to Clutter though, as that would
require more changes to how Clutter's gir is created
Remove `-DG_DISABLE_CAST_CHECKS` from Clutter in debug builds
Add `-DG_DISABLE_CHECKS`, `-DG_DISABLE_ASSERT` and `-DG_DISABLE_CAST_CHECKS` to all
non-debug builds but `plain`, which explicitly should not have any compile flags
Use `cc.get_supported_arguments`, so it becomes more obvious to the user which flags
are set during compilation
https://gitlab.gnome.org/GNOME/mutter/merge_requests/497
When free'ing a pipeline we destroy the BigState first and then the fragment and
vertex snippets lists using the big state pointer which is now invalid.
This causes a crash when G_SLICE=always-malloc is set and using MALLOC_CHECK_.
So, invert the operations by free'ing the snippet lists first, and the big state
afterwards.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
XLib renderer saves its data as the object cogl user data, however this data
is free'd as part of the object destruction that happens before free'ing the
renderer in _cogl_renderer_free(), from where we're calling the renderer
disconnect vfunc.
Thus in _cogl_xlib_renderer_disconnect() we happen to get an invalid pointer to
CoglXlibRenderer and we try access to it in order to close the X11 display.
This causes all the cogl tests to crash when G_SLICE=always-malloc is set and
when using MALLOC_CHECK_.
Fix this using the renderer winsys custom data instead of using cogl object data
for storing the CoglXlibRenderer, and handling the destruction of it manually.
As bonus this also makes access to the renderer data faster.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/581
By providing an (internal) table to map `CoglPixelFormat`s to their
respective properties we will be able to get rid of the unusual enum
values in the future. This is something we will need once we want to
have support for more pixel formats (such as YUV-based formats).
As an extra feature, we provide a `to_string()` method, which is quite
useful for debugging purposes (rather than deciphering enum values).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/524
We're going to add some features and extra code to CoglPixelFormat, so
it's much nicer to have it in once place. Notice also that it doesn't
make sense that e.g. `_cogl_pixel_format_get_bytes_per_pixel()` were in
a private header, since they were being exported anyway.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/524
GList's used in legacy code were free'd using a g_slist_foreach + g_slist_free,
while we can just use g_slist_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
GList's used in legacy code were free'd using a g_list_foreach + g_list_free,
while we can just use g_list_free_full as per GLib 2.28.
So replace code where we were using this legacy codepath.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/576
Cogl unit tests are just functions inside normal code files that needs to be
dload'ed by the test binary.
So in case unit-tests are enabled, we need to export those symbols.
Since map file can't be overridden, use a configure_file to generate the map
file when tests are enabled, in order to export the needed symbols.
Then goes through the source files to look unit tests checking for their macro
definition and load them with the runner script.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
Use find-conform-unit-tests.sh to create a meson list of tests to run.
This allows to run each test as single test with meson and to remove the timeout
for all the tests.
Instead of changing 'run-tests.sh' to take test-names as arguments we can just
generate simple dummy test-files for each test, without having to change the
tooling.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/442
We already effectively require GLSL, because there's no fixed-function
backend anymore. OpenGL 2.0 drivers don't really exist in the wild, so
just go ahead and require 2.1 or better. 2.1 implies GLSL 1.20 or
better, so simplify that as well.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/489
This is effectively a revert of:
commit 6cfc93f26f
Author: Robert Bragg <robert@linux.intel.com>
Date: Tue Oct 2 11:44:00 2012 +0100
clip-stack: workaround intel gen6 viewport clip bug
It's been over six years, if this bug is still present we should just
fix Mesa already.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/481
If a second `set_{sync,complete}_pending` was queued before the idle
handler had flushed the first then one of them would be forgotten.
It would stay queued forever and never emitted as a notification.
This could happen repeatedly causing a slow leak. But worse still,
`clutter-stage-cogl` would then have `pending_swaps` permanently stuck
above zero preventing the presentation timing logic from being used.
The problem is that a boolean can only count to one, but in some cases
(triple buffering, whether intentional or accidental #334) we need it to
count to two. So just change booleans to integers and count properly.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/216
Meson 0.50.0 made passing an absolute path to install_headers()'
subdir keyword a fatal error. This means we have to track both
relative (to includedir) paths for header subdirs and absolute
paths for generated headers now :-(
https://gitlab.gnome.org/GNOME/mutter/merge_requests/492
As it was originally reported on
https://bugzilla.gnome.org/show_bug.cgi?id=779234#c0, the hottest path was
convert_ubyte() in mesa. Reverting this shows no trace of those hot paths,
nor any higher than usual CPU activity.
As the improvements at the time were real, I can only conclude that pixel
conversion was happening somewhere further the pipeline, and swizzling just
helped indirectly. That got eventually fixed, so swizzling just stayed to
cause grief. And lots it caused.
Time to bin this, it seems.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/486
This basically reverts commit 54735dec, which tried to avoid the
GLib-defined types in favor the standard C ones. One exception to this
is the bool type, for which the commit introduces a new type CoglBool.
Let's just get rid of this type in favor of having consistency with the
GLib types. Note by the way that neither CoglBool nor gboolean (which
has a size of `int`) are completely compatible with bool (size `char`).
https://gitlab.gnome.org/GNOME/mutter/merge_requests/321
Until meson 0.50, setting the install parameter in 'configure_file' is ignored
if 'install_dir' is set. Then until mutter doesn't depend on such meson version
cogl_installed_tests_libexecdir should be empty unless have_installed_tests is
false, or this file will be installed anyway.
See https://github.com/mesonbuild/meson/issues/4160
Commit 25f416c13d added additional compilation warnings, including
-Werror=return-type. There are several places where this results
in build failures if `g_assert_not_reached()` is disabled at compile
time and the compiler misses a return value.
https://gitlab.gnome.org/GNOME/mutter/issues/447
pkg-config files for mutter are generated using *_pkg_deps as requires, but
programs linked with libmutter doesn't need most of these private dependencies
which are only needed for building and linking mutter and its subprojects.
So list packages needed only by mutter itself inside *_pkg_private_deps and
don't expose such packages to pkg-config, but only use them at build time.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Soname of the libraries should be the major version number, while the version
triplet is currently used:
objdump -p libmutter-4.so.0.0.0 | grep SONAME
SONAME libmutter-4.so.0.0.0
While is expected to be only libmutter-4.so.0
Fix all shared libraries by setting valid version and soversion.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/3955
Map files were using wrong syntax (missing final `;` or invalid chars).
Also, the map files were only monitored for rebuilding, but not really used by
ld, so pass the ldflags with version-script so that private symbols are really
hidden.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/395
In plenty of places a non-static function was defined but didn't have
the corresponding declaration. Fix this by adding them, or alternatively
making them static.
cogl-path uses types from glu.h, but to avoid a build dependency on glu,
it kept a minified copy of glu.h in tree. Drop this file and just use
the actual glu.h. To avoid linking to libGLU.so, just use the
includepath, instead of actually adding glu as a real dependency.
This means we can remove an includepath meant to make it possible to
include <GL/glu.h>.
gluTessCallback() expects an equivalent to a GFunc, but we pass
functions with arguments without casting. To get rid of warnings, cast
the callback function pointer to the expected type.
I saw Meson fade from the sky
On the wind I heard a sigh
As snowflakes cover fallen Makefiles
I will say this last goodbye
Meson is now coming
So ends Autotools days
Future is now coming
And we must away
Over Python and without Bashisms
Through lands where never Meson touched
By silver streams that run down to the Sea
Under parsers, beneath old legacy
Over snow one winter’s morn
I turned at last to paths that lead home
And though where the road then takes me
I cannot tell
We came all this way
But now comes the day
To bid you farewell
Many places I have been
Many sorrows I have seen
But I don’t regret
Nor will I forget
All Makefiles that took that road with me
I bid you all a very fond farewell.
If a library is provided in the positional arguments, then meson
defaults to installing the .pc file in a 'pkgconfig' subdirectory
in the library's install location. We want the files in the regular
$libdir/pkgconfig rather than $libdir/mutter-$api/pkgconfig, so
specify the location explicitly in the parameters.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/382
Dependencies are added automatically, and we no longer get warnings
like:
clutter/clutter/meson.build:628: DEPRECATION: Library mutter-clutter-4
was passed to the "libraries" keyword argument of a previous call to
generate() method instead of first positional argument. Adding
mutter-clutter-4 to "Requires" field, but this is a deprecated behaviour
that will change in a future version of Meson. Please report the issue
if this warning cannot be avoided in your case.
While for normal textures, GL_TEXTURE_2D should be used, when it's an external
texture, binding it using GL_TEXTURE_2D results in an error.
Reading the specification for GL_TEXTURE_EXTERNAL_OES it is unclear whether
getting pixel data from a texture is possible, and tests show it doesn't result
in any data, but in case it would eventually start working, at least bind the
correct target for now.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/362
Don't just set the internal format to the dummy format "any", as that causes
code intended to be unreachable code to be reached. It's not possible to
actually know the internal format of an external texture, however, so it might
not actually correspond to the real format.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/362
This makes the build less verbose, as all .gir generation except for
clutters didn't pass --quiet to g-ir-scanner, making it output long
linking commands. Do this by adding a common introspection_args
variable.
While at it, put -U_GNU_SOURCE in there too, as it was always passed
everywhere as without it the scanner would log warnings.
This is the last remaining feature necessary to achieve
parity with the Autotools build.
A few changes were made to the install locations of the
tests, in order to better acomodate them in Meson:
* Tests are now installed under a versioned folder (e.g.
/usr/share/installed-tests/mutter-4)
* The mutter-cogl.test file is now generated from an .in
file, instead of a series of $(echo)s from within Makefile.
Notice that those tests need very controlled environments
to run correctly. Mutter installed tests, for example, will
failed when running under a regular session due to D-Bus
failing to acquire the ScreenCast and/or RemoteScreen names.
When running installed tests, the working directory for Cogl
tests is /usr/libexec/installed-tests/mutter-cogl-4/conform,
which isn't writable by normal users.
To avoid the adding stray hidden files to the current directory,
adapt the runner script to fallback to $(mktemp) - which is
available on all platform we care about - and avoid adding
hidden files everywhere.
Presumably glReadPixels itself can be more performant with pixel format
conversions than doing a fix-up conversion on the CPU afterwards. Hence,
pick required_format based on the destination rather than the source, so
that it has a better chance to avoid the fix-up conversion.
With CoglOnscreen objects, CoglFramebuffer::internal_format (the source
format) is also wrong. It is left to a default value and never set to
reflect the reality. In other words, read-pixels had an arbitrary
intermediate pixel format that was used in glReadPixels and then fix-up
conversion made it work for the destination.
The render buffers (GBM surface) are allocated as DRM_FORMAT_XRGB8888.
If the destination buffer is allocated as the same format, the Cogl
read-pixels first converts with glReadPixels XRGB -> ABGR because of the
above default format, and then the fix-up conversion does ABGR -> XRGB.
This case was observed with DisplayLink outputs, where the native
renderer must use the CPU copy path to fill the "secondary GPU"
framebuffers.
This patch stops using internal_format and uses the desired destination
format instead.
_cogl_framebuffer_gl_read_pixels_into_bitmap() will still use
internal_format to determine alpha premultiplication state and multiply
or un-multiply as needed. Luckily all the formats involved in the
DisplayLink use case are always _PRE and so is the default
internal_format too, so things work in practise.
Furthermore, the GL texture_swizzle extension can never apply to
glReadPixels. Not even with FBOs, as found in this discussion:
https://gitlab.gnome.org/GNOME/mutter/issues/72
Therefore the target_format argument is hardcoded to something that can
never match anything, which will prevent the swizzle from being assumed.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/313
This function gets hit even today on relatively modern Intel systems (I
have a Haswell Desktop with Mesa 18.2.4) if the pixel format is right.
Presumably it makes things slower for no longer a reason.
According to cb146dc515, this
functionality was refactored into a workaround path in 2012. The commit
message mentions the problem existing before Mesa 8.0.2. The number
refers to https://bugs.freedesktop.org/show_bug.cgi?id=46631 .
The use case where I hit this is when improving support for DisplayLink
video outputs. These are used through a "secondary GPU", and since
DisplayLink does not have a GPU, Mutter uses the CPU copy path with Cogl
read-pixels[1]. If the DisplayLink framebuffer was allocated as
DRM_FORMAT_XRGB8888 (the only format it currently handles correctly),
mesa_46631_slow_read_pixels_workaround would get hit. The render buffer is
the same format as the framebuffer, yet doing the copy XRGB -> XRGB ends
up being slower than XRGB -> XBGR which makes no sense.
This patch is not sufficient to fix the XRGB -> XRGB copy performance,
but it is required.
This patch reverts CoglGpuInfoDriverBug into what it was before
cb146dc515.
[1] This is not actually true until
https://gitlab.gnome.org/GNOME/mutter/merge_requests/278 is
merged.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/313
The depth buffer is marked as invalid when 1) the framebuffer is just created,
and 2) whenever GL_DEPTH_TEST is enabled on it. This will ensure the
framebuffers attached depth buffer (if any) is properly cleared before it's
actually used, while saving needless clears while depth testing is disabled
(the default).
https://bugzilla.gnome.org/show_bug.cgi?id=782344
Since now we don't set the swap throttled value based
on sync-to-vblank, we can effectively remove it from
Cogl. Throttling swap buffers in Cogl is as much a
historical artifact as sync-to-vblank. Furthermore,
it doesn't make sense to disable it on a compositor,
which is the case with the embedded Cogl.
In addition to that, the winsys vfunc for updating
whenever swap throttling changes could also be removed,
since swap throttling is always enabled now.
Removing it means less code, less branches when running,
and one less config option to deal with.
This also removes the micro-perf test, since it doesn't
make sense for the case where Cogl is embedded into the
compositor.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/191
This commit includes following fixes for a few shell scripts:
1. Follow the best practice of quoting variables everywhere unless they
are used in places where word-splitting and globbing can never happen.
2. Replace `command` with $(command) because the latter is easier to use
and read.
3. Don't use "$@" in places expecting a string because it is an array
of strings instead of a single string.
Bash is not always installed in /bin and we should not hardcode the path
of it in source code which is expected to be built on many operating
systems and distributions.
Since most scripts using #!/bin/bash here doesn't have any bashism,
they can be converted to #!/bin/sh instead of using /usr/bin/env trick.
This macro was introduced so as to be able to be built without GLib.
However, this feature was long ago removed, and in Mutter we depend on
it anyway, so let's get rid of it in favor of more consistency.
This is based on `g_clear_object`, so it will be a bit more consistent
to write (and prevents the headaches from accidentally forgetting a NULL
check).
If texture allocation fails (e.g. on an old GPU with size limit 2048)
then `cogl_texture_new_with_size` was trying to use the same CoglError
twice. The second time was after it had already been freed.
Bug reported and fix provided by Gert van de Kraats.
https://launchpad.net/bugs/1790525
This will allow CoglFramebuffer and its implementations to be exposed
to GJS and other language bindings. This is a necessary part of the
bigger work to make framebuffer management explicit.
CoglOffscreen is effectively a CoglFramebuffer, but it isn't being marked as
such by the GType machinery. This makes it impossible for introspection to
correctly set this class up.
Fix that by adding a COGL_GTYPE_IMPLEMENT_INTERFACE() code into the declaration
of CoglOffscreen. This does not have any functional changes though.
Meson uses the 'dependencies' field to determine and
parallelize build steps, but that isn't entirely true
with 'link_with'; this might cause a race condition
when generating header files while trying to build
them.
Fix that by only using 'dependencies' instead of 'link_with'.
This commit adds meson build support to mutter. It takes a step away
from the three separate code bases with three different autotools setups
into a single meson build system. There are still places that can be
unified better, for example by removing various "config.h" style files
from cogl and clutter, centralizing debug C flags and other configurable
macros, and similar artifacts that are there only because they were once
separate code bases.
There are some differences between the autotools setup and the new
meson. Here are a few:
The meson setup doesn't generate wrapper scripts for various cogl and
clutter test cases. What these tests did was more or less generate a
tiny script that called an executable with a test name as the argument.
To run particular tests, just run the test executable with the name of
the test as the argument.
The meson setup doesn't install test files anymore. The autotools test
suite was designed towards working with installed tests, but it didn't
really still, and now with meson, it doesn't install anything at all,
but instead makes sure that everything runs with the uninstalled input
files, binaries and libraries when running the test suite. Installable
tests may come later.
Tests from cogl, clutter and mutter are run on 'meson test'. In
autotools, only cogl and clutter tests were run on 'make check'.
Install include files in
$prefix/include/mutter-$apiversion/[clutter,cogl,...,meta]/, and
datafiles in /usr/share/mutter-$apiversion/.... We still would conflict
e.g. given that our gettext name is "mutter", and how keybindings are
installed, but it's a step in the right direction.
There are different unit-tests file generated containing lists of tests
the test-runner.sh should run. Running run-tests.sh read the unit-tests
in the current directory, which is inconvenient to do when using meson.
The docs previously suggested that `cogl_frame_info_get_frame_counter`
returned a timestamp of an unknown clock ID. That's not correct. The
cogl source code shows that it does and must use the same clock as
`cogl_get_clock_time`.
Related to https://gitlab.gnome.org/GNOME/mutter/issues/131
Before we just set it to "none", but this was not enough since various
calls will depend on not just the context being active, but the main
rendering surface.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/21
By the looks of it, commit 95e9fa10ef was taping over an Intel DRI bug
that would make it return post-swizzling pixel data on glReadPixels().
There's been reports over time of that commit resulting in wrong colors
on other drivers, and lately Mesa >17.3 started showing the same symptoms
on Intel.
But texture swizzling works by changing parameters before fragment shaders
and reading pixels from an already drawn FBO/texture doesn't involve those.
This should thus use pixel_format_to_gl_with_target(), which will result in
correctly requesting the same pixel format than the underlying texture,
while still considering it BGRA for the upper layers in the swizzling case.
https://gitlab.gnome.org/GNOME/mutter/issues/72Closes: #72
We just arbitrarily chose the first EGL config matching the passed
attributes, but we then assumed we always got GBM_FORMAT_XRGB8888. That
was not a correct assumption. Instead, make sure we always pick the
format we expect.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/2
On drivers that do not support glGetTexImage2D (i.e. on GLES),
cogl_texture_get_data() has a "feature" that allows it to download
texture data by rendering the texture on an intermediate framebuffer
object and then reading back the data from there. However, this
feature requires the user to have previously set an "active"
framebuffer object in the context, which makes this very tricky
because it is not clear to the developer that he needs to do that
in order for some code to work on GLES (of course it works on
desktop GL, so nobody notices...) and additionally the code actually
crashes if an active fbo is not set!
This patch basically removes this feature in order to prevent
the crash and is in line with how this code has evolved in cogl-2.0:
https://git.gnome.org/browse/cogl/commit/?id=6d6a277b8e9a63a8268046e5258877ba94a1da5bhttps://bugzilla.gnome.org/show_bug.cgi?id=789961
When creating a renderer with a custom winsys (which is always how
mutter uses cogl) make it possible to pass a user data with the winsys.
Still unused.
https://bugzilla.gnome.org/show_bug.cgi?id=785381
The GL_BGRA definition is not available for GLES2 contexts, which use
the EXT_texture_format_BGRA8888 instead, causing a build failure when
trying to use it in those contexts.
Fortunately, this hack is only relevant for GL, so let's guard it to
prevent the failure in GLES2, where that extension is used instead.
https://bugzilla.gnome.org/show_bug.cgi?id=786568
Those are cached and reused across runs, which doesn't qualify to mesa
as "static" indeed. Properly marking those as dynamic is more true, and
brings in slight performance benefits just by avoiding the resulting
(and later silenced) mesa warning.
https://bugzilla.gnome.org/show_bug.cgi?id=782344
Fixes cogl_texture_get_data() resorting to the wrong conversions when
extracting the texture data. This notably resulted in RGB/RGBA buffers
copied as-is into BGRA buffers, for instance for the fullscreen animation,
or single-window screenshots of such buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
The ARB_robustness extension defined the following tokens as
returned by GetGraphicsResetStatusARB (see spec at [1]):
GUILTY_CONTEXT_RESET_ARB 0x8253
INNOCENT_CONTEXT_RESET_ARB 0x8254
UNKNOWN_CONTEXT_RESET_ARB 0x8255
These tokens might not be defined in some GL implementations,
such as Mesa 13's implementation of GLES 2.0, so we need to
define them ourselves not to break those builds.
[1] https://www.khronos.org/registry/OpenGL/extensions/ARB/ARB_robustness.txthttps://bugzilla.gnome.org/show_bug.cgi?id=781398
We already do have a texture with an internal format in these paths,
so we should check the required format according to it.
This fixes CoglAtlasTexture (and CoglPangoRenderer indirectly), as
it forces a RGBA format on its texture, but pixel_format_to_gl()
anyway assumed swizzling is performed on the texture, while it is
not the case.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
This is used by the GL driver in order to determine whether swizzling
actually applies given the bitmap and target texture internal format.
If both agree that they store BGRA, then swizzling may apply.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
If the GL implementation/hw supports the GL_*_texture_swizzle extension,
pretend that BGRA textures shall contain RGBA data, and let the flipping
happen when the texture will be used in the rendering pipeline.
This avoids rather expensive format conversions when forcing BGRA buffers
into RGBA textures, which happens rather often with WL_SHM_FORMAT_ARGB8888
buffers (like gtk+ uses) in little-endian machines.
In intel/mesa/wayland, the performance improvement is rather noticeable,
CPU% as seen by top decreases from 45-50% to 25-30% when running
gtk+/tests/scrolling-performance with a cairo renderer.
https://bugzilla.gnome.org/show_bug.cgi?id=779234
Because the threaded-swap-wait functionality requires XInitThreads(),
and because it isn't clear that it is a win for all applications,
add a API function to conditionally enable it.
Fix the cogl-crate example not to just have a hard-coded dependency
on libX11.
https://bugzilla.gnome.org/show_bug.cgi?id=779039
It's a good guess that the buffer swap will occur at the next vblank,
so use glXWaitVideoSync in a separate thread to deliver a sync event
rather than just letting the client block when frame drawing, which
can signficantly change app logic as compared to the INTEL_swap_event
case.
https://bugzilla.gnome.org/show_bug.cgi?id=779039
When we don't have GLX_OML_sync_control, we still can set the
frame presentation time, but we always use the system monotonic time,
so return that from get_clock_time().
https://bugzilla.gnome.org/show_bug.cgi?id=779039
As previously commented in the code, SGI_video_sync is per-display, rather
than per-renderer. The is_direct flag for the renderer was tested before
it was initialized (per-display) and that resulted in SGI_video_sync
never being used.
https://bugzilla.gnome.org/show_bug.cgi?id=779039
In order to minimize the amount of breakage, while at the same time
making it easier to make backward incompatible changes needed to
continue turning libmutter into a capable Wayland compositor, make the
libmutter and friends (libmutter-clutter, libmutter-cogl*) parallel
installable by adding a version number to the name. This changes
various filenames, for example what previously was libmutter.so is now
libmutter-0.so (assuming the version for now is 0), and
libmutter-clutter-1.0.so is now libmutter-clutter-0.so. The pkg-config
filenames and GObject introspection has been renamed to reflect this as
well.
This enables a downstream compositor rely on a specific version of the
libmutter API, while gracefully handling API/ABI changes by having to
update to the new version at their own pace.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
Different libEGL will do different things for eglGetDisplay since it has
to guess what kind of display it's been handed. Better to just use the
API that makes it explicit.
Signed-off-by: Adam Jackson <ajax@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772422
We need a GLES2 extension macro in cogl-texture-2d-gl.c, but we can't
include GLES2/gl2ext.h because it will conflict with things in
GL/glext.h. We can't rely on cogl including anything for us since it'd
only include GLES2/gl2ext.h if OpenGL support was explicitly disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=774891
EGLDevice requires a define from GLES2, even when GL is used instead.
As type definitions may conflict between the two, we shouldn't include
both at the same time. Instead, provide the missing define explicitly
when not using GLES2.
https://bugzilla.gnome.org/show_bug.cgi?id=774891
Add API to enable the caller to have a custom method for allocating an
external texture. This will enable the possibility for mutter to
generate a texture from for example an EGLStream without having to add
support for that in Cogl.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
Don't rely on the Cogl layer having Wayland specific paths by
determining the buffer type and creating the EGLImage ourself, while
using the newly exposed CoglTexture from EGLImage API. This changes the
API used by MetaWaylandSurface to make the MetaWaylandBuffer API be
aware when the buffer is being attached. For SHM and EGL buffers, only
the first time it is attached will result in a new texture being
allocated, but later for EGLStream's, more logic on every attach is
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=773629
The WL_bind_wayland_display spec says that EGL images should be created
using EGL_WAYLAND_BUFFER_WL as the target and a NULL context. Mesa
seems to be lenient and accept any context, however some other stacks
aren't so forgiving and fail if anything apart from EGL_NO_CONTEXT is
used.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
https://bugzilla.gnome.org/show_bug.cgi?id=769731
Mutter (and libmutter users) are the only users of this version of
cogl, and will more or less only use the cogl-1.0, cogl-2.0 and cogl
experimental API variants, and having the possibility of having
different API versions of the same API depending on what file includes
it is error prone and confusing. Lets just remove the possibility of
having different versions of the same API.
https://bugzilla.gnome.org/show_bug.cgi?id=768977
We bypass our build configuration to fetch API from a version which
isn't the one we actually use. Stop bypassing and just admit that the
1.0 API is still there, but still deprecated.
https://bugzilla.gnome.org/show_bug.cgi?id=768977
CoglFrameInfo is a frame info container associated with a single
onscreen framebuffer. The clutter stage will eventually support drawing
a stage frame with multiple onscreen framebuffers, thus needs its own
frame info container.
This patch introduces a new stage signal 'presented' and a accompaning
ClutterFrameInfo and adapts the stage windows and past onscreen frame
callbacks users to use the signal and new info container.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
Move the KMS interaction from cogl into mutter, where most of the other
KMS interaction already takes place. This also removes dead code which
were only excercised when non-mutter callers used the cogl KMS backend.
The cogl KMS API was updated to pass via MetaRendererNative instead of
via the different cogl objects.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
In cogl use cogl-config.h and in clutter use clutter-build-config.h. We
can't use clutter-config.h in clutter because its already used and
installed.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
If you include a file that might define __INSIDE_COGL_H__, don't
undefine it if it wasn't defined in that file. This makes it possible
to include for example cogl-gles2.h from some other file which defines
__INSIDE_COGL_H__.
https://bugzilla.gnome.org/show_bug.cgi?id=768976
When using a context with robustness, glGetError() may return
GL_CONTEXT_LOST at any time and this error doesn't get cleared until
the application calls glGetGraphicsResetStatus() . This means that our
error checking can't call glGetError() in a loop without checking for
that return value and returning in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
commit 188752158 changed cogl to stop needlessly creating its own
monitor output configuration when mutter would just soon overwrite
it anyway.
Unfortunately, that commit is causing a crash in some cases because
cogl will now create and later draw to a 0x0 egl surface until mutter
sets the monitor layout.
This commit changes cogl to avoid creating and using a surface, before
it knows how big of a surface to create.
https://bugzilla.gnome.org/show_bug.cgi?id=758073
If we get EACCES from drmPageFlip we're not going to get
a flip event and shouldn't wait for one.
This commit changes the EACCES path to silently ignore the
failed flip request and just clean up the fb.
https://bugzilla.gnome.org/show_bug.cgi?id=756926
ES3 provides glMapBufferRange as core, with the added bonus that it also
supports read mappings. Use this where possible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728355
GLES2 does not support passing READ to glMapBuffer; attempting to call
cogl_buffer_map for read on ES2 will bring it down with an assert. Make
sure COGL_DEBUG=journal doesn't do this when it's not possible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728355
On Wayland deinit() of an onscreen buffer is going to destroy the
associated native window of an EGLSurface. So we should destroy the
EGLSurface as well otherwise we might end up confusing the GL driver.
We also currently guard against setting a EGL_NO_SURFACE as current
EGLSurface, but this shouldn't be a problem if we have a surfaceless
context. So we allow surface destruction under that condition.
https://bugzilla.gnome.org/show_bug.cgi?id=754667
If the user switches VTs in the middle of a page flip, the
page flip operation may fail with EACCES. page flipping will
work next time the VT becomes active, so we shouldn't disable
page flipping in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
If cogl fails to open the drm device, initialize gbm, or open the
egl display, then it closes the drm fd, uninitializes gbm, closes the
display and then calls _cogl_winsys_renderer_disconnect which does
most of those things again, on the, now deinitialized, members.
This commit removes the explicit failure handling in renderer_connect and
defers cleanup to disconnect.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
gbm confusingly has two different format types, and cogl
is using the wrong one in some of its calls to gbm_surface_create
This commit fixes the calls that are wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
glGetIntegerv (GL_DEPTH_BITS, ...) and friends are deprecated in GL3; we
have to use glGetFramebufferAttachmentParameteriv() instead, like we do
for offscreen framebuffers.
Based on a patch by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=753295
We want to be able to retrieve the XVisualInfo used when creating the
GL context under GLX and EGL-X11, so that we can use the visual before
we have an onscreen frame buffer.
