gnome-settings-daemon doesn't play the volume change sound when
the volume stayed the same (that is, it is already at its maximum
or minimum). This looks like the right thing to do, so copy its
behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
Commit 8d4855f100 accidentally removed the volume change feedback
for scroll events. Add it back to be consistent again with moving
the slider via arrow keys, slider drags/clicks and gsd's media keys
handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
While those should be concise enough to fit, they may not where
temperatures drop into double-digit negatives. It seems better
to accept some awkward horizontal scrolling in that case than
shorten relevant information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1926
Commit b779f6f728 added a check to filter out invalid weather forecasts.
However the check is currently done when creating UI for the forecasts,
which means we end up with fewer forecasts than we could display if any
forecasts are invalid.
We can avoid that issue by checking the validity while collecting the
forecasts, so do that instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
We currently always start with the current weather info, then append
forecasts. This is slightly confusing, as the only hint that the
first item is special is the past (and potentially "odd") time.
Stop doing that and base all items on forecasts.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
As we get closer to midnight, we show fewer forecasts than we could
fit, or none at all. It makes more sense to continue the forecasts
into the wee hours in that case, so only exclude past forecasts,
but not ones from following days.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Weather stations can have unwieldy long names, which don't fit the
limited space we have available. City names are usually more suitable,
so use the name of the nearest city instead if possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
In case of a very long location name, the label may take up all
available space. Make sure there is at least some spacing between
header and location in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
The two labels use different font sizes, so they don't align properly.
Unfortunately we don't have BASELINE alignment in Clutter, but at least
END comes closer than the default FILL.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Commit c899453800 lifted the requirement of switcher keybindings
to contain a modifier, however it is currently only possible to
finish it by letting it time out.
Improve that by also accepting space/enter key presses to confirm the
selection immediately.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1883
The noModsTimeout obviously finishes inside a timeout callback, which
means `global.get_current_time()` might return Clutter.CURRENT_TIME (ie.
0) when called inside it, because it's not called while handling an
event. This means when switching apps or activating a window, the
timestamp passed to `activate_window` may be 0, which is the reason why
the altTab switcher is currently broken when using modifier-less
keybindings.
Fix that by using `meta_display_get_current_time_roundtrip`, which
always return a valid timestamp, instead of
`shell_global_get_current_time`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/847
Remove setCurrentPage() function, introduce setCurrentPosition() instead,
which allows to have fractional positions.
Make inactive dots smaller, filled and partially transparent, as opposed to
larger and fully opaque active dot. Make dots smaller overall, remove
borders. Interpolate each dot between active and inactive state based on
scroll position.
Make it impossible to "uncheck" the active dot.
Thanks Florian Müllner for parts of the code.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1932https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/843
We slightly delay showing the switcher popup to avoid flashing it
briefly in the common case of quickly switching back-and-forth
between two windows.
However some users perceive this delay as slowness. Address this by
showing the popup immediately when another key press is consumed
(that is, a key like Tab is pressed).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1928
Since the mpris implementation of the notification tray supports showing
multiple notification (one for each player), it doesn't make sense to
have only one global property to store the message, since that only
allows referencing one message at a time.
Instead, handle the MediaMessages completely inside the scope of
`_addPlayer()`, this should allow showing more than one message again,
which broke with commit 4dc44304df [1].
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/791https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
Because the message actor could also be undefined or a already
deallocated ClutterActor, we sometimes fail to show the error message
and get an error from Gjs instead.
So make sure we always log the proper error message and just leave out
the actor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
It may happen that the app icon is destroyed with a drag
monitor still around, in which case, a load of warnings
will be shown.
Make sure to remove any pending drag monitor on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
When removing the last icon of a folder, FolderView first removes
the folder from org.gnome.desktop.app-folders.folder-children, then
proceeds to reset all its keys, which removes the relocatable schema.
That order of operations turns out to be problematic. Removing the
folder from 'folder-children' destroys the folder icon, which in turn
destroys the folder view, which throws a load of warnings in the
journal.
Fix that by removing the folder after resetting the schema keys. In
fact, what we're doing here is not using 'this' anymore.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The variable that holds the list of application icons is
called 'newApps', but that technically was never true,
since we only create new app icons when necessary.
Rename it to 'appIcons'.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The views (AllView and FrequentView) build a list of all applications
they contain. BaseView then diffs between what's currently added, and
what needs to be added, and removed.
This approach has a problem though: creating an AppIcon or a FolderIcon
connects to various signals, and we confuse the garbage collector.
When building the list of applications, instead of always creating new
icons, try to use already existing icons first.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1610
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1694
GWeather.Info.get_value_update() may indicate that the forecast is not
valid, or it may return a timestamp of 0 to indicate the information has
never been updated. In both of these cases, skip creating a widget for
it, as the information will not be accurate.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
If the clock is set to 12h, the AM/PM in the weather forecast times
should be clear from the context, because they are the immediately
following hours. This makes it less likely that the times will be
ellipsized (in which case the AM/PM wouldn't be shown anyway.)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
While we support a reasonable list of layouts nowadays, we don't
include many variants like `fr+oss`. Instead of directly falling
back to the `us` layout, try stripping the variant first, as the
base layout is likely closer to the expectation than `us`.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1907
When cancelling the PolkitAgent session before disconnecting the signal
handlers, we receive a "completed" signal where `gained_authorization`
is set to FALSE, which means we show an error message inside
`_onSessionCompleted()`.
This in turn means we show an error message every time we cancel a
session. In practice this wasn't really relevant so far since we only
destroyed the session when an actual error occurred before. Now that the
dialog supports empty passwords, we also call `_destroySession()` when
the user changes and no longer has a password set, and in this case we
want to cancel the current session without showing an error message.
So to fix this, disconnect the signal handlers before cancelling the
session, which makes sure we don't receive the last "completed" signal
in case we cancelled the session ourselves. This change also allows
removing `this._wasDismissed`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
When a user has no password and a polkit authentication is started,
instead of blindly initiating the admin session, show the regular
"Authentication Requested" dialog (but without the password entry). This
makes sure that the user's admin session is only effectively started
after the user chooses to proceed with the authentication, which
provides an extra confirmation step that can be vital for critical
tasks.
To do this, we show the dialog inside `_onUserChanged()` right after the
dialog was created instead of calling `performAuthentication()` from
`_onInitiate()`. The bug mentioned in `_onInitiate()` is no longer an
issue since we show the dialog in all cases now anyway.
Ideally we should use a different wording than "authentication" when the
user has no password set, and use "confirmation" instead. However polkit
already sends the requests with such messages (e.g. "Authentication is
required to configure software repositories"), and it's important to
show those to the user, so this patch keeps the regular wording.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
Since `_destroySession()` is not only called before we try to initiate a
new authentication session with Polkit, but also when the dialog is
closed, it's currently possible that key focus is grabbed by the close
button after the dialog was dismissed and hidden. This is causing a bug
where after dismissing one of multiple queued dialogs, key focus goes
away and keyboard navigation with the new dialog is impossible.
Fix this by only resetting the UI of the dialog if the dialog is still
opened/visible at that point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/828
Just as with c35b4cede5, there's no
default vfunc implemented by any parent which causes gjs to crash when
trying to call it.
So return EVENT_STOP if the key press successfully toggled the button,
and EVENT_PROPAGATE otherwise.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/830
Modifying variables from an outer scope in functions created in a loop
is considered problematic by eslint, because the variable value in the
resulting closure is often not what the coder intended.
In this particular case however, the scoping is correct, so add a comment
to disable the rule locally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/818
The FolderView class is responsible for creating the 4-item
grid of the folder icon, with the preview of the first four
apps inside the folder.
However, with the deprecation of StAlign as child properties,
the folder icon stopped being horizontally centralized.
Center the folder icon horizontally again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/817
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
If an else block only contains an if statement, the two can be
combined into an if-else block, which cuts down on indentation
and usually helps legibility.
There are exceptions (for instance where the outer if and else
blocks are mirrored), but where it makes sense, change the code
to avoid lonely ifs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
Nesting functions can be helpful for private helper functions, but
here they are accessing some variables from the outer scope and
shadowing others. Split them out to avoid any ambiguity.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
The event blocker in AllView is responsible for stealing click events
from the icon grid and closing the folder popup. The event blocker is
kept unreactive when no folder popup is visible, and it's made reactive
as a response to the 'open-state-changed' signal.
Using this signal, though, is problematic. When opening an app folder,
the icon grid first opens space for the folder to fit in; during this
period, it's possible to click on another folder icon, and break the
icon grid state.
Make sure the event blocker is reactive immediately after clicking on
a folder icon.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1470https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/816
Objects implementing EventSource should have some mandatory methods and
properties, we can ensure this by defining an EventSourceBase abstract
class.
So inherit EmptyEventSource and DBusEventSource from it making sure that
they implement all the needed methods, using native properties and
replacing the 'notify::*' fake signal emissions with proper object
notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Use GObject based objects for ModemGsm, ModemCdma and BroadbandModem.
This allows to define a base class that we can use to natively define
properties and notify property changes.
We can now remove the "fake" notify signals with proper properties
notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Animation background is just wrapping a native GnomeDesktop BGSlideShow
object, so instead of using composition we can now just inherit from the
native GObject, re-using native properties when possible, and avoiding
to keep an extra wrapper to the bg file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Resizing effects are more finicky as other effects, as the actual
animation is delayed until we receive the ::size-changed signal.
However that signal may never be emitted if the window is destroyed
just after starting the size-change effect, in which case the effect
is never completed, blocking mutter from destroying the corresponding
window actor.
Address this by tracking when a resize effect is pending, and complete
the effect when appropriate.
https://gitlab.gnome.org/GNOME/mutter/issues/655https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/815
In the xwayland-on-demand scenario, it may happen that Xwayland is
shutdown (causing a restart of ibus-daemon to drop ibus-x11) while
we are typing.
If we have a bit of bad luck, this will cause the IBusInputContext
to be disposed (due to its bus "closing") at a time when we have
an ibus_input_context_process_key_event_async() request on the fly.
As the object is disposed in between this would tickle JS (rightfully
complaining that it's been disposed under its feet) and make us pass
an actually NULL IBusInputContext to the corresponding _finish()
function (despite the IBusInputContext being still held alive by some
other refs). This will assert and abort in
ibus_input_context_process_key_event_async_finish() then.
To handle this, listen for IBusInputContext::destroy, and reset our
internal state, this way we can compare on the JS side that the
IBusInputContext is indeed an up-to-date one.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/813
I've observed that UPower can occasionally report a charge level of 100%
while the state is still "charging". This usually doesn't last very long
but it is noticeable because the power icon changes to a "missing icon"
icon. This will handle that rare case correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/814
Clutter originally cluttered its namespace with key symbols, before
prefixing all symbols with KEY. We still use the unprefixed symbols
occasionally, replace them so mutter can drop the deprecated symbols.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/808
Since polkit takes a few milliseconds from initiating the session to
emitting the "request" signal, don't introduce visual distraction by
hiding the password entry and showing it again a few ms later.
So start a timeout of 200 ms when we destroy a session and if no session
request (i.e. a request for a password-authentication) happened during
this timeout, hide the password entry.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Since we don't know if polkit/PAM will request a password (emitting the
"request" signal) or use another authentication method like a
fingerprint after the current authentication failed, hide the password
field and make the "Authenticate" button insensitive after cancelling
the session, just like we do when creating the dialog.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Set the key focus to the password field only after we got a request
(and therefore know that a password is requested) instead of using
`setInitialKeyFocus()`. This way we don't try to focus the password
field by default if we aren't showing it (e.g. in case the user has no
password or is using fingerprint login).
Also we have to move the call to `grab_key_focus()` to happen after
`_ensureOpen()`, because otherwise the ModalDialog will set the focus to
one of the buttons while opening itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Show the user avatar for all users, including the root user. The root
user will always have the generic avatar, but it looks more consistent
than showing no avatar at all.
This way we also don't have to worry about the spacing introduced by the
polkit-dialog-user-layout CSS class, which would give the
"Administrator" label a small offset to the left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
xgettext got better at recognizing template strings, so we can
replace more string concatenations. Alas xgettext is still buggy
(surprise, regular expressions are hard), so there are still a
handful of holdouts that prevent us from making a complete switch.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
Every since commit aa394754, StBoxLayout has supported ClutterActor's
expand/align properties in addition to the container-specific child
properties. Given that that's the only container left with a special
child meta, it's time to fully embrace the generic properties (and
eventually remove the child meta).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/780
This wasn't added on the GObject-ification in commit c4c5c4fd5c. This
introduced warnings and misbehaviors when closing the dialog. (Eg.
pressing the "show OSD" pad action would show stack different dialogs
on top each other).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/800
It seems like some recent change (maybe the move to a ClutterActor
subclass for AppIcon) broke the check whether the drag source is an
instance of AppIcon. While the drag source indeed is an AppIcon and
everything else works correctly, the check still returns false, which
breaks the creation of new folders using DnD.
Theoretically it makes sense that this doesn't work, because we're
assigning AppIcon using `var AppIcon =` and that will only get set after
`GObject.register_class()` finished, so accessing `AppIcon` inside that
function seems risky and is probably wrong.
Fix this by comparing to `this.constructor` instead of `AppIcon`, which
works fine and we know for sure exists at this point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/794
I have observed a client in the wild (Chromium again) set CanPlay to
false momentarily while it is loading the next song. Previously, the
code would close the player proxy in that case, meaning that after
playing one track, the MPRIS message would disappear and never come
back.
However, I think this use of CanPlay, while apparently not usual, is not
incorrect according to the spec. We should hide the message instead of
closing the player proxy.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1362
In the wild we have buggy clients (notably Chromium 77 and earlier) that
send metadata with the wrong types. Previously, this would throw an
exception and prevent the MPRIS information from showing up in the
message list.
This changes the code to check if any incoming metadata is of the type
it is expected to be, and logs a warning if not, then continues on with
a default value.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1362
Make gjs to compute the GType name for registered GObject-derived
classes using the file basename and the first directory name, so that we
can avoid name clashing, and ensure that no extension will break the
shell by registering a name that is already used (by the shell or by any
other extension).
This requires gjs commit 02568304 [1] that will be part of release 3.35.2,
so bump the required version as gjs does post-release version bumps.
[1] https://gitlab.gnome.org/GNOME/gjs/merge_requests/337https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/790
Similar to the previous work-around, xgettext gets thrown off by
embedded quotes in template strings, in particular where a template
"breaks up" a pair of quotes.
Throw in some more comments to make xgettext happy, but whoever makes
the gettext toolchain not depend on fragile regular expressions will
be drowned in beverages of their choice ...
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
Xgettext learned about template strings now, which is good. However
it's still buggy, so instead of the "classic" xgettext issue with
backticks, we now have exciting new issues to find work-arounds for.
One issue is that it doesn't detect backticks inside string constants
as regular characters, so having an odd number of backticks throws off
its regex.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
This corrects weird-looking blending visible as it fades out when the
overview closes. Previously the entry's dark background would drown out
the text as it fades out, but now they maintain a consistent contrast ratio
during the fade.
There's no noticeable change in performance, but in theory it should be
faster as text entries don't change at full frame rate. So stage redraws
will usually have a cached searchEntry drawn and require less effort.
Though the main purpose here is to correct the appearance.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/778
The close dialog is added as a child to MetaWindowActor, and, in Wayland
sessions, since commit [1] MetaWindowActor applies a transformation
matrix which scales all it's children using the geometry scale factor.
Now because the dialog actor is not a window (i.e. a MetaSurfaceActor),
but a subclass of StWidget, the scale factor is also applied to the
properties of the dialog by StThemeNode, so we end up applying the
geometry scale twice to the close dialog.
Fix this by applying the inverted scale to the dialog, which leaves the
scaling only to MetaWindowActor. This means we also can't apply a pivot
point other than 0 to the dialog actor, so apply the 0.5-pivot point to
the `_dialog` child of the Dialog class (the actual visible dialog box)
and also perform scaling animations on this child.
[1] https://gitlab.gnome.org/GNOME/mutter/commit/fb9e8768https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/783
Remove all transformations from window actors after a window animation
was either cancelled or finished. Right now we only do that if the
transition finished successfully, which seems kind of pointless (it can
probably be historically explained because the callbacks inside the
"kill-window-effects" signal handler are connected to those
`*WindowDone()` functions though and the `*WindowOverwritten()`
functions were only added later in [1]).
This fixes a recent regression where a window animation would get
cancelled and remain stuck by switching workspaces. The regression
probably happened due to different behaviour of the `onOverwritten`
callback of Tweener and the `onStopped` callback of Clutter transitions:
For the workspace-switching animation the window actors get reparented
to a temporary container, which makes Clutter transititons emit
"stopped" (`clutter_actor_remove_child_internal()` stops transitions on
its children), while Tweener would continue the animation.
[1] 6dd302e5cehttps://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/784
Some vfuncs like `button_press_event`, `button_release_event` and
`touch_event` don't have handlers in the parent classes of
PopupBaseMenuItem. So don't call those handlers and return the default
Clutter.EVENT_PROPAGATE there.
This fixes a crash of the shell that happens when pressing a mouse
button inside the system popup menu and releasing it above a slider like
the volume slider again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/787
We currently only update the windows section when either the focus app changes,
or when the app's windows change (that is, a window is opened or closed). This
allows the menu item labels to become stale if the window title changes after
one of those events (for example when switching tabs).
Fix this by updating menu items when the corresponding window title changes.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1830
g_desktop_app_info_get_categories() may return null. In that case, the
previous code would fail to create a folder when dragging an app with
no categories onto another app. Instead, simply continue with the next
app info.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/782
In the case of bugs in a drag target's acceptDrop() function, it may
throw an exception. In the previous code, this would break out of the
loop entirely and never cancel the drag, so the mouse button release
event would be ignored and you would have to press Esc to get out of the
drag.
In this change, if acceptDrop() throws an exception, we log it and move
on to the next parent target instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/777
Those are two useful ClutterTimeline properties and
will be needed for wiggling the search entry when
failing the password.
Add support for passing repeat-count and auto-reverse
to ClutterActor.ease and ClutterActor.ease_property.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/768
When accessing properties on ClutterActor for size and position there is
a notable access time overhead. This overhead adds considerable user lag
when opening the overview if many windows are open.
This is primarily due to these properties being accessed while sorting
WindowClone instances by their window's center for placement in the
overview. By pre-computing this center value only once when
initializing WindowClone, the induced lag can be significantly reduced.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/763
Overview's animationInProgress, visible and visibleTarget properties are not
meant to be modified from others, but be read only.
So make this clearer using properties getters and private values.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Instead of manually updating properties on change, use native properties
bindings to keep the them synchronized.
Disable hover-tracking and focus-ability when the avatar is not sensitive.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Now that the calendar message list and the message sections are actors, there's
no need to keep track of the sections in a different Map as we can just use the
native clutter functions to manage the children and access to their properties.
Also cleanup the signal connection/disconnection.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When messages are added to the message list, we create a container for those,
however since now the messages are actor themselves we can just create a list
item actor that holds the message actor and refer to the message parent in order
to get their container.
This allows to remove the obj container map we used, using the native clutter
parent-child hierarchy and handle signal connections cleanly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Since all the search result classes are now GObject classes, we can enforce
the methods we want to have in there (just activate() for now) using an
interface, to make sure they are implementing what we require and to easily
group all the classes that can be used as search results, even though they
are not extending SearchResult.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.
Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Dispose the Source Object when dispose() is called, avoiding that it could be
called twice on a destroyed Source.
So, notify count changes before destroying the object, and don't emit this
twice on destroyNonResidentNotifications (as if a notification is destroyed
the property notify will happen in the notification destroy callback anyways).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When the notification is destroyed we should also dispose the underneath GLib
object, and ensure that we don't dispose this twice.
In order to avoid this, don't destroy transient notifications that have been
already been removed and only destroy the resident notifications on activation
if they have not been destroyed earlier.
Thus connect after to the 'activated' signal and once the default handler has
been called destroy the notification if not requested earlier.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
The Keyboard class used to be both a view and controller class, however in order
to make the keyboard a native Clutter.Actor, we need to separate the widget from
the controller class, so that we can manage the actor lifetime from the JS side.
Thus, initialize the keyboard actor on the Keyboard constructor and create a
KeyboardManager class to manage its state and lifetime.
Add proxy methods for the public functions that were used by other shell
components
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Meta.Background has already a 'changed' signal and not to confuse the source
signal with the wrapper one, rename the wrapper class signal into 'bg-changed'.
This will be relevant when we'll inherit from Meta.Background, as signal
emissions from the base class could interfere with the wanted derived class
behavior and with the the grouping of successive changes into a single ::change
emission.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When the screen is marked as idle, we normally start a fading animation and
a timeout to finally lock the screen. This timeout is configured using the
fade time if no longer delay is set in settings.
However if animations are disabled or slowed-down/up, the fade time is
different from the STANDARD_FADE_TIME and so we might end up showing the
lock shield without actually locking for STANDARD_FADE_TIME in the disabled
or slowed-up animations case, or locking too early in case of slowed-down
animations.
So, just adjust the timeout time using the same logic of animations so that
this value is matching all the times.
Related to https://gitlab.gnome.org/GNOME/gnome-shell/issues/1744https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/749
Devices like cameras and microphones are privacy sensitive, as they can
be used to spy on the user. We cannot prevent non-sandboxed apps from
doing that, but as we already track when the microphone is recording,
we can at least show an indicator to make sure it doesn't happen behind
the user's back.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/729
Search result views can include also objects that are not inheriting from
SearchResults (such as the AppIcon) that has not any 'activate' signal, to
connect to. Since we want to enforce a more formal interface, we want to
have just a simpler requirement as an activate() method.
So, instead using the 'activate' signal in SearchResult to activate a result
via SearchResultsBase just implement activate() in the result.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/765
When a transition is set up with a delay, it may be removed before it
actually started. We won't get a ::stopped signal in that case, with
the result that we currently end up with a mismatched unredirection
disabling.
Address this by only disable unredirection once the transition has
actually started.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1788
gnome-session used to show a dialog in this case, but a
notification is more natural nowadays. Doing it in gnome-shell
avoids complicated synchronization between gnome-session and
gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=701212
We share this actor with other shell menus, which arguably track a different
"cursor" as we care of the caret/anchor text positions, and menus care about
pointer click coordinates.
Use a standalone actor for this, so popups/IM are entirely decoupled.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1571
If graphical applications want to start from systemd units, they need to
start after we're properly ready to display them. This is particularly
important under X where `_GTK_FRAME_EXTENTS` and other xprops are needed
to have the right theming.
We're doing this in an idle callback so that the dynamic starting of
`gnome-session-x11-service.target` (which launches `gsd-xsettings`) as
the result of a signal emission happens before us signalling we're ready
for later things to start.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/750
As per clutter optimizations in should_skip_implicit_transition() any
transition will be ignored if applied to an actor with unmapped clones.
Since we initialize the lightbox as hidden, when we use it standalone (as it
happens for the long fade in screenShield) the transition will be ignored.
This causes the lockscreen fade-out after the idle delay not to work, but
instead to have an apparently locked system that is instead not locked at
all.
So, just ensure that the lightbox actor is visible before applying to it any
transition.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1683
The shell tries to spawn the ibus daemon on startup if unavailable, however
as per commit 8adfc5b1 we also force restarting it once the X11 server is
available.
Unfortunately this could cause a race if we disconnect while we were already
connected to an ibus daemon, but still in the process of going through the
various nested calls.
In fact the ::disconnect callback didn't stop any further async ibus call
that, even if failing, would have eventually triggered the emission of a
'ready' signal and to the Keyboard's callback, leading under X11 to a full
grab owned by ibus daemon.
In order to avoid this and keep control of the calls order, use in both
IbusManager and InputMethod a cancellable that is setup before connecting to
the bus, and that is cancelled on disconnection.
Then handle the finish() calls properly, using try/catch to validate the
returned value, taking in account the potential error and just not
proceeding in case of cancellation.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1712
gnome-shell calls ibus_input_context_focus_in() in InputMethod.focus_in()
but the event is not actually forwarded to panels and engines in GNOME
Wayland because gnome-shell changes IBus.Capabilite by focus events and
disables IBus.Capabilite.FOCUS when ibus_input_context_focus_in() is called.
IBus.Capabilite is assumed a fixed value per input context in the
first place and it should not be changed by focus events.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/573
Unset the signal IDs we connected to when starting the drag. Otherwise
we get error messages if a touch drag is ended after a mouse drag
happened because the signal IDs are still set but no signals are
connected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/740
The screen shield creates the unlock dialog based on the session mode.
However since commit 0c0d76f7d6 turned LoginDialog into an actor
subclass (while UnlockDialog kept using the delegate pattern), it is
no longer possible to handle both objects the same way without warnings.
Allow this again by turning UnlockDialog into an actor subclass as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/736
When easing, we need the transition of one of the involved properties
to connect our callbacks. Currently we simply get the transition for
the first property, however as Clutter optimizes the case where a
property doesn't actually change, that transition may be NULL even
though we still animate other properties.
So instead of only looking at the transition of the first property,
try to find a transition for any of the involved properties.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1572
The RenameFolderMenu uses the internal box as a menu item, while PopupMenu
expects to have PopupBaseMenuItem based children with a delegate set.
Instead of using a custom menu with a customized box acting as menu
item,just add a RenameFolderMenuItem that inherits from the parent,
adjusting the features as we need them. In fact, the rename folder menu item
doesn't need any label, padding or default styling so we can reuse
PopupMenuBaseItem after we use our styling properties and we set the
Ornament to HIDDEN.
To get the proper style in place, define rename-folder-popup and
rename-folder-popup-item to override the default popup-menu-item rule
padding instead of using margins.
Pass the menu item as menu's focusActor as this will key-focus it on pop-up,
by overriding the key_focus_in() vfunc we can then delegate the focus
handling to the entry's clutter-text.
Also override the map() vfunc in order to update the entry's content before
mapping the entry.
Finally, use the item's activate method in order to tell the parent menu
we're done with it and that the menu can be closed.
As consequence we can also remove the menu's popup() method, and just use
the default open().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
When the rename folder menu is opened the text entry is expected to be
focused and selected for a quick editing.
While this is required it doesn't actually happens since PopupMenu by
default gives the key focus to the source actor, that is then free to pass
the key focus to the menu if there's an user interaction.
In this case however, we want the text entry to be focused once we prompt
the menu, so just use the PopupMenu's focusActor property to ensure it will
handle it for us.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1604https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The PopupMenuManager is supposed to grab and focus the menu actors, with
normal menus we always need to grab the actual menu but set the key focus to
the source actor so that it will be able to move the focus to the menu
child, if requested.
However there are menus such as the RenameFolderMenu that requires the
key-focus once prompted, so provide a focusActor property (defaulting to the
sourceActor) that can be set in order to define the actor to give the
keyboard focus to, when the menu is popped-up.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1604https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The menu item ornament is used to put dots or checks in menus or otherwise
to define a padding for a label.
However in some cases we want to create a menu item with no left (in ltr)
padding.
In order to do that, define a HIDDEN Ornament mode that completely hides the
ornament actor.
The naming here might be confusing as this should probably be called NONE,
while the default mode is the invisible one, but it's too late to change it
now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
While commit 3094f863 was intended to cancel the ongoing idle hide
timeout before we start a new one, a mistake slipped in there while
rebasing: Obviously we should check if the signal id is NOT 0 here.
This didn't prevent timeouts being started while old ones are still
running and did override `this._idleHideOverlayId`, which caused the old
timeouts to run indefinitely after an overlay actor was destroyed
because we fail early (and don't return TRUE) in `_idleHideOverlay()`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/735
Indicate whether dropping an app icon was successful or not by using the
newly added `animateLaunchAtPos()` API of AppIcon which starts a zoom
out animation of the icon at the position the drop happened.
To get the position of the drag actor, we have to forward the arguments
passed to `acceptDrop()` and `handleDragOver()` to the internal drag
handlers of the WorkspaceThumbnails. We can use this position directly
without transforming it to stage coordinates because the actor is a
child of `Main.uiGroup` and the animation actor will also be a child of
this container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
Add a `animateLaunchAtPos()` method to the AppIcon class to animate the
launch of an app at a given position. This allows for a visual
indication of whether dropping an app icon using DnD was successful at
the position the drop happened in a later commit.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
Return the results of calls to acceptDrop that we forwarded to the
Workspace object.
This fixes a bug where app icons that were dragged and released above a
window clone would get animated back to their original position
(indicating that nothing happened) even though they opened correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
`AppIcon.shellWorkspaceLaunch()` can easily be replaced by checking for
`AppIcon.app` and calling `AppIcon.app.open_new_window()` directly.
For compatibility and to prevent breaking extensions implementing the
function, keep supporting the `shellWorkspaceLaunch` API in AppIcon
while logging a deprecation warning. Also keep supporting the API on
drag sources (without deprecating it) to allow extensions to define
custom actions on their drag sources.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
If the search entry does not have any text typed in and a button press
happens outside of the search entry, we set key focus to NULL to make
the search entry appear unfocused.
This is quite intrusive and can easily cause unwanted focus changes, so
change the captured-event handler to only call `reset()` if the search
entry actually is focused.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/683
Instead of returning and waiting until the old timeout is finished,
start a new idle hide timeout for the overlay when the pointer enters a
window clone. This makes sure the timeout for hiding the overlay after
the pointer left the clone mostly stays the same (except when leaving
the clone via the title or the close button).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/683
As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
Calling await in a loop means the asynchronous operations are
run sequentially instead of in-parallel. Usually that's not
what's wanted, so eslint has a rule to warn about this.
However here we use async/await to handle control back to the
mainloop between steps, so running operations sequentially is
actually intended.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
The intention of the code is clearly to operate on a copy, but that's
not how the Object constructor works. While it doesn't matter in
practice that we modify the passed-in object parameter, it's still
a good idea to fix the code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
The legacy indent rule currently ignores arrow functions in parameters
to allow callbacks to not align with the other arguments:
this._someFunctionWithFairlyLongishName(arg1, arg2, arg3,
() => {
this._someOtherFunctionWithLongName(arg1);
});
But as ignoring entire nodes means we can end up with arbitrary
indentation, we should drop the exception. While this would make
the above "illegal" under the legacy config, it conforms with the
non-legacy style, so everything should be fine ...
... except that eslint starts to complain about some function args
that should be fine under the legacy config. Maybe it's thrown off
by the function-arg-in-arrow-function-in-function-arg structure, but
rather than figuring it out, let's just move those to the new style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
Some more places where the indentation doesn't comply with either
the old or new style. They slipped through because the legacy eslint
configuration accounts for some patterns by plainly ignoring certain
nodes. We'll address that later, first fix up the indentation errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
When there is a transition, it's likely that we are animating some part
of the desktop, and in such situations we don't want to unredirect
fullscreen windows.
This fixes unwanted unredirection when e.g. hiding a modal dialog by
re-enabling the unredirection after the animation has finished, instead
of when it starts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/721
Updating the window list in the Looking Glass is a costly
operation: it destroys a whole lot of actors, and recreates
them. This triggers CSS changes, repaints, and allocations.
It is specially bad when paired with Wayland's big number
of window creations and deletions when showing Builder's
and Epiphany's popup window.
Only update the window list in the Looking Glass when it is
visible.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/556https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/719
Since ES5, it is possible to create objects with no prototype at all:
let foo = Object.create(null);
Those object won't have any builtin properties like hasOwnProperty(),
which is why eslint added a corresponding rule to its default rule set.
While this isn't an issue that affects our code, there's no harm in fol-
lowing the recommendation and call the method through Object.prototype.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
We currently use no less than three different ways of indenting
object literals:
let obj1 = {
foo: 42,
bar: 23,
};
let obj2 = { foo: 42,
bar: 23 };
let obj3 = { foo: 42,
bar: 23
};
The first is the one we want to use everywhere eventually, while the
second is the most commonly used "legacy" style.
It is the third one that is most problematic, as it throws off eslint
fairly badly: It violates both the rule to have consistent line breaks
in braces as well as the indentation style of both regular and legacy
configurations.
Fortunately the third style was mostly used for tween parameters, so
is quite rare after the Tweener purge. Get rid of the remaining ones
to cut down on pre-existing eslint errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
Since disabling an extension will lead to disabling and re-enabling all
following extensions in the list, always disable multiple extensions by
looping through the list in reverse order.
This lowers the execution time of the event handlers quite a bit if many
extensions are installed.
Thanks to Philippe Troin for identifying the problem and proposing the
initial patch to change the extension order when reloading.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/177https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Only push uuids of newly enabled extensions to the `_extensionOrder`
array if enabling them was successful.
Otherwise, since `_callExtensionDisable()` doesn't remove uuids that
weren't successfully enabled from the array, those extensions get added
to the array multiple times when they're disabled and enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
It's currently possible to circumvent the `sessionMode.allowExtensions`
property: For already enabled extensions one can call reloadExtension
via DBus, for new extensions it's possible by adding the extension to
the enabled-extensions gsettings key and setting the
disable-extension-version-validation key (which triggers a reload of
`this._enabledExtensions`) and then calling reloadExtension via DBus.
So to enforce `allowExtensions` while still allowing to update
extensions and keeping the extensionSystem synced with various gsettings
keys, replace the checks for `this._enabled` with simple checks for
`Main.sessionMode.allowExtensions` inside `_callExtensionInit()` and
`_callExtensionEnable()`.
The remaining checks for `this._enabled` are only small optimizations to
prevent running code on irrelevant sessionMode updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Right now we're only handling added sessionMode extensions correctly on
sessionMode updates, also handle the other case and disable removed
sessionMode extensions on sessionMode updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Instead of only logging a message that loading the extension stylesheet
failed and silently returning we should use `logExtensionError` for that
instead. This also sets the extension state to ERROR and makes sure we
don't try to enable it again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
If the extension doesn't exist in the `this._extensions` Map, we'd try
to access `extension.dir` on undefined/null. So set the `dir` variable
after checking if `extension` is defined.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Code and comment were based on the old get_input_rect() and get_outer_rect()
method names that were changed to the more appropriate get_buffer_rect() and
get_frame_rect() a long time ago.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/713
The animation was removed in commit 6a00a504d4 for consistency with
other menus. However commit a9b12d5d73 then *added* animations to
those just four minutes later.
So add back the original animations for consistency, both with menu
closing and with other menus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1595
Remove transitions of the `slide-x` property of the layout manager
before we set the property to a fixed value, otherwise the transitions
might still be running and change the value after we set it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/707
When selecting an area for screenshot we monitor the events while we've valid
coordinates in order to redraw the rubber band.
However, we don't stop ignore the motion events after button release and so
while animating. This might cause an unwanted effect if moving the mouse away
during fade out that is way more visible slowing-down the animations.
To fix this ignore any motion event once we've set the results.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/711
Add a new popover with a regular entry + button to rename
folders. The layout is similar to other GNOME applications.
The popup is implemented as a PopupMenu subclass, leaving
the grab management to PopupMenuManager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/675
We disable and enable extensions inside the `notify::active` signal
handler, but we shouldn't do that in case the change didn't come from
the user but because something else changed the state of the extension.
This causes an issue when the extensionPrefs window is open and the
session gets locked: The extensions are temporarily disabled by the
shell, extensionPrefs updates its switches on the state change and adds
those extensions to the `disabled-extensions` gsettings key inside the
signal handler. Now when the session is unlocked again, the extensions
won't be enabled again since they're forced-disabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/705
We're using a vfunc override for `get_paint_volume` to exclude children
with an opacity of 0 from the paint volume and thus decrease the size of
the area we need to paint.
Now if the paint volume is requested during the spring animation (the
real icons are hidden using an opacity of 0 and clones are used for the
animation), `get_paint_volume` returns a paint volume with a height of
0. After that, the spring animation finishes and the icon-opacities are
set to 255 in `_resetAnimationActors`, and since we cache paint volumes
and there's no reason for Clutter to assume it got invalid, the icons
end up not being painted.
Fix this by queuing a relayout of the grid when the opacity of a child
is changed from or to 0, which manually invalidates the paint volume.
The reason why this is not an issue with the paginated icon grid
(all-apps view) is probably because StScrollView invalidates the paint
volume a lot more often than regular containers.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1502
Extensions might emit JS errors explicitly or implicitly, however GNOME
Shell doesn't present any stack trace for those making them quite hard
to debug.
Make this easier by logging errors with logError() whichs includes the
stack dump.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
When the GridSearchBase actor is destroyed we should remove the
ongoing later that might try to access to invalid resources.
To do this, add an _onDestroy() callback function to SearchResultsBase
and override it in GridSearchBase.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
Easing calls on show/hide functions have some parameters in common whether the
radial effect is enabled or not.
So instead of doing repeated calls with similar parameters, initialize common
values in params objects.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
If the resource scale or the scale factor changes while the animation
is playing, we need to stop the animation and start it again once the
texture is loaded, as the idle might try to access an invalidated
animation child otherwise.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
Commit 21e14bd46f fixed this for the
brightness slider, but we have the same problem for volume too. When the
volume is muted - for example in Settings or via a media key, we update
the slider to '0' to indicate this visually. But we also actually invoke
the slider's callback to *set* the volume to zero. That means that the
previous level is overwritten so it can't be restored when unmuting.
The fix is the same - when we update the slider internally ourselves,
don't call the signal handler.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1557
We now do 2 things along Xwayland startup/shutdown:
- Start or stop the gnome-session-x11-services target, that will
pull all X11 related services that the session might depend on.
- As we start ibus-daemon manually, trigger a restart in order to
toggle the XIM daemon on and off along with Xwayland presence.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
We may need to restart it with different arguments, so make it
possible to do that. Also, avoid to just restart it on _clear(),
this is now most likely through our --replace call than it is
through ibus-daemon eg. dying, avoids some noise in logs as
there is already an ongoing ibus-daemon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
An Endless OS system was found in the wild with a malformed
.local/share/gnome-shell/notifications which causes _loadNotifications()
to raise an exception. This exception was not previously handled and
bubbles all the way out to gnome_shell_plugin_start(), whereupon the
shell exit(1)s. The user could no longer log into their computer.
Handle exceptions from _loadNotifications(), log them, and attempt to
continue. Ensure that this._isLoading is set to 'false' even on error,
so that future calls to _saveNotifications() can overwrite the (corrupt)
state file.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1552
The updatesPermission is currently initialized synchronously, which
blocks the Mainloop for quite some time and therefore slows down startup
of the shell, let's do it asynchronously instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/689
Since we now put a short timeout in before the start of the actual pie
timer we don't start the timer as often as we used to. This allows us to
create a new PieTimer object each time a timeout is started and
therefore play a finish animation independently of other (new) timeouts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
If the circle is complete and the pie timeout finished, we don't need
the lines to the center point indicating the ends of the pie anymore.
We just draw a clean circle instead, which allows for a zoom-out and
fade animation of the circle when we're done.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
If the pie timeout has finished successfully there's no need to cancel
the pie animation, instead we can just wait for that animation to finish
and show some visual feedback like a zoom-out animation to indicate the
click afterwards.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
Fade the pie timer in using a duration of 1/4 of the timeout and a
EASE_IN_QUAD animation. This significantly reduces flickering of the pie
timer while moving the cursor and makes the timer less distracting.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
gjs no longer has an implicit dependency on GTK 3.0, so without
requesting an explicit version, we will get the highest available.
Our code isn't GTK-4 ready, so request 3.0 explicitly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/686
Before the move to Clutters implicit animations with 0846238f6 and
bf497ed64, we used Tweener to do a fake-animation of the opacity and
Tweeners `onUpdate` signal to queue a repaint of the PieTimer everytime
Tweener tries to update the animation.
Now, with Clutters implicit animations, there is no `onUpdate` signal
anymore and also `notify::opacity` no longer gets emitted since the
value doesn't actually change. This lead to the PieTimer no longer being
repainted, which broke the animation.
Fix this by implementing the current angle of the pie using a custom
GObject property `angle` and animating this property using the new
`actor.ease_property` method.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1533
When cancelling the animations of the icon grid, right now we simply
destroy all the clones without resetting the opacity and making the
actor reactive again. So if the spring animation to show the grid is
cancelled by pressing a key to start a search, the icon clones would be
destroyed, but the icon-opacity would still be set to 0. Now if the
Escape key is pressed, viewSelector will show the last active page (ie.
the iconGrid) without a custom animation and only fade in the page, and
because the icons still have an opacity of 0, they will be invisible.
Fix this by always restoring the opacity and reactive property of the
original actors if the animation is cancelled instead of only destroying
the clones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/678
Since we set the proxy value when the slider changes and set the slider
value on proxy property changes, we run into a cycle.
Before commit 3d3dca4aa this was addressed by not notifying on all slider
changes, but only in reaction to direct user action. Given that since the
splitting out of the BarLevel class those events are handled in a subclass,
that approach is at least unconvential and fairly fragile.
Instead, make the brightness indicator ignore any changes to the slider it
initiated itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1500
With 8b368d010 we fixed a bug where the onComplete callback was always
called no matter whether the transition was interrupted before or not.
This exposed another bug: viewSelector depends on this behaviour when
fading out pages: After fading out a page, we call `this._animateIn` to
show the new page. Now if the fade-out animation gets interrupted, with
the correct behaviour of onComplete we end up not showing a new page and
the viewSelector remains empty instead. One case where this happens is
when pressing a key to start a search during the overview-animation.
Obviously we also want to show the new page in case the fade-out
animation was interrupted, so use the onStopped callback instead of the
onComplete callback here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/674
An actor ease callback could destroy the actor, in such case we should do not
touch the actor anymore.
So, before calling the callback, reset restore the easing state and don't
perform any further action with it.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1507
When a drag is cancelled and the source actor
is visible, the drag actor is animated back to
the source position. The scale that the drag
actor will become is calculated as:
scale = this._dragActor.width / sourceScaledWidth
However, this is wrong; what we wanted to do
is the opposite:
scale = sourceScaledWidth / this._dragActor.width
Fix the scale calculation to match the math
above.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
Create a new folder when dropping an icon over another
icon. Try and find a good folder name by looking into
the categories of the applications.
Delete the folder when removing the last icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
Because the Dash icons are not drop targets themselves,
add a tiny DashIcon class, which is an AppDisplay.AppIcon
subclass, and disable all DND drop code from it.
Show a folder preview when dragging an app icon over another
app icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
As per design direction, scale and fade the app icon
when starting dragging it, and show it again if the
drop is accepted. Clutter takes care of animating the
rest of icon positions through implicit animations.
Scale and fade the dragged icon while it's being dragged.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
Since the `notify::allocation` signal will obviously get emitted while
the actor is inside an allocation cycle and we might end up doing
changes to its allocation inside `updateSearch` by hiding or showing the
actor (which queues a relayout), we get a warning from Clutter.
Fix this by delaying the call to the parent method until the next
redraw, which should happen a few moments after the current relayout.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/672
Since commit 1a27ff6130 we use the
allocation width of the GridSearchResults actor to calculate the max
number of results that can be shown for this search provider.
On the first run of the search, when no previous (cached) allocation is
available for the actor of GridSearchResults, the allocation width used
in `_getMaxDisplayedResults` will be 0, which in turn will make
`updateSearch` filter out all results returned by the search provider.
Now if this search provider is the only search provider that's enabled,
after calling `updateSearch`, the `SearchResults` class will call
`_updateSearchProgress` to check if any results are visible, assume
nothing was found and therefore hide the scrollView. This in turn causes
the GridSearchResults actor to not get a new allocation, which prevents
our code to fixup the max number of results on `notify::allocation` from
working: The number will continue to be 0 and we'll never show any
results.
To fix this regression, return -1 in `_getMaxDisplayedResults` if the
allocation width is 0 to inform `updateSearch` that we can't calculate
the maximum number yet and interpret a return value of -1 as "show all
results" in `updateSearch`. The same problem would probably also appear
if the allocation width is anything between 0 and the width of the
iconGrid with one icon in it, although this might as well be a valid
width in case a very small screen is used or with very large icons. So
let's only check for a width of 0 and hope the GridSearchResults actor
won't get weird temporary allocations in that range.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/672
Just as we animate the apps launch using the zoom out animation if the
'new-window' action provided by the app is launched, we should also show
this animation if the 'activate-discrete-gpu' action provided by the app
via its AppInfo is launched.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/673
For the "New Window" entry we add to the AppIcons popup menu we should
always animate the app icon if the menu entry is activated as it was
intended by commit 62786c09a8.
For the "Launch using Dedicated Graphics Card" entry we can also always
show the animation if the entry is activated since the entry should only
be visible if the app is stopped.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/673
Clocks has exactly the same issue as Weather: Its integration currently
relies on accessing its settings directly, which isn't possible when
the app is sandboxed.
Fix this the same way we did for Weather, by adding our own setting
and syncing it with the app via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
We add our own "New Window" menu entry if the app doesn't already
provide a 'new-window' action. For this menu entry, we show the zoom out
animation on the app icon when the user clicks the entry.
To be consistent in case the app already provides its own 'new-window'
action via its AppInfo, also show the zoom out animation when this
action is activated.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/662
As pointed out by designers, fading it signals that the
icon grid is not a drop target, when now it actually is.
Remove the fade effect applied to the icon grid when
dragging. Since this is the only caller of fadeIn() and
fadeHalf(), also remove these methods.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
App icons inside folders are already animated when the folder is
opened, but moving an app icon from a folder doesn't, making the
transition abrupt.
Fortunately, it's easy to detect icons that were previously hidden
but are not anymore.
Add an animation to these icons when showing.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
This is necessary for being able to drag application icons
to folders in different pages.
Add a drag motion handler to AllView and handle overshoots
when dragging. Only handle it when dragging from AllView.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
After dropping an application into the folder icon, the
list of applications is updated but the folder icon itself
is not.
Introduce BaseIcon.update() and call it from FolderIcon
when redisplaying.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
The event blocker is an actor that is added in between the
icon grid and the app folder popup in order to guarantee
that clicking outside the app folder will collapse it.
However, the next patch will require allowing dragging events
to be passed to folder icons, and the event blocker gets in
our way here, preventing drag n' drop to work properly.
Add an API to inhibit the event blocker. This API will be
used by the app folders while an item is dragged.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
When plugging in a device with sensors that are unsupported by
iio-sensor-proxy, the proxy may quit so fast that the name disappears
from the bus before we get to construct the SensorProxy in response
to the name-appeared handler, resulting in the following warning:
JS ERROR: TypeError: this._sensorProxy is null
_sensorProxyAppeared/this._sensorProxy<@resource:///org/gnome/shell/misc/systemActions.js:217:17
_makeProxyWrapper/</<@resource:///org/gnome/gjs/modules/overrides/Gio.js:243:21
Address this by creating the proxy unconditionally instead of monitoring
the bus name, and using the g-name-owner property to determine whether
iio-sensor-proxy is active.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1357
When transitioning to or from the overview, windows travel
a certain distance between their real desktop position and
their place in the overview window grid. The less this travel
distance is, the smoother, more polished, and less jarring
the overall transition looks. This is why it makes sense to
try reordering and repositioning windows to minimize their
travel distance. That being said, there are other factors
that impact the quality of the overview layout, such as how
much the windows get scaled and what portion of the overall
available space they take up.
The existing code tries to minimize the travel distance by
sorting the windows in each row by their horizontal position.
There are, however, two problems with this implementation.
First, it compares the coordinates of windows' left edges as
opposed to their centers, which means it yields unexpected
results when a small window is positioned next to the left
edge of a large window. Second, it completely disregards
vertical coordinates, instead assigning windows to the grid
rows using their monotonically increasing window numbers,
effectively vertically sorting them by the order they were
created in.
This commit changes both vertical and horizontal ordering
to work based on the coordinates of the geometric centers
of the windows. That is to say, windows are first assigned
to grid rows based on the vertical coordinates of their
centers, and subsequently sorted inside each row based on
the horizontal coordinates of said centers. In my testing,
this leads to a much more intuitive and visually pleasing
window placement.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/267
GDBusProxy::g-properties-changed is also emitted when the name drops from
the bus, at which point any properties will be null. That's not a valid
gsettings value, so to avoid the corresponding warning, move the g-name-owner
check accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
Those checks were carried over from the very first DND implementation;
if they were ever actually required at all, this is no longer the case
as we moved away from Tweener for all our animations.
The number of cases where an extension is still using Tweener, creates
draggable actors, *AND* requires the checks for proper functioning
should be indistinguishable from zero, so drop the code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/669
By now, Tweener is used exclusively to animate changes to the
StAdjustment:value property. But not for long, as now that we
implement the same transition API as Clutter.Actor, we can
re-use the existing convenience method for property transitions
for adjustment changes as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/669
The tracking was important in an earlier iteration, but as the helper
functions now remove overwritten transitions before setting up the
new ones, we can just as well connect to the ::stopped signal directly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/668
This is rather embarrassing - we currently confuse the transition with
the finished parameter, which means we always run the onComplete handler
no matter whether the transition was interrupted or actually completed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/668
Commit 0f178c3b3d added a shortcirtuit to avoid running
an animation on an invisible actor. However, it introduced
a bug where the current page is not properly updated. That
leads to the wrong set of icons being animated under some
circumstances.
Update the current page even if we bail out early.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/667
Properties that aren't marked as animatable don't support *implicit*
animations, but they can still be animated with explicit transitions.
Use the newly added convenience method to cut down further on Tweener
usage.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
While we are now using implicit animations for all animatable properties,
there are still some cases where we animate other actor properties (for
example from a custom subclass) or associated objects like effects.
Those can still be animated using Clutter animations, as long as we use
the explicit API rather than implicit animations. Again this API is
cumbersome and tricky enough to warrant a convenience wrapper.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
Clutter animations work on GObject properties on animatables. The
last commit took care of the latter by turning all animated objects
into actor subclasses, now it's time to make all properties used
in Tweens into GObject properties.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
We have a couple of places where we don't tween the actor, but a
custom property on the delegate object. In order to move those
to Clutter animations, we will need an animatable, so turn those
objects into widget subclasses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
The set_brightness() method is the most convenient way of controlling
the effect's brightness, but Clutter animations only deal with properties,
so start using the (ClutterColor) brightness property instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
Currently WindowDimmer exposes a JS property that is used to control the
underlying effect. This works fine with Tweener, but not with Clutter
animations which we want to use ultimately.
As a first step towards that, expose a setDimmed() method instead of
the property and handle the animation internally, so it can be adapted
more easily.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
We now have everything in place to replace Tweener for all animatable
properties with implicit animations, which has the following benefits:
- they run entirely in C, while Tweener requires context switches
to JS each frame
- they are more reliable, as Tweener only detects when an animation
is overwritten with another Tween, while Clutter considers any
property change
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Setting up implicit animations is more verbose than using tweener, in
particular when setting up a callbacks to run on overwrite or completion.
In order to make its use more convenient, monkey-patch ClutterActor
with an ease() method that works similarly to Tweener.addTween().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Being able to slow down animations is a helpful debugging tool; to not
lose it when starting to use Clutter's implicit animations, monkey-patch
the appropriate methods to support our global slow down factor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
As we currently use Tweener for all animations, we have a single place
for hooking up the enable-animations and slow-down-factor settings.
However that will no longer hold true when we'll start to use Clutter's
built-in animation facilities, so add a small helper function that
applies the necessary adjustments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Notifications use a transition that overshoots the target value, however
we can only really do that for the position and not the opacity where
some values would end up out of the valid range.
We currently address this by proxying the actual opacity property in a
javascript property, and clamp it to the valid range in an onUpdate()
callback.
This won't be an option if we want to use Clutter animations, so instead,
use separate tweens for opacity and position.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Unlike Tweener, which doesn't know or care about actor state, Clutter
will skip implicit animations on actors that aren't mapped. This makes
sense of course, but it will break the page indicator animation we
do on map: When we get notified about the container being mapped, the
individual indicators (which are the actors being animated) are still
unmapped.
Resolve this by deferring the animation to a LaterFunc.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
For animating the arrows on the screenshield, we currently use a custom
transition function that tweens the opacity from 0 to maxOpacity in the
first half of the animation, and from maxOpacity back to 0 in the second
half.
This doesn't easily translate to Clutter's own animation framework, so
replace the custom transition with two consecutive tweens which do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Dash items are currently animated via the custom "childScale" and
"childOpacity" properties. However since commit efb3025d8c, those
properties actually control the scale-x/scale-y and opacity properties
of the actor itself (not the child), so cut out the intermediate
custom properties in favor of the "real" ones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
When expanding a submenu, we currently use a single tween to animate
both the submenu actor and the source arrow. We do this by tweening
a monkey-patched JS property on the main actor, which we then use
to update the arrow's GObject property on updates. As Clutter cannot
animate random JS properties, this trick will prevent us from using
implicit animations here.
The only reason I can think of for using a single tween is to keep
both animations in perfect lock step, but as expansion and rotation
are visually quite distinct, this shouldn't be required, so just
set up separate animations for each actor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Now that redisplaying is a lightweight operation that only
adds and removes what changed, we can not be concerned about
redisplaying on folder changes.
Redisplaying will be necessary when custom order in the app
grid is implemented, in order to update not only which icons
are hidden, but also their position.
Call _redisplay() in AllView when folders change.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
FolderView and AllView currently check if the item is
present in the BaseAppView._items map, in order to avoid
adding the same icon multiple times.
Now that BaseAppView._loadApps() has a different role --
it returns a list with all app icons, and BaseAppView
diffs with the current list of app icons -- checking the
BaseAppView._items map is wrong.
Make sure there are no duplicated items in the temporary
array returned by all _loadApps() implementations. Remove
the now unused BaseAppView.hasItem() method.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
BaseAppView currently removes all icons, and readds them, every
time the list of app icons needs to be redisplayed. In order to
allow animating app icon positions in the future, however, we
cannot destroy the actors of the app icons.
Previous commits paved the way for us to do differential loading,
i.e. add only the icons that were added, and remove only what was
removed.
Make the BaseAppView effectively implement differential loading.
The BaseAppView.removeAll() method is removed, since we do not
remove all icons anymore. BaseAppView._loadApps() now returns an
array with the new apps, instead of putting them directly at the
BaseAppView lists.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
Next commit will introduce differential loading of
app icons, and will reorganize this part of the
codebase.
When doing that, the ideal symmetry of the new code
would be:
* Update BaseAppView._allItems array
* Update BaseAppView._items map
* Update BaseAppView._grid actor
Move the code in _loadGrid() into _redisplay() so that
we can check in-place which new icons need to be added.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
Now that the three views follow the exact same loading routine
(remove all + load apps + load grid), we don't need each view
call loadGrid() directly anymore.
This is an important step in order to animate adding and removing
icons, since now we can diff old and new app icons properly.
Move all calls to BaseAppView.loadGrid() to a single one after
BaseAppView._loadApps(). Also add the underscore prefix, since
this is now considered a protected function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
FrequentView is another view that is slightly not unified with how
BaseAppView expects subclasses to load app icons. Instead of using
BaseAppView.addItem() and then calling BaseAppview.loadGrid(), it
adds the app icons directly to the icon grid.
Make FrequentView add icons using BaseAppview.addItem(), and load
the icons using BaseAppView.loadGrid().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
Future patches will diff the old and new icons of views, in order to
animate them when necessary (e.g. adding an app icon to a folder, or
from a folder back to the app grid). In order to do that, all views
must be streamlined in how they load app icons.
Currently, FrequentView and AllView are already following the behavior
expected by BaseAppView, but FolderView isn't. Its icons are loaded by
FolderIcon, and FolderView doesn't implement BaseView._loadApps(),
which makes it impossible to diff old and new apps.
Move the app icon loading routine from FolderIcon to FolderView, by
implementing the _loadApps() method.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
The different units - seconds for Tweener and milliseconds for
timeouts - are not a big issue currently, as there is little
overlap. However this will change when we start using Clutter's
own animation framework (which uses milliseconds as well), in
particular where constants are shared between modules.
In order to prepare for the transition, define all animation times
as milliseconds and adjust them when passing them to Tweener.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/663
Our current Weather integration depends on poking around the app's
settings, which we cannot do when the app is sandboxed (as its
filesystem is "hidden away" in a container in that case).
So instead, use our own GSettings schema for the settings, and sync
it with GNOME Weather via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
Since commit 007d30573 we use an actor effect to apply the radial effect and
we pass the effect to the tweener in order to animate it.
However, we always still remove the previously added tween from the actor,
instead that from the actual target.
So, depending the radial effect state, remove the tweens from the proper target
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/653
We currently assume that user icons are square, which is the case when
set by the users settings panel, but not enforced by AccountsService.
Handle that case by moving the pixel size back to the actor and using
an appropriate background-size style property of 'cover' (which means
the smallest dimension of the image is scaled to fit the desired size).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1144
A generic, introspectable Shader effect is not only more flexible
than a shader actor, it will also make it much easier to turn
Lightbox into an actor subclass and replace Tweener with Clutter's
own animation support.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/651
Due to typecasting being done when converting floats to integers in
gnome-settings-daemon, a volume of 0.9% in g-s-d will end up as 0% in
gnome-shell. This can lead to a mismatch of icons between the volume OSD
(the icon to use is determined by g-s-d itself) and the shells own
volume indicator (the icon to use is determined by the shell using the
volume received from g-s-d).
To fix this, simply get rid of the conversion from float to percentage
in g-s-d and back to floats in the shell and just send a float/double
value on DBus.
https://gitlab.gnome.org/GNOME/gnome-settings-daemon/merge_requests/78https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
LevelBar is not really used, all the checks are implemented inside
BarLevel as well and the accessible name is wrong because the osdWindow
doesn't only show the volume, but also the brightness and other things.
The workaround for updating the bars width is also no longer needed now
that we have BarLevel.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
There are some cases (for example when tweening value changes), where
the level will be set to the same value it already is at. Avoid those
unnecessary repaints by checking whether the value is already used and
returning if it is.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
AppIcon makes itself draggable, and handles the various DnD
routines such as 'drag-begin' and 'drag-end' by making the
Overview emit the appropriate signals.
However, when destroyed, the AppIcon does not try to finish
any drag operations that started. That causes the event
blocker in AllView not to be updated correctly when dragging
icons to outside folders.
Make AppIcon emit 'item-drag-end' when a drag operation
started and it's destroyed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/643
The functions here are asynchronous to handle control back to the
mainloop while waiting for an action to complete, not to run operations
in parallel. That is, the race condition the rule is protecting against
isn't an issue here, so disable the error.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
This was left-over in commit 2743f18af, and probably is the real reason
why the busy spinner wasn't using the shared AnimatedIcon.Spinner class:
The animation there was much slower.
Still, let's keep the code as-is for now, if we really need a different
animation time, we can add an optional constructor parameter to the
Spinner class.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/640
At the moment the only way to open a folder icon is to click on it;
there's no API to open the icon programmatically.
This commits adds an open method and makes the click handler use
it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
When a FolderIcon is opened, it asks the parent view to allocate
space for it, which takes time. Eventually, the space-ready
signal is emitted on the view and the icon can make use of the new
space with its popup. If the icon gets destroyed in the
interim, though, space-ready signal handler still fires.
This commit disconnects the signal handler so it doesn't get called
on a destroyed icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
It is important that the FolderView of a FolderIcon always
gets destroyed before the AppFolderPopup, since the view
may or may not be in the popup, and the view should
get cleaned up exactly once in either case.
This commit adds a destroy handler on FolderIcon to ensure
things get taken down in the right order, and to make sure
the view isn't leaked if it's not yet part of the popup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
At the moment AppFolderPopup calls popdown on destruction,
which leads to open-state-changed getting emitted after
the actor associated with the popup is destroyed.
This commit handles ungrabbing and closing from an
actor destroy handler to side-step the open-state-changed
signal.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
If an icon already exists in an app view with the same id, the
duplicate is not added on a call to addItem. Unfortunately,
since it's not added, the icon actor gets orphaned and leaked.
This commit address the problem by introducing a new hasItem
method and disallowing callers to call addItem with a duplicate
in the first place.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
meta_later_add() is modelled after g_idle_add() and friends, and
the handler's boolean return value determines whether it should
be scheduled again or removed. There are some places where we omit
the return value, add them (although the implicit return value of
"undefined" already gives us the intended result).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/637
The startup/busy indication in the app menu was left out of commit
22e21ad7d1 because it doesn't use a hard-coded image, but as the
image in the CSS is actually the same used by the spinner class,
drop the "custom" styling and use the regular spinner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/636
Trying to disable an extension that is enabled by the session mode
currently has no effect, which is clearly confusing. We could update
the various extension UIs to reflect that via sensitivity, but being
unable to configure extensions based on which session the user picked
at login isn't obvious either.
So instead, add a 'disabled-extensions' gsettings key to list extensions
that should not be enabled which takes precedence over 'enabled-extensions'
and can be used to disable session mode extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Now that extension loading and the extensions map are no longer shared
between the gnome-shell and gnome-shell-extension-prefs processes, we
can move both into the ExtensionManager which makes much more sense
conceptually.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
By direclty using the underlying GSetting, whether or not an extension
appears as enabled or disabled currently depends only on whether it is
included in the 'enabled-extensions' list or not.
However this doesn't necessarily reflect the real extension state, as an
extension may be in error state, or enabled via the session mode.
Switch to the extensions D-Bus API to ensure that the list of extensions
and each extension's state correctly reflects the state in gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Extensions are used to calling the getCurrentExtension() utility function,
both from the extension itself and from its preferences. For the latter,
that relies on the extensions map in ExtensionUtils being populated from
the separated extension-prefs process just like from gnome-shell.
This won't be the case anymore when we switch to the extensions D-Bus API,
but as we know which extension we are showing the prefs dialog for, we
can patch in a simple replacement that gives extensions the expected API.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Each row represents an extension, so it makes sense to associate the
rows with the actual extensions instead of linking rows and extensions
by looking up the UUID in the external extensions map in ExtensionUtils.
This will also make it much easier to stop using the shared extension
loading / map in favor of the extension D-Bus API.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Whether or not an extension can be enabled/disabled depends on various
factors: Whether the extension is in error state, whether user extensions
are disabled and whether the underlying GSettings keys are writable.
This is complex enough to share the logic, so add it to the extension
properties that are exposed over D-Bus.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The existing 'ExtensionStatusChanged' signal has a fixed set of parameters,
which means we cannot add additional state without an API break. Deprecate
it in favor of a new 'ExtensionStateChanged' signal which addresses this
issue by taking the full serialized extension as parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Serializing an extension for sending over D-Bus is currently done by the
appropriate D-Bus method implementations. Split out the code as utility
function and add a corresponding deserialization function, which we will
soon use when consuming the D-Bus extension API from the extension-prefs
tool.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Extensions are currently enabled or disabled by directly changing the
list in the 'enabled-extensions' GSettings key. As we will soon add
an overriding 'disabled-extensions' key as well, it makes sense to
offer explicit API for enabling/disabling to avoid duplicating the
logic.
For the corresponding D-Bus API, the methods were even mentioned in
the GSettings schema, albeit unimplemented until now.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
While public methods to enable/disable extensions make sense for an
extension manager, the existing ones are only used internally. Make
them private and rename them, so that we can re-use the current
names for more useful public methods.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The extension system started out as a set of simple functions, but
gained more state later, and even some hacks to emit signals without
having an object to emit them on.
There is no good reason for that weirdness, so rather than imitating an
object, wrap the existing system into a real ExtensionManager object.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
It makes sense to keep extension-related enums in the same module instead
of spreading them between ExtensionSystem and ExtensionUtils.
More importantly, this will make the type available to the extensions-prefs
tool (which runs in a different process and therefore only has access to
a limited set of modules).
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Commit bd18313d12 changed to a new naming scheme for battery icons,
and used to old icon names as fallback-icon-name for compatibility
with older/other icon themes.
However that fallback code isn't working correctly, as GThemedIcon's
default fallbacks will transform a name of `battery-level-90-symbolic`
to a list of names:
- `battery-level-90-symbolic`
- `battery-level-symbolic`
- `battery-symbolic`
The last one frequently exists, so instead of the intended fallback,
we end up with a generic battery icon.
Address this by specifying the icon as GIcon instead of an icon-name,
where we have more control over how the icon is resolved.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1442
Just as we did for the workspace switcher popup, support workspaces
being laid out in a single row in the window picker.
Note that this takes care of the various workspace switch actions in
the overview (scrolling, panning, touch(pad) gestures) as well as the
switch animation, but not of the overview's workspace switcher component.
There are currently no plans to support other layouts there, as the
component is inherently vertical (in fact, it was the whole reason for
switching the layout in the first place).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
While mutter supports a variety of different grid layouts (n columns/rows,
growing vertically or horizontally from any of the four corners), we
hardcode a fixed vertical layout of a single column.
Now that mutter exposes the actual layout to us, add support for a more
traditional horizontal layout as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
Extension preferences Application class is just a container for a GtkApplication
so instead of using composition we can inherit from the base GObject class.
Also replace signal connections with vfunc's.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/631
In some cases the style-changed signal hasn't been emitted when
_computeLayout() is called, resulting in the use of the default spacing
and item size values for the calculations.
One case where this happens is when starting a search. Right after the
initialization of GridSearchResults, _computeLayout() is called from
_getMaxDisplayedResults() and the style-changed signal hasn't been
emitted yet. The computed layout will be wrong and the maximum
number of results will also be wrong.
To prevent this from happening, make sure the style has been updated
before doing the calculations in _computeLayout().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The calculation of how many results can be shown in GridSearchResults is
broken: The width of the parent container (resultsView.actor) we're
using as the maximum width right now is the width of the scrollView of
SearchResults (which always expands to the whole screen size). This
width will only be correct if the scrollView (ie. the whole screen) is
smaller than the max width of searchResultsContent, which only is the
case for screens smaller than 1000px.
To fix the calculation, use the width of our own actor and don't get it
using clutter_actor_get_width(), but using the last allocation of the
actor. This way we don't get the preferred width if the actor is not
allocated at this point (it's hidden by _ensureProviderDisplay() when
starting a new search).
Then, when the allocation of the actor changes, rebuild the grid search
results by calling updateSearch() with the old arguments to ensure the
number of visible results is correct. The fact that we're only listening
for allocation changes here is the reason why we never want to use the
preferred width of the actor inside _getMaxDisplayedResults(): While
the actor is hidden clutter_actor_get_width() would return the preferred
width, which we'd then use the as the maximum width. But if the actor
had a correct allocation before, no notify::allocation signal will be
emitted when the actor is shown again because the allocation is still
the same, and we'll end up using the preferred width as maximium width
forever.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The functionality the searchResultsBin container provides can easily be
moved into a subclass of St.BoxLayout, no need for an additional StBin.
The "searchResultsBin" css class isn't used in the stylesheets either.
Same with the scrollChild container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
Object.prototype.hasOwnProperty() is more precise than checking for
falsiness, for instance the following is true:
{ foo: undefined }.hasOwnProperty('foo');
However when checking for a handler ID, a more relaxed check is more
appropriate, as particularly 0 is not a valid handler ID.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/626
For some reason, people are still seeing those after commit d5ebd8c8.
While this is something we really should figure out, we can work around
the issue by keeping the view actors hidden until the update is complete.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1065
Window previews are sometimes shown translucent, for example during
drags or animations. They can also have attached dialogs, in which
case the opacity should affect the combination of all windows instead
of being applied to each window individually, blended together, so
make sure they are redirected as a whole when necessary.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/774
Whether people love or hate the hot corner depends in large extents
on hardware sensitivity and habits, which is hard to get right
universally. So bite the bullet and support an option to enable or
disable hot corners ...
https://bugzilla.gnome.org/show_bug.cgi?id=688320
GNOME Shell is spitting out some errors in the journal due to its attempts
to speak to PackageKit, which is not present on Endless OS, so let's add
some runtime checks to make sure that PackageKit is actually available
before assuming so and using its proxy to decide which kind of UI to
show to the user when ending the session.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/369
The first parameter to Object.assign() is the same target object that
will be returned. That is, since commit 46874eed0 Params.parse() modifies
the @defaults object. Usually we pass that parameter as an object literal
and this isn't an issue, but the change breaks spectacularly in the few
cases where we use a re-usable variable.
Restore the previous behavior by copying the object first.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/615
Standard javascript now has Object.assign() which is very similar to
Params.parse(), except that the latter by default disallows "extra"
parameters. We can still leverage the standard API by simply
implementing the error check, and then call out to Object.assign()
for the actual parameter merging.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/612
Braces are optional for single-line arrow functions, but there's a
subtle difference:
Without braces, the expression is implicitly used as return value; with
braces, the function returns nothing unless there's an explicit return.
We currently reflect that in our style by only omitting braces when the
function is expected to have a return value, but that's not very obvious,
not an important differentiation to make, and not easy to express in an
automatic rule.
So just omit braces consistently as mandated by gjs' coding style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
While we have some style inconsistencies - mostly regarding split lines,
i.e. aligning to the first arguments vs. a four-space indent - there are
a couple of places where the spacing is simply wrong. Fix those.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent on whether case labels share the same
indentation level as the corresponding switch statement or not. gjs
goes with the default of no additional indentation, so go along with
that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
Starting an object literal with a comment throws off eslint's rules
for brace style (newline between brace and properties for both opening
and closing brace or neither) as well as indentation (fixed four-space
indent or align with the previous argument).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
Using multiple spaces after property names in order to align the
values isn't something we do elsewhere.
Instead, align the values by using a fixed 4-space indent as preferred
by gjs nowadays.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
The current code is carefully avoiding an overly wide line length as
well as adding literal new lines to the string due to indentation. It's
clever and barely legible.
Instead, use one string per line similar to how they appear in the actual
output, and join them together when setting the clipboard text.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
When destructuring multiple return values, we often use trailing commas
to indicate that there are additional elements that we are ignoring.
There isn't anything inherently wrong with that, but it's a style that's
too confusing for eslint - on the one hand we require a space after a
comma, on the other hand we require no space before closing brackets.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
We are currently inconsistent with whether or not to put a space
after catch clauses. While the predominant style is to omit it,
that's inconsistent with the style we use for any other statement.
There's not really a good reason to stick with it, so switch to
the style gjs/eslint default to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
While allowed by the syntax, they are problematic because the
variable is in the scope of the switch() statement, but only
valid if a particular case clause is reached.
Add braces to limit the variables' scope to the corresponding
case clause to avoid that problem.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
Converting a variable to a particular type can be done explicitly (with
functions like Number() or toString()) or implicitly by relying on type
coercion (like concatenating a variable to the empty string to force
a string, or multiplying it with 1 to force a number).
As those tend to be less readable and clear, they are best avoided. So
replace the cases of string coercion we use with template strings, and
clarify the places that can be confused with number coercion.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
We can use that newer method where we don't care about the actual position
of an element inside the array.
(Array.includes() and Array.indexOf() do behave differently in edge cases,
for example in the handling of NaN, but those don't matter to us)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/152
Control flow statements like return, break or continue are considered
unsafe in finally blocks, as they take precendence over any control
flow statement in the try and catch blocks, which may be unexpected.
This isn't the case here as the statement in the finally block is the
only one, but we can just as well avoid the finally block altogether
and use a regular return statement.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/606
This vfunc override has been introduced to ensure app icons are always
squared, but since the container of the AppIcon gets a square allocation
anyway if the 'square' property of the SwitcherButton is set, there's
no need to return a special width here.
Without the override we can also stop setting the size of the iconBin
manually. And since shell_app_create_icon_texture() uses logical pixels
but clutter_actor_set_size() uses screen pixels, that means we now no
longer set the size of the icon back to the unscaled value after it was
already correct.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1325
We're calculating icon sizes for the alt tab switcher early and at a
point where the style attributes of this._list are not loaded yet. To
make sure the value of this._list.spacing is correct, call
ensure_style() on this._list before accessing the spacing.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/587
The polkit password dialog has a spinner that gets displayed
while the users password is being verified.
Unfortunately, the spinner stop method unintentionally calls
back into itself after the stop fade out animation is complete.
The stop method is called at startup, so the looping begins as
soon as the dialog is visible and continues until the dialog is
dismissed.
This commit fixes the loop by having the stop method cease
calling itself, and instead having it call the stop method on the
superclass.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/602
The polkit password dialog has a spinner that gets displayed
while the users password is being verified.
Unfortunately, the spinner stop method unintentionally calls
back into itself after the stop fade out animation is complete.
The stop method is called at startup, so the looping begins as
soon as the dialog is visible and continues until the dialog is
dismissed.
This commit fixes the loop by having the stop method cease
calling itself, and instead having it call the stop method on the
superclass.
While the confirmation dialog for extension installation is simpler
than - say - authentication dialogs, it still makes sense to re-use
the common content layout instead of duplicating it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/600
Using one variable to initialize all gestures will update the address of
the "gesture" pointer with every newly initialized object. This means
that event handlers which also use the "gesture" pointer like the
'keyboard-visible-changed' handler will update a different gesture as
soon as the pointer is changed.
This lead to a bug where the handler of 'keyboard-visible-changed'
wrongly nabled the unfullscreen gesture. Fix that by assigning each
gesture its own variable.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/598
In practice this has been seen to fail:
JS ERROR: TypeError: active.get_devices(...)[0] is undefined
ensureActiveConnectionProps@resource:///org/gnome/shell/ui/status/network.js:73:22
_getMainConnection@resource:///org/gnome/shell/ui/status/network.js:1791:13
_syncMainConnection@resource:///org/gnome/shell/ui/status/network.js:1809:32
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1406
Since commit 520cea9394, the opacity of icon grid children is used
both to skip children outside the current viewport and to hide the
real icons while animating icon clones.
As a result, a grid animation during an animation now ends up showing the
icons that are being animated. Avoid that glitch by leaving children's
opacity alone when there's an ongoing animation.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/582
AllView's adaptToSize is called as part of viewStack allocation vfunc, and this
makes the adjustment value to be reset while relayouting.
So, fix this by delaying this using the Meta later that we already had for
pageIndicators operations.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1392
Since the repositioning is now done during allocation, we can just queue
a relayout when setting the boxpointer positioning via the source actor.
As per this _relayout() and _updateFlip now needs to be called during allocation
only and with an allocation box set.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/576
Changing the arrow side might need to reposition the boxpointer, however
if this happens during allocation, we don't need to trigger a new relayout since
we'd set the new allocation once _updateFlip's _reposition call is terminated,
otherwise if the position has changed, changing the boxpointer coordinates
will trigger a relayout anyways.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/576
As per commit 044572cb60 boxpointer uses its own coordinates to position itself.
However this would lead to warning when mutter-clutter is compiled with debug
options as we'd might try to set the box coordinates during the allocation
cycle.
So, when calling _reposition during allocation, instead of setting the actor's
coordinates we just pass the allocation box and we adjust its origin, in order
to set it properly in the vfunc.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1382https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/576
Hiding a child implies a parent reallocation, and IconGrid does it for the
children that doesn't fit in the available space, but this could lead to an
allocation recursion cycle. This has been introduced by commit 0e0574a0 to
reduce CPU usage not to using JS vfuncs.
To avoid this, toggle the children opacity instead so that we can achieve the
same visibility result, without any reallocation need.
In this way we also fix the case where hidden children can be shown again,
as _getVisibleChildren doesn't filter-out transparent ones, restoring the
pre-commit 0e0574a0 behavior.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1336https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Background is monitoring the whole `org.gnome.desktop.background` gsettings keys
for changes connecting to the non-specialized 'changed' signal and re-emitting
this as-is.
This means that when the background is changed via control-center, we get
multiple 'changed' signal events from GSettings, and for each one of this we
recreate a Background and a BackgroundActor.
Avoid this by using an idle to delay the emission of the 'changed' signal
grouping the events.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/558
The same Meta.Background could be used by multiple instances of background
actors, and so should not be disposed when the actor using it is destroyed.
Instead of calling `run_dispose` directly on it, just nullify the reference
on destroy method, leaving the job of doing the proper disposition to the
gabage collector that keeps the proper reference count on the Meta.Background.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/501https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/558
Adds the UI part for the pointer accessibility features.
The various timeouts running are notified using a pie-timer showing
under the pointer.
For dwell-click type selection, we use a drop-down menu. Users can
use the dwell-click to select the next type of dwell click to be
emitted.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/474
Starting from commit 7bb84dae, GrabHelper requires the owner to be an Actor as
we pass this to pushModal that assumes it to be as well.
So check that GrabHelper owner is an actor and throws an error if it is not the
case. This helps in tracking down issues such as gnome-shell-extensions!68
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/565
The `switch-to-application-n` shortcuts are essentially "launch the nth
app in the dash" actions, so they are at the very least confusing when
the dash isn't available because the overview itself is disabled (for
example in initial-setup mode).
So disable the shortcuts when the overview is disabled, but delegate the
decision to a separate function so that extensions like 'panel-favorites'
which expose favorites by some other means can easily re-enable them.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1333
A menu item activation might lead to a call to `itemActivated` which eventually
will close the menu which leads to a `PopupMenu.removeAll` that destroys all the
items, stopping the emission of the 'activate' signal for them.
Before commit 4258ae3e this was not happening because destroy'ing a javascript
object wasn't really disposing it and thus stopping the signal emissions.
So, ensure that `itemActivated` is called after that all the other callbacks
have been consumed, and so that the menu is closed as last thing.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1326https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/557
Upon construction of the CDMA modem proxy, _reloadCdmaOperatorName()
is called and the value of the Sid property is read.
That property is defined as UINT32 in the D-Bus interface, but the
value may not be loaded yet after the proxy is constructed, in which
case its value will be null.
In _findProviderForSid(), we'll end up calling lookup_cdma_sid(null)
which fails with the following assertion:
gnome-shell[1082]: nma_mobile_providers_database_lookup_cdma_sid: assertion 'sid > 0' failed
This commit changes the (sid == 0) check in _findProviderForSid()
to (!sid) which will also catch the null case.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
The 'destroy' signal is emitted at the end of the destroy() method.
However the implementation of destroy() can end up emitting one of the
signals we connect to on the window, causing us to re-enter destroy
from its callback.
That will in turn lead to some objects getting disposed twice, which
produces a stack trace like the following one.
This commit fixes the issue by overriding the destroy() method instead
of connecting to the signal, which allows us to disconnect the signal
handlers from the window at an earlier time and avoid re-entrancy.
--
gnome-shell[1082]: Object Gio.Settings (0x7f0af8143f00), has been already deallocated — impossible to access it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs.
org.gnome.Shell.desktop[1082]: == Stack trace for context 0x5627f7d1e220 ==
org.gnome.Shell.desktop[1082]: #0 5627f9e801a8 i resource:///org/gnome/shell/ui/messageTray.js:238 (7f0aefa9eca0 @ 22)
org.gnome.Shell.desktop[1082]: #1 5627f9e80108 i resource:///org/gnome/shell/ui/messageTray.js:802 (7f0aefaa2ee0 @ 28)
org.gnome.Shell.desktop[1082]: #2 5627f9e80070 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:79 (7f0aef7b29d0 @ 62)
org.gnome.Shell.desktop[1082]: #3 7fffa69fbfc0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #4 5627f9e7ffe0 i resource:///org/gnome/shell/ui/messageTray.js:121 (7f0aefa9e1f0 @ 71)
org.gnome.Shell.desktop[1082]: #5 5627f9e7ff38 i resource:///org/gnome/shell/ui/messageTray.js:1408 (7f0aefaa58b0 @ 22)
org.gnome.Shell.desktop[1082]: #6 5627f9e7fe80 i resource:///org/gnome/shell/ui/messageTray.js:1237 (7f0aefaa51f0 @ 729)
org.gnome.Shell.desktop[1082]: #7 5627f9e7fde8 i resource:///org/gnome/shell/ui/messageTray.js:1055 (7f0aefaa3d30 @ 124)
org.gnome.Shell.desktop[1082]: #8 7fffa69ff8e0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #9 7fffa69ff9d0 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #10 5627f9e7fd58 i resource:///org/gnome/shell/ui/messageTray.js:479 (7f0aefaa0940 @ 50)
org.gnome.Shell.desktop[1082]: #11 5627f9e7fcb8 i resource:///org/gnome/shell/ui/messageTray.js:808 (7f0aefaa2ee0 @ 99)
org.gnome.Shell.desktop[1082]: #12 5627f9e7fc28 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:69 (7f0aef7b28b0 @ 13)
org.gnome.Shell.desktop[1082]: #13 5627f9e7fb80 i resource:///org/gnome/shell/ui/main.js:566 (7f0aefcd8820 @ 216)
org.gnome.Shell.desktop[1082]: #14 5627f9e7fad0 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:103 (7f0aef7b2c10 @ 27)
org.gnome.Shell.desktop[1082]: #15 5627f9e7fa58 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:43 (7f0aef7b2700 @ 17)
org.gnome.Shell.desktop[1082]: #16 7fffa6a03350 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #17 5627f9e7f9d0 i resource:///org/gnome/shell/ui/messageTray.js:471 (7f0aefaa08b0 @ 22)
org.gnome.Shell.desktop[1082]: #18 5627f9e7f950 i resource:///org/gnome/shell/ui/calendar.js:752 (7f0aefaabdc0 @ 22)
org.gnome.Shell.desktop[1082]: #19 7fffa6a048f0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: == Stack trace for context 0x5627f7d1e220 ==
org.gnome.Shell.desktop[1082]: #0 5627f9e801a8 i resource:///org/gnome/shell/ui/messageTray.js:239 (7f0aefa9eca0 @ 42)
org.gnome.Shell.desktop[1082]: #1 5627f9e80108 i resource:///org/gnome/shell/ui/messageTray.js:802 (7f0aefaa2ee0 @ 28)
org.gnome.Shell.desktop[1082]: #2 5627f9e80070 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:79 (7f0aef7b29d0 @ 62)
org.gnome.Shell.desktop[1082]: #3 7fffa69fbfc0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #4 5627f9e7ffe0 i resource:///org/gnome/shell/ui/messageTray.js:121 (7f0aefa9e1f0 @ 71)
org.gnome.Shell.desktop[1082]: #5 5627f9e7ff38 i resource:///org/gnome/shell/ui/messageTray.js:1408 (7f0aefaa58b0 @ 22)
org.gnome.Shell.desktop[1082]: #6 5627f9e7fe80 i resource:///org/gnome/shell/ui/messageTray.js:1237 (7f0aefaa51f0 @ 729)
org.gnome.Shell.desktop[1082]: #7 5627f9e7fde8 i resource:///org/gnome/shell/ui/messageTray.js:1055 (7f0aefaa3d30 @ 124)
org.gnome.Shell.desktop[1082]: #8 7fffa69ff8e0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #9 7fffa69ff9d0 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #10 5627f9e7fd58 i resource:///org/gnome/shell/ui/messageTray.js:479 (7f0aefaa0940 @ 50)
org.gnome.Shell.desktop[1082]: #11 5627f9e7fcb8 i resource:///org/gnome/shell/ui/messageTray.js:808 (7f0aefaa2ee0 @ 99)
org.gnome.Shell.desktop[1082]: #12 5627f9e7fc28 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:69 (7f0aef7b28b0 @ 13)
org.gnome.Shell.desktop[1082]: #13 5627f9e7fb80 i resource:///org/gnome/shell/ui/main.js:566 (7f0aefcd8820 @ 216)
org.gnome.Shell.desktop[1082]: #14 5627f9e7fad0 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:103 (7f0aef7b2c10 @ 27)
org.gnome.Shell.desktop[1082]: #15 5627f9e7fa58 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:43 (7f0aef7b2700 @ 17)
org.gnome.Shell.desktop[1082]: #16 7fffa6a03350 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #17 5627f9e7f9d0 i resource:///org/gnome/shell/ui/messageTray.js:471 (7f0aefaa08b0 @ 22)
org.gnome.Shell.desktop[1082]: #18 5627f9e7f950 i resource:///org/gnome/shell/ui/calendar.js:752 (7f0aefaabdc0 @ 22)
org.gnome.Shell.desktop[1082]: #19 7fffa6a048f0 b self-hosted:979 (7f0aefa515e0 @ 440)
gnome-shell[1082]: g_object_run_dispose: assertion 'G_IS_OBJECT (object)' failed
gnome-shell[1082]: Object Gio.Settings (0x7f0af8161750), has been already deallocated — impossible to access it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs.
gnome-shell[1082]: g_object_run_dispose: assertion 'G_IS_OBJECT (object)' failed
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
Make the dialog a widget itself, removing the `_group` property used for
handling the actor.
Update all the inherited classes to be also GObject implementations, moving all
the signals to proper object ones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/55
Since version 1.50.0, gjs defines GObject.NotImplementedError for throwing
errors when a "virtual" method that requires a subclass implementation is not
defined.
So use this instead of a generic JS Error in such cases.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/549
This extends the ShellMountPasswordDialog by widgets which allow
specifying parameters supported by TrueCrypt and VeraCrypt compatible
volumes (TCRYPT). This includes:
- Whether the volume to be unlocked is hidden.
- Whether the volume to be unlocked is a system partition.
Note: TrueCrypt and VeraCrypt only support encrypting Windows
systems [1], so the label for this option is "Windows System Volume".
- Whether to use a PIM [2].
- Whether to use keyfiles. Unfortunately, GMountOperation doesn't
support TCRYPT keyfiles, so if this checkbox is checked, we tell the
user that they should unlock the volume with Disks, which supports
unlocking TCRYPT volumes with keyfiles.
[1] https://www.veracrypt.fr/en/System%20Encryption.html
[2] https://www.veracrypt.fr/en/Header%20Key%20Derivation.htmlhttps://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/126
App IDs in gnome-shell don't match AppStream, Flatpak or Snap IDs. For the
desktop portal, the latter two are more relevant, so include it in the
returned information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1289
The top_window_group is used for windows like popup menus, which should
appear above shell chrome like the panel.
Since we want important actors such as the screen keyboard or modal
dialogs to be shown above those windows, add their actors after adding
global.top_window_group to this.uiGroup and provide a new function
addTopChrome() to add important chrome above the top_window_group.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/917https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/358
Don't use composition for PopupBaseMenuItem, but instead inherit from BoxLayout.
So remove the internal actor, making all the menu items actor themselves.
Add an actor property as fallback to avoid warnings for usage in menus.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/499
Our search for system actions is currently inconsistent with searching
for applications: While we match terms anywhere within keywords, GIO
will only match at the beginning of words.
In order to get the same behavior, split keywords into single words
and only match terms at the beginning of a word.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/745
gjs now supports an optional GTypeFlags value for GObject subclasses
defined with GObject.registerClass(), so it is not possible to define
abstract classes on the gobject-level, just like from C.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/517
When toggling keyboard various times, we might get an error because trying to
disconnect an idle that isn't set anymore.
This is because when we remove the idle, we don't unset the ID.
Also clear the idle when destroying the keyboard.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/540
The current page is going to be destroyed as part of _onKeyboardGroupsChanged
cleanup, however we don't unset its pointer, and thus we'd might try to call a
function using an invalidated pointer.
So, unset the this._current_page reference when its get destroyed, connecting
to destroy signal when setting it and disconnecting when changing page.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1281https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/540
The interface name when a device is added may not be the final one. For
example when using USB tethering, it will first appear as 'usb0' before
being renamed to something like 'enp0s20f0u1' depending on the port the
phone is plugged in.
As a result, we will ignore the new interface name in that case and fail
to associate the correct connection with the device: Instead of the
correct "USB Ethernet" (or user-customized name), it will show up as
"Ethernet".
Fix this by updating names and connections when a device's interface
property changes.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/534
This makes it possible to drag a window which appears connected with the
panel, even if it is not in focus. As a result, it should be easier to
manipulate side-by-side windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679290
To prevent a small gap between windows in the workspace switching
animation, we temporarily shift windows up or down by the height of the
panel. This obviously breaks the animation for fullscreen windows, those
will overlap with the ones on the other workspace since there is no
panel shown in that case.
Fix this by checking whether the old or new workspace includes a
fullscreen window and don't shift the windows if there is one.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/757https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/322
Dialog's subtitle or body could not be properly wrapped, while it's ellipsized
when the text's width doesn't exceed the container size.
Clutter text has an `ellipsize` property, however in dialog's subtitle and body
we have been setting the `ellipsize-mode` property to Pango.EllipsizeMode.NONE
that is not present in the underlying GObject.
Not being an error in javascript, gjs didn't warn us about this, while at the
same time the St.Label's default Pango.EllipsizeMode.END was used.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/922https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/531
If an actor's allocation is outdated, clutter_actor_get_allocation_box()
will queue a relayout. That's why it's advised to not use the function
unless the allocation is known to be valid (namely during paint), but
in particular not from within get_preferred_width/height vfuncs.
Using the :allocation property (which may be outdated) would be better,
but in this case we can simply delegate the request to the correct actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1065
We were cleaning up self._groups, but the actors for all previous
groups/layers/modes would remain attached to the aspect container,
simply hidden.
Under some circumstances this can really make the amount of actors
in the shell stage to quickly ramp up, it's not just a "leak" but
also has potential side effects on performance.
We should destroy all child actors of this._aspectContainer, except
the static ones (emoji and keypad).
While at it, fix this._groups re-initialization, as it's actually an
object, not an array.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/523
Closes?: https://gitlab.gnome.org/GNOME/mutter/issues/556
We currently assume that every location has an associated timezone.
While this is sound in the real world, in practise it depends on
whether or not libgweather can find a corresponding timezone DB
entry.
This used to be a fringe case, but has become more likely when commit
https://gitlab.gnome.org/GNOME/libgweather/commit/d7682676ac9 moved
weather stations from cities to countries - the station itself is un-
likely to have a timezone entry, and the country may be part of more
than a single timezone.
It would be good for libgweather to return a timezone for those
locations again, but we should defend against the case anyway.
We cannot tell what time it is at a particular location without
knowing the timezone, so simply filter them out.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1062
The top bar handles allocating all its children itself, so there's
little value in chaining up to st_widget_allocate() and get the
default layout manager allocating all children again (and possibly
differently).
If this happens, we end up with an infinite allocation cycle with
corresponding performance penalty. Fix this by just doing and what
Shell.GenericContainer did before commit 286ffbe2b6 replaced it,
and not chain up to StWidget.
Thanks to Robert Mader for debugging the issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1054
On one hand, we were using a path instead of an URI on
rsvg_handle_set_base_uri(). This broke at some point in librsvg
(presumably for the best, handling paths there sounds non-standard)
leaving a blank svg (As the base image wouldn't be accessed).
On the other hand, we use this with the deprecated rsvg_handle_write()
which we should drift away from.
Using rsvg_handle_new_from_stream_sync() neatly solves both. We use
newer API based on input streams and GFiles, and it internally does
the right thing, bringing the pad OSD back to life.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1220
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Unlike regular keys that generate key events from a virtual device,
emoji keys rely on the input method to insert the character. However
as the compositor cannot inject IM events into ibus, this only works
in the shell's own entries on X11.
We shouldn't expose mostly broken functionality to the user, so limit
the feature to the wayland session.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1172
Move the signal handlers for changed settings to be connected after the
creation of the menu items to make sure a reference to the item is set.
While it also worked fine before, this solution certainly looks cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/512
At the point it is disabled, it has got signal handlers connected but
this._workspacesView is uninitialized. This triggers:
(gnome-shell:3993): Gjs-WARNING **: 18:49:53.281: JS ERROR: Exception in callback for signal: cancel: TypeError: this._workspacesViews is undefined
_endTouchGesture@resource:///org/gnome/shell/ui/workspacesView.js:527:25
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
set enabled@resource:///org/gnome/shell/ui/windowManager.js:478:13
WorkspacesDisplay<@resource:///org/gnome/shell/ui/workspacesView.js:482:9
ViewSelector<@resource:///org/gnome/shell/ui/viewSelector.js:167:35
ControlsManager<@resource:///org/gnome/shell/ui/overviewControls.js:405:29
init@resource:///org/gnome/shell/ui/overview.js:234:26
_initializeUI@resource:///org/gnome/shell/ui/main.js:184:5
start@resource:///org/gnome/shell/ui/main.js:124:5
@<main>:1:31
On startup. Shuffling these two lines prevent this from happening.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/506
The port away from the old Shell.GenericContainer actor turned many JS
classes with a corresponding actor property into Clutter.Actor subclasses.
For compatibility reasons, those properties were kept around for a while.
They were now removed and any code that still uses them should be adjusted.
Facilitate that transition by defining the compatibility property on
Clutter.Actor itself, but log a warning every time it is accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/487
It may not be immediately obvious that the windows section is a
list of open application windows, as titles like "Downloads" can
easily be confused with an action. Add a section heading to avoid
confusion.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/968
We currently copy the app icon menu behavior, which puts a separator
between windows from the current workspace and windows from any other
workspace. It is more useful to have the windows section appear as a
clearly marked group, so drop the separator.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/968
Work around a known regression from [1] that caused the volume bar in
the OSD window to never be hidden, even if the volume is set to 0. This
happened because the border radius of the barLevel is always drawn
without ensuring that the actual bar is visible.
So simply check if the value to draw is 0, and if it is, don't draw the
border radius of the bar at all. This will still result in incorrect
representation of values that have a width smaller than 2*border-radius,
but at least the bar looks right for a width of 0 now.
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/2https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/384
If a window gets destroyed right before it's resize
animation starts the user can get confronted with an undead
zombie clone that doesn't go away.
This commit makes sure said clones get reaped with their
actors.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1166
When determining the biggest icon size that fits the available height,
we first subtract the additional space requirements of icons (spacing,
padding, running indicator etc.) and then divide the result by the
number of icons to get the maximum size available to each icon texture.
In the above, the additional space requirement of each icon is taken
from the first icon (as all icons are assumed to be the same), and
calculated as the difference between the icon button's preferred height
and the currently used icon size.
To make sure that the icon is actually using the dash's current icon
size (even while animating to a new icon size), we enforce its height
during the size request and restore its original height afterwards.
However after some recent changes, that step is causing troubles:
For some reason, the original height may be 0, and when we restore it,
we end up forcing a fixed non-height that bypasses the regular size
request machinery.
While it is unclear where exactly the zero height comes from (maybe
waiting for a valid resource scale?), it is clear that it's best
to avoid forcing a fixed height. So instead of making the icon
texture comply with the assumed icon size, adjust the calculations
to use its current height request.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1053
We recently added offsets to world clocks that represent the location's
timezone as UTC offset. However for most users, that representation is
overly technical and less helpful than the difference to their local time.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1157
We currently use the city name for all location except named timezones.
However locations only have a city name if they are of level CITY or
DETACHED, or if they are of level WEATHER_STATION with a parent of level
CITY.
So when libgweather commit d7682676ac9 moved weather station locations from
cities to countries, it broke their names in the world clocks section.
To fix this, stop making assumptions about when we can use the city name
and simply try it first for all locations and fall back to the plain name
if its not available.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1150
After the Adwaita refresh, the button shows up oval rather than
circular. To address this, make sure that the "image-button" class
is applied as well by using the dedicated setter function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/482
Compute the source actor workarea and allocation when repositioning and keep it
cached so that we've not to calculating it again in _calculateArrowSide.
Since _calculateArrowSide only is called inside _updateFlip that is always
called just after reposition, we can be sure that the computed values are still
correct.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/435
Currently all the widgets using BoxPointer and so popup actors are always drawn
at screen origin and then shifted at paint time in the proper position.
This doesn't work when using resource scale, since the widgets need to know
in which monitor they currently are in order to use properly scaled resources.
So, basically revert commit 22c22e0d7 and go back using the actual actor
coordinates for positioning and the actor translation for animating it, as the
relayouting issues of the past seem to be gone now.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1008https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/435
Inserting a workspace is implemented by appending a new workspace, then
shifting all windows after the "new" workspace up. This has an unintended
side effect on sticky windows, as changing its workspace will unstick it.
Fix this by excluding sticky windows - there's little point in moving them
anyway, given that they should be on all workspaces (including the original
workspace and the target one).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1151
The monitor index is not something that gnome-shell and
gnome-settings-daemon seem to be agreeing about. Using the connector
string is a much more reliable method of identifying a specific screen
and we are indeed using this already for monitor labling.
So switch over to use the connector rather than the monitor index. If a
user tries to use the old API, then the OSD will simply show up on all
monitors (which is the status quo currently anyway).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/489
This API has been broken for quite some time now as the corresponding
mutter function meta_monitor_manager_get_monitor_for_output was removed.
If anyone tries to use it, we would just run into a backtrace.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/490
Selecting a screen area for a screenshot isn't the same as selecting
items in an icon view, so there's no strong rationale for picking
up the style from GTK. We stopped doing that for other elements like
tile previews long ago, so just use our own style here too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/481
Now that the existing touch/touchpad gestures in windowManager only
handle normal mode, add corresponding gestures for the overview and
hook them up to the existing workspace scroll animations.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
The window group is hidden while in overview, so the stick-to-content
animation isn't visible either. Worse, the gestures messes up the
position of window actors in that case. Just limit the gesture to
normal mode for now, we will soon add it back in the overview with
its own animation handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
The touch/touchpad gestures to switch workspace currently hard-code
the modes in which we want the gestures to work. While these modes
are correct, the existing switch animation only works in NORMAL mode,
not in the overview where the window group is hidden. The easiest way
to address this is to handle both cases completely separately, namely
use separate actions in- and outside the overview.
Make the existing usable in that way by making the list of allowed
modes a constructor parameter.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
Our weather integration is supposed to follow GNOME Weather's settings,
including its permission to use location services. However there's a
discrepancy in case xdg-desktop-portal is unavailable:
While our geoclue agent grants all applications access to location
services in that case, the weather integration treats it as if
access was denied.
Fix this by handling this case explicitly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1130
The same code for reading the current magnifier state is repeated in both
shell-recorder, shell-screenshot and magnifier itself.
So to move this inside a property of st-settings so that we can refer to it
all over the places removing duplications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/473
There's no point in keeping the cursor sprite texture around all the time,
and to listen for its changes, we just need this when the magnifier is active.
So, initialize the magnifier texture and monitor for the sprite changes on
activation, while disconnect from the signal and nullify the texture when
the magnifier is deactivated.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/443
In order to paint all the color channels of the content texture we need to
set the color channels to 255, so instead of doing this manually we can just
reuse the static color definition for white.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1020
ClutterContent's get_preferred_size should return a boolean weather the
preferred size is valid, so in javascript we've to return this state value
before out width and height.
Since this was not happening, clutter was considering the width as the state
(converting the non-zero value to true), the height as the width, while ignoring
the returned height (that was then defaulted to 0)
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1020
The default ZoomRegion is created at startup and only updated if it is active
when the monitor setup changes. Thus when reactivating the magnifier after a
display change, the viewport used is still the one that been computed with the
old screen geometry values.
Move screen update code inside a function and call it both when activating
the zoom region and when the monitor changes during a zoom session.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1120
NetworkManager added support for a new device - NMDeviceWifiP2P - but
did not add the corresponding enum value in NMDeviceType. The return
value for nm_device_get_device_type() is therefore "illegal" for the
newly added device, and gjs throws an exception.
This should ultimately be fixed in libnm, but as errors when adding
one device shouldn't interfere with adding any other devices, catching
exception is a good idea anyway, so do just that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1023
The current scripting module makes heavy use of pre-standardized
iterator/generator/promise APIs, at least for some of those support
was pulled in SpiderMonkey 58.
Port to the new standardized replacements to get the module back into
a working state.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/440
Commit 1b169655ac removed the system indicator from the list of children
that are considered for the overall menu width, because we do want the
log-out submenu to adapt to the available width.
However as a side effect, action buttons no longer contribute to the
width either, so if extensions add additional buttons, the menu is
likely to overflow.
Avoid this by only adding the button group to the list of size children.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1094
This call just went through stomping over previous drag operations if any,
_maybeStartDrag() accounted for this, but other callers (well, WindowClone
in workspace.js) don't. This must bail out early even if a drag operation is
requested, luckily all callers account for it already.
This broke shell state by preserving connected captured-event handlers if
one tried to drag multiple windows simultaneously through multitouch. We
of course don't support that, now more elegantly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/455
The bind constraint that replaced the Shell.GenericContainer in commit
f4682748fa is subtly different from the previous code:
It forces the actor to have the same size as the stage, rather than just
requesting that size.
This breaks the magnifier which relies on the UI being able to be bigger
than the display size. Fix by going back to using a custom actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/646
The texture cache now returns an actor with an appropriate ClutterContent
rather than a ClutterTexture. That actor uses the CONTENT_SIZE request
mode, which means that it will unconditionally request the preferred size
of the content. That is, setting an explicit size no longer has an effect.
Fix this by making sure the image is already loaded with the desired
dimensions.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1024
It is convenient for the OSK so it eg. doesn't appear centered in the
available space (eg. on very narrow portrait layouts), plus it will also
be convenient to align other AspectContainers to the same baseline.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/439
While it is possible to register accelerators in-bulk, there is no
proper way to unregister them again. This adds the corresponding call
for UngrabAccelerator to allow ungrabbing multiple accelerators at the
same time.
The idea is that g-s-d can use this in the future to simplify the
keybinding reload logic.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/429
Commit 8f15193b4 changed the `policy` property from a regular JS property to
a getter. This was necessary to avoid calling an overridden _createPolicy()
method before a subclass is properly initialized, but it broke the second
way of using notification sources:
Don't create a Source subclass, but use the base class directly and change
its `policy` property.
There's no good reason why we should no longer allow this, so add a setter.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/431
The dialog doesn't change the `destroyOnClose` property from its default,
so it is already destroyed automatically on close. So if we also destroy
it explicitly, we end up (rightfully) with one of gjs' infamous "invalid
access" warnings.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/430
Instead of just passing a scale when getting a cached icon, pass both a
'paint_scale', the scale of which the icon will be painted on the
stage, and a 'resource_scale', the scale of the resource used for
painting.
In effect, the texture size will use the scale 'paint_scale * resource_scale'
in a ceiled value while the size of the actor will use 'paint_scale' when
determining the size.
this would load a bigger texture, but the downscaling would keep the visual
quality.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5https://bugzilla.gnome.org/show_bug.cgi?id=765011
Ouch, this went unnoticed for a long time: As the minimum size of menu
items is generally small (because its label can be ellipsized), we are
requesting the unellipsized width of the last "size child" instead of
the widest one.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/996
Here's a template string with '/' that escaped commit 94423151b2,
resulting in an xgettext warning when generating the .pot file.
Simply move it into the resource like the other interface descriptions
to make xgettext happy again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/407
The top drag gesture is not of any use if the topmost window is not
a fullscreen window and will only block events near the important top
screen edge (i.e. the panel). To fix this, only enable this gesture if
the focus window is a fullscreen window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/552
If the user's real name is too long to fit the menu comfortably, we are
supposed to use the username instead. However since commit f8e5e3e435,
we no longer set a max-width on the menu as a whole, but instead base
the width request on only "unellipsizable" children. For some reason
the system menu ended up there, so the name is now allowed to grow
indefinitely.
Remove it from the list of size children to get the intended behavior
back.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/400
The menu grabs the key focus when opened, which takes focus away from
whichever actor triggered the keyboard. And as the menu doesn't have
any text entries, the keyboard is popped down as a result.
Prevent this by making the menu items unfocusable, so the keyboard
focus just stays where it is. Considering that the menu is part
of the on-screen keyboard itself, not being keyboard-navigatable
isn't a big deal here.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/171
Menu items use a single 'active' state that follows both hover and
keyboard focus. It therefore makes sense for the active item to always
grab the focus, in particular as an item that is sensitive but not
focusable by keynav would be rather weird.
As it turns out, we do have a case that is weird enough where we want
exactly that, so only grab focus if the actor's :can-focus property
allows it.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/171
Those functions originated in gnome-shell-extension's Convenience
module which is copied by almost every extension out there. Let's
make people's life just a little bit easier by including the code
ourselves.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/150
Window titles aren't restricted in length, so the menu may end up unwieldily
width. Commit 0bec76b6ee therefore limited the app context menus, but that
got accidentally dropped in commit 0ded0dbfd5. Add back the limitation and
extend it to the new app menu as well.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Top bar icons are supposed to by symbolic, but not all applications
provide a symbolic icon. Make the stick out less by desaturating
the appmenu icon if a symbolic style is requested.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
With the app menu being phased out entirely, there's no good reason to
keep support for the fallback app menu in decorations either - the number
of applications that set an app menu and haven't embraced client-side
decorations is extremely small, and they should already have alternative
fallbacks for non-GNOME environment in place.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Since the plans to retire the app menu were announced, nobody objected to
the removal of the menu content, however some concerns were raised about
the menu's secondary role as indicator.
Account for that by not removing the existing app menu, but replacing it
with a built-in menu similar to the existing app icon context menu.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
The GtkSettings was originally introduced to inform applications about
the desktop shell's capabilities, but users soon started to use it to
force GTK+ to show the app menu inside the application. We eventually
caved and also handled the setting ourselves to hide the in-shell app
menu to allow users to "move" it.
But now the remote app menu is in the process of being retired[0], and
will be replaced with a simple indicator that cannot be moved, so
stop following the GtkSetting.
[0] https://gitlab.gnome.org/GNOME/Initiatives/wikis/App-Menu-Retirementhttps://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Certain keybindings should continue to work even when a popup
menu is on screen. For instance, the keybinding for showing
the app menu and the keyinding for showing the calendar are
examples.
This is achieved by putting in place a special "POPUP" action
mode, whenever a popup menu is active. This mode replaces
the (e.g., "NORMAL" or "OVERVIEW") action mode that was in place
for as long as the popup menu is active.
But those keybindings should not work when the user is at the
unlock dialog (which uses an action mode of "UNLOCK").
Unfortunately, since commit c79d24b6 they do.
This commit addresses the problem by forcing the action mode
to NONE at the unlock screen when popups are visible.
CVE-2019-3820
Closes https://gitlab.gnome.org/GNOME/gnome-shell/issues/851
We shouldn't allow toggling menus that aren't supported by the
current session mode, but as indicators are hidden rather than
destroyed on mode switches, it is not enough to check for an
indicator's existence.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/851
This keyboard works similar to GTK+'s emoji chooser (actually, both pull
from the same JSON file). Emojis are categorized in sections and variants
and kept in a "model".
The EmojiPager actor then uses this model to generate pages on-the-fly as
the user swipes around. This is an important optimization since the amount
of actors would rival with the rest of the shell otherwise.
The EmojiSelection object puts the EmojiPager, the page indicators and
a KeyContainer with the bottom row of emoji section shortcuts together to
implement the emoji panel as a whole.
The Keyboard object hooked this to an "emoji" key, which is just visible
on the Clutter.InputContentPurpose where showing an emoji would be
meaningful. Otherwise the surrounding buttons are made a bit wider to
cover up for it (i.e. as it was before).
In order to cater for emoji panel usage, we want something like PageIndicators
except:
- It should have horizontal disposition
- It should not be animatable (?)
- It should not be reactive
Separated PageIndicators into a base, non-animated widget, and an
AnimatedPageIndicators that can be used on appDisplay.js. Reactiveness is
set through an extra method, and layout is set as a construct argument.
This will be useful as we want other panels (eg. emoji) to preserve aspect
ratio with the rest of the OSK. Separate the aspect ratio management logic
into this container that will be the parent of them all.
Since commit 447bf55e45 we turn the top bar translucent when
free-floating. While this looks fancy and reduces the appearance
of cutting into the available screen space, it has also had a
negative effect on legibility.
Nobody stepped up to address those issues in two years, so revert
back to the fully opaque top bar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/408
While the current textual forecast is non-intrusive, it may be too
much so, making it less effective to spot the current conditions
at a glance.
Refresh the section to use a more conventional graphical representation,
similar to the one used by gnome-weather itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/262
Having Unity-like shortcuts for activating the first nine applications
in the dash has been a long requested feature, but somehow nobody got
around to implement it.
As the shortcut is most useful outside the overview where the dash is
not visible, only consider favorite apps as they have a predictable
order.
https://bugzilla.gnome.org/show_bug.cgi?id=648000
Since the overlays we show on hover above the window clones are no
longer only a close button, but the window title, a border and a close
button, rename a few variables so it's easier to understand what they're
for.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/346
Currently when a preference widget fails to load, we throw a raw
backtrace at the user. While that is undoubtedly useful information
for extension developers and bug reports, it is gibberish to most
users and hardly the first thing they should be exposed to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/193
In order to replace GTK+'s GtkDirectionType. It's bit-compatible with it,
too. All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
In order to replace GTK+'s GtkPolicyType. It's bit-compatible with it, too.
All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
This is actually papering over bugs in toolkits. On X11 the Xserver will
send crossing events when the stage input shape changes. As those go
end up ignored in GTK+, this warp call aims (and randomly manages) to send
a motion event that wouldn't go unlistened by the drag source window (the
one holding the grab).
This bug actually manifests in other ways, eg. by changing the window
beneath the pointer with alt-tab while DnDing. This should be fixed
altogether in the client side.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
This gdk_display_sync() call was added in commit a40daa3c22 so the alt-f2
dialog is able to spawn commands that trigger grabs on startup (eg. xmag/
xkill).
This seems worthwhile to do only on the X11 backend, and handling it in
mutter backend code seems cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
Allow notifications to set a x-gnome-privacy-scope hint, with values in
['system', 'user']. If all the notifications in a particular source hint
that their privacy scope is ‘system’, don’t hide the notification
details on the lock screen.
This is aimed at fixing the particular case of power notifications: they
contain information which is not private to the user (it relates to the
system: battery state or AC state, which is obvious to anyone who can
see the machine), so hiding the details of a power management
notification when the screen is locked is pointless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/issues/726
Most often it is a bug if the condition part of a for-loop contains the
assignment operator rather than the comparison one, so tools rightfully
emit a warning.
Clarify that the assignment is intentional in this case by adding
parentheses.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
Just like the "in" operator in the previous patch, "instanceof" has
a lower precedence than negation, resulting in the nonsense condition
of "true instanceof BaseIcon".
Add parentheses to get the intended behavior.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
The "in" operator has a lower precedence than negation, so we are
actually testing whether the favorites map contains "false".
Add parentheses to get the intended behavior.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
The Magnifier class uses a small subtree of actors to track the
current cursor's position and sprite. Specifically, it uses the
deprecated ClutterTexture to paint the cursor sprites.
Add a new, very simple ClutterContent implementation to track the
cursor sprite, and replace the ClutterTexture by a ClutterActor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/371
The last patch in the series, this one adapts StShadowHelper
to received a CoglFramebuffer. This is where we first touch
JavaScript with Cogl types, and as such, it depends on the
latest Mutter. Earlier versions of Mutter didn't have its
Mutter-Clutter GIR to generate types for various Cogl types.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
With the recent port to JS6 classes, the trailing
comma after functions in the syntax of classes has
been removed.
However commit c2961f21 accidentally reintroduces
one trailing comma after a newly created function,
leading into g-s throwing an exception and not
starting anymore.
Therefore, remove this trailing comma to solve
this problem.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/366
Besides the device grab on the drag device, also set up a captured-event
handler to catch other devices (except the keyboard) while the DnD
operation is ongoing. This makes DnD operations exclusive to others.
Also, disallow it in less aggressive ways if maybeStartDrag() gets called
while there is a current draggable.
This might definitely be nicer (eg. having other grabbed devices emit
leave/end events), but can't be done without major surgery to Clutter.
In the case where the draggable has an actor of its own, state could be
left broken when dragging on a place that would not accept the DnD op.
After button release, drag state is set to "cancelled" and the animation
begins. After the animation is finished, the drag actor would be destroyed
before disconnecting from its destroy handler.
Within the destroy handler, the grab would be undone but drag state would
be left on "cancelled" state for subsequent operations. This results in
DnD oddities and stuck grabs.
In order to fix this, double check in the actor destroy handler that we
are actually dragging before setting the "cancelled" state.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/540
Instead of fetching the CLUTTER_POINTER_DEVICE device. It will
be wrong if drags get initiated from tablet pointers. This allows
for DnD operations to be started, moved, and more importantly
finished through tablet devices.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/540
Whenever the AllView needs (re)populating, we used to do one general
g_app_info_get_all() to get all GAppInfo, plus one per app folder in order
to check the ones that fall within that category. This calls results in a
fair amount of I/O blocking the main loop.
In order to ease this, keep the GAppInfo list around in AllView, and make
the AppFolders use it when figuring out the contained apps. Since reloading
the AllView results in AppFolders regenerated from scratch, the app info
list is ensured to be up-to-date for any later change within the AppFolder
(eg. through the GSettings key changing).
As the list was already filtered in the first place, we can also remove
the try{}catch() in AppFolder in order to discard desktop files with
invalid encoding.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/832
When connecting to a Wi-Fi router that supports the WPS button method
(PBC, push button connection) the user can simply press the button on
the router. Show an explanation in the PSK prompt when this is
possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/329
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When using dynamic workspaces, it is possible to try to change to a
non-existent one if the user defines hotkeys for changing to desktop
1, 2, 3... This case is not detected, and gnome shell shows an error:
JS ERROR: TypeError: workspace is null
actionMoveWorkspace@resource:///org/gnome/shell/ui/windowManager.js:2130:13
wrapper@resource:///org/gnome/gjs/modules/_legacy.js:82:22
_showWorkspaceSwitcher@resource:///org/gnome/shell/ui/windowManager.js:2104:13
wrapper@resource:///org/gnome/gjs/modules/_legacy.js:82:22
This patch adds a check before trying to change the workspace, to avoid
switching to a non-existent one.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/365
When an InputSourceIndicator is destroyed, the InputSourceManager it was
connected to could (and probably will) outlive it (since the manager is
a singleton). If the InputSourceManager emits any subsequent signals,
the callbacks from the finalised InputSourceIndicator could be invoked,
and will reference finalised objects.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Otherwise the user object could outlive the dialogue, emit a subsequent
signal, and the callback from that signal could reference finalised
objects/widgets from the dialogue. The likely mechanism for the user
outliving the dialogue is caching of user objects within
libaccountsservice.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Rather than explicitly destroying the session after calling close(),
destroy it from the `closed` signal handler.
This also means we can make the method internal.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
In case there are any internal ways the dialogue can close itself
without calling its own close() method, it’s probably better to do all
our cleanup on a handler for the `closed` signal instead.
This should introduce no functional changes except ensuring the
polkitAgent cleanup is always done.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Otherwise the session could outlive the dialogue, emit a subsequent
signal, and its callback would reference finalised objects/widgets from
the dialogue. The PolkitSession object is implemented by
libpolkit-gobject, so we have no guarantees about its reference counting
— the session object could keep itself alive in another thread, or be a
singleton. In all likelihood, the session hangs around for longer than
the dialogue due to differences in when the two objects are garbage
collected.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
This avoids the following warning sometimes happening later:
JS WARNING: [resource:///org/gnome/shell/ui/search.js 701]: reference to undefined property "searchInProgress"
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
The built-in calendar isn't meant to replace a full-fledged calendar
app, which is why clearing event messages only hides the event in
gnome-shell rather than deleting the actual event. This has turned out
to not be overly useful and often confusing - it creates a discrepancy
with visible events in apps, isn't revertible in a non-obscure fashion
and non-obviously limited to the current date.
As we are considering moving events out of the message list and back to
the calendar, it looks like a good time to remove that ability and keep
notifications as the only removable messages.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/262
We currently deliberately avoid chaining up in derived policy
constructors to not override properties with their defaults.
That's a neat trick that will stop working when porting to ES6
classes, as chaining up is necessary to actually initialize the
object there (including "this").
Address this by turning all properties into (overridable) getters
that are backed by private properties by default.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/350
The _createPolicy() method of a subclass usually depends on some
constructor parameters that need to be set before chaining up to
the parent. This works fine with Lang.Class, but will break with
ES6 classes, as "this" is only initialized after chaining up.
Prepare for this by not creating the policy in the constructor,
but when it is first accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/350
Check via Polkit if the current user is actually allowed to enroll
devices before trying to do so. If not, show a notification that
explains that a system administrator needs to authorize the device.
Clicking on the notification will guide the user to the thunderbolt
control center panel. Before this patch, when the current user was
not allowed to enroll a device a polkit dialog would pop up which
is confusing because it did not contain any information why it was
shown. This patch implements the behavior as designed (see [1],
section "Multi-user environments").
[1] https://wiki.gnome.org/Design/Whiteboards/ThunderboltAccess
Since commit 5fb8d4f730, a NotificationMessage's notification property
is reset to null when the notification is destroyed. However at that
point we still have connected signal handlers around that we'll try
to disconnect later.
Avoid the warnings by disconnecting and resetting the handler IDs at
the same time as the notification.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/308
In contrast to generic animated icons, it is reasonable to expect
spinners to be invisible while inactive. Implement that behavior
in the new Spinner class and optionally animate the transitions.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/316
When `ibus restart` runs, InputMethod.enabled is changed to false
and no longer enable ibus but 'enabled' and 'disabled' signals
are not used in the current IBus clients and it's good to delete
the member simply.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/295
If the session mode doesn't allow access to Settings, the language
menu should respect that and not expose the "Region & Languages"
panel. Using the dedicated method instead of manually constructing
the menu item takes care of that and makes for less code.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/780
The picked target actor may be destroyed (e.g. hover style change
resulting in the ClutterTexture to be destroyed). If we don't handle
this, GJS will abort when it sees the exception caused by Javascript
code trying to access the destroyed target actor.
To handle it, listen on the 'destroy' signal on the target actor, and
repick, so a valid actor is passed to the next motion callback.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/632
When a fullscreen application is focused,
toggling the overview via hot-corner is disabled,
even when the overview is currently visible.
This only makes sense, when the overview is
hidden to not to disturb the behaviour of the
fullscreen application, but leaves an
inconsistency when the overview is visible since
it should work there like when a non-fullscreen-
application is focused.
So, always allow hiding the overview using the
hot corner when the overview is visible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/429
The `GetWindows` method gives access to the list of windows for each
application with some of their properties, so utilities such as dogtail
can pick the window of their choice to interfere with using the provided
window id.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
Add a D-Bus API that allows the API user to introspect the application
state of the shell. Currently the only exposed information is list of
running applications and which one is active (i.e. has focus).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
The intention of commit 4dc20398 was to disable unredirection while
banners are shown, but the ::done-displaying signal currently used for
re-enabling unredirection is only emitted under some circumstances, so
it's possible that unredirection is left disabled indefinitely, whoops.
Fix this by tying disabling unredirection explicitly to the lifetime
of the banner actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/799
The only reason for `vfunc_paint` and `vfunc_pick` existing was to
implement a culling optimization. Although that optimization actually
made performance worse than none at all because it forced the painting
and picking cycles to spend more time calling into JavaScript.
Turns out we don't have to choose between native code and culling though.
Just reimplement the culling using native ClutterActor functions and we
get the benefits of both.
Performance on an i7-7700:
Moving the cursor over the icon grid:
Before: 70% CPU, 5.5ms per frame
After : 60% CPU, 4.5ms per frame
Scrolling the icon grid:
Before: 60% CPU, 4.4ms per frame
After : 50% CPU, 3.3ms per frame
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/174
Destroy the DashItemContainer's child from the same handler as the tooltip. This
will prevent invalid reads when the item is destroyed while its quicklist is
still open.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/781
Since commit 551e827841, we don't always pass a callback parameter.
However passing it on as undefined to ibus doesn't work, as gjs doesn't
accept that as a valid callback value and throw an error. As a result,
we can end up with no layout selected in the keyboard menu and an "empty"
indicator. Fix this by explicitly passing null if no callback has been
provided.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/293
Back in the day, there was a proposed system of tracking apps in a
specific context.
The inspiration was that you may have used apps in multiple modes:
Firefox may have been used in both "Programmer Reference" and
"Kitten Videos" contexts. Early user response to the feedback wasn't
too positive - context switching is something that humans have trouble
doing implicitly, let alone explicitly. The old codebase still has a
few remnants of this around; let's finally put them to rest.
Note that we still write out a dummy context tag to the XML file - old
versions of the shell will flat out crash if you don't have one of those
in there, so just leave it in for compatibility sake.
https://bugzilla.gnome.org/show_bug.cgi?id=673767
The pending-charge state means AC power is on but the battery is not
being charged. This can happen because its charge is above a certain
threshold, to avoid short charging cycles and prolong the battery's
life, or because the PSU is not powerful enough to charge the batteries.
Instead of lying to the user about something being estimated, we should
simply tell the truth and set the label to "Not Charging".
Closes: #701.
When we started to only show a single caption at a time, we allowed
title captions to be wider than their corresponding window preview.
But while overlapping neighboring previews is fine, we shouldn't
allow the captions to leak outside the workspace area itself and
overlap unrelated elements like workspace switcher or dash.
This partly reverts commit b3b30f239d.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/214
Instead of defaulting to a natural scroll behavior,
have the workspace switch action use the natural-scroll setting
in org.gnome.peripherals.touchpad to determine the correct
direction of travel when swiping. 4 finger swipes will then
match the behavior of the rest of the UI.
Reference: https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
While this sounds counter-intuitive, the image-path hint value might also
be used with URIs or icon names.
As per freedesktop standard:
The "app_icon" parameter and "image-path" hint should be either an URI
(file:// is the only URI schema supported right now) or a name in a
freedesktop.org-compliant icon theme (not a GTK+ stock ID).
Thus the image-path hint should also be parsed as it happens for the
app_icon.
Reuse same logic, by falling back on _iconForNotificationData with the
hint value.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/285
We have a callback that will call close() when the notification is
destroyed, and a callback that will call destroy() on the notification
when the message is closed.
Currently, if the notification is destroyed we'll execute our callback
that will call again destroy() on the notification. That's bad
practice in general, and it also has the side effect of resetting the
destroy reason.
This commit avoids re-destroying the notification by dropping the
notification reference on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/258
Differently from the fd.o notifications, Gtk notifications do not
have a mechanism to update themselves. Instead, when a new
notification is received for an ID already known to the notification
daemon, the old notification is dismissed and a replaced with a new
one.
Currently though, there is no way to distinguish a notification that
was dismissed because of an user interaction, or because it was
replaced. That is an useful piece of information, so add a new value
to the NotificationDestroyedReason enum to account for it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/258
When gnome-shell receives the signal of 'set-content-type' from ibus,
gnome-shell calls KeyboardManager.holdKeyboard() and
KeyboardManager.releaseKeyboard() and the functions change the current
input focus in GNOME Xorg and it could result in closing a popup window
which has a password entry by focusing on the entry.
The solution is to stop to call the APIs on 'set-content-type' signal.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/391
We don't usually show notification banners while the monitor is in
fullscreen, but when we do - the notification is urgent - we should
actually show the banner, even if the top-most window is unredirected.
To achieve that, disable unredirection while the banner is showing.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/430
The `reactive` property of icon actors was being restored multiple times
over the course of the pulse animation, all at slightly different times
as each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a pulse animation, limiting its smoothness and performance.
The solution is to not toggle the `reactive` property in the pulse
animation at all, which avoids incurring multiple full stage relayouts.
As a bonus, this means the icon under the cursor pulses with the correct
selection highlight, appearing more seamless and responsive.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/261
The `reactive` property of icon actors was being restored 24 times over
the course of the spring animation, all at slightly different times as
each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a spring animation hogging the CPU and limiting the frame rate.
The solution is defer and batch the cleanup for all icons until after the
last icon has finished animating. This way the CPU impact of the style
change and stage relayout isn't felt during the animation so the frame
rate remains higher and smoother. The overall CPU usage of the animation
is also reduced as the remaining relayouts are much more likely to be
grouped into a single frame.
Icon spring animation performance on an i7-7700:
Before: 83% CPU and 47 FPS
After : 78% CPU and 54 FPS
which is about a 22% increase in performance per clock (FPS/CPU).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/253
The switcher popup is a large, mostly transparent actor that
should cover all the clickable area of GNOME Shell. In Clutter
terms, it should cover the whole stage.
By binding it to the primary monitor, the Alt+Tab behavior
becomes a bit inconsistent. For example, by not hiding when
clicking at empty spaces at other monitors.
Fix that by binding the SwitcherPopup to the whole stage,
and not only the primary monitor.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/647
If no password or a wrong password is entered after automounting an
encrypted device, then the password should be reasked. However, this
does not happen because the relevant udisks error messages for this
cases are missing in the exception handler that calls _reaskPassword.
Fix this issue by adding the relevant udisks error strings to the
exception handling in the _onVolumeMounted method.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/640
Fix a regression causing the portal helper to crash.
In 94423151b2 we moved the dbus interface
descriptions into seperate files which is why we had to include the
fileUtils js module. This module imports the params js module, so add
params.js to the gresources file for the portal helper.
We currently only ignore minimized windows, not windows that are
hidden for other reasons - namely on wayland windows are initially
hidden until they are placed.
This fixes a flicker in the transparent top bar on wayland when the
"position" of an unplaced window wrongly suggests the window is
overlapping the top bar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/693
Since we started to show OSD windows on all monitors, OSD windows are
destroyed when the corresponding monitor is disconnected. We shouldn't
leave any signal handlers around in that case - they prevent the object
from being garbage collected, and trigger warnings for accessing proper-
ties of invalidated GObjects.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/602
When maxLevel is > 100%, first OSD appearance was capping the current
level to 100%. Consecutives key press were then OK.
Ensure we setMaxLevel before setting Level itself, so that correct cap
value is applied.
App folder popups take a grab when opened, and as we don't pass any
particular pushModal() parameters, all keybindings are blocked. While
this makes sense for most keybindings that would interfere with the
popup interaction, others like volume/brightness keys or screenshots
can be allowed safely.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/648
Add exception to handle a keypress if numlock is enabled as we already do for
capslock. This uses Clutter.ModifierType.MOD2_MASK because at the moment there
is not a more explicit way to refer to the numlock mask.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/550
Instead of taking care of the PanelMenu.ButtonBox.container
destruction by itself, delegate that to the very object that
created it in the first place: PanelMenu.ButtonBox itself.
This is the last remaining usage of Shell.GenericContainer
in the codebase, and posed small challenges compared to the
other removals.
A new St.Widget subclass called InputSourceIndicatorContainer
was added as a replacement to the Shell.GenericContainer. It
was needed because GNOME Shell needs to override the regular
size allocation functions, but InputSourceIndicator already
is a St.Widget with its own size allocation overrides.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Because we're late in the cycle, and don't know how many
extensions actually rely on this API, this commit adds
back the BoxPointer.show() and .hide() functions, with
warning messages to notify consumers that this is going
to be removed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Pretty much like dd4709bb2, BoxPointer's show() and hide()
functions will clash with Clutter.Actor's ones.
In addition to that, on a conceptual level, the current API
is not great, because calling boxPointer.hide() won't result
in boxPointer.actor.visible == false.
For these reasons, rename show() and hide() to open() and
close(). A compatibility layer will be added in a following
commit, warning about the usage of show() and hide().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
LayoutManager is currently a pure JavaScript class that
relies on the rudimentary Signals.addSignalMethods() to
handle signals. This is an inefficient implementation of
one of the most central classes in GNOME Shell.
In addition to removing Shell.GenericContainer, then,
turn LayoutManager into a proper GObject.Object subclass.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
In the next commit, we will turn PanelMenu.ButtonBox into a
St.Widget subclass. As a domino effect, PanelMenu.Button will
become one too, and so will Panel.AppMenuButton.
When that happens, the current show() and hide() functions in
Panel.AppMenuButton will clash with Clutter.Actor's ones.
To avoid that, rename these functions to fadeIn() and fadeOut()
and avoid a name clash.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
This is another straight port from Shell.GenericContainer.
The important thing to notice is that the calculation is
broken if the StThemeNode helpers (adjust_preferred_* and
adjust_for_*) aren't used.
The downside of this patch is that it removed the skip_paint
from the thumbnails. Keeping it would add an unecessarily
large amount of code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Removing Shell.GenericContainer from the IconGrid class was
challenging because it needs the "skip paint" API from it.
This API was added, too, as a workaround to the inability
to override vfuncs from GJS.
The overrides are largely copy-pasted and translated versions
of the Shell.GenericContainer code.
The IconGrid:key-focus-in signal was renamed to :child-focused
to avoid clashing with ClutterActor:key-focus-in.
In GridSearchResults, the internal IconGrid had it's y_expand
set to false, so it doesn't push other search elements (the
list results mainly) to the bottom of the screen.
Because skip paint wasn't and still isn't a GObject property,
rename it to _skipPaint to reflect that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
As part of our quest to obsolete Shell.GenericContainer, IconGrid will
become a Clutter.Actor subclass. As the ::key-focus-in signal would
clash with Clutter.Actor::key-focus-in, rename it to ::child-focused.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
DashItemContainer currently animates the scale and opacity
of its child when zooming in. This is visible when adding
a new favorite item to the dash; the items will zoom in from
the center.
After the previous commit, however, the zoom animation got
slightly broken, and looked like the icon was coming from
the bottom instead of the center.
Fix that by setting the scale and opacity of DashItemContainer
itself, instead of its child. Remove the unused code after that
too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Pretty much like the previous patches, this extends St.Bin. The
most interesting aspect of this patch is that most of the sizing
routines of the icons is now delegated to the actors and layout
managers, removing quite a bunch of code.
The 'spacing' theme property is now redirected to StBoxLayout's
spacing property. Also adjust the Dash code to stop forcing a
potentially invalid width in the first icon too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
This commit removes all the uses of Shell.GenericContainer from
SwitcherPopup.SwitcherList. Compared to the other patches, this
one was specially trickier to get right, and a few invasive
changes needed to be done.
The most noticeable one is that the allocation of the items is
done entirely by St.BoxLayout -- we don't manually allocate them
anymore. To make it work, get_preferred_width() had to calculate
the correct value. It now assumes that:
* Minimum width: the minimum width of the widest child.
* Natural width: the minimum width of the StBoxLayout (use it
instead of the natural width to force the labels to ellipsize
when too long.)
The AppIcon class became a St.Widget subclass as well, to override
get_preferred_width() and be able to keep the squared shape.
Besides that, add a new SwitcherButton class to reimplement squared
icons without having to resort to hacks in the size allocation
machinery. This class has a single vfunc override to ensure that it
is squared when the SwitcherList is.
The arrows indicating multiple windows are now in this._list
actor to the SwitcherPopup itself, since this._list automatically
manages its own children now.
At last, adapt (but preserve) the hack in CyclerPopup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Instead of overriding vfunc_get_preferred_width|height(), use the
already available Layout.MonitorConstraint to bind SwitcherPopup
to the primary monitor.
This commit turns SwitcherPopup.SwitcherPopup into a St.Widget
subclass, and gets rid of Shell.GenericContainer usage. Subclasses
were adapted to that too.
This class introduced a new challenge: it overrides show(). As per
discussions, we now call this.visible = true inside show().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
In the process of purging all usages of Shell.GenericContainer
of GNOME Shell, one specific problematic situation that might
occur is when classes have functions that would clash with any
ClutterActor or StWidget function name.
One of such example is SwitcherPopup.destroy(). Right now, this
class is a pure JavaScript class that wraps a real actor, but
soon this will change, and it'll become a St.Widget subclass.
Another problem with functions that mimic the toolkit ones is
the predictability of them; after calling destroy(), that widget
is expected to not be available anymore. In SwitcherPopup case,
it is still available for a short while. In this case, that's not
a big problem, but the show() and hide() functions in other clases
are more problematic because the actor's visibility does not
follow that.
This commit is a first step in cleaning that up, and changes the
SwitcherPopup.destroy() to fadeAndDestroy().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Shell.GenericContainer exposes the size negotiation machinery
through the use of signals. Signals are not specially performant.
One of the reasons is that they acquire a global lock for signal
handlers lookup. GNOME Shell has more than 2,000 actors at any
given point in time, up to 20 levels deep in hierarchy, making
size negotiation and painting non-trivial tasks. Such a critical
section of Clutter's machinery shouldn't rely on signals
whatsoever.
Regardless of that, Shell.GenericContainer is a workaround to
a non-existing issue anymore. It shouldn't be used anyway, and
any performance improvements that removing it can potentially
yield are bonuses to it.
This commit starts this work by removing Shell.GenericContainer
usage from Panel.Panel class. The class now extends St.Widget,
and as such, it has no "this.actor" field set anymore. A couple
of places where this actor field was used are adjuste as well.
It is important to notice that we now allocate the Panel itself
inside vfunc_allocate(). This was previously done before emitting
the signal by Shell.GenericContainer.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
ClutterVirtualInputDevice has the limitation that event flags won't be
made to contain CLUTTER_EVENT_FLAG_INPUT_METHOD, possibly causing feedback
loops.
As the event gets injected up the platform dependent bits, we can avoid
care on not pressing the same key twice, we still expect coherence between
key presses and releases from the IM though.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/531
When adding a favorite, we add the ID to the list of favorites, save the
setting and add the new app to the favorites map. However as writing the
settings value already results in reload() to update the favorites map,
the new app is usually already in the map when we add it.
The only exception is when the ID was found in the RENAMED_DESKTOP_IDS map,
in which case we end up adding both the renamed app and the original one.
Fix this by simply relying on reload() to properly update the map, just like
we already do in _removeFavorite().
https://gitlab.gnome.org/GNOME/gnome-shell/issues/471
On X11, reactive chrome must be added to the input region in order
to work as expected. However that region works independently from
any window stacking, with the result that the unresponsive-app dialog
currently blocks all input in the "covered" area, even in windows
stacked above the unresponsive window.
The correct fix would be to track the unobscured parts of the dialog
and set the input region from that, but that's quite cumbersome. So
instead, only track chrome when the corresponding window is focused
(or the dialog itself of course).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/273
As a mount operation's UI may be reused (for example after mistyping
the password), we only close the operation once the mount has finished
(successfully or with error).
We therefore need to track ongoing operations, which we currently do
by monkey-patching the corresponding volume object. However while the
underlying GVolume object indeed remains the same through-out the
operation, the JS wrapper object isn't referenced anywhere and may
thus be garbage collected, resulting in a stuck dialog.
Fix this issue by tracking active operations explicitly, so that all
involved objects are referenced until the end of the operation.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/565
Whenever a command runs in the run dialog, it
will be added to the history unless it is
already the last entry. This does not apply
for entries that are not consecutive, which can
result in long chains of commands which
alternate, e.g. lg, r, lg, r, lg, r. Not only is
this wasteful in terms of space, but also
inconsistent with how history works elsewhere,
e.g. in the shell.
Therefore, remove entries in the history that are
equal to the one that will be added to the end of
of the history when the entry already exists.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/524
The `hints` and `settingName` parameters to the agent call may define
the specific list of secrets NM actually needs from the user. This
seems to have been the intended use of these two parameters but only
recently did NM with the IWD backend start to use this to request 802.1x
secrets. So if `hints` is provided, ask user for the specific secrets
listed there and don't even look at what type of EAP method is in use.
Only the three types of secrets actually in use by NM's IWD backend are
supported for now -- they happen to be the same three that
_get8021xSecrets() had already supported.
This attribute was previously only assigned in show(). hide() compares
this attribute to 0. If hide() is called before show() is first called,
the comparison would give the correct result (undefined > 0 is false)
but log a warning:
JS WARNING: [resource:///org/gnome/shell/ui/workspacesView.js 529]:
reference to undefined property "_restackedNotifyId"
Initialize this attribute in _init(), alongside _scrollEventId and
_keyPressEventId which are also used in hide().
dialogContent is set to one of the elements of the list DialogContent,
but not all of those have a checkBoxText property. When logging out (as
opposed to shutting down), this causes a warning:
JS WARNING: [resource:///org/gnome/shell/ui/endSessionDialog.js
763]: reference to undefined property "checkBoxText"
(The line number corresponds to this line in 3.28.3.)
The warning is apparently not triggered if the undefined property is
used as part of a boolean expression:
gjs> var x = {};
gjs> x.a;
typein:2:1 strict warning: reference to undefined property "a"
gjs> if (x.b) { log('oh no'); }
gjs> x.c || ''
""
_setCheckBoxLabel() just checks the truthiness of its 'text' argument,
and the empty string is false-y, so passing '' rather than undefined has
no functional effect.
In recent Fedora 29, connecting to wifi access points from the
user menu (top-right menu) does not work. Clicking the 'Connect'
button just animates it but does nothing else. The logs show an
error "JS ERROR: Error: Expected type utf8 for Argument
'specific_object' but got type 'undefined'".
Looking into this, it seems the problem is these uses of the
`path` property of an NMAccessPoint. NMAccessPoint inherits
from NMObject, and NMObject *does* have a path property:
https://developer.gnome.org/libnm/stable/NMObject.html#NMObject--path
so at first glance this seems fine. But I poked around a bit
using libnm via Python (which goes via introspection, just like
this JS code does), and found that indeed AccessPoint objects
don't seem to have a `path` property there either.
Looking at the libnm code, this actually makes sense, because
the property is marked "(skip)":
https://github.com/NetworkManager/NetworkManager/blob/master/libnm/nm-object.c#L1291
and the introspection docs suggest that means it should be left
out of introspected output:
https://wiki.gnome.org/Projects/GObjectIntrospection/Annotations#Symbol_visibility
I'm a bit concerned that this was only found recently - whereas
the change to use `.path` in gnome-shell dates from October 2017
(d71af5e5) and the property has been marked (skip) in NM since
at least 2016 - but this all seems to add up. The obvious fix is
to replace use of `.path` with `.get_path()`, which returns the
path and is *not* marked (skip) and so *is* available via
introspection. I tested that this works in Python and also did
a test build of gnome-shell with this change and installed it on
an affected system, it does seem to fix the bug.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
gjs's D-Bus convenience explicitly expects a string representation
of an interface, but the new convenience method to load an XML
description from a resource introduced in commit f42d9df3e0 only
returns a string when using gjs from the GNOME 3.30 release. We
have so far managed to keep compatibility with the previous stable
gjs release, so fix up the fallback code to cast to string.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/578
Commit dbf993300a moved all inline D-Bus interface descriptions to template
strings so we can stop escaping line breaks.
Unfortunately that unveiled a grave bug in xgettext, which currently cannot
handle files that contain both backtick and slash characters - as a result,
translations from affected files have started to disappear as translators
run xgettext/msgmerge.
Instead of reverting the change and getting the crusty escaping back, we
will take this as an opportunity to stop inlining the XML altogether and
load it from a resource instead.
To facilitate that, add a small helper method that loads a D-Bus interface
description from a dedicated resource bundle.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/537
In GNOME-3.24, pressing Super+P or a similar function key would cause
a switch to the next available monitor configuration.
However, in GNOME-3.26, this was reimplemented in mutter and gnome-shell
and the behaviour is now different: pressing Super+P and releasing will
cause no change in montor configuration[1]. In this new design you have
to press Super+P and keep holding Super in order to keep the switcher
open, then press P again (or use the arrow keys or mouse) to
select the next one in the list.
This is incompatible with many Asus products such as Asus X530UN, where
pressing the presentation mode media key (Fn+F8) actually generates
the following keypress events from the keyboard controller:
Fn pressed: nothing
F8 pressed: nothing
F8 released: Super press, p press, p release, Super release (quick burst)
Fn released: nothing
With this firmware behaviour it's not possible to hold the keys and have
the dialog come up so that you can select another new mode.
To solve this, when the switcher is opened, select the next available
display config by default, which is more similar to the pre-GNOME-3.26
behaviour. Now pressing Fn+F8 on this laptop will result in the display
mode switch taking place.
[1]: The mentioned desired behaviour will at least happen after
https://gitlab.gnome.org/GNOME/mutter/issues/281 has been fixed
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/208
Since we always keep the active workspace until the user switches
to a different one, we may end up with two empty workspaces at
the end. It's not obvious to users why this happens, and there's
indeed no good reason for the behavior - just remove the trailing
workspace in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/536
Meta.ScreenDirection no longer exists. This fixes window menus on
multi-monitor systems.
JS ERROR: TypeError: Meta.ScreenDirection is undefined
_buildMenu@resource:///org/gnome/shell/ui/windowMenu.js:135:17
`NMConnectionDevice._sync()` is responsible for setting up the active
connection that we'll end up displaying. It expects the active
connection to already be in a map `_connectionItems`. If it isn't in
there, we get a null dereference and the indicator can get into a weird
state where it doesn't display devices / connections properly.
Let's change this expectation. If there is an active connection,
`_deviceAdded()` will eventually get to it and call `_sync()` to set up
the active connection state. We make `_sync()` tolerate there being no
active connection when it's called.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/140
We must remove the GFile reference from the representing object when an
extension has been unloaded as this won't be used anymore later (e.g. as cached
ref).
Throw an error using an informative message in case a mode uses a stylesheet
that can't be loaded, instead of crashing later because the theming can't be
properly computed, and thus the minimum size of the actors.
We currently assign the stylesheet to an extension whenever the file exists,
regardless of whether it actually loaded successfully or not.
And thus we load an extension that ships a stylesheet even if that file can't
be used.
There is no point in trying to load an extension if its stylesheet wasn't
loaded in the first place, so make sure this happens only on success.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/188
Ensure that the search provider operations (just getResultMetas requests
in the current implementation) in progress are properly cancelled when we
clear the UI, otherwise returned results might still be added when not
needed.
This is triggered for each provider by the SearchResults reset.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
Currently when the overview is hidden, any pending search is kept alive,
not only at remote search provider level (as per issue #183), but even
the shell providers proxies continue to get and process data. This happens
even if this is not needed anymore, while the UI reset is performed only
next time that the overview is shown (causing some more computation
presentation time).
In order to stop this to happen, when the overview is hidden, we have to
unset the search entry to an empty value as this would make SearchResults
to have empty terms list and that would make the proxies cancellable to
be triggered (without causing any further search to start).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
If the volume is removed before AUTORUN_EXPIRE_TIMEOUT_SECS seconds, we can stop
the timeout earlier as there's nothing to unset, while the volume instance
won't be valid anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
The _sync function for Message only updates the close button visibility,
so we can safely stop doing that if the close button get get destroyed earlier
(as it happens when clicking on it).
https://bugzilla.gnome.org/show_bug.cgi?id=791233
We need to avoid that we use the _dragActor instance after that it has
been destroyed or we'll get errors. We now set it to null when this
happens, protecting any access to that.
Add a DragState enum-like object to keep track of the state
instead of using booleans.
Remove duplicated handler on 'destroy' and just use a generic one.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code had bad typos in it, though: it reuses the `i`
index variable in its inner loop, where it should be using
the `j` index variable.
This commit corrects the i/j confusion.
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code has a bad typo in it, though: it confuses `objectPaths`
(the list of all object paths) and `objectPath` (the object
currently being processed this iteration of the loop).
That leads to a failure to synthesize the interface removal
events, and spew in the log.
This commit corrects the objectPath/objectPaths confusion.
Previously mutter listened to Xsettings (via GTK) to get notified
whether the shell showed the app menu. After X11 support was changed in
the direction of being less central, listening to this particular
Xsettings were removed with the intention of having the Shell tell
mutter directly whether it was showing the menu or not.
This commit makes that happen. It still travels through Xsettings (still
via Gtk), as the shell still gets that state from Xsettings, but fixing
this is out of scope for this particular fix.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/276
Flag some actors that are good candidates for caching in texture memory
(what Clutter calls "offscreen redirect"), thereby mostly eliminating
their repaint overhead.
This isn't exactly groundbreaking, it's how you're meant to use
OpenGL in the first place. But the difficulty is in the design of
Clutter which has some peculiarities making universal caching
inefficient at the moment:
* Repainting an offscreen actor is measurably slower than repainting
the same actor if it was uncached. But only by less than 100%,
so if an actor can avoid changing every frame then caching is usually
more efficient over that timeframe.
* The cached painting from a container typically includes its children,
so you can't cache containers whose children are usually animating at
full frame rate. That results in a performance loss.
This could be remedied in future by Clutter explicitly separating a
container's background painting from its child painting and always
caching the background (as StWidget tries to in some cases already).
So this commit selects just a few areas where caching has been verified
to be beneficial, and many use cases now see their CPU usage halved:
One small window active...... 10% -> 7% (-30%)
...under a panel menu........ 23% -> 9% (-61%)
One maximized window active.. 12% -> 9% (-25%)
...under a panel menu........ 23% -> 11% (-52%)
...under a shell dialog...... 22% -> 12% (-45%)
...in activities overview.... 32% -> 17% (-47%)
(on an i7-7700)
Also a couple of bugs are fixed by this:
https://bugzilla.gnome.org/show_bug.cgi?id=792634https://bugzilla.gnome.org/show_bug.cgi?id=792633
Instead of consuming the event in front of the input method. Enter
is sometimes overriden by those, so it seems better to let the IM
handle the key event, and react later to it if it got propagated
anyway. That is what ::activate does, so use this signal.
This used to work before ClutterInputMethod/InputFocus because the
IM received the events directly from stage captured events. This
is not the case anymore.
Closes: #440
We used to keep the workspace switcher slid out when the user made use
of workspaces. This was changed in commit 2d84975 to give more space
to window previews, but it turned out to make the switcher quite a lot
more difficult to interact with (rather than only being a question of
discoverability). So go back to the previous behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
During global grabs, actors miss enter and leave events required
for correct hover tracking. This can cause the workspace switcher
to get stuck while slid out, so ensure the actor's hover state is
synced after drag operations.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/161
Using a single resource file for all JS sources saves a couple of
build system instructions, but has some serious downsides:
- bundling the entire shell code with the tools blows
up their size unnecessarily
- the tools are rebuilt unnecessarily for any shell
code change
Autotools was painful enough to let this slip, but with meson we
don't have any excuses - using the actual dependencies speeds up
the build a tiny bit and reduces the tools' sizes from over 2M
to about 50k.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/192
We show a cover pane on top of the overview during transitions to
prevent issues caused by clicks and mouseover events when the overview
is not ready. Right now, this pane is only being shown on the primary
monitor, which obviosly allows interactions to happen before the
animations are finished on the secondary monitors.
To fix this, use the size of the whole stage for the cover pane.
Emitting it that soon results in JS warnings, as we don't have
everything in place yet. The position-changed signal will be
emitted from other locations as soon as we have it.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/464Closes: #464
When trying to close a window in the overview by clicking the close
button and the window doesn't get closed but a dialog is added to the
window afterwards, we close the overview and show the dialog.
Instead of adding a separate listener for the window-added signal to the
WindowOverlay, let the WindowClones remember that the close button was
pressed and activate themselves if a dialog is added after that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
When a dialog is added to a window while the overview is shown, we get
its parent using get_transient_for() so we can add it to the right
window clone.
If we have multiple layers of dialogs we have to do this recursively
until we find the root ancestor. This case currently results in an
infinite loop: Since parent is always set to the same window, the
while-condition will always be true.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/180
For the OSD, all parameters except for the icon are optional - if the
caller doesn't include the 'label' option, the OSD won't show a label
etc.
While this makes sense for an API, it means that we have to be careful
to correctly differentiate an option that was omitted and an option
that has a 'falsy' value like false or 0.
Unfortunately since commit ccaae5d3c we no longer do, with the result
that OSDs meant for the first monitor will show up on all, and a level
of 0 is presented as no level bar instead of an empty one, whoops.
https://bugzilla.gnome.org/show_bug.cgi?id=791669
GSettings now recognizes per-desktop overrides that can be used
to change schemas' default values for a particular desktop. This
is not entirely unlike our existing custom override mechanism in
mutter, except that it is not limited to keys in org.gnome.mutter,
and it doesn't require a separate schema - the latter means that
we (and gnome-teak-tool) no longer have to figure out the correct
schema for the current login session and just use the original one.
https://bugzilla.gnome.org/show_bug.cgi?id=786496
Show an overamplified volume icon if volume is louder the max normalized one.
Use a similar logic as gnome-settings-daemon to delimit values, restricted
to output.
The purpose is to help users remember that visiting some websites or
using some apps can get LOUD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Implement for barLevel an overdrive area. This is a zone represented via a
different styling to indicate that you are bypassing the normal zone of
a given level, without reaching yet the maximum limit.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Depending on hardware and recorded volume level, turning up the speakers
to the maximum volume may not be enough and the user will want to amplify
the volume above 100%. Currently this requires opening the sound Settings
panel which gets cumbersome when required repeatedly.
To support this case better, allow raising the sound volume above 100%
directly from the system menu if the feature is enabled via the
`allow-volume-above-100-percent` key in `org.gnome.desktop.sound`.
Allow osd representing levels that can be more than 100% by accepting
an optional parameter setting that maximum level.
gnome-settings-daemon will use this to indicate volume levels above 100%,
which our own volume indicator will soon support as well.
Ensure that both barLevel and slider can support a higher maxValue than 1
and computes various positions based on it.
It defaults to 1 if not set.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
Reuse the BarLevel class to get similar drawing behavior as Slider.
Rename theme css impacted properties and ensure that the osdWindow
remains accessible.
Ensure we don't force setting a custom border color like on the OSD.
https://bugzilla.gnome.org/show_bug.cgi?id=790280.
In a9ad91c831, a bug was introduced in the following code:
```c
this._settingsAction.connect('clicked',
this._onSettingsClicked().bind(this));
```
Notice that the callback is being executed! This commit
fixes that by removing the '()' from the callback.
As strings are guaranteed to use UTF-8 in the GNOME platform, generic
file APIs like g_file_load_contents() return raw data instead. Since
gjs' recent update to mozjs60, this data is now returns as Uint8Array
which cannot simply be treated as string - its toString() method boils
down to arr.join(',') - so use gjs' new ByteArray module to explicitly
convert the data.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/179
The settings action button in the system menu simply launches
gnome-control-center, so we want its icon (and accessible name)
to always match the app. So instead of keeping the button in-sync
with Settings, just look up that information from the app itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
We can simply request the symbolic variant from CSS so that we don't
have to append '-symbolic' to all the names. This will always make
it easier to pick up that information from external sources (like
.desktop files).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/433
Commit e5c95b910d refactored the workspace animation to also handle
animations that involve all surrounding workspaces, but due to an
ill-advised review comment (guess whose) it broke the animation
for non-neighboring workspaces.
Update the code to handle correctly whether in a given direction:
- we have the target workspace of a given index
- we have a neighboring workspace
- we don't need to animate anything
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/182
Add a debug command (to be executed manually via Alt+F2) to check
that all of gnome-shell's file descriptors have the CLOEXEC flag set.
This is important so that internal file descriptors do not get passed
to apps when they are launched.
It prints a warning message for every fd that does not have the flag set.
fdwalk() is used from the standard library if available (it is not
available in glibc), otherwise we use the same implementation as glib
has internally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/132
When 4fg swipe motion happens, set up early the workspace switching
animation with all surrounding workspaces. This allows us to move
all content back and forth in any direction. This works on both
touchcreens and touchpads.
When the gesture is activated, the same data is reused to follow
up with the tween animation.
The threshold has been also doubled, it was fairly small to start
with, and feels better now that workspaces stick to fingers.
https://bugzilla.gnome.org/show_bug.cgi?id=788994
Besides the separation into distinct functions, the stored data has
been made able to generically store windows from all surrounding
workspaces. All while keeping a special mode to animate between two
workspaces (The usual till now), this is the only mode exercised so
far.
In order to ease animations, all window groups are now children of
a common container, which is then animated.
A custom callback type is more convenient, but only as long as no
other callback type is required. We are about to add functionality
that does not return the filename to a screenshot saved on disk, so
prepare for that by moving to GIO's generic async callback pattern.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/286
Fullscreen windows cannot be restored by touch device users unless the
application adds support for it.
As it is unlikely to change all application lets introduce a top edge
drag gesture which unmakes fullscreen windows.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/123
Make the indicator for active remote access use the warning color, to
indicate the severity of allowing remote access.
This only makes the indicator icon orange; the icon in the system menu
is still white.
When in lockscreen mode there's no point of resetting the auth login as there's
no welcome screen, and that would just cause the UI to freeze, with no reason.
This could have been useful if we were stopping the user to login for a given
time after ALLOWED_FAILURES attempts, but this is not the case yet.
When we get a reset signal the preemptiveAnswer should be also unset or it will
be used next time the user authPrompt will be activated, even without any further
user interaction.
Fixes#311
Add an indicator for when there is something access the display server
remotely. This could be 1) remote desktop, 2) screen cast or 3) remote
control, but all effectively applications using
org.freedesktop.portal.ScreenCast or org.gnome.portal.RemoteDesktop as
well as gnome-remote-desktop using the corresponding org.gnome.Mutter
APIs directly.
As it is now, it'll simply show a single icon for when anything is
having an active session, and a single action "Turn off" that'll close
every active session.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/160
The input method may hint that certain keycodes should be pressed/released
besides the textual information in ::commit. An example is hitting space
in some IMs to commit text, where both ::commit happens, and an space is
visibly inserted. In order to handle this properly, we must honor
::forward-key-press.
In order to cater for the case that a keypress is forwarded while handling
that same keypress in a physical keyboard, check the current event being
handled and just forward it as-is if it matches. This is necessary to
prevent state from being doubly set, and the second event silenced away.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/275Closes: #275
If we're started by systemd, we won't be in the user's display session.
However, this is still the session that will get locked & unlocked. Ask
logind what the 'display' or 'greeter' session is, and watch for the
Unlock signal for that session to know when to unlock.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/137
For windows, the cursor location needs to be adjusted by the frame
offsets. However we cannot assume that there is a window, as the
shell itself can have the key focus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/414
Maximized and tiled windows can be restored with a drag gesture,
not only from their titlebars, but also from any non-reactive
parts of the top bar above the window. Currently this only works
for actual pointer devices, extend the behavior to handle touch
as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/112
If the Escape key is used for a window/app cycler/switcher shortcut
(such as "Switch windows directly"), then there is no way to cancel
the switching/cycling operation with the keyboard.
This change allows cancelling such an operation by pressing the Tab
key, but only if Tab is not already being used by the current
switcher/cycler shortcut.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/315
Key events involved in a keyboard shortcut are not completely consumed by
Mutter. That means that if the popupMenu is bound to a shortcut (e.g.
Alt<Space>) and the user keeps the keys pressed, the same key-event will be
delivered to the popupMenu. We can workaround this issue filtering out all the
events where a a modifier is down (except capslock).
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/372
Destroying and recreating the entire events list on every change is not only
wasteful, it also breaks the clear functionality as messages scheduled for
removal are replaced with "new" messages after the first message has been
removed.
Address both issues by keeping track of all messages and re-use them
whenever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/325
And stop using FocusCaretTracker for caret position purposes. This
new object uses 1) the text-input protocol in wayland and 2) Info
from IBusPanelService for X11 (which is meant to work for XIM too).
This drops the usage of AtspiEventListener for OSK purposes, which
is best to avoid.
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
If a clone gets destroyed before the corresponding MetaWindow is
removed from the workspace, we will still find it in the list of
clones and try to destroy it again. Avoid the resulting warnings
by updating the list of clones immediately when a clone is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
Remove any usage of MetaScreen, as it has been removed from libmutter
in the API version 3. The corresponding functionality has been moved
into three different places: MetaDisplay, MetaX11Display (for X11
specific functionality) and MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
This may be the case where keyboardIndex is -1, which may be the
case where either the keyboard monitor hasn't been set yet, or
the keyboard is being unmanaged and meta_window_get_monitor
returns -1
https://bugzilla.gnome.org/show_bug.cgi?id=788882
When middle-clicking an app icon on the Dash, it will always try to open
a new window of that app, even if the app doesn't support multiple
windows. Meanwhile, Ctrl+click on an app will only open a new window if
the app allows it.
This change prevents middle-clicks on app icons from opening new windows
for apps without multi-window support.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/316
When the actor that has the key focus is destroyed, Clutter moves
the focus to the stage. In case the destroyed actor was inside a
ModalDialog, this breaks any keyboard interaction: keynav is broken
because the stage isn't in any focus chain, and access keys like
Escape because they are handled on the dialog's parent.
The only dialog that may destroy a child without recreating the dialog
buttons (and thus moving the key focus there) is the WirelessDialog,
fix it by keeping the key focus within the dialog when removing networks
from the list.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/76
Just like we did for the window list in app icons' context menu,
provide a fallback for window captions in the window picker rather
than showing blank items to the user.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/26
The app icon's context menu contains a list of open windows,
identified by their title. As we currently don't handle the
case where the app didn't set a title, we end up with empty
menu items which looks clearly broken. Fall back to the app's
name in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/26
The close dialog for non-responding windows is closed automatically
when we detect that the window is responding again. However as we
currently only ping the window in response to certain user actions
(like focusing the window or opening the window menu), this can
easily go undetected.
Address this by periodically pinging the window while the close
dialog is shown.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
The dialog won't be visible when unredirection is in place (for example
while a fullscreen window is focused), so disable unredirection while
the dialog is up.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/298
Similar to what it's done when the main connection changes, we need
to make sure that the icon in the panel gets updated before calling
_syncConnectivity(), so that the icon gets always updated if needed,
regardless of whether there's an active connection or not.
This is needed because there's at least one case when an icon should
be shown when the computer is not connected to any network: when a
hotspot has been enabled, which can be useful even if there's not
an internet connection to share (e.g. to easily allow connecting
other devices to the computer.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/214
While the libnm-glib version of the function returns a GByteArray*
that gjs can directly cast to the required gutf8*, the libnm function
returns GBytes* from which we need to explicitly fetch the data.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/136
commit 642107a2 attempts to avoid resetting the current keymap on
spurious input source changes.
It does this by checking if the current layout id is found in
the new list of layouts and resetting the current layout to the
associated match in the list. By not nullifying the current
layout, it won't get subsequently reset.
Unfortunately, if the order of the list changes, resetting the
current keymap is still necessary, since the order corresponds
with the index of the activated group.
This commit changes the code to nullify the current layout if
its group index changes.
https://bugzilla.redhat.com/show_bug.cgi?id=1573923
The IM can pretty much update the input sources anytime (even if
to set the same ones). That ends up triggering rebuilding all user
defined keymaps, and losing modifier state if we are unfortunate
enough that this caught us while pressing one.
One common situation seems to be password entries, resulting in
the wrong character being printed if the first character happens
to require the shift key.
If the current keymap is not found in the newly loaded list,
this._current will end up null, with the same behavior as we get
currently (immediate keymap reload).
https://bugzilla.redhat.com/show_bug.cgi?id=1569211https://gitlab.gnome.org/GNOME/gnome-shell/issues/240Closes: #240
Commit f285f2c6 changed Scripting.createTestWindow() to accept a parameter
object instead of a parameter list but forgot to remove the width and height
arguments. This breaks the "core" test as all windows are created with default
settings.
We use the close() method to disconnect signal handlers set up in
init(), however the handler ID is only valid in the first call in
case the method is called more than once.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/221
If we get an error during device enrollment, the message might be
prefixed to indicate that the error came from the remote peer. We
are presenting that message to the user so strip that prefix away
if it was there.
The devices emitted (device, error) while the connected handler
was expecting (error, device). The former is more consistent
with the rest of the code (so change it to device, error).
The _blockTimedLoginUntilIdle method sets a timeout to be called after
the user is idle for 5 seconds. That timeout is erroneously given the
source name "[gnome-shell] this._timedLoginAnimationTime" which looks
like a copy-and-paste mistake. The original intention was probably to
use a source name of "[gnome-shell] this._timedLoginIdleTimeOutId" which
more closely matches existing convention for source names.
This commit fixes that.
Make sure the focus isn't grabbed right after user interaction starts a
new timed login. Only grab it after the idle timeout is done and on the
first run instead.
Normally, we give the user a 5 second grace period of inactivity before
starting a timed login operation. Unfortunately, that grace period
timeout isn't properly removed if the timed login operation is restarted
during the grace period. That means the timeout handler can
inadvertently get called multiple times leading to the grace period
duration getting subtracted from the total animation time more than
once.
This commit ensures we only ever have one grace period timeout scheduled
at a time.
The timed login feature currently cancels the timed login operation when
a user presses a key but, oddly, only hides the indicator when the user
releases the key. This means that if a user holds down a key that
doesn't key repeat, the timed login indicator will continue to run after
the timed login operation is cancelled.
This commit address the problem by ensuring the timed login indicator is
hidden on any key press event, at the same time the timed login
operation is canceled.
Modes, extensions and other GNOME Shell assets are searched in appropriate
subdirectories of each directory in XDG_DATA_DIRS, falling back
to global.datadir.
However, this isn't the case for themes, which are currently always expected
in global.datadir, even when referenced by a mode in a different XDG_DATA_DIR.
The fix is to have the theme finding pattern follow the same logic as other
elements.
Fixes#167.
The HIG discourages the use of icons in menus except for "noun" items
(files, bookmarks, ...). While those should be rarely used in the
application menu, it still makes sense to support them in the few
cases where they are used.
https://bugzilla.gnome.org/show_bug.cgi?id=760985
Otherwise it happens that porthole is computed again after that the
overlay is hidden (triggered by a layout reallocation) and thus not
regenerated again afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=792687
The author of the original URL-matching regex warns[0] that the pattern may
cause certain regex engines to lock up with certain input, namely patterns
that contain parentheses. It turns out SpiderMonkey is affected, but rather
than switching to the author's improved version (that is still crazy), sim-
plify the pattern a bit by removing support for nested parentheses in URLs.
Even a single pair of parentheses is extremely rare, so this is unlikely to
make a noticeable difference (other than not locking up SpiderMonkey of
course) ...
[0] http://daringfireball.net/2010/07/improved_regex_for_matching_urls
Since commit 78a92fb6be we no longer pop up authentication dialogs
on the lock screen, however any dialog that is already open at that
time remains open. This is unexpected, so hide the dialog until
the screen is unlocked again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/166
Since commit 1939e22c22, we move the keyboard focus with the hover
highlight. However while this makes sense when interacting with
the window picker, it interferes with keyboard navigation of other
components like dash or top bar. Address this by only moving the
focus when the previous focus was already inside the window picker
or unset.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/50
The original UTC support in GWeather piggy-backed on the existing API, but
as "country" or "city" don't make sense in the context of UTC or AoE, the
concept of "named timezones" was introduced. Handle those explicitly to get
back labels for those locations.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/150
We don't toggle the overview if the request happens too close to the
last activation, to filter out double-clicks or activation by both
the hot corner and a click. However as the check is based on the
real time, the check breaks if the system clock moves backwards and
the last activations appears to be in the future. Fix this by using
monotonic time which is guaranteed to only move forward.
https://bugzilla.gnome.org/show_bug.cgi?id=763886
While polkit requests *should* be the result of a user action, that's
not always the case in practice and authentication dialogs can pop up
out of nowhere at any time. That's always annoying, but particularly
bad on the lock screen. If we disabled the polkit component altogether,
the fallback GTK-based agent would kick in, so instead handle the case
explicitly and postpone showing the dialog until the session is unlocked.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/179
Even though we are using an "xkb" source, it still makes sense to
pass the event through the IBus simple engine, in order to let it
handle compose keys and ctrl+shift+[u|e].
https://gitlab.gnome.org/GNOME/gnome-shell/issues/115Closes: #115
boltd 0.2 gained a property that indicates if it is authorizing
devices or not. If it indeed is not authorizing then we wont
try to enroll new devices because that would otherwise lead to
and error.
When we move keyboard focus to the search entry, we replay the key press
that triggered the move to the entry using ClutterActor's event() method.
Since commit 3b293e91e we specify that the event is in the capture phase
to make it work with StIMText, but now that commit 83accce24 removed it,
we have to return to the expected non-capture flag that matches the orig-
inal event to unbreak find-as-you-type functionality.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/72
Find-as-you type was never automatically handled by StIMText, but
by the existing stage key-press handler. The functionality broke
for a different reason, we will fix it after reverting the recent
captured-event changes.
This reverts commits bc4462cd0c and e4ee944d8d.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/72
Since commit c4f2bb5f, close buttons are hidden by making them fully
transparent rather than setting their visibility to false to keep
the overall message layout stable. As a result, the buttons now work
even when invisible, which is clearly unexpected - fix this by updating
the reactive property appropriately.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/66
When not using arrow notation with anonymous functions, we use Lang.bind()
to bind `this` to named callbacks. However since ES5, this functionality
is already provided by Function.prototype.bind() - in fact, Lang.bind()
itself uses it when no extra arguments are specified. Just use the built-in
function directly where possible, and use arrow notation in the few places
where we pass additional arguments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/23
imports.misc.ibusManager.IBus is declared as const, so referencing it
from another module triggers a warning with recent mozjs. As of commit
083d11a032 IBus is mandatory, so just make it a regular import to avoid
the warning.
Right now we emit session-activated any time the bullet
moves in the session menu. That includes at startup when
picking an item arbitrarily, and any time GDM reports the
session was read from the user's account settings.
session-activated informs GDM about the newly selected session,
so emitting it in response to GDM reporting a session is a
bad idea.
This commit changes the code to only emit session-activated when
the user explicitly activates a session item from the gear menu.
Note, we no longer set the active session explicitly at start up.
This is a good thing since the item we were picking wasn't
necessarily correct. It does means if GDM fails to inform us
about the correct default session we'll now show no bullet instead
of a bullet on the wrong item.
https://bugzilla.gnome.org/show_bug.cgi?id=740142
gnome-shell currently initiates an automatic login attempt if
timed login is enabled and the timed login animation completes.
Unfortunately, if animations are disabled (as is the case for
virtual machines) then the timed login animation will complete
instantly, and timed login will proceed immediately after gnome-shell
has noticed the user is idle for 5 seconds.
This commit addresses that problem by initiating timed login and the
animation from a main loop timeout, instead of using the tweener api.
This is pseudo-class is added on .shift-key-uppercase whenever the shift
state is latched, a matching selector would be:
.keyboard-key.shift-key-uppercase:latched {}
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
Drop the UTF8 glyphs from those, and add style classes so those can be
specifically themed and given a background image. The style classes are:
.keyboard-key.enter-key{}
.keyboard-key.shift-key-lowercase{} /* applies while lowercase */
.keyboard-key.shift-key-uppercase{} /* applies while uppercase */
.keyboard-key.layout-key{}
.keyboard-key.hide-key{}
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
Do the finicky checks to adjust key widths and whatnot based on other
values than the label. This makes the label exclusively used for
presentation (i.e. setting up a St.Label).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
Instead of latching all states, make shift unlatched by default, and only
latched when making a long press on the key. When not latched, the keyboard
will switch to the first level (alphabetic lowercase) after the first key
press.
Also, move the actual level switch to Key::pressed, so it feels more
reactive on long press.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
It was mistakenly connecting twice to the 'released' signal. Also, move
level changes to key release, since it will be more convenient to hook
latched states on long press.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/46
These objects created this.actor being the St.Button, and a surrounding
this.container actor that is the actual actor callers care about. Turn this
around and make this.actor be the parent-less actor, and this.keyButton the
contained internal button. This is more consistent with gnome-shell style.
Commit 8fdf47ea5b removed _addKeys(), but forgot one caller. We just want
to regenerate the keyboard for the current group, so call into the
_onGroupChanged function.
While the scale factor is taken into account for app icons, we set
an explicit size when combining the into a folder icon - unless we
take the factor into account, the result will be too small on HiDPI
displays.
https://bugzilla.gnome.org/show_bug.cgi?id=792259
The captured-event handler just redirects focus there on the first keypress,
what it doesn't account for is that other entries may be active while the
Activities overview is opened (eg. alt-f2, or other modal dialogs). Play
along with other entries, and make it only steal focus if no other entry
is selected.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/33Closes: #33
Similar to what has been done for the apps switcher, this allows closing
windows pressing W or F4 while operating the windows switcher popup or
the apps switcher popup while navigating the list of windows for an app.
https://bugzilla.gnome.org/show_bug.cgi?id=620106
This will be mainly useful for closing apps from the applications
switcher, but can be implemented generically enough to select the
nearest existing item after removal if there's any, or destroying
the popup's actor otherwise.
Specifically for the apps switcher, doing this also removes the need
of having to manually either update the current app in AppSwitcher
and highlight it, if there are still any items after the removal, or
simply destroy the AppSwitcher otherwise. Besides, calling _select()
in the handler for item-removed makes sure that the list of thumbnails
in the switcher is always closed, if open, when quitting the app.
https://bugzilla.gnome.org/show_bug.cgi?id=620106
Make sure that the items from the applications switcher and the windows
switcher are removed when the related applications get stopped, or some
of the associated windows closed.
https://bugzilla.gnome.org/show_bug.cgi?id=620106
glibc 2.27 introduced new format specifiers for the month names.
It's obligatory to use them in several languages already and it's
encouraged to use them for all languages because it is not destructive
for any language. As more languages are expected to follow this
standard it's better to use the "%OB" format specifier now so it will
start working correctly automatically.
See also: https://sourceware.org/bugzilla/show_bug.cgi?id=10871
This standard has been also working in BSD and OS X since 1990s,
if anyone tries to use gnome-shell in these systems.
Note: This will not work correctly with glibc < 2.27, there is no
detection whether the system is old or new.
https://bugzilla.gnome.org/show_bug.cgi?id=780957
We keep track of the lock state and restore it on startup to prevent
a crash from bypassing the screen lock. However on wayland, a crash
doesn't result in gnome-session restarting gnome-shell, but brings
down the entire session - that is, restoring the lock state does not
actually protect the existing session in that case, but forces the
user to authenticate twice in order to start the next session. This
is clearly not helpful, so avoid this by not saving the state when
running as wayland compositor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/17
Align and center the date entry with the workspace's workarea.
This way, maximized applications have their window aligned with the top date
entry.
This doesn't change anything for desktops with no docks or when left/right
workareas are aligned with the monitor.
The offset is leftOffset - rightOffset:
(workArea.x - monitor.x) - (monitor.width - ((workArea.x - monitor.x) +
workArea.width))
https://bugzilla.gnome.org/show_bug.cgi?id=792354
We will now basically act as "policy provider" for thunderbolt
peripherals by using org.freedesktop.bolt service: when new
devices are connect and session is a unlocked user session
we will automatically enroll (authorize and store in the database)
them.
If new devices are connected but the session is locked a message
will be shown informing the user that the device needs to be
reconnected to properly work.
The org.freedesktop.bolt service is provided by the "bolt" daemon.
Currently the language options displayed pretty much mirror those of the
top bar keyboard layout selection popup. It may make sense in the future
to only list languages, and automatically switch to the enabled IMs that
the OSK can benefit from (eg. by filling in suggestions).
The focused window will move up/down together with the OSK if the focus
area happens to be covered by the area to be covered by the OSK. This
state is reverted whenever the window loses focus, given it wasn't
relayout in between.
IBus was initially made optional as gnome-shell depended on too
recent API. This API is now old enough and gnome-shell is committing
further to IBus by implementing a ClutterInputMethod through it.
Let's just make IBus a mandatory dependency, instead of making code
paths trickier to cater for situations where it's missing.
We do not need the parent Keyboard object to handle those specially, the
code can be self-contained enough. The Key object will simply emit
pressed/released events containing the keycode/string, be it from the
parent key or one contained in the BoxPointer.
StIMText used to handle key events for IM consumption in the capture phase,
this made the search box work automagically with nothing explicitly focusing
it. Since it's no longer the case, it has to be done somewhere.
Instead of manually resizing each key everytime the keyboard needs to
relayout, have a special grid container that will preserve aspect when
resized.
This actor works in two stages though, first the keys need to be added
and then layoutButtons() need to be called for the actors to be
reparented to the container with the right attachment options.
This is a ClutterInputMethod implementation using IBus underneath. The
input method will interact with the currently focused ClutterInputFocus,
be it shell chrome or wayland clients through the text_input protocol.
The keys possibly need resizing after a (new) layer has been set, there's
however calling places that don't. Instead, fold this._redraw() into
setActiveLayer().
Getting the necessary "setting enabled, or input from touchscreen"
conditions to have the OSK shown are not enough on the lack of a
current focus. As we are setting up the caret tracker here, wait for
the focus in event before showing the keyboard.
This fixes 2 issues, with the setting disabled it became really hard
to get the OSK hidden on eg. touchscreen->pointer device switches,
as visibility only depended on the a11y setting here. And secondly,
enabling the setting would always end up with the OSK being shown
regardless of focus, while it should stay hidden if there's no text
edition.
https://bugzilla.gnome.org/show_bug.cgi?id=788188
If the underlying X11 input driver creates multiple devices from a single
device node, we may end up picking up the wrong device. So, instead of
picking the first device based on node and bailing out if it's not a pad,
pick the first pad that has that device node, and bail out if there is
none.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/10Closes: #10
It turns out that NetworkManager does export the directory as pkg-config
variable after all, so use that instead of building the path ourselves
from the prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=789811
We want touch events to enable the keyboard and focus tracking, but
not to actually show it right away. Implement that behavior by only
changing the visibility of the keyboard when triggered by a GSettings
change.
https://bugzilla.gnome.org/show_bug.cgi?id=788188
We enable the keyboard when it is either enabled explicitly via
a11y settings or when using a touch device. We'll soon want to
special-case changes to the GSettings, so track its value in a
dedicated property.
https://bugzilla.gnome.org/show_bug.cgi?id=788188
When the agent doesn't work (e.g. when the screen is locked), it shouldn't be
registered with NM. Otherwise it will keep cancelling the requests that
could happily be serviced with system secrets.
https://bugzilla.gnome.org/show_bug.cgi?id=789811
The native agent already forgets about the request at the point it's
serviced and the further attempt to use it (e.g. cancel it when the screen
is locked) will trigger an assertion failure:
** (gnome-shell:30862): CRITICAL **: shell_network_agent_respond: assertion 'request != NULL' failed
https://bugzilla.gnome.org/show_bug.cgi?id=789811
Show a dialog informing the user each time the keyboard accessibility
flags are changed by one of the clutter backends (either from toggle
keys or two-keys-off modifiers).
https://bugzilla.gnome.org/show_bug.cgi?id=788564
The background code allocates a GnomeWallClock when its first created,
but neglects to drop a reference to that clock at destroy time.
The undestroyed clocks lead to a timerfd leak that eventually prevents
the shell from functioning.
https://bugzilla.gnome.org/show_bug.cgi?id=791655
If there are locations unknown to the libgweather version gnome-shell is
using, don't crash.
JS ERROR: TypeError: b.location is null
WorldClocksSection<._clocksChanged/<@resource:///org/gnome/shell/ui/dateMenu.js:141:1
WorldClocksSection<._clocksChanged@resource:///org/gnome/shell/ui/dateMenu.js:139:9
https://bugzilla.gnome.org/show_bug.cgi?id=791148
Since commit ef1e27966d turned DashItemContainer into an StWidget,
the destroy() method overrides the ClutterActor method, which is at
the very least bad style. Instead, follow the usual pattern of using
a ::destroy handler.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
Labels are currently destroyed from both animateOutAndDestroy()
and destroy(), which now (rightfully) triggers a gjs warning. As
the label is created unconditionally since commit 36e5ae4a25,
mirror that and always release it in destroy() and hide it
elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
In the current code it could happen that we've menuItems and indicatorLabels
for sources that aren't anymore around, because in case a source is removed
we don't cleanup the their container objects.
Also, we should nullify InputManager's _currentSource when sources change
or it might point to some invalid data again.
So it could happen that we try to access an invalid menuitem or label
if a source change happens mentioning a source that has been deleted.
https://bugzilla.gnome.org/show_bug.cgi?id=788931
These end up emitting item-drag-end/window-drag-end pretty much
without checks. Given the MetaDnd object may end up emitting
::drag-leave as a result of the plugin ending its grab, this
would result on spurious emission of those events and subsequent
warnings.
For extra paranoia, the _inDrag variable has been split into
_inItemDrag/_inWindowDrag so we can't cross the streams.
https://bugzilla.gnome.org/show_bug.cgi?id=784545
While window attention notifications are created by the shell itself
rather than applications (most likely as a result of focus stealing
prevention), users still commonly link them to the application for
which they are shown. It makes therefore sense to follow the appropriate
policy set by the user rather than showing them unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=779974
Since 0b02f757f8 we track the button that should have key focus
when the dialog is opened. However when the dialog is reused, the
button may get destroyed - clear the initial focus in that case to
allow setButton() to set a new one.
https://bugzilla.gnome.org/show_bug.cgi?id=788542
This D-Bus property was never been added here, which caused inconsistencies
under some scenarios (e.g. coming back from suspend) if some devices were
previously paired, since _sync() would then make the bluetooth menu visible
unconditially, because of the proxied property evaluating to 'false'.
Adding this to the D-Bus interface makes sure that it's no longer undefined
and returns the right value, fixing the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=789110
Commit 28ca96064b added support for setting PopupImageMenuItem's icons
via GIcons as well as via strings. However as the check whether an object
implements the GIcon interface only works on GObjects, specifying an icon
name was broken. Fix that to actually allow both strings and GIcons.
https://bugzilla.gnome.org/show_bug.cgi?id=789018
The idea behind always showing the icon on the login screen is that
the users' needs aren't known at that point. However we can achieve
the same behavior by including the 'always-show-universal-access-status'
key in GDM's presets, so drop the special-case.
https://bugzilla.gnome.org/show_bug.cgi?id=788943
We were handling being initially headless by only setting the primary
and bottom monitor if there was any primary monitor, then checking the
primary monitor reference before making calls assuming there was any
monitors.
What we didn't do was unset the primary and bottom monitor when going
headless, meaning that temporarly disconnecting a monitor while having
windows open caused an assert to be triggered due to various code paths
taking the path assuming there are valid monitors.
Unsetting both the primary and bottom monitor when going headless avoids
the code paths in the same way as they were avoided when starting
headless.
https://bugzilla.gnome.org/show_bug.cgi?id=788607
We are already closing top bar menus on session mode changes, but
as this behavior makes sense for any other menus as well - dash
context menus or the background menu for instance - just generalize
the behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=787676
Commit 1c7a3ee61b broke setting the initial key focus for default
buttons added via addButton(). Fix this by allowing the dialog class
to provide a different default widget to ModalDialog than the entire
dialog itself.
https://bugzilla.gnome.org/show_bug.cgi?id=788282
We don't use different hover- and focus indications for window previews,
so using keyboard navigation after hovering a clone often has surprising
results when the previous focus window wasn't the selected one. Address
this by simply moving the keyboard focus with the highlight.
https://bugzilla.gnome.org/show_bug.cgi?id=786546
By default the focus chain uses the same order as the list returned
by clutter_actor_get_children(), which corresponds to the z-order.
This doesn't work well in the window picker, where clones follow
the stacking of windows to ensure a correct overview transition,
but previews are laid out purely based on space efficiency. As
a result, the order in which window previews are navigated when
tabbing around is essentially random. Fix this by providing a
focus chain implementation that is based on the visual layout
of the previews rather than the stacking.
https://bugzilla.gnome.org/show_bug.cgi?id=786546
Don't assume there will always be a primary (logical) monitor, or any
(logical) monitor at all. This includes not allocating / layouting /
styling correctly when being headless.
The initial background loading will also be delayed until there are any
(logical) monitors connected.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
On the screen shield, the only possible interaction is lifting the
shield. The on-screen-keyboard is not useful for that, and the drag
gesture from the bottom may in fact conflict with dragging up the
shield, so disable it.
https://bugzilla.gnome.org/show_bug.cgi?id=788339
As notification icons now align with the title, it makes sense for
them to follow the text size in case a text-scaling-factor other
than 1 is applied.
https://bugzilla.gnome.org/show_bug.cgi?id=788265
Not doing this will throw a backtrace when running on headless mode and
trying to show a notification, due to Main.layoutManager.primaryMonitor
being undefined, so it's better to return early.
https://bugzilla.gnome.org/show_bug.cgi?id=730551
When making any D-Bus call through the GDBus' proxy wrapper with an
invalid D-Bus object path, gnome-shell hangs.
Supposedly FdoApplicationProxy constructor should validate the passed
D-Bus object path and throw an error if the path is invalid. Since it
does not do that, we work it around by making sure that the deduced
D-Bus object path is valid or throw an exception if the path is not.
https://bugzilla.gnome.org/show_bug.cgi?id=787902
Some application IDs contain hyphens, which are not allowed in D-Bus object
paths, so we need to update the translation by converting them to something
that's a valid object path. This is consistent with what GApplication does.
https://bugzilla.gnome.org/show_bug.cgi?id=787902
Commit 289f982949 broke all remote providers when adding support for
non-auto-started search providers: Whether the provider should be
auto-started needs to be known in the constructor, so setting the
property on the constructed object doesn't work.
https://bugzilla.gnome.org/show_bug.cgi?id=787986
Ensure that key-above-tab for selecting window application is consistent
with the down key.
After focus an application in the switcher:
- if you press down, the window thumbnails are previewed, and first element
is selected
- if you press key-above-tab, the window thumbnails are previewed, however
the second element is directly selected.
Make both interactions always select the first element.
https://bugzilla.gnome.org/show_bug.cgi?id=786009
This would be used by search providers which only operate on data in the
running instance, such as the terminal's search provider which finds the
shell in the tab matching the search text.
https://bugzilla.gnome.org/show_bug.cgi?id=785380
Using a unicode character here means it may look quite different
from the intended style (for instance with emoji fonts). Avoid
this by providing a custom icon and use that instead.
https://bugzilla.gnome.org/show_bug.cgi?id=766368
It's not exactly clear what changed - gobject-introspection, gjs - but
the newly added gweather_condition_to_string_full() API no longer works
like it used to. The replacement code does look more idiomatic anyway,
so just fix the code without investigating the reason of the breakage.
https://bugzilla.gnome.org/show_bug.cgi?id=787423
If a source actor is set, use that for determining the arrow side (i.e.
whether the BoxPointer widget should expand in a certain direction).
This is better because it ensures that the popup is displayed on the
same monitor as the widget it originates from.
Without this, entering text with a vertically aligned input method
close to the bottom of a monitor would expand the BoxPointer downwards
on the monitor beneath it, instead of upwards, which is what one would
expect.
https://bugzilla.gnome.org/show_bug.cgi?id=786886
Now that full-sized window previews are allowed again it makes sense to
align the window previews with the pixel grid to prevent unscaled
windows from looking blurry in the overview.
Every action has specific associated terms that
identify that action and show it in the search
results. Methods to match the actions as well
as getting properties of specific actions are
needed in order to provide a way of using the
actions.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
We want to be able to search for available system actions, so
rather than tracking each action in a separate property, store
them in a single map that can be searched in a generic and clean
way.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
In anticipation of showing the system actions in
the search results, it is fit to move action
specific code to its own module in order to
reuse it.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
The current behavior wasn't designed, but was introduced in commit
84efaac52b to work around technical limitations when we were still
using external tools like gnome-screensaver or gnome-session-quit
to handle the actions. Those limitations are long gone, so it makes
sense to make the actions consistent with the corresponding keyboard
shortcuts: Leave the overview when launching an application, and leave
it alone otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=691900
Users already have to trust their OS, so asking whether an OS component
should be allowed to perform an OS operation is odd at best, if not
confusing. Account for this by allowing system components that require a
keyboard grab to work - namely Setting's keyboard shortcuts panel - to
do so without triggering the permissions dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=786146
This drops the requirement that SwitcherPopups need a modifier based
keybinding to work.
The existing behavior for modifier based keybindings is kept but if
the popup is triggered from a no modifiers keybinding, instead of
finishing when the modifier is released, we use a timer that
automatically finishes the popup. The timer is reset on every key
release to allow navigation to happen.
https://bugzilla.gnome.org/show_bug.cgi?id=783550
GWeather now provides us with API to request strings that don't
use sentence capitalization, so we can use it for summaries that
don't start a sentence to make for more natural phrases.
https://bugzilla.gnome.org/show_bug.cgi?id=779873
As in commit b2b2f65 and furthermore it doesn't make much sense to
change the menu item according to the number of connections since all
connections here are of the same type.
https://bugzilla.gnome.org/show_bug.cgi?id=786520
The new control-center shell split wifi configuration from the network
panel, and moved all other devices into a flat list. So instead of
manually spawning the app with the 'show-device' subcommand, we can
now simply launch the appropriate settings panel.
https://bugzilla.gnome.org/show_bug.cgi?id=786520
To make search more efficient, users don't need to move the actual
keyboard focus away from the search entry to activate the first
result. However the shift+f10 shortcut to pop up the context menu
via keyboard still acts on the actually focused widget, which is
the entry. It makes more sense to open the context menu of the
selected result instead, as that's what's highlighted and responds
to keyboard activation.
https://bugzilla.gnome.org/show_bug.cgi?id=675315
Otherwise the smaller icons will try to take too much space since the
texture rendering the icons will be scaled up on HiDPI displays according
to the scale factor, which will push the size of the StBin containing the
texture up, causing them to completely fill the folder's total space.
Explicitly setting the size of the StBin container in this case, in a
similar fashion to what we do when creating the empty placeholders (in
case where there are less than 4 apps in a folder), ensures that each
"cell" of the grid-like widget representing the folder does not take
too much space.
https://bugzilla.gnome.org/show_bug.cgi?id=786145
We need to consider the scaling factor in effect when updating the user's
avatar, and also make sure to update it as well whenever the scaling
factor changes.
https://bugzilla.gnome.org/show_bug.cgi?id=786120
The legacy tray introduced as part of the notification redesign in
3.16 was meant as a stop-gap solution to encourage applications to
move away from the concept of status icons, but it hasn't really
done anything except of getting in the way. Given that the large
majority of apps that still make use of status icons work perfectly
fine without them, we decided that it is time to drop this unloved
bit of UI altogether. Users who still want them (or use one of the
odd cases where an app really depends on the icon) can install one of
various extensions that are available, either based on the XEmbed
support that is still kept around or implementing the DBus-based
StatusNotifier spec.
https://bugzilla.gnome.org/show_bug.cgi?id=785956
Currently the chrome layer decides itself which events on the window
clone should show or hide the chrome, which makes it harder to extent.
Instead, move the decision to the window clone by letting it emit
show/hide-chrome events when appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
Previews are currently limited to at most 70% of the actual window
size. This was done to indicate more clearly that the overview is
active and the window cannot be interacted with. However since then
other indications like the vignette effect have been added, so
artificially limiting the preview size doesn't look necessary anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
Now that only one window title is visible at any time, it no longer
matters if a title extends into other window previews, so we can
always show the full title.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
While the new title position gives the previews more space, they now
overlay the content which may hide valuable information. Address this
by only revealing the title as additional information on hover, like
we do for other auxiliary elements.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
We consider the window previews the primary way to identify a window,
so it makes sense to give them as much space as possible. So in order
to not have title captions take up too much vertical space, overlay
them on top of the preview borders.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
We currently expand the workspace switcher when workspaces are being
used, that is when there are any windows on a non-active workspace.
While this helps with the switcher's discoverability, it does eat into
the space available for window previews. By now the component should
be well established, so we can afford opting for space efficiency and
only expand the switcher while the user actually interacts with it.
https://bugzilla.gnome.org/show_bug.cgi?id=783953
The overview's window picker is primarily about windows, and as the
previews that represent them are more effective the bigger they are,
it makes sense to scale down competing elements; start by reducing
the size of workspace thumbnails on the right ...
https://bugzilla.gnome.org/show_bug.cgi?id=783953
Instead of potentially loading a background mid-way when it changes, and
loading it again for every file monitor event, leverage
CHANGES_DONE_HINT events, which allow us to ignore CREATED and CHANGED
signals from the file monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=747794
About every other situation can do with synchronizing keyboard visibility,
and keyboard layout changes are already handled internally in the Keyboard
object.
A downside of this approach is that once created, there will always be a
Keyboard instance and its full actor hierarchy. Seems reasonable to do that
since we can't tell it won't ever be needed.
https://bugzilla.gnome.org/show_bug.cgi?id=785309
In case where a method- and property name overlap, using the method
is less unambiguous than I thought - mozjs52-based gjs will only see
the method, while mozjs38-based gjs will only see the property. We
are in luck though, and the real property name contains dashes that
allow us to refer to the property in a way that works for all gjs
versions.
https://bugzilla.gnome.org/show_bug.cgi?id=785090
Meson is on track to replace autotools as the build system of choice,
so support it in addition to autotools. If all goes well, we'll
eventually be able to drop the latter ...
https://bugzilla.gnome.org/show_bug.cgi?id=783229
ClutterActor has both a has_pointer() method and a :has-pointer
property (that we represent as 'has_pointer'). So far gjs was
able to deal with the name overlap, but now trying to use the
property will instead test for the availability of the method.
Just avoid the conflict by switching to the method, which is
unambiguous.
https://bugzilla.gnome.org/show_bug.cgi?id=785090
We now cancel animations on override, however we also want to cancel
animations altogether on unmap (that is, when hiding the overview)
to avoid icons swarming into the void.
https://bugzilla.gnome.org/show_bug.cgi?id=736148
Until now we were waiting the animation to complete to allow the user to
make a new animation. This could bring some problems and annoy nervous
users.
Instead of that, destroy clones on new animations triggers and
create a new animation with the new direction.
https://bugzilla.gnome.org/show_bug.cgi?id=736148
The animation needs the icons' final positions, so we currently defer
it to a ::notify::allocation handler; however as starting the animation
during an allocation cycle would trigger a Clutter warning, it is
further deferred to a MetaLater. While this usually works, it is possible
that the allocation is already valid when we connect the signal, in which
case the animation is triggered at a later unexpected time. Switch to
a more robust ::paint handler instead, which also allows us to get rid
of the double-delay.
https://bugzilla.gnome.org/show_bug.cgi?id=736148
Any symbols (including class properties) that should be visible
outside the module it's defined in need to be defined as global.
For now gjs still allows the access for 'const', but get rid of
the warnings spill now by changing it.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
Symbols that are defined with 'let' are no longer visible outside
the module that defines them. To unbreak the code base, define all
non-private properties as global.
https://bugzilla.gnome.org/show_bug.cgi?id=785084
The first time that the session is started, it can happen that the
AT SPI hasn't been correctly initialized, and this results in a crash
when attempting to register the caret or focus listeners.
In order to avoid this, these changes check the result of initializing
the AT SPI, to allow further attempts when it has failed.
https://bugzilla.gnome.org/show_bug.cgi?id=785047
Customization of keycombo actions for strips/rings was lost in the
porting to new incarnation of Wacom support.
The UI here is slightly different, instead of requiring the user to
rotate/swipe in each direction to map each keycombo, the UI will
navigate the user through edition of both options, first one, then
the other.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
Commit 39a840e2c3 added an additional parameter to shell_app_launch().
When adjusting callers, the parameter was also added accidentally to
calls of the confusingly similar g_app_info_launch() ...
Remove those to fix some warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The method currently catches errors that occur when calling the
extension's init() method, but throws itself an error if the
expected extension.js file is missing. The former is pointless
if we expect all callers to handle errors themselves anyway, and
we should avoid the latter if we don't - opt for the second option
and handle a missing extension.js file gracefully.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
While we catch errors that occur when calling init(), enable() or
disable(), the import itself can throw an exception, for instance
if the extension imports an unavailable typelib or tries to draw
in a conflicting library.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Both reloadExtensions() and enableExtensions() are already expected
to catch extension errors. If they don't, this is the bug that
should be fixed instead of catching unhandled exceptions in the
caller.
This reverts commit ff425d1db7.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Those will go away when we port authentication prompts to the new
MessageDialogContent widget, so pick the style classes from there
and adjust individual properties with more specific rules to re-
produce the existing style.
https://bugzilla.gnome.org/show_bug.cgi?id=784985
A lot of our modal dialogs share a similar structure:
[Icon] Some title
Maybe a subtitle
And sometimes even a body for stuff like
longer descriptions.
A dedicated widget with a common style will allow us to significantly
reduce duplication of both code and CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=784985
This is the basic dialog actor implementation, which will allow us to
use the same implementation on the session-global modal dialogs. The
ModalDialog class now uses it underneath, and so do all users of it.
https://bugzilla.gnome.org/show_bug.cgi?id=762083
let trackChrome accept actors that are not children of chrome actors.
this will be useful for the MetaCloseDialog in gnome-shell, which
is already included in the MetaWindowGroup, but needs to be tracked
as chrome for the dialog to receive pointer events on X11.
https://bugzilla.gnome.org/show_bug.cgi?id=762083
The actor allocation will be invalid on CLUTTER_TOUCH_BEGIN, because
it comes together with a CLUTTER_ENTER event that will recalculate
styles, and queue a relayout in result.
The net result is that on CLUTTER_TOUCH_BEGIN, the relayout has been
already queued, so the slider width comes up as 0, and the value ends
up as 1. Later touch events already happen on a validated actor, so
it is corrected. Still, not fun when modifying the volume slider on a
touchscreen.
Having descriptions with multiple lines will clutter
the view and make it more confusing for the user. Apart
from that, it also makes the search result a lot bigger,
potentially losing general vertical alignment.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
The classes extending the SearchResult can now connect
to the 'terms-changed' signal emitted by the SearchResult
class. This signal enables each object to update its
internal description in order to apply the bold style
onto strings that match the search terms.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
In order to prepare for applying the bold style to the part
of the description that matches the search terms, we need
to listen for the signal that announces the fact that the
search terms have changed. Given the fact that the
SearchResults class is aware of the changes regarding the
search terms, the classes that extent SearchResult need
to have a reference to it in order to listen for the
to-be-implemented 'terms-changed' signal.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
Since results are now much more concise and take up less
space, we can use the 'saved' space to provide the user
with more search results for each provider.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
The current separator uses a gradient effect as a separator
between search results. As the mockups suggest, the gradient
separator is no longer needed, in favor of a more simple one,
which is a thin semitransparent line.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
In order to match the current mockups, the providerIcon
class needed to include both the name of the provider
and the label that informs the user about how many more
search results are available for that specific provider.
The latter replaces the plus sign icon that has been
used so far.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
In order to make gnome-shell search functionality fit on
smaller screens, like those of devices, search results
need to take advantage of more horizontal space so that
any extra space can be used efficiently.
In order to do so, change the layout of the ListSearchResult
class from a vertical one, to a horizontal one and also
decrease the padding of the list-search-result-content css
class.
https://bugzilla.gnome.org/show_bug.cgi?id=749957
If the padOsd is given a nonexistent ring/strip, things would fail
badly later when trying to paint a 0x0 StLabel. Just avoid creating
more ring/strip labels than those known by libwacom.
This is unlikely to happen, but seems better to protect against it.
https://bugzilla.gnome.org/show_bug.cgi?id=782033
The porthole will not be destroyed when the scale factor changed.
That makes workspace thumbnail porthole still wrong size in the first
seeing after the scale factor changed.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
PopupMenu needs special-treatment of certain types of menu items,
which it determines via children's _delegate property. However as
the calendar drop-down is very unmenu-ish, we use regular actors
rather than PopupMenuItems and the missing _delegate property
triggers a warning. Just add it as the bare minimum to make
PopupMenu happy.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The destroy effect currently relies on a monkey-patched property
added from the map effect. However on X11 it is possible that we
did no map animation for a window that is destroyed when the shell
was restarted or had taken over from another WM. Just use the real
MetaWindow property to avoid a warning in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
It's possible for updateRegions() to be called before monitors have
been properly initialized. Instead of throwing an error in that case,
just skip the strut computation (that doesn't make sense anyway without
a monitor).
https://bugzilla.gnome.org/show_bug.cgi?id=781471
findMonitorForActor() may be called before the layoutManager gets
to initialize monitors, so make sure the monitor index is in range
to avoid a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
Don't try to access a non-existent engine - it probably makes sense to
use Map() instead of a plain object to track engines in the future, but
for now just add an additional check to shut up a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
We only use lastItem() to reset the history index to the end, so
nobody noticed the utter nonsense in the return value until gjs
started to warn about it. As we don't actually use the value
anywhere, we could just remove it, but the function name implies
that an item is returned, so fix it to behave as advertised.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
We need to track the open-status of indicator menus, but don't want
to hook up signals more than once, so we check for the handler ID
we store on the object. As the property is only defined once we did
set up the signal connection, this check now logs a warning. We
can avoid it by checking for the existence of the property rather
than a particular value.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
To avoid recreating the app menu unnecessarily, the panel checks
whether the menu's current actionGroup already matches the target
one. However as the menu's actionGroup property is currently private,
the test always fails, whoops.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
We currently use "array[index]" to test whether an array has an
element at index before using it. However nowadays gjs warns about
accessing non-existent array elements, so the test itself already
produces a warning. Avoid this by checking the array length before
using an index to access an element.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
While we've always considered it good style to initialize JS properties,
some code that relies on uninitialized properties having an implicit
value of 'undefined' has slipped in over time. The updated SpiderMonkey
version used by gjs now warns when accessing those properties, so we
should make sure that they are properly initialized to avoid log spam,
even though all warnings addressed here occur in conditionals that
produce the correct result with 'undefined'.
https://bugzilla.gnome.org/show_bug.cgi?id=781471
The user list uses the same indication for hover and focus, so it
is possible for two items to be highlighted at the same time. Using
different styling would improve the situation, but only to some
extent - the user would still need to figure out which highlight
corresponds to which activation method. So instead, copy the
approach we use in popup menus and use a single property for
highlights that is updated by both focus- and hover changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772284
It is possible to use the scroll wheel to adjust the volume without
opening the system menu, but there is no feedback other than the
icon itself in that case. To provide a less coarse indication for
the volume level, display the OSD window when adjusting the volume
while the slider isn't visible.
https://bugzilla.gnome.org/show_bug.cgi?id=781028
Since commit 2c070d38, we add a ClickAction to the visible AltSwitcher
button to track long-presses. As a result, we now have two components
that will grab and ungrab the pointer for the button, so to make sure
we don't end up with a stuck grab, we need to release the second's
component grab when the first activates.
Currently we only drop the StButton grab on long-press, we also need
to cancel any initiated long-press on click.
https://bugzilla.gnome.org/show_bug.cgi?id=781738
Some PAM modules say "Press enter to continue" or
whatever. We need to support them.
This commit allows empty responses to PAM questions,
but still requires a non-empty response for username.
https://bugzilla.gnome.org/show_bug.cgi?id=784360
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by skipping a retry if
the operation is cancelled.
https://bugzilla.gnome.org/show_bug.cgi?id=784361
We currently assume that window state changes are accompanied by an
allocation change (triggered for example by the minimize animation).
However this misses the case where a window actor is simply hidden
without any transition, as is the case with the 'show-desktop' action
for instance, so start tracking plain visibility changes as well.
https://bugzilla.gnome.org/show_bug.cgi?id=783975
While the string returned by formatTime() should follow the locale's
text direction as a whole, the actual time part is always expected
to put hours on the left and minutes to the right. It is possible to
enforce that by inserting a left-to-right mark, but so far this is
only done by the Hebrew translation. So in order to not require all
other RTL translations to be fixed individually, just insert the
mark into the returned string ourselves like gnome-desktop's WallClock
code does[0].
[0] https://git.gnome.org/browse/gnome-desktop/tree/libgnome-desktop/gnome-wall-clock.c?h=gnome-3-24#n267https://bugzilla.gnome.org/show_bug.cgi?id=784130
There were some source IDs that were not being reset to zero when
removing the associated sources, resulting on some critical errors
being dumped when _realRecalculateWindowPositions() got called
after that point, via _delayedWindowRepositioning().
Ever since commit b8e29ae8c7
(I think), start up is littered with this message:
Gjs-WARNING **: JS ERROR: could not get remote objects for service
org.gnome.SettingsDaemon.Smartcard path
since gnome-shell is now started before gnome-settings-daemon.
This commit addresses the problem by making the object manager code
not try to autostart its proxy, and instead wait for it to appear.
https://bugzilla.gnome.org/show_bug.cgi?id=772589
If the user fails to enter their password then hits escape, we
jump back to the user list, then ask again for a password in a
garbled screen. this commit fixes that by guarding against the retry
if the fail counter is reset.
This effect will only be created when the StScrollView actor has either
a non-zero vertical or horizontal fade offset defined, so we need to
add a null-check in these two cases before assuming it's there.
https://bugzilla.gnome.org/show_bug.cgi?id=783823
Gjs-Message: JS WARNING: [resource:///org/gnome/shell/portalHelper/main.js 360]: reference to undefined property top.uri
is caused by the URI variable actually being called "url".
https://bugzilla.gnome.org/show_bug.cgi?id=783286
When using an SSH tunnel (through a SOCKS proxy) to funnel all
the outgoing traffic, we need the captive portal to not go through that
proxy, otherwise we can't go through the proxy because we're not
connected to the Internet and we can't go through the portal because
we're not connected through the proxy.
This fixes a blank captive portal window and no error reporting in that
particular configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=769692
The .solid style isn't supposed to apply for modes that don't support
windows, but for this to work we have to update the style on session
mode changes.
https://bugzilla.gnome.org/show_bug.cgi?id=783202
Commit b929320d4 added a toolbar item to force garbage collection,
however it won't be visible for most users, as it uses a non-standard
legacy icon name (the default icon theme dropped it as far back as 2009).
https://bugzilla.gnome.org/show_bug.cgi?id=782982
The fullscreen animation code is now generic enough to handle any
size change animations, so stop limiting it to (un)fullscreen to
get animations on (un)maximize as well.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
Currently, the translation values are set with the assumption that
one of the actors represents a fullscreen window. In order to
generalize it for any size change transition, we can simply swap
the monitor rect with the source or target rect as appropriate,
and translate the actor from the target to the source position by
subtracting the former and adding the latter.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
Since there is already targetRect that represents where the
window is going to move, rename oldRect to sourceRect to
represent from where the window is moving.
https://bugzilla.gnome.org/show_bug.cgi?id=766685
If the popup happens to be mapped beneath the pointer, mutter will now
emit an implicit enter notify event (i.e. not caused by pointer motion).
In this case the switcherPopup still goes and selects the item, which
results in too sensitive alt-tab menus if the pointer happens to be in
the wrong place.
Make highlighting rely on motion events instead, so it always involves
user interaction when triggered by the pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=755164
The solid black top bar we currently use works well for maximized
or tiled windows, as it puts focus on the application content by
blending into the monitor bezel. However it also visually reduces
the screen space, which is particularly noticeable when no window
is located nearby. Having the top bar blend with the background is
a better option in that case, so track window positions and add
some transparency when the top bar is free-floating.
https://bugzilla.gnome.org/show_bug.cgi?id=747163
And merge with the "internal" show/hide() ones. Those functions don't
proxy dbus method calls anymore, so it makes no sense to expose these.
Also, the timestamp is no longer needed as there is a single source for
these events.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
The caribou daemon only gives us focus tracking, which is almost 1:1 with
our own FocusCaretTracker implementation. This means we can entirely
replace the Caribou daemon inside gnome-shell, reducing the Caribou
dependency to just libcaribou, and more specifically the
CaribouKeyboardModel we pull the keyboard models from.
As we still need underneath a CaribouDisplayAdapter to drive the keyboard,
reuse the wayland one, which has been renamed to make it look generic, plus
it will use the virtual input device API from mutter/clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=777342
Some search providers such as GNOME Characters want to copy search
results to clipboard. However, on Wayland, clipboards are only
accessible from applications that have a visible surface on display.
This patch allows a search provider to request the shell to copy a
search result to clipboard when 'clipboardText' is included in the meta
of the result.
https://bugzilla.gnome.org/show_bug.cgi?id=775099
We are moving the icon to be added before the text instead of after,
which is consistent with other menu items in other popup menus, such
as the ones in the system indicator's popup menu.
https://bugzilla.gnome.org/show_bug.cgi?id=782166
This allows passing an optional icon parameter to addAction()
so that a PopupImageMenuItem instance is created instead of a
PopupMenuItem if an icon is specified.
https://bugzilla.gnome.org/show_bug.cgi?id=782166
Add an extra check to setIcon() so that either a GIcon or an string
with the icon's name is handlded, so that we can create menu items
in different ways (e.g. by passing a GIcon created from a resource).
https://bugzilla.gnome.org/show_bug.cgi?id=782166
Some extensions out there may fail to reload. When that happens,
we need to catch any exceptions so that we don't leave things in
a broken state that could lead to leaving extensions enabled in
the screen shield.
https://bugzilla.gnome.org/show_bug.cgi?id=781728
Since 5b3fb024be, the main window is only shown when not launched
with a valid UUID. As GtkDialog isn't meant to be used standalone,
we currently trigger a (harmless but annoying) warning in case
the main window isn't shown; we can avoid the warning by setting
up the preference dialog manually instead of using the GtkDialog
convenience class.
https://bugzilla.gnome.org/show_bug.cgi?id=781545
So far, the GWeatherInfo was given the enabled weather providers
as a parameter, at construction time. Because of the way in
which libgweather was designed, setting the providers right from
the beginning enabled libgweather to use them internally in order
to update its state. Updating the internal state is only relevant
when there is a valid location set, which is not guaranteed at the
time when the GWeatherInfo object is constructed.
In order to fix this, enable no providers at construction time and
only set valid providers after setting a valid location.
https://bugzilla.gnome.org/show_bug.cgi?id=780404
Recently Music gained a flatpak manifest inside the repo in bug 779905.
However that requires the desktop file to be properly named like
DBUS addresses are.
This patch renames the old Music desktop file to the new one.
https://bugzilla.gnome.org/show_bug.cgi?id=780157
Add a new D-Bus method for setting the monitor labels. This new method
takes connector names instead of output ids for associating with actual
monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=777732
Since the workarea and margins are both in pysical pixels dimensions (we
fetch margins from Clutter, not from the theme), but the CSS expects
logical (scaled) pixels, unless we consider the scale factor when
setting max-height, it won't work on a HiDpi display.
This fixes missing scrollbars when the calendar popup is full on HiDpi
displays.
https://bugzilla.gnome.org/show_bug.cgi?id=753305
Generalizing menu toggling via keyboard in commit 1d58ea25ab
fixed keynav in many places, but it turns out that it also adds
unexpected interactions in some cases where the source is not
button-like, as for example the entry context menus provided by
ShellEntry. Commit e33c68a415 fixed one case, however it is still
possible for plain enter/space to unexpectedly trigger the menu
if the entry itself doesn't consume the event, which is the case
when ClutterText:editable is false. However for a general fix, it
makes more sense to consider the source actor's :reactive property
and disable toggling menus via keyboard when they cannot be toggled
by pointer either - expecting non-editable entries to be non-reactive
as well seems like a reasonable assumption, and indeed all our code
follows that pattern.
https://bugzilla.gnome.org/show_bug.cgi?id=758873
Instead of using directories that we'll destroy when done, use the new
"ephemeral" data manager feature, through the JavaScript version of:
webkit_web_context_new_ephemeral()
We also throw an error on startup, in the logs, if WebKitGTK is too old.
https://bugzilla.gnome.org/show_bug.cgi?id=780453
Our weather integration should follow GNOME Weather as closely as
possible, which means that we should respect its location permission
rather than using our own or none at all (which we can as a "system"
component and as geoclue's authorization agent).
https://bugzilla.gnome.org/show_bug.cgi?id=780252
It doesn't make sense to tie the proxy code for flatpak's permission
store to the location indicator, just because that was the first
component to use it, so split it into a separate module.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
The setting to globally disable location settings altogether isn't
handled by the geoclue service itself, but by the authorization
agent. This means that:
- it doesn't apply to system components
(which gnome-shell is now considered[0])
- it doesn't apply once the geoclue connection
has been authorized
However users can reasonably expect that we won't use location services
after they disabled them, so handle the setting explicitly.
[0] https://cgit.freedesktop.org/geoclue/commit/?id=a4cef6c0ad08https://bugzilla.gnome.org/show_bug.cgi?id=780252
We currently use automatic location for weather forecasts if the
corresponding Weather setting is set, however we should take other
factors into account as well:
- whether location services are enabled at all
- whether Weather has been authorized to use them
In preparation of these changes, track the setting's value in a
separate property and make _useAutoLocation a getter, so we can
extend it with additional conditions easily.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
Setting GWeatherInfo:location to null helpfully doesn't mean
"no location", but "NYC". This obviously isn't what we want
to show users, so track the location validity separately and
consider it when updating the label shown to users.
https://bugzilla.gnome.org/show_bug.cgi?id=780252
When using the 'disable-lock-screen' setting to lock down the screen
lock, the expectation is that users cannot lock the screen. However
as it turns out, all the setting currently does is hiding the lock
button in the system menu and making the lock settings in the privacy
panel inactive. That means that if the 'lock-screen-enabled' setting
isn't disabled and locked down as well, we will just continue to
lock the screen on inactivity - not to mention the keyboard shortcut
that isn't subject to that setting anyway.
Instead of expecting administrators to hunt down every possible way
of locking the screen and disabling it individually, we can easily
handle all cases by refusing to lock the screen when disabled by the
lockdown settings.
https://bugzilla.gnome.org/show_bug.cgi?id=780212
Dragging and dropping app icons is expected to work anywhere over a
workspace, however overlaid elements are added to a separate hierarchy
and can thus block valid drop targets. This wasn't much of an issue
while we had just the window title, but since the addition of the
focus border, drops on window previews stopped working entirely.
Fix this by hiding all non-reactive overlay elements from picks.
https://bugzilla.gnome.org/show_bug.cgi?id=737166
We rely on the service to detect whether a fingerprint reader is
present. It is fine to not support fingerprint authentication
when the service is missing, but currently we don't handle this
case at all and end up with a non-functional login screen.
https://bugzilla.gnome.org/show_bug.cgi?id=780063
Currently when the wifi selection dialog is open when the screen lock is
activated, the dialog remains visible above the shield. This is clearly
broken, so close the dialog automatically on session mode changes if the
mode doesn't allow settings (as changing the access point is arguably a
user setting).
https://bugzilla.gnome.org/show_bug.cgi?id=780054
The critical hint is meant to be used for notifications that must not
be missed - running out of battery being the prime example - so it
makes sense to ignore the policy in that case and make sure to always
show them to the user. This is consistent with blocking normal
notifications while showing a fullscreen window, but letting critical
ones through.
https://bugzilla.gnome.org/show_bug.cgi?id=779974
Whenever there's more than one pad in the same group (eg. Wacom ExpressKey
Remotes), show a popdown menu to allow configuring those extra pads.
Devices are hot-pluggable, so the popdown menu will update its state
whenever pads are added/removed.
Also, allow to quickly change between pads by switching to its OSD by
just interacting with them. Always given they are in the same group.
https://bugzilla.gnome.org/show_bug.cgi?id=779986
Telepathy's role has been diminishing continuously over the last
couple of years, so while chat integration is a nice feature for
those who use it, it is hard to justify keeping it as a hard
dependency. To address this, split out the component from the
client so we can handle missing typelibs gracefully by not
providing any chat integration.
https://bugzilla.gnome.org/show_bug.cgi?id=779878
If GeoClue is not responding for some reason, the callback of
Geoclue.Simple.new would not get called, meaning that _gclueFailed
remains false. This is preventing the fallback to the most recently
used location in gnome-weather, because it requires _gclueFailed to be
true (or auto-location to be disabled). So neither code path sets a
location and the libgweather default (New York City) is being used
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=779898
For most notifications, banners are suppressed while the monitor
that is used to display banners is in fullscreen. With the old
message tray at the bottom, this used to be the bottom-most monitor,
but nowadays it's always the primary one, so update the corresponding
code to use the correct monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=779819
The telepathy integration was written at a time where gjs didn't
allow to inherit from GObject classes, which is why we needed a
C helper class. This hasn't been the case for a while now, so cut
out the middle man and implement Tp.BaseClient directly.
https://bugzilla.gnome.org/show_bug.cgi?id=771721
Rename the signals which have been used to handle XDnd events to more inclusive
ones. So that these signals can be used to handle the DnD events in Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
Commit c6f22826cf added a call to update() to refresh the notification
time for sent and received messages. However as it omits the bannerMarkup
parameter, escaped text like ''' now makes it through verbatim.
Rather than adding the parameter, we can just refresh the timestamp in
the existing update() call to fix the issue - it means the notification
timestamp is only refreshed for received messages, but that reflects
the text shown in the notification, which isn't updated for sent
messages either.
https://bugzilla.gnome.org/show_bug.cgi?id=779435
Media notifications currently always show the forward and backward
buttons as clickable, regardless of whether the corresponding action
is available or not. Media players usually address this by rendering
controls insensitive in this case, so do the same here.
https://bugzilla.gnome.org/show_bug.cgi?id=773884
Without the boxy background, event messages look a bit plain and
unaligned with other messages. Adding an icon addresses this,
however as repeating the same icon over and over again in case of
many events would be rather noisy, only show it for the top event
as in the mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Update the notification style according to the latest mockups:
- make notification icons smaller and prefer symbolic variants
- remove background box when not hovered/focused
- increase spacing between elements
- use normal text sizes
https://bugzilla.gnome.org/show_bug.cgi?id=775763
For notifications in the message list, it is usually less relevant
when exactly it occurred, but how long ago. So rather than showing
the exact time and expecting the user to figuring out the timespan
themselves, change the format to something human readable.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Currently the secondary actor (if set) and the close button are
exclusive, that is the latter replaces the former on hover. As
the swapping feels rather busy and there's no real reason both
cannot be shown at the same time, keep the secondary actor always
visible.
A welcome side effect is that it no longer needs to be placed at
the end, so we can move the notification timestamp right next to
the corresponding title.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
The section titles usually don't provide a lot of value - messages
themselves are usually pretty unambiguous about their type, and
having a hidden shortcut to some settings panel or application isn't
essential either - except when showing the selected date when browsing
other days, as it adds context to the listed events. Based on that,
remove the section title as a general MessageListSection feature and
move it into the EventsSection, where we only show it when it is useful.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
We will eventually remove section titles from the message list to
reduce visual noise and give the actual information provided by
the messages more space. So in order to not lose the ability to
mass-dismiss messages, the latest mockups spot a "Clear All" button
at the bottom - implement that.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
The latest mockups contain a button to clear all sections at once.
As some elements cannot be cleared, we need to provide that information
to avoid offering an action that has no effect.
https://bugzilla.gnome.org/show_bug.cgi?id=775763
Weather conditions - at least as far as online services are
concerned - don't usually change in a couple of minutes.
So when updating shortly after a previous update, assume
the current conditions are still valid and trigger an
update without showing a loading indication. This should
help a bit with not getting stuck permanently in loading
state when on a shitty network.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
Similar to the Clocks integration we've had in the date+time drop-down for
a while, the designs have called for a similar section that integrates
GNOME weather as well. Use the WeatherClient added in the previous commit
to implement that section and add it to the popover.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
In preparation of integrating GNOME Weather, add a helper class that
retrieves weather information according to Weather's configuration
if the application is installed.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
In order to avoid distracting popup size changes while browsing
other dates, we freeze the size to the last size request. However
in case of more complex size negotiations - wrapping or ellipsizing
labels, scrollable elements etc. - there's a chance of stray calls
to get_preferred_width/height() that are not used for the actual
allocation. If such a call happens to be the last size request
before the layout is frozen, the saved size will be wrong. To fix
this, save the allocated size rather than the requested one.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
We want the width of the calendar column to be determined by the
calendar, other elements should adjust their allocation accordingly.
However neither ellipsization nor wrapping will kick in unless the
parent's width is restricted, so use a small custom layout manager
that enforces the desired behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=754031
As the telepathy integration picks up existing channels on startup,
ChatNotifications are another case where the real time the message
was received may be before the time it is picked up by the shell.
While this is less of an annoyance than restored GNotifications, as
it generally only affects restarts from the run dialog, it's an
easy fix now ...
https://bugzilla.gnome.org/show_bug.cgi?id=775799
GNotifications are persistent until dismissed or withdrawn, including
across restarts. As we show the time a notification was received in the
calendar, we need to include that information when serializing the
notification in order to be correct.
https://bugzilla.gnome.org/show_bug.cgi?id=775799
Since the last notification redesign, we've been showing the time a
notification was received in the calendar drop-down. However as the
time is in fact added by the NotificationSection, it is actually the
time a notification was added to the list. Usually that difference is
not significant, except when previously received notifications are
restored on startup.
In order to be able to address those cases, we need a time that is
associated with the notification itself, so add a datetime property
that defaults to the current time, but may be set from an optional
parameter as well.
https://bugzilla.gnome.org/show_bug.cgi?id=775799
When gnome-clocks is installed, there is currently a race between the
GSettings schema being added to the database and the world clocks
session trying to use it. The prize if we win that race is an abort
in GIO, so use the newly added AppSettingsMonitor skip the race
altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=766410
When integrating with optional components like Clocks, it is not safe
to access their GSettings right after the application became visible
to the AppSystem:
Installation is usually not atomic, so the .desktop file may appear
before the settings schema, in which case Gio will abort due to an
"invalid" schema ID.
To address this, add a small helper class that wraps the settings
access in a safe way.
https://bugzilla.gnome.org/show_bug.cgi?id=766410
The display configuration now exposes a setting to automatically
shift the display color at nighttime. As there are cases where
disabling the filtering temporarily is useful, it makes sense to
expose the feature in the system menu for quick access.
https://bugzilla.gnome.org/show_bug.cgi?id=741224
Update according to the latest mockups:
- don't use a border around the list as specified
by the latest HIG version
- use more generous spacing between controls
- allow extension descriptions to take up two lines
- drop GNOME branding from the window title
- make the app name consistent with the window title
https://bugzilla.gnome.org/show_bug.cgi?id=778672
While the extension prefs tool is not meant as the primary way for
users to configure extensions - that will be Tweak Tool - it still
doesn't hurt to expose the extension kill switch to easily turn
extensions back on after a session crash.
https://bugzilla.gnome.org/show_bug.cgi?id=778664
When gnome-shell fails to start on login, gnome-session tries to
re-launch it again with all extensions disabled. This is currently
implemented by clearing the list of enabled extensions, which means
the user needs to re-enable their extensions manually again.
To make this process less annoying, add a single 'kill-switch' setting
gnome-session can use without interfering with the user setting.
https://bugzilla.gnome.org/show_bug.cgi?id=778664
On systems that support both shutdown and suspend, the latter operation
is currently only accessible via pressing the Alt key. As using the
keyboard may be inconvenient or simply not possible (e.g. on touch),
allow switching between alternatives via long-press as well.
https://bugzilla.gnome.org/show_bug.cgi?id=721173
We currently assume that if a .desktop file has been renamed (that
is, it is in our rename list), the updated ID will be used. That
assumption was mostly sound when the list contained only GNOME apps
following the same release cycle as gnome-shell, but as applications
with less ties to the GNOME schedule adopt the reverse DNS notation,
it becomes more likely for apps to appear in the list before actually
being updated on the system. Handle this case by only renaming IDs
for which the replacement can be resolved to an existing application.
https://bugzilla.gnome.org/show_bug.cgi?id=745626
The permissions hash is initialized after consulting the permission
store, however the lookup is skipped for requests that cannot be
resolved to an application, resulting in an error when accessing
the uninitialized hash for saving. Just make sure that the property
is always initialized to avoid that error.
https://bugzilla.gnome.org/show_bug.cgi?id=778661
GJS implements a basic signal system that allows monkey-patching
JS objects with signal methods resembling the GObject ones. However
it's clearly not a good idea to replace the actual GObject methods,
so use the proper GObject facilities when inheriting from GObject.
https://bugzilla.gnome.org/show_bug.cgi?id=778660
Items were inserted correctly but the synchronisation was lost if the
name of a connection was changed. Simply making sure the position is
correct after a connection is updated fixes the issue.
Reported-by: Oliver Haessler <ohaessle@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=778686
Mutter now provides versioned libraries and pkg-config files, meaning
an application using libmutter and friends need to depend on a specific
version of the API.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
It's weird if after you select a username from the user list, there's
a password already filled in.
This commit disables at that feature for the login screen
(but keeps it in tact for the unlock screen)
https://bugzilla.gnome.org/show_bug.cgi?id=766139
This adds a security icon (either secure or insecure) to the portal
helper's title bar. As soon as a part or all of the page and its content
is served insecurely, the icon shown will be a broken padlock.
https://bugzilla.gnome.org/show_bug.cgi?id=749197
The following code is a syntax error in ES6:
let a = 'something';
let a = 'other thing';
Previously GJS would silently accept this code, but in the next release the
SpiderMonkey JS engine will be more ES6-compliant.
https://bugzilla.gnome.org/show_bug.cgi?id=778425
Per ES6, a variable declared const should only be valid inside its lexical
scope. Previously, GJS would accept this code, but that will change in the
SpiderMonkey JS engine in the next release of GJS.
https://bugzilla.gnome.org/show_bug.cgi?id=778425
Using a MetaWindowActor's shaped texture as the source for window
clones means that if there are further MetaSurfaceActor children
(e.g. a wayland client using sub-surfaces) they don't get cloned.
This obviously wasn't an issue until wayland clients introduced the
possibility of having multiple MetaSurfaceActors under a
MetaWindowActor but there's no fundamental reason we can't clone the
toplevel actor.
WorkspaceThumbnail.WindowClone is the one class that was already using
the MetaWindowActor instead of the texture although it seems to have
been an unintended change in commit
8b99617513.
https://bugzilla.gnome.org/show_bug.cgi?id=756715
We have no guarantees on the number of ::size-changed signals that we may
receive, so the _sizeChangedWindow handler may run multiple times, which
leads to multiple calls to meta_plugin_size_change_completed(). So double
check the actor is not already being animated in the _sizeChangedWindow
handler to avoid reentrancy.
https://bugzilla.gnome.org/show_bug.cgi?id=777784
The title of the window should not be in control of a potentially
hostile hotspot provider, so only set the subtitle to be that of the
page, the main title will stay the same.
The subtitle will also be set to a URI, so that the hotspot cannot be
used to control the title shown in our UI.
Helps https://bugzilla.gnome.org/show_bug.cgi?id=749197
Even though the window is maximised when created, the window is still
resizable. This avoids making the window smaller than usable. If the
screen is smaller than the minimum window size, the maximise should make
it fullscreen and non-resizable.
https://bugzilla.gnome.org/show_bug.cgi?id=735233
Ever since commit b8e29ae8c7
(I think), start up is littered with this message:
Gjs-WARNING **: JS ERROR: could not get remote objects for service
org.gnome.SettingsDaemon.Smartcard path
since gnome-shell is now started before gnome-settings-daemon.
This commit addresses the problem by making the object manager code
not try to autostart its proxy, and instead wait for it to appear.
https://bugzilla.gnome.org/show_bug.cgi?id=772589
If the call to settings.get_connection_by_path in
ensureActiveConnectionProps returns null, we'll hit a JS error here.
Seems to happen always when activating a VPN connection. Avoid that.
Giovanni says:
"I believe this is papering over an existing bug, but it's possible for
settings.get_connection_by_path() to legitimately return null (if the
connection is owned by a different user and invisible to the current
one), so the fix is correct anyway."
https://bugzilla.gnome.org/show_bug.cgi?id=759793
When a GNotification has the same ID as a previous one, it should
be shown as a new notification after withdrawing the old one.
However for this to work, we must not destroy the corresponding
source if withdrawing the old notification lets the notification
count drop to zero, so make sure the source is kept alive until
the replace operation has completed.
https://bugzilla.gnome.org/show_bug.cgi?id=775149
Clicking on calendar notifications might block till the DBus request times
out if the application being poked happens to be non-responsive. Perform
this asynchronously so we don't block if that is the case.
If an onComplete handler is passed to animate(), it is set to run at
the end of the animation via the icon grid's ::animation-done signal.
Currently the signal is connected after starting the animation, with
the result that the handler doesn't run when the animation completes
immediately (because there are no icons to animate). Fix this by only
starting the animation after connecting the signal.
https://bugzilla.gnome.org/show_bug.cgi?id=774381
We currently assume that the current view matches the 'app-picker-view'
setting. While that is usually the case, there is one notable exception:
While there isn't sufficient usage data (yet), we show all applications
instead of an empty frequent view regardless of the setting. We should
animate the actually visible icons in that case, not the (non-existent)
ones from the hidden frequent view.
https://bugzilla.gnome.org/show_bug.cgi?id=774381
Users are currently experiencing intermittent (and hard to debug) TLS
errors when loading the portal authentication page. This could be
caused by using http://www.gnome.org/ for our connectivity checks
because it redirects to HTTPS.
We can completely remove TLS from the equation by not using HTTPS.
http://nmcheck.gnome.org/ is a good choice because it doesn't redirect
to HTTPS and was created for NetworkManager's connectivity check.
https://bugzilla.gnome.org/show_bug.cgi?id=769940
Wayland clients can request their surfaces to be fullscreened before
commiting a buffer which means that we need to handle fullscreen
requests for which the old size is 0x0, preferably without warnings.
Since the mapping animation also runs for these windows, we can simply
bail out and ignore the fullscreen size change.
https://bugzilla.gnome.org/show_bug.cgi?id=770345
Wayland clients are in control of their window size so the existing
mutter plugin API, which assumes size changes are synchronous, doesn't
work for them since when our size-change handler runs the MetaWindow's
size isn't final yet.
To fix this, the mutter plugin API was extended with a size-changed
vfunc that lets us know when the MetaWindow size has actually
changed. This way we can make the window snapshot and get the old
window size on the existing size-change handler and later, on the new
size-changed handler, get the new size and start the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=770345
Our animation code not only relies on the animation being loaded
(which we handle), but also on having at least one frame - otherwise
the computation of the next frame index will turn up NaN through
division by zero. Guard against this case by treating empty animations
as not loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=774805
The top bar's network menu only supports a subset of device types
supported by NetworkManager. While not having lesser used options
in the menu itself is perfectly reasonable, not showing any network
icon at all in the top bar when the system is fully connected is
weird.
https://bugzilla.gnome.org/show_bug.cgi?id=773890
Any network devices appear as top level items in the system status
menu, so on system with an unusually high number of devices, the
menu can end up exceeding the available screen height. While this
is a corner case, leaving important system actions unreachable is
bad. The system menu does not lend itself to scrolling, so handle
this case instead by summarizing sections ("n connections") where
the number of devices exceeds a threshold.
https://bugzilla.gnome.org/show_bug.cgi?id=773892
Currently the cache is built once when the first VPN request is
handled, so plugins that are installed or uninstalled after that
aren't picked up. Fix this by invalidating the cache on changes
to the plugin directory.
https://bugzilla.gnome.org/show_bug.cgi?id=773893
commit 1d58ea25ab changed the
popupMenu code to handle key presses on source actors directly.
This fixed keynav into the session gear menu at the login screen.
Unfortunately, it also causes spurious pop ups if a modifier happens
to be held down.
This commit checks for modifiers and short circuits the up front
key handling if any are found.
https://bugzilla.gnome.org/show_bug.cgi?id=740043
This is an implementation of the pad OSD that's been previously
present in gnome-settings-daemon. Since things are moving closer
to the compositor, it makes sense to have this implemented as shell
UI.
https://bugzilla.gnome.org/show_bug.cgi?id=771067
The lightboxes used for screen blanking are created during initialization
and shown each time the screen should blank. During the (potentially long)
time where the lightbox is hidden, any actor could be raised above the
lightbox - in particular any popup menu raises itself to the top when
opened. To not exclude those elements from screen blanking, raise the
lightbox every time it is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=773875
We currently reload animated backgrounds on timezone changes, but
there are other cases where the time can change unexpectedly and
the background no longer matches the time of day. One case we can
easily handle is when coming back from suspend, so do that.
https://bugzilla.gnome.org/show_bug.cgi?id=773265
Since commit 67615a0cbc, any printable key can be used to lift the
screen shield rather than just escape/enter/space. While this is
convenient for unlocking where the input is forwarded to the password
entry, it is potentially dangerous when the screen is inactive but
not locked: If the user types her password, the first character will
lift the shield and the remaining input will go to the focused window.
To prevent this from happening, only allow printable keys when the
screen is actually locked and restrict the key presses that lift the
shield to the original set of escape/enter/space otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=773328
It will only show up when a discrete GPU is available (detected through
the switcheroo-control D-Bus service), and the application hasn't
alreayd been launched.
Note that this will not currently work for D-Bus activated applications,
eg. the menu item will be available, but the environment variable will
not be passed through to D-Bus to use when launching the application.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
And adapt existing callers to the new API. This will allow us to
implement a way to launch applications on the discrete GPU for systems
where an "Optimus" system exists.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
Apparently importers for the 'same' path are shared, even when the
relative paths resolve to different absolute ones. Until this bug
is fixed properly, we can work around this by expressing the current
extension path as the UUID relative to the parent directory.
https://bugzilla.gnome.org/show_bug.cgi?id=772386
You can define a new importer object by importing a subdirectory in GJS.
This is undocumented, but it is likely to at least hold until the whole
thing moves to ES6 modules, after which we'll be able to do this purely
in JS with Reflect.Loader.
Since this was the only thing the ShellJS library did, we can remove it
altogether.
This allows us to discontinue use of the gjs-internals-1.0 embedder API.
https://bugzilla.gnome.org/show_bug.cgi?id=772386
When the user gets long failure messages from pam, the authPrompt
message label will clip the message and ellipsize with '…'.
This commit turns off ellipsization from the label, so it will
properly wrap.
https://bugzilla.gnome.org/show_bug.cgi?id=764445
If Bluetooth is on but there aren't connected devices, the status in the
menu reads "Not in Use". This is potentially confusing: it's a negative
statement, even though Bluetooth is on. It also sits uneasily (and looks
even more confusing) next to the submenu item "Turn Off".
Changing the string to "On" is better.
https://bugzilla.gnome.org/show_bug.cgi?id=756432
This allows us to pass metadata fields besides the message
to log. So, if the log() call is made from an extension,
pass the extension name and UUID to the logger.
This is useful for extension developers to debug their code
as well as to instruct their users to send debug info to them
by running something like this:
journalctl GNOME_SHELL_EXTENSION_UUID=<extension@uuid>
https://bugzilla.gnome.org/show_bug.cgi?id=770717
Currently it's assumed only an extension can call this method. However
it can be useful if any part of the shell want to know if it was invoked
by an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=770717
NM upstream would like to reduce periodic scanning, and that means
that clients should request scans themselves while their WiFi list
is open. Similar to the Windows and macOS WiFi dialogs/lists.
https://bugzilla.gnome.org/show_bug.cgi?id=767918
We currently rely on the "monitors-changed" signal of LayoutManager to
relayout the OSD window. That is not enough, since the scale factor also
changes the way the OSD window is sized, and that can be updated after
"monitors-changed" has been received.
The visual effect is that under some circumstances, the OSD window will
have the wrong size under HiDpi.
This commit fixes the issue by triggering another relayout when the
scale factor changes.
https://bugzilla.gnome.org/show_bug.cgi?id=772723
Similar to bug 667552 for the app switcher, attached modal dialogs
can result in an unexpected window order in the window switcher:
Selecting a window with an attached dialog will focus the dialog
instead, but as the dialog itself is ignored in the window list,
its last-used timestamp is not taken into account for the position
in the MRU list. Fix this by fetching the list of all NORMAL windows
and filter out skip-taskbar windows ourselves, while making sure that
windows appear in the position of their attached modal dialog where
appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=747153
We only connect to the corresponding property notifications after both
Client and RemoteSettings are ready, so we may miss the initial signal
emission. Make sure to pick up the connections in this case to fix the
network indicator not showing up.
https://bugzilla.gnome.org/show_bug.cgi?id=772249
Similar to windows on another workspace, selecting a minimized window
doesn't look quite right - the selected window disappears, then animates
back in. Fix this by adding support for skipping the next effect to the
wm and use it to bypass the unminimize animation.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Both 'cycle-group' and 'cycle-window' shortcuts allow cycling through
windows on all workspaces. While this works, it looks quite broken
since we started showing clones for highlighting: the selected window
vanishes (when its clone is destroyed), then slides back in with its
workspace. Instead, slide the selected window to its workspace like
we do for the 'move-to-workspace-*' shortcuts.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
Commit 3171819c improved window cycling by using a dedicated to clone
for highlighting rather than activating all cycled windows. Original
window actors are hidden while its clone is showing, and shown again
afterwards, however the latter is wrong for actors that are not supposed
to be visible (for example where the window is minimized, or on a different
workspace). Fix this by properly syncing the actor's visibility instead
of showing it unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=771536
ScrolledWindow changed its allocation behavior, and the extension
list only takes up the minimum width rather than the available
width as intended. To get the previous behavior back, we need
to set the newly added :propagate-natural-width property ...
https://bugzilla.gnome.org/show_bug.cgi?id=771391
If the user clicks Not Listed? to enter ask for username mode, clicks
cancel, and then attempts to log in via the user list, the user will see
"Authentication failed" after correctly typing the password, and then
will become stuck in an empty screen with just the gray noise background.
The problem is, we forgot to disconnect from the signal that's waiting
for the next button to be pressed on the username entry screen. Since
the signal handler that executes here is expecting the username to be
input, and isn't prepared for us to have switched back to user list,
various bad things happen. We try to start two gdm-password
conversations at once, for instance, one using the user's password as
the username. I stopped investigating here, because it's easy to fix by
disconnecting from the signal at the right time.
https://bugzilla.gnome.org/show_bug.cgi?id=770328
Since commit 82950ecea, we acknowledge pending messages when closing a
chat notification for a channel we are handling to prevent the channel
from popping up again immediately. While this isn't an issue for channels
we don't handle, the unread messages of the destroyed notification are
still considered for the messages indicator in the top bar, which is
clearly confusing (in particular when we end up showing the indicator
without any notifications in the list). As it's arguably correct to not
meddle with a channel handled by someone else, just reset the cache of
pending messages to address this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=770888
Mutter's plugin destroy event doesn't happen if a window is hidden
when it gets unmanaged so we also need to handle the
MetaWindow::unmanaged signal to check whether the parent should
dimmed.
https://bugzilla.gnome.org/show_bug.cgi?id=752524
meta_window_foreach_transient() iterates through all transients of a
window, not only direct transients. This means that simply checking if
a transient is an attached dialog isn't enough because it might be a
non-direct transient for the window we're checking, in which case we
don't want to dim the window.
In particular this fixes windows not getting undimmed when they have
more that one level of transient children and the direct transient gets
destroyed. In that case we would still find at least one non-direct
transient child and decide to keep the window dimmed.
https://bugzilla.gnome.org/show_bug.cgi?id=770163
Commit bd6e7f14d1 reimplemented the cycle keybindings to
fix cycling between more than two windows, but the approach
of highlighting cycled windows by actually focusing them has
the drawback that cycling messes up the MRU order of windows.
To fix this, only change the window focus when the operation
finishes, and use a dedicated actor that draws a border around
a window clone for highlighting.
https://bugzilla.gnome.org/show_bug.cgi?id=771063
There's no particular reason for this actor to be reactive and thus
preventing input events to reach actors underneath, e.g. quickly
clicking on something while the popup isn't yet finished animating
out.
https://bugzilla.gnome.org/show_bug.cgi?id=770382
Have it notify properly of changes to the current input source, as
well as exposing those in get_groups().
The support for virtual keyboard events has been replaced by
ClutterVirtualInputDevice, which can be thought of as the equivalent
to the XTEST devices in X11.
https://bugzilla.gnome.org/show_bug.cgi?id=765009
If a sandboxed app requests access to some system resource (camera,
microphone, location), the portal frontend needs to ask the user
for permission. In GNOME, we want this to be a system modal dialog,
so provide an org.freedesktop.impl.portal.access implementation
that exposes a generic system modal permission dialog on the bus.
https://bugzilla.gnome.org/show_bug.cgi?id=768669
We currently use the :active pseudo class to mark the selected day
in the calendar. Whenever the selected date changes, the class is
added to the corresponding button and removed from all others.
However when the selected date doesn't change (i.e. when clicking
the already selected date), the buttons are not updated and the
use of the :active class conflicts with StButton's builtin handling
of the class - the class is removed on the button up event and the
button is deselected.
Fix this by simply using a different pseudo class.
https://bugzilla.gnome.org/show_bug.cgi?id=746867
The last patch fixed marking days in the calendar where all
events are ignored, but it doesn't pick up the change when
an event is hidden. Emit an appropriate change notification
to fix this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=768538
Ignoring events is currently implemented in the message list's
event section, which means that the calendar does not consider
ignored events when marking days with events. In order to fix
this, move the handling of ignored events to the event source,
which is shared between both components.
https://bugzilla.gnome.org/show_bug.cgi?id=768538
Commit 9b07ce1d0d broke the code that keeps the OSD window square.
Use that opportunity to move away from the hack of setting the
min-height style property from code and adjusting the width on
allocate, and implement a proper constraint instead.
https://bugzilla.gnome.org/show_bug.cgi?id=768317
ClutterActor:width is a floating point property, so it will not be
automatically rounded to non-fractional values that properly align
to pixels. To fix the resulting blurriness, add explicit rounding.
https://bugzilla.gnome.org/show_bug.cgi?id=768317
Commit 9b07ce1d0d changed the OSD window's level bar to be a regular
actor instead of a custom drawn bar. The bar actor's width depends on
both the configured level (e.g. 40%) and the available width, however
the width is currently only updated when the configured level changes.
Fix that by properly considering changes to the parent's width as well.
https://bugzilla.gnome.org/show_bug.cgi?id=768317
Commit c39ffa111 moved the signal handling from the controls- to the
background-group to enable scrolling on non-primary monitors.
However this broke scrolling on reactive overview elements as the
workspace switcher, as they're not descendants of the background.
To fix, move scroll-event handling to the overview group itself,
which is the common ancestor of all overview elements.
https://bugzilla.gnome.org/show_bug.cgi?id=768316
When we restart, we need to update the struts for the screen before
we enter the main loop, or maximized windows will get resized to the
size of the screen without struts, then resized back.
A workaround is needed for a Clutter bug that occurs when we get
the size of an actor before the first paint of the stage.
https://bugzilla.gnome.org/show_bug.cgi?id=761566
The memory which MetaBackground resides is freed automatically, when its
wrapper object Background is freed by garbage collection. But because the
memory for MetaBackground is huge, changing the background or changing the
background mode repeatedly makes a lot of memory to be in use until garbage
collection runs.
This patch frees the MetaBackground object explicitly when its
MetaBackgroundActor is destroyed which is the moment that the memory in the
object is not used anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=766353
Signed-off-by: Hyungwon Hwang <hyungwon.hwang7@gmail.com>
This isn't a performance critical actor and the NVIDIA driver discards
offscreen buffers in some cases which would require us to go through
extra hoops to handle here which isn't worth it.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
It is odd to switch workspaces on the primary monitor when panning on
a monitor without workspaces, so reject the gesture on non-primary
monitors when workspaces-only-on-primary is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
It is odd to switch workspaces using the scroll wheel when the pointer
is on a monitor without workspaces, so only handle scroll events on
non-primary monitors when workspaces-only-on-primary is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
We allow activating a workspace by clicking it when we know that
the user did not try to select a window and missed (namely: the
workspace is empty). However we currently always check for an
empty workspace on the primary monitor, which doesn't make sense
when the click happened on a different monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
Both the Overview::scroll-event and actions added via addAction()
are meant to work anywhere in the overview, but for now only work
on the primary monitor. Move the handling to the background group
that is known to span all outputs to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
The stack was used to overlay a message indicator over the overview
group. That indicator is long gone, so there's no longer a need for
an intermediate actor in the hierarchy.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
Initializing the upper bound to zero means that on panning we'd start
scrolling from the first workspace even if the current workspace when
entering the overview was different since StAdjustment clamps the
value to be inside bounds.
https://bugzilla.gnome.org/show_bug.cgi?id=766883
The underlying logind API does not only indicate whether suspend is
available, but also whether the user is eligible for executing the
operation without further authentication. This information can be
relevant, so pass it to the callback.
https://bugzilla.gnome.org/show_bug.cgi?id=725960
If the source actor is destroyed while the popupMenu is shown -- this
can happen if a non favorite application was closing or crashes -- the
menu actor is improperly destroyed.
This makes the popupMenu close first and does a clean ungrab instead.
https://bugzilla.gnome.org/show_bug.cgi?id=757556
The various switcher keybindings are handled identically, except for
the popup that is shown; update the code to reflect that instead of
duplicating the code again and again.
https://bugzilla.gnome.org/show_bug.cgi?id=730739
The code to handle cycling through windows without showing a popup
was removed from mutter a while ago, which left the corresponding
keybindings mostly broken (i.e. they now only switch between two
windows). With the various switch-foo keybindings handled by the
shell, it is now easier to take over the cycle-foo keybindings as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=730739
Logind recently got support for a hint property in Session Object to
inform if session is Locked or not. It is up to desktop environments
to keep this property up to date.
https://bugzilla.gnome.org/show_bug.cgi?id=764773
If the drag actor is destroyed before the animation
callback is called, the callback is never called and
we're sticked with dnd grabing the events after we
dropped the target.
https://bugzilla.gnome.org/show_bug.cgi?id=757676
We currently show the orientation lock button when an accelerometer
is present, however gnome-settings-daemon's xrandr plugin only applies
rotation when a builtin monitor is present. Update the button's
visibility to match gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=765267
ClutterLayoutManager's size request methods have an additional container
argument before the for-width/height parameters compared to ClutterActor.
https://bugzilla.gnome.org/show_bug.cgi?id=763068
While a channel has pending messages, it will pop up again when
dismissed. That is clearly not what users expect, so clear them
out first before closing a channel.
https://bugzilla.gnome.org/show_bug.cgi?id=747991
Let's make it really simple and ask user interactively, once. This
simplifies things for:
* Privacy panel of gnome-control-center as it doesn't have to filter
applications.
* Apps: If they are denied access, they can simply point users to
privacy panel of gnome-control-center since they can be sure location
access for the app can be enabled in there.
Also it's less annoying to user. Before this patch, if they denied
access to application, they had to keep doing that at least each time
they launched the application.
https://bugzilla.gnome.org/show_bug.cgi?id=762559
Alex told me that since it's not geoclue but rather GNOME-components
storing/accessing app permissions, it's better if we put it under
'gnome' rather than generic 'desktop' table.
Now that we no longer skip dimming/undimming windows while showing
the overview, we can still save a bit of work by changing the dimming
without animation while the window is hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=762475
We skip window animations while the overview is shown (and the window
group is hidden) to avoid unnecessary work. However when an attached
modal dialog is opened or closed, this involves checking whether the
parent window should be dimmed - skipping that test means that we can
simply fail to dim or undim a window altogether, so do that check
unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=762475
While we could have implemented this already a while ago, this would
have been a completely false security mechanism since we had no way of
reliably identifying applications. Since now with xdg-app, we can at least
reliably identify bundled applications, let's give users a choice of
which applications in particular they are OK with giving location data
to.
While we still can't reliably identify system (non-xdg-app) applications,
it seems extremely unlikely we'll ever be able to do that (at least not
in the near future) so we'll have to trust them to not lie about their
IDs.
Next release of geoclue will take the ID of bundled application directly
from corresponding xdg-app metadata so bundled applications can't simply
lie about their IDs.
https://bugzilla.gnome.org/show_bug.cgi?id=762119
This class will be responsible for authorizing applications that try to
access location information. Since this is mainly targetted for xdg-app
applications, we make use of xdg-app's D-Bus API to store
per-application authorization.
https://bugzilla.gnome.org/show_bug.cgi?id=762119
Add a dialog that is used in a following patch, to ask user if they want
a requesting application to gain access to their location.
Co-author: Florian Müllner <fmuellner@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=762119
Only recent IBus versions have support for this signal
which is used for wayland clients. In order to work
with older IBus versions we can silently ignore the
signal's absence.
https://bugzilla.gnome.org/show_bug.cgi?id=753476
We lost media controls outside of notification banners when
implementing the new notification designs. Reimplement this
functionality as a dedicated "Media" section in the message
list based on MPRIS.
https://bugzilla.gnome.org/show_bug.cgi?id=756491
Currently both the base classes for messages/sections and the message
list itself that instantiates the available sections are located in
the same module. As a result, it isn't possible to define sections
in a different module without introducing circular dependencies. The
Calendar module is already unwieldily large, so split it up a bit to
avoid it growing even bigger in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=756491
It is not always possible to determine the type of audio device that
got plugged in. Add a system modal dialog to query the user in that
case and export in on the bus to gnome-settings-daemon.
https://bugzilla.gnome.org/show_bug.cgi?id=760284
IBus now provides a new method for cursor positioning where the
coordinates are relative to the focused window. This is useful for
wayland clients which don't have access to their global coordinates.
https://bugzilla.gnome.org/show_bug.cgi?id=753476
We are already emitting a 'drag-end' signal when no more dragging
is happening, so it makes sense to emit a 'drag-begin' too when
starting, so that apps interested in implementing different logic
between those two events can easily do it without needing to deal
with the underlying 'button-press-event' signal for the actor.
https://bugzilla.gnome.org/show_bug.cgi?id=761208
The Next and Sign In buttons are disabled when the username/password
field is empty. However, the user can still bypass this button by
pressing the enter key, leading to some odd glitches with the log in
for 'Not Listed?' users.
This is easy to fix by simply not progressing to the next screen when
the button is disabled.
https://bugzilla.gnome.org/show_bug.cgi?id=746180
Before reenabling all extensions, we update the list of enabled extensions
to catch any changes that happened while extensions were enabled. However
this is currently broken as onEnabledExtensionsChanged() is a nop while
disabled, so just call getEnabledExtensions() directly.
draggable.startDrag() is called directly here (i.e. manualMode is not set),
we must keep track of the touch event and pass it to startDrag() then.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
We need to keep track of the pointer emulating touch sequence. In order
to have events properly redirected on touch devices, the
Clutter.grab_pointer and ungrab_pointer() have been replaced by the grab()
and grab_sequence() ClutterInputDevice methods, one or the other is used
depending on the device triggering DnD.
An extra "sequence" argument has been added to startDrag, passing null here
will resort to pointer grabs.
This is enough to make thumbnails in the WorkspaceBox draggable through
touch.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
It overrides ::button-release-event in order to implement the
hidden/shown toggling, it must do the same on TOUCH_END, otherwise
menus stay shown on touch.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
This works for pointers and touch on X11, there is however no pointer
emulation on evdev, so touch triggers ::clicked with button==0 which
is ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=756748
Generally a user-changed operation will be uninteresting, but if the
user is currently in the user list and the account changes to locked, we
want to remove it from the list, or if the user is not in the list and
the account changed to unlocked, we want to add it to the list. This
fixes the case where a new user account created in gnome-control-center
does not appear in the user list. The password mode is set in the new
account immediately after it is created, but the operations are not
atomic, so the login dialog considers the new user account when it is
still locked and rejects it from being displayed, then immediately
afterwards the account is unlocked. This commit causes the login dialog
to show the account when this occurs.
The containsUser() check here is not strictly necessary, but reduces
spurious calls to addUser() and removeUser(), since there's no easy way
to check if the locked status of the account has changed (as it's much
easier to connect to one signal on the UserManager than to
notify::locked on each User object).
https://bugzilla.gnome.org/show_bug.cgi?id=758568
Animated backgrounds are based on a start time in local time - in case
of a timezone change, that time is no longer accurate. To fix, we need
to either make BGSlideShow aware of timezone changes (and notify us to
update the animation), or just reload the animation - timezone changes
should be a rare event, so go with the simpler second option.
https://bugzilla.gnome.org/show_bug.cgi?id=758939
LoginDialog has a private _user, but UserListItem has a public user.
Easy to get wrong since _user would be the right thing to type in 90% of
this file.
Any time estimates we can come up with are notoriously unreliable;
even on devices that report correct (dis)charging rates, any change
in workload, screen brightness etc. can throw our estimate off by
a huge amount. This is further compounded by bad firmware and battery
firmware which reports inaccurate data as neither Windows nor Android do
not use that data.
So instead, limit ourselves to only showing the current percentage
and leave its interpretation to the user.
As an added bonus, we end up with shorter strings that are less likely
to cause problems with ellipsization when translated.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
Builtin chat and network notifications already follow the notification
policy of appropriate applications, it makes sense to do the same for
autorun notifications to give users control over hotplug notifications
in Settings.
If we detected that Bluetooth devices were setup, show the Bluetooth
menu so that users can easily turn Bluetooth back on.
This is a bit of a hack, as we cannot detect whether there is a
Bluetooth adapter at all when it's disabled, so we cannot tell whether
there were any Bluetooth devices setup, at some point. This state is
saved in the gnome-shell GSettings in the had-bluetooth-devices-setup
key.
Checking whether we saw Bluetooth devices at one point is a good
enough guess of whether there will be some in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=723848
It's very unexpected that a spinner animation would
preempt idles from running.
This commit runs the spinner animation with a low
priority to ensure it doesn't take over the main
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=754814
Right now the spinner animation updates every 14ms.
60 frames per second would be one frame per 16.667ms,
so we're waking up more frequently than we need to.
This commit changes the wakeup to happen after 16ms.
https://bugzilla.gnome.org/show_bug.cgi?id=754814
If the source actor is sized 0x0, the grabHelper will close the menu
on button release if the menu ends up flipped because in that case the
release event happens when the pointer is neither over the source
actor (since it's 0x0) or over the menu actor. A zero sized source
actor works for the non-flipped menu case because the menu's actor
itself ends up underneath the pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=756605
If we get another effect on the same actor, we should make sure to
remove the clone through the "overwrite" methods provided by Tweener, or
there will be a race that might end up with a stray clone being left
around.
https://bugzilla.gnome.org/show_bug.cgi?id=756714
The translation should describe the difference between the fullscreened
and unfullscreened position of the window - however we are currently
assuming a fullscreen position of (0, 0) instead of the monitor's origin,
which causes glitches on dualscreen setups.
https://bugzilla.gnome.org/show_bug.cgi?id=756697
Some labels in the system status menu - namely network names - are out
of our control, and may thus grow the width "infinitively" unless we
restrict the menu width. So far we have been doing this by setting a
fixed width or max-width, but any value we put there might end up
being too restrictive in some locales. Instead, request a width that
fits all the labels we want to show unellipsized and use that instead
of an arbitrary limit.
https://bugzilla.gnome.org/show_bug.cgi?id=708472
We use the newly introduced feature from Mutter to hook up our own
fullscreen and unfullscreen animations.
To give the illusion of a transition as smooth as possible, we create a
snapshot of the current contents of the actor before its state is
changed, and crossfade between the two states while the size changes.
https://bugzilla.gnome.org/show_bug.cgi?id=707248
StIcon will skip loading the texture when its theme node is unset (which
may happen on style changes while the widget is hidden). While our size
request to compute the dash icon size will create the icon's theme node
if necessary (and of all its parents), a missing texture can still throw
off our computation.
Make sure this doesn't happen by ensuring the icon's style first, so the
texture is updated in response to StWidget::style-changed if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=745649
When adjusting dash icon sizes, we compute the icon padding by subtracting
the configured icon size from the first icon actor's preferred size. To
make sure that the preferred size correctly corresponds to the current
dash icon size even while the icon is animating, we enforce the size
before the size request. For that we used to temporarily manipulate
the icon texture size directly, but commit e92d204d42 cleaned this
up to use the setIconSize() method instead.
This does not work however, as the icon actor's iconSize property will
always match the dash iconSize property, making the method a noop. So
go back to the original approach of enforcing the texture size to make
sure we always base our computations on correct values.
https://bugzilla.gnome.org/show_bug.cgi?id=745649
There is nothing particularly critical about this notification, it
was only marked as such to get certain behavior like auto-expanding
and sticking-around to be acknowledged by the user (as it offers
more actions than the summary notification, so it is frustrating
when it goes away because it was missed).
As all notifications will now stay visible until we are sure the
users has seen them, the latter reasoning no longer applies.
Auto-expansion doesn't appear too important and may even be considered
annoying by users, so remove the CRITICAL hint now.
https://bugzilla.gnome.org/show_bug.cgi?id=657923
We are currently erroring out when the tab chain doesn't contain at
least one window for an app which might happen for windows that don't
take focus like xeyes. This leaves us in a state where we can't show
the switcher at all. Let's just ignore these apps instead of looking
broken.
While the GtkSettings::gtk-shell-shows-app-menu property is meant to
reflect a desktop capability (i.e. in the GNOME case: the app menu is
shown in the top bar), it is possible for users to overwrite it.
Respect the setting and actually hide the menu in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=745919
Refer to the system menu in the top bar as "System" rather than "Settings" as
it contains more than just settings and "Settings" is already used for the
settings panel. "System" is also used elsewhere, so include context for
translators.
The destroy signal handler is kept connected despite the NotificationMessage
being destroyed, which leaves dangling NotificationMessage objects that will
be mass destroyed when the Notification object these depend upon is finally
destroyed.
Depending on the amount of accumulated NotificationMessages, this may lead
to temporary freezes or other more funky issues when recursion limits are
hit.
https://bugzilla.gnome.org/show_bug.cgi?id=755425
When loading several animations at the same time, the last call
overrides the result for all of them.
This commit caches all animations separately based on the source's
schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=741453
We currently will always allocate the user list's preferred size, so it
will grow indefinitely and never scroll; limit the height instead to
get the desired scrolling behavior when necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=754525
When the user successfully types their password, we should hide
the spinner from the button well right away, so it doesn't
consume resources until reset (which may happen significantly later
if the user is vt switched away)
https://bugzilla.gnome.org/show_bug.cgi?id=753891
The code previously tried to stop spinner after it was hidden, but
due to an incorrect check was only stoppig it after it was shown.
Also, it was only stopping after hiding due to an animation, and
failing to stop it in the non-animated case.
This left the spinner hidden and running while VT switched away
from the login screen, only stopping when the auth prompt was
reset when switching back.
https://bugzilla.gnome.org/show_bug.cgi?id=753891
* switch to a one-column layout (and adjust strings/widths
accordingly
* remove separator before system menu
* add link to account settings to user submenu for consistency
https://bugzilla.gnome.org/show_bug.cgi?id=751377
Since commit 79c04c93e4, we launch Polari instead of Empathy when
activating a chat notification for an IRC channel. It therefore makes
sense to follow Polari's notification policy for those notifications
rather than Empathy's.
https://bugzilla.gnome.org/show_bug.cgi?id=752881
We only need the user verifier for the purpose of user verification.
Once it's complete we should clear it so it doesn't get in the way
later.
This fixes a bug introduced in commit 3c8c5a5570 that leads to the
user session crashing when the login screen is reactivated.
https://bugzilla.gnome.org/show_bug.cgi?id=753181
We fade out the authentication prompt when a user successfully
logs into a user session. We reset it and fade it back in when
the user switches back to the login screen VT.
The problem is, we only fade it back in if the auth prompt status is
VERIFICATION_SUCCEEDED. It's possible for it to be NOT_VERIFYING
if the authprompt gets reset for some other reason in the interim.
This commit changes the check to be more precise. We now only skip
the fade-in, if we're already faded in, and we only skip the reset if
we're already reset.
https://bugzilla.gnome.org/show_bug.cgi?id=753181
Follow the design we have in gtk+ for buttons dialogs,
which are at the bottom and they expand full width, having
the same amount of space for each one.
Also, since this removes any space for non-button widgets
in the button area, move the spinner present in the auth prompt
dialog next to the password entry.
https://bugzilla.gnome.org/show_bug.cgi?id=746108
It may be 2015, but users still stumble upon the occasional .desktop
file that uses a filename encoding other than UTF-8. We currently
fail quite spectacularly in that case by not displaying any apps at
all - handle this case more gracefully, by only filtering out the
offending apps.
https://bugzilla.gnome.org/show_bug.cgi?id=651503
If there's a caret or focus move we should delay it until the pointer
is stationary for a little while so as to avoid jittery and spurious
viewport movements.
https://bugzilla.gnome.org/show_bug.cgi?id=752138
The user should be allowed to cancel if verification hasn't
started yet and they're typing in their username. This
commit changes the authPrompt cancel function to not
ignore such requests.
https://bugzilla.gnome.org/show_bug.cgi?id=752739
Normally the user isn't allowed to proceed passed
the username question until they've filled it in.
To ensure this, the authprompt code desensitizes
the next button when the number of characters change to
zero.
Unfortunately it fails to desensitize the next button
up front when the entry starts out empty.
This commit addresses that bug.
https://bugzilla.gnome.org/show_bug.cgi?id=752739
If the next button ever gets set to Sign In, it won't
get reset to next until the next question asked by pam.
This commit ensures it gets reset to Next when asking
for the username.
https://bugzilla.gnome.org/show_bug.cgi?id=752739
This object (not really a Clutter.GestureAction) sets up a captured-event
handler, which exclusively looks for 4 finger touchpad swipes, emitting
an ::activated signal under the same terms than WorkspaceSwitchAction.
https://bugzilla.gnome.org/show_bug.cgi?id=752250
We currently only cancel the user verifier on reset if
verifying, but that means we don't properly cancel it when
asking for a username at the Not Listed screen.
The object already handles getting called when there is
nothing to cancel, so just cancel it unconditionally.
https://bugzilla.gnome.org/show_bug.cgi?id=752438
shell_global_get_overrides_settings() may return %NULL in case of
custom shell modes (i.e. not the default and classic ones); while
this is not officially encouraged, we should still handle it rather
than throw an error.
https://bugzilla.gnome.org/show_bug.cgi?id=751921
The control center will call this method when the configuration dialog
for a display opens/closes, which will cause the same labels to quickly
fade out and in again, looking like it's flickering.
This commit fixes the issue by removing the tweens altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=751599
In some cases we might be allocated a size such that
this._grid.topPadding and this._grid.bottomPadding are both 0 which
means that the ScrollView fade effect gets removed. In that case don't
try to access the effect since it will be NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=750714
The menu items to move a window to the left/right workspaces were
removed when the window menu was implemented in GNOME Shell. This
is OK for the default vertical layout but not for alternatives.
https://bugzilla.gnome.org/show_bug.cgi?id=751344
And make these only handled on wayland. There's a plethora of issues
around touch passive grab and touch/pointer doubly handling to use
these right away on X11, so we stick to single-touch/pointer there.
This reverts commit 032a688a72.
https://bugzilla.gnome.org/show_bug.cgi?id=750287
Instead of using gnome-settings-daemon's D-Bus interface's presence.
iio-sensor-proxy now offers a D-Bus interface, which will exported
"HasAccelerometer = true" when an accelerometer is present.
https://bugzilla.gnome.org/show_bug.cgi?id=749671
Just reuse this gesture rather than implementing edge detection ourselves.
As a plus, we might get touchpad swipe support when Clutter handles it.
https://bugzilla.gnome.org/show_bug.cgi?id=749742
The menu is clearly associated with a particular window, so keeping
it around when the window is gone doesn't make sense - in case of
the window menu, it is actually harmful as every action will act on
the invalidated window and result in a crash. So just dismiss the
menu when the menu is unmanaged.
https://bugzilla.gnome.org/show_bug.cgi?id=749529
When chrome is added with the trackFullscreen parameter, the actor's
visibility will be updated automatically whenever its monitor's
fullscreen state changes. However as we currently ignore the fullscreen
state at the time the chrome is added, the initial visibility may well
be incorrect - fix this by updating the initial visibility as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=749383
Since the introduction of per-source notification policy in commit
098bd4509b, the NotificationPolicy::enable-changed signal has been
used to track the 'enable' setting. However as we never actually
emitted that signal, this never worked without a restart - oops.
https://bugzilla.gnome.org/show_bug.cgi?id=749279
If we aren't the active session clutter can't animate and thus we
can't expect the shield to be shown before releasing the suspend
inhibitor so we should release it immediately when becoming inactive.
https://bugzilla.gnome.org/show_bug.cgi?id=749228
The whole point of holding a suspend inhibitor is to be able to lock
before suspending.
Currently, when resuming we immediately take the inhibitor without
checking that we're locked which means that we won't be able to
release this inhibitor if we don't unlock at least once.
To prevent that and to better match the inhibitor's intention in the
first place, we can tie the inhibitor with not being locked. In
practice, we also want to let the locking animation finish before
suspending, so we'll tie the inhibitor with not being active
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=749228
This could happen if we are VT switched away and an animated
activation is requested because we're preparing to enter sleep. Since
we don't animate in this case we'd never reach
_completeLockScreenShown() before coming out of sleep, at which point
we _inhibitSuspend() again and would leak the previous inhibitor.
https://bugzilla.gnome.org/show_bug.cgi?id=749228
Commit 08690d658f generalized the banner-blocking behavior of the
dateMenu to all menus that would obscure the banner. However setting
up the 'open-state-changed' handler only when an indicator is added
does not work for indicators that change their entire menu (like the
app menu) - we currently end up with menus with no connected signal
handler, and throw an error when trying to disconnect an invalid
signal ID.
To address this, add a new PanelButton::menu-set signal and use that
to set up the 'open-state-changed' handler.
https://bugzilla.gnome.org/show_bug.cgi?id=745910
For barriers like the hot corner which are made up of multiple axis
barriers, make sure that all the barriers have been left before
resetting the barrier.
We currently block banners while the time+date menu is open, as it
would obscure the notification. However it is not necessarily the
only menu for which this is the case, so generalize the behavior
to all menus that would overlap banners when open.
https://bugzilla.gnome.org/show_bug.cgi?id=745910
As notifications appear in the time+date dropdown's message list, there's
a strong relationship between notification banners and the menu. However
while the time+date menu is centered by default, which matches the banner
position, its actual position depends on the session mode - in particular
it is moved to the right in classic mode.
Reinforce the relationship in these cases by moving notification banners
underneath the time+date menu.
https://bugzilla.gnome.org/show_bug.cgi?id=745910
According to systemd logind's documentation, the CanSuspend() method
"returns 'na' in case "the operation is not available because hardware,
kernel or drivers do not support it", while "'no' is returned if the
operation is available but the user is not allowed to execute it".
See http://www.freedesktop.org/wiki/Software/systemd/logind
Thus, we need to return true here when the reply for the CanSuspend
method is neither 'no' nor 'na', or we would providing false positives
in cases where suspension is simply unsupported.
https://bugzilla.gnome.org/show_bug.cgi?id=748338
Unlike entries in the calendar's message list, banners are not subject
to the normal keynav chain, and making the banner actor itself unfocusable
allows for the focus to be moved to the action area when expanded.
https://bugzilla.gnome.org/show_bug.cgi?id=747205
The window menu has all those workspace related options, but with multiple
monitors, it is much more interesting to quickly move a window 'over' to the
other monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=633994
Now that the tray is shown temporarily when a tray icon appears,
we can decrease its visible width when concealed to interfere less
with window content without hurting discoverability.
https://bugzilla.gnome.org/show_bug.cgi?id=746787
There is a balance to hit between discoverability and getting out
of the way, and the legacy tray currently fails in both regards.
To address the first issue, temporarily reveal the tray when a
new icon is added.
https://bugzilla.gnome.org/show_bug.cgi?id=746025
Resident notifications are not really a thing anymore with the new
design, so all the user sees are some notifications that mysteriously
cannot be closed. That's utterly confusing, stop doing that.
https://bugzilla.gnome.org/show_bug.cgi?id=746860
libcaribou was designed to generate X events which works under wayland
sessions for X clients but obviously doesn't work for wayland clients
and for shell chrome.
This patch adds a simple caribou display adapter which inherits from
its X display adapter and allows us to continue to work for X clients
and at the same time makes the OSK work on shell text entries by
sending key events directly to the focused text actor.
Making the OSK work for wayland clients requires much bigger changes
at various levels in the stack and either not using libcaribou or
re-working it substantially so that's left for future work.
https://bugzilla.gnome.org/show_bug.cgi?id=747274
Sources are destroyed with their last notification. This is usually the
correct behavior, however in case of chat sources, the corresponding
telepathy channel might still be open, and any further messages that
should trigger a notification are lost because chat sources are only
created when telepathy's channel dispatcher notifies us about a channel
(via ObserveChannels).
Loosing messages like this is unexpected, so keep chat sources around
even without notifications while the channel is open.
https://bugzilla.gnome.org/show_bug.cgi?id=747636
Currently the lifetime of a chat source and its single notification
are tied together. While this apparently makes sense, it means we
will lose all follow-up notifications when a source is destroyed
with the corresponding telepathy channel left open. We will fix this
soon by tying the source to the channel's lifetime rather than the
notification, prepare for this by recreating the notification if
necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=747636
It's possible for a user to type their password so quickly
that GDM hasn't even had time to ask for the password yet,
much less have time to process the answer.
In that situation, we tuck the user response away as
_preemptiveAnswer, and pass it along to GDM when GDM is finally
ready for it.
The problem is, there's a bug in the code, where we send
null for the service name in the answer, instead of the right
service name (say "gdm-password").
This commit addresses the bug by making sure we don't pass the
answer along, until the service name is properly set in
_queryingService. To ensure that, answering query (answerQuery)
based on _preemptiveAnswer has been shifted right below
this._queryingService = serviceName;
https://bugzilla.gnome.org/show_bug.cgi?id=737586
Instead of saving only the current input source when entering password
mode, let's save the whole MRU list so that we can restore it when
returning to normal mode.
This is closer to user expectations since password mode is a transient
and short lived state.
https://bugzilla.gnome.org/show_bug.cgi?id=746605
If the login screen actors aren't placed at pixel
boundaries then they will show up blurred with fuzzy
text.
This commit ensures all actor allocations are floored
to integer coordinates.
https://bugzilla.gnome.org/show_bug.cgi?id=746912
We don't need a different GSettings object for each app or
favorite item.
While it practice it does not change much (AddMatch is still
obviously sent out), it minimally reduces the overhead on
changes, and makes for cleaner code.
https://bugzilla.gnome.org/show_bug.cgi?id=746509
In recent glib, change notifications don't actually happen unless all
keys have been read, in an effort to reduce unnecessary dbus
traffic for shortlived GSettings object and avoid AddMatch calls.
But we care about changes here, so we need to make sure we're
subscribed, and an easy way to do so is to reuse the same object
to watch for changes and to load the active providers at startup.
https://bugzilla.gnome.org/show_bug.cgi?id=746509
When introducing support for "default disabled" search providers
this part was overlooked, so enabling a default disabled provider
would be ignored until the next login.
https://bugzilla.gnome.org/show_bug.cgi?id=746509
When the chat app is focused, we should hide all banners immediately.
A good way to do so, without tracking which app is focused, is
to look for messages that are acked when the banner is unexpanded,
which implies they were acked by some other telepathy client.
https://bugzilla.gnome.org/show_bug.cgi?id=746364
Pause dynamic workspace management while workspaceSwitcherPopup
is shown so as to eliminate infinite creation and destruction of
workspaces, thus preventing stuttering while trying to move a
window to last workspace.
Add _isWorkspacePrepended flag to make sure only a single workspace
is prepended at a time thus preventing the possibility of prepending
infinite workspaces while dynamic workspace management is on pause.
Prepend a new workspace by creating a new workspace instead of only
shifting the windows to next workspace so that the workspaceSwitcherPopup
may appear in sync with what's happening behind the scene and display
correct number of workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=712778
User read time per character has been changed from 16ms to 48ms because the
message of information about last login is displayed for half a sec that is not
a good user experience. So time to read a character is increased to 48ms from 16ms.
https://bugzilla.gnome.org/show_bug.cgi?id=720885
To switch workspace by keyboard in the overview, the user currently
has to use the normal keybinding. However as the vertical alignment
of workspaces makes them very similar to pages in the app picker, it
makes sense to also support the standard pageUp/pageDown keys.
https://bugzilla.gnome.org/show_bug.cgi?id=742581
"Moving" a window to another workspace doesn't make sense when it cannot
be unstuck, and is potentially confusing if a new workspace is added at
the start/end - just don't do anything in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=746782
NVIDIA drivers don't preserve FBO contents across suspend / resume
cycles which results in broken backgrounds. We can work around that by
forcing a refresh when coming out of suspend.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
Currently the menu position below the button means that the menu
can extend to roughly half the screen height before ending up partly
off-screen. This is plenty of space for commonly installed sessions,
but some users have a significantly higher number of sessions in the
list. Move the menu to the side of the button in that case to maximize
the vertical space the menu may take up.
https://bugzilla.gnome.org/show_bug.cgi?id=734352
There is currently no way to trigger an icon's right-click menu by
keyboard. While there's a good chance that the icon will ignore
<shift>F10 and similar shortcuts, passing on key events will at
least make it work for some icons ...
https://bugzilla.gnome.org/show_bug.cgi?id=746487
While legacy status icons lack a proper accessible name of their own,
we can try to find the corresponding application or the icon's window
title - hopefully most status icons provide at least one, so they
don't show up completely "blank" in screen readers.
https://bugzilla.gnome.org/show_bug.cgi?id=746487
g-s-d has been taking care of this for us but in a very hackish way
that causes dconf writes on every startup and also doesn't handle
dynamic updates to locale1's properties which has become a problem now
that GDM keeps its greeter session running in parallel with users'.
To take care of this properly, this commit introduces a settings
abstraction with both system and session implementations. The session
implementation just wraps access to the existing gsettings while the
system one gets its values from org.freedesktop.locale1's properties.
https://bugzilla.gnome.org/show_bug.cgi?id=746288
There's some vestigial code for hiding the user list
that runs at the same time its parent is hidden.
Only the parent should be hidden, at this point, so
there's situations where the user list hides and
never comes back.
This commit fixes that, by deleting the vestigial code.
https://bugzilla.gnome.org/show_bug.cgi?id=719418
Since commit 75745fc23f, the bodyStack itself is no longer start-aligned
to not break custom body actors like chat notifications. However we still
want "normal" body actors start-aligned to get the correct RTL behavior.
We now stopped using notification actors directly for anything, so
we can simplify the Notification class significantly by turning it
into a purely informational object others can use to built their UI
representation from.
https://bugzilla.gnome.org/show_bug.cgi?id=746343
Since we stopped special-casing chat notifications to use the old
notification actor, we need to provide a notification banner to
maintain the inline chat functionality, so split out the UI from
the existing ChatNotification class.
https://bugzilla.gnome.org/show_bug.cgi?id=746343
Special-casing banners of resident notifications was really a
thinly veiled special case for chat notifications, as those were
still using the old notification actor which coupled the life-time
of the notification to its actor. This is no longer the case, so
we can do the sane thing and destroy banners once they are no
longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=746343
Passing null as body always meant clearing the existing one. While this
mattered less with the old message tray which used the expanded actor,
the new message list in the calendar uses the unexpanded body. We clearly
don't want that to disappear on icon changes, so pass the existing one.
https://bugzilla.gnome.org/show_bug.cgi?id=746343
We currently use the setActiveSession method to both mark a menu item as
selected, and also tell gdm about the current session the user selected.
Since gdm is ultimately in charge of the state, we should decouple this
and simply ask gdm to set the session, and have the menu item reflect
what gdm thinks is the current session.
This prevents state getting mismatched and oscillations from happening,
where we get in a loop of constantly telling gdm what the session is.
https://bugzilla.gnome.org/show_bug.cgi?id=740142
If a smartcard is missing from the reader when we start up,
and the system is configured to disable password authentication,
then we need to ask the user to insert their smartcard.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=740143
It makes sense for the gesture to reflect the position of the
activities button / dash. In RTL locales, those are located on
the right rather than the left, so make the gesture apply to
the opposite edge in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=737502
Instead of listening to a dbus property exported by g-s-d, listen to the
MetaBackend signal telling the last interacted device, and make sure we
only show the keyboard for touchscreens.
https://bugzilla.gnome.org/show_bug.cgi?id=745977
While legacy status icons are notoriously bad with regard to
accessibility (well, among many other things), we should still
make them available via ctrl-alt-tab ...
https://bugzilla.gnome.org/show_bug.cgi?id=746022
Currently dismissed events will simply reappear when browsing
back and forth between dates, which is clearly broken. Instead,
hide events that have been dismissed permanently. For now, we
simply store a list of ignored IDs ourselves, until we get API
in evolution-data-server to reliably store custom per-event
properties.
https://bugzilla.gnome.org/show_bug.cgi?id=744927
If the action was initiated by the user, we want to show the
modal dialog immediately, while if the action was initiated by
NM autoconnection policy we first show a notification and then
show the dialog when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=660293
The design calls for differentiating between dismissable reminders
and permanent events, based on whether the selected date is "today"
or some other day.
https://bugzilla.gnome.org/show_bug.cgi?id=744927
While messages in the EventsSection are currently simple enough to
use the generic Message baseclass, the design calls for events to
only be dismissable on the current day. We will need a subclass to
implement this behavior cleanly, so add one.
https://bugzilla.gnome.org/show_bug.cgi?id=744927
As the design calls for slightly different behavior for the current
day, move the _isToday() function out of MessageListSection to have
it available elsewhere as well ...
https://bugzilla.gnome.org/show_bug.cgi?id=744927
Currently the clear action in the section header simply removes all
messages from the section. While the result looks exactly as if the
close button of each individual message had been clicked, the messages
are not actually closed - after a restart (or some other condition that
triggers a reload), the messages simply reappear, which is confusing.
Do the expected thing instead, and make clear close all messages in the
section.
https://bugzilla.gnome.org/show_bug.cgi?id=746027
Currently a message can only be closed by its close button. However
as we want to make a section's clear action synonymous with clicking
the close button of each individual message in the list, we will need
to expose the close action, so add a corresponding method.
https://bugzilla.gnome.org/show_bug.cgi?id=746027
Currently closing all messages is subtly different from clearing
a section, which is confusing. Start making the behavior more
predictable by only showing a close button in the message when
the section's clear button would remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=746027
This closes a race between setTerms and a slow GetInitialResultSet.
The bug manifests as follows:
- initial search for a short string
- previous results === undefined, call GetInitialResultSet
- user types more, cancel previous search in setTerms()
- mainloop, then _gotResults([])
- previous results === [], !!previous results === true
- therefore call GetSubsearchResultSet with an empty list of results
- _gotResults() from GetSubsearchResultSet is empty
- much later, return from GetInitialResultSet is discarded by
cancellable
- user unhappy because what he searched for is not there
After this fix, the flow is:
- initial search for a short string
- previous results === undefined, call GetInitialResultSet
- user types more, cancel previous search in setTerms()
- mainloop, but no _gotResults
- previous results === undefined, call GetInitialResultSet again with
longer string
- some time later, return from first GetInitialResultSet is discarded
by cancellable
- soon after, return from second GetInitialResultSet comes with good
results
- user happy
https://bugzilla.gnome.org/show_bug.cgi?id=745861
If a different message ends up underneath the pointer at the end
of the removal animation, it won't receive an enter event until
the pointer is moved, and thus its hover state will not be correct.
Fix it up manually with an explicit pointer sync.
https://bugzilla.gnome.org/show_bug.cgi?id=746019
As we use two separate body actors for expanded and unexpanded
notifications, updating only one of them on notification updates
is not enough - if the notification has already been expanded,
we need to update the second label as well.
There's a strong expectation that delegating or presenting a channel
will result in a window being activated, so close both overview and
calendar as we do elsewhere.
Enabling line-wrapping of the unexpanded body is not enough to enforce
a single line when the text has embedded newlines, so replace these with
spaces (this is similar to setting ClutterText:single-line-mode, however
that would use a paragraph separator glyph instead).
If activateWindow() is called as the result of activating an item
in the Time & Date drop-down (most likely a notification), it should
behave as other items and close the calendar.
NotificationMessages set the icon either from the corresponding
notification's gicon property, or fall back to the source icon.
Except that we never actually set a notification's gicon property to
the provided icon, so we currently just always fall back, whoops!
If users click outside the search entry while it's empty we reset and
thus give up key focus. This means that when using an input method
with candidate popups, interacting with the popup with a mouse click
cancels the current input method context if there's no other text in
the entry besides the preedit string.
To avoid this we can check if the entry has preedit in addition to
checking if it has normal text.
https://bugzilla.gnome.org/show_bug.cgi?id=745167
Ideally we would allow navigating into the button in the screen
reader case, so the configured clocks are read out properly.
However we can still do better than nothing short-term by pointing
to the section header as the button's label_actor.
https://bugzilla.gnome.org/show_bug.cgi?id=745393
Currently both the timestamp and the position in the notification list
are static once a notification has been added; however notifications may
be updated later, in which case those properties should be reevaluated.
https://bugzilla.gnome.org/show_bug.cgi?id=745132
On locales that support it, time formats should follow the 12-hour/24-hour
preference, which implies that they should be updated when the setting
changes. So add another utility method which creates a label for a specific
time and keeps it in sync with the format setting.
https://bugzilla.gnome.org/show_bug.cgi?id=745111
The world clock uses GLib.DateTime instead of the built-in Date type
because of the much superior timezone support, and therefore cannot
use the new formatTime() helper. To make this possible, modify the
method to support a parameter of either type.
https://bugzilla.gnome.org/show_bug.cgi?id=745111
Replace the time formatting in notifications and events with the
new utility method - this makes sure that all times are now following
the clock-format setting and use LC_TIME.
https://bugzilla.gnome.org/show_bug.cgi?id=745111
Displaying a time is more complex than it appears at first glance:
it should respect the user's choice regarding 12- our 24-hour format (but
only when supported by the locale) and follow the LC_TIME rather than the
LC_MESSAGES setting.
So rather than getting it more or less right in various places, it makes
sense to defer to a helper method which hopefully does the right thing. The
method added by this patch is based on _formatTimestamp in telepathyClient
with some minor tweaks:
- there's an additional params parameter which allows enforcing
a time-only format, even on dates other than the current one
- only a single desktop settings object is created and shared between
invocations
https://bugzilla.gnome.org/show_bug.cgi?id=745111
Currently scroll events during the swarm animation will make the
grid appear immediately in addition to the animating clones, and
there'll be a mismatch with the icon at the target position. This
badly breaks the illusion of launchers emerging from the dash and
positioning themselves in a grid - as scrolling icons "mid-air"
before they form a paginated grid doesn't make much sense anyway,
fix this issue by ignoring scroll events for the duration of the
animation.
https://bugzilla.gnome.org/show_bug.cgi?id=745574
These notifications are annoying for the most part: presence
changes happen inside an app (empathy or polari), and that app
should have in app notifications for errors, instead of spamming
the global notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=745503
The previous code was applying the per row scaling factor of the current
row to the cumulative sum of all previous rows when calculating the y
position of a row. This resulted in the row being shifted up so it would
overlap other windows when the previous rows were not using the same
scaling as the current one.
Also the previous code was not considering that the spacing does not get
scaled when calculating the scaling factor. This is wrong as well and
could result in the overview overlapping the workspace switcher in
situations with lots of windows open.
This fix gives each row the appropriate height according to its scaling
factor and then ensures that the grid remains vertically centered after
losing some of its height.
https://bugzilla.gnome.org/show_bug.cgi?id=744883
Clients can be expected to deal with the WM going away temporarily,
but not the display server - so when running as wayland compositor,
a restart is generally a fancy way of killing the user session, and
there's little we can do about it except for preventing the user to
shoot herself in the foot by throwing an error.
https://bugzilla.gnome.org/show_bug.cgi?id=741665
While those elements cannot be activated, they still provide useful
information to screen readers, so include them in the focus chain.
For the same purpose, set a more verbose accessible name, given that
it is not bound by the same space constraints as the visible label.
https://bugzilla.gnome.org/show_bug.cgi?id=706903
It doesn't make much sense to show a section if it must remain empty
due to the session mode - there won't be any events if the session
mode disallows events, or notifications if those are disallowed. So
take the session mode into account and update the sections' visibility
accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=745494
We currently show the world clocks section unconditionally, even when
the session mode disallows launching the Clocks app to configure the
displayed clocks. This does not make sense, so hide the entire section
when the session mode disallows settings.
https://bugzilla.gnome.org/show_bug.cgi?id=745494
Commit 5a8923ef95 removed support for legacy status icons from
the notification system, as we no longer want them to appear as
notifications. As we are unfortunately not quite at a point where
we can remove all support for them for good, so we now need an
alternative place to put them. Add a small dedicated tray at the
bottom which appears when any legacy status icons are active. By
default it is almost completely hidden to not interfere with the
user's windows, but can be expanded on demand to interact with
the icons.
https://bugzilla.gnome.org/show_bug.cgi?id=745162
polari is the GNOME app for IRC, empathy is for everything else
So prefer polari to empathy for IRC channels. We don't need
to check that either exists (even though polari is not a core
app) because mission control tries every handler if the preferred
one fails.
Depends on bug 745418 for polari to be mission control activatable.
https://bugzilla.gnome.org/show_bug.cgi?id=745431
Make sure the message list section is set to the current date
when opening the menu, otherwise the calendar might skip
the selected-date-changed event (because the day did not change)
which would leave the message list with an uninitialized date.
https://bugzilla.gnome.org/show_bug.cgi?id=745412
Turns out this makes interaction with the OSK or candidate popups
using a mouse basically impossible since they get dismissed when the
key focus is captured by a window in the overview.
This reverts commit aeb9f5775f.
https://bugzilla.gnome.org/show_bug.cgi?id=745245
Messages can be dismissed using a pointer device by clicking the
close button, there's no reason to not make the same action
available via keyboard as well. Delete looks like an obvious
choice ...
https://bugzilla.gnome.org/show_bug.cgi?id=745279
The overview has a longer life-time than dash items, so we are
leaking a signal connection each time an item is destroyed.
Spotted by Michele (<micxgx@gmail.com>)
https://bugzilla.gnome.org/show_bug.cgi?id=744575
As it is impossible to interact with notification banners while a DND
operation is ongoing, we can temporarily hide the banner container from
picks so that DND works as expected even while a banner is showing.
https://bugzilla.gnome.org/show_bug.cgi?id=744912
Since commit e189a34, the trayBox uses a Contraint to cover the primary
monitor's work area. This allows banners to be clipped so they don't
leak into monitors above the primary one during animations. However even
without being reactive, the trayBox now interferes with operations like
Looking Glass' object picker and overview DND.
With the trayBox no longer being positioned manually, there's no strong
reason to keep it in LayoutManager, and handling it in MessageTray allows
to hide the actor while no banner is showing, which helps with the issue
outlined above.
https://bugzilla.gnome.org/show_bug.cgi?id=744912
The actor is supposed to be hidden while no notification banner
is displayed, and in addition to that when banners are temporarily
blocked (because the calendar is open). However the current code
always shows the actor when banners are not blocked, fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=744912
The screen should be woken up when a new notification is shown on
the lock screen, but not when a notification arrives while disabled.
Add a missing condition to fix.
https://bugzilla.gnome.org/show_bug.cgi?id=744114
The problem is caused by '_askForUsernameAndBeginVerification' being
called multiply times. So when we click 'next', the old connected
function will also be executed.
The mode is never set after the removal of the bottom tray, so it
no longer makes sense to pass it to allowKeybinding(). We can also
safely remove it from the ActionModes flags altogether without
requiring a synchronized update with gnome-settings-daemon, as
the latter never used any flag value above LOGIN_SCREEN.
When it comes to keybindings or gestures, there's not really a good
reason why popups associated with the top bar should behave differently
from any other shell menus. Just set the action mode generically for
all menus, so actions like screenshots or media-keys start working
with menus like the background- or app launcher context menus.
https://bugzilla.gnome.org/show_bug.cgi?id=745039
We reuse the old body text on useMarkup changes and for expanded
labels. However just taking it from the label actor does not work
when markup is used, as once applied it will be stripped from
ClutterText:text.
So to preserve markup, keep our own copy of the original string
around.
https://bugzilla.gnome.org/show_bug.cgi?id=744907
Markup in notification titles is not support (and never has been).
Therefore the text is run through g_markup_escape_text(), and as
a result we do have to use markup internally to correctly show
legal-but-escape characters like '&' or '"'.
https://bugzilla.gnome.org/show_bug.cgi?id=744894
The message indicator conveys that the message list contains unseen
messages that will not be shown as banner. So its visibility depends
on two factors: the number of unseen messages, and the number of
messages waiting in the queue to be shown as banner. As we currently
only update the visibility on changes to the former, the indicator is
not always accurate - for instance sources notify count changes before
passing on a notification to the message tray for display.
To fix, add a signal to the message tray to notify when the queue
changes and use it to update the indicator's visibility.
https://bugzilla.gnome.org/show_bug.cgi?id=744880
Chat notifications are king of custom, so we'll leave them out for now
and keep using the old banner. However we can port the subscription
notification.
Hotplug notifications use custom notification banners to include
application icons in buttons. Bring those back by providing an
appropriate createBanner() implementation.
While we want to encourage the use of regular notification banners,
some of our built-in stuff does require more or less customized content
("more" being chat notifications, a.k.a. king of custom).
Account for this use case by delegating banner creation to a method,
so either Notification or Source subclasses can overwrite it.
Nothing except for the chat notification is really custom, so stop
specifying the flag for anything else - it will soon become a bit
harder to create non-standard notifications, so don't do it for no
good reason (discouraging this is of course the reason for making it
harder in the first place) ...
Instead of using the notification's own actor as a banner (and
keeping it around after the banner was displayed to not dismiss
the notification itself), create a separate banner actor from
the information the notification provides, just like we do for
lock screen and message list notifications.
This change breaks notifications with custom content, but only
temporarily - we will soon provide a hook to allow customizations
again.
We no longer have a single notification actor that is either displayed
as banner or reparented to the summary depending on state - both the
lock screen and the notification section of the message list create
their own UI based on the information attached to the notification
object. Adding to this that different representations of a notification
may now exist simultaneously (as they are included in the message list
immediately rather than after the banner has been displayed), it no
longer makes sense to keep the banner actor in the notification itself.
Add a new NotificationBanner class that provides a separate banner
implementation based on the message list's NotificationMessage that will
soon replace the existing notification banners.
Both the screen shield and the notification section in the message
list create their own UI for notifications rather than using the
notification actor itself. Currently there is no clean way for such
representations to include notification actions - we will need this
as we will soon use a separate actor for banners as well, so keep
track of actions added via addAction().
Notifications in the message list cannot be expanded, however we will
soon use NotificationMessage to re-implement notification banners, where
we still want actions and expanded content.
While this functionality logically belongs to the future banner subclass,
it is cleaner and easier to have the basic support in the base class.
This also leaves the door open for expanded notifications in the summary,
should that become a thing again.
The panel is not visible when in fullscreen, but critical notifications
may still be shown - having them pop out from where the panel would be
looks unpolished, so adjust the trayBox accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
It was removed as actors that should not affect the input
region can simply be added to the uiGroup instead. However
the property is useful to add non-reactive chrome, but then
use trackChrome() to add a child to the input region.
This reverts commit e62d22a50e.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
Occasionally it makes sense to constrain to a monitor's work-area
rather than the entire monitor, so implement that behavior and add
a property to turn it on.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
St's hover tracking uses ClutterInputDevice, which unfortunately may use
an outdated cursor position to determine which actor is hovered. Using
MetaCursorTracker instead would fix this, but would require linking St with
libmutter - avoid this for now by manually fixing up Clutter's view of
the pointer position in the case where we rely on it working properly.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
While applications can no longer spam the users with a constant stream
of banner notifications, it is still possible to drown the summary in
the message list. Avoid this by limiting the number of notifications a
single source is allowed to display simultaniously.
test-xy-stress in libnotify's tests suddenly became fun again ...
https://bugzilla.gnome.org/show_bug.cgi?id=744850
We want to shield users from being overloaded by an overwhelming stream
of notification banners, either due to coming back from idle/lock or
because an application is misbehaving. Previously we replaced all queued
notifications with a summary notification in that case, but now that
notifications appear in the summary immediately, we can simply stop
adding them to the queue and rely on the date menu to convey that
information to the user.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
The summary may contain notifications that have not been seen by the user
and won't be shown as banner. Currently this is only the case for resident
notifications that are emitted by the focused app, but it will become more
common as we will start limiting the number of queued notifications.
Indicate to the user that more notifications are available by displaying a
small dot in the top bar button.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
Source::count-updated is emitted as notifications are added or removed,
which is correct for the primary notification count. However it is not
for the unseen count, which will also change when a notification is
acknowledged without being removed. At the moment this does not matter,
as the unseen count is only used on the screen shield and notifications
are never acknowledged while the screen is locked. However we will soon
use the unseen count in the normal session as well, so emit the signal
in this case too.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
The message tray is now empty and about to be removed, so an indication
at the bottom edge of the overview becomes an odd location to convey the
status of the summary. We will eventually display an indication in the
top bar that unseen messages are available, for now just remove the
existing indicator.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
Using a "There are too many notifications" notification is a bit odd,
and we will address the issue differently soon. So rather than update
the notification to do something else than opening the mostly empty and
useless tray when clicked, remove it altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
No Source subclass used it to do anything special, and with sources
no longer having any UI representation on their own, doing anything
else isn't useful either, so just kill off that hook.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
It was a nice feature, but with sources no longer being represented in
the UI, there is no longer a way for users to make use of it. If we want
to bring the feature back in the future, it would probably make more
sense to implement via the chat source's policy anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
Since the summary area was removed from the message tray, Source are not
longer represented in the UI, so right-click menus and summary icons are
no longer a thing.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
The notification list in the calendar drop-down now functions as summary
area, so we can drop it from the message tray and remove a lot of complexity
from the state machine.
https://bugzilla.gnome.org/show_bug.cgi?id=744850
There is not good reason why activating a GTK+ notification should
behave fundamentally different from fd.o notifications - we don't
raise the app because we expect it to perform an appropriate action,
but that does not include closing overview or calendar for us ...
https://bugzilla.gnome.org/show_bug.cgi?id=744817
Just like we leave the overview when activating a notification,
the calendar popup should be closed - after all, the only case
where the calendar is open when a notification's default action
is activated is the user clicking an entry in the message list's
notification section.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
Display notifications that have not been dismissed in the message
list - eventually this will replace the existing message tray summary.
Notification messages show icon, title and one line of the body and
can be clicked to activate the default action. However they cannot be
expanded, so other actions or the full body text are not accessible
in this mode.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
Since notification support was added to the lock screen, notifications
are no longer necessarily represented by the actual notification actor
anymore. However when an existing notification is updated, external
representations currently become outdated.
Emit an appropriate signal which allows them to update.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
When we will start to show notifications in the date drop-down, we
will not use the actual notification actor, but construct our own UI
based on Calendar.Message. This is similar to what we already do in
the lock screen, except that in this case clicking the notification
should activate the default action.
So rename the existing _onClicked() method to activate() to make it
clear that such use is acceptable. While not strictly necessary, also
rename the corresponding signal to match.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
As the popup's height depends on its content, which itself varies
depending on the selected day, browsing the calendar can result
in distracting size changes. To avoid this, the design calls for
the height to be frozen to the previous one in that case.
As the popup will always open with the current day selected, we
don't have to be very sophisticated and can just lock the popup
to the height corresponding to that day.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
The message list is not only a replacement for the calendar events
list, it will also take over the notification summary from the
message tray. As we start drawing events from other sources than
calendars, hiding it based on whether or not any calendars have
been set up is no longer appropriate, so always include it in the
calendar drop-down now.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
Turn the existing EventsList into a MessageListSection and add the
message list to the calendar drop-down. The new events list only
displays events for the currently selected day, but in a more
structured and friendlier way than the old one.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
The message list is a scrollable list that will hold sections of
different types of time-related messages like notifications,
calendar events or birthday reminders. When no section displays
any content for the selected date, a placeholder is shown instead.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
We will start using both URLHighlighter and the _fixMarkup() helper
method the same way it's used in MessageTray. Usually we should
make fixMarkup() public and call the existing methods, but we are
planning for them to go away soon, so just keep two copies until
the original one is removed.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
We will soon replace regular menu items in the calendar drop-down
with more complex elements.
However there will still be items that should close the drop down
when activated - rather than making the menu available throughout
the hierarchy (and eventually from outside as well when we add the
notifications list), have a public method on a global object just
like the ubiquitous Main.overview.hide().
https://bugzilla.gnome.org/show_bug.cgi?id=744817
Menu items are on their way out of the calendar drop down, so let's
start with the easy one. This one is removed without replacement,
but then the Date & Time panel should be a one-time stop for most
users anyway, so not having a direct shortcut should not be much of
a problem. It is also the last remaining Settings item outside the
system menu ...
https://bugzilla.gnome.org/show_bug.cgi?id=744817
The new design has the events list on the left and the calendar on the
right, so swap them around and remove the vertical separator between
them in favor of some additional whitespace as in the mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=744817
This used to be the style-class for status icons (i.e. icon-only
top bar items). It got unused a while ago when the class used
by status icons stopped using it - except for the keyboard indicator,
which set the class manually to appear as status icon despite not
being a real icon.
Now that the button highlight is provided by the .panel-button class
on a parent, the obsolete class results in a double border on the
keyboard indicator when active - just drop it from there as well
to fix.
So we can style it differently than :hover.
We already have a active state for the menu items which includes
more than hover. For example, when the keyboard focus moves to a item
or we select programatically a item.
For this reason we need a style class named active for the meaning we
give to it in menu items, and a pseudo class active with the meaning
CSS has.
https://bugzilla.gnome.org/show_bug.cgi?id=744680
Don't assume struts are on the primary monitor while computing
the strut side. Instead, find the first monitor that overlaps the
strut and compute the strut side using it.
https://bugzilla.gnome.org/show_bug.cgi?id=744183
This capability was only really useful for media players, and with
music notifications no longer being special, we can simplify a bit
by removing support for it.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
Music is no longer a special type of notification according
to the design. If we want to resurrect the functionality, we
can reimplement it with a dedicated API like MPRIS rather
than piggy-bagging on the notification system.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
According to the design, hotplug notifications should no longer offer
an eject action and use regular notification buttons (but using icon
and text), the default action when clicking the notification itself
is to launch the file browser.
Also as the corresponding resident notification is gone, it no
longer makes sense to make the notification transient.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
The new notification system will no longer give access to actions
from the notifications list, so a notification that is never
displayed as banner does not make sense here.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
Tray icons make for a terrible UI on their own, but trying to
shoehorn them into the notification system has only made them
worse. At least for the time being this removal is temporary
and support for tray icons will be back, but no longer as part
of the notification system.
https://bugzilla.gnome.org/show_bug.cgi?id=744815
Users currently can't switch VTs while at the login screen.
This commit fixes that, by adding the relevant keybindings
to the login screen's allowed keybindings list.
https://bugzilla.gnome.org/show_bug.cgi?id=744800
drawing cursor is on by default, so the code:
if (options['draw-cursor'])
recorder.set_draw_cursor(options['draw-cursor']);
never lets you unset it.
Fix is to use 'draw-cursor' in options instead.
https://bugzilla.gnome.org/show_bug.cgi?id=744599
When opening a panel menu, we set it's max-height to the available
work-area height to keep menus with scrollable content from growing
outside the monitor. However a menu that extends all the way down
to the bottom edge does not look great either, so also take margins
into account here.
https://bugzilla.gnome.org/show_bug.cgi?id=744498
Ouch, classy - we are telling translators to use a '24h' time
format for the '12h' time format string.
Luckily, only a handful of translations actually followed the
comment (de,hu,id,is,kk,nb,nl), and most of the corresponding
locales do not support 12-hour format anyway (only is_IS, at
least on Fedora).
We assume that applications that export a 'new-window' action can open
a new window, so we add an appropriate entry to the context menu.
However this duplicates functionality if the application already
exposes the action via the desktop file - don't add our own entry
in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=744446
This DBus API is intended to be used by gnome-control-center's
displays panel to show monitor labels.
Each output (i.e. hardware monitor) identified by its
org.gnome.Mutter.DisplayConfig API ID has at most one label. On
mirrored setups, all the labels for outputs corresponding to the same
logical monitor (i.e. showing the same contents in the same mode) are
shown together.
At most, only one DBus client at a time is allowed to show labels.
https://bugzilla.gnome.org/show_bug.cgi?id=743744
Because there's nothing (in single-monitor setups) that could
take the drop in this case.
* js/ui/appDisplay.js:
AllView._loadApps(), FrequentView._loadApps(): Pass
an isDraggable parameter when creating the AppIcons,
depending on whether the favorite-apps key is locked.
AppIcon._init(): Check for isDraggable in the params and
do not create _draggable if it was specified, to prevent a
drag from starting.
AppIcon.popupMenu(): Check _draggable before trying to call
fakeRelease on it.
* js/ui/dash.js: Dash._createAppItem(): Check AppIcon._draggable
before trying to connect to its signals.
https://bugzilla.gnome.org/show_bug.cgi?id=741325
In a lockdown scenario, where the favorite-apps GSettings key is not
writable, hide the menu items for adding and removing favorites from the
dash menu. Additionally, reject drops to the dash for DND.
https://bugzilla.gnome.org/show_bug.cgi?id=741325
After the login banner is shown and hidden, the first user
in the user list becomes non-reactive. This is because the
banner is given an opacity of 0, but still allocated.
This commit fixes that by hiding the banner explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=743370
Normally when a user uses the login screen to log in, the
login screen gets killed and the user session takes over
the display.
This doesn't happen for wayland sessions, though. Instead,
the login screen gets reset, and the wayland session is started
on another VT.
The greeter proxy object needs to be recreated after this reset,
since it's associated with state no longer coupled to the login
screen after the reset.
This commit moves greeter proxy creation to happen at reset time.
https://bugzilla.gnome.org/show_bug.cgi?id=743371
The code described by the comment was moved away in commit eda27d51,
so it is not misleading at best. It wasn't too useful to begin with,
so kill it off rather than moving it to the correct place ...
When using dynamic workspaces, a new workspace will be appended
when moving a window down to the last (empty) workspace. It makes
sense to extend the behavior in the opposite direction, and prepend
a new workspace when moving a window up from the first workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
New workspaces are inserted by shifting all windows on workspaces
below the insertion position down. As a result, when the new
workspace is inserted before the active one, we end up with
the illusion of a workspace switch. Instead, activate the workspace
on which the windows from the active one ended up.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
We are not supposed to mess around with OR windows, so don't try
to shift them to a different workspace. This fixes a warning with
newer versions of mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
We will soon allow to insert a new workspace by other means than
DND in between workspace thumbnails, so move the relevant code
to a new windowManager method.
https://bugzilla.gnome.org/show_bug.cgi?id=665764
Input method preedit text needs to be disabled on password entries
for security and usability reasons.
IBus 1.5.7 provides the signal set-content-type so that panel UIs can
handle these special purpose input entries:
https://github.com/ibus/ibus/commit/6ca5ddb302c9
Unfortunately IBus versions older than 1.5.10 have a bug which causes
spurious set-content-type emissions when switching input focus that
temporarily lose purpose and hints defeating its intended semantics
and confusing users. We thus don't use it in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=730628
We check for (metasNeeded.length == 0) at the beginning of the function,
which is only ever called when when a non-zero number of results is
received back from the provider. Effectively, this means that
(metas.length != metasNeeded.length) will also catch (metas.length == 0)
and print a nicer message to the log.
The updateSearch() function is called in SearchResults every time new
search hits are available from a search provider; SearchResults will
wait for updateSearch() to complete in a callaback, to update the
overall progress of the search operation.
updateSearch() will call _ensureResultActors(), which will in turn call
getResultMetas() on the search provider, which is an operation that can
fail arbitrarily or return inconsistent data, as it's entirely in the
hands of the search provider.
In case _ensureResultActors() returns a failure, updateSearch() is
currently failing to notify the passed-in callback, which might leave
SearchResults in an inconsistent state: make sure the asynchronous flow
always ends up with a notification to the updateSearch() callback.
So that we'll recreate it the next time we want to show it. Otherwise,
we'll try to call things on a half-destroyed ResizePopup and end up
causing errors instead of showing the user their resize popup.
This will allow g-s-d to handle actions differently based on the
current mode - namely, allow the power button when locked, but
make sure to never show any dialogs in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=711682
Adding new parameters to the signal currently will break keybindings
until gnome-settings-daemon is updated to the new API as well.
Put additional parameters into a dictionary instead to make future
extensions easier.
https://bugzilla.gnome.org/show_bug.cgi?id=711682
When animating workspace switches, windows on the old and new workspaces
are temporarily reparented. If windows are restacked, those windows will
thus be ignored by mutter until meta_switch_workspace_completed() resyncs
the stacking at the end of the animation.
As a result, activating a window on another workspace that is not on top
of the stack is very noticeably a two-step operation of switching workspace
and raising the window. There is a technical reason for that order[0], but
we can avoid the visible disruption by manually syncing the stack during
the switch operation.
[0] https://git.gnome.org/browse/mutter/tree/src/core/workspace.c#n590https://bugzilla.gnome.org/show_bug.cgi?id=741680
Just like keybindings and the message tray pointer barrier, gestures
don't always make sense - for instance, swiping up the screen shield
should not trigger the message tray just as the SelectArea action around
the left edge should not open the overview.
To avoid this, restrict gestures based on the current keybinding mode.
https://bugzilla.gnome.org/show_bug.cgi?id=740237
Frequently banner messages are longer than can reasonable
fit in a one column view, which leads to a smooshed layout.
This commit changes the layout to a two column view, with the
banner on the left and the prompt on the right, if the banner
message is long enough that it can't fit well above the prompt.
If there isn't enough space for two columns then we keep the
one column layout but add scrollbars.
https://bugzilla.gnome.org/show_bug.cgi?id=703972
The login screen supports showing a banner message which admins
can use to mention login rules or disclaimers.
This message only shows up currently if the user list is enabled.
Most people who want to show a banner message also want to disable
the user list.
This commit moves the banner message to display when the user is
prompted for login credentials instead of when showing the user
list. It also adds a scrollbar if the message is too long.
https://bugzilla.gnome.org/show_bug.cgi?id=703972
The login screen is pretty custom full screen container and the standard
layout managers aren't really a good fit for the kind of layout that's
happening. This will be even more problematic with upcoming changes
to login banners, so we need to switch techniques.
This commit moves login dialog over to using a custom allocate handler
that has specific domain knowledge of the parts of the login screen
and where they go.
https://bugzilla.gnome.org/show_bug.cgi?id=703972
In certain cases the timeout for starting the calendar helper can
be reached but the calendar helper still loads fine. If so, just
ignore the timeout and wait until we get a notification from
dbus of the successful start.
https://bugzilla.gnome.org/show_bug.cgi?id=735308
While the default Shell style is fairly decent with regard to
accessibility requirements, having the ability to tweak certain
aspects where the regular style works less well is still useful.
For this purpose, try to load a -high-contrast theme variant of
the default stylesheet when a high-contrast theme is requested
(as determined by the GTK+ theme name).
https://bugzilla.gnome.org/show_bug.cgi?id=740447
_hideDone checks _shown to determine if anything has shown the overview
while we hid it, and if so, shows the overview forward just in case.
In a local patch that called _hideDone immediately inside _hide for
testing, this broke. While we don't actually depend on this anywhere,
it doesn't hurt so that the next person to hack this up (perhaps me!)
doesn't get stuck debugging it for 20 minutes.
Since moving to a GFile based API in commit 642bf2b778,
setThemeStylesheet() no longer accepts %null to revert to
the default theme. We should have some way to revert to the
default and the least intrusive option is to return to the
old behavior, so do that.
Correctly computing the ISO week number is tricky and we already
have code in the platform to do it, so just refer its computation
to GDateTime rather than doing it ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=736722
Using a separate property to show when the application is busy rather
than cramming it into the state property makes the code clearer. In most
places we only care if an app is running or not, not whether it is
actually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=736492
If the user list is disabled and the user clicks cancel quickly enough
after typing their username, they can get in a state where the
auth prompt gets stuck in the insensitive state.
This is because the login dialog code makes the prompt insensitive
while while pam is processing the provided username, but the prompt
only makes itself sensitive again when it is hidden.
This commit makes it sensitive right before asking for a username again.
https://bugzilla.gnome.org/show_bug.cgi?id=740141
Once verification has succeeded, the train's already
left the building and we shouldn't allow canceling.
This commit renders the cancel button non-reactive
and makes the cancel function be a noop after
verification succeeds.
https://bugzilla.gnome.org/show_bug.cgi?id=740141
Due to a typo we were always removing the first (index 0) connection
from the global list of connections instead of the correct one.
This resulted in some connections remaining in the shell's connection
list long after they were removed. In particular, this resulted in
multiple copies of a bluetooth connection appearing after suspend/resume
(when the device was readded and the cached connection list was
rescanned).
https://bugzilla.gnome.org/show_bug.cgi?id=740227
I was going to add another DBus property to signal when the shell was
done loading and was idle, and while implementing that I noticed we
aren't emitting PropertyChanged for, well, any property. Let's fix
OverviewActive.
It's unfortunate it's so tedious to correctly implement a DBus
property =/
https://bugzilla.gnome.org/show_bug.cgi?id=704163
Currently, shellDBus only uses the passed in monitor index if it's
strictly > 0. A zero-index monitor is a valid one though, so don't
restrict this to strictly positive indices.
https://bugzilla.gnome.org/show_bug.cgi?id=740074
Commit 1291bcd0c8 implemented it for dateMenu, but the function
is already used in screenShield as well. Just add it globally as
we do for other standard gettext "macros".
Normally users switch xkb input sources and ibus input sources.
But currently the first input source only is running. It's also good
to preload all ibus engines in the logging session so that users switch
input sources quickly without the launching time of input sources.
The following is the ibus change:
https://github.com/ibus/ibus/commit/cff35929a9https://bugzilla.gnome.org/show_bug.cgi?id=695428
WorkspacesDisplay relies on being hidden to disable workspace switches
by scrolling or panning. Usually viewSelector will hide the previous
page on page switch, but we currently miss the case when opening the
overview at the app picker, where the workspaces page is still shown
for the transition, but never hidden.
Fix this by calling hide() in addition to setting the opacity to 0 at
the end of the overview animation.
https://bugzilla.gnome.org/show_bug.cgi?id=737534
Calling g_dbus_proxy_new without any flag means that the caribou
daemon will be launched through D-Bus activation, when creating
a proxy. It smoked out some corner cases in caribou and at-spi2-core,
but generally it would be good to avoid creating unused process.
This patch delays the invocation until the "Run" method is called.
https://bugzilla.gnome.org/show_bug.cgi?id=739712
Leading zeros are common in the 24h format, and indeed used in the
wallclock in the top bar. Convention and consistency within the
same clock format trumps inconsistency between different time formats,
so reverting commit 316f825b2a.
https://bugzilla.gnome.org/show_bug.cgi?id=658675
Splits instantiation of the event source into a separate method,
allowing extensions to subclass the DateMenuButton and provide its
own calendar source.
https://bugzilla.gnome.org/show_bug.cgi?id=672500
There is currently no simple way to inject into AppIcon's state change,
so an extension that wants to do this has to destroy/remove/update all
icons in the Shell (i.e. in the Dash, AllView, FrequentView) on enable()
and disable() after updating AppIcon.prototype._onStateChange, or the
extension must require a restart of the Shell.
To solve this issue, we rename _onStateChanged to _updateRunningStyle,
and connect the notify::state signal with an anonymous function that
calls _updateRunningStyle.
This extra function call should allow extensions to just extend the
updateRunningStyle function in the prototype.
https://bugzilla.gnome.org/show_bug.cgi?id=739497
This patch inlines the function _ellipsizeEventTime into its only caller
_addEvent. This also removes the need for the global const
EventEllipses and is thus removed by this commit as well.
https://bugzilla.gnome.org/show_bug.cgi?id=727302
With commit dc6a60dde, the calendar displays the ending day and time of
a continuing multi-day event on its ending day. This results in the list
not appearing to be sorted. This patch sorts the list according to the
displayed day/time.
With the two appointments
Thursday 0800-1000 Foo, and Wednesday 0900-Friday 1200 Bar and today
being Monday, the rest of the week list currently displays:
F ...1200 Bar
T 0800 Foo
With this patch, the displaying order is switched because Friday comes
after Thursday.
https://bugzilla.gnome.org/show_bug.cgi?id=727302
Currently, multi-day events are shown as individual appointments on each
day. This patch ellipsizes multi-day events to indicate continuation on
the prior or following day (or other time-period.)
The time label spot is now replaced by a box layout that contains the
prefix ellipsis label, the time label and the postfix ellipsis label.
In order to keep the alignment, ellipses are merely invisible (zero
opacity) when hidden.
The ellipses are styled using the events-day-time-ellipses class which,
by default, take the color of the event text.
When RTL is used, the box contents are adjusted accordingly (clutter
does that for us).
An event spanning three days now displays "...All Day..." in the
calendar on the second day.
https://bugzilla.gnome.org/show_bug.cgi?id=727302
It is really annoying for the user to acknowledge multiple notifications
when they queue up. So, to prevent a notification flood that has to be
handled by the user one-by-one, a summarized-notification feature is
added which leaves a single summarized-notification for the user,
replacing multiple notifications if the number exceeds 1, which they may
or may not acknowledge. When this summarized-notification is acknowledged,
the message-tray is opened where they can view the notifications that were
summarized. This helps the user concentrate on his primary task
simultaneously informing them about the new notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=702460
We commonly mark strftime format strings for translation to account
for date/time representations without an existing strftime shortcut
("Yesterday %H%p"). As those translations are looked up according to
the locale defined by LC_MESSAGES, while the conversion characters
themselves are resolved according to LC_TIME, the result can be
rather odd when mixing locales ("Den 27. January"). The correct
solution would be to install translations for format strings in
the LC_TIME catalogue and look them up with dcgettext(), but we
don't have the infrastructure to do that easily. Work around this
by adding a helper method that looks up a string in LC_MESSAGES
using the locale defined by LC_TIME and use that to translate
format strings, which has the same result.
https://bugzilla.gnome.org/show_bug.cgi?id=738640
Since the background rework, SystemBackground is no longer a transparent
actor that you have to stack on top of a solid background, it is an
opaque actor. Fix the color of the background actor, and remove places
where we were setting the background color underneath the system background
and expecting blending - in particular, we can always set no_clear_hint
on the stage.
https://bugzilla.gnome.org/show_bug.cgi?id=738652
When monitors change, the previous index might not mean the same
physical monitor anymore, in fact, it might become invalid. In the
latter case, we'll actually get a JS error when accessing
this.keyboardMonitor in _updateKeyboardBox() . To avoid this, let's
just always reset the OSK to the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=738536
Incorrect braces meant that if the ShellUserVerifier was destroyed before
the call to fprintManager.GetDefaultDeviceRemote(), the reply would result in
an error.
https://bugzilla.gnome.org/show_bug.cgi?id=738256
Most of the code handles the sources setting being empty and
InputSourceManager.currentSource being null because previously the
"model" (i.e. the sources list) was kept in gnome-settings-daemon.
But this is fragile and since we're now the canonical place where the
list lives we can force it to never be empty even if the gsetting is
empty or contains only invalid entries. Adding the default keyboard
layout in that case is the safest thing to do.
https://bugzilla.gnome.org/show_bug.cgi?id=738303
Commit a4475465f1 fixed the wrong alignment for the fully visible
control, but regressed the partially slid-out one; take the slideX
factor into account to get the right offset for both cases.
Controls that slide left are located on the left, so the offset to
align them with the corresponding edge is always 0. It's controls
on the right that need a different offset when the available width
exceeds the child's width.
https://bugzilla.gnome.org/show_bug.cgi?id=728899
Currently we use the same amount of total delay divided by all items,
but that makes the items animate slow if the amount of items is small.
To avoid that, use a smaller total amount delay for an amount of items
smaller than four.
https://bugzilla.gnome.org/show_bug.cgi?id=737017
This commit ensures the login screen gets focused after
the screen shield is raised.
The code affects the unlock screen as well, but it's
less important since the unlock screen gets destroyed
and recreated each time the curtain moves, so it
has an opportunity to take focus on its own.
https://bugzilla.gnome.org/show_bug.cgi?id=708105
We currently allow infinite number of screenshot requests to be active at
the same time, which can "dos" the system and cause OOM.
So fail subsequent requests for the same sender when a screenshot operation
is already running.
https://bugzilla.gnome.org/show_bug.cgi?id=737456
We currently just clear out the map of recorders (which results
in the top bar indicator to be hidden), but don't stop the actual
recordings.
Spotted by Adel Gadllah on IRC.
Instead of waking up the JS every second to set the clock and update a
date label the user will rarely see, simply use property binding to
bypass JS string handling, and update the date in the menu when the menu
is opened.
Checks for a duplicate search before setting the current search
to true and before cancelling the current search. This ensures that
if a duplicate search occurs while the previous search is still active,
the duplicate search will not incorrectly cancel or change the state
of the previous search.
Indicate to NetworkManager that the Shell's agent supports VPN
hints, and pass those hints to VPN auth dialogs that also indicate
that they support hints.
VPN plugins can request new secrets, for example if the previous
ones are incorrect (eg, user mis-typed the password) or some other
reason (next token code required to re-sync a hardware token).
The specific secret that the VPN wants, and a VPN-specific message,
are passed in hints from the plugin, to NetworkManager, to the
agent (GNOME Shell) and then to the auth dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=737592
If we have a modal, the stage's input region doesn't really matter --
all events go to us anyway. To avoid doing extra work doing animations
when we have a modal, like menus, the overview, and the message tray,
just fizzle out all updates.
To make sure we catch updates, update the input region whenever we end a
modal.
https://bugzilla.gnome.org/show_bug.cgi?id=737001
When the overview is created, search is populated with one actor for
each provider. As they're not hidden though, they will contribute to the
overall size request of the search page, which will shift upwards the
overview grid.
Reviewed-By: Jasper St. Pierre <jstpierre@mecheye.net>
Since (mutter) commit 49400657caae27 we disable the "Always on Top"
action for maximized windows, however when commit e7af257814
moved the window menu into the shell, this behavior was accidentally
extended to partially maximized (including tiled) windows.
As it can be desirable in this case to keep the window visible while
interacting with a different one, restore the previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=737382
MetaBackgroundCache doesn't itself use file watches, so when a image
that we are monitoring changes we need to purge it from the cache,
so that when we load it again we get the new image.
https://bugzilla.gnome.org/show_bug.cgi?id=710756
When the keyboard is destroyed, we destroy the keyboard actor, but the
keyboard's menu isn't part of the key itself, so it's never tracked.
The menus are actually tracked actors, so they slow down the layout
manager's code to rebuild regions and other things. Keeping this list
small is a good idea.
To prevent leaking menus, destroy the menu when the key is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=736999
The spring animation has to use clones to escape any clip set on the
parent, as it mainly occurs outside the parent. The same does not apply
to the pulse animation, which is very much in place - in fact, if the
parent is clipped (for instance a scrolled app folder), not having the
clip applied to the animated icons is indeed wrong.
Just animate the original grid actors instead, which gives the expected
result.
https://bugzilla.gnome.org/show_bug.cgi?id=736885
Trying to open an empty folder currently leaves the parent view in a
rather confused state. While we should look into fixing this in the
future, empty folders are not useful at all to begin with, so hide them.
https://bugzilla.gnome.org/show_bug.cgi?id=736910
The summary container will trap the focus if any sources are present,
making the message tray menu unreachable by keynav. Apply the same
hack as in searchDisplay and add a focusTrap to move the focus manually
as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=707799
Can't wait to double the size of this list when these start using D-Bus
activation.
These were actually renamed in GNOME 3.12, but we couldn't do anything
about it before, and now we can.
It was assumed that BackgroundSource objects were always destroyed
on monitor changes because the BackgroundManager objects that hold
references were destroyed, but sequencing of updating of different
BackgroundManager objects meant that was not the case.
Properly update any cached Background objects held by the
BackgroundSource on a change to the monitor layout; in particular this
means updating animations in case they are multi-resolution.
All other submenus link to the corresponding settings, so we should
do the same for location - the privacy panel in this case, which now
sports a "Location Services" switch ...
https://bugzilla.gnome.org/show_bug.cgi?id=736542
This lets us considerably clean up the event flow here and change how
things are structured. It also makes sure that we never show "No
Results" -- search.js not being aware of the timeout means that it might
not think that any work was being done when we show the page.
Keep a flag depending on whether a provider is in-flight, and use that
to determine what status label to show.
This ensures that we only show "No Results" when we're done searching
and we're sure that all providers have returned results back to us.
The complexities of tracking these two things separately, with the
display on one half, and the searching on the other half, is difficult
to manage. Squash it all together.
It is quite weird to have those calls/signals using WindowClone as an
argument, it is neater to pass MetaWindows around, and have each user
deal with their own representations of these.
https://bugzilla.gnome.org/show_bug.cgi?id=735972
And use it to lookup the local WindowClone that applies. Otherwise,
WorkspaceThumbnail.WindowClone objects may be mistakenly set, which
are not usable interchangeably with Workspace.WindowClone ones. This
may lead to several misbehaviors as fields available in the second
object but not in the first one are accessed, some those undefined
values get used in math ops, which result in NaNs over the place.
Likewise, the similar functions in WorkspacesViewBase subclasses take
now MetaWindow arguments too.
https://bugzilla.gnome.org/show_bug.cgi?id=735972
Instead of calling out to gnome-settings-daemon we'll just implement
the switching logic ourselves and use mutter APIs that allow this
functionality to work both in X sessions and when we're a Wayland
compositor.
Switching IBus engines is done transparently as well just like g-s-d
used to do.
https://bugzilla.gnome.org/show_bug.cgi?id=736435
gnome-settings-daemon doesn't this for us anymore. Note that
ibus-daemon isn't DBus activatable but just spawning it is fine
because it does its own single instance management. The library
notifies us when it shows up and goes away through the connected and
disconnected signals.
https://bugzilla.gnome.org/show_bug.cgi?id=736435
We don't really need this step as a separate method since all
implementations are supposed to be created and shown immediately. This
also ensures that we have items to show in all subclasses.
https://bugzilla.gnome.org/show_bug.cgi?id=735976
The enums values of geoclue have gaps in them (so more levels could be
added in future) but enum values of settings don't have such gaps so we
gotta translate between them.
Since desrt says that enums as integers in gsettings are bad, we now
treat accuracy level settings as string.
This fixes the recent regression of geoclue only allowing geiop level
accuracy to apps.
https://bugzilla.gnome.org/show_bug.cgi?id=736479
Since commit e04e507659, we will already get the right icon for the
submenu arrow, so we must not mirror it again. However we do need to
take the text direction into account for the rotation now (but that's
not actually too bad - the resulting code gets quite a bit easier).
https://bugzilla.gnome.org/show_bug.cgi?id=736343
Trust the heuristics in shell_app_can_open_new_window() to get it right
more often than not, and add an appropriate check in activate(). This
makes the behavior consistent with the dash, e.g. we will try to open
a new window (and show the corresponding animation) for apps that don't
have a "New window" item in their dash context menu.
https://bugzilla.gnome.org/show_bug.cgi?id=736329
Commit 9e5704b introduced a regression due to a sloppy mistake not
making actors reactive on animation out.
Fix that making actors reactive when animating out as well.
Our current UI is horrible in dealing with outdated extensions - we
don't give users any indication at all that something is not working as
expected (unless hiding the prefs button as we did until the last commit
counts).
To fix this, make the enable switch insensitive to indicate OutOfDate
extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=736185
It is confusing to treat outdated extensions as if they didn't exist
in some places, but like any other extensions elsewhere. In particular
gnome-tweak-tool still allows to launch prefs for them while making
it clear to users that the extension will not work - opening the
list of installed extensions in that case is unexpected and confusing.
Just remove the version check for now, we will soon follow tweak-tool
and use it to disable the extension switch instead.
https://bugzilla.gnome.org/show_bug.cgi?id=736185
The current code only works for enabled extensions, which means
that extensions that were marked OUT_OF_DATE cannot be enabled
without a restart when disabling the version check.
Fix this by reloading all extensions while making sure to only
enable any extensions when we're supposed to.
https://bugzilla.gnome.org/show_bug.cgi?id=736185
Currently we consider the last item animating being the last actor of
the list, but that's wrong since the last item animating depends on the
distance between the source actor and the original position of the
animated actor.
Take that into account to check the last item of the animation.
The code that cleaned up when a background actor was destroyed tried to access
the Background as backgroundActor.background._delegate but when the destroy
signal is emitted, the MetaBackgroundActor was already disposed and
backgroundActor.background NULL.
The rewrite of Mutter's background code (see bug 735637) requires
corresponding changes here - we no longer need to layer multiple
MetaBackgroundActors together.
The general strategy is that a BackgroundSource object is created
per GSettings schema, and keeps either one Background/MetaBackground pair,
or, for animation, a Background/Metabackground pair for each monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=735638
When you open or close a PopupSubMenu the arrow icon rotates, but
the code previously assumed that the starting angle was a multiple
of 90. If you click the submenu fast enough the rotation could overlap
with the previous rotation and you'd get something that wasn't a multiple
of 90.
Now we ensure that the ending arrowRotation angle is always a multiple
of 90 regardless of what the starting angle is.
https://bugzilla.gnome.org/show_bug.cgi?id=728927
Although the actor are with opacity 0, they were reactive, so the if the
user quickly make a click on the grid while animating it can launch an
app accidentally.
To avoid that make the actors non reactive while animating.
Show the on-screen keyboard if gnome-settings-daemon requests that it
should be shown, such as when using a touchscreen input device. Do this
in addition to monitoring the accessibility setting for the OSK.
https://bugzilla.gnome.org/show_bug.cgi?id=702015
Commit 12845f0eef reset translationX to 0 to fix the slide-in
animation of the dash when dragging a search result, but 0 is the
wrong value for the thumbnail slider - the next time it will be
shown, it will just pop up instead of sliding in due to translationX
already being at its target value.
Fix this by making _updateTranslation take the actual visibility into
account and call that to set the correct translation in dragBegin.
Controls are slided in by animating translationX from the actor's
width to 0; however as _updateTranslation() will skip the animation
when the property is already at its target value and 0 happens to be
the initial value of translationX, the initial animation is skipped.
Fix this by initializing translationX to undefined, which will always
differ from a valid target value.
The comment is right, updating the translation should be deferred
to pageEmpty, or else overview controls will just pop up instead
of sliding in. So revert that part of commit 6a7fa52879.
Providers that need drag-and-drop behavior can implement this via the
createResultObject() hook (as the app search provider already does), no
need to duplicate that code in the generic result objects
(ListSearchResult already does not implement DND).
https://bugzilla.gnome.org/show_bug.cgi?id=734726
Following design mockups, animate the icons on AllView, FrequentView,
Dash and Search to zoom out when opening a new window of the app or when
the app is not running and the user execute it.
https://bugzilla.gnome.org/show_bug.cgi?id=734726
Given that we animate indicator in, it makes sense to animate them out
as well.
Also make possible animating indicators between view changes as well.
https://bugzilla.gnome.org/show_bug.cgi?id=734726
Following design decision, we want to animate AllView and FrequentView
when opening and closing with a swarm spring form.
This involves a few changes needed to allow that, since from some time
now, we are animating page changes in viewSelector, using only a fade
transition. However now we want to let appDisplay and iconGrid apply its
own animation.
For that we special case the change to and from apps page on
viewSelector to let appDisplay to animate its own items, using and API
on appDisplay which at the same time uses an API on iconGrid.
Thanks Florian Müllner for the debugging work
https://bugzilla.gnome.org/show_bug.cgi?id=734726
Add a new animation to folder view based on designers mockups that
emulates pulsating icons.
The code on iconGrid is though to work well for the upcoming patches to
animate AllView and FrequentView.
https://bugzilla.gnome.org/show_bug.cgi?id=734726
If you turn on natural scrolling, instead of swiping up, you need to
swipe down, which is bizarre. Just accept any type of scroll and have
them contribute to the delta.
https://bugzilla.gnome.org/show_bug.cgi?id=734874
This reverts commit a84fb99c0a.
This commit didn't make the OSK fully operational yet on Wayland, and
caused the double emission of key events on X11 due to the OSK keys
receiving first touch events from the passive touch grab, and then
emulated pointer events from event selection after the touch sequence
was rejected in the grab.
When we make a better effort at handling touch events just once on X11,
this commit can be reapplied and remaining wayland OSK support resumed
from there. In the mean time, this patch is better reverted.
https://bugzilla.gnome.org/show_bug.cgi?id=735681
Commit bbfa616f27 renamed _ignoreRelease to _ignoreUntilRelease
in some places, but not others, which broke GrabHelper.ignoreRelease().
Complete the name change to fix the fallout (e.g. app launcher menus
closing on button release).
The code from PanelMenu.Button assumed menus would open below their
source actor, making KEY_Down a good choice; however with the new
generic code, we should base the key used on the actual menu position.
https://bugzilla.gnome.org/show_bug.cgi?id=735614
The behavior of opening/closing/navigating a menu from its source
actor is generic enough to not limit it to PanelMenu.Buttons, so
move the code into PopupMenu itself.
https://bugzilla.gnome.org/show_bug.cgi?id=735614
Since mutter commit 527c53a2a0582eba, MetaWorkspace::window-removed
is emitted *before* MetaWindow:workspace is updated, so the test
whether the removed window should still be on the workspace in
question will always return true.
Assume the test is no longer necessary nowadays to fix this very
obvious regression.
https://bugzilla.gnome.org/show_bug.cgi?id=735608
Currently we are removing tweens of the button and border, but not from
the title. That causes the title to be in wrong positions sometimes when
dragging windows on the overview, given that the slider is moving and
therefore the windows + overlay are moving too.
To avoid that, remove tweens of the title as well.
The code that loads SHELL_BACKGROUND_IMAGE, which is used to load the
performance background was loading it in WALLPAPER mode, not ZOOM
mode. Zoom mode is what we use for the actual GNOME defaultiwallpaper
and what we want to test: the background will be scaled except when
the resolution matches the 2560x1440 default backgrounds.
https://bugzilla.gnome.org/show_bug.cgi?id=735385
Users can now toggle geolocation off/on from privacy panel of
gnome-control-center so we don't need to clutter the menu with a
settings that most users won't touch most of the time.
https://bugzilla.gnome.org/show_bug.cgi?id=731122
The scale passed to _updateChildrenScale is exclusively computed from
properties, so it can be moved into the function itself - as the scale
now becomes a mere detail, rename to a more appropriate _updateIconSizes
at the same time.
The existing code broke when commit 792b963bda changed the custom
result actor hook to return an object instead of an actor - stop
trying to go through a _delegate to make it work again.
Commit 14ceb10555 changed the "Open Calendar" item to open the
"recommended" calendar application rather than the default one to
avoid problems with MIME subclassing (namely falling back to the
default text editor when no calendar app is installed).
With this change however, the application launched does no longer
necessarily match the one configured in Settings, which is unexpected.
To avoid both problems, use the default calendar application again,
but only if it is in the list of recommended applications.
https://bugzilla.gnome.org/show_bug.cgi?id=722333
We need to put the actual actors in the history, not just the labels,
otherwise all emptyLine (which are not messages but are not empty
either) and all lines with a timestamp will get stuck in the scrollback.
https://bugzilla.gnome.org/show_bug.cgi?id=733899
We assumed that either a portal would give us a target URI, or we
would eventually reach the URI of our choice (which is http://www.gnome.org)
This is not always the case: even after a successful login we may
stay in a confirmation page, so make sure that every time we see a
redirect we trigger a connectivity check (or queue one for when
the user closes the window)
https://bugzilla.gnome.org/show_bug.cgi?id=733848
Search providers that should be disabled by default come with
a DefaultDisabled=true key in their keyfile, and are enabled
with the "enabled" whitelist, not with the "disabled" blacklist.
https://bugzilla.gnome.org/show_bug.cgi?id=734110
Performance testing was producing inconsistent values at different
times in the day since the GNOME default background is animated and
sometimes has a single layer, and sometimes two blended layers.
So we have consistent numbers, install a simple animated background
with GNOME Shell that has 40-year long transition ending in 2030,a
and set an environment variable in gnome-shell-perf-tool so that the
background is override with that background. (The background depends
on files installed by gnome-backgrounds; we assume that the person
running performance tests is doing so within the scope of a full
GNOME install.)
https://bugzilla.gnome.org/show_bug.cgi?id=734610
All derived classes are already checking explicitly for action names
(FOO and FOO_BACKWARDS). mutter used to have a META_KEY_BINDING_REVERSES
flag for keybindings which required special handling of "shift"+FOO as
FOO_BACKWARDS, but this has been removed now, so this special handling
is no longer necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
When this flag is set on a MetaKeyBinding, mutter will know that
the keybinding has an associated reverse keybinding triggered with
the shift modifier. However, an undesirable side-effect is that
gnome-control-center keyboard panel does not know that this 'shift'
is reserved for these reverse keybindings and cannot detect
conflicting bindings in this case.
This 'reverse' logic can now be handled at a higher level (in gcc keyboard
panel) so this commit removes it from gnome-shell so that they do not
conflict.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
Now that mutter gives a way to check if a MetaKeyBinding was marked as
'reversed' or not, gnome-shell does not have to hardcode that a
MetaKeyBinding using a shift modifier is reversed, it can directly check
if the appropriate flag is set.
https://bugzilla.gnome.org/show_bug.cgi?id=732296
We were setting the value of adjustment on size changes, but we weren't
changing the page value, so adjustment and page value was not in sync.
To fix it, make sure adjustment of the view is in sync with the page
value.
https://bugzilla.gnome.org/show_bug.cgi?id=734680
Since these settings are now going to be accessed by
gnome-control-center as well, its more appropriate for them to live in
gsettings-desktop-schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
Having the on/off setting be backed by a boolean in dconf makes sense
anyway but this is mainly to be able to remember the max accuracy set
before user disabled geolocation so that when they enable it next time,
we have the max accuracy level on same value as before.
There hasn't been a real need for this but now we are about to add
geolocation settings in control center and it'll be easiser for
control-center to simply toggle a boolean property rather than to have
to know about and deal with accuracy levels.
Later we might also want to add accuracy level settings to privacy panel
so keeping the accuracy level setting around still. However we no longer
support 'off' accuracy level as the new boolean property covers that.
This also implies that we no longer track available accuracy level,
which made the code a bit hard to follow/maintain.
https://bugzilla.gnome.org/show_bug.cgi?id=734483
The zooming animation of the windows looks nice when animating
from the workspace display page, but looks weird from other pages
like apps page or search page since the windows come from nowhere
with an initial position not known to the user.
Instead of that just fade the desktop with the windows in its
original position.
https://bugzilla.gnome.org/show_bug.cgi?id=732901
Currently we are overriding the explicit calls to slideIn
given that it's called also with the signal of showing overview.
It was necessary because of the bug that previous patch fixed,
so now we can just delete that.
https://bugzilla.gnome.org/show_bug.cgi?id=732901
The slide of thumbnailWorkspace is shown when entering overview,
connecting to the same signal that creates the thumbnails, the showing
signal of overview, but, to make the slide animation we need to know how
much width the slider has. To do that we ask the thumbnailsWorkspace
about its width, but given that it connects to the same signal it could
ask the width without having created the thumbnails yet, so reporting a
width of 0 and confusing the slide animation.
Currently it works because gjs calls the callbacks following the order
of the clients connecting that signal, and the thumbnailsWorskpace is
connected before the slide ones.
To avoid that we allow to request the preferred size of the
thumbnailsBox at any time with any number of thumbnails. The only thing
required is to make sure the porthole is accessible when requesting the
preferred size.
https://bugzilla.gnome.org/show_bug.cgi?id=732901
We were calling twice showPage() with the correct page, here and in
show() / zoomFromOverview given that _resetShowAppsbutton was called
from the signal 'showing' of overview. Given that the call to
_resetShowAppsbutton is only actually used when hiding the overview we
can actually put the checked state of the button to false when animating
from overview so it shows the workspace page, causing the same behavior
of _resetShowAppsbutton without all the shenanigans of resetting when
the hiding overview signal is triggered.
https://bugzilla.gnome.org/show_bug.cgi?id=732901
Currently the indicators are a BoxLayout inside a BinLayout in AllView.
BinLayout doesn't have any size constraint, so if the indicators request
a bigger size than AllView the entire overview is grown, causing the
overview to go crazy.
To avoid that, create an actor for the page indicators that request as
minimum size 0, and as a natural size, the sum of all indicators natural
sizes. Then we clip_to_allocation, so it doesn't grow more than the
parent.
https://bugzilla.gnome.org/show_bug.cgi?id=723496
