When the atlas is reorganised we could potentially be moving around
textures that are already referenced in the journal. We therefore need
to flush the journal otherwise they will be rendered with incorrect
texture coordinates. We also need to flush the journal even if we are
not reorganizing so that we can rely on the old texture contents
remaining in the atlas after migrating a texture out.
When creating a Cogl sub-texture, if the full texture is also a sub
texture it will now just offset the x and y and reference the full
texture instead. This avoids one level of indirection when rendering
the texture which reduces the chances of getting rounding errors in
the calculations.
Since get_paint_opacity() recurses through the hierarchy it might lead
to a lot of type checks while we walk the parent-child chain. We can
split the recursive function from the public entry point and perform the
type check just once.
• Remove unused variables.
• Do not pre-initialize ClutterActor's GType; pre-emptive optimizations
like these are more black magic than real optimization.
Remove an useless assignment. The n_expand_children is not used outside
the extra_space check, and if n_expand_children is 0 then the extra
space we allocate is 0.
• Remove one unused variable.
• We ignore the result of get_timeline_internal() so we need to tell
the compiler that - though a better solution would be to split the
timeline implicit creation into its own function.
Do not de-reference a void*; use a temporary variable -- after
checking the contents of the pointer. This actually simplifies
the readability and avoids pulling a Lisp with the parentheses.
The function _cogl_get_max_texture_units is called quite often while
rendering and it returns a constant value so we might as well cache
the result. Calling glGetInteger on Mesa can be expensive because it
flushes a lot of state.
An initial pass over the Cogl source code using the Clang static
analysis tool flagged a few low hanging issues such as un-used variables
or redundant initializing of variables which this patch fixes.
All the cogl_rectangle* APIs normalize their input into into an array of
_CoglMutiTexturedRect rectangles and pass these on to our work horse;
_cogl_rectangles_with_multitexture_coords. The definition of
_CoglMutiTexturedRect had 4 separate float members, x_1, y_1, x_2 and
y_2 which meant for some common cases we were having to copy out from an
array into these members. We are now able to simply point into the users
array avoiding a copy which seems desirable when submiting lots of
rectangles.
This uses the G_GNUC_DEPRECATED macros to mark the
cogl_{texture,vertex_buffer,shader}_ref and unref APIs as deprecated.
Since this flagged that cogl-pango-display-list.c and
clutter-glx-texture-pixmap.c were still using deprecated _ref/_unref
APIs they have now been changed to use the cogl_handle_ref/unref API
instead.
The function prototypes for the primitives API were spread between
cogl-path.h and cogl-texture.h and should have been in a
cogl-primitives.h.
As well as shuffling the prototypes around into more sensible places
this commit splits the cogl-path API out from cogl-primitives.c into
a cogl-path.c
We've had complaints that our Cogl code/headers are a bit "special" so
this is a first pass at tidying things up by giving them some
consistency. These changes are all consistent with how new code in Cogl
is being written, but the style isn't consistently applied across all
code yet.
There are two parts to this patch; but since each one required a large
amount of effort to maintain tidy indenting it made sense to combine the
changes to reduce the time spent re indenting the same lines.
The first change is to use a consistent style for declaring function
prototypes in headers. Cogl headers now consistently use this style for
prototypes:
return_type
cogl_function_name (CoglType arg0,
CoglType arg1);
Not everyone likes this style, but it seems that most of the currently
active Cogl developers agree on it.
The second change is to constrain the use of redundant glib data types
in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all
been replaced with int, unsigned int, float, long, unsigned long and char
respectively. When talking about pixel data; use of guchar has been
replaced with guint8, otherwise unsigned char can be used.
The glib types that we continue to use for portability are gboolean,
gint{8,16,32,64}, guint{8,16,32,64} and gsize.
The general intention is that Cogl should look palatable to the widest
range of C programmers including those outside the Gnome community so
- especially for the public API - we want to minimize the number of
foreign looking typedefs.
OpenGL is an implementation detail for Cogl so it's not appropriate to
expose OpenGL extensions through the Cogl API.
Note: Clutter is currently still using this API, because it is still
doing raw GL calls in ClutterGLXTexturePixmap, so this introduces a
couple of (legitimate) build warnings while compiling Clutter.
This replaces code like this:
if (CLUTTER_ACTOR_IS_VISIBLE (self))
clutter_actor_queue_redraw (self);
with:
clutter_actor_queue_redraw (self);
clutter_actor_queue_redraw internally knows what can be optimized when
the actor is not visible, but it also knows that the queue_redraw signal
must always be sent in case a ClutterClone is cloning a hidden actor.
ClutterGroup::foreach was recently changed (ref: ce030a3fce) to use
g_list_foreach() to iterate the children instead of manually iterating
the list so it would safely handle calls like:
clutter_container_foreach (container, clutter_actor_destroy);
(In this example clutter_actor_destroy will result in the current
list item being iterated being freed.)
There is a lot of duplication between ClutterGroup and ClutterBox so
this makes the two files diff-able so that new fixes can easily be
ported to both and bug fixes missing in one or the other can be spotted
more easily. This doesn't change the behaviour of either actor; it's
really just a shuffle around of code and normalizes the coding style to
make the files comparable.
This has already uncovered one bug in ClutterBox, and also highlights
a bug in ClutterGroup + many other actors:
1) ClutterGroup::real_foreach was recently changed to use
g_list_foreach instead of manually iterating the child list so it can
safely handle calls like:
clutter_container_foreach (container, clutter_actor_destroy);
ClutterBox is still manually iterating the list.
2) In ClutterGroup we guard _queue_redraw() calls like this:
if (CLUTTER_ACTOR_IS_VISIBLE (container))
clutter_actor_queue_redraw (CLUTTER_ACTOR (container));
In ClutterBox we don't:
I think ClutterBox is correct here because
clutter_actor_queue_redraw already optimizes the case where the
actor's not visible, but it also considers that the actor may be
cloned and so the guard in ClutterGroup could break clones. This
actually highlights a wider clutter bug since the same kinds of
guards can be found in all other clutter actors.
The signbit macro is defined in C99 so it should be available but some
versions of GCC don't appear to define it by default. If it's not
available we can use a hack to test the bit directly.
If the stage associated to the InputDevice is not set we should
short-circuit out and return NULL. This will result in a pick()
done on the event's stage - if applicable.
http://bugzilla.moblin.org/show_bug.cgi?id=9602
Instead of returning a sub-pixel height round up the preferred height to
the nearest integral value that is not less than the size reported by
Pango, once converted in pixels.
This fixes some backwards logic for asserting that we have a GLX major
version == 1 and a minor version >= 2. (NB: Although we technically
depend on GLX 1.3 features, we still have to support drivers that report
GLX 1.2 because there are a lot of mesa drivers out there incorrectly
report GLX 1.2 even though they export extensions that depend on GLX
1.3)
A material layer can not be considered equal if it is using different
texture filtering modes. This was causing problems where rectangles
with different filters would end up batched together and then rendered
with the wrong filter mode.
If your OpenGL driver supports GLX_INTEL_swap_event that means when
glXSwapBuffers is called it returns immediatly and an XEvent is sent when
the actual swap has finished.
Clutter can use the events that notify swap completion as a means to
throttle rendering in the master clock without blocking the CPU and so it
should help improve the performance of CPU bound applications.
Some extensions only support GLX versions > 1.3 and may not support
old style X Windows as GLXDrawables, so we now create GLXWindows for
stages when possible.
Commit d2bdd3cb62 fixed some compiler warnings but also broke the
ability to create a stage. Although not having warnings from the
compiler is nice, it is also nice to be able to create a stage so lets
not invert the meaning of the error check.
The function modifies the pixels pointed by p in-place so the pointer
can not be constant. The compiler was accepting this because the
modification is done from inline assembler.
_cogl_texture_driver_gen is needed to set the texture minification
mode to Cogl's default of GL_LINEAR. There was also a line to set this
in _cogl_texture_2d_new_with_size but it wasn't working because it was
called *before* the texture was bound. If the texture was later
rendered with the default material it then it would end up with GL's
default mipmap filtering mode but without mipmaps so it would render
white squares instead.
This adds a fast path for premultiplying an RGBA image using SSE2
instructions. SSE registers are 128-bit and we need at least 16-bits
per component for the intermediate result of the multiplication so we
can do two pixels in parallel with one register. The function
interleaves 2 SSE registers to multiply 4 pixels in one function call
with the hope that this will pipeline better.
http://bugzilla.openedhand.com/show_bug.cgi?id=1939
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
• Add the function name in the warning, since the text is the same in
both clutter_actor_raise() and clutter_actor_lower().
• If an actor has a name then prefer it to the type name.
OpenGL ES has no PBO extension, so we fallback to using a malloc'ed
buffer. Make sure the OpenGL-only defines don't leak into the OpenGL ES
compilation.
First, let's add a new public feature called, surprisingly,
COGL_FEATURE_PBOS to check the availability of PBOs and provide a
fallback path when running on older GL implementations or on OpenGL ES
In case the underlying OpenGL implementation does not provide PBOs, we
need a fallback path (a malloc'ed buffer). The CoglPixelBufer
constructors will instanciate a subclass of CoglBuffer that handles
map/unmap and set_data() with a malloc'ed buffer.
The public feature is useful to check before using set_data() on a
buffer as it will mean doing a memcpy() when not supporting PBOs (in
that case, it's better to create the texture directly instead of using a
CoglBuffer).
The only goal of using COGL buffers is to use them to create
textures. cogl_texture_new_from_buffer() is the new symbol to create
textures out of buffers.
This subclass of CoglBuffer aims at wrapping PBOs or other system
surfaces like DRM buffer objects. Two constructors are available:
cogl_pixel_buffer_new() with a size when you only care about the size of
the buffer (such a buffer can be used to store several texture data such
as the three planes of a I420 frame).
cogl_pixel_buffer_new_full() is more a 1:1 mapping between the data and
an underlying surface, with the possibility of having access to a low
level memory buffer that may have a stride.
Buffer objects are cool! This abstracts the buffer API first introduced
by GL_ARB_vertex_buffer_object and then extended to other objects.
The coglBuffer abstract class is intended to be the base class of all
the buffer objects, letting the user map() buffers. If the underlying
implementation does not support buffer objects (or only support VBO but
not FBO for instance), fallback paths should be provided.
The only way the user has to set the mipmap filters is through the
material/layer API. This API defaults to GL_LINEAR/GL_LINEAR for the max
and min filters. With the main use case of cogl being 2D interfaces, it
makes sense do default to GL_LINEAR for the min filter.
When creating new textures, we did not set any filter on them, using
OpenGL defaults': GL_NEAREST_MIPMAP_LINEAR for the min filter and
GL_LINEAR for the max filter. This will make the driver allocate memory
for the mipmap tree, memory that will not be used in the nominal case
(as the material API defaults to GL_LINEAR).
This patch tries to ensure that the min filter is set to GL_LINEAR
before any glTexImage*() call is done on the texture by setting the
filter when generating new OpenGL handles.
Some GL functions have a return value that the GE() macro is not able to
handle. Let's define a new Ge_RET() macro which will be able to handle
functions such as glMapBuffer().
While at it, removed the unused variadic dots to the GE() macro.
* animator-parser:
docs: Describe the Animation definition syntax
animator: Provide a ClutterScript parser
animator: Allow retrieving type property type from a key
script: Use a node when resolving an animation mode
The whole point of having the Animator class is that the developer can
describe a complex animation using ClutterScript. Hence, ClutterAnimator
should hook into the Script machinery and parse a specific description
format for its keys.
When asking a key for its target value we also ask the developer to pass
in an initialized GValue - but we don't make it easy to know the type of
the GValue. A developer has to ask the GObject class for the GParamSpec
and then initialize the GValue, instead.
Since we know the type of the GValue we should provide a getter for it.
We should also allow developers to throw at us GValue with compatible and
transformable types.
Finally, all the accessors should be constified.
Instead of taking a string and duplicating the "is it a string or an
integer" check in both Alpha and Animation, the function in
ClutterScript that resolves the animation mode values should take a
JsonNode and do all the checks it needs.
When we trashed the contents of the stencil buffer during
_cogl_path_fill_nodes we marked the clip stack state as dirty and expected
the clip stack code would clean up our glStencilFunc state.
The problem is that we only try and update the clip state during
_cogl_journal_init (when we flush the framebuffer state) which is only
called when the journal first gets something logged in it.
To make sure the stencil state is cleaned up we now also flush the journal
so _cogl_journal_init will be called for the next logged rectangle.
If we aren't syncing to vblank or if the last dispatch didn't cause a
redraw then the master clock will try to wait at least a small amount
of time before dispatching again. However if time goes backwards then
it would not do a dispatch until time catches up again. To fix this it
know just runs a dispatch immediately if time goes backwards.
This is related to Moblin bug #3839. There was a similar fix for this
in 9dc012c07, however that only fixed the case where timelines
wouldn't update. If there are no animations running then the master
clock won't even try updating timelines until time catches up.
http://bugzilla.o-hand.com/show_bug.cgi?id=1974
* origin/cwiiis-stage-resize:
[stage-x11] Set the default size differently
[stage] Set default size correctly
Revert "[x11] Don't set actor size on ConfigureNotify"
[x11] Don't set actor size on ConfigureNotify
[stage] Now that get_geometry works, use it
[stage-x11] make get_geometry always get geometry
[stage] Get the current size correctly
[stage] Set minimum width/height to 1x1
[stage] Add set/get_minumum_size
ClutterAnimator is a class for managing the animation of multiple
properties of multiple actors over time with keyframing of values.
The Animator class is meant to be used to effectively describe
animations using the ClutterScript definition format, and to construct
complex implicit animations from the ground up.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
We want to set the default size without triggering the layout machinary,
so change the window creation process slightly so we start with a
640x480 window.
Due to the way the new sizing works, clutter stage must set its size in
init (to maintain old behaviour) and the properties on the X11 stage
must be initialised to 1x1 so that it actually goes ahead with the
resize.
Fixes stages that aren't user resizable and have no size set from
appearing at 1x1.
Calling clutter_actor_set_size in response to ConfigureNotify makes
setting the size of the stage racy - the most common result of which
seems to be that you can't set the stage dimensions to anything less
than 640x480.
Instead, add a first_allocation bit to the private structure of the X11
stage and force the first resize (necessary or the default stage will be
a 1x1 window).
We want the actual window geometry in clutter_stage_set_minimum_size,
not the set size. Now that the geometry function has been changed to do
what it says, use it.
Now that we have a minimum size getter on the stage object, change
get_geometry to actually always return the geometry. This fixes stages
that are set as user-resizable appearing at 1x1 size.
This will need changing in other back-ends too.
Get the current size of the stage correctly in
clutter_stage_set_minimum_size. The get_geometry StageWindow function is
not equivalent of the current size, use clutter_actor_get_size().
This adds three new texture backends.
- CoglTexture2D: This is a trimmed down version of CoglTexture2DSliced
which only supports a single texture and only works with the
GL_TEXTURE_2D target. The code is a lot simpler so it has a less
overheads than dealing with slices. Cogl will use this wherever
possible.
- CoglSubTexture: This is used to get a CoglHandle to represent a
subregion of another texture. The texture can be used as if it was a
standalone texture but it does not need to copy the resources.
- CoglAtlasTexture: This collects RGB and RGBA textures into a single
GL texture with the aim of reducing texture state changes and
increasing batching. The backend will try to manage the atlas and
may move the textures around to close gaps in the texture. By
default all textures will be placed in the atlas.
There was a typo in getting the height of the full texture to check
whether the sub region fits so that it was using the width
instead. This was causing crashes when debugging is enabled for some
apps.
The reason why we have a dummy, offscreen Window when we create the
GLX context is that GLX does not like it when you ask the context for
features if it's not made current to a Drawable. Maybe in the future
it will allow us to do so, but right now we have to make do with what
GLX offers us.
In cogl_texture_new_from_file we create and own a temporary
bitmap. There's no need to copy this data if we need to do a premult
conversion so instead it just does conversion before passing it on to
cogl_texture_new_from_bitmap.
The Cogl atlas code was using _cogl_texture_prepare_for_upload with a
NULL pointer for the dst_bmp to determine the internal format of the
texture without converting the bitmap. It needs to do this to decide
whether the texture will go in the atlas before wasting time on the
conversion. This use of the function is a little confusing so that
part of it has been split out into a new function called
_cogl_texture_determine_internal_format. The code to decide whether a
premult conversion is needed has also been split out.
Bind ctrl-backspace and ctrl-del to functions that delete a word before
or after the cursor, respectively.
Selection does not affect the deletion, but current selection is
preserved. This mimicks GTK+ functionality in GtkTextView and GtkEntry.
http://bugzilla.openedhand.com/show_bug.cgi?id=1767
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The SDL API is far too limited for the windowing system needs of
Clutter; the status of the SDL backend was always experimental, and
since the Windows platform is supported by a native backend there is
no point in having the SDL backend around any more.
The Win32 backend now implements the create_context method which
creates a context and binds it to a 1x1 invisible window. That way
there will always be a context bound and the features can be retrieved
without creating the default stage. This reflects the changes in
1c6ffc8..b245d55 to the GLX backend.
Instead of using g_critical() inside the create_context() implementation
of the ClutterBackendGLX we should use the passed GError, so that the
error message can bubble up to the caller.
Instead of creating the default stage during initialization we can
now safely create it whenever clutter_stage_get_default() is called.
To maintain the invariant, the default stage is immediately realized
by Clutter itself.
Since we must guarantee that Cogl has a GL context to query, it is too
late to use the "dummy Window" trick from within the get_features()
virtual function implementation.
Instead, we can create a dummy Window from create_context() itself and
leave it around - basically trading a default stage with a dummy X
window.
We need to have the dummy X window around all the time so that the
GLX context can be selected and made current.
High level toolkits might wish to construct a PangoFontDescription and
then set it directly on a ClutterText actor proxy or sub-class.
ClutterText should have a :font-description property to set (and get)
the PangoFontDescription.
http://bugzilla.openedhand.com/show_bug.cgi?id=1960
Commit 92a375ab4 changed the initial value of max_texcoord_attrib_unit
to -1 so that it could disable the texture coord array for the first
texture unit when there are no texture coords used in the vbo. However
max_texcoord_attrib_unit was an unsigned value so this actually became
G_MAXUINT. The disabling loop at the bottom still worked because
G_MAXUINT+1==0 but the check for whether any texture unit is greater
than max_texcoord_attrib_unit was failing so it would always end up
disabling all texture units. This is now fixed by changing
max_texcoord_attrib_unit to be signed.
The commit ecbb7ce41a exposed some issues
when positioning the cursor with the mouse pointer: the selection is
not moved along with the cursor when inserting a single character or a
string.
Also, some freeze_notify() are called too early, leading to decoupling
from their respective thaw_notify().
http://bugzilla.openedhand.com/show_bug.cgi?id=1955
The documentation for ClutterGroup behaviour when setting an explicit
size is not accurate - or, actually, it was accurate by the time
ClutterGroup was first written but has been neglected in the following
release cycles.
To avoid confusion for new users of Clutter the documentation should be
slightly expanded, mentioning the exact semantics of ClutterGroup with
regards to: preferred size, explicitly set size and how to constrain the
visible area of a ClutterGroup to an explicitly set size.
Based on a patch by: Neil Roberts <neil@linux.intel.com>
When we disable the per-actor events delivery Clutter replicates the X11
implicit soft grab for motion events with off-stage. The implicit grab
is done whenever the pointer of a device leaves a window with a button
still pressed; with the implicit grab in place the window still receives
motion events even after the LeaveNotify - until the button is released.
The implicit grab is not honoured in the per-actor event deliver case,
though, so we have a mismatch between two in theory equivalent cases.
Luckily, the fix is pretty trivial: when we check for a motion event
with a stage set but without an actor set, and that has off-stage
coordinates, we arbitrarily set the source to be the stage of the event
and emit the pointer event.
When deciding if a material layer is equal it now compares the GL
target and texture number if the textures are not sliced. This is
needed to get batching across atlased textures.
Cogl accepts a pixel format for both the data in memory and the
internal format to be used for the texture. If they do not match then
it would convert them using the CoglBitmap functions before uploading
the data. However, GL also lets you specify both formats so it makes
more sense to let GL do the conversion. The driver may need the
texture in a specific format so it may end up being converted anyway.
The cogl_texture_upload_data functions have been removed and replaced
with a single function to prepare the bitmap. This will only do the
premultiplication conversion because that is the only part that GL
can't do directly.
The premult part of _cogl_convert_premult has now been split out as
_cogl_convert_premult_status. _cogl_convert_premult has been renamed
to _cogl_convert_format to make it less confusing. The premult
conversion is now done in-place instead of copying the
buffer. Previously it was copying the buffer once for the format
conversion and then copying it again for the premult conversion. The
premult conversion never changes the size of the buffer so it's quite
easy to do in place. We can also use the separated out function
independently.
The internal format of the atlas texture is still set to the
appropriate format so Cogl will disable blending for textures that are
intended to be RGB. This should end up ignoring the alpha channel from
the texture in the atlas. This makes the code slightly easier to
maintain and should also improve the chances of batching.
Since we're allowing allocation cycles saying that calling
queue_relayout() inside an allocation cycle "is not allowed" is kind of
confusing. We should say that "it is not recommended".
* device-manager: (37 commits)
x11: Re-enable XI1 extension keyboards
x11: Always handle core device events before XI events
docs: Documentation fixes for DeviceManager
device-manager: Fix the signals definition
docs: Add sections for InputDevice and DeviceManager
docs: Add clutter_input_device_get_device_name()
tests: Print out the device details on motion
Always register core devices
device: Remove unused is_default member
win32: Experimental implementation of device support
tests: Print the device name, as well as its Id
x11: Fill out the :name property of the InputDevices
device: Add the :name property to InputDevice
x11: Store core devices on the X11 Backend singleton
device: Unset the cursor actor when leaving the stage
device: Add pointer actor getter
x11: Discard the LeaveNotify for off-stage ButtonRelease
device: Do not overwrite the stage for an InputDevice
event: Off-stage button releases have a click count of 1
event: Scroll events do not have click count
...
Added a "selection-bound" notify on clutter_text_clear_selection as it
changes the value.
Added utility function clutter_text_set_positions, in order to
change both cursor position and selection bound inside a
g_object_[freeze/thaw]_notify block
Added g_object_[freeze/thaw]_notify in other functions that changes
both cursor position and selection bound
Solves http://bugzilla.openedhand.com/show_bug.cgi?id=1955
ClutterStage has both set_key_focus() and get_key_focus() methods, but
there is no :key-focus property. This means that it is not possible to
get notifications when the key-focus has changes except by connecting to
both the ::key-focus-in and ::key-focus-out signals and do additional
bookkeeping.
http://bugzilla.openedhand.com/show_bug.cgi?id=1956
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The TimeoutPool is not used by ClutterTimeline any more, so we need to
remove a sentence from its description. We also need to fix the gtk-doc
syntax errors.
Instead of assigning a new colour to each quad of a batch, the
rectangle debugging code now assigns a new colour to each batch so
that it can be used to visually see what is being batched. The colour
is stored in a global variable that is reset during cogl_clear. This
improves the chances that the same colour will be used for a batch in
the next frames to avoid flickering.
When setting up the state for the vertex buffer,
enable_state_for_drawing_buffer tries to keep track of the highest
numbered texture unit in use. It then disables any texture arrays for
units that were previously enabled if they are greater than that
number. However if there is no texturing in the VBO then the max used
unit would be left at 0 which it would later think meant unit 0 is
still in use so it wouldn't disable it. To fix this it now initialises
the max used unit to -1 which it should interpret as ‘no units are in
use’ so it will later disable the arrays for all units.
Thanks to Jon Mayo for reporting the bug.
http://bugzilla.openedhand.com/show_bug.cgi?id=1957
We were checking the number of texture units against the GL enum that is
used in glGetInteger() to query that number. Let's abstract this in a
little function.
Took the opportunity to dig a bit on the usage of GL limits for the
number of texture (image) units and document our use of them. We'll need
something finer grained if we want to fully exploit texture image units
with a programmable pipeline.
The index field of CoglTextureUnit was never set, leading to the
creation of units with index set to 0. When trying to retrieve a texture
unit by its index (!= 0) with _cogl_get_texture_unit(), a new one was
created as it could not find it back in the list of textures units:
ctx->texture_units.
http://bugzilla.openedhand.com/show_bug.cgi?id=1958
The :opacity property is defined using a GParamSpecUchar. This usually
leads to issues with language bindings that don't have an 'unsigned
char' type and that need to explicitly handle the conversion between
G_TYPE_UCHAR and G_TYPE_INT or G_TYPE_UINT.
The property definition already specifies an interval size of [0, 255]
on the values; more importantly, GObject already implicitly transforms
between G_TYPE_UCHAR and G_TYPE_UINT (the GValue transformation
functions are registered at type system initialization time) so
switching between a GParamSpecUchar and a GParamSpecUint should not be
an ABI break.
I have tested a simple program using the opacity property before and
after the change and I cannot see any run-time warnings related to this
issue.
Be more drastic if the internal state is broken, and assert() if the
expected Alpha and Timeline instances we need are not valid. This
usually implies a library bug or a massive heap corruption.
The Animation code does transformation of values between type A and A'
after checking for compatibility using g_value_type_compatible(). This
is incorrect: compatibility means that the two types can be copied. The
correct conversion should follow:
if (compatible (type (A), type (A')))
copy (A, A');
else
if (transformable (type (A), type (A')))
transform (A, A');
else
error("Unable to trasform type A in A'");
The transformation might still fail, so we need to check for errors
there as well as a fall-through case.
We should not just check for compatibility, but also for the ability to
transform a GValue of type A into another of type A'.
Usually compatibility is enough, especially if types can be
introspected beforehand; some times, though, we also need to check for
transformability as a type can provide the transformation functions
necessary for the operation.
The commit 1c69c61745 which improved the
protection against timeline removals during the master clock advancement
was only doing half the job - and actually broke the chaining of
animations inside the ::completed signal.
We cannot simply take a reference on the timelines and still use the list
held by the master clock because the do_tick() might result in the
creation of a new timeline, which gets added at the end of the list with
no reference increase and thus gets disposed at the end of the iteration.
We also cannot steal the master clock timelines list because a timeline
might be removed as the direct result of do_tick() and remove_timeline()
would not find the timeline, failing and leaving a dangling pointer
behind.
For this reason we copy the list of timelines out of the one that the
Master Clock holds, take a reference on each timeline, advance them all,
release the reference and free the list.
The extension keyboard support in XInput 1.x is hopelessly broken.
Nevertheless, it's possible to use some bits of it, as we prefer the
core keyboard events to the XInput events, thus at least having proper
handling for X11 key events on the Stage window.
The XI 1.0 layer is complementary to the X11 core devices handling; this
means that core events will still be emitted for the core pointer and
keyboard devices, and that secondary (floating) devices should be
handled on top of that.
Thus, the XI event handling code should be executed (if explicitly
compiled in and enabled) if the core device events have not been parsed.
Note: this is going away with XI2, which completely replaces both core and
XI1 events.
Even with XInput support we should always register core devices. This
allows us to handle enter and leave events correctly on the Stage and
to have a working XInput 1.x support in Clutter.
Mostly lifted from the core pointer and keyboard X11 backend support.
The win32 backend registers two devices (a core pointer and a core
keyboard) and assigns them to the event structure when doing the
translation from native events to Clutter events.
Thanks to: Samuel Degrande <Samuel.Degrande@lifl.fr> for testing this
patch.
Instead of overloading the device id of 0 and 1 we should treat the core
devices as special, and have a pointer inside the X11 backend singleton
structure, for fast access.
When an InputDevice leaves a stage we set the stage member of
InputDevice to NULL. We should also unset the cursor_actor (as the
device is obviously not on an actor any more).
When the device re-enters the Stage the ENTER/LEAVE event generation
machinery will then be able to emit the ENTER event on the Stage.
If the user presses a button on a pointer device and then moves out the
Stage X11 will emit the following events:
LeaveNotify ➔ MotionNotify ... ➔ ButtonRelease ➔ LeaveNotify
The second LeaveNotify differs from the first by the state field.
Unfortunately, ClutterCrossingEvent doesn't have a modifier_state field
like other events, so we cannot provide a way for programmatically
distinguishing them from a Clutter perspective. This is also an X11-ism
we might not even want to replicate on every backend with sane
enter/leave semantics.
For this reason we should check inside the X11 event processing if the
pointer device has already left the Stage and ignore the second
LeaveNotify.
The Stage field of an InputDevice is set by the backend, whenever the
pointer enters or leaves the Stage. The Stage should not overwrite the
stage field for every event it processes.
The previous state for the device is used by the click count machinery
and we should not be overwriting it at every event; instead, we should
use a parallel storage for the current state coming from the windowing
system.
The device manager does not need to update the state of the devices
when the user has disabled the delivery of motion events to actors:
the events will always be delivered as they are to the stage.
The LEAVE/ENTER event pairs should be queued during the InputDevice
update process, when we change the actor under the device pointer.
This commit cleans up the event emission code inside clutter-main.c
and the logic of the event processing.
The InputDevice objects stores pointer coordinates, state, stage and
the actor under the cursor, so if the current backend provides us with
one attached to the Event structure then we want the InputDevice itself
to update its state and give us the ClutterActor underneath the
pointer's cursor.
Even when we are not using XInput we now have fallback devices; the
X11 backend should always assign the default devices when translating
the X events to Clutter events.
Use the device manager to store the input devices. Also, provide
two fallback devices when initializing the X11 backend: device 0
for the pointer and device 1 for the keyboard.
Previously the atlas textures were being created with whatever format
the first sub texture is in. Only three formats are supported so this
only matters if the first texture is a premultiplied alpha
texture. Instead it now masks out the premultiplied bit so that the
textures are always either RGB_888 or RGBA_8888.
The win32 backend now handles the WM_SETCURSOR message and sets a
fully transparent cursor if the cursor-visible property has been
cleared on the stage. The icon is stored in the library via a resource
file. The instance handle for the DLL is needed to load the resource
so there is now a DllMain function to grab the handle.
g_list_foreach has better protection against the current node being
removed. This will happen for example if someone calls
clutter_container_foreach(container, clutter_actor_destroy). This was
causing valgrind errors for the conformance tests which do just that.
When uploading texture data it was just calling cogl_texture_set_data
on the large texture. This would attempt to convert the data to the
format of the large texture. All of the textures with alpha channels
are stored together regardless of whether they are premultiplied so
this was causing premultiplied textures to be unpremultiplied
again. It now just uploads the data ignoring the premult bit of the
format so that it only gets converted once.
With the atlas texture backend ensuring the mipmaps can make it become
a completely different texture which will have different texture
coordinates or may even be sliced. Therefore we need to ensure the
mipmaps before deciding which quads to log in the journal. This adds a
new private function to cogl-material which ensures the mipmaps if
needed.
The sub texture backend doesn't work well as a completely general
texture backend because for example when rendering with cogl_polygon
it needs to be able to tranform arbitrary texture coordinates without
reference to the other coordintes. This can't be done when the texture
coordinates are a multiple of one because sometimes the coordinate
should represent the left or top edge and sometimes it should
represent the bottom or top edge. For example if the s coordinates are
0 and 1 then 1 represents the right edge but if they are 1 and 2 then
1 represents the left edge.
Instead the sub-textures are now documented not to support coordinates
outside the range [0,1]. The coordinates for the sub-region are now
represented as integers as this helps avoid rounding issues. The
region can no longer be a super-region of the texture as this
simplifies the code quite a lot.
There are two new texture virtual functions:
transform_quad_coords_to_gl - This transforms two pairs of coordinates
representing a quad. It will return FALSE if the coordinates can
not be transformed. The sub texture backend uses this to detect
coordinates that require repeating which causes cogl-primitives
to use manual repeating.
ensure_non_quad_rendering - This is used in cogl_polygon and
cogl_vertex_buffer to inform the texture backend that
transform_quad_to_gl is going to be used. The atlas backend
migrates the texture out of the atlas when it hits this.
When calculating the next integer position for negative coordinates it
would not increment if the position is already a multiple of one so we
need to manually add one.
When try_creating_fbo fails it returns 0 to report the error and if it
succeeds it returns ‘flags’. However cogl_offscreen_new_to_texture
also passes in 0 for the flags as the last fallback to create the fbo
with nothing but the color buffer. In that case it will return 0
regardless of whether it succeeded so the last fallback will always be
considered a failure.
To fix this it now just returns a gboolean to indicate whether it
succeeded and the flags used for each attempt is assigned when passing
the argument rather than from the return value of the function.
Also if the only configuration that succeeded was with flags==0 then
it would always try all combinations because last_working_flags would
also be zero. To avoid this it now uses a separate gboolean to mark
whether we found a successful set of flags.
http://bugzilla.openedhand.com/show_bug.cgi?id=1873
Use the newly-added profiling timers inside the master clock dispatch
function to see how much time we spend:
• in the whole function
• in the event processing for each stage
• in the timeline advancement
Reading back the texture data in unrealize does not seem like a
desirable feature any more, clutter has evolved a lot since it was
implemented.
What's wrong with it now:
* It takes *a lot* of time to read the data back with glReadPixel(),
* When several textures share the same CoglTexture, the same data can
be read back multiple times,
* If the underlying material uses multiple texture units, only the
first one was copied back,
* In ClutterCairoTexture, we end up having two separate copies of the
data,
* GL actually manages texture memory accross system/video memory
for us!
For all the reasons above, let's get rid of the glReadPixel() in
Texture::unrealize()
Fixes: OHB#1842
Since 755cce33a7 the framebuffer code is using the GL enums
GL_DEPTH_ATTACHMENT and GL_DEPTH_COMPONENT16. These aren't available
directly under GLES except with the OES suffix so we need to define
them manually as we do with the other framebuffer constants.
These macros used to define Cogl wrappers for the GLenum values. There are
now Cogl enums everywhere in the API where these were required so we
shouldn't need them anymore. They were in the public headers but as
they are not neccessary and were not in the API docs for Clutter 1.0
it should be safe to remove them.
Using the ::event signal to match the CLUTTER_DELETE event type (and
block the stage destruction) can be costly, since it means checking
every single event.
The ::delete-event signal is similar in spirit to any other specialized
signal handler dealing with events, and retains the same semantics.
If a user supplied multiple groups of texture coordinates with
cogl_rectangle_with_multitexture_coords() then we would repeatedly log only
the first group in the journal. This fixes that bug and adds a conformance
test to verify the fix.
Thanks to Gord Allott for reporting this bug.
The Intel drivers in Mesa 7.6 (and possibly earlier versions) don't
support creating FBOs with a stencil buffer but without a depth
buffer. This reworks framebuffer allocation so that we try a number
of fallback options before failing.
The options we try in order are:
- the same options that were sucessful last time if available
- combined depth and stencil
- separate depth and stencil
- just stencil, no depth
- just depth, no stencil
- neither depth or stencil
Allow the user of the ClutterMedia interface to specify a Pango font
description to display subtitles. Even if the underlying implementation
of the interface does not natively use Pange, it must be capable of
parsing the grammar that pango_font_description_from_string() accepts.
Some source files should not be passed through the introspection parser,
as they are fully private and do not expose any valuable API.
Also the clutter-profile.h header is private and should not be
installed.
We weren't taking a reference on the texture to be used as the color buffer
for offscreen rendering, so it was possible to free the texture leaving the
framebuffer in an inconsistent state.
This adds gives Cogl a dedicated UProf context which will be linked together
with Clutter's context during clutter_init_real().
Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad
You can explicitly ask for a report of Cogl statistics by exporting
COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's
the statisitcs will also be shown in the automatic Clutter reports.
This suspends and resumes all uprof timers and counters except while dealing
with picking, so as to give more focused statistics.
Be aware that there are still some issues with this profile option since
there are a few special case counters and timers that shouldn't be
suspended; noteably the frame counters are incorrect so the per frame stats
can't be trusted.
As we have for debugging, this adds the ability to control profiling flags
either via the command line or an environment variable.
The first option added is CLUTTER_PROFILE=disable-report
This also changes the reporting to be opt-out so you don't need to export
CLUTTER_PROFILE_OUTPUT_REPORT=1 to see a report but you can use
CLUTTER_PROFILE=disable-report to disable it if desired.
UProf is a small library that aims to help applications/libraries provide
domain specific reports about performance. It currently provides high
precision timer primitives (rdtsc on x86) and simple counters, the ability
to link statistics between optional components at runtime and makes report
generation easy.
This adds initial accounting for:
- Total mainloop time
- Painting
- Picking
- Layouting
- Idle time
The timing done by uprof is of wall clock time. It's not based on stochastic
samples we simply sample a counter at the start and end. When dealing with
the complexities of GPU drivers and with various kinds of IO this form of
profiling can be quite enlightening as it will be able to represent where
your application is blocking unlike tools such as sysprof.
To enable uprof accounting you must configure Clutter with --enable-profile
and have uprof-0.2 installed from git://git.moblin.org/uprof
If you want to see a report of statistics when Clutter applications exit you
should export CLUTTER_PROFILE_OUTPUT_REPORT=1 before running them.
Just a final word of caution; this stuff is new and the manual nature of
adding uprof instrumentation means it is prone to some errors when modifying
code. This just means that when you question strange results don't rule out
a mistake in the instrumentation. Obviously though we hope the benfits out
weigh e.g. by focusing on very key stats and by having automatic reporting.
Since asking for ARGB by default is still somewhat experimental on X11
and not every toolkit or complex widgets (like WebKit) still do not like
dealing with ARGB visuals, we should switch back to RGB by default - now
that at least we know it works.
For applications (and toolkit integration libraries) that want to enable
the ClutterStage:use-alpha property there is a new function:
void clutter_x11_set_use_argb_visual (gboolean use_argb);
which needs to be called before clutter_init().
The CLUTTER_DISABLE_ARGB_VISUAL environment variable can still be used
to force this value off at run-time.
Currently, ClutterActor detects a relayout cycle (an actor causing a
relayout to be queued from within an allocate() function) and aborts
after printing out a warning. This might be a little bit too anal
retentive, and it currently breaks GTK+ embedding inside clutter-gtk
so we should probably relax the behaviour a bit. Now we just emit the
warning but we still go ahead with the relayout.
When Clutter tries to pick an ARGB visual it tried to set the
GLX_TRANSPARENT_TYPE attribute of the FBConfig to
GLX_TRANSPARENT_RGB. However the code to do this was broken so that it
was actually trying to set the non-existant attribute number 0x8008
instead. Mesa silently ignored this so it appeared as if it was
working but the Nvidia drivers do not like it.
It appears that the TRANSPARENT_TYPE attribute is not neccessary for
getting an ARGB visual anyway and instead it is intended to support
color-key transparency. Therefore we can just remove it and get all of
the FBConfigs. Then if we need an ARGB visual we can just walk the
list to look for one with depth == 32.
The fbconfig is now stored in a single variable instead of having a
separate variable for the rgb and rgba configs because the old code
only ever retrieved one of them anyway.
Previously when the markup property is set it would generate an
attribute list from the markup and then merge it with the attributes
from the attribute property and store it as the effective
attributes. The markup attributes and the marked up text would then be
forgotten. This breaks if the application then later changes the
attributes property because it would try to regenerate the effective
attributes from the markup text but the stored text no longer contains
any markup. If the original markup text happened to contain entities
like '<' they would end up causing parse errors because they would
be converted to the actual symbols.
To fix this the attributes from the markup are now stored
independently from the effective attributes. The effective attributes
are now regenerated if either set of attributes changes right before a
layout is created.
http://bugzilla.openedhand.com/show_bug.cgi?id=1940
Destroy the dummy XImage we create even on success.
http://bugzilla.openedhand.com/show_bug.cgi?id=1918
Based on a patch by: Carlos Martín Nieto <carlos@cmartin.tk>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
PropertyInfo should store a copy of the JsonNodes it references, so
that property_info_free() can safely dispose them, and we can reference
values across different UI definition data.
The implicit timeline parsing code is not copying the JsonNode; this
leads to a double free in some cases, which is masked by the GSlice
allocator and produces a heap corruption later on.
Allow the user of the ClutterMedia interface to specify an external (as
in not multiplexed with the audio/video streams) location of a subtitle
stream.
Both the ::insert-text and ::delete-text are "action" signals, that is
signals that are safe to (and should) be emitted using g_signal_emit()
directly.
A timeline advancement might cause another timeline to be
destroyed, which will likely lead to a segmentation fault.
Before advancing the timelines we should take a reference
on them - just like we do for the stages before doing
event processing. This will prevent dispose() from running
until the end of the advancement.
http://bugzilla.openedhand.com/show_bug.cgi?id=1854
Apparently, calling g_set_prgname() multiple times is not allowed
anymore, and hence clutter_init_* calls should not do that. Though this
is really GLib's fault - and a massive nuisance for us - we should
prolly comply to avoid the test suite dying on us.
* animate-layout-manager:
layout-manager: Document the animation support
layout-manager: Rewind the timeline in begin_animation()
box-layout: Remove the allocations hash table
docs: Clean up the README file
layout: Let begin_animation() return the Alpha
box-layout: Add knobs for controlling animations
box-layout: Animate layout properties
layout: Add animation support to LayoutManager
Add ActorBox animation methods
Add a section inside the LayoutManager class API reference documenting,
with examples, how to implement animation support inside a layout
manager sub-class.
If the default implementation begin_animation() is called twice then we
should rewind the timeline, as well as updating its duration and the
easing mode of the alpha.
The BoxLayout uses a HashTable to map the latest stable allocation of
each child, in order to use that as the initial value during an
animation; this in spite of already having a perfectly valid per-child
storage as part of the layout manager: ClutterBoxChild.
The last stable allocation should be stored inside the ClutterBoxChild
instead of having it in the private data for ClutterBoxLayout. The
access remains O(1), since there is a 1:1 mapping between child and
BoxChild instances, but we save a little bit of memory and we avoid
keeping aroud allocations for old children.
* stage-use-alpha:
tests: Use accessor methods for :use-alpha
stage: Add accessors for :use-alpha
tests: Allow setting the stage opacity in test-paint-wrapper
stage: Premultiply the stage color
stage: Composite the opacity with the alpha channel
glx: Always request an ARGB visual
stage: Add :use-alpha property
materials: Get the right blend function for alpha
ClutterActor checks, when destroying and reparenting, if the parent
actor implements the Container interface, and automatically calls the
remove() method to perform a clean removal.
Actors implementing Container, though, might have internal children;
that is, children that are not added through the Container API. It is
already possible to iterate through them using the Container API to
avoid breaking invariants - but calling clutter_actor_destroy() on
these children (even from the Container implementation, and thus outside
of Clutter's control) will either lead to leaks or to segmentation
faults.
Clutter needs a way to distinguish a clutter_actor_set_parent() done on
an internal child from one done on a "public" child; for this reason, a
push/pop pair of functions should be available to Actor implementations
to mark the section where they wish to add internal children:
➔ clutter_actor_push_internal ();
...
clutter_actor_set_parent (child1, parent);
clutter_actor_set_parent (child2, parent);
...
➔ clutter_actor_pop_internal ();
The set_parent() call will automatically set the newly added
INTERNAL_CHILD private flag on each child, and both
clutter_actor_destroy() and clutter_actor_unparent() will check for the
flag before deciding whether to call the Container's remove method.
When beginning a new animation for a LayoutManager, the implementation
should return the ClutterAlpha used. This allows controlling the
timeline and/or modifying the animation parameters on the fly.
ClutterLayoutManager does not have any state associated with it, and
defers all the state to its sub-classes.
The BoxLayout is thus in charge of controlling:
• whether or not animations should be used
• the duration of the animation
• the easing mode of the animation
By adding three new properties:
• ClutterBoxLayout:use-animations
• ClutterBoxLayout:easing-duration
• ClutterBoxLayout:easing-mode
And their relative accessors pairs we can make BoxLayout decide whether
or not, and with which parameters, call the begin_animation() method of
ClutterLayoutManager.
The test-box-layout has been modified to reflect this new functionality,
by checking the key-press event for the 'a' key symbol to toggle the use
of animations.
Use the newly added animation support inside LayoutManager to animate
between state changes of the BoxLayout properties.
The implementation is based on equivalent code from Mx, written by:
Thomas Wood <thomas.wood@intel.com>
In order to animate a fluid layout we cannot use the common animation
code paths as they will override the size request and allocation paths
that are handled by the layout manager itself.
One way to introduce animations in the allocation sequence is to use a
Timeline and an Alpha to compute a progress value and then use that
value to interpolate an ActorBox between the initial and final states of
the animation - with the initial state being the last allocation of the
child prior to the animation start, and the final state the allocation
of the child at the end; for every frame of the Timeline we then queue a
relayout on the layout manager's container, which will result in an
animation.
ClutterLayoutManager is the most likely place to add a generic API for
beginning and ending an animation, as well as the place to provide a
default code path to create the ancillary Timeline and Alpha instances
needed to drive the animation.
A LayoutManager sub-class will need to:
• call clutter_layout_manager_begin_animation() whenever it should
animate between two states, for instance: whenever a layout property
changes value;
• eventually override begin_animation() and end_animation() in case
further state needs to be set up, and then chain up to the default
implementation provided by LayoutManager;
• if a completely different implementation is required, the layout
manager sub-class should override begin_animation(), end_animation()
and get_animation_progress().
Inside the allocate() implementation the sub-class should also
interpolate between the last known allocation of a child and the newly
computed allocation.
ClutterActorBox should have an interpolate() method that allows to
compute the intermediate values between two states, given a progress
value, e.g.:
clutter_actor_box_interpolate (start, end, alpha, &result);
Another utility method, useful for layout managers, is a modifier
that clamps the members of the actor box to the nearest integer
value.
When getting signals from higher level toolkits, occasionally
one wants access to the underlying event; say for a Button
widget's "clicked" signal, to get the keyboard state.
Rather than having all of the highlevel widgets emit
ClutterEvent just for the more unusual use cases,
add a global function to access the event state.
http://bugzilla.openedhand.com/show_bug.cgi?id=1888
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Old-style X11 terminals require that even modern X11 send KeyPress
and KeyRelease pairs when auto-repeating. For this reason modern(-ish)
API like XKB has a way to detect auto-repeat and do a single KeyRelease
at the end of a KeyPress sequence.
The newly added check emulates XKB's detectable auto-repeat by peeking
the next event after a KeyRelease and checking if it's a KeyPress for
the same key and timestamp - and then ignoring the KeyRelease if it
matches.
If a Stage has been set to use a foreign Window then Clutter should not
be managing it; calling XWithdrawWindow and XMapWindow should be
reserved to the windows we manage ourselves.
Some actor implementation might avoid imposing any layout on their
children. The Actor base class usually assumes some sort of layout
management is in place, so it will queue relayouts when, for instance,
an actor is shown or is hidden. If the parent of the actor does not
impose any layout, though, showing or hiding one of its children will
not affect the layout of the others.
An example of this kind of container is ClutterGroup.
By adding a new Actor flag, CLUTTER_ACTOR_NO_LAYOUT, and by making
the Group actor set it on itself, the Actor base class can now decide
whether or not to queue a relayout. The flag is not meant to be used
by application code, and should only be set when implementing a new
container.
http://bugzilla.openedhand.com/show_bug.cgi?id=1838
When the texture is in the atlas, ensuring the mipmaps can effectively
make it become a completely different texture so we should do this
before getting the GL handle.
Mipmaps don't work very well in the current atlas because there is not
enough padding between the textures. If ensure_mipmaps is called it
will now create a new texture and migrate the atlased texture to
it. It will use the same blit mechanism as when migrating so it will
try to use an FBO for a fast blit. However if this is not possible it
will end up downloading the data for the entire atlas which is not
ideal.
When reorganizing the textures, we can avoid downloading the entire
texture data if we bind the source texture in a framebuffer object and
copy the destination using glCopyTexSubImage2D. This is also
implemented using a much faster path in Mesa.
Currently it is calling the GL framebuffer API directly but ideally it
would use the Cogl offscreen API. However there is no way to tell Cogl
not to create a stencil renderbuffer which seems like a waste in this
situation.
If FBOs are not available it will fallback to reading back the entire
texture data as before.
This adds a 'dump-atlas-image' debug category. When enabled, CoglAtlas
will use Cairo to create a png which visualizes the leaf rectangles of
the atlas.
This adds an 'atlas' category to the COGL_DEBUG environment
variable. When enabled Cogl will display messages when textures are
added to the atlas and when the atlas is reorganized.
When space can't be found in the atlas for a new texture it will now
try to reorganize the atlas to make space. A new CoglAtlas is created
and all of the textures are readded in decreasing size order. If the
textures still don't fit then the size of the atlas is doubled until
either we find a space or we reach the texture size limits. If we
successfully find an organization that fits then all of the textures
will be migrated to a new texture. This involves copying the texture
data into CPU memory and then uploading it again. Potentially it could
eventually use a PBO or an FBO to transfer the image without going
through the CPU.
The algorithm for laying out the textures works a lot better if the
rectangles are added in order so we might eventually want some API for
creating multiple textures in one go to avoid reorganizing the atlas
as far as possible.
This adds a CoglAtlas type which is a data structure that keeps track
of unused sub rectangles of a larger rectangle. There is a new atlased
texture backend which uses this to put multiple textures into a single
larger texture.
Currently the atlas is always sized 256x256 and the textures are never
moved once they are put in. Eventually it needs to be able to
reorganise the atlas and grow it if necessary. It also needs to
migrate the textures out of the atlas if mipmaps are required.
clutter_actor_get_preferred_width/height currently caches only one size
requests, for a given height / width.
It's common for a layout manager to call get_preferred_width with 2
different heights during the same allocation cycle. Typically once in
the size request, once in the allocation. If
clutter_actor_get_preferred_width is called
alternatively with 2 different for_height, the cache is totally
inefficient, and we end up always querying the actor size even
when the actor does not need a re-allocation.
http://bugzilla.openedhand.com/show_bug.cgi?id=1876
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Fix a copy-and-paste thinko where the cell size was computed using the
minimum size instead of the natural size. For actors with a minimum size
of zero, like Textures, this implied always a zero allocation.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This is an optimised version of CoglTexture2DSliced that always deals
with a single texture and always uses the GL_TEXTURE_2D
target. cogl_texture_new_from_bitmap now tries to use this backend
first. If it can't create a texture with that size then it falls back
the sliced backend.
cogl_texture_upload_data_prepare has been split into two functions
because the sliced backend needs to know the real internal format
before the conversion is performed. Otherwise the converted bitmap
will be wasted if the backend can't support the size.
This provides a way to upload the entire data for a texture without
having to first call glTexImage and then glTexSubImage. This should be
faster especially with indirect rendering where it would needlessy
send the data for the texture twice.
new_from_data and new_from_file can be implemented in terms of
new_from_bitmap so it makes sense to move these to cogl-texture rather
than having to implement them in every texture backend.
This adds a new texture backend which represents a sub texture of a
larger texture. The texture is created with a reference to the full
texture and a set of coordinates describing the region. The backend
simply defers to the full texture for all operations and maps the
coordinates to the other range. You can also use coordinates outside
the range [0,1] to create a repeated version of the full texture.
A new public API function called cogl_texture_new_from_sub_texture is
available to create the sub texture.
The CoglTextureSliceCallback function pointer now takes const pointers
for the texture coordinates. This makes it clearer that the callback
should not modify the array and therefore the backend can use the same
array for both sets of coords.
Given a region of texture coordinates this utility invokes a callback
enough times to cover the region with a subregion that spans the
texture at most once. Eg, if called with tx1 and tx2 as 0.5 and 3.0 it
it would invoke the callback with:
0.5,1.0 1.0,2.0 2.0,3.0
Manual repeating is needed by all texture backends regardless of
whether they can support hardware repeating because when Cogl calls
the foreach_sub_texture_in_region method then it sets the wrap mode to
GL_CLAMP_TO_EDGE and no hardware repeating is possible.
In _cogl_multitexture_quad_single_primitive we use a wrap mode of
GL_CLAMP_TO_EDGE if the texture coordinates are all in the range [0,1]
or GL_REPEAT otherwise. This is to avoid pulling in pixels from either
side when using GL_LINEAR filter mode and rendering the entire
texture. Previously it was checking using the unconverted texture
coordinates. This is ok unless the texture backend is radically
transforming the texture coordinates, such as in the sub texture
backend where the coordinates may map to something completely
different. We now check whether the coordinates are in range after
converting them.
Most of the fields that were previously in CoglTexture are specific to
the implementation of CoglTexture2DSliced so they should be placed
there instead. For example, the 'mipmaps_dirty' flag is an
implementation detail of the ensure_mipmaps function so it doesn't
make sense to force all texture backends to have this function.
Other fields such as width, height, gl_format and format may make
sense for all textures but I've added them as virtual functions
instead. This may make more sense for a sub-texture backend for
example where it can calculate these based on the full texture.
The CoglTexture struct previously contained some fields which are only
used to upload data such as the CoglBitmap and the source GL
format. These are now moved to a separate CoglTextureUploadData struct
which only exists for the duration of one of the cogl_texture_*_new
functions. In cogl-texture there are utility functions which operate
on this new struct rather than on CoglTexture directly.
Some of the fields that were previously stored in the CoglBitmap
struct are now copied to the CoglTexture such as the width, height,
format and internal GL format.
The rowstride was previously stored in CoglTexture and this was
publicly accessible with the cogl_texture_get_rowstride
function. However this doesn't seem to be a useful function because
there is no need to use the same rowstride again when uploading or
downloading new data. Instead cogl_texture_get_rowstride now just
calculates a suitable rowstride from the format and width of the
texture.
Commit 558b17ee1e added support for rectangle textures to the
framebuffer code. Under GLES there is no GL_TEXTURE_RECTANGLE_ARB
definition so this was breaking the build. The rest of Cogl uses
ifdef's around that constant so we should do the same here.
• The debug flags are pre-processor ones, so they should be listed
inside AM_CPPFLAGS.
• Clutter's publicly exported symbols match the following regular
expression:
^(clutter|cogl|json)_*
The old one also listed "pango" as a possible prefix, but the
Pango API is now under the Cogl namespace.
We need to add the row-spacing value when calculating the y position for lines
of actors in horizontal flowing layouts.
Similarly we need to add the col-spacing value when calculating the x posution
for actors in vertical flowing layouts.
When requesting the GLXFBConfig for creating the GLX context, we should
always request one that links to an ARGB visual instead of a plain RGB
one.
By using an ARGB visual we allow the ClutterStage:use-alpha property to
work as intended when running Clutter under a compositing manager.
The default behaviour of requesting an ARGB visual can be disabled by
using the:
CLUTTER_DISABLE_ARGB_VISUAL
Environment variable.
The ClutterStage:use-alpha property is used to let a stage know that it
should honour the alpha component of the ClutterStage:color property.
If :use-alpha is set to FALSE the stage always uses the full opacity
when clearing itself before a paint(); otherwise, the alpha value is
used.
The correct blend function for the alpha channel is:
GL_ONE, GL_ONE_MINUS_SRC_ALPHA
As per bug 1406. This fix was dropped when the switch to premultiplied
alpha was merged.
* text-direction:
docs: Add text-direction accessors
Set the default language on the Pango context
actor: Set text direction on parenting
tests: Display the index inside text-box-layout
box-layout: Honour :text-direction
text: Dirty layout cache on text direction changes
actor: Add :text-direction property
Use the newly added ClutterTextDirection enumeration
Add ClutterTextDirection enumeration
The ClutterLayoutMeta instances should be created on demand, whenever
the layout manager needs them - if the layout manager supports layout
properties.
This removes the requirement to call add_child_meta() and
remove_child_meta() on add and remove respectively; it also simplifies
the implementation of LayoutManager sub-classes since we can add
fallback code in the base abstract class.
Eventually, this will also lead to an easier to implement ClutterScript
parser for layout properties.
With the new scheme, the ClutterLayoutMeta instance is created whenever
the layout manager tries to access it; if there isn't an instance
already attached to the container's child, one is created -- assuming
that the LayoutManager sub-class has overridden the
get_child_meta_type() virtual function and it's returning a valid GType.
We can also provide a default implementation for create_child_meta(),
by getting the GType and instantiating a ClutterLayoutMeta with all the
fields already set. If the layout manager requires more work then it can
obviously override the default implementation (and even chain up to it).
The ClutterBox actor has been updated, as well as the ClutterBoxLayout
layout manager, to take advantage of the changes of LayoutManager.
The colour test for the stage in _clutter_do_pick checks for white to
determine whether the stage was picked but since 47db7af4d we were
setting the colur to black. This usually worked because the id of the
default stage ends up being 0 which equates to black. However if a
second stage is created then it will always end up picking the first
stage.
We currently enable blending if the material colour has
transparency. This patch makes it also enable blending if any of the
lighting colours have transparency. Arguably this isn't neccessary
because we don't expose any API to enable lighting so there is no
bug. However it is currently possible to enable lighting with a direct
call to glEnable and this otherwise works so it is a shame not to have
it.
http://bugzilla.openedhand.com/show_bug.cgi?id=1907
The stage's pick id can be written to the framebuffer when we call
cogl_clear so there's no need for the stage to also chain up in it's pick
function resulting in clutter-actor.c also emitting a rectangle for the
stage.
cogl_push_draw_buffer, cogl_set_draw_buffer and cogl_pop_draw_buffer are now
deprecated and new code should use the new cogl_framebuffer_* API instead.
Code that previously did:
cogl_push_draw_buffer ();
cogl_set_draw_buffer (COGL_OFFSCREEN_BUFFER, buffer);
/* draw */
cogl_pop_draw_buffer ();
should now be re-written as:
cogl_push_framebuffer (buffer);
/* draw */
cogl_pop_framebuffer ();
As can be seen from the example above the rename has been used as an
opportunity to remove the redundant target argument from
cogl_set_draw_buffer; it now only takes one call to redirect to an offscreen
buffer, and finally the term framebuffer may be a bit more familiar to
anyone coming from an OpenGL background.
Instead of storing an enum with the backend type for each texture and
then using a switch statement to decide which function to call, we
should store pointers to all of the functions in a struct and have
each texture point to that struct. This is potentially slightly faster
when there are more backends and it makes implementing new backends
easier because it's more obvious which functions have to be
implemented.
cogl_offscreen_new_to_texture previously bailed out if the given texture's
GL target was anything but GL_TEXTURE_2D, but it now also allows
foreign GL_TEXTURE_RECTANGLE_ARB textures.
Thanks to Owen for reporting this issue, ref:
https://bugzilla.gnome.org/show_bug.cgi?id=601032
cogl_material_copy can be used to create a new CoglHandle referencing a copy
of some given material.
From now on we will advise that developers always aim to use this function
instead of cogl_material_new() when creating a material that is in any way
derived from another.
By using cogl_material_copy, Cogl can maintain an ancestry for each material
and keep track of "similar" materials. The plan is that Cogl will use this
information to minimize the cost of GPU state transitions.
This function was #if 0'd before we released Clutter 1.0 so there's no
implementation of it. At some point we thought it might assist with
developers breaking out into raw OpenGL. Breaking out to raw GL is a
difficult problem though so we decided instead we will wait for a specific
use case to arrise before trying to support it.
Actors, unlike objects, can effectively go away whilst being
animated - usually because of an explicit destoy().
The Animation created by clutter_actor_animate() and friends
should keep a weak reference on the actor and eventually
get rid of the animation itself in case the actor goes away
whilst being animated.
_cogl_material_get_layer expects a CoglMaterial* pointer but it was
being called with a CoglHandle. This doesn't matter because the
CoglHandle is actually just the CoglMaterial* pointer anyway but it
breaks the ability to change the _cogl_material_pointer_from_handle
macro.
• Use the same style for the Cogl API reference as the one used for
the Clutter API reference.
• Fix the introspection annotations for cogl_bitmap_get_size_from_file()
The imported Mesa matrix code has some documentation annotations
that make gtk-doc very angry. Since it's all private anyway we
can safely make gtk-doc ignore the offending stuff.
$(COGL_DRIVER)/cogl-defines.h is generated in the configure script so
it ends up in the build directory. Therefore the build rule for
cogl/cogl-defines.h should depend on the file in $(builddir) not
$(srcdir).
The deprecation notices in gtk-doc should also refer to the
release that added the deprecation, and if the deprecated
symbol has been replaced by something else then the new symbol
should be correctly referenced.
The main COGL header cogl.h is currently created at configure time
because it conditionally includes the driver-dependent defines. This
sometimes leads to a stale cogl.h with old definitions which can
break the build until you clean out the whole tree and start from
scratch.
We can generate a stable cogl-defines.h at build time from the
equivalent driver-dependent header and let cogl.h include that
file instead.
_cogl_feature_check expects the array of function names to be
terminated with a NULL pointer but I forgot to add this. This was
causing crashes depending on what happened to be in memory after the
array.
For VBOs, we don't need to check for the extension if the GL version
is greater than 1.5. Non-power-of-two textures are given in 2.0.
We could also assume shader support in GL 2.0 except that the function
names are different from those in the extension so it wouldn't work
well with the current mechanism.
Previously if you need to depend on a new GL feature you had to:
- Add typedefs for all of the functions in cogl-defines.h.in
- Add function pointers for each of the functions in
cogl-context-driver.h
- Add an initializer for the function pointers in
cogl-context-driver.c
- Add a check for the extension and all of the functions in
cogl_features_init. If the extension is available under multiple
names then you have to duplicate the checks.
This is quite tedious and error prone. This patch moves all of the
features and their functions into a list of macro invocations in
cogl-feature-functions.h. The macros can be redefined to implement all
of the above tasks from the same header.
The features are described in a struct with a pointer to a table of
functions. A new function takes the feature description from this
struct and checks for its availability. The feature can take a list of
extension names with a list of alternate namespaces (such as "EXT" or
"ARB"). It can also detect the feature from a particular version of
GL.
The typedefs are now gone and instead the function pointer in the Cogl
context just directly contains the type.
Some of the functions in the context were previously declared with the
'ARB' extension. This has been removed so that now all the functions
have no suffix. This makes more sense when the extension could
potentially be merged into GL core as well.
There is a new internal Cogl function called _cogl_check_driver_valid
which looks at the value of the GL_VERSION string to determine whether
the driver is supported. Clutter now calls this after the stage is
realized. If it fails then the stage is marked as unrealized and a
warning is shown.
_cogl_features_init now also checks the version number before getting
the function pointers for glBlendFuncSeparate and
glBlendEquationSeparate. It is not safe to just check for the presence
of the functions because some drivers may define the function without
fully implementing the spec.
The GLES version of _cogl_check_driver_valid just always returns TRUE
because there are no version requirements yet.
Eventually the function could also check for mandatory extensions if
there were any.
http://bugzilla.openedhand.com/show_bug.cgi?id=1875
We can not process events for a stage that has been destroyed so we
should make sure that the events for the stage are removed from the
global event queue during dispose.
http://bugzilla.openedhand.com/show_bug.cgi?id=1882
Both ClutterAlpha:mode and ClutterAnimation:mode can be defined using:
• an integer id
• the "nick" field of the AnimationMode GEnumValue
• a custom, tweener-like string
All these methods should be documented.
Like in ClutterAlpha, ClutterAnimation:mode must be overridden when
parsing a Script definition, as we accept both a numeric id and the
string id for easing modes.
When _cogl_add_path_to_stencil_buffer is used to draw a path we don't
need to clear the entire stencil buffer. Instead it can clear just the
bounding box of the path. This adds an extra parameter called
'need_clear' which is only set if the stencil buffer is being used for
clipping.
http://bugzilla.openedhand.com/show_bug.cgi?id=1829
When the text direction changes we should evict the cached layouts
to avoid stale entries in case the direction change produces a layout
with the same size.
Every actor should have a property for retrieving (and setting) the
text direction.
The text direction is used to provide a consisten behaviour in both
left-to-right and right-to-left languages. For instance, ClutterText
should perform key navigation following text direction. Layout
managers should also take into account text direction to derive the
right packing order for their children.
Instead of using PangoDirection directly we should use the
ClutterTextDirection enumeration.
We also need a pair of accessor functions for setting and
getting the default text direction.
This fixes a warning about an uninitialised value. It could also
potentially fix some crashes for example if the enable_flags value
happened to include a bit for enabling a vertex array if no vertex
buffer pointer was set.
While loading a JPEG from disk (with clutter_texture_new_from_file),
I got the following:
<Error>: CGBitmapContextCreate: unsupported parameter combination: 8
integer bits/component; 24 bits/pixel; 3-component colorspace;
kCGImageAlphaNone; 3072 bytes/row.
<Error>: CGContextDrawImage: invalid context
Looking around, I found that CGBitmapContextCreate can't make 24bpp
offscreen pixmaps without an alpha channel...
This fixes the bug, and seems to not break other things...
http://bugzilla.openedhand.com/show_bug.cgi?id=1159
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Apple where nice and changed API between releases. This patch checks the
version of the compilation environment and tries to use the right parameter
type.
http://bugzilla.openedhand.com/show_bug.cgi?id=1866
In the new Clutter world backend stage implementations should be lightweight
objects implementing the ClutterStageWindow interface and not ClutterActor
subclasses.
This patch performs various cut-n-pastes to acheive that for the OSX backend
http://bugzilla.openedhand.com/show_bug.cgi?id=1864
ClutterBehaviour should implement the Scriptable interface
and parse ClutterAlpha when implicitly defined, instead of
having this ad hoc code inside ClutterScriptParser itself.
After all, only ClutterBehaviour supports Alpha defined
implicitly.
The ClutterScriptParser should do most of the heavy-lifting for
parsing a JSON object member defining another JSON object into
a GObject property defined using a GParamSpecObject.
cogl_clip_push, and cogl_clip_push_window_rect which are now deprecated were
used in various places internally so this just switches to using the
replacement functions.
cogl_clip_push() which accepts a rectangle in model space shouldn't have
been defined to take x,y,width,height arguments because this isn't consistant
with other Cogl API dealing with model space rectangles. If you are using a
coordinate system with the origin at the center and the y+ extending up,
then x,y,width,height isn't as natural as (x0,y0)(x1,y1). This API has
now been replace with cogl_clip_push_rectangle()
(As a general note: the Cogl API should only use the x,y,width,height style
when the appropriate coordinate space is defined by Cogl to have a top left
origin. E.g. window coordinates, or potentially texture coordinates)
cogl_clip_push_window_rect() shouldn't have been defined to take float
arguments since we only clip with integral pixel precision. We also
shouldn't have abbreviated "rectangle". This API has been replaced with
cogl_clip_push_window_rectangle()
cogl_clip_ensure() wasn't documented at all in Clutter 1.0 and probably
no one even knew it existed. This API isn't useful, and so it's now
deprecated. If no one complains we may remove the API altogether for
Clutter 1.2.
cogl_clip_stack_save() and cogl_clip_stack_restore() were originally added
to allow us to save/restore the clip when switching to/from offscreen
rendering. Now that offscreen draw buffers are defined to own their clip
state and the state will be automatically saved and restored this API is now
redundant and so deprecated.
For a long time now the GLES driver for Cogl has supported a fallback
scanline rasterizer for filling paths when no stencil buffer is available,
but now that we build the same cogl-primitives code for GL and GLES I
thought it may sometimes be useful for debugging to force Cogl to use the
scanline rasterizer instead of the current stencil buffer approach.
In order to know if a layout property exists and retrieve its
description in form of a GParamSpec, we need a wrapper API inside
ClutterLayoutManager. This allows introspecting a LayoutManager
sub-class and eventually serialize and deserialize it.
The ClutterScript parser needs to be extended to parse child properties
and apply them after an actor has been added to a container. In order to
distinguish child properties from regular GObject properties we can use
the "child::" prefix, e.g.:
{
"type" : "ClutterRectangle",
"id" : "child-01",
"child::has-focus" : true,
...
}
Parsing child properties can be deferred to the ClutterScriptable
interface, just like regular properties.
These files were practically identical, except the gles code had additional
support for filling paths without a stencil buffer. All the driver code has
now been moved into cogl/cogl-primitives.c
All the ClutterColor parsing rules should be coalesced inside
clutter_script_parse_color(): object, array and string notations
are the canonical ways of defining a ClutterColor inside a
ClutterScript definition. Having a single function in charge of
the parsing cleans up the code.
Currently, ClutterScriptParser will construct the object (using the
construct-only and construct parameters), apply the properties from
the ClutterScript definition, and eventuall will add children and
behaviours.
The construction phase should be more compartimentalized: the objects
should be constructed first and eventual children and behaviours
added. Then, once an object is requested or when the parsing process
has terminated, all the properties should be applied.
This change allows us to set up the actors before setting their
non-construct properties.
ClutterScript is currently a mix of parser-related code and
the ClutterScript object. All the parser-related code should
be moved inside a private class, ClutterScriptParser, inheriting
from JsonParser.
Instead of counting on a JsonNode pointer to survive we should take
a copy. This allows keeping unresolved properties across different
ClutterScript passes.
It's useful when initialzing offscreen draw buffers to be able to ask
Cogl to create a texture of a given size and with the default internal
pixel format.
When rendering to an fbo for supporting clutter_texture_new_from_actor we
render to an fbo with the same size as the source actor, but with a viewport
the same size as the stage. We offset the viewport so when we render the
source actor in its normal transformed stage position it lands on the fbo.
Previously we were rounding the transformed position given as a float by
truncating the fraction (just using a C cast) but that resulted in an
incorrect pixel offset when rendering offscreen depending on the source
position.
We now simply + 0.5 before casting (or -0.5 for negative numbers)
For supporting clutter_texture_new_from_actor(): when updating a
ClutterTexture's fbo we previously set up an offset frustum in the
perspective matrix before rendering source actors to an offscreen draw
buffer so as to give a perspective as if it were being drawn at its
original stage location.
Now that Cogl supports offset viewports there is a simpler way...
When we come to render the source actor to our offscreen draw buffer we
now copy the projection matrix from the stage; we create a viewport
that's also the same size as the stage (though larger than the offscreen
draw buffer) and as before we apply the modelview transformations of
the source actors ancestry before painting it.
The only trick we need now is to offset the viewport according to the
transformed (to screen space) allocation of the source actor (something we
required previously too). We negatively offset the stage sized viewport
such that the smaller offscreen draw buffer is positioned to sit underneath
the source actor in stage coordinates.
To help keep clutter_texture_paint maintainable this splits out a big
chunk of standalone code that's responsible for updating the fbo when
clutter_texture_new_from_actor has been used.
When updating the FBO for a source actor (to support
clutter_texture_new_from_actor()) we used to simply set an offscreen draw
buffer to be current, paint the source actor and then explicitly set the
window to be current again. This precluded chaining texture_new_from_actor
though because updating another FBO associated with a source actor would end
up restoring the window as the current buffer instead of the previous
offscreen buffer. Now that we use Cogl's draw buffer stack; chaining
clutter_texture_new_from_actor() should be possible.
Before we call glViewport we need to convert Cogl viewport coordinates
(where the origin is defined to be top left) to OpenGL coordinates
(where the origin is defined to be bottom left)
We weren't considering that offscreen rendering is always upside down
and in this case Cogl coordinates == OpenGL coordinates.
Firstly this now uses the draw buffer height not the viewport height
when we need to perform a y = height - y conversion, since (as the
name suggests) we are dealing with window coordinates not viewport
coordinates.
Secondly this skips any conversion when the current draw buffer is an
offscreen draw buffer since offscreen rendering is always forced to be
upside down and in this case Cogl window coordinates == GL window
coordinates.
This new API takes advantage of the recently imported Mesa code to support
inverse matrix calculation. The matrix code keeps track (via internal
flags) of the transformations a matrix represents so that it can select an
optimized inversion function.
Note: although other aspects of the Cogl matrix API have followed a similar
style to Cairo's matrix API we haven't added a cogl_matrix_invert API
because the inverse of a CoglMatrix is actually cached as part of the
CoglMatrix structure meaning a destructive API like cogl_matrix_invert
doesn't let users take advantage of this caching design.
This adds a COGL_DEBUG=matrices debug option that can be used to trace all
matrix manipulation done using the Cogl API. This can be handy when you
break something in such a way that a trace is still comparable with a
previous working version since you can simply diff a log of the broken
version vs the working version to home in on the bug.
This pulls in code from Mesa to improve our matrix manipulation support. It
includes support for calculating the inverse of matrices based on top of a
matrix categorizing system that allows optimizing certain matrix types.
(the main thing we were after) but also adds some optimisations for
rotations.
Changes compared to the original code from Mesa:
- Coding style is consistent with the rest of Cogl
- Instead of allocating matrix->m and matrix->inv using malloc, our public
CoglMatrix typedef is large enough to directly contain the matrix, its
inverse, a type and a set of flags.
- Instead of having a _math_matrix_analyse which updates the type, flags and
inverse, we have _math_matrix_update_inverse which essentially does the
same thing (internally making use of _math_matrix_update_type_and_flags())
but with additional guards in place to bail out when the inverse matrix is
still valid.
- When initializing a matrix with the identity matrix we don't immediately
initialize the inverse matrix; rather we just set the dirty flag for the
inverse (since it's likely the user won't request the inverse of the
identity matrix)
Because Cogl defines the origin for texture as top left and offscreen draw
buffers can be used to render to textures, we (internally) force all
offscreen rendering to be upside down. (because OpenGL defines the origin
to be bottom left)
By forcing the users scene to be rendered upside down though we also reverse
the winding order of all the drawn triangles which may interfere with the
users use of backface culling. This patch ensures that we reverse the
winding order for a front face (if culling is in use) while rendering
offscreen so we don't conflict with the users back face culling.
The debugging function read_pixels_to_file() and _clutter_do_pick were both
directly calling glReadPixels, but we don't wan't Clutter making direct
OpenGL calls and Cogl provides a suitable alternative. It also means
read_pixels_to_file() doesn't need to manually flip the data read due to
differences in Clutter/Cogl coordinate systems.
Technically this change shouldn't make a difference since we are
calling glReadPixels with GL_RGBA GL_UNSIGNED_BYTE which is a 4
byte format and it should always result in the same value according
to how OpenGL calculates the location of sequential rows.
i.e. k = a/s * ceil(snl/a) where:
a = alignment
s = component size (1)
n = number of components per pixel (4)
l = number of pixels in a row
gives:
k = 4/1 * ceil(4l/4) and k = 1/1 * ceil(4l/1) which are equivalent
I'm changing it because I've seen i915 driver code that bails out of
hardware accelerated paths if the alignment isn't 1, and because
conceptually we have no alignment constraints here so even if the current
value has no effect, when we start reading back other formats it may upset
things.
We were previously calling cogl_flush() after setting up the glPixelStore
state for calling glReadPixels, but flushing the journal could itself
change the glPixelStore state.
Since offscreen rendering is forced to be upside down we don't need to do
any conversion of the users coordinates to go from Cogl window coordinates
to OpenGL window coordinates.
Since we do all offscreen rendering upside down (so that we can have the
origin for texture coordinates be the top left of textures for the cases
where offscreen draw buffers are bound to textures) we don't need to flip
data read back from an offscreen framebuffer before we we return it to the
user.
I was originally expecting the code not to handle offset viewports or
viewports with a different size to the framebuffer, but it turns out the
code worked fine. In the process though I think I made the code slightly
more readable.
cogl_viewport only accepted a viewport width and height, but there are times
when it's also desireable to have a viewport offset so that a scene can be
translated after projection but before hitting the framebuffer.
Because Cogl defines the origin of viewport and window coordinates to be
top-left it always needs to know the size of the current window so that Cogl
window/viewport coordinates can be transformed into OpenGL coordinates.
This also fixes cogl_read_pixels to use the current draw buffer height
instead of the viewport height to determine the OpenGL y coordinate to use
for glReadPixels.
First a few notes about Cogl coordinate systems:
- Cogl defines the window origin, viewport origin and texture coordinates
origin to be top left unlike OpenGL which defines them as bottom left.
- Cogl defines the modelview and projection identity matrices in exactly the
same way as OpenGL.
- I.e. we believe that for 2D centric constructs: windows/framebuffers,
viewports and textures developers are more used to dealing with a top left
origin, but when modeling objects in 3D; an origin at the center with y
going up is quite natural.
The way Cogl handles textures is by uploading data upside down in OpenGL
terms so that bottom left becomes top left. (Note: This also has the
benefit that we don't need to flip the data we get from image decoding
libraries since they typically also consider top left to be the image
origin.)
The viewport and window coords are mostly handled with various y =
height - y tweaks before we pass y coordinates to OpenGL.
Generally speaking though the handling of coordinate spaces in Cogl is a bit
fragile. I guess partly because none of it was design to be, it just
evolved from how Clutter defines its coordinates without much consideration
or testing. I hope to improve this over a number of commits; starting here.
This commit deals with the fact that offscreen draw buffers may be bound to
textures but we don't "upload" the texture data upside down, and so if you
texture from an offscreen draw buffer you need to manually flip the texture
coordinates to get it the right way around. We now force offscreen
rendering to be flipped upside down by tweaking the projection matrix right
before we submit it to OpenGL to scale y by -1. The tweak is entirely
hidden from the user such that if you call cogl_get_projection you will not
see this scale.
We were ignoring the possibility that the current modelview matrix may flip
the incoming rectangle in which case we didn't calculate a valid scissor
rectangle for clipping.
This fixes: http://bugzilla.o-hand.com/show_bug.cgi?id=1809
(Clipping doesn't work within an FBO)
Cogl's support for offscreen rendering was originally written just to support
the clutter_texture_new_from_actor API and due to lack of documentation and
several confusing - non orthogonal - side effects of using the API it wasn't
really possible to use directly.
This commit does a number of things:
- It removes {gl,gles}/cogl-fbo.{c,h} and adds shared cogl-draw-buffer.{c,h}
files instead which should be easier to maintain.
- internally CoglFbo objects are now called CoglDrawBuffers. A
CoglDrawBuffer is an abstract base class that is inherited from to
implement CoglOnscreen and CoglOffscreen draw buffers. CoglOffscreen draw
buffers will initially be used to support the
cogl_offscreen_new_to_texture API, and CoglOnscreen draw buffers will
start to be used internally to represent windows as we aim to migrate some
of Clutter's backend code to Cogl.
- It makes draw buffer objects the owners of the following state:
- viewport
- projection matrix stack
- modelview matrix stack
- clip state
(This means when you switch between draw buffers you will automatically be
switching to their associated viewport, matrix and clip state)
Aside from hopefully making cogl_offscreen_new_to_texture be more useful
short term by having simpler and well defined semantics for
cogl_set_draw_buffer, as mentioned above this is the first step for a couple
of other things:
- Its a step toward moving ownership for windows down from Clutter backends
into Cogl, by (internally at least) introducing the CoglOnscreen draw
buffer. Note: the plan is that cogl_set_draw_buffer will accept on or
offscreen draw buffer handles, and the "target" argument will become
redundant since we will instead query the type of the given draw buffer
handle.
- Because we have a common type for on and offscreen framebuffers we can
provide a unified API for framebuffer management. Things like:
- blitting between buffers
- managing ancillary buffers (e.g. attaching depth and stencil buffers)
- size requisition
- clearing
This ensures that glViewport is called before the first stage paint.
Previously _clutter_stage_maybe_setup_viewport (which is done before we
start painting) was bailing out without calling cogl_setup_viewport because
the CLUTTER_STAGE_IN_RESIZE flag may be set if the stage was resized before
the first paint. (NB: The CLUTTER_STAGE_IN_RESIZE flag isn't removed until
we get an explicit event back from the X server since the window manager may
choose to deny/alter the resize.)
We now special case the first resize - where the viewport hasn't previously
been initialized and use the requested geometry to initialize the
glViewport without waiting for a reply from the server.
Over time the two cogl-fbo.c files have needlessly diverged as bug fixes or
cleanups went into one version but not the other. This tries to bring them
back in line with each other. It should actually be simple enough to move
cogl-fbo.c to be a common file, and simply not build it for GLES 1.1, so
maybe I'll follow up with such a patch soon.
The comment just said: "Some implementation require a clear before drawing
to an fbo. Luckily it is affected by scissor test." and did a scissored
clear, which is clearly a driver bug workaround, but for what driver? The
fact that it was copied into the gles backend (or vica versa is also
suspicious since it seems unlikely that the workaround is necessary for both
backends.)
We can easily restore the workaround with a better comment if this problem
really still exists on current drivers, but for now I'd rather minimize
hand-wavey workaround code that can't be tested.
Just like CLUTTER_CHECK_VERSION does version checking at compile
time, we need a way to verify the version of the library that we
are linking against. This is mostly needed for language bindings
and for run-time loadable modules -- when we'll get those.
Otherwise you can't use the alpha channel of the vertex colors unless
the material has a texture with alpha or the material's color has
alpha less than 255.
Apparently, on 64bit systems the floating point noise is enough
to screw up the float-to-int truncation.
The solution is to round up by 0.5 and then use floorf(). This
gives predictable and correct results on both 32bit and 64bit
systems.
When calling remove_child_meta() we check if there is a LayoutMeta
already attached to the Actor, and if that LayoutMeta matches the
(manager, container, actor) tuple. If the LayoutMeta does not match,
though, we create a new LayoutMeta instance -- in order to remove it
right afterwards.
Instead of doing this, we can simply check for a matching LayoutMeta
and if present, remove it.
In case of an existing, non-matching LayoutMeta, we're left with a
dangling instance, but it does not matter: the removal happens in the
unparenting phase of a ClutterContainer, so either the Actor will be
destroyed and thus the LayoutMeta will be disposed along with it; or
it will be parented to another container, and thus the LayoutMeta
will be replaced.
A ClutterBox might not have a ClutterLayoutManager instance
associated -- for instance, during destruction. We should check
for one before calling methods on it.
When cogl_texture_new_from_data() fails in clutter_texture_set_from_data()
and no GError is provided, the clutter app will segfault when dereferencing
the GError ** and emitting LOAD_FINISHED signal.
Based on a patch by: Haakon Sporsheim <haakon.sporsheim@gmail.com>
http://bugzilla.openedhand.com/show_bug.cgi?id=1806
Some changes to make COGL pass distcheck with Automake 1.11 and
anal-retentiveness turned up to 11.
The "major" change is the flattening of the winsys/ part of COGL,
which is built directly inside libclutter-cogl.la instead of an
intermediate libclutter-cogl-winsys.la object.
Ideally, the whole COGL should be flattened out using a
quasi-non-recursive Automake layout; unfortunately, the driver/
sub-section ships with identical targets and Automake cannot
distinguish GL and GLES objects.
If an actor calls directly or indirectly clutter_actor_queue_relayout()
on itself from within the allocate() implementation it will cause a
relayout cycle. This is usually a condition that should be checked by
ClutterActor and we should emit a warning if it is verified.
ClutterActor should check whether the current instance is being
destroyed and avoid performing operations like:
• queueing redraws
• queueing relayouts
It should also warn if the actor is being parented to an actor
currently being destroyed.
When showing a warning in the state checks we perform to verify that
the invariants are maintained when showing, mapping and realizing, we
should also print out the name of the actor failing the checks. If the
actor has no name, the GType name should be used as a fallback.
When defining an Alpha in ClutterScript we should allow setting
the alpha function by using a custom property. This makes it
possible to have both:
{
"id" : "behaviour-1",
"type" : "ClutterBehaviourDepth",
"alpha" : { "timeline" : "timeline-1", "function" : "alpha_func" },
...
}
And:
{
"id" : "alpha-1",
"type" : "ClutterAlpha",
"timeline" : "timeline-1",
"function" : "alpha_func"
},
{
"id" : "behaviour-1",
"type" : "ClutterBehaviourDepth",
"alpha" : "alpha-1",
...
}
The latter allows defining a single alpha function for multiple
behaviours.
The block that allows setting a GObject property holding an object
instance is conditionally depending on the USE_PIXBUF define. This
makes it impossible to reference an object inside ClutterScript on
platforms not using GdkPixbuf.
When an actor is hidden, the parent actor is not required to
size request or allocate it. (ClutterGroup does, but, for example,
NbtkBoxLayout doesn't.) This means that the
needs_width_request/needs_height_request/needs_allocate can be
stale when we go to show it again - they are set for the actor
but not the parent. Explicitly setting them to FALSE avoids
clutter_actor_relayout() improperly short-circuiting.
http://bugzilla.openedhand.com/show_bug.cgi?id=1831
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The change in commit 3bbc96e17e moved the
:text property setter to use set_text_internal(); this function does not
invalidate the Layout cache and does not queue a relayout, thus breaking
the behaviour of ClutterText when setting the contents of the actor using
the property.
http://bugzilla.openedhand.com/show_bug.cgi?id=1851
Since we no longer depend on the GL matrix API in Cogl we can remove a lot
of wrapper code from the GLES 2 backend. This is particularly nice given
that there was no code shared between the cogl-matrix-stack API and gles2
wrappers so we had a lot of duplicated logic.
The indirection through this API isn't necessary since we no longer
arbitrate between the OpenGL matrix API and Cogl's client side API. Also it
doesn't help to maintain an OpenGL style matrix mode API for internal use
since it's awkward to keep restoring the MODELVIEW mode and easy enough to
directly work with the matrix stacks of interest.
This replaces use of the _cogl_current_matrix API with direct use of the
_cogl_matrix_stack API. All the unused cogl_current_matrix API is removed
and the matrix utility code left in cogl-current-matrix.c was moved to
cogl.c.
This cache of the gl matrix mode lets us avoid repeat calls to glMatrixMode
in _cogl_matrix_stack_flush_to_gl when we have lots of sequential modelview
matrix modifications.
This goes a bit further than the previous patch, and as a special case
we now simply represent identity matrices using a boolean, and only
lazily initialize them when they need to be modified.
The journal always uses an identity matrix since it uses software
transformation. Currently it manually uses glLoadMatrix since previous
experimentation showed that the cogl-matrix-stack gave bad performance, but
it would be nice to fix performance so we only have to care about one path
for loading matrices.
For the common case where we do:
cogl_matrix_stack_push()
cogl_matrix_stack_load_identity()
we were effectively initializing the matrix 3 times. Once due to use of
g_slice_new0, then we had a cogl_matrix_init_identity in
_cogl_matrix_state_new for good measure, and then finally in
cogl_matrix_stack_load_identity we did another cogl_matrix_init_identity.
We don't use g_slice_new0 anymore, _cogl_matrix_state_new is documented as
not initializing the matrix (instead _cogl_matrix_stack_top_mutable now
takes a boolean to choose if new stack entries should be initialised) and so
we now only initialize once in cogl_matrix_stack_load_identity.
This relates back to an earlier commitment to stop using the OpenGL matrix
API which is considered deprecated. (ref 54159f5a1d)
The new texture matrix stacks are hung from a list of (internal only)
CoglTextureUnit structures which the CoglMaterial code internally references
via _cogl_get_texure_unit ().
So we would be left with only the cogl-matrix-stack code being responsible
for glMatrixMode, glLoadMatrix and glLoadIdentity this commit updates the
journal code so it now uses the matrix-stack API instead of GL directly.
• Fix list_stages() and peek_stages() documentation
• Fix clutter_text_set_preedit_string() arguments in the header
to match source and documentation
• Add clutter_units_cm() to the private section for Units
• Rename the LayoutManager section
• Add FlowLayout:homogeneous accessors
* layout-manager: (50 commits)
docs: Reword a link
layout, docs: Add more documentation to LayoutManager
layout, docs: Fix description of Bin properties
layout, bin: Use ceilf() instead of casting to int
layout, docs: Add long description for FlowLayout
layout, box: Clean up
layout, box: Write long description for Box
layout, docs: Remove unused functions
layout: Document BoxLayout
layout: Add BoxLayout, a single line layout manager
layout: Report the correct size of FlowLayout
layout: Resizing the stage resizes the FlowLayout box
layout: Use the get_request_mode() getter in BinLayout
layout: Change the request-mode along with the orientation
actor: Add set_request_mode() method
[layout] Remove FlowLayout:wrap
[layout] Rename BinLayout and FlowLayout interactive tests
[layout] Skip invisible children in FlowLayout
[layout] Clean up and document FlowLayout
[layout] Snap children of FlowLayout to column/row
...
The layout manager reference should have some documentation on how
to use a LayoutManager object inside a container and how to implement
a LayoutManager sub-class correctly.
The JSON conditional rules can be moved outside the introspection
conditional ones to avoid a nested check, as all the JSON rules do
is setting up variables that may or may not be used.
The Journal can be considered a standalone component, so even though
it's currently only used to log quads, it seems better to split it
out into its own file.
When we implement atlas textures we will probably want to use the spans API
to handle texture repeating so it doesn't make sense to leave the code in
cogl-texture-2d-sliced.c. Since it's a standalone set of data structures
and algorithms it also seems reasonable to split out from cogl-texture.
cogl-texture-2d-sliced provides an implementation of CoglTexture and this
seperation lays the foundation for potentially supporting atlas textures,
pixmap textures (as in GLX_EXT_texture_from_pixmap) and fast-path
GL_TEXTURE_{1D,2D,3D,RECTANGLE} textures in a maintainable fashion.
cogl-primitives.c was previously digging right into CoglTextures so it could
manually iterate the texture slices for texturing quads and polygons and
because we were missing some state getters we were lazily just poking into
the structures directly.
This adds some extra state getter functions, and adds a higher level
_cogl_texture_foreach_slice () API that hopefully simplifies the way in
which sliced textures may be used to render primitives. This lets you
specify a rectangle in "virtual" texture coords and it will call a given
callback for each slice that intersects that rectangle giving the virtual
coords of the current slice and corresponding "real" texture coordinates for
the underlying gl texture.
At the same time a noteable bug in how we previously iterated sliced
textures was fixed, whereby we weren't correctly handling inverted texture
coordinates. E.g. with the previous code if you supplied texture coords of
tx1=100,ty1=0,tx2=0,ty2=100 (inverted along y axis) that would result in a
back-facing quad, which could be discarded if using back-face culling.
The descriptions for gl_handle and gl_target were inverted.
Thanks to Young-Ho Cha for spotting that.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
As part of an incremental process to have Cogl be a standalone project we
want to re-consider how we organise the Cogl source code.
Currently this is the structure I'm aiming for:
cogl/
cogl/
<put common source here>
winsys/
cogl-glx.c
cogl-wgl.c
driver/
gl/
gles/
os/ ?
utils/
cogl-fixed
cogl-matrix-stack?
cogl-journal?
cogl-primitives?
pango/
The new winsys component is a starting point for migrating window system
code (i.e. x11,glx,wgl,osx,egl etc) from Clutter to Cogl.
The utils/ and pango/ directories aren't added by this commit, but they are
noted because I plan to add them soon.
Overview of the planned structure:
* The winsys/ API is the API that binds OpenGL to a specific window system,
be that X11 or win32 etc. Example are glx, wgl and egl. Much of the logic
under clutter/{glx,osx,win32 etc} should migrate here.
* Note there is also the idea of a winsys-base that may represent a window
system for which there are multiple winsys APIs. An example of this is
x11, since glx and egl may both be used with x11. (currently only Clutter
has the idea of a winsys-base)
* The driver/ represents a specific varient of OpenGL. Currently we have "gl"
representing OpenGL 1.4-2.1 (mostly fixed function) and "gles" representing
GLES 1.1 (fixed funciton) and 2.0 (fully shader based)
* Everything under cogl/ should fundamentally be supporting access to the
GPU. Essentially Cogl's most basic requirement is to provide a nice GPU
Graphics API and drawing a line between this and the utility functionality
we add to support Clutter should help keep this lean and maintainable.
* Code under utils/ as suggested builds on cogl/ adding more convenient
APIs or mechanism to optimize special cases. Broadly speaking you can
compare cogl/ to OpenGL and utils/ to GLU.
* clutter/pango will be moved to clutter/cogl/pango
How some of the internal configure.ac/pkg-config terminology has changed:
backendextra -> CLUTTER_WINSYS_BASE # e.g. "x11"
backendextralib -> CLUTTER_WINSYS_BASE_LIB # e.g. "x11/libclutter-x11.la"
clutterbackend -> {CLUTTER,COGL}_WINSYS # e.g. "glx"
CLUTTER_FLAVOUR -> {CLUTTER,COGL}_WINSYS
clutterbackendlib -> CLUTTER_WINSYS_LIB
CLUTTER_COGL -> COGL_DRIVER # e.g. "gl"
Note: The CLUTTER_FLAVOUR and CLUTTER_COGL defines are kept for apps
As the first thing to take advantage of the new winsys component in Cogl;
cogl_get_proc_address() has been moved from cogl/{gl,gles}/cogl.c into
cogl/common/cogl.c and this common implementation first trys
_cogl_winsys_get_proc_address() but if that fails then it falls back to
gmodule.
This moves most of cogl-context.{c.h} to cogl/common with some driver
specific members now living in a CoglContextDriver struct. Driver specific
context initialization and typedefs now live in
cogl/{gl,gles}/cogl-context-driver.{c,h}
Driver specific members can be found under ctx->drv.stuff
This splits the limited components that differed between
cogl/{gl,gles}/cogl-texture.c into new {gl,gles}/cogl-texture-driver.c files
and the rest that can now be shared into cogl/common/cogl-texture.c
Most of clutter_stage_egl_realize was renamed to
_clutter_stage_egl_try_realize which now takes a cookie indicating which
fallback number should tried next. clutter_stage_egl_realize now keeps
trying to realize with successive fallback numbers until it succeeds or runs
out of fallbacks.
The only fallback supported for now is for hardware with no stencil buffer
support.
This replaces calls to the old (glx 1.2) functions glXChooseVisual,
glXCreateContext, glXMakeCurrent with the 1.3+ fbconfig varients
glXChooseFBConfig, glXCreateNewContext, glXMakeContextCurrent.
The only backend that tried to implement offscreen stages was the GLX backend
and even this has apparently be broken for some time without anyone noticing.
The property still remains and since the property already clearly states that
it may not work I don't expect anyone to notice.
This simplifies quite a bit of the GLX code which is very desireable from the
POV that we want to start migrating window system code down to Cogl and the
simpler the code is the more straight forward this work will be.
In the future when Cogl has a nicely designed API for framebuffer objects then
re-implementing offscreen stages cleanly for *all* backends should be quite
straightforward.
for the marshal files $(srcdir) was getting prefixed twice since my last
commit (2cc88f1140) since it was already being prefixed including
Makefile.am. The problem with prefixing it in the includer file though is
that the Make variable substitutions like :.list=.h mean we end up
generating into the $(srcdir). This removes the prefix added in
clutter/Makefile.am
We were also missing a $(srcdir) prefix when setting EXTRA_DIST
When validating a new GValue against the ClutterParamSpecUnits, we issue
a warning when the units do not match with both the new value and the
unit we expect to have. Unfortunately we were printing the unit of the
new value twice and not the unit of the ParamSpec.
http://bugzilla.openedhand.com/show_bug.cgi?id=1846
This is really useful when trying to animate GTypes that haven't
registered any progress function. Instead of silently not working it
will warn the developer.
http://bugzilla.openedhand.com/show_bug.cgi?id=1845
To be able to animate CLUTTER_TYPE_UNITS properties we need to register
the GType and its progress function against the ClutterInterval code.
The two ClutterUnits defining the interval can use different units, the
resulting unit will always be in pixels, so calculating a progress
between 10px and 4cm is valid.
http://bugzilla.openedhand.com/show_bug.cgi?id=1844
When computing the pixels value of a ClutterUnits value we should
be caching the value to avoid recomputing for every call of
clutter_units_to_pixels(). We already have a flag telling us to
return the cached value, but we miss the mechanism to evict the
cache whenever the Backend settings affecting the conversion, that
is default font and resolution, change.
In order to implement the eviction we can use a "serial"; the
Backend will have an internal serial field which we retrieve and
put inside the ClutterUnits structure (we split one of the two
64 bit padding fields into two 32 bit fields to maintain ABI); every
time we call clutter_units_to_pixels() we compare the units serial
with that of the Backend; if they match and pixels_set is set to
TRUE then we just return the stored pixels value. If the serials
do not match then we unset the pixels_set flag and recompute the
pixels value.
We can verify this by adding a simple test unit checking that
by changing the resolution of ClutterBackend we get different
pixel values for 1 em.
http://bugzilla.openedhand.com/show_bug.cgi?id=1843
Input Methods require to be able to set a "pre-edit string", that is
a string that it's just displayed into the Text actor without being
committed to the actor's buffer. The string might require custom Pango
attributes, and an update of the cursor position.
Casting a float to int to truncate it before assigning the value
to a float again is wrong. We should use ceilf() instead which
does what we want to achieve (rounding up the size to avoid
sub-pixel positioning of children).
* Use g_list_foreach() instead of iterating over the list inside
the destruction sequence, since we are causing the widgets to be
implicitly removed from the list via the destroy() call.
* Use g_signal_connect_swapped() and spare us from a callback.
FlowLayout should compute the correct height for the assigned width when
in horizontal flow, and the correct width for the assigned height when
in vertical flow. This means pre-computing the number of lines inside
the get_preferred_width() and get_preferred_height(). We can then cache
the computed column width and row height, cache them inside the layout
and then use them when allocating the children.
When changing the orientation of a FlowLayout, the associated
container should also change its request mode. A horizontally
flowing layout has a height depending on the width, since it
will reflow vertically; similarly, a vertically reflowing layout
will have a width depending on the height.
The :wrap property is not implemented, and mostly useless: the
FlowLayout is a reflowing grid. This means that if it receives
less than the preferred width or height in the flow direction
then it should always reflow.
Use the column and row size to align each child; with :homogeneous
set to TRUE, or with children with the same size, the FlowLayout
will behave like a reflowing grid.
FlowLayout is a layout manager that arranges its children in a
reflowing line; the orientation controls the major axis for the
layout: horizontal, for reflow on the Y axis, and vertical, for
reflow on the X axis.
The BinLayout should store a pointer to the Container that it is
using it as the layout manager.
This allows us to fix the API and drop the additional Container
arguments from set_alignment() and get_alignment().
This also allows us to add a ClutterBinLayout::add() method which
adds an actor and sets the alignment policies without dealing with
variadic arguments functions and GValue (de)marshalling.
Use the LayoutManager API to set a back pointer to the Box actor
inside the LayoutManager used by the box.
This also allows us to replace the LayoutManager on a Box, since
the LayoutManager will be able to replace all the metadata if
needed.
The LayoutManager implementation might opt to take a back pointer
to the Container that is using the layout instance; this allows
direct access to the container itself from within the implementation.
The ClutterBox::add method is a simple wrapper around the Container
add_actor() method and the LayoutManager layout properties API. It
allows adding an actor to a Box and setting the layout properties in
one call.
If the LayoutManager used by the Box does not support layout properties
then the add() method short-circuits out.
Along with the varargs version of the method there's also a vector-based
variant, for language bindings to use.
Instead of overloading ClutterChildMeta with both container and layout
metadata and delegate to every LayoutManager implementation to keep a
backpointer to the layout manager instance, we can simply subclass
ChildMeta into LayoutMeta and presto! everything works out pretty well
for everyone.
Each actor managed by a BinLayout policy should reside inside its
own "layer", with horizontal and vertical alignment. The :x-align
and :y-align properties of the BinLayout are the default alignment
policies, which are copied to each new "layer" when it is created.
The set_alignment() and get_alignment() methods of BinLayout can
be changed to operate on a specific "layer".
The whole machinery uses the new ChildMeta support inside the
LayoutManager base abstract class.
The ChildMeta object is a storage for child-container properties,
that is properties that exist only when an actor is inside a specific
container. The LayoutManager delegate class should also have
layout-specific properties -- so, for this job, we can "recycle"
ChildMeta as the storage.
Emit the ::layout-changed when the BinLayout alignment policies change.
This will result in a queue_relayout() on the containers using the
BinLayout layout manager.
* Use ::layout-changed to queue a relayout when the layout changes
* Destroy the Box children when destroying the Box
* Allow getting the layout manager from the Box
If a sub-class of LayoutManager wishes to implement a parametrized
layout policy it also needs a way to notify the container using the
layout manager that the layout has changed. We cannot do it directly
and automatically from the LayoutManager because a) it has no back
link to the actor that it is using it and b) it can be attached to
multiple actors.
This is a job for <cue raising dramatic music> signals!
By adding ClutterLayoutManager::layout-changed (and its relative
emitted function) we can notify actors using the layout manager that
the layout parameters have been changed, and thus they should queue
a relayout.
A BinLayout is a simple layout manager that allocates a single cell,
providing alignment on both the horizontal and vertical axis.
If the container associated to the BinLayout has more than one child,
the preferred size returned by the layout manager will be as big as
the maximum of the children preferred sizes; the allocation will be
applied to all children - but it will still depend on each child
preferred size and the BinLayout horizontal and vertical alignment
properties.
The supported alignment properties are:
* center: align the child by centering it
* start: align the child at the top or left border of the layout
* end: align the child at the bottom or right border of the layout
* fill: expand the child to fill the size of the layout
* fixed: let the child position itself
A layout manager instance makes only sense if it's owned by a
container. For this reason, it should have a floating reference
instead of a full reference on construction; this allows constructing
Boxes like:
box = clutter_box_new (clutter_fixed_layout_new ());
without leaking the layout manager instance.
The LayoutManager class is an abstract proxy for the size requesition
and size allocation process in ClutterActor.
A ClutterLayoutManager sub-class must implement get_preferred_width(),
get_preferred_height() and allocate(); a ClutterContainer using the
LayoutManager API will then proxy the corresponding Actor virtual
functions to the LayoutManager instance. This allows having a generic
"blank" ClutterActor sub-class, implementing the ClutterContainer
interface, which leaves only the layout management implementation to
the application developers.
The rules to create signal marshallers and enumeration GTypes are
usually copied and pasted all over different projects, though they
are pretty generic and, given a little bit of parametrization, can
be put in separate Makefile.am files and included whenever needed.
The set_default_stage() method of StageManager should not be used
by application code; technically, nothing in Clutter uses it, and
StageManager's API is not considered public anyway.
The IN_DESTRUCTION flag is set around the unrealization and disposal of
the actor in clutter_actor_destroy() but is never unset (it's set twice
instead).
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Currently, setting the :text property has the side-effect of
setting the :use-markup property to FALSE. This prevents
constructing a Text actor, or setting its properties, like:
g_object_set (text,
"use-markup", TRUE,
"text", some_string,
NULL);
as the ordering becomes important. Unfortunately, the ordering
of the properties cannot be enforced with ClutterScript or
with language bindings.
The documentation of the clutter_text_set_text() method should
be expanded to properly specify that the set_text() method will
change the :use-markup property to FALSE as a side effect.
Transform functions allow the use of g_value_transform() to cast
GValues. It's very handy to have casts to and from G_TYPE_STRING as it
allows generic serialization and parsing of GTypes.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Current parsing of units has a number of shortcomings:
* a number followed by trailing space (without any unit specified) was
not recognized,
* "5 emeralds" was parsed as 5em,
* the way we parse the digits after the separator makes us lose
precision for no good reason (5.0 is parsed as 5.00010014...f which
makes g_assert_cmpfloat() fail)
Let's define a stricter grammar we can recognize and try to do so. The
description is in EBNF form, removing the optional <> which is a pain
when having to write DocBook, and using '' for the terminal symbols.
Last step, add more ClutterUnits unit test to get a better coverage of
the grammar we want to parse.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Parse #rgb and #rrggbb in addition to forms with the alpha channel
specified. This allows conversion of colour strings from documents such as
CSS where the alpha channel is not specified when using '#' notation.
This patch also adds the relevant conformance test.
Parse #rgb and #rrggbb in addition to forms with the alpha channel
specified. This allows conversion of colour strings from documents such as
CSS where the alpha channel is not specified when using '#' notation.
gdk is an optional clutter dependency, so the pick buffer debugging option
needs some guards so we don't break, for example, the OSX builds. This also
adds a comment for the bit fiddling done on the pick colors used to ensure
the pick colors are more distinguished while debugging. (we swap the
nibbles of each color component so that pick buffers don't just look black.)
ClutterGroup previously calculated the size as the distance from the
left edge of the leftmost child to the right edge of the rightmost
child except if there were any chidren left of the origin then the
left edge would be zero.
However the group is always allocated its size relative to its
origin so if all of the children are to the right of the origin then
the preferred size would not be large enough to reach the rightmost
child.
origin
┼──────────┐
│Group │
│ ┌────────┼─┐
│ │Child │ │
│ │ │ │
└─┼────────┘ │
│ │
└──────────┘
group size
╟──────────╢
This patch makes it so the size is always just the rightmost edge.
origin
┼────────────┐
│Group │
│ ┌──────────┤
│ │Child │
│ │ │
│ │ │
│ │ │
└─┴──────────┘
group size
╟────────────╢
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1825
Since the Great Rework of ClutterUnits, functions have been using
'units' not 'unit' in their name. clutter_value_get_unit() is a left
over from a dark age, its declaration and documentation have been
updated but not the symbol itself.
Instead of having an assertion failure with a message of dubious
usefulness, we should probably use a more verbose warning explaining
what is the problem and what might be the cause.
The user-initiated resize is conflicting with the allocated size. This
happens because we change the size of the stage's X Window behind the
back of the size allocation machinery.
Instead, we should change the size of the actor whenever we receive a
ConfigureNotify event to reflect the new size of the actor.
We force the redraw before mapping, in the hope that when a composited
window manager maps the window it will have its contents ready; that is
not going to work: the solution for this problem requires the implementation
of a protocol for compositors, and not a hack.
Moreover, painting before mapping will cause a paint with the wrong
GL viewport size, which is the wrong thing to do on GLX.
When not building a debug build the compiler was warning about empty
else clauses with no braces due to code like:
if (blah)
do_foo();
else
COGL_NOTE (DRAW, "a-wibble");
This simply ensures that even for non debug builds COGL_NOTE will expand to
a single statement.
glVertexPointer expects positions with 2, 3 or 4 components, glColorPointer
expects colors with 3 or 4 components and glNormalPointer expects normals
with three components so when adding vertex buffer atributes with the names
"gl_Vertex", "gl_Color" or "gl_Normal" we assert these constraints and print
an explanation to the developer if not met.
This also fixes the previosly incorrect constraint that gl_Normal attributes
must have n_components == 1; thanks to Cat Sidhe for reporting this:
Bug: http://bugzilla.openedhand.com/show_bug.cgi?id=1819
Now if you export CLUTTER_DEBUG=dump-pick-buffers clutter will write out a
png, e.g. pick-buffer-00000.png, each time _clutter_to_pick() is called.
It's a rather crude way to debug the picking (realtime visualization in a
second stage would probably be nicer) but it we've used this approach
successfully numerous times when debugging Clutter picking issues so it
makes sense to have a debug option for it.
It looks like the intention was to duplicate an XVisualInfo in such a way
that the pointer could be returned and then later freed using XFree. But
Xalloc isn't an Xlib counterpart to XFree; Xlib doesn't provide a general
purpose malloc wrapper afik. By shuffling things about a bit, it was
possible to avoid the need for this hack.
By default, float * is considered as an out argument by gobject
introspection which is wrong for quite a few Cogl symbols. Start adding
annotations to fix that for the ones in the "Primitives" gtk-doc
section.
In the default implementation of container::destroy_child_meta Set child
meta qdata to NULL on the child and not the container, since the child
is the object that owns the data.
The lifetime of the journal VBO is entirely within the scope of the
cogl_journal_flush function so there is no need to store it globally
in the Cogl context. Instead, upload_vertices_to_vbo just returns the
new VBO. cogl_journal_flush stores this in a local variable and
destroys it before returning.
This also fixes an assertion when using the GLES backend which was
caused by nothing initialising the journal_vbo variable.
If the system clock rolls back between two frames then we need
to account for the change, to avoid stopping the timeline.
The best option, since a roll back can be any arbitrary amount
of milliseconds, is to skip a frame.
Fixes bug:
http://bugzilla.moblin.org/show_bug.cgi?id=3839
The framebuffer_object spec isn't clear in defining whether attaching a
texture as a renderbuffer with mipmap filtering enabled while the mipmaps
have not been uploaded should result in an incomplete framebuffer object.
(different drivers make different decisions)
To avoid an error with drivers that do consider this a problem we explicitly
set non mipmapped filters before calling glCheckFramebufferStatusEXT. The
filters will later be reset when the texture is actually used for rendering
according to the filters set on the corresponding CoglMaterial.
Since an actor can only be parented to one container we don't need
the extra complications of maintaining a list of ChildMeta objects
attached to an actor in the default implementation of the Container
interface.
Instead of using ClutterActor for the base class of the Stage
implementation we should extend the StageWindow interface with
the required bits (geometry, realization) and use a simple object
class.
This require a wee bit of changes across Backend, Stage and
StageWindow, even though it's mostly re-shuffling.
First of all, StageWindow should get new virtual functions:
* geometry:
- resize()
- get_geometry()
* realization
- realize()
- unrealize()
This covers all the bits that we use from ClutterActor currently
inside the stage implementations.
The ClutterBackend::create_stage() virtual function should create
a StageWindow, and not an Actor (it should always have been; the
fact that it returned an Actor was a leak of the black magic going
on underneath). Since we never guaranteed ABI compatibility for
the Backend class, this is not a problem.
Internally to ClutterStage we can finally drop the shenanigans of
setting/unsetting actor flags on the implementation: if the realization
succeeds, for instance, we set the REALIZED flag on the Stage and
we're done.
As an initial proof of concept, the X11 and GLX stage implementations
have been ported to the New World Order(tm) and show no regressions.
The old code checked whether the property began with 'signal-' and
then checked for 'signal-swapped' and 'signal-after'. This prevented
you from animating a property called for example 'signal-strength'.
The check for the prefix is now in a separate function which also adds
a 'signal-swapped-after' prefix for completeness.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1798
The blend string compiler checks that the syntax of a function name is
[A-Za-z_]*, preventing the use of DOT3_RGB[A].
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The column names are optional - ClutterModel will use the GType name
if there is no user-specified column name. Hence, the ::finalize vfunc
should not try to free an empty column names vector.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1790
The default floating point type for JSON is double precision; this means
that we need to conver to single precision when setting a property with
type G_TYPE_FLOAT.
Currently, to update a property inside an animation you have to
get the interval for that property and then call the set_final_value()
method.
We can provide a simpler, bind()-like method for the convenience of
the developers that just validates everything and then calls the
Interval.set_final_value().
Right now we just check for a NULL stage before calling glXMakeCurrent().
We can, though, get a valid stage without an implementation attached to
it while we are disposing a stage after a CLUTTER_DELETE event, since the
events processing is performed on a vblank-locked basis.
ClutterClone bases its preferred size on the preferred size of
the source actor, so it needs to invalid its cached preferred
size when the preferred size of the source actor changes.
In order for this to work, we need to have notification when
the size of the source actor changes, so add a ::queue-relayout
signal to ClutterActor.
Then connect to this from ClutterClone and queue a relayout
on the clone when a relayout is queued on the source.
http://bugzilla.openedhand.com/show_bug.cgi?id=1755
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This reverts commit 3c47a3beb5.
Of course I remembered just after pushing the patch why we hadn't done
this before :-) If you look in the glsl spec:
http://www.khronos.org/registry/gles/specs/2.0/es_full_spec_2.0.24.pdf
Section 3.7.10 Texture Completeness and Non-Power-Of-Two Textures
you can see GLES 2.0 doesn't support mipmaps for npot textures.
There is possibly some way we could support this in Cogl but at least
it's not as simple as or-ing in the feature flag, sadly.
The core GLES2 API supports NPOT textures, i.e. there is no extension as for
OpenGL, so we now add COGL_FEATURE_TEXTURE_NPOT to the feature flags in
_cogl_features_init.
Thanks to Gordon Williams for spotting this.
Don't let stringify.sh write to the $srcdir + use the BUILT_SOURCES var in
Makefile.am so as to ensure all .c. and .h files get generated from their
corresponding .glsl files before building other targets.
If the timeline is running backwards, the completed signal handler should
set the final state from the interval's initial value.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When rendering a glyph run from a texture we were premultiplying the
colour once in display_list_render() and then again in
display_list_render_texture(). This was causing the color to come out
wrong. This fixes bug #1775.
Thanks to Pierre-Luc Beaudoin for reporting.
The wrong part of an expression was bracketed in the test to determine
when a new texture matrix needed to be loaded which resulted in the
first pass through _cogl_material_layer_flush_gl_sampler_state
not uploading any user matrix.
clutter_text_move_word_backward/forward() calls did not use the
start argument consistently. Also, clutter_text_move_word_forward()
bound check checked the wrong end.
Fixes#1765
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When a letter key is pressed with the control key held down one of
three things will happen :-
a) If the stage is embedded within a GtkClutterEmbed the unicode value
will be filled from gdk_keyval_to_unicode. This will be the same
value as if control was not pressed (so Ctrl+V will be 'v').
b) If the stage is not in a GtkClutterEmbed and Clutter is running on
the X11 backend then it will try to fill in the unicode value from
XLookupString. This *will* take into account the control so the
unicode value will represent a control character (Ctrl+V will be
'\x16').
c) Most other backends will not bother to fill in the unicode
value. Therefore clutter_keysym_to_unicode will be used which also
does not take into account the control key (so Ctrl+V will be 'v').
For cut and paste to work in Nbtk, the control keys need to bubble up
to the parent NbtkEntry container. This works fine for 'b' but not 'a'
and 'c'.
This patch makes ClutterText always allow the event to bubble if the
key is not handled by the binding pool and the control modifier is
down.
Ideally ClutterText would always get a unicode value that takes into
account the modifiers but this is probably best left up to the input
methods.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
g-ir-compiler currently opens the library for the .gir it is compiling;
to make that work we need to set LD_LIBRARY_PATH before running
g-ir-compiler to include .libs.
(I think this may have been working earlier because there was a
hack that substituted .so with .la and tried opening that; that
works for the incorrect libclutter-glx-1.0.so but not for the
correct libclutter-glx-1.0.so.0)
http://bugzilla.openedhand.com/show_bug.cgi?id=1771
Update the sed hack for the shared library to be more robust.
Remove the --shared-library command line argument from g-ir-scanner,
as no distribution will ever ship the .la files. This effectively
reverts commit 68f8a98cfb.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Use the --shared-library option to specify the shared object to link
against when compiling the typelib from the GIR data.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Following bug #1762, the syntax of g-ir-scanner was changed in
gobject-introspection, so Clutter does not build anymore with 0.6.4.
See the bugzilla bug:
http://bugzilla.gnome.org/show_bug.cgi?id=591669
GObject-Introspection now uses a different mechanism to extract the
SONAME when building the gir file and it needs the libtool archive as
option.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When dumping a ClutterUnits structure to a string we are using a bare
g_strdup_printf(), which unfortunately is locale dependant. So, for
instance, a type of CLUTTER_UNIT_EM and a value of 42 are stringified
as:
C: 42.00 em
en_GB 42.00 em
it_IT 42,00 em
fr_FR 42,00 em
This would not be a problem -- clutter_units_from_string() allows both
'.' and ',' as fractionary part delimiters. The test suite, on the
other hand, does not know that, and it checks for exact matches with
the C locale.
Calling setlocale(LC_ALL,"C") at the beginning of the conformance test
suite is not a good idea, because it would prevent external testing; and
it's a lame cop out from doing exactly what we have to do -- pick a format
and stick with it.
Like other platforms, languages and frameworks before us, we opt to
be less liberal in what we create; so, we choose to always stringify
ClutterUnits with fractionary parts using '.' as the delimiter.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1763
Clutter advertises itself on X11 as implementing the _NET_WM_PING protocol,
which is needed to be able to detect frozen applications; this allows us to
stop the destruction of the stage by blocking the CLUTTER_DELETE event and
wait for user feedback without the Window Manager thinking that the app has
gone unresponsive.
In order to implement the _NET_WM_PING protocol properly, though, we need
to add the _NET_WM_PID property on the Stage window, since the EWMH states:
[_NET_WM_PID] MAY be used by the Window Manager to kill windows which
do not respond to the _NET_WM_PING protocol.
Meaning that an unresponsive Clutter application might not be killable by
the window manager.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1748
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
* Do _not_ use CLUTTER_MAJORMINOR to define the installation path
for the headers; we must use CLUTTER_API_VERSION for that.
* Do not put the C compiler flags in the INCLUDES directive.
Bases on a patch by: Gary Ching-Pang Lin <glin@novell.com>
It is possible to unset the size of an actor specified with set_width()
and set_height() by using:
clutter_actor_set_size (actor, -1, -1);
Which works by unsetting the :min-*-set and the :natural-*-set properties.
Calling set_width(-1) and set_height(-1) separately, though, doesn't work
thus implicitly breaking the assumption that set_size() is nothing more
than set_width()+set_height(). This was obviously due to the face that
pre-1.0 set_width() and set_height() took an unsigned integer as an
argument.
ClutterActor parses positional and dimensional properties with a
custom deserializer. We need to:
- handle G_TYPE_INT64, the default integer type for JSON-GLib
- use G_TYPE_FLOAT for properties, since Actor switched to it
for the pixel-based ones
This makes ClutterScript work again.
The json-types.h header is found by the mere fact of it being
in the project; if we are compiling against the system JSON-GLib
this could be horribly out of date.
We need to use clutter-json.h, which will include the right
header for us.
JSON-GLib moved to a single include scheme, so we should only include
json-glib.h. If we use the internal copy it doesn't matter, since the
header does the right thing.
The clutter-script-parser.c does not have a copyright and license
notices; even though the LGPL is a per-project license and not a
per-file license, having those notices in every source file is a
good idea.
