This adds public constructors which take a CoglBitmap to all primitive
texture types. This constructor should be considered the canonical
constructor for initializing the texture with data because it should
be possible to wrap any type of data in a CoglBitmap. Having at least
this single constructor avoids the need to have an explosion of
constructors such as new_from_data, new_from_pixel_buffer and
new_from_file etc.
The already available internal bitmap constructor for CoglTexture2D
has had its flags parameter removed under the assumption that flags do
not make sense for primitive textures. The meta constructor
cogl_texture_new_from_bitmap now just explicitly calls set_auto_mipmap
after constructing the texture depending on the value of the
COGL_TEXTURE_NO_AUTO_MIPMAP flag.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This interface represents any textures that are backed by a single
texture in GL and that can be used directly with the
cogl_framebuffer_draw_attributes family of functions. This currently
equates to CoglTexture2D, CoglTexture3D and CoglTextureRectangle.
The interface currently has only one method called
cogl_primitive_set_auto_mipmap. This replaces the
COGL_TEXTURE_NO_AUTO_MIPMAP flag from the CoglTextureFlags parameter
in the constructors. None of the other flags in CoglTextureFlags make
sense for primitive textures so it doesn't seem like a good idea to
need them for primitive constructors.
There is a boolean in the vtable to mark whether a texture type is
primitive which the new cogl_is_primitive function uses. There is also
a new texture virtual called set_auto_mipmap which is only required to
be implemented for primitive textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a context member to CoglBitmap which stores the context it
was created with. That way it can be used in texture constructors
which use a bitmap. There is also an internal private function to get
the context out of the bitmap which all of the texture constructors
now use. _cogl_texture_3d_new_from_bitmap has had its context
parameter removed so that it more closely matches the other bitmap
constructors.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The previous code to initialise the depth state on the default
pipeline wasn't initialising the magic number. If you later tried to
retrieve the depth state using cogl_pipeline_get_depth_state you would
end up with an invalid depth state struct and you would just get
warnings if you tried to use it for anything. This patch just replaces
the initialisation with a call to cogl_depth_state_init because it
uses the same values anyway.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
get_texture_bits_via_offscreen does not check the return value of
cogl_framebuffer_read_pixels_into_bitmap which results into never
using the fallback path texture_get_cb.
cogl_framebuffer_read_pixels_into_bitmap does not check whether the framebuffer
is properly allocated though; so fix that as well.
https://bugzilla.gnome.org/show_bug.cgi?id=673137
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This extension lets you upload texture data from a subregion of a
buffer by passing GL_UNPACK_ROW_LENGTH, GL_UNPACK_SKIP_PIXELS and
GL_UNPACK_SKIP_ROWS to glPixelStore. When this extension is available
the GLES texture driver will now avoid making a copy of the bitmap
when a subregion is used.
Note that Mesa doesn't currently advertise this extension but I've
made a patch to propose it:
http://lists.freedesktop.org/archives/mesa-dev/2012-March/020191.html
This extension allows an application to upload data in BGRA format. We
can use this to avoid a conversion in Cogl whenever it is given BGRA
data. This is quite useful when uploading data generated by Cairo
because at least on little-endian architectures that ends up as BGRA.
The patch just makes the pixel_format_to_gl implementation return
GL_BGRA_EXT for the data format and internal format whenever
COGL_PIXEL_FORMAT_BGRA_8888{,_PRE} is used.
A small caveat with this patch is that once a texture is created as
GL_BGRA, when later using glTexSubImage2D to update the texture it
must always be given data as GL_BGRA. Currently this just works out
because we store the internal format of a texture as a CoglPixelFormat
and we already swizzle the data if it does not match exactly on GLES.
However if we later switch to using a different enum for internal
formats then we might lose the ability to store the component ordering
so we'll have to think of another way to do this.
Cogl already had a vtable for the texture driver. This ended up being
used for some things that are not strictly related to texturing such
as converting between pixel formats and GL enums. Some other functions
that are driver dependent such as updating the features were not
indirected through a vtable but instead switched directly by looking
at the ctx->driver enum value. This patch normalises to the two uses
by adding a separate vtable for driver functions not related to
texturing and moves the pixel format conversion functions to it from
the texture driver vtable. It also adds a context parameter to all of
the functions in the new driver vtable so that they won't have to rely
on the global context.
Because the wayland-client-protocol.h header defines symbols that
collide with the wayland-server-protocol.h header we allow applications
to explicitly ensure that they are only including one at a time by
exposing corresponding <cogl/cogl-wayland-client.h> and
<cogl/cogl-wayland-server.h> headers. This also adds a missing guard to
cogl-texture-2d.h that it isn't included directly.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The fallback code using stb-image.c was missed out in the upgrade to
cogl_bitmap_new_for_data from commit d18b59d9e6 so it wouldn't
compile.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
• The documentation for the framebuffer and texture interfaces had a
mis-matching open and close <note> tag so DocBook got upset and the
whole documentation disappeared.
• A lot of symbols from the cogl_framebuffer_* interface were missing
from the cogl-2.0-experimental-sections.txt file.
• cogl_framebuffer_frustum had the wrong version in its Since tag:
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_framebuffer_draw_multitextured_rectangles had a typo in the
function name in the declaration so it was generating a lot of
compile warnings.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds experimental 2.0 api replacements for the cogl_rectangle[_*]
functions that don't depend on having a current pipeline set on the
context via cogl_{set,push}_source() or having a current framebuffer set
on the context via cogl_push_framebuffer(). The aim for 2.0 is to switch
away from having a statefull context that affects drawing to having
framebuffer drawing apis that are explicitly passed a framebuffer and
pipeline.
To test this change several of the conformance tests were updated to use
this api instead of cogl_rectangle and
cogl_rectangle_with_texture_coords. Since it's quite laborious going
through all of the conformance tests the opportunity was taken to make
other clean ups in the conformance tests to replace other uses of
1.x api with experimental 2.0 api so long as that didn't affect what was
being tested.
This was causing the DocBook for the documentation to be invalid so
all of the framebuffer documentation disappeared.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public convenience wrapper around
cogl_framebuffer_read_pixels_into_bitmap which allocates a temporary
CoglBitmap to read into the application's own buffer. This can only be
used for the 99% common case where the rowstride is exactly the
bpp*width and the source is the color buffer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
In theory none of the journal flushing code should be using anything
that relies on the global framebuffer stack because it should all be
using the new 2.0-style API which explicitly mentions the target
framebuffer. Eventually we want to get rid of the framebuffer stack so
we might as well remove the push and pop now.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously when adding a quad to the journal it would assume the
journal belongs to the framebuffer at the top of the framebuffer stack
and store a reference to that. We eventually want to get rid of the
framebuffer stack so we should avoid using it here. The journal now
takes a pointer back to the framebuffer in its constructor and it
always retains the pointer. As was done previously, the journal still
does not take a reference on the framebuffer unless it is non-empty so
it does not create a permanent circular reference.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_shader_compile_real spews a warning when
shader compilation fails if COGL_GL_DEBUG is
defined. This warning is never freed.
https://bugzilla.gnome.org/show_bug.cgi?id=672243
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The 1.0 wrapper for cogl_path_curve_to was using the wrong value for
y_1 so it wouldn't work.
The patch was written by Dénes Almási.
https://bugzilla.gnome.org/show_bug.cgi?id=672174
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We initially assumed that copy_sub_buffer is synchronized on
which is only the case for a subset of GPUs for example it is not
synchronized on INTEL gen6 and gen7, so we remove this assumption
for now.
We should have a specific driver / GPU whitelist if we want to enable
this.
https://bugzilla.gnome.org/show_bug.cgi?id=669122
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
None of the other cogl_is_blah functions have a const pointer so this
is just for consistency. It helps if someone is trying to have an
array of type-check function pointers to determine the Cogl object
type because in that case all of the functions would have to have the
same prototype.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This creates a CoglBitmap which points into an existing buffer in
system memory. That way it can be used to create a texture or to read
pixel data into. The function replaces the existing internal function
_cogl_bitmap_new_from_data but removes the destroy notify call back.
If the application wants notification of destruction it can just use
the cogl_object_set_user_data function as normal. Internally there is
now a convenience function to create a bitmap for system memory and
automatically free the buffer using that mechanism.
The name of the function is inspired by
cairo_image_surface_create_for_data which has similar semantics.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
On GLES, when reading texture data back it may need to allocate a
temporary CoglBitmap if the requested format is not supported by the
driver. Previously it would then copy this temporary buffer back into
the user's buffer by calling _cogl_bitmap_convert which would allocate
a second temporary buffer. It would then copy that data into the
user's buffer. This patch changes it to create a CoglBitmap which
points to the user's data and then convert directly into that buffer
using the new _cogl_bitmap_convert_into_bitmap.
This also fixes a small leak where target_bmp would not get freed if
the target format and the closest supported format do match.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The 2.0 API for querying features (cogl_has_feature etc) does not
conflict with the old 1.0 API (cogl_features_available) so we might as
well enable it when the experimental API is requested without
requesting the 2.0-only API.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The if-undefined fallback declaration for GL_PACK_INVERT_MESA was
originally added in cogl.c along with code to use it (as part of commit
6f79eb8a5a). Later on, commit
10a38bb14f moved the code that used it to
cogl-framebuffer.c but didn't move the define along with it. Do that
now.
https://bugzilla.gnome.org/show_bug.cgi?id=672038
Reviewed-by: Neil Roberts <neil@linux.intel.com>
-Removed checks for COGL_ENABLE_EXPERIMENTAL_API since these APIs are
always built into the shared library
-Re-organised the API listing a bit so that they are in alphabetical order
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This API was re-added into COGL for the 1.10.x release as of commit
361bd516f. This will be removed once we branch into the 1.11.x development
cycle.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If the matrix was reallocated we would use values from the stack
for the matrix parameters. This fixes that and also uses the
function instead of out of lining the same code.
https://bugzilla.gnome.org/show_bug.cgi?id=671985
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This is only used internally when debugging is enabled to give a
human-readable name to a GL error so we shouldn't be exporting it
outside of the library. This just adds an underscore to the symbol
name. This shouldn't end up removing any public symbols from the 1.9.8
release because by default a non-git build disables debug so it wasn't
exported anyway.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The cleanup in 185630085 removed some symbols that were previously
exported as public experimental API in Cogl 1.9.8. That release is
already well after the point where we were meant to freeze the ABI so
we probably shouldn't be breaking it again. This patch adds the
removed functions back in so that for 1.9.10 we won't have to bump the
soname. The symbols are bundled together in a new file called
cogl2-compatibility.c so that they will be easy to remove again after
we can break ABI. It is expected that we will revert this patch
immediately after branching for Cogl 1.10.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
I don't think there's really any point in this cache because the
pipeline code completely owns the point size state. Pipelines are
already compared for whether their point size state is different
before setting it so it shouldn't result in any extra calls to
glPointSize apart from maybe when the first pipeline is initially
flushed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When using the GLSL vertend on GL, the point size was being flushed in
_cogl_pipeline_vertend_glsl_start. However, this function bails out
early if the pipeline already has a usable program so it would not hit
the code to flush the point size in that case. This patch moves the
code to _cogl_pipeline_vertend_glsl_end so that it will always be
flushed if it is different. That is the same place that is flushed for
the fixed vertend.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This option to GCC makes it give a warning whenever a global function
is defined without a declaration. This should catch cases were we've
defined a function but forgot to put it in a header. In that case it
is either only used within one file so we should make it static or we
should declare it in a header.
The following changes where made to fix problems:
• Some functions were made static
• cogl-path.h (the one containing the 1.0 API) was split into two
files, one defining the functions and one defining the enums so that
cogl-path.c can include the enum and function declarations from the
2.0 API as well as the function declarations from the 1.0 API.
• cogl2-clip-state has been removed. This only had one experimental
function called cogl_clip_push_from_path but as this is unstable we
might as well remove it favour of the equivalent cogl_framebuffer_*
API.
• The GLX, SDL and WGL winsys's now have a private header to define
their get_vtable function instead of directly declaring in the C
file where it is called.
• All places that were calling COGL_OBJECT_DEFINE need to have the
cogl_is_whatever function declared so these have been added either
as a public function or in a private header.
• Some files that were not including the header containing their
function declarations have been fixed to do so.
• Any unused error quark functions have been removed. If we later want
them we should add them back one by one and add a declaration for
them in a header.
• _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and
made a public function with a declaration in cogl-framebuffer.h
• Similarly for CoglOnscreen.
• cogl_vdraw_indexed_attributes is called
cogl_framebuffer_vdraw_indexed_attributes in the header. The
definition has been changed to match the header.
• cogl_index_buffer_allocate has been removed. This had no declaration
and I'm not sure what it's supposed to do.
• CoglJournal has been changed to use the internal CoglObject macro so
that it won't define an exported cogl_is_journal symbol.
• The _cogl_blah_pointer_from_handle functions have been removed.
CoglHandle isn't used much anymore anyway and in the few places
where it is used I think it's safe to just use the implicit cast
from void* to the right type.
• The test-utils.h header for the conformance tests explicitly
disables the -Wmissing-declaration option using a pragma because all
of the tests declare their main function without a header. Any
mistakes relating to missing declarations aren't really important
for the tests.
• cogl_quaternion_init_from_quaternion and init_from_matrix have been
given declarations in cogl-quaternion.h
Reviewed-by: Robert Bragg <robert@linux.intel.com>
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the
cogl-wayland-renderer api symbols.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Some of the state when flushing a pipeline depends on the current
framebuffer being used. These are:
• The matrix stack, so that it can flip vertically or not depending on
whether the framebuffer is offscreen.
• The colormask. This is combined with the framebuffer's color mask.
• The cull face mode. If the framebuffer is offscreen then backface
culling is translated to frontface culling and vice-versa.
These states were not working if the new framebuffer draw_primitive
API was used because in that case the framebuffer is not pushed to the
framebuffer stack so it would use the wrong one. This patch changes it
to use ctx->current_draw_buffer which is a pointer to the framebuffer
whose state was last flushed.
https://bugzilla.gnome.org/show_bug.cgi?id=670793
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a small cogl_bitmap_get_buffer public function. Note that
this can return NULL if the bitmap was not created with a pixel
buffer. It might be nice to change this eventually so that all bitmaps
have a pixel buffer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The idea is that CoglPixelBuffer should just be a buffer that can be
used for pixel data and it has no idea about the details of any images
that are stored in it. This is analogous to CoglAttributeBuffer which
itself does not have any information about the attributes. When you
want to use a pixel buffer you should create a CoglBitmap which points
to a region of the attribute buffer and provides the extra needed
information such as the width, height and format. That way it is also
possible to use a single CoglPixelBuffer with multiple bitmaps.
The changes that are made are:
• cogl_pixel_buffer_new_with_size has been removed and in its place is
cogl_bitmap_new_with_size. This will create a pixel buffer at the
right size and rowstride for the given width/height/format and
immediately create a single CoglBitmap to point into it. The old
function had an out-parameter for the stride of the image but with
the new API this should be queriable from the bitmap (although there
is no function for this yet).
• There is now a public cogl_pixel_buffer_new constructor. This takes
a size in bytes and data pointer similarly to
cogl_attribute_buffer_new.
• cogl_texture_new_from_buffer has been removed. If you want to create
a texture from a pixel buffer you should wrap it up in a bitmap
first. There is already API to create a texture from a bitmap.
This patch also does a bit of header juggling because cogl-context.h
was including cogl-texture.h and cogl-framebuffer.h which were causing
some circular dependencies when cogl-bitmap.h includes cogl-context.h.
These weren't actually needed in cogl-context.h itself but a few other
headers were relying on them being included so this adds the #includes
where necessary.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to read pixels from a framebuffer into a
CoglBitmap. This replaces the internal function
_cogl_read_pixels_with_rowstride because a CoglBitmap contains a
rowstride so it can be used for the same purpose. A CoglBitmap already
has public API to make one that points to a CoglPixelBuffer so this
function can be used to read pixels into a PBO. It also avoids the
need to push the framebuffer on to the context's stack so it provides
a function which can be used in the 2.0 API after the stack is
removed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Whenever the buffer is bound with _cogl_buffer_bind Cogl now ensures
the buffer's data store has been created. Previously it would only
ensure it was created when it was first mapped or when the first data
was set on it. This is necessary if we are going to use CoglBuffers
for retrieving data from GL. In that case the buffer won't be mapped
or have data set on it before it is used.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If the fast-path inplace premult conversion can't be used then it will
now fallback to unpacking the buffer into a row of guint16s and use
the generic conversion.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds _cogl_bitmap_convert_into_bitmap which is the same as
_cogl_bitmap_convert except that it writes into an existing bitmap
instead of allocating a new one. _cogl_bitmap_convert now just
allocates a buffer and calls the new function. This is used in
_cogl_read_pixels to avoid allocating a second intermediate buffer
when the pixel format to store in is not GL_RGBA.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If we are going to unpack the data into a known format anyway we might
as well do the premult conversion instead of delaying it to do
in-place. This helps because not all formats with alpha channels are
handled by the in-place premult conversion code. This removes the
_cogl_bitmap_convert_format_and_premult function so that now
_cogl_bitmap_convert is a completely general purpose function that can
convert from anything to anything. _cogl_bitmap_convert now includes a
fast path for when the base formats are the same and the premult
conversion can be handled with the in-place code so that we don't need
to unpack and can just copy the bitmap instead.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the bitmap code was setup so that there could be an image
library used to convert between formats and then some 'fallback' code
when the image library can't handle the conversion. However there was
never any implementation of the conversion in the image library so the
fallback was always used. I don't think this split really makes sense
so this patch renames cogl-bitmap-fallback to cogl-bitmap-conversion
and removes the stub conversion functions in the image library.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_bitmap_fallback_convert now supports converting to and from all
of the pixel formats, except it continues to preserve the premult
status of the original bitmap. The pixels are unpacked into a
temporary buffer that is either 8-bits per component or 16-bits per
component RGBA depending on whether the destination format is going to
use more than 8 bits per component (eg RGBA_1010102). The packing and
unpacking code is stored in a separate header which is included twice
to generate the functions needed for both sizes of unpacked data. The
hope is that when converting between two formats that are both 8-bit
sized, such as swizzling between BGRA and RGBA, then the
multiplications and divisions in the code will be optimized out and it
shouldn't be too inefficient. Previously the inner switch statement to
decide which conversion to use only operated on one pixel at a time so
it was probably relatively slow.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There are a few places in Cogl that try to set the premult bit on a
pixel format depending on whether it has an alpha channel. However
this breaks if the pixel format is alpha-only because premultiplying
data without any RGB components doesn't make any sense. This adds an
internal macro to check for cases where we should add the premult bit
called COGL_PIXEL_FORMAT_CAN_HAVE_PREMULT. This now gets used in all
places that previously just checking for COGL_A_BIT.
https://bugzilla.gnome.org/show_bug.cgi?id=671016
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The assert could use a 'default:' label but that would stop GCC from
giving a warning when a new enum value is added.
https://bugzilla.gnome.org/show_bug.cgi?id=671016
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The Wayland winsys defines functions declared in
cogl-wayland-renderer.h so it should include the header to make sure
the declarations are right. This was breaking because currently the
header #defines the _EXP suffixes on to the function names so it would
end up exporting the wrong symbol names.
This adds api for explicitly choosing what underlying driver cogl should
use internally for rendering as well as api for querying back what
driver is actually in use.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
cogl_texture_get_data uses find_best_gl_get_data_format from the
texture driver which returns the closest format to use for retrieving
pixel data given an intended format. However this function doesn't
know about the texture we are reading data from so it doesn't know
that the data we will actually receive will have the same premult
status as the texture's format. With the GL driver, this function ends
up returning exactly the same format as passed in which means it will
never do a premult conversion. Under GLES it always returns
COGL_PIXEL_FORMAT_RGBA_8888 so it will always make the data unpremult
even if the final requested format is premultiplied.
This patch fixes it so that it copies the premult status of the
closest_format from the format of the underlying texture. That way it
will later convert or not depending on the requested target format.
Note this patch breaks test-sub-texture with the GL driver because
that is incorrectly trying to read the texture data back as RGBA_8888
even though it depends on it not doing a premult conversion. The test
was already broken with GLES2 and remains broken.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If the GL_OES_packed_depth_stencil extension is available then we can
try creating a combined depth-stencil buffer with the
GL_DEPTH24_STENCIL8 format. This adds a private flag for the feature.
https://bugzilla.gnome.org/show_bug.cgi?id=666184
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The GL_DEPTH_STENCIL format for renderbuffers is defined in a separate
extension from GL_EXT_framebuffer_object so we probably shouldn't
being trying to use it unless that extension is advertised. This just
replaces the check for whether the driver is GL for a check for a
private feature flag before trying GL_DEPTH_STENCIL. The private
feature flag is set if the extension is available on GL.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If an application tries to bind an attribute to cogl_tex_coord_in then
on GLES2 it would try to directly use that as the name of the GL
attribute. However in the generated shader that is actually #defined
to cogl_tex_coord0_in so we need to remap the name. This adds a
parameter to validate_cogl_attribute_name so that it can optionally
return a real_attribute_name. If it doesn't set this then the calling
function will default to the Cogl attribute name.
This fixes test-texture-3d with the GLES2 driver.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Needed for _cogl_texture_get_type so that C4013 warnings/implicit
declaration of ... warnings can be avoided.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The previous update missed renames of certain cogl_framebuffer_* functions
to cogl_onscreen_*, and were not updated as the glib-mkenums-generated
header no longer included experimental headers
Also, all comments in cogl.symbols are now done in C-style so that the
preprocessor will filter them out when processing cogl.symbols instead of
using ';' for commments, which could be MSVC-only
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The previous update missed renames of certain cogl_framebuffer_* functions
to cogl_onscreen_*, and were not updated as the glib-mkenums-generated
header no longer included experimental headers
Also, all comments in cogl.symbols are now done in C-style so that the
preprocessor will filter them out when processing cogl.symbols instead of
using ';' for commments, which could be MSVC-only
-Make up for the missed cogl_texture_pixmap_x11_* symbols
-Removed texture_3d _EXP suffixes
-For newly-exposed public cogl_pipeline_get_layer_*_filter APIs
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Now if COGL_ENABLE_EXPERIMENTAL_2_0_API has been defined when including
cogl.h then headers that correspond to 1.x only apis that we plan to
drop won't be included any more.
If COGL_ENABLE_EXPERIMENTAL_API is defined then you can still mix and
match 2.0 api with 1.x api in a single compilation unit.
Note: it's still possible that some 1.x symbols will still be available
when COGL_ENABLE_EXPERIMENTAL_2_0_API is defined since this patch
doesn't go through the shared headers adding guards around deprecated
functions.
This only affects people playing with the experimental api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This also replaces use of CoglHandle with a CoglTexturePixmapX11 type
instead.
This patch also ensures the CoglTexturePixmapX11 constructor take an
explicit CoglContext pointer and can return a GError consistent with
other CoglTexture constructors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This moves all the cogl_framebuffer_ apis relating to swap buffer
requests into the cogl_onscreen_ namespace since on CoglOnscreen
framebuffers have back buffers that can be swapped.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
As we move towards Cogl 2.0 we are aiming to remove the need for a
default global CoglContext and so everything should be explicitly
related to a context somehow. CoglPipelines are top level objects and
so this patch adds a context argument to cogl_pipeline_new().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There were several members of the CoglContext struct using the
CoglHandle type for things that now have replacement typedefs which
this patch fixes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl-texture-3d
api symbols.
This patch also replaces use of CoglHandle with a CoglTexture3D type
instead.
Finally this patch also ensures the CoglTexture3D constructors take an
explicit CoglContext pointer but not a CoglTextureFlags argument,
consistent with other CoglTexture constructors.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously for the wireframe debug mode we identified the users
"cogl_position_in" attribute, mapped that, created a replacement
attribute with a LINE_LIST topology and then drew the attribute with a
simple pipeline with a green colour. This meant we completely discarded
the users original pipeline which may have involved vertex processing
that would be useful to visualize in the wireframe.
The new approach instead keeps the users attributes and instead
generates CoglIndices that can be used to refererence the original
attributes in LINE_LIST topology and instead of scrapping the user's
pipeline we now create a weak copy of the original pipeline and just
replace the fragment processing with a snippet to force the output color
to be green.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This improves the implementation of _cogl_pipeline_equal() to ensure
that the cost of the function scales by the number of bits set in the
pipelines_difference variable set after calling
_cogl_pipeline_compare_differences() instead of scaling by the number of
state groups cogl tracks.
As Cogl tracks more and more state groups we don't want
_cogl_pipeline_equal() to get slower.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If setting NULL user data via cogl_object_set_user_data() and we fail to
find an entry for the given key then bail out before potentially
allocating a new entry since setting NULL data is documented to
effectively delete an entry.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This exposes cogl_pipeline_get_layer_{min,max}_filter functions so that
applications can query back the filters set using
cogl_pipeline_set_layer_filters().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The _cogl_texture_driver_pixel_format_to_gl functions for OpenGL and
OpenGLES convert CoglPixelFormats into corresponding gl enums that can
be used to upload texture data. Previously we were only handling a few
specific formats but this patch updates the functions to handle all the
formats we know about. The functions now also switch() on the format so
that we will get build time warnings if we forget to handle new formats
in these functions.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=660188
edit: tweaked the internal format returned by pixel_format_to_gl();
handled 1010102 formats and rebased -- Robert Bragg
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The previous detection was based on bits per pixel only and would
consider bpp >= 24 as X888 or 8888 24-bit color depth formats.
This commit ensures we now use the newly added
_cogl_util_pixel_format_from_masks() api that returns a CoglPixelFormat
according to channel masks and color depth. This helps to add support
for more pixel formats.
https://bugzilla.gnome.org/show_bug.cgi?id=660188
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a utility function for inferring a CoglPixelFormat from a
set of channel masks, a bits-per-pixel value, a pixel-depth value and
pixel byte order.
This plan is to use this to improve how we map X visuals to Cogl pixel
formats.
This patch was based on some ideas from Damien Leone <dleone@nvidia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=660188
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a comment to cogl-types.h where we define all the
CoglPixelFormat enums to give lots of information about the internal
representation of the format and to explain how new formats should be
allocated.
This information came from the discussion in bug #660188
Reviewed-by: Neil Roberts <neil@linux.intel.com>
30-bit color depth formats are defined by using value 13 in the least
significant nibble of the pixel format enumeration. This nibble
encodes bytes-per-pixel and byte alignment.
The _cogl_pixel_format_get_bytes_per_pixl() function is updated
accordingly to support these new formats.
https://bugzilla.gnome.org/show_bug.cgi?id=660188
edit: dropped the X101010 formats but also added 1010102 formats since
Cogl avoids exposing any padded formats and leaves it to applications to
consider the A component to be padding as needed. -- Robert Bragg
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although these are in the public headers we should assume that no one is
using them since they were never documented so no could know what they
are useful for.
If you were to guess you'd be forgiven for thinking they were bitmasks
for checking some flags to see if a format is 24 or 32 bits. If you
looked further you might instead be forgiven for thinking that if you
masked of the least significant nibble of a pixel-format then you could
check the value against these defines. Neither of the previous
operations are reliable ways to check if a format is 24 or 32bit and
instead code must use then internal
_cogl_pixel_format_get_bytes_per_pixel() api if they want to know the
pixel size for a given format which relies on a 16 entry lookup table
using the least significant nibble of a pixel-format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although it's in a public header nothing should be using this define
since it's not documented what it could be used for. The cases where we
were using it internally were quite fragile because they were trying to
mask information from the least significant nibble of CoglPixelFormat
but really that nibble just has to be dealt with using lookup tables.
The least significant nibble of a pixel format gives information about
the bytes per pixel and whether the components are byte aligned but the
information needs to be accessed using
_cogl_pixel_format_get_byes_per_pixel() and
_cogl_pixel_format_is_endian_dependant().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since (A & ~COGL_PREMULT_BIT) is basically as readable as (A &
COGL_UNPREMULT_MASK) this patch removes the mask define. Without the
mask the code is slightly more explicit and there's less risk in error
caused by us forgetting to update the COGL_UNPREMULT_MASK if the way
CoglPixelFormat is defined evolves.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds an internal utility function
_cogl_pixel_format_is_endian_dependant() that can query whether
accessing the components of a given format depends on the endianness of
the current host CPU or whether a pixel can be loaded as a word and
channels accessed using bit masking and shifting.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This moves _cogl_get_format_bpp from cogl-bitmap.c to cogl.c and renames
it to _cogl_pixel_format_get_bytes_per_pixel. This makes it clearer that
it doesn't return bits per pixel and makes the naming consistent with
other cogl api. The prototype has been moved to cogl-private.h since it
seems we should be aiming to get rid of cogl-internal.h at some point.
The patch also adds a simple gtk-doc comment since we might want to make
this api public.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
So we can get to the point where cogl.h is merely an aggregation of
header includes for the 1.x api this moves all the function prototypes
and type definitions into a cogl-context.h and a new cogl1-context.h.
Ideally no code internally should ever need to include cogl.h as it just
represents the public facing header for accessing the 1.x api which
should only be used by Clutter.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Ideally we wouldn't have exposed cogl-texture-pixmap-x11.h as a
top level header and would have just automatically included it in cogl.h
but we already have code that assumes it can be directly included.
This ensures we define __COGL_H_INSIDE__ as a reminder that it is a top
level header in case we later need to include other cogl internal cogl
headers which would cause a build time error without this defined.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The cogl_public_h variable in cogl/Makefile.am was a mixture of 1.x
headers and experimental headers which meant that glib-mkenums was
processing lots of experimental api headers. This patch lists
experimental api headers under the cogl_experimental_h variable instead.
This patch also ensures we undef the COGL_ENABLE_EXPERIMENTAL_* defines
when running the gobject introspection scanner for Cogl-1.0.gir
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The get_all_uniform_values function tries to walk the parent hierarchy
of pipelines to find pipelines overriding the uniforms state and then
grabs the values from the override. However it was accessing data
inside the ‘big state’ even if the pipeline didn't override the
uniforms state so it would crash if it encountered a parent pipeline
with no big state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The snippet hook COGL_SNIPPET_HOOK_TEXTURE_LOOKUP now gets passed an
extra variable called cogl_sampler which is the sampler attached to
this layer. For example this will be useful when implementing the blur
effect in Clutter so that it can make the texture hook for that layer
sample the texture multiple times.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There might be custom hooks that want to sample arbitrary layers
even though they aren't referenced as part of the auto generated layer
combine code. This ensures the sampler uniforms are always output for
non-null layers so at least these can be used.
We may consider changing this later to always emit a wrapper
cogl_sampleX() function for each layer so all samples of a layer can
consistently be modified by a COGL_SNIPPET_HOOK_TEXTURE_LOOKUP hook.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When generating GLSL code, the names of the builtin uniforms for the
sampler and the layer constant have been renamed to use the layer
number not the unit number. This will make it easier if we ever want
to make them public.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
In a combine string the application can specify TEXTURE_? as a source
to sample from the texture attached to a particular unit. The number
specified here was being interpreted as a unit index. This is not
helpful to applications because theoretically the unit index is an
internal implementation detail so they can't reliably determine what
it is. This patch changes them to be interpreted as layer indices
instead.
To make this work the enums in CoglPipelineCombineSource are no longer
directly mapped to GLenums. Otherwise it implies a low limit on the
number of layer indices because there are only 32 reserved numbers
between GL_TEXTURE0 and GL_ACTIVE_TEXTURE.
This also fixes a bug in the ARBfp fragend where it was generating
code using the texture type of the layer doing the referencing rather
than the layer that was being referenced.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds _cogl_pipeline_get_layer_with_flags which takes a set of
flags to modify the behaviour. The only flag currently available is
one to disable creating the layer if the layer index does not already
exist.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to replace the texture for a layer with
the default white texture. It is equivalent to calling
cogl_pipeline_set_layer_texture with NULL for the texture object
except that it also lets you choose a type for the texture. The idea
is that applications using a base pipeline to make multiple copies
that can share the generated shaders can use this function to make the
layer come into existence with the right texture type. Previously the
idiom would be to create a 1x1 dummy texture of the right type but
this ends up creating lots of redundant little textures.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When comparing the texture data for a pipeline layer it tries to get
the GL texture handle out of the texture object. However it's valid
for a layer to have a NULL texture object but in that case the code
would just crash. This patch fixes it to compare the texture types
when the texture object is NULL.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of storing the GLenum for the target of the last used texture
for a layer it now stores the CoglTextureType instead. The state name
has been renamed to 'texture type' instead of 'texture target'.
Previously the default pipeline layer would store 0 here to represent
that there is no texture. This has been changed to store
COGL_TEXTURE_TYPE_2D instead which means that all pipeline layers
always have a valid value for the texture type. Any places that were
previously fetching the texture from a layer to determine the target
(for example when generating shaders or when enabling a particular
texture target) now use the texture type instead. This means they will
work even for layers that don't have a texture.
This also changes it so that when binding a fallback texture instead
of always using a 2D texture it will now use the default texture
corresponding to the texture type of the layer. That way when the
generated shader tries to do a texture lookup for that type of texture
it will get a valid texture object. To make this work the patch adds a
default texture for 3D textures to the context and also makes the
default rectangle texture actually be a rectangle texture instead of
using a 2D texture.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds an internal function to get the type of the underlying
hardware texture for any CoglTexture. It can return one of three
values to represent 2D textures, 3D textures or rectangle textures.
The idea is that this can be used as a replacement for
cogl_texture_get_gl_texture when only the target is required to make
it a bit less GL-centric. The implementation adds a new virtual
function which all of the texture backends now implement.
The enum is in a public header because a later patch will want to use
it from the CoglPipeline API. We may want to consider making the
function public too later.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Just being a bit paranoid here, as the SDL winsys sources are dealt in the
projects as they are not built for all configurations to avoid them
included more than once in the projects, which can cause trouble.
https://bugzilla.gnome.org/show_bug.cgi?id=669785
Reviewed-by: Neil Roberts <neil@linux.intel.com>
-Adapt to the removal of _EXP mangling from many of the experimental
functions
-Adapt to newly added/replaced APIs
-_cogl_handle_atlas_texture_get_type is gone
https://bugzilla.gnome.org/show_bug.cgi?id=669785
Reviewed-by: Neil Roberts <neil@linux.intel.com>
-Add a define for COGL_HAS_GLIB_SUPPORT, the Visual C++ projects will build
GLib support for COGL for all builds at this time, unless there is a
significant call for the need of a COGL Visual C++ build with no
dependency on GLib
-Pre-define COGL_SYSDEF_POLL* as listed in the default values in commit
74974752 since Windows does not have poll.h and thus does not have special
values for these.
https://bugzilla.gnome.org/show_bug.cgi?id=669785
Reviewed-by: Neil Roberts <neil@linux.intel.com>
All CoglBuffer constructors now take an explicit CoglContext
constructor. This is part of the on going effort to adapt to Cogl API so
it no longer depends on a global, default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When using COGL_DEBUG=wireframe we were overlaying a wireframe of the
users geometry over the top of what was drawn for each primitive. It
seems to be more useful though that if the wireframe debug option has
been enabled then we should draw only the wireframes instead of
overlaying them.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since we are adapting the Cogl api to be less stateful one of the things
we no longer require is the cogl_set_source() api since a pipeline can
be explicitly passed as an argument when drawing. This means the term
"source" has been deprecated and internally we should aim to
consistently use the term "pipeline" instead. This patch updates the
journal code to use the term pipeline instead of source.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although we internally had a COGL_DEBUG_WINSYS enum we weren't providing
a way to enable that via the COGL_DEBUG environment variable. This adds
a "winsys" option that can be used to enable printing of winsys debug
notes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the display api
symbols.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds cogl_framebuffer_ apis for drawing attributes and primitives
that replace corresponding apis that depend on the default CoglContext.
This is part of the on going effort to adapt the Cogl api so it no
longer depends on a global context variable.
All the new drawing functions also take an explicit pipeline argument
since we are also aiming to avoid being a stateful api like Cairo and
OpenGL. Being stateless makes it easier for orthogonal components to
share access to the GPU. Being stateless should also minimize any
impedance miss-match for those wanting to build higher level stateless
apis on top of Cogl.
Note: none of the legacy, global state options such as
cogl_set_depth_test_enabled(), cogl_set_backface_culling_enabled() or
cogl_program_use() are supported by these new drawing apis and if set
will simply be silently ignored.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously when using the cogl_rectangle_* family of functions with a
pipeline that doesn't have a texture for a particular layer then
validate_tex_coords_cb would bail out immediately leaving the texture
coords for that layer uninitialised. This patch changes it so that it
bails out after copying in the texture coordinates instead. This was
causing problems for pipelines that were trying to completely generate
the texture values in a CoglSnippet because they wouldn't get any
texture coordinates.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This ensures we don't call swap buffer notify callback functions
immediately when they are received since it could be awkward for
applications to ensure they have dropped all necessary locks if they
don't know when callbacks might be invoked.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a cogl_kms_renderer_get_kms_fd() function that lets developers
access the kms file descriptor being used for controlling the kernel
mode setting.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The recent patch to add an api for explicitly constraining how a
renderer backend is chosen had a typo which this patch fixes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When creating a texture from a wayland buffer we create an intermediate
EGLImage that we then create a GL texture from, but we were never
destroying that EGLImage. This patch ensures we destroy the image right
after we've created the texture so we don't leak a reference to the
underlying buffer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of having each winsys implement its own list of callbacks the
list is now just attached directly to the CoglOnscreen using code in
cogl-onscreen.c. The winsys's can invoke this list of callbacks by
calling _cogl_onscreen_notify_swap_buffers(). All of the winsys's
would probably have a very similar implementation for this anyway and
I don't think it makes much sense to try and save the cost of a list
pointer in the CoglOnscreen struct.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to iterate the attributes of a
CoglPrimitive. Previously there was no way to query back the
attributes but there was methods to query back all of the other
properties.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to make a copy of a primitive. The copy is
shallow which means it will share the same attributes and attribute
buffers. This could be useful for code that wants to have multiple
similar primitives with slightly modified properties.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There was no other way to get a pointer to the texture attached to a
pipeline layer apart from the using the CoglMaterial API but I think
this was just an oversight so we should add this in. It is already
maked in the sections file for the gtk-doc.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Both the cogl_texture_get_data and _cogl_blit_begin implementations
will internally try to create an FBO for a texture and have fallbacks
if the FBO fails. However neither of them were catching errors when
allocating the framebuffer so the fallback wouldn't work properly.
This patch just adds an explicit call to cogl_framebuffer_allocate for
these uses and causes it to use the next fallback if it fails.
Based on a patch by Adel Gadllah.
https://bugzilla.gnome.org/show_bug.cgi?id=669368
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When calling cogl_texture_get_data we need to ensure that any
framebuffers rendering to the texture have flushed their journals.
https://bugzilla.gnome.org/show_bug.cgi?id=668913
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of flushing the journal whenever the current framebuffer on a
context is changed it is now flushed whenever the framebuffer is about
to be destroyed instead. To do this it implements a custom unref
function which detects when there is going to be exactly one reference
on the framebuffer and then flushes its journal. The journal now
always has a reference on the framebuffer whenever it is non-empty.
That means the unref will only cause a flush if the only thing keeping
the framebuffer alive is the entries in the journal.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The virtual function gets called in cogl_object_unref. Any definition
of a CoglObject type can replace the default unref function by using
COGL_OBJECT_DEFINE_WITH_CODE to directly manipulate the
CoglObjectClass struct. The generated object constructors set the
pointer to the default implementation. The default implementation is
exported in the private header so that any overriding implementations
can chain up to it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Unlike in GObject the type number for a CoglObject is entirely an
internal implementation detail so there is no need to make a GQuark to
make it safe to export out of the library. Instead we can just
directly use a fixed pointer address as the identifier for the type.
This patch makes it use the address of the class struct of the
identifier. This should make it faster to do type checks because it
does not need to call a function every time it wants to get the type
number.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves the pointer members of CoglObject to the top and the int
members to the bottom so that there won't be any padding inserted on
64-bit machines. This reduces the size of the struct from 80 bytes to
72.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Some GLSL-related function prototypes are GLES2-only: GL implementations
are not required to provide them.
While Mesa is perfectly happy to return a dummy function pointer for
functions it doesn't support, other platforms are more picky, and will
return NULL.
In this particular case, this commit fixes GLSL support on OSX.
https://bugzilla.gnome.org/show_bug.cgi?id=668856
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Resizing a wayland client framebuffer should not affect the viewport
of additional primitives drawn to that framebuffer before the next swap
buffers request nor should querying the framebuffer's width and height
be affected until the next swap buffers request completes.
This patch changes cogl_wayland_onscreen_resize() so it only saves the
new geometry as "pending" state internal to the given CoglOnscreen. Only
when cogl_framebuffer_swap_buffers() is next called will the pending
size be flushed to the wayland egl api.
We've avoiding using the redundant glib typedefs such as guint, gint
gpointer etc and prefer to use the equivalent C types so this patch
removes a few uses of gint that slipped past review.
This adds cogl_onscreen_template_set_swap_throttled() api that allows
developers to specify their preference for swap buffer throttling
up-front as part of the onscreen template that is used to create a
CoglDisplay when initializing Cogl. This is desirable because some
platforms may not support configuring swap throttling on a per
framebuffer basis and also since applications often want to apply the
same policy to all onscreen framebuffers anyway.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the matrix api
symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the snippet api
symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl framebuffer
symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl.h symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the onscreen
framebuffer api symbols.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the cogl-pipeline
symbols.
It proved to be inconvenient that we had a special CoglVector3 typedef
for vectors instead of just accepting pointers to float arrays because
you'd so often end up having to make awkward casts from another vector
type into a CoglVector3 and then cast back again. We're hoping that
taking float pointers instead will lead to less unnecessary casting.
We are in the process of removing all _EXP suffix mangling for
experimental APIs (Ref: c6528c4b6c) and adding missing gtk-doc
comments so that we can instead rely on the "Stability: unstable"
markers in the gtk-doc comments. This patch tackles the symbols in
cogl-renderer.h.
This allows applications to specify certain constraints that feed into
the process of selecting a CoglRenderer backend. For example
applications might depend on x11 for handling input and so they require
a backend that's also based on x11.
The shm buffer format enum values were renamed and the explicitly
premultiplied format was dropped since it's now assumed if the buffer
has an alpha component then it's premultiplied.
This function will call into the Wayland EGL platform API and resize the
surface that the window is using and update the internal dimensions for
framebuffer and viewport to reflect the change.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the swap event notification feature was only accessible as
a winsys feature using the semi-internal
cogl_clutter_winsys_has_feature. This just adds a feature ID for it so
it can also be accessed via cogl_has_feature.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Originally we decided to use #define tricks to rename all experimental
symbols so that they had an _EXP suffix so it would be a bit clearer for
those wanting to check for ABI changes that they shouldn't worry about
these experimental symbols.
We feel now though that the defines are a bit more hassle than they are
really worth, since they are one extra thing to remember when coding,
they make using gdb slightly more awkward since you have to use the real
symbol name to set breakpoints and we already have a mechanism for
declaring symbols as experimental via gtk-doc that can be used by anyone
wanting to check for ABI changes.
Instead of just using a script to remove all the #defines we are going
to go through them manually because we need to make sure the symbols
are marked as unstable via gtk-doc. This patch does a first batch of
define removals and in fact some of the symbols didn't have any
documentation at all so that needed to be added too.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This workaround code has just been incrementally carried forward since
Cogl was integrated with Clutter but really we have no idea when this
code path was ever tested. Since the work around is from before the time
of the current Cogl developers we don't know anything about the
circumstances which led to this extreme workaround instead of pushing to
fix a driver.
It seems pretty likely we can push to fix any drm based drivers so
we're removing the workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=667009
Reviewed-by: Neil Roberts <neil@linux.intel.com>
GCC will define __ARM_ARCH_4T__ when building with "-march=armv4t" so we
can check this to turn off the use of 'clz' instructions, which
otherwise would cause compile errors like "selected processor does not
support ARM mode `clz r3,r0'".
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
The GSource is created using cogl_glib_source_new which takes a
pointer to a CoglContext. The source calls cogl_poll_get_info() in its
prepare function and cogl_poll_dispatch() in its dispatch
function. The poll FDs on the source are updated according to what
Cogl reports.
The header is only included and the source only compiled if Cogl is
configured with GLib support.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously we relied on the application to send all X events through
Cogl using cogl_xlib_renderer_handle_event. This breaks the
abstraction that an application shouldn't need to know what winsys
Cogl is using. Now that we have main loop integreation in Cogl, the
Xlib-based winsys's can report that Cogl needs to block on the file
descriptor of the X connection and it can manually handle the
events.
The event retrieval can be disabled by an application if it calls the
new cogl_xlib_renderer_set_event_retrieval_enabled() function. The
event retrieval will also automatically be disabled if the application
sets a foreign display.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds two new functions:
void
cogl_poll_get_info (CoglContext *context,
CoglPollFD **poll_fds,
int *n_poll_fds,
gint64 *timeout);
void
cogl_poll_dispatch (CoglContext *context,
const CoglPollFD *poll_fds,
int n_poll_fds);
The application is expected to call the first function whenever it is
about to block to go idle, and the second function whenever it comes
out of idle. This gives Cogl winsys's the ability poll file
descriptors for events. For example when handing swap complete
notifications, it can report that it needs to block on a file
descriptor.
The two functions are backed by winsys virtual functions. There are
currently no implementations. The default handler for get_info just
reports no file descriptors and an infinite timeout.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This splits up cogl-ext-functions.h in to sets of prototypes that
can be included separately so that we can include just core
gles1 or gles2 functions without any extensions.
Since eglGetProcAddress can not be used to query core client APIs
and some implementations (notably on Android) can return a garbage
pointer instead of NULL this will allow us to explicitly check
when to use eglGetProcAddress and when to use dlsym().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If we need to realloc the uniforms overrides array for a pipeline to
insert a new override then we copy the old state into the new allocation
for the entries surrounding the inserted entry.
This patch fixes a mistake in how we copied the old entries that follow
the inserted entry since we were actually copying to begining of the new
allocation and potentially reading from beyond the extents of the old
allocation.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The foreach_sub_texture_in_region implementation tries to forward the
function on to its child texture but it was mistakenly forwarding back
on to itself so it would just recurse endlessly and crash.
The SDL winsys was missing a few minor features, such as the
implementation. This patch adds that in.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
CoglTexture2D had an assert to verify that the EGL winsys was being
used. This doesn't make any sense any more because the EGL winsys
can't be used directly but instead it is just a base winsys for the
platform winsys's. To fix this this patch adds a set of 'criteria'
flags to each winsys, one of which is 'uses EGL'. CoglTexture2D can
use this to determine if the winsys is supported.
Eventually we might want to expose these flags publically so that an
application can select a winsys based on certain conditions. For
example, an application may need a winsys that uses X or EGL but
doesn't care exactly which one it is.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Eventually we might want to have an XCB-based EGL winsys. We already
have xlib-specific API in CoglRenderer (eg, to set a foreign display)
so the application needs to be able to specifically select between XCB
and XLIB.
This also removes the POWERVR part while renaming
COGL_HAS_EGL_PLATFORM_POWERVR_X11_SUPPORT to
COGL_HAS_EGL_PLATFORM_XLIB_SUPPORT because the winsys is equally
applicable to Mesa.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves all of the code specific to the Android platform out of
cogl-winsys-egl. It is completely untested apart from that it
compiles using a dummy android/native_window.h header.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves all of the code specific to the gdl winsys out of
cogl-winsys-egl. It is completely untested apart from that it
compiles.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The egl_surface_width/height properties in CoglDisplayEGL were
accidentally being conditionally defined depending on KMS
support. They are not necessary because CoglDisplayKMS also already
stores the width/height and this was just copied over to the EGL
dipslay.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The GLX and EGL winsys backends had a check for when onscreen==NULL
in which case they would instead try to bind the dummy surface. This
wouldn't work however because it would have already crashed by that
point when it tried to get the Cogl context out of the onscreen. The
function needs a bit of refactoring before it could support this but
presumably nothing is relying on this anyway because it wouldn't work
so for now we can just remove it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
CoglXlibDisplay just contained one member called dummy_xwin. This was
not shared outside of the respective winsys's so I don't think it
really makes sense to have a separate shared struct for it. It seems
more like an implementation detail that is specific to the winsys
because for example it may be that the EGL winsys could use the
surfaceless extension and not bother with a dummy window. This will
also make it easier to factor out the Xlib-specific data in
CoglDisplayEGL to the platform data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the Xlib renderer data was meant to be the first member of
whatever the winsys data is. This doesn't work well for the EGL winsys
because it only needs the Xlib data if the X11 platform is used. The
Xlib renderer data is now instead created on demand and connected to
the object using cogl_object_set_user_data. There is a new function to
get access to it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of having #ifdefs to hook into the normal EGL winsys, the KMS
winsys now overrides any winsys functions that it wants. Where the
winsys wants to hook into a point within a function provided by the
EGL winsys there is a EGL-platform vtable which gets set on the EGL
renderer data during renderer_connect. The KMS-specific data on all of
the structures is now allocated separately by the KMS winsys and is
pointed to by a new 'platform' pointer in the EGL data.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The #ifdefs in cogl-winsys-egl have been changed so that they
additionally check renderer->winsys_vtable->id for the corresponding
winsys ID so that multiple EGL platforms can be enabled.
The is a stop-gap solution until we can move all of the EGL platforms
into their own winsys files with overrides of the EGL vtable. However
with this approach we can move one platform at a time which will make
it easier.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of just having an "EGL" renderer, there is now a separate
winsys for each platform. Currently they just directly copy the vtable
for the EGL platform so it is still only possible to have one EGL
platform compiled into Cogl. However the intention is that the
winsys-specific code for each platform will be moved into override
functions in the corresponding platform winsys.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Requests for the shell to manipulate it's state for the surface are now
abstracted through a wl_shell_surface object rather through wl_shell as
before.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There are three separate EGL_KHR_surfaceless_* extensions depending on
which GL API is being used so we should probably check the right one
depending on which driver Cogl has selected.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There were two problems stopping the KMS winsys from working with a
GLES2 driver:
• When creating the EGL context, it was missing the attribute to
select the client version so it would end up with the GLES1 API.
• When creating the depth buffer for the framebuffer it was using
GL_DEPTH_COMPONENT but only GL_DEPTH_COMPONENT16 is supported on
GLES. cogl-framebuffer already unconditionally uses this so it
probably makes sense to do the same here.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Pre-generate a .bat file to be used to generate the cogl-enum-types.[ch]
for the build process. This will greatly simplify the maintenace process
as the listing of headers to be parsed by glib-mkenums can be manifested
automatically during 'make dist', and this list changes quite a bit during
the development cycle.
Previously this header was only included on GLES2 but since 7283e0a4
the progend is used on any driver where GLSL is available. This
changes the #ifdef to check for the presence of the GLSL progend.
Based on a patch by Fan, Chun-wei
https://bugzilla.gnome.org/show_bug.cgi?id=665722
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This ensure that cogl_renderer_check_onscreen_template() doesn't call
winsys->renderer_connect() if the renderer has already been connected
as that can fail with some backends.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The compositor side wayland support enabling us to create textures from
wayland buffers needed updating since visuals were removed from the
wayland protocol.
This also fixes the #ifdef guards for the bind_wayland_display extension
in cogl-winsys-egl-feature-functions.h since it was mistakenly checking
that client-side wayland support had been enabled which won't be the
case.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since the wayland protocol doesn't currently provide a way to
retrospectively query the interfaces that get notified when a client
first connects then when using a foreign display with Cogl then we also
need api for telling cogl what compositor and shell objects to use. We
already had api for setting a foreign compositor so this patch just adds
api for setting a foreign shell.
This patch also adds documentation for all the wayland specific apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The handler for the normal attribute was missing an else so presumably
it would have crashed on GLES2.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a documentation section for CoglSnippet which gives an
overview of how to use them. It also fixes some syntax errors in the
existing documentation and adds the missing pipeline functions for
adding snippets to the documentation sections file.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Both _cogl_bitmask_set_flags and _cogl_bitmask_set_flags_array have void
return types, so just execute _cogl_bitmask_set_flags_array without
returning that to elimate a compiler warning.
https://bugzilla.gnome.org/show_bug.cgi?id=665722
Reviewed-by: Neil Roberts <neil@linux.intel.com>
For some reason the EGL spec says that the surface passed to
eglSwapBuffers must be bound as the current surface for the swap to
work. Mesa validates that this is the case and returns an error from
the swap buffers call if not.
https://bugzilla.gnome.org/show_bug.cgi?id=665604
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously flushing the matrices was performed as part of the
framebuffer state. When on GLES2 this matrix flushing is actually
diverted so that it only keeps a reference to the intended matrix
stack. This is necessary because on GLES2 there are no builtin
uniforms so it can't actually flush the matrices until the program for
the pipeline is generated. When the matrices are flushed it would
store the age of modifications on the matrix stack so that it could
detect when the matrix hasn't changed and avoid flushing it.
This patch changes it so that the pipeline is responsible for flushing
the matrices even when we are using the GL builtins. The same
mechanism for detecting unmodified matrix stacks is used in all
cases. There is a new CoglMatrixStackCache type which is used to store
a reference to the intended matrix stack along with its last flushed
age. There are now two of these attached to the CoglContext to track
the flushed state for the global matrix builtins and also two for each
glsl progend program state to track the flushed state for a
program. The framebuffer matrix flush now just updates the intended
matrix stacks without actually trying to flush.
When a vertex snippet is attached to the pipeline, the GLSL vertend
will now avoid using the projection matrix to flip the rendering. This
is necessary because any vertex snippet may cause the projection
matrix not to be used. Instead the flip is done as a forced final step
by multiplying cogl_position_out by a vec4 uniform. This uniform is
updated as part of the progend pre_paint depending on whether the
framebuffer is offscreen or not.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a hook called COGL_SNIPPET_HOOK_TEXTURE_COORD_TRANSFORM.
This can be used to alter the application of the layer user matrix to
a texture coordinate or it can bypass it altogether.
This is the first per-layer hook that affects the vertex shader state
so the patch includes the boilerplate needed to get that to work.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the function containing the default texture lookup is
always generated regardless of whether there is a snippet with a
replace string which would cause it not be used. Now this snippets are
all scanned to check for replace strings before generating the texture
lookup.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The variables caching the result of texture lookups and layer
calculations are now stored in global variables so that when a hook
for the layer processing is added the variables can still be accessed
even if the generated code is within a separate function.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The loop that generates code for a list of snippets now starts from
the first snippet that has a replace string. Any snippets before that
would be ignored so there's no point in generating code for them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The function for generating the GLSL for a list of snippets was trying
to detect the last snippet so that it could use a different function
name. However this wouldn't work if the last snippet has a different
hook. To fix this it now just counts the snippets that have the same
hook beforehand and detects the last one using the count.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of specifying the hook point when adding to the pipeline using
a separate function for each hook, the hook is now a property of the
snippet. The hook is set on construction and is then read-only.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Whenever snippets are enabled we can't determine whether the final
color will be fully opaque so we just have to assume blending should
be enabled.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a per-layer snippet hook for the texure lookup. Here the
snippet can modify the texture coordinates used for the lookup or
modify the texel resulting from the lookup. This is the first
per-layer hook so this also adds the
COGL_PIPELINE_LAYER_STATE_FRAGMENT_SNIPPETS state and all of the
boilerplate needed to make that work.
Most of the functions used by the pipeline state to manage the snippet
list has been moved into cogl-pipeline-snippet.c so that it can be
shared with the layer state.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The two loops that generate the functions for the snippets in the
fragend and vertend are very similar so to avoid code duplication this
patch moves the logic to its own function in a new
cogl-pipeline-snippet.c file.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If present, the 'replace' string will be used instead of whatever code
would normally be invoked for that hook point. It will also replace
any previous snippets.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Each snippet is now given its own function which contains the pre and
post strings. Between these strings the function will chain on to
another function. The generated cogl source is now stored in a
function called cogl_generated_source() which the last snippet will
chain on to. This should make it so that each snippet has its own
namespace for local variables and it can share variables declared in
the pre string in the post string. Hopefully the GLSL compiler will
just inline all of the functions so it shouldn't make much difference
to the compiled output.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds two new public experimental functions for attaching
CoglSnippets to two hook points on a CoglPipeline:
void cogl_pipeline_add_vertex_hook (CoglPipeline *, CoglSnippet *)
void cogl_pipeline_add_fragment_hook (CoglPipeline *, CoglSnippet *)
The hooks are intended to be around the entire vertex or fragment
processing. That means the pre string in the snippet will be inserted
at the very top of the main function and the post function will be
inserted at the very end. The declarations get inserted in the global
scope.
The snippets are stored in two separate linked lists with a structure
containing an enum representing the hook point and a pointer to the
snippet. The lists are meant to be for hooks that affect the vertex
shader and fragment shader respectively. Although there are currently
only two hooks and the names match these two lists, the intention is
*not* that each new hook will be in a separate list. The separation of
the lists is just to make it easier to determine which shader needs to
be regenerated when a new snippet is added.
When a pipeline becomes the authority for either the vertex or
fragment snipper state, it simply copies the entire list from the
previous authority (although of course the shader snippet objects are
referenced instead of copied so it doesn't duplicate the source
strings).
Each string is inserted into its own block in the shader. This means
that each string has its own scope so it doesn't need to worry about
name collisions with variables in other snippets. However it does mean
that the pre and post strings can't share variables. It could be
possible to wrap both parts in one block and then wrap the actual
inner hook code in another block, however this would mean that any
further snippets within the outer snippet would be able to see those
variables. Perhaps something to consider would be to put each snippet
into its own function which calls another function between the pre and
post strings to do further processing.
The pipeline cache for generated programs was previously shared with
the fragment shader cache because the state that affects vertex
shaders was a subset of the state that affects fragment shaders. This
is no longer the case because there is a separate state mask for
vertex snippets so the program cache now has its own hash table.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a CoglObject called CoglSnippet which will be used to store
strings used as GLSL snippets to be attached at hook points to a
CoglPipeline. The snippets can currently contain three strings:
declarations - This will be placed in the global scope and is intended
to be used to declare uniforms, attributes and
functions.
pre - This will be inserted before the hook point.
post - This will be inserted after the hook point.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_framebuffer_flush_state needs to handle the case where
ctx->current_draw_buffer is NULL because this will be set in the
destructor for CoglFramebuffer if the framebuffer being destroyed is
the current framebuffer. This patch just makes it assume all state has
changed in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This removes the limited caching of enabled attributes done by
_cogl_enable() and replaces it with a more generalized set of bitmasks
associated with the context that allow us to efficiently compare the set
of attribute locations that are currently enabled vs the new locations
that need enabling so we only have to inform OpenGL of the changes in
which locations are enabled/disabled.
This also adds a per-context hash table for mapping attribute names to
global name-state structs which includes a unique name-index for any
name as well as pre-validated information about builtin "cogl_"
attribute names including whether the attribute is normalized and what
texture unit a texture attribute corresponds too.
The name-state hash table means that cogl_attribute_new() now only needs
to validate names the first time they are seen.
CoglAttributes now reference a name-state structure instead of just the
attribute name, so now we can efficiently get the name-index for any
attribute and we can use that to index into a per-glsl-program cache
that maps name indices to real GL attribute locations so when we get
asked to draw a set of attributes we can very quickly determine what GL
attributes need to be setup and enabled. If we don't have a cached
location though we can still quickly access the string name so we can
query OpenGL.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We should not be deciding whether we need to really update the GL face
winding state at the point where a new framebuffer has been pushed, we
should be waiting until we have really been asked to flush some
framebuffer state otherwise we may do redundant work if multiple
framebuffers are pushed/popped before something is really drawn.
This integrates the face winding state tracking with the design we have
for handling most of the other framebuffer state so we benefit from the
optimizations for minimizing the cost of _cogl_framebuffer_flush_state()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We should not be deciding whether we need to really update the GL color
mask state at the point where a new framebuffer has been pushed, we
should be waiting until we have really been asked to flush some
framebuffer state otherwise we may do redundant work if multiple
framebuffers are pushed/popped before something is really drawn.
This integrates the color mask state tracking with the design we have
for handling most of the other framebuffer state so we benefit from the
optimizations for minimizing the cost of _cogl_framebuffer_flush_state()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously the cost of _cogl_framebuffer_state_flush() would always
scale by the total amount of state tracked by CoglFramebuffer even in
cases where we knew up-front that we only wanted to flush a subset of
the state or in cases where we requested to flush the same framebuffer
multiple times with no changes being made to the framebuffer.
We now track a set of state changed flags with each framebuffer and
track the current read/draw buffers as part of the CoglContext so that
we can quickly bail out when asked to flush the same framebuffer
multiple times with no changes.
_cogl_framebuffer_flush_state() now takes a mask of the state that we
want to flush and the implementation has been redesigned so that the
cost of checking what needs to be flushed and flushing those changes
now scales by how much state we actually plan to update.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There was only one place where we called _cogl_clip_state_flush() in
_cogl_framebuffer_flush_state() and we can just as well use
_cogl_clip_state_get_stack() and _cogl_clip_stack_flush() directly
instead.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The only place we were calling _cogl_clip_stack_dirty() was when
changing the current draw_buffer which also implies a change in
the current clip stack. _cogl_clip_stack_flush() would already
be able to quickly determine that the clip stack has changed by
checking ctx->current_clip_stack so there isn't really any need
to explicitly mark the clip_stack state as dirty.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The aim is to make cogl-framebuffer.c responsible for avoiding redundant
flushing of its matrix stacks so this removes the checks done directly
within cogl-matrix-stack.c.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This update some of the cogl-matrix.h documentation to be consistent
with the corresponding documentation for framebuffer matrix-stack
methods in cogl-framebuffer.h
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This removes the use of _COGL_GET_CONTEXT() from cogl-matrix-stack.c
as part of the ongoing effort to evolve cogl to get rid of the need for
a default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
_cogl_path_fill_nodes_with_clipped_rectangle() sometimes falls back to
pushing a framebuffer clip region and filling the region using
cogl_rectangle(). Since we aim to eventually deprecate
cogl_clip_push_from_path() as it relies on the default CoglContext we
would rather this internal code update a framebuffer's clip-state using
the cogl_framebuffer clip stack api instead.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This updates some of the cogl2-clip-state.h cogl_clip_ API documentation
to make it consistent with the documentation for corresponding
framebuffer clip stack API in cogl-framebuffer.h
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This updates some of the cogl.h cogl_clip_ API documentation to make it
consistent with the documentation for corresponding framebuffer clip
stack API in cogl-framebuffer.h
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds CoglFramebuffer methods for accessing the clip stack. We plan
on making some optimizations to how framebuffer state is flushed which
will require us to track when a framebuffer's clip state has changed.
This api also ties in to the longer term goal of removing the need for a
default global CoglContext since these methods are all implicitly
related to a specific context via their framebuffer argument.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This ensures we don't touch a framebuffer's matrix stack directly if we
are also relying on _cogl_framebuffer_flush_state(). We want to get to
the point where we can set dirty flags against framebuffer state at the
point it changes but that means we can't allow direct access to the
matrix stack. _cogl_texture_draw_and_read() has now been changed so it
uses cogl_framebuffer_ methods to update the matrix stacks including
adding new internal _cogl_framebuffer_push/pop_projection() functions
that allow us to set transient projections.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a cogl_framebuffer_identity_matrix() method that can be used
to reset the current modelview matrix to the identity matrix.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This updates the cogl.h matrix stack documentation consistent with the
corresponding documentation in cogl-framebuffer.h for the framebuffer
matrix stack methods.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds cogl_framebuffer_ methods to update the modelview and
projection matrix stacks to replace functions like cogl_translate(),
cogl_rotate() and cogl_scale() etc.
This is part of the on-going effort to get rid of the global CoglContext
pointer since the existing methods don't take an explicit pointer to a
CoglContext. All the methods are now related to a context via the
framebuffer.
We added framebuffer methods instead of direct context methods because
the matrix stacks are per-framebuffer and as well as removing the global
CoglContext we would rather aim for a more direct state access API
design than, say, cairo or OpenGL, so we'd like to avoid needing the
cogl_push/pop_framebuffer(). We anticipate that Cogl will mostly be
consumed by middleware graphics layers such as toolkits or game engines
and feel that a more stateless model will avoid impedance mismatches if
higher levels want to expose a stateless model to their developers and
statefullness can still be added by higher levels if really desired.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds an experimental cogl_matrix_orthographic() function that is
more consistent with other Cogl api by taking x_1, y_1, x_2, y_2
arguments to define the top-left and bottom-right coordinates of the
orthographic coordinates instead of OpenGL style left, right, bottom and
top values.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This improves the documentation for cogl_texture_set_region() and
cogl_texture_set_region_from_bitmap() to explain that the region can't
be larger than the source data and also adds runtime assertions that
such a request isn't made.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The documentation for CoglPipelineCullFaceMode had a repeated typo with
"called" being used instead of "culled" which this fixes.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When saving the CRTC we were trying to use a struct member for the encoder
that wasn't valid at that point in time - instead use the local variable.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_pipeline_init_multi_property_sparse_state was missing a break in
the case statement handling uniforms. This doesn't yet matter because
it is the last one handled anyway but it will bite someone later.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
We were missing various platform header includes in
cogl-winsys-egl-private.h when building support for non KMS egl
platforms.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
For example when building on windows we don't want to require EGL
headers when compiling cogl-renderer.c or cogl-texture-2d.c so we make
sure not to include cogl-winsys-egl-private.h if we aren't supporting
EGL.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
A small, pedantic change to remove the use of redundant gint and GLuint
types instead of int and unsigned int.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a check for the EGL_KHR_surfaceless_opengl extension which we
depend on for being able to MakeCurrent (NO_SURFACE) as well as create a
context without and EGLConfig.
Reviewed-by: Rob Bradford <rob@linux.intel.com>
Since _cogl_winsys_kms_display_setup was basically just calling
setup_kms() it made sense to fold the code of setup_kms() back into the
_cogl_winsys_kms_display_setup() function.
Reviewed-by: Rob Bradford <rob@linux.intel.com>
So that the various internal Cogl*EGL typedefs can be available to
cogl-winsys-kms.c this moves them into cogl-winsys-egl-private.h
Reviewed-by: Rob Bradford <rob@linux.intel.com>
To start with this backend only supports creating a single CoglOnscreen
framebuffer and will automatically set is up to display fullscreen on
the first suitable crtc it can find.
To compile this backend - get some dribbly black candles, sacrifice a
goat and configure with: --enable-kms-egl-platform
Note: There is currently a problem with using GLES2 with this winsys
so you need to run with EGL_DRIVER=gl
Note: If you have problems with mesa crashing in XCB during
eglInitialize then you may need to explicitly run with EGL_PLATFORM=gbm
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When building with MSVC, symbols to be exported that point to data
need to be marked with dllimport to be successfully imported. The
_cogl_debug_flags variable is currently exported because it is used
from cogl-pango. This patch adds a COGL_EXPORT macro to cogl-util.h
which is used in cogl-debug.h
Based on a patch by Chun-wei Fan
https://bugzilla.gnome.org/show_bug.cgi?id=650020
Reviewed-by: Robert Bragg <robert@linux.intel.com>
These are the VS 2008/2010 project files to build Cogl, with a README.txt
to explain the process involved.
Note that the Cogl and Cogl-Pango projects (and filters for VS2010) are
expanded with the correct source file listings during "make dist", which
is done to simplify maintenance of these project files.
-added preconfigured config.h(.win32.in), which is expanded with the
correct versioining info during autogen
-added preconfigued cogl/cogl-defines.h.win32
-added symbols files for cogl and cogl-pango
-Have configure.ac expand the config.h.win32.in into config.h.win32
with the correct versioning info, etc, and to include the Visual C++
project files for distribution
-Added rules in cogl/Makefile.am to expand the cogl VS 2008/2010 projects
and filters from the templates with up-to-date source file listings, to
distribute cogl-enum-types.c, cogl-enum-types.h to ease compilation and
to avoid depending on PERL on Windows installations.
-Added rules in cogl-pango/Makefile.am to expand the cogl-pango VS2008/
2010 projects and filters from the templates with up-to-date source file
listings.
-Added/edited various Makefile.am's in build to distribute the VS2008/2010
project files and associated items required for the build.
-Update .gitignore. There needs to be a pre-configured
config.h(.win32) and its template, config.h.win32.in for Visual C++
builds
https://bugzilla.gnome.org/show_bug.cgi?id=650020
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When comparing uniform values, it was not correctly handling the case
where pipeline0 has the value set but pipeline1 does not (only the
other way around) so it would crash.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Deal with c99ism... I know it's not pretty, but it is the way
to go with non-c99 compilers. That's life...
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When the flags contain a value that only has the most-significant bit
set then ffsl will return the size of an unsigned long. According to
the C spec it is undefined what happens when shifting by a number
greater than or equal to the size of the left operand. On Intel (and
probably others) this seems to end up being a no-op so the iteration
breaks. To fix this we can split the shift into two separate
shifts. We always need to shift by at least one bit so we can put this
one bit shift into a separate operator.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The uniform names are now stored in a GPtrArray instead of a linked
list. There is also a hash table to speed up converting names to
locations.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the uniform overrides were stored in a linked list. Now
they are stored in a g_malloc'd array. The values are still tightly
packed so that there is only a value for each uniform that has a
corresponding bit in override_mask. The allocated size of the array
always exactly corresponds to the number of bits set in the
override_mask. This means that when a new uniform value is set on a
pipeline it will have to grow the array and copy the old values
in. The assumption is that setting a value for a new uniform is much
less frequent then setting a value for an existing uniform so it makes
more sense to optimise the latter.
The advantage of using an array is that we can quickly jump to right
boxed value given a uniform location by doing a population count in
the bitmask for the number of bits less than the given uniform
location. This can be done in O(1) time whereas the old approach using
a list would scale by the number of bits set.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This returns a population count of all the bits that are set in the
bitmask.
There is now also a _cogl_bitmask_popcount_upto which counts the
number of bits set up to but not including the given bit index. This
will be useful to determine the number of uniform overrides to skip if
we tightly pack the values in an array.
The test-bitmask test has been modified to check these two functions.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds the following new public experimental functions to set
uniform values on a CoglPipeline:
void
cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline,
int uniform_location,
float value);
void
cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline,
int uniform_location,
int value);
void
cogl_pipeline_set_uniform_float (CoglPipeline *pipeline,
int uniform_location,
int n_components,
int count,
const float *value);
void
cogl_pipeline_set_uniform_int (CoglPipeline *pipeline,
int uniform_location,
int n_components,
int count,
const int *value);
void
cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline,
int uniform_location,
int dimensions,
int count,
gboolean transpose,
const float *value);
These are similar to the old functions used to set uniforms on a
CoglProgram. To get a value to pass in as the uniform_location there
is also:
int
cogl_pipeline_get_uniform_location (CoglPipeline *pipeline,
const char *uniform_name);
Conceptually the uniform locations are tied to the pipeline so that
whenever setting a value for a new pipeline the application is
expected to call this function. However in practice the uniform
locations are global to the CoglContext. The names are stored in a
linked list where the position in the list is the uniform location.
The global indices are used so that each pipeline can store a mask of
which uniforms it overrides. That way it is quicker to detect which
uniforms are different from the last pipeline that used the same
CoglProgramState so it can avoid flushing uniforms that haven't
changed. Currently the values are not actually compared which means
that it will only avoid flushing a uniform if there is a common
ancestor that sets the value (or if the same pipeline is being flushed
again - in which case the pipeline and its common ancestor are the
same thing).
The uniform values are stored in the big state of the pipeline as a
sparse linked list. A bitmask stores which values have been overridden
and only overridden values are stored in the linked list.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a _cogl_bitmask_set_flags function which can be used to copy
the values from a CoglBitmask to an array of unsigned longs which can
be used with the COGL_FLAGS_* macros. The values are or'd in so that
in can be used multiple times to combine multiple bitmasks.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This moves the POPCOUNTL macro from cogl-winsys-glx to cogl-util and
renames it to _cogl_util_popcountl so that it can be used in more
places. The fallback function for when the GCC builtin is not
available has been replaced with an 8-bit lookup table because the
HAKMEM implementation doesn't look like it would work when longs are
64-bit so it's not suitable for a general purpose function on 64-bit
architectures. Some of the pages regarding population counts seem to
suggest that using a lookup table is the fastest method anyway.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a function to copy one boxed value to another. It is assumed
that the destination boxed value is totally initialised (so it won't
try to free any memory in it).
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This wraps all of the calls to glUniform* in the GE() macro so that it
will detect GL errors in the right place.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The code for manipulating CoglBoxedValues is now separated from
cogl-program.c into its own file. That way when we add support for
setting uniform values on a CoglPipeline the code for storing the
values can be shared.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds some macros to iterate over all the bits set in an array of
flags. The macros are a bit awkward because it tries to avoid using a
callback pointer so that the code is inlined.
cogl_bitmask is now using these macros as well so that the logic can
be shared.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously cogl-flags was using an array of ints to store the
flags. There was a comment saying that it would be nice to use longs
but this is awkward because g_parse_debug_flags can only work in
ints. This is a silly reason not to use longs because we can just
parse multiple sets of flags per long. This patch therefore changes
cogl-flags to use longs and tweaks the debug key parsing code.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of testing each bit when iterating a bitmask, we can use ffsl
to skip over unset bits in single instruction. That way it will scale
by the number of bits set, not the total number of bits.
ffsl is a non-standard function which glibc only provides by defining
GNUC_SOURCE. However if we are compiling with GCC we can avoid that
mess and just use the equivalent builtin. When not compiling for GCC
it will fall back to _cogl_util_ffs if the size of ints and longs are
the same (which is the case on i686). Otherwise it fallbacks to a slow
function implementation.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The boilerplate for defining a GType for CoglFixed lived in
cogl-util.c but this didn't seem to make much sense seeing as nothing
in the cogl-util.h header file relates to CoglFixed and there is
already a separate C file for CoglFixed code. This also removes some
redundant header includes from cogl-util.c
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of storing only 31 bits in the pointer for a CoglBitmask, it
now assumes it can store a whole unsigned long minus the one bit used
to mark whether it has been converted to a GArray or not. This works
on the assumption that we can cast an unsigned long to a pointer and
back without losing information which I think should be true for any
platforms that Cogl is interested in. This has the advantage that on
64-bit architectures we can store 63 bits before we have to resort to
using a GArray at no extra cost. The values in the GArray are now
stored as unsigned longs as well on the assumption that it is more
efficient to load and store data in chunks of longs rather than ints.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Cogl keeps a pointer to the last used onscreen framebuffer from the
context to implement the deprecated cogl_set_draw_buffer function
which can take COGL_WINDOW_BUFFER as the target to use the last
onscreen buffer. Previously this would also take a reference to that
pointer. However that was causing a circular reference between the
framebuffer and the context which makes it impossible to clean up
resources properly when onscreen buffers are used. This patch instead
changes it to just store the pointer and then clear the pointer during
_cogl_onscreen_free as a kind of cheap weak reference.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds two new experimental public functions to replace the old
internal _cogl_pipeline_set_cull_face_state function:
void
cogl_pipeline_set_cull_face_mode (CoglPipeline *pipeline,
CoglPipelineCullFaceMode cull_face_mode);
void
cogl_pipeline_set_front_face_winding (CoglPipeline *pipeline,
CoglWinding front_winding);
There are also the corresponding getters.
https://bugzilla.gnome.org/show_bug.cgi?id=663628
Reviewed-by: Robert Bragg <robert@linux.intel.com>
cogl-utils.h needs to include cogl-defines.h so that it knows whether
COGL_HAS_GLIB_SUPPORT is defined.
https://bugzilla.gnome.org/show_bug.cgi?id=663578
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
This patch moves the call to _cogl_destroy_texture_units() from
_cogl_context_free() to later on. When destroying a GL texture the
texture units are checked. This would end up accessing invalid memory
so we need to try to destroy the texture units only after everything
that might be referencing a texture has been destroyed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Although there was a comment in cogl_texture_2d_copy_from_framebuffer
explaining that we shouldn't flush the clip state, the comment was a bit
miss-leading implying we were going to explicitly set a NULL clip. Also
we weren't actually avoiding flushing the clip state since we were
passing 0 for the CoglDrawFlags.
We now pass COGL_FRAMEBUFFER_FLUSH_SKIP_CLIP_STATE in to the flags when
flushing the framebuffer state and the comment has be updated to explain
that clipping won't affect reading from the framebuffer so we don't need
to flush it.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This api is deprecated and documented to be a NOP which wasn't actually
true. This patch actually updates the function to be a NOP. Its nice
that this gets rid of a point where we flush framebuffer state because
we are looking to add a new VirtualFramebuffer interface which will need
special consideration at each of the points we flush framebuffer state.
It was a mistake that this API was ever published, we don't believe
anyone is using the api but until we break api we have to keep the
symbol. The documented semantics are vague enough that a NOP is ok since
we never explicitly documented how the state would be flushed to GL so
there would be no way to reliably use that state anyway.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This change is one logical update to update the Wayland support. This
comprises of the following parts:
* Binding to both the shell and compositor global objects - necessary since
the API for setting top level status moved to the wl_shell interface
* The Wayland visual API went away and instead you setup the EGL surface
appropriately
* The message handling was refined to reflect the current behaviour - now
obsolete comments were removed and new comments updated
Reviewed-by: Robert Bragg <robert@linux.intel.com>
There was a comment implying that if a rgba config has been requested
but no suitable config was found then we would automatically fall back
to an rgb config instead. Actually if no rgba visual is found we simply
fail without any automatic fall back because Cogl is not in a good
position to judge if automatic fall backs are acceptable for higher
level apis such as clutter.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
On GLES2, we need to specify an array size for the texture coord
varying array. Previously this size would be decided in one of the
following ways:
- For generated vertex shaders it is always the number of layers in
the pipeline.
- For generated fragment shaders it is the highest sampled texture
unit in the pipeline or the number of attributes supplied by the
primitive, whichever is higher.
- For user shaders it is usually the number of attributes supplied by
the primitive. However, if the application tries to compile the
shader and query the result before using it, it will always be at
least 4.
These shaders can quite easily end up with different values for the
declaration which makes it fail to link. This patch changes it so that
all of the shaders are generated with the maximum of the number of
texture attributes supplied by the primitive and the number of layers
in the pipeline. If this value changes then the shaders are
regenerated, including user shaders. That way all of the shaders will
always have the same value.
https://bugzilla.gnome.org/show_bug.cgi?id=662184
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This documents that cogl_texture_get_rowstride() is deprecated (or
rather it was a mistake that the api was ever published) and also
clarifies the rowstride argument documentation for
cogl_texture_get_data() to explain how it's automatically calculated
when 0 is passed to help avoid misleading people into thinking that
cogl_texture_get_rowstride() is an appropriate way to get a valid
rowstride for that.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Xlib headers define many trivially named objects which can later cause
name collision problems when only cogl.h header is included in a program
or library. Xlib headers are now only included through including the
standalone header cogl-xlib.h.
https://bugzilla.gnome.org/show_bug.cgi?id=661174
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Instead of emulating _CLAMP_TO_EDGE in cogl-primitives.c we now defer to
cogl_meta_texture_foreach_in_region() to support _CLAMP_TO_EDGE for us.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
cogl_meta_texture_foreach_in_region() now directly supports
CLAMP_TO_EDGE wrap modes. This means the cogl_rectangle code will be
able to build on this and makes the logic accessible to anyone
developing custom primitives that need to support meta textures.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When associating indices with a CoglPrimitive you are now forced to
specify the number of indices that should be read when drawing.
It's easy to forget to call cogl_primitive_set_n_vertices() after
associating indices with a primitive (and anyway you can see that someone
could be led to believe Cogl can determine that implicitly somewhow) so
this should avoid a lot of mistakes with using the API.
We'd expect that setting indices and updating the n_vertices property
would go hand in hand 99% of the time anyway so this change should
be more convenient as well as less error prone.
This patch adds some documentation for cogl_primitive_set_indices and
cogl_primitive_get/set_n_vertices. It also tries to clarify how the
CoglPrimitive:n_vertices property is updated and what that property
means in relation to other functions too.
https://bugzilla.gnome.org/show_bug.cgi?id=661019
Reviewed-by: Neil Roberts <neil@linux.intel.com>
if a normalize factor of 1 is passed then we don't need to normalize the
starting point to find the closest point equivalent to 0.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This exposes cogl_sub_texture_new() and cogl_is_sub_texture() as
experimental public API. Previously sub-textures were only exposed via
cogl_texture_new_from_sub_texture() so there wasn't a corresponding
CoglSubTexture type. A CoglSubTexture is a high-level texture defined as
a sub-region of some other parent texture. CoglSubTextures are high
level textures that implement the CoglMetaTexture interface which can
be used to manually handle texture repeating.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
It's useful to be able to query back the number of
point_samples_per_pixel that may have previously be chosen using
cogl_framebuffer_set_samples_per_pixel().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This exposes CoglTextureRectangle in the experimental cogl 2.0 api. For
now we just expose a single constructor;
cogl_texture_rectangle_new_with_size() but we can add more later.
This is part of going work to improve our texture apis with more
emphasis on providing low-level access to the varying semantics of
different texture types understood by the gpu instead of only trying to
present a lowest common denominator api.
CoglTextureRectangle is notably useful for never being restricted to
power of two sizes and for being sampled with non-normalized texture
coordinates which can be convenient for use a lookup tables in glsl due
to not needing separate uniforms for mapping normalized coordinates to
texels. Unlike CoglTexture2D though rectangle textures can't have a
mipmap and they only support the _CLAMP_TO_EDGE wrap mode.
Applications wanting to use CoglTextureRectangle should first check
cogl_has_feature (COGL_FEATURE_ID_TEXTURE_RECTANGLE).
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since we've had several developers from admirable projects say they
would like to use Cogl but would really prefer not to pull in
gobject,gmodule and glib as extra dependencies we are investigating if
we can get to the point where glib is only an optional dependency.
Actually we feel like we only make minimal use of glib anyway, so it may
well be quite straightforward to achieve this.
This adds a --disable-glib configure option that can be used to disable
features that depend on glib.
Actually --disable-glib doesn't strictly disable glib at this point
because it's more helpful if cogl continues to build as we make
incremental progress towards this.
The first use of glib that this patch tackles is the use of
g_return_val_if_fail and g_return_if_fail which have been replaced with
equivalent _COGL_RETURN_VAL_IF_FAIL and _COGL_RETURN_IF_FAIL macros.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
when printing a matrix we aim to print out the matrix type but we
weren't checking the flags first to see if the type is valid. We now
check for the DIRTY_TYPE flag and if not set we also validate the matrix
type isn't out of range.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
In cogl_matrix_look_at we have a tmp CoglMatrix allocated on the stack
but we weren't initializing its flags before passing it to
cogl_matrix_translate which meant if we were using COGL_DEBUG=matrices
we would end up trying to print out an invalid matrix type resulting in
a crash when overrunning an array of type names.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This factors out the CoglOnscreen code from cogl-framebuffer.c so we now
have cogl-onscreen.c, cogl-onscreen.h and cogl-onscreen-private.h.
Notably some of the functions pulled out are currently namespaced as
cogl_framebuffer but we know we are planning on renaming them to be in
the cogl_onscreen namespace; such as cogl_framebuffer_swap_buffers().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds COGL_PIPELINE_WRAP_MODE_MIRRORED_REPEAT enum so that mirrored
texture repeating can be used. This also adds support for emulating the
MIRRORED_REPEAT mode via the cogl-spans API so it can also be used with
meta textures such as sliced and atlas textures.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
CoglMetaTexture is an interface for dealing with high level textures
that may be comprised of one or more low-level textures internally. The
interface allows the development of primitive drawing APIs that can draw
with high-level textures (such as atlas textures) even though the
GPU doesn't natively understand these texture types.
There is currently just one function that's part of this interface:
cogl_meta_texture_foreach_in_region() which allows an application to
resolve the internal, low-level textures of a high-level texture.
cogl_rectangle() uses this API for example so that it can easily emulate
the _REPEAT wrap mode for textures that the hardware can't natively
handle repeating of.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of using integers to represent spans we now use floats instead.
This means we are no longer forced to iterate using non-normalized
coordinates so we should hopefully be able to avoid numerous redundant
unnormalize/normalize steps when using the spans api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Since we can assume that all slices are CoglTexture2D textures we don't
need to chain on our implementation of _foreach_sub_texture_in_region
by calling _cogl_texture_foreach_sub_texture_in_region() for each slice.
We now simply determine the normalized virtual coordinates for the
current span inline and call the given callback inline too.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Currently features are represented as bits in a 32bit mask so we
obviously can't have more than 32 features with that approach. The new
approach is to use the COGL_FLAGS_ macros which lets us handle bitmasks
without a size limit and we change the public api to accept individual
feature enums instead of a mask. This way there is no limit on the
number of features we can add to Cogl.
Instead of using cogl_features_available() there is a new
cogl_has_feature() function and for checking multiple features there is
cogl_has_features() which takes a zero terminated vararg list of
features.
In addition to being able to check for individual features this also
adds a way to query all the features currently available via
cogl_foreach_feature() which will call a callback for each feature.
Since the new functions take an explicit context pointer there is also
no longer any ambiguity over when users can first start to query
features.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl provides a consistent public interface regardless of whether the
underlying GL driver supports VBOs so it doesn't make much sense to have
this feature as part of the public api. We can't break the api by
removing the enum but at least we no longer ever set the feature flag.
We now have a replacement private feature flag COGL_PRIVATE_FEATURE_VBOS
which cogl now checks for internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl provides a consistent public interface regardless of whether the
underlying GL driver supports PBOs so it doesn't make much sense to have
this feature as part of the public api. We can't break the api by
removing the enum but at least we no longer ever set the feature flag.
We now have a replacement private feature flag COGL_PRIVATE_FEATURE_PBOS
which cogl now checks for internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl doesn't currently expose public api for clip planes so it
doesn't make much sense to have this feature as part of the public api.
We can't break the api by removing the enum but at least we no longer
ever set the feature flag.
We now have a replacement private feature flag
COGL_PRIVATE_FEATURE_FOUR_CLIP_PLANES which cogl now checks for
internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl doesn't expose public api for blitting between framebuffers so it
doesn't make much sense to have this feature as part of the public api
currently. We can't break the api by removing the enum but at least we
no longer ever set the feature flag.
We now have a replacement private feature flag
COGL_PRIVATE_FEATURE_OFFSCREEN_BLIT which cogl now checks for
internally.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Although we have to leave the COGL_FEATURE_STENCIL_BUFFER enum as part
of the public api we no longer ever set this feature flag.
Cogl doesn't currently expose the concept of a stencil buffer in the
public api (we only indirectly expose it via the clip stack api) so it
doesn't make much sense to have a stencil buffer feature flag.
We now have a COGL_PRIVATE_FEATURE_STENCIL_BUFFER flag instead which
we can check when we need to use the buffer for clipping.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Actual support for yuv textures isn't fully plumbed into Cogl currently
so the check for GL_MESA_ycbcr_texture is meaningless. For now we just
remove the check.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
make sure to #include "cogl-texture-private.h" in cogl-pipeline-layer.c
otherwise the build fails on win32.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This fixes validate_first_layer_cb so that it update the override
pipeline not the user's original pipeline. It also makes the check
for when to override the wrap mode more robust by considering that
we might add more wrap modes in the future.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
To save users of the api having to manually check if each iterated span
intersects the region of interest we now guarantee that any span
iterated implicitly intersects the region of interest.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This make the CoglTexture2DSliced type public and adds
cogl_texture_2d_sliced_new_with_size() as an experimental API that can
be used to construct a sliced texture without any initial data.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a new experimental function, cogl_clip_push_primitive, that
allows you to push a CoglPrimitive onto the clip stack. The primitive
should describe a flat 2D shape and the geometry shouldn't include any
self intersections. When pushing a primitive you also need to tell
Cogl what the bounding box of that shape is (in shape local coordinates)
so that Cogl is able to efficiently update the required region of the
stencil buffer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds an internal _cogl_primitive_draw API that takes CoglDrawFlags
like _cogl_draw_attributes does which allows us to draw a primitive but
skip things like flushing journals, flushing framebuffer state and avoid
validating the current pipeline. This allows us to draw primitives in
places that could otherwise cause recursion.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The code that adds the silhouette of a path to the stencil buffer was
living in cogl2-path.c which seemed out of place when the bulk of the
work really related more to how the stencil buffer is managed and
basically only one line (a call to _cogl_path_fill_nodes) really related
to the path code directly.
This moves the code into cogl-clip-stack.c alone with similar code
that can add rectangle masks to the stencil buffer.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If we are asked to fill a path using any sliced textures then we need
to fallback to adding a mask of the path to the stencil buffer
and then drawing a bounding rectangle with the source textures instead.
Previously we were sharing some of the clip-stack code for adding
the path mask to the stencil buffer and being careful to check
that the current clip stack has been flushed already. We then made
sure to dirty the clip stack to be sure the path mask would be cleared
from the stencil buffer later.
This patch aims to simplify how this fallback is dealt with by just
using the public clipping API instead of relying on more fiddly tricks
to modify the stencil buffer directly without conflicting with the clip
stack.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a new experimental function, cogl_framebuffer_finish(), which
can be used to explicitly synchronize the CPU with the GPU. It's rare
that this level of explicit synchronization is desirable but for example
it can be useful during performance analysys to make sure measurements
reflect the working time of the GPU not just the time to queue commands.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds support for multisample rendering to offscreen framebuffers.
After an offscreen framebuffer is first instantiated using
cogl_offscreen_new_to_texture() it is then possible to use
cogl_framebuffer_set_samples_per_pixel() to request multisampling before
the framebuffer is allocated. This also adds
cogl_framebuffer_resolve_samples() for explicitly resolving point
samples into pixels. Even though we currently only support the
IMG_multisampled_render_to_texture extension which doesn't require an
explicit resolve, the plan is to also support the
EXT_framebuffer_multisample extension which uses the framebuffer_blit
extension to issue an explicit resolve.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds support for multisample based rendering of onscreen windows
whereby multiple point samples per pixel can be requested and if the
hardware supports that it results in reduced aliasing (especially
considering the jagged edges of polygons)
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When creating new onscreen framebuffers we need to take the
configuration in cogl terms and translate that into a configuration
applicable to any given winsys, e.g. an EGLConfig or a GLXFBConfig
or a PIXELFORMATDESCRIPTOR.
Also when we first create a context we typically have to do a very
similar thing because most OpenGL winsys APIs also associate a
framebuffer config with the context and all future configs need to be
compatible with that.
This patch introduces an internal CoglFramebufferConfig to wrap up some
of the configuration parameters that are common to CoglOnscreenTemplate
and to CoglFramebuffer so we aim to re-use code when dealing with the
above two problems.
This patch also aims to rework the winsys code so it can be more
naturally extended as we start adding more configureability to how
onscreen framebuffers are created.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds cogl_framebuffer_discard_buffers API that allows applications
to explicitly discard depth and stencil buffers which really helps when
using a tile based GPU architexture by potentially avoiding the need to
save the results of depth and stencil buffer changes to system memory
between frames since these can usually be handled directly with on-chip
memory instead.
The semantics for cogl_framebuffer_swap_buffers and
cogl_framebuffer_swap_region are now documented to include an implicit
discard of all buffers, including the color buffer.
We now recommend that all rendering to a CoglOffscreen framebuffer
should be followed by a call like:
cogl_framebuffer_discard_buffers (fb,
COGL_BUFFER_BIT_DEPTH|
COGL_BUFFER_BIT_STENCIL);
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Both the GLSL and the ARBfp pipeline backends were using a variable
called last_used_for_pipeline to keep track of the last pipeline that
the shader or program state was used for. If this address is the same
as last time when the pipeline state is flushed then Cogl will only
flush the uniforms that have been modified, otherwise it will flush
all of them. The problem with this is that there was nothing to keep
that address alive so it could be destroyed and reused for a different
pipeline by the time the shader state is reused. This is quite likely
to happen in an application using legacy state because in that case
the shader state will always be used with a one-shot pipeline that
will likely be recycled in the next frame.
There is already a destroy callback to unref the shader state when the
pipeline is destroyed so this patch just makes that callback also
clear the last_used_for_pipeline pointer if it matches the pipeline
being destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=662542
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a description of the replacement Cogl names for the GLSL
builtins. It also updates some of the deprecation tags and corrects
some misinformation.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously the EGL backend was directly prodding the width/height
members of the framebuffer structure when a configure notify event is
received. However this doesn't set the dirty flag for the viewport so
Cogl will continue using the wrong viewport y offset. The GLX backend
is already using an abstraction for updating the size which does set
the flag. This patch just makes the EGL backend also use that
abstraction.
When freeing a pipeline in _cogl_pipeline_free we weren't making sure to
free the layers_cache which was leading to a memory leak.
Thanks to Sunjin Yang for finding this.
https://bugzilla.gnome.org/show_bug.cgi?id=660986
Reviewed-by: Neil Roberts <neil@linux.intel.com>
If we failed to create a native texture from pixmap via EGL or GLX then
we shouldn't call the winsys's texture_pixmap_x11_damage_notify
function. By doing the validation in cogl-texture-pixmap-x11.c the
winsys code can continue to assume that it doesn't need to verify there
is a valid tex_pixmap->winsys pointer.
Thanks to Damien Leone <dleone@nvidia.com> for catching this issue.
https://bugzilla.gnome.org/show_bug.cgi?id=660184
The previous detection was based on color depth only to determine the
texture format to use in GLX. If that worked fine at depths 24 (RGB8)
and 32 (ARGB8), that would fail at depth 30 (BGR10) and fallback to
software instead of using the TFP extension.
This commit uses an efficient population count implementation to
compare the number of 1-bits in color masks against the color depth
requested by the X client. If they are not equal this means that an
alpha channel has been requested.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
G_DISABLE_DEPRECATED is only intended for developers of Cogl and it
sometimes breaks the build for people just trying to build a
release. This patch adds an option to enable deprecated Glib
features. By default it is enabled for non-git versions of Cogl.
The patch is based on similar code in Clutter except it adds the flags
to COGL_EXTRA_CFLAGS instead of having a separate variable.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
It seems that cogl-context-private.h needs to be included before including
any of the pipeline-related stuff to avoid build errors on C89 compilers.
This is due to the recent cogl-pipeline decoupling, seems like.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
During arbfp codegen we weren't checking for NULL textures and so we
would crash when trying to query a NULL texture's GL texture target.
Since NULL texture targets result in ctx->default_gl_texture_2d_tex
being bound we can assume that a NULL texture corresponds to a
GL_TEXTURE_2D target.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This optimizes the layer and pipeline _compare_differences functions so
neither of them use the GArray api since building up the list of
ancestors by appending to a shared GArray was showing quite high on
profiles due to how frequently pipeline comparisons are made. Instead
we now build up a transient, singly linked list by allocating GList
nodes via alloca to build up the parallel lists of ancestors.
This tweaked approach actually ends up being a bit more concise than
before, we avoid the overhead of the GArray api and now avoid making any
function calls while comparing (assuming the _get_parent() calls always
inline), we avoiding needing to get the default cogl context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We only need a ctx pointer if we need to refer to the default_layer_x
layers to copy as templates so only call _cogl_context_get_default()
once we need to copy a template. _cogl_context_get_default() was
starting to show up in profiles and this was the main cause.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This splits out the core CoglPipelineLayer support code from
cogl-pipeline.c into cogl-pipeline-layer.c; it splits out the debugging
code for dumping a pipeline to a .dot file into cogl-pipeline-debug.c
and it splits the CoglPipelineNode support which is shared between
CoglPipeline and CoglPipelineLayer into cogl-node.c.
Note: cogl-pipeline-layer.c only contains the layer code directly
relating to CoglPipelineLayer objects; it does not contain any
_cogl_pipeline API relating to how CoglPipeline tracks and manipulates
layers.
This avoids using sscanf to determine the texture_unit that a
tex_coord%d_in attribute name corresponds to since that was showing high
on profiles. Instead once we know we have a "tex_coord" name then we
can simply use strtoul which is much cheaper and use the returned endptr
we get to verify we have a "_in" suffix after the number.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We've started seeing cases where we want to allocate lots of one-shot
primitives per-frame and the cost of allocating primitives becomes
important in this case since it can start being noticeable in profiles.
The main cost for allocating primitives was the GArray allocation
and appending the attributes to the array. This updates the code to
simply over allocate the primitive storage so we can embed the list
of attributes directly in that allocation.
If the user later sets new attributes and there isn't enough embedded
space then a separate slice allocation for the new attributes is made
but still this should be far less costly than using a GArray as before.
Most of the time we would expect when setting new attributes there will
still be the same number of attributes, so the embedded space can simple
be reused.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Calling g_strdup for attribute names was starting to show up in profiles
due to calling malloc for new string storage so frequently. This avoids
calling g_strdup and calls g_intern_string() instead. For the really
common case names we even avoid the cost of g_intern_string since we
can trivially relate our internal name_id to a static string.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
As part of the on going, incremental effort to purge the non type safe
CoglHandle type from the Cogl API this patch tackles most of the
CoglHandle uses relating to textures.
We'd postponed making this change for quite a while because we wanted to
have a clearer understanding of how we wanted to evolve the texture APIs
towards Cogl 2.0 before exposing type safety here which would be
difficult to change later since it would imply breaking APIs.
The basic idea that we are steering towards now is that CoglTexture
can be considered to be the most primitive interface we have for any
object representing a texture. The texture interface would provide
roughly these methods:
cogl_texture_get_width
cogl_texture_get_height
cogl_texture_can_repeat
cogl_texture_can_mipmap
cogl_texture_generate_mipmap;
cogl_texture_get_format
cogl_texture_set_region
cogl_texture_get_region
Besides the texture interface we will then start to expose types
corresponding to specific texture types: CoglTexture2D,
CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and
CoglTexturePixmapX11.
We will then also expose an interface for the high-level texture types
we have (such as CoglTexture2DSlice, CoglSubTexture and
CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an
additional interface that lets you iterate a virtual region of a meta
texture and get mappings of primitive textures to sub-regions of that
virtual region. Internally we already have this kind of abstraction for
dealing with sliced texture, sub-textures and atlas textures in a
consistent way, so this will just make that abstraction public. The aim
here is to clarify that there is a difference between primitive textures
(CoglTexture2D/3D) and some of the other high-level textures, and also
enable developers to implement primitives that can support meta textures
since they can only be used with the cogl_rectangle API currently.
The thing that's not so clean-cut with this are the texture constructors
we have currently; such as cogl_texture_new_from_file which no longer
make sense when CoglTexture is considered to be an interface. These
will basically just become convenient factory functions and it's just a
bit unusual that they are within the cogl_texture namespace. It's worth
noting here that all the texture type APIs will also have their own type
specific constructors so these functions will only be used for the
convenience of being able to create a texture without really wanting to
know the details of what type of texture you need. Longer term for 2.0
we may come up with replacement names for these factory functions or the
other thing we are considering is designing some asynchronous factory
functions instead since it's so often detrimental to application
performance to be blocked waiting for a texture to be uploaded to the
GPU.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
cogl_rectangle has some validation code to check whether the first
layer has a sliced texture. If so it will abandon the rest of the
layers and print a warning. However it was even doing this pruning and
displaying the warning if there is only one layer. This patch just
makes it check whether the pipeline actually has more than one layer
before pruning or displaying the warning but it will still fallback to
the multiple quads path.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds an internal function to set the backface culling state on a
pipeline. This includes properties to set the culling mode (front,
back or both) and also to set which face is considered the front
(COGL_WINDING_CLOCKWISE or COGL_WINDING_COUNTER_CLOCKWISE). The actual
front face flushed to GL depends on whether we are rendering to an
offscreen buffer or not. This means that when changing between on- and
off- screen framebuffers it now checks whether the last flushed
pipeline has backface culling enabled and forces a reflush of the cull
face state if so.
The backface culling is now set on a pipeline as part of the legacy
state. This is important because some code in Cogl assumes it can
flush a temporary pipeline to revert to a known state, but previously
this wouldn't disable backface culling so things such as flushing the
clip stack could get confused.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
When changing between two framebuffers that have different color masks
it now forces the pipeline to flush the mask by setting
current_pipeline_changes_since_flush. For this to work there needs to
be a common bit of code that gets called when the framebuffers are
changed that has access to both the old framebuffer and the new
framebuffer. _cogl_set_framebuffers_real can't be used for this
because when it is called from cogl_pop_framebuffer the stack entries
have already changed so it can't know the old framebuffer. This patch
adds a new function called notify_buffers_changed which should get
called whenever the buffers are changed and it explicitly gets passed
pointers to the old and new buffers. cogl_pop_framebuffer now calls
this instead of trying to use _cogl_set_framebuffers_real to force a
flush.
This patch also fixes the ctx->window_buffer pointer. Previously this
was implemented by searching in the framebuffer stack for an onscreen
framebuffer whenever the current buffers are changed. However it does
this after the stack has already changed so it won't usually find the
right buffer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The ARBfp backend can't handle fog so it tries to check for when it's
enabled and bails out. However it was checking using the global legacy
state value on the CoglContext but this doesn't necessarily reflect
the state that will actually be used by the pipeline because Cogl may
have internally pushed a different pipeline.
This patch adds an internal _cogl_pipeline_get_fog_enabled which the
ARBfp backend now uses.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Some code in Cogl such as when flushing a stencil clip assumes that it
can push a temporary simple pipeline to reset to a known state for
internal drawing operations. However this breaks down if the
application has set any legacy state because that is set globally so
it will also get applied to the internal pipeline.
_cogl_draw_attributes already had an internal flag to disable applying
the legacy state but I think this is quite awkward to use because not
all places that push a pipeline draw the attribute buffers directly so
it is difficult to pass the flag down through the layers.
Conceptually the legacy state is meant to be like a layer on top of
the purely pipeline-based state API so I think ideally we should have
an internal function to push the source without the applying the
legacy state. The legacy state can't be applied as the pipeline is
pushed because the global state can be modified even after it is
pushed. This patch adds a _cogl_push_source() function which takes an
extra boolean flag to mark whether to enable the legacy state. The
value of this flag is stored alongside the pipeline in the pipeline
stack. Another new internal function called
_cogl_get_enable_legacy_state queries whether the top entry in the
pipeline stack has legacy state enabled. cogl-primitives and the
vertex array drawing code now use this to determine whether to apply
the legacy state when drawing. The COGL_DRAW_SKIP_LEGACY_STATE flag is
now removed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Since 12b3d21aaa cogl is using the vertex attribute API to stroke a
path. However it was still manually appllying the legacy state to the
pipeline. cogl_vdraw_attributes also applies the legacy state so it
ends up getting applied twice. This patch just removes it from
_cogl_path_stroke_nodes.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
