If there was only a single mode, add the common modes to provide options
to select other resolutions than the built in default. This avoids
issues where the connector listed multiple supported modes, but where
the common modes added would exceed the possible bandwidth. We could
probably make an attempt to filter out more modes from the common mode
list to avoid these issues, but it's likely that the driver already
lists suitable modes, meaning there is no point in adding the common
modes.
The common modes were initially added[0] to add modes to connectors with
a single bundled mode, so we shouldn't regress the original bug fix.
[0] https://bugzilla.gnome.org/show_bug.cgi?id=744544
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1232
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1824>
The intel DRM driver is known for not being able to handle multi head
setups when KMS modifiers are enabled, due to the implicitly selected
modifiers, while being more suitable for single head setups, cause
bandwidth issues when a certain number of monitor times resolution and
refresh rate is configured.
We don't yet support automatically finding a combination of modifiers
that work, and have because of this disabled KMS modifiers unless the
driver actually needs it.
Lets flip this configuration the other way around, changing the current
udev rule to decide wen to *disable* KMS modifier support, as it so that
only the Intel driver has this problem, while on the other hand, there
several drivers that requires modifiers to function at all.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1792>
The input thread is in deep water doing the meta_is_*() check itself,
as that pokes the MetaMonitorManager managed by the main thread. Use
the getter from the MetaViewportInfo instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1793>
We need to pass this info from the main thread, as that pokes the
MetaMonitorManager underneath. Store it in the MetaViewportInfo
so that the input thread can use this information.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1793>
Use the new API to make sure the shaped texture has a valid size
during the next layout phase.
This is needed here because, quoting the previous commit:
When the texture size is invalidated using `invalidate_size()`, the new
size will only get calculated the next time `update_size()` is
called. This happens e.g. in `meta_shaped_texture_get_preferred_size()`
via `ensure_size_valid()`.
`update_size()` can chain up to `clutter_content_invalidate_size()`
as well as emitting a `size-changed` signal. If this happens during
layout, the result is a 'change the layout conditions during layout'
issue, causing heavy breakage in e.g. the Shell overview.
To fix this, expose `ensure_size_valid()` as API so callers can make
sure the texture has a valid size without creating redundant size
invalidations calls.
Note that if a buffer with a new size is attached we already trigger
`update_size()` explicitely, avoiding such situations.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1718
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1799>
When the texture size is invalidated using `invalidate_size()`, the new
size will only get calculated the next time `update_size()` is
called. This happens e.g. in `meta_shaped_texture_get_preferred_size()`
via `ensure_size_valid()`.
`update_size()` can chain up to `clutter_content_invalidate_size()`
as well as emitting a `size-changed` signal. If this happens during
layout, the result is a 'change the layout conditions during layout'
issue, causing heavy breakage in e.g. the Shell overview.
To fix this, expose `ensure_size_valid()` as API so callers can make
sure the texture has a valid size without creating redundant size
invalidations calls.
Note that if a buffer with a new size is attached we already trigger
`update_size()` explicitely, avoiding such situations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1799>
If only a viewport destination size is set, the noop viewport has
to take the buffer scale into account.
If a viewport source but no viewport destination size is set, the
destination size is that of the viewport source, not of the whole
texture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1786>
If a client is naive enough to assume that it can set the selection while
it has got no surfaces, mutter will simply ignore the request and leave
the selection unchanged.
This is good and the expected behavior, however the poor client that did
this will enter in an inconsistent state where it "claimed" the selection,
but nobody told it that the wl_data_source is not current.
So, when the client is focused the next time, it will receive wl_data_offers
as usual, but it will still think all the time that it is owning the
selection. In the case of GTK, that takes client-side shortcuts, so any
attempted paste will still bring back the client-side aborted selection.
To fix this, cancel the selection right away if it happened while unfocused,
the client will be able to undo its own failed selection, and not assume
that future offers are its own.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1469
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1772>
It seems to be the preferred format of the Mesa V3D driver on
Raspberry Pi 4. If the compositor doesn't advertise it then Mesa will
fallback from `zwp_linux_dmabuf_v1` to `wl_drm`, incorrectly. Meaning
it will keep using a buffer with modifiers on an interface that does
not have modifiers.
Add support for `DRM_FORMAT_ABGR2101010`. It works, and prevents Mesa
from taking its broken fallback path.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1520
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1798>
As documented in g_once_init_enter(): "While @location has a volatile qualifier,
this is a historical artifact and the pointer passed to it should not be
volatile.". And effectively this now warns with modern glibc.
Drop the "volatile" qualifier from these static variables as it's expected.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1785>
For Xwayland, mutter creates the sockets in the standard /tmp/.X11-unix
directory.
Yet, if that directory already exists, it may have been created by
another user with full control over the created socket.
To avoid that issue, if the directory /tmp/.X11-unix already exists,
check that the permissions are as we expect, i.e. the directory belongs
to either root or the user herself, is writable and has the sticky bit.
Thanks to fabian@ritter-vogt.de for reporting that issue.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1708
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1787>
Unlike other subsurface state, placement operations need to get
applied in order. As per spec:
```
Requests are handled in order and applied immediately to a pending
state. The final pending state is copied to the active state the
next time the state of the parent surface is applied.
```
Having placement operations being part of the subsurface state
makes it difficult to support arbitrary orderings. Make them
part of the parents surface pending state instead.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1691
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1768>
MetaInputSettings unref:ed the seat on destruction, but it never ref:ed
it on construction, meaning it "stole" the reference from the rightful
owner. Make MetaInputSettings less of a thief.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1775>
XIQueryPointer allocates the button state mask that we were leaking in
some places. We need to manually free this, because there is no XI
function that would do this for us.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1728>
In case the shell ignores or can't accept the restart request we should
hide the message that has been just requested to be shown.
As per ::show-restart-message signal documentation, this has to be done by
emitting the signal with a NULL message.
So follow the API properly in such case
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1780>
In non-systemd managed session we are unable to start services on
demand. Instead, gnome-session will start everything at login time,
including any X11 related service (i.e. gsd-xsettings).
However, in order to start gsd-xsettings, Xwayland needs to be started
already. Otherwise it will connect to GNOME_SETUP_DISPLAY and login will
hang at that point.
Fix this by detecting whether mutter is running in a systemd unit. If it
is, we assume that we are systemd managed and the machinery to start the
services works fine. If not, we assume that the session management may
unconditionally try to start X11 related services and Xwayland must be
started in order to not block this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1771>
On Wayland MetaInputSettings is part of the input thread. Connecting
a GSettings binding to the default ClutterSettings could result in the
change notification being emitted on the input thread. This then could
end up triggering the same handler from two different threads at the
same time. In the case of the ClutterText layout cache it was attempting
to unref the same layout twice, leading to a crash.
This can be avoided by simply removing the GSettings bind. This does not
cause changes to this setting to be missed by ClutterSettings because it
itself already sets up a bind.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1696
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1776>
When deciding if `configure` event should be sent,
`meta_window_wayland_move_resize_internal` compares requested window size
with `window->rect` size. However, `window->rect` is only updated when `commit`
is received. So the following sequence produces incorrect result:
1. a window initially has size `size1`
2. `move_resize_internal` is called with `size2`. `configure` is sent
3. `move_resize_internal` is called with `size1` to restore original size,
but `commit` for `size2` haven't arrived yet. So `window->rect` still has size
`size1`, and thus new `configure` is not sent
4. `commit` for `size2` arrives, window changes size to `size2`
Expected window size in the end: `size1`
Actual: `size2`
To fix the issue, take size from pending `configure` events into account.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1627
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1755>
This eliminates the need for any render node or device nodes, thus can
be used without any graphics hardware available at all, or with a
graphics driver without any render node available.
The surfaceless mode currently requires EGL_KHR_no_config_context to
configure the initial EGL display.
This also means we can enable the native backend tests in CI, as it
should work without any additional privileges.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Tests that creating and starting a virtual screen cast monitor works,
and that at least one one buffer is processed.
Currently the content of the buffer isn't checked more than it can be
mmap():ed. Only MemFd buffers are tested for for now, as DMA buffers
would need a surfaceless EGL context to check properly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
The new RecordVirtual API creates a virtual monitor, i.e. a region of
the stage that isn't backed by real monitor hardware. It's intended to
be used by e.g. network screens on active sessions, virtual remote
desktop screens when running headless, and scenarios like that.
A major difference between the current Record* API's is that
RecordVirtual relies on PipeWire itself to negotiate the refresh rate
and size, as it can't rely on any existing monitor, for those details.
This also means that the virtual monitor is not created until the stream
negotiation has finished and a virtual monitor resolution has been
determined.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
The area source, window source, and monitor source, currently set up the
stream size up front, given the area, maximum allowed window size or
monitor resolution, but for to be introduced sources, the size will be
negotiated using PipeWire, instead of specified via the D-Bus API. This
commit changes the internal source API to allow for this. There are
currently no users of this new behaviour.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
There may be a race between the ability to turn stream relative input
coordinates and turning them into screen coordinates, due to the future
scenario where the entity backing a stream is created and managed ad-hoc
depending on PipeWire stream negotiations.
When an input event is sent during this time, drop it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Make it possible to create persintent virtual monitors using command
line argument. This will not be the only way to create virtual monitors,
the primary way will be using the screen cast API, but using command
line argumenst is convenient for debugging purposes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
The testing currently done is:
* Creating a virtual monitor succeeds and gets the right configuration
* Painting a few times results in the expected output
* Changing the content of the stage also changes the painted content
accordingly
* Destroying the virtual monitor works as expected
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
This adds a test framework that makes it possible to compare the result
of painting a view against a reference image. Test reference as PNG
images are stored in src/tests/ref-tests/.
Reference images needs to be created for testing to be able to succeed.
Adding a test reference image is done using the
`MUTTER_REF_TEST_UPDATE` environment variable. See meta-ref-test.c for
details.
The image comparison code is largely based on the reference image test
framework in weston; see meta-ref-test.c for details.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Virtual monitors are monitors that isn't backed by any monitor like
hardware. It would typically be backed by e.g. a remote desktop service,
or a network display.
It is currently only supported by the native backend, and whether the
X11 backend will ever see virtual monitors is an open question. This
rest of this commit message describes how it works under the native
backend.
Each virutal monitor consists of virtualized mode setting components:
* A virtual CRTC mode (MetaCrtcModeVirtual)
* A virtual CRTC (MetaCrtcVirtual)
* A virtual connector (MetaOutputVirtual)
In difference to the corresponding mode setting objects that represents
KMS objects, the virtual ones isn't directly tied to a MetaGpu, other
than the CoglFramebuffer being part of the GPU context of the primary
GPU, which is the case for all monitors no matter what GPU they are
connected to. Part of the reason for this is that a MetaGpu in practice
represents a mode setting device, and its CRTCs and outputs, are all
backed by real mode setting objects, while a virtual monitor is only
backed by a framebuffer that is tied to the primary GPU. Maybe this will
be reevaluated in the future, but since a virtual monitor is not tied to
any GPU currently, so is the case for the virtual mode setting objects.
The native rendering backend, including the cursor renderer, is adapted
to handle the situation where a CRTC does not have a GPU associated with
it; this in practice means that it e.g. will not try to upload HW cursor
buffers when the cursor is only on a virtual monitor. The same applies
to the native renderer, which is made to avoid creating
MetaOnscreenNative for views that are backed by virtual CRTCs, as well
as to avoid trying to mode set on such views.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
The order of which function argument expressions are executed is
undefined, so don't rely on this for setting the background colors, as
it results in different colors on different architectures.
For example, it has been observed that the order of execution is
reversed comparing x86_64 and aarch64, making these two architectures
having different background color.
Fix this confusion, and also reproduceability in future reference tests,
by making the order of execution predictable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
It's useful to be able to have very very tiny monitors (e.g. 60x60
pixels) when doing reference testing, as tests have reference images
that the output is compared to. Smaller reference images the less
storage they use.
To avoid annoying pointless warnings when this is done, change the
pedantic workspace work area code to be more forgiving if the work area
happens to match the display size.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
When rebuilding the monitors (e.g. during hotplug), make sure to detach
the disposed monitors from any outputs before creating the new monitors.
While this isn't currently needed, as outputs are too being recreated,
with the to be introduced virtual outputs that are created for virtual
monitors, this is not always the case anymore, as these virtual outputs
are not regenerated each time anything changes.
Prepare for this by making sure that cleaning up disposed monitors
detach themself properly from the outputs, so new ones can attach
themself to outputs without running into conflicts.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
This makes it possible to pass custom properties to backends when
constructing tests. This will be used to create "headless" native
backend instances for testing the headless native backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
With this commit, it's possible to run mutter without being DRM master.
It's not yet possible to add virtual monitors, but one can for example
already add virtual input devices.
This currently doesn't try to hook up to any logind session, thus will
not have a real seat assigned. Currently it's hard coded to "seat0".
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Currently our only entry point for DRM devices is MetaKms*, but in order
to run without being DRM master, we cannot use /dev/dri/card*, nor can
we be either of the existing MetaKmsImplDevice implementation (legacy
KMS, and atomic KMS), as they both depend on being DRM master.
Thus to handle running without being DRM master (i.e. headless), add a
"dummy" MetaKmsImplDevice implementation, that doesn't do any mode
setting at all, and that switches to operate on the render node, instead
of the card node itself.
This means we still use the same GBM code paths as the regular native
backend paths, except we never make use of any CRTC backed onscreen
framebuffers.
Eventually, this "dummy" MetaKmsImplDevice will be replaced separating
"KMS" device objects from "render" device objects, but that will require
more significant changes. It will, however, be necessary for e.g. going
from being headless, only having access to a render node, to turning
into a real session, with a seat, being DRM master, and having access to
a card node.
This is currently not hooked up, but will be in a later commit.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Add a flag to MetaSeatNative and MetaSeatImpl that tells it not to
attempt to create a libinput context. This is intended to be used when
mutter is to run headless, as in without any input devices other than
virtual ones.
Currently not hooked up.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
This leaves only the atomic mode setting cap check before creating the
impl device, aiming to make it possible to create a non-mode-setting
MetaKmsImplDevice implementation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Make it possible to pass --headless as a command line argument in order
to turn the native backend "headless". This currently doesn't do
anything, but the intention is that it should not use logind nor KMS,
and work completely headless with only virtual outputs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1698>
Input settings requires a valid seat in order to initialize the a11y
settings (since commit 1609d145), however in X11 we never set it and
even if we create the input settings early (as per commit 7547891a) we
never initialize the seat for it.
This leads to startup critical errors on X11:
clutter_seat_get_pointer_a11y_settings: assertion
'CLUTTER_IS_SEAT (seat)' failed
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1763>
This commit adds the events created in the function
`meta_seat_x11_notify_devices` to the clutter events queue, which
are currently only added to the stage queue making the events not
being picked up by the `clutter_seat_handle_event_post` function.
This results in devices not getting added to the device-list of
`MetaInputSettings`.
Fixes the bug in which mouse and touchpad settings are not working in
the settings app during x11 session.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1767>
Since commit 2ceac4a device-related X11 events aren't processed anymore,
causing the input settings not to handle the devices.
This is due to the fact that we may never call clutter_seat_handle_event_post()
for such events.
While this is always happening for the native backend, it doesn't happen in
X11 because the events are removed from the queue as part of
meta_x11_handle_event(), and thus no event was queued to the stage by the
backend events source.
This also makes sure that the event post handler is called after the
event is actually processed, and not before an event is queued.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1564
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1769>
The nested backend may need to have an input setting implementation,
while we don't want to change the host settings (re-using an X11 input
settings) we can add a dummy implementation, until something more
complex is needed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1769>
The sync ring has an API about "frames", where it is notified about
the end of frames. However, its "insert wait" call is done before
updates, meaning that some "insert waits" will never see the "after
frame" if there was no frame drawn. This will cause mismatching in the
frame counting, causing freezes in the synchronization until something
else triggers an actual frame, effectively "unfreezing" the sync ring.
Fix this by not only notifying the sync ring about frames when there
were actual frames drawn, but also on plain updates which didn't result
in a drawn frame.
Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/1516
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1754>
When a gtk theme uses larger shadows for the unfocused state than for
the focused one, this can cause a crash in meta_frame_left_click_event.
Since whether to call meta_frame_left_click_event is decided based on
the decoration size before focusing and the control that was clicked on
after focusing, this can result in an event handled in
meta_frame_left_click_event being on the client area.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1668
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1748>
With commit 7d78768809 we switched to
storing pointer coordinates in MetaInputDeviceNative instead of
ClutterInputDevice, and while we had set the coordinates of the
ClutterInputDevice in ClutterStage when queueing an event, we now set
the MetaInputDeviceNative coordinates in new_absolute_motion_event().
Here a small mistake snuck in: new_absolute_motion_event() only
translates the coordinates of the event, but we call
meta_input_device_native_set_coords() using the x and y variables
(which remain untranslated), so now the input device coordinates are no
longer translated.
Fix that by translating the coordinates of the x and y variables in case
we're we handling a tablet/stylus event instead of only translating the
event coordinates.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1685
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1760>
This fixes the interpolate test to not use the wall clock, but the
monotonic clock. It also cleans up the timestamp granularity naming, so
that the different granularity is clearer, as in the test, different
timestamps have different granularity.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1751>
This more or less rewrites this test so that it explicitly tests the
"interpolation" when a timeline loops, i.e. that if something occupies
the thread when a timeline was supposed to have looped, we end up in the
right place "in the middle" of the next timeline cycle.
The test more or less does this:
* Start a 3 second looping timeline
* Sleep so that we're in the middle of the first cycle
* Sleep again so that we end up in the middle of the next cycle
The semantics checked are that we see the following frames:
* The first frame with timestamp 0
* The second frame in the middle of the first cycle (timestamp ~= 1.5
sceonds)
* The third frame in the end of the first cycle (timestamp == 3.0
seconds)
* The fourth frame, first in the second cycle, with timestamp ~= 1.5
seconds)
This means we can increase the "grace period" to the double (from 0.5 s
to 1 s), while at the same time decrease the time spent running the test
(from 10 s to 4.5 s). This should hopefully make the test less flaky,
especially in slower runners, e.g. aarch64.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1751>
With commit c985753442 the support for
multiple hardware cursors broke, but those were never properly supported
anyway as we usually assume there's only one hardware cursor around.
With the introduction of the KMS thread in the future, we'll only have
one KMS cursor that gets updated directly from the input thread. So
apart from the fact that it never really makes sense to have two cursors
visible, in this new model having multiple cursors won't work anyway.
So make the cursor we show for stylii a software cursor again.
Eventually the plan is to make the input device that's driving the KMS
cursor interchangeable, so that we can always use hardware cursors.
This reverts commit 165b7369c8.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1645
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1758>
This commit assumes that cursor surfaces work in a "mailbox" fashion. If
they are painted multiple times before a successful flip, all commits
but the last get discarded, and the last commit gets presented after the
flip succeeds. This is more or less how it works in the atomic backend,
and also more or less how it works in other backends, with the exception
that the cursor painting might fail without any way of knowing. This
assumption is still better than unconditionally discarding all cursor
surface feedbacks as if the cursor painting always fails.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
Regarding the sequence = 0 fallback: in some cases (moving a cursor
plane on atomic amdgpu) we get sequence = 0 in the page flip callback.
This seems like an amdgpu bug, so work around it by assuming a sequence
delta of 1 (it is equal to 1 because of the sequence != 0 check above).
Sequence can also legitimately be 0 if we're lucky during the 32-bit
overflow, in which case assuming a delta of 1 will give more or less
reasonable values on this and next presentation, after which it'll be
back to normal.
Sequence is also 0 on mode set fallback and when running nested, in
which case assuming a delta of 1 every frame is the best we can do.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
The presentation-time protocol allows surfaces to get accurate
timestamps of when their contents were shown on screen.
This commit implements a stub version of the protocol which correctly
discards all presentation feedback objects (as if the surface contents
are never shown on screen). Subsequent commits will implement sending
the presented events to surfaces shown on screen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
This concerns only the cases when the presentation timestamp is received
directly from the device (from KMS or from GLX). In the majority of
cases this timestamp is already MONOTONIC. When it isn't, after this
commit, the current value of the MONOTONIC clock is sampled instead.
The alternative is to store the clock id alongside the timestamp, with
possible values of MONOTONIC, REALTIME (from KMS) and GETTIMEOFDAY (from
GLX; this might be the same as REALTIME, I'm not sure), and then
"convert" the timestamp to MONOTONIC when needed. An example of such a
conversion was done in compositor.c (removed in this commit). It would
also be needed for the presentation-time Wayland protocol. However, it
seems that the vast majority of up-to-date systems are using MONOTONIC
anyway, making this effort not justified.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
KMS and GLX device timestamps have microsecond precision, and whenever
we sample the time ourselves it's not the real presentation time anyway,
so nanosecond precision for that case is unnecessary.
The presentation timestamp in ClutterFrameInfo is in microseconds, too,
so this commit makes them have the same precision.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
A flag indicating whether the presentation timestamp was provided by
the display hardware (rather than sampled in user space).
It will be used for the presentation-time Wayland protocol.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
A flag indicating whether the presentation timestamp was provided by the
display hardware (rather than sampled in user space).
It will be used for the presentation-time Wayland protocol.
This is definitely the case for page_flip_handler(), and I'm assuming
this is also the case for the two instances in the GLX code.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
The old calculation was introduced to improve the precision
with commit c16a5ec1cf.
Here, I call the calculation as "revision 2", and the
calculation even older as "revision 1", and the new
calculation introduced with this commit as "reivion 3".
Revision 2 has two problems:
1. The calculation is mixed with fixed-point numbers and
floating-point numbers.
To overcome the precision loss of fixed-point numbers division,
it first "calculates refresh rate in milliHz first for extra
precision", but this requires converting the value back to Hz.
An extra calculation has performance and precision costs.
It is also hard to understand for programmers.
2. The calculation has a bias.
In the process, it does:
refresh += (drm_mode->vtotal / 2);
It prevents the value from being rounded to a smaller value in
a fixed-point integer arithmetics, but it only adds a small
bias (0.0005) and consumes some fraction bits for
floating point arithmetic.
Revision 3, introduced with this commit always uses
double-precision floating-point values for true precision and
to ease understanding of this code. It also removes the bias.
Another change is that it now has two internal values, numerator
and denominator. Revision 1 also calculated those two values
first, and later performed a division with them, which minimizes
the precision loss caused by divisions. This method has risks of
overflowing the two values and revision 1 caused problems due to
that, but revision 3 won't thanks to double-precision. Therefore,
revision 3 will theoretically have the result identical with
the calculation with infinite-precision.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1737>
Handle the case of a TOUCH_BEGIN event during window dragging separately
instead of treating it like a TOUCH_UPDATE event: Simply return TRUE to
make Clutter stop event propagation if it's the pointer emulating
sequence and let Clutter propagate the event if it isn't.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/427>
Window dragging should be cancelled when the touch sequences we're using
are no longer available. Also listen to TOUCH_CANCEL events if the
window is grabbed and cancel the grab op when a TOUCH_CANCEL event
happens.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/427>
This removes the responsibility of tracking these from the backend to
the base object. The backends are instead responsible for calling the
function to update the values.
For the native backend, it's important that this happens on the correct
thread, so each time either of these states may change, post a idle
callback on the main thread that sets the, at the time of queuing said
callback, up to date state. This means that things on the main thread
will always be able to get a "new enough but not too new" state when
listening on the 'notify::' signals and getting the property value
after.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1739>
Make sure to reset all the state that was set for an interactive grab op
back to the defaults after a grab op has ended.
Especially important here is setting grab_frame_action back to FALSE,
since this will constrain window-titlebars to the panel. We set this to
TRUE on some grabs, for example when resizing, but not when moving
windows. Since this remained being set to TRUE, it would also constrain
non-grab window movements, like calling MetaWindow.move_frame(), which
is used by gnome-shells OSK. By resetting it back to FALSE after a grab,
the OSK can now always move non-maximized windows to the position it
wants.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1736>
The cache had the size 9, which was "big enough" in the past, but when
more ways pipelines could be constructed, the size was not enough. The
need to increase the cache size was hard to spot though, since adding
pipeline flag didn't give any hints about the cache being directly tied
to these flag values.
So, when enough flag bits were set when attempting to retrieve and put a
pipeline in the cache, it'd instead overwrite some arbitrary stack
memory, which would sooner or later result in a memory corruption
induced crash. Valgrind could not detect this particular memory
corruption, as it messed up stack memory, not e.g. freed heap memory, so
it instead got confused and thought plain stack values were unreadable.
Fix these two issues by making the cache size the combination of all
pipeline flags + 1, so that we can safely put any flag combination in
the cache.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1747>
If `meta_xwayland_start_xserver()` returned via an error path, some of
the socket FDs were leaked.
Fix that, and add `steal_fd()` calls to make it clearer that FDs passed
to `g_subprocess_launcher_take_fd()` are transferred to it. There were
no bugs with how `GSubprocessLauncher` was being used.
Spotted while working on
https://gitlab.gnome.org/GNOME/glib/-/issues/2332.
Signed-off-by: Philip Withnall <pwithnall@endlessos.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1738>
Each next and current scanout buffer has a reference on them making sure
they stay alive. When dumb buffers were used on the secondary GPU state,
this didn't happen, leading to crashes due to unref:ing one time too
many, with backtraces such as
0) g_type_check_instance_is_fundamentally_a ()
1) g_object_unref ()
2) secondary_gpu_release_dumb ()
3) import_shared_framebuffer ()
4) update_secondary_gpu_state_post_swap_buffers ()
5) meta_onscreen_native_swap_buffers_with_damage ()
6) cogl_onscreen_swap_buffers_with_damage ()
7) swap_framebuffer ()
8) clutter_stage_cogl_redraw_view_primary ()
9) clutter_stage_cogl_redraw_view ()
10) _clutter_stage_window_redraw_view ()
11) handle_frame_clock_frame ()
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1746>
gnome-shell has this hack where it sets the environment variable
"NO_AT_BRIDGE" to "1" before calling meta_init() and then unsets it
after meta_init() returns.
This variable being set to "1" will then cause the ATK bridge in
at-spi2-gtk to fail to load, which GTK then ignores. This is on purpose,
since accessibility is supposed to be done done by GNOME Shell via
Clutter, not via GTK.
The problem is that, now, by default, setting "NO_AT_BRIDGE" to
"1" during meta_init() only has the desired effect on an X11 session,
where we always connect to the X11 server on startup (i.e. during
meta_init()). With Xwayland on-demand, we do not attempt to create the
GDK display during meta_init(), thus this hack falls apart.
Since there are no real altenatives to this hack, just move it to
mutter, which have a better idea when GDK displays are created or not.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1744>
Commit afa43154 tried to make sure the focus was properly changed when
calling focus_default_window() by checking the focused window just after
trying to set the focus.
However, the X11 “Inter-Client Communication Conventions Manual” version
2.0 (ICCCM 2 for short) states that some X11 client may want to use a so
called “globally active input” model in which case the client expects
keyboard input and set input focus even when it's not one of its own
window.
To comply with this, when dealing with such clients, mutter will not
change the focus and send a WM_TAKE_FOCUS message instead.
That mechanism will defeat the logic introduced by commit afa43154
because the focused window is not changed in this case. As a result, the
input focus will fallback to the no-focus window.
To avoid this, only check that the focus change occurred for windows
using a synchronous focus model.
v2: Split specific test for "globally active input" model (Florian).
v3: Remove the check for window->unmanaging which is useless (Jonas).
Fixes: afa43154 - "core: Make sure focus_default_window() worked"
Close: https://gitlab.gnome.org/GNOME/mutter/-/issues/1620
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1716>
X11 clients can use different models of input handling, of which some
may not result focus being set synchronously.
For such clients, meta_focus_window() will not change the focus itself
but rely on the client itself to set the input focus on the desired
window.
Add a new MetaWindow API to check when dealing with such a window.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1716>
Without these devices, things that depend on the existance of input
device classes won't know about the existance of e.g. pointer devices,
if the only pointer device is from a virtual one.
This requires handling situations where e.g. a device doesn't have a
device node thus can't be matched against a udev device.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1688>
Libinput will queue a few initial events when a seat is assigned to the
udev backend; a result of it probing udev adding detected devices. For
us to see these events, we need to dispatch libinput before going idle,
as nothing will show up on the libinput file descriptor until something
else (e.g. keyboard event or mouse movement) wakes us up.
Do this by adding a prepare() function to the libinput GSource, that
checks whether there are any events in the queue already, and return
TRUE if so is the case, causing us to dispatch before going fully idle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1688>
The API for NotifyKeyboardKeycode() does not mention what type of
keycode is expected to be submitted.
So, clarify in the API that the keycode to submit is expected to be an
evdev keycode.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1732>
Currently, when a remote desktop user submits a keycode, it will be
interpreted differently, when using the x11 session, instead of a
wayland session.
In a wayland session, submitting a keycode will have the expected
result (as if the key was pressed locally).
In a x11 session, this is not the case. Instead of getting the expected
key, some other key will be pressed (or sometimes even none).
The reason for this is that the native backend interprets the keycode
as evdev keycode and the x11 backend interprets the keycode as xkb
keycode.
To ensure that both backends produce the same behaviour when submitting
a keycode, fix the x11 backend to always interpret the keycode as evdev
keycode, instead of a xkb keycode.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1732>
GObject signals pass the emitting GObject as the first argument to
signal handler callbacks. When refactoring the grab-op-begin/end signals
to remove MetaScreen with commit 1d5e37050d,
the "screen" argument was replaced with a "display" argument instead of
being removed completely. This made us call the signal handlers with two
identical MetaDisplay arguments, which is very confusing and actually
wasn't handled in a grab-op-begin handler in gnome-shell.
So fix this by not adding the MetaDisplay as an argument to those
signals, GObject will take care of that for us.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1734>
We're going to round the workspace backgrounds in the new overview for
gnome-shell 40.
So far corner-rounding was only possible for StWidgets because the
rounded clipping was done using cairo drawing. We now need rounded
clipping for ClutterActors too because backgrounds are drawn using
ClutterActors (or more specifically a ClutterContent). To implement
that, first a ClutterOffscreenEffect subclass together with a fragment
shader from GSK (see gskSetOutputColor() [1] in the GSK GL renderer
code) was investigated, and while that was generic and worked quite
well, it was extremely slow for the case of drawing wallpapers because
of all the FBOs that had to be allocated.
This is the new, more performant approach: Use the same fragment shader,
but perform the rounded clipping right in MetaBackgroundContent while
we're painting the wallpaper. This has almost no performance impact,
with the downside of not being a generic solution.
To allow for rounded clipping not only at the edges of the wallpaper,
but using any given bounding rectangle, the API exposes not only the
radius, but also a bounding rect.
[1] https://gitlab.gnome.org/GNOME/gtk/-/blob/master/gsk/resources/glsl/preamble.fs.glsl
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1717>
Currently, the documentation for NotifyPointerAxis() just mentions that
a smooth scroll event is emitted.
However, this is not entirely correct. For each NotifyPointerAxis(),
mutter emits an emulated discrete scrolling event based on the
submitted accumulated smooth scrolling deltas.
Additionally, it doesn't mention how the motion deltas need to be
interpreted.
So, document the NotifyPointerAxis() notification better by mentioning
the emulation of discrete scroll events, how these discrete scroll
events are calculated and how the motion deltas need to be interpreted.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1727>
When a remote desktop user emits a virtual smooth scrolling event, a
smooth scroll event, that is not emulated, is emitted and on occasion
a discrete scroll event, that is emulated, is emitted.
As base for the discrete scrolling event, the smooth scrolling steps
are accumulated.
When the accumulated smooth scrolling steps surpass the
DISCRETE_SCROLL_STEP, the discrete scrolling event is emitted.
Currently, mutter uses for DISCRETE_SCROLL_STEP the value 10, which is
a terrible value to work with, especially for high resolution mouse
wheels.
When a triple resolution mouse wheel is used, each scrolling step will
have the value 3 1/3.
Three of such events won't however surpass the DISCRETE_SCROLL_STEP.
To fix this situation, add DBL_EPSILON to the calculation step, when
checking for the discrete scroll event to ensure that 3 smooth scroll
events, with each having the value 3 1/3, emit a discrete scrolling
event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1727>
MetaVirtualInputDeviceX11 currently doesn't handle smooth scroll events
at all.
So, if a user of the remote desktop API uses smooth scroll events, then
only the wayland backend handles these events.
The user of the remote desktop API however, might not know which
backend is being used and actually the user should not even have to
care about it.
Actual smooth events cannot be emulated in the X11 events.
What can be done however is accumulating smooth events and then when
the accumulated steps surpass the DISCRETE_SCROLL_STEP value, emit a
discrete scroll event.
So, do exactly that, to make smooth scroll events work when the remote
desktop API is used with the x11 backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1727>
Given X11 nature, the pointer "leaves" the stage anytime it wanders into
a client window, or any other areas that are not deemed part of the
stage input region.
Yet we want to stay correct in those situations, e.g. have the clutter
side reasonably in sync, picking and highlighting to work properly, etc.
In order to achieve that, emulate motion events on XI_RawMotion. These
are as much throttled as our pointer tracking for a11y, in order to avoid
too many XIQueryPointer sync calls. This emulation only kicks in anytime
that X11 notifies us that we are not "on" the stage.
This replaces some sync_pointer() calls in GNOME Shell code that are
there just to compensate for this trait of X11, e.g. in the message tray
code.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1659>
Ensure we issue a motion event for the current pointer position,
as there might be situations where compositor modals get X grabs
from other clients stacked on top, or missed events in between
otherwise.
Ensure the Clutter state is still up-to-date afterwards here. This
replaces some sync_pointer() calls done in GNOME Shell code, always
done after modality changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1659>
Do these Wayland operations (that apply on both native and nested backends)
in the MetaCompositorServer subclass. We want to add more backend specific
behavior here in the future.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1659>
In the case that DnD is performed and succeeds, we want to release
the grab early, and let the transfer IPC happen in the back. For
that to happen without a hitch, drag source and offer must be left
related to each other after undoing the grab, even though the default
ungrabbing code does that automatically (indirectly, by unsetting the
drag focus).
In these cases, we used to manually unset the current source, so
this decoupling was skipped. Notably, one missed case is X11 DnD,
so we might end up with the situation there that DnD did succeed,
transfer is ongoing, but the source and offer are already decoupled,
this confused the machinery and missed the finishing XdndFinished
to be emitted to the X11 drag source.
The prior commits prepared for this source/offer decoupling being
a manual operation, this commit avoids doing this automatically
when ungrabbing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1720>
This object is just being detached, with no code unref'ing it. Do
this whenever the XDnD selection goes unowned, usually a good
indication that the drag source no longer is one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1720>
g_set_error_literal() asserts that the provided message is not NULL.
If it is NULL, the function is entirely no-op.
This resulted in a NULL dereference of the GError, which remained
NULL in this case, when trying to print a warning in
clutter_stage_cogl_redraw_view().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1715>
PipeWire recently introduced busy buffers, which actually fixes the last remaining
issue that blocked us from downgrading these cogl_framebuffer_finish() calls into
cogl_framebuffer_flush() ones.
Switch to cogl_framebuffer_flush() in all three stream sources.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1701>
When a transfer request is done to the MetaSelectionSourceRemote source,
it's translated to a SelectionTransfer signal, which the remote desktop
server is supposed to respond to with SelectionWrite.
A timeout (set to 15 seconds) is added to handle too long timeouts,
which cancels the transfer request.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1552>
Nothing is hooked up, it only does basic sanity checking i.e. whether
the clipboard was enabled when interacting with it. No actual clipboard
integration is hooked up yet.
This also syncs org.gnome.Mutter.RemoteDesktop.xml from
gnome-remote-desktop.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1552>
The original implementation of ::touch-mode tested for keyboard
presence to know whether the OSK and other touch-only features were
enabled.
However that didn't pan out, every webcam, card reader and kitchen
sink like to live a second life as EV_KEY devices. This made the
detection of actual external keyboards a much harder task than it
sounds, and was thus removed in commit f8e2234ce5.
Try a different approach here, and test for pointer devices, it
doesn't matter if internal or external devices, the rationales:
- It is significantly easier to get this right, there's virtually
no devices with abs/rel axes that don't try to be a real input
device of some sorts.
- It's not as good as testing for keyboard presence, but it's the
next best thing. These usually come in pairs, except in weird
setups.
- It is better than not having anything for a number of situations:
- Non-convertible laptops with a touchscreen will get touch-mode
disabled due to touchpad presence (plus keyboard). There's
been complains about OSK triggering with those.
- Same for desktop machines with USB touchscreens, the mouse
(and presumably keyboard) attached would make touch-mode
get in the middle.
- Convertible laptops with a broken tablet-mode switch get a
chance to work on tablet modes that do disable input devices
(e.g. detachable keyboards, or via firmware)
- Kiosk machines, tablets, and other devices that have a
touchscreen but will not regularly have a mouse/keyboard
will get the touch-mode enabled.
All in all, this seems to cover more situations the way we expect it,
there's only one situation that the OSK would show where it might
not be desirable, and one that might not show when it better should:
- Tablets and kiosk machines that get one keyboard plugged, but not a
mouse, will still show the OSK, despite being able to type right
away.
- Convertible laptops with broken/unreliable tablet-mode switch (e.g.
ignored by the kernel) rely entirely on the device/firmware
characteristics to work. If after folding into tablet mode the
touchpad remains active, touch-mode will not turn on.
Fixing the tablet-mode switch on these devices should be preferred,
as that'll also make libinput magically disable the touchpad.
The latter can be worked around with the a11y toggle. The former is
merely inconvenient, and nothing prevents the user from plugging a mouse
in addition.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1710>
Technically this is still wrong if the source actor or dnd actor are
transformed in other ways. However geometry scale is the by far most
common case and we currently lack convenience API in Clutter to
easily compute the right values.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1683>
When recording the screen and real time encoding it using a gstreamer
pipeline, that pipeline can stall when the encoder is too slow. Log a
debug message using the new SCREEN_CAST debug topic in that case so we
know when framedrops are happening.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1709>
Since commit c255031b6d, we allow some modifier+scroll events to
pass through to Clutter to enable gnome-shell to handle them. That
action shouldn't trigger a modifier-only action at the same time, so
reset the corresponding tracking just like we do for modifier+click.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1695>
Since commit c255031b6d we pass scroll-events through to
the compositor if the window_grab_modifiers are pressed;
in order to allow gnome-shell to check for those events,
expose the struct member as a MetaDisplay property.
Also take the opportunity to pick a more generic name, now
that the modifier is no longer used exclusively for mouse
clicks (unless we maintain the notion of scroll events as
button 4 and 5 "clicks").
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1695>
The other end of the PipeWire stream can set the buffer data type to a
bitmask of supported buffer types. We should respect this, and not
attempt to allocate a DMA buffer if it isn't asked for.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1697>
Instead of getters, pass the width, height and stride around when
relevant. This also removes the redudant "stream_size" and
"stream_height" variables from the src struct, as they are already part
of the video format.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1697>
Mutter freezes Xwayland commits when resizing windows, and thaw them in
the window actors' after_paint() for X11.
Yet, after_paint() could be never called, as when a new window is mapped
while the overview is active in gnome-shell.
As a result, the content of the X11 window will remain invisible to the
overview.
Add a new window actor API to tell whether commits can be frozen. For
Wayland window actors, this always return FALSE, whereas for X11 window
actors, it checks whether the Clutter actor is mapped.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1678>
When (un)maximizing, (un)fullscreening, the move/resize action is
flagged with 'ACTION_MOVE' and 'ACTION_RESIZE' , while e.g.
'appears-focus' does not.
When a client misbehaved and didn't immediately reply to a configure
request with a commit with the corresponding ack_configure, the
following commit would trigger a oddly timed move, making the window
appear to move back to a previous position.
Avoid this issue by only carrying over the target window position if the
configuration actually contained a new position.
We cannot only rely on the flags however, as e.g. a new position should
be respected during interactive resize, even though only 'ACTION_RESIZE'
is passed in such scenarios.
Do the same for the size, except if the window state dictates that the
size is fixed to a certain size, e.g. being fullscreen or maximized.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1445>
Mutter needs to fetch the X11 Window ID from the onscreen and did that
by using an X11 specific API on the CoglOnscreen, where the X11 type was
"expanded" (Window -> uint32_t). Change this by introducing an interface
called CoglX11Onscreen, implemented by both the Xlib and GLX onscreen
implementations, that keeps the right type (Window), while avoiding X11
specific API for CoglOnscreen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Instead of calling "init_onscreen()" on two different separate vtables
from the allocate() funtion, just have the CoglOnscreen sub types
themself implement allocate() and initialize in there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Thins means that e.g. MetaOnscreenNative now inherits CoglOnscreenEgl,
which inherits CoglOnscreen which inherits CoglFramebuffer, all being
the same GObject instance.
This makes it necessary to the one creating the onscreen to know what it
wants to create. For the X11 backend, the type of renderer (Xlib EGL or
GLX) determines the type, and for the native backend, it's currently
always MetaOnscreenNative.
The "winsys" vfunc entries related to onscreens hasn't been moved yet,
that will come later.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
To get meta-renderer-native.c down to a bit more managable size, and to
isolate "onscreen" functionality from other (at least partly), move out
the things related to CoglOnscreen to meta-onscreen-native.[ch].
A couple of structs are moved to a new shared header file, as
abstracting those types (e.g. (primary, secondary) render devices) will
be dealt with later.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The mutter naming convention for types and their instance variables is:
Type name:
[Namespace][BaseName][SubType]
Instance name:
[base_name]_[sub_type]
This means that e.g. CoglOnscreenGLX is renamed CoglOnscreenGlx, and
glx_onscreen is renamed onscreen_glx. This is in preparation for
GObjectification.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Makes sure that monitor specs which may be read from EDID data do not
contain characters that are invalid in XML. Makes it possible to restore
monitor configs of monitor models with characters such as '&' in them.
To make this change not break any tests, the sample monitor configs need
to be adjusted as well. Apostrophes don't strictly have to be escaped in
XML text elements. However, we now do escape the elements in
`<monitorspec>` specifically.
Closes: <https://gitlab.gnome.org/GNOME/mutter/-/issues/1011>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1685>
Previously the wl_resource and MetaWaylandGtkSurface corresponding to
any client gtk_surface have been kept around until the exit of the
client due to the client side destroy method not signaling the
destruction to the server. Ideally the protocol would have specified a
destroy request marked as destructor to handle this automatically,
however this is no longer possible due to the destroy method being
implicitly generated in the absence of an explicit request in the
protocol. Adding a destroy request marked as destructor now would
generate a new destroy method that unconditionally would send the
request to the server, which would break clients running on servers not
supporting that request.
So instead of modifying the destroy request add a new "release"
destructor, that indicates to the server that it can release the
resource. This can be optionally be used by clients depending on the
server protocol version.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1307>
The MetaWaylandSurface corresponding to a MetaWaylandGtkSurface can be
destroyed before the MetaWaylandGtkSurface is destroyed. In its destroy
function MetaWaylandSurface however was unsetting the destructor of the
correspnding resource along with the gtk_surface1 interface
implementation. This was done to prevent further gtk_surface1 requests
on a NULLed MetaWaylandSurface, if it has been destroyed before the
MetaWaylandGtkSurface.
It would be enough to just unset the resource implementation, while
keeping the destructor to fix this leak. However the following commit
will rely on the implementation being available after the
MetaWaylandSurface has been destroyed. So instead introduce NULL checks
for all functions that can be called on the gtk_surface1 interface and
do not unset the implementation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1307>
If the monitor configuration changed, even though the streamed monitor
didn't change, we'd still fail to continue streaming, as we failed to
update the stage watchers, meaning we wouldn't be notified about when
the stage views were painted.
Fix this by reattaching the stage watches, i.e. update the painted
signalling listeners to listen to the right views, when monitor changes
happens.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1691>
Make the API used more shared and better named.
meta_monitor_manager_on_hotplug() was renamed
meta_monitor_manager_reconfigure(), and meta_monitor_manager_reload()
was introduced to combine reading the current state and reconfiguring.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1689>
It was named "backend_native" and "backend" which is easily confused with
MetaBackendNative and MetaBackend which tends to have those names.
Prepare for introducing the usage of a MetaBackendNative and MetaBackend
pointers here by cleaning up the naming.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1689>
Fullscreen X11 windows that attempt to change the resolution on Wayland
use a surface viewport to achieve this without affecting the resolution
of the display. This however also means that pointer events will be
delivered in the display coordinates while the code handling the window
frame is not aware of any such viewport scaling. So a right click
outside of the area corresponding to the new resolution will not be
considered to be on the client area. And since the only area that is
ignored when determining whether to perform the right click action, such
as opening the context menu, is the client area, this will result in the
action being performed, despite happening on the (scaled) client area.
While it would be possible to scale the event coordinates so that
get_control() correctly determines the frame element the cursor is on,
viewport scaling only affects fullscreen windows. Since fullscreen
windows have no frame, we can always assume that if the window gets
delivered an event for a fullscreen window, it is on the client area
without doing any additional calculations.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1592
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1661>
We remove pending pings when unmanaging a window, but currently
don't prevent new pings to be scheduled after that.
The previous commit fixed a code path where this did indeed happen,
but as the result of gnome-shell trying to attach a Clutter actor
to a non-existent window actor is pretty bad, also guard can_ping()
against being called for an unmanaging window.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2467
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1676>
This seems to have been the default in the past, but was (accidentally?) modified
by 8adab0275.
For GNOME 40, we'll be returning to our root with horizontal workspaces, so instead
of overriding it in GNOME Shell side, change the default back to what it once was.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1684>
We'll have two persistent client connections alive for the whole test,
one X11 client, and one Wayland client. So in order to be able to set up
the async waiter, do so after setting up the X11 client, as after that
we know we'll have a MetaX11Display ready to use.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1681>
One for the public channel, and one for the private maintainance
channel. Use the public one for test clients, otherwise tests become
flaky, and the private one for MetaX11Display.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1681>
This adds a MetaKmsImplDevice backend using atomic drmMode* API in constrast to
non-atomic legacy drmMode* API used in MetaKmsImplDeviceSimple.
This has various behavioral differences worth noting, compared to the
simple backend:
* We can only commit once per CRTC per page flip.
This means that we can only update the cursor plane once. If a primary
plane composition missed a dead line, we cannot commit only a cursor
update that would be presented earlier.
* Partial success is not possible with the atomic backend.
Cursor planes may fail with the simple backend. This is not the case
with the atomic backend. This will instead later be handled using API
specific to the atomic backend, that will effectively translate into
TEST_ONLY commits.
For testing and debugging purposes, the environment variable
MUTTER_DEBUG_ENABLE_ATOMIC_KMS can be set to either 1 or 0 to
force-enable or force-disable atomic mode setting. Setting it to some
other value will cause mutter to abort().
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/548
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
In order to reliably manage the reference count of the user data passed
to page flip listeners - being the stage view - make the ownership of
this data travel through the different objects that take responsibility
of the next step.
Initially this is the MetaKmsPageFlipListener that belongs to a
MetaKmsUpdate.
When a page flip is successfully queued, the ownership is transferred to
a MetaKmsPageFlipClosure that is part of a MetaKmsPageFlipData. In the
simple impl device, the MetaKmsPageFlipData is passed to
drmModePageFlip(), then returned back via the DRM event. In the future
atomic impl device, the MetaKmsPageFlipData is stored in a table, then
retrieved when DRM event are handled.
When the DRM events are handled, the page flip listener's interface
callbacks are invoked, and after that, the user data is freed using the
passed GDestroyNotify function, in the main context, the same as where
the interface callbacks were called.
When a page flip fails, the ownership is also transferred to a
MetaKmsPageFlipClosure that is part of a MetaKmsPageFlipData. This page
flip data will be passed to the main context via a callback, where it
will discard the page flip, and free the user data using the provided
GDestroyNotify.
Note that this adds back a page flip listener type flag for telling the
KMS implementation whether to actively discard a page flip via the
interface, or just free the user data. Avoiding discarding via the
interface is needed for the direct scanout case, where we immediately
need to know the result in order to fall back to the composite pipeline
if the direct scanout failed. We do in fact also need active discard via
the interface paths, e.g. in the simple impl device when we're
asynchronously retrying a page flip, so replace the ad-hoc discard paths
in meta-renderer-native.c and replace them by not asking for no-discard
page flip error handling.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Suspending might have changed the CRTC configuration, turning some off,
some on, etc. We need to update our internal representation of this
state, so that we know how to reconfigure upon resuming, e.g. what CRTCs
to turn off again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Destroying an onscreen destroyes the gbm_surface, the gbm_bo's, and the
fb_id's. Doing this (drmModeRmFB() of the fb_id specifically), may on
some hw implicitly disable the CRTC of the plane that framebuffer was
assigned to. This would cause following atomic commit that attempts to
disable the CRTC to fail as disabling an already disabled CRTC is not
allowed.
It'd also mean we'd always disable the plane before having finished next
mode set, leaving it monitor content potentially empty when not really
necessary.
Solve this by keeping the CoglOnscreens (thus the gbm_surface, gbm_bo
and fb_id) alive until the following global mode set has completed, i.e.
the new state has been fully committed and applied.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This makes "power save" (i.e. when you make a monitor go into power save
mode, or make it come out of power save mode), a per device action when
turning on power saving (power save being set to 'off'), and implicitly
handled when turning off power saving (power save being set to 'on')
when doing a mode set.
This is needed as with atomic mode setting, the configuration of DPMS
(Display Power Management Signaling), is replaced by directly turning on
or off CRTCs, and via the CRTC drm properties. Thus in order to handle
both with a common API, make that API high level enough for both cases
being covered.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Before we received new gamma updates via D-Bus and posted the update to
KMS directly. This won't be possible with atomic KMS, since one can only
update the state of a CRTC once per cycle.
Thus, to handle this, when configured by D-Bus, only cache the value,
and mark it as invalid. The next frame, the native renderer will pick
up the newly cached gamma value and configure the CRTCs accordingly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
We cannot switch DPMS state to 'on' first, then mode set later, when
using atomic KMS. So when we're turning it on, just let the eventual
mode set handle DPMS too.
When switching DPMS to 'off', do it directly, synchronously, both by
setting the DPMS state and switching off CRTCs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Before each frame is maybe redrawn, push any new cursor KMS state to the
pending update. It'll then either be posted during the next page flip,
or when the same frame finishes, in case nothing was redrawn.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This makes it possible to post a symbolic page flip and frame callback,
meant to be used by immediate symbolic page flip reply when emulating
cursor plane changes using legacy drmMode* functions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
In constrast to notify_presented(), notify_ready() also returns the
state machine to the idle state, but without providing new frame
information, as no frame was actually presented.
This will happen for example with the simple KMS impl backend will do a
cursor movement, which will trigger a symbolic "page flip" reply in
order to emulate atomic KMS behavior. When this happen, we should just
try to reschedule again.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Don't mode set each CRTC in separate KMS updates, as reconfiguring one
CRTC might cause other CRTCs to be implicitly reset thus as well,
causing KMS return EBUSY if using atomic modesetting.
Prepare for this by compositing each CRTC first including adding steps
to the KMS update, but wait until all views has rendered at least once
before posting the initial update. After this each CRTC is posted
separately.
Using EGLStreams instead of normal page flipping seems to fail when
doing this though, so handle that the old way for the EGLStream case,
i.e. eglSwapBuffers() -> mode set with dumb buffer -> eglStream
"acquire" (resulting in page flip under the hood).
For this we also introduce a new error code so that we don't use client
buffers when doing mode sets, which could accidentally configure the
CRTC in a way that is incompatible with the primary plane buffers.
Do the same also when we're in power save mode, to only have one special
case path for this scenario in the regular swap-buffer path.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of setting the frame result in the most generic layer, have the
backends do it themselves. This is necessary to communicate that a
swap-buffer call didn't really succeed completely to present the swapped
buffer, e.g. errors from KMS.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This argument is intended to be used by clutter to be able to
communicate with the onscreen backend, that happens to be the native
backend. It will be used to pass a ClutterFrame pointer, where the
result of page flips, mode sets etc can be communicated whenever it is
available.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
ClutterFrame aims to carry information valid during dispatching a frame.
A frame may or may not include redrawing, but will always end with a
result.
A asynchronous page flip, for example, will result in a
CLUTTER_FRAME_RESULT_PENDING_PRESENTED, while a frame that only
dispatched events etc will result in CLUTTER_FRAME_RESULT_IDLE. Instead
of this being implicit, make the ClutterStageWindow implementation
handle this itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
The way drm events are handled depends on whether we're using atomic or
not. Lets move the handling to the implementation, so that later the
atomic backend can handle the event they it need to.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
If we reassign e.g. a cursor plane twice before it's updated, we need to
make sure the 'fb-unchanged' flag is correctly handled, so that if we
changed the fb first, then updated the assignment again only changing
the position, the new assignment should not be flagged with
fb-unchanged.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
When we e.g. try to post an direct client buffer scanout update, it
might arbitrarily fail; when this happen we still will want to post the
rest of the update when we try again after having composited the primary
plane. To do this, add a way to preserve the metadata of an update if it
failed, only dropping the failed plane assignments. This involves
unlocking a previously locked MetaKmsUpdate, so that e.g. a new primary
plane can be assigned.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Sealing is a one way operation, but in the next commit, the "seal" will
be broken, so to avoid missusing the "seal" terminology, rename related
methods and variables to use the term "lock" instead. E.g.
meta_update_is_sealed() is now meta_update_is_locked().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
If a modeset is pending, it's likely that the cursor update will not
work; thus, wait with updating the cursor so that it's applied together
with the mode set update.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Something might want to affect the next update that is going to be
posted, but without posting it immediately. For example, changing the
cursor might need to wait for mode setting. Make it possible to get
feedback from posting the update, in order to gracefully handle any
errors.
Note, the API for notifiying about results take out the result listener
from the update, and notifies them in an open coded for loop. The reason
for this is that in the next commit we'll sometimes reuse updates, and
we only want notify about the results once.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Page flipping shouldn't necessarily be an actively requested action, but
happen implicitly depending on the given state. Thus, change the "page
flip" update into adding listeners for page flip feedback instead.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This will later make it possible to pass cursor plane assignments,
together with a complete update including the primary plane, but not
failing the whole update if just processing the cursor plane failed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
If posting an update resulted in an immediate error, don't communicate
this failure using the page flip feedback callbacks, but directly as a
return value.
This makes it possible for the direct client buffer scanout path not to
pass around flags triggering this behavior, meaning we can handle such
direct scanouts better.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of a "post all pending updates", pass an update specific to a
single device. This gets rid of the awkward "combine feedback" function,
and makes it possible to queue updates to a multiple devices without
always posting them together.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Custom page flips are meant to allow using e.g. EGLStream API to
indirectly trigger page flip queueing, when the KMS API cannot be used
directly. This is really something that is specific to a device, so
instead of making part of the page flip API, make it a configuration of
the update itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Eventually the type of impl device will depend on the driver details, so
get that information before constructing the impl device. This commit
doesn't introduce any new usage of the details, it just prepares for
the future.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This commit consolidates DRM buffer management to the MetaDrmBuffer
types, where the base type handles the common functionality (such as
managing the framebuffer id using drmModeAdd*/RMFb()), and the sub types
their corresponding type specific behavior.
This means that drmModeAdd*/RmFB() handling is moved from meta-gpu-kms.c
to meta-drm-buffer.c; dumb buffer allocation/management from
meta-renderer-native.c.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
For now feedbacks from an update are combined, meaning we might lose
error information. The feedback API may have to be reconsidered and
redesigned when planes gets a more front seat position.
This means we need to avoid trying to post updates if we're in power
save mode, as it may be empty.
Note that this is an intermediate state during refactoring that aims to
introduce atomic mode setting support, and we'll stop combining
feedbacks completely in the future.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of a constructor method, use the type directly and handle error
reporting using GInitable.
The DRM capability setting is done before construction, as later it'll
determine what type of impl device should be constructed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of telling MetaKmsConnector fill a MetaKmsUpdate with connector
property changes, make the update itself aware of the changes, making
the impl side translate that to property changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of having MetaKmsPlaneAssignment carry a low level property
list, set the actual state change, and then have the implementation
translate that into the necessary property changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
With the aim at always using the property table to fetch and parse
property metadata, move IN_FORMATS handling to the property table, using
the newly introduced parse vfunc.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Values may need to be processed and parsed in custom ways; make this
possible via the property table infrastructure using a callback.
Will be used for e.g. parsing rotation and formats.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Instead of relatively verbosely going through the DRM properties finding
the properties we care about and saving their ID's, add a more
declarative way to fetch property metadata. This'll allow for fetching
more property IDs with relatively less code, which will be useful for
the atomic backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
This contains a copy of a drmModeModeInfo, describing a mode. It also
has an unused pointer to the impl device it is associated with. It'll
later be used to get a blob ID for the mode.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1488>
Current Xwayland has marked the command line option "-listen" as
deprecated in favor of "-listenfd".
Use the pkg-config variable "have_listenfd" (if available) from Xwayland
to determine if we should use that option, to avoid a deprecation
warning when spawning Xwayland.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1682>
Mutter listens to two display connections, one for regular X11 clients
and another one for the so called "managed services".
Once an available display number is found for the regular X11 clients,
mutter would then redo the work to find another available display number
for the managed services.
Yet, it does so starting from the same initial display, which is a waste
of time since it just tried all displays to find the first available
one, so all these, including the regular display it just took, are now
in use.
So instead of starting over from the beginning when looking for a
display available for the managed services, continue from the next
display immediately after the one we found precedently.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1680>
Some X11 servers may not always create a lock file, yet mutter uses the
lock file to find a possible display number and then tries to bind to
the socket corresponding to that display number.
If it fails to bind, it will simply bail out. As a result, if an X11
server is already listening on that display but hadn't created a lock
file, mutter won't be able to start Xwayland.
To avoid that possible issue, make mutter retry with another display
for a given number of tries when binding fails even though the display
was supposed to be available based on the lock file presence.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1604
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1669>
The function choose_xdisplay() calls open_display_sockets() which calls
ensure_x11_unix_dir().
We don't need to do that from within the loop though, as the directory
/tmp/.X11-unix is the same regardless of the display number.
Move the call to ensure_x11_unix_dir() from open_display_sockets() to
choose_xdisplay() prior to enter the display loop.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1669>
In case of failure to open the display sockets, we would not propagatre
the error which can cause a crash when trying to show the error message.
Properly propagate the error to avoid the crash.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1669>
In the shutdown paths we check with the X11 display whether there's
remaining clients. However this happens in paths that happen after
the MetaX11Display vanished in the case of Xwayland crash.
Since in that situation the clients are forcibly vanishing too,
skip the client check.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1677>
This means backend implementations can have more control of the order of
how things are destroyed. To be precise, this will, in the next commit,
allow us to destroy the logind integration after the clutter backend
thus the libinput owning seat, that uses the logind integration to
release input devices.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1670>
We can't post tasks to the input thread when cleaning up the
MetaSeatImpl, as that will make the GTask complain about adding
references to a to be purged object. Avoid this by adding an explicit
meta_seat_impl_destroy() function that handles the destruction of the
MetaSeatImpl properly.
This also does more of the cleanup in the input thread, as that is where
it was managed. Will likely not make a difference as before this
happened after tearing down the thread, but lets tear down things in the
thread they were managed for good measure.
This fixes the last log spew I see right now when terminating mutter.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1670>
Closing automatically Xwayland once all relevant X11 clients are gone is
inherently racy, if a new client comes along right at the time we're
killing Xwayland.
Fixing the possible race conditions between mutter, Xwayland and the X11
clients may take some time.
Meanwhile, make that an experimental feature "autoclose-xwayland".
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1673>
<super> is considered a system modifier, and applications cannot use it
for keyboard shortcuts or as button modifier. It doesn't seem too much
of a loss taking <super>+scroll-event away as well, so that it becomes
available to gnome-shell/extensions.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1674>
Currently, mutter checks for the presence of X11 windows to decide
whether or not Xwayland can be terminated, when Xwayland is started on
demand.
Unfortunately, not all X11 clients will map a window all the time, an
X11 client may keep the X11 connection opened after closing all its
windows. In that case, we may terminate Xwayland while there are some
X11 client connected still, and terminating Xwayland will also kill
those X11 clients.
To avoid that issue, check the X11 clients actually connected using the
XRes extension. The XRes extension provides the PID of the (local) X11
clients connected to the Xserver, so we need to match that against the
actual executable names, and compare with a list of known executables
that we can safely ignore, such as ibus-x11 or gsd-xsettings.
We also check against our own executable name, considering that the X11
window manager is also an X11 client connected to the Xserver.
Also, XRes returning the PID of local clients only is not a problem
considering that Xwayland does not listen to remote connections.
However, if the user spawns a client remotely on another system using
ssh tunneling (ssh -X), only clients which actually map a window will
be accounted for.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1537
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1671>
Changes in games between fullscreen and windowed modes may trigger
chaotic situations where the buffer and the frame size temporarily
disagree, producing rectangles with negative width/height. This is
usually followed by other updates that bring the pointer constraint
up to date.
This makes cairo panic and return an "error" empty region, which breaks
deeper down when using the region rectangles to apply the pointer
constraint.
If we hit this situation, ignore the frame rectangle, and just go with
the buffer rectangle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1655>
We didn't tear down the libinput objects in the right thread when
exiting, but did so after the input thread exited.
We also tried to destroy the libinput devices after the libinput context
was destroyed, which isn't allowed.
Fix these two issues by tearing down the libinput objects in a input
thread task that when done exits the input thread. This effectively
"flushes" the input thread tasks while destroying the libinput objects
just before the thread exits.
While it might fine to tear down libinput objects in an arbitrary (main
in this case) thread while making sure nothing pokes at it in parallel
(e.g. the input thread is gone), libinput is by definition single
threaded, and could theoretically make assumptions about this, and we
shouldn't cause any possible surprises here, so make sure to destroy it
all in the right thread.
This fixes an abort() on exit caused by an assert about invalid object
destruction in libinput.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1663>
The "seat" usually refers to the ClutterSeat (MetaSeatNative) object,
and "seat_impl" to the MetaSeatImpl object, but there were still a few
places where this wasn't adhered to so fix those.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1663>
When supported, this property allows the window system to apply a 3x3 color
correction matrix in order to transform colors from the window system's native
color space to the measured color space of a display device.
Query for this property and set the 'supports-color-transform' property in the
GetResource reply. Add support for the SetOutputCTM DBus method and plumb that
through to the server's CTM property.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1048>
Add a test case to check whether the stage views and frame clocks are
all correctly freed after working with timelines a bit and then
hotplugging and removing all monitors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1632>
Currently, the NotifyPointerAxis method always assumes that the scroll
source is CLUTTER_SCROLL_SOURCE_FINGER.
This is however not always true and in some cases a remote desktop
client needs to submit a PointerAxis event with a custom axis step.
This is for example the case with high resolution mouse wheels, where
the NotifyPointerAxisDiscrete method is unsuitable.
In such cases NotifyPointerAxis needs to be called, but with the
intention that the scroll source is still a mouse wheel.
To solve this situation, don't assume the scroll source always to be
CLUTTER_SCROLL_SOURCE_FINGER.
Instead, add further flag options to NotifyPointerAxis, which allow a
remote desktop client to choose the scroll source.
This way a remote desktop client can choose what scroll source is the
most suitable one for the current scroll event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1636>
The monitor texture is the final background image. It doesn't need to
have any alpha channel. Cross-fades (which is the process of rendering
*into* the monitor texture) still work just fine.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1665>
Unfortunately there's situations where we can't fully rely on only
crossing events here. One such situation is pointer visibility changes
due to touch interaction, or e.g. after closing the lid.
In these situations the pointer position stays the same, picks the
same actor, yet we want to see the right surface as the pointer focus
again in the wayland side.
This used to happen on the first motion event after the pointer
visibility change before commit ad3f2b0b86, use motion events again
for picking so we don't break these usecases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1657>
These events may be emitted for touchpoints (in which case they contain
an event sequence). Ignore those as they are not relevant for pointer
picking, and shouldn't influence its focus.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1657>
This signal may be left dangling when disconnecting a device, and be executed
later on if the device is connected again, and mapped to other output. Make it
sure the signal handler is disconnected when unplugging the device.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1657>
Just because of implementation details, this is only relevant to Wayland,
and is done via ::effects-completed handlers there. Ideally, Clutter should
notice by itself about effects starting, finishing, and affecting picking.
Doing this in generic code seems slightly cleaner in the interim.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1654>
In the wayland code we are in synchronization with the events that
the ClutterStage is managing at the moment. Asking the ClutterSeat for
the pointer position gets ahead of the current events, and may result
in imprecise coordinates sent in wl_pointer.enter.
To be in consistence with the motion events that might be already
queued, we should ask the stage for the last known coordinates.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1654>
To clear a pointer constraint, the Wayland backend passes a NULL
constraint to the native input backend.
The new async API however tries to reference/un-reference the given
object to use it while running in a separate task, which leads to a
warning from GLib trying to g_object_ref()/g_object_unref() a non
GObject pointer.
To avoid that issue, simply set the data only if the given constraints
pointer is not NULL.
Suggested-by: Carlos Garnacho <carlosg@gnome.org>
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1587
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1652>
find_focusable_ancestor() may pick an ancestor window which is not
mapped or hidden, and setting focus on that window will fail.
Be a tad more selective when looking for a focusable ancestor, to reduce
the chance of meta_window_focus() not focusing the happy chosen one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1643>
The function focus_default_window() optionally takes a MetaWindow
argument denoting a window that should not be focused.
That function calls focus_ancestor_or_top_window() which in turn
calls meta_window_focus() to pass focus to another window.
However meta_window_focus() gives no guarantee that the given window
will end up being the one focused, and can fail in various and creative
ways.
If that fails, we could possibly end up with the focus window being the
one to avoid, while the caller assumes focus was changed, going as far
as asserting that fact like meta_window_unmanage() does.
As a result, mutter may abort simply because meta_window_focus() failed
to set focus on the expected window.
To avoid that issue, check that the focus did not end up on the window
that we explicitly did not want, and if that's the case, simply fallback
to the default focus window.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/862
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1643>
As planned and prepared with the last commits, let ClutterStage take
care of tracking input devices and their respective actors. This means
we now can remove the old infrastructure for this from
ClutterInputDevice.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1633>
Power saving changes in laptop panels enable/disable the attached
touchscreen input device, this is an asynchronous operation that
may be happening while the device is disappearing.
In fact, closing the lid is such perfect storm where both things
happen around the same time.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1644>
Currently, the MetaInputDeviceNative owns the libinput_device, with the
small catch that it is eventually finished in the main thread (as the
CLUTTER_DEVICE_REMOVED event keeps the last reference to it).
Make it sure that the libinput_device is destroyed in the input thread,
before giving away the last extra input device references.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1639>
There was an attempt to remove an unnecessary inclusion of a header
file, but only got so far as compile testing after having commented out,
but didn't remove the comment before creating a commit. This commit
fixes that mistake.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1640>
Add a new ClutterPaintNode parameter to the paint_target() vfunc.
For now, create a temporary ClutterEffectNode that is passed to
paint_target() and immediately painted; next commits will move
this to upper layers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1355>
To find XWayland output that should be the primary one, iterate through all
XWayland outputs, and compare their geometry to the geometry of the primary
logical monitor.
To avoid possible race conditions (Mutter's monitor configuration already
updated, but Xrandr not yet), set the output both after Randr notifications and
after 'monitors-changed' signal.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1407
Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1558>
When we're running under a polyinstantiated SELinux environment, we'll
likely start with an isolated and empty /tmp, meannig no /tmp/.X11-unix
directory to add things to. To make it possible to still function in
this kind of setup, make sure said directory exists.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1626>
Instead of using native backend platform data specifically, store
this info in ClutterMotionEvent. This includes time in usec since
it's just used for motion events, in the future it could make sense
to make these general to all events again, but it could make sense
to make ClutterEvent structs private before.
In order to express that a motion event has relative motion info,
the CLUTTER_EVENT_FLAG_RELATIVE_MOTION event flag has been added
for it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1623>
We had code in both backends that sort of independently associated
sequences to slots. Make both transform slots to sequences the same
way, so they may share the implementation convert those back to slots.
This helper now lives in Clutter API.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1623>
We have this as platform-dependent data in the native backend, and
a bunch of fallback code done in place in the evcode users. Stop
making this platform-dependent data, and move it to the relevant
ClutterEvents.
The fallback code for the X11 backend case is about the same, but
now it is done directly by the X11 backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1623>
Making this an event is overly convoluted, accounting that we
emit the event, then convert it to a ClutterStage signal, then
its only consumer (a11y) sets the active ATK state.
Take the event out of the equation, unify activation/deactivation
of the stage in MetaStage, and use it from the X11 backend too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1623>
Ensure that color_ptr gets set, and avoid color_char usage too in
that case. Fixes:
../../../../Source/gnome/mutter/src/backends/native/meta-monitor-manager-kms.c: In function ‘meta_monitor_manager_kms_set_crtc_gamma’:
../../../../Source/gnome/mutter/src/backends/native/meta-monitor-manager-kms.c:370:7: warning: ‘color_char’ may be used uninitialized in this function [-Wmaybe-uninitialized]
370 | g_string_append_printf (string, " %c: ", color_char);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../../Source/gnome/mutter/src/backends/native/meta-monitor-manager-kms.c:351:12: note: ‘color_char’ was declared here
351 | char color_char;
| ^~~~~~~~~~
../../../../Source/gnome/mutter/src/backends/native/meta-monitor-manager-kms.c:391:36: warning: ‘color_ptr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
391 | (*color_ptr)[i]);
| ~^~~~~~~~~~~
../../../../Source/gnome/mutter/src/backends/native/meta-monitor-manager-kms.c:350:24: note: ‘color_ptr’ was declared here
350 | unsigned short **color_ptr;
| ^~~~~~~~~
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1624>
Assert that the region is created, thus we passed a valid enum value
to the get_scaled_region() function. Fixes:
../../../../Source/gnome/mutter/src/compositor/meta-surface-actor.c: In function ‘get_scaled_region’:
../../../../Source/gnome/mutter/src/compositor/meta-surface-actor.c:113:10: warning: ‘scaled_region’ may be used uninitialized in this function [-Wmaybe-uninitialized]
113 | return scaled_region;
| ^~~~~~~~~~~~~
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1624>
It was a test case in the Wayland test client directory, but it wasn't a
Wayland test client but a standalone test linking to libmutter. Since it
uses rlimit to implement certain aspects of the test, it can't be made
part of the regular unit tests, as that means any test running after
being stuck with the rlimit set, thus keep it standalone, but at least
run it as part of the test suite.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1557>
The XIOErrorExitHandler expects (Display *, void *) whereas mutter uses
(Display *, MetaX11Display *).
That causes a warning at build time:
warning: passing argument 2 of ‘XSetIOErrorExitHandler’ from
incompatible pointer type [-Wincompatible-pointer-types]
813 | XSetIOErrorExitHandler (xdisplay, x_io_error_exit, display);
Actually, the MetaX11Display is not even used, so we can just use the
expected API and ignore the value.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1621>
The stack and stack tracker tend to cause missed frames from time to
time, especially when there are many open windows. Add some
instrumentation to make it this easily verifiable when profiling.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1616>
While browsing sysprof profiling reports, I saw surface-commit taking
significant times sometimes; trace attach too, to see whether such
things are due to e.g. texture uploads.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1616>
Constantly manipulating the stack caused severe stalls (several seconds)
with many open windows when switching workspaces. The cause for this was
that each show/hide call dealt with the stack in isolation, meaning if
you hid N windows, we'd manipulate and synchronize the stack N times,
potentially doing synchronous calls to the X server while doing so.
Avoid the most severe stalls by freezing the stack while calculating
showing; this made the worst case go from several seconds to around
10-20 ms, which is still bad, but by far not as bad.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1616>
Figuring out the MetaSeatImpl this much indirectly is fairly awkward when
the keymap is only updated from the MetaSeatImpl, pass instead the seat
impl's xkb_state, as we have it handy in all the places this is called.
This will not break on NULL seats during initialization, should the numlock
state be restored from previous sessions.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1556
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1612>
The API allows for invalid barriers to be created; in an X11 session,
this could result in involutary early exit, so guard against those with
soft asserts. These will be logged in the journal as warnings, but will
avoid the crash unless compiled out.
Note that this doesn't fix the bug, it just makes it more detectable.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1901610
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1611>
Make it impossible to add individual includes of input thread objects.
This must go through meta-input-thread.h now, which should be enough
to make anyone think it twice.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
They're a dime a dozen. If it gets called exclusively from the
input thread, it got one. Hopefully these breadcrumbs will be
enough so people don't lose their way here.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
This (now) doesn't change anything in regards to the API that the UI
thread should access from the MetaSeatImpl. The MetaInputDeviceNative,
MetaInputSettings and MetaKeymap objects are now considered owned by
the input thread, as well as all of libinput objects.
The MetaEventSource now dispatches events in a GMainContext that is
the thread default to this thread, and all UI-thread-accessible API
(seat and virtual input device API) will be handled in a serialized
manner by that same input thread.
The MetaSeatImpl itself is still considered to be owned by the caller
thread, and all the signals that this object emits will be emitted in
the GMainContext that is default at the time of calling
meta_seat_impl_new().
The MetaInputSettings configuration changes will likewise be handled
in the input thread, close to libinput devices.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Instead of going through the event queue, stage handling code, and
back to the input device via a vmethod call, do this directly in the
MetaSeatImpl. This is not too different from X11, where everything
happens inside the backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
All that is left in the "public" struct is all state that ClutterStage
delegates on ClutterInputDevice. That should move somewhere else, but
not here, not now.
All private fields belong to construct-only properties, with only getter
API, and idempotent vmethods (except keyboard a11y, atm). This should
be enough to make ClutterInputDevice obviously thread safe, outside the
backend.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
This API is the one accessed from different bits of the UI thread,
make it "async" (it's basically one-way setters, so API stays the same
in the surface) and able to run in the MetaSeatImpl main context.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Simplify the handling of numlock state, so it can be entirely handled
within the input thread. Since the saving/restoring is triggered inside
each backend code, there's no need anymore for meta_backend_set_numlock().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Push it a little bit down to the MetaSeatNative. As both the UI thread
and the input thread are interested in dealing with the xkb_keymap and
it is not meant to be used in different threads, keep 2 separate copies
around.
The keyboard map will always be set from the UI thread, so the xkb_keymap
owned by the MetaSeatNative (owned by the UI thread) can be considered
canonical.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Don't let the vfuncs (meant to be called from the UI thread) deal with
xkb state itself. Instead store the current state in struct fields, which
is then fetched in vfuncs.
This makes the keymap able to be used from the UI thread, while being
maintained by the input thread. Same caveats apply than
clutter_seat_query_state(), you are asking for the most up-to-date state,
but it still may be changing under your feet.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Wrap all keyboard state updates, and all pointer/stylus/touch cursor
position with a write lock, and ::query_state() (The only entrypoint
to this state from other threads) with a read lock.
The principle is that query_state may be called from different threads
(UI so far, but maybe KMS too in the future), while the input thread
may (or may not) be updating it. This state is fetched "atomically"
(eg. x/y will be consistently old or new, if the input thread were
updating it at the same time).
There's other places deep in backends/native that read this state,
they all will run in the input thread, so they count as "other readers"
to the other thread. Those changes are already mutually exclusive with
updates, so they don't explicitly need the RW lock.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
While barriers will be added from the main thread, the native barrier
manager will sit close to the MetaSeatImpl in its own thread. Add the
necessary locking so that we can pass MetaBarrierImplNative from the
UI thread to the input thread, and ensure the MetaBarrier signals are
still emitted in the UI thread.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Depending on the backend, we want to integrate this object at different
levels. It will sit close to the MetaBackendX11/MetaSeatX11 in X11, but
it will be put deep down with MetaSeatImpl in the native backend, in a
separate thread.
Since we can't depend on a single object type, nor are able to track
ClutterSeat signals neatly, make this API something to be called
explicitly by backends.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
These changes will happen in the input event management code, so let them
be emitted via the MetaSeatImpl, as that's what we'll have neat access to.
The ClutterSeat signals are now emitted from there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Move most of the functional bits (those meant to run on a standalone
thread) to a MetaSeatImpl object. This object is managed by the MetaSeatImpl
and not exposed outside the friend MetaSeatNative/MetaInputDeviceNative/
MetaInputSettings classes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Banish MetaInputSettings from MetaBackend "public" API, it's now meant to
spend the rest of its days in the backend dungeons, maybe hanging
off a thread.
MetaInputMapper replaces all external uses.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Delegate on the MetaInputMapper all matching of inputs and outputs,
including configuration. Other secondary aspects, like output
aspect ratio for tablet letterbox mode, or toggling attached devices
with power saving changes, are also moved here.
This makes MetaInputSettings independent of MetaMonitorManager,
all interaction with it happens indirectly via public API entrypoints.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Rename the set_tablet_keep_aspect() vfunc into a set_tablet_aspect_ratio()
one that takes an aspect ratio double, instead of leaking monitor info
into subclasses to let them all figure out this number themselves.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
We have 2 sources (this one in MetaSeatNative, and the one in
MetaBackend) dispatching ClutterEvents to the stage. Make the
MetaSeatNative one exclusively about dispatching the libinput
queue, and leave ClutterEvents to the other.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
This will resort to SW rendering if this cursor renderer does not
own the MetaKmsCursorRenderer, so it's pretty much equivalent thus
far, except we may now implement logic to flip the kms cursor renderer
around.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
We actually have a set_send_events() vfunc that can enable or disable
devices at the libinput and X11 input driver level, so use that. A
positive side effect is that those layers will leave the device at
a consistent idle state (as opposed to going mute maybe amid user
input).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
We are aiming for a split of HW and SW cursor rendering management.
Given the HW plane is a limited resource and the amount of cursor
renderers may be >1 (due to tablets, even though we currently use an
always-software cursor renderer there), it would ideally be able to
switch between renderers.
Being MetaCursorRenderer not really a singleton, having cursor
inhibitor accounting here doesn't pan out. Make it MetaBackend API
so all cursor renderers get the same picture.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
These use now more of a "pull" model, where they receive update
notifications and the relevant input position is queried, instead
of the coordinates being passed along.
This allows to treat cursor renderers all the same independently
of the device they track. This notifying of position changes should
ideally be more backend-y than core-y, a better location will be
figured out in future commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Instead of letting the wayland bits maintain an always-software
cursor renderer, let the cursor renderer be managed by the backend,
and only hook to it (as we do for pointer cursor) in the wayland
bits.
ATM, make the cursor renderer still always-software, although
ideally we should allow moving the HW cursor management between
renderers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Different devices may get standalone cursor renderers, add this API
to adapt slowly to this. The meta_backend_get_cursor_renderer() call
still exists, but shortcuts to the mouse pointer's renderer (as it
actually did before).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Use a new set in MetaInputDeviceNative, this coexists with
ClutterInputDevice coords for the time being. This API will
eventually be only accessed from the input thread.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
While multiple built-in panels isn't actually supported in any
meaningful manner, if we would ever end up with such a situation, e.g.
due to kernel bugs[0], we shouldn't crash when trying to set an
'external only' without any external monitors.
While we could handle this with more degraded functionality (e.g. don't
support the 'switch' method of monitor configuration at all), handle it
by simply not trying to switch to external-only when there are no,
according to the kernel, external monitors available. This would e.g.
still allow betwene 'mirror-all', and 'linear' switches.
The crash itself was disguised as an arbitrary X11 BadValue error, due
to mutter trying to resize the root window to 0x0, as the monitor
configuration that was applied consisted of zero logical monitors, thus
was effectively empty.
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1896904
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1899260
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1607>
xkb recently gained support for user-specified keymaps, which means we
can no longer assume that the configuration data is necessarily fully
complete or correct; and the configuration language is quite a labyrinth,
so it's easy to get wrong. If setting the keymap fails, leave it in
whatever state it previously had, since that seems preferable to crashing
with a NULL pointer dereference.
Resolves: https://gitlab.gnome.org/GNOME/mutter/-/issues/1555
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1605>
In case we only have a single view (or there's only one view left to
check and the actor is visible on previous views) we can take a short-
cut, saving a region allocation and some calculations.
While on it, declare float numbers in '.f' style to make them more
recognizable.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1596>
Commit 03c69ed8 ("Do not go past size hints on resize") was meant to
ensure the size hints set by the client would be honored during resize,
as going past those values could cause the window to move on resize.
However, it did so by calling ensure_size_hints_satisfied() which works
with the frame rect rather than the client rect. As a result, the
minimum size enforced would end up being larger than expected with
client-side decorations.
Use meta_window_maybe_apply_size_hints() instead which automatically
adjusts for client size.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1542
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1594>
Since we schedule frames for each stage view seperately now, surfaces receive
frame callbacks for each stage view they are visible on.
Only emit frame callbacks for the primary stage view.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1468>
Our main use case of `is_obscured()` is frame callback emission.
Since we now support stage views running at differt speeds, we
need to know whether an actor is visible on a specific stage view
in order to schedule frame callbacks accordingly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1468>
Commit e28c1ab4 added a hints_have_changed() function to only
recalculate windows features when the WM_NORMAL_HINTS change.
That function hints_have_changed() however was merely checking whether
the various XSizeHints flags where flipped, which is not sufficient
because the hints may remain the same while the actual values are
changed.
Not checking for the actual value differences would prevent some windows
from being able to switch fullscreen.
Improve the helper function hints_have_changed() to check not only for
flags being flipped, but also for the values being changed for each
relevant XSizeHints flags being set currently.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1534
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1566>
Sometimes the automatically selected primary GPU isn't suitable with no
way to make an well educated guess to do it better. To make it possible
for the user to override the automatically calculated default, make it
possible to override it using a udev rule.
E.g. to select /dev/dri/card1 as the primary GPU, add a file e.g.
/usr/lib/udev/rules.d/61-mutter-primary-gpu.rules (path my vary
depending on distribution) containing the fellowing line:
ENV{DEVNAME}=="/dev/dri/card1", TAG+="mutter-device-preferred-primary"
Reboot or manual triggering of udev rules to make it take effect may be
required.
Related: https://gitlab.gnome.org/GNOME/mutter/merge_requests/1057https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1562
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1562>
Instead of aborting with an error, display a half transparent gray
square instead of cursors and log a warning in the journal, allowing the
user to fix their system withotu having to rely on switching to a TTY.
It will be immediately obvious the cursor is silly looking, which will
be a better hint than just aborting.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1428
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1563>
It'd happen that the test runner would get CPU starved, and not see the
frame-clock changed notification before the timeline stopped. Decrease
the risk for this by moving the initial position of the actor having its
position transitioned to be closer to the view edge. This means the
frame clock will be changed earlier, increasing the chance of the
timeline not stopping before the relayout happens.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1555
For X11 grabs, the pattern matching mechanism would simply ignore
applications which have neither WM_CLASS nor WM_NAME set.
When dealing with an override redirect window however, it is not
uncommon that these window have neither value set as these window are
supposed to be ignored by the window manager.
When the WM_CLASS or the WM_NAME is not set by the client, assume the
value is empty so the pattern matching can allow for these.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1249
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1254>
Monitor tile info is possible to fetch when RANDR version 15 is exposed
by the X11 server. We had inverted the check meaning that only if older
versions were advertised would we attempt to init the tile information.
Fix this guard, thus fix monitor tiling on X11.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1524
Not calling libinput dispatch in the backend constructor defeats the
logic in post init as the device added events have not been processed
yet.
So instead of trying to guess the cursor initial visibility, simply
update it along when devices get added.
Additional benefit, we do not need to walk the all device list looking
for touchscreens anymore, we just need to check the device being added
since the current logic is to hide the cursor as soon as a touchscreen
is found.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1534
At startup, libinput dispatch is called from the MetaSeatNative
constructed callback.
That means that we may get libinput events even before the default seat
is set.
In turn, processing those events may trigger the use the default seat
while it's still not set yet, and cause a crash of gnome-shell/mutter
at startup.
A simple reproducer for this is to start gnome-shell/mutter with a
tablet connected and the stylus in proximity, the proximity event will
cause gnome-shell/mutter to crash at startup.
To avoid that issue, avoid dispatching libinput events early from the
MetaSeatNative constructed callback, those events will eventually get
processed when the seat and the backend are all setup.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1501https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1534
Commit 8bdd2aa7 would offset the window position by the difference
between the configured window size and the committed size from the
client to prevent the window from drifting while resizing.
This, however, did not take into account the actual geometry scale, so
when using any scale greater than 1, the window would rapidly drift away
due to that offset.
In order to solve this, we need to make sure we store away the pending
window configuration in the stage coordinate space, in order to not
loose precision. When we then calculate the offset given the result from
the client, it'll use the right scalars, while before, one scalar was in
surface coordinates, while the other in stage coordinates.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1490
We want the bounding box so `ceilf` seems more appropriate. It was
only written using `roundf` before as a workaround for inaccuracies
coming out of `clutter_actor_get_transformed_size` that would have
tricked `ceilf` into landing on the wrong integer. But that's since
been fixed by 67cc60cbda so we can use `ceilf` now.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1532
Otherwise we might run into a use-after-free and crash on (virtual)
device removal:
Invalid read of size 8
at clutter_input_device_get_device_type (clutter-input-device.c:811)
by update_last_device (meta-backend.c:1282)
by g_main_dispatch (gmain.c:3325)
by g_main_context_dispatch (gmain.c:4016)
by g_main_context_iterate.constprop.0 (gmain.c:4092)
by g_main_loop_run (gmain.c:4290)
by meta_run_main_loop (main.c:708)
by meta_run (main.c:723)
by main (main.c:550)
Address is 32 bytes inside a block of size 504 free'd
at free (vg_replace_malloc.c:538)
by g_type_free_instance (gtype.c:1939)
by clutter_event_free (clutter-event.c:1420)
by _clutter_stage_process_queued_events (clutter-stage.c:830)
by handle_frame_clock_before_frame (clutter-stage-view.c:1064)
by clutter_frame_clock_dispatch (clutter-frame-clock.c:405)
by frame_clock_source_dispatch (clutter-frame-clock.c:456)
by g_main_dispatch (gmain.c:3325)
by g_main_context_dispatch (gmain.c:4016)
by g_main_context_iterate.constprop.0 (gmain.c:4092)
by g_main_loop_run (gmain.c:4290)
by meta_run_main_loop (main.c:708)
by meta_run (main.c:723)
Block was alloc'd at
at malloc (vg_replace_malloc.c:307)
by g_malloc (gmem.c:106)
by g_slice_alloc (gslice.c:1025)
by g_slice_alloc0 (gslice.c:1051)
by g_type_create_instance (gtype.c:1839)
by g_object_new_internal (gobject.c:1939)
by g_object_new_valist (gobject.c:2264)
by g_object_new (gobject.c:1782)
by meta_input_device_native_new_virtual (meta-input-device-native.c:1365)
by meta_virtual_input_device_native_constructed (meta-virtual-input-device-native.c:705)
by g_object_new_internal (gobject.c:1979)
by g_object_new_valist (gobject.c:2264)
Suggested-by: Carlos Garnacho <carlosg@gnome.org>
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1529
Because clones may not have identical geometry to their source actors.
So we can't use the geometry of the source actor to decide to take the
more optimized (more clipped) path.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1480
The "paint" signal of ClutterActor is deprecated and will be removed. We
have a good replacement to get notified about stage paints nowadays,
that is "after-paint" on ClutterStage, so switch to that signal where it
makes sense.
I didn't bother to update the few tests (namely Clutters
conform/texture-fbo.c, conform/text-cache.c,
interactive/test-cogl-multitexture.c and Cogls
conform/test-multitexture.c, conform/test-texture-mipmaps.c) where it's
harder to replace the signal since we don't build those anyway.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1522
The paint-wrapper test wraps around the painting process of an actor to
paint its own texture before and after painting, it does that using the
"paint" signal.
This signal is deprecated and will be removed from Clutter, and since
this "use-case" won't be supported anymore afterwards (the proper way is
to use a ClutterEffect for things like this), remove the test.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1522
Rely on the seat stage, or other ways to fetch it. Also rely that
there is actually a single stage, so that we assign the right stage
to all events going out of the seat, in a single place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
This is a bit scattered around, with the setter/getter in Clutter, and
it only being only directly honored in Wayland (it goes straight through
device properties in X11).
Make this private native API, and out of public ClutterInputDevice API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
Make the upper part agnostic about the device being relative in order
to avoid applying keep-aspect. The X11 bits already are, so make it
sure it's also the case for the native backend.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
The semantics for libinput events are not as expected here. Besides
it's pointless, as those should arrive per-slot in a burst, and we
cancel on the first event.
We can simply use the Clutter event for this.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
As it does seem from a read to libinput code, TOUCH_CANCEL events
actually do contain slot information, and are emitted per-slot.
This means we can avoid iterating over the slots ourselves, they
are still expected to be sent altogether.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
We want to coalesce multiple touch events into the same wl_touch.frame
event. Instead of poking internals to peek the touch events (and their
slots) coming at us before we handle them, simplify things by queueing
the event at a slightly lower priority than events, so we are ensured
to handle all pending input events before sending the event.
If there's no pending events, we can just send the frame event. As it
doesn't make sense to hold any longer.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
When malformed modes are provided and no valid mode spec is found, mutter
will eventually try to access the last element of an empty list. Warn about
this and exit properly.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1481
We will use a dedicated variable when transitioning to/from fullscreen state
and leave the previously used 'saved_rect' exclusively for transitioning
between floating and maximized state.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/801
Implements the "prior window window geometry dimensions" as described in
the documentation of 'xdg_toplevel' request 'unset_maximized':
"If available and applicable, the compositor will include the window
geometry dimensions the window had prior to being maximized in the
configure event."
and 'unset_fullscreen':
"The compositor may include the previous window geometry dimensions in
the configure event, if applicable."
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/792.
If this call is available, we can turn libX11 IO errors (fatal by definition)
into something we can recover from. Try to dispose all X11 resources and close
the display instead, so the compositor can survive the event.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1447
If the MetaX11Display abruptly closed when X11 windows were present,
we would still try to deal with them while freezing/thawing for the
"fade out" animation.
At the bottom of that, the X server may be gone, just try to cope
with it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1447
We're going to enforce some invariants a bit stricter and will only
allow allocating if an actor is mapped, not only visible.
Since actors are only mapped if their parent is mapped and stages are
hidden by default, we need to show the stage to ensure the actors are
mapped before we allocate them. So do that and call clutter_actor_show()
on the stage before fake-allocating the test actors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Bug 448183 fixed an issue with _NET_WM_MOVERESIZE_WINDOW not moving a
window by basing the resize on the current (new) rectangle instead of
the original rectangle.
While this fixes the issue with _NET_WM_MOVERESIZE_WINDOW, this also
causes windows with a size increment to move when the resize also
implies a move, such windows might drift while resizing.
Make sure to use the current rectangle for non-interactive resizes only.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/543
The XSizeHints set by X11 clients give a hint to the window manager
about size increment, aspect ratio, base, minimum and maximum size, etc.
When an X11 client changes those values, there is a good chance that it
will affect the actual window size in some way, and mutter rightfully
queue a window resize in that case.
However, mutter does not check if any of the hints have actually changed
and unconditionally queue a window resize whenever a client changes its
WM_NORMAL_HINTS property.
That can be a problem when a zealous client such as xterm decides to
update its WM_NORMAL_HINTS property on resize, because in return mutter
will queue a non-user driven resize in the middle of user-driven events,
hence defeating the purpose of the META_MOVE_RESIZE_USER_ACTION flag.
To avoid that issue, make mutter a bit smarter and avoid queuing a
window resize if the XSizeHints haven't actually changed.
https://gitlab.gnome.org/GNOME/mutter/-/issues/543
On interactive resize, mutter calculates the difference in size based on
the pointer location and relies on window constraints to ensure the
minimum size is honored.
Wayland however does asynchronous window configuration, meaning that not
checking for size hints early enough may lead to the window moving as
the locations was initially computed on a size which will be invalidate
by the client eventually.
Make sure to respect the client size hint on update_resize() so that we
don't end up with a window moving unexpectedly when the client
eventually acked the configuration.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1495
Many tablets have a native portrait mode panel, yet come with a keyboard dock,
where the device gets docked in landscape mode. To avoid the display being
on its side when mutter starts while the tablet is docked, we need to take
the accelerometer reported orientation into account even if there is a
tablet-mode-switch which indicates that the device is NOT in tablet-mode
(because it is docked).
Add special handling for the first time the "orientation-changed"
signal gets signalled by the orientation-manager, which happens after it
has successfully claimed the accelerometer with iio-sensor-proxy.
The added special handling of the initial "orientation-changed" signal
does a number of checks:
1. panel_orientation_managed is false because of the tablet-mode-switch and not
because of other reasons.
2. The device has a native portrait mode panel (and thus likely needs rotation
to display the image the right way up when docked).
If all these checks succeed then it continues with creating a new
monitors-config based on the orientation ignoring the panel_orientation_managed
value (for the initial/first "orientation-changed" signal only).
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
The orientation reported by the orientation_manager may have changed while
panel_orientation_managed was false. So when panel_orientation_managed
changes to true we should re-check the orientation.
This fixes the orientation not being correct when e.g. taking a 360 degree
hinges 2-in-1 in clamshell mode (so landscape orientation) and then folding
it into tablet mode while holding it in portrait orientation.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
Add support for the (mostly theoretical) case of an input-device
offering tablet-mode-switch functionality being unplugged.
This makes the has_tablet_switch handling identical to the has_touchscreen
handling, leading to more consistent code.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
Detect if a tablet-mode-switch device is already present when mutter
starts by checking for this from meta_seat_native_constructed. This
mirrors how we also set has_touchscreen from meta_seat_native_constructed.
This fixes tablet-mode-switches only being recognized when they are added
at runtime.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
Unconditionally setting has_touchscreen to check_touch_mode
when a new device gets added leads to has_touchscreen becoming
false when during runtime e.g. an USB keyboard gets plugged in.
Fix this by setting has_touchscreen to TRUE when check_touch_mode
is TRUE and leaving it alone otherwise.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
A first step towards abandoning the CoglObject type system: convert
CoglFramebuffer, CoglOffscreen and CoglOnscreen into GObjects.
CoglFramebuffer is turned into an abstract GObject, while the two others
are currently final. The "winsys" and "platform" are still sprinkled
'void *' in the the non-abstract type instances however.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1496
The spec states:
```
A sub-surface becomes mapped, when a non-NULL wl_buffer is applied
and the parent surface is mapped. The order of which one happens
first is irrelevant. A sub-surface is hidden if the parent becomes hidden,
or if a NULL wl_buffer is applied. These rules apply recursively
through the tree of surfaces.
```
In the past we relied on Clutter actor behaviour to realize the recursive
part - which then broke in
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/664
when we changed the actor hierachy in regards to subsurfaces.
Explicitly encode the desired behaviour in `MetaWaylandSubsurface`, fixing
the issue and making it future proof.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1384
Aligning windows manually with other windows has become less important
since the advent of tiling. This decreases the usefulness of edge
resistance, which in fact many users perceive as lag nowadays.
Account for that by limiting resistance to screen and monitor edges by
default, and only include windows when the control key is pressed.
https://bugzilla.gnome.org/show_bug.cgi?id=679609
Commit 033f0d11bf added a fallback in case the tile monitor wasn't
set before, but didn't actually check for a previously set value.
As a result, the "fallback" is not set unconditionally, which may
differ from the expected monitor: The tile monitor is determined
by the pointer position, while the window's monitor is the one
where the biggest part of the window resides on.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1389
It's pointless to call into functions that produce information that will
end up nowhere, so lets not. This will generate less angst when doing
more intense data gathering and string generation in debug log calls.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1467
The timestamp sent with _NET_WM_FRAME_DRAWN should be in "high
resolution X server timestamps", meaning they should have the same scope
as the built in X11 32 bit unsigned integer timestamps, i.e. overflow at
the same time.
This was not done correctly when mutter had determined the X server used
the monotonic clock, where it'd just forward the monotonic clock,
confusing any client using _NET_WM_FRAME_DRAWN and friends.
Fix this by 1) splitting the timestamp conversiot into an X11 case and a
display server case, where the display server case simply clamps the
monotonic clock, as it is assumed Xwayland is always usign the monotonic
clock, and 2) if we're a X11 compositing manager, if the X server is
using the monotonic clock, apply the same semantics as the display
server case and always just clamp, or if not, calculate the offset every
10 seconds, and offset the monotonic clock timestamp with the calculated
X server timestamp offset.
This fixes an issue that would occur if mutter (or rather GNOME Shell)
would have been started before a X11 timestamp overflow, after the
overflow happened. In this case, GTK3 clients would get unclamped
timestamps, and get very confused, resulting in frames queued several
weeks into the future.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1494
Mutter sends a proximity-in event before the required tablet tool
resource is properly allocated on the client. This is violating the
Wayland protocol. Because libwayland ignores events for objects it
doesn't know yet, this is not noticeable in most applications. However,
if https://gitlab.freedesktop.org/wayland/wayland/-/issues/176 gets
fixed, these applications would likely crash immediately. Therefore this
PR removes the responsible code which, again, shouldn't have any effect
on client applications as they ignore this event anyway.
Relevant part of the spec:
This event can be received when the tool has moved from one surface to
another, or when the tool has come back into proximity above the
surface.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1427
When we resize a window we send it configure requests with size
suggestion. Some clients, e.g. gnome-terminal will limit its size to a
discrete set given the font size resulting in the size often not being
respected completely, but used as a hint to find a size as large as
possible but not larger than the configured size.
When doing an interactive resize dragging the right or top side of a
window, this caused issues with the configured window size not matching
the one used by the client, as the configured position wouldn't be
correct for the actual size. Fix this by offsetting the position given
the size mismatch offset, making the position again in sync with the
size.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1447https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1477
Mutter still relies heavily on singletons such as its MetaBackend.
For that, the backend implementation has a meta_init_backend() function
which is called at startup from meta_init(), which creates the desired
backend and sets the singleton which is returned by meta_get_backend().
Unfortunately, that means that the backend is never actually freed, and
all the code from the backend finalize function never actually get
called.
Add a meta_release_backend() to free the backend singleton.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1438
The input settings constructor installs callback functions on device
added/remove and tool-changed.
However, on dispose, those signals are not disconnected, meaning that on
teardown, once the devices get removed eventually, the callback will
still fire and call the callback with freed data, causing a crash.
Make sure we clear the signals on devices on dispose, to avoid the crash
on teardown.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1438
A boring one, with the exception that row and column needed to be
swapped. For the sake of consistency, the variable names were also
synchronized with the values they hold, so e.g. xy → yx, etc.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
CoglMatrix already is a typedef to graphene_matrix_t. This commit
simply drops the CoglMatrix type, and align parameters. There is
no functional change here, it's simply a find-and-replace commit.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
Ideally, we would use Graphene to do that, however as of now Graphene
lacks these APIs so we still need these helpers. Since we're preparing
to get rid of CoglMatrix, move them to a separate file, and rename them
with the 'cogl_graphene' prefix.
Since I'm already touching the world with this change, I'm also renaming
cogl_matrix_transform_point() to cogl_graphene_matrix_project_point(),
as per XXX comment, to make it consistent with the transform/projection
semantics in place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
During seat initialization, we process early libinput events (adding all known
devices) before the seat gets a stage assigned. This causes warnings when trying
to handle the corresponding CLUTTER_DEVICE_ADDED events, as they are sent
stageless.
As it is definitely too soon to have those events sent meaningfully, filter
those events out and instead handle the CLUTTER_DEVICE_ADDED emission for all
known devices after the seat receives an stage. This makes the events guaranteed
to be emitted early in initialization, but not so soon that they can't be
handled yet.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1472
Mutter itself is versioned now, so passing the version information
to the plugin is redunant now: The version is already determined by
linking to a particular API version (gnome-shell) or by installing
to a versioned plugin path (external plugins).
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1473
A Meta.WaylandClient() object has a GSubprocessLauncher object
passed externally. Currently this object is kept while the
WaylandClient object exists, but is is only needed until the call
to spawn is made.
This patch frees that GSubprocessLauncher just after that call,
thus freeing those resources.
Fix https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1462
This reverts the commits 372d73e275 and 1d20045247 - the special
case for alpha-less textures could only happen on Wayland, but now
the opaque region is also set in those cases.
This commit saves us some allocations, simplifies the logic a bit and
makes sure culling uses the same opaque region as our painting paths.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1463
Wayland clients using buffers without alpha channel are not expected to
set an opaque region. However, we rely on the opaque region for the fast
painting path in `MetaShapedTexture`.
Thus, make sure to always set an opaque region internally in those cases.
For X11 clients, wo do so already.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1463
Just like we used to before 30809665d8.
Because in some cases `clip_region` is able to shave off an extra pixel
from the edge of the redraw rectangle(s). And not shaving that off was
making the background rendering inconsistent with shaped-texture, causing
occasional off-by-one artefacts. Now both shaped-texture and
background-content agree on the clip region again that doesn't happen.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1443https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1464
This is essentially a revert of
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/326. This commit
had the unintended side effect that the built sources are actually
rebuilt for every individual user of libmutter_dep. With there being more
tests and generated files, the number of targets to build is increasing
squarely.
Not doing this reduces the number of targets from 2044 to 874, thus
saving man hours and CI burnt cycles in the long run. There's the slight
risk of reintroducing the random build breaks, but mutter is essentially
doing as suggested at https://github.com/mesonbuild/meson/issues/1084
(the only difference being addressed in the previous commit), so meson
ought to behave as expected.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1458
We only update the last device from actual input interaction here,
avoid this pair of events. This is specially nasty with
CLUTTER_DEVICE_REMOVED, since the device we're notifying upon will be
disposed soon after emission.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1460
Like it's done for the pointer in other places. Without a stage assigned,
some bits (like IM handling) may end up with events ignored, and misbehave.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1413
The Meta.WaylandClient constructor receives a GSubprocessLauncher
as a parameter, and stores it internally. Unfortunately, its
refcount value isn't increased, which results in the object being
released twice.
This patch fixes this bug.
Fix https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1454
When a MetaBarrier is first created it allocates a backend
impl object which does the actual heavy lifting.
Unfortunately, that backend object is never freed.
This commit ensures the implementation gets freed when
the barrier object is freed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1451
meta_barrier_destroy is responsible for removing the extra
reference added in meta_barrier_constructed.
Unfortunately, it fails to do this because of a misplaced early
return statement.
This commit removes the spurious return.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1449
This is already taken care of in meta_backend_monitors_changed(), called
from the same code paths that emit ::monitors-changed-internal. It is
better to leave this up to backend internals.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1448
We only did this if we weren't currently doing an interactive resize,
but since the finish_move_resize() is not the actual interactive resize
but the acknowledgment of the configure event that was emitted as a
result, we shouldn't limit ourself to the same flags used during resize.
This fixes temporarly "stuck" position of attached modal dialogs while
they are being resized.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1163https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1446
In X, buttons 1, 2, 3 are left, middle, right. In evdev, the order is
BTN_LEFT, BTN_RIGHT, BTN_MIDDLE. So setting a scroll button to 2 gave us a
middle button in the X session and a right button in a wayland session.
Fix that by hard-coding the LMR buttons handling.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1433
Even when a direct client buffer has a compatible format, stride and
modifier for direct scanout, drmModePageFlip() may still fail sometimes.
From testing, it has been observed that it may seemingly randomly fail
with ENOSPC, where all subsequent attempts later on the same CRTC
failing with EBUSY.
Handle this by falling back to flipping after having composited a full
frame again.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1410
If there is no laptop panel (for example on a desktop PC or a virtual
machine), attempting to put a NULL monitor in the list of matches
will just make mapping_helper_apply() crash.
Mitigates: https://gitlab.gnome.org/GNOME/mutter/-/issues/1414
Signed-off-by: Simon McVittie <smcv@debian.org>
It's enabled by default when using the i915 driver, but disabled
everywhere else until it can be made reliably an improvement. Until
then, for anyone want to force-enable it, add the string
'dma-buf-screen-sharing' to the experimental features list in GSettings.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1442
Seems DMA buffer based interprocess buffer sharing is more broken than
not, so for now only enable it when using the i915 driver.
For example vmwgfx, qxl and radeon, it results in mmap() failing to mmap the
memory region. Other drivers, e.g. amdgpu will function, but may hit
very slow memory download paths, resulting in worse performance.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1442
We only want the panel autorotation to happen if the laptop has an
accelerometer, and is in tablet mode. Regular laptop mode should
lock the orientation, and let it be configured manually.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1311
So far, we've expected this signal to not happen whenever autorotation
shouldn't apply (no accelerometer is a strong reason). In future commits
we'll add further checks to this policy, so prevent autorotation to
change the display configuration if the MetaOrientationManager signal
happens but it should be ignored.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1311
Instead of having everyone check net.hadess.SensorProxy themselves, have
this all controlled by the MetaOrientationManager, and proxied everywhere
else via a readonly property in org.gnome.Mutter.DisplayConfig.
We want to attach more complex policies here, and it seems better to
centralize the handling of the autorotation feature rather than
implementing policy changes all over the place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1311
We used to pick the "best" output for each builtin/size/edid categories,
and then pick the "best" (in that order) of those for each input device.
This is most often enough, but is prone to wrong results in some corner
cases (eg. 2 outputs with the exact same dimensions).
Change this to a score mechanism that doesn't leave outputs out. The
weights are the same, but the score is accumulated if an output matches
multiple categories. All outputs are evaluated and sorted by score, and
input devices with the best matches are applied first (as they already
did).
This should break the tie if eg. there's 2 outputs with similar dimensions,
but one of them has some EDID match in addition. The output with multiple
matches will score higher up, while it might have been entirely discarded
with the previous implementation.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1175https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1202
The work at https://gitlab.gnome.org/GNOME/gnome-control-center/issues/239
intended to make integrated devices optionally mappable to other outputs
(in order to allow fix mishandling from our heuristics, or to quickly reach
things in other monitor without changing devices).
This was missed in that plan, we do allow cycling outputs, but we still did
prevent it from doing anything for integrated devices. Fix that, and change
output cycling so we don't allow a "NULL" EDID for integrated devices, this
makes those go through the MetaInputMapper (resulting in one output listed
twice), instead of mapping to the full stage.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1186https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1201
The cursor tracker may give us a valid position, and a
valid cursor sprite, and yet the cursor can be hidden,
meaning we must hide the cursor on the stream as well.
Remove cursor from stream buffer if it's hidden.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
Scanouts are taken away after painting. However, when we're
streaming, what we actually want is to capture whatever is
going to end up on screen - and that includes the scanout
if there's any.
Add a before-paint watch that only records new frames if a
scanout is set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
When there's a direct scanout set in the stage view, we
have to use it instead of the view's regular onscreen
framebuffer.
Use the new CoglScanout API to implement blitting to the
stream framebuffer.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
This will be used when screencasting monitors so that if
there's scanout in place, it'll still be possible to blit
it to a PipeWire-owned framebuffer, and stream it.
Add a new 'blit_to_framebuffer' vfunc to CoglScanout, and
implement it in MetaDrmBufferGbm.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1421
Just because X11/XI uses a particular terminology doesn't mean we
have to use the same terms in our own API. The replacement terms
are in line with gtk@1c856a208, which seems a better precedent
for consistency.
Follow-up to commit 17417a82a5.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1425
Using opaque painting paths can have a big impact on painting performance.
In order to easily validate whether we use the opaque paths, add a opaque
(green) or blended (purple) overlay over painted areas if the
`META_DEBUG_PAINT_OPAQUE_REGION` `MetaDebugPaintFlag` is set.
You can do so in `lg` via:
`Meta.add_debug_paint_flag(Meta.DebugPaintFlag.OPAQUE_REGION)`
This can be helpful for application developers, as previously it was not
trivial to check whether e.g. Wayland or X11 opaque regions where
properly set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1372
Analogous to `ClutterDrawDebugFlag` but intended for concepts that
are not present in Clutter, such as Wayland/X11 opaque regions.
Also add the first flag for the later.
To set the flag, run:
`Meta.add_debug_paint_flag(Meta.DebugPaintFlag.OPAQUE_REGION)`
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1372
This is no longer directly related to DBus messages, but our own event
queue. Change the wording and use CLUTTER_PRIORITY_EVENTS to make it
bolder, even though it's the same than G_PRIORITY_DEFAULT.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1286
We set an idle to coalesce multiple IM events together, as the protocol
requires us to send them in one frame, and unfortunately there is no
idea about whether more IM events are upcoming.
One good hint though are key events generated from the IM, we want to
apply all IM changes before the key event is processed, so make it sure
that the .done event is flushed before the key event is handled.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1286
The clutter_input_focus_filter_key_event() function has been made
a more generic filter_event(). Besides its old role about letting
key events go through the IM, it will also process the IM events
that are possibly injected as a result.
Users have been updated to these changes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1286
When in the overview culling via `self->clip_region` is unavailable.
The region is `NULL` because the paint call has not originated from a
`WindowGroup`, because the overview does not use `WindowGroup`.
So the main wallpaper was being painted in full while in the overview.
That's a waste of effort because `redraw_clip` is going to be used to
stencil/scissor out only the parts that are changing. We don't need to
paint *most* of the wallpaper, only the parts behind anything changing.
For the overview this reduces GPU power usage (intel_gpu_top) roughly
10% and reduces render times almost as much.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1363
`meta_background_content_paint_content` was mixing two different
coordinate systems in `actor_pixel_rect`. It was initialized with
actor-local coordinates and then `if (self->clip_region)` would be
treated as stage coordinates. This worked because `self->clip_region`
was only non-NULL outside of the overview where both coordinate systems
were the same. So it always got the right answer, possibly by accident.
In order to enhance the function however we will need to know which
coordinate system we're working in, so now we make it explicit.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1363
There's no need to update the outputs recursively in case the actor gets
mapped or unmapped. That's because mapping happens recursively itself,
so if a window with multiple subsurfaces is shown, all subsurfaces will
receive a "notify::mapped" signal.
Since this was the only remaining user of
meta_wayland_surface_update_outputs_recursively(), we can now remove
that function.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
Since we now listen to the "stage-views-on-changed" signal (which
"catches" all the changes we want) on MetaWaylandActorSurfaces for
updating the wl_outputs the surface is on, we no longer need to call
meta_wayland_surface_update_outputs_recursively() on all geometry
changes, so remove that signal handler.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
ClutterActors new "stage-views-changed" signal fits pretty well for the
updating of wl_outputs a MetaWaylandActorSurface is on: With that signal
we get notified if the surface moved to a different CRTC, of which every
output has at least one.
So start listening to that signal, which fixes a bug where the wl_output
of a surface changes, but its allocation remains the same (which means
no signals triggering an update of the outputs will be emitted) and no
enter/leave events for the new wl_outputs are sent to the client. This
can happen when a monitor is hotplugged but the new allocation is
exactly the same as the old one even though it's on a different monitor.
Since the "stage-views-on-changed" signal will also get emitted when a
parent actor of the surface is moved, this means we can now remove the
call to meta_wayland_surface_update_outputs_recursively() on window
position changes or the completion of window-effects.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1358
QXL doesn't support mmap():ing a DMA buffer allocated in mutter inside
the PipeWire stream consumer process. To make screen casting work again
on QXL, disable DMA buffer based screen casting for QXL.
Eventually, it should be the client that renegotiates the supported
buffer types, but until then we need this list.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1318
The X server, including Xwayland, can be compiled with different X11
extensions enabled at build time.
When an X11 extension is built in the X server, it's usually also
enabled at run time. Users can chose to disable those extensions at run
time using the X server command line option "-extension".
However, in the case of Xwayland, it is spawned automatically by the
Wayland compositor, and the command line options are not configurable
by users.
Add a new setting to disable a selected set of X extension in Xwayland
at startup, without needing to rebuild Xwayland.
Of course, if Xwayland is not built with a given extension support in
the first place (which is the default for the security extension for
example), that option has no effect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1405
Delay the addition and removal of devices using ClutterDeviceEvent's so that
they are processed following the libinput event order, and that we don't
have to flush the events on removal.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
When a device is removed from the seat the events that this device may have
emitted just before being removed might still be in the stage events queue,
this may lead a to a crash because:
Once the device is removed, we dispose it and the staling event is
kept in queue and sent for processing at next loop.
During event processing we ask the backend to update the last device
with the disposed device
The device is disposed once the events referencing it, are free'd
The actual last device emission happens in an idle, but at this point
the device may have been free'd, and in any case will be still disposed
and so not providing useful informations.
To avoid this, once a device has been added/removed from the seat, we queue
ClutterDeviceEvent events to inform the stack that the device state has
changed, preserving the order with the other actual generated device events.
In this way it can't happen that we emit another event before that the
device has been added or after that it has been removed.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1345
When removing a device that has been just marked as the last in use, we may
try to notify that a NULL device is the last one.
This is not supported, as both update_last_device() and the clients of the
"::last-device-changed" signal are assuming that the last device is always
a valid ClutterInputDevice.
So let's avoid erroring, and stop the idle when clearing the current device.
Related to: https://gitlab.gnome.org/GNOME/mutter/-/issues/1345https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1371
A GAppInfo is not guaranteed to have a filename or an application (or
rather a desktop ID). Add a check for application_id to be non-NULL
before trying to call sn_launcher_set_application_id, which would crash
otherwise.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1392
PipeWire reuses buffers, and buffer metadatas, when streaming. When
the cursor is moved to outside the stream, the cursor meta also needs
to be updated, otherwise it'll use the cursor position of whatever is
in the buffer.
Don't bail out when cursor is outside the stream, and ensure to record
a metadata-only frame. This only applies to metadata streams.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1417
If we returned early in one of the checks but already assigned the
surface role, we'd later run into a double-free and crash. Just do
the checks at the beginning.
Also add a missing return statement that was left out in commit
88ff196fe3 and tighten the parent surface check.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1415
The spec allows `parent_resource` to be `NULL`, requiring the parent
surface to get specified by some other protocol. Send a protocol error
with some meaningful explanation instead of crashing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1408
Currently, the maximum size for a mouse pointer bitmap for screen
casting is 64x64 pixels.
However, this limit is hit way too often as it is way too low and
results in crashes in either gnome-remote-desktop or mutter.
For example: The a11y settings in g-c-c allow setting a larger pointer
bitmap in order to increase the visibility of the mouse pointer.
With the current limit of 64x64 pixels it is not possible to use the
larger variants of the default mouse pointer bitmap, without
experiencing any crash.
Another way to hit the limit is when display scaling is used or some
game uses a custom (large) mouse pointer bitmap.
The VNC backend in gnome-remote-desktop does not seem to have a maximum
pointer bitmap size.
The RDP backend on the other hand has a maximum pointer bitmap size at
384x384.
Use this size (384x384) as maximum size instead of the current 64x64
size for mouse pointer bitmaps to avoid crashes in mutter and
gnome-remote-desktop and to ensure that bigger mouse pointer bitmaps
can be used.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1414
It is linear config manager created when ensuring configuration.
However, the switch config is not set as LINEAR, but left as UNKNOWN.
This leads switch mode OSD always shows "Join Displays" icon, rather
than the next icon which is "External Only" after connect an external
display and press Super+P once at first time since mutter starts.
This patch moves switch config setting into
meta_monitor_config_manager_create_linear() (and the sibling functions)
to well prepare the monitors config and avoid missing settings.
This is a regression introduced by 149e4d6934.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1362
Clients can set minimum and maximum to identical values to indicate a
fixed-size window. A compositor can ignore these requests and thus a client
has to ensure these limits.
To support clients that do not ensure these size limits by themselves and
to skip unnecessary function calls, we will prevent resizing requests by
the client if a fixed-size has been requested.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1331
We're moving towards not supporting stand-alone application style
clutter stages, meaning the stage tests use will be reused instead of
recreated. To make this feasable, tests must clean up after themself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
meta_run() is still left intact and does the same as before; the new
functions are only intended to be used by tests, as they may need to set
things up after starting up. Doing so linearly in the test case is much
easier than adding callbacks, so meta_run() is split up to make this
possible.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
The delete event was used for signalling the close button was clicked on
clutter windows. Being a compositor we should never see these, unless
we're running nested. Remove the plumbing of the DELETE event and just
directly call meta_quit() when we see it, if we're running nested.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
We checked if we were using the usig the X11 backend to decide when to
deal with a11y event posting - in order to make the clutter code less
windowing system dependent, make this check a check whether we're a
display server or not, in contrast to a window/compositing manager
client. This is made into a vfunc ot ClutterBackendClass, implemented by
MetaClutterBackendNative and MetaClutterBackendX11.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
Test that if a timeline got its frame clock from a parent of the
associated actor, if that actor moves across the stage so that the stage
views changes and thus the would be picked frame clock too, this is
noticed by the timeline so that it also changes to the correct frame
clock.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Timelines where the frame clock was picked from a parent of the
associated actor didn't get notified about any stage views changes, as
it only listened on the associated actor. If that actor didn't actually
get its stage views changed (because it went from empty to empty), we'd
end up with a stale frame clock, leading to crashes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Flip flop resize, which is the result of respecting ConfigureNotify
makes test annoyingly racy, as one cannot do
clutter_actor_set_size (stage, 1024, 768);
wait_for_paint (stage);
g_assert_assert (clutter_actor_get_width (stage) == 1024);
The reason for this is any lingering ConfigureNotify event that might
arrive in an inconvenient time in response to some earlier resize.
In order to not risk breaking any current behavior in the X11 CM case
(running as a compositing window manager), only avoid changing the stage
size in response to ConfigureNotify when running nested.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
This aims to make sure a view and its resources are destroyed when it
should. Using references might keep certain components (e.g frame clock)
alive for too long.
We currently don't take any long lived references to the stage view
anywhere, so this doesn't matter in practice, but this may change, and
will be used by a to be added test case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Just as wl_shm, hook up the Wayland DMA-BUF protocol to the 64 bit half
point pixel formats too. This makes it possible for Wayland EGL clients
to use 64 bit pixel EGL configurations.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
Now that cogl understands them, hook wl_shm up so they can be used.
This also bumps the wayland-server version dependency to 1.17.90, which
corresponds to the master branch of wayland. The new formats will be
available in 1.18.0.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
Without doing this, we'd use the same sprite that was last set by
mutter, most likely a leftptr cursor, and fail to update when e.g.
moving the pointer above a text entry and the displayed cursor updated
to a cursor position marker.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
The displayed cursor is the one displayed on the screen, e.g. via the
hardware cursor plane, by Xorg, or using the stage overlay.
When screen recording under X11, we don't get a stream of pointer and
cursor updates, as they might be grabbed by some other client. Because
of this, the cursor tracker or cursor renderer are not kept up to date
with positional and cursor state.
To be able to use the stage overlays when recording, we need to be able
to update the overlay without updating the displayed cursor, as we
shouldn't update the X server with cursor state we just retrieved from
it.
Thus, to achieve this, create a separate overlay cursor pointer. When
being a display server, they are always the same, but when using X11,
during screen recording, the overlay one will be polled at a fixed
interval to get a somewhat up to date state.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
Always force-track the cursor position (so that the X11 backend can keep
it up to date), and if the cursor wasn't part of the sampled
framebuffer when reading pixels into CPU memory, draw it in an extra
pass using cairo after the fact. The cairo based cursor painting only
happens on the X11 backend, as we otherwise inhibit the hw cursor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
On X11 we won't always receive cursor positions, as some other client
might have grabbed the pointer (e.g. for implementing a popup menu). To
make screen casting show a somewhat correct cursor position, we need to
actively poll the X server about the current cursor position.
We only really want to do this when screen casting or taking a
screenshot, so add an API that forces the cursor tracker to track the
cursor position.
On the native backend this is a no-op as we by default always track the
cursor position anyway.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
Only when the cursor isn't handled by the backend is the overlay made
visible. This is intended to be used when painting the stage to an
offscreen using clutter_stage_paint_to_(frame)buffer() in a way where
the cursor is always included.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1391
Detect displays marked as 'non-desktop' by the kernel and skip them when
creating the outputs. Mutter is not able to render images that are shown
properly on those devices anyway.
This avoids lighting up attached VR HMDs and showing the GDM login
screen between the eyes in a VR HMD instead of on the monitor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1393
Allowing code from inside mutter to create a child process and
delegate on it some of its tasks is something very useful. This can
be done easily with the g_subprocess and g_subprocess_launcher classes
already available in GLib and GObject.
Unfortunately, although the child process can be a graphical program,
currently it is not possible for the inner code to identify the
windows created by the child in a secure manner (this is: being able
to ensure that a malicious program won't be able to trick the inner
code into thinking it is a child process launched by it).
Under X11 this is not a problem because any program has full control
over their windows, but under Wayland it is a different story: a
program can't neither force their window to be kept at the top (like a
docker program does) or at the bottom (like a program for desktop icons
does), nor hide it from the list of windows. This means that it is not
possible for a "classic", non-priviledged program, to fulfill these
tasks, and it can be done only from code inside mutter (like a
gnome-shell extension).
This is a non desirable situation, because an extension runs in the
same main loop than the whole desktop itself, which means that a
complex extension can need to do too much work inside the main loop,
and freeze the whole desktop for too much time. Also, it is important
to note that javascript doesn't have access to fork(), or threads,
which means that, at most, all the parallel computing that can do is
those available in the _async calls in GLib/GObject.
Also, having to create an extension for any priviledged graphical
element is an stopper for a lot of programmers who already know
GTK+ but doesn't know Clutter.
This patch wants to offer a solution to this problem, by offering a
new class that allows to launch a trusted child process from inside
mutter, and make it to use an specific UNIX socket to communicate
with the compositor. It also allows to check whether an specific
MetaWindow was created by one of this trusted child processes or not.
This allows to create extensions that launch a child process, and
when that process creates a window, the extension can confirm in a
secure way that the window really belongs to that process
launched by it, so it can give to that window "superpowers" like
being kept at the bottom of the desktop, not being listed in the
list of windows or shown in the Activities panel... Also, in future
versions, it could easily implement protocol extensions that only
could be used by these trusted child processes.
Several examples of the usefulness of this are that, with it, it
is possible to write programs that implements:
- desktop icons
- a dock
- a top or bottom bar
...
all in a secure manner, avoiding insecure programs to do the same.
In fact, even if the same code is launched manually, it won't have
those privileges, only the specific process launched from inside
mutter.
Since this is only needed under Wayland, it won't work under X11.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/741
Intended to be used to pass state from screen cast clients down the
line. The first use case will be a boolean whether a screen cast is a
plain recording or not, e.g. letting the Shell decide whether to use a
red dot as the icon, or the generic "sharing" symbol.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1377
GLib will now be linking against sysprof-capture-4.a. To support that,
sysprof had to remove the GLib dependency from sysprof-capture-4 which
had the side-effect of breaking ABi.
This bumps the dependency and includes a fallback to compile just the
libsysprof-capture-4.a using a subproject wrap.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1352
Commit 510cbef15a changed the logic in `handle_update()` for X11 window
actors to return early if the surface is not an X11 surface.
That works fine for plain Xorg, but on Xwayland, the surface is actually
a Wayland surface, therefore the function returns early before updating
the drop shadows of server-side decorations for X11 windows.
Change the test logic to restore drops shadows with Xwayland windows.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1384
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1358
The memory selection source was only providing the "text/plain" or the
"text/plain;charset=utf-8" mimetype, but not "STRING" or "UTF8_STRING",
which some X11 clients, like wine, are looking for. This was breaking
pasting from the clipboard in wine applications.
Fix this by adding those targets when they are missing and the selection
source provides the corresponding mimetypes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1369
Wine destroys its old selection window immediately before creating a new
selection. This would trigger restoring the clipboard, which would
overwrite the new selection with the old one. The selection window
however can also be destroyed as part of the shutdown process of
applications, such as Chromium for example. In those cases we want the
clipboard to be restored after the selection window has been destroyed.
Solve this by not immediately restoring the clipboard but instead using
a timeout which can be canceled by any new selection owner, such as in
the Wine case.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1338https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1369
The new "id" properties for the MetaCrtc* and MetaOuput* objects are 64-bit
values, so take care to pass 64-bit values when calling g_object_new.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1343.
When using its EGLStream-based presentation path with the proprietary NVIDIA
driver, mutter will use a different function to process page flips -
custom_egl_stream_page_flip. If that fails due to an EBUSY error, it will
attempt to retry the flip. However, when retrying, it unconditionally uses the
libdrm-based path. In practice, this causes a segfault when attempting to
access plane_assignments->fb_id, since plane_assignments will be NULL in the
EGLStream case. The issue can be reproduced reliably by VT-switching away from
GNOME and back again while an EGL application is running.
This patch has mutter also use the custom page flip function when retrying the
failed flip.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1375
Instead of blindly hoping that `$INCLUDE` contains the parent directory
of `gsettings-desktop-schemas`.
Because `gsettings-desktop-schemas.pc` says:
```
Cflags: -I/SOME/DIRECTORY/gsettings-desktop-schemas
```
Which means to include the version that Meson has configured you need
to drop the directory prefix and only `#include <gdesktop-enums.h>`.
This fixes a build failure with local installs triggered by 775ec67a44
but it's also the right thing to do™.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1370
During animation or other things that cause multiple frames in a row
being painted, we might skip recording frames if the max framerate is
reached.
Doing so means we might end up skipping the last frame in a series,
ending with the last frame we sent was not the last one, making things
appear to get stuck sometimes.
Handle this by creating a timeout if we ever throttle, and at the time
the timeout callback is triggered, make sure we eventually send an up to
date frame.
This is handle differently depending on the source type. A monitor
source type reports 1x1 pixel damage on each view its monitor overlaps,
while a window source type simply records a frame from the surface
directly, except without recording a timestamp, so that timestamps
always refer to when damage actually happened.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1361
Now that we don't use the record function to early out depending on
implicit state (don't record pixels if only cursor moved for example),
let it simply report an error when it fails, as we should no longer ever
return without pixels if nothing failed.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1361
Both do more or less the same but with different methods - one puts
pixels into a buffer using the CPU, the other puts pixels into a buffer
using the GPU.
However, they are behaving slightly different, which they shouldn't.
Lets first address the misleading disconnect in naming, and later we'll
make them behave more similarly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1361
That was obviously always the intention, but it didn't work when the
display was scaled. My 3840x2160 monitor with a 3840x2160 texture was
being rendered with LINEAR filtering.
It seems the `force_bilinear` flag was TRUE when it should be FALSE.
Because a texture area that's an integer fraction of the texture
resolution is still a perfect match when that integer is the monitor
scale. We were also getting:
`meta_actor_painting_untransformed (fb, W, H, W, H, NULL, NULL) == FALSE`
when the display was scaled. Because the second W,H was not the real
sampling resolution. So with both of those issues fixed we now get
NEAREST filtering when the texture resolution matches the resolution it's
physically being rendered at.
Note: The background texture actually wasn't equal to the physical monitor
resolution prior to January 2020 (76240e24f7). So it wasn't possible to do
this before then. Since then however, the texture resolution is always
equal to the physical monitor resolution.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1346
It doesn't take all children - subsurfaces in this case - into
account, thus creating glitches if subsurfaces extend outside
of the toplevel surface.
Further more it doesn't seem to serve any special purpose - it was
added in f7315c9a36, a pretty big commit, and no discussion was
started about the code in question. So it was likely just overlooked
in the review process.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/873
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1316
gnome-shell displays workspace previews at one tenth scale. That's a
few binary orders of magnitude so even using a LINEAR filter was
resulting in visible jaggies. Now we apply mipmapping so they appear
smooth.
As an added bonus, the mipmaps used occupy roughly 1% the memory of
the original image (0.1 x 0.1 = 0.01) so they actually fit into GPU/CPU
caches now and rendering performance is improved. There's no need to
traverse the original texture which at 4K resolution occupies 33MB,
only a 331KB mipmap.
In my case this reduces the render time for the overview by ~10%.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/1416https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1347
The frame clock owner should be able to explicitly destroy (i.e. make
defunct) a frame clock, e.g. when a stage view is destructed. This is so
that other objects can keep reference to its without it being left
around even after stopped being usable.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Currently there is a point in between hot plug, and when the stage view
list is up to date. The check also tests for this behaviour; would this
ever change, the test should be adapted to deal with this too.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Replace the default master clock with multiple frame clocks, each
driving its own stage view. As each stage view represents one CRTC, this
means we draw each CRTC with its own designated frame clock,
disconnected from all the others.
For example this means we when using the native backend will never need
to wait for one monitor to vsync before painting another, so e.g. having
a 144 Hz monitor next to a 60 Hz monitor, things including both Wayland
and X11 applications and shell UI will be able to render at the
corresponding monitor refresh rate.
This also changes a warning about missed frames when sending
_NETWM_FRAME_TIMINGS messages to a debug log entry, as it's expected
that we'll start missing frames e.g. when a X11 window (via Xwayland) is
exclusively within a stage view that was not painted, while another one
was, still increasing the global frame clock.
Addititonally, this also requires the X11 window actor to schedule
timeouts for _NET_WM_FRAME_DRAWN/_NET_WM_FRAME_TIMINGS event emitting,
if the actor wasn't on any stage views, as now we'll only get the frame
callbacks on actors when they actually were painted, while in the past,
we'd invoke that vfunc when anything was painted.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/903
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/3https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
This also changes the view construction path used by the renderer view
to use the new 'add_view()' function, meaning we have a common entry
point for views into the renderer, which will be useful later on.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Before we'd create the view in init(), then continue poking at it in
realize(). Move all of the screen stage view initialization to
realize(), as that's when we have all the dependent state available.
This is possible since there is nothing needing it until realizing.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The repaint callbacks are not tied to repaint, thus a bit misleading.
What the functionality in the pre/post-paint callbacks here cares about
is when actually painting; the non-painting related parts has already
moved out to a *-update signal.
This also renames the related MetaWindowActorClass vfuncs, to align with
naming convention of the signals that it listens to.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Instead of going via MetaCompositor to know about when we updated
(confusingly named post-paint), use the new stage signal directly.
Note that this doesn't change the time frame callbacks are dispatched;
it's still not tied to actual painting even though it seemed so before
given the function names.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The clutter "thread" repaint callback are not tied to painting, but
indirectly to updating. What the cursor renderer cares about is when we
actually painted, as this is related to the OpenGL fallback paths.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We'd emit multiple "presented" signals per frame, one for "sync" and one
for "completion". Only the latter were ever used, and removing the
differentiation eases the avoidance of cogl onscreen framebuffer frame
callback details leaking into clutter.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The vfunc was not tied to "paint", but was used by MetaWindowActorX11
as part of the "update" mechanisms. In order to make that more clear,
special case it in MetaWindowActorX11 by type checking the surface
actor, handling the case without MetaSurfacActor abstraction.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The synchronization must happen no matter the painting, as it in itself
might result in reported damage, making the stage actually painted. Thus
move it out of the "pre-paint" handler, to something explicitly not tied
to the painting itself - ClutterStage::before-update.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Instead of the 'pre-paint' signal on MetaCompositor, rely directly on
the 'before-update' signal on the stage. A reason for this is that the
callback should not only invoked in connection to painting, but updating
in general. Currently the 'pre-paint' signal is emitted no matter
whether there were any painting or not, but that's both misleading and
will go away.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The mutexes was used by ClutterTexture's async upload and to match GDK's
mutexes on X11. GDK's X11 connection does not share anything with
Clutter's, we don't have the Gdk Clutter backend left, and we have
already removed ClutterTexture, so lets remove these mutexes as well.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
A frame clock dispatch doesn't necessarily result in a frame drawn,
meaning we'll end up in the idle state. However, it may be the case that
something still requires another frame, and will in that case have
requested one to be scheduled. In order to not dead lock, try to
reschedule directly if requested after dispatching, if we ended up in
the idle state.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The native backend had a plain counter, and the X11 backend used the
CoglOnscreen of the screen; change it into a plain counter in
ClutterStageCogl. This also moves the global frame count setting to the
frame info constuctor.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We currently have mutter set a global frame counter on the frame info in
the native backend, but in order to do this from clutter, change the
frame info construction from being implicitly done so when swapping
buffers to having the caller create the frame info and passing that to
the swap buffers call.
While this commit doesn't introduce any other changes than the API, the
intention is later to have the caller be able to pass it's own state
(e.g. the global frame count) along with the frame info.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We had time unit conversion helpers (e.g. us2ms(), ns2us(), etc) in
multiple places. Clean that up by moving them all to a common file. That
file is clutter-private.h, as it's accessible by both from clutter/ and
src/.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Currently unused, but it's intention is to use as a initial refresh rate
for a with the stage view associated frame clock. It defaults to 60 Hz
if nothing sets it, but the native backend sets it to the associated
CRTCs current mode's refresh rate.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
Without an associated actor, or explicit frame clock set, in the future
a timeline will not know how to progress, as there will be no singe
frame clock to assume is the main one. Thus, deprecate the construction
of timelines without either an actor or frame clock set.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The MetaLater functionality needs to make sure an update is scheduled so
that it can run its callbacks etc. This used a ClutterTimeline (which is
an object more or less meant to drive animations markers, frames etc)
just to keep the master frame clock running. We're moving away from a
single master clock, so just schedule updates directly instead, with the
newly exposed API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
We'd check if there was any queued redraw on the stage, but this is
inappropriate for two reasons:
1) A monitor and area screen cast source only cares about damage on a
subset of the stage.
2) The global pending-redraw is going away when paint scheduling will be
more view centric.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
The timestamp comes from the GSource, meaning it's a more accurate
representation of when the frame started to be dispatched compared to
getting the current time in any callback.
Currently unused.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
In certain scenarios, the frame clock needs to handle present feedback
long before the assumed presentation time happens. To avoid scheduling
the next frame to soon, avoid scheduling one if we were presented half a
frame interval within the last expected presentation time.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
This adds a current unused, apart from tests, frame clock. It just
reschedules given a refresh rate, based on presentation time feedback.
The aiming for it is to be used with a single frame listener (stage
views) that will notify when a frame is presented. It does not aim to
handle multiple frame listeners, instead, it's assumed that different
frame listeners will use their own frame clocks.
Also add a test that verifies that the basic functionality works.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1285
When a transition is created for the allocation change, it will delay
the new allocation box getting set depending on transition details.
This, however, means that e.g. the 'needs_allocation' flag never gets
cleared if a transition is created, causing other parts of the code to
get confused thinking it didn't pass through a layout step before paint.
Fix this by calling clutter_actor_allocate_internal() with the current
allocation box if a transition was created, so that we'll properly clear
'needs_allocation' flag.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1345
41130b08eb added a fix for culling subsurfaces with geometry scale.
Unfortunately it only did so for the opaque regions, not for clip and
unobscured regions, as the effect was hidden by bug that was only
fixed by 3187fe8ebc.
Apply the same fix to clip and unobscured regions and use the chance
to move most of the slightly hackish geometry scale related code
into a single place.
We need to scale slightly differently in the two cases, indicated by
the new `ScalePerspectiveType` enum, as the scale is dependent on the
perspective - once from outside, once from inside of the scaled actor.
Closes https://gitlab.gnome.org/GNOME/mutter/-/issues/1312
Since we now always return a resource scale, we can remove the boolean
return value from clutter_actor_get_resource_scale() and
_clutter_actor_get_real_resource_scale(), and instead simply return the
scale.
While at it, also remove the underscore from the
_clutter_actor_get_real_resource_scale() private API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
Add private API to ClutterBackend to set a fallback resource scale
available to Clutter. This API will be used for "guessing" the
resource-scale of ClutterActors in case the actor is not attached to a
stage or not properly positioned yet.
We set this value from inside mutters MetaRenderer while creating new
stage-views for each logical monitor. This makes it possible to set the
fallback scale to the scale of the primary monitor, which is the monitor
where most ClutterActors are going to be positioned.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1276
The portal API requires a screencast session only for absolution motion
with remote desktop, other methods including relative motion do not
require a screencast session.
There is no reason to be more strict than the API actually is, check for
a screencast session only when required, like for absolute motion events
and touch events.
Tested with https://gitlab.gnome.org/snippets/1122
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1307
There are a couple of places in gnome-shell where we aren't interested
in which workspace is active, but whether a given workspace is active.
Of course it's easy to use the former to determine the latter, but we
can offer a convenience property on the workspace itself almost for
free, so let's do that.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1336
These tests were written (and copy-pasted) before ClutterActor
had an actual background-color property. As a preparation to
the removal of ClutterRectangle, replace all these rectangles
with plain actors and background colors.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
The property is deprecated and the current implementation simply
redirects it to ClutterActor::background-color, so remove it.
Also update the tests to set the background color directly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
It is deprecated in favor of the 'z-position' property, and
the implementation itself redirects to the z-position, so
just drop it and replace all get|set_depth calls to their
z-position counterparts.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1332
We were setting the pipeline colour to all white (1.0, 1.0, 1.0, 1.0)
and so the default layer combine function multiplied each pixel
(R, G, B, A) by all ones. Obviously multiplying by one four times per
pixel is a waste of effort so we remove the colour setting *and* set
the layer combine function to a trivial shader that will ignore whatever
the current pipeline colour is set to. So now we do **zero** multiplies
per pixel.
On an i7-7700 at UHD 3840x2160 this results in 5% faster render times
and 10% lower power usage (says intel_gpu_top). The benefit is probably
much higher for virtual machines though, as they're no longer being
asked to do CPU-based math on every pixel of a window.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1331
The previous commit removed checks for intermediate focus states which
would make tests randomly fail, because of their time dependence. What
can be tested however is that if there is no other window available that
would accept the focus, that the focus remains at 'none', after the
focused window has been closed. This newly introduced test checks the
focus directly after closing the window (and syncing) and after the time
it would have taken for the queue to finish. The first check has a
similar timing issue as the removed focus checks in the other tests, but
the test will never accidentally fail, because regardless of whether the
queue has finished or not, the focus is always expected to be 'none'.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1329
While c3d13203 ensured that the test-client has actually closed the
window before testing for the focus change, it also made another timing
related issue with the tests more likely to happen. Serveral tests
assert that the focus is set to 'none' after the focussed window has
been closed when the window below does not accept focus. This however
can never be reliably tested, because closing the window triggers
timeout based iteration of a queue of default focus candidate windows.
This starts after the window has been closed and might finish before the
clients have finished synchronizing. This issue is more likely to
trigger the shorter the queue is and the more test clients there are
that could delay the synchronization.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1329
This avoids some issues which could happen on some setups[0] due to
meta-native-renderer.c:dummy_power_save_page_flip →
meta_onscreen_native_swap_drm_fb implicitly turning of the primary
plane (by destroying the KMS framebuffer assigned to it):
* drmModeObjectSetProperty could return an "Invalid argument" error
between setting a non-empty cursor with drmModeSetCursor(2) and
enabling the primary plane again:
Failed to DPMS: Failed to set connector 69 property 2: Invalid argument
(This was harmless other than the error message, as we always re-set
a mode on the CRTC after setting the DPMS property to on, which
enables the primary plane and implicitly sets the DRM property to on)
* drmModeSetCursor(2) could return an "Invalid argument" error between
setting the DPMS property to on and enabling the primary plane again:
Failed to set hardware cursor (drmModeSetCursor failed: Invalid argument), using OpenGL from now on
[0] E.g. with the amdgpu DC display code.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1240
In commit 4c1fde9d MetaCullable related code was moved out of
MetaShapedTexture into MetaSurfaceActor. While generally desirable,
this removed drawing optimizations in MetaShapedTexture for partial
redraws. The common case for fully obscured actors was still supposed
to work, but it was now discovered that it actually did not.
This commit revert parts of 4c1fde9d: it reintroduces clipping
to MetaShapedTexture but leaves all culling and actor related logic
in MetaSurfaceActor.
Thanks to Daniel van Vugt for uncovering the issue.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/850
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1295https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1326
When trying to find a default focus window, the code iterates through a
queue of candidates with a timeout between each candidate. If the window
the current timeout is waiting for gets destroyed, this process just
stops instead of trying the next window in the queue.
This issue was made more likely to be triggered with the previous change
to the closed-transient-no-input-parents-queued-default-focus-destroyed
test due to the introduction of a wait, which can introduce a
delay between the two destroy commands.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1325
Some tests were not waiting for the test client to actually issue
destroy commands before checking their effect on the window focus.
Similarly when mutter is supposed to change the focus based on a delay
by sending a WM_TAKE_FOCUS to the client, this also could fail without
synchronization with the client before checking the result.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1325
We delegate the answer through CoglDriverVtable::is_hardware_accelerated
since this is properly a property of the renderer, and not something the
cogl core should know about. The answer given for the nop driver is
admittedly arbitrary, yes it's infinitely fast but no there's not any
"hardware" making it so.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1194
Event delivery with grabbing popups stay essentially the same within
the grabbing client, we still must honor the implicit grab as long as
there is one.
This is however not the case, the popup_grab_focus() function ignores
the button state. The popup_grab_button() function will already indirectly
re-sync the focus surface after the last button is released, so checking
for button state in popup_grab_focus() is sufficient to make the implicit
grab honored with popup grabs involved.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1275https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1270
When a touch sequence was rejected, we'd update the event timestamps of
incoming touch events to help with implementing grabs. This was done by
sending a ClientMessage with a counter, and comparing the counter to
decide whether we're seing a replayed event or not.
This had the unforseen consequence that we would potentially end up
destroying all actors including the stage, since, when mutter receives a
ClientMessage event, it would assume that it's a WM_PROTOCOLS event, and
handle it as such. The problem with this approach is that it would
ignore fact that there might be other ClientMessage types sent to it,
for example the touch synchronization one. What could happen is that the
touch count value would match up with the value of the WM_DELETE_WINDOW
atom, clutter would treat this as WM_PROTOCOLS:WM_DELETE_WINDOW, which
it'd translate to clutter_actor_destroy(stage).
Destroying the stage in such a way is not expected, and caused wierd
crashes in different places depending on what was going on.
This commit make sure we only treat WM_PROTOCOLS client messages as
WM_PROTOCOLS client messages effectively avoiding the issue.
This fixes crashes such as:
#0 meta_window_get_buffer_rect (window=0x0, rect=rect@entry=0x7ffd7fc62e40) at core/window.c:4396
#1 0x00007f1e2634837f in get_top_visible_window_actor (compositor=0x297d700, compositor=0x297d700) at compositor/compositor.c:1059
#2 meta_compositor_sync_stack (compositor=0x297d700, stack=<optimized out>, stack@entry=0x26e3140) at compositor/compositor.c:1176
#3 0x00007f1e263757ac in meta_stack_tracker_sync_stack (tracker=0x297dbc0) at core/stack-tracker.c:871
#4 0x00007f1e26375899 in stack_tracker_sync_stack_later (data=<optimized out>) at core/stack-tracker.c:881
#5 0x00007f1e26376914 in run_repaint_laters (laters_list=0x7f1e2663b7d8 <laters+24>) at core/util.c:809
#6 run_all_repaint_laters (data=<optimized out>) at core/util.c:826
#7 0x00007f1e26b18325 in _clutter_run_repaint_functions (flags=flags@entry=CLUTTER_REPAINT_FLAGS_PRE_PAINT) at clutter-main.c:3448
#8 0x00007f1e26b18fc5 in master_clock_update_stages (master_clock=0x32d6a80, stages=0x4e5a740) at clutter-master-clock-default.c:437
#9 clutter_clock_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at clutter-master-clock-default.c:567
#10 0x00007f1e27e48049 in g_main_dispatch (context=0x225b8d0) at gmain.c:3175
#11 g_main_context_dispatch (context=context@entry=0x225b8d0) at gmain.c:3828
#12 0x00007f1e27e483a8 in g_main_context_iterate (context=0x225b8d0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at gmain.c:3901
#13 0x00007f1e27e4867a in g_main_loop_run (loop=0x24e29f0) at gmain.c:4097
#14 0x00007f1e2636a3dc in meta_run () at core/main.c:666
#15 0x000000000040219c in main (argc=1, argv=0x7ffd7fc63238) at ../src/main.c:534
and
#0 0x00007f93943c1f25 in raise () at /usr/lib/libc.so.6
#1 0x00007f93943ab897 in abort () at /usr/lib/libc.so.6
#2 0x00007f9393e1e062 in g_assertion_message (domain=<optimized out>, file=<optimized out>, line=<optimized out>, func=0x7f93933e6860 <__func__.116322> "meta_x11_get_stage_window",
#3 0x00007f9393e4ab1d in g_assertion_message_expr ()
#4 0x00007f939338ecd7 in meta_x11_get_stage_window (stage=<optimized out>) at ../mutter/src/backends/x11/meta-stage-x11.c:923
#5 0x00007f939339e599 in meta_backend_x11_cm_translate_device_event (x11=<optimized out>, device_event=0x55bc8bcfd6b0) at ../mutter/src/backends/x11/cm/meta-backend-x11-cm.c:381
#6 0x00007f939339f2e2 in meta_backend_x11_translate_device_event (device_event=0x55bc8bcfd6b0, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:179
#7 0x00007f939339f2e2 in translate_device_event (device_event=0x55bc8bcfd6b0, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:208
#8 0x00007f939339f2e2 in maybe_spoof_event_as_stage_event (input_event=0x55bc8bcfd6b0, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:284
#9 0x00007f939339f2e2 in handle_input_event (event=0x7fff62d60490, x11=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:309
#10 0x00007f939339f2e2 in handle_host_xevent (event=0x7fff62d60490, backend=0x55bc89dd5220) at ../mutter/src/backends/x11/meta-backend-x11.c:413
#11 0x00007f939339f2e2 in x_event_source_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at ../mutter/src/backends/x11/meta-backend-x11.c:467
#12 0x00007f9393e6c39e in g_main_dispatch (context=0x55bc89dd03e0) at ../glib/glib/gmain.c:3179
#13 0x00007f9393e6c39e in g_main_context_dispatch (context=context@entry=0x55bc89dd03e0) at ../glib/glib/gmain.c:3844
#14 0x00007f9393e6e1b1 in g_main_context_iterate (context=0x55bc89dd03e0, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/glib/gmain.c:3917
#15 0x00007f9393e6f0c3 in g_main_loop_run (loop=0x55bc8a042640) at ../glib/glib/gmain.c:4111
#16 0x00007f9393369a0c in meta_run () at ../mutter/src/core/main.c:676
#17 0x000055bc880f2426 in main (argc=<optimized out>, argv=<optimized out>) at ../gnome-shell/src/main.c:552
Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/338
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/951https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1317
Make the clutter_input_device_get_actor() API public and remove
clutter_input_device_get_pointer_actor() in favour of the new function.
This allows also getting the "pointer" actor for a given touch sequence,
not only for real pointer input devices like mice.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
Add a method to ClutterSeat that allows peeking the list of input
devices and allow looping through devices a bit faster. The API left is
private so we can make use of peeking the GList internally, but don't
have to expose any details to the outside, which means we'd have to
eventually stick with a GList forever to avoid breaking API.
Since we now have the peek_devices() API internally, we can implement
ClutterSeats public list_devices() API using g_list_copy() on the list
returned by peek_devices().
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1275
As explained in the last commits, we'll let gnome-shell take care of
this since freezing and thawing needs to be decoupled from the effect
starting and ending.
So stop freezing the MetaWindowActor when starting the effect and
thawing the actor when ending the effect.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
As explained in the last commit, gnome-shell needs to be able to thaw
window actor updates during its size-change effect is active.
So make meta_window_actor_freeze() and meta_window_actor_thaw() public
API, which will allow the shell to freeze and thaw actor updates itself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1250
