Currently when the extensions list is scrolled, it is possible to
keynav out of view, as the scrolling doesn't follow the key focus.
Hook up the adjustment to fix that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
Currently the main window is a plain Gtk.ApplicationWindow that is
built and managed from within the application.
As the application becomes more complex, it makes sense to decouple
the two and handle the window from a separate ExtensionsWindow class.
Not least this is a prerequisite of using a widget template for the
window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
GNOME Software will remove its extension support, so we should stop
referencing it in addition to extensions.gnome.org.
In fact, the placeholder is not the best place to hint at where new
extensions can be found, as the user will never see it in case the
distribution includes pre-installed extensions.
So remove the hint altogether, we will add it back in a more prominent
place later.
With the whole placeholder now being much lighter, we can stop dimming
the remaining elements.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1968
If all password entries in dialogs are hidden, there is either an entry
that has visible characters or no entry at all. That means we don't have
to show the caps lock warning at all, so hide it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the headlines of the dialogs now use a much larger font, the
strings need to be shorter so they won't be ellipsized. So use a shorter
strings for those titles and also adjust the title-strings of the
notifications sent by the NetworkAgent to be consistent.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the wiggle effect will be used by the redesigned prompt-dialogs
and we always want to use the same parameters, move those as defaults
for the wiggle function to the util.js file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
Since the caps-lock warning adds a lot of spacing to dialogs and the
lock screen, hide it by default and only show it when necessary. To make
the transition smooth instead of just showing the label, animate it in
using the height and opacity.
Also add some bottom padding to the label so we can show or hide that
padding, too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/952
The caps-lock warning is more related to entries than dialogs and is
also used in gdm, which is not realated to dialogs at all. Rename the
css class to caps-lock-warning-label and move it to the entry
stylesheet.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/952
The Animation class inherits from St.Bin and manages the scale factor
in the image loading, but the widget size doesn't change and doesn't
depend on the scale factor so when the scale factor is different
from 1 the widget size doesn't match the image size.
This patch resizes the Animation widget using the scale factor so the
widget will match the animation images sizes.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1746
Now that we have a way to check for updates and download them, we
should actually apply them as well. Do this on startup before any
extensions are initialized, to make sure we don't run into any
conflicts with a previously loaded version.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
While it is possible that an extension has a newer version available
than the previously downloaded update, it's more likely that we end up
downloading the same archive again. That would be a bit silly despite
the usually small size, so we can either use the metadata from the
update, or exclude the extension from the check.
The latter is much easier, so let's go with that for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Currently the method installs updates instead of merely checking for
them (or it would do, if it actually worked).
This is not just surprising considering the method name, the whole idea
of live updates is problematic and will not work properly more often
than not:
- imports are cached, so any local modules will stay at their
original version until a shell restart
- GTypes cannot be unregistered
So change the method to only download available updates, and set the
extensions' hasUpdate state accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
The current support for extension updates is half-baked at best.
We are about to change that, and implement offline updates similar
to gnome-software.
As a first step, add a hasUpdate property to the extension state
which will communicate available updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Since a11f417cd0, both drag and scroll
gestures are added to Main.layoutManager.overviewGroup actor, while
previously drag gesture was added to Main.overview._backgroundGroup
instead. Since we cannot use 2 different actors for dragging and scrolling
anymore. just disable the swipe tracker while dragging a window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2151
Since the orientation lock menu entry is a proper menu entry instead of
a icon-only button now, we also show a description-text for that entry,
so update this text depending on whether orientation is locked or not to
better reflect what clicking the menu entry will do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/964
Since we don't really know what the buttons we're adding to the dialogs
are about, we can't configure a button to "be clicked" when the escape
key is pressed. So add a separate escape key handler to fix that, return
-1 and abort the request.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
When updating the buttons of the mount dialogs, compare the new buttons
to the old ones and only create new buttons in case something changed.
This makes sure key focus isn't reset or lost unnecessarily while a
dialog is opened.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
Since there is a generic layout for dialogs like that now, use it. Also
remove the functionality of focussing a window when clicking a list
item, it's not discoverable at all and pretty unexpected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/961
On Wayland, the display server is the Wayland compositor, i.e.
`gnome-shell` itself.
As a result, we cannot spawn `gnome-shell-perf-helper` before
`gnome-shell` is started, as `gnome-shell-perf-helper` needs to connect
to the display server.
So, instead of spawning `gnome-shell-perf-helper` from the perf tool,
start it from `gnome-shell` itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/941
When do-not-disturb is enabled, non-critical notifications will not
be shown as banners. It therefore makes sense to indicate that state
to the user, so they don't accidentally miss notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
Currently the indicator pad requests a size of 0x0 if the corresponding
indicator is hidden. Right now this is enough to balance out the indicator,
but it won't be when we add spacing to the parent container.
Properly hide the pad with the indicator to avoid that issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
We've had the ability to temporarily disable notification banners
all the way back to 3.0, but we stopped exposing it in the UI with
the 3.16 notification redesign. With the message list being more
concise nowadays and the "Clear" button reduced to a single icon,
we now have space for a "Do Not Disturb" switch again.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/239
We try to make the OSK 1/3rd as big as the monitor. On landscape
layouts we usually get away with it as there's plenty of horizontal
space to enlarge the OSK while keeping the OSK aspect ratio.
In portrait layout, the horizontal space is a lot more scarce so
it means we'll still have plenty of space after making the OSK as
wide as it can possibly be, which will look as odd blank space in
the OSK panel.
In order to fix this, let the OSK panel height be less than 1/3rd
the monitor size if we are dealing with portrait layouts.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/2132
It will happen before next map anyway, and most notably at times
actor sizes produce correct results.
Fixes oddities in emoji pager visibility after showing the emoji
panel, moving to another page, and hiding the OSK with the downward
arrow button. The next time the emoji panel would be shown, panels
had a chance to remain invisible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/943
It is already scheduled to be set on first map. Doing so here triggers
size and theme node checks the actor tree is not ready for, as the
toplevel actor is not yet attached to the stage.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/943
This functionality always suffered from discoveribility
problems, and now that the folder dialog can rename the
app folders, there's just no reason to keep it.
Remove the rename popup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Now that the folder dialog handles the adaptToSize workaround,
there is no need to propagate the call throughout the class
hierarchy.
Remove the propagating calls to adaptToSize, and all the satellite
code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Now the the folder popup behaves like a dialog, it must be
above the app grid, and not be affected by the scroll view
translation.
Add the folder popup to the AllView itself, instead of the
internal Shell.Stack that is inside the scroll view.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Make the AppFolderPopup behave much more like a dialog than a
popup itself. To do that, remove the BoxPointer and replace it
by a StBoxLayout. The dialog is is also bind-constrained to the
view selector.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/896
Since the overview search results now have a dark background layer, we
can brighten the background image a bit again. As a factor we use 0.5,
since that ensures the texts in the IconGrid are still readable and the
background image is visible, too.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/2133
If a new SwitcherPopup is created and there are no windows or apps to
switch through found, instead of returning from _init(), still
initialize the SwitcherPopup and let the check in SwitcherPopup.show()
return false to terminate the popup.
In both cases, with or without the return statements,
WindowManager._startSwitcher() will call SwicherPopup.destroy(), which
will try to disconnect signal handlers, destroy actors etc. Now if the
constructor can't finish creating the popup, some of the functions
called from _onDestroy() will fail and throw errors.
One of those cases is when window-switcher is limited to the current
workspace, and a WindowCyclerPopup is initiated on an empty workspace.
Because this._highlight hasn't been created, _onDestroy() will fail when
trying to destroy the actor of this._highlight.
Also, the actor of this._switcherList will not get destroyed in case
show() returns because this._items is empty. For example, this will
happen when a new AppSwitcherPopup is initialized with at least 1
running app, but 0 windows on the active workspace.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/168
When pressing the menu key to show the popupMenu inside a ShellEntry,
the menu is currently aligned with the end of the entered text, this
causes a bug in case the text is overflowing the width of the entry: The
menu will be shown outside of the entry field, because it's aligned with
the (invisible) end of the text.
Fix that by simply aligning the popup menu with the cursor of the entry,
which is a behavior that makes sense when pressing the menu-key anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/934
`MessageDialogContent.messageBox` is not really needed and was only
needed to show icons, which is now no longer supported. The styling can
also be done using other CSS classes and this makes it a bit more
straightforward to add actors to the MessageDialogContent.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/886
Since MessageDialogContent.messageBox is going to be removed in a
subsequent commit, move the parts where it's used out of messageBox and
into the contentLayout instead. This will introduce wrong spacings in
some dialogs, which we're going to fix when implementing the redesigned
individual dialogs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/886
Since the last commit we set the gicon property of StIcon to NULL if an
empty string was given when setting the icon name, this means
`st_icon_get_icon_name()` will return NULL instead of an empty string.
When `getIndicatorIcon()` returns an empty string, the icon_name
property will now be set to NULL, so compare it to NULL here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/888
Animating the icon spring using the `translation-x/y` properties instead
of the `x/y` properties avoids relayouts. There are still other non-icon
actors moving, but it's a big improvement.
Before: 595 relayouts per spring
After: 94 relayouts per spring
Reducing relayouts reduces reallocation, which reduces CPU-intensive
JavaScript execution.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/926
String.prototype.substr() doesn't support a negative length value
(to subtract from the full length), so we end up with a filename
of '' when hitting that code paths (a relative filename with '.png'
suffix).
Fix this by switching to String.prototype.replace() instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2091
Replace existing panning and touchpad scrolling by SwipeTracker.
Since SwipeTracker only references one actor, redirect scroll events
from page indicators to the main scroll view.
Change programmatic scroll animation to use easeOutCubic interpolator
to match the gesture.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/826
Add a unified swipe tracker supporting dragging, four-finger swipe on both
touchscreen and touchpad, and touchpad scrolling.
The shared logic is largely same as the one in WebKit and libhandy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/826
Commit 24e631ffe2 changed the shield animation to use translation
instead of position.
However once the shield is raised, only an animation will lower it
again, which means the shield is missing when it's supposed to be
shown without animation (for example after an idle blank).
Fix this by resetting the translation-y property in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/927
Together with the forecast icon, the temperature label is the most
important information in the weather section. To emphasize it more,
reduce its space requirement by removing the temperature unit, then
make the text bold.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1143
Since commit 90a08ba0b6, we only open a network secret dialog immediately
in response to user action, and show a notification otherwise.
While for the actual request VPNs are handled separately from other connections,
this isn't true when we show the notification - we need to handle 'vpn' together
with the other types there, or we fall through to the default 'invalid type'
exception.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2008
Now that both ThumbnailsBox and WorkspacesDisplay use single adjustments for
controlling indicator and scrolling, create the adjustment in OverviewControls
and pass it to both objects, effectively syncing indicator to scrolling.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/821
Instead of having a scroll adjustment in each WorkspacesView, and using the
one from primary screen in WorkspacesDisplay, have just one adjustment in
WorkspacesDisplay, and sync the changes between WorkspacesView.
This will allow to share the adjustment between WorkspacesDisplay and
ThumbnailsBox in the next commits.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/821
Instead of using the 'y', which queues a full relayout and
thus forces effects to be reapplied, use the 'translation_y'
property, that doesn't force relayouts and allows a future
blur effect to actually use the cached framebuffers a lot more.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/864
In an earlier iteration of the ease patch set, animatable properties
and easing parameters were different arguments.
This wasn't the case in the final version, so remove the left-overs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/917
We don't want the icon to fill extra space, so set the alignment
accordingly. Otherwise we get an unexpected result when adding
a background just to the icon part (as far as I can tell: just
system-action-icon).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/909
The screenshot code has a fair bit of nested callbacks, which means
that it is a good use case for async functions and Promises.
Most code uses GIO's async pattern, which means it can be easily turned
into promises with Gio._promisify(); first handle the couple of cases
that need custom code though, starting with SelectArea.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/903
Some GrabHelper uses are in the form:
doPreGrabStuff();
this._grabHelper.grab({
onUngrab: () => {
undoPreGrabStuff();
},
});
A promise-based variant allows to write this more cleanly as:
doPreGrabStuff();
await this._grabHelper.grabAsync();
undoPreGrabStuff();
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/903
We currently handle the case where the indicator itself is disabled
(read: hidden), but not when the entire top bar is invisible (for
instance when the primary monitor is in fullscreen state).
It is odd to pop up a top bar menu without the top bar, so check for
the indicator's mapped- instead of visible state.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2002
Use the new StPasswordEntry for password entry fields
and remove all direct handling of clutter text of the entry
via clutter_text_set_password_char to show/hide the password
text. StPasswordEntry will provides a peek-password-icon which
will allow to show/hide the password present in the field to
the user in subsequent commits.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/619
shellEntry should not need to query the clutter-text directly
in order to know if the entry is for passport-input purpose.
shellEntry can easily determine a password-entry by querying
if it is an instance of StPasswordEntry and use it's API
whereever relevant.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/619
This is necessary to make DnD operations work from tablet devices on
wayland, as it's not the same onscreen pointer sprite than mice. Fixes
window DnD in the overview on tablet devices, no longer having them stick
to the wrong pointer.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/897
Since commit 87e60ed97843, geoclue no longer pretends that authorization
is useful for system-installed apps (as they can easily lie about their
ID). Unfortunately this broke our auto-location support in case Weather
is installed non-sandboxed, as we are waiting for an authorization that
will never happen.
Unbreak it by only requiring authorization when installed as Flatpak.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1823
Just like switcher popups, popup menus don't play well together with
system modals, and generally have a lower priority. So just like
switcher popups, close popup menus when a system modal dialog pops
up.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1536
As system modal dialogs may open without user interaction (for instance
polkit or network agent requests), it is possible for them to pop up
while the app/window switcher is up.
The current result of having both up simultaneously is clearly broken,
so we can either dismiss the popup or prevent the modal dialog from
opening. Assume that the dialog indicates a more important action and
should therefore take precedence, so go with the former.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1536
Since both the `_items` object and the `_allItems` array include the
same items, the difference between those variables seems unclear. The
real difference between them (except the different data type) is that
`_allItems` is ordered in the same order as the visible grid, so rename
`_allItems` to `_orderedItems` which makes that more obvious.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/799
We have three interactions with an extension's prefs module:
- we import the module
- we call its init() hook
- we call its buildPrefsWidget() hook
The first two are one-time actions where we expect most getCurrentExtension()
calls (local imports, initTranslations() etc.).
However it's still possible that the extension will use the utility function
in buildPrefsWidget() as well, either directly or via other functions like
getSettings(): Make sure getCurrentExtension() returns the correct extension
in that case, not the last one whose preferences were initialized.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/873
The icon grid currently sorts icons by their names. When creating new
folders, the folder may end up being in a different page, and that's
confusing since we don't actually move to where the new folder is.
Move the icon grid to the newly created folder.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/883
We want extended keys to have the same size as their parent key,
but this is currently broken and the keys end up with their
parent key's preferred size (which is smaller than its allocated
size).
This is due to the way ClutterActor's width/height properties work,
which only return the "real" (i.e. allocated) size when the allocation
is valid, and fall back to the preferred size otherwise.
As changing an StWidget's hover state involves adding or removing
the `:hover` pseudo class, this is currently always the case.
Creating the extended keys first means the keyButton's allocation
is probably valid, so do that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1976
Mutter and Clutter was changed to pass around the current target
framebuffer via the paint context instead of via the deprecated Cogl
framebuffer stack.
The framebuffer stack has also been removed from Cogl so change to use
the one in the paint context instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/827
While still leaving them unused, pass around ClutterPaintContext and
ClutterPickContext when painting and picking.
The reason for splitting this change up in two is to make it possible to
bisect easier in between the API change and the change to using the
framebuffer passed around with the temporary contexts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/827
When commit c6cea277e replaced Shell.GenericContainer, the check
whether the required width exceeds the avilable width was changed
from using the minimum widths of items to the natural width of the
scroll view.
That doesn't work correctly, as the *natural* width may well exceed
the actually used width: SwitcherList bases its width request on
children's minimum sizes to force labels to ellipsize.
Fix this by using the minimum width of the scroll view's child instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1834
It is true that delete is a javascript keyword, but that doesn't
prevent it from being used as method name - there are event built-in
types like Map or Set with delete() methods!
So if that hack was ever needed, this hasn't been the case for years
now; just removed the hack now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/862
When the extension system is loaded, create the
gnome-shell-disable-extensions file in the users runtime directory. This
file is automatically removed 60s later. The sole purpose of this file
is to be consumed by the systemd units. If the file exists, the systemd
units will disable extensions when the gnome-shell fails.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/858
The whitelist is a list of well-known D-Bus names, which we then search
for the unique name we get from the method invocation - unsuccesfully.
Fix this by watching the bus for any name in the whitelist in order
to maintain a map from wel-known to unique name that we can use for
matching.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1916
Since the notification message close button had no border, or mouse
over effect, there was no way to determine whether the mouse cursor
were over the button.
Improve this by adding a message-close-button class for the close
button, and a styling for its hovered state, based on media control
button styling.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/855
Currently when dragging an icon to the space above or below the appGrid
to switch pages, we do so very quickly without checking when the last
page-switch happened. This makes it hard to move icons to pages which
are not the first or the last one, since the other pages are skipped
very quickly.
To fix this, add a timeout of 1 second that blocks switching pages after
a page-switch using drag overshoot occured.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1693
We currently always switch app pages when a dragged app icon
moves outside the grid boundaries, regardless of any previous
page switches. This makes it too easy to switch multiple pages
accidentally, so add a small threshold that the icon has to
move back towards the grid before allowing another page switch.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1693
There's no need for a `inhibitEventBlocker` interface. Since we connect
to "open-state-changed" of our folders in the AllView anyway, we can
just make the event blocker visible while a folder is opened, and hide
the event blocker during DnD.
This allows keeping the eventBlocker reactive at all times and fixes an
issue where DnD to create a new folder is impossible if no folders are
present because the eventBlocker would not get inhibited.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1652
Emitting ::drag-end after changing the slider value via arrow keys
was a cheap way to make the sound feedback work for keyboard input.
But now that the volume indicator plays the sound on ::value-changed
as well, we can stop doing that - after all, key presses aren't drags.
Besides that, this will make the limiting of feedback to actual volume
changes from the previous commit work for key events as well.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
gnome-settings-daemon doesn't play the volume change sound when
the volume stayed the same (that is, it is already at its maximum
or minimum). This looks like the right thing to do, so copy its
behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
Commit 8d4855f100 accidentally removed the volume change feedback
for scroll events. Add it back to be consistent again with moving
the slider via arrow keys, slider drags/clicks and gsd's media keys
handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/53
While those should be concise enough to fit, they may not where
temperatures drop into double-digit negatives. It seems better
to accept some awkward horizontal scrolling in that case than
shorten relevant information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1926
Commit b779f6f728 added a check to filter out invalid weather forecasts.
However the check is currently done when creating UI for the forecasts,
which means we end up with fewer forecasts than we could display if any
forecasts are invalid.
We can avoid that issue by checking the validity while collecting the
forecasts, so do that instead.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
We currently always start with the current weather info, then append
forecasts. This is slightly confusing, as the only hint that the
first item is special is the past (and potentially "odd") time.
Stop doing that and base all items on forecasts.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
As we get closer to midnight, we show fewer forecasts than we could
fit, or none at all. It makes more sense to continue the forecasts
into the wee hours in that case, so only exclude past forecasts,
but not ones from following days.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Weather stations can have unwieldy long names, which don't fit the
limited space we have available. City names are usually more suitable,
so use the name of the nearest city instead if possible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
In case of a very long location name, the label may take up all
available space. Make sure there is at least some spacing between
header and location in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
The two labels use different font sizes, so they don't align properly.
Unfortunately we don't have BASELINE alignment in Clutter, but at least
END comes closer than the default FILL.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1927
Commit c899453800 lifted the requirement of switcher keybindings
to contain a modifier, however it is currently only possible to
finish it by letting it time out.
Improve that by also accepting space/enter key presses to confirm the
selection immediately.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1883
The noModsTimeout obviously finishes inside a timeout callback, which
means `global.get_current_time()` might return Clutter.CURRENT_TIME (ie.
0) when called inside it, because it's not called while handling an
event. This means when switching apps or activating a window, the
timestamp passed to `activate_window` may be 0, which is the reason why
the altTab switcher is currently broken when using modifier-less
keybindings.
Fix that by using `meta_display_get_current_time_roundtrip`, which
always return a valid timestamp, instead of
`shell_global_get_current_time`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/847
Remove setCurrentPage() function, introduce setCurrentPosition() instead,
which allows to have fractional positions.
Make inactive dots smaller, filled and partially transparent, as opposed to
larger and fully opaque active dot. Make dots smaller overall, remove
borders. Interpolate each dot between active and inactive state based on
scroll position.
Make it impossible to "uncheck" the active dot.
Thanks Florian Müllner for parts of the code.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1932https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/843
We slightly delay showing the switcher popup to avoid flashing it
briefly in the common case of quickly switching back-and-forth
between two windows.
However some users perceive this delay as slowness. Address this by
showing the popup immediately when another key press is consumed
(that is, a key like Tab is pressed).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1928
Since the mpris implementation of the notification tray supports showing
multiple notification (one for each player), it doesn't make sense to
have only one global property to store the message, since that only
allows referencing one message at a time.
Instead, handle the MediaMessages completely inside the scope of
`_addPlayer()`, this should allow showing more than one message again,
which broke with commit 4dc44304df [1].
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/791https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
Because the message actor could also be undefined or a already
deallocated ClutterActor, we sometimes fail to show the error message
and get an error from Gjs instead.
So make sure we always log the proper error message and just leave out
the actor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/833
It may happen that the app icon is destroyed with a drag
monitor still around, in which case, a load of warnings
will be shown.
Make sure to remove any pending drag monitor on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
When removing the last icon of a folder, FolderView first removes
the folder from org.gnome.desktop.app-folders.folder-children, then
proceeds to reset all its keys, which removes the relocatable schema.
That order of operations turns out to be problematic. Removing the
folder from 'folder-children' destroys the folder icon, which in turn
destroys the folder view, which throws a load of warnings in the
journal.
Fix that by removing the folder after resetting the schema keys. In
fact, what we're doing here is not using 'this' anymore.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The variable that holds the list of application icons is
called 'newApps', but that technically was never true,
since we only create new app icons when necessary.
Rename it to 'appIcons'.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/841
The views (AllView and FrequentView) build a list of all applications
they contain. BaseView then diffs between what's currently added, and
what needs to be added, and removed.
This approach has a problem though: creating an AppIcon or a FolderIcon
connects to various signals, and we confuse the garbage collector.
When building the list of applications, instead of always creating new
icons, try to use already existing icons first.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1610
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1694
GWeather.Info.get_value_update() may indicate that the forecast is not
valid, or it may return a timestamp of 0 to indicate the information has
never been updated. In both of these cases, skip creating a widget for
it, as the information will not be accurate.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
If the clock is set to 12h, the AM/PM in the weather forecast times
should be clear from the context, because they are the immediately
following hours. This makes it less likely that the times will be
ellipsized (in which case the AM/PM wouldn't be shown anyway.)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
While we support a reasonable list of layouts nowadays, we don't
include many variants like `fr+oss`. Instead of directly falling
back to the `us` layout, try stripping the variant first, as the
base layout is likely closer to the expectation than `us`.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1907
When cancelling the PolkitAgent session before disconnecting the signal
handlers, we receive a "completed" signal where `gained_authorization`
is set to FALSE, which means we show an error message inside
`_onSessionCompleted()`.
This in turn means we show an error message every time we cancel a
session. In practice this wasn't really relevant so far since we only
destroyed the session when an actual error occurred before. Now that the
dialog supports empty passwords, we also call `_destroySession()` when
the user changes and no longer has a password set, and in this case we
want to cancel the current session without showing an error message.
So to fix this, disconnect the signal handlers before cancelling the
session, which makes sure we don't receive the last "completed" signal
in case we cancelled the session ourselves. This change also allows
removing `this._wasDismissed`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
When a user has no password and a polkit authentication is started,
instead of blindly initiating the admin session, show the regular
"Authentication Requested" dialog (but without the password entry). This
makes sure that the user's admin session is only effectively started
after the user chooses to proceed with the authentication, which
provides an extra confirmation step that can be vital for critical
tasks.
To do this, we show the dialog inside `_onUserChanged()` right after the
dialog was created instead of calling `performAuthentication()` from
`_onInitiate()`. The bug mentioned in `_onInitiate()` is no longer an
issue since we show the dialog in all cases now anyway.
Ideally we should use a different wording than "authentication" when the
user has no password set, and use "confirmation" instead. However polkit
already sends the requests with such messages (e.g. "Authentication is
required to configure software repositories"), and it's important to
show those to the user, so this patch keeps the regular wording.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/829
Since `_destroySession()` is not only called before we try to initiate a
new authentication session with Polkit, but also when the dialog is
closed, it's currently possible that key focus is grabbed by the close
button after the dialog was dismissed and hidden. This is causing a bug
where after dismissing one of multiple queued dialogs, key focus goes
away and keyboard navigation with the new dialog is impossible.
Fix this by only resetting the UI of the dialog if the dialog is still
opened/visible at that point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/828
Just as with c35b4cede5, there's no
default vfunc implemented by any parent which causes gjs to crash when
trying to call it.
So return EVENT_STOP if the key press successfully toggled the button,
and EVENT_PROPAGATE otherwise.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/830
Modifying variables from an outer scope in functions created in a loop
is considered problematic by eslint, because the variable value in the
resulting closure is often not what the coder intended.
In this particular case however, the scoping is correct, so add a comment
to disable the rule locally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/818
The FolderView class is responsible for creating the 4-item
grid of the folder icon, with the preview of the first four
apps inside the folder.
However, with the deprecation of StAlign as child properties,
the folder icon stopped being horizontally centralized.
Center the folder icon horizontally again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/817
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
If an else block only contains an if statement, the two can be
combined into an if-else block, which cuts down on indentation
and usually helps legibility.
There are exceptions (for instance where the outer if and else
blocks are mirrored), but where it makes sense, change the code
to avoid lonely ifs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
Nesting functions can be helpful for private helper functions, but
here they are accessing some variables from the outer scope and
shadowing others. Split them out to avoid any ambiguity.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
The event blocker in AllView is responsible for stealing click events
from the icon grid and closing the folder popup. The event blocker is
kept unreactive when no folder popup is visible, and it's made reactive
as a response to the 'open-state-changed' signal.
Using this signal, though, is problematic. When opening an app folder,
the icon grid first opens space for the folder to fit in; during this
period, it's possible to click on another folder icon, and break the
icon grid state.
Make sure the event blocker is reactive immediately after clicking on
a folder icon.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1470https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/816
Objects implementing EventSource should have some mandatory methods and
properties, we can ensure this by defining an EventSourceBase abstract
class.
So inherit EmptyEventSource and DBusEventSource from it making sure that
they implement all the needed methods, using native properties and
replacing the 'notify::*' fake signal emissions with proper object
notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Use GObject based objects for ModemGsm, ModemCdma and BroadbandModem.
This allows to define a base class that we can use to natively define
properties and notify property changes.
We can now remove the "fake" notify signals with proper properties
notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Animation background is just wrapping a native GnomeDesktop BGSlideShow
object, so instead of using composition we can now just inherit from the
native GObject, re-using native properties when possible, and avoiding
to keep an extra wrapper to the bg file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
Resizing effects are more finicky as other effects, as the actual
animation is delayed until we receive the ::size-changed signal.
However that signal may never be emitted if the window is destroyed
just after starting the size-change effect, in which case the effect
is never completed, blocking mutter from destroying the corresponding
window actor.
Address this by tracking when a resize effect is pending, and complete
the effect when appropriate.
https://gitlab.gnome.org/GNOME/mutter/issues/655https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/815
In the xwayland-on-demand scenario, it may happen that Xwayland is
shutdown (causing a restart of ibus-daemon to drop ibus-x11) while
we are typing.
If we have a bit of bad luck, this will cause the IBusInputContext
to be disposed (due to its bus "closing") at a time when we have
an ibus_input_context_process_key_event_async() request on the fly.
As the object is disposed in between this would tickle JS (rightfully
complaining that it's been disposed under its feet) and make us pass
an actually NULL IBusInputContext to the corresponding _finish()
function (despite the IBusInputContext being still held alive by some
other refs). This will assert and abort in
ibus_input_context_process_key_event_async_finish() then.
To handle this, listen for IBusInputContext::destroy, and reset our
internal state, this way we can compare on the JS side that the
IBusInputContext is indeed an up-to-date one.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/813
I've observed that UPower can occasionally report a charge level of 100%
while the state is still "charging". This usually doesn't last very long
but it is noticeable because the power icon changes to a "missing icon"
icon. This will handle that rare case correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/814
Clutter originally cluttered its namespace with key symbols, before
prefixing all symbols with KEY. We still use the unprefixed symbols
occasionally, replace them so mutter can drop the deprecated symbols.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/808
Since polkit takes a few milliseconds from initiating the session to
emitting the "request" signal, don't introduce visual distraction by
hiding the password entry and showing it again a few ms later.
So start a timeout of 200 ms when we destroy a session and if no session
request (i.e. a request for a password-authentication) happened during
this timeout, hide the password entry.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Since we don't know if polkit/PAM will request a password (emitting the
"request" signal) or use another authentication method like a
fingerprint after the current authentication failed, hide the password
field and make the "Authenticate" button insensitive after cancelling
the session, just like we do when creating the dialog.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Set the key focus to the password field only after we got a request
(and therefore know that a password is requested) instead of using
`setInitialKeyFocus()`. This way we don't try to focus the password
field by default if we aren't showing it (e.g. in case the user has no
password or is using fingerprint login).
Also we have to move the call to `grab_key_focus()` to happen after
`_ensureOpen()`, because otherwise the ModalDialog will set the focus to
one of the buttons while opening itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
Show the user avatar for all users, including the root user. The root
user will always have the generic avatar, but it looks more consistent
than showing no avatar at all.
This way we also don't have to worry about the spacing introduced by the
polkit-dialog-user-layout CSS class, which would give the
"Administrator" label a small offset to the left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/788
xgettext got better at recognizing template strings, so we can
replace more string concatenations. Alas xgettext is still buggy
(surprise, regular expressions are hard), so there are still a
handful of holdouts that prevent us from making a complete switch.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
Every since commit aa394754, StBoxLayout has supported ClutterActor's
expand/align properties in addition to the container-specific child
properties. Given that that's the only container left with a special
child meta, it's time to fully embrace the generic properties (and
eventually remove the child meta).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/780
This wasn't added on the GObject-ification in commit c4c5c4fd5c. This
introduced warnings and misbehaviors when closing the dialog. (Eg.
pressing the "show OSD" pad action would show stack different dialogs
on top each other).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/800
It seems like some recent change (maybe the move to a ClutterActor
subclass for AppIcon) broke the check whether the drag source is an
instance of AppIcon. While the drag source indeed is an AppIcon and
everything else works correctly, the check still returns false, which
breaks the creation of new folders using DnD.
Theoretically it makes sense that this doesn't work, because we're
assigning AppIcon using `var AppIcon =` and that will only get set after
`GObject.register_class()` finished, so accessing `AppIcon` inside that
function seems risky and is probably wrong.
Fix this by comparing to `this.constructor` instead of `AppIcon`, which
works fine and we know for sure exists at this point.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/794
I have observed a client in the wild (Chromium again) set CanPlay to
false momentarily while it is loading the next song. Previously, the
code would close the player proxy in that case, meaning that after
playing one track, the MPRIS message would disappear and never come
back.
However, I think this use of CanPlay, while apparently not usual, is not
incorrect according to the spec. We should hide the message instead of
closing the player proxy.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1362
In the wild we have buggy clients (notably Chromium 77 and earlier) that
send metadata with the wrong types. Previously, this would throw an
exception and prevent the MPRIS information from showing up in the
message list.
This changes the code to check if any incoming metadata is of the type
it is expected to be, and logs a warning if not, then continues on with
a default value.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1362
Make gjs to compute the GType name for registered GObject-derived
classes using the file basename and the first directory name, so that we
can avoid name clashing, and ensure that no extension will break the
shell by registering a name that is already used (by the shell or by any
other extension).
This requires gjs commit 02568304 [1] that will be part of release 3.35.2,
so bump the required version as gjs does post-release version bumps.
[1] https://gitlab.gnome.org/GNOME/gjs/merge_requests/337https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/790
Similar to the previous work-around, xgettext gets thrown off by
embedded quotes in template strings, in particular where a template
"breaks up" a pair of quotes.
Throw in some more comments to make xgettext happy, but whoever makes
the gettext toolchain not depend on fragile regular expressions will
be drowned in beverages of their choice ...
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
Xgettext learned about template strings now, which is good. However
it's still buggy, so instead of the "classic" xgettext issue with
backticks, we now have exciting new issues to find work-arounds for.
One issue is that it doesn't detect backticks inside string constants
as regular characters, so having an odd number of backticks throws off
its regex.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
This corrects weird-looking blending visible as it fades out when the
overview closes. Previously the entry's dark background would drown out
the text as it fades out, but now they maintain a consistent contrast ratio
during the fade.
There's no noticeable change in performance, but in theory it should be
faster as text entries don't change at full frame rate. So stage redraws
will usually have a cached searchEntry drawn and require less effort.
Though the main purpose here is to correct the appearance.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/778
The close dialog is added as a child to MetaWindowActor, and, in Wayland
sessions, since commit [1] MetaWindowActor applies a transformation
matrix which scales all it's children using the geometry scale factor.
Now because the dialog actor is not a window (i.e. a MetaSurfaceActor),
but a subclass of StWidget, the scale factor is also applied to the
properties of the dialog by StThemeNode, so we end up applying the
geometry scale twice to the close dialog.
Fix this by applying the inverted scale to the dialog, which leaves the
scaling only to MetaWindowActor. This means we also can't apply a pivot
point other than 0 to the dialog actor, so apply the 0.5-pivot point to
the `_dialog` child of the Dialog class (the actual visible dialog box)
and also perform scaling animations on this child.
[1] https://gitlab.gnome.org/GNOME/mutter/commit/fb9e8768https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/783
Remove all transformations from window actors after a window animation
was either cancelled or finished. Right now we only do that if the
transition finished successfully, which seems kind of pointless (it can
probably be historically explained because the callbacks inside the
"kill-window-effects" signal handler are connected to those
`*WindowDone()` functions though and the `*WindowOverwritten()`
functions were only added later in [1]).
This fixes a recent regression where a window animation would get
cancelled and remain stuck by switching workspaces. The regression
probably happened due to different behaviour of the `onOverwritten`
callback of Tweener and the `onStopped` callback of Clutter transitions:
For the workspace-switching animation the window actors get reparented
to a temporary container, which makes Clutter transititons emit
"stopped" (`clutter_actor_remove_child_internal()` stops transitions on
its children), while Tweener would continue the animation.
[1] 6dd302e5cehttps://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/784
Some vfuncs like `button_press_event`, `button_release_event` and
`touch_event` don't have handlers in the parent classes of
PopupBaseMenuItem. So don't call those handlers and return the default
Clutter.EVENT_PROPAGATE there.
This fixes a crash of the shell that happens when pressing a mouse
button inside the system popup menu and releasing it above a slider like
the volume slider again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/787
We currently only update the windows section when either the focus app changes,
or when the app's windows change (that is, a window is opened or closed). This
allows the menu item labels to become stale if the window title changes after
one of those events (for example when switching tabs).
Fix this by updating menu items when the corresponding window title changes.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1830
g_desktop_app_info_get_categories() may return null. In that case, the
previous code would fail to create a folder when dragging an app with
no categories onto another app. Instead, simply continue with the next
app info.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/782
In the case of bugs in a drag target's acceptDrop() function, it may
throw an exception. In the previous code, this would break out of the
loop entirely and never cancel the drag, so the mouse button release
event would be ignored and you would have to press Esc to get out of the
drag.
In this change, if acceptDrop() throws an exception, we log it and move
on to the next parent target instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/777
Those are two useful ClutterTimeline properties and
will be needed for wiggling the search entry when
failing the password.
Add support for passing repeat-count and auto-reverse
to ClutterActor.ease and ClutterActor.ease_property.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/768
When accessing properties on ClutterActor for size and position there is
a notable access time overhead. This overhead adds considerable user lag
when opening the overview if many windows are open.
This is primarily due to these properties being accessed while sorting
WindowClone instances by their window's center for placement in the
overview. By pre-computing this center value only once when
initializing WindowClone, the induced lag can be significantly reduced.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/763
Overview's animationInProgress, visible and visibleTarget properties are not
meant to be modified from others, but be read only.
So make this clearer using properties getters and private values.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Instead of manually updating properties on change, use native properties
bindings to keep the them synchronized.
Disable hover-tracking and focus-ability when the avatar is not sensitive.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Now that the calendar message list and the message sections are actors, there's
no need to keep track of the sections in a different Map as we can just use the
native clutter functions to manage the children and access to their properties.
Also cleanup the signal connection/disconnection.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When messages are added to the message list, we create a container for those,
however since now the messages are actor themselves we can just create a list
item actor that holds the message actor and refer to the message parent in order
to get their container.
This allows to remove the obj container map we used, using the native clutter
parent-child hierarchy and handle signal connections cleanly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Since all the search result classes are now GObject classes, we can enforce
the methods we want to have in there (just activate() for now) using an
interface, to make sure they are implementing what we require and to easily
group all the classes that can be used as search results, even though they
are not extending SearchResult.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Remove the `this.actor = ...` and `this.actor._delegate = this` patterns in most
of classes, by inheriting all the actor container classes.
Uses interfaces when needed for making sure that multiple classes will implement
some required methods or to avoid redefining the same code multiple times.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Dispose the Source Object when dispose() is called, avoiding that it could be
called twice on a destroyed Source.
So, notify count changes before destroying the object, and don't emit this
twice on destroyNonResidentNotifications (as if a notification is destroyed
the property notify will happen in the notification destroy callback anyways).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When the notification is destroyed we should also dispose the underneath GLib
object, and ensure that we don't dispose this twice.
In order to avoid this, don't destroy transient notifications that have been
already been removed and only destroy the resident notifications on activation
if they have not been destroyed earlier.
Thus connect after to the 'activated' signal and once the default handler has
been called destroy the notification if not requested earlier.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
The Keyboard class used to be both a view and controller class, however in order
to make the keyboard a native Clutter.Actor, we need to separate the widget from
the controller class, so that we can manage the actor lifetime from the JS side.
Thus, initialize the keyboard actor on the Keyboard constructor and create a
KeyboardManager class to manage its state and lifetime.
Add proxy methods for the public functions that were used by other shell
components
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Meta.Background has already a 'changed' signal and not to confuse the source
signal with the wrapper one, rename the wrapper class signal into 'bg-changed'.
This will be relevant when we'll inherit from Meta.Background, as signal
emissions from the base class could interfere with the wanted derived class
behavior and with the the grouping of successive changes into a single ::change
emission.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
When the screen is marked as idle, we normally start a fading animation and
a timeout to finally lock the screen. This timeout is configured using the
fade time if no longer delay is set in settings.
However if animations are disabled or slowed-down/up, the fade time is
different from the STANDARD_FADE_TIME and so we might end up showing the
lock shield without actually locking for STANDARD_FADE_TIME in the disabled
or slowed-up animations case, or locking too early in case of slowed-down
animations.
So, just adjust the timeout time using the same logic of animations so that
this value is matching all the times.
Related to https://gitlab.gnome.org/GNOME/gnome-shell/issues/1744https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/749
Devices like cameras and microphones are privacy sensitive, as they can
be used to spy on the user. We cannot prevent non-sandboxed apps from
doing that, but as we already track when the microphone is recording,
we can at least show an indicator to make sure it doesn't happen behind
the user's back.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/729
Search result views can include also objects that are not inheriting from
SearchResults (such as the AppIcon) that has not any 'activate' signal, to
connect to. Since we want to enforce a more formal interface, we want to
have just a simpler requirement as an activate() method.
So, instead using the 'activate' signal in SearchResult to activate a result
via SearchResultsBase just implement activate() in the result.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/765
When a transition is set up with a delay, it may be removed before it
actually started. We won't get a ::stopped signal in that case, with
the result that we currently end up with a mismatched unredirection
disabling.
Address this by only disable unredirection once the transition has
actually started.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1788
gnome-session used to show a dialog in this case, but a
notification is more natural nowadays. Doing it in gnome-shell
avoids complicated synchronization between gnome-session and
gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=701212
We share this actor with other shell menus, which arguably track a different
"cursor" as we care of the caret/anchor text positions, and menus care about
pointer click coordinates.
Use a standalone actor for this, so popups/IM are entirely decoupled.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1571
If graphical applications want to start from systemd units, they need to
start after we're properly ready to display them. This is particularly
important under X where `_GTK_FRAME_EXTENTS` and other xprops are needed
to have the right theming.
We're doing this in an idle callback so that the dynamic starting of
`gnome-session-x11-service.target` (which launches `gsd-xsettings`) as
the result of a signal emission happens before us signalling we're ready
for later things to start.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/750
As per clutter optimizations in should_skip_implicit_transition() any
transition will be ignored if applied to an actor with unmapped clones.
Since we initialize the lightbox as hidden, when we use it standalone (as it
happens for the long fade in screenShield) the transition will be ignored.
This causes the lockscreen fade-out after the idle delay not to work, but
instead to have an apparently locked system that is instead not locked at
all.
So, just ensure that the lightbox actor is visible before applying to it any
transition.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1683
The shell tries to spawn the ibus daemon on startup if unavailable, however
as per commit 8adfc5b1 we also force restarting it once the X11 server is
available.
Unfortunately this could cause a race if we disconnect while we were already
connected to an ibus daemon, but still in the process of going through the
various nested calls.
In fact the ::disconnect callback didn't stop any further async ibus call
that, even if failing, would have eventually triggered the emission of a
'ready' signal and to the Keyboard's callback, leading under X11 to a full
grab owned by ibus daemon.
In order to avoid this and keep control of the calls order, use in both
IbusManager and InputMethod a cancellable that is setup before connecting to
the bus, and that is cancelled on disconnection.
Then handle the finish() calls properly, using try/catch to validate the
returned value, taking in account the potential error and just not
proceeding in case of cancellation.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1712
gnome-shell calls ibus_input_context_focus_in() in InputMethod.focus_in()
but the event is not actually forwarded to panels and engines in GNOME
Wayland because gnome-shell changes IBus.Capabilite by focus events and
disables IBus.Capabilite.FOCUS when ibus_input_context_focus_in() is called.
IBus.Capabilite is assumed a fixed value per input context in the
first place and it should not be changed by focus events.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/573
Unset the signal IDs we connected to when starting the drag. Otherwise
we get error messages if a touch drag is ended after a mouse drag
happened because the signal IDs are still set but no signals are
connected.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/740
The screen shield creates the unlock dialog based on the session mode.
However since commit 0c0d76f7d6 turned LoginDialog into an actor
subclass (while UnlockDialog kept using the delegate pattern), it is
no longer possible to handle both objects the same way without warnings.
Allow this again by turning UnlockDialog into an actor subclass as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/736
When easing, we need the transition of one of the involved properties
to connect our callbacks. Currently we simply get the transition for
the first property, however as Clutter optimizes the case where a
property doesn't actually change, that transition may be NULL even
though we still animate other properties.
So instead of only looking at the transition of the first property,
try to find a transition for any of the involved properties.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1572
The RenameFolderMenu uses the internal box as a menu item, while PopupMenu
expects to have PopupBaseMenuItem based children with a delegate set.
Instead of using a custom menu with a customized box acting as menu
item,just add a RenameFolderMenuItem that inherits from the parent,
adjusting the features as we need them. In fact, the rename folder menu item
doesn't need any label, padding or default styling so we can reuse
PopupMenuBaseItem after we use our styling properties and we set the
Ornament to HIDDEN.
To get the proper style in place, define rename-folder-popup and
rename-folder-popup-item to override the default popup-menu-item rule
padding instead of using margins.
Pass the menu item as menu's focusActor as this will key-focus it on pop-up,
by overriding the key_focus_in() vfunc we can then delegate the focus
handling to the entry's clutter-text.
Also override the map() vfunc in order to update the entry's content before
mapping the entry.
Finally, use the item's activate method in order to tell the parent menu
we're done with it and that the menu can be closed.
As consequence we can also remove the menu's popup() method, and just use
the default open().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
When the rename folder menu is opened the text entry is expected to be
focused and selected for a quick editing.
While this is required it doesn't actually happens since PopupMenu by
default gives the key focus to the source actor, that is then free to pass
the key focus to the menu if there's an user interaction.
In this case however, we want the text entry to be focused once we prompt
the menu, so just use the PopupMenu's focusActor property to ensure it will
handle it for us.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1604https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The PopupMenuManager is supposed to grab and focus the menu actors, with
normal menus we always need to grab the actual menu but set the key focus to
the source actor so that it will be able to move the focus to the menu
child, if requested.
However there are menus such as the RenameFolderMenu that requires the
key-focus once prompted, so provide a focusActor property (defaulting to the
sourceActor) that can be set in order to define the actor to give the
keyboard focus to, when the menu is popped-up.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1604https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
The menu item ornament is used to put dots or checks in menus or otherwise
to define a padding for a label.
However in some cases we want to create a menu item with no left (in ltr)
padding.
In order to do that, define a HIDDEN Ornament mode that completely hides the
ornament actor.
The naming here might be confusing as this should probably be called NONE,
while the default mode is the invisible one, but it's too late to change it
now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/720
While commit 3094f863 was intended to cancel the ongoing idle hide
timeout before we start a new one, a mistake slipped in there while
rebasing: Obviously we should check if the signal id is NOT 0 here.
This didn't prevent timeouts being started while old ones are still
running and did override `this._idleHideOverlayId`, which caused the old
timeouts to run indefinitely after an overlay actor was destroyed
because we fail early (and don't return TRUE) in `_idleHideOverlay()`.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/735
Indicate whether dropping an app icon was successful or not by using the
newly added `animateLaunchAtPos()` API of AppIcon which starts a zoom
out animation of the icon at the position the drop happened.
To get the position of the drag actor, we have to forward the arguments
passed to `acceptDrop()` and `handleDragOver()` to the internal drag
handlers of the WorkspaceThumbnails. We can use this position directly
without transforming it to stage coordinates because the actor is a
child of `Main.uiGroup` and the animation actor will also be a child of
this container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
Add a `animateLaunchAtPos()` method to the AppIcon class to animate the
launch of an app at a given position. This allows for a visual
indication of whether dropping an app icon using DnD was successful at
the position the drop happened in a later commit.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
Return the results of calls to acceptDrop that we forwarded to the
Workspace object.
This fixes a bug where app icons that were dragged and released above a
window clone would get animated back to their original position
(indicating that nothing happened) even though they opened correctly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
`AppIcon.shellWorkspaceLaunch()` can easily be replaced by checking for
`AppIcon.app` and calling `AppIcon.app.open_new_window()` directly.
For compatibility and to prevent breaking extensions implementing the
function, keep supporting the `shellWorkspaceLaunch` API in AppIcon
while logging a deprecation warning. Also keep supporting the API on
drag sources (without deprecating it) to allow extensions to define
custom actions on their drag sources.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
If the search entry does not have any text typed in and a button press
happens outside of the search entry, we set key focus to NULL to make
the search entry appear unfocused.
This is quite intrusive and can easily cause unwanted focus changes, so
change the captured-event handler to only call `reset()` if the search
entry actually is focused.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/683
Instead of returning and waiting until the old timeout is finished,
start a new idle hide timeout for the overlay when the pointer enters a
window clone. This makes sure the timeout for hiding the overlay after
the pointer left the clone mostly stays the same (except when leaving
the clone via the title or the close button).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/683
As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
Calling await in a loop means the asynchronous operations are
run sequentially instead of in-parallel. Usually that's not
what's wanted, so eslint has a rule to warn about this.
However here we use async/await to handle control back to the
mainloop between steps, so running operations sequentially is
actually intended.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
The intention of the code is clearly to operate on a copy, but that's
not how the Object constructor works. While it doesn't matter in
practice that we modify the passed-in object parameter, it's still
a good idea to fix the code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
The legacy indent rule currently ignores arrow functions in parameters
to allow callbacks to not align with the other arguments:
this._someFunctionWithFairlyLongishName(arg1, arg2, arg3,
() => {
this._someOtherFunctionWithLongName(arg1);
});
But as ignoring entire nodes means we can end up with arbitrary
indentation, we should drop the exception. While this would make
the above "illegal" under the legacy config, it conforms with the
non-legacy style, so everything should be fine ...
... except that eslint starts to complain about some function args
that should be fine under the legacy config. Maybe it's thrown off
by the function-arg-in-arrow-function-in-function-arg structure, but
rather than figuring it out, let's just move those to the new style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
Some more places where the indentation doesn't comply with either
the old or new style. They slipped through because the legacy eslint
configuration accounts for some patterns by plainly ignoring certain
nodes. We'll address that later, first fix up the indentation errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
When there is a transition, it's likely that we are animating some part
of the desktop, and in such situations we don't want to unredirect
fullscreen windows.
This fixes unwanted unredirection when e.g. hiding a modal dialog by
re-enabling the unredirection after the animation has finished, instead
of when it starts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/721
Updating the window list in the Looking Glass is a costly
operation: it destroys a whole lot of actors, and recreates
them. This triggers CSS changes, repaints, and allocations.
It is specially bad when paired with Wayland's big number
of window creations and deletions when showing Builder's
and Epiphany's popup window.
Only update the window list in the Looking Glass when it is
visible.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/556https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/719
Since ES5, it is possible to create objects with no prototype at all:
let foo = Object.create(null);
Those object won't have any builtin properties like hasOwnProperty(),
which is why eslint added a corresponding rule to its default rule set.
While this isn't an issue that affects our code, there's no harm in fol-
lowing the recommendation and call the method through Object.prototype.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
We currently use no less than three different ways of indenting
object literals:
let obj1 = {
foo: 42,
bar: 23,
};
let obj2 = { foo: 42,
bar: 23 };
let obj3 = { foo: 42,
bar: 23
};
The first is the one we want to use everywhere eventually, while the
second is the most commonly used "legacy" style.
It is the third one that is most problematic, as it throws off eslint
fairly badly: It violates both the rule to have consistent line breaks
in braces as well as the indentation style of both regular and legacy
configurations.
Fortunately the third style was mostly used for tween parameters, so
is quite rare after the Tweener purge. Get rid of the remaining ones
to cut down on pre-existing eslint errors.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/716
Since disabling an extension will lead to disabling and re-enabling all
following extensions in the list, always disable multiple extensions by
looping through the list in reverse order.
This lowers the execution time of the event handlers quite a bit if many
extensions are installed.
Thanks to Philippe Troin for identifying the problem and proposing the
initial patch to change the extension order when reloading.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/177https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Only push uuids of newly enabled extensions to the `_extensionOrder`
array if enabling them was successful.
Otherwise, since `_callExtensionDisable()` doesn't remove uuids that
weren't successfully enabled from the array, those extensions get added
to the array multiple times when they're disabled and enabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
It's currently possible to circumvent the `sessionMode.allowExtensions`
property: For already enabled extensions one can call reloadExtension
via DBus, for new extensions it's possible by adding the extension to
the enabled-extensions gsettings key and setting the
disable-extension-version-validation key (which triggers a reload of
`this._enabledExtensions`) and then calling reloadExtension via DBus.
So to enforce `allowExtensions` while still allowing to update
extensions and keeping the extensionSystem synced with various gsettings
keys, replace the checks for `this._enabled` with simple checks for
`Main.sessionMode.allowExtensions` inside `_callExtensionInit()` and
`_callExtensionEnable()`.
The remaining checks for `this._enabled` are only small optimizations to
prevent running code on irrelevant sessionMode updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Right now we're only handling added sessionMode extensions correctly on
sessionMode updates, also handle the other case and disable removed
sessionMode extensions on sessionMode updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Instead of only logging a message that loading the extension stylesheet
failed and silently returning we should use `logExtensionError` for that
instead. This also sets the extension state to ERROR and makes sure we
don't try to enable it again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
If the extension doesn't exist in the `this._extensions` Map, we'd try
to access `extension.dir` on undefined/null. So set the `dir` variable
after checking if `extension` is defined.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/96
Code and comment were based on the old get_input_rect() and get_outer_rect()
method names that were changed to the more appropriate get_buffer_rect() and
get_frame_rect() a long time ago.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/713
The animation was removed in commit 6a00a504d4 for consistency with
other menus. However commit a9b12d5d73 then *added* animations to
those just four minutes later.
So add back the original animations for consistency, both with menu
closing and with other menus.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1595
Remove transitions of the `slide-x` property of the layout manager
before we set the property to a fixed value, otherwise the transitions
might still be running and change the value after we set it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/707
When selecting an area for screenshot we monitor the events while we've valid
coordinates in order to redraw the rubber band.
However, we don't stop ignore the motion events after button release and so
while animating. This might cause an unwanted effect if moving the mouse away
during fade out that is way more visible slowing-down the animations.
To fix this ignore any motion event once we've set the results.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/711
Add a new popover with a regular entry + button to rename
folders. The layout is similar to other GNOME applications.
The popup is implemented as a PopupMenu subclass, leaving
the grab management to PopupMenuManager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/675
We disable and enable extensions inside the `notify::active` signal
handler, but we shouldn't do that in case the change didn't come from
the user but because something else changed the state of the extension.
This causes an issue when the extensionPrefs window is open and the
session gets locked: The extensions are temporarily disabled by the
shell, extensionPrefs updates its switches on the state change and adds
those extensions to the `disabled-extensions` gsettings key inside the
signal handler. Now when the session is unlocked again, the extensions
won't be enabled again since they're forced-disabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/705
We're using a vfunc override for `get_paint_volume` to exclude children
with an opacity of 0 from the paint volume and thus decrease the size of
the area we need to paint.
Now if the paint volume is requested during the spring animation (the
real icons are hidden using an opacity of 0 and clones are used for the
animation), `get_paint_volume` returns a paint volume with a height of
0. After that, the spring animation finishes and the icon-opacities are
set to 255 in `_resetAnimationActors`, and since we cache paint volumes
and there's no reason for Clutter to assume it got invalid, the icons
end up not being painted.
Fix this by queuing a relayout of the grid when the opacity of a child
is changed from or to 0, which manually invalidates the paint volume.
The reason why this is not an issue with the paginated icon grid
(all-apps view) is probably because StScrollView invalidates the paint
volume a lot more often than regular containers.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1502
Extensions might emit JS errors explicitly or implicitly, however GNOME
Shell doesn't present any stack trace for those making them quite hard
to debug.
Make this easier by logging errors with logError() whichs includes the
stack dump.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
When the GridSearchBase actor is destroyed we should remove the
ongoing later that might try to access to invalid resources.
To do this, add an _onDestroy() callback function to SearchResultsBase
and override it in GridSearchBase.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
Easing calls on show/hide functions have some parameters in common whether the
radial effect is enabled or not.
So instead of doing repeated calls with similar parameters, initialize common
values in params objects.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
If the resource scale or the scale factor changes while the animation
is playing, we need to stop the animation and start it again once the
texture is loaded, as the idle might try to access an invalidated
animation child otherwise.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/700
Commit 21e14bd46f fixed this for the
brightness slider, but we have the same problem for volume too. When the
volume is muted - for example in Settings or via a media key, we update
the slider to '0' to indicate this visually. But we also actually invoke
the slider's callback to *set* the volume to zero. That means that the
previous level is overwritten so it can't be restored when unmuting.
The fix is the same - when we update the slider internally ourselves,
don't call the signal handler.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1557
We now do 2 things along Xwayland startup/shutdown:
- Start or stop the gnome-session-x11-services target, that will
pull all X11 related services that the session might depend on.
- As we start ibus-daemon manually, trigger a restart in order to
toggle the XIM daemon on and off along with Xwayland presence.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
We may need to restart it with different arguments, so make it
possible to do that. Also, avoid to just restart it on _clear(),
this is now most likely through our --replace call than it is
through ibus-daemon eg. dying, avoids some noise in logs as
there is already an ongoing ibus-daemon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
An Endless OS system was found in the wild with a malformed
.local/share/gnome-shell/notifications which causes _loadNotifications()
to raise an exception. This exception was not previously handled and
bubbles all the way out to gnome_shell_plugin_start(), whereupon the
shell exit(1)s. The user could no longer log into their computer.
Handle exceptions from _loadNotifications(), log them, and attempt to
continue. Ensure that this._isLoading is set to 'false' even on error,
so that future calls to _saveNotifications() can overwrite the (corrupt)
state file.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1552
The updatesPermission is currently initialized synchronously, which
blocks the Mainloop for quite some time and therefore slows down startup
of the shell, let's do it asynchronously instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/689
Since we now put a short timeout in before the start of the actual pie
timer we don't start the timer as often as we used to. This allows us to
create a new PieTimer object each time a timeout is started and
therefore play a finish animation independently of other (new) timeouts.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
If the circle is complete and the pie timeout finished, we don't need
the lines to the center point indicating the ends of the pie anymore.
We just draw a clean circle instead, which allows for a zoom-out and
fade animation of the circle when we're done.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
If the pie timeout has finished successfully there's no need to cancel
the pie animation, instead we can just wait for that animation to finish
and show some visual feedback like a zoom-out animation to indicate the
click afterwards.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
Fade the pie timer in using a duration of 1/4 of the timeout and a
EASE_IN_QUAD animation. This significantly reduces flickering of the pie
timer while moving the cursor and makes the timer less distracting.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/688
gjs no longer has an implicit dependency on GTK 3.0, so without
requesting an explicit version, we will get the highest available.
Our code isn't GTK-4 ready, so request 3.0 explicitly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/686
Before the move to Clutters implicit animations with 0846238f6 and
bf497ed64, we used Tweener to do a fake-animation of the opacity and
Tweeners `onUpdate` signal to queue a repaint of the PieTimer everytime
Tweener tries to update the animation.
Now, with Clutters implicit animations, there is no `onUpdate` signal
anymore and also `notify::opacity` no longer gets emitted since the
value doesn't actually change. This lead to the PieTimer no longer being
repainted, which broke the animation.
Fix this by implementing the current angle of the pie using a custom
GObject property `angle` and animating this property using the new
`actor.ease_property` method.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1533
When cancelling the animations of the icon grid, right now we simply
destroy all the clones without resetting the opacity and making the
actor reactive again. So if the spring animation to show the grid is
cancelled by pressing a key to start a search, the icon clones would be
destroyed, but the icon-opacity would still be set to 0. Now if the
Escape key is pressed, viewSelector will show the last active page (ie.
the iconGrid) without a custom animation and only fade in the page, and
because the icons still have an opacity of 0, they will be invisible.
Fix this by always restoring the opacity and reactive property of the
original actors if the animation is cancelled instead of only destroying
the clones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/678
Since we set the proxy value when the slider changes and set the slider
value on proxy property changes, we run into a cycle.
Before commit 3d3dca4aa this was addressed by not notifying on all slider
changes, but only in reaction to direct user action. Given that since the
splitting out of the BarLevel class those events are handled in a subclass,
that approach is at least unconvential and fairly fragile.
Instead, make the brightness indicator ignore any changes to the slider it
initiated itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1500
With 8b368d010 we fixed a bug where the onComplete callback was always
called no matter whether the transition was interrupted before or not.
This exposed another bug: viewSelector depends on this behaviour when
fading out pages: After fading out a page, we call `this._animateIn` to
show the new page. Now if the fade-out animation gets interrupted, with
the correct behaviour of onComplete we end up not showing a new page and
the viewSelector remains empty instead. One case where this happens is
when pressing a key to start a search during the overview-animation.
Obviously we also want to show the new page in case the fade-out
animation was interrupted, so use the onStopped callback instead of the
onComplete callback here.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/674
An actor ease callback could destroy the actor, in such case we should do not
touch the actor anymore.
So, before calling the callback, reset restore the easing state and don't
perform any further action with it.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1507
When a drag is cancelled and the source actor
is visible, the drag actor is animated back to
the source position. The scale that the drag
actor will become is calculated as:
scale = this._dragActor.width / sourceScaledWidth
However, this is wrong; what we wanted to do
is the opposite:
scale = sourceScaledWidth / this._dragActor.width
Fix the scale calculation to match the math
above.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
Create a new folder when dropping an icon over another
icon. Try and find a good folder name by looking into
the categories of the applications.
Delete the folder when removing the last icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
Because the Dash icons are not drop targets themselves,
add a tiny DashIcon class, which is an AppDisplay.AppIcon
subclass, and disable all DND drop code from it.
Show a folder preview when dragging an app icon over another
app icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
As per design direction, scale and fade the app icon
when starting dragging it, and show it again if the
drop is accepted. Clutter takes care of animating the
rest of icon positions through implicit animations.
Scale and fade the dragged icon while it's being dragged.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/671
Since the `notify::allocation` signal will obviously get emitted while
the actor is inside an allocation cycle and we might end up doing
changes to its allocation inside `updateSearch` by hiding or showing the
actor (which queues a relayout), we get a warning from Clutter.
Fix this by delaying the call to the parent method until the next
redraw, which should happen a few moments after the current relayout.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/672
Since commit 1a27ff6130 we use the
allocation width of the GridSearchResults actor to calculate the max
number of results that can be shown for this search provider.
On the first run of the search, when no previous (cached) allocation is
available for the actor of GridSearchResults, the allocation width used
in `_getMaxDisplayedResults` will be 0, which in turn will make
`updateSearch` filter out all results returned by the search provider.
Now if this search provider is the only search provider that's enabled,
after calling `updateSearch`, the `SearchResults` class will call
`_updateSearchProgress` to check if any results are visible, assume
nothing was found and therefore hide the scrollView. This in turn causes
the GridSearchResults actor to not get a new allocation, which prevents
our code to fixup the max number of results on `notify::allocation` from
working: The number will continue to be 0 and we'll never show any
results.
To fix this regression, return -1 in `_getMaxDisplayedResults` if the
allocation width is 0 to inform `updateSearch` that we can't calculate
the maximum number yet and interpret a return value of -1 as "show all
results" in `updateSearch`. The same problem would probably also appear
if the allocation width is anything between 0 and the width of the
iconGrid with one icon in it, although this might as well be a valid
width in case a very small screen is used or with very large icons. So
let's only check for a width of 0 and hope the GridSearchResults actor
won't get weird temporary allocations in that range.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/672
Just as we animate the apps launch using the zoom out animation if the
'new-window' action provided by the app is launched, we should also show
this animation if the 'activate-discrete-gpu' action provided by the app
via its AppInfo is launched.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/673
For the "New Window" entry we add to the AppIcons popup menu we should
always animate the app icon if the menu entry is activated as it was
intended by commit 62786c09a8.
For the "Launch using Dedicated Graphics Card" entry we can also always
show the animation if the entry is activated since the entry should only
be visible if the app is stopped.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/673
Clocks has exactly the same issue as Weather: Its integration currently
relies on accessing its settings directly, which isn't possible when
the app is sandboxed.
Fix this the same way we did for Weather, by adding our own setting
and syncing it with the app via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
We add our own "New Window" menu entry if the app doesn't already
provide a 'new-window' action. For this menu entry, we show the zoom out
animation on the app icon when the user clicks the entry.
To be consistent in case the app already provides its own 'new-window'
action via its AppInfo, also show the zoom out animation when this
action is activated.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/662
As pointed out by designers, fading it signals that the
icon grid is not a drop target, when now it actually is.
Remove the fade effect applied to the icon grid when
dragging. Since this is the only caller of fadeIn() and
fadeHalf(), also remove these methods.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
App icons inside folders are already animated when the folder is
opened, but moving an app icon from a folder doesn't, making the
transition abrupt.
Fortunately, it's easy to detect icons that were previously hidden
but are not anymore.
Add an animation to these icons when showing.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
This is necessary for being able to drag application icons
to folders in different pages.
Add a drag motion handler to AllView and handle overshoots
when dragging. Only handle it when dragging from AllView.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
After dropping an application into the folder icon, the
list of applications is updated but the folder icon itself
is not.
Introduce BaseIcon.update() and call it from FolderIcon
when redisplaying.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
The event blocker is an actor that is added in between the
icon grid and the app folder popup in order to guarantee
that clicking outside the app folder will collapse it.
However, the next patch will require allowing dragging events
to be passed to folder icons, and the event blocker gets in
our way here, preventing drag n' drop to work properly.
Add an API to inhibit the event blocker. This API will be
used by the app folders while an item is dragged.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/664
When plugging in a device with sensors that are unsupported by
iio-sensor-proxy, the proxy may quit so fast that the name disappears
from the bus before we get to construct the SensorProxy in response
to the name-appeared handler, resulting in the following warning:
JS ERROR: TypeError: this._sensorProxy is null
_sensorProxyAppeared/this._sensorProxy<@resource:///org/gnome/shell/misc/systemActions.js:217:17
_makeProxyWrapper/</<@resource:///org/gnome/gjs/modules/overrides/Gio.js:243:21
Address this by creating the proxy unconditionally instead of monitoring
the bus name, and using the g-name-owner property to determine whether
iio-sensor-proxy is active.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1357
When transitioning to or from the overview, windows travel
a certain distance between their real desktop position and
their place in the overview window grid. The less this travel
distance is, the smoother, more polished, and less jarring
the overall transition looks. This is why it makes sense to
try reordering and repositioning windows to minimize their
travel distance. That being said, there are other factors
that impact the quality of the overview layout, such as how
much the windows get scaled and what portion of the overall
available space they take up.
The existing code tries to minimize the travel distance by
sorting the windows in each row by their horizontal position.
There are, however, two problems with this implementation.
First, it compares the coordinates of windows' left edges as
opposed to their centers, which means it yields unexpected
results when a small window is positioned next to the left
edge of a large window. Second, it completely disregards
vertical coordinates, instead assigning windows to the grid
rows using their monotonically increasing window numbers,
effectively vertically sorting them by the order they were
created in.
This commit changes both vertical and horizontal ordering
to work based on the coordinates of the geometric centers
of the windows. That is to say, windows are first assigned
to grid rows based on the vertical coordinates of their
centers, and subsequently sorted inside each row based on
the horizontal coordinates of said centers. In my testing,
this leads to a much more intuitive and visually pleasing
window placement.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/267
GDBusProxy::g-properties-changed is also emitted when the name drops from
the bus, at which point any properties will be null. That's not a valid
gsettings value, so to avoid the corresponding warning, move the g-name-owner
check accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
Those checks were carried over from the very first DND implementation;
if they were ever actually required at all, this is no longer the case
as we moved away from Tweener for all our animations.
The number of cases where an extension is still using Tweener, creates
draggable actors, *AND* requires the checks for proper functioning
should be indistinguishable from zero, so drop the code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/669
By now, Tweener is used exclusively to animate changes to the
StAdjustment:value property. But not for long, as now that we
implement the same transition API as Clutter.Actor, we can
re-use the existing convenience method for property transitions
for adjustment changes as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/669
The tracking was important in an earlier iteration, but as the helper
functions now remove overwritten transitions before setting up the
new ones, we can just as well connect to the ::stopped signal directly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/668
This is rather embarrassing - we currently confuse the transition with
the finished parameter, which means we always run the onComplete handler
no matter whether the transition was interrupted or actually completed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/668
Commit 0f178c3b3d added a shortcirtuit to avoid running
an animation on an invisible actor. However, it introduced
a bug where the current page is not properly updated. That
leads to the wrong set of icons being animated under some
circumstances.
Update the current page even if we bail out early.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/667
Properties that aren't marked as animatable don't support *implicit*
animations, but they can still be animated with explicit transitions.
Use the newly added convenience method to cut down further on Tweener
usage.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
While we are now using implicit animations for all animatable properties,
there are still some cases where we animate other actor properties (for
example from a custom subclass) or associated objects like effects.
Those can still be animated using Clutter animations, as long as we use
the explicit API rather than implicit animations. Again this API is
cumbersome and tricky enough to warrant a convenience wrapper.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
Clutter animations work on GObject properties on animatables. The
last commit took care of the latter by turning all animated objects
into actor subclasses, now it's time to make all properties used
in Tweens into GObject properties.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
We have a couple of places where we don't tween the actor, but a
custom property on the delegate object. In order to move those
to Clutter animations, we will need an animatable, so turn those
objects into widget subclasses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
The set_brightness() method is the most convenient way of controlling
the effect's brightness, but Clutter animations only deal with properties,
so start using the (ClutterColor) brightness property instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
Currently WindowDimmer exposes a JS property that is used to control the
underlying effect. This works fine with Tweener, but not with Clutter
animations which we want to use ultimately.
As a first step towards that, expose a setDimmed() method instead of
the property and handle the animation internally, so it can be adapted
more easily.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/666
We now have everything in place to replace Tweener for all animatable
properties with implicit animations, which has the following benefits:
- they run entirely in C, while Tweener requires context switches
to JS each frame
- they are more reliable, as Tweener only detects when an animation
is overwritten with another Tween, while Clutter considers any
property change
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Setting up implicit animations is more verbose than using tweener, in
particular when setting up a callbacks to run on overwrite or completion.
In order to make its use more convenient, monkey-patch ClutterActor
with an ease() method that works similarly to Tweener.addTween().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Being able to slow down animations is a helpful debugging tool; to not
lose it when starting to use Clutter's implicit animations, monkey-patch
the appropriate methods to support our global slow down factor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
As we currently use Tweener for all animations, we have a single place
for hooking up the enable-animations and slow-down-factor settings.
However that will no longer hold true when we'll start to use Clutter's
built-in animation facilities, so add a small helper function that
applies the necessary adjustments.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Notifications use a transition that overshoots the target value, however
we can only really do that for the position and not the opacity where
some values would end up out of the valid range.
We currently address this by proxying the actual opacity property in a
javascript property, and clamp it to the valid range in an onUpdate()
callback.
This won't be an option if we want to use Clutter animations, so instead,
use separate tweens for opacity and position.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Unlike Tweener, which doesn't know or care about actor state, Clutter
will skip implicit animations on actors that aren't mapped. This makes
sense of course, but it will break the page indicator animation we
do on map: When we get notified about the container being mapped, the
individual indicators (which are the actors being animated) are still
unmapped.
Resolve this by deferring the animation to a LaterFunc.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
For animating the arrows on the screenshield, we currently use a custom
transition function that tweens the opacity from 0 to maxOpacity in the
first half of the animation, and from maxOpacity back to 0 in the second
half.
This doesn't easily translate to Clutter's own animation framework, so
replace the custom transition with two consecutive tweens which do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Dash items are currently animated via the custom "childScale" and
"childOpacity" properties. However since commit efb3025d8c, those
properties actually control the scale-x/scale-y and opacity properties
of the actor itself (not the child), so cut out the intermediate
custom properties in favor of the "real" ones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
When expanding a submenu, we currently use a single tween to animate
both the submenu actor and the source arrow. We do this by tweening
a monkey-patched JS property on the main actor, which we then use
to update the arrow's GObject property on updates. As Clutter cannot
animate random JS properties, this trick will prevent us from using
implicit animations here.
The only reason I can think of for using a single tween is to keep
both animations in perfect lock step, but as expansion and rotation
are visually quite distinct, this shouldn't be required, so just
set up separate animations for each actor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
Now that redisplaying is a lightweight operation that only
adds and removes what changed, we can not be concerned about
redisplaying on folder changes.
Redisplaying will be necessary when custom order in the app
grid is implemented, in order to update not only which icons
are hidden, but also their position.
Call _redisplay() in AllView when folders change.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
FolderView and AllView currently check if the item is
present in the BaseAppView._items map, in order to avoid
adding the same icon multiple times.
Now that BaseAppView._loadApps() has a different role --
it returns a list with all app icons, and BaseAppView
diffs with the current list of app icons -- checking the
BaseAppView._items map is wrong.
Make sure there are no duplicated items in the temporary
array returned by all _loadApps() implementations. Remove
the now unused BaseAppView.hasItem() method.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
BaseAppView currently removes all icons, and readds them, every
time the list of app icons needs to be redisplayed. In order to
allow animating app icon positions in the future, however, we
cannot destroy the actors of the app icons.
Previous commits paved the way for us to do differential loading,
i.e. add only the icons that were added, and remove only what was
removed.
Make the BaseAppView effectively implement differential loading.
The BaseAppView.removeAll() method is removed, since we do not
remove all icons anymore. BaseAppView._loadApps() now returns an
array with the new apps, instead of putting them directly at the
BaseAppView lists.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
Next commit will introduce differential loading of
app icons, and will reorganize this part of the
codebase.
When doing that, the ideal symmetry of the new code
would be:
* Update BaseAppView._allItems array
* Update BaseAppView._items map
* Update BaseAppView._grid actor
Move the code in _loadGrid() into _redisplay() so that
we can check in-place which new icons need to be added.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
Now that the three views follow the exact same loading routine
(remove all + load apps + load grid), we don't need each view
call loadGrid() directly anymore.
This is an important step in order to animate adding and removing
icons, since now we can diff old and new app icons properly.
Move all calls to BaseAppView.loadGrid() to a single one after
BaseAppView._loadApps(). Also add the underscore prefix, since
this is now considered a protected function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
FrequentView is another view that is slightly not unified with how
BaseAppView expects subclasses to load app icons. Instead of using
BaseAppView.addItem() and then calling BaseAppview.loadGrid(), it
adds the app icons directly to the icon grid.
Make FrequentView add icons using BaseAppview.addItem(), and load
the icons using BaseAppView.loadGrid().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
Future patches will diff the old and new icons of views, in order to
animate them when necessary (e.g. adding an app icon to a folder, or
from a folder back to the app grid). In order to do that, all views
must be streamlined in how they load app icons.
Currently, FrequentView and AllView are already following the behavior
expected by BaseAppView, but FolderView isn't. Its icons are loaded by
FolderIcon, and FolderView doesn't implement BaseView._loadApps(),
which makes it impossible to diff old and new apps.
Move the app icon loading routine from FolderIcon to FolderView, by
implementing the _loadApps() method.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/645
The different units - seconds for Tweener and milliseconds for
timeouts - are not a big issue currently, as there is little
overlap. However this will change when we start using Clutter's
own animation framework (which uses milliseconds as well), in
particular where constants are shared between modules.
In order to prepare for the transition, define all animation times
as milliseconds and adjust them when passing them to Tweener.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/663
Our current Weather integration depends on poking around the app's
settings, which we cannot do when the app is sandboxed (as its
filesystem is "hidden away" in a container in that case).
So instead, use our own GSettings schema for the settings, and sync
it with GNOME Weather via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
Since commit 007d30573 we use an actor effect to apply the radial effect and
we pass the effect to the tweener in order to animate it.
However, we always still remove the previously added tween from the actor,
instead that from the actual target.
So, depending the radial effect state, remove the tweens from the proper target
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/653
We currently assume that user icons are square, which is the case when
set by the users settings panel, but not enforced by AccountsService.
Handle that case by moving the pixel size back to the actor and using
an appropriate background-size style property of 'cover' (which means
the smallest dimension of the image is scaled to fit the desired size).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1144
A generic, introspectable Shader effect is not only more flexible
than a shader actor, it will also make it much easier to turn
Lightbox into an actor subclass and replace Tweener with Clutter's
own animation support.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/651
Due to typecasting being done when converting floats to integers in
gnome-settings-daemon, a volume of 0.9% in g-s-d will end up as 0% in
gnome-shell. This can lead to a mismatch of icons between the volume OSD
(the icon to use is determined by g-s-d itself) and the shells own
volume indicator (the icon to use is determined by the shell using the
volume received from g-s-d).
To fix this, simply get rid of the conversion from float to percentage
in g-s-d and back to floats in the shell and just send a float/double
value on DBus.
https://gitlab.gnome.org/GNOME/gnome-settings-daemon/merge_requests/78https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
LevelBar is not really used, all the checks are implemented inside
BarLevel as well and the accessible name is wrong because the osdWindow
doesn't only show the volume, but also the brightness and other things.
The workaround for updating the bars width is also no longer needed now
that we have BarLevel.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
There are some cases (for example when tweening value changes), where
the level will be set to the same value it already is at. Avoid those
unnecessary repaints by checking whether the value is already used and
returning if it is.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/385
AppIcon makes itself draggable, and handles the various DnD
routines such as 'drag-begin' and 'drag-end' by making the
Overview emit the appropriate signals.
However, when destroyed, the AppIcon does not try to finish
any drag operations that started. That causes the event
blocker in AllView not to be updated correctly when dragging
icons to outside folders.
Make AppIcon emit 'item-drag-end' when a drag operation
started and it's destroyed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/643
The functions here are asynchronous to handle control back to the
mainloop while waiting for an action to complete, not to run operations
in parallel. That is, the race condition the rule is protecting against
isn't an issue here, so disable the error.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
This was left-over in commit 2743f18af, and probably is the real reason
why the busy spinner wasn't using the shared AnimatedIcon.Spinner class:
The animation there was much slower.
Still, let's keep the code as-is for now, if we really need a different
animation time, we can add an optional constructor parameter to the
Spinner class.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/640
At the moment the only way to open a folder icon is to click on it;
there's no API to open the icon programmatically.
This commits adds an open method and makes the click handler use
it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
When a FolderIcon is opened, it asks the parent view to allocate
space for it, which takes time. Eventually, the space-ready
signal is emitted on the view and the icon can make use of the new
space with its popup. If the icon gets destroyed in the
interim, though, space-ready signal handler still fires.
This commit disconnects the signal handler so it doesn't get called
on a destroyed icon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
It is important that the FolderView of a FolderIcon always
gets destroyed before the AppFolderPopup, since the view
may or may not be in the popup, and the view should
get cleaned up exactly once in either case.
This commit adds a destroy handler on FolderIcon to ensure
things get taken down in the right order, and to make sure
the view isn't leaked if it's not yet part of the popup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
At the moment AppFolderPopup calls popdown on destruction,
which leads to open-state-changed getting emitted after
the actor associated with the popup is destroyed.
This commit handles ungrabbing and closing from an
actor destroy handler to side-step the open-state-changed
signal.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
If an icon already exists in an app view with the same id, the
duplicate is not added on a call to addItem. Unfortunately,
since it's not added, the icon actor gets orphaned and leaked.
This commit address the problem by introducing a new hasItem
method and disallowing callers to call addItem with a duplicate
in the first place.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/628
meta_later_add() is modelled after g_idle_add() and friends, and
the handler's boolean return value determines whether it should
be scheduled again or removed. There are some places where we omit
the return value, add them (although the implicit return value of
"undefined" already gives us the intended result).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/637
The startup/busy indication in the app menu was left out of commit
22e21ad7d1 because it doesn't use a hard-coded image, but as the
image in the CSS is actually the same used by the spinner class,
drop the "custom" styling and use the regular spinner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/636
Trying to disable an extension that is enabled by the session mode
currently has no effect, which is clearly confusing. We could update
the various extension UIs to reflect that via sensitivity, but being
unable to configure extensions based on which session the user picked
at login isn't obvious either.
So instead, add a 'disabled-extensions' gsettings key to list extensions
that should not be enabled which takes precedence over 'enabled-extensions'
and can be used to disable session mode extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Now that extension loading and the extensions map are no longer shared
between the gnome-shell and gnome-shell-extension-prefs processes, we
can move both into the ExtensionManager which makes much more sense
conceptually.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
By direclty using the underlying GSetting, whether or not an extension
appears as enabled or disabled currently depends only on whether it is
included in the 'enabled-extensions' list or not.
However this doesn't necessarily reflect the real extension state, as an
extension may be in error state, or enabled via the session mode.
Switch to the extensions D-Bus API to ensure that the list of extensions
and each extension's state correctly reflects the state in gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Extensions are used to calling the getCurrentExtension() utility function,
both from the extension itself and from its preferences. For the latter,
that relies on the extensions map in ExtensionUtils being populated from
the separated extension-prefs process just like from gnome-shell.
This won't be the case anymore when we switch to the extensions D-Bus API,
but as we know which extension we are showing the prefs dialog for, we
can patch in a simple replacement that gives extensions the expected API.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Each row represents an extension, so it makes sense to associate the
rows with the actual extensions instead of linking rows and extensions
by looking up the UUID in the external extensions map in ExtensionUtils.
This will also make it much easier to stop using the shared extension
loading / map in favor of the extension D-Bus API.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Whether or not an extension can be enabled/disabled depends on various
factors: Whether the extension is in error state, whether user extensions
are disabled and whether the underlying GSettings keys are writable.
This is complex enough to share the logic, so add it to the extension
properties that are exposed over D-Bus.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The existing 'ExtensionStatusChanged' signal has a fixed set of parameters,
which means we cannot add additional state without an API break. Deprecate
it in favor of a new 'ExtensionStateChanged' signal which addresses this
issue by taking the full serialized extension as parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Serializing an extension for sending over D-Bus is currently done by the
appropriate D-Bus method implementations. Split out the code as utility
function and add a corresponding deserialization function, which we will
soon use when consuming the D-Bus extension API from the extension-prefs
tool.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Extensions are currently enabled or disabled by directly changing the
list in the 'enabled-extensions' GSettings key. As we will soon add
an overriding 'disabled-extensions' key as well, it makes sense to
offer explicit API for enabling/disabling to avoid duplicating the
logic.
For the corresponding D-Bus API, the methods were even mentioned in
the GSettings schema, albeit unimplemented until now.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
While public methods to enable/disable extensions make sense for an
extension manager, the existing ones are only used internally. Make
them private and rename them, so that we can re-use the current
names for more useful public methods.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The extension system started out as a set of simple functions, but
gained more state later, and even some hacks to emit signals without
having an object to emit them on.
There is no good reason for that weirdness, so rather than imitating an
object, wrap the existing system into a real ExtensionManager object.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
It makes sense to keep extension-related enums in the same module instead
of spreading them between ExtensionSystem and ExtensionUtils.
More importantly, this will make the type available to the extensions-prefs
tool (which runs in a different process and therefore only has access to
a limited set of modules).
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Commit bd18313d12 changed to a new naming scheme for battery icons,
and used to old icon names as fallback-icon-name for compatibility
with older/other icon themes.
However that fallback code isn't working correctly, as GThemedIcon's
default fallbacks will transform a name of `battery-level-90-symbolic`
to a list of names:
- `battery-level-90-symbolic`
- `battery-level-symbolic`
- `battery-symbolic`
The last one frequently exists, so instead of the intended fallback,
we end up with a generic battery icon.
Address this by specifying the icon as GIcon instead of an icon-name,
where we have more control over how the icon is resolved.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1442
Just as we did for the workspace switcher popup, support workspaces
being laid out in a single row in the window picker.
Note that this takes care of the various workspace switch actions in
the overview (scrolling, panning, touch(pad) gestures) as well as the
switch animation, but not of the overview's workspace switcher component.
There are currently no plans to support other layouts there, as the
component is inherently vertical (in fact, it was the whole reason for
switching the layout in the first place).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
While mutter supports a variety of different grid layouts (n columns/rows,
growing vertically or horizontally from any of the four corners), we
hardcode a fixed vertical layout of a single column.
Now that mutter exposes the actual layout to us, add support for a more
traditional horizontal layout as well.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/575
Extension preferences Application class is just a container for a GtkApplication
so instead of using composition we can inherit from the base GObject class.
Also replace signal connections with vfunc's.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/631
In some cases the style-changed signal hasn't been emitted when
_computeLayout() is called, resulting in the use of the default spacing
and item size values for the calculations.
One case where this happens is when starting a search. Right after the
initialization of GridSearchResults, _computeLayout() is called from
_getMaxDisplayedResults() and the style-changed signal hasn't been
emitted yet. The computed layout will be wrong and the maximum
number of results will also be wrong.
To prevent this from happening, make sure the style has been updated
before doing the calculations in _computeLayout().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The calculation of how many results can be shown in GridSearchResults is
broken: The width of the parent container (resultsView.actor) we're
using as the maximum width right now is the width of the scrollView of
SearchResults (which always expands to the whole screen size). This
width will only be correct if the scrollView (ie. the whole screen) is
smaller than the max width of searchResultsContent, which only is the
case for screens smaller than 1000px.
To fix the calculation, use the width of our own actor and don't get it
using clutter_actor_get_width(), but using the last allocation of the
actor. This way we don't get the preferred width if the actor is not
allocated at this point (it's hidden by _ensureProviderDisplay() when
starting a new search).
Then, when the allocation of the actor changes, rebuild the grid search
results by calling updateSearch() with the old arguments to ensure the
number of visible results is correct. The fact that we're only listening
for allocation changes here is the reason why we never want to use the
preferred width of the actor inside _getMaxDisplayedResults(): While
the actor is hidden clutter_actor_get_width() would return the preferred
width, which we'd then use the as the maximum width. But if the actor
had a correct allocation before, no notify::allocation signal will be
emitted when the actor is shown again because the allocation is still
the same, and we'll end up using the preferred width as maximium width
forever.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
The functionality the searchResultsBin container provides can easily be
moved into a subclass of St.BoxLayout, no need for an additional StBin.
The "searchResultsBin" css class isn't used in the stylesheets either.
Same with the scrollChild container.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/110
Object.prototype.hasOwnProperty() is more precise than checking for
falsiness, for instance the following is true:
{ foo: undefined }.hasOwnProperty('foo');
However when checking for a handler ID, a more relaxed check is more
appropriate, as particularly 0 is not a valid handler ID.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/626
For some reason, people are still seeing those after commit d5ebd8c8.
While this is something we really should figure out, we can work around
the issue by keeping the view actors hidden until the update is complete.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1065
Window previews are sometimes shown translucent, for example during
drags or animations. They can also have attached dialogs, in which
case the opacity should affect the combination of all windows instead
of being applied to each window individually, blended together, so
make sure they are redirected as a whole when necessary.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/774
Whether people love or hate the hot corner depends in large extents
on hardware sensitivity and habits, which is hard to get right
universally. So bite the bullet and support an option to enable or
disable hot corners ...
https://bugzilla.gnome.org/show_bug.cgi?id=688320
GNOME Shell is spitting out some errors in the journal due to its attempts
to speak to PackageKit, which is not present on Endless OS, so let's add
some runtime checks to make sure that PackageKit is actually available
before assuming so and using its proxy to decide which kind of UI to
show to the user when ending the session.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/369
The first parameter to Object.assign() is the same target object that
will be returned. That is, since commit 46874eed0 Params.parse() modifies
the @defaults object. Usually we pass that parameter as an object literal
and this isn't an issue, but the change breaks spectacularly in the few
cases where we use a re-usable variable.
Restore the previous behavior by copying the object first.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/615
Standard javascript now has Object.assign() which is very similar to
Params.parse(), except that the latter by default disallows "extra"
parameters. We can still leverage the standard API by simply
implementing the error check, and then call out to Object.assign()
for the actual parameter merging.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/612
Braces are optional for single-line arrow functions, but there's a
subtle difference:
Without braces, the expression is implicitly used as return value; with
braces, the function returns nothing unless there's an explicit return.
We currently reflect that in our style by only omitting braces when the
function is expected to have a return value, but that's not very obvious,
not an important differentiation to make, and not easy to express in an
automatic rule.
So just omit braces consistently as mandated by gjs' coding style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
While we have some style inconsistencies - mostly regarding split lines,
i.e. aligning to the first arguments vs. a four-space indent - there are
a couple of places where the spacing is simply wrong. Fix those.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent on whether case labels share the same
indentation level as the corresponding switch statement or not. gjs
goes with the default of no additional indentation, so go along with
that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
Starting an object literal with a comment throws off eslint's rules
for brace style (newline between brace and properties for both opening
and closing brace or neither) as well as indentation (fixed four-space
indent or align with the previous argument).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
Using multiple spaces after property names in order to align the
values isn't something we do elsewhere.
Instead, align the values by using a fixed 4-space indent as preferred
by gjs nowadays.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
The current code is carefully avoiding an overly wide line length as
well as adding literal new lines to the string due to indentation. It's
clever and barely legible.
Instead, use one string per line similar to how they appear in the actual
output, and join them together when setting the clipboard text.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
When destructuring multiple return values, we often use trailing commas
to indicate that there are additional elements that we are ignoring.
There isn't anything inherently wrong with that, but it's a style that's
too confusing for eslint - on the one hand we require a space after a
comma, on the other hand we require no space before closing brackets.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
We are currently inconsistent with whether or not to put a space
after catch clauses. While the predominant style is to omit it,
that's inconsistent with the style we use for any other statement.
There's not really a good reason to stick with it, so switch to
the style gjs/eslint default to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
While allowed by the syntax, they are problematic because the
variable is in the scope of the switch() statement, but only
valid if a particular case clause is reached.
Add braces to limit the variables' scope to the corresponding
case clause to avoid that problem.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
Converting a variable to a particular type can be done explicitly (with
functions like Number() or toString()) or implicitly by relying on type
coercion (like concatenating a variable to the empty string to force
a string, or multiplying it with 1 to force a number).
As those tend to be less readable and clear, they are best avoided. So
replace the cases of string coercion we use with template strings, and
clarify the places that can be confused with number coercion.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
We can use that newer method where we don't care about the actual position
of an element inside the array.
(Array.includes() and Array.indexOf() do behave differently in edge cases,
for example in the handling of NaN, but those don't matter to us)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/152
Control flow statements like return, break or continue are considered
unsafe in finally blocks, as they take precendence over any control
flow statement in the try and catch blocks, which may be unexpected.
This isn't the case here as the statement in the finally block is the
only one, but we can just as well avoid the finally block altogether
and use a regular return statement.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/606
This vfunc override has been introduced to ensure app icons are always
squared, but since the container of the AppIcon gets a square allocation
anyway if the 'square' property of the SwitcherButton is set, there's
no need to return a special width here.
Without the override we can also stop setting the size of the iconBin
manually. And since shell_app_create_icon_texture() uses logical pixels
but clutter_actor_set_size() uses screen pixels, that means we now no
longer set the size of the icon back to the unscaled value after it was
already correct.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1325
We're calculating icon sizes for the alt tab switcher early and at a
point where the style attributes of this._list are not loaded yet. To
make sure the value of this._list.spacing is correct, call
ensure_style() on this._list before accessing the spacing.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/587
The polkit password dialog has a spinner that gets displayed
while the users password is being verified.
Unfortunately, the spinner stop method unintentionally calls
back into itself after the stop fade out animation is complete.
The stop method is called at startup, so the looping begins as
soon as the dialog is visible and continues until the dialog is
dismissed.
This commit fixes the loop by having the stop method cease
calling itself, and instead having it call the stop method on the
superclass.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/602
The polkit password dialog has a spinner that gets displayed
while the users password is being verified.
Unfortunately, the spinner stop method unintentionally calls
back into itself after the stop fade out animation is complete.
The stop method is called at startup, so the looping begins as
soon as the dialog is visible and continues until the dialog is
dismissed.
This commit fixes the loop by having the stop method cease
calling itself, and instead having it call the stop method on the
superclass.
While the confirmation dialog for extension installation is simpler
than - say - authentication dialogs, it still makes sense to re-use
the common content layout instead of duplicating it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/600
Using one variable to initialize all gestures will update the address of
the "gesture" pointer with every newly initialized object. This means
that event handlers which also use the "gesture" pointer like the
'keyboard-visible-changed' handler will update a different gesture as
soon as the pointer is changed.
This lead to a bug where the handler of 'keyboard-visible-changed'
wrongly nabled the unfullscreen gesture. Fix that by assigning each
gesture its own variable.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/598
In practice this has been seen to fail:
JS ERROR: TypeError: active.get_devices(...)[0] is undefined
ensureActiveConnectionProps@resource:///org/gnome/shell/ui/status/network.js:73:22
_getMainConnection@resource:///org/gnome/shell/ui/status/network.js:1791:13
_syncMainConnection@resource:///org/gnome/shell/ui/status/network.js:1809:32
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1406
Since commit 520cea9394, the opacity of icon grid children is used
both to skip children outside the current viewport and to hide the
real icons while animating icon clones.
As a result, a grid animation during an animation now ends up showing the
icons that are being animated. Avoid that glitch by leaving children's
opacity alone when there's an ongoing animation.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/582
AllView's adaptToSize is called as part of viewStack allocation vfunc, and this
makes the adjustment value to be reset while relayouting.
So, fix this by delaying this using the Meta later that we already had for
pageIndicators operations.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1392
Since the repositioning is now done during allocation, we can just queue
a relayout when setting the boxpointer positioning via the source actor.
As per this _relayout() and _updateFlip now needs to be called during allocation
only and with an allocation box set.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/576
Changing the arrow side might need to reposition the boxpointer, however
if this happens during allocation, we don't need to trigger a new relayout since
we'd set the new allocation once _updateFlip's _reposition call is terminated,
otherwise if the position has changed, changing the boxpointer coordinates
will trigger a relayout anyways.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/576
As per commit 044572cb60 boxpointer uses its own coordinates to position itself.
However this would lead to warning when mutter-clutter is compiled with debug
options as we'd might try to set the box coordinates during the allocation
cycle.
So, when calling _reposition during allocation, instead of setting the actor's
coordinates we just pass the allocation box and we adjust its origin, in order
to set it properly in the vfunc.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1382https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/576
Hiding a child implies a parent reallocation, and IconGrid does it for the
children that doesn't fit in the available space, but this could lead to an
allocation recursion cycle. This has been introduced by commit 0e0574a0 to
reduce CPU usage not to using JS vfuncs.
To avoid this, toggle the children opacity instead so that we can achieve the
same visibility result, without any reallocation need.
In this way we also fix the case where hidden children can be shown again,
as _getVisibleChildren doesn't filter-out transparent ones, restoring the
pre-commit 0e0574a0 behavior.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1336https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/559
Background is monitoring the whole `org.gnome.desktop.background` gsettings keys
for changes connecting to the non-specialized 'changed' signal and re-emitting
this as-is.
This means that when the background is changed via control-center, we get
multiple 'changed' signal events from GSettings, and for each one of this we
recreate a Background and a BackgroundActor.
Avoid this by using an idle to delay the emission of the 'changed' signal
grouping the events.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/558
The same Meta.Background could be used by multiple instances of background
actors, and so should not be disposed when the actor using it is destroyed.
Instead of calling `run_dispose` directly on it, just nullify the reference
on destroy method, leaving the job of doing the proper disposition to the
gabage collector that keeps the proper reference count on the Meta.Background.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/501https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/558
Adds the UI part for the pointer accessibility features.
The various timeouts running are notified using a pie-timer showing
under the pointer.
For dwell-click type selection, we use a drop-down menu. Users can
use the dwell-click to select the next type of dwell click to be
emitted.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/474
Starting from commit 7bb84dae, GrabHelper requires the owner to be an Actor as
we pass this to pushModal that assumes it to be as well.
So check that GrabHelper owner is an actor and throws an error if it is not the
case. This helps in tracking down issues such as gnome-shell-extensions!68
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/565
The `switch-to-application-n` shortcuts are essentially "launch the nth
app in the dash" actions, so they are at the very least confusing when
the dash isn't available because the overview itself is disabled (for
example in initial-setup mode).
So disable the shortcuts when the overview is disabled, but delegate the
decision to a separate function so that extensions like 'panel-favorites'
which expose favorites by some other means can easily re-enable them.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1333
A menu item activation might lead to a call to `itemActivated` which eventually
will close the menu which leads to a `PopupMenu.removeAll` that destroys all the
items, stopping the emission of the 'activate' signal for them.
Before commit 4258ae3e this was not happening because destroy'ing a javascript
object wasn't really disposing it and thus stopping the signal emissions.
So, ensure that `itemActivated` is called after that all the other callbacks
have been consumed, and so that the menu is closed as last thing.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1326https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/557
Upon construction of the CDMA modem proxy, _reloadCdmaOperatorName()
is called and the value of the Sid property is read.
That property is defined as UINT32 in the D-Bus interface, but the
value may not be loaded yet after the proxy is constructed, in which
case its value will be null.
In _findProviderForSid(), we'll end up calling lookup_cdma_sid(null)
which fails with the following assertion:
gnome-shell[1082]: nma_mobile_providers_database_lookup_cdma_sid: assertion 'sid > 0' failed
This commit changes the (sid == 0) check in _findProviderForSid()
to (!sid) which will also catch the null case.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
The 'destroy' signal is emitted at the end of the destroy() method.
However the implementation of destroy() can end up emitting one of the
signals we connect to on the window, causing us to re-enter destroy
from its callback.
That will in turn lead to some objects getting disposed twice, which
produces a stack trace like the following one.
This commit fixes the issue by overriding the destroy() method instead
of connecting to the signal, which allows us to disconnect the signal
handlers from the window at an earlier time and avoid re-entrancy.
--
gnome-shell[1082]: Object Gio.Settings (0x7f0af8143f00), has been already deallocated — impossible to access it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs.
org.gnome.Shell.desktop[1082]: == Stack trace for context 0x5627f7d1e220 ==
org.gnome.Shell.desktop[1082]: #0 5627f9e801a8 i resource:///org/gnome/shell/ui/messageTray.js:238 (7f0aefa9eca0 @ 22)
org.gnome.Shell.desktop[1082]: #1 5627f9e80108 i resource:///org/gnome/shell/ui/messageTray.js:802 (7f0aefaa2ee0 @ 28)
org.gnome.Shell.desktop[1082]: #2 5627f9e80070 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:79 (7f0aef7b29d0 @ 62)
org.gnome.Shell.desktop[1082]: #3 7fffa69fbfc0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #4 5627f9e7ffe0 i resource:///org/gnome/shell/ui/messageTray.js:121 (7f0aefa9e1f0 @ 71)
org.gnome.Shell.desktop[1082]: #5 5627f9e7ff38 i resource:///org/gnome/shell/ui/messageTray.js:1408 (7f0aefaa58b0 @ 22)
org.gnome.Shell.desktop[1082]: #6 5627f9e7fe80 i resource:///org/gnome/shell/ui/messageTray.js:1237 (7f0aefaa51f0 @ 729)
org.gnome.Shell.desktop[1082]: #7 5627f9e7fde8 i resource:///org/gnome/shell/ui/messageTray.js:1055 (7f0aefaa3d30 @ 124)
org.gnome.Shell.desktop[1082]: #8 7fffa69ff8e0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #9 7fffa69ff9d0 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #10 5627f9e7fd58 i resource:///org/gnome/shell/ui/messageTray.js:479 (7f0aefaa0940 @ 50)
org.gnome.Shell.desktop[1082]: #11 5627f9e7fcb8 i resource:///org/gnome/shell/ui/messageTray.js:808 (7f0aefaa2ee0 @ 99)
org.gnome.Shell.desktop[1082]: #12 5627f9e7fc28 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:69 (7f0aef7b28b0 @ 13)
org.gnome.Shell.desktop[1082]: #13 5627f9e7fb80 i resource:///org/gnome/shell/ui/main.js:566 (7f0aefcd8820 @ 216)
org.gnome.Shell.desktop[1082]: #14 5627f9e7fad0 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:103 (7f0aef7b2c10 @ 27)
org.gnome.Shell.desktop[1082]: #15 5627f9e7fa58 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:43 (7f0aef7b2700 @ 17)
org.gnome.Shell.desktop[1082]: #16 7fffa6a03350 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #17 5627f9e7f9d0 i resource:///org/gnome/shell/ui/messageTray.js:471 (7f0aefaa08b0 @ 22)
org.gnome.Shell.desktop[1082]: #18 5627f9e7f950 i resource:///org/gnome/shell/ui/calendar.js:752 (7f0aefaabdc0 @ 22)
org.gnome.Shell.desktop[1082]: #19 7fffa6a048f0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: == Stack trace for context 0x5627f7d1e220 ==
org.gnome.Shell.desktop[1082]: #0 5627f9e801a8 i resource:///org/gnome/shell/ui/messageTray.js:239 (7f0aefa9eca0 @ 42)
org.gnome.Shell.desktop[1082]: #1 5627f9e80108 i resource:///org/gnome/shell/ui/messageTray.js:802 (7f0aefaa2ee0 @ 28)
org.gnome.Shell.desktop[1082]: #2 5627f9e80070 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:79 (7f0aef7b29d0 @ 62)
org.gnome.Shell.desktop[1082]: #3 7fffa69fbfc0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #4 5627f9e7ffe0 i resource:///org/gnome/shell/ui/messageTray.js:121 (7f0aefa9e1f0 @ 71)
org.gnome.Shell.desktop[1082]: #5 5627f9e7ff38 i resource:///org/gnome/shell/ui/messageTray.js:1408 (7f0aefaa58b0 @ 22)
org.gnome.Shell.desktop[1082]: #6 5627f9e7fe80 i resource:///org/gnome/shell/ui/messageTray.js:1237 (7f0aefaa51f0 @ 729)
org.gnome.Shell.desktop[1082]: #7 5627f9e7fde8 i resource:///org/gnome/shell/ui/messageTray.js:1055 (7f0aefaa3d30 @ 124)
org.gnome.Shell.desktop[1082]: #8 7fffa69ff8e0 b self-hosted:979 (7f0aefa515e0 @ 440)
org.gnome.Shell.desktop[1082]: #9 7fffa69ff9d0 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #10 5627f9e7fd58 i resource:///org/gnome/shell/ui/messageTray.js:479 (7f0aefaa0940 @ 50)
org.gnome.Shell.desktop[1082]: #11 5627f9e7fcb8 i resource:///org/gnome/shell/ui/messageTray.js:808 (7f0aefaa2ee0 @ 99)
org.gnome.Shell.desktop[1082]: #12 5627f9e7fc28 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:69 (7f0aef7b28b0 @ 13)
org.gnome.Shell.desktop[1082]: #13 5627f9e7fb80 i resource:///org/gnome/shell/ui/main.js:566 (7f0aefcd8820 @ 216)
org.gnome.Shell.desktop[1082]: #14 5627f9e7fad0 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:103 (7f0aef7b2c10 @ 27)
org.gnome.Shell.desktop[1082]: #15 5627f9e7fa58 i resource:///org/gnome/shell/ui/windowAttentionHandler.js:43 (7f0aef7b2700 @ 17)
org.gnome.Shell.desktop[1082]: #16 7fffa6a03350 b resource:///org/gnome/gjs/modules/signals.js:142 (7f0aefccb670 @ 386)
org.gnome.Shell.desktop[1082]: #17 5627f9e7f9d0 i resource:///org/gnome/shell/ui/messageTray.js:471 (7f0aefaa08b0 @ 22)
org.gnome.Shell.desktop[1082]: #18 5627f9e7f950 i resource:///org/gnome/shell/ui/calendar.js:752 (7f0aefaabdc0 @ 22)
org.gnome.Shell.desktop[1082]: #19 7fffa6a048f0 b self-hosted:979 (7f0aefa515e0 @ 440)
gnome-shell[1082]: g_object_run_dispose: assertion 'G_IS_OBJECT (object)' failed
gnome-shell[1082]: Object Gio.Settings (0x7f0af8161750), has been already deallocated — impossible to access it. This might be caused by the object having been destroyed from C code using something such as destroy(), dispose(), or remove() vfuncs.
gnome-shell[1082]: g_object_run_dispose: assertion 'G_IS_OBJECT (object)' failed
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
Make the dialog a widget itself, removing the `_group` property used for
handling the actor.
Update all the inherited classes to be also GObject implementations, moving all
the signals to proper object ones.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/55
Since version 1.50.0, gjs defines GObject.NotImplementedError for throwing
errors when a "virtual" method that requires a subclass implementation is not
defined.
So use this instead of a generic JS Error in such cases.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/549
This extends the ShellMountPasswordDialog by widgets which allow
specifying parameters supported by TrueCrypt and VeraCrypt compatible
volumes (TCRYPT). This includes:
- Whether the volume to be unlocked is hidden.
- Whether the volume to be unlocked is a system partition.
Note: TrueCrypt and VeraCrypt only support encrypting Windows
systems [1], so the label for this option is "Windows System Volume".
- Whether to use a PIM [2].
- Whether to use keyfiles. Unfortunately, GMountOperation doesn't
support TCRYPT keyfiles, so if this checkbox is checked, we tell the
user that they should unlock the volume with Disks, which supports
unlocking TCRYPT volumes with keyfiles.
[1] https://www.veracrypt.fr/en/System%20Encryption.html
[2] https://www.veracrypt.fr/en/Header%20Key%20Derivation.htmlhttps://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/126
App IDs in gnome-shell don't match AppStream, Flatpak or Snap IDs. For the
desktop portal, the latter two are more relevant, so include it in the
returned information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1289
The top_window_group is used for windows like popup menus, which should
appear above shell chrome like the panel.
Since we want important actors such as the screen keyboard or modal
dialogs to be shown above those windows, add their actors after adding
global.top_window_group to this.uiGroup and provide a new function
addTopChrome() to add important chrome above the top_window_group.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/917https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/358
Don't use composition for PopupBaseMenuItem, but instead inherit from BoxLayout.
So remove the internal actor, making all the menu items actor themselves.
Add an actor property as fallback to avoid warnings for usage in menus.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/499
Our search for system actions is currently inconsistent with searching
for applications: While we match terms anywhere within keywords, GIO
will only match at the beginning of words.
In order to get the same behavior, split keywords into single words
and only match terms at the beginning of a word.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/745
gjs now supports an optional GTypeFlags value for GObject subclasses
defined with GObject.registerClass(), so it is not possible to define
abstract classes on the gobject-level, just like from C.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/517
When toggling keyboard various times, we might get an error because trying to
disconnect an idle that isn't set anymore.
This is because when we remove the idle, we don't unset the ID.
Also clear the idle when destroying the keyboard.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/540
The current page is going to be destroyed as part of _onKeyboardGroupsChanged
cleanup, however we don't unset its pointer, and thus we'd might try to call a
function using an invalidated pointer.
So, unset the this._current_page reference when its get destroyed, connecting
to destroy signal when setting it and disconnecting when changing page.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1281https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/540
The interface name when a device is added may not be the final one. For
example when using USB tethering, it will first appear as 'usb0' before
being renamed to something like 'enp0s20f0u1' depending on the port the
phone is plugged in.
As a result, we will ignore the new interface name in that case and fail
to associate the correct connection with the device: Instead of the
correct "USB Ethernet" (or user-customized name), it will show up as
"Ethernet".
Fix this by updating names and connections when a device's interface
property changes.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/534
This makes it possible to drag a window which appears connected with the
panel, even if it is not in focus. As a result, it should be easier to
manipulate side-by-side windows.
https://bugzilla.gnome.org/show_bug.cgi?id=679290
To prevent a small gap between windows in the workspace switching
animation, we temporarily shift windows up or down by the height of the
panel. This obviously breaks the animation for fullscreen windows, those
will overlap with the ones on the other workspace since there is no
panel shown in that case.
Fix this by checking whether the old or new workspace includes a
fullscreen window and don't shift the windows if there is one.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/757https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/322
Dialog's subtitle or body could not be properly wrapped, while it's ellipsized
when the text's width doesn't exceed the container size.
Clutter text has an `ellipsize` property, however in dialog's subtitle and body
we have been setting the `ellipsize-mode` property to Pango.EllipsizeMode.NONE
that is not present in the underlying GObject.
Not being an error in javascript, gjs didn't warn us about this, while at the
same time the St.Label's default Pango.EllipsizeMode.END was used.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/922https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/531
If an actor's allocation is outdated, clutter_actor_get_allocation_box()
will queue a relayout. That's why it's advised to not use the function
unless the allocation is known to be valid (namely during paint), but
in particular not from within get_preferred_width/height vfuncs.
Using the :allocation property (which may be outdated) would be better,
but in this case we can simply delegate the request to the correct actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1065
We were cleaning up self._groups, but the actors for all previous
groups/layers/modes would remain attached to the aspect container,
simply hidden.
Under some circumstances this can really make the amount of actors
in the shell stage to quickly ramp up, it's not just a "leak" but
also has potential side effects on performance.
We should destroy all child actors of this._aspectContainer, except
the static ones (emoji and keypad).
While at it, fix this._groups re-initialization, as it's actually an
object, not an array.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/523
Closes?: https://gitlab.gnome.org/GNOME/mutter/issues/556
We currently assume that every location has an associated timezone.
While this is sound in the real world, in practise it depends on
whether or not libgweather can find a corresponding timezone DB
entry.
This used to be a fringe case, but has become more likely when commit
https://gitlab.gnome.org/GNOME/libgweather/commit/d7682676ac9 moved
weather stations from cities to countries - the station itself is un-
likely to have a timezone entry, and the country may be part of more
than a single timezone.
It would be good for libgweather to return a timezone for those
locations again, but we should defend against the case anyway.
We cannot tell what time it is at a particular location without
knowing the timezone, so simply filter them out.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1062
The top bar handles allocating all its children itself, so there's
little value in chaining up to st_widget_allocate() and get the
default layout manager allocating all children again (and possibly
differently).
If this happens, we end up with an infinite allocation cycle with
corresponding performance penalty. Fix this by just doing and what
Shell.GenericContainer did before commit 286ffbe2b6 replaced it,
and not chain up to StWidget.
Thanks to Robert Mader for debugging the issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1054
On one hand, we were using a path instead of an URI on
rsvg_handle_set_base_uri(). This broke at some point in librsvg
(presumably for the best, handling paths there sounds non-standard)
leaving a blank svg (As the base image wouldn't be accessed).
On the other hand, we use this with the deprecated rsvg_handle_write()
which we should drift away from.
Using rsvg_handle_new_from_stream_sync() neatly solves both. We use
newer API based on input streams and GFiles, and it internally does
the right thing, bringing the pad OSD back to life.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1220
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Unlike regular keys that generate key events from a virtual device,
emoji keys rely on the input method to insert the character. However
as the compositor cannot inject IM events into ibus, this only works
in the shell's own entries on X11.
We shouldn't expose mostly broken functionality to the user, so limit
the feature to the wayland session.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1172
Move the signal handlers for changed settings to be connected after the
creation of the menu items to make sure a reference to the item is set.
While it also worked fine before, this solution certainly looks cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/512
At the point it is disabled, it has got signal handlers connected but
this._workspacesView is uninitialized. This triggers:
(gnome-shell:3993): Gjs-WARNING **: 18:49:53.281: JS ERROR: Exception in callback for signal: cancel: TypeError: this._workspacesViews is undefined
_endTouchGesture@resource:///org/gnome/shell/ui/workspacesView.js:527:25
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
set enabled@resource:///org/gnome/shell/ui/windowManager.js:478:13
WorkspacesDisplay<@resource:///org/gnome/shell/ui/workspacesView.js:482:9
ViewSelector<@resource:///org/gnome/shell/ui/viewSelector.js:167:35
ControlsManager<@resource:///org/gnome/shell/ui/overviewControls.js:405:29
init@resource:///org/gnome/shell/ui/overview.js:234:26
_initializeUI@resource:///org/gnome/shell/ui/main.js:184:5
start@resource:///org/gnome/shell/ui/main.js:124:5
@<main>:1:31
On startup. Shuffling these two lines prevent this from happening.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/506
The port away from the old Shell.GenericContainer actor turned many JS
classes with a corresponding actor property into Clutter.Actor subclasses.
For compatibility reasons, those properties were kept around for a while.
They were now removed and any code that still uses them should be adjusted.
Facilitate that transition by defining the compatibility property on
Clutter.Actor itself, but log a warning every time it is accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/487
It may not be immediately obvious that the windows section is a
list of open application windows, as titles like "Downloads" can
easily be confused with an action. Add a section heading to avoid
confusion.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/968
We currently copy the app icon menu behavior, which puts a separator
between windows from the current workspace and windows from any other
workspace. It is more useful to have the windows section appear as a
clearly marked group, so drop the separator.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/968
Work around a known regression from [1] that caused the volume bar in
the OSD window to never be hidden, even if the volume is set to 0. This
happened because the border radius of the barLevel is always drawn
without ensuring that the actual bar is visible.
So simply check if the value to draw is 0, and if it is, don't draw the
border radius of the bar at all. This will still result in incorrect
representation of values that have a width smaller than 2*border-radius,
but at least the bar looks right for a width of 0 now.
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/2https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/384
If a window gets destroyed right before it's resize
animation starts the user can get confronted with an undead
zombie clone that doesn't go away.
This commit makes sure said clones get reaped with their
actors.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1166
When determining the biggest icon size that fits the available height,
we first subtract the additional space requirements of icons (spacing,
padding, running indicator etc.) and then divide the result by the
number of icons to get the maximum size available to each icon texture.
In the above, the additional space requirement of each icon is taken
from the first icon (as all icons are assumed to be the same), and
calculated as the difference between the icon button's preferred height
and the currently used icon size.
To make sure that the icon is actually using the dash's current icon
size (even while animating to a new icon size), we enforce its height
during the size request and restore its original height afterwards.
However after some recent changes, that step is causing troubles:
For some reason, the original height may be 0, and when we restore it,
we end up forcing a fixed non-height that bypasses the regular size
request machinery.
While it is unclear where exactly the zero height comes from (maybe
waiting for a valid resource scale?), it is clear that it's best
to avoid forcing a fixed height. So instead of making the icon
texture comply with the assumed icon size, adjust the calculations
to use its current height request.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1053
We recently added offsets to world clocks that represent the location's
timezone as UTC offset. However for most users, that representation is
overly technical and less helpful than the difference to their local time.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1157
We currently use the city name for all location except named timezones.
However locations only have a city name if they are of level CITY or
DETACHED, or if they are of level WEATHER_STATION with a parent of level
CITY.
So when libgweather commit d7682676ac9 moved weather station locations from
cities to countries, it broke their names in the world clocks section.
To fix this, stop making assumptions about when we can use the city name
and simply try it first for all locations and fall back to the plain name
if its not available.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1150
After the Adwaita refresh, the button shows up oval rather than
circular. To address this, make sure that the "image-button" class
is applied as well by using the dedicated setter function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/482
Compute the source actor workarea and allocation when repositioning and keep it
cached so that we've not to calculating it again in _calculateArrowSide.
Since _calculateArrowSide only is called inside _updateFlip that is always
called just after reposition, we can be sure that the computed values are still
correct.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/435
Currently all the widgets using BoxPointer and so popup actors are always drawn
at screen origin and then shifted at paint time in the proper position.
This doesn't work when using resource scale, since the widgets need to know
in which monitor they currently are in order to use properly scaled resources.
So, basically revert commit 22c22e0d7 and go back using the actual actor
coordinates for positioning and the actor translation for animating it, as the
relayouting issues of the past seem to be gone now.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1008https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/435
Inserting a workspace is implemented by appending a new workspace, then
shifting all windows after the "new" workspace up. This has an unintended
side effect on sticky windows, as changing its workspace will unstick it.
Fix this by excluding sticky windows - there's little point in moving them
anyway, given that they should be on all workspaces (including the original
workspace and the target one).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1151
The monitor index is not something that gnome-shell and
gnome-settings-daemon seem to be agreeing about. Using the connector
string is a much more reliable method of identifying a specific screen
and we are indeed using this already for monitor labling.
So switch over to use the connector rather than the monitor index. If a
user tries to use the old API, then the OSD will simply show up on all
monitors (which is the status quo currently anyway).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/489
This API has been broken for quite some time now as the corresponding
mutter function meta_monitor_manager_get_monitor_for_output was removed.
If anyone tries to use it, we would just run into a backtrace.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/490
Selecting a screen area for a screenshot isn't the same as selecting
items in an icon view, so there's no strong rationale for picking
up the style from GTK. We stopped doing that for other elements like
tile previews long ago, so just use our own style here too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/481
Now that the existing touch/touchpad gestures in windowManager only
handle normal mode, add corresponding gestures for the overview and
hook them up to the existing workspace scroll animations.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
The window group is hidden while in overview, so the stick-to-content
animation isn't visible either. Worse, the gestures messes up the
position of window actors in that case. Just limit the gesture to
normal mode for now, we will soon add it back in the overview with
its own animation handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
The touch/touchpad gestures to switch workspace currently hard-code
the modes in which we want the gestures to work. While these modes
are correct, the existing switch animation only works in NORMAL mode,
not in the overview where the window group is hidden. The easiest way
to address this is to handle both cases completely separately, namely
use separate actions in- and outside the overview.
Make the existing usable in that way by making the list of allowed
modes a constructor parameter.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
Our weather integration is supposed to follow GNOME Weather's settings,
including its permission to use location services. However there's a
discrepancy in case xdg-desktop-portal is unavailable:
While our geoclue agent grants all applications access to location
services in that case, the weather integration treats it as if
access was denied.
Fix this by handling this case explicitly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1130
The same code for reading the current magnifier state is repeated in both
shell-recorder, shell-screenshot and magnifier itself.
So to move this inside a property of st-settings so that we can refer to it
all over the places removing duplications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/473
There's no point in keeping the cursor sprite texture around all the time,
and to listen for its changes, we just need this when the magnifier is active.
So, initialize the magnifier texture and monitor for the sprite changes on
activation, while disconnect from the signal and nullify the texture when
the magnifier is deactivated.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/443
In order to paint all the color channels of the content texture we need to
set the color channels to 255, so instead of doing this manually we can just
reuse the static color definition for white.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1020
ClutterContent's get_preferred_size should return a boolean weather the
preferred size is valid, so in javascript we've to return this state value
before out width and height.
Since this was not happening, clutter was considering the width as the state
(converting the non-zero value to true), the height as the width, while ignoring
the returned height (that was then defaulted to 0)
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1020
The default ZoomRegion is created at startup and only updated if it is active
when the monitor setup changes. Thus when reactivating the magnifier after a
display change, the viewport used is still the one that been computed with the
old screen geometry values.
Move screen update code inside a function and call it both when activating
the zoom region and when the monitor changes during a zoom session.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1120
NetworkManager added support for a new device - NMDeviceWifiP2P - but
did not add the corresponding enum value in NMDeviceType. The return
value for nm_device_get_device_type() is therefore "illegal" for the
newly added device, and gjs throws an exception.
This should ultimately be fixed in libnm, but as errors when adding
one device shouldn't interfere with adding any other devices, catching
exception is a good idea anyway, so do just that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1023
The current scripting module makes heavy use of pre-standardized
iterator/generator/promise APIs, at least for some of those support
was pulled in SpiderMonkey 58.
Port to the new standardized replacements to get the module back into
a working state.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/440
Commit 1b169655ac removed the system indicator from the list of children
that are considered for the overall menu width, because we do want the
log-out submenu to adapt to the available width.
However as a side effect, action buttons no longer contribute to the
width either, so if extensions add additional buttons, the menu is
likely to overflow.
Avoid this by only adding the button group to the list of size children.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1094
This call just went through stomping over previous drag operations if any,
_maybeStartDrag() accounted for this, but other callers (well, WindowClone
in workspace.js) don't. This must bail out early even if a drag operation is
requested, luckily all callers account for it already.
This broke shell state by preserving connected captured-event handlers if
one tried to drag multiple windows simultaneously through multitouch. We
of course don't support that, now more elegantly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/455
The bind constraint that replaced the Shell.GenericContainer in commit
f4682748fa is subtly different from the previous code:
It forces the actor to have the same size as the stage, rather than just
requesting that size.
This breaks the magnifier which relies on the UI being able to be bigger
than the display size. Fix by going back to using a custom actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/646
The texture cache now returns an actor with an appropriate ClutterContent
rather than a ClutterTexture. That actor uses the CONTENT_SIZE request
mode, which means that it will unconditionally request the preferred size
of the content. That is, setting an explicit size no longer has an effect.
Fix this by making sure the image is already loaded with the desired
dimensions.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1024
It is convenient for the OSK so it eg. doesn't appear centered in the
available space (eg. on very narrow portrait layouts), plus it will also
be convenient to align other AspectContainers to the same baseline.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/439
While it is possible to register accelerators in-bulk, there is no
proper way to unregister them again. This adds the corresponding call
for UngrabAccelerator to allow ungrabbing multiple accelerators at the
same time.
The idea is that g-s-d can use this in the future to simplify the
keybinding reload logic.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/429
Commit 8f15193b4 changed the `policy` property from a regular JS property to
a getter. This was necessary to avoid calling an overridden _createPolicy()
method before a subclass is properly initialized, but it broke the second
way of using notification sources:
Don't create a Source subclass, but use the base class directly and change
its `policy` property.
There's no good reason why we should no longer allow this, so add a setter.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/431
The dialog doesn't change the `destroyOnClose` property from its default,
so it is already destroyed automatically on close. So if we also destroy
it explicitly, we end up (rightfully) with one of gjs' infamous "invalid
access" warnings.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/430
Instead of just passing a scale when getting a cached icon, pass both a
'paint_scale', the scale of which the icon will be painted on the
stage, and a 'resource_scale', the scale of the resource used for
painting.
In effect, the texture size will use the scale 'paint_scale * resource_scale'
in a ceiled value while the size of the actor will use 'paint_scale' when
determining the size.
this would load a bigger texture, but the downscaling would keep the visual
quality.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5https://bugzilla.gnome.org/show_bug.cgi?id=765011
Ouch, this went unnoticed for a long time: As the minimum size of menu
items is generally small (because its label can be ellipsized), we are
requesting the unellipsized width of the last "size child" instead of
the widest one.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/996
Here's a template string with '/' that escaped commit 94423151b2,
resulting in an xgettext warning when generating the .pot file.
Simply move it into the resource like the other interface descriptions
to make xgettext happy again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/407
The top drag gesture is not of any use if the topmost window is not
a fullscreen window and will only block events near the important top
screen edge (i.e. the panel). To fix this, only enable this gesture if
the focus window is a fullscreen window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/552
If the user's real name is too long to fit the menu comfortably, we are
supposed to use the username instead. However since commit f8e5e3e435,
we no longer set a max-width on the menu as a whole, but instead base
the width request on only "unellipsizable" children. For some reason
the system menu ended up there, so the name is now allowed to grow
indefinitely.
Remove it from the list of size children to get the intended behavior
back.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/400
The menu grabs the key focus when opened, which takes focus away from
whichever actor triggered the keyboard. And as the menu doesn't have
any text entries, the keyboard is popped down as a result.
Prevent this by making the menu items unfocusable, so the keyboard
focus just stays where it is. Considering that the menu is part
of the on-screen keyboard itself, not being keyboard-navigatable
isn't a big deal here.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/171
Menu items use a single 'active' state that follows both hover and
keyboard focus. It therefore makes sense for the active item to always
grab the focus, in particular as an item that is sensitive but not
focusable by keynav would be rather weird.
As it turns out, we do have a case that is weird enough where we want
exactly that, so only grab focus if the actor's :can-focus property
allows it.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/171
Those functions originated in gnome-shell-extension's Convenience
module which is copied by almost every extension out there. Let's
make people's life just a little bit easier by including the code
ourselves.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/150
Window titles aren't restricted in length, so the menu may end up unwieldily
width. Commit 0bec76b6ee therefore limited the app context menus, but that
got accidentally dropped in commit 0ded0dbfd5. Add back the limitation and
extend it to the new app menu as well.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Top bar icons are supposed to by symbolic, but not all applications
provide a symbolic icon. Make the stick out less by desaturating
the appmenu icon if a symbolic style is requested.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
With the app menu being phased out entirely, there's no good reason to
keep support for the fallback app menu in decorations either - the number
of applications that set an app menu and haven't embraced client-side
decorations is extremely small, and they should already have alternative
fallbacks for non-GNOME environment in place.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Since the plans to retire the app menu were announced, nobody objected to
the removal of the menu content, however some concerns were raised about
the menu's secondary role as indicator.
Account for that by not removing the existing app menu, but replacing it
with a built-in menu similar to the existing app icon context menu.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
The GtkSettings was originally introduced to inform applications about
the desktop shell's capabilities, but users soon started to use it to
force GTK+ to show the app menu inside the application. We eventually
caved and also handled the setting ourselves to hide the in-shell app
menu to allow users to "move" it.
But now the remote app menu is in the process of being retired[0], and
will be replaced with a simple indicator that cannot be moved, so
stop following the GtkSetting.
[0] https://gitlab.gnome.org/GNOME/Initiatives/wikis/App-Menu-Retirementhttps://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Certain keybindings should continue to work even when a popup
menu is on screen. For instance, the keybinding for showing
the app menu and the keyinding for showing the calendar are
examples.
This is achieved by putting in place a special "POPUP" action
mode, whenever a popup menu is active. This mode replaces
the (e.g., "NORMAL" or "OVERVIEW") action mode that was in place
for as long as the popup menu is active.
But those keybindings should not work when the user is at the
unlock dialog (which uses an action mode of "UNLOCK").
Unfortunately, since commit c79d24b6 they do.
This commit addresses the problem by forcing the action mode
to NONE at the unlock screen when popups are visible.
CVE-2019-3820
Closes https://gitlab.gnome.org/GNOME/gnome-shell/issues/851
We shouldn't allow toggling menus that aren't supported by the
current session mode, but as indicators are hidden rather than
destroyed on mode switches, it is not enough to check for an
indicator's existence.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/851
This keyboard works similar to GTK+'s emoji chooser (actually, both pull
from the same JSON file). Emojis are categorized in sections and variants
and kept in a "model".
The EmojiPager actor then uses this model to generate pages on-the-fly as
the user swipes around. This is an important optimization since the amount
of actors would rival with the rest of the shell otherwise.
The EmojiSelection object puts the EmojiPager, the page indicators and
a KeyContainer with the bottom row of emoji section shortcuts together to
implement the emoji panel as a whole.
The Keyboard object hooked this to an "emoji" key, which is just visible
on the Clutter.InputContentPurpose where showing an emoji would be
meaningful. Otherwise the surrounding buttons are made a bit wider to
cover up for it (i.e. as it was before).
In order to cater for emoji panel usage, we want something like PageIndicators
except:
- It should have horizontal disposition
- It should not be animatable (?)
- It should not be reactive
Separated PageIndicators into a base, non-animated widget, and an
AnimatedPageIndicators that can be used on appDisplay.js. Reactiveness is
set through an extra method, and layout is set as a construct argument.
This will be useful as we want other panels (eg. emoji) to preserve aspect
ratio with the rest of the OSK. Separate the aspect ratio management logic
into this container that will be the parent of them all.
Since commit 447bf55e45 we turn the top bar translucent when
free-floating. While this looks fancy and reduces the appearance
of cutting into the available screen space, it has also had a
negative effect on legibility.
Nobody stepped up to address those issues in two years, so revert
back to the fully opaque top bar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/408
While the current textual forecast is non-intrusive, it may be too
much so, making it less effective to spot the current conditions
at a glance.
Refresh the section to use a more conventional graphical representation,
similar to the one used by gnome-weather itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/262
Having Unity-like shortcuts for activating the first nine applications
in the dash has been a long requested feature, but somehow nobody got
around to implement it.
As the shortcut is most useful outside the overview where the dash is
not visible, only consider favorite apps as they have a predictable
order.
https://bugzilla.gnome.org/show_bug.cgi?id=648000
Since the overlays we show on hover above the window clones are no
longer only a close button, but the window title, a border and a close
button, rename a few variables so it's easier to understand what they're
for.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/346
Currently when a preference widget fails to load, we throw a raw
backtrace at the user. While that is undoubtedly useful information
for extension developers and bug reports, it is gibberish to most
users and hardly the first thing they should be exposed to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/193
In order to replace GTK+'s GtkDirectionType. It's bit-compatible with it,
too. All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
In order to replace GTK+'s GtkPolicyType. It's bit-compatible with it, too.
All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
This is actually papering over bugs in toolkits. On X11 the Xserver will
send crossing events when the stage input shape changes. As those go
end up ignored in GTK+, this warp call aims (and randomly manages) to send
a motion event that wouldn't go unlistened by the drag source window (the
one holding the grab).
This bug actually manifests in other ways, eg. by changing the window
beneath the pointer with alt-tab while DnDing. This should be fixed
altogether in the client side.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
This gdk_display_sync() call was added in commit a40daa3c22 so the alt-f2
dialog is able to spawn commands that trigger grabs on startup (eg. xmag/
xkill).
This seems worthwhile to do only on the X11 backend, and handling it in
mutter backend code seems cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
Allow notifications to set a x-gnome-privacy-scope hint, with values in
['system', 'user']. If all the notifications in a particular source hint
that their privacy scope is ‘system’, don’t hide the notification
details on the lock screen.
This is aimed at fixing the particular case of power notifications: they
contain information which is not private to the user (it relates to the
system: battery state or AC state, which is obvious to anyone who can
see the machine), so hiding the details of a power management
notification when the screen is locked is pointless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/issues/726
Most often it is a bug if the condition part of a for-loop contains the
assignment operator rather than the comparison one, so tools rightfully
emit a warning.
Clarify that the assignment is intentional in this case by adding
parentheses.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
Just like the "in" operator in the previous patch, "instanceof" has
a lower precedence than negation, resulting in the nonsense condition
of "true instanceof BaseIcon".
Add parentheses to get the intended behavior.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
The "in" operator has a lower precedence than negation, so we are
actually testing whether the favorites map contains "false".
Add parentheses to get the intended behavior.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
The Magnifier class uses a small subtree of actors to track the
current cursor's position and sprite. Specifically, it uses the
deprecated ClutterTexture to paint the cursor sprites.
Add a new, very simple ClutterContent implementation to track the
cursor sprite, and replace the ClutterTexture by a ClutterActor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/371
The last patch in the series, this one adapts StShadowHelper
to received a CoglFramebuffer. This is where we first touch
JavaScript with Cogl types, and as such, it depends on the
latest Mutter. Earlier versions of Mutter didn't have its
Mutter-Clutter GIR to generate types for various Cogl types.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
With the recent port to JS6 classes, the trailing
comma after functions in the syntax of classes has
been removed.
However commit c2961f21 accidentally reintroduces
one trailing comma after a newly created function,
leading into g-s throwing an exception and not
starting anymore.
Therefore, remove this trailing comma to solve
this problem.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/366
Besides the device grab on the drag device, also set up a captured-event
handler to catch other devices (except the keyboard) while the DnD
operation is ongoing. This makes DnD operations exclusive to others.
Also, disallow it in less aggressive ways if maybeStartDrag() gets called
while there is a current draggable.
This might definitely be nicer (eg. having other grabbed devices emit
leave/end events), but can't be done without major surgery to Clutter.
In the case where the draggable has an actor of its own, state could be
left broken when dragging on a place that would not accept the DnD op.
After button release, drag state is set to "cancelled" and the animation
begins. After the animation is finished, the drag actor would be destroyed
before disconnecting from its destroy handler.
Within the destroy handler, the grab would be undone but drag state would
be left on "cancelled" state for subsequent operations. This results in
DnD oddities and stuck grabs.
In order to fix this, double check in the actor destroy handler that we
are actually dragging before setting the "cancelled" state.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/540
Instead of fetching the CLUTTER_POINTER_DEVICE device. It will
be wrong if drags get initiated from tablet pointers. This allows
for DnD operations to be started, moved, and more importantly
finished through tablet devices.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/540
Whenever the AllView needs (re)populating, we used to do one general
g_app_info_get_all() to get all GAppInfo, plus one per app folder in order
to check the ones that fall within that category. This calls results in a
fair amount of I/O blocking the main loop.
In order to ease this, keep the GAppInfo list around in AllView, and make
the AppFolders use it when figuring out the contained apps. Since reloading
the AllView results in AppFolders regenerated from scratch, the app info
list is ensured to be up-to-date for any later change within the AppFolder
(eg. through the GSettings key changing).
As the list was already filtered in the first place, we can also remove
the try{}catch() in AppFolder in order to discard desktop files with
invalid encoding.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/832
When connecting to a Wi-Fi router that supports the WPS button method
(PBC, push button connection) the user can simply press the button on
the router. Show an explanation in the PSK prompt when this is
possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/329
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When using dynamic workspaces, it is possible to try to change to a
non-existent one if the user defines hotkeys for changing to desktop
1, 2, 3... This case is not detected, and gnome shell shows an error:
JS ERROR: TypeError: workspace is null
actionMoveWorkspace@resource:///org/gnome/shell/ui/windowManager.js:2130:13
wrapper@resource:///org/gnome/gjs/modules/_legacy.js:82:22
_showWorkspaceSwitcher@resource:///org/gnome/shell/ui/windowManager.js:2104:13
wrapper@resource:///org/gnome/gjs/modules/_legacy.js:82:22
This patch adds a check before trying to change the workspace, to avoid
switching to a non-existent one.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/365
When an InputSourceIndicator is destroyed, the InputSourceManager it was
connected to could (and probably will) outlive it (since the manager is
a singleton). If the InputSourceManager emits any subsequent signals,
the callbacks from the finalised InputSourceIndicator could be invoked,
and will reference finalised objects.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Otherwise the user object could outlive the dialogue, emit a subsequent
signal, and the callback from that signal could reference finalised
objects/widgets from the dialogue. The likely mechanism for the user
outliving the dialogue is caching of user objects within
libaccountsservice.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Rather than explicitly destroying the session after calling close(),
destroy it from the `closed` signal handler.
This also means we can make the method internal.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
In case there are any internal ways the dialogue can close itself
without calling its own close() method, it’s probably better to do all
our cleanup on a handler for the `closed` signal instead.
This should introduce no functional changes except ensuring the
polkitAgent cleanup is always done.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Otherwise the session could outlive the dialogue, emit a subsequent
signal, and its callback would reference finalised objects/widgets from
the dialogue. The PolkitSession object is implemented by
libpolkit-gobject, so we have no guarantees about its reference counting
— the session object could keep itself alive in another thread, or be a
singleton. In all likelihood, the session hangs around for longer than
the dialogue due to differences in when the two objects are garbage
collected.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
This avoids the following warning sometimes happening later:
JS WARNING: [resource:///org/gnome/shell/ui/search.js 701]: reference to undefined property "searchInProgress"
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
The built-in calendar isn't meant to replace a full-fledged calendar
app, which is why clearing event messages only hides the event in
gnome-shell rather than deleting the actual event. This has turned out
to not be overly useful and often confusing - it creates a discrepancy
with visible events in apps, isn't revertible in a non-obscure fashion
and non-obviously limited to the current date.
As we are considering moving events out of the message list and back to
the calendar, it looks like a good time to remove that ability and keep
notifications as the only removable messages.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/262
We currently deliberately avoid chaining up in derived policy
constructors to not override properties with their defaults.
That's a neat trick that will stop working when porting to ES6
classes, as chaining up is necessary to actually initialize the
object there (including "this").
Address this by turning all properties into (overridable) getters
that are backed by private properties by default.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/350
The _createPolicy() method of a subclass usually depends on some
constructor parameters that need to be set before chaining up to
the parent. This works fine with Lang.Class, but will break with
ES6 classes, as "this" is only initialized after chaining up.
Prepare for this by not creating the policy in the constructor,
but when it is first accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/350
Check via Polkit if the current user is actually allowed to enroll
devices before trying to do so. If not, show a notification that
explains that a system administrator needs to authorize the device.
Clicking on the notification will guide the user to the thunderbolt
control center panel. Before this patch, when the current user was
not allowed to enroll a device a polkit dialog would pop up which
is confusing because it did not contain any information why it was
shown. This patch implements the behavior as designed (see [1],
section "Multi-user environments").
[1] https://wiki.gnome.org/Design/Whiteboards/ThunderboltAccess
Since commit 5fb8d4f730, a NotificationMessage's notification property
is reset to null when the notification is destroyed. However at that
point we still have connected signal handlers around that we'll try
to disconnect later.
Avoid the warnings by disconnecting and resetting the handler IDs at
the same time as the notification.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/308
In contrast to generic animated icons, it is reasonable to expect
spinners to be invisible while inactive. Implement that behavior
in the new Spinner class and optionally animate the transitions.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/316
When `ibus restart` runs, InputMethod.enabled is changed to false
and no longer enable ibus but 'enabled' and 'disabled' signals
are not used in the current IBus clients and it's good to delete
the member simply.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/295
If the session mode doesn't allow access to Settings, the language
menu should respect that and not expose the "Region & Languages"
panel. Using the dedicated method instead of manually constructing
the menu item takes care of that and makes for less code.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/780
The picked target actor may be destroyed (e.g. hover style change
resulting in the ClutterTexture to be destroyed). If we don't handle
this, GJS will abort when it sees the exception caused by Javascript
code trying to access the destroyed target actor.
To handle it, listen on the 'destroy' signal on the target actor, and
repick, so a valid actor is passed to the next motion callback.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/632
When a fullscreen application is focused,
toggling the overview via hot-corner is disabled,
even when the overview is currently visible.
This only makes sense, when the overview is
hidden to not to disturb the behaviour of the
fullscreen application, but leaves an
inconsistency when the overview is visible since
it should work there like when a non-fullscreen-
application is focused.
So, always allow hiding the overview using the
hot corner when the overview is visible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/429
The `GetWindows` method gives access to the list of windows for each
application with some of their properties, so utilities such as dogtail
can pick the window of their choice to interfere with using the provided
window id.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
Add a D-Bus API that allows the API user to introspect the application
state of the shell. Currently the only exposed information is list of
running applications and which one is active (i.e. has focus).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
The intention of commit 4dc20398 was to disable unredirection while
banners are shown, but the ::done-displaying signal currently used for
re-enabling unredirection is only emitted under some circumstances, so
it's possible that unredirection is left disabled indefinitely, whoops.
Fix this by tying disabling unredirection explicitly to the lifetime
of the banner actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/799
The only reason for `vfunc_paint` and `vfunc_pick` existing was to
implement a culling optimization. Although that optimization actually
made performance worse than none at all because it forced the painting
and picking cycles to spend more time calling into JavaScript.
Turns out we don't have to choose between native code and culling though.
Just reimplement the culling using native ClutterActor functions and we
get the benefits of both.
Performance on an i7-7700:
Moving the cursor over the icon grid:
Before: 70% CPU, 5.5ms per frame
After : 60% CPU, 4.5ms per frame
Scrolling the icon grid:
Before: 60% CPU, 4.4ms per frame
After : 50% CPU, 3.3ms per frame
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/174
Destroy the DashItemContainer's child from the same handler as the tooltip. This
will prevent invalid reads when the item is destroyed while its quicklist is
still open.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/781
Since commit 551e827841, we don't always pass a callback parameter.
However passing it on as undefined to ibus doesn't work, as gjs doesn't
accept that as a valid callback value and throw an error. As a result,
we can end up with no layout selected in the keyboard menu and an "empty"
indicator. Fix this by explicitly passing null if no callback has been
provided.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/293
Back in the day, there was a proposed system of tracking apps in a
specific context.
The inspiration was that you may have used apps in multiple modes:
Firefox may have been used in both "Programmer Reference" and
"Kitten Videos" contexts. Early user response to the feedback wasn't
too positive - context switching is something that humans have trouble
doing implicitly, let alone explicitly. The old codebase still has a
few remnants of this around; let's finally put them to rest.
Note that we still write out a dummy context tag to the XML file - old
versions of the shell will flat out crash if you don't have one of those
in there, so just leave it in for compatibility sake.
https://bugzilla.gnome.org/show_bug.cgi?id=673767
The pending-charge state means AC power is on but the battery is not
being charged. This can happen because its charge is above a certain
threshold, to avoid short charging cycles and prolong the battery's
life, or because the PSU is not powerful enough to charge the batteries.
Instead of lying to the user about something being estimated, we should
simply tell the truth and set the label to "Not Charging".
Closes: #701.
When we started to only show a single caption at a time, we allowed
title captions to be wider than their corresponding window preview.
But while overlapping neighboring previews is fine, we shouldn't
allow the captions to leak outside the workspace area itself and
overlap unrelated elements like workspace switcher or dash.
This partly reverts commit b3b30f239d.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/214
Instead of defaulting to a natural scroll behavior,
have the workspace switch action use the natural-scroll setting
in org.gnome.peripherals.touchpad to determine the correct
direction of travel when swiping. 4 finger swipes will then
match the behavior of the rest of the UI.
Reference: https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
While this sounds counter-intuitive, the image-path hint value might also
be used with URIs or icon names.
As per freedesktop standard:
The "app_icon" parameter and "image-path" hint should be either an URI
(file:// is the only URI schema supported right now) or a name in a
freedesktop.org-compliant icon theme (not a GTK+ stock ID).
Thus the image-path hint should also be parsed as it happens for the
app_icon.
Reuse same logic, by falling back on _iconForNotificationData with the
hint value.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/285
We have a callback that will call close() when the notification is
destroyed, and a callback that will call destroy() on the notification
when the message is closed.
Currently, if the notification is destroyed we'll execute our callback
that will call again destroy() on the notification. That's bad
practice in general, and it also has the side effect of resetting the
destroy reason.
This commit avoids re-destroying the notification by dropping the
notification reference on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/258
Differently from the fd.o notifications, Gtk notifications do not
have a mechanism to update themselves. Instead, when a new
notification is received for an ID already known to the notification
daemon, the old notification is dismissed and a replaced with a new
one.
Currently though, there is no way to distinguish a notification that
was dismissed because of an user interaction, or because it was
replaced. That is an useful piece of information, so add a new value
to the NotificationDestroyedReason enum to account for it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/258
When gnome-shell receives the signal of 'set-content-type' from ibus,
gnome-shell calls KeyboardManager.holdKeyboard() and
KeyboardManager.releaseKeyboard() and the functions change the current
input focus in GNOME Xorg and it could result in closing a popup window
which has a password entry by focusing on the entry.
The solution is to stop to call the APIs on 'set-content-type' signal.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/391
We don't usually show notification banners while the monitor is in
fullscreen, but when we do - the notification is urgent - we should
actually show the banner, even if the top-most window is unredirected.
To achieve that, disable unredirection while the banner is showing.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/430
The `reactive` property of icon actors was being restored multiple times
over the course of the pulse animation, all at slightly different times
as each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a pulse animation, limiting its smoothness and performance.
The solution is to not toggle the `reactive` property in the pulse
animation at all, which avoids incurring multiple full stage relayouts.
As a bonus, this means the icon under the cursor pulses with the correct
selection highlight, appearing more seamless and responsive.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/261
The `reactive` property of icon actors was being restored 24 times over
the course of the spring animation, all at slightly different times as
each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a spring animation hogging the CPU and limiting the frame rate.
The solution is defer and batch the cleanup for all icons until after the
last icon has finished animating. This way the CPU impact of the style
change and stage relayout isn't felt during the animation so the frame
rate remains higher and smoother. The overall CPU usage of the animation
is also reduced as the remaining relayouts are much more likely to be
grouped into a single frame.
Icon spring animation performance on an i7-7700:
Before: 83% CPU and 47 FPS
After : 78% CPU and 54 FPS
which is about a 22% increase in performance per clock (FPS/CPU).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/253
The switcher popup is a large, mostly transparent actor that
should cover all the clickable area of GNOME Shell. In Clutter
terms, it should cover the whole stage.
By binding it to the primary monitor, the Alt+Tab behavior
becomes a bit inconsistent. For example, by not hiding when
clicking at empty spaces at other monitors.
Fix that by binding the SwitcherPopup to the whole stage,
and not only the primary monitor.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/647
If no password or a wrong password is entered after automounting an
encrypted device, then the password should be reasked. However, this
does not happen because the relevant udisks error messages for this
cases are missing in the exception handler that calls _reaskPassword.
Fix this issue by adding the relevant udisks error strings to the
exception handling in the _onVolumeMounted method.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/640
Fix a regression causing the portal helper to crash.
In 94423151b2 we moved the dbus interface
descriptions into seperate files which is why we had to include the
fileUtils js module. This module imports the params js module, so add
params.js to the gresources file for the portal helper.
We currently only ignore minimized windows, not windows that are
hidden for other reasons - namely on wayland windows are initially
hidden until they are placed.
This fixes a flicker in the transparent top bar on wayland when the
"position" of an unplaced window wrongly suggests the window is
overlapping the top bar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/693
Since we started to show OSD windows on all monitors, OSD windows are
destroyed when the corresponding monitor is disconnected. We shouldn't
leave any signal handlers around in that case - they prevent the object
from being garbage collected, and trigger warnings for accessing proper-
ties of invalidated GObjects.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/602
When maxLevel is > 100%, first OSD appearance was capping the current
level to 100%. Consecutives key press were then OK.
Ensure we setMaxLevel before setting Level itself, so that correct cap
value is applied.
App folder popups take a grab when opened, and as we don't pass any
particular pushModal() parameters, all keybindings are blocked. While
this makes sense for most keybindings that would interfere with the
popup interaction, others like volume/brightness keys or screenshots
can be allowed safely.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/648
Add exception to handle a keypress if numlock is enabled as we already do for
capslock. This uses Clutter.ModifierType.MOD2_MASK because at the moment there
is not a more explicit way to refer to the numlock mask.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/550
Instead of taking care of the PanelMenu.ButtonBox.container
destruction by itself, delegate that to the very object that
created it in the first place: PanelMenu.ButtonBox itself.
This is the last remaining usage of Shell.GenericContainer
in the codebase, and posed small challenges compared to the
other removals.
A new St.Widget subclass called InputSourceIndicatorContainer
was added as a replacement to the Shell.GenericContainer. It
was needed because GNOME Shell needs to override the regular
size allocation functions, but InputSourceIndicator already
is a St.Widget with its own size allocation overrides.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Because we're late in the cycle, and don't know how many
extensions actually rely on this API, this commit adds
back the BoxPointer.show() and .hide() functions, with
warning messages to notify consumers that this is going
to be removed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Pretty much like dd4709bb2, BoxPointer's show() and hide()
functions will clash with Clutter.Actor's ones.
In addition to that, on a conceptual level, the current API
is not great, because calling boxPointer.hide() won't result
in boxPointer.actor.visible == false.
For these reasons, rename show() and hide() to open() and
close(). A compatibility layer will be added in a following
commit, warning about the usage of show() and hide().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
LayoutManager is currently a pure JavaScript class that
relies on the rudimentary Signals.addSignalMethods() to
handle signals. This is an inefficient implementation of
one of the most central classes in GNOME Shell.
In addition to removing Shell.GenericContainer, then,
turn LayoutManager into a proper GObject.Object subclass.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
In the next commit, we will turn PanelMenu.ButtonBox into a
St.Widget subclass. As a domino effect, PanelMenu.Button will
become one too, and so will Panel.AppMenuButton.
When that happens, the current show() and hide() functions in
Panel.AppMenuButton will clash with Clutter.Actor's ones.
To avoid that, rename these functions to fadeIn() and fadeOut()
and avoid a name clash.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
This is another straight port from Shell.GenericContainer.
The important thing to notice is that the calculation is
broken if the StThemeNode helpers (adjust_preferred_* and
adjust_for_*) aren't used.
The downside of this patch is that it removed the skip_paint
from the thumbnails. Keeping it would add an unecessarily
large amount of code.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Removing Shell.GenericContainer from the IconGrid class was
challenging because it needs the "skip paint" API from it.
This API was added, too, as a workaround to the inability
to override vfuncs from GJS.
The overrides are largely copy-pasted and translated versions
of the Shell.GenericContainer code.
The IconGrid:key-focus-in signal was renamed to :child-focused
to avoid clashing with ClutterActor:key-focus-in.
In GridSearchResults, the internal IconGrid had it's y_expand
set to false, so it doesn't push other search elements (the
list results mainly) to the bottom of the screen.
Because skip paint wasn't and still isn't a GObject property,
rename it to _skipPaint to reflect that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
As part of our quest to obsolete Shell.GenericContainer, IconGrid will
become a Clutter.Actor subclass. As the ::key-focus-in signal would
clash with Clutter.Actor::key-focus-in, rename it to ::child-focused.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
DashItemContainer currently animates the scale and opacity
of its child when zooming in. This is visible when adding
a new favorite item to the dash; the items will zoom in from
the center.
After the previous commit, however, the zoom animation got
slightly broken, and looked like the icon was coming from
the bottom instead of the center.
Fix that by setting the scale and opacity of DashItemContainer
itself, instead of its child. Remove the unused code after that
too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Pretty much like the previous patches, this extends St.Bin. The
most interesting aspect of this patch is that most of the sizing
routines of the icons is now delegated to the actors and layout
managers, removing quite a bunch of code.
The 'spacing' theme property is now redirected to StBoxLayout's
spacing property. Also adjust the Dash code to stop forcing a
potentially invalid width in the first icon too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
This commit removes all the uses of Shell.GenericContainer from
SwitcherPopup.SwitcherList. Compared to the other patches, this
one was specially trickier to get right, and a few invasive
changes needed to be done.
The most noticeable one is that the allocation of the items is
done entirely by St.BoxLayout -- we don't manually allocate them
anymore. To make it work, get_preferred_width() had to calculate
the correct value. It now assumes that:
* Minimum width: the minimum width of the widest child.
* Natural width: the minimum width of the StBoxLayout (use it
instead of the natural width to force the labels to ellipsize
when too long.)
The AppIcon class became a St.Widget subclass as well, to override
get_preferred_width() and be able to keep the squared shape.
Besides that, add a new SwitcherButton class to reimplement squared
icons without having to resort to hacks in the size allocation
machinery. This class has a single vfunc override to ensure that it
is squared when the SwitcherList is.
The arrows indicating multiple windows are now in this._list
actor to the SwitcherPopup itself, since this._list automatically
manages its own children now.
At last, adapt (but preserve) the hack in CyclerPopup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Instead of overriding vfunc_get_preferred_width|height(), use the
already available Layout.MonitorConstraint to bind SwitcherPopup
to the primary monitor.
This commit turns SwitcherPopup.SwitcherPopup into a St.Widget
subclass, and gets rid of Shell.GenericContainer usage. Subclasses
were adapted to that too.
This class introduced a new challenge: it overrides show(). As per
discussions, we now call this.visible = true inside show().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
In the process of purging all usages of Shell.GenericContainer
of GNOME Shell, one specific problematic situation that might
occur is when classes have functions that would clash with any
ClutterActor or StWidget function name.
One of such example is SwitcherPopup.destroy(). Right now, this
class is a pure JavaScript class that wraps a real actor, but
soon this will change, and it'll become a St.Widget subclass.
Another problem with functions that mimic the toolkit ones is
the predictability of them; after calling destroy(), that widget
is expected to not be available anymore. In SwitcherPopup case,
it is still available for a short while. In this case, that's not
a big problem, but the show() and hide() functions in other clases
are more problematic because the actor's visibility does not
follow that.
This commit is a first step in cleaning that up, and changes the
SwitcherPopup.destroy() to fadeAndDestroy().
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
Shell.GenericContainer exposes the size negotiation machinery
through the use of signals. Signals are not specially performant.
One of the reasons is that they acquire a global lock for signal
handlers lookup. GNOME Shell has more than 2,000 actors at any
given point in time, up to 20 levels deep in hierarchy, making
size negotiation and painting non-trivial tasks. Such a critical
section of Clutter's machinery shouldn't rely on signals
whatsoever.
Regardless of that, Shell.GenericContainer is a workaround to
a non-existing issue anymore. It shouldn't be used anyway, and
any performance improvements that removing it can potentially
yield are bonuses to it.
This commit starts this work by removing Shell.GenericContainer
usage from Panel.Panel class. The class now extends St.Widget,
and as such, it has no "this.actor" field set anymore. A couple
of places where this actor field was used are adjuste as well.
It is important to notice that we now allocate the Panel itself
inside vfunc_allocate(). This was previously done before emitting
the signal by Shell.GenericContainer.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
ClutterVirtualInputDevice has the limitation that event flags won't be
made to contain CLUTTER_EVENT_FLAG_INPUT_METHOD, possibly causing feedback
loops.
As the event gets injected up the platform dependent bits, we can avoid
care on not pressing the same key twice, we still expect coherence between
key presses and releases from the IM though.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/531
When adding a favorite, we add the ID to the list of favorites, save the
setting and add the new app to the favorites map. However as writing the
settings value already results in reload() to update the favorites map,
the new app is usually already in the map when we add it.
The only exception is when the ID was found in the RENAMED_DESKTOP_IDS map,
in which case we end up adding both the renamed app and the original one.
Fix this by simply relying on reload() to properly update the map, just like
we already do in _removeFavorite().
https://gitlab.gnome.org/GNOME/gnome-shell/issues/471
On X11, reactive chrome must be added to the input region in order
to work as expected. However that region works independently from
any window stacking, with the result that the unresponsive-app dialog
currently blocks all input in the "covered" area, even in windows
stacked above the unresponsive window.
The correct fix would be to track the unobscured parts of the dialog
and set the input region from that, but that's quite cumbersome. So
instead, only track chrome when the corresponding window is focused
(or the dialog itself of course).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/273
As a mount operation's UI may be reused (for example after mistyping
the password), we only close the operation once the mount has finished
(successfully or with error).
We therefore need to track ongoing operations, which we currently do
by monkey-patching the corresponding volume object. However while the
underlying GVolume object indeed remains the same through-out the
operation, the JS wrapper object isn't referenced anywhere and may
thus be garbage collected, resulting in a stuck dialog.
Fix this issue by tracking active operations explicitly, so that all
involved objects are referenced until the end of the operation.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/565
Whenever a command runs in the run dialog, it
will be added to the history unless it is
already the last entry. This does not apply
for entries that are not consecutive, which can
result in long chains of commands which
alternate, e.g. lg, r, lg, r, lg, r. Not only is
this wasteful in terms of space, but also
inconsistent with how history works elsewhere,
e.g. in the shell.
Therefore, remove entries in the history that are
equal to the one that will be added to the end of
of the history when the entry already exists.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/524
The `hints` and `settingName` parameters to the agent call may define
the specific list of secrets NM actually needs from the user. This
seems to have been the intended use of these two parameters but only
recently did NM with the IWD backend start to use this to request 802.1x
secrets. So if `hints` is provided, ask user for the specific secrets
listed there and don't even look at what type of EAP method is in use.
Only the three types of secrets actually in use by NM's IWD backend are
supported for now -- they happen to be the same three that
_get8021xSecrets() had already supported.
This attribute was previously only assigned in show(). hide() compares
this attribute to 0. If hide() is called before show() is first called,
the comparison would give the correct result (undefined > 0 is false)
but log a warning:
JS WARNING: [resource:///org/gnome/shell/ui/workspacesView.js 529]:
reference to undefined property "_restackedNotifyId"
Initialize this attribute in _init(), alongside _scrollEventId and
_keyPressEventId which are also used in hide().
dialogContent is set to one of the elements of the list DialogContent,
but not all of those have a checkBoxText property. When logging out (as
opposed to shutting down), this causes a warning:
JS WARNING: [resource:///org/gnome/shell/ui/endSessionDialog.js
763]: reference to undefined property "checkBoxText"
(The line number corresponds to this line in 3.28.3.)
The warning is apparently not triggered if the undefined property is
used as part of a boolean expression:
gjs> var x = {};
gjs> x.a;
typein:2:1 strict warning: reference to undefined property "a"
gjs> if (x.b) { log('oh no'); }
gjs> x.c || ''
""
_setCheckBoxLabel() just checks the truthiness of its 'text' argument,
and the empty string is false-y, so passing '' rather than undefined has
no functional effect.
In recent Fedora 29, connecting to wifi access points from the
user menu (top-right menu) does not work. Clicking the 'Connect'
button just animates it but does nothing else. The logs show an
error "JS ERROR: Error: Expected type utf8 for Argument
'specific_object' but got type 'undefined'".
Looking into this, it seems the problem is these uses of the
`path` property of an NMAccessPoint. NMAccessPoint inherits
from NMObject, and NMObject *does* have a path property:
https://developer.gnome.org/libnm/stable/NMObject.html#NMObject--path
so at first glance this seems fine. But I poked around a bit
using libnm via Python (which goes via introspection, just like
this JS code does), and found that indeed AccessPoint objects
don't seem to have a `path` property there either.
Looking at the libnm code, this actually makes sense, because
the property is marked "(skip)":
https://github.com/NetworkManager/NetworkManager/blob/master/libnm/nm-object.c#L1291
and the introspection docs suggest that means it should be left
out of introspected output:
https://wiki.gnome.org/Projects/GObjectIntrospection/Annotations#Symbol_visibility
I'm a bit concerned that this was only found recently - whereas
the change to use `.path` in gnome-shell dates from October 2017
(d71af5e5) and the property has been marked (skip) in NM since
at least 2016 - but this all seems to add up. The obvious fix is
to replace use of `.path` with `.get_path()`, which returns the
path and is *not* marked (skip) and so *is* available via
introspection. I tested that this works in Python and also did
a test build of gnome-shell with this change and installed it on
an affected system, it does seem to fix the bug.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
gjs's D-Bus convenience explicitly expects a string representation
of an interface, but the new convenience method to load an XML
description from a resource introduced in commit f42d9df3e0 only
returns a string when using gjs from the GNOME 3.30 release. We
have so far managed to keep compatibility with the previous stable
gjs release, so fix up the fallback code to cast to string.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/578
Commit dbf993300a moved all inline D-Bus interface descriptions to template
strings so we can stop escaping line breaks.
Unfortunately that unveiled a grave bug in xgettext, which currently cannot
handle files that contain both backtick and slash characters - as a result,
translations from affected files have started to disappear as translators
run xgettext/msgmerge.
Instead of reverting the change and getting the crusty escaping back, we
will take this as an opportunity to stop inlining the XML altogether and
load it from a resource instead.
To facilitate that, add a small helper method that loads a D-Bus interface
description from a dedicated resource bundle.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/537
In GNOME-3.24, pressing Super+P or a similar function key would cause
a switch to the next available monitor configuration.
However, in GNOME-3.26, this was reimplemented in mutter and gnome-shell
and the behaviour is now different: pressing Super+P and releasing will
cause no change in montor configuration[1]. In this new design you have
to press Super+P and keep holding Super in order to keep the switcher
open, then press P again (or use the arrow keys or mouse) to
select the next one in the list.
This is incompatible with many Asus products such as Asus X530UN, where
pressing the presentation mode media key (Fn+F8) actually generates
the following keypress events from the keyboard controller:
Fn pressed: nothing
F8 pressed: nothing
F8 released: Super press, p press, p release, Super release (quick burst)
Fn released: nothing
With this firmware behaviour it's not possible to hold the keys and have
the dialog come up so that you can select another new mode.
To solve this, when the switcher is opened, select the next available
display config by default, which is more similar to the pre-GNOME-3.26
behaviour. Now pressing Fn+F8 on this laptop will result in the display
mode switch taking place.
[1]: The mentioned desired behaviour will at least happen after
https://gitlab.gnome.org/GNOME/mutter/issues/281 has been fixed
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/208
Since we always keep the active workspace until the user switches
to a different one, we may end up with two empty workspaces at
the end. It's not obvious to users why this happens, and there's
indeed no good reason for the behavior - just remove the trailing
workspace in that case.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/536
Meta.ScreenDirection no longer exists. This fixes window menus on
multi-monitor systems.
JS ERROR: TypeError: Meta.ScreenDirection is undefined
_buildMenu@resource:///org/gnome/shell/ui/windowMenu.js:135:17
`NMConnectionDevice._sync()` is responsible for setting up the active
connection that we'll end up displaying. It expects the active
connection to already be in a map `_connectionItems`. If it isn't in
there, we get a null dereference and the indicator can get into a weird
state where it doesn't display devices / connections properly.
Let's change this expectation. If there is an active connection,
`_deviceAdded()` will eventually get to it and call `_sync()` to set up
the active connection state. We make `_sync()` tolerate there being no
active connection when it's called.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/140
We must remove the GFile reference from the representing object when an
extension has been unloaded as this won't be used anymore later (e.g. as cached
ref).
Throw an error using an informative message in case a mode uses a stylesheet
that can't be loaded, instead of crashing later because the theming can't be
properly computed, and thus the minimum size of the actors.
We currently assign the stylesheet to an extension whenever the file exists,
regardless of whether it actually loaded successfully or not.
And thus we load an extension that ships a stylesheet even if that file can't
be used.
There is no point in trying to load an extension if its stylesheet wasn't
loaded in the first place, so make sure this happens only on success.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/188
Ensure that the search provider operations (just getResultMetas requests
in the current implementation) in progress are properly cancelled when we
clear the UI, otherwise returned results might still be added when not
needed.
This is triggered for each provider by the SearchResults reset.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
Currently when the overview is hidden, any pending search is kept alive,
not only at remote search provider level (as per issue #183), but even
the shell providers proxies continue to get and process data. This happens
even if this is not needed anymore, while the UI reset is performed only
next time that the overview is shown (causing some more computation
presentation time).
In order to stop this to happen, when the overview is hidden, we have to
unset the search entry to an empty value as this would make SearchResults
to have empty terms list and that would make the proxies cancellable to
be triggered (without causing any further search to start).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/205
If the volume is removed before AUTORUN_EXPIRE_TIMEOUT_SECS seconds, we can stop
the timeout earlier as there's nothing to unset, while the volume instance
won't be valid anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
The _sync function for Message only updates the close button visibility,
so we can safely stop doing that if the close button get get destroyed earlier
(as it happens when clicking on it).
https://bugzilla.gnome.org/show_bug.cgi?id=791233
We need to avoid that we use the _dragActor instance after that it has
been destroyed or we'll get errors. We now set it to null when this
happens, protecting any access to that.
Add a DragState enum-like object to keep track of the state
instead of using booleans.
Remove duplicated handler on 'destroy' and just use a generic one.
https://bugzilla.gnome.org/show_bug.cgi?id=791233
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code had bad typos in it, though: it reuses the `i`
index variable in its inner loop, where it should be using
the `j` index variable.
This commit corrects the i/j confusion.
The object manager tries to synthesize interface removal
events if the bus name of a remote object drops off the bus.
The code has a bad typo in it, though: it confuses `objectPaths`
(the list of all object paths) and `objectPath` (the object
currently being processed this iteration of the loop).
That leads to a failure to synthesize the interface removal
events, and spew in the log.
This commit corrects the objectPath/objectPaths confusion.
Previously mutter listened to Xsettings (via GTK) to get notified
whether the shell showed the app menu. After X11 support was changed in
the direction of being less central, listening to this particular
Xsettings were removed with the intention of having the Shell tell
mutter directly whether it was showing the menu or not.
This commit makes that happen. It still travels through Xsettings (still
via Gtk), as the shell still gets that state from Xsettings, but fixing
this is out of scope for this particular fix.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/276
Flag some actors that are good candidates for caching in texture memory
(what Clutter calls "offscreen redirect"), thereby mostly eliminating
their repaint overhead.
This isn't exactly groundbreaking, it's how you're meant to use
OpenGL in the first place. But the difficulty is in the design of
Clutter which has some peculiarities making universal caching
inefficient at the moment:
* Repainting an offscreen actor is measurably slower than repainting
the same actor if it was uncached. But only by less than 100%,
so if an actor can avoid changing every frame then caching is usually
more efficient over that timeframe.
* The cached painting from a container typically includes its children,
so you can't cache containers whose children are usually animating at
full frame rate. That results in a performance loss.
This could be remedied in future by Clutter explicitly separating a
container's background painting from its child painting and always
caching the background (as StWidget tries to in some cases already).
So this commit selects just a few areas where caching has been verified
to be beneficial, and many use cases now see their CPU usage halved:
One small window active...... 10% -> 7% (-30%)
...under a panel menu........ 23% -> 9% (-61%)
One maximized window active.. 12% -> 9% (-25%)
...under a panel menu........ 23% -> 11% (-52%)
...under a shell dialog...... 22% -> 12% (-45%)
...in activities overview.... 32% -> 17% (-47%)
(on an i7-7700)
Also a couple of bugs are fixed by this:
https://bugzilla.gnome.org/show_bug.cgi?id=792634https://bugzilla.gnome.org/show_bug.cgi?id=792633
Instead of consuming the event in front of the input method. Enter
is sometimes overriden by those, so it seems better to let the IM
handle the key event, and react later to it if it got propagated
anyway. That is what ::activate does, so use this signal.
This used to work before ClutterInputMethod/InputFocus because the
IM received the events directly from stage captured events. This
is not the case anymore.
Closes: #440
