Before any rendering is done by Cogl it needs to ensure the clip stack
is set up correctly by calling cogl_clip_ensure. This was not being
done for the Cogl vertex buffer so it would still use the clip from
the previous render.
Now that everything is float, the marsharlling function of the
size-change signal should reflect that fact.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
GLES doesn't support GL_QUADS. This patch makes it use GL_TRIANGLES
instead in that case. Unfortunately this means submitting two extra
vertices per quad. It could be better to use indexed elements once
CoglVertexBuffers gains support for that.
When ClutterGLXTexturePixmap uses GL_ARB_texture_rectangle,
it needs to pass the right internal format (GL_RGB or GL_RGBA)
when it initializes the texture with glTexImage2D() or later
handling won't recognize the alpha channel.
http://bugzilla.openedhand.com/show_bug.cgi?id=1586
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Since it is convenient to use geometry with an opacity of 0 for input only
purposes it's a worthwhile optimization to avoid submitting anything
for such actors while painting.
Backface culling is enabled as part of cogl_enable so the different
rendering functions in Cogl need to explicitly opt-in to have backface
culling enabled. Cogl vertex buffers should allow backface culling so
they should check whether it is enabled and then set the appropriate
cogl_enable flag.
In order to cope with the situation where an application renders with
a PangoLayout, makes some changes and then renders again with the same
layout, CoglPangoRenderer needs to detect that the changes have
occured so that it can recreate the display list. This is acheived by
keeping a reference to the first line of the layout. When the layout
is changed Pango will clear the layout pointer in the first line and
create a new line. So if the layout pointer in the line becomes NULL
then we know the layout has changed. This trick was suggested by
Behdad Esfahbod in this email:
http://mail.gnome.org/archives/gtk-i18n-list/2009-May/msg00019.html
When a position is given to cogl_pango_render_layout_subpixel it
translates the GL matrix by the coordinates. However it was not
dividing by PANGO_SCALE so the coordinates were completely wrong.
Most of the operations involving the texture's allocated area require
floats -- either for computations or for setting the geometry into
COGL. So it doesn't make any sense to use get_allocation_coords() and
cast everything to floats.
Currently, COGL depends on defining debug symbols by manually
modifying the source code. When it's done, it will forcefully
print stuff to the console.
Since COGL has also a pretty, runtime selectable debugging API
we might as well switch everything to it.
In order for this to happen, configure needs a new:
--enable-cogl-debug
command line switch; this will enable COGL debugging, the
CoglHandle debugging and will also turn on the error checking
for each GL operation.
The default setting for the COGL debug defines is off, since
it slows down the GL operations; enabling it for a particular
debug build is trivial, though.
COGL has a debug message system like Clutter's own. In parallel,
it also uses a coupld of #defines. Spread around there are also
calls to printf() instead to the more correct g_log* wrappers.
This commit tries to unify and clean up the macros and the
debug message handling inside COGL to be more consistent.
ClutterTexture has many properties that can only be accessed using
the GObject API. This is fairly inefficient and makes binding the
class overly complicated.
The Texture class should have accessor methods for all its properties,
properly documented.
The code for the conversion of the GL error enumeration code
into a string is not following the code style and conventions
we follow in Clutter and COGL.
The GE() macro is also using fprintf(stderr) directly instead
of using g_warning() -- which is redirectable to an alternative
logging system using the g_log* API.
We use math routines inside Cogl, so it's correct to have it in
the LIBADD line. In normal usage something else was pulling in
-lm, but the introspection is relying on linking against the
convenience library.
Based on a patch by: Colin Walters <walters@verbum.org>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The timeline created when calling set_timeline(NULL) is referenced
even though we implicitly own it. When the Animation is destroyed,
the timeline is then leaked.
Thanks to: Richard Heatley <richard.heatley@starleaf.com>
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1548
Add a method for deleting the current selection inside a Text actor.
This is useful for subclasses.
See bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1521
Based on a patch by: Raymond Liu <raymond.liu@intel.com>
ClutterAnimation currently inherits the initial floating reference
semantics from GInitiallyUnowned. An Animation is, though, meant to
be used as a top-level object, like a Timeline or a Behaviour, and
not "owned" by another object. For this reason, the initial floating
reference does not make any sense.
Document that repeated calls to clutter_cairo_texture_create()
continue drawing on the same cairo_surface_t. Add
clutter_cairo_texture_clear() for when you don't want that behavior.
http://bugzilla.openedhand.com/show_bug.cgi?id=1599
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The cursor x position is already translated, so we do not need to take the
actors allocation into account when calculating scrolling.
Additionally, we need to update the text_x value before running
clutter_text_ensure_cursor_position.
Add any scrolling offset to the x value when in single line mode.
Now that the offset is taken into account in the position_to_coords
function, we do not need to adjust the cursor x manually in
clutter_text_paint.
If the cursor is already at the end of the Text contents then we
need to maintain its position when deleting the previous character
using the relative key binding.
The required "fake" libclutter-cogl.la upon with the main clutter
shared object depends is only built with introspection enabled
instead of being built unconditionally.
Passing:
--library=clutter-@CLUTTER_FLAVOUR@-@CLUTTER_API_VERSION@
to g-ir-scanner, when building Cogl was causing g-ir-scanner to
link the introspection program against the installed clutter library,
if it existed or fail otherwise. Instead copy the handling from
the json/ directory where we link against the convenience library
to scan, and do the generation of the typelib later in the
main clutter/directory.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1594
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If text is set, ClutterText should never return less than the layout
height for minimum and preferred heights.
This holds unless ellipsize and wrap are enabled, in which case the
minimum height should be the height of the first line -- which is
the height needed to at the very least show the ellipsization.
Based on a patch by: Thomas Wood <thomas@openedhand.com>
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1598
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This is the another step into abstracting the backend operations
that are currently spread all across the board back into the
backend implementations where they belong.
The GL context creation, for instance, is demanded to the stage
realization which makes it a critical path for every operation
that is GL-context bound. This usually does not make any difference
since we realize the default stage, but at some point we might
start looking into avoiding the default stage realization in order
to make the Clutter startup faster.
It also makes the code maintainable because every part is self
contained and can be reworked with the minimum amount of pain.
The master clock is using the redraw priority to create the source
that will be used to spin the paint sequence if something is being
animated using a timeline.
Unfortunately, the priority is too high and this causes starvation
when embedding into other toolkits -- like gtk+.
Thanks to Havoc Pennington for catching this.
The XVisualInfo for GL is created when a stage is being realized.
When embedding Clutter inside another toolkit we might not want to
realize a stage to extract the XVisualInfo, then set the stage
window using a foreign X Window -- which will cause a re-realization.
Instead, we should abstract as much as possible into the X11 backend.
Unfortunately, the XVisualInfo for GL is requested using GLX API; for
this reason we have to create a ClutterBackendX11 method that we
override inside the ClutterBackendGLX implementation.
This also allows us to move a little bit of complexity from out of
the stage realization, which is currently a very delicate and hard
to debug section.
I was seeing clutter_text_get_selection trying to malloc up to 4Gb due to
unexpected negative arithmetic for the start/end offsets which resulted
in a crash.
This just tests for positions of -1 before deciding if the start/end
positions need to be swapped. The conversion from position to byte offset
already works with -1.
cogl_clip_push_window_rect is implemented using GPU scissoring which allows
the GPU to cull anything that falls outside a given rectangle. Since in the
case of picking we only ever care about a single pixel we can get the GPU to
ignore all geometry that doesn't intersect that pixel and only rasterize for
one pixel.
Previously clipping could only be specified in object coordinates, now
rectangles can also be pushed in window coordinates.
Internally rectangles pushed this way are intersected and then clipped using
scissoring. We also transparently try to convert rectangles pushed in
object coordinates into window coordinates as we anticipate the scissoring
path will be faster then the clip planes and undoubtably it will be faster
than using the stencil buffer.
The stencil buffer is always cleared the first time a clip is used
that needs it and the stencil test is disabled otherwise so there is
no need to clear before a paint.
COGLenum, COGLint and COGLuint which were simply typedefs for GL{enum,int,uint}
have been removed from the API and replaced with specialised enum typedefs, int
and unsigned int. These were causing problems for generating bindings and also
considered poor style.
The cogl texture filter defines CGL_NEAREST and CGL_LINEAR etc are now replaced
by a namespaced typedef 'CoglTextureFilter' so they should be replaced with
COGL_TEXTURE_FILTER_NEAREST and COGL_TEXTURE_FILTER_LINEAR etc.
The shader type defines CGL_VERTEX_SHADER and CGL_FRAGMENT_SHADER are handled by
a CoglShaderType typedef and should be replaced with COGL_SHADER_TYPE_VERTEX and
COGL_SHADER_TYPE_FRAGMENT.
cogl_shader_get_parameteriv has been replaced by cogl_shader_get_type and
cogl_shader_is_compiled. More getters can be added later if desired.
Calling glReadPixels is bad enough in forcing us to synchronize the CPU with
the GPU, but glFinish has even stronger synchonization semantics than
glReadPixels which may negate some driver optimizations possible in
glReadPixels.
Commit 43fa38fcf5 broke out-of-tree builds by removing some of the
builddir directories from the include path. builddir/clutter/cogl and
builddir/clutter are needed because cogl.h and cogl-defines-gl.h are
automatically generated by the configure script. The main clutter
headers are in the srcdir so this needs to be in the path too.
When the stage state changes between active/deactive, send out
key-focus-in/key-focus-out signal for the current key focused
actor on the stage.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1503
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Setting the stage window using the set_stage_foreign() method will
lead to a re-realization. We need to make sure that the Drawable
currently associated to the GL context is set to None, to avoid a
BadDrawable error or, if we're unlucky, a segfault in the X server.
This commit reverts part of commit 5bcde25c - specifically the
part that forced a realization of the stage if we are ensuring
the GL context with it. This makes Clutter behave like it did
prior to commit 5bcde25c: if we are asked to ensure the GL context
with an unrealized stage we simply pass NULL to the backend
implementation.
When showing a Stage for the first time we end up realizing the stage
implementation before realizing the wrapper. This leads to segmentation
faults or errors coming from the backend because we're fumbling the
state and realization sequence.
Since we are destroying any previously set VisualInfo we keep we know
for sure that stage->xvisinfo is going to be None; hence, no reason to
check this condition.
The verify_map_state() internal method is conditionally compiled
if we have CLUTTER_ENABLE_DEBUG set; for this reason, all calls to
that method should be made conditional.
When building Clutter with introspection enabled everything stops
at Cogl GIR generation because it depends on the installed library
to work. Since we still require some changes in the API to be able
to build the GIR and the typelib for Cogl we should disable the
generation of the GIR as well.
The fix for bug 1138 broke multi-stage support on GLX, causing
X11 to segfault with the following stack trace:
Backtrace:
0: /usr/X11R6/bin/X(xf86SigHandler+0x7e) [0x80c91fe]
1: [0xb7eea400]
2: /usr/lib/xorg/modules/extensions//libglx.so [0xb7ae880c]
3: /usr/lib/xorg/modules/extensions//libglx.so [0xb7aec0d6]
4: /usr/X11R6/bin/X [0x8154c24]
5: /usr/X11R6/bin/X(Dispatch+0x314) [0x808de54]
6: /usr/X11R6/bin/X(main+0x4b5) [0x8074795]
7: /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7c75775]
8: /usr/X11R6/bin/X(FontFileCompleteXLFD+0x21d) [0x8073a81]
which I can only track down to clutter_backend_glx_ensure_current()
being passed a NULL stage -- something that happens when a stage
is not correct realized. That should lead to a glXMakeCurrent(None)
and not to a segmentation fault, though.
When destroying a top-level actor we can actually relax the verification
of the map state, since it might be fully asynchronous and we might not
re-enter inside the mainloop in time to receive the unmap notification.
If the filter means that the there should be no rows left in the model,
clutter_model_get_iter_at_row (model, 0) should return NULL.
Howevever the currene implementation misbehaves and returns a bad iterator.
This change resolves the issue by tracking if we actually found any
non-filtered rows in our pass through the sequence.
OH Bugzilla: 1591
The stage is chaining up to the ClutterGroup::paint instead of
the ClutterGroup::pick method. This works anyway because we
detect the stage by default, but it's not a reliable solution
in case we decide to change the picking further on.
The master clock is currently advanced using a frame source driven
by the default frame rate. This breaks the sync to vblank because
the vblanking rate could be different than 60 Hz -- or it might be
completely disabled (e.g. with CLUTTER_VBLANK=none).
We should be using the main loop to check if we have timelines
playing, and if so queue a redraw on the stages we own.
We should also prepare the subsequent frame at the end of the redraw
process, so if there are new redraw we will have the scene already
in place.
This makes Clutter redraw at the maximum frame rate, which is
limited by the vblanking frequency.
Currently, picking in ClutterGroup pollutes the CLUTTER_DEBUG=paint
logs since it just calls the paint function. Reimplementing the pick
doesn't make us lose anything -- it might even be slightly faster
since we don't have to do a (typed) cast and a class dereference.
The timeline created when calling set_timeline(NULL) is referenced
even though we implicitly own it. When the Animation is destroyed,
the timeline is then leaked.
Thanks to: Richard Heatley <richard.heatley@starleaf.com>
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1548
Currently, the conversion from em to units is done by using the
default font name inside the backend. For actors using their own
font/text layout we need a way to specify the font name along
with the quantity we wish to transform.
Commit 515350a7 renamed ::focus-in and ::focus-out to ::key-focus-in
and ::key-focus-out respectively. One signal emission for ::focus-out
escaped the renaming in ClutterStage.
Currently, the default screen guard value is 0, which is a valid
screen number on X11, and it might not be the default.
Patch suggested by: Owen W. Taylor <otaylor@redhat.com>
Currently, the introspection data for Cogl is built right into
Clutter's own typelib. This makes functions like:
cogl_path_round_rectangle()
Appear as:
Clutter.cogl_path_round_rectangle()
It should be possible, instead, to have a Cogl namespace and:
Cogl.path_round_rectangle()
This means building introspection data for Cogl alone. Unfortunately,
there are three types defined in Cogl that confuse the introspection
scanner, and make it impossible to build a typelib:
COGLint
COGLuint
COGLenum
These three types should go away before 1.0, substituted by int,
unsigned int and proper enumeration types. For this reason, we can
just set up the GIR build and wait until the last moment to create
the typelib. Once that has been done, we will be able to safely
remove the Cogl API from the Clutter GIR and typelib and let
people import Cogl if they want to use the Cogl API via introspection.
For consistency, and since those signals are key-related, the
::focus-in signal is not ::key-focus-in and the ::focus-out
signal is now ::key-focus-out.
Add a method for deleting the current selection inside a Text actor.
This is useful for subclasses.
See bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1521
Based on a patch by: Raymond Liu <raymond.liu@intel.com>
ClutterAnimation currently inherits the initial floating reference
semantics from GInitiallyUnowned. An Animation is, though, meant to
be used as a top-level object, like a Timeline or a Behaviour, and
not "owned" by another object. For this reason, the initial floating
reference does not make any sense.
With the recent change to internal floating point values, ClutterUnit
has become a redundant type, defined to be a float. All integer entry
points are being internally converted to floating point values to be
passed to the GL pipeline with the least amount of conversion.
ClutterUnit is thus exposed as just a "pixel with fractionary bits",
and not -- as users might think -- as generic, resolution and device
independent units. not that it was the case, but a definitive amount
of people was convinced it did provide this "feature", and was flummoxed
about the mere existence of this type.
So, having ClutterUnit exposed in the public API doubles the entry
points and has the following disadvantages:
- we have to maintain twice the amount of entry points in ClutterActor
- we still do an integer-to-float implicit conversion
- we introduce a weird impedance between pixels and "pixels with
fractionary bits"
- language bindings will have to choose what to bind, and resort
to manually overriding the API
+ *except* for language bindings based on GObject-Introspection, as
they cannot do manual overrides, thus will replicate the entire
set of entry points
For these reason, we should coalesces every Actor entry point for
pixels and for ClutterUnit into a single entry point taking a float,
like:
void clutter_actor_set_x (ClutterActor *self,
gfloat x);
void clutter_actor_get_size (ClutterActor *self,
gfloat *width,
gfloat *height);
gfloat clutter_actor_get_height (ClutterActor *self);
etc.
The issues I have identified are:
- we'll have a two cases of compiler warnings:
- printf() format of the return values from %d to %f
- clutter_actor_get_size() taking floats instead of unsigned ints
- we'll have a problem with varargs when passing an integer instead
of a floating point value, except on 64bit platforms where the
size of a float is the same as the size of an int
To be clear: the *intent* of the API should not change -- we still use
pixels everywhere -- but:
- we remove ambiguity in the API with regard to pixels and units
- we remove entry points we get to maintain for the whole 1.0
version of the API
- we make things simpler to bind for both manual language bindings
and automatic (gobject-introspection based) ones
- we have the simplest API possible while still exposing the
capabilities of the underlying GL implementation
When calling clutter_model_iter_next () / clutter_model_iter_prev () we need
to update the row for the iterator. In order to improve the peformance of
iterating this change adds a private row mutator and switches ClutterListModel
to use it.
In order to carry out various comparisons for e.g. identifying the first
iterator in the model we need a ClutterModelIter. This change switches from
creating a new iterator each time to reusing an existing iterator.
The flags field of ClutterActor should have accessor methods for,
language bindings.
Also, the set_flags() and unset_flags() methods should actively
emit notifications for the changed properties.
This is simply a wrapper around cogl_color_set_from_4f and
cogl_material_set_color. We already had a prototype for this, it was
an oversight that it wasn't already implemented.
There were several functions I believe no one is currently using that were
only implemented in the GL backend (cogl_offscreen_blit_region and
cogl_offscreen_blit) that have simply been removed so we have a chance to
think about design later with a real use case.
There was one nonsense function (cogl_offscreen_new_multisample) that
sounded exciting but in all cases it just returned COGL_INVALID_HANDLE
(though at least for GL it checked for multisampling support first!?)
it has also been removed.
The MASK draw buffer type has been removed. If we want to expose color
masking later then I think it at least would be nicer to have the mask be a
property that can be set on any draw buffer.
The cogl_draw_buffer and cogl_{push,pop}_draw_buffer function prototypes
have been moved up into cogl.h since they are for managing global Cogl state
and not for modifying or creating the actual offscreen buffers.
This also documents the API so for example desiphering the semantics of
cogl_offscreen_new_to_texture() should be a bit easier now.
These are necessary if nesting redirections to an fbo,
otherwise there's no way to know how to restore
previous state.
glPushAttrib(GL_COLOR_BUFFER_BIT) would save draw buffer
state, but also saves a lot of other stuff, and
cogl_draw_buffer() relies on knowing about all draw
buffer state changes. So we have to implement a
draw buffer stack ourselves.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
It is valid in some situations to have a material layer with an invalid texture
handle (e.g. if you setup a texture combine mode before setting the texture)
and so _cogl_material_layer_free needs to check for a valid handle before
attempting to unref it.
Adds missing notices, and ensures all the notices are consistent. The Cogl
blurb also now reads:
* Cogl
*
* An object oriented GL/GLES Abstraction/Utility Layer
Redundant clearing of depth and stencil buffers every render can be very
expensive, so cogl now gives control over which auxiliary buffers are
cleared.
Note: For now clutter continues to clear the color, depth and stencil buffer
each paint.
The clutter frame source tries to average out the frame deltas so that
if one frame takes 1 interval plus a little bit of extra time then the
next frame will be 1 interval minus that little bit of extra
time. Therefore the deltas can sometimes be less than the frame
interval. ClutterTimeline should accumulate these small differences
otherwise it will end up missing out frames so the total duration of
the timeline will be a lot longer.
For example this was causing test-actors to appear to run very slow.
The method of ClutterTimeline that advances the timeline by a
delta (in millisecond) is going to be useful for testing the
timeline's behaviour -- and unbreak the timeline test suite that
was broken by the MasterClock merge.
With the introduction of the map/unmap flags and the split of the
visible state from the mapped state we require that every part of
a scene graph branch is mapped in order to be painted. This breaks
the ability of a ClutterClone to paint an hidden source actor.
In order to fix this we need to introduce an override flag, similar
in spirit to the current modelview and paint opacity overrides that
Clone is already using.
The override flag, when set, will force a temporary map on a
Clone source (and its children).
ClutterContainer provides a foreach_with_internals() vfunc for
iterating over all of a container's children, be them added using
the Container API or be them internal to the container itself.
We should be using the foreach_with_internals() function instead
of the plain foreach().
When replacing the fbo_handle with a new handle it first unrefs the
old handle. This was previously a call to cogl_offscreen_unref which
silently ignored attempts to unref COGL_INVALID_HANDLE. However the
new cogl_handle_unref does check for this so we should make sure the
handle is valid to avoid the warning.
Bug 1565 - test-fbo case failed in many platform
clutter_texture_new_from_actor was broken because it created the FBO
texture but then never attached it to the material so it was never
used for rendering. The old behaviour in Clutter 0.8 was to assign the
texture directly to priv->tex. In 0.9 priv->tex is replaced with
priv->material which has a reference to the tex in layer 0. So putting
the FBO texture directly in layer 0 more closely matches the original
behaviour.
When rendering a pango layout CoglPangoRenderer now records the
operations into a list called a CoglPangoDisplayList. The entries in
the list are either glyph renderings from a texture, rectangles or
trapezoids. Multiple consecutive glyph renderings from the same glyph
cache texture are combined into a single entry. Note the
CoglPangoDisplayList has nothing to do with a GL display list.
After the display list is built it is attached to the PangoLayout with
g_object_set_qdata so that next time the layout is rendered it can
bypass rebuilding it.
The glyph rendering entries are drawn via a VBO. The VBO is attached
to the display list so it can be used multiple times. This makes the
common case of rendering a PangoLayout contained in a single texture
subsequent times usually boil down to a single call to glDrawArrays
with an already uploaded VBO.
The VBOs are accessed via the cogl_vertex_buffer API so if VBOs are
not available in GL it will resort to a fallback.
Note this will fall apart if the pango layout is altered after the
first render. I can't find a way to detect when the layout is
altered. However this won't affect ClutterText because it creates a
new PangoLayout whenever any properties are changed.
Currently ClutterModel::get_iter_at_row() ignores whether we have
a filter in place. This also extends to the get_n_rows() method.
The more consistent, more intuitive and surely more correct way to
handle a Model with a filter in place is to take into account the
presence of the filter itself -- that is:
- get_n_rows() should take into account the filter and return the
number of *filtered* rows
- get_iter_at_row() should also take the filter into account and
get the first non-filtered row
These two changes make the ClutterModel with a filter function
behave like a subset of the original Model without a filter in
place.
For instance, given a model with three rows:
- [row 0] <does not match filter>
- [row 1] <matches filter>
- [row 2] <matches filter>
- [row 3] <does not match filter>
The get_n_rows() method will return "2", since only two rows will
match the filter; the get_first_iter() method will ask for the
zero-eth row, which will return an iterator pointing to the contents
of row 1 (but the :row property of the iterator will be set to 0);
the get_last_iter() method will ask for the last row, which will
return an iterator pointing to the contents of row 2 (but the :row
property of the iterator will be set to 1).
This changes will hopefully make the Model API more consistent
in its usage whether there is a filter in place or not.
Currently, there is no way for implementations of the ClutterModel
abstract class to know whether there is a filter in place. Since
subclasses might implement some optimization in case there is no
filter present, we need a simple (and public) API to ask the model
itself.
Setting the wrap mode on the PangoLayout seems to have disappeared
during the text-actor-layout-height branch merge so this brings it
back. The test for this in test-text-cache no longer needs to be
disabled.
We also shouldn't set the width on the layout if there is no wrapping
or ellipsizing because otherwise it implicitly enables wrapping. This
only matters if the actor gets allocated smaller than its natural
size.
Bug 1484 - Redraw ClutterClone when the source changes, even for
!visible sources
Connect to ::queue-redraw on the clone source and queue a redraw.
This allows redrawing the Clone when the source changes, even in
case of a non visible source actor.
http://bugzilla.openedhand.com/show_bug.cgi?id=1484
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Currently, all timelines install a timeout inside the TimeoutPool
they share. Every time the main loop spins, all the timeouts are
updated. This, in turn, will usually lead to redraws being queued
on the stages.
This behaviour leads to the potential starvation of timelines and
to excessive redraws.
One lesson learned from the games developers is that the scenegraph
should be prepared in its entirety before the GL paint sequence is
initiated. This means making sure that every ::new-frame signal
handler is called before clutter_redraw() is invoked.
In order to do so a TimeoutPool is not enough: we need a master
clock. The clock will be responsible for advancing all the active
timelines created inside a scene, but only when the stage is
being redrawn.
The sequence is:
+ queue_redraw() is invoked on an actor and bubbles up
to the stage
+ if no redraw() has already been scheduled, install an
idle handler with a known priority
+ inside the idle handler:
- advance the master clock, which will in turn advance
every playing timeline by the amount of milliseconds
elapsed since the last redraw; this will make every
playing timeline emit the ::new-frame signal
- queue a relayout
- call the redraw() method of the backend
This way we trade multiple timeouts with a single frame source
that only runs if a timeline is playing and queues redraws on
the various stages.
Bug 1547 - when an actor is unmapped while owning the focus, it should
release it
When an actor is unmapped while owning the focus, the should release it.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1138 - No trackable "mapped" state
* Add a VISIBLE flag tracking application programmer's
expected showing-state for the actor, allowing us to
always ensure we keep what the app wants while tracking
internal implementation state separately.
* Make MAPPED reflect whether the actor will be painted;
add notification on a ClutterActor::mapped property.
Keep MAPPED state updated as the actor is shown,
ancestors are shown, actor is reparented, etc.
* Require a stage and realized parents to realize; this means
at realization time the correct window system and GL resources
are known. But unparented actors can no longer be realized.
* Allow children to be unrealized even if parent is realized.
Otherwise in effect either all actors or no actors are realized,
i.e. it becomes a stage-global flag.
* Allow clutter_actor_realize() to "fail" if not inside a toplevel
* Rework clutter_actor_unrealize() so internally we have
a flavor that does not mess with visibility flag
* Add _clutter_actor_rerealize() to encapsulate a somewhat
tricky operation we were doing in a couple of places
* Do not realize/unrealize children in ClutterGroup,
ClutterActor already does it
* Do not realize impl by hand in clutter_stage_show(),
since showing impl already does that
* Do not unrealize in various dispose() methods, since
ClutterActor dispose implementation already does it
and chaining up is mandatory
* ClutterTexture uses COGL while unrealizable (before it's
added to a stage). Previously this breakage was affecting
ClutterActor because we had to allow realize outside
a stage. Move the breakage to ClutterTexture, by making
ClutterTexture just use COGL while not realized.
* Unrealize before we set parent to NULL in clutter_actor_unparent().
This means unrealize() implementations can get to the stage.
Because actors need the stage in order to detach from stage.
* Update clutter-actor-invariants.txt to reflect latest changes
* Remove explicit hide/unrealize from ClutterActor::dispose since
unparent already forces those
Instead just assert that unparent() occurred and did the right thing.
* Check whether parent implements unrealize before chaining up
Needed because ClutterGroup no longer has to implement unrealize.
* Perform unrealize in the default handler for the signal.
This allows non-containers that have children to work properly,
and allows containers to override how it's done.
* Add map/unmap virtual methods and set MAPPED flag on self and
children in there. This allows subclasses to hook map/unmap.
These are not signals, because notify::mapped is better for
anything it's legitimate for a non-subclass to do.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1228 - Unnecessary glColorMask on alpha drops performance
With DRI2, alpha is allowed in the window's framebuffer
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1513 - Allow passing in ClutterPickMode to
clutter_stage_get_actor_at_pos()
At the moment, clutter_stage_get_actor_at_pos() uses CLUTTER_PICK_ALL
internally to find an actor. It would be useful to allow passing in
ClutterPickMode to clutter_stage_get_actor_at_pos(), so that the caller
can specify CLUTTER_PICK_REACTIVE as a criteria.
Bug 1516 - Does not withdraw toplevels correctly
clutter_stage_x11_hide() needs to use XWithdrawWindow(), not
XUnmapWindow().
As it stands now, if the window is already unmapped (say the WM has
minimized it), then the WM will not know that Clutter has closed the
window and will keep the window managed, showing it in the task list
and so forth.
Bug 1517 - clutter_container_foreach_with_internals()
This allows us to iterate over all children (for things like maintaining
map/realize invariants) or only children that apps added and care about.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1561 - Bad code in clutter-alpha.c
The implementation of the easing modes equations followed closely
the JavaScript and ActionScript counterparts. Obviously, JS and AS
are not C-compatible, so later versions of gcc (4.4.0 for instance)
would complain about uninitialized variables and such. The code is
also obfuscated and hard to debug/understand.
For these reasons, the implementation should be unobfuscated and
sanitized.
A lockup was reported by fargoilas on #clutter and removing the server grab in
clutter_x11_texture_pixmap_sync_window fixed the problem.
We were doing an x server grab to guarantee that if the XGetWindowAttributes
request reported that our redirected window was viewable then we would also
be able to get a valid pixmap name. (the composite protocol says it's an
error to request a name for a window if it's not viewable) Without the grab
there would be a race condition.
Instead we now handle error conditions gracefully.
The documentation for the ::cursor-event says that the signal
is emitted only when the cursor position changes. Right now it
is being emitted every time we ensure the cursor position during
the Text paint sequence.
The clutter_text_ensure_cursor_position() function should check
whether the stored cursor position has changed since the last
paint, and emit the ::cursor-event signal only when there has
been a change.
We only want to eschew the pango_layout_set_width() on editable,
single-line Text actors because they can "scroll" the PangoLayout.
This fixes the ellipsization on entries.
In unifying the {gl,gles}/cogl.c code recently, moving most of the code into
common/cogl.c the gmodule.h include was also mistakenly moved.
Thanks to Felix Rabe for reporting this issue.
Note: I haven't tested this fix myself, as I'm not set up to be able to
build for OS X
Buffer objects aren't currently available for glx indirect contexts, so we
now have a fallback that simply allocates fake client side vbos to store the
attributes.
This makes the #if 0'd debug code that was in _cogl_journal_flush_quad_batch
- which we have repeatedly found usefull for debugging various geometry
issues in Clutter apps - a runtime debug option.
The outline colors rotate in order from red to green to blue which can also
help confirm the order that your geometry really drawn.
The outlines are not affected by the current material state, so if you e.g.
have a blending bug where geometry mysteriously disappears this can confirm
if the underlying rectangles are actually being emitted but blending is
causing them to be invisible.
Editable ClutterText will scroll when allocated less width than is
necessary to lay out the entire layout on a single line, so return 1 for
the minimum width in this case.
Approved by Emmanuele Bassi, fixes bug #1555.
Since we have to do (z_far - z_near) and use it in a division we
should check that the user is not passing a value that would
cause a division by zero.
If we need to check that the layout sequence is correct in
terms of order of execution and with respect to caching, then
having a CLUTTER_DEBUG_LAYOUT debug flag would make things
easier.
Ellipsizing was effectively broken for two reasons. There was a typo
in the code to set the width so it always ended up being some massive
value. If no height should be set on the layout it was being set to
G_MAXINT. Setting a height greater than 0 enables wrapping which so
ellipsizing is not performed. It should be left at the default of -1
instead.
Bug 1476 - JSON Parser memory leak
Static analysis of the code showed that the in-tree copy of
the JsonParser object leaks objects and arrays on parse errors.
Thanks to Gordon Williams <gordon.williams@collabora.co.uk>
If the stage is unrealized (such as will be the case if the stage was
created with clutter_stage_new) then it would set the size of the
stage display but it was not setting the fullscreen_on_map flag so it
never got the _NET_WM_STATE_FULLSCREEN property. Now it always sets
the flag regardless of whether the window is created yet.
There was also problems with dual-headed displays because in that case
DisplayWidth/Height will return the size of the combined display but
Metacity (and presumably other WMs) will sensibly try fit the window
to only one of the monitors. However we were setting the size hints so
that the minimum size is that of the combined display. Metacity tries
to honour this by setting the minimum size but then it no longer
positions the window at the top left of the screen.
The patch makes it avoid setting the minimum size when the stage is
fullscreen by checking the fullscreen_on_map flag. This also means we
can remove the static was_resizable flag which would presumably have
caused problems for multi-stage.
Adds a new property so that the selection color can be different from
the cursor color. If no selection color is specified it will use the
cursor color as before. If no cursor color is specified either it will
use the text color.
The debug macros for tracking reference counting of CoglHandles had
some typos introduced in c3d9f0 which meant it failed to compile when
COGL_DEBUG is 1.
Since the Cogl material branch merge when changing the color of a part
using pango attributes (such as using <span color="red" /> markup)
then it wouldn't return to the default color for the rest of the
layout. pango_renderer_get_color returns NULL if there is no color
override in which case it needs to revert to the color specified as
the argument to cogl_pango_render_layout. The 'color' member of
CoglPangoRenderer has been reinstated to store that default color and
now cogl_pango_render_set_color_for_part is the only place that sets
the material color.
The clutter_actor_animate*() family of functions should only connect
to the Animation::completed signal once, during the construction of
the Animation object attached to the Actor. Otherwise, the completed
signal handler will be run multiple times, and will try to unref()
the Animation for each call -- leading to a segmentation fault.
The Animation class is missing a ::started signal matching the
::completed one. A ::started signal is useful for debugging,
initial state set up, and checks.
Bug 1535 - Complete animation always unrefs ClutterAnimation (even
after g_object_ref_sink)
Animations created through clutter_animation_new() should not
automagically unref themselves by default on ::complete. We
only want that behaviour for Animations created by the
clutter_actor_animate* family of functions, since those provide
the automagic memory management.
ClutterGroup still ships with API deprecated since 0.4. We did
promise to keep it around for a minor release cycle -- not for 3.
Since we plan on shipping 1.0 without the extra baggage of the
deprecated entry points, here's the chance to remove the accumulated
cruft.
All the removed methods and signals have a ClutterContainer
counterpart.
Since we're planning to release 1.0 without any of the deprecated
API baggage, we can simply remove the set_uniform_1f() method from
ClutterShader public API and add it to the deprecated header.
The cogl_is_* functions were showing up quite high on profiles due to
iterating through arrays of cogl handles.
This does away with all the handle arrays and implements a simple struct
inheritance scheme. All cogl objects now add a CoglHandleObject _parent;
member to their main structures. The base object includes 2 members a.t.m; a
ref_count, and a klass pointer. The klass in turn gives you a type and
virtual function for freeing objects of that type.
Each handle type has a _cogl_##handle_type##_get_type () function
automatically defined which returns a GQuark of the handle type, so now
implementing the cogl_is_* funcs is just a case of comparing with
obj->klass->type.
Another outcome of the re-work is that cogl_handle_{ref,unref} are also much
more efficient, and no longer need extending for each handle type added to
cogl. The cogl_##handle_type##_{ref,unref} functions are now deprecated and
are no longer used internally to Clutter or Cogl. Potentially we can remove
them completely before 1.0.
A layer object may be instantiated when setting a combine mode, but before a
texture is associated. (e.g. this is done by the pango renderer) if this is the
case we shouldn't call cogl_texture_get_format() with an invalid cogl handle.
This patch skips over layers without a texture handle when determining if any
textures have an alpha channel.
Bug 1518 - [Patch] Widget derivied from ClutterText will crash on
key_press_event
In clutter_text_key_press() we are using G_OBJECT_TYPE_NAME to find
out the actor's type name. However, if some widget is derived from
ClutterText, when the key press handler is called, G_OBJECT_TYPE_NAME
will return the name of the derived widget.
The default implementation should get the binding pool for the base
class.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
ClutterText should offer multiple selection modes depending on the
number of pointer clicks.
Following the GTK+ conventions:
- double click selects the current word
- triple click selects the current line
Added support for registering a handler for the completed signal
directly amongst the varargs making it easier to attach code
to be executed when animations complete.
Bug 1529 - Selection bound out of sync with an empty Text actor
When the user clicks on a Text actor the cursor position and the
selection bound are set using bytes_to_offset(); if the Text is
empty, this means placing them both to 0. Setting the selection
bound to 0 means that when the user inserts a character by typing
it into the Text, the selection will be [0,1]; this will select
the first character, which will then be overwritten when typing
a new character.
The Text actor should, instead, check if there are no contents
and set the cursor position and the selection bound to -1.
The clutter_text_set_selection_bound() method should also validate
the value passed, in case it's bigger than the text lenght, or
smaller than -1.
The symbol name for cogl_vertex_buffer_draw_elements was wrong so it
ended up with no documentation. The name for the vertex attribute was
incorrect in cogl_vertex_buffer_add.
None of this code directly related to implementing CoglTextures, and the
code was needlessly duplicated between the GL and GLES backends. This moves
the cogl_rectangle* and cogl_polygon* code into common/cogl-primitives.c
makes which makes lot of sense since the two copies keep needlessly
diverging introducing or fixing bugs in one but not the other. For instance
I came accross one such bug regarding the enabling of texture units when
unifying the code.
The gtk-doc had a copy and paste error, saying the float array should be 8
elements per rectangle instead of 4. There was also no newline in the gles
code before the new function.
It's often nice to be able to draw a batch of vertices, even if these
have no texture coordinates. This add a cogl_rectangles, similar to
cogl_rectangles_with_texture_coords, only without.
There's no need to enable the texture target unless it is going to be
used for rendering. Enabling it directly with glEnable calls confuses
Cogl's state caching.
This is a replacement for the patch in bug 1483 which was reverted.
This reverts commit f9d996a460.
The change from calling glBindTexture to using the material API with
cogl_material_flush_gl_state does not always work because it doesn't
necessarily leave the active texture unit as GL_TEXTURE0. For example,
if the previously rendered texture was multi-layered then the last
thing cogl_material_flush_gl_state will do is select GL_TEXTURE1 just
to disable it.
Clutter was complaining about netural width smaller than minimum widths
(differences around 0.0005) by using an epsilon value of 1e-4 for these
floating point comparisons, these warnings have now been silenced.
Using test-cogl-vertex-buffer as a test case which is CPU bound due to
hls -> rgb conversions this alternative algorithm looked to be ~10%
faster when tested on an X61s Lenovo.
Queuing an animation on an actor cannot be done from within the
::completed signal handler, because we guarantee that the Animation
instance is valid and attached to the actor it animates for the
whole duration of the signal emission chain.
In order to queue animations you have to install an idle handler
on the main loop, and call clutter_actor_animate() inside it.
The documentation should be more clear about this caveat in the
memory management of ClutterAnimations created by the animate()
family of functions.
There are various constraints for when we can support multi-texturing and
when they can't be met we try and print a clear warning explaining why the
operation isn't supported, but we shouldn't endlessly repeat the warning for
every primitive of every frame. This patch fixes that.
This function was renamed a while ago in the .c file from
cogl_vertex_buffer_draw_range_elements but the corresponding .h and
doc/reference/cogl changes weren't made.
For convenience it is now valid to avoid a seperate call to
cogl_vertex_buffer_submit() and assume that the _draw() calls will do this
for you (though of course if you do this you still need to ensure the
attribute pointers remain valid until your draw call.)
Bug 1495 - Timelines run 4% short
Previously the timelines were timed by calculating the interval
between each frame stored as an integer number of milliseconds so some
precision is lost. For example, requesting 60 frames per second gets
converted to 16 ms per frame which is actually 62.5 frames per
second. This makes the timeline shorter by 4%.
This patch merges the common code for timing from the timeout pools
and frame sources into an internal clutter-timeout-interval file. This
stores the interval directly as the FPS and counts the number of
frames that have been reached instead of the elapsed time.
The Animation API should follow this pattern:
- functions with an Interval as part of the arguments should have
"interval" inside their name, e.g.:
clutter_animation_bind_interval
clutter_animation_update_interval
- functions dealing with property names should have "property"
inside their name, e.g.:
clutter_animation_has_property
clutter_animation_unbind_property
- unless -
- functions dealing with a property and its value should not
have any modifier, e.g.:
clutter_animation_bind
The change from update_property() to update_interval() frees up
clutter_animation_update(), to be added at a later date.
Bug 1454 - move queue_redraw virtualization to ClutterActor
The ClutterActor::queue-redraw signal allows parent containers to
track whether their children need a redraw.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
A common use of setting clip is to keep an actor inside its allocation;
right now to do this you have to set up a callback on notify::allocation.
There's no overhead added by sticking another bit in ClutterActor
clip-to-allocation that will clip painting to the allocation if set.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1419 - Add clutter_animation_bind, rename clutter_animation_bind_interval
This is a different approach from the clutter_actor_animatev
vector variant. The single call should be even easier on
automatic bindings, since calls can be chained like:
new Clutter.Animation({object: myactor}).bind("x", 42).bind("y", 43);
Note clutter_animation_bind_property which took a ClutterInterval
is renamed to clutter_animation_bind_interval for clarity, and to
discourage use since there are friendlier APIs about.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we are animating an actor using the clutter_actor_animate*() family
of functions we might want to expose a getter for the Animation instance
we are using, to avoid excessing bookkeeping.
The ::completed signal requires an emitter in case we want to stop
the animation and safely dispose it inside application code without
breaking invariants.
The memory management of the ClutterAnimation instances should be
heavily documented, given its "automagical" nature, so that other
people might understand it and avoid breaking it in the future.
It's reasonably normal for a relayout of the stage to cause the stage
to be queued for drawing; for this reason we should do the relayout before
we clear stage->update_idle. (But want to clear update_idle() before actually
doing the redraw to handle the corner case where the draw queues another
redraw.)
Bug 1499 - clutter_actor_notify_if_geometry_changed causes sync
layout cycles
Whenever clutter_actor_set_{width,height,x,y,size...} is used, extra
synchronous size requests are triggered in
clutter_actor_notify_if_geometry_changed.
If the get_preferred_width() and get_preferred_height() implementations
are particularly costly (e.g. ClutterText) this will result in a performance
impact.
To avoid excessive allocation or requisition cycles we use the
cached values and flags. If we don't have an allocation, we assume
that we need to notify all the properties; if we don't have a size
requisition we notify only width and height; finally, if we do have
a valid allocation we notify only on the changed values.
_cogl_add_path_to_stencil_buffer and _cogl_add_stencil_clip were leaving
the projection matrix current when calling cogl_rectangle which was
upsetting _cogl_current_matrix_state_flush.
Adds glFrustum wrappers (GLES only accepts floats not doubles, and GLES2
needs to use our internal cogl_wrap_glFrustumf)
Adds GL_TEXTURE_MATRIX getter code in cogl_wrap_glGetFloatv
Adds a GL_TEXTURE_MATRIX define for GLES2
Its not intended that users should use these with any other matrix mode, and
internally we now have the _cogl_current_matrix API if we need to play with
other modes.
If we later add internal flags to CoglMatrix then this code wouldn't
initialize those flags. The ways it's now done adds a redundant copy, but
if that turns out to be something worth optimizing we can look again at
using a cast but adding another way for initializing internal flags.
This is useful because sometimes we need to get the current matrix, which
is too expensive when indirect rendering.
In addition, this virtualization makes it easier to clean up the API in
the future.
Only have load-data-async and load-async properties, both are construct
only and the latter adds the former load-size-async behavior on top of
load-data-async.
This commit yesterday:
89e3e3a4cc
[animation] Add vector variants for ::animate()
broke the "fixed::" attribute on properties in clutter_actor_animate(),
because the fixed:: part is still on the string when it checks to see if
it's a valid property the class knows about.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
As a convenience, if NULL is passed for the text argument of
clutter_text_set_text() (and for consistency,
clutter_text_set_markup()), treat that the same as "".
Bug 1480 - Clutter groups don't output their name when
CLUTTER_DEBUG=paint
This is a really useful thing to do debugging-wise - as you can see
istantly when (and if) clutter objects are being drawn - as often
there's quite a hierarchy of objects in groups.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Add missing (out) annotations to the doc comments for ClutterActor methods
with multiple return values.
Fix the definition of clutter_actor_get_allocation_vertices() to be
consistent with the declaration and have verts[4] rather than verts[].x
http://bugzilla.openedhand.com/show_bug.cgi?id=1481
Bug 1501 - clutter_text_insert_text not working right with non-onebyte
character
In clutter_text_insert_text(), the position is expressed in characters, not
in bytes.
Actually, it turns out to be working on bytes, so when there are already
multi-byte character in the text buffer, insert text at the position after
the multi-byte character will not work right.
Also, the position is not updated after the insert work is done.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1500 - [Patch] clutter_text crash with non one-byte utf8 text exceed
max_length
In clutter_text_set_text_internal(), when text length in character is greater
than max_length, and there are multi-byte character in it, then the new text
string buffer is not malloc()'ed with right length. This will cause the app to
crash with segmention fault.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The fixed-point values are converted to integers, which obviously
messes up the conversion. Instead, they should be converted to
floating point values before normalizing to bytes for the assignment
to ClutterColor components.
$(builddir) isn't always defined in earlier versions of Automake
(although I can't track down exactly which version it appeared
in). According to the autoconf docs it is "rigorously equal to `.'" so
we might as well not use it.
The private CoglContext is created using g_malloc() and not
zeroed; this means we have to initialize the values we are
going to check, to avoid hitting garbage.
Thanks to Tommi Komulainen.
Commit a383929 added the $(srcdir) prefix to all of the source files
but some files are generated by the configure script and other make
rules so they actually live in $(builddir). Out-of-tree builds
therefore broke.
Bug 1438 - Implicit Animation API could use animatev variants
The clutter_actor_animate* family of functions use va_lists to
handle the property/value pairs for the final state of the
animation.
Language bindings have problems with variadic arguments functions,
and usually prefer vector-based API which allow a greater level
of control and conversion from native data types.
For each variadic arguments function in the clutter_actor_animate*
family there should be a vector-based version that takes:
- the number of property/value pairs
- a constant array of constant strings
- an array of GValues
Most of the internal implementation can be refactored from the
current one, thus both the var_args and the vector entry points
share a common implementation of the code; then, both versions
of the API are just loops over a list of arguments.
Based on a patch by: Robert Carr <carrr@rpi.edu>
Since the switch from fixed point to floating point, and the introduction
of CoglFixed, ClutterFixed has been typedef'd into a float. This makes
ClutterFixed the worst fixed point API ever.
Now that Clutter has been migrated to CoglFixed and gfloat whenever needed,
ClutterFixed can be safely removed.
The only thing that Clutter should still provide is ClutterParamSpecFixed,
for installing fixed point properties into GObject classes.
The ClutterFixed symbols have been entirely removed from the API.
A GValue containing a ClutterUnit should be transformable into a
GValue holding an integer, a floating point value or a fixed point
value.
This means adding more transformation functions when registering
the ClutterUnit GType.
The fog and perspective API is currently split in two parts:
- the floating point version, using values
- the fixed point version, using structures
The relative properties are using the structure types, since they
are meant to set multiple values at the same time. Instead of
using bare values, the whole API should be coalesced into two
simple calls using structures to match the GObject properties.
Thus:
clutter_stage_set_fog (ClutterStage*, const ClutterFog*)
clutter_stage_get_fog (ClutterStage*, ClutterFog*)
clutter_stage_set_perspective (ClutterStage*, const ClutterPerspective*)
clutter_stage_get_perspective (ClutterStage*, ClutterPerspective*)
Which supercedes the fixed point and floating point variants.
More importantly, both ClutterFog and ClutterPerspective should
using floating point values, since that's what get passed to
COGL anyway.
ClutterFog should also drop the "density" member, since ClutterStage
only allows linear fog; non-linear fog distribution can be achieved
using a signal handler and calling cogl_set_fog() directly; this keeps
the API compact yet extensible.
Finally, there is no ClutterStage:fog so it should be added.
The type machinery for CoglFixed should be implemented by COGL
itself, now that COGL exports the GType of its types.
This allows moving most of what ClutterFixed did directly to
CoglFixed where it belongs.
ClutterFixed as a type is going away, superceded by CoglFixed. The
fixed point entry points in the API should be ported to the
CoglFixed type so that they are useful again.
Since the conversion of a floating point value to a fixed point
value is already done in double precision we can safely expose
a macro that converts a double precision floating point value to
a CoglFixed one.
Grabs are an entirely evil way to override the whole event delivery
machinery that Clutter has in place.
A pointer grab can be effectively replaced by a much more reliable
::captured-event signal handler, for instance.
Sometimes, grabs are a necessary evil -- and that is why Clutter
exposes them in the API; that should not fool anyone into thinking
that they should be used unless strictly necessary.
When calling clutter_actor_animate() on an actor that is being
currently animated the default behaviour is to update the duration
of the animation; the easing mode; update all the common properties;
and finally add the new properties.
This:
clutter_actor_animate (actor, 500, CLUTTER_LINEAR,
"width", 100,
"height", 100,
NULL);
clutter_actor_animate (actor, 250, CLUTTER_EASE_IN_CUBIC,
"x", 100,
"y", 100,
"height", 200,
NULL);
Is logically equivalent to:
clutter_actor_animate (actor, 250, CLUTTER_EASE_IN_CUBIC,
"x", 100,
"y", 100,
"width", 100,
"height", 200,
NULL);
The documentation of the function should be slightly more verbose
in describing the default behaviour.
The generation of the GObject introspection data has broken
the distcheck phase.
The location of the header and source files should always be
depending on the $(top_srcdir) and $(srcdir) variables,
respectively; the special handling of the COGL API inside the
GIR generation should also take those two variables into
account.
COGL should ship its own pkg-config file, obviously still pointing
to Clutter's compiler flags and linking options, for COGL-specific
variables that might be queried at configure time.
For instance, it's easier (and less verbose) to do:
PKG_CHECK_EXISTS([cogl-gl-1.0],
[has_gl_backend=yes],
[has_gl_backend=no])
Than doing:
AC_MSG_CHECKING([for GL support in COGL])
cogl_backend=`$PKG_CONFIG --variable=cogl clutter-0.9`
if test x$cogl_backend = xgl; then
has_gl_backend=yes
AC_MSG_RESULT([found])
else
has_gl_backend=no
AC_MSG_RESULT([not found])
fi
ClutterShader contains a lot of duplication, as the vertex and fragment
shader code paths are mostly the same.
The code should be simplified by adding new internal functions that can
be called with a value from the already present ClutterShaderType
enumeration.
In the future it'll also be possible to deprecate the current split API
and expose the generic accessors instead.
The ClutterColor API has some inconsistencies:
- the string deserialization function does not match the rest of
the conversion function naming policy; the naming should be:
clutter_color_parse() -> clutter_color_from_string()
and the first parameter should be the ClutterColor that will
be set from the string, not the string itself (a GDK-ism).
- the fixed point API should not be exposed, especially in the
form of ClutterFixed values
- the non-fixed point HLS conversion functions do not make any
sense. The values returned should be:
hue := range [ 0, 360 ]
luminance := range [ 0, 1 ]
saturation := range [ 0, 1 ]
like the current fixed point API does. Returning a value in
the [ 0, 255 ] range is completely useless
- the clutter_color_equal() should be converted for its use inside
a GHashTable; a clutter_color_hash() should be added as well
- the second parameter of the clutter_color_shade() function should
be the shading factor, not the result (another GDK-ism). this way
the function call can be translated from this:
color.shade(out result, factor)
to the more natural:
color.shade(factor, out result)
This somewhat large commit fixes all these issues and updates the
internal users of the API.
The CoglPango code falls under the COGL "jurisdiction"; this means
that it cannot include Clutter headers unless strictly necessary.
The CoglPangoRenderer code was using the CLUTTER_NOTE() macro. Now
that COGL has it's own COGL_NOTE() similar macro, CoglPango should
use that and avoid including clutter-debug.h (which pulls in
clutter-private.h which in turn pulls in clutter-actor.h).
A new flag, COGL_DEBUG_PANGO, has been added to the COGL debug
flags.
Bug 1493 - GL ES does not work since Jan 9 in PowerVR SGX 535, Intel
The mapped flag needs to be set on the stage otherwise
clutter_actor_queue_redraw will never queue a redraw and never draw
anything.
In these two backends there is not really a way to hide the stage so
they both set the mapped flag immediatly when clutter_actor_show is
called.
Using glEnable() directly confuses COGL and can result in problems
like subsequent pick operations not working correctly. Get the
material for the ClutterTexture and call cogl_material_flush_gl_state()
instead.
http://bugzilla.openedhand.com/show_bug.cgi?id=1483
When event delivery is invoked by synthetic events through
clutter_do_event from inside an event handler clutter was silently
ignoring it, this warning will hopefully help resolving some issues.
In the future if we want to annotate matrices with internal flags, and add
caching of the inverse matrix then we need to ensure that all matrix
modifications are done by cogl_matrix API so we'd know when to dirty the
cache or update the flags.
This just adds documentation to that effect, and assuming the most likley
case where someone would try and directly write to matrix members would
probably be to load a constant matrix other than the identity matrix; I
renamed cogl_matrix_init_from_gl_matrix to cogl_matrix_init_from_array to
make it seem more general purpose.
The font options accessors in ClutterBackend only deal with const
cairo_font_options_t values, since:
- set_font_options() will copy the font options
- get_font_options() will return a pointer to the internal
font options
Not using const in these cases makes the API confusing and might lead
to erroneous calls to cairo_font_options_destroy().
gcc warns about casting a pointer to a guint because it is a different
size on 64-bit machines. However the pointer is only used as a hash so
it doesn't matter if we lose the most significant bits. The patch
makes it use GPOINTER_TO_UINT instead which first casts it to a gulong
and avoids the warning.
Instead of creating a separate thread for each texture load, the loads
are now queued in a thread pool which will use at most 3 textures at a
time. This avoids the potentially large overhead of creating and
destroying a thread for every image while still avoiding throttling
the CPU if a large number of textures are loaded at the same time.
If the load is cancelled the old code needed to join the thread which
effectively meant it had to wait for the load to finish. With this
model the threads are owned by the thread pool so there is no need to
wait for them to finish. Instead, each thread is given its own thread
data which we can use to mark the thread as aborted. Once the load is
finished the thread will check whether it is aborted before setting
the texture data. That way the ClutterTexture can just disown threads
that it needs to cancel.
The duration in ClutterMedia is currently expressed in integer multiples
of a second. This does not offer enough granularity for media playback
that has fractionary durations -- 2.3 seconds; 1 minute, 23.4 seconds;
1 hour, 23 minutes, 4.5 seconds; etc.
The duration value should be expressed in seconds with a sub-second
granularity; for this reason, a double should be used insted of an
unsigned integer.
The semantics haven't changed: the :duration property still exposes
seconds.
Bug 1474 - ClutterMedia interface
The GET_INTERFACE() macro is still using the old type name of
the ClutterMedia interface structure in the cast.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1473 - CoglPixelFormat enum data must be declared static
When registering an enumeration GType, the GEnumValue or GFlagsValue
arrays must be declared static; otherwise, you get a segmentation
fault when calling the function again.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Instead of using a fixed size array for storing the scenegraph sub-node
during event delivery we should use a GPtrArray. The benefits are:
- a smaller allocation
- no undocumented yet binding constraint on the scenegraph size
The environment variable to disable mipmapping should also be
a command line switch, and be handled like the rest of Clutter's
environment variables/command line switches.
The ClutterFixed type and symbols are now equivalent to the native
float type. In order to remove ambiguity and clean up the code, any
usage of ClutterFixed and relative macros has been removed.
Clutter is able to show debug messages written using the CLUTTER_NOTE()
macro at runtime, either by using an environment variable:
CLUTTER_DEBUG=...
or by using a command line switch:
--clutter-debug=...
--clutter-no-debug=...
Both are parsed during the initialization process by using the
GOption API.
COGL would benefit from having the same support.
In order to do this, we need a cogl_get_option_group() function in
COGL that sets up a GOptionGroup for COGL and adds a pre-parse hook
that will check the COGL_DEBUG environment variable. The OptionGroup
will also install two command line switches:
--cogl-debug
--cogl-no-debug
With the same semantics of the Clutter ones.
During Clutter initialization, the COGL option group will be attached
to the GOptionContext used to parse the command line options passed
to a Clutter application.
Every debug message written using:
COGL_NOTE (SECTION, "message format", arguments);
Will then be printed only if SECTION was enabled at runtime.
This whole machinery, like the equivalent one in Clutter, depends on
a compile time switch, COGL_ENABLE_DEBUG, which is enabled at the same
time as CLUTTER_ENABLE_DEBUG. Having two different symbols allows
greater granularity.
Mipmapped text is enabled by default in Clutter but it can cause
problems on some drivers so it is convenient to have an environment
variable to disable it for all apps.
An assert to verify there was no error when generating a buffer object
for the vertex buffer API was being hit when running the GLES1 conformance
tests.
Bug #1457 - Creating a new texture messes up the cogl material state
cache; reported by Neil Roberts
We still don't have caching of bound texture state so we always have to
re-bind the texture when flushing the GL state of any material layers.
Bug #1460 - Handling of flags in cogl_material_set_color
Cogl automatically enables/disables blending based on whether the source color
has an alhpa < 1.0, or if any textures with an alpha component are in use, but
it wasn't doing it quite right.
At the same time I removed some of the dirty flags which on second thought
are nothing more than micro-optimsations that only helped clutter the code.
thanks to Owen Taylor for reporting the bug
Since the CoglMatrix type was added for supporting texture matrices recently
it made sense to be consistent accross the Cogl API and use the Cogl type
over the GL style GLfloat m[16] arrays.
The INCLUDES directive should only contain pre-processor flags, since
we're passing it also to the introspection scanner.
Using AM_CFLAGS for compiler flags, like debug flags and maintainer
flags, is more indicated.
Bug 1442 - multistage, same-window resize events invalidate stage
When ensuring that the GL context is attached to the correct
ClutterStage we need to set the SYNC_MATRICES flag on the stage
itself. This is needed in case the size of the new stage does
not match the size of the old -- thus requiring a call to
glViewport() when the paint cycle starts.
cogl_wrap_glActiveTexture needs to call the GL version of
glActiveTexture otherwise the subsequent calls to glBindTexture will
all be using texture unit 0. This fixes test-cogl-multitexture.
Previously the texture unit settings were stored in growable GArrays
and every time a new texture unit was encountered it would expand the
arrays. However the array wasn't copied when stored in a
CoglGles2WrapperSettings struct so all settings had the same
array. This meant that it wouldn't detect that a different program is
needed if a texture unit is disabled or enabled.
The texture unit settings arrays are all now a fixed size and the
enabledness of each unit is stored in a bit mask. Therefore the
settings can just be copied around by assignment as before.
This puts a limit on the number of texture units accessible by Cogl
but I think it is worth it to make the code simpler and more
efficient. The material API already poses a limit on the number of
texture units it can use.
configure.ac: Check for gobject-introspection
build/introspection.m4: Include the file that defines the
GOBJECT_CHECK_INTROSPECTION m4 macro in case we want to disable
the introspection data generation.
clutter/json/Makefile.am: Build the .gir for "ClutterJson"
(json-glib as part of the Clutter library)
clutter/Makefile.am: Build the .gir for clutter, compile the
Clutter and ClutterJson girs into typelibs, and install them.
Also move GCC_FLAGS from $(INCLUDES) to $(AM_CFLAGS) since it includes
non-preprocessor flag like -Wall.
See also:
http://bugzilla.openedhand.com/show_bug.cgi?id=1450
Based on a patch by: Owen W. Taylor <otaylor@fishsoup.net>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Add annotations such as (transfer-none) (out) (element-type ClutterActor),
and so forth to the doc comments as appropriate.
The annotations added here are a combination of the annotations previously
in gir-repository for Clutter and annotations found in a review of all
return values with that were being parsed with a transfer of "full".
http://bugzilla.openedhand.com/show_bug.cgi?id=1452
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1464 - clutter_timeline_list_markers should set n_markers=0 when
there are no markers
If no markers are registered and we bail out we should also set the
n_markers out parameter to 0 so that code checking the number of
markers will still work.
Bug 1465 - clutter_path_parse_description should check p==NULL
When accepting a stringified path description, ClutterPath methods
and the parser should not accept NULL or empty strings.
Bug 1463 - clutter_color_lighten(darken) unexpected because of
ClutterFixed=>float
These two functions contained ClutterFixed constants represented as
integers which are no longer valid since the cogl-float branch
merge. They are now converted to ClutterFixed from float constants
using CLUTTER_FLOAT_TO_FIXED (which is now a no-op).
Thanks to Zhang Wei for reporting.
This causes clutter to skip all the GL work of state changes and
texturing if the opacity was 0. This is done in ClutterTexture and not
ClutterActor to ensure that pre and post paint signals work correctly.
Other expensive actors should be doing the same thing.
The call to "cmp" to compare a built file with its current version
should use the -s (silent) command line switch. This avoids a ugly
message on the console when building Clutter the first time.
When setting the COGL texture handle for a ClutterTexture the
texture will be set as the first layer of the material used
by the ClutterTexture. The documentation should clarify this
point.
The :texture and :material properties of ClutterTexture use a
Clutter-provided GType shielding from CoglHandle. Since CoglHandle
now has a GType we can use COGL_TYPE_HANDLE instead.
This commit also removes the conditional compilation of the
:material property, as it makes little sense now that the
Materials API has landed.
COGL types should be registered inside the GType system, for
bindings and type checking inside properties and signals.
CoglHandle is a boxed type with a ref+unref semantics; slightly evil
from a bindings perspective (we cannot associate custom data to it),
but better than nothing.
The rest of the exposed types are enumerations or bitmasks.
The COGL_DEFINE_HANDLE macro generates a cogl_is_<type> function
as well, to check whether a CoglHandle opaque pointer is of type
<type>.
The handle for CoglMaterial does not export cogl_is_material() in
its installed header.
The rotation angle calculated in clutter_behaviour_rotate_alpha_notify
gets applied to each actor using clutter_behaviour_actors_foreach. The
angle is a ClutterFixed value. Before the cogl float branch merge it
was stuffed into a gpointer using GPOINTER_TO_UINT. The pointer was
then converted back to a uint and cast to a ClutterFixed which worked
out fine even for negative numbers.
After the cogl-float merge the angle is effectively a gfloat. This
gets cast to a uint and stored in a pointer and converted back to a
float via a uint at the other end. However this fails for negative
numbers because a uint -> float conversion can't take advantage of
overflow to preserve the sign so you end up with a large number.
It also had the side effect that it only rotated in whole degrees.
This commit fixes the problem by just passing the ClutterFixed value
inside a closure struct instead of trying to stuff it into a pointer.
Bug 1167 - clutter_effect_rotate improperly clamps negative angles
The rotation angle properties had a minimum value of 0.0 but the
rotation works fine with a negative value so the limitation is
unnecessary. This makes rotation using the ClutterAnimation API more
flexible because it was previously not possible to rotate
counter-clockwise from the 0.0 position.
When rendering a clone before this commit the clone's opacity was
combined with the opacity of the source but this is not usually the
desired effect. Instead the clone's opacity (combined with its
parents) should completely override the opacity of the source.
