This will query a device state; position and modifiers.
Note that ClutterSeat subclasses don't implement the vmethod yet,
so calling clutter_seat_query_state() may crash ATM.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1403>
Testing points and rays against boxes is substantially cheaper - in
fact, almost trivial - compared to triangles. Check if the actor's
paint volume doesn't intersect with the current pick point / ray,
and skip recursing altogether in those cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1520>
The cached pick mode never actually cached anything, since it is
always, unconditionally reset when painting. Furthermore, next
commits will cull out actors during pick, which makes the pick
stack uncacheable.
Remove the cached pick mode.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1520>
Users of Debian arm64 (aarch64) report that on at least some GPUs
or screens, after time-based screen blanking has occurred, it is not
possible to unlock the screen. Bisection indicates that this regressed
in commit 209b1ba3, so presumably this is because a refresh rate of 0
is reported while the screen is blanked, leading to the frame clock
pausing forever.
Fixes: 209b1ba3 "clutter/frame-clock: Adapt refresh rate from to frame info"
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1536
Bug-Debian: https://bugs.debian.org/974172
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1601>
It's currently possible that some last_paint_volumes don't get updated
during a paint cycle, this can happen when a ClutterOffscreenEffect is
used: The offscreen effect might skip painting the content and the
children of an actor because it uses its own offscreened texture
instead. This means the offscreen effect doesn't call
clutter_actor_continue_paint(), and thus the the last_paint_volumes of
the children won't be updated.
Now one might think that isn't a problem, because as soon as a child
changes it's size or position, the offscreened texture would get
invalidated and clutter_actor_continue_paint() would get called. It's
not that easy though: Because the last_paint_volume includes all the
transformation matrices up to eye-coordinates, it has to be updated on
any changes to matrices, which includes position/transformation changes
to any actor up the hierarchy.
Now that's where get into problems with the offscreen effect: In case of
transformation changes to the offscreened actor or an actor up the
hierarchy, the offscreened texture won't get invalidated (that makes
sense, we can simply paint it transformed) and the last_paint_volumes
won't get updated even though they should.
This leaves us around with outdated last_paint_volumes where
last_paint_volume_valid is still set to TRUE. It can cause issues with
culling and clipped redraws.
So fix that by ensuring that all children that would get painted by
Clutter get their last_paint_volumes updated in case a ClutterEffect
decided not to call clutter_actor_continue_paint().
This ignores the case where a paint() vfunc override does the same and
doesn't call clutter_actor_paint() on children. Let's ignore this case
for now, there shouldn't be any implementation which does that and
ideally in a world that's painted solely by ClutterContent, we can get
rid of that vfunc in the future.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1591>
The first comment isn't really needed anymore since
the is_full_stage_redraw_queued() underneath is quite self-explaining.
Also rephrase the second comment a bit, including that
_clutter_paint_volume_get_stage_paint_box() does the aligning to the
pixel grid.
Finally, the last comment also looks out of date since we do that
rounding inside _clutter_paint_volume_get_stage_paint_box(), so remove
it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1511>
We currently pass actors a reference to their associated
ClutterStageQueueRedrawEntry when queueing a redraw. This "splitting" of
the ownership of the entry has introduced quite a few bugs in the past
and is hard to follow.
So give up the "splitting" of the ownership and exclusively handle those
entries inside ClutterStage. To still allow removing the entry when an
actor gets unrealized introduce clutter_stage_dequeue_actor_redraw()
similar to what we already have for relayouts.
To be able to efficiently find entries when actors queue redraws, make
pending_queue_redraws a GHashTable, which fits quite nicely and also
allows removing the QueueRedrawEntries actor pointer in favour of the
key of the hashtable.
Since the struct is now private to ClutterStage, we can also rename it
to QueueRedrawEntry.
While at it, also sneak in the removal of the leading underscore from
clutter_stage_queue_actor_redraw().
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1511>
The "queue-redraw" signal is not used anywhere in Clutter and we now
also removed the vfunc implementation of the stage. So stop emitting it
and remove it, but keep the propagate_queue_redraw infrastructure to
make sure clones still get their redraws queued.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1511>
Since we now decoupled the "queue-redraw" signal from creating the stage
clip, we can move signal emission into
_clutter_actor_queue_redraw_full() and emit the signal right away when
queueing a redraw on an actor. With that we now no longer have to
accommodate for the stage pending_queue_redraws list changing while
iterating over it.
To ensure we don't emit the signal too often when multiple redraws are
queued on one actor, use the propagated_one_redraw flag to limit the
number of emissions to a single one for every update cycle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1511>
Putting together the redraw clip of the stage never really fitted nicely
with the "queue-redraw" signal emission, it forces us to emit the
signals in a batch and we also use a weird trick to get the old paint
volume that's already on-screen into the final redraw clip (we call
_clutter_actor_propagate_queue_redraw() on the stage).
So start breaking up this association by making the stage explicitely
request the redraw clip from the actor and removing the
ClutterPaintVolume argument from _clutter_actor_finish_queue_redraw().
This is done by adding a private function
clutter_actor_get_redraw_clip() which returns our old (currently
visible) paint volume and the new paint volume.
This also allows removing the check whether a full stage redraw has been
queued in clutter_actor_real_queue_redraw() and we can now just stop the
signal emission if a propagation happened at least once.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1511>
The most common case for Clutter is 2D axis-aligned actors, which
maintain these properties even after projecting to eye coordinates.
In those cases, we can use a simpler hit test by checking against
boxes.
Not only this is simpler, but this maintains an important aspect
of picking that is a requirement for Clutter: watertightness. Even
though the triangles checks do work on x86_64, they do not guarantee
watertightness. This breaks tests on ARM.
Use graphene_box_t to hit-test axis-aligned 2D actors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1599>
clutter_actor_paint() implements a clear preference for custom clips
over clip_to_allocation: If a custom clip is set, clip_to_allocation is
ignored.
Since the paint volume reflects what Clutter is going to paint, we
should handle it the same when putting together our paint volume: So
first handle custom clips, and if one is set, use that. Then handle
clip_to_allocation, and if that's set, use that. And finally, if both
aren't set, union our allocation with the children paint volumes to get
the building volume.
clutter_actor_paint() also doesn't check whether the custom clip is
empty: If that's the case, it will simply not paint anything. Given that
that's allowed by clutter_actor_paint(), the paint volume should also
follow here and return an empty paint volume in case the custom clip is
empty.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1592>
When a custom clip is set for an actor, this actor is not going to allow
any painting outside that clip. That includes the children, which may
also not paint outside that clip.
Now in case clip_to_allocation is set to TRUE, we already already do the
right thing and simply use the allocation as our paint volume, ignoring
the volumes of our children. The same should be done for the custom
clip, so also stop the process of building the paint volume once we see
that a custom clip is set and simply use that clip.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1592>
When using CLUTTER_DEBUG_PAINT_DAMAGE_REGION, the blue swap region is
always a superset of the red redraw region. So painting both in full (since
the previous commit) just meant the red region was overdrawn and came out
purple. That doesn't provide enough visual contrast, changes the user
experience unexpectedly and reduces performance.
So just subtract the redraw region from the swap region. This way the
red redraw region is always red, not purple.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1571>
Previously when CLUTTER_DEBUG_PAINT_DAMAGE_REGION was set, that would lead
to has_buffer_age==FALSE, which would lead to use_clipped_redraw==FALSE
which would mean swap_region was always empty. And so the blue region of
CLUTTER_DEBUG_PAINT_DAMAGE_REGION was always empty, *and* fb_clip_region
was always the full view rectangle which is not useful for debugging.
Now when CLUTTER_DEBUG_PAINT_DAMAGE_REGION is set, we don't let that
affect use_clipped_redraw, which means fb_clip_region is calculated
realistically.
But that's not enough. Calculating fb_clip_region properly with
CLUTTER_DEBUG_PAINT_DAMAGE_REGION would still lead to colouring artefacts
left on screen from previous frames that don't apply to the current frame.
So to fix that we also paint_stage for the whole screen every time when
using CLUTTER_DEBUG_PAINT_DAMAGE_REGION.
So now you will only ever see red and blue shading that's applicable to
the current frame, and no artefacts from the previous frames.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1535
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1571>
It was being painted without scaling and offsetting so would only look
right at scale 1.0 and only on the view with origin (0,0). Now we include
the framebuffer scale and view origin it will be painted in the correct
location.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1571>
As explained in https://gitlab.gnome.org/GNOME/mutter/-/issues/1494,
with commit 29caa5bea5 we stopped queueing
a relayout for the parent of the removed actor in
clutter_actor_remove_child_internal(). This relayout was, as opposed to
the relayout in clutter_actor_real_hide()/clutter_actor_real_unmap(),
queued unconditionally without looking at the parents NO_LAYOUT flag.
Now while that relayout in clutter_actor_remove_child_internal() would
do unnecessary work if the parent had the NO_LAYOUT flag set, it did
also queue a redraw of the parent, which is necessary in any case.
So by removing that relayout in clutter_actor_remove_child_internal(),
we stopped queueing redraws for NO_LAYOUT parents when a child gets
removed from the scenegraph. This caused bugs where the texture of the
child would be left visible on the screen even though the child got
destroyed.
To fix this, make sure again that we always queue a redraw on the parent
when unmapping a child.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1494
The redraw_pending boolean is used to schedule the first stage update
after starting Clutter. This flag is superfluous because we have the
pending_finish_queue_redraws flag which does the same.
While at it, also remove the redraw_count debug variable, since there
should be better ways to count the number of queued redraws nowadays,
for example Sysprof marks.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1527
Queueing a redraw with a clip is easy enough and this function is
private anyway, so remove it and call _clutter_actor_queue_redraw_full()
instead in the one function using it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1527
ClutterRedrawFlags are a way to give Clutter additional context
about what it needs to redraw. There currently is only one flag defined,
CLUTTER_REDRAW_CLIPPED_TO_ALLOCATION, this flag would clip the redraw to
the actors current allocation.
Since ClutterActor also provides the clip_to_allocation property (which
affects the paint volume of the actor instead of only one redraw), the
additional CLIPPED_TO_ALLOCATION flag seems unnecessary. It's also only
defined to be used privately in Clutter, which it never is, so let's
remove it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1527
Turns out the g_signal_has_handler_pending() call in
update_stage_views() is actually more expensive than comparing the
sorted list (which is usually very short), so remove that and simply
always emit the signal.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1524
This commit introduces a few important changes in order to
acommodate graphene_ray_t. Most of them are positive changes,
so don't panic :)
The first very visible change is that neither the actor box
nor the clip rectangles are projected before being pushed.
This required changing the parameters of the related functions
at both ClutterPickContext, and ClutterPickStack, to receive
boxes instead of vertices. These rectangles are projected on
demand now, so in the best case (first actor picked) only
one projection happens; and in the worst case, it projects
as much as it does now.
The second important change is that there are no more checks
for axis-alignment anymore. That's because picking now happens
in 3D space, using triangles.
Talking about triangles in 3D space, this is what is used now
for picking. We break down each actor rectangle in 2 triangles,
and check if the projected pick point is inside any one of them,
of if the ray intersects any one of them. The same check happens
for the clip rectangles.
Checking the projected pick point is both an optimization for the
2D case, and a workaround to graphene_ray_t problems with float
precision, which is specially visible on edges such as the top
bar.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1509
ClutterPickStack is a new boxed type that stores the vertices
and clip rectangles. It is meant to be a byproduct of picking,
and takes over most of what ClutterStage currently does.
It introduces a 'seal' system, inspired by MetaKmsUpdate. After
the pick operation is done, and the rectangles are collected,
the pick stack is sealed, and is not allowed to be externally
modified anymore. Internally, it still can invalidate pick
records when an actor is destroyed.
For now, it handles both the clip rectangles, and the matrix
stack, separatedly. Future commits will rearrange this.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1509
The "paint" signal of ClutterActor has been a pain for everyone involved
long enough now, turns out we actually use it nowhere except tests
anymore (which has been handled in the last commits), so get rid of it
for good before anyone starts using it again.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1522
This is a bit scattered around, with the setter/getter in Clutter, and
it only being only directly honored in Wayland (it goes straight through
device properties in X11).
Make this private native API, and out of public ClutterInputDevice API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
Since commit eb9cd3857d we initialize the allocation of ClutterActors to
an UNINITIALIZED ClutterActorBox. We do that to ensure the actor even
emits notify::allocation in case it got a new valid allocation of
0,0,0,0.
Now there's still the case where an actor gets removed from the
scenegraph and added again to a different parent, in this case we still
don't emit notify::allocation right now in case the new allocation
equals the old one. There's two good reasons to do so though:
1) To Clutter, there's no difference between a newly created actor and
an actor which got removed from the scenegraph, it's not consistent to
always notify the allocation property in the former situation, but not
always notify it in the latter situation.
2) When an allocation changes, Clutter notifies the subtree of that
actor about an absolute geometry change (see the call to
transform_changed() in clutter_actor_set_allocation_internal()). Now
when an actor gets reparented, obviously the absolute geometry might
change, so to make sure transform_changed() is always called in that
case we need to make sure an allocation change happens.
So simply reset the allocation property of the actor to an UNINITIALIZED
ClutterActorBox as soon as it gets unrealized.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1498
We introduced the absolute_origin_changed flag when preparing for the
removal of ClutterAllocationFlags in commit dc8e5c7f8b. Turns out in the
mean-time commit df4eeff6f2 happened, which renders the whole
absolute_origin_changed flag moot.
That's because we now notify the whole subtree about the absolute origin
change by calling transform_changed() when the allocation of an actor
changes. transform_changed() traverses the subtree and calls
absolute_geometry_changed() on every actor immediately, which renders
the whole propagation of the absolute_origin_changed flag obsolete.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1498
Since we now moved the queuing of relayouts into the mapping and
unmapping functions, we no longer need to do it when adding or removing
a child, that's because removing a child always unmaps the child, and
adding it to a stage (if it's visible) will map it.
So remove those calls to queue_relayout() since they're no longer
needed.
With the above we no longer queue a relayout in
clutter_actor_add_child_internal(), that means there's one place where
we need to explicitely queue relayouts now: That's when using the
set_child_at_index/above/below() APIs, those are special because they
avoid unmapping and mapping of actors and would now no longer get a
relayout.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
In theory there's no big difference between only handling mapped actors
vs only handling visible actors in clutter_actor_allocate(): The
function is called recursively starting with an actor that is attached
to a stage, so it should only be called on mapped actors anyway.
The behavior of skipping hidden actors was introduced as an optimization
with commit 0eab73dc. Since the last commit, we handle
enable_paint_unmapped a bit better and don't do unnecessary work when
mapping or unmapping, so we can now be a bit stricter enforcing our
invariants and only allow mapped actors in clutter_actor_allocate().
We need to exclude toplevel actors from this check since the stage has a
very different mapped state than normal actors, depending on the
mappedness of the x11 window. Also we need to make an exception for
clones (of course...): Those need their source actor to have an
allocation, which means they might try to force-allocate it, and in that
case we shouldn't bail out of clutter_actor_allocate().
Also moving the clutter_actor_queue_relayout() call from
clutter_actor_real_show() to clutter_actor_real_map() seems to fix a bug
where we don't queue redraws/relayouts on children when a parent gets
shown.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2973https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
We currently support only one case where an actor can get mapped or
unmapped during painting, that is using
_clutter_actor_enable_paint_unmapped() (although we could arguably do a
better job explicitely forbidding it in other cases). This function is
called when painting ClutterClone or MetaWindowActors during
screensharing. It temporarily (fake) realizes and maps the actor and all
its children so it can get painted.
Now a problem will appear when we'll start coupling layout and the
mapped state of actors more closely with the next commit: Since
enable_paint_unmapped() is meant to be enabled and disabled during every
clone paint, we also notify the "mapped" property twice on every clone
paint. That means with the next commit we would queue a relayout for the
source actor on every clone paint.
To avoid this unnecessary work, check whether we're being painted while
unmapped using the new unmapped_paint_branch_counter. Then avoid queuing
relayouts or invalidating paint volumes in that case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Add new private API to ClutterActor, returning TRUE in case the actor is
being painted while unmapped. This is useful for implementations of the
paint() vfunc or for signal handlers of the "notify::mapped" signal.
Use this API in CallyActor to properly detect "notify::mapped" emissions
while painting unmapped, this fixes detecting the case where
painting-unmapped is used for screencasting.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Just like the existing in_cloned_branch counter, add a property which
tracks whether the actor is part of a subtree that's being painted while
unmapped. This is going to be useful for a few things, for example
changing the clutter_actor_is_in_clone_paint() API to use
enable_paint_unmapped instead of in_clone_paint.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
clutter_actor_queue_relayout() detects whether a parent has the
NO_LAYOUT flag set by itself and then queues a shallow relayout for us.
There's no need to duplicate that logic when showing actors, so simply
call clutter_actor_queue_relayout() and let that handle it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Apparently clutter_paint_volume_union() has problems building the union
of two paint volumes in eye coordinates, that's probably because of the
negative coordinates that come into play there.
Circumvent that by making even more use of Graphene and letting it take
care of computing the union. We do that by creating two graphene_box_t's
from the axis-aligned paint volumes and intersecting those boxes, then
setting our vertices to the new min and max points of the resulting box.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1507
Add a helper function to determine if a seat has a (physical)
touchscreen associated with it.
Currently src/backends/meta-backend.c has a private version of this
(check_has_physical_touchscreen) and further patches in this patch-set
need the same functionality. So add a generic helper for this to
avoid code duplication.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
_cogl_util_get_eye_planes_for_screen_poly() is quite a complicated beast. Ever
since Clutter became a compositor toolkit, and specially after we switched to
graphene_frustum_t on paint volumes, we can brutally simplify this function.
The new code assumes camera is at (0, 0, 0) at world coordinates (i.e. before
applying the projection). We also consider that the redraw clip are at stage
coordinates. That means that converting the clip rectangle to world rectangle
is simply a matter of projecting the corresponding vertices using the "view"
matrix. Furthermore, we only need to project the top-left, and bottom-right
vertices, since top-right and bottom-left can be derived from those two.
The frustum setup still uses triplets of vertices to setup the planes, except
now the first vertex is always the camera (hardcoded to 0, 0, 0), and the other
two vertices are the projected clip rectangle vertices.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
The redraw clip region may contain multiple clip rectangles. We currently
only use the extents of this region, but having multiple frusta for each
rectangle is a better alternative, and will allow us to remove the extra
projection we currently do.
Make the clip frustum an array, with multiple frusta.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
The clip planes / frustum are contextual to painting. In the past, for
the lack of a better place, it was added to ClutterStage, but now we
have an appropriate home for such data: ClutterPaintContext.
Move the frustum to the paint context.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
While refactoring the clipping planes / frustum code, it became more and
more evident that we do not need to update them while picking. Picking
nowadays goes through a completely different code path, that does not
rely on paint volume culling.
While it might be interesting to eventually also cull out based on paint
volumes, it certainly won't go through the painting code anymore.
Remove setting up the view when picking, and rename functions appropriatedly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Culling paint volumes don't give this level of detail anymore, and in
fact knowing whether it was partially or fully in was only being used
in a debug path. For the purposes of culling, it doesn't matter if a
given actor is partially or completely inside the frustum; either way,
it must be painted.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Instead of 4 planes, use a graphene_frustum_t to store the clipping
planes.
The cautious reviewer might noticed that we are now setting up 6
planes: the 4 planes we were doing before, plus 2 extra planes in
the Z axis. These extra planes simulate an "infinite" Z far, and
an "on-camera" Z near.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
ClutterStage defines the 8 vertices of a frustum:
4 ----------------------------- 5
| \ / |
| \ / |
| 0 --------------------- 1 |
| | | |
| | | |
| 3 --------------------- 2 |
| / \ |
| / \ |
7 ----------------------------- 6
Then, it uses triplets of vertices to create each clipping plane.
It only sets up 4 planes (it doesn't clip based on depth), defined
by the following vertices:
* 0 - 4 - 5
* 1 - 5 - 6
* 2 - 6 - 7
* 0 - 7 - 4
The first 3 triplets are selected using the for-loop. However, the
last triplet is different, and is done out of the loop. It could
have been made simpler by using the "3 - 7 - 4" triplet.
Simplify the current code by using the suggested triplet, calculated
inside the for-loop.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Instead of our own implementation that upscales, then downscales back,
use graphene_matrix_inverse() directly. This is possible after switching
to a z-near value that doesn't have problems with float precision.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Picking is specially sensitive for float precision, and tests can
easily fail when something changes, even if ever so slightly. A
simple way to workaround this is by adjusting the projected points
using the same procedure described at 67cc60cbda.
Round projected points for picking to 256ths.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
A first step towards abandoning the CoglObject type system: convert
CoglFramebuffer, CoglOffscreen and CoglOnscreen into GObjects.
CoglFramebuffer is turned into an abstract GObject, while the two others
are currently final. The "winsys" and "platform" are still sprinkled
'void *' in the the non-abstract type instances however.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1496
The timestamp sent with _NET_WM_FRAME_DRAWN should be in "high
resolution X server timestamps", meaning they should have the same scope
as the built in X11 32 bit unsigned integer timestamps, i.e. overflow at
the same time.
This was not done correctly when mutter had determined the X server used
the monotonic clock, where it'd just forward the monotonic clock,
confusing any client using _NET_WM_FRAME_DRAWN and friends.
Fix this by 1) splitting the timestamp conversiot into an X11 case and a
display server case, where the display server case simply clamps the
monotonic clock, as it is assumed Xwayland is always usign the monotonic
clock, and 2) if we're a X11 compositing manager, if the X server is
using the monotonic clock, apply the same semantics as the display
server case and always just clamp, or if not, calculate the offset every
10 seconds, and offset the monotonic clock timestamp with the calculated
X server timestamp offset.
This fixes an issue that would occur if mutter (or rather GNOME Shell)
would have been started before a X11 timestamp overflow, after the
overflow happened. In this case, GTK3 clients would get unclamped
timestamps, and get very confused, resulting in frames queued several
weeks into the future.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1494
Keeping track of the projected position is costly, and adds quite some complexity
to ClutterOffscreenEffect.pre_paint(). As far as research goes, there's not a
single consumer of this function that uses the position for anything - only size
is used.
Remove clutter_offscreen_effect_get_target_rect(), and drop the annoying position
field from ClutterOffscreenEffect as well. This allows us to stop projecting the
position on pre-paint, and simplify things.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1474
ClutterPipelineNode will be used by GNOME Shell in the future.
Fortunately for us, CoglPipeline is already usable from GJS,
so we don't need to skip the constructor for the pipeline node.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1474
Move unreffing the framebuffer to ClutterOffscreenEffect.pre_paint().
This will allow us to properly chain up ClutterOffscreenEffect.paint()
and not reimplement exactly what ClutterEffect does by default.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1474
In this case, since we are building the entire matrix by ourselves,
reverse the order of operations (translate + scale → scale + translate)
and build it using graphene-specific APIs.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
This is another instance of graphene reversing the order of operations (see
the commit notes of how ClutterActor was ported.) The tl;dr; here is that,
in the CoglMatrix past, we used to do:
(actor transforms) → scale
and now, it's the other way round:
scale → (actor transforms)
due to changing from right-handed multiplications (CoglMatrix) to left-handed
ones (graphene_matrix_t).
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
ClutterActor is a particularly heavy user of matrices, and
switching to graphene_matrix_* APIs means we had to change
the order of operations due to left-hand vs right-hand
differences.
When applying the actor transform, there are 2 main branches
that can be followed: the default transforms, and when a
custom transform is set.
To facilitate review, here's the table that I've made to
guide myself:
+--------------- Case 1: Default Transforms --------------+
| CoglMatrix | graphene_matrix_t |
+----------------------------+----------------------------+
| multiply (child transform) | translate (-pivot) |
| translate (allocation)¹ | rotate_x (angle) |
| translate (pivot)¹ | rotate_y (angle) |
| translate (translation)¹ | rotate_z (angle) |
| scale (sx, sy, sz) | scale (sx, sy, sz) |
| rotate_z (angle) | translate (translation)¹ |
| rotate_y (angle) | translate (pivot)¹ |
| rotate_x (angle) | translate (allocation)¹ |
| translate (-pivot) | multiply (child transform) |
+----------------------------+----------------------------+
¹ - these 3 translations are simplified as a single call
to translate(allocation + pivot + translation)
+---------------- Case 2: Custom Transform ---------------+
| CoglMatrix | graphene_matrix_t |
+----------------------------+----------------------------+
| multiply (child transform) | translate (-pivot) |
| translate (allocation)² | multiply (transform) |
| translate (pivot)² | translate (pivot)² |
| multiply (transform) | translate (allocation)² |
| translate (-pivot) | multiply (child transform) |
+----------------------------+----------------------------+
² - likewise, these 2 translations are simplified as a
single call to translate(allocation + pivot)
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
CoglMatrix already is a typedef to graphene_matrix_t. This commit
simply drops the CoglMatrix type, and align parameters. There is
no functional change here, it's simply a find-and-replace commit.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
Ideally, we would use Graphene to do that, however as of now Graphene
lacks these APIs so we still need these helpers. Since we're preparing
to get rid of CoglMatrix, move them to a separate file, and rename them
with the 'cogl_graphene' prefix.
Since I'm already touching the world with this change, I'm also renaming
cogl_matrix_transform_point() to cogl_graphene_matrix_project_point(),
as per XXX comment, to make it consistent with the transform/projection
semantics in place.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
Given that CoglMatrix is simply a typedef to graphene_matrix_t, we can
remove all the GType machinery and reuse Graphene's.
Also remove the clutter-cogl helper, and cogl_matrix_to_graphene_matrix()
which is now unused.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
It turns it to be quite easy to inverse the transform, and doing that
on ClutterActor level means we can actually think about removing
CoglMatrix entirely and using graphene_matrix_t everywhere.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
CoglMatrix doesn't have a 1:1 mapping of graphene functions, and
sometimes it's just not worth adding wrappers over it. It is easier
to expose the internal graphene_matrix_t and let callers use it
directly.
Add new cogl_matrix_get_graphene_matrix() helper function, and
simplify Clutter's matrix progress function.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
Rename cogl_matrix_get_array() to cogl_matrix_to_float(), and
make it copy the floats to an out argument instead of returning
a pointer to the casted CoglMatrix struct.
The naming change is specifically made to match graphene's,
and ease the transition.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
Graphene provides skewing as part of graphene_matrix_t API, and it'll
be easier for the transition to just expose similar API surfaces.
Move the matrix skew methods to CoglMatrix.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1439
