With workspaces now being stacked vertically, the horizontal
indicators in the workspace switcher are rather odd. There are
some designs for an improved workspace switch animation, but
it may take a while to implement them, so for now just change
the orientation of the existing switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=641931
Point the arrow to the center of the sourceActor's content box, rather
than its allocation, in case it has asymmetric padding (as the
rightmost message tray summary item does).
https://bugzilla.gnome.org/show_bug.cgi?id=641728
Commit c86a977564 removed :pressed from the list of styles which
highlight panel buttons, so the button highlight is now lost when
mousing over menu items. This is not the behavior we want, the
buttons should keep their highlight while being "active". Rather
than adding back the pseudo class to the CSS, let buttons use the
:active pseudo class when the menu is open, which makes more sense
than :pressed anyway.
The status icon should always be visible if more than two layouts
are configured. The settings key which was used to enforce hiding
the icon in this case as well has already been removed from the
g-s-d schema, causing an error on startup.
Intead of using a St.Group and tweening the position of the controls
actor, use a St.GenericLayout and tween a Javascript property. This
allows us to more reliably track the height of the overall workspace
display and propagate it to the controls actor.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With workspace thumbnails, we don't switch workspaces when dragging windows
between workspaces or adding new workspaces, so we also shouldn't switch
on launch.
* Add workspace parameters to shell_doc_system_open(),
shell_app_activate, shell_app_open_new_window()
* Pass a 'params' object when activating items in the overview with
two currently defined parameters: workspace and timestamp. (timestamp
is only implemented where it is easy and doesn't require interface
changes - using the global current timestamp for the shell is almost
always right or at least good enough.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
At the end of a drag operation, we would invoke the code to slide the
controls in (because we were no longer DND'ing and not hovering) and
then immediately afterwards invoke the code to slide it back out when
we got the ENTER event from the end of DND. While the immediately
overridden tween probably won't have any visible effect it's better
to avoid this, so wait to update the zoom state until BEFORE_REDRAW.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With automatic workspace management, explicit controls to add and
remove workspaces are no longer necessary. We also can remove the
use of addWorkspace for middle-button-click on a launcher since
launching on the last empty workspace will do the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With workspace thumbnails, we want to make workspace switching
something that happens largely under the users control, so don't
switch to newly added workspaces in the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Add workspace thumbnails to the workspace controls area. The user can
click on the thumbnail to switch workspaces and can also drag windows
out of the thumbnail to other workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Moving the base tracking of restacking to WorkspacesDisplay will allow
us to use it to update stacking in the workspace thumbnails as well as
in the main workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Instead of having a separation between popping the controls out on hover
and zooming out for DND, always do both at once. This is necessary because
when we added workspace thumbnails the controls will get bigger, so we need
to make sure we zoom out far enough so that the windows don't overlap the
controls.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
When checking the type of a DND source, instead of checking
'instanceof Workspaces.WindowClone' accept any actor with realWindow
and metaWindow properties. This will be useful to support a separate
type of actor dragged from workspace thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
The new plans for a row of workspace thumbnails on the right side of the
overview means that the mental model we present to the user will be
vertical, so switch the Metacity workspace layout to be vertical and
adjust the keybinding handling, animations, and workspace layout in
the overview to match.
(This commit does not change the workspace switching indicator pending
finalization of what we want to do with that - it still shows workspaces
arranged vertically.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
St.Button 'clicked' signal now has two arguments, and because we are also
passing an action id as an argument to the _onActionInvoked() callback,
we need to have the number of the signal arguments reflected accurately in
the function arguments.
https://bugzilla.gnome.org/show_bug.cgi?id=641809
This makes the animation feel more stable and keeps the left-most item expanded
when you move the mouse to the left in the tray.
The following behavior details are implemented by this patch:
- we wait to collapse an expanded item till after the tray is hidden if
we are hiding the tray
- we don't collapse an expanded item if the summary notification associated
with it is being shown, unless a different summary item is hovered over
- we don't consider the mouse hovering over a summary notification as
hovering over the tray, which allows us to collapse an expanded summary
item if it is not associated with the summary notification being shown
https://bugzilla.gnome.org/show_bug.cgi?id=636930
For historical reasons, we had both StClickable and StButton, which
were nearly identical. StButton was more widely-used, so keep that and
port all StClickable users to that.
https://bugzilla.gnome.org/show_bug.cgi?id=640583
It doesn't currently work, so hide it for now.
It's not clear it's going to stay around long term,
anyway. If it doesn't we can delete the code, then.
Otherwise, we can add the code back when we have
something that works.
https://bugzilla.gnome.org/show_bug.cgi?id=636680
Commit 91d8a32f25 let WindowClone forward the size-changed signal
of the "real" window, disconnecting the signal handler when the
clone is destroyed. In case the clone was destroyed due to the
MetaWindowActor being closed, this results in a warning
(gsignal.c:2392: instance `0x2a3fac0' has no handler with id `2955').
Handle the case where the original window is destroyed before its
clone.
1. Both functions leaked the nodes in priv->children
2. st_container_remove_all wasn't properly updating first_child and last_child
3. remove_all() is almost never right since it won't cause signal handlers
on the children to be removed. In the rare cases where it might be needed
the caller can simply use clutter_container_remove().
https://bugzilla.gnome.org/show_bug.cgi?id=640781
In non-US locales, Monday is generally considered the first day
of the week. Take this into account when building the event
lists displayed under "This week"/"Next week".
https://bugzilla.gnome.org/show_bug.cgi?id=641049
Signed-off-by: David Zeuthen <davidz@redhat.com>
When the current day does not exist in the next/prev month (like 31 Feb),
the next/prev buttons end up skipping the month.
Fix that by going to the last day of the month instead.
https://bugzilla.gnome.org/show_bug.cgi?id=641067
There are multiple code passes that can result in Notification::destroy()
being called, such as a notification being closed by the application
when it exits and the associated source being removed at the same time.
However, we should only emit 'destroy' for the notification and
do the associated work once.
Notification::destroy() now takes 'reason' as an optional argument.
Calling Notification::destroy() directly when connecting to 'destroy'
on Source, as we did before, was inadvertently passing 'source' as an
argument to the function.
https://bugzilla.gnome.org/show_bug.cgi?id=640976
This fixes emitting NotificationClosed for resident notifications
that are clicked, but are not actually destroyed.
This also ensures that we emit NotificationClosed in all cases when
a notification is destroyed, which can happen when:
- a non-resident notification is clicked
- an action is invoked on a non-resident notification
- an application the notification was associated with is focused
- a transient notification is done showing
- a notification was requested to be closed by the application
- a tray icon the notification was associated with is removed
https://bugzilla.gnome.org/show_bug.cgi?id=638071
Windows may change their size while the overview is open, e.g. when
switching panels in the control center. Make sure that the preview's
position and overlay are updated in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=640560
On button-release, a threshold is used to determine if the gesture
should be considered a click and thus ignored. While the drag is
active though, the controlled actor is dragged immediately. As a
result, dragging by a tiny amount does not trigger a snap back when
the action is interpreted as a click. As a fix, do not update the
dragged actor's position until the same threshold is passed.
https://bugzilla.gnome.org/show_bug.cgi?id=640494
The main overview group starts capturing events on button-press
events to implement swipe-scrolling. While reactive children of
the group which handle both button-press and button-release events
don't trigger swipe-scrolling, children that only rely on
button-release have stopped working - at least the primary/secondary
icons of the search entry are affected. While the capture handler
already checks the pointer movement between press and release to
determine whether the action should be considered a click rather
than a drag, it still blocks the release event from propagating.
Instead, only block release events for drag actions, but not for
clicks.
https://bugzilla.gnome.org/show_bug.cgi?id=640493
When aiming for the thumbnails with the mouse one might cross an
icon by accident which causes the thumbnail list to be closed, which is
frustrating.
Fix this by delaying the icon activation when the thumbnail list is
open.
https://bugzilla.gnome.org/show_bug.cgi?id=636650
With general support for swipe-scrolling in the overview, there is
no reason to limit the behavior to workspaces. It is equally useful
for scrolling through the grid of available applications, so enable
swipe-scrolling for the app view.
https://bugzilla.gnome.org/show_bug.cgi?id=635034
The workspaces view allows to drag the active workspace to swipe-scroll
to the next or previous workspace. While this behavior can come in handy
in general, there are good reasons to move the functionality to the
overview:
- Finding a spot on a workspace to start a drag can be hard,
especially when the workspace contains a single window
- With the new layout, workspaces have no visible border, making
it hard to predict where a drag can be initiated
- The same behavior is equally useful for other elements
So add setScrollAdjustment() to the overview, which allows setting
an adjustment controlled with swipe-scrolling (either horizontally
or vertically); only a single adjustment can be controlled at a
time. A swipe-scroll can be initiated on any part of the background that
is not occupied by a reactive actor. For cases where further control
is needed, 'swipe-scroll-start' and 'swipe-scroll-end' signals are
emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=635034
Introduce a generic framework for on/off indicators that are shown
in the panel, next to the system status area, and use it for
showing the status of modifier keys.
https://bugzilla.gnome.org/show_bug.cgi?id=600771
Drag monitor functions are supposed to return a value, but
_onDragMotion() does not always do so. Add the missing return
value and remove unnecessary else.
As Gdk.Device.get_state() does not work properly from Javascript,
we used to block it in the environment. The method now has been
annotated with (skip), causing shell to crash on startup as only
existing methods may be blocked.
Just remove the block in question, as the annotation prevents the
use of that method anyway.
Currently we reset the timeout on every mouse movement which means
the user has to keep the mouse at the exact same position for 1.25
seconds.
Be more tolerant and allow the user to move the mouse over the
window without reseting the timeout, which should make activating
windows easier.
https://bugzilla.gnome.org/show_bug.cgi?id=638896
Commit a65a0f03d4 changed the literal RegExp to a string-based
RegExp(). As backslashes are treated specially inside strings,
translating an expression as /\s/ to '\s' results in a faulty
regex of /s/, so escape backslashes where necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=639914
This fixes the problem of chat notifications collapsing and then expanding
again when receiving multiple messages in the expanded new notification.
https://bugzilla.gnome.org/show_bug.cgi?id=629557
g_settings_schema_new() aborts if the requested schema is not found,
so the previous approach of handling the case of unstable nautilus
not being installed did not work.
Instead, remove the use of the setting altogether - the original intent
was to not have separate items for Desktop and Home in the places
section if the nautilus key was set. As the section has been removed
anyway, the impact of always adding the desktop folder is minimal
(e.g. searching for "desktop" will match the desktop folder even
if it's set to the home folder).
The latest development version of nautilus has been ported to
GSettings, which we now use as well for the desktop-is-home-dir
preference. Obviously, the required schema is only available if
a recent enough nautilus version is installed. Instead of adding
yet another module to the moduleset, catch the exception and
ignore the preference in case the schema is not available.
https://bugzilla.gnome.org/show_bug.cgi?id=639689
'Places' follows the nautilus preference of whether the Desktop
should be a separate directory or the home folder should be used.
Nautilus has been ported to GSettings a while ago, so follow suit.
https://bugzilla.gnome.org/show_bug.cgi?id=639689
GenericDisplay used to provide a common base class for places and
recent items, none of which exists anymore. As of current mockups,
display items in "Finding and Reminding" should be based on
BaseIcon / IconGrid instead.
Currently recent items only show up in search results. It is planned
to bring them back in the context of "Finding and Reminding", but
the UI in the corresponding mockups differs significantly from the
removed UI, so that it doesn't seem useful to keep it around.
Layout items in the menu overwrite PopupBaseMenuItem.activate(),
so the menu stays open when selecting a layout from the menu.
Chain up to the parent class' method to make the items behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=639474
When an error message is displayed the run dialog
pops to the new height instantly. It needs a
a transition.
This commit makes the dialog quickly grow to its
ultimate height, making room for the error message,
before showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
Now that we have a modalDialog base class in gnome-shell,
it makes sense to use it for the run dialog.
Note, the run dialog doesn't currently have buttons, so
it isn't exercising all the API of the base class.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
This is a base class to make it easier to
gain a consistent look for system modal dialogs.
It handles creating a darkened backdrop behind the dialog, setting
up buttons in the dialog, keynav, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
Right now popModal() passes global.get_current_time() for
its begin_modal() call. global.get_current_time() is the
timestamp of the last gdk or clutter event processed by the
shell's mutter process. These values could potentially be
be too stale to use if pushModal() were to get called in
response to an event by another process.
This commit changes pushModal() to have an optional timestamp
argument, which can be used to associate the call with the
event that initiated it.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
Layout items in the menu overwrite PopupBaseMenuItem.activate(),
so the menu stays open when selecting a layout from the menu.
Chain up to the parent class' method to make the items behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=639474
AppWellIcon is used both in the dash and view selector. As the dash
requires manual sizing, it is not possible to set the icon size used
in the view selector in the CSS, but icons will use the default size
(unless set manually as in the dash).
Expose the params parameter of BaseIcon and enable manual resizing
only for AppWellIcons in the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=639428
Since we have to use pkill, kludgily, for the right combination of
portability and featurefulness, put the code in one place rather than
duplicating it everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Add Util.spawn, Util.spawnCommandLine, and Util.spawnDesktop for
spawning a command/argv/.desktop file in the background, automatically
handling errors via MessageTray.SystemNotificationSource(), and
Util.trySpawn, Util.trySpawnCommandLine, and Utils.trySpawnDesktop
that don't do automatic error handling (but do at least clean up the
error message in the exception a bit).
Update various other bits of code around the shell to use the new
methods.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Rename imports.misc.utils to imports.misc.util for more consistency
(eg, with shell-util).
Also, use the string-based RegExp() constructor rather than a RegExp
literal, since the literal is extremely difficult to parse correctly,
and confuses emacs and probably other editors and thus messes up
autoindentation, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Require that all extensions have a "shell-version" property in their
metadata, which is an array of supported Shell versions.
Extensions can target a specific version triple or an entire stable
version.
Optionally, they can also require a specific GJS version, to ensure
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Add an entry in config.js.in for PACKAGE_VERSION and GJS_VERSION,
to be used by the notification daemon and in the future by the
extension system.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Add an indicator for the current keyboard layout, based on
libgnomekbd. The indicator is shown when more than one group
is loaded in X and it is not disabled in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=600771
Although certain keys (like Ctrl-Alt-Tab and Alt-F2) should work in
the overview, we generally don't want them to work from inside each
others grabs. In particular, typing Left or Right from inside
Ctrl-Alt-Tab should navigate among focus groups, not switch
workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=636971
Also, change _globalKeyPressHandler to handle KEY_PRESS, not
KEY_RELEASE, for consistency with other code (and so that the
combination of an Alt-F1 press and release doesn't first enter the
overview and then immediately exit it).
https://bugzilla.gnome.org/show_bug.cgi?id=636371
Actors in clutter are supposed to be re-allocated with
Clutter.AllocationFlags.ABSOLUTE_ORIGIN_CHANGED if they move relative
to the screen, even if they don't move relative to their parent.
Currently this does not work correctly for actors inside containers
with non-northwest gravity. This is probably a fixable bug, but
gravity has messed up other things in the past too, so let's just not
use it.
This change ensures that summary trayicons are re-allocated when the
summary animates, and is part of the fix for
https://bugzilla.gnome.org/show_bug.cgi?id=635695
This should be useful for theme authors who want to quickly reload
the theme without restarting the whole shell.
Signed-off-by: Federico Mena Quintero <federico@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=630428
When doing keyboard navigation, ignore menus whose sourceActor is
hidden.
This is needed to hide status icons, as otherwise the menu would
appear despite having no icon.
https://bugzilla.gnome.org/show_bug.cgi?id=638306
When BluetoothApplet::show-full-menu property is notified (when you
switch from a disabled adapter / no adapter to an active one), we
would show all the menu, including the device separator, without
checking if any devices actually existed.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
If the switcher is destroyed without ever being fully shown (either
because it couldn't get a keyboard grab, or just because there are no
apps to display), destroy it immediately rather than tweening it
towards destruction, since its contents haven't been built yet and
_allocate() will throw errors if it runs.
The gnome-panel allows the user to hover over a tasklist entry
while draging to activate a minimized or obscured window and drop onto it.
Implement a similar behaviour by allowing draging to the activities button or
the hotcorner (and thus opening the overview), which allows the user to
activate any window (even on different workspaces) as a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=601731
When the user is doing a drag-and-drop, we want to temporarily show the
stage to allow them to drag to a different window. But we're not "really"
in the overview, and getting a grab would conflict with the X client doing
the drag and drop.
So add a showTemporarily()/hideTemporarily() pair of methods that show
the overview without grabbing.
This adds a lot more possibilities for asynchronous race conditions, so
rework the code to be more robust against multiple calls to show*()
and hide*(). The interpretation is now that all calls to show*() and
hide*() affect the state, but if we have conflicting calls to show and
hide we wait until the current animation is finished before correcting
to the right visual state.
https://bugzilla.gnome.org/show_bug.cgi?id=601731
This fixes warnings like:
(mutter:12238): Clutter-WARNING **: The actor 'calendarPopup' is
currently inside an allocation cycle; calling clutter_actor_queue_relayout()
is not recommended
https://bugzilla.gnome.org/show_bug.cgi?id=637829
A key for 12hr/24hr clock format has been added to gsettings-desktop-schemas,
so use that instead of the one from the shell clock schema.
As the setting can be controlled from the Date and Time panel of
gnome-control-center now, drop the temporary preference dialog
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=633200
Gdk.Display.get_device_state() was removed in favor of a
non-GdkModifierType returning Gdk.Device.get_position(). But block
Gdk.Device.get_state() which does return a GdkModifierType mask.
https://bugzilla.gnome.org/show_bug.cgi?id=638158
When receiving a "devices-changed" signal from BluetoothApplet,
check if some device item corresponds to an existing one, destroy
the remaining and add the new ones.
With this patch, signal emission when no device actually changed
(which happen due to bluetoothd creating temporary devices) result
in a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
Kill one separator by merging all global actions items at the end
of the menu, which ends up divided in three sections: status,
devices and actions.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
This makes it consistent with other parts of the UI and will let the
a11y code use the rule "has_style_pseudo_class('selected') =>
ATK_STATE_SELECTED"
https://bugzilla.gnome.org/show_bug.cgi?id=637830
Don't do the "slide" effect when moving from one menu to another; only
do it when opening the first menu, or closing a menu without opening
another one.
https://bugzilla.gnome.org/show_bug.cgi?id=634755
Give the clock's right-click menu its own PopupMenuManager so that if
you drop down another menu and then mouseover the clock it doesn't
pop up the right-click menu.
https://bugzilla.gnome.org/show_bug.cgi?id=634755
Fix the panel menus to avoid unnecessarily bouncing out of modal (bug
634194) and to do a better job of keeping the keyboard focus in the
right place
https://bugzilla.gnome.org/show_bug.cgi?id=618885
Until recently, the clutter keyboard focus was almost always kept on
the stage, and bits of code that wanted to do stuff with the keyboard
would just watch for key-press-events on the stage. In several places,
the code wasn't even bothering to ensure that the focus was on the
stage, which caused problems with other actors that explicitly grabbed
focus.
A previous fix for this (f21403fd) was to always reset the focus to
the stage after calling pushModal(), but a better fix is to just
actually make use of the keyboard focus everywhere rather than having
everyone try to read events off the stage.
Now pushModal(actor) also does actor.grab_key_focus(), and various
bits of code have been changed to read key events off their own
toplevels rather than off the stage, meaning there's no chance of them
accidentally getting someone else's events.
https://bugzilla.gnome.org/show_bug.cgi?id=618885
Instead of showing submenus on the left side, make PopupSubMenuMenuItem
act like an expander. The sub menu is toggled on click, opened on
right/enter/space on the parent item, closed on left on any item
or when closing the parent menu.
https://bugzilla.gnome.org/show_bug.cgi?id=633476
As all children were considered for the grid's layout, hidden items showed up as
empty space. Instead, exclude hidden children from the layout, so that the grid is
only made up of visible items.
https://bugzilla.gnome.org/show_bug.cgi?id=631537
According to the designers, system notifications should be transient;
so now that transient notifications are supported properly, make use
of it instead of using a timeout to remove the associated source.
Transient notifications are removed after being shown. If the summary
is being shown while they appear, they are represented in it by a new
source icon.
We always create a new source for new transient notifications to
ensure that they don't replace the latest persistent notification
associated with the source. Because we generally don't want any
new or resident notifications to be replaced by others, associating
multiple notifications with a source is the next thing we will
implement.
https://bugzilla.gnome.org/show_bug.cgi?id=633412
Resident notifications don't get removed when they are clicked or
one of their actions is invoked, and are only removed when the app
that created them requests them to be removed or sends another
notification.
Remove the source when a notification associated with it is removed.
Except if the source is a tray icon.
Make sure that we pop down the tray when a notification is clicked
or one of the actions of a non-resident notification is selected.
Based on the initial patch by Jonathan Matthew.
https://bugzilla.gnome.org/show_bug.cgi?id=633412
Given that the grid view is gone there is no point in animating the
window previews on all workspaces anymore so just do it for the current
one avoid taking a slow down caused by animating windows on other workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=637353
Mixing submenu menuitems and toggle menuitems results in poor layout.
The fix is to right-align the submenu arrows. Since we already need to
right-align the battery percentages as well, add alignment support to
PopupBaseMenuItem.addActor(), and update stuff for that.
Also remove the "column" param from addActor() since it hadn't
actually been implemented correctly before.
https://bugzilla.gnome.org/show_bug.cgi?id=633476
Since we are keeping a current pointer position anyways, we
don't have to continually call global.get_pointer() which is
a round trip to the magnifier; make ZoomRegion simply fetch
a current position stored in the Magnifier object.
https://bugzilla.gnome.org/show_bug.cgi?id=633553
Change the proportional algorithm so stop moving the zoom region
when cursor is in a "padding region" at the edge of the screen.
(The padding region is a 10th of the screen at 2x zoom, and smaller
for higher zooms.)
Based on earlier versions from Jon McCann and Florian Muellner.
https://bugzilla.gnome.org/show_bug.cgi?id=629950
This basic point of this change is to avoid always creating a
hidden Clutter.Clone actor for the default present-but-not-active
zoom region. The position of the viewport and region of interest
are now stored in member variables, and the actors are only created
and updated when the region is active.
Other significant changes:
* Unused public functions are removed or made private
* The mouse tracking position is immediately updated when options
like the zoom are changed, not just on the next mouse motion.
* ZoomRegion.setROI() now updates the zoom, not just the position;
a FIXME is added to the D-Bus interface for a place where the
D-Bus interface contains duplicate possibly conflicting information
* Lens-mode is now only effectively off when the magnifier is
fullscreen, instead of actually modifying the member variable;
this makes things work properly when changing out of full-screen
mode.
* When the clamping to screen edges is turned on, we now immediately
clamp.
* The handling of setting the position to fullscreen as compared
to just setting the viewport to fullscreen is untangled.
https://bugzilla.gnome.org/show_bug.cgi?id=633582
The magnifier should be enabled/disabled via the appropriate
GSettings key - otherwise the setting gets out of sync with the
actual state of the magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=636151
The popup menus of application icons in both the dash and the app view
are positioned on the right of the icon. In the case of the dash this
results in the menu being displayed off-screen in RTL locales, so move it
to the opposite side instead.
https://bugzilla.gnome.org/show_bug.cgi?id=635645
In some circumstances, a boxpointer would draw itself with the arrow
partially overlapping the rounded corner, causing things to not line
up correctly. Don't do that.
And while we're at it, don't draw the pointer very very close to the
corner either, since it looks odd if the corner flows directly into
the arrow.
https://bugzilla.gnome.org/show_bug.cgi?id=635393
Show a positional indicator where a new favorite will be added and
make the favorites re-orderable. Also allow the removal of favorites
using drag-and-drop according to the mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
Delegate the emission of the window-drag-begin/window-drag-end
signals to overview functions, as done already for other items.
This will enable objects to react to those signals without having
access to the workspace objects / the workspaces view.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
Current mockups display all search results as icons as used by
application results, so change the default result display to use
iconGrid/BaseIcon. Remove the custom application results display,
as it is no longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
Add the view selector and adjust the positioning of elements in the
overview. Unlike the old dash, the view selector is made public to
indicate that extensions may add additional views or search providers.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
As workspaces will appear as a particular view in the view selector,
merge WorkspacesControls and WorkspacesManager to control workspaces
and related controls, so that a single actor can be added to the
selector instead of positioning the elements from the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The new layout does no longer support view switching, so merge
GenericWorkspacesView and SingleView, and remove MosaicView.
Also rename or remove workspace properties and functions which
are now unused.
The grid will have a comeback with the new DND behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
Being no longer an independent menu pane, both the toggle() and
close() functions are no longer needed, and the view's structure
can be simplified a bit.
Also update the style to fit into the view selector.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The view selector should only deal with view switching, so move the
logic to deal with search (find-as-you-type, cancelling a search,
navigating/activating results) into the SearchTab.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The view selector is a tabbed interface with a search entry. Starting
a search switches focus to the results' tab, ending a search moves the
focus back to the previously selected tab. Activating a normal tab
while a search is active cancels the search.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
With the new layout, search results will be displayed in an independent
view like window previews, applications and possible future additions;
it does not make much sense keeping it with the switching logic, so move
the code to its own file.
Also remove the dash-prefix from the relevant style classes.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The new dash implementation is a single-column vertical sidebar,
whose items are scaled dynamically to fit the available height.
If the height is still exceeded after scaling down to a minimum
item size, excess items are cut off.
The now unused old dash implementation is renamed to OldDash, as
its code will be used as a base for the new view selector element.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
As the button to add workspaces will move to the same position as
the new workspace drop area in drag mode, the latter is redundant
and can be removed.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
Overlaying inactive workspaces with a gradient to fade out the actors
does no longer work when re-using the normal desktop background. If
we keep the current DND behavior, we probably want to implement a real
fade effect - for now, just remove the visually disruptive shadows.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
While scaling the desktop background with the window previews represents
workspaces quite intuitively, the approach is not without problems.
As window previews in the overview behave quite differently to "real"
windows, the representation of workspaces as miniature versions of
"real" workspaces is flawed. The scaling also makes the transitions
to and from the overview much more visually expensive, without adding
much benefit.
Leaving the background in place provides more visual stability to the
transitions and emphasizes the distinctive behavior of elements in the
overview.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The layout of recent mockups occupies the space previously reserved
for the info bar with the view selector. As the bar's purpose is
mainly to provide the user with feedback, it makes sense to use the
existing message tray facility instead of moving the bar elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
The scrollbar is the main culprit for cluttered controls in the
linear view - all its functionality is already provided by the
workspace indicators, so it is save to remove the scrollbar in
order to clean up the interface.
https://bugzilla.gnome.org/show_bug.cgi?id=634948
When the last message is older than SCROLLBACK_IMMEDIATE_TIME (1
minutes), show a timestamp in the middle, indicating the time it
was sent.
Use the same style for presence changes, but show them on the left.
https://bugzilla.gnome.org/show_bug.cgi?id=617228
NotificationDaemon-based notifications have markup in the banner/body,
but Telepathy-based notifications don't. (Eg, an XMPP message
containing "<b>foo</b>" should show up angle brackets and all, not as
bold.) Fix MessageTray.Notification to allow explicitly specifying
where there should and shouldn't be markup, and use that
appropriately.
https://bugzilla.gnome.org/show_bug.cgi?id=610219
According to the HIG we should use ellipsis when:
"Label the menu item with a trailing ellipsis ("...") only if the command requires further
input from the user before it can be performed. Do not add an ellipsis to items that only
present a confirmation dialog (such as Delete), or that do not require further input
(such as Properties, Preferences or About)"
So adjust the use of ellipsis to match that.
Pointed out by Michael Monreal.
We updated the normal devices part, but we forgot the part about
the primary device (possibly because it is not reported as such
in case it is fully charged). Update that as well, to avoid showing
weird GIcon serializations.
https://bugzilla.gnome.org/show_bug.cgi?id=635288
Reimplement UI without any indication of percentage or mutedness,
and whitout switches. The only interaction point is slider, but
it still supports mute changing for applications that track it,
and will react appropriately to external changes.
https://bugzilla.gnome.org/show_bug.cgi?id=634329
If the drag actor is destroyed as part of a drag target accepting it,
we were not calling ungrabEvents, meaning the mouse/keyboard remained
grabbed until you clicked somewhere to cancel it.
This fixes that without trying to improve the extremely confusing
control flow...
https://bugzilla.gnome.org/show_bug.cgi?id=635278
Previously, when snapping back a drag actor, we moved it back to its
original stage-relative position and scale. This worked fine if its
parent was still in the same place it was when the drag started, but
failed in cases like the linear workspace layout window drag-and-drop,
where dragging a window would "zoom out" its parent workspace, causing
the snapback to send it to the wrong place.
Fix this by instead snapping the actor back to "where the actor would
have been right now if it were still at its original scale and
position within its original parent actor" rather than "where it was
before the drag started"
https://bugzilla.gnome.org/show_bug.cgi?id=635272
Instead of hiding the drag actor temporarily to determine the actor
beneath it, make it invisible to picks while dragging using the new
shell_util_set_hidden_from_pick().
https://bugzilla.gnome.org/show_bug.cgi?id=634560
The code to draw the root background has now been moved into Mutter,
with added smarts to not draw obscured portions. Remove the old
version of the code and clone the Mutter background actor to draw
the background in the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=634836
Add a "gicon" property so that a GIcon can be used instead of an
icon name, while still getting icon recoloring from the theme.
Also include a compatibility wrapper in libshell until GJS has
support for interface static methods.
https://bugzilla.gnome.org/show_bug.cgi?id=622451
gnome-volume-control-applet was renamed to gnome-sound-applet when
moved to the control-center module, so we need to check for both names
when identifying the legacy status icon.
It was decided at GNOME Summit that we would remove the invisible
setting until we have a better story for how it works with chat
and other sharing/messaging applications. We'd also need to
figure out how it relates to busy.
The action is far less common than powering off. It is mostly
used for performing system updates so the update tool should
offer the option directly. Also, currently the Shut Down option
dialog offers Restart anyway. We would like to keep the number
of entries in this menu as limited (close to 7) as we can.
Switch from St.TextureCache.load_named_icon() to using St.Icon for named
icons. Along with the advantage of getting colorization right for symbolic
icons, this allows moving some icon sizes into the CSS.
In the CSS, the system status icon size is changed to be 1em (=16px for the
default font size), at the request of the artists. See bug 613448.
https://bugzilla.gnome.org/show_bug.cgi?id=633865
gnome-settings-daemon has moved to GSettings for most settings, we
should adapt as well. The only remaining GConf key is for metacity
(visual bell).
https://bugzilla.gnome.org/show_bug.cgi?id=634693
Waiting for LookingGlass to close after calling St.set_slow_down_factor()
is annoying so divide the time for opening and closing by the slow-down
factor.
As popup menus now take focus for keyboard navigation, no application
is focused when activating the menu. Use the target application instead,
which keeps track of the application currently associated with the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=634103
Action names sometimes unintentionally overlap with icon names, so
we should only create icon buttons if the message tray source requests
it. For the notification daemon, this is done by setting the
'action-icons' hint on the notification.
The previous notification server capability used to advertise this
feature, "x-gnome-icon-buttons", has been removed in favour of the
new capability described in the notification spec, "action-icons".
https://bugzilla.gnome.org/show_bug.cgi?id=624584
We shouldn't hide the tray as quickly if the user might have left it
unintentionally, such as when moving the mouse over to a different tray item or
using the scroll bar in the chat notification.
https://bugzilla.gnome.org/show_bug.cgi?id=630767
This way the new modal level is independent of whatever may have been
happening before. Fixes a problem with status menus becoming active
again from inside the app switcher, etc.
Tray icons replaced by a shell version are automatically filtered
and never make to the tray container, but when removed by the client
we were still trying to remove them from the tray, causing a warning.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
Each menu is a focus manager group, but there is also some explicit
focus handling between non-hierarchically-related widgets. Eg, to move
between menus, or from a menubutton into its menu.
https://bugzilla.gnome.org/show_bug.cgi?id=621671
The constructor was setting this.active to reflect the switch state,
which is wrong; this.active indicates whether or not the item is
highlighted.
https://bugzilla.gnome.org/show_bug.cgi?id=621671
Adding a "PopupMenuRadioButtonItem" wouldn't work well, because we'll
need radio-button indicators on multiple different styles of menu
item. Also, the current design draws the indicator in the menu item's
padding, so it's sort of special anyway. So just add support at the
BaseMenuItem level.
Also, redo the menu/menuitem padding so that all the horizontal
padding is in the menu item, or else the indicator dot will show up in
the wrong spot.
https://bugzilla.gnome.org/show_bug.cgi?id=631193
When there are menu items with right-aligned items, all the
right-aligned items should appear to the right of all the left-aligned
items.
Clutter doesn't have an equivalent of GtkSizeGroup, so hack something up
using ShellGenericContainer and some javascript.
https://bugzilla.gnome.org/show_bug.cgi?id=631193
Rename a few, and add Suspend and Restart, although currently they do
the same thing as Shut Down (ie, they bring up a dialog that lets you
do any of those three). This will be fixed later when we have the
in-shell modal dialogs for these features.
https://bugzilla.gnome.org/show_bug.cgi?id=631193
In the new mockups, the user menu icons are on the right, not the
left.
Also, get rid of the idea of optional icons; the design doesn't have
icons on those items, and there probably aren't going to be symbolic
versions of some of those icons anyway. So if the caller specifies
PopupImageMenuItem, then always show an icon, and just use regular
PopupMenuItems for the items that don't have icons in the current
design.
https://bugzilla.gnome.org/show_bug.cgi?id=631193
MutterWindow and MutterPlugin have been renamed to MetaWindowActor
and MetaPlugin, mutter_plugin_list_windows() to
meta_plugin_list_window_actors(). Adapt to those changes.
https://bugzilla.gnome.org/show_bug.cgi?id=632500
_volumeChanged should not update the icon if the sink is muted.
Fixes the case when shell is started with a muted sink (_mutedChanged
is called before _volumeChanged).
https://bugzilla.gnome.org/show_bug.cgi?id=632868
Although within St itself there are situations where the semantics of
these functions (return TRUE or FALSE and return the actual value in
an out parameter) is useful, it's mostly just annoying at the
application level, where you generally know that the CSS property is
going to specified, and there is no especially sane fallback if it's
not.
So rename the current methods to lookup_color, lookup_double, and
lookup_length, and add new get_color, get_double, and get_length
methods that don't take an "inherit" parameter, and return their
values directly. (Well, except for get_color, due to the lack of (out
caller-allocates) in gjs.)
And update the code to use either the old or new methods as appropriate.
https://bugzilla.gnome.org/show_bug.cgi?id=632590
Add volume control indicator which uses API from gnome-volume-control
to interact with PulseAudio and shows both input and output volumes.
Also adds a small wrapper around libcanberra in ShellGlobal, used by the
volume indicator to provide auditive feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=629455
Right now if XDG_DATA_DIRS is set to have duplicate entries,
then the extension system will try to load all extensions
more than once.
This commit prevents an extension from getting repeatedly
loaded by checking if its uuid is already registered.
https://bugzilla.gnome.org/show_bug.cgi?id=632477
Tray icons control their own lifespan; they're not supposed to
disappear when you dismiss their notifications like non-trayicon
notification sources do.
https://bugzilla.gnome.org/show_bug.cgi?id=631042
Previously, when you clicked on a notification, it would call
this.source.clicked(), which would emit a 'clicked' signal on the
source, and then various other stuff would happen from there. This
used to make a little bit of sense, when clicking on a notification
was supposed to do the same thing as clicking on its source, but makes
less sense now, when clicking on the source itself *doesn't* call
source.clicked()...
Change it so that when you click on a notification, the notification
emits 'clicked' itself, and the source notices that and calls its
notificationClicked() method, and the various source subclasses do
what they need to do with that, and Source no longer has a clicked
method/signal.
https://bugzilla.gnome.org/show_bug.cgi?id=631042
Redo the way that the summary item expand/collapse animation works so
that the items all resize in unison so that when moving from one to
another, the summary area as a whole stays a constant width rather
than wobbling slightly.
(Also rename all references to the "minimum" summary item title width,
since it's not a minimum, it's just the width.)
https://bugzilla.gnome.org/show_bug.cgi?id=630546
This fixes the bug when the body would be missing from the expanded notification
that has a short body that used to fit in the one-line banner and is expandable
because it has action buttons.
We always want to add the banner to the body of an expandable notification,
unless the notification has custom content. We used to only do that when
creating this._scrollArea for the content. We should also do that when creating
this._actionArea .
https://bugzilla.gnome.org/show_bug.cgi?id=631566
It's possible that an item that was added to the summary got removed before
we had a chance to show the summary because the user has interacted with
the notification (e.g. clicked on an application ready notification). We should
not be showing the summary with an unchanged set of items in this case.
However, it is possible that multiple items were added to the summary before
we had a chance to show the summary, and only some of them got removed. In view
of this scenario, we can't just use a boolean flag to indicate if the summary
needs to be shown, but have to maintain an array of new summary items instead.
https://bugzilla.gnome.org/show_bug.cgi?id=630939
Environment.init() uses Shell.Global, which is not accessible outside
the mutter process; allowing to run the function when window.global is
undefined fixes the environment for tests.
https://bugzilla.gnome.org/show_bug.cgi?id=631091
Introduce Cairo-drawn sliders to be used in PopupMenus (for example for
volume). They are stylable to some extent (colors, border width, slider
height) and have the standard behaviour of a slider, except they are
completely modal (once you start dragging, all events are intercepted by
the slider, which thus is kept active and highlighted at all times).
They show numeric values between 0 and 1 (scaling must be performed outside)
and emit value-changed on button release, but no activate, keeping the
menu open.
https://bugzilla.gnome.org/show_bug.cgi?id=625029
PopupMenuManager now connects to the destroy signal of PopupMenu, so
that destroying a PopupMenu is now enough for removing it from the
relevant manager. Useful if menu come and go on-the-fly (like in
app views or sidebars).
https://bugzilla.gnome.org/show_bug.cgi?id=630914
The semantics of the first argument changed from literal -> regexp
if the 'g' option was specified. To remove ambiguity, stop using
the spidermonkey extension and create a standard RegExp object.
https://bugzilla.gnome.org/show_bug.cgi?id=630539
Having the summary pop up automatically after a source icon has been
removed is pretty useless ("Hey, there was something interesting going
on, but you missed it and it's gone now, kthxbye").
https://bugzilla.gnome.org/show_bug.cgi?id=630939
Icons can be loaded as St.Icon.SYMBOLIC, FULLCOLOR, APPLICATION or
DOCUMENT. The first will look for a symbolic equivalent, the second
looks for a full-color version (and does fallback, eg, from
"drive-harddisk-usb" to "drive-harddisk"). APPLICATION and DOCUMENT do
full-color icons without fallback (as specified by the icon spec).
And update various callers to use the right flags.
Based on a patch from Matt Novenstern.
https://bugzilla.gnome.org/show_bug.cgi?id=621311
Both current design and new mockups use square icons. Currently this
is implemented by setting a fixed width and height in the CSS, which
does not work for the growing/shrinking items in the new sidebar.
By moving the assumption of square items into the code, the size will
adjust according to icon size, spacing, padding and font size if not
explicitly overwritten in the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=625887
The current design features a sidebar where the icon size shrinks
automatically to fit more items. Add a setSizeManually parameter
to BaseIcon, which disables sizes read from CSS and allows to use
BaseIcon.setIconSize() to support this.
https://bugzilla.gnome.org/show_bug.cgi?id=625887
All mockups now use a representation for documents/places similar to
the one used for applications. Rename AppIcon to BaseIcon and move its
code together with WellGrid out of appDisplay to stress their general
usefulness.
https://bugzilla.gnome.org/show_bug.cgi?id=625887
The actor emitted by ShellTrayManager is now ShellTrayIcon, a subclass
of ShellGtkEmbed which has several properties on it which are (or will
soon be) useful to the shell.
Part of the rearranging to use ShellTrayIcon means that we now show
the ShellEmbeddedWindow before creating its ShellGtkEmbed, which
requires a few modifications to ShellEmbeddedWindow (notably, telling
it at construct time what stage it will be drawn on, since it needs to
know that before it has a ShellGtkEmbed now).
https://bugzilla.gnome.org/show_bug.cgi?id=608869
Resolve a notification's ShellApp before posting the notification, so
that notification sources now always have an app associated (assuming
they came from an app as opposed to the command line). Index sources
by PID rather than by appName (so that, eg, multiple calls to
notify-send now show up as separate sources).
For Sources that have an associated app, use the app's icon for the
source, rather than tracking the notification icon.
This change also lets us get rid of appNameMap, since we can just use
shell_app_get_name() now.
https://bugzilla.gnome.org/show_bug.cgi?id=629090
Previously we were hiding the banner label if the title was too long,
but this causes queue_relayout() warnings. Instead, just set its
opacity to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=629308
Introduce the Universal Access status indicator as designed, modeled
after the similar UI provided by g-s-d. This indicator allows the user
to change rapidly the keyboard and mouse behaviour (sticky keys, slow
keys, bounce keys, mouse keys), as well as the enabled ATs (magnifier,
screen reader, screen keyboard) and the HighContrast Gtk theme.
https://bugzilla.gnome.org/show_bug.cgi?id=624916
Adds class PopupSubMenuMenuItem, which is an item holding a submenu,
that is opened when the corresponding item is active, and is keyboard
and mouse navigable like its Gtk counterpart.
https://bugzilla.gnome.org/show_bug.cgi?id=623498
This patch allows the icon in PopupImageMenuItems to be changed at
any time, while preserving the item and all other properties (style,
signals) attached and without rebuilding the whole menu. This is useful
for images reflecting a dynamic status (e.g. cellular strength
indicator or battery level)
https://bugzilla.gnome.org/show_bug.cgi?id=623652
Modal dialogs slide back into the titlebar of the parent window when destroyed.
This looks weird if the parent window itself has been destroyed, so cancel the
effect in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=629560
Extend WellGrid with an optional rowLimit parameter and an accessor
function for the grid's items, then use it to replace the custom
container used to display the application search results.
Also adjust the spacing of the search results slightly to make it
consistent with the app well.
https://bugzilla.gnome.org/show_bug.cgi?id=622446
The keyReleaseEvent handler does not take into account that a
user might release Alt while still holding shift
(the keycode becomes Meta_L/R in that case).
The result is that the switcher stays open which is unexpected.
https://bugzilla.gnome.org/show_bug.cgi?id=629368
Override the new mutter preference /apps/mutter/general/attach_modal_dialogs
to attach modal dialogs to their parent window. Animate the modal dialogs
expanding from the top of the parent window. Slowly dim the parent window
after the dialog comes up.
https://bugzilla.gnome.org/show_bug.cgi?id=612726
This patch ensures the following notifications behavior:
- Urgent notifications that have long title or banner text are auto-expanded
correctly.
- Single-line notifications that have _expandNotification() called (e.g.
because the user mouses over to them), are treated as expanded, which means
they get fully expanded if they are updated with more content and the user
can escape them.
- The position of expanded notifications is updated when they are updated.
- Notification banner is shown again on the first line if it can fully fit
there after a notification is updated, even if it was previously hidden
because the notification was expanded and the old banner did not fully fit.
- New notifications are immediately hidden if the user mouses away from them.
- If a new notification is updated while it is shown, we extend the time it
will be shown.
- If a new notification is updated while it is hiding, we stop hiding it and
show it again.
- If a summary notification is updated while it is hiding, we let it finish
hiding and show a new notification with the updated information.
Implementation details:
- Single-line notifications now have 4px bottom padding instead of 8px, which
means that their height matches the tray height, they are fully shown in the
banner mode, and don't pop out by 4px when the notification is expanded.
- Notification keeps a flag that indicates whether it is expanded, updates
its expanded look when it is updated, and emits an 'expanded' signal
indicating that its layout has possibly changed. The message tray connects
to this 'expanded' signal when it is showing a notification in the expanded
state and updates the position of the notification accordingly when this
signal is received so that the notification is fully shown. This is better
than connecting to 'notify::height' signal on the notification bin, since
it results in fewer callbacks.
https://bugzilla.gnome.org/show_bug.cgi?id=617209
The Shell is the only user of the magnifier, so there's no
reason to keep using GConf for its settings. Since it's a
session-wide tool, use a distinct schema,
org.gnome.accessibility.magnifier, stored in
/desktop/gnome/accessibility/magnifier just like before.
Put these settings in a separate schema file for clarity.
Old enums in GConf were stored as integers, we now use the
facilities provided by GSettings to save them as strings,
and convert them to integers automatically thanks to the
mapping stored in the schemas. Remove hard-coded default values,
which we can get from the schemas.
https://bugzilla.gnome.org/show_bug.cgi?id=622414
Return a DND.DragMotionResult constant from delegate _handleDragMotion
methods as well as the existing return value from the drag monitor method dragMotion.
https://bugzilla.gnome.org/show_bug.cgi?id=607821
Expanding notifications automatically just because they popped up where
the pointer is positioned distracts the user. It can also lead to a behavior
that is surprising to the user by, for example, making the user's input
switch to the notification's text entry box.
It is possible to expand a notification that popped up over the pointer
by mousing away from it and then mousing back in immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=617209
We used to keep long titles ellipsized when a notification was expanded,
which was a bug. We now show them fully by line wrapping them.
Based on the original patch from Steven Van Bael.
https://bugzilla.gnome.org/show_bug.cgi?id=623970
We used 'bannerBody' flag to differentiate the case when we move the banner to
the body when the notification is expanded from the one when we don't do that
and only use the custom content set for the notification, as is the case for
Telepathy notifications. We also always cleared the content of the notification
on update when bannerBody was set to true.
Flag named 'customContent' reflects the use case for it more clearly. The
comments that accompany it were also updated and improved.
We now always add the banner text as the first element in the expanded
notification unless 'customContent' flag is set to true.
If the 'body' parameter is specified, we use it in addition to the banner
text. The earlier version of the code had a bug that resulted in the 'body'
parameter not being set only in the case when the 'bannerBody' was set to
true and the banner text had newlines in it.
https://bugzilla.gnome.org/show_bug.cgi?id=623970
The banner should not be appearing briefly when we are hiding the notification.
For that, we should only restore the opacity of the banner in popInCompleted()
when we are done hiding the notification. We do need to restore the opacity
in case the notification is updated and is shown in the banner mode again.
The banner should not be appearing briefly when we are showing the notification
in the summary mode. For that, we should not use the animation time to fade out
the banner in popOut() for summary notifications.
These two problems were particularly visible when the ANIMATION_TIME was increased.
https://bugzilla.gnome.org/show_bug.cgi?id=623970
In Clutter 1.2, clutter_event_get_keysym() ignored the state of the
Shift key. In 1.4, it does not, so we have to adjust our comparisons
accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=627782
The old calculation did not take into account the icon and the spacing
between columns. This resulted in the notifications that had a slightly
longer title/banner combination than could actually fit not being expandable.
The new calculation is done in _bannerBoxAllocate() so
that we don't need to hardcode which other elements are present.
https://bugzilla.gnome.org/show_bug.cgi?id=627985
A Source needs exactly one summary icon (which in the case of a
trayicon-based source won't even be just an image), but possibly many
notification icons, which may vary for successive notifications
(particularly in the case of NotificationDaemon notifications). So
differentiate these cases in the API.
https://bugzilla.gnome.org/show_bug.cgi?id=627303
The tray itself does not actually need them, and to make status icon
sources work correctly the NotificationDaemon will need to be tracking
its sources by two separate IDs, so the existing system won't work.
Also remove MessageTray.removeSourceByApp(), which is
NotificationDaemon-specific, and implement the functionality in
notificationDaemon.js instead.
https://bugzilla.gnome.org/show_bug.cgi?id=627303
The current search system uses the OR operator to concatenate search
terms. While results which are matched multiple times sort before
other matches, it is almost guaranteed that adding an additional term
to the search increments the number of results, which is rather
surprising.
https://bugzilla.gnome.org/show_bug.cgi?id=610955
When calling Notification.update, reuse the previous _bannerBox and
related labels (only changing the label content and relayouting), so
that the opacity set on popOut is preserved. As a consequence, updating
an opened notification no longer shows (or flicker) the banner at the
top.
https://bugzilla.gnome.org/show_bug.cgi?id=625502
The start date is shifted by a week if the day number of the month's
first day is smaller than the week start's day number. Probably the
only real world examples are months starting on a Sunday with locales
using Monday as start of week.
https://bugzilla.gnome.org/show_bug.cgi?id=625756
It is not obvious that only the icon is clickable to activate the
default action - in fact, with the area being that tiny, many don't
even know that notifications can be clicked.
Just extend the clickable area to the whole notification.
https://bugzilla.gnome.org/show_bug.cgi?id=613932
Adds class PopupSwitchMenuItem, which is a two-state switch similar
to those in system status indicators mockups. Also adds class Switch,
which represents the switch itself, in case it is useful somewhere
else.
https://bugzilla.gnome.org/show_bug.cgi?id=621880
In addition to already grabbing focus in the summary notifications,
we also want to grab focus in the new notifications when the user
hovers over them and expands them.
The notifications that expand automatically will only get focus once
the user hovers over them. The notifications that don't expand will
never grab focus because they don't need it.
Make sure that we toggle the way we grab focus when switching between
the overview and the main mode. This is necessary because, unlike
summary notifications that pop down when the user moves between the two
modes, new notifications keep being shown as long as the user hovers
over them or until they time out.
https://bugzilla.gnome.org/show_bug.cgi?id=617224
Because clicking on the summary item to have it display its notification
is a more deliberate action than hovering, we can now grab focus in that
notification. This makes chat notifications in the summary more convenient
to use because you don't need to click on the text entry there.
We pop down the notification when the user clicks anywhere outside of it,
triggers the overview, or the run dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=617224
This ensures that the summary appears when we are showing a new
notification and switch to the overview at the same time.
Another effect of this patch is that the summary is shown if the
user moves the mouse to the bottom right corner while a notification
is being shown, which is ok.
This patch adds the method "removeMenu" to PopupMenuManager, to allow
for removal of menus after they're inserted. In order to do this, it
needs to store along with the menu all the relevant signal connections,
that are disconnected when the menu is removed.
Also adds a parameter "position" to "addMenu", so that menus can added
in arbitrary order (in particular to reintroduce those which were removed).
This patch is intended towards dynamic menu users, like extensions for
application lists, docks, sidebars showing recent documents or favourites,
as well as advanced system tray implementations.
https://bugzilla.gnome.org/show_bug.cgi?id=622730
In GSettings, a change notification is generated immediately from context of the _set() call.
In GConf, The "value_changed" signal is emitted whenever the server
notifies your client program that a value has changed in the database (100% NOT from context of the _set() call).
https://bugzilla.gnome.org/show_bug.cgi?id=624296
We need to only connect to 'action-invoked' on notification once
when the notification is created. We were accumulating callbacks
otherwise, which resulted, for example, in the Rhythmbox skipping
through multiple tracks when the 'Next' button was hit.
Always be sure to destroy the notification when its source is
destroyed, which is the case when an action is invoked.
Note that in the future, we might not want to destroy the source
for some notifications when an action is invoked. For example,
it makes sense to keep Rhythmbox in the tray while the music is
playing and allow the user to use the controls from the summary
notification too.
Solved by splitting the base class (PanelMenuButton) in a separate
module, ui.panelMenu, which is meant to hold also other reusable
button classes.
https://bugzilla.gnome.org/show_bug.cgi?id=621705
The spinner animation moving from left-to-right to indicate a starting
application changes its direction on reaching the end of the movement.
Instead, keep the spinner at the right of the app name until startup
has finished.
https://bugzilla.gnome.org/show_bug.cgi?id=623687
We should not be showing the cursor in the search entry in the overview
if the user's input will be appearing elsewhere, such as in the run dialog,
in the Looking Glass console, or in the notification's response field.
"text-align" allows setting the alignment of text, with respect to
other lines and allocated space, without requiring a reference to
the ClutterText (which is private for most widgets).
If not specified, all text is left-aligned.
https://bugzilla.gnome.org/show_bug.cgi?id=622447
Sometimes it is useful to print numbers in hex format - add the
appropriate specifier. Also support a minimum field width to
pad the formatted string with spaces (or zeros if the width is
prefixed with '0').
https://bugzilla.gnome.org/show_bug.cgi?id=622597
This is part of the design update for the message tray.
Source now takes an extra argument called 'title'.
All expanded message tray items are same width, which is determined by
the width of the item with the longest title, up to MAX_SOURCE_TITLE_WIDTH.
This is done so that items don't move around too much when one is expanded
and another one is collapsed.
https://bugzilla.gnome.org/show_bug.cgi?id=617224
While the contents of the left and right group in the panel are
flipped correctly, the groups themselves have to be swapped as
well. The location of the hot corner has to be corrected as well.
https://bugzilla.gnome.org/show_bug.cgi?id=622243
It has probably crossed the line to evil by a mile or so, but here
it is: a Tweener.slowDownFactor replacement used by all animations
without exception.
While at it, update Tweener to use the new setTimeScale() upstream
function instead of adjusting the timeline directly.
https://bugzilla.gnome.org/show_bug.cgi?id=622249
Use GSettings for all Shell configuration. GConf is kept to read
configuration from external programs (Metacity, Nautilus and Magnifier),
but ShellGConf is removed because it's mostly useless for the few calls
we still have. Also get rid of unused GConf code in ShellAppSystem.
A basic GConf schema is still used to override Metacity defaults and
configure Magnifier in a system-wide fashion. GConf is also used as
GSettings backend via the GSETTINGS_BACKEND environment variable.
All of this will be removed when these programs have been ported
to GSettings and able to use dconf.
GLib 2.25.9 is required. Schemas are converted to the new XML format,
and compiled at build time in data/ so that the Shell can be run from
the source tree. This also requires setting the GSETTINGS_SCHEMA_DIR
environment variable both when running installed or from source tree,
in src/gnome-shell.in and src/gnome-shell-clock-preferences.in.
https://bugzilla.gnome.org/show_bug.cgi?id=617917
The shell design says that upon launching an application,
no X window should have focus, and we should display an
animated launching indicator.
Implement this by in panel.js, keep track of the last started
application. If there isn't currently an X focus, show an animation
for the last starting application.
https://bugzilla.gnome.org/show_bug.cgi?id=598349
Canonical replaced status icons with libindicator based solutions,
which don't work in the shell environment. Force the distro-patched
versions to fall-back to upstream.
https://bugzilla.gnome.org/show_bug.cgi?id=621382
While zoomed out in drag mode, the workspaces at the left and right
of the active workspace are slightly transparent - when switching
workspaces, one of the transparent workspaces becomes the new active
workspace, but its opacity is not updated.
https://bugzilla.gnome.org/show_bug.cgi?id=620940
When in drag mode, the linear view raises a transparent actor
covering the entire stage. That way the view can handle events
like dragging items to the screen edges, but in order to not
disable any drop target not handled by itself, it duplicates
huge amounts of code from dnd.js.
Cleanup that mess by using the new drag monitoring support.
https://bugzilla.gnome.org/show_bug.cgi?id=620504
Sometimes it is desirable to be able to react to DND events that
happen outside a target actor's bounds, e.g. to implement reactive
screen edges. Add a simple interface which allows to hook into
drag motion and drop handling without jumping through ugly hoops.
https://bugzilla.gnome.org/show_bug.cgi?id=620504
The design calls for item to not appear abruptly, but not too slow
either - 100ms seems to be a good sweet spot for elements which are
supposed to appear "instantly".
Add a fade effect to the alt-tab popup and set the timings for other
fade effects to 100ms.
https://bugzilla.gnome.org/show_bug.cgi?id=621247
We query the transformed position and size of the popupMenu before actually showing
it which results into wrong positioning, when displaying it for the first time.
In case of the statusMenu this can even result into it being offscreen.
https://bugzilla.gnome.org/show_bug.cgi?id=621385
Add _st_actor_contains() in st-private for use within St, and
monkey-patch in a Clutter.Actor.contains() for use by javascript, and
then replace all the duplicate implementations with one or the other
of those.
https://bugzilla.gnome.org/show_bug.cgi?id=621197
Currently, we use 'gtk-yes', 'gtk-no' and 'gtk-media-pause' as
user status icons. It seems more logical to use the dedicated
icons from gnome-icon-theme instead.
https://bugzilla.gnome.org/show_bug.cgi?id=620374
First, we were passing an incorrect timestamp to
meta_display_focus_the_no_focus_window - fix that.
The invocation of set_focus_app to the started app there couldn't
really work, because (if the above call had worked) we'd get the
X reply *after* the started app.
What we need to untangle here is the distinction that's now made in
ShellApp between _STATE_STARTING and _STATE_RUNNING. A nice way to
start doing this is to rebase ShellWindowTracker to only be concerned
with app states. Concretely, the current "has windows implies
running" logic now lives just inside shell-app.c.
Rename the app-running-changed signal to be app-state-changed. This
will ultimately be useful so that inside the panel, we can track
the last started app.
https://bugzilla.gnome.org/show_bug.cgi?id=620899
Currently the workspaceSwitcher does not take the screen size into account
which could result into overflowing the screen.
Fix that but using Shell.GenericContainer instead of St.BoxLayout which takes
the monitor size into account when allocating.
https://bugzilla.gnome.org/show_bug.cgi?id=620404
Before adding a new entry to the history, we check that it does not
match the previous entry to cut down the number of duplicate entries.
Part of that condition is a check for a history length greater zero
to avoid an illegal negative index, with the side effect that nothing
is ever added while the history is empty.
https://bugzilla.gnome.org/show_bug.cgi?id=621123
As the design calls for smooth transitions whenever possible, use
a similar fade effect for the all-apps and more-docs menus as for
the panel menus.
https://bugzilla.gnome.org/show_bug.cgi?id=620775
When the app well doesn't contain any applications, it displays a placeholder text
to indicate that it's a drop target. When porting WellGrid from St.Bin to St.BoxLayout,
the call to set_child() to set the text was overlooked.
https://bugzilla.gnome.org/show_bug.cgi?id=617281
Currently, only the base style class is set in the constructor, the
style update according to the state of the represented app is deferred
until the actor is shown.
As existing icons are destroyed and recreated when the number of icons
changes, this behavior causes the icons of running apps to flicker if
CSS transitions are used.
Set the style directly in the constructor and update the code to not
delay style updates until the actor is shown - StWidget does defer
expensive calculations until the actor is mapped anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=620782
As the search entry captures the pointer when activated, the hover
state is not updated properly when the activation is cancelled
(either by clicking outside the entry or by hitting Escape).
Update the state manually in these cases.
https://bugzilla.gnome.org/show_bug.cgi?id=611095
Separate out the main app view into different sections based on the categories
in the desktop file. The configuration is done via gmenu and the desktop menu
specification, we set XDG_MENU_PREFIX="gs-" on startup, so that gmenu reads
gs-applications.menu, which we install.
There is no support for "submenus" - only the menus directly under
Applications will be displayed as categories.
https://bugzilla.gnome.org/show_bug.cgi?id=614131
Currently we only relayout when the screen size changes, this gets
the cases where a monitor gets added/removed but not when the primary
monitor changes.
We need to relayout on all monitor layout changes.
Remove ShellGlobal::screen-size-changed signal as it is no longer used, Gdk is
used to track changes now.
A ShellGlobal::gdk-screen property is added for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=620377
In all the cases where we activate GNOME 2 UI, e.g. the shutdown
dialog, pop out of the overview. Otherwise, it's fairly broken
since you won't see the result of your action.
https://bugzilla.gnome.org/show_bug.cgi?id=620525
Currently we don't get any drop events for dual screen modes with a screen
at the right, and behave weird by hardcoding the screen size and 0 as drag
edges.
Fix that by spawning the drop group over the whole stage and take the primary monitors position and size into account in _handleDragOver.
https://bugzilla.gnome.org/show_bug.cgi?id=620378
This patch adds ISO week dates to the calendar. Week dates are an
often used feature in business and government offices. Can be turned
on through gconf, off by default.
https://bugzilla.gnome.org/show_bug.cgi?id=603532
When dragging windows in linear view, the workspace zooms out to
allow moving the window to other workspaces. Enable the same
behaviour for items dragged from the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=618055
While zoomed out, the workspaces view's drop target spans the entire
monitor to implement reactive screen edges. When a drop event is not
handled by the view, an attempt is made to pass it on down the stack,
but it doesn't work properly. Fix it by iterating the target's parents
as well.
Also improve the code which translates dnd coordinates to target
positions.
https://bugzilla.gnome.org/show_bug.cgi?id=619203
Ignore the fullscreen flag when we are in the overview,
otherwise we might up not showing actors like the panel even though
they have visibleInOverview set to true.
https://bugzilla.gnome.org/show_bug.cgi?id=619693
Compute a frame rate for the period between:
- User sees first frame of overview animation
- User sees fully zoomed-out overview
And replace the current Frames count metrics with this. The
previous frame count metrics were actually over the period from
the start of the animation until the window labels finished
animating in; here we are careful to look at a more restricted
period.
https://bugzilla.gnome.org/show_bug.cgi?id=619521
Add events when we start preparing a frame and finish preparing
a frame. (In addition to measuring property-updating overhead, this allows
us to see the interval between finishing preparing a frame and starting
painting the frame, which is the relayout time.)
https://bugzilla.gnome.org/show_bug.cgi?id=619515
Currently, the drag and drop code assumes that on a successful drop
the target will either consume the drag actor or that it is otherwise
OK to destroy the actor.
As the drag behavior for window preview was changed, dropping a preview
on the dash now results in the preview being swallowed - to fix, add an
option to restore the actor in case of a successful drop as well.
https://bugzilla.gnome.org/show_bug.cgi?id=619203
The activities overview is not a place where we expect users to
interact with a specific application, so showing the application
menu there is misleading.
https://bugzilla.gnome.org/show_bug.cgi?id=618479
The preference dialog for the panel clock does not set its gettext
domain, so it's not translated even if though translations are
already available.
Fix by setting the domain in the GtkBuilder file and binding the
domain to the locale directory.
https://bugzilla.gnome.org/show_bug.cgi?id=618873
There are some places in the code where we use both fixed positioning
and CSS. Currently we use either a combination of ClutterGroup and StBin,
or we uses StBoxLayout with fixed positioning. Replace those with the new
StGroup container.
https://bugzilla.gnome.org/show_bug.cgi?id=613907
First, simply set the ellipsize flag on the application menu labels.
Next, rework how we lay out the panel components so that the center
box is always centered and constrains the left and right, rather
than pushing it around.
Previously, as part of making the shell not obviously explode if
one had a lot of tray icons, we allowed them to push the clock over.
Instead, go back to just failing in this case; we need to exile legacy
tray icons, not be slightly less ugly.
https://bugzilla.gnome.org/show_bug.cgi?id=592640
SwitcherList.actor is no longer a St.BoxLayout but a
GenericContainer now, so the hack in AppSwitcher._getPreferredHeight is no
longer needed (it is called with the correct width now).
https://bugzilla.gnome.org/show_bug.cgi?id=613194
Switch from having separate METRICS and METRIC_DESCRIPTIONS objects
in a perf module to a single METRICS array. This is done so the
perf module can define the units for each metric.
In addition to improving the output in the web interface, the purpose
of having units is to give some clue about how to pick from multiple
values from different runs. In particular, with the assumption that
"noise" on the system will increase run times, for time values we want
to pick the smallest values, while for "rate" values, we want to pick
the largest value.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
When SHELL_PERF_OUTPUT is set, instead of just dumping out the metrics, dump
a more complete report with:
- Event descriptions
- Metric descriptions and value
- Event log
Helper functions shell_perf_log_dump_events() and shell_perf_log_dump_log()
are added to ShellPerfLog to support this. The gnome-shell wrapper is adapted
to deal with the changed report format.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add gnome-shell options:
--perf-iters=ITERS"
Numbers of iterations of performance module to run
--perf-warmup
Run a dry run before performance tests
Make a successful run of a performance test return 0 not non-zero,
and handle the difference between that and a 0-exit in normal
usage (meaning replaced) in the wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
Add some basic statistics for allocated memory based on mallinfo(),
and use that to define two metrics:
usedAfterOverview: bytes used after the overview is shown once
leakedAfterOverview: additional bytes used when the overview is
shown a second time.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We want to be able to summarize the behavior of the shell's
performance in a series of "metrics", like the latency between
clicking on the Activities button and seeing a response.
This patch adds the ability to create a script under perf/
in a special format that automates a series of actions in the
shell, writing events to the performance log, then collects
statistics as the log as replayed and turns them into a set
of metrics.
The script is then executed by running as gnome-shell
--perf=<script>.
The 'core' script which is added here will be the primary
performance measurement script that we use for shell performance
regression testing; right now it has a couple of placeholder
metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
To support scheduling performance-measurement scripts that want to run
a number of actions in series, add shell_global_run_at_leisure() to run
a callback when all work is finished.
The initial implementation of this is not that accurate: we track
business in Tweener.js via new shell_global_begin_work(),
shell_global_end_work() functions, and we also handle the case
where the main loop is continually busy.
https://bugzilla.gnome.org/show_bug.cgi?id=618189
We don't need to reposition the menu every time its button is
allocated; we can just stick it in the right place when we pop it up
(which is guaranteed to not be during a layout cycle).
(This means that now we won't reposition the menu if the button
moves/resizes while the menu is already popped up, but it's not clear
that we'd want it to anyway, since that could easily result in the
user selecting the wrong item, etc.)
Also, we don't need to override the menu's width any more, so remove
that.
https://bugzilla.gnome.org/show_bug.cgi?id=619113
* Align the icons inside text
* Add application name to Quit
* Fade in/out the menu
* Drop some padding around the edges
* Add padding around the separators
* Use a gradient for separators
https://bugzilla.gnome.org/show_bug.cgi?id=618460
Per design discussion, change things back so that when choosing
an individual window, we raise only that window. However
when we select an application, raise all windows.
A behavioral change required to clearly differentiate these
is that when the window thumbnail list is popped up, it no
longer has the first window selected by default. Therefore
the user has to explicitly press the down arrow or use the
mouse to enter individual window selection mode.
https://bugzilla.gnome.org/show_bug.cgi?id=617959
The ShellGlobal initialization performs several actions like connecting
to the X server, ensuring directories exist, etc., that are problematic
because we were creating the object even when running the binary for
introspection scanning. During compilation we may not even have X11
available in e.g. autobuilder type environments, and it's just a
bad idea to connect even if we do.
Avoid this by deferring creation of the ShellGlobal object
until the plugin is actually started.
Now that we're initializing things later, remove the connection to
screen changes, and initialize cached ShellGlobal state at the point
when the plugin is set. The root pixmap actor is now sized initially
on creation too. Instead of relying on screen-size-changed being
emitted on startup, explicitly invoke _relayout().
https://bugzilla.gnome.org/show_bug.cgi?id=618371
Fetch the names of the user's "subscribed" contacts, and use the
SimplePresence interface to watch for available/away/busy/etc messages
and create notifications for them.
Currently we display notifications when switching between "available"
and "offline"/"extended away", but when switching between "available"
and "away"/"busy" we just add the information to the chat window
without popping up a notification, to avoid spamming the user with
"Bob's screensaver activated" messages.
https://bugzilla.gnome.org/show_bug.cgi?id=611613
This is our convention.
The only exceptions are double quotes for words in comments that give
them a special meaning (though beware that these quotes are not truly
necessary most of the time) and double quotes that need to be a part
of the output string.
It was previously possible to add a workspace above the maximum workspaces
limit by dragging an item to the "add workspace" button or using the middle
mouse button click.
Provide the user with feedback in the info bar when it is not possible to create
a new workspace or remove the current workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=591645
This ensures that we launch the new instance of an application on the newly
added workspace in the grid view, in which we don't make the newly added
workspace active by default.
https://bugzilla.gnome.org/show_bug.cgi?id=591645
Allow using the middle mouse button to open a new instance of an
application on a new workspace. The middle mouse button function
can be achieved by clicking the left and right mouse buttons
together with a two buttons mouse or holding Ctrl while clicking
with a single button mouse.
https://bugzilla.gnome.org/show_bug.cgi?id=591645
Adds the ability to create one or more zoom regions that show magnified or
enhanced views of the desktop. The magnifier provides options for:
* magnification factor,
* four mouse tracking modes common to screen magnifiers,
* positioning the magnified view in one of four screen location, or full screen,
* crosshairs to accentuate the position of the mouse,
* user preferences persistence via GConf (schemas in
.../data/gnome-shell.schemas).
* a DBus API to allow other processes to drive the magnifier as a service.
https://bugzilla.gnome.org/show_bug.cgi?id=595507
Currently there is no way for the user to cancel a workspace drag action,
which means the user has to complete the drag action before and move back
to the other workspace manually afterwards.
So cancel the drag action when the user stops.
https://bugzilla.gnome.org/show_bug.cgi?id=618062
Using a horizontal St.BoxLayout for calendar container forces
width-for-height layout on the St.Table child. Since St.Table
is naturally width-for-height, this can trigger bugs and is,
at best, a bit ineffecient. Use a St.Bin instead since we don't
need any BoxLayout features.
https://bugzilla.gnome.org/show_bug.cgi?id=618104
A single window that does not need to be scaled down, should be centered
and not placed at the bottom.
To avoid blurryness window positions should be pixel aligned.
https://bugzilla.gnome.org/show_bug.cgi?id=617827
Some of the workspace view controls are hidden when the number of
workspaces is one (view toggle button, scroll bar in single view).
Use a fade effect instead of showing/hiding the control abruptly.
https://bugzilla.gnome.org/show_bug.cgi?id=613456
When adding/removing workspaces in linear view, both workspaces and
scrollbar movement are animated, but the size of the scrollbar handle
changes abruptly. It is more consistent to animate the size change
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=613456
Add keys for customizing the panel clock to the gconf schema and make
the clock use them. The settings are copied from gnome-panel's clock
applet, excluding all location/weather/appointment/... keys. In addition,
'internet' is no longer a supported value for the format key.
https://bugzilla.gnome.org/show_bug.cgi?id=600276
In preparation for adding magnification, "uiGroup.patch", organizes the stage
along the following lines:
Stage
*Magnifier
UI group
Window group
Chrome group
Overlay group
Alt tab
App display
Chrome
...
This allows a magnifier actor to clone and magnify the UI group. The magnifier
is a sibling of the UI Group in this stage oraganization -- see the next patch,
"Magnifier.patch".
When a dropped window is accepted by a workspace in linear view, it
is moved to the new workspace. After that, the view zooms back in on
the original workspace, resulting in the moved window disappearing
from the user's sight.
Change this rather unexpected behavior, so that a successful drop
triggers a switch to the new workspace. This also improves consistency
with drops on the (+) area.
https://bugzilla.gnome.org/show_bug.cgi?id=617785
Centralize the update of actor visibilities (overlays, shadows,
off-screen workspaces). Adjust the way scrolling is handled so
that it works correctly with removed workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=610191
Activate empathy when clicking on a chat icon by asking the
ChannelDispatcher to open the conversation in the default handler.
Also, remove the Approver and Handler for now, since until
telepathy-logger is stable, this means Empathy won't see (and log)
those conversations. This means that empathy's blinky status icon is
back; we'll have to do something else about that.
https://bugzilla.gnome.org/show_bug.cgi?id=611610
While the extension system already uses an XDG location (XDG_CONFIG_HOME),
other components use the deprecated $HOME/.gnome2 directory.
Replace both with XDG_DATA_HOME - the existing data (app usage stats,
looking glass history and extensions) is not migrated to the new location.
https://bugzilla.gnome.org/show_bug.cgi?id=617555
Previously we used a ClutterGroup containing a second ClutterGroup for
the non-visibleInOverview actors. Redo it using a single
ShellGenericContainer, and use set_skip_paint() to hide the
non-overview chrome when the overview is visible.
Also fix up the default values for trackActor().
https://bugzilla.gnome.org/show_bug.cgi?id=608667
If a notification is about to hide, but the user has moved the mouse
towards it, let it stick around for another second (and so on, until
the mouse either reaches the tray and causes it to be pinned, or stops
moving the mouse toward it).
https://bugzilla.gnome.org/show_bug.cgi?id=610071
Figure out if the banner is too long to fit as soon as the
notification's style is set, rather than waiting until allocation
time, since it's bad to add new table rows during allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=611612
Cache avatars to avoid having to re-download them every session.
We use a cache format that is compatible with empathy's, but we don't
actually use empathy's. This could be changed if we wanted.
https://bugzilla.gnome.org/show_bug.cgi?id=614974
This change doesn't actually affect anything visibly, but
using the absolute coordinates of our allocation box in allocate()
is wrong; we should be positioning our children at 0,0 and using
width/height as a reference.
https://bugzilla.gnome.org/show_bug.cgi?id=616951
This patch combines several high level changes which are conceptually
independent but in practice rather intertwined.
* Add a "state" property to ShellApp which reflects whether it's
stopped, starting, or started. This will allow us to later clean
up all the callers that are using ".get_windows().length > 0" as
a proxy for this property
* Replace shell_app_launch with shell_app_activate and shell_app_open_new_window
A lot of code was calling .launch, but it's signficantly clearer
if we call this ".open_new_window()", and later if we gain the ability
to call into an application's menu, we can implement this correctly rather
than trying to update all .launch callers.
* Because ShellApp now has a "starting" state, rebase panel.js on top of
this so that when we get a startup-notification sequence for an app
and transition it to starting, it becomes the focus app, and panel.js
cleanly just tracks the focus app, rather than bouncing between SN
sequences. This removes display of non-app startup sequences, which
I consider an acceptable action in light of the committed changes
to startup-notification and GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=614755
We can't use gdk_display_get_pointer/gdk_window_get_pointer from gjs
when XKB is active. We already had a wrapper that did the
get-modifier-state part of that, but some places also need the
get-pointer-location part of it. So update our wrapper to return both,
and update js code to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=613428
The original window dnd code needed to track whether or not the
pointer was in the clone. Some later rewrite made this unnecessary,
but we were still keeping track anyway.
When the notificaionBin has an odd width this could result into
loosing pixel aligment (and ugly looking font).
As the notification is already reactive make it non reactive and
remove the use of garvity.
https://bugzilla.gnome.org/show_bug.cgi?id=614702
Also reorganizes the notification layout to use an StScrollView; very
tall notifications are now scrolled instead of just taking up more and
more of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=608999
Also, remove a lot of cruft from genericDisplay.js leftover from
previous St-ifications, and remove the pre-gtk-2.16 hacks from the
status tray in panel.js (which are much less needed with the
nearly-all-black panel anyway).
https://bugzilla.gnome.org/show_bug.cgi?id=614516
The actual changes to shell-menu.[ch] are pretty minimal; most of the
changes there are just style/spacing/indentation.
Also, removed shell_menu_append_separator() since it wasn't needed;
the separators would already have been behaving as intended just
because they were non-reactive.
https://bugzilla.gnome.org/show_bug.cgi?id=614516
The check in _windowsRestacked checks for
windows[i].x >= primary.x
and
windows[i].x <= primary.x + primary.width
(likewise for y).
This is wrong because a fullscreen window on the secondary screen is likely
to have windows[i].x == primary.x + primary.width which means that the checks
for _both_ screens would be valid, but the first one would win due to
the "break;" statement.
But here the window isn't really on the primary but on the secondary one.
Fix that by using < instead of <= for those checks.
https://bugzilla.gnome.org/show_bug.cgi?id=614509
Moving to St.Table introduced a regression that resulted in the height
of Places section to only depend on the height of the left column.
This could result into some bookmarks not being displayed at all because
there are not enough items in the left column to allocate the needed height.
Fix this by removing the St.BoxLayout actors and add the items directly to
the table.
https://bugzilla.gnome.org/show_bug.cgi?id=614144
Notify() was calling setApp() unconditionally after attempting to
determine an application. However, determining the application can
fail (for example, when notify-send is used) and resulted in an exception
being printed.
Rather than having the notificationBin, summaryBin, and
summaryNotificationBin span the whole width of the screen and just
align their children to the right spot, set their anchor_gravity
appropriately, set their anchor point correctly, and let their width
vary with the width of their child.
Fixes the fact that the area to the left and right of an expanded
notification was reactive, because the notificationBin was invisibly
covering it.
https://bugzilla.gnome.org/show_bug.cgi?id=612072
Currently manual dnd mode is used with St.Clickable to avoid messing
up its internal state with a pointer grab. To avoid code duplication,
move this special handling into dnd.
https://bugzilla.gnome.org/show_bug.cgi?id=610385
While most of the code already is CSS stylable, the two-colum setup
is still done using Big.Box with hard coded spacings. Port those
remaining parts to St.Widget, so that all spacings can be adjusted
by the theme.
https://bugzilla.gnome.org/show_bug.cgi?id=610385
The POPUP_LIST_SPACING constant was used for the AltTabPopup.actor's padding,
AltTabPopup.actor's spacing and SwitcherList._list's spacing.
Switch to CSS and remove the constant.
https://bugzilla.gnome.org/show_bug.cgi?id=613195
Left-clicking an app icon and holding the button used to pop up the
app menu, but regressed when rewriting appDisplay.
Restore the previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=609013
Clicking the eject button in the places display always triggers an
unmount action. In some cases like USB drives or DVDs, eject makes
more sense - it is also consistent with nautilus' behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=613405
After closing a window, the remaining previews are repositioned
after a timeout; when it is called while the user zooms a preview,
the window positions get all messed up, so postpone the positioning
in this case until the zoom ends.
https://bugzilla.gnome.org/show_bug.cgi?id=613536
The hover rewrite added a freeze/thaw_notify to
st_clickable_leave_event() (to match the one already in
st_clickable_enter_event()), which broke code in two places that
assumed "pressed" would still be TRUE when "hover" changed to FALSE.
Fix that by exposing the "held" property as well.
St.Widget's new "hover" property takes reactive children into account
when deciding whether or not the pointer has actually left the actor,
so it works better than the code that used to be here.
https://bugzilla.gnome.org/show_bug.cgi?id=610726
If track-hover is set, update the hover property automatically, and
the "hover" pseudo class to match, as StClickable used to do. (Remove
the corresponding code in StClickable). Tweak the tooltip handling to
use track-hover, which also makes it slightly more reliable in the
presence of reactive children, etc.
Since style_class and pseudo_class are space-separated lists of names,
add new methods to add and remove individual names rather than just
re-setting the entire name.
Update existing code to use the new pseudo-class methods where
appropriate. In some cases, this may result in actors having multiple
pseudoclasses where previously they only had one at a time, but there
don't seem to be any visible differences.
(There are some places that could usefully use the new style_class
methods as well, but this patch doesn't change them.)
Also, update test-theme.c to test the new methods.
https://bugzilla.gnome.org/show_bug.cgi?id=604943
When the user runs the same command as the last one saved there
is no need to save it again, otherwise we the history might end
up having lots of dupes which makes searching for an old command
harder.
https://bugzilla.gnome.org/show_bug.cgi?id=613731
Using a clone for the drag actor causes the animation into
the final position not to work as expected; instead use
the newly added DND parameters to change the original
drag actors size and opacity. (This reverts the change in
011db9f).
Since we are using the original actor, we have to be careful
not to change it during the drag, so don't actually position
dragged window actors in Workspace.positionWindows().
https://bugzilla.gnome.org/show_bug.cgi?id=613367
Gjs now removes user_data arguments for callbacks - the existing
code still works because all user_data arguments are unused and
at the end of the argument list, but it's a lot prettier to remove
them.
Currently, the workspace objects are destroyed and recreated on
view switches. Instead, keep the objects around and reparent the
workspace actors on view switches.
https://bugzilla.gnome.org/show_bug.cgi?id=610191
Depending on screen size and pointer position, the scroll bar used
to switch the active workspace in linear view may not be a convenient
target, so allow dragging the desktop as an alternative.
https://bugzilla.gnome.org/show_bug.cgi?id=610892
DND from the places section broke with 1c4c3afb when St.Label was
replaced with St.Button.
To fix, replace St.Button with St.Clickable and use a fake_release
when starting a drag.
https://bugzilla.gnome.org/show_bug.cgi?id=609218
Currently we use two buttons to toggle between the different views,
one of them always being redundant.
Fix that by only use one button that changes it's style depending on
the current view.
https://bugzilla.gnome.org/show_bug.cgi?id=610801
When an unmount operation fails, the only feedback given currently
is an exception on stderr. Use the infoBar to display an error
message and allow the user to retry the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=612200
Currently the infoBar's button will always read "Undo" - sometimes
a different label makes more sense, so allow to optionally set the
label to something else.
https://bugzilla.gnome.org/show_bug.cgi?id=612200
Instead of setting a fixed size in the CSS which only works well
with a limited range of screen resolutions, assign a relative
size in the code.
While this takes away some flexibility from theme authors, it is in
line with most elements in the overview (workspaces area, dash).
Also expose the menu panes vertical alignment, so that more-apps aligns
to the workspaces area's top and more-docs to the bottom.
https://bugzilla.gnome.org/show_bug.cgi?id=610872
Limit the AppSwitcher to the screen size by either downscaling or
scrolling.
We scale the icons down up from 96, 64, 48, 32 to 22 and start scrolling
if we still fail to fit on screen.
The thumbnail box is shifted to either left or right, when failing to
fit we scroll here to.
To prevent from being offscreen at the buttom we adjust the thumbnail
height to fit.
The old positioning logic is replaced with a ShellGenericContainer to
implement a custom allocation system.
https://bugzilla.gnome.org/show_bug.cgi?id=597983
As the repositioning after closing a window preview is delayed, it is
possible that the timeout is triggered while leaving the overview. In
that case the previews move to the new overview position and are changed
abruptly to the original window position when the overview zoom is done.
To prevent this, disconnect the handler when leaving the overview.
Rename WorkspacesViewSwitch to WorkspacesControls and let it manage
all workspace controls. Do not destroy and recreate the controls bar
actor on each view change, but add it to the overview once and let it
update itself.
https://bugzilla.gnome.org/show_bug.cgi?id=610189
Hide the original actor during a grab, and create a new
clone. This is easier than trying to ensure we maintain
the state of the original window clone.
https://bugzilla.gnome.org/show_bug.cgi?id=607821
The way we were loading data into a CoglTexture, then pulling it out
and manipulating it on the CPU, then loading it back into a texture
was a bit lame.
Clean things up a bit here by loading directly into the CPU, doing
the fading, then creating a texture.
Also cache the faded data in StTextureCache.
https://bugzilla.gnome.org/show_bug.cgi?id=612759
Having StDrawingArea use ClutterCairoTexture causes circularity
problems with sizing - StDrawingArea wants to use its allocation for
the size of the texture, but ClutterTexture wants to use the size of
the texture to determine the requited size.
Avoid this by making StDrawingArea directly use Cairo and CoglTexture;
while doing this, the API is changed a bit for simplicity and to
match our use case:
- Instead of clutter_cairo_texture_create(), we have
st_drawing_area_get_context() to retrieve an already created
context. This can only be called in the ::repaint signal.
- The ::redraw signal is changed to ::repaint so we can have
st_drawing_area_queue_repaint() that doesn't collide with
clutter_actor_queue_redraw()
- ::repaint is now emitted lazily when painting the actor rather
than synchronously at various different points.
https://bugzilla.gnome.org/show_bug.cgi?id=611750
Currently clicking on an empty spot on the workspace actors switches to the workspace, this has a side effect that when for some reason (like using a touchpad),
the user misses the window he intends to open he will end up with the currently focused window instead.
Disable this behaviour if more than one window is open (in that case the user has to explicitly target a specific window).
https://bugzilla.gnome.org/show_bug.cgi?id=610868
Support completion on files and folders in the run dialog and launch
the default application when activated. Assume a path relative to the
home directory if execution as command fails and the input doesn't start
with a slash.
Removed workaround for relayout of error messages.
https://bugzilla.gnome.org/show_bug.cgi?id=611209
We used to set this._notificationRemoved to false in _hideNotification().
However, the user focusing on the associated application can result in the
source being removed while the notification is hiding, in which case
this._notificationRemoved was set to true and never unset. This resulted in
the next notification only showing up briefly and hiding. Moving setting
this._notificationRemoved to false to _hideNotificationComplete() fixes this
behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=611122
The top part of the application pane closes the pane, while outside
the menu only the workspace area accepts clicks for closing the pane.
Let the user close the pane by clicking anywhere outside the menu, but
not inside.
https://bugzilla.gnome.org/show_bug.cgi?id=611641
When closing windows in the window picker, the remaining windows
move to their new positions, which prevents the user from performing
additional actions in the picker until the animation stops and the
user adjusts to the new layout.
Instead we try to be smart and delay the repositioning, either until
the pointer stops moving or until it leaves the workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=611167
Brute force merge these two by essentially replacing St.TextureCache
with a (renamed) Shell.TextureCache.
One function was added for convenience, namely "st_texture_cache_load_file_simple".
St.TextureCache had a function to load a texture from a filename, and it
returned NULL on error but only half the callers actually checked this. This
function is better.
https://bugzilla.gnome.org/show_bug.cgi?id=607500
These variables were computed strangely; through cancellation
they'd end up being negative 1/2 the width/height of the actor,
so just use that directly.
https://bugzilla.gnome.org/show_bug.cgi?id=607821
The current check looks at whether there was some am/pm suffix in the
localized time; however in some cases (locales) that does not seem to
work. this version instead checks whether the localized versions of 05:00 and
17:00 start with the same two digits; if not, it's probably a 24h clock.
https://bugzilla.gnome.org/show_bug.cgi?id=603488
The previous commit broke activation when selecting an actor
from a custom renderer. Fix this by explicitly defining a method
activateSelected on the search renderer.
Switch to using an application icon as per design.
We need to drop the 4 pixels padding to ensure we fit 3 icons.
There was a typo where getVisibleCount should have been getVisibleResultsCount.
https://bugzilla.gnome.org/show_bug.cgi?id=610740
When workspaces slide in/out in mosaic view, they may cross with the
workspace controls, which looks pretty weird.
Also adjust the vertical spacing in the grid view so that the grid height
matches the workspace height in the linear view.
https://bugzilla.gnome.org/show_bug.cgi?id=610350
When figuring out where to position window previews, use the clone's
position instead of the the original meta window. There shouldn't be
a difference when entering the overview, but it makes the motion when
opening/closing new windows in the overview tinier and more predictable.
https://bugzilla.gnome.org/show_bug.cgi?id=611167
Fading the application icon required the texture to have already been
loaded, which was normally the case since we create icons for apps
in the well and browser; but when finding an app not from there,
the cogl-texture for the icon might not be available.
Fix this by watching for the texture and fading when it appears.
https://bugzilla.gnome.org/show_bug.cgi?id=611288
Because we were setting the "fixed-position-set" property
on the internal label, its width/height requests weren't
being accounted for in the size request of the overall box.
The way we were hooking up to notify::allocation was hacky; do
this correctly by simply implementing a container.
https://bugzilla.gnome.org/show_bug.cgi?id=611288
Currently the picker displays information on the hovered actor's
position and the object itself. Adding style id and class of
StWidgets to the displayed information can be very helpful for
identifying a particular actor or code segment.
https://bugzilla.gnome.org/show_bug.cgi?id=611211
When the currently focused app sends a notification while in the overview,
the corresponding source icon is not removed when the overview is left.
It does make some sense to treat the overview transition the same as a
normal focus change, so we should update the summary view accordingly.
When a notification is updated by the application, the corresponding
app in its source is lost, so it is no longer possible to switch to
the application by clicking either the notification or the summary icon.
As the associated application of a source never changes, it appears safe
to leave it alone on notification updates.
https://bugzilla.gnome.org/show_bug.cgi?id=610820
Source icons are no longer needed to inform the user about events
having occured in a particular application when (s)he activates the
window - treat that case just as if the user had clicked the source
icon.
https://bugzilla.gnome.org/show_bug.cgi?id=610494
Right now notifications are expandable if the length of bannerText
exceeds the notification's width - however, if bannerText contains
newlines, it should be expandable regardless of the length.
https://bugzilla.gnome.org/show_bug.cgi?id=610549
When leaving the overview by hitting escape or super, all windows animate
to their original positions. Zoomed windows are kept above others until
the animation ends, then the focused window is brought to the front; as
this looks odd if the zoomed window does not have focus, cancel the zoom
in that case before leaving the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=609243
While zooming, a window clone is reparented to the stage and thus cannot
be destroyed automatically by the "parent" container. To prevent the clone
and the corresponding overlay from leaking, we enforce destroying the clone
with the workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=609243
We are planning to add Empathy-specific features in the message tray, but in the
meantime we handle Empathy notifications received through the notification daemon
so that their behavior is closer to the eventual design, which is how it was before
we started associating applications with a single source and enabled notification
replacement.
Use the "appName" parameter in notifications to identify the source
rather than the id - use the latter to enable update and removal of
individual notifications as laid out in the desktop notification spec.
This is a rebase of the patch by Florian Müllner.
Add a 'vshadow' property to StScrollView, which, when turned on,
overlays gradient shadows on the top and bottom of the StScrollView.
Turn this on for the StScrollView used for the app browser.
https://bugzilla.gnome.org/show_bug.cgi?id=609604
Changes notifications like:
XChat: Private message from: danw (GimpNet) blah...
to
danw: blah blah blah blah
(the "XChat" being unnecessary since there's already an xchat icon
there anyway.)
https://bugzilla.gnome.org/show_bug.cgi?id=608915
Make the width of the workspace switcher dynamic in order to make it have the same proportions as the actual screen.
Call redraw after adding indicator to stage to avoid warning.
https://bugzilla.gnome.org/show_bug.cgi?id=610049
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Inform the user about demands attention events using the messagetray.
Clicking on the notification icon moves the user to the window.
It differentiates between newly started apps and windows of already running apps, by showing different banners for this cases.
It is based on Jon Nettleton's "window attention" extension.
https://bugzilla.gnome.org/show_bug.cgi?id=610594
WindowOverlay has two actors, both with custom style properties, which
share a common _onStyleChanged() handler. This is not a problem when
entering the overview, because the actors' parent (the workspaces group)
is hidden while the actors are added. However, when windows are added to
the workspace while in the overview (e.g. when opening a new window or
dragging a window from one workspace to another), adding the first actor
to the workspaces group triggers a style-changed signal - the handler
then calls st_widget_get_theme_node() on both actors, which triggers a
warning as the second actor has not been parented yet.
https://bugzilla.gnome.org/show_bug.cgi?id=610279
If the notification body contains '&' it ends up empty and a warning
about an invalid entity is printed on stderr, so our escape code must
handle ampersands as well.
https://bugzilla.gnome.org/show_bug.cgi?id=607375
Right now, the summary starts popping up when the overview has been
shown and starts to disappear when the overview is hidden. Instead,
animate the summary during the overview transition.
https://bugzilla.gnome.org/show_bug.cgi?id=610520
Unify the style of <delegate>.destroy() methods to only contain a
call to <delegate>.actor.destroy() and handle additional cleanup
in a _onDestroy() signal handler.
https://bugzilla.gnome.org/show_bug.cgi?id=609454
Instead of deleting workspaces immediately, animate the removal - it may
be useless eye-candy, but it's pretty sexy nonetheless ...
More seriously, the animation improves consistency with both workspace
additions and the mosaic view.
https://bugzilla.gnome.org/show_bug.cgi?id=609673
Currently the width of the gaps between workspaces in both linear
and mosaic view are defined as constants. Move these to the theme's
CSS instead.
https://bugzilla.gnome.org/show_bug.cgi?id=609673
Reorganize the code to break up positioning into:
1) updating workspace object's scale and position
2) applying the updated parameters to the workspace actor
3) scrolling the view to a particular workspace
4) handling dragging of the scroll bar
With these cleanups, it becomes much easier to fix
the following issues:
- use animations consistantly instead of doing hard breaks
for some actions and smooth transitions for others
- snap to the closest workspace when scrolling stops
(https://bugzilla.gnome.org/show_bug.cgi?id=607823)
- fix the regression of the zoomFromOverlay animation when
the selected app is on another workspace
(https://bugzilla.gnome.org/show_bug.cgi?id=609081)
https://bugzilla.gnome.org/show_bug.cgi?id=609673
This way, clicking a message tray icon while the overview is open will
close the overview when activating its window.
Remove some other overview-related activation code which is now
redundant.
Also, remove calls to "global.get_current_time()" when calling
Main.activateWindow, since it's unnecessary (activateWindow will call
it itself if you don't pass in that arg).
https://bugzilla.gnome.org/show_bug.cgi?id=609765
Previously, every time _updateState was called, it would make some
change, and so it was necessary to very carefully set up all the calls
to it, to ensure it was always called at exactly the right time. Now,
instead, we keep a bunch of state variables like "_notificationState"
and "_pointerInSummary", and potentially multiple timeouts, and
_updateState looks at all of them and figure out what, if anything,
needs to be changed.
By making the rules about what causes changes more explicit, it will
be easier to change those rules in the future as we add new
functionality.
Also, update the rules a bit, so that notifications can appear while
the summary is visible, and the summary only shows after a
notification if the summary has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=609765
Fallback icons (i.e icons < requested size) cause the box in the switcher
to be a smaller rectangular item instead of the normal sized square one.
Fix that by putting the icons in a St.Bin with the correct size.
https://bugzilla.gnome.org/show_bug.cgi?id=609777
Currently, activating a search result always opens a new window. Change
this behavior, so that if an application has open windows, the most
recently used one is activated instead.
Also change the implementation of dnd of search results to allow providers
to treat results activated via dnd differently.
https://bugzilla.gnome.org/show_bug.cgi?id=610027
Previously the banner was only promoted to the body if it got
truncated, but the banner was *always* hidden when expanding the
notification. This meant a message with a short banner, plus
notification buttons, would have no banner text visible when it was
expanded. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=606755
As desktop icons don't have any purpose in the overview (except for
distracting the user), fade them out when entering the overview.
Unfortunately, the fading effect affects performance, therefore hide
icons directly when there are maximized windows on the desktop.
https://bugzilla.gnome.org/show_bug.cgi?id=600999
This adds some meaningful functionality to the notification icons in the tray
and in the notification pop-up and allows to switch to the application that
sent the notification.
We get the application from the notification context and set it on the source
for the notification.
