For consistency, and since those signals are key-related, the
::focus-in signal is not ::key-focus-in and the ::focus-out
signal is now ::key-focus-out.
With the recent change to internal floating point values, ClutterUnit
has become a redundant type, defined to be a float. All integer entry
points are being internally converted to floating point values to be
passed to the GL pipeline with the least amount of conversion.
ClutterUnit is thus exposed as just a "pixel with fractionary bits",
and not -- as users might think -- as generic, resolution and device
independent units. not that it was the case, but a definitive amount
of people was convinced it did provide this "feature", and was flummoxed
about the mere existence of this type.
So, having ClutterUnit exposed in the public API doubles the entry
points and has the following disadvantages:
- we have to maintain twice the amount of entry points in ClutterActor
- we still do an integer-to-float implicit conversion
- we introduce a weird impedance between pixels and "pixels with
fractionary bits"
- language bindings will have to choose what to bind, and resort
to manually overriding the API
+ *except* for language bindings based on GObject-Introspection, as
they cannot do manual overrides, thus will replicate the entire
set of entry points
For these reason, we should coalesces every Actor entry point for
pixels and for ClutterUnit into a single entry point taking a float,
like:
void clutter_actor_set_x (ClutterActor *self,
gfloat x);
void clutter_actor_get_size (ClutterActor *self,
gfloat *width,
gfloat *height);
gfloat clutter_actor_get_height (ClutterActor *self);
etc.
The issues I have identified are:
- we'll have a two cases of compiler warnings:
- printf() format of the return values from %d to %f
- clutter_actor_get_size() taking floats instead of unsigned ints
- we'll have a problem with varargs when passing an integer instead
of a floating point value, except on 64bit platforms where the
size of a float is the same as the size of an int
To be clear: the *intent* of the API should not change -- we still use
pixels everywhere -- but:
- we remove ambiguity in the API with regard to pixels and units
- we remove entry points we get to maintain for the whole 1.0
version of the API
- we make things simpler to bind for both manual language bindings
and automatic (gobject-introspection based) ones
- we have the simplest API possible while still exposing the
capabilities of the underlying GL implementation
The flags field of ClutterActor should have accessor methods for,
language bindings.
Also, the set_flags() and unset_flags() methods should actively
emit notifications for the changed properties.
Bug 1138 - No trackable "mapped" state
* Add a VISIBLE flag tracking application programmer's
expected showing-state for the actor, allowing us to
always ensure we keep what the app wants while tracking
internal implementation state separately.
* Make MAPPED reflect whether the actor will be painted;
add notification on a ClutterActor::mapped property.
Keep MAPPED state updated as the actor is shown,
ancestors are shown, actor is reparented, etc.
* Require a stage and realized parents to realize; this means
at realization time the correct window system and GL resources
are known. But unparented actors can no longer be realized.
* Allow children to be unrealized even if parent is realized.
Otherwise in effect either all actors or no actors are realized,
i.e. it becomes a stage-global flag.
* Allow clutter_actor_realize() to "fail" if not inside a toplevel
* Rework clutter_actor_unrealize() so internally we have
a flavor that does not mess with visibility flag
* Add _clutter_actor_rerealize() to encapsulate a somewhat
tricky operation we were doing in a couple of places
* Do not realize/unrealize children in ClutterGroup,
ClutterActor already does it
* Do not realize impl by hand in clutter_stage_show(),
since showing impl already does that
* Do not unrealize in various dispose() methods, since
ClutterActor dispose implementation already does it
and chaining up is mandatory
* ClutterTexture uses COGL while unrealizable (before it's
added to a stage). Previously this breakage was affecting
ClutterActor because we had to allow realize outside
a stage. Move the breakage to ClutterTexture, by making
ClutterTexture just use COGL while not realized.
* Unrealize before we set parent to NULL in clutter_actor_unparent().
This means unrealize() implementations can get to the stage.
Because actors need the stage in order to detach from stage.
* Update clutter-actor-invariants.txt to reflect latest changes
* Remove explicit hide/unrealize from ClutterActor::dispose since
unparent already forces those
Instead just assert that unparent() occurred and did the right thing.
* Check whether parent implements unrealize before chaining up
Needed because ClutterGroup no longer has to implement unrealize.
* Perform unrealize in the default handler for the signal.
This allows non-containers that have children to work properly,
and allows containers to override how it's done.
* Add map/unmap virtual methods and set MAPPED flag on self and
children in there. This allows subclasses to hook map/unmap.
These are not signals, because notify::mapped is better for
anything it's legitimate for a non-subclass to do.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1454 - move queue_redraw virtualization to ClutterActor
The ClutterActor::queue-redraw signal allows parent containers to
track whether their children need a redraw.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Final bit of integration between ClutterActor and Pango: a simple
method for creating a PangoLayout, pre-filled with text and ready
to be rendered using cogl_pango_render_layout().
This should make writing new Actors rendering custom text in their
paint() implementation easy and reliable.
Currently only the Z axis rotation center can be set using a gravity
but the other rotations also store their center as an AnchorCoord for
consistency. Specifying the center as a gravity makes less sense for
the other axes because the actors have no size along the Z axis.
The rotation angles are now stored as gdoubles and the fixed point *x
entry points have been removed.
The Z rotation can now be set with a gravity center using the
following new function:
void clutter_actor_set_z_rotation_from_gravity (ClutterActor *self,
gdouble angle,
ClutterGravity gravity);
This sets the center point from which the scaling will occur. This can
be used insetad of the anchor point to avoid moving the actor. Like
the anchor point, it can be specified as either a coordinate in units
or a gravity enum.
To set the center you can use two new variants of set_scale:
clutter_actor_set_scale_full (ClutterActor *self,
gdouble scale_x,
gdouble scale_y,
int center_x,
int center_y);
or
clutter_actor_set_scale_with_gravity (ClutterActor *self,
gdouble scale_x,
gdouble scale_y,
ClutterGravity gravity);
The ClutterFixed variants of the set_scale functions have been removed
and the scale value is now always stored as a double.
This makes it so when the anchor point is set using a gravity enum
then the anchor point moves when the actor changes size. A new
property is added for the anchor point gravity. If the anchor point is
set from gravity then the position in units can also be retreived with
the regular API.
A new union type is used to store the anchor point with helper
accessor functions. The hope is these can be reused for the scale and
rotation center points.
If you try to use the CLUTTER_ACTOR_IS_* macros defined in ClutterActor
like this:
typedef struct { unsigned int reactive : 1; } foo_t;
foo_t f; f.reactive = CLUTTER_ACTOR_IS_REACTIVE (actor);
It will blow up because while the macros evaluate to 0 they can also
evaluate to non-zero values. Since most of the boolean flags in
Clutter and Clutter-based code are going to be stored like in the
example above, we should change the macros and let them evaluate
stricly either to 0 or to 1.
Sometimes an actor needs to set specific font rendering options on
the PangoContext without changing settings for every other text-rendering
actor.
In order to do this, we need a new public method to create a Pango
context object -- preset with all the default settings -- owned by the
developer and not shared with the rest of Clutter.
This new method is called clutter_actor_create_pango_context(); while
it does not strictly depend on a ClutterActor, it is a good idea to
have it inside the ClutterActor API to map the current get_pango_context()
method and in case we start storing screen-specific data to the Actor
itself during the 1.x API cycle.
Rendering text inside an actor is pretty much impossible without
using internal API to create the various pieces like the PangoContext
and the font map.
Each actor should have the ability to create a PangoContext, which
is the only object needed to generate layouts and change the various
Pango settings.
This commit adds a clutter_actor_get_pango_context() function that
creates a PangoContext inside the ClutterActor private data and allows
the creation of PangoLayouts when needed. If the actor already
has a PangoContext, the same instance is returned.
The PangoContext is created only on demand.
Bug 1003 - Add clutter_actor_take_key_focus()
The grab_key_focus() method is just a simple wrapper around
clutter_stage_take_key_focus() that removes the need to get
the ClutterStage of an actor in order to set the key focus.
Based on a patch by Xan López.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Signed-off-by: Øyvind Kolås <pippin@linux.intel.com>
When the apply_transform_to_point() and its relative variant
landed in Clutter 0.3, the initial approach was to modify the
passed vertex as an in-out parameter. This was later dropped
in favour of a more consistent out parameter.
Unfortunately, the implementation never changed: both methods
where modifying the passed vertex with the partial results of
the computations.
This commit copies the contents of the "point" ClutterVertex
argument inside a stack variable and, for good measure, constifies
the argument.
Thanks to Thomas Steinacher for catching this in Python.
Bug 1049 - Clutter doesn't support most GLSL uniforms (patch
by Chris Lord and Neil Roberts)
* README: Update release notes.
* clutter/Makefile.am:
* clutter/clutter-shader-types.[ch]: Add GValue types for
shader values.
* clutter/clutter-actor.[ch]: Update the shader API to use
the newly added GValue support for GLSL shader uniform
setters.
* clutter/clutter-shader.[ch]: Add float and integer convenience
API for single value GLSL uniform setters.
* clutter/cogl/cogl-shader.h: Add new uniform setters.
* clutter/cogl/gl/cogl-context.c:
* clutter/cogl/gl/cogl-context.h:
* clutter/cogl/gl/cogl-defines.h.in:
* clutter/cogl/gl/cogl-program.c:
* clutter/cogl/gl/cogl.c: Update the GL implementation of COGL
to handle the GLSL uniform setters.
* clutter/cogl/gles/cogl-gles2-wrapper.c:
* clutter/cogl/gles/cogl-gles2-wrapper.h:
* clutter/cogl/gles/cogl-internal.h:
* clutter/cogl/gles/cogl-program.c: Update the GLES 2.0 implementation
of COGL to handle the GLSL uniform setters.
* doc/reference/clutter/clutter-sections.txt:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-fbo.c:
* tests/interactive/test-shader.c: Update the shader tests.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-clone-texture.c:
* clutter/clutter-private.h:
* clutter/clutter-texture.c:
* clutter/x11/clutter-x11-texture-pixmap.c:
Attempt to lower overhead of updating TFP's (particularly mipmaped).
Compresses mipmap updates only for visible TFPs.
Avoiding updates for non visible TFP's whilst keeping visible
clones working ok.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_allocate_preferred_size): Add more documentation
and notes on where it's appropriate to call this function.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
Clean up of parenting code (see #972)
Doc updates to section intro.
Add clutter_actor_allocate_preferred_size () utility call
* clutter/clutter-group.c: (clutter_fixed_layout_allocate):
Use clutter_actor_allocate_preferred_size ()
* doc/clutter-actor-invariants.txt:
Add some more notes
Bug #815 - Split up request, allocation, and paint box
* clutter/clutter-actor.[ch]: Rework the size allocation,
request and paint area. Now ::request_coords() is called
::allocate(), and ::query_coords() has been split into
::get_preferred_width() and ::get_preferred_height(). See
the documentation and the layout test on how to implement
a container and layout manager with the new API. (#915,
based on a patch by Havoc Pennington, Lucas Rocha and Johan
Bilien)
* clutter/clutter-clone-texture.c: Port CloneTexture to
the new size negotiation API; it just means forwarding
the requests to the parent texture.
* clutter/clutter-deprecated.h: Add deprecated and replaced
API.
* clutter/clutter-entry.c: Port Entry to the new size
negotiation API.
* clutter/clutter-group.c: Port Group to the new size
negotiation API; the semantics of the Group actor do not
change.
* clutter/clutter-label.c: Port Label to the new size
negotiation API, and vastly simplify the code.
* clutter/clutter-main.[ch]: Add API for executing a
relayout when needed.
* clutter/clutter-private.h: Add new Stage private API.
* clutter/clutter-rectangle.c: Update the get_abs_opacity()
call to get_paint_opacity().
* clutter/clutter-stage.c:
(clutter_stage_get_preferred_width),
(clutter_stage_get_preferred_height),
(clutter_stage_allocate),
(clutter_stage_class_init): Port Stage to the new size
negotiation API.
* clutter/clutter-texture.c: Port Texture to the new size
negotiation API.
* clutter/clutter-types.h: Add ClutterRequestMode enumeration.
* clutter/x11/clutter-stage-x11.c: Port the X11 stage
implementation to the new size negotiation API.
* tests/Makefile.am: Add the layout manager test case.
* tests/test-opacity.c: Update.
* tests/test-project.c: Update.
* tests/test-layout.c: Test case for a layout manager implemented
using the new size negotiation API; the layout manager handles
both transformed and untransformed children.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_get_abs_opacity): Add function that does what
get_opacity() does now...
(clutter_actor_get_opacity): ... and make get_opacity() do what
it's supposed to be doing. The original get_opacity() returned
a composited value, and there's no way to actually extract the
real opacity value set with set_opacity().
* clutter/clutter-clone-texture.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-texture.c: Update to use get_abs_opacity().
* clutter/clutter-entry.c:
* clutter/clutter-label.c: Ditto. Also, never change the stored
alpha value. (#804)
* tests/Makefile.am:
* tests/test-opacity.c: Test suite for the get_opacity() and
get_abs_opacity() API, and correct opacity handling.
* README: Add note about the change in get_opacity().
* clutter/clutter-actor.[ch]:
* clutter/clutter-types.h:
* doc/reference/clutter-docs.sgml: Fix a lot of documentation.
2008-02-15 Matthew Allum <mallum@openedhand.com>
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
(clutter_group_query_coords):
Added function to translate vertex array to a bounding box.
(clutter_actor_is_scaled):
(clutter_actor_is_rotated):
Fixed documentation.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
(clutter_actor_is_scaled):
(clutter_actor_is_rotated):
Convenience functions to test whether actor is scaled or rotated.
(clutter_actor_apply_relative_transform_to_point):
Removed unused variable.
* clutter/clutter-group.c:
(clutter_group_query_coords):
Use clutter_actor_get_relative_vertices() to calculate bounding
boxes of children that are scaled or rotated.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
(clutter_actor_get_relative_vertices):
(clutter_actor_apply_relative_transform_to_point):
Functions to calculate actor vertices in the plane of a given
ancestor.
renamed clutter_actor_apply_shader to be clutter_actor_set_shader.
Reindented/aligned header.
* clutter/clutter-texture.c: (clutter_texture_paint): temporarily
disable the shader on top of the clutter context's shader stack while
rendering into the FBO.
* tests/test-fbo.c: (main): s/apply_shader/set_shader/
* tests/test-shader.c: (button_release_cb), (main):
s/apply_shader/set_shader/
* clutter.symbols: Add clutter_actor_move_byu()
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_move_by),
(clutter_actor_move_byu): Add a units-based variant of the
clutter_actor_move_by() function
* clutter.symbols: Add clutter_actor_set_clipu() and
clutter_actor_get_clipu()
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_set_clipu), (clutter_actor_get_clipu): Add the
new units-based versions of the clip accessors
(clutter_actor_set_clip), (clutter_actor_get_clip): Reimplement
the pixels-based clip accessors as proxies for the units-based
ones
* clutter/clutter-actor.c: (clutter_actor_paint),
(clutter_actor_apply_shader): queue a redraw of actor when shader is
set.
* clutter/clutter-actor.h: indentation.
* clutter/clutter-shader.[ch]: made the fragment and vertex shader
sources properties. Report error through GError when binding shaders.
* tests/test-shader.c: modified to use newer API.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_get_sizeu),
(clutter_actor_get_positionu): Add unit-based accessors to
the size and position.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* tests/Makefile.am:
* tests/test-unproject:
(clutter_actor_transform_stage_point):
Added new function for translating stage coordinates into local
actor coordinates.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
Converted depth and rotation offsets to ClutterUnit.
(clutter_actor_set_depthu):
(clutter_actor_get_depthu):
Additional ClutterUnit API.
(_clutter_actor_apply_modelview_transform):
Use cogl_translatex() in place of cogl_translate().
* clutter/NEWS:
Started 0.6.0 section with comment on actor anchor point.
* clutter/clutter/clutter-actor.c:
* clutter/clutter/clutter-actor.h:
* clutter/clutter/clutter-behaviour-scale.c:
* clutter/clutter/clutter-deprecated.h:
(clutter_actor_set_anchor_point):
(clutter_actor_set_anchor_pointu):
(clutter_actor_get_anchor_point):
(clutter_actor_get_anchor_pointu):
(clutter_actor_set_anchor_point_from_gravity):
New anchor point API deprecating old gravity scaling, added
comments on modelview matrix construction to ClutterActor
documentation.
(clutter_actor_set_scale_with_gravity):
(clutter_actor_set_scale_with_gravityx):
Deprecated; use clutter_actor_set_anchor_point_from_gravity() instead.
* clutter.symbols: Update
* clutter/clutter-actor.h: Rename the angle argument for
set_rotationx() to avoid gtk-doc complaining
* clutter/clutter-main.h:
* clutter/clutter-main.c:
(clutter_set_motion_events_enabled): Rename for consistency
(clutter_get_motion_events_frequency),
(clutter_set_motion_events_frequency): Add accessors for the default
motion events deliver frequency.
(clutter_do_event): Throttle down motion events delivery using the
motion events frequency setting, to avoid excessive redraws. (#608)
(clutter_context_get_default): Enable per-actor motion events, at
least for now.
* tests/test-events.c (red_button_cb):
* tests/test-grab.c (green_press_cb): Update.
(clutter_actor_set_rotation): swapped axis and angle around,
the new argument order is: (axis, angle, x, y, z). Also removed
deprecated rotation functions from header.
Updated use of clutter_actor_set_rotation? in the following files:
* clutter/clutter-behaviour-rotate.c:
* clutter/clutter-effect.c:
* tests/test-actors.c:
* tests/test-project.c:
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-group.c:
* clutter/clutter-main.c:
* clutter/clutter-stage.c:
* tests/test-events.c:
Parent Actors no longer need to be set reactive for reactive
children to get events. Also makes groups now pickable.
(#597, #423)
* clutter/clutter-texture.c:
Handle case when 1x1 tiled texture is created,
falling 'back' to being non tiled. (#596)
* clutter/eglx/clutter-backend-egl.c:
Call EglTerminate on backend shutdown.
* clutter.symbols: Update exported symbols.
* clutter/clutter-actor.[ch]: Remove clutter_actor_rotate_*
and clutter_actor_get_rx* and provide a simpler rotation API:
clutter_actor_set_rotation() and clutter_actor_get_rotation().
* clutter/clutter-deprecated.h: Deprecate the old rotation API.
* clutter/clutter-behaviour-bspline.c:
* clutter/clutter-behaviour-rotate.c:
* clutter/clutter-effect.c: Update internal usage of the
rotation API.
* tests/test-project.c: Ditto as above.
* clutter/clutter-actor.[ch]: Massive API clean-ups. Initial
fixes for bugs #614 and #628.
* clutter/clutter-main.c:
* clutter/clutter-stage.c: Update internal usage of the actor
API.
* tests/test-events.c: Update test suite.
* clutter/clutter-actor.[ch]: Rename clutter_actor_get_id() to
clutter_actor_get_gid().
(clutter_actor_set_parent): Use GUINT_TO_POINTER().
* clutter/clutter-deprecated.h: Add a replacement warning for
clutter_actor_get_id().
* clutter/clutter-texture.c (texture_upload_data): Use
clutter_actor_get_gid(), and don't leak the filename string.
* clutter/clutter-actor.[ch]: Fix the declaration of the
class handlers for the ::captured-event, ::enter-event and
::leave-event signals; the function signatures were missing
the return value the signals marshallers were expecting, and
their names weren't respecting the convention for event-related
signals.
* clutter/clutter-actor.c: Implement part of the ClutterScriptable
interface, using the ClutterActor API to set and get the name
of an actor.
(clutter_geometry_copy), (clutter_geometry_free): Use
the slice allocator to avoid fragmentation when setting
properties and emitting signals (that is: when packing
boxed types into GValues).
(clutter_actor_box_copy), (clutter_actor_box_free),
(clutter_vertex_copy), (clutter_vertex_free): Ditto.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_push_transform_child),
(clutter_actor_pop_transfomr_child): Simple wrappers around
COGL API, which avoid including clutter/cogl.h when writing
container actors outside Clutter.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-private.h:
* clutter/clutter-main.c:
Add a hash to global clutter context mapping all parented actor
id's to actors.
Add clutter_get_actor_by_id() call.
Convert picking machinery to use above.
(performance/simpler composite actor creation)
* clutter/clutter-stage.c: (clutter_stage_fullscreen),
(clutter_stage_unfullscreen), (clutter_stage_event):
Only set the fullscreen property on stage state fullscreen event(#545)
Experimental as could be painful to implement on non X backends.
* clutter/clutter-actor.[ch]: Remove the ::event-after signal
class handler, as it's not meant to be overridden by sub-classes.
(clutter_actor_class_init):
Make every event-related signal return a boolean: return TRUE
in a signal handler to block the emission. The value is accumulated
automatically by the signal API.
(clutter_actor_event): If ::event returns TRUE, skip to emitting
::event-after. Return the value accumulated by the signal emission
chain.
* clutter/clutter-private.h: Rename _clutter_boolean_accumlator().
* clutter/clutter-main.c (clutter_do_event): If clutter_actor_event()
returns TRUE then stop the event emission chain from child to parent.
* clutter/clutter-stage.c (clutter_stage_event): Behave like
clutter_actor_event().
(clutter_stage_get_key_focus),
(clutter_stage_set_key_focus): Avoid a nasty circular reference
issue: if the actor passed to set_key_focus is NULL then the stage
has the key focus.
* tests/test-events.c: Update the events test with the API
changes.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-event.c:
* clutter/clutter-event.h:
* clutter/clutter-main.c:
* clutter/clutter-main.h:
* clutter/clutter-private.h:
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/clutter-types.h:
Initial implementation of actors emmitting event signals (423);
- Actors set_reactive() to receive mouse events.
(call clutter_enable_motion_events() for per action motion events)
- clutter_stage_set_key_focus () to direct key events.
- Events bubble up to parents (ending at stage)
(original source identified by clutter_event_get_source())
TODO:
- enter/leave notifys for actors.
- stage specific events - fullscreen
- grabs
* tests/test-events.c:
Extend a little to use new API
* clutter/cogl/gl/cogl.c:
* clutter/glx/clutter-backend-glx.c:
Move get_proc_address into cogl and out of backend.
(shaders will need it)
* clutter/clutter-group.c: (clutter_group_real_lower):
Fix a minor compile warning.
* TODO:
Sync up.
* clutter/clutter-actor.[ch]: Use GInitiallyUnowned
as the parent structure in the ClutterActor structure
definition; somehow, this has escaped everyone attention
in one year and a half. Luckily, GInitiallyUnowned is
as big as GObject.
(clutter_actor_get_abs_position_units),
(clutter_actor_get_abs_position): Check parameters.
* clutter/clutter-texture.h: Unmangle the flags enum
type declaration, so that dumb parsers like h2defs.py
are not fooled.
* clutter/clutter-behaviour-ellipse.[ch]:
* clutter/clutter-effect.c: Fix some documentation
issues and make gtk-doc happy.
Most of these fixes are simple symbol shadowing issues, like index and the
braindead y0 and y1 extern symbols exported by math.h on GNU libc systems.
There is a masking issue in ClutterTexture which should be checked; I ran
the tests and everything looked fine.
The rest are just unused variables.
* clutter/clutter-actor.h:
* clutter/clutter-stage.h: Add 32 padding slots; when we
reach 1.0 it'll be a long road until the following ABI
break.
* tests/test-behave.c: Don't forget to include headers.
* clutter/clutter-box.[ch]: Base class for layout containers.
* clutter/clutter-hbox.[ch]: Horizontal box actor.
* clutter/clutter-vbox.[ch]: Vertical box actor.
* clutter/clutter.h:
* clutter/Makefile.am: Build glue
* tests/Makefile.am:
* tests/test-boxes.c: Test suite for ClutterBox API and
implementations.
* clutter/clutter-backend.c:
* clutter/clutter-backend.h:
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-backend-glx.c:
Fix up rendering pipeline removing clutter_backend_XXX_stage_paint
and adding clutter_backend_XXX_redraw instead. Duplicates less
code in backends, avoids clutter_actor_paint() getting called
before stage is set up (viewport wise) and unbreaks things like
picking.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/clutter-stage.c: (clutter_stage_get_actor_at_pos):
Redo picking functionality a different way (via color indexing)
as to provide more flexibility, possibly speed and more likely
work with GL/ES (doesn't currently however - not sure why).
* clutter/clutter-group.c:
Add groups own 'pick' method.
* clutter/cogl/cogl.h:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/cogl.c:
Move clipping funtionality into cogl.
* clutter/cogl/gles/cogl-defines.h:
Hack around missing BGR format in GL/ES.
* clutter/egl/clutter-backend-egl.c:
* clutter/egl/clutter-backend-egl.h:
* clutter/egl/clutter-stage-egl.c:
* clutter/sdl/clutter-backend-sdl.c:
* clutter/sdl/clutter-backend-sdl.h:
* clutter/sdl/clutter-event-sdl.c:
* clutter/sdl/clutter-stage-sdl.c:
Update backends to newer API.
Add basic mouse event translation to SDL.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
Add new set_width/height API calls.
Tweak scaling by reseting matrix.
Make set_opactiy() take parent opacity into account.
Fix clipping.
* clutter/clutter-alpha.c:
Add more sine functionality.
* clutter/clutter-behaviour-opacity.c:
Dont make a copy of all applied actors but use a foreach()
* clutter/clutter-behaviour-scale.c:
Give correct limits to propertys.
Tweak gravity a little more.
Update docs.
:
* clutter/clutter-behaviour.c: (clutter_behaviour_remove):
Minor warning text change.
* clutter/clutter-feature.c: (clutter_feature_wait_for_vblank):
Minor dri ioctl tweak.
* clutter/clutter-label.c:
* clutter/clutter-label.h:
Add new label_full api call.
Rework part of the show/hide machinery. Allow groups sub-classes
and composite actors to override show_all/hide_all in order to
decide which children they wish to show/hide. This means that
if an actor overrides the default show/hide virtual methods, it'll
have to chain up to the parent class show/hide. While we're at it,
provide the fully recursive clutter_actor_show_all() and
clutter_actor_hide_all() methods.
* clutter/clutter-behaviour-path.c: Add apidoc for the ClutterKnot
functions; add pathological equality case for clutter_knot_equal().
* clutter/clutter-event.h:
* clutter/clutter-feature.h:
* clutter/clutter-behaviour.c:
* clutter/clutter-behaviour-scale.c:Fix parameters name so that
gtk-doc doesn't complain.
* clutter/clutter-actor.c:
* clutter/clutter-event.c: Add apidoc
* clutter/clutter-actor.h:
* clutter/clutter-actor.c: Add a clutter_actor_show_all() and a
clutter_actor_hide_all() functions; provide a mechanism for
groups and composited actors to programmatically select what to
show/hide when clutter_actor_show_all() and clutter_actor_hide_all()
are called. If you are overriding the ClutterActor::show or
the ClutterActor::hide virtual methods you should chain up with
the parent class.
* clutter/clutter-group.c: Override show_all and hide_all and
recursively show/hide every child inside the group;
clutter_group_show_all() and clutter_group_hide_all() remain as non
recursive versions of clutter_actor_show_all() and
clutter_actor_hide_all() (maybe we should rename them in order
to avoid name clashes with the bindings).
* clutter/clutter-stage.c:
* clutter/clutter-texture.c: Chain up with parent class show
and hide vfuncs.
* clutter/clutter-clone-texture.h:
* clutter/clutter-clone-texture.c: Provide API for changing the
parent texture of a clone texture actor.
* examples/behave.c:
* examples/super-oh.c:
* examples/test.c: Use clutter_actor_show_all() instead of
clutter_group_show_all().
* clutter/Makefile.am:
* clutter/clutter.h:
* clutter/clutter-version.h.in: Auto-generated versioning macros.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c: Add a ClutterActor::parent-set signal,
for notificating changes of an actor's parent; add api-doc for
the actor's properties; add the ClutterActor "name" property; clean
up a bit some functions; emit the "parent-set" signal when setting
te parent and when unparenting; better warnings when lowering
and raising an actor.
* configure.ac:
* clutter/Makefile.am: Add a --enable-debug configure option,
with three levels of debugging: no, minimum and yes; default
for development releases (odd minor version) is "yes"; update
the version m4 defines; update the libtool macros: now just
changed the clutter_interface_age when releasing will update
everything else.
* clutter/clutter-behaviour-path.h:
* clutter/clutter-behaviour-path.c: Add a "knot-reached" signal,
which is emitted when the path reaches a node in the nodes list;
flesh out the documentation a bit; sync the parameters names
so that gtk-doc doesn't complain about missing stuff.
* clutter/clutter-behaviour.h:
* clutter/clutter-behaviour.c: Add the alpha value to the
ClutterBehaviour::alpha_notify vfunc, so you don't have to
get the value from the alpha inside the behaviour implementations;
add more documentation.
* clutter/clutter-alpha.c: Flesh out the description.
* clutter/clutter-actor.h: Update the header.
* clutter/clutter-behaviour-opacity.c:
* clutter/clutter-behaviour-scale.c: Update docs.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
Add new API clutter_actor_move_by(), clutter_actor_get_size()
* clutter/clutter-alpha.c:
* clutter/clutter-alpha.h:
Add clutter alpha sine func
* clutter/clutter-behaviours.h:
* clutter/clutter-behaviours.c:
Add a basic scale behaviour (needs work)
* examples/behave.c: (main):
More playing with new behaviour functionality
* clutter/clutter-feature.c:
* clutter/clutter-feature.h:
* clutter/clutter-main.c:
Add new experimental sync to vblank code
Set env CLUTTER_VBLANK=none to disable.
* clutter/clutter-fixed.h:
Add basic fixed point utility defines and type.
* clutter/Makefile.am:
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-group.c:
* clutter/clutter-stage.c:
* examples/super-oh.c: (main):
Add scale API and functionality.
Rework group sizing. Now group size requests have no effect
but can be scaled.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_class_init), (clutter_actor_set_property),
(clutter_actor_get_property): Add the "clip" and "has-clip"
properties.
(clutter_actor_set_clip), (clutter_actor_remove_clip): Emit
the notification for the changed properties.
(clutter_actor_has_clip): Simple accessor to the "has-clip"
property.
Big rework of the actor management semantics: now ClutterActor
objects behave like GtkObjects - that is they have an initial
"floating" reference that gets "sunk" when they are added to
a ClutterGroup. This makes a group responsible of de-allocating
each actor inside it, so you just have to destroy the group to
get every child actor destroyed. Also, now you can do:
clutter_group_add (group, clutter_video_texture_new ());
without having to care about reference counting and explicit
unreffing.
* clutter/clutter-private.h: Add private flags setter and
getter macros.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c: Clean up; inherit from GInitiallyUnowned;
add a "visible" property; add the "destroy", "show" and "hide"
signals to ClutterActorClass.
(clutter_actor_show), (clutter_actor_hide): Refactor a bit; emit
the "show" and "hide" signals.
(clutter_actor_set_property), (clutter_actor_get_property),
(clutter_actor_class_init): Implement the "visible" property; add
signals.
(clutter_actor_finalize): Do not leak the actor's name, if it is
set.
(clutter_actor_dispose): Emit the "destroy" signal here.
(clutter_actor_init): Sink the initial floating flag if needed.
(clutter_actor_destroy): Add a function to explicitely destroy
a ClutterActor.
(clutter_actor_set_parent), (clutter_actor_get_parent),
(clutter_actor_unparent): Make set_parent require a valid parent;
add unparent; check on get_parent; ref_sink the actor when
setting its parent and unref it when unsetting it. Probably we'll
need a function that does reparenting as unparent+set_parent in
a single shot.
* clutter/clutter-group.h:
* clutter/clutter-group.c (clutter_group_dispose),
(clutter_group_finalize), (clutter_group_add),
(clutter_group_remove): Make the group destroy its children when
disposing it; clean up, and use the newly-available
clutter_actor_unparent().
* clutter/clutter-stage.h:
* clutter/clutter-stage.c (clutter_stage_init): ClutterStage is
a top-level actor; clean up.
* clutter/clutter-video-texture.h:
* clutter/clutter-video-texture.c: Clean up.
* examples/super-oh.c:
* examples/test.c:
* examples/video-player.c:
* examples/test-text.c:
* examples/video-cube.c: Remove the g_object_unref() call, as the
ClutterStage object is destroyed on clutter_main_quit().
* clutter/clutter-timeline.h:
* clutter/clutter-timeline.c: Add a "started" and a "paused"
signals; add more sanity checks on the public functions.
(clutter_timeline_get_loop): Add a getter function for the
loop property.
* clutter/clutter-marshal.list: Add marshallers.
* clutter/clutter-timeline.h:
* clutter/clutter-actor.h: Add padding for future expansion
without breaking ABI.
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
Add clutter_stage_set_xwindow_foreign() call
* clutter/clutter-util.c:
* clutter/clutter-util.h:
Add some X error traps
* examples/super-oh.c:
Toy with us of new clutter_stage_set_xwindow_foreign() for
optional screensaver functionality.
