cogl_framebuffer_discard_buffers required that the color buffer is
passed, although users might want to discard e.g. just depth and/or
stencil buffers.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2091>
When sysprof-4 and libsysprof-capture-4 are installed into different
prefixes, such as with Nix package manager, the D-Bus interfaces
are likely not discoverable from the latter package.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2572>
OpenGL requires more hand holding in the driver regarding what pixel
memory layouts can be written when calling glReadPixels(), compared to
GLES2. Lets move the details of this logic to the corresponding
backends, so in the future, the GLES2 backend can be adapted to handle
more formats, without placing that logic in the generic layer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2461>
COGL_PIXEL_FORMAT_ABGR_2101010 is defined to mean the 2 A bits are
placed in a 32 bit unsigned integer on the bits with highest
significance, followed by B on the following 10 bits, and so on, until R
on the 10 least significant bits.
UNSIGNED_INT_2_10_10_10_REV_EXT is defined to represent color channels
as
```
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
-------------------------------------------------------------------------------------
| a | b | g | r |
-------------------------------------------------------------------------------------
```
As can be seen, this matches COGL_PIXEL_FORMAT_ABGR_2101010, meaning
that's the format we can directly read and write.
In Cogl, when finding the GL formats, we get the tuple with the GL
format given the format we pass, but we also get returned "required
format" (CoglPixelFormat). This required format represents the format
that is required when reading actual pixels from GLES. In GLES, the
above mentioned format is the only one supported by the
EXT_texture_type_2_10_10_10_REV extension, thus for other types, we need
to do the CPU side conversion ourselves. To achieve this, correctly
return COGL_PIXEL_FORMAT_ABGR_2101010 as the required format.
The internal format should also be GL_RGB10_A2, not GL_RGBA.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2461>
Unused since https://gitlab.gnome.org/GNOME/mutter/merge_requests/932
AFAICT.
As a bonus, gets rid of these compiler warnings:
../cogl/cogl/cogl-pipeline-layer-state.c: In function ‘cogl_pipeline_get_layer_min_filter’:
../cogl/cogl/cogl-pipeline-layer-state.c:1279:10: warning: ‘min_filter’ may be used uninitialized [-Wmaybe-uninitialized]
1279 | return min_filter;
| ^~~~~~~~~~
../cogl/cogl/cogl-pipeline-layer-state.c:1274:22: note: ‘min_filter’ was declared here
1274 | CoglPipelineFilter min_filter;
| ^~~~~~~~~~
../cogl/cogl/cogl-pipeline-layer-state.c: In function ‘cogl_pipeline_get_layer_mag_filter’:
../cogl/cogl/cogl-pipeline-layer-state.c:1291:10: warning: ‘mag_filter’ may be used uninitialized [-Wmaybe-uninitialized]
1291 | return mag_filter;
| ^~~~~~~~~~
../cogl/cogl/cogl-pipeline-layer-state.c:1287:22: note: ‘mag_filter’ was declared here
1287 | CoglPipelineFilter mag_filter;
| ^~~~~~~~~~
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2757>
Both the fragend and vertend shader state was called
"CoglPipelineShaderState", which was rather annoying, especially when
the type needs to be exposed outside of the .c file as part of moving
out unit tests. Make the types unique. This also avoids confusing what
type one is looking at.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2555>
It consists of only a macro and build description logic.
Adds a macro for simpler tests that doesn't require a context; unit
tests requiring a context should use the same framework as conform
tests.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2555>
All working tests have already migrated to the test suite using mutter;
move the old unported tests over too, and remove the conform test
framework, as it is no longer used.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2555>
They're just typedefs to CoglObject and CoglObjectClass, respectively,
and the latter is unused already. The former is used in a couple of
deprecated headers, which can easily be changed.
Change all CoglHandleObject instances to CoglObject, and drop the types
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2355>
There is no need to make CoglJournal a CoglObject, nor any kind of
object for that matter, since it doesn't require refcounting at all.
CoglJournal is entirely private to, and managed by, CoglFramebuffer,
and it only needs to create and destroy it.
Make CoglJournal a free-form struct, and adjust CoglFramebuffer to
call _cogl_journal_free() instead of cogl_object_unref().
Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/2087
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2355>
DMA buffers might be allocatable, but it doesn't mean the driver doesn't
fail when we try to allocate a buffer with an implicit modifier. Using
the proprietary NVIDIA driver for example, it will fail. Lets catch this
up front and avoid advertising DMA buffer support when we know it won't
work.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2383>
Previously, we would only check for EXT_swap_buffers_with_damage which
generally will find an implementation. However, some EGL implementations
do not appear to support that naming of the extension, preferring to
only advertise KHR_swap_buffers_with_damage.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2316>
Returns TRUE if the active renderer backend can allocate DMA buffers.
This is the case hardware accelerated GBM backends, but FALSE for
surfaceless (i.e. no render node) and EGLDevice (legacy NVIDIA paths).
While software based gbm devices can allocate DMA buffers, we don't want
to allocate them for offscreen rendering, as we really only use these
for inter process transfers, and as buffers allocated for scanout
doesn't use the relevant API, making it return FALSE for these solves
that.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1939>
Because both code paths require the existence of `GL_TIMESTAMP[_EXT]`
which is only guaranteed if `ARB_timer_query` (included in GL core 3.3)
is implemented.
We know when that is true because `context->glGenQueries` and
`context->glQueryCounter` are non-NULL. So that is the minimum
requirement for any use of `GL_TIMESTAMP`, even when it is used in
`glGetInteger64v`.
Until now, Raspberry Pi (OpenGL 2.1) would find a working implementation
of `glGetInteger64v` but failed to check whether the driver understands
`GL_TIMESTAMP` (it doesn't).
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2107
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2253>
When Cogl gained support for importing pixmaps, I think there was a
misunderstanding that there is a difference in how it works in GLX and
EGL where GLX needs to rebind the pixmap in order to guarantee that
changes are reflected in the texture after it detects damage, whereas
with EGL it doesn’t. The GLX spec makes it pretty clear that it does
need to rebind whereas the EGL spec is a bit harder to follow. As a
fallout from Mesa MR 12869, it seems like the compositor really does
need to rebind the image to comply with the spec. Notably, in
OES_EGL_image_external there is:
"Binding (or re-binding if already bound) an external texture by calling
BindTexture after all modifications are complete guarantees that
sampling done in future draw calls will return values corresponding to
the values in the buffer at or after the time that BindTexture is
called."
So this commit changes the x11_damage_notify handler for EGL to lazily
queue a rebind like GLX does. The code that binds the image while
allocating the texture has been moved into a reusable helper function.
It seems like there is a bit of a layering violation when accessing the
GL driver internals from the EGL winsys code, but I noticed that the GLX
code also includes the driver GL headers and otherwise it seems pretty
tricky to do properly.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2062>
Because POSIX sh was, with hindsight, not a particularly well-designed
programming language, if we don't 'set -e', then we'll respond to failure
of a setup command such as cd by carrying on regardless.
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2009>
The assumption here seems to be that it's an overlay onto the
current environment which would make sense; but the implementation in
gnome-desktop-testing currently removes all other environment variables
(see GNOME/gnome-desktop-testing#1). This causes test failure when the
tests are run in Debian's autopkgtest framework, possibly because PATH
is cleared.
Signed-off-by: Simon McVittie <smcv@debian.org>
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2009>
Add support for a cogl function to set the damage_region on an onscreen
framebuffer.
The goal of this is to enable using the EGL_KHR_partial_update extension
which can potentially reduce memory bandwidth usage by some GPUs,
particularly on embedded GPUs that operate on a tiling rendering model.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2023>
These match their alpha counterparts, apart from not setting the
alpha bit. This allows our internal mashinery to more easily
distinguish whether we need a slow alpha-pass during rendering or not.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1810>
These match their alpha counterparts, apart from not setting the
alpha bit. This allows our internal mashinery to more easily
distinguish whether we need a slow alpha-pass during rendering or not.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1810>
Using "framebuffer_discard" in the list refers to an invalid extension.
The extension which introduces glDiscardFramebufferEXT is
"GL_EXT_discard_framebuffer".
With this fix, cogl_gl_framebuffer_fbo_discard_buffers can actually call
glDiscardFramebufferEXT.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1974>
A trace "anchor" is a trace head (CoglTraceHead) that is placed in a
certain scope (e.g. function scope), but then only triggered in another
scope, e.g. a condition.
This makes it possible to have optional trace instrumentation, that is
enabled only given e.g. a debug flag.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1700>
Seems glGetString(GL_RENDERER) in the wild can return NULL, causing
issues with strstr(). Handle this more gracefully by using
g_return_val_if_fail(), that assumes a NULL renderer means software
rendering.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1931>
Add utilities that allow getting the current GPU timestamp and creating
a query which completes upon completion of all operations currently
submitted on a framebuffer. Combined, these two allow measuring how long
it took the GPU to finish rendering something to a framebuffer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1762>
We need to call eglBindAPI() with GLES before we setup the secondary
GPU blit. We've been lucky not really needing this, as it has been
GLES default, which is what the secondary blit uses, in order to not
depend on the default, or if we want to create the secondary blit
objects after initializing cogl, we must make sure to bind the right API
at the right time.
As we need to bind the GLES API when setting up the secondary blit, we
need to make sure that cogl gets the right API bound when that's done,
so Cogl can continue working. For this, add a "bind_api()" method on the
CoglRenderer object, that will know what API is correct to bind.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1828>
Just like we do on EGL. Two bits are required because
`cogl-clip-stack-gl.c` needs each stencil buffer element to be able to
count from 0 to 2.
This mistake probably went unnoticed because:
* Drivers usually provide more than 1 anyway; and
* Optimizations in `cogl-clip-stack-gl.c` avoid calling the code that
needs to count past 1 in most cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1873>
Previously we were using a mask of 0x1 for the lifetime of the stencil.
This was wrong for two reasons:
* The intersection algorithm needs to count up to a maximum 2, so a
mask of 1 would clamp to 1 instead. Then decrementing all pixels
resulted in all pixels being zero even though we want some to be 1.
So the stencil then blocked some color buffer pixels being rendered.
* The lifetime of the mask was too long. By leaving it non-zero at
the end of the function we could accidentally end up modifying the
stencil contents during our later color buffer paints.
This fixes faulty rendering of some actors seen in gnome-shell with
test case: `env COGL_DEBUG=stencilling`
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1873>
Previously we were using a mask of 0x1 for the lifetime of the stencil.
This was wrong for two reasons:
* The intersection algorithm needs to count up to a maximum 2, so a
mask of 1 would clamp to 1 instead. Then decrementing all pixels
resulted in all pixels being zero even though we want some to be 1.
So the stencil then blocked some color buffer pixels being rendered.
* The lifetime of the mask was too long. By leaving it non-zero at
the end of the function we could accidentally end up modifying the
stencil contents during our later color buffer paints.
This fixes missing rendering of some actors seen in gnome-shell with
test case: `env COGL_DEBUG=stencilling CLUTTER_PAINT=disable-clipped-redraws`
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1873>
The cogl tests need to run with a display server set, however since we
use TestEnvironment, only the listed env variables will be exposed to
the test and so no DISPLAY will be set when launching it with
gnome-desktop-testing-runner.
As per this, just run the tests using xvfb-run so that we match what's
happening in CI and we ensure that the tests are run in a safe
environment.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1876>
As documented in g_once_init_enter(): "While @location has a volatile qualifier,
this is a historical artifact and the pointer passed to it should not be
volatile.". And effectively this now warns with modern glibc.
Drop the "volatile" qualifier from these static variables as it's expected.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1785>
This concerns only the cases when the presentation timestamp is received
directly from the device (from KMS or from GLX). In the majority of
cases this timestamp is already MONOTONIC. When it isn't, after this
commit, the current value of the MONOTONIC clock is sampled instead.
The alternative is to store the clock id alongside the timestamp, with
possible values of MONOTONIC, REALTIME (from KMS) and GETTIMEOFDAY (from
GLX; this might be the same as REALTIME, I'm not sure), and then
"convert" the timestamp to MONOTONIC when needed. An example of such a
conversion was done in compositor.c (removed in this commit). It would
also be needed for the presentation-time Wayland protocol. However, it
seems that the vast majority of up-to-date systems are using MONOTONIC
anyway, making this effort not justified.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
KMS and GLX device timestamps have microsecond precision, and whenever
we sample the time ourselves it's not the real presentation time anyway,
so nanosecond precision for that case is unnecessary.
The presentation timestamp in ClutterFrameInfo is in microseconds, too,
so this commit makes them have the same precision.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
A flag indicating whether the presentation timestamp was provided by the
display hardware (rather than sampled in user space).
It will be used for the presentation-time Wayland protocol.
This is definitely the case for page_flip_handler(), and I'm assuming
this is also the case for the two instances in the GLX code.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1484>
d42f1873fc introduced a semi circular
reference between the CoglFramebuffer, and CoglJournal, where
CoglJournal would keep a reference on the CoglFramebuffer when there
were any entries in the journal log.
To avoid risking leaking these objects indefinitely, when freeing
objects without doing anything that triggered a flush, CoglFramebuffer
had a "filter" on cogl_object_unref() calls, which knew
about under what conditions CoglJournal had a reference to it. When it
could detect that there were only the journal itself holding such a
reference, it'd flush the journal, effectively releasing the reference
the journal held, thus freeing itself, as well as the journal.
When CoglFramebuffer was ported to be implemented using GObject instead
of CoglObject, this "filter" was missed, causing not only awkward but
infrequent leaks, but also situations where we'd flush journals when
only the journal itself held the last reference to the framebuffer,
meaning the journal would free the framebuffer, thus itself, in the
middle of flushing, causing memory corruption and crashes.
A way to detect this, by asserting on CoglObject reference count during
flush, is by adding the `g_assert()` as described below, which will
assert instead cause memory corruption.
void
_cogl_journal_flush (CoglJournal *journal
{
...
_cogl_journal_discard (journal);
+ g_assert (journal->_parent.ref_count > 0);
...
}
Fix this by making CoglFramebuffer the owner of the journal, which it
already was, and remove any circle referencing that was there before, as
it is not needed given that the CoglFramebuffer pointer is guaranteed to
be valid for the lifetime of CoglJournal as the framebuffer is the owner
of the journal.
However, to not miss flushing before tearing down, which is important as
this flushes painting calls to the driver that is important for e.g.
using the result of those journal entries, flush the journal the first
time cogl_framebuffer_dispose() is called, before doing anything else.
This also adds a test case. Without having broken the circular
reference, the test would fail on g_assert_null (offscreen), as it would
have been "leaked" at this point, but the actual memory corruption would
be a result of the `cogl_texture_get_data()` call, which flushes the
framebuffer, and causes the 'mid-flush' destruction of the journal
described above. Note that the texture keeps track of dependent
framebuffers, but it does not hold any references to them.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1474
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1735>
It's currently only handled by a surface backend framebuffer (assuming
the right GLX extensions are available). While it's theoretically
possible to do the same with the offcreen by having multiple textures,
it's not supported, so leave the FBO variant with a single warning if we
end up there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The object was still pretending to be CoglFramebuffer itself, by using
naming and calling conventions making it seem like that. Fix that by
passing around the driver instead of the framebuffer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Mutter needs to fetch the X11 Window ID from the onscreen and did that
by using an X11 specific API on the CoglOnscreen, where the X11 type was
"expanded" (Window -> uint32_t). Change this by introducing an interface
called CoglX11Onscreen, implemented by both the Xlib and GLX onscreen
implementations, that keeps the right type (Window), while avoiding X11
specific API for CoglOnscreen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Mutter didn't use the APIs for resizeability of CoglOnscreens but
managed the size itself. For the native backend we don't ever resize
onscreens. Thus, remove this unused functionality.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The framebuffer driver was lazilly initialized on demand in some cases
(onscreen), and up front other (offscreen). Replace this with a more
predictable up front initialization, done at framebuffer allocation.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The CoglGLFramebuffer (not CoglGlFramebuffer) is a private struct for
keeping track of the framebuffer object. To avoid confusing with
CoglGlFramebuffer, rename it CoglGlFbo.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
This way we can have separate types per modes of operation (e.g. if it's
backed by an EGLSurface or single texture), instead of being dependent
on a certain type (onscreen vs offscreen).
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Instead of calling "init_onscreen()" on two different separate vtables
from the allocate() funtion, just have the CoglOnscreen sub types
themself implement allocate() and initialize in there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
Thins means that e.g. MetaOnscreenNative now inherits CoglOnscreenEgl,
which inherits CoglOnscreen which inherits CoglFramebuffer, all being
the same GObject instance.
This makes it necessary to the one creating the onscreen to know what it
wants to create. For the X11 backend, the type of renderer (Xlib EGL or
GLX) determines the type, and for the native backend, it's currently
always MetaOnscreenNative.
The "winsys" vfunc entries related to onscreens hasn't been moved yet,
that will come later.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The mutter naming convention for types and their instance variables is:
Type name:
[Namespace][BaseName][SubType]
Instance name:
[base_name]_[sub_type]
This means that e.g. CoglOnscreenGLX is renamed CoglOnscreenGlx, and
glx_onscreen is renamed onscreen_glx. This is in preparation for
GObjectification.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The GLX winsys code had split up the GLX onscreen implementation into an
Xlib part (with a struct name confusingly enough identical to that of
the onscreen in the actual Xlib winsys). To remove some confusion,
combine the two.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
