This splits out most of the OpenGL specific code from cogl-framebuffer.c
into cogl-framebuffer-gl.c and extends the CoglDriverVtable interface
for cogl-framebuffer.c to use.
There are hopes to support several different backends for Cogl
eventually to hopefully get us closer to the metal so this makes some
progress in organizing which parts of Cogl are OpenGL specific so these
parts can potentially be switched out later.
The only remaining use of OpenGL still in cogl-framebuffer.c is to
handle cogl_framebuffer_read_pixels.
This commit introduces some new framebuffer api to be able to
enable texture based depth buffers for a framebuffer (currently
only supported for offscreen framebuffers) and once allocated
to be able to retrieve the depth buffer as a texture for further
usage, say, to implement shadow mapping.
The API works as follow:
* Before the framebuffer is allocated, you can request that a depth
texture is created with
cogl_framebuffer_set_depth_texture_enabled()
* cogl_framebuffer_get_depth_texture() can then be used to grab a
CoglTexture once the framebuffer has been allocated.
We want applications to fully control the lifetime of a CoglContext
without having to worry that internal resources (such as the default
2d,3d and rectangle textures, or any caches we maintain) could result in
circular references that keep the context alive. We also want to avoid
making CoglContext into a special kind of object that isn't ref-counted
or that can't be used with object apis such as
cogl_object_set_user_data. Being able to reliably destroy the context is
important on platforms such as Android where you may be required
bring-up and tear-down a CoglContext numerous times throughout the
applications lifetime. A dissadvantage of this policy is that it is now
possible to leave other object such as framebuffers in an inconsistent
state if the context is unreferenced and destroyed. The documentation
states that all objects that directly or indirectly depend on a context
that has been destroyed will be left in an inconsistent state and must
not be accessed thereafter. Applications (such as Android applications)
that need to cleanly destroy and re-create Cogl resources should make
sure to manually unref these dependant objects before destroying the
context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 23ce51beba1bb739a224e47614a59327dfbb65af)
There are two extensions, GL_OES_packed_depth_stencil and
GL_EXT_packed_depth_stencil, that inform us that the hardware supports
packing the depth and stencil values together into one format.
The OES extension is the GLES equivalent of the EXT extension and the
two extensions provide the same enums with basically the same semantics,
except that the EXT extension is a lot more wordy due to a larger number
of features in the full OpenGL api and the OES extension has some
asymmetric limitations on when the GL_DEPTH_STENCIL and
GL_DEPTH24_STENCIL8 enums can be used as internal formats.
GL_OES_packed_depth_stencil doesn't allow the GL_DEPTH_STENCIL enum
to be passed to glRenderbufferStorage (GL_DEPTH24_STENCIL8 should be
used instead) and GL_OES_packed_depth_stencil doesn't allow
GL_DEPTH24_STENCIL8 to be passed as an internal format to glTexImage2D.
We had been handling the two extensions differently in Cogl by calling
try_creating_fbo with different flags depending on whether the OES or
EXT extension was available and passing GL_DEPTH_STENCIL to
glRenderbufferStorage when we have the EXT extension or
GL_DEPTH24_STENCIL8 with the OES extension.
To localize the code that deals with the differences between the
extensions this patch does away with the need for separate flags
so we now just have COGL_OFFSCREEN_ALLOCATE_FLAG_DEPTH_DEPTH_STENCIL and
right before calling glRenderbufferStorage we check which extension we
are using to decide whether to use the GL_DEPTH_STENCIL or
GL_DEPTH24_STENCIL8 enums.
(cherry picked from commit 88a05fac6609f88c0f46d9df2611d9fbaf159939)
If a primitive is already line based then we don't need to do anything
special to draw it in wireframe mode.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit fb575a42c308739a7185311a613b1a5f49dbfb39)
cogl_framebuffer_set_{projection,modelview}_matrix don't need to read
from the matrix argument so they should probably take a const pointer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 710d6af053aca97935b54f9ff68858ef51f4482b)
Otherwise, if a texture is created before all the other FBOs, a new
atlas will be created, with a FBO with COGL_OFFSCREEN_DISABLE_DEPTH_AND_STENCIL
causing last_offscreen_allocate_flags to be 0.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7d2156785da8196e129eb393efb0d09093c4783e)
When rendering the debug wireframe Cogl generates a child pipeline of
the application's pipeline to replace the fragment processing.
Previously it was creating a new snippet every time something was
drawn. Cogl doesn't attempt to compare the contents of snippets when
looking in the program cache for a matching pipeline so this would
cause it to generate a new program for every primitive. It then quite
quickly ends printing the warning about there being more than 50
programs in the cache. To fix that this patch makes it cache the
snippet so that Cogl can successfully recognise that it already has a
program generated for the new pipeline.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit c4bb08ee8767b5320980dba10b20921393cb5613)
Previously the CoglDrawFlags passed to
_cogl_framebuffer_draw_indexed_attributes when drawing is redirected
to draw a wireframe are overriden to avoid validating the pipeline,
flushing the framebuffer state and flushing the journal. This ends up
breaking scenes that only contain models drawn from attributes in the
application because nothing will flush the matrices. It seems to make
more sense to just use whatever draw flags were passed from the
original draw command so that it will flush the matrices if the caller
was expecting it.
One problem with this is that if the wireframe causes the journal to
be flushed then it will already have temporarily disabled the
wireframe debug flag so the journal will not be drawn with wireframes.
To fix this the patch adds a CoglDrawFlag to disable the wireframe and
uses that instead of disabling the debug flag.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 283f6733e63ba65d9921f45868edaabbd9420a61)
This adds the following new functions to apply a rotation described by
a euler or a quaternion to either a CoglMatrix or directly to the
modelview stack of a framebuffer:
cogl_matrix_rotate_quaternion
cogl_matrix_rotate_euler
cogl_framebuffer_rotate_quaternion
cogl_framebuffer_rotate_euler
The direct framebuffer functions have corresponding functions in the
CoglMatrixStack to store an entry describing the rotation.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5064315678b496395e1d01f266f322d73e55e324)
When --disable-debug is passed to the configure script it was actually
still defining COGL_ENABLE_DEBUG so very little would end up being
disabled. If COGL_ENABLE_DEBUG actually got defined it would also fail
to compile because _cogl_debug_instances and COGL_DEBUG_N_LONGS from
cogl-debug.h were only defined if debugging is enabled but they are
used regardless.
This patch also makes it so that the _COGL_RETURN_IF_FAIL family of
macros that are used when glib support is disabled are now disabled if
debugging is disabled. When the glib macros are used they are already
disabled because we additionally define G_DISABLE_CHECKS.
'COGL_HANDLE_DEBUG' has been removed from the list of defines passed
when debugging is enabled because CoglHandle has already been removed
and it is not used anywhere in the code.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 9811a0101c9cbb4ab95c55a2b41fd10ff4c77d9f)
This makes it possible to integrate existing GLES2 code with
applications using Cogl as the rendering api.
Currently all GLES2 usage is handled with separate GLES2 contexts to
ensure that GLES2 api usage doesn't interfere with Cogl's own use of
OpenGL[ES]. The api has been designed though so we can provide tighter
integration later.
The api would allow us to support GLES2 virtualized on top of an
OpenGL/GLX driver as well as GLES2 virtualized on the core rendering api
of Cogl itself. Virtualizing the GLES2 support on Cogl will allow us to
take advantage of Cogl debugging facilities as well as let us optimize
the cost of allocating multiple GLES2 contexts and switching between
them which can both be very expensive with many drivers.
As as a side effect of this patch Cogl can also now be used as a
portable window system binding API for GLES2 as an alternative to EGL.
Parts of this patch are based on work done by Tomeu Vizoso
<tomeu.vizoso@collabora.com> who did the first iteration of adding GLES2
API support to Cogl so that WebGL support could be added to
webkit-clutter.
This patch adds a very minimal cogl-gles2-context example that shows how
to create a gles2 context, clear the screen to a random color and also
draw a triangle with the cogl api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 4bb6eff3dbd50d8fef7d6bdbed55c5aaa70036a8)
This re-designs the matrix stack so we now keep track of each separate
operation such as rotating, scaling, translating and multiplying as
immutable, ref-counted nodes in a graph.
Being a "graph" here means that different transformations composed of
a sequence of linked operation nodes may share nodes.
The first node in a matrix-stack is always a LOAD_IDENTITY operation.
As an example consider if an application where to draw three rectangles
A, B and C something like this:
cogl_framebuffer_scale (fb, 2, 2, 2);
cogl_framebuffer_push_matrix(fb);
cogl_framebuffer_translate (fb, 10, 0, 0);
cogl_framebuffer_push_matrix(fb);
cogl_framebuffer_rotate (fb, 45, 0, 0, 1);
cogl_framebuffer_draw_rectangle (...); /* A */
cogl_framebuffer_pop_matrix(fb);
cogl_framebuffer_draw_rectangle (...); /* B */
cogl_framebuffer_pop_matrix(fb);
cogl_framebuffer_push_matrix(fb);
cogl_framebuffer_set_modelview_matrix (fb, &mv);
cogl_framebuffer_draw_rectangle (...); /* C */
cogl_framebuffer_pop_matrix(fb);
That would result in a graph of nodes like this:
LOAD_IDENTITY
|
SCALE
/ \
SAVE LOAD
| |
TRANSLATE RECTANGLE(C)
| \
SAVE RECTANGLE(B)
|
ROTATE
|
RECTANGLE(A)
Each push adds a SAVE operation which serves as a marker to rewind too
when a corresponding pop is issued and also each SAVE node may also
store a cached matrix representing the composition of all its ancestor
nodes. This means if we repeatedly need to resolve a real CoglMatrix
for a given node then we don't need to repeat the composition.
Some advantages of this design are:
- A single pointer to any node in the graph can now represent a
complete, immutable transformation that can be logged for example
into a journal. Previously we were storing a full CoglMatrix in
each journal entry which is 16 floats for the matrix itself as well
as space for flags and another 16 floats for possibly storing a
cache of the inverse. This means that we significantly reduce
the size of the journal when drawing lots of primitives and we also
avoid copying over 128 bytes per entry.
- It becomes much cheaper to check for equality. In cases where some
(unlikely) false negatives are allowed simply comparing the pointers
of two matrix stack graph entries is enough. Previously we would use
memcmp() to compare matrices.
- It becomes easier to do comparisons of transformations. By looking
for the common ancestry between nodes we can determine the operations
that differentiate the transforms and use those to gain a high level
understanding of the differences. For example we use this in the
journal to be able to efficiently determine when two rectangle
transforms only differ by some translation so that we can perform
software clipping.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
The existing functions for stroking and filling a path depend on the
global framebuffer and source stacks. These are now replaced with
cogl_framebuffer_{stroke,fill}_path which get explicitly passed the
framebuffer and pipeline.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 713a8f8160bc5884b091c69eb7a84b069e0950e6)
The coding style has for a long time said to avoid using redundant glib
data types such as gint or gchar etc because we feel that they make the
code look unnecessarily foreign to developers coming from outside of the
Gnome developer community.
Note: When we tried to find the historical rationale for the types we
just found that they were apparently only added for consistent syntax
highlighting which didn't seem that compelling.
Up until now we have been continuing to use some of the platform
specific type such as gint{8,16,32,64} and gsize but this patch switches
us over to using the standard c99 equivalents instead so we can further
ensure that our code looks familiar to the widest range of C developers
who might potentially contribute to Cogl.
So instead of using the gint{8,16,32,64} and guint{8,16,32,64} types this
switches all Cogl code to instead use the int{8,16,32,64}_t and
uint{8,16,32,64}_t c99 types instead.
Instead of gsize we now use size_t
For now we are not going to use the c99 _Bool type and instead we have
introduced a new CoglBool type to use instead of gboolean.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 5967dad2400d32ca6319cef6cb572e81bf2c15f0)
Removing CoglHandle has been an on going goal for quite a long time now
and finally this patch removes the last remaining uses of the CoglHandle
type and the cogl_handle_ apis.
Since the big remaining users of CoglHandle were the cogl_program_ and
cogl_shader_ apis which have replaced with the CoglSnippets api this
patch removes both of these apis.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 6ed3aaf4be21d605a1ed3176b3ea825933f85cf0)
Since the original patch was done after removing deprecated API
this back ported patch doesn't affect deprecated API and so
actually this cherry-pick doesn't remove all remaining use of
CoglHandle as it did for the master branch of Cogl.
Mesa before version 8.0.2 has a slow read pixels path that gets used
with the Intel driver where it converts all of the pixels into a
floating point representation and back even if the data is being read
into exactly the same format. There is however a faster path using the
blitter when reading into a PBO with BGRA format. It works out faster
to read into a PBO and then memcpy back out into the application's
buffer even though it adds an extra memcpy. This patch adds a
workaround in cogl_framebuffer_read_pixels_into_bitmap when it detects
this situation. In that case it will create a temporary CoglBitmap
using cogl_bitmap_new_with_size, read into it and then memcpy the data
back out.
The main impetus for this patch is that Gnome Shell has implemented
this workaround directly using GL calls but it seems like the kind of
thing that would sit better at the Cogl layer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The Intel driver currently has an optimisation when calling
glReadPixels into a PBO so that it will use a blit instead of the Mesa
fallback path. However this only works if the GL_PACK_ALIGNMENT is
exactly 1, even if this would be equivalent to a higher alignment
value because the bpp*width is already aligned. To make it more likely
to hit this fast path, we now detect this situation and explicitly use
an alignment of 1. To make this work the texture driver needs to be
passed down the bpp*width as well as the rowstride when configuring
the alignment.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
get_texture_bits_via_offscreen does not check the return value of
cogl_framebuffer_read_pixels_into_bitmap which results into never
using the fallback path texture_get_cb.
cogl_framebuffer_read_pixels_into_bitmap does not check whether the framebuffer
is properly allocated though; so fix that as well.
https://bugzilla.gnome.org/show_bug.cgi?id=673137
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Cogl already had a vtable for the texture driver. This ended up being
used for some things that are not strictly related to texturing such
as converting between pixel formats and GL enums. Some other functions
that are driver dependent such as updating the features were not
indirected through a vtable but instead switched directly by looking
at the ctx->driver enum value. This patch normalises to the two uses
by adding a separate vtable for driver functions not related to
texturing and moves the pixel format conversion functions to it from
the texture driver vtable. It also adds a context parameter to all of
the functions in the new driver vtable so that they won't have to rely
on the global context.
This adds experimental 2.0 api replacements for the cogl_rectangle[_*]
functions that don't depend on having a current pipeline set on the
context via cogl_{set,push}_source() or having a current framebuffer set
on the context via cogl_push_framebuffer(). The aim for 2.0 is to switch
away from having a statefull context that affects drawing to having
framebuffer drawing apis that are explicitly passed a framebuffer and
pipeline.
To test this change several of the conformance tests were updated to use
this api instead of cogl_rectangle and
cogl_rectangle_with_texture_coords. Since it's quite laborious going
through all of the conformance tests the opportunity was taken to make
other clean ups in the conformance tests to replace other uses of
1.x api with experimental 2.0 api so long as that didn't affect what was
being tested.
This adds a public convenience wrapper around
cogl_framebuffer_read_pixels_into_bitmap which allocates a temporary
CoglBitmap to read into the application's own buffer. This can only be
used for the 99% common case where the rowstride is exactly the
bpp*width and the source is the color buffer.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously when adding a quad to the journal it would assume the
journal belongs to the framebuffer at the top of the framebuffer stack
and store a reference to that. We eventually want to get rid of the
framebuffer stack so we should avoid using it here. The journal now
takes a pointer back to the framebuffer in its constructor and it
always retains the pointer. As was done previously, the journal still
does not take a reference on the framebuffer unless it is non-empty so
it does not create a permanent circular reference.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This creates a CoglBitmap which points into an existing buffer in
system memory. That way it can be used to create a texture or to read
pixel data into. The function replaces the existing internal function
_cogl_bitmap_new_from_data but removes the destroy notify call back.
If the application wants notification of destruction it can just use
the cogl_object_set_user_data function as normal. Internally there is
now a convenience function to create a bitmap for system memory and
automatically free the buffer using that mechanism.
The name of the function is inspired by
cairo_image_surface_create_for_data which has similar semantics.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The if-undefined fallback declaration for GL_PACK_INVERT_MESA was
originally added in cogl.c along with code to use it (as part of commit
6f79eb8a5a). Later on, commit
10a38bb14f moved the code that used it to
cogl-framebuffer.c but didn't move the define along with it. Do that
now.
https://bugzilla.gnome.org/show_bug.cgi?id=672038
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This option to GCC makes it give a warning whenever a global function
is defined without a declaration. This should catch cases were we've
defined a function but forgot to put it in a header. In that case it
is either only used within one file so we should make it static or we
should declare it in a header.
The following changes where made to fix problems:
• Some functions were made static
• cogl-path.h (the one containing the 1.0 API) was split into two
files, one defining the functions and one defining the enums so that
cogl-path.c can include the enum and function declarations from the
2.0 API as well as the function declarations from the 1.0 API.
• cogl2-clip-state has been removed. This only had one experimental
function called cogl_clip_push_from_path but as this is unstable we
might as well remove it favour of the equivalent cogl_framebuffer_*
API.
• The GLX, SDL and WGL winsys's now have a private header to define
their get_vtable function instead of directly declaring in the C
file where it is called.
• All places that were calling COGL_OBJECT_DEFINE need to have the
cogl_is_whatever function declared so these have been added either
as a public function or in a private header.
• Some files that were not including the header containing their
function declarations have been fixed to do so.
• Any unused error quark functions have been removed. If we later want
them we should add them back one by one and add a declaration for
them in a header.
• _cogl_is_framebuffer has been renamed to cogl_is_framebuffer and
made a public function with a declaration in cogl-framebuffer.h
• Similarly for CoglOnscreen.
• cogl_vdraw_indexed_attributes is called
cogl_framebuffer_vdraw_indexed_attributes in the header. The
definition has been changed to match the header.
• cogl_index_buffer_allocate has been removed. This had no declaration
and I'm not sure what it's supposed to do.
• CoglJournal has been changed to use the internal CoglObject macro so
that it won't define an exported cogl_is_journal symbol.
• The _cogl_blah_pointer_from_handle functions have been removed.
CoglHandle isn't used much anymore anyway and in the few places
where it is used I think it's safe to just use the implicit cast
from void* to the right type.
• The test-utils.h header for the conformance tests explicitly
disables the -Wmissing-declaration option using a pragma because all
of the tests declare their main function without a header. Any
mistakes relating to missing declarations aren't really important
for the tests.
• cogl_quaternion_init_from_quaternion and init_from_matrix have been
given declarations in cogl-quaternion.h
Reviewed-by: Robert Bragg <robert@linux.intel.com>
This adds a public function to read pixels from a framebuffer into a
CoglBitmap. This replaces the internal function
_cogl_read_pixels_with_rowstride because a CoglBitmap contains a
rowstride so it can be used for the same purpose. A CoglBitmap already
has public API to make one that points to a CoglPixelBuffer so this
function can be used to read pixels into a PBO. It also avoids the
need to push the framebuffer on to the context's stack so it provides
a function which can be used in the 2.0 API after the stack is
removed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
If the GL_OES_packed_depth_stencil extension is available then we can
try creating a combined depth-stencil buffer with the
GL_DEPTH24_STENCIL8 format. This adds a private flag for the feature.
https://bugzilla.gnome.org/show_bug.cgi?id=666184
Reviewed-by: Robert Bragg <robert@linux.intel.com>
The GL_DEPTH_STENCIL format for renderbuffers is defined in a separate
extension from GL_EXT_framebuffer_object so we probably shouldn't
being trying to use it unless that extension is advertised. This just
replaces the check for whether the driver is GL for a check for a
private feature flag before trying GL_DEPTH_STENCIL. The private
feature flag is set if the extension is available on GL.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously for the wireframe debug mode we identified the users
"cogl_position_in" attribute, mapped that, created a replacement
attribute with a LINE_LIST topology and then drew the attribute with a
simple pipeline with a green colour. This meant we completely discarded
the users original pipeline which may have involved vertex processing
that would be useful to visualize in the wireframe.
The new approach instead keeps the users attributes and instead
generates CoglIndices that can be used to refererence the original
attributes in LINE_LIST topology and instead of scrapping the user's
pipeline we now create a weak copy of the original pipeline and just
replace the fragment processing with a snippet to force the output color
to be green.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The cogl.h header is meant to be the public header for including the 1.x
api used by Clutter so we should stop using that as a convenient way to
include all likely prototypes and typedefs. Actually we already do a
good job of listing the specific headers we depend on in each of the .c
files we have so mostly this patch just strip out the redundant
includes for cogl.h with a few fixups where that broke the build.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
So we can get to the point where cogl.h is merely an aggregation of
header includes for the 1.x api this moves all the function prototypes
and type definitions into a cogl-context.h and a new cogl1-context.h.
Ideally no code internally should ever need to include cogl.h as it just
represents the public facing header for accessing the 1.x api which
should only be used by Clutter.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
All CoglBuffer constructors now take an explicit CoglContext
constructor. This is part of the on going effort to adapt to Cogl API so
it no longer depends on a global, default context.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
When using COGL_DEBUG=wireframe we were overlaying a wireframe of the
users geometry over the top of what was drawn for each primitive. It
seems to be more useful though that if the wireframe debug option has
been enabled then we should draw only the wireframes instead of
overlaying them.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds cogl_framebuffer_ apis for drawing attributes and primitives
that replace corresponding apis that depend on the default CoglContext.
This is part of the on going effort to adapt the Cogl api so it no
longer depends on a global context variable.
All the new drawing functions also take an explicit pipeline argument
since we are also aiming to avoid being a stateful api like Cairo and
OpenGL. Being stateless makes it easier for orthogonal components to
share access to the GPU. Being stateless should also minimize any
impedance miss-match for those wanting to build higher level stateless
apis on top of Cogl.
Note: none of the legacy, global state options such as
cogl_set_depth_test_enabled(), cogl_set_backface_culling_enabled() or
cogl_program_use() are supported by these new drawing apis and if set
will simply be silently ignored.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Instead of flushing the journal whenever the current framebuffer on a
context is changed it is now flushed whenever the framebuffer is about
to be destroyed instead. To do this it implements a custom unref
function which detects when there is going to be exactly one reference
on the framebuffer and then flushes its journal. The journal now
always has a reference on the framebuffer whenever it is non-empty.
That means the unref will only cause a flush if the only thing keeping
the framebuffer alive is the entries in the journal.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Unlike in GObject the type number for a CoglObject is entirely an
internal implementation detail so there is no need to make a GQuark to
make it safe to export out of the library. Instead we can just
directly use a fixed pointer address as the identifier for the type.
This patch makes it use the address of the class struct of the
identifier. This should make it faster to do type checks because it
does not need to call a function every time it wants to get the type
number.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
Previously flushing the matrices was performed as part of the
framebuffer state. When on GLES2 this matrix flushing is actually
diverted so that it only keeps a reference to the intended matrix
stack. This is necessary because on GLES2 there are no builtin
uniforms so it can't actually flush the matrices until the program for
the pipeline is generated. When the matrices are flushed it would
store the age of modifications on the matrix stack so that it could
detect when the matrix hasn't changed and avoid flushing it.
This patch changes it so that the pipeline is responsible for flushing
the matrices even when we are using the GL builtins. The same
mechanism for detecting unmodified matrix stacks is used in all
cases. There is a new CoglMatrixStackCache type which is used to store
a reference to the intended matrix stack along with its last flushed
age. There are now two of these attached to the CoglContext to track
the flushed state for the global matrix builtins and also two for each
glsl progend program state to track the flushed state for a
program. The framebuffer matrix flush now just updates the intended
matrix stacks without actually trying to flush.
When a vertex snippet is attached to the pipeline, the GLSL vertend
will now avoid using the projection matrix to flip the rendering. This
is necessary because any vertex snippet may cause the projection
matrix not to be used. Instead the flip is done as a forced final step
by multiplying cogl_position_out by a vec4 uniform. This uniform is
updated as part of the progend pre_paint depending on whether the
framebuffer is offscreen or not.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
_cogl_framebuffer_flush_state needs to handle the case where
ctx->current_draw_buffer is NULL because this will be set in the
destructor for CoglFramebuffer if the framebuffer being destroyed is
the current framebuffer. This patch just makes it assume all state has
changed in that case.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
We should not be deciding whether we need to really update the GL face
winding state at the point where a new framebuffer has been pushed, we
should be waiting until we have really been asked to flush some
framebuffer state otherwise we may do redundant work if multiple
framebuffers are pushed/popped before something is really drawn.
This integrates the face winding state tracking with the design we have
for handling most of the other framebuffer state so we benefit from the
optimizations for minimizing the cost of _cogl_framebuffer_flush_state()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
We should not be deciding whether we need to really update the GL color
mask state at the point where a new framebuffer has been pushed, we
should be waiting until we have really been asked to flush some
framebuffer state otherwise we may do redundant work if multiple
framebuffers are pushed/popped before something is really drawn.
This integrates the color mask state tracking with the design we have
for handling most of the other framebuffer state so we benefit from the
optimizations for minimizing the cost of _cogl_framebuffer_flush_state()
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Previously the cost of _cogl_framebuffer_state_flush() would always
scale by the total amount of state tracked by CoglFramebuffer even in
cases where we knew up-front that we only wanted to flush a subset of
the state or in cases where we requested to flush the same framebuffer
multiple times with no changes being made to the framebuffer.
We now track a set of state changed flags with each framebuffer and
track the current read/draw buffers as part of the CoglContext so that
we can quickly bail out when asked to flush the same framebuffer
multiple times with no changes.
_cogl_framebuffer_flush_state() now takes a mask of the state that we
want to flush and the implementation has been redesigned so that the
cost of checking what needs to be flushed and flushing those changes
now scales by how much state we actually plan to update.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
There was only one place where we called _cogl_clip_state_flush() in
_cogl_framebuffer_flush_state() and we can just as well use
_cogl_clip_state_get_stack() and _cogl_clip_stack_flush() directly
instead.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The only place we were calling _cogl_clip_stack_dirty() was when
changing the current draw_buffer which also implies a change in
the current clip stack. _cogl_clip_stack_flush() would already
be able to quickly determine that the clip stack has changed by
checking ctx->current_clip_stack so there isn't really any need
to explicitly mark the clip_stack state as dirty.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The aim is to make cogl-framebuffer.c responsible for avoiding redundant
flushing of its matrix stacks so this removes the checks done directly
within cogl-matrix-stack.c.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds CoglFramebuffer methods for accessing the clip stack. We plan
on making some optimizations to how framebuffer state is flushed which
will require us to track when a framebuffer's clip state has changed.
This api also ties in to the longer term goal of removing the need for a
default global CoglContext since these methods are all implicitly
related to a specific context via their framebuffer argument.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This ensures we don't touch a framebuffer's matrix stack directly if we
are also relying on _cogl_framebuffer_flush_state(). We want to get to
the point where we can set dirty flags against framebuffer state at the
point it changes but that means we can't allow direct access to the
matrix stack. _cogl_texture_draw_and_read() has now been changed so it
uses cogl_framebuffer_ methods to update the matrix stacks including
adding new internal _cogl_framebuffer_push/pop_projection() functions
that allow us to set transient projections.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
