The compositor will automatically unredirect the top most window which
is fully visible on screen. When unredirecting windows, it also shapes
the compositor overlay window (COW) so that other redirected windows
still shows correctly.
The function `get_top_visible_window_actor()` however will simply walks
down the window list, so if a window is placed on a layer above and
unredirected, then iconified by the client, it will still be picked up
by `get_top_visible_window_actor()` and he compositor will reckon it's
still unredirected while not in a visible state anymore, thus leaving a
black area on screen.
Make sure we skip the windows not known to the compositor while picking
the top visible window actor to avoid this issue.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/306
(cherry picked from commit 2fb3db7659)
Otherwise we'll be stuck with the same paint volume on the last
frame of the given effect, which could be wrong.
(cherry picked from commit a8a3c1017f)
If an effect is active and it overrides the paint volume, we should
always recompute the paint volume when requested and not use the
cache, since the paint volume override can change from call to
call depending on what phase of painting we are in. For instance,
if we are part way through painting effects and request the
paint volume, the paint volume should only go up to the current
effect, but in a later call to compute repaint regions, the
paint volume needs to expand to accomadate the effect.
This still involves a lot of recomputation in the case of effects -
in a later clutter version it would be worth adding an API to
allow effects to explicitly recompute and return a new the paint
volume up to the current effect as opposed to recomputing
the cached one.
(cherry picked from commit 5d19aee23a)
Previously we were checking l->data != NULL || (l->data != NULL &&
l->data != priv->current_effect). This would continue the loop even
if l->data == priv->current_effect, since l->data != NULL, which was
not the intention of that loop.
We also don't need to check that l->data != NULL before checking if
it does not match the current_effect, since we already checked
that current_effect was non-NULL before entering the loop.
(cherry picked from commit 4270eef16e)
On Wayland, xdg-foreign would leave a modal dialog managed even after
the imported surface is destroyed.
This is sub-optimal and this breaks the atomic relationship one would
expect between the parent and its modal dialog.
Make sure we unmanage the dialog if transient_for is unset even for
Wayland native windows.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/174
Related: https://gitlab.gnome.org/GNOME/mutter/issues/221
(cherry picked from commit b443bd42ac)
This avoids overwhelming the GPU with trying to update mipmaps at a high
rate. Because doing so could easily cause a reduction in the compositor
frame rate and thus actually reduce visual quality.
In the case of a window that is constantly animating in the overview,
this reduces mutter's render time by around 20%-30%.
(cherry picked from commit c9c3283540)
Children added to a parent after that parent (or its ancestors)
have already been cloned now inherit the clone branch depth of
the parent. Otherwise `clutter_actor_is_in_clone_paint` on the child
could return FALSE when it should have been returning TRUE.
(cherry picked from commit b393f3d540)
This optimization was presumably added before Clutter was able to
invalidate selected regions of an actor. Paint volumes are supposed
to be invariable as long as the actor conditions don't change.
Stacking of other actors shouldn't affect the paint volume, so it's
actually wrong to optimize those areas away here.
(cherry picked from commit ec8138773a)
The MetaCloseDialog implementation object may stay artifically alive
for a longer period. This was usually fine till gnome-shell commit
b03bcc85aad, as the check_alive() timeout will keep running even
though the window went unmanaged/destroyed, leading to crashes.
In order to fix this, forcibly hide the dialog if it is visible and
the window is being unmanaged, so the timeout is stopped in time.
(cherry picked from commit 6abe4703c7)
`modelview` is uninitialized and the `apply` function just multiplies it.
What we really want is to initialize `modelview` so replace `apply` with
`get`.
Who knows what bugs this may have caused...
(cherry picked from commit 62c67be4c8)
Clients using EGLStream-backed buffers will expect the stream to be
functional after wl_surface::attach(). That means the compositor-side
stream must be created and a consumer attached to it.
To resolve the above, this change realizes buffers even when the attach
operation is deferred (e.g. synchronized subsurfaces).
https://bugzilla.gnome.org/show_bug.cgi?id=782575
(cherry picked from commit 22723ca371)
When dealing with synchronized subsurfaces, we defer buffer attachments
until the parent surface state is applied.
That causes interaction issues with EGLStream backed buffers, as the
client expects the compositor-side stream to be functional after it
requests a wl_surface::attach.
By allowing the compositor to realize buffers without attaching them, we
could resolve the issue above if we define a realized EGLStream buffer
as a functional EGLStream (EGLStream + attached consumer).
This change moves the texture consumer creation part from the attach
function to the realize one.
https://bugzilla.gnome.org/show_bug.cgi?id=782575
(cherry picked from commit edd3634bb5)
Commit 712ec30cd9 added the logic to only
choose EGL configs that match the GBM_FORMAT_XRGB8888 pixel format.
However, there won't be any EGL config satisfying such criteria for
non-GBM backends, such as EGLDevice.
This change will let us choose the first EGL config for the EGLDevice
backend, while still forcing GBM_FORMAT_XRGB8888 configs for the GBM
one.
Related to: https://gitlab.gnome.org/GNOME/mutter/issues/2
(cherry picked from commit 1bf2eb95b5)
Commit 22723ca37 moved buffer realization to
meta_wayland_surface_commit() so that it wouldn't be part of
meta_wayland_buffer_attach().
However, creation of dmabuf buffers would call into
meta_wayland_buffer_attach() directly without realizing the buffer
first. attach() would then fail and mutter would effectively shut down
any clients using the zwp_linux_dmabuf protocol (note that if such
client was Xwayland, mutter itself would shut down as well).
Add the missing bit in order to make zwp_linux_dmabuf protocol work
again.
(cherry picked from commit 54709c16b5)
The special ::pick implementation there makes clutter fall into paths
that do require a get_paint_volume() implementation, or an infinite
area will be used.
Providing a paint volume here is easier on the invalidation mechanism.
(cherry picked from commit 94f4009882)
Restarting UPower will make every property of UpClient emit a "notify"
signal (as a GDBusProxy would). Avoid mutter reconfiguring the displays
when upower restarts by caching the last known value of "lid-is-closed"
and only reconfiguring the displays if it actually changed.
This fixes a black out of the screen when UPower restarts.
(cherry picked from commit 49b23c7490)
Don't try to connect to a UpClient signal if creating the client failed,
because UPower isn't running for example.
(cherry picked from commit 644a618fb1)
If a client asks for xdg-output before we have set the output's logical
monitor, we would end up crashing with a NULL pointer dereference.
Make sure we clear the resource's user data when marking an output as
inert on monitor change so that we don't end up with a Wayland output
without a logical monitor.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/194
(cherry picked from commit 48eaa36d41)
XcursorLibraryLoadCursor can return 'None' if the current cursor theme
is missing the requested icon. If XFreeCursor is then called on this
cursor, it generates a BadCursor error causing gnome-shell to crash.
Fixes https://gitlab.gnome.org/GNOME/mutter/issues/254
(cherry picked from commit 1bfa20929b)
Sending button events to a ClutterVirtualInputDevice, the API expects
button codes to be of the internal clutter type. The evdev
implementation incorrectly assumed it was already prepared evdev event
codes, which was not the case. Fix the evdev implementation to translate
from the internal representation to evdev before passing it along to
ClutterSeatEvdev.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/190
(cherry picked from commit 24aef44baf)
Commit a3da4b8d5b changed updating of
window monitors to always use take affect when it was done from a
non-user operation. This could cause feed back loops when a non-user
driven operation would trigger the changing of a monitor, which itself
would trigger changing of the monitor again due to a window scale
change.
The reason for the change, was that when the window monitor changed due
to a hot plug, if it didn't actually change, eventually the window
monitor pointer would be pointing to freed memory.
Instead of force updating the monitor on all non-user operations, just
do it on hot plugs. This allows for the feedback loop preventing logic
to still do what its supposed to do, without risking dangling pointers
on hot plugs.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/189
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/192
(cherry picked from commit 8d3e053059)
The bool determines whether the call was directly from a user operation
or not. To add more state into the call without having to add more
boolenas, change the boolean to a flag (so far with 'none' and 'user-op'
as possible values). No functional changes were made.
https://gitlab.gnome.org/GNOME/mutter/issues/192
(cherry picked from commit f4d07caa38)
Unfortunately XKeysymToKeycode() falls short in that it coalesces keysyms
into keycodes pertaining to the first level (i.e. lowercase). Add a
ClutterKeymapX11 method (much alike its GdkKeymap counterpart) to look up
all matches for the given keysym.
Two other helper methods have been added so the virtual device can fetch
the current keyboard group, and latch modifiers for key emission. Combining
all this, the virtual device is now able to handle keycodes in further
levels.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/135
(cherry picked from commit 85284acb00)
We need a way for mutter to exit if no available GPUs are going to work.
For example if gdm starts gnome-shell and we're using a DRM driver that
doesn't work with KMS then we should exit so that GDM can try with Xorg,
rather than operating in headless mode.
Related: https://gitlab.gnome.org/GNOME/mutter/issues/223
(cherry picked from commit deb541ef5a)
`ClutterText` painting for editable single_line_mode actors like `StEntry`
is always clipped by:
`cogl_framebuffer_push_rectangle_clip (fb, 0, 0, alloc_width, alloc_height)`
So it's difficult to get the rectangle wrong. However in cases where the
target framebuffer has changed (`cogl_push_framebuffer`) such as when
updating `ClutterOffscreenEffect` we had the wrong old value of `fb`. And
so would be clipping the wrong framebuffer, effectively not clipping at all.
(cherry picked from commit b8340f1355)
The "backends: Move MetaOutput::crtc field into private struct"
accidentally changed the view transform calculation code to assume that
"MetaCrtc::transform" corresponds to the transform of the CRTC; so is
not the case yet; one must calculate the transform from the logical
monitor, and check whether it is supported by the CRTC using
meta_monitor_manager_is_transform_handled(). This commit restores the
old behaviour that doesn't use MetaCrtc::transform when calculating the
view transform.
Fixes: https://gitlab.gnome.org/GNOME/mutter/issues/216
By using the shm file when sending the keymap to all clients, we
effectively allows any client to change the keymap, as any client has
the ability to change the content of the file. Sending a read-only file
descriptor, or making the file itself read-only before unlinking, can
be worked around by the client by using chmod(2) and open(2) on
/proc/<pid>/<fd>.
Using memfd could potentially solve this issue, but as the usage of
mmap with MAP_SHARED is wide spread among clients, such a change can
not be introduced without causing wide spread compatibility issues.
So, to avoid allowing clients to interfere with each other, create a
separate shm file for each wl_keyboard resource when sending the
keymap. We could eventually do this per client, but in most cases,
there will only be one wl_keyboard resource per client anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=784206
meta_backend_x11_grab_device is performing X server clock comparison
using the MAX macro, which comes down to a simple greater-than.
Use XSERVER_TIME_IS_BEFORE, which is a better macro for X server
clock comparisons, as it accounts for 32-bit wrap-around.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/174
(cherry picked from commit 1bfa20929b)
Commit c0d9b08ef9 replaced the old GBM API calls
with the multi-plane GBM API. However, the call to gbm_bo_get_handle_for_plane
fails for some DRI drivers (in particular i915). Due to missing error checks,
the subsequent call to drmModeAddFB[2] fails and the screen output locks up.
This commit adds the missing error checks and falls back to the old GBM API
(non-planar) if necessary.
v5: test success of gbm_bo_get_handle_for_plane instead of errno
This commit adopts solution proposed by Daniel van Vugt to check the return
value of gbm_bo_get_handle_for_plane on plane 0 and fall back to old
non-planar method if the call fails. This removes the errno check (for
ENOSYS) that could abort if mesa ever sets a different value.
Related to: https://gitlab.gnome.org/GNOME/mutter/issues/127
(cherry picked from commit f7af32a3ea)
If the surface is gone before `meta_xwayland_keyboard_grab_end()` is
called, we would bail out early leaving an empty grab, which will cause
a segfault as soon as a key is pressed later on.
Make sure we clean up the keyboard grab even if the surface is gone.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/255
(cherry picked from commit 252dd52439)
For historical reasons meta_monitor_is_active() checked whether it is
active by checking whether the main output have a CRTC assigned and
whether that CRTC has a current mode. At a later point, the MetaMonitor
got its own mode abstraction (MetaMonitorMode), but
meta_monitor_is_active() was never updated to use this.
An issue with checking the main output's CRTC state is that, if there is
some CRTC mode combination that for some reason isn't properly detected
by the MetaMonitorMode abstraction (e.g. some tiling configuration not
yet handled), meta_monitor_is_active() would return TRUE, even though no
(abstracted) mode was set. This would cause confusion here and there,
leading to NULL pointer dereferences due to the assumption that if a
monitor is active, it has an active mode.
Instead, change meta_monitor_is_active() to directly check the current
monitor mode, and log a warning if the main output still happen to have
a CRTC with a mode assigned to it. This way, when an not undrestood CRTC
mode combination is encountered, instead of dereferencing NULL pointers,
simply assume the monitor is not active, which means that it will not be
managed or rendered by mutter at all.
https://gitlab.gnome.org/GNOME/mutter/issues/130
(cherry picked from commit 4d465eac08)
When a transient window is destroyed, the expected behavior is that
focus is passed to the ancestor if possible. This was broken for
quite a while until the previous commit, so add a test case to make
sure it doesn't happen again.
https://gitlab.gnome.org/GNOME/mutter/issues/15
(cherry-picked from commit 137f22236c)
Since commit b3b9d9e16 we no longer have to pass the unmanaging window
to make sure we don't try to focus it again, however the parameter also
influences the focus policy by giving ancestors preference over the normal
stack order.
https://gitlab.gnome.org/GNOME/mutter/issues/15
(cherry picked from commit d99442d6e6)
We refuse to move focus while a grab operation is in place. While this
generally makes sense, there's no reason why the window that owns the
grab shouldn't be given the regular input focus as well - we pretty
much assume that the grab window is also the focus window anyway.
In fact there's a strong reason for allowing the focus change here:
If the grab window isn't the focus window, it probably has a modal
transient that is focused instead, and a likely reason for the focus
request is that the transient is being unmanaged and we must move
the focus elsewhere.
https://gitlab.gnome.org/GNOME/mutter/issues/15
(cherry picked from commit 148da24f95)
meta_window_wayland_update_main_monitor() would skip the monitor update
if the difference in scale between the old and the new monitor would
cause another monitor change.
While this is suitable when the monitor change results from a user
interactively moving the surface between monitors of different scales,
this can leave dangling pointers to freed monitors when this is
triggered by a change of monitor configuration.
Make sure we update the monitor unconditionally if not from a user
operation.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/189
(cherry picked from commit a3da4b8d5b)
Avoid exporting through org.gnome.Mutter.DisplayConfig.GetCurrentState
excessively-low screen resolutions setting both a minimum width and a minimum
height. GetCurrentState is e.g. used by Gnome Control Center to build a list of
selectable resolutions.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=793223
(cherry picked from commit 649c26e05a)
If drmModeSetCrtc() is called with no fb, mode or connectors for some
CRTC it may still fail, and we should handle that gracefully instead of
assuming it failed to set a non-disabled state.
Closes https://gitlab.gnome.org/GNOME/mutter/issues/70
(cherry picked from commit 6e953e2725)
DRM drivers can be opened by meta_launcher_open_restricted() even if they don't
implement modesetting. However, drmModeGetResources() will return NULL.
Check whether that happened in meta_gpu_kms_new() and return with an error
instead of crashing.
Fixes#223.
For some reason "backends: Remove X11 idle-monitor backend" removed
unrelated warning messages for when generated monitor configurations
that should work didn't, which also made the unit tests fail.
This commit adds them back, which also makes the tests pass again.
(cherry picked from commit d9c18fd5bb)
The framerate for screen cast sources was set to variable within 1 FPS
and the framerate of the monitor being screen casted. This meant that if
the sink didn't match the framerate (e.g. had a lower max framerate),
the formats would not match and a stream would not be established.
Allow letting the sink clamp the framerate range by setting it as
'unset', allowing it to be negotiated.
xdg-foreign clears the `transient_for` of a modal dialog when its
imported parent is destroyed, which would later cause a crash in
`constrain_modal_dialog()` because the transient `NULL`.
So in case a modal dialog has no parent, do not try to constrain it
against its parent.
Closes: https://gitlab.gnome.org/GNOME/mutter/issues/174
(cherry picked from commit 912a6f5e3f)
Make it so that each logical monitor has a reference to all the
monitors that are assigned to it.
All monitors has a reference to each output that belongs to it.
Each output has a reference to any CRTC it has been assigned.
https://bugzilla.gnome.org/show_bug.cgi?id=786929
(cherry picked from commit 768ec15ea0)
