With the new flexible system in place, there's no point explicitly
hardcoding some built-in keybindings; just use the generic mechanism
for everything.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Currently we hardcode the set of keybindings that are available in the
overview; add a generic mechanism to specify in which KeybindingModes
a keybinding should be available.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
For now we just use it to assign an identifier to modal modes in
which we want to allow some keybindings, but we don't use it for
any actual filtering; we'll start doing this shortly.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
We are currently using a hack to allow a select set of keybindings
in the overview. Implement the new MetaPlugin keybinding_filter
hook, which provides a cleaner way to achieve the same.
https://bugzilla.gnome.org/show_bug.cgi?id=688202
Remove section titles for ethernet and mobile broadband, and replace
them with device status items that recognize if multiple devices are
installed in the same section, and if so automatically disambiguate.
https://bugzilla.gnome.org/show_bug.cgi?id=677142
Due to an oversight, the width of the password entry is currently
determined by the length of the message description. Fix the flags
so that the entry spans the entire width of the dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684810
When updating the dash, we already avoid all animations while the
overview is hidden. However, as we are using Main.queueDeferredWork(),
updates may be deferred up to ~20 seconds while the overview is hidden.
If the overview is entered before a queued update has taken place, it
will be run immediately on map - as the overview is visible by then,
this means animating any outstanding changes.
Work around this by skipping animations during overview transitions as
well.
https://bugzilla.gnome.org/show_bug.cgi?id=686530
If the session mode has no locking support, screenshield had code to
unlock automatically, but it did so by checking the return value of
the constructor, instead of checking if the constructor was actually
callable, so it would get a TypeError before reaching the check.
https://bugzilla.gnome.org/show_bug.cgi?id=687708
At the moment, only the mouse can be used to focus and answer a chat
notification.
This adds a new keybinding (defaults to <Super>+n) to focus and expand
the active notification.
https://bugzilla.gnome.org/show_bug.cgi?id=652082
When in the overview, if you move the mouse cursor over one of the
application launchers in the dash, all the unrelated windows are dimmed
both both in the window view and in the workspace view.
It helps to easily understand whether or not there are already opened
windows for this application, and where they are. It can also help in
differentiating the windows in the overview (sometimes the thumbnails
aren't precise enough to easily know which thumbnail belongs to which
application).
https://bugzilla.gnome.org/show_bug.cgi?id=657315
This has also the benefit of getting the application even if it can not
be retrieved through AppSystem, which can happen if the runtime WMClass
does not match the one of the desktop file.
This especially looked wrong with the following commits related to the
bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
We simply hide the label when the popup is opened instead of relying
on the popup state when the hover state change.
To do this we replace the flag isMenuUp by a 'menu-state-changed' signal
on the AppWellIcon. This simplifies the dash label visibility handling
code that need additional changes for the bug.
https://bugzilla.gnome.org/show_bug.cgi?id=657315
Initializing this synchronously means that we will possibly wait for the
process to be auto-activated and answering to our call.
If the process is already running it also might not answer immediately
our request, as it might be doing sync I/O.
The right thing to do is to initialize the proxy asynchronously; there
are try/catch blocks in place for when the object is not available, or
not properly initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
This is called in the main thread, which we should never block for
synchronous I/O.
Since the operation we're wrapping is async already, just use
g_file_query_info_async() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Remote search providers install an auxiliary keyfile to specify
static information, such as the object path/bus name needed to activate
the binary. Such keyfiles also specify the application the providers
pushes results for; currently, we support two formats for application
information
- two fields, "Title" and "Icon" that specify a (translatable) title and
an icon name for display
- one field "DesktopId" that specifies the desktop file name of the
application backing the provider, which obsoletes the previous
Title/Icon syntax
Since all providers in GNOME use DesktopId now, and we need to ensure a
remote search providers is always backed by an application for future
development, this commit drops the support for the older syntax.
https://bugzilla.gnome.org/show_bug.cgi?id=687491
Switch from a ClutterDragAction to a ClutterGestureAction, that gives
us the velocity of mouse motion at each step, and use it to compute the
animation time for completing the hide gesture.
https://bugzilla.gnome.org/show_bug.cgi?id=682537
The background is the same as the normal desktop, so we blur and
desaturate it to clearly show that it's not the normal system state.
To do so, we don't use standard ClutterEffects, to avoid the FBO
indirection. Instead, we take advantage of MetaBackgroundActor support
for GLSL code and paint the shaded background texture directly.
https://bugzilla.gnome.org/show_bug.cgi?id=682536
After some changes, the tooltip label at the dash is not available
until it is visually shown. As this is not anymore a reliable
source of accessible name, we just set the accessible name
with the string used on that label.
https://bugzilla.gnome.org/show_bug.cgi?id=686583
If we lock before the user becomes active again, gnome-session will never
change presence from IDLE, and thus we'll never hide the lightbox.
Instead, install our own idle monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=687020
Entering the overview with the overlay key is done on key release but
exiting the overview on key press, which is inconsistent.
This change makes the overview hidden also on key release.
https://bugzilla.gnome.org/show_bug.cgi?id=683024
Adding a radial gradent to the dimming effect gives more depth to
the background.
Shading is computed in a GLSL fragment shader, and uses distance to
center of the screen to interpolate the darkening value to use.
Based on a patch by Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=669798
The AnimatedIcon does not have an API for controlling the animation but
relies on the :visible property changes to start and stop a timeout used
to update the frame.
This has the inconvenient of having a side effect when visible is set to
true multiple times, and is not really the API expected from such
component.
Switch to a start/stop API instead. Also, update to the first frame at
startup while we are at it, since this is the expected behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=687583
You can't login until something has been entered in the password field.
We should therefore make the login button insensitive until you have
entered some text.
https://bugzilla.gnome.org/show_bug.cgi?id=687112
Notifications that are created in response to direct user actions like
"is ready" or "'foo' has been removed from favorites" should always be
displayed even though the user has marked him/herself busy.
https://bugzilla.gnome.org/show_bug.cgi?id=662900
The barrier was introduced to make the message tray hot corner
usable in multiple monitor setups. With the hot corner gone in
3.6, the pointer barrier doesn't make much sense anymore, so
remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=687457
Instead of keeping track of the old adjustment.upper keep track of the
old adjustment.value that corresponded to the bottom scroll position.
This fixes the integrated chatview not always scrolling to the bottom
by removing the assumption that page_size is constant between updates,
which is not the case as the view is presented in various different ways.
https://bugzilla.gnome.org/show_bug.cgi?id=686571
I've heard quite a bit of feedback from people who want to log out,
even if they are the sole user on their system. It doesn't seem worth
alienating them over this; so add a setting to make the 'Log out' item
always show up.
https://bugzilla.gnome.org/show_bug.cgi?id=686057
While we recreate icons on style changes elsewhere, the faded
icon in the application menu will stick around after icon theme
changes until another application is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=687224
Stop pretending that VPN is a NMDevice, and split the useful bits into
a NMConnectionBased interface.
Make each connection have its own switch menu item and handle its own
status, and remove the VPN section title, which is no longer needed.
https://bugzilla.gnome.org/show_bug.cgi?id=682929
Currently the entry takes the intial key focus, but is not actually
part of the focus chain. Fix that, even though keynav does not work
too well for the dialog anyway, due to the entry consuming tab for
command completion.
https://bugzilla.gnome.org/show_bug.cgi?id=687127
When the user has the entered the password for the second time
and clicked OK, clear messages from the previous attempt, so any
new failure is shown clearly.
https://bugzilla.gnome.org/show_bug.cgi?id=687132
Reposition the window overlay when the title changes, using the current
transformed size of the window clone.
Includes a test that changes title to a string of random length every 3 seconds.
Based on a patch by Alex Hultman <alexhultman@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=620874
While looking at how the plymouth implementation was built, I was so
short-sighted and focused on the string "_XROOTPMAP_ID" that I didn't
realize it was the name of the standard background on the root window.
Remove our own implementation, and switch to using a standard mutter
MetaBackgroundActor.
https://bugzilla.gnome.org/show_bug.cgi?id=682428
Rationale:
- Getting something out of the way should be quick;
- Very few things in the real world move linearly so, linear
animations, especially for something as big and visible as this,
felt too artificial;
- Moving the curtain out should start slower to make it feel like
having weight (it fills the whole screen after all) but quickly
accelerate towards the end to make it snappy too.
https://bugzilla.gnome.org/show_bug.cgi?id=686745
When the summary notification is open when the tray is closed, we end
up with two concurrent animations: the notification fading out, and the
tray moving away from underneath it. Sliding out the tray should be the
primary transition here, so hide the notification immediately to not
draw the user's attention away from it.
https://bugzilla.gnome.org/show_bug.cgi?id=686888
Having the close button move away from under the pointer after
clicking it is confusing and distracts from the main transition,
which is hiding the notification. Just hide it immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=682237
Rather than destroying the entire source, which is unintuitive, simply
close the notification. Removing the entire source is still possible
by right-clicking on the summary item and choosing "Remove".
https://bugzilla.gnome.org/show_bug.cgi?id=682237
GDM has a 'logo' key in its schema to allow distributors to add
some branding. It is currently placed above the user list, which
no longer works too well since the login screen lost its dialog
window. Display the logo in the top-left corner instead of the
Activities button instead.
https://bugzilla.gnome.org/show_bug.cgi?id=685852
Currently close() is a no-op when the menu has already been closed.
However, repeated calls could pass different animation parameters.
For instance in the user menu, we try to hide the menu immediately
before locking the screen, to avoid the popup jumping across the
screen while fading out - as we do this from the corresponding
item's activate handler, the closing is still animated if the menu's
own handler (which requests a full animation) is run first.
Fix this by changing close() to overwrite ongoing animations before
bailing out early.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
Change the layout strategy to be more like the mockups. With less than
two rows of windows, we try to fit every window in a non-aligned situation;
with more than three rows of windows, we try to fit every window in an
aligned situation.
Based heavily on a patch from Pierre-Eric Pelloux-Prayer <pelloux@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=582650
Ouch. This went unnoticed for a long time as by default (using
dynamic workspaces) only one workspace is added at a time, which
happens to work fine.
https://bugzilla.gnome.org/show_bug.cgi?id=686487
Hide workspace switcher if dynamic workspaces is disabled and number of
workspaces is set to one only, since the user is bound to only one workspace
and showing the switcher is redundant.
Signed-off-by: Seif Lotfy <seif@lotfy.com>
The same logic as for commit 1f30670c1d applies to the case
where we lock the screen before suspending - we don't want the
menu to jump to the opposite screen side to fade out, so remove
the animation altogether.
https://bugzilla.gnome.org/show_bug.cgi?id=686484
Due to a typo, it never worked correctly. After a fix-up to the appropriate
method, the behavior is suboptimal, as the buttons only fade in the first time
the modal dialog is constructed. Just remove the fade-in behavior, rather than
keeping this non-working code around.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
This is a workaround for power users for the "Show Apps" button
placement being too inconvenient to press at the bottom of the
dash favorites list.
Unity also uses Super+A to show the Apps lens.
https://bugzilla.gnome.org/show_bug.cgi?id=685738
Currently the label for the show-apps button is only updated during
drag operations, so after an item is successfully dropped on the
button, the label will still read "Remove from Favorites".
Fix this by resetting the label on drag-end.
https://bugzilla.gnome.org/show_bug.cgi?id=684627
If esc is pressed twice in succession in the unlock dialog, the curtain
is cancelled, but the dialog is cleared after the first esc cancels it,
and it's not destroyed and recreated.
https://bugzilla.gnome.org/show_bug.cgi?id=685441
The interface was declared to take an unsigned integer instead
of a boolean, as gnome-screensaver does. Due to this,
gnome-screensaver-command --activate or --deactivate does not
work when used with gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=686063
The configured calendar application might not actually be installed.
Instead of failing with an error message, hide the menu item altogether
in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=686050
Since panel corners are currently square, this doesn't really affect much,
but it's very clear what the code was supposed to be. At the same time,
also fix up a redeclaration with 'let', which technically isnt' kosher.
If there are either no resident or persistent notifications, we'll
add some spacing for those boxes that may contain nothing. Make them
invisible to remove the spacing for those elements. It's possible
that we may want to be smarter about this in StBoxLayout to remove
spacing for zero-sized actors, but today is not the day.
https://bugzilla.gnome.org/show_bug.cgi?id=685919
Currently when the summary boxpointer is ungrabbed automatically
because the keyboard focus was moved outside the message tray
(for instance by selecting the overview search entry or opening
the right-click menu of a dash item), after the popup is hidden
_updateState() will grab focus and show the popup again.
Work around this by unsetting the clicked summary item when losing
focus to an actor outside the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=685156
Commit 448517032e added the message tray unconditionally to
the Ctrl-Alt-Tab popup, but while this makes sense for a normal
session, we do not want it in the login screen.
Be a bit more careful where we make the tray available.
https://bugzilla.gnome.org/show_bug.cgi?id=685914
This ensures that the desktop window's smooth fadeout when going to
the overview is in the same spot as the desktop window, which may not
always be at 0, 0.
https://bugzilla.gnome.org/show_bug.cgi?id=681159
Having the tooltip change when it's visible looks strange and glitchy.
This also makes sure that "Remove from Favorites" doesn't change, even
when the user removes their mouse cursor from it.
https://bugzilla.gnome.org/show_bug.cgi?id=685313
The preference controls whether the screen should be locked when
the screensaver is activated, not whether the screen should be
locked at all. In particular after having switched to a different
user, log out should not automatically switch back to the unlocked
session, so always activate the lock when user switching.
https://bugzilla.gnome.org/show_bug.cgi?id=685536
Currently Return is used to activate the default button of a modal
dialog if no key is specified. It makes sense to allow alternatives
as the keypad's Enter key as well in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=685511
GDM does not allow concurrent logins of a single user, so making
'Switch Session' a user switch operation does not work - in order
to choose a different session, users have to log out.
Rather than making 'Switch Session' an alias of 'Log out' (which
is available anyway when multiple sessions are defined), remove
the item altogether - 'Switch Session' suggests an operation that
does not loose state, and we currently favor 'Switch Session' over
'Switch User', so on systems that have both multiple users and
multiple sessions, the latter would become unavailable.
https://bugzilla.gnome.org/show_bug.cgi?id=685062
Content-Type scanning can be super expensive. The autorun manager is meant
for local filesystems that are plugged into a USB port or similar, not
remote NFS or sshfs mounts.
https://bugzilla.gnome.org/show_bug.cgi?id=684093
When Florian landed the new dash container to show the all apps button
always, he got the math wrong -- he forgot to add padding around the
container, and used the height of the box to calculate a y2 position,
rather than the y2 position of the box.
https://bugzilla.gnome.org/show_bug.cgi?id=684619
Currently the visibility of input volume is only updated when a stream
is added/removed - apparently no one noticed until now, as in the normal
user session we get away with this as long as we have some startup sound,
but this is not the case in the lock screen, so we may end up showing
input volume incorrectly.
https://bugzilla.gnome.org/show_bug.cgi?id=684611
The keyboard is shown/hidden automatically when (un)focusing a
ClutterText actor. This behavior is unwanted when opening the
extended keys popup, so focus changes to the popup are ignored.
However, we also want to ignore focus changes from the popup
to avoid the keyboard hiding itself after pressing an extended
key.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
The keyboard is shown/hidden automatically when (un)focusing a
ClutterText actor. This behavior breaks with the message tray now
grabbing/releasing key focus when toggled. Fix this by ignoring
all focus changes to or from the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
Currently if a summary item signals that it has handled a click
itself, the tray hides itself. This behavior is wrong for the
On-Screen-Keyboard, which appears as a unit with the tray, so add
a property to opt-out of the default behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
GrabHelper automatically releases grabs when the user clicks outside
the grabbed actors. However at least for the message-tray (which is
the only user of grabHelper at the moment), we must ignore any events
from the On-Screen-Keyboard, to prevent the tray from hiding at every
key press.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
This fixes a case of _updateState() being called recursively,
resulting in stray grab()/ungrab() calls the leave the entire
desktop in a stuck focus state.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
The message tray is now modal and pushes the view up, but the keyboard
is shown below it. Solve this by applying a special styling to the
keyboard and message tray combination, and by not pushing the windows
up when the keyboard is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
When changing the user's avatar image, AccountsService will
overwrite the old image with the new one, so the location
returned by get_icon_file() is always the same.
In order to pick up the change, we need to make sure to clear the
previous image from both StTextureCache and StThemeNode's paint
cache.
https://bugzilla.gnome.org/show_bug.cgi?id=679268
With the recent session mode changes, the visibility of settings
items is now only set on sessionMode::updated - while the signal
is emitted when the session mode is initialized, settings items
that are added after that are visible regardless of the allowSettings
setting until the next sessionMode::updated signal is received.
Fix this by explicitly setting the initial visibility of settings
items.
https://bugzilla.gnome.org/show_bug.cgi?id=684473
While the unlock dialog is created early so that it appears below
the shield while the curtain slides up, it is destroyed immediately
when the shield slides back in.
Keep it around until the shield is down instead.
https://bugzilla.gnome.org/show_bug.cgi?id=684342
When locking the screen, the user menu is moved to the opposite
side. Unless we close the menu immediately without animation, the
menu will jump to the other side and fade out while the screen
shield slides down.
https://bugzilla.gnome.org/show_bug.cgi?id=684343
Instead of leaving the login or unlock dialogs in an inconsistent state,
catch DBus errors and show an Authentication Error message. The error
details are logged in the session logs.
https://bugzilla.gnome.org/show_bug.cgi?id=683060
Due to the way the IBus API works we might get property changes while
the menu is already open. In that case the separator visibility logic
doesn't work since it only applies on menu open/close. This works
around that issue.
https://bugzilla.gnome.org/show_bug.cgi?id=682314
IBus has a properties API which are basically generic knobs into the
engine which are serialized and presented in a way that allows us to
easily build actionable UI elements with them.
Instead of implementing the whole generic system and accepting
everything coming out of the engines, for now, this patch just adds
support for a couple of important IBus Anthy properties.
https://bugzilla.gnome.org/show_bug.cgi?id=682314
The screenshield requires gdm 3.5, which can be problematic in
jhbuild configurations, or distributions that don't use GDM as the display
manager. Allow transparent fallback to gnome-screensaver in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=683060
When the tray is triggered by keybinding rather than dwelling, the
first summary item should be given key focus. Currently this is
achieved by grabbing the focus before toggling the tray, so that
the grabHelper will move the focus for us. However this interferes
with the grabHelper's focus save/restore mechanism - for instance,
after using the keybinding once, the tray will always come up with
the first item focused.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
Currently it is only possible to use keynav inside the tray if it
has been triggered with the keyboard shortcut. Make it possible to
initiate keynav by hitting Tab in other cases as well.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
Currently opening the summary boxpointer acts as a stop gap for
keynav - the only shortcut still working is "Escape" to hide the
tray altogether.
Change the handling of Escape to only close the summary boxpointer
and allow to use the down arrow as alternative (unless the boxpointer
already processes the key press itself of course, like the chat
entry does). Also add a Delete shortcut to dismiss the open summary
item.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
Currently clicks outside the grabbed actors are handled the same as
the user pressing Escape - a single actor is popped from the grab stack.
However according to the design, outside clicks should release all grabs.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
When using keynav in the top bar, menus may be opened using the
down arrow; in a similar fashion, allow to open the summary
boxpointer with the up arrow.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
'destroy' is emitted before the actor is unmapped during destruction, so
notify::mapped would emit an exception. Since unmapping is guaranteed,
the 'destroy' signal is unnecessary.
https://bugzilla.gnome.org/show_bug.cgi?id=684154
Remove the PlacesManager, its search provider and all associated code.
Places search is now provided by nautilus using the external search
provider API.
https://bugzilla.gnome.org/show_bug.cgi?id=683506
When Dan Winship wrote the GrabHelper code originally, it didn't
handle a grab stack. I wrote the grab stack code hastily when landed
the message tray, not understanding all of the code that was involved
here.
Fix it so that we properly do the operations for each type of grab
when we first need to, and not sometimes when the first grab is taken.
https://bugzilla.gnome.org/show_bug.cgi?id=683546
_hideTray() is called by _updateState() when the tray is visible
but should be hidden; however, _updateState() may be called again
from within _hideTray() when releasing the GrabHelper grab, so
unless we update the _trayState variable before that, _hideTray()
will be called a second time.
https://bugzilla.gnome.org/show_bug.cgi?id=682243
A couple of people have walked up to me and asked how to get to the
unlock screen from the screen shield. This was partly addressed by
bug 682285, but all three people who asked me about this said they
tried the return key and were surprised when it didn't work.
It sort of makes sense, since the user is "enter"ing the computer or
"return"ing to it.
This commit makes enter work in addition to the existing escape key.
https://bugzilla.gnome.org/show_bug.cgi?id=683889
Since we now use the capture phase to feed events into the input
method, we must set the capture flag for the event that starts
searches so that IMs can get at it.
https://bugzilla.gnome.org/show_bug.cgi?id=684040
If the user starts typing right away, assume that the entry is
for a password and don't clear it when the secret request actually
comes. Then, if the user completes typing, we also stash the answer
and send it to GDM right away on the first PAM prompt.
https://bugzilla.gnome.org/show_bug.cgi?id=681576
The onUngrab callback already checks if all notifications are destroyed and
hides immediately if so. Previous code instead would leave state handling
in an inconsistent state, by not removing the grab, not setting
summaryBoxPointerState to HIDDEN and not disconnecting various signals.
https://bugzilla.gnome.org/show_bug.cgi?id=684036
Look at the focus window's interaction timestamp to catch the case
where the user is typing and knocks the pointer into the tray or
mouses down to the bottom of the screen and clicks on something.
If the focus window's interaction time differs at the start and
end of the tray dwell then we don't activate the tray.
https://bugzilla.gnome.org/show_bug.cgi?id=683811
In gdm, we would attempt to become modal during the synchronous initialization,
and this would fail, as X prevents grabs on unmapped windows. Instead,
wait for the stage to be visible before becoming modal.
https://bugzilla.gnome.org/show_bug.cgi?id=683357
As PAM messages are now shown below the password entry, there is no
need for this complexity, and we can just hide all notifications.
Also, this avoids the ambiguity between notification.showWhenLocked and
source.showInLockScreen, which have very different effects.
https://bugzilla.gnome.org/show_bug.cgi?id=683369
The selector for insensitive popup menu items was wrong (a PopupMenuItem is
a ShellGenericContainer, not a StButton). Fixing it showed that previous
:insensitive tracking was manual for a reason: we have many items that are
not reactive, but don't want the insensitive styling (for example those in
the battery menu).
Fix it by adding a new style-class, popup-inactive-menu-item, that is added
to all new PopupMenuItems that are not activatable.
https://bugzilla.gnome.org/show_bug.cgi?id=683988
CLUTTER_CURRENT_TIME (like GDK_CURRENT_TIME and libX11 CurrentTime) is 0,
and thus compares lower than all valid timestamps, meaning that
focus changes without an X11 event in the stack are ignored by
the on screen keyboard.
https://bugzilla.gnome.org/show_bug.cgi?id=664309
pending-messages-removed is emitted for sent messages too, but we don't
include those in the _pendingMessages list. Avoid useless spew in the session
logs in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=683449
St.Theme.load_stylesheet() does not queue a theme context change, so
any styling of widgets created before will not be updated. To fix this,
load the stylesheet before the extension builds its own UI in enable()
https://bugzilla.gnome.org/show_bug.cgi?id=682128
This means that right-clicking on an entry shouldn't visibly change the theme,
which is unexpected. Make sure that closing the menu refocused the entry, too.
https://bugzilla.gnome.org/show_bug.cgi?id=683509
When the dash contains more icons than fit at the minimum icon size,
icons are cut off at the end. This means that the show-apps button
will be the first to disappear, which is problematic given it's the
sole access point for other applications (for those that refuse to
use search at least).
Fix by using a dedicated widget for the dash actor, so that in case
of underallocation only icons above the show-apps button end up being
cut off.
https://bugzilla.gnome.org/show_bug.cgi?id=683340
Have distinct session modes for the lock screen and the unlock dialog,
and rework the logic in ScreenShield to have the lock-screen mode stack
onto the unlock-dialog mode (where applicable)
https://bugzilla.gnome.org/show_bug.cgi?id=682542
They are bigger and show an ellipsis if the count goes over 99. They
now have a blurred background and a drop shadow based on
data/theme/close-window.svg.
https://bugzilla.gnome.org/show_bug.cgi?id=682891
ClutterBinLayout is so amazingly broken: it uses the y_expand property to
find out if the children needs to honor alignment/fill, but that property is
"bubbled up" from the grand-children, so the notificationWidget would notice
the y_expand on the notificationBin (necessary to make the layout manager on
notificationWidget honor the alignment property for the bin), and would
receive the full height of the MessageTray actor from the parent's layout manager,
resulting in a notificationWidget shifting up, with the notification detached
from the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=683628
The stage's background color can visible on screencasts when multiple monitors
with different resolutions are in use.
Change it to from blue to grey to look better as requested by the designers.
https://bugzilla.gnome.org/show_bug.cgi?id=683514
If the arrow's origin is so close to the edge that the arrow will not
be isosceles, we try to compensate as follows:
- We skip the rounded corner and settle for a right angled arrow as
as shown below.
|\_____
|
|
- If the arrow was going to be acute angled, we move the position of
the box to maintain the arrow's accuracy.
https://bugzilla.gnome.org/show_bug.cgi?id=680077
With the recent session mode changes, there is now a mix of modes
that are meant to apply to the entire session (specified as parameter
to the --mode command line switch) and temporary modes like the lock
screen; introduce a property to make the difference explicit, and only
allow "primary" modes to be specified on the command line.
https://bugzilla.gnome.org/show_bug.cgi?id=683488
Users of GrabHelper.grab() espect that the actor parameter (or one of its
children) will receive focus, irrespective of the previous focus location.
This fixes the key focus on the chat entry when expanding the notification.
https://bugzilla.gnome.org/show_bug.cgi?id=683449
Hidden children are currently ignored in width requests; in the
case of submenu items, this results in abrupt width changes of
open menus when the corresponding SubMenuMenuItem is toggled.
To fix, only ignore SubMenu children when the corresponding
SubMenuMenuItem is hidden as well.
https://bugzilla.gnome.org/show_bug.cgi?id=683485
The special padding rules for submenu items currently ensure that
content aligns properly when the scrollbar is shown. While they
work nicely for the network menu, it looks odd for non-scrolled
submenus, so make this case explicit by introducing a :scrolled
pseudo class and adjust the style rules to use it.
https://bugzilla.gnome.org/show_bug.cgi?id=683009
The code here was trying to center the label, but that didn't
happen because we allocated the entire space to the label, which
still plonks it at the top.
Message tray sources cannot be reused after destruction, so connect
to 'destroy' signal and clear out the previous one.
Also, fix some code paths that used the autorun manager incorrectly.
https://bugzilla.gnome.org/show_bug.cgi?id=683377
Previous code was activating the networkAgent and telepathyClient
in the lock-screen, irrespective of the previous mode.
Now it checks if the session mode is locked down, and if so it refuses
to start new components.
https://bugzilla.gnome.org/show_bug.cgi?id=683400
Previous code had a mixture of fixed positioning and ClutterBinLayout,
and this was broken badly for autorun notifications.
Rewrite to use ClutterBinLayout and Clutter properties exclusively.
https://bugzilla.gnome.org/show_bug.cgi?id=683378
Panel already forces each item to be a PanelMenu.Button, so it's better
to have the latter handle the bin container too, instead of attaching
a private property that might collide with internal usage by the indicator.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Previously we would only read the default sink and default source when
the connection to PulseAudio succeded. This worked because all VolumeMenu
users where initialized synchronously during shell load.
With the recent session mode changes though, the lock screen menu is
created on demand, and when it loads PA is already connected, so
it doesn't update the sliders.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Have main.js call .showDialog() when going back from the lock-screen, instead
of using the return value of createUnlockDialog to know if the dialog
was persistent.
_keepDialog is still used as LoginDialog cannot really be destroyed,
and cancelling it does not destroy it.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
The sudden transition from the lock screen to the user session
may be a bit sudden and overwhelming. Make ourselves more shell-like
by resizing out the screen shield according to mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=683170
It makes more sense to define session modes in terms of what you're
adding to the bare shell, not in terms of what you're taking away
from the user session.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
If we don't freeze the presence icon, we can end up in a place where
we'll be updating the icon before we fade out the panel indicators when
coming back from the lock screen.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Components are pieces of the shell code that can be added/removed
at runtime, like extension, but are tied more directly to a session
mode. The session polkit agent, the network agent, autorun/automount,
are all components, keyring, recorder and telepathy client are all
now copmonents.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Since we eventually want to add a system for changing the top panel
contents depending on the current state of the shell, let's use the
"session mode" feature for this, and add a mechanism for updating the
session mode at runtime. Add support for every key besides the two
functional keys, and make all the components update automatically when the
session mode is changed. Add a new lock-screen mode, and make the lock
screen change to this when locked.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Instead of showing a notification, add a small message immediately
below the entry, and give the user two more attempts to login,
before going back to the welcome or lock screen.
https://bugzilla.gnome.org/show_bug.cgi?id=682544
The supposed reason for launching the calendar server in a peculiar
way was so that the process would be killed when the Shell was killed,
but that didn't actually work. Launch the calendar server through auto-start,
and persist all throughout the session.
https://bugzilla.gnome.org/show_bug.cgi?id=683156
Commit 5c6b1fd0c modified the hierarchy of SummaryItem contents, by
introducing a notificationStackWidget in place of the StackView, but
forgot to update the bits in ScreenShield.NotificationsBox that accessed
and reparented that directly, causing a crash by invalid theme node access.
https://bugzilla.gnome.org/show_bug.cgi?id=682683
We already could build the right part of the panel declaratively according
to the session mode. Extend that to handle the left and center parts.
Also, move the mapping from the roles to the classes in panel.js, as it shared
by all modes.
https://bugzilla.gnome.org/show_bug.cgi?id=682546
Ensure that all async callbacks check and ignore G_IO_ERROR_CANCELLED.
Ensure that all runs of authentication have their own GCancellable, so
that .begin() can be called multiple times on the same user verifier.
Check for fingerprint reader when beginning authentication, and not
when reset by GDM.
https://bugzilla.gnome.org/show_bug.cgi?id=682544
Introduce a StShadowHelper to manage drop shadows from JS (which
cannot use Cogl directly), and use it in a new StWidget-derived
JS class to draw the arrow.
https://bugzilla.gnome.org/show_bug.cgi?id=682285
User testing has shown that it is not discoverable that the whole
lock screen can be dragged. A new mockup includes more arrows
and a short animation every 4 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=682285
Legacy tray icons may want to take a pointer grab to show a popup menu,
and this is incompatible with message tray modality. To solve this,
escape the tray when forwarding clicks to the tray icons, and wait
for the input mode change to actually synthetize the X event.
https://bugzilla.gnome.org/show_bug.cgi?id=682244
This makes sense if we want to follow what the following comment says:
// We also want to keep it onscreen, and separated from the
// edge by the same distance as the main part of the box is
// separated from its sourceActor
Using a magic number violates the "separated from the edge ...
separated from its sourceActor" part.
https://bugzilla.gnome.org/show_bug.cgi?id=682343
Each summary icon is 48x48 with a padding of 6px on each side. Thus,
each summary item is 60px wide. Therefore the summary mode should be
60px high instead of 72px.
Changed the tray actor to use a ClutterBinLayout so that it honors the
y-expand property of its children.
https://bugzilla.gnome.org/show_bug.cgi?id=682248
Previously, when toggling a switch on we tried to replicate NM policy and
find a good connection to activate. This is broken in many situations.
Instead, only activate something when we can be sure it's what the user
wants (i.e. when there is only one connection, or when there is none,
and thus connecting will trigger the config dialog)
https://bugzilla.gnome.org/show_bug.cgi?id=683136
In multi-monitor setups, the screen might extend below the edge of
the monitor that holds the tray. In that case the tray is currently
triggered from a secondary monitor, which is rather surprising;
change the check to use the correct monitor geometry instead.
https://bugzilla.gnome.org/show_bug.cgi?id=683044
PopupMenuBase relies on open-state-changed to update the separator
visibility, but PopupMenuSection were only emitting when the parent
closed, so the first time the menu was opened, separator visiblity was
wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=682998
The design has a combined volume-network-power indicator in the lock
screen, which when opened shows a volume slider. Implement it by abstracting
the volume menu into a PopupMenuSection, and by creating three StIcons
bound to the real ones.
https://bugzilla.gnome.org/show_bug.cgi?id=682540
The height of an unexpanded notification could include expanded
content if the notification has extra widgets (like actions and images),
so tweening to that cause it to expand visually.
Instead, use the height of the message tray before the restyle
as an upper bound.
https://bugzilla.gnome.org/show_bug.cgi?id=682738
Commit 22eea750 made info messages show up in the lock screen, but
as setShowWhenLocked() throws an exception when called on non-transient
notifications, the transient hint has to be set first.
https://bugzilla.gnome.org/show_bug.cgi?id=682268
Bumping overrides any animation, and causes the installed onComplete
not to run, which in turn breaks suspending from the user menu (as
it listens to lock-screen-shown).
Add a state variable (using an enumeration shared with messageTray)
to control the lock screen, and only bump when the lock is still.
https://bugzilla.gnome.org/show_bug.cgi?id=682746
Showing the removable devices is potentially a security risk (as
they include network shares). Also, a nautilus launched from there
can't be used, so it's just a way to overload the system.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
This makes the workspace indicator respect the "padding" style attribute.
Also, since we no longer draw the border on top of the thumbnail,
we need to be pixel-precise in allocating the indicator height.
We use this to make the workspace selector more similar to the mockup.
https://bugzilla.gnome.org/show_bug.cgi?id=662087
If the user has the mouse down - for example when they are selecting
text and dragging - then the attempt to get a modal grab will fail.
grabHelper: allow the .grab() function to fail and do nothing in this
modal case if the grab fails.
messageTray: handle grab failure and don't pop up the tray. Change the
logic for tray dwelling so that we only try to pop up the tray once
while the pointer is in the dwell area - this avoids the possiility
that the tray will pop up once the user releases the mouse.
https://bugzilla.gnome.org/show_bug.cgi?id=682385
Currently we load all search providers from XDG_DATA_DIRS, so if
the same provider is installed several times in different directories,
we happily show duplicate results. To fix, keep track of all remote
providers we add and skip those that already have been loaded from a
different directory.
https://bugzilla.gnome.org/show_bug.cgi?id=682470
The app menu is hidden when entering the lock screen, however it
might be shown again while the lock is still in place - we don't
want this ever to be the case, so make show() a no-op while the
screen is locked.
https://bugzilla.gnome.org/show_bug.cgi?id=682475
AutorunManager relied on AutomountManager to find if the session
was active, and this broke when this stopped exporting a public
method for it. Fix AutorunManager to have its own reference to
the LoginManager.
https://bugzilla.gnome.org/show_bug.cgi?id=682455
Currently we animate scrolling to the active workspace both when
the number of workspaces changed and after changing the active
workspace. So in case we don't actually change workspace, this
results in an unnecessary animation that may even have unwanted
side effects: when done during the overview transition (e.g. in
the case of opening and activating a window on an empty workspace),
non-active workspaces become visible during the transition.
To fix, don't scroll to the active workspace when the number of
workspaces changes and rely on the 'switch-workspace' signal being
emitted as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=682002
Since dwell at the bottom of the screen is now the primary way of
summoning the tray, removing the hot corner to avoid having two
separate things that can be accidentally triggered.
https://bugzilla.gnome.org/show_bug.cgi?id=682310
Don't log a warning if an unrecognized device type is seen.
Don't show slave connections in the menu. (Eg, don't show the
individual wired connections making up a bond, since they can't be
used individually.)
Make the icon only reflect the status of connections that are visible
in the menu. (ie, don't show the "connecting" icon when an
unrecognized connection type is connecting, and don't show a
"connected" status if the only active connections are of unrecognized
types.)
https://bugzilla.gnome.org/show_bug.cgi?id=682364
The fingerprint message is useful for users that click their
names in the user list to let them know if fingerprint login
is available.
This same place on screen (below the login entry) can potentially
be used for other messages as well.
This commit changes the variable and style names surrounding
this feature to be more generic.
A subsequent commit will leverage this functionality to provide
a hint on how to log in to the local enterprise domain controller
(if relevant).
https://bugzilla.gnome.org/show_bug.cgi?id=681975
If the user leaves the mouse pointer at the bottom of the screen for a second,
open the tray. This simulates the eventual plan of measuring "pressure" by how
far the pointer is moved past the edge of the screen. Measuring pressure will
take X server changes.
https://bugzilla.gnome.org/show_bug.cgi?id=682310
Right now, when entering the overview, we compute the window slots about
four or five times, from scratch each time. Move to a queued system where
extraneous calls to positionWindows don't matter.
https://bugzilla.gnome.org/show_bug.cgi?id=582650
Setting an IM presence only makes sense when connected to the
network, reflect this by making the presence chooser insensitive
when no network is available.
https://bugzilla.gnome.org/show_bug.cgi?id=677982
Trying to connect to IM servers while offline is pointless, in
particular now that we added a progress indication which makes
the connection attempt very visible.
To fix, wait for the network to become available until restoring
a previous IM presence.
https://bugzilla.gnome.org/show_bug.cgi?id=677982
The original code was assuming that getDay() on a Sunday would
return 7 rather than 0. This broke the "Next Week" logic
in several places.
This commit introduces a dayInWeek variable which takes the following
values on the according days:
weekstart = 1:
Mo: 0
Tu: 1
We: 2
Th: 3
Fr: 4
Sa: 5
Su: 6
weekstart = 0:
Su: 0
Mo: 1
Tu: 2
We: 3
Th: 4
Fr: 5
Sa: 6
Using this we can simplify and fix the conditional that decides
whether to show "This week" or "Next week" which was broken on
Sundays.
This commit also fixes the period that gets shown for "Next week"
on Sundays. Due to the bug it was 13 + 1 - 0 or 13 + 0 - 0 on
Sundays:
weekStart = 1:
saturday: saturday + 13 - day_in_week = saturday + 8 = sunday next week
sunday: sunday + 13 - day_in_week = sunday + 7 = sunday next week
weekStart = 0:
friday: friday + 13 - day_in_week = friday + 8 = saturday next week
saturday: saturday + 13 - day_in_week = friday + 7 = saturday next week
https://bugzilla.gnome.org/show_bug.cgi?id=682198
With the latest changes to the overview, the application view is now
clearly on a different level compared to the window picker. For that
reason it now makes sense to close it on Escape rather than hiding
the overview directly, as we do for search.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
Rather than relying on implementation details of StWidget's keyboard
navigation to "hide" the focusTrap from arrow key navigation, implement
the desired behavior explicitly in a custom widget.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Tabs used to provide an abstraction for a page and the control used to
activate it. As the latter has now been replaced with external controls
handled directly in the viewSelector, the abstraction itself doesn't make
much sense anymore. In preparation of replacing it, move the search
handling provided by the SearchTab directly in the viewSelector.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
We pass the dash’s showApps button to the viewSelector, and we connect it
to the showing and hiding of the appsView. This is necessary because there
are different mechanisms for switching the views, and it has to stay in
sync with the button’s state.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
In the new designs, we no longer need favRemoveTarget. As it shares a lot
of its functionality with the new showAppsIcon, we refactor and restyle it
accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
We’ll be repurposing the favRemoveTarget, which calls for it the be
permanently visibe. The favRemoveTarget used to be added to the dash when
needed and removed again when it wasn’t. This made that it always appeared
at the bottom of the dash. Now that we always show it, we also need to
explicitly define it to be at the bottom of the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
The entry should be positioned in the center of the overview. This makes
that its position can’t be set in the viewSelector without making things
overly complicated. Therefore we move the entry to the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
Design calls for views being accessible by other means than the current tab
system, so we have no longer a need for the public viewTab API. Move the
initialization of tabs to the viewSelector and make
viewSelector.addViewTab() private.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
The original design for the overview had buttons for searching for
Wikipedia and Google, but in practice this is a bad idea. The buttons
are the default activations, meaning that using the overview as a
fluent motion of launching something - "firefxo<Enter>", will launch
Google/Wikipedia.
https://bugzilla.gnome.org/show_bug.cgi?id=670168
This code was originally here to close the summary box pointer if it was
already open, but it seems that it isn't necessary, and is causing all
sorts of problems.
Displaying a close button provides a discoverable way to close notifications.
Clicking the close button on new notifications, dismisses them, but doesn't
remove the notification source from the message tray if it is resident.
Clicking the close button on summary notifications acts the same way as clicking
"Remove" option in the right click menu, which is to remove the notification
stack and its source, even if it is resident or a tray icon.
When we enter the overview, we don't explicitly don't take a grab, so we
shouldn't connect to key-focus-changed and things like that, otherwise
random overview code will drop our grab for us.
This fixes escape in the overview not dropping when a notification is up.
Make sure to account for modalCount properly, rather than just
tracking modalCount for the last actor on the stack. Additionally,
traverse the popped actors in the reverse order so that onUngrabbed
callbacks are called at the proper place in time.
If the user is already active when the notification pops up, we
won't get an idle watcher because there's no transition from
active to idle or vice versa. Correct this by initializing the
state correctly from XSync.
StScrollBar was intercepting motion events by using captured-event on
the stage, which required additional dirty tricks, which required
additional hacks. Simplify it by just using clutter_grab_pointer()
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
The designers would like the message-tray to use different styles
depending on whether it is shown in the overview or not, so use
an :overview pseudo class as the top bar.
1) straddling windows get clipped at the monitor boundary
2) we move the bottom monitor and not the primary because that is
where the tray is
3) to stop the wallpaper from the bottom monitor leaking into the
primary, we adjust the clip as the clone animates up/down
https://bugzilla.gnome.org/show_bug.cgi?id=681392
The unlock dialog has a mechanism for manually typing in a username
and password. This mechanism is mislabeled:
Login as another user
when it should be labeled
Log in as another user
This commit adds the space.
Spotted by Stef Walter <stefw@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=681750
Various code around had different paths for ConsoleKit and
logind. Consolidate it by making an abstract class that all
callers can use, which hides the implementation details of the
two daemons.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
Instead of manually tracking source icon changes, or requiring a manual
call to _setSummaryIcon, add a way to emit a signal when we're guaranteed
the icon has been changed, and then the source actor will automatically
update the icon.
_setSummaryIcon is still available for sources such as the notification
daemon, that require special treatment for the summary icon (to be used
with tray icons)
https://bugzilla.gnome.org/show_bug.cgi?id=680426
In preparation for accessing it in the screenshield, factor out
common code for ConsoleKit and Systemd.
Also, clean up ConsoleKit manager, as the daemon is required in
a non systemd installation. In particular:
- We allow it to be autostarted at session startup (or really,
we expect it to be already there, started by GDM during session
opening).
- We no longer silently assume that the session is active if
it can't start.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
In some cases can_focus value is taken directly as
!reactive. But this is not the case anymore, as
we are interested on navigate on non reactive items
https://bugzilla.gnome.org/show_bug.cgi?id=667439
We need to make sure the Source is fully constructed before creating
mainIcon, as SourceActor will query the count of the source.
This fixes Telepathy Chats.
https://bugzilla.gnome.org/show_bug.cgi?id=682045
Now that GDM no longer emits auth failures after 25 seconds, we
need to handle inactivity ourselves.
This has also the advantage that it tracks real inactivity, rather
than a timeout from a fixed point in time.
https://bugzilla.gnome.org/show_bug.cgi?id=682041
It doesn't make sense to have multiple ShellIdleMonitors, since
each has its own GDK filter function, but they all get the same
events. In preparation for having it accessed from other places
than the message tray, make it a singleton.
https://bugzilla.gnome.org/show_bug.cgi?id=682041
When pressing a key different from escape (one thus that has no
effect), bump the screen up, to indicate that it eats keyboard
input and it must be lifted up.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
This is a temporary patch. The user menu button needs to move to
the left, and the a11y menu in some cases needs to be hidden outside
of the screen lock too.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
Use the new monitor constraint to place the clock and notification
box on the primary monitor only. The background is still extended
to the whole screen.
Get rid of the LockDialogGroup hack, now that ClutterBinLayout
respects fixed position correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=681743
This commit makes ModalDialog use the new MonitorConstraint instead
of custom code to force itself on the right monitor.
At the same it ports wanda, which has something similar to a modal
dialog, but is not using the ModalDialog module.
https://bugzilla.gnome.org/show_bug.cgi?id=681743
Instead of connecting manually to LayoutManager, or using ShellGenericContainer,
make a ClutterConstraint subclass that can track automatically
a specific monitor index, or the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=681743
The fade animation we started using after centering attached
modal dialogs didn't work too well. So after going back to the
scale animation, adjust it to scale from the center rather
than the top, which works quite well.
https://bugzilla.gnome.org/show_bug.cgi?id=681601
The combination of desaturating and lowering the brightness does
not work too well in all cases, in particular for applications
using the dark theme variant. Dropping the desaturation effect and
making the brightness adjustment more profound gives a better
result.
https://bugzilla.gnome.org/show_bug.cgi?id=681601
Use the new OVERLAY_KEY keybinding action instead of special-casing
the overlay-key to make sure the same key will be used in- and outside
the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=665547
If automatic lock is disabled in the control center, only lock
when explicitly using the Lock menu item, and not for Suspend or
Switch user/session.
https://bugzilla.gnome.org/show_bug.cgi?id=680231
Rework the count system in Source, to distinguish between the
normal notification count and the count of unseen/unacknowledged
notification. (A notification is considered unacknowledged until
shown, as a banner or inside the summary box pointer).
Includes some code cleanups and a test for multiple notifications
in the same source.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
If a source is associated with an app, ignore the app name provided
by libnotify, as that is often garbage.
This fixes the "XChat-GNOME OSD" problem.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
Reduce padding around persistent sources, and ensure that spacing
around resident notifications is only applied once.
Also, add some padding to the clock.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
As description of the setting says, color-saturation ranges from
0.0 (grayscale) to 1.0 (full color), but the real outcome was the
opposite. The reason is that clutter provides a desaturation effect,
and color-saturation was passed directly to that effect. This patch
renames the effect and compute the desaturation value.
GetUserVerifier can only be called from the greeter session,
and fails with AccessDenied in all other cases. Also, calling it
hides the real error from OpenReauthenticationChannel, which
instead should be logged.
https://bugzilla.gnome.org/show_bug.cgi?id=680750
gnome-session and gnome-settings-daemon rely on the screensaver
interface to know the locked state. Since gnome-screensaver is no
longer running, it's up to gnome-shell to provide it.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
When the screen shield is activated from the user menu, animate
it instead of showing it abruptly. Also, ensure that the animation
had time to finish before calling UPower to suspend, to avoid
showing it when resuming.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Track screen lock status in the message tray, and filter banner
notifications. The message tray is completely hidden when the screen is
locked, but exceptions can be made for individual transient notifications,
such as shell messages and the on screen keyboard.
Non transient sources are shown in the middle of the lock screen. Resident
notifications (such as those from Rhythmbox) are shown in full, while
persistent ones are displayed as icon and message count.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Track locked status and use it to provide a reduced version of
the panel in the locked screen. Accessibility, input sources and
volume menus are preserved, without the link to the control center.
Network, battery and user menu are reduced to pure indicators,
with no menu.
This is similar to the design but not exactly, because designers
in IRC said that network needs more analysis before exposing, and
because the design didn't account for a11y and IM (so the one menu
metaphor is not really appropriate).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
The design calls for the curtain to appear in the gdm greeter too.
Implement this by having the screenshield manage the login dialog
(delegating its creation to SessionMode).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
This separates the screen shield into two main screens. One is
the lock screen, and it is shown when coming back from idle status
and when failing authentication. The other is the actual unlock
dialog.
Moving from the first to the second is possible by pressing Escape
or by dragging an arrow on the bottom on the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
This ensures that the screen shield is created at the right
stacking level, so the message tray is visible in the lock screen
(showing PAM messages, critical notifications and the on screen
keyboard)
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Ensure that the lightbox is above everything (including the screenlock
itself) when fading in - this allows for fading while showing the
unlock dialog. Also, don't pushModal again when already locked, or
we won't get out of it.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
When the screenshield is deactivated, instead of going back to the
session immediately, prompt the user for authentication.
This essentially reinstates what used to be provided by gnome-screensaver.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
We are replacing the gnome-screensaver module with with a screen shield
that is part of gnome-shell.
This patch fades out the screen on idle and shows a shield with a background
image when there is activity again. The shield can be removed with a key or
button press.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Add 'default' parameter to setButtons, that controls the binding
of Return (unless overridden) and applies the 'default' pseudo-class.
Currently it has no effect, but it will start having after the
login dialog redesign.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
To allow more than one summary icon actor for a source we split
the model of the source icon (which is iconName, if the default
implementation is used, or a GIcon otherwise) and replace
createNotificationIcon() with a generic createIcon(size). Also,
the actual source actor is split into a separate class, that handles
the notification counter automatically.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
The :reactive property is used on StButton to like the :sensitive
property on GtkWidgets, that is, to indicate that the user is not
(yet) expected to click the button, and therefore should affect
styling too.
This allows to remove some code at the JS layer.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Previous code would access the array element before checking that
the index was within bounds, and therefore cause a TypeError.
It wasn't noticed earlier because at least one visible children
is in each panel box in all session modes.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Destroyed modal actors should be completely removed from the modal
stack automatically, including leaving modality if needed.
This allows for destroying modal dialogs without calling close().
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Change visibleInFullscreen to be trackFullscreen. If true, visibility
is fully bound to fullscreen status, if false, no change is made.
This allows to avoid set_skip_paint(), while not messing with
visibility of actors that are sometimes hidden for other reasons.
The flag was reversed because only the panel uses it, so false is
a more useful default.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Make it possible to control the visibility of "Show/hide text" item
at runtime, to reuse the same entry for both password and non-password
prompts.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
When GDM was moved over to GDBus it dropped the libgdmgreeter
library and introduced a new libgdm library with a somewhat
different API.
The main differences in the API are:
1) open_connection is now implicit and automatic
2) conversations don't need to be started explicitly, they're
started just-in-time when verification is requested
3) The functions are split up between the client, and new
helper objects that correspond to the dbus interfaces
they were generated from (one for user verification,
one for greeter specific operations, and a couple more
that aren't used by gnome-shell).
4) libgdm supports reauthenticating in an already running
session, so user switching should now affect the users
session more like screen unlocking does.
This commit moves the shell over to the new library.
Based on work by Giovanni Campagna <gcampagna@src.gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=676401
As part of wanting to reuse some of the looking glass components,
don't use Main.lookingGlass, but instead pass the parent around.
Don't adjust the evaluator just yet, though. We'll split it into
a separate class soon.
https://bugzilla.gnome.org/show_bug.cgi?id=679944
This makes sense, since we are covering input methods and keyboard
layouts in the same keyboard menu. The effect of this change is that
the ibus status icon no longer appears in the system status area.
Changing the number of workspaces while the popup was visible (which
happens when moving windows on the last non empty workspace) resulted
in a wrong layout. Fix that, by listening to workspace-added and
workspace-removed signals, and by always requesting an updated size
from the actor.
https://bugzilla.gnome.org/show_bug.cgi?id=679005
We connect to the IBus daemon asyncronously and use it to query info
about input sources of the type 'ibus'. In case the daemon is or
becomes unreachable we just skip showing input sources of this type.
https://bugzilla.gnome.org/show_bug.cgi?id=641531
The calendar grid is build by giving each element right and bottom
borders, all top-most elements a top border, and all left-most
elements a left border. However in RTL locales, we currently add
the left border to the *right-most* elements, resulting in the grid
appearing clipped on the left side.
https://bugzilla.gnome.org/show_bug.cgi?id=679879
While modal dialogs were attached to the parent's titlebar, it
made sense to leave the top of the parent window at full color.
With the new position of modal dialogs, it makes more sense to dim
the entire parent window, so we can use a combination of Clutter's
BrightnessContrast- and DesaturateEffect instead of our own custom
shader.
https://bugzilla.gnome.org/show_bug.cgi?id=674499
With modal dialogs no longer being attached to their parents'
titlebar, the current animation no longer works too well. Use
a simple fade animation instead.
https://bugzilla.gnome.org/show_bug.cgi?id=674499
Show a notification when we receive a show-unmount-progress signal on
the mount operation we use for unmounting.
The notification will either turn fade out automatically with a
completion message when the unmount successfully completes, or will
disappear in case the operation is aborted underway (for example because
the device has been unplugged in the meantime).
https://bugzilla.gnome.org/show_bug.cgi?id=676125
When activating the app menu while displaying a startup notification
animation, the application shown in the menu does not match the
application providing the menu. To avoid this case, make the menu
button unreactive while playing the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=672322
This is a bare-bones copy/replace. It does not implement ChangeLog
support. If we cannot get System Updates integration, I will implement
notification support.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When PackageKit signals that it prepared an update, offer an option
to reboot and apply it, using a helper that will setup the next
reboot and then calling to gnome-session.
https://bugzilla.gnome.org/show_bug.cgi?id=677394
This commit adds a grayscale effect to the magnifier, similar to
the lightness, brightness and contrast effects that are already there.
The effect is configured with the
org.gnome.desktop.a11y.magnifier.color-saturation setting, which
can take values from 0.0 (grayscale) to 1.0 (full color).
Based on a patch by Matthias Clasen <mclasen@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=676782
When connecting to virtual machines with usb-device redirection, such as Spice
enabled vms, automount may get in the way. Specifically if auto-usbredir is
enabled in the vm-viewer, then the usbredir code and the automount code race
for who gets to the device first.
If the automount code wins the race this is a problem, since usbredir causes a
device-disconnect (iow the usb mass storage driver sees an unplug), so in the
end usbredir always wins, and we end up with a non clean potentially corrupt
filesystem. Also see:
https://bugzilla.redhat.com/show_bug.cgi?id=812972
There for the need exists to be able to inhibit gnome-shell's automounting,
since all other inhibits run through gnome-session, I've chosen to do the same
for the automount-inhibiting. I've also submitted a patch to gnome-session to
reserve flag value 16 for this, see bug 678595.
This patch adds support to gnome-shell to honor this new inhibit flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=678597
The log messages about presence changes unnecessarily cluttered the
notification.
Instead, we now present the presence states (online, offline, away, busy)
with an icon placed right next to the avatar. We also no longer show
notifications on presence changes.
https://bugzilla.gnome.org/show_bug.cgi?id=669508
When selecting "Open Calendar" in the date menu, the configured
application is launched via command line, so we don't get any
startup notification. If Evolution is used as calendar application,
launch it via the .desktop file added by the last commit instead in
order to fix the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=677907
By disconnecting the 'notify::connection-status' signal as soon as the account
is disabled, we were missing the signal telling us when the status was moving
from CONNECTING/CONNECTED to DISCONNECTED and so the status icon was never
updated.
What we really want is to disconnect the signal when the account is removed
from the account manager as we don't care about it any more.
https://bugzilla.gnome.org/show_bug.cgi?id=669112
Use our native JS error system in the "extension system" API, only
using the signal/log-based error reporting at the last mile. Additionally,
delete the directory if loading the extension failed, and report the error
back over DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
Instead of using the 'extension-state-changed' signal to relay errors,
use DBus's native error mechanism to inform the method caller that the
call has failed. This requires making the method actually asynchronous
so that we don't block the browser, which is stuck waiting for a reply
from the browser plugin. To ensure this, we need to modify the browser
plugin API to ensure its extesion installation method is asynchronous.
Additionally, this lets us remove the awful, broken hacks that we used
when a user clicked the "Cancel" button, replacing it by a DBus return
value.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When the extension downloader was originally designed, the information
downloading part was inserted at the last minute, along with the modal
dialog as a security feature to make sure an extension didn't silently
get installed on the user's machines either due to a security issue in
the browser-plugin, or an XSS issue on the extensions website. Correct
the mistake I made when writing the code; instead of dropping an error
on the floor, log it correctly. This "bug" has already bitten a number
of users who forgot to configure proxy settings in the control center.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
Pam seems to give us different strings, sometimes 'Password:',
sometimes 'Password: '. Look for both of these when replacing
them with a translated prompt.
https://bugzilla.gnome.org/show_bug.cgi?id=675300
The current position below "System Settings" is problematic - the
items are unrelated, and misclicks will result in a scary system
modal dialog that has to be cancelled.
Move items around a bit to avoid this problem.
https://bugzilla.gnome.org/show_bug.cgi?id=678887
Right now the "move to workspace" keyboard shortcut transition isn't smooth. It
shows the window disappearing, hopping to the next workspace, and then sliding
into view. "Pin" the window to the stage while the animation is in progress,
then release it afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=660839
Install a custom handler for move-to-workspace-* keybindings that
shows the workspace switcher, which gives the user a sense of
direction when navigating with the keyboard.
https://bugzilla.gnome.org/show_bug.cgi?id=674104
Most of code implementing workspace switches was repeated with
minor differences on each direction. Instead, consolidate it
and use the new meta_workspace_get_neighbor.
https://bugzilla.gnome.org/show_bug.cgi?id=674104
When using dbus-glib, single return values were special-cased to
be returned verbatim rather than as array with a single element.
This is no longer true since switching to GDBus, so fix the places
where the change was overlooked.
https://bugzilla.gnome.org/show_bug.cgi?id=678852
We strongly expect applications to use the same values for the
'Title'/'Icon' fields in their search provider .ini file as the
'Name'/'Icon' fields in their .desktop file. Rather than requiring
applications to duplicate those fields, allow them to specify a
'DesktopId' field instead to point to the corresponding .desktop
file, which makes it possible to ship search provider files without
translatable strings (which is nice given that merging translations
into search provider files lacks a standard rule).
https://bugzilla.gnome.org/show_bug.cgi?id=678816
Currently we pass an icon name for the 'icon' parameter of the
RemoteSearchProvider constructor. In hindsight, using a GIcon
instead will give us a bit more flexibility, so change it.
https://bugzilla.gnome.org/show_bug.cgi?id=678816
Use the ShellMountOperation dialogs we have to implement a DBus API
allowing other processes to display them.
Since GtkMountOperation now tries to call into our DBus implementation,
every application that uses a GtkMountOperation will gain integration
with our shell dialogs (but will still handle the actual communication
with GVfs).
https://bugzilla.gnome.org/show_bug.cgi?id=678516
Wait until the completion of the mount operation before dismissing the
passphrase dialog, so in case it fails, we can re-use the same dialog
with an error message (like e.g. PolicyKit auth dialogs) instead of
showing a brand new one.
https://bugzilla.gnome.org/show_bug.cgi?id=674962
Wifi and mobile broadband have signal indicators and are thus
more useful than vpn icons in the panel. Therefore, in the case
we have both wifi/3g and VPN we prefer the former as the "primary
icon" and add a lock next to it.
Behavior when VPN is added to wired or other connections is still
preserved: the wired icon is replaced by vpn.
https://bugzilla.gnome.org/show_bug.cgi?id=672591
Sorting by strength is what the other OSes do by default, and it
provides a better UX (by offering your hotspot and router before
the one from your neighbor).
https://bugzilla.gnome.org/show_bug.cgi?id=658946
Only apply the allowAutorun flag for transient notifications, not for
mounts that end up in the resident notification well.
Also, stop looking at volume.can_automount() here, since we already
checked that previously in the mounter, and allowAutorun is enough.
https://bugzilla.gnome.org/show_bug.cgi?id=660595
Previously, a volume was being ignored from autorun if one of these two
conditions were met:
- its mount root file had a native scheme and was mounted in a
non-hidden location
- it had a volume that could have been automounted, and had a flag set
by the shell to allow autorun
In order to effectively ignore volumes that we don't mount ourselves
from our notification system, we have to meet both conditions at the
same time instead.
https://bugzilla.gnome.org/show_bug.cgi?id=660595
This is a fallout from some changes in MessageTray.Source, which now
requires either defining the iconName/iconType properties on it, or
implementing createNotificationIcon, and we're not doing any of those.
Fix it by storing the gicon of the source object and using a helper
method to create the icon actor on demand, to avoid any case when the
same actor might be added twice to different containers.
https://bugzilla.gnome.org/show_bug.cgi?id=678428
The dependency chain spirals out from folks->zeitgeist->xapian...and
I'm really not interested in pulling in all of that into the core
shell.
There is work on splitting out contact search into gnome-contacts; I'd
add a bug link but Bugzilla is down.
When the shell takes control of the screen (for example to show
a modal dialog or to lock the screen), it must reestablish itself
on top of the stack, and in particular restore any unredirected
window so that it is composited below the Shell UI.
Reviewed-By: drago01 in IRC.
There is a race if a channel is invalidated during its preparation: the
'invalidated' signal is already emitted so the Shell will never notice.
We fix this by simply checking if the channel is already invalidated when
receiving it from telepathy-glib.
In the approving case, we reject the full ChannelDispatchOperation as we only
support approving one channel at the time.
https://bugzilla.gnome.org/show_bug.cgi?id=677457
Initially, extensions were loaded after they shell had fully created
the session and all objects, but this didn't allow extensions easy
ways to monkey patch prototypes, as most functions had already been
bound. Remove the historical vestigal function, and just merge the
two together.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
A large amount of extensions have something like this in them:
function init() {}
Since we have encouraged extension authors to try and not make any
changes in init, it feels weird and strange to have to create an
initialization function that does nothing. From now on, don't require
it.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
This allows us to move to a file-monitor based approach in the future.
Since we need signals, we convert the current set of functions to an
object we attach signals too, leading to the new ExtensionFinder object.
https://bugzilla.gnome.org/show_bug.cgi?id=677586
We explicitly include NoDisplay applications in the ShellAppSystem because
we want app tracking for them, but we explicitly filter NoDisplay applications
out when showing them to the user because we don't want to show them to the
user. We also based our "All" apps view on a flattened list of apps. While
we did check for NoDisplay on the app item itself, we didn't check against
its parents. Refactor the app display view to not use a separate flat list
of applications, but instead a concatenation of all the applications in all
the loaded categories.
https://bugzilla.gnome.org/show_bug.cgi?id=658176
clutter_actor_get_children requires making a temporary GSList from
a linked list structure, and then creating a JS Array from that GSList.
For simple cases like the number of children, use clutter_actor_get_n_children.
https://bugzilla.gnome.org/show_bug.cgi?id=677426
Show the dialog on the monitor containing the pointer, rather than
the monitor with active focused window. This brings it inline with
the behaviour seen when launching applications.
Remove the focusMonitor/focusIndex from LayoutManager. These
properties were only used by the modal dialogs. Remove them since
they are not being used elsewhere.
https://bugzilla.gnome.org/show_bug.cgi?id=642591
Don't show non urgent notifications when the primary monitor
is in fullscreen (user watching a movie, having a presentation,
playing a game ...).
Once the user leaves fullscreen show the messagetray so that the user don't
miss any notification (same as in "back from idle").
https://bugzilla.gnome.org/show_bug.cgi?id=677590
Do not overflow currentItems array. If the Menu section is filled
via model items-changed callback the position in the model passed to
the RemoteMenu _modelChanged can be a to be added asynchronously
action-added. Thus the item does not yet exists in the currentItems.
https://bugzilla.gnome.org/show_bug.cgi?id=676447
_startTimer adds a tweener to implement the description countdown, which
updates the entire content on each iteration, including the icon. This
causes a significant impact on performance, especially when accessibility
is enabled, as it causes a flood of AtkObject:state-change:showing events.
As the countdown only affects the description, factor out _updateDescription
and use it in _startTimer, and only do a full update of all contents when
necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=674210
When displaying children, we need to make sure that we use the rowLimit
property that we pass to iconGrid, rather than assuming that it's
always MAX_SEARCH_RESULTS_ROWS in case some subclass (in an extension maybe)
wants to do something different.
https://bugzilla.gnome.org/show_bug.cgi?id=675527
Depending on the number of accounts, the type or simply the network,
there may be a noticable lag between setting the status and the actual
status change.
Use the new user-status-pending icon to indicate progress.
https://bugzilla.gnome.org/show_bug.cgi?id=659067
Refactor NMDeviceVPN to be more like the other NMDevices, including
having a valid getSectionTitle() and emitting signals when the
underlying connection changes state.
Use the existing notification infrastructure to hook these signals
to actual notifications (including some code consolidation).
https://bugzilla.gnome.org/show_bug.cgi?id=676330
Currently we only connect to the 'notify::n-workspaces' signal the
first time the overview is shown, which means we will miss any
changes to the workspace layout in the meanwhile.
In particular, the decision of whether the workspace switcher should be
shown is taken before the dynamic workspace handling takes over, and is
thus based entirely on the value of the num-workspaces user preference
rather than the actual number of workspaces.
Just connect the signal in _init() (with the nice side-effect to make it
explicit that the signal handler won't ever be disconnected).
https://bugzilla.gnome.org/show_bug.cgi?id=673198
role/label_actor should be used for the actor that will receive
the focus. In some cases it was also (wrongly) set on the
container, so using an AT like Orca, it exposed both.
https://bugzilla.gnome.org/show_bug.cgi?id=672242
It's used right away to discard some Empathy notifications.
This regression has been introduced during the 3.4 cycle when 'hints' has been
turned to a GVariant.
https://bugzilla.gnome.org/show_bug.cgi?id=675370
Ensure that the UI is updated when a connection changes name or id,
even if it was already known by a device.
Also, use less private properties on NMConnection objects, as they
can become stale and cause problems.
https://bugzilla.gnome.org/show_bug.cgi?id=677097
We now drop all status icons that are not explicitly enabled, which
breaks the ibus icon. Add it to the list of allowed icons until we
merge it with the keyboard one.
https://bugzilla.gnome.org/show_bug.cgi?id=677058
These methods were initially introduced when I was planning on having
an explicit DisableExtension/EnableExtension, instead of hooking up
a gsettings notify. This behavior was changed at the last minute, but
the methods were kept to avoid having to change the browser-plugin.
Consumers of this API should just set the GSettings key directly
instead now.
https://bugzilla.gnome.org/show_bug.cgi?id=676837
In Shell.SessionType.USER mode, two separate setup functions were
used during startup. With the new feature-based checks, the second
one is now almost empty, so move its remaining code into the first
function and remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Add a sessionMode.allowKeybindingsWhenModal property, which determines
whether keybindings should still be handled while a modal dialog is
up or not.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Instead of falling back to a set of default values or crashing the
window manager when an invalid mode is specified, check the value
of the ShellGlobal:session-mode property before taking over as WM
and make a clean exit if it cannot be resolved to an existent mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Rather than accessing global.session_type / global.session_mode
all over the place, delegate mode information to a dedicated
sessionMode object. While not very useful for now, we will replace
checks for a particular mode with checks for particular properties
that sessionMode defines based on global.session_mode.
https://bugzilla.gnome.org/show_bug.cgi?id=676156
Since commit 518282e169, we hide both "Switch User" and "Log out"
on single-user systems. However, if there is more than one session
available, users may still want to get back to the login manager
to change sessions.
Add both "Log out" and "Switch Session" items in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=675802
Bluetooth PINs are required to have 6 digits, so enforce that
condition by making the PIN request notification's confirm
button insensitive unless the entered PIN has the correct length.
https://bugzilla.gnome.org/show_bug.cgi?id=651251
The availability of a notification action may depend on conditions,
so add a method to control the sensitivity of buttons which have
been added with addButton().
https://bugzilla.gnome.org/show_bug.cgi?id=651251
When the appMenu is not available, for instance when no windows are
open (on the current workspace), we make its actor unreactive to
"hide" it from keynav. However the menu can still be triggered
erroneously when using the corresponding keyboard shortcut, so
add a check for the actor's reactivity there as well.
https://bugzilla.gnome.org/show_bug.cgi?id=676316
For most subclasses, this is a direct swap -- a lot of the time, the
constructor was a blank class that override createNotificationIcon,
and called _setSummaryIcon in _init.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
Rather than ask most users of Source to subclass it to simply set their icon,
just allow them to create a new instance and add it without any complex magic.
https://bugzilla.gnome.org/show_bug.cgi?id=661236
Technically those are minor changes, but people will love us anyway:
- change the default of the <alt>ernative to "Power Off"
- remove "Online Accounts" item
- regroup the remaining items
- remove ellipses from labels
https://bugzilla.gnome.org/show_bug.cgi?id=675802
Now that all searches are async we can remove the code path for the
SearchSystem::search-completed signal which is no longer useful.
This patch ends up fixing the status text not being updated for when
there are no results.
https://bugzilla.gnome.org/show_bug.cgi?id=675328
As shown in the previous commits, synchronous search is easily implemented
by the asynchronous search API. The only reason we still have a
synchronous search API is of historical reasons. Well, we're not a museum,
and git log can keep our fossils safe if need be....
https://bugzilla.gnome.org/show_bug.cgi?id=675328
To allow this to happen, we need to make sure that we don't overwrite the
previousResults when calling the async method. Note that this is a bug of
some sort, we were already using this synchronous style when a remote
search failed.
https://bugzilla.gnome.org/show_bug.cgi?id=675328
On the code two labels are created. One is used on the date menu
itself, and the other for the menu icon at the top panel. The wrong
label was used as the label_actor for the top panel menu icon.
https://bugzilla.gnome.org/show_bug.cgi?id=675307
Pausing means that we will continue to use the same output file when
the keybinding is activated again. While useful to record a single
video in chunks, it doesn't seem to be how most users understand the
keybinding. Closing the recorder will close the file and create a new
one the next time the keybinding is pressed.
https://bugzilla.gnome.org/show_bug.cgi?id=675128
Two nested scroll views were fighing with each other. The reason isn't
particularly important and has to do with some silliness involving
StAdjustment. The visible effect was that scrolling up and down when
in a summary item view would appear to be glitchy, and sometimes not
work at all.
To fix, make sure that the scroll view we don't care about is disabled
when in a summary mode.
https://bugzilla.gnome.org/show_bug.cgi?id=661615
There have been multiple notifications ever since we had a notification stack
per source, so the idea of one notification being on screen at a time has long
been dead.
https://bugzilla.gnome.org/show_bug.cgi?id=661615
We seem to have a lot of code that does something along the lines of:
if (condition)
actor.show();
else
actor.hide();
ClutterActor already has such a thing for exactly this purpose: the 'visible'
property. Use it instead of the mess above.
https://bugzilla.gnome.org/show_bug.cgi?id=672272
We hide the content around displaying new search results to prevent
flickering, unfortunately, one side effect of hiding an actor is
losing key focus if it currently is on the that actor or any
child. This could happen in the case of async results showing up after
the user had moved focus to the search results.
This patch works around that issue by saving the key focus and
resetting it back after displaying the new async results.
https://bugzilla.gnome.org/show_bug.cgi?id=675078
We already have one too many logging systems. Remove the errors tab
and make global.log/global.logError point to window.log/window.logError
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=675104
The keybinding to toggle the screen recorder was implemented as a
signal on MetaScreen, as keybindings could only be defined in mutter
core. As this is no longer the case, we can move the binding into the
shell where it belongs.
https://bugzilla.gnome.org/show_bug.cgi?id=674377
When receiving another message or responding in a new expanded chat
notification that has no prior chat history, the notification moved down
below the edge of the screen instead of expanding up, making part of it
invisible. Avoid this by making sure the notification's position is updated.
https://bugzilla.gnome.org/show_bug.cgi?id=661944
A BindConstraint on the size of uiGroup forces full redraws of the scene.
Instead, implement and use get_preferred_width and get_preferred_height.
https://bugzilla.gnome.org/show_bug.cgi?id=670636
Commit 26580f8f reintroduced an optimization on style changes to avoid
creating icons unconditionally. As this breaks icon theme changes (for
instance when toggling "High Contrast" in the universal access menu),
remove it again.
https://bugzilla.gnome.org/show_bug.cgi?id=672941
nm_active_connection_get_devices() has a (questionable) special case
for the no devices case (which happens if the DBus object is
destroyed because NM went down): it returns null instead of an empty
array. Handle that instead of crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=673043
With the application menu now being more than a stub, it has
become a much more interesting target, so add a keyboard shortcut
to open it directly.
This should also ease some of the pain for focus-follows-mouse users.
https://bugzilla.gnome.org/show_bug.cgi?id=672909
StBoxLayout currently does not handle height-for-width children
correctly under some circumstances. As a work-around, hard-code
a label height of two lines of text, which should work for most
locales in the one place the widget is currently used.
https://bugzilla.gnome.org/show_bug.cgi?id=672543
We currently require users to tab away from the search entry before
search results can be navigated using arrow keys. For convenience,
support using arrow keys directly from the entry.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
To avoid messing up St.Buttons' internal state with a pointer grab,
we wait for the pointer to leave the actor before starting the
drag operation manually. This works generally fine, but makes starting
a drag operation harder than necessary. To fix, enforce a reasonable
button state when starting the drag, rather than special-casing buttons
before the drag.
https://bugzilla.gnome.org/show_bug.cgi?id=637103
Currently, click and drop events are handled by each WorkspaceThumbnail
instance. With the introduction of the workspace cut and the request
to extend the reactive area of the workspace selector to the edge
of the monitor, it becomes more convenient to do all the event handling
inside ThumbnailsBox, even if this requires some manual layout computation.
https://bugzilla.gnome.org/show_bug.cgi?id=643319
Two small fixes which made _showNewStyleDialog() err out:
- g_key_file_load_from_data() expects a string as first
argument, but g_buffered_input_stream_peek_buffer()
returns an array of "data"
- g_key_file_load_from_data() is documented to allow -1 as
length parameter for \0-terminated strings, but the actual
type of the parameter is unsigned (d'uh)
https://bugzilla.gnome.org/show_bug.cgi?id=671556
Tweener uses a clutter timeline to manage all active animations
running at a given moment. The timeline is mopped up when no
animations are going any more.
Clutter requires timelines to have a finite duration, but since
animations can happen at any moment, no fixed duration can
accomodate the shell's needs.
To combat this problem, the tweener code picks a relatively
long duration: 1000 seconds. No string of animations should take
that long, so, in theory, that should be good enough.
Unfortunately, this tactic fails, in practice, when the user
suspends their machine, or VT switches. An animation can take
much longer than 1000 seconds (~16 minutes) to complete in those
cases. When the user resumes, or VT switches back the timeline
completes immediately (since it's already late) and tweener
never notices that the timeline stops ticking.
This commit changes the tweener timeline to automatically loop
back to 0 after completing, so that despite its fixed duration
property, it effectively never stops. Since the timeline loops,
its concept of elapsed time no longer increases monotonically,
so we now ignore it and track time ourselves with
GLib.get_monotonic_time().
This partially reverts commit
35764fa09e.
https://bugzilla.gnome.org/show_bug.cgi?id=653833
Some objects have a resolve hooks that throw exceptions, so just
checking "'actor' in object" can fail. In that case we should catch
the exception and return the standard toString() value, or the
object cannot be inspected from the looking glass.
https://bugzilla.gnome.org/show_bug.cgi?id=671410
We currently only update the status chooser's sensitivity if accounts
are added, removed or enabled; unfortunately during account creation,
the account may become enabled before it is actually valid, so the
status chooser remains insensitive. Fix by listening to validity changes
as well.
https://bugzilla.gnome.org/show_bug.cgi?id=672265
Instead of duplicating the vendor prefix search in the endSessionDialog code,
just use lookup_heuristic_basename, which is used with real app tracking.
https://bugzilla.gnome.org/show_bug.cgi?id=672270
gnome-session moved away from using properties over DBus in 2008, which
means that the code in GNOME 3.0 never should have worked -- but it did,
which makes me suspect that it was a quirk of the GJS DBus implementation.
Switch over to the proper inhibitor API, which is based on methods. If
gnome-session eventually gets ported to GDBus, then we can switch back
to properties.
https://bugzilla.gnome.org/show_bug.cgi?id=672270
Bailing out of _sync() early if the application lost keyboard focus to
the shell can only be done on actual application focus changes. In
particular, doing this check on a switch to an empty workspace while
the keyboard focus is already on the shell prevents the AppMenuButton
from being hidden as it should.
https://bugzilla.gnome.org/show_bug.cgi?id=672011
Reactive means that the actor is reachable from keyboard
navigation. If the target isn't current that means we are not tweening
the actor to be visible so we shouldn't set it reactive either.
https://bugzilla.gnome.org/show_bug.cgi?id=671998
If the user has their mouse over the workspace thumbnails while
entering the overview, it's more likely that it's a coincidence
that their mouse pointer is in the area. Avoid expanding the
thumbnails box in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=651092
In the workspace-collecting code we add a check to avoid collecting a
workspace if any startup sequence is running there. Since the sequence
can take some time to load, an helper function is also added which keeps
the (empty) workspace around for a very short time, while waiting for the
sequence to start.
https://bugzilla.gnome.org/show_bug.cgi?id=664202
If the user was inactive while a notification was shown, we show the summary
when the user becomes active again. This ensures that we inform the user of
the existance of new notifications that the user might have missed.
When the user comes back from away, the summary is now only shown if it has
new notifications.
https://bugzilla.gnome.org/show_bug.cgi?id=643014
The onscreen keyboard should not follow the locale's text direction,
but order keys according to the selected keyboard layout. Effectively
this means enforcing LTR on the keyboard actor.
https://bugzilla.gnome.org/show_bug.cgi?id=672024
We are currently taking "old" placeholders that are still animating
out into account to calculate the new placeholder position - this
causes an annoying bug, where dragging a dash item downwards triggers
quick continous position changes of the placeholder.
Just ignoring old placeholders fixes the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=651842
Some modifiers like NumLock or ScrollLock don't make sense in
keybindings, which is why we ignore them in mutter when matching
events to keybindings; for keybindings in the overview, we do
the matching ourselves, so filter the same modifiers as mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=665215
The hide animation causes hover notifications for the actors inside the
boxpointer. PopupBaseMenuItems, in particular, grab the keyboard focus on
hover notifications to enable keyboard navigation on menus. This, in turn,
breaks modal dialogs' keyboard navigation since key focus is taken away from a
just created dialog when the menu is hiding.
Since input events aren't useful while menus are animating we just prevent
them from propagating.
https://bugzilla.gnome.org/show_bug.cgi?id=662493
Checking if _buttonLayout contains _initialKeyFocus always fails since we
destroy all children before. Instead, use a signal handler id when explicitly
setting the initial key focus which is zeroed if/when the actor is destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=663437
The dynamic-workspaces key was introduced to allow us to opt out of
writing the num-workspaces setting (which is ignored with the dynamic
workspace management anyway), but there'll be some expectations that
the setting will have an effect on the UI.
It's actually not very hard to support, so here's to the graybeards ...
https://bugzilla.gnome.org/show_bug.cgi?id=671568
With the recent keynav changes, the keyboard focus can now move
away from the search entry while a search is active. While we
keep the focus entry style while a search is active, we set the
cursor visibility depending on whether the entry has focus. This
doesn't seem very logical, so always request to show the cursor
when we appear focused.
Note that at least for now we are just expressing intent, as clutter
never draws the cursor for unfocused entries.
When canceling a search pressing Escape while the focus is on the
search entry we clear the entry, set its text to the hint and go back
to the previously selected tab. Make this the behavior also for when
the focus is on search results and not on the entry itself.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Running apps are always kept in the dash, so removing them from
favorites just moves them to the end of the favorites list. This
behavior is not immediately obvious, so only show the remove target
when dragging a favorites application that is not currently running.
https://bugzilla.gnome.org/show_bug.cgi?id=644853
Saving the status to GSettings is pointless if it did not actually
change. If done during login, it is actually harmful, as it causes
dconf-service to be started.
https://bugzilla.gnome.org/show_bug.cgi?id=668214
When restoring the previous sesssion presence, we forcefully set
gnome-session's status. In the case of IDLE, this will trigger the
screensaver, which is clearly unwanted first thing after login. We
should only save and restore statuses that are explicitly set by the
user anyway, so limit presence saving to AVAILABLE and BUSY statuses.
https://bugzilla.gnome.org/show_bug.cgi?id=665701
Previously, PanelMenuButton would only set max width if the user
explicitly clicked the menu button, resulting in submenus without scrollbars
if opened via keyboard navigation or mouse over.
https://bugzilla.gnome.org/show_bug.cgi?id=658946
loadExtension() fails if the extension object is already created,
but the installation dialog was creating a dummy object in the
downloading state. Since nothing requires that (and the object is
not in the correct format anyway), just kill it.
https://bugzilla.gnome.org/show_bug.cgi?id=671134
This hack was part of the custom scroll view code that allowed for
proper scrolling when the actor was near the screen edges. Since
the port to St.ScrollView, it's unnecessary and downright wrong,
causing portions of actors to be clipped. Remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
If a widget isn't focusable or none of its children are focusable, then
navigate_focus will return false and the key focus won't be set. We
need to explicitly grab the key focus in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
* Add a keyring prompter based on GcrSystemPrompter
* Adds dependency on gcr version 3.3.5 or higher
* Not yet using unmerged support for non-pageable memory
https://bugzilla.gnome.org/show_bug.cgi?id=652459
The preferred way to unmaximize/untile a window is by using a drag
gesture. Extend the available area to start this gesture into
non-reactive parts of the top bar above the window - with that we
take advantage of the "infinite height" of the screen edge, and the
extra space is particularly useful when the window has its titlebar
hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=666359
We were supposed to be updating the notification's title when the
window title changes, but we didn't actually bother to re-format
the title and body, effectively leaving the notification unchanged.
For modal dialogs without buttons, the button group still contributes
padding/spacing. To fix that, hide it by default and only show it
when actually adding buttons.
https://bugzilla.gnome.org/show_bug.cgi?id=668209
The appSwitcher has been using a custom scrolling implementation because
St.ScrollView was buggy when it was written. The bugs have been fixed
so remove the custom implementation and move to St.ScrollView.
https://bugzilla.gnome.org/show_bug.cgi?id=613194
The old formula worked only when the primary monitor was positioned at the
top of the virtual desktop. When that was not the case, the available
space was miscalculated sometimes resulting in negative numbers, which in
the end produced strangely vertically stretched window thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=651130
Although not all "Finding and reminding" applications are ready
yet, the integration with gnome-documents' search results overlaps
enough with the "Recent Items" provider to justify its removal.
https://bugzilla.gnome.org/show_bug.cgi?id=670150
Allow applications to register search providers by dropping a keyfile
into a well-known directory. For now, initialize all found providers;
long term, we probably want to give users the ability to restrict the
set of active search providers.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Add an asynchronous search provider for results from a DBus service
implementing the org.gnome.Shell.SearchProvider interface; this
will allow applications to hook into the Shell's search without
implementing it in Shell itself or requiring an extension.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
We will allow applications to hook into shell's search by registering
a service which implements a well-known DBus interface.
"search-providers" is a reasonable directory name for applications to
drop their registration files, but it conflicts with "search_providers"
used by open search providers - rename the latter to avoid confusion.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Currently, asynchronous search providers are expected to call
startAsync() in getInitialResultSet()/getSubsearchResultSet(),
which will trigger async mode until the search is canceled or
updated. Switching between synchronous and asynchronous mode like
this makes asynchronous search an implementation detail, but being
transparent to the searchDisplay means that certain optimizations
don't work as expected. Namely, updating asynchronous search results
causes flickering, and the automatic selection never focuses
asynchronous results.
So change the API to require providers being either synchronous (with
the current getInitialResultSet()/getSubsearchResultSet() methods)
or asynchronous (with asynchronous variants), and handle asynchronous
providers explicitly in searchDisplay.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
renderResults() updates the results set, determines the number of
results to display, retrieves the corresponding result metas and
adds a new results actor for each meta.
Splitting the function in those parts allows to move the retrieval
of the result metas into SearchResults, which is where we ensure
flicker-free rendering and control the selection - we want to keep
both features for asynchronous result metas which we are about to
introduce.
https://bugzilla.gnome.org/show_bug.cgi?id=663125
Empathy uses to support 2 D-Bus API for calls:
- StreamedMedia: legacy API
- Call.DRAFT: experimental version of the new API
Since 3.3.90, Empathy only supports Call1, the first stable version of the new
API, so the Shell should do the same.
https://bugzilla.gnome.org/show_bug.cgi?id=667694
Add a new dbus method that takes an area (x, y, width, height) and fires a
flashspot on it.
This would be useful for applications like totem and cheese.
https://bugzilla.gnome.org/show_bug.cgi?id=669660
An actor is removed from its parent after it emits the destroy signal,
so we can't just check if the notification stack has more than one
notification -- we need to check if there's a notification there
that is not the current one.
This was causing spew in the form of:
"this.notificationStack.get_children()[0]._delegate.setIconVisible
is not a function"
IconGrid items used to be square, so a single size value made
perfect sense. However, as contact search uses rectangular items,
using a single size is wrong - the allocated height ends up twice
the size of the visible height, which is particularly visible if
another provider displays results below contact results.
https://bugzilla.gnome.org/show_bug.cgi?id=670148
The correct way to make an actor having the same size as another is
a ClutterBindConstraint. Connecting to 'allocation-changed' fails because
the allocation might not change even when 'width' and 'height' properties do.
This is the case of Main.uiGroup, used as parent container for zoomed
window clones.
In lightbox.js we bind also the position because in principle it could change,
even if currently only fullscreen lightboxes are used.
VPN secrets are stored by the plugins, that provide separate
helpers for authentication. This commit adds the support for invoking
the binaries and pass them connection details.
For plugins that support it (as exposed by their keyfile), we invoke
them in "external-ui-mode" and expect a set of metadata about the
secrets which is used to build a shell styled dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=658484
ConsoleKit is being obsoleted by systemd. Accordingly port the CK logic
in the gnome-shell automount manager to systemd-logind APIs.
This makes use of systemd-logind's native C APIs which are much easier
to use than the D-Bus APIs in this case, and much faster too (since they
are synchronous and directly query the kernel for the information we
need). The dependency is compile time optional, and in order to be nice
to the Debian folks g-s compiled with this enabled fill automatically
fall back to CK support on systems lacking systemd.
Currently they return 'undefined' instead of something meaningful,
e.g. DND.DragMotionResult.CONTINUE. This was unnoticed because none
of the ancestors of the Activities button actors do any drag handling.
The only visible issue are JS errors generated when dragging, for example,
a window thumbnail over the button, because the cursor cannot be set.
https://bugzilla.gnome.org/show_bug.cgi?id=669921
Since the dummy actor occupies exactly the same area of the Hot Corner,
it can be erroneously picked during xdnd operations. Fix this by
hiding it from pick.
https://bugzilla.gnome.org/show_bug.cgi?id=669831
If both spacing and -shell-grid-item-size are 0, as they would be with nothing
setting them, we enter an infinite loop where we try to compute the layout.
Avoid the situation entirely by defaulting -shell-grid-item-size to a sane
value instead of 0.
https://bugzilla.gnome.org/show_bug.cgi?id=662747
The "extension" object is what I previously called the "helper" object.
It contains the extension importer object as well as the metadata object.
Things that were previously added on to the metadata (state, path, dir, etc.)
are now part of this new "extension" object.
With the new importer changes brought on by the extension prefs tool,
extensions are left without a way to import submodules at the global scope,
which would make them rely on techniques like:
var MySubModule;
function init(meta) {
MySubModule = meta.importer.mySubModule;
}
That is, there's now a lot more meaningless boilerplate that nobody wants
to write and nobody wants to reivew.
Let's solve this with a few clever hacks.
Allow extensions to get their current extension object with:
let extension = imports.misc.extensionUtils.getCurrentExtension();
As such, extensions can now get their own extension object before the
'init' method is called, so they can import submodules or do other things
at the module scope:
const MySubModule = extension.imports.mySubModule;
const dataPath = GLib.build_filenamev([extension.path, 'awesome-data.json']);
https://bugzilla.gnome.org/show_bug.cgi?id=668429
Add two new APIs, "launchExtensionPrefs" to let SweetTooth let the user
launch the extension preferences tool directly from the browser. To allow
SweetTooth to check if an extension can be configured, add a new key to
the 'metadata', 'hasPrefs', which is returned by the GetExtensionInfo/
ListExtensions DBus methods.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
ExtensionUtils is a new module that has a lot of miscellaneous things related
to loading extensions and the extension system put into a place that does not
depend on Shell or St.
Note that this will break extensions that have with multiple files by replacing
the old uuid-based importer with an object directly on the meta object.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
If an extension fails to import, we will pass the error object
to logExtensionError, which fails to pass it onto DBus as an
error object is not a string. To fix, convert the error object
to a string before passing it to logExtensionError.
https://bugzilla.gnome.org/show_bug.cgi?id=668429
When the session status changes to IDLE, we automatically adjust
the IM presence; however, we should treat HIDDEN the same as OFFLINE
and not change the presence.
https://bugzilla.gnome.org/show_bug.cgi?id=642408
Since the port to GDBus, sessionActive is only set on DBus name
owner changes; this means that it may end up not being initialized
at all, and therefore always evaluate to false.
Make sure that the property is always initialized on startup.
https://bugzilla.gnome.org/show_bug.cgi?id=668020
gnome-settings-daemon commit 07b1ed63016 removed the custom 'Changed'
DBus signal in favor of the standard 'PropertiesChanged' signal, so
use that instead to update the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=667371
When the last window on a workspace is closed the focus goes to some other
window in another workspace which would cause us to show the AppMenuButton for
an application that isn't visible on the current empty workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=643867
Currently it is not possible to trigger the context menu while the
summary notification is opened (and vice versa). To actually trigger
the desired item, the user has to click again, which is annoying
without a good justification, so allow switching directly between
left/right click items.
https://bugzilla.gnome.org/show_bug.cgi?id=666197
Currently we display IM status information for every contact, falling
back to "offline" if the contact does not have an associated IM
account. Instead, don't show IM presence in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=662685
this.parent was ported from calling the parent class's method like
MessageTray.Notification.prototype._init.call(this, ...);. When
porting to Lang.Class, the 'this' parameter is now passed automatically, but
removing it was forgot in a few places. Fix these places.
https://bugzilla.gnome.org/show_bug.cgi?id=665017
We consider spacing and padding in _adjustIconSize, but as we use
the theme node from an actor which is not exposed to the CSS, we
miss the "real" values - correct this.
https://bugzilla.gnome.org/show_bug.cgi?id=662213
Clear the ClutterClickAction state before starting the drag,
otherwise it will eat the first button event after the drag,
preventing a new drag from being started.
https://bugzilla.gnome.org/show_bug.cgi?id=662386
Writting the screenshot to a file can take a relativly long time
in which we block the compositor, so do that part in a separate
thread to avoid the hang.
https://bugzilla.gnome.org/show_bug.cgi?id=652952
DashItem labels have initial delay before showing up, but once the
first label in the dash is visible (meaning the user is very likely
exploring things) and the pointer is moved along the dash, the label
will follow immediately.
https://bugzilla.gnome.org/show_bug.cgi?id=666170
Signed-off-by: Seif Lotfy <seif.lotfy@collabora.co.uk>
- We should only call workspaceRemoved() for workspaces that are
are actually being removed.
- When we have multiple monitors, a window on a secondary monitor is
on all workspaces, so it ends up in all workspaces _allWindows
lists, so we can't use previous presence in that list to determine
whether we need to go ahead and add the actor; allWindows is simply
the list of windows where we are listening to notify::minimized.
https://bugzilla.gnome.org/show_bug.cgi?id=667652
Since the application proxy is created asynchronously, at the time
the GActionGroup (GActionMuxer) is created, there is no GDBusMenu yet.
Defer creating the menu in that case.
Also, clear out signal handlers if have no target application.
https://bugzilla.gnome.org/show_bug.cgi?id=633028
We add a drag monitor to check whether the pointer is inside
the workspace selector, and update the visibility of the drop
placeholder consequently.
https://bugzilla.gnome.org/show_bug.cgi?id=664201
According to the GIO docs, sections can have labels too. We support
them by inserting a non reactive menu item at the beginning of the
section. This item is specially flagged to be ignored while processing
changed signals from the model (since it does not correspond to any
model item)
https://bugzilla.gnome.org/show_bug.cgi?id=666681
If there's a single small window (e.g. empathy chat) in the overview, it
looks usable, because it's as big as outside of the overview, but when
you start to type, overview search is launched, which is confusing.
Fix that by setting maximum scale for window clones to 0.7
https://bugzilla.gnome.org/show_bug.cgi?id=646704
In overview when closing a window and afterwards dragging a window it can
happen that you pick a wrong window or no window if windows' positions is
updated while initiating the drag.
Fix that by delaying window rearrangement when cursor is over a window.
https://bugzilla.gnome.org/show_bug.cgi?id=645325
DND code assumes it can query the size of the actor before parenting,
while StWidget asserts that get_preferred_size() is only called
after the actor is on stage. This fixes a crash while dragging
"Connect to..."
https://bugzilla.gnome.org/show_bug.cgi?id=633028
With GJS' GDBus implementation, we get the invocation paramters as an
array if we declare a method as async.
This is bad and not consistent with what GJS does for synchronous
methods, but it's the way it is, and other classes in gnome-shell
implement this correctly by exploding the array into its components in
the method implementation, but not the screenshot methods.
Also, we're supposed to return a value using the provided invocation
object, not with a callback now, so do that.
https://bugzilla.gnome.org/show_bug.cgi?id=667662
Commit 25948f214e replaced the old hardcoded scaling behavior of
background-images with the CSS-compliant option to control that
behavior with the background-size property. Fix some fallout from
the changed default scaling behavior.
That way different system notifications, such as the ones about battery power
and the ones about software updates, are shown with separate message tray
sources.
https://bugzilla.gnome.org/show_bug.cgi?id=664138
After an item is destroyed, all its signals were disconnected,
except for 'destroy' itself. This could lead to exceptions, if
destroy was called more than once on the item.
https://bugzilla.gnome.org/show_bug.cgi?id=665680
Instead of using an St.Tooltip to show the app's name under the icon,
manually position a new St.Label ourselves. Make sure to keep the label
hidden when right-clicking so it doesn't get in the way of the popup menu.
Only one tooltip/label will be displayed at a time.
https://bugzilla.gnome.org/show_bug.cgi?id=666166
GTK+ also exports window-specific actions, by putting the object path
for the exported action group in the _DBUS_OBJECT_PATH X property.
We add this action group to the app's muxer with a 'win' prefix,
since that is what the exported menu expects. Whenever the focus
window changes, we update the window-specific actions of its
application, and emit notify::action-group to cause the app
menu to be updated.
GDBusActionGroup api has changed again, adapt to that.
Also, use a GActionMuxer to add the 'app.' prefix to actions,
instead of manually stripping it out of the action names.
In the future, the muxer will also contain per-window actions
with a 'win.' prefix.
By the time the window is first mapped and the app menu button is
synced, we may not have finished reading the menu. In that case,
connect to notify::menu and update accordingly.
Use the new GApplication support in ShellApp to create the application
menu. Supports plain (no state), boolean and double actions.
Includes a test application (as no other application uses GApplication
for actions)
https://bugzilla.gnome.org/show_bug.cgi?id=621203
When transitioning from gnome-panel to gnome-shell in 3.0 we
lost the ability to summon the wisdom of the mythical fish.
This patch restores this, for the few adepts that are aware of
the magical incantation.
(Not as configurable as the original one, but it's an easter egg
after all...)
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Forcing the icon size will distort it unnecessarily, and will
in any case not work if showing an animation (which is a ClutterGroup).
Instead, set the size on the bin, and make it align its child
if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=666606
Previously the code in _accessPointAdded was iterating over the
the network list to find a good place, and at that time, added both
the network to the list and the item to the menu. When I refactored
to call queueCreateSection, I forgot to add code to insert the
network in the list.
Add it now, using the new Util.insertSorted function.
https://bugzilla.gnome.org/show_bug.cgi?id=666429
By using Main.queueDeferredWork, we can ensure that most of the
menu contents (in particular, the heaviest parts like the list of
wifi networks) are not updated immediately as we receive signals
from NetworkManager. Instead, the menu is rebuilt some time later,
or as soon as the user opens the menu.
This means that it is no longer needed to optimize for the
access-point-added case, replacing a lot of buggy code with a safer
call to _queueCreateSection, which in turn should ensure that the
more menu, if existing, is always at the end and that at most 5 networks
are visible outside it.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
We need to notify when the channel dispatcher calls HandleChannels on
us with a channel we already handle. However, we don't want to notify
if we claim a new incoming channel which doesn't actually have
anything interesting in it yet.
For example, a new channel pops up just to give a delivery
notification. We want (or, need) to handle it but don't want to notify
for it.
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=666243
Signed-off-by: Jonny Lamb <jonnylamb@gnome.org>
The window overlays may be shown erroneously if hideOverlays is
called while the corresponding clone has an uncompleted tween which
calls showOverlays in its onComplete handler, for instance when
quickly leaving the overview before the initial overview animation
has finished. To fix, remove all existing tweens when hiding the
overlays.
https://bugzilla.gnome.org/show_bug.cgi?id=666020
When in overview, window labels flicker or are temporarily hidden on a
number of occasions - when simply clicking around the area the windows
are displayed in, dragging a window, sliding in the workspace list,
adding new workspaces etc. This patch makes the label for any window
visible at any given moment when in overview and the said window is
not being dragged around.
https://bugzilla.gnome.org/show_bug.cgi?id=644861
When wifi or wwan are blocked by hardware killswitch, we should not
allow changing the switch (it won't work anyway), and show
"hardware disabled" instead, similar to what we already do in the
bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=665194
When placing networks in _createSection, we were taking in
consideration that _activeNetwork is always first, by adding 1,
but then kept this offset also for networks following it (normally,
all of them, since _activeNetwork is also the most recently used),
that instead should not be affected by the movement.
This resulted in the menu showing 4 networks + More... instead of
5.
https://bugzilla.gnome.org/show_bug.cgi?id=664124
The three boxes for the ripple animation are visible when created. This
means that the drag and drop code that searches for an actor to handle
the drag can find the ripple boxes instead of the Activities button or
hot corner. The latter can handle drag and drop while the ripple boxes
can't.
This is only a problem if drag and drop is attempted before the ripple
animation has been played: the boxes are made invisible at the end of
the animation. The fix is to just create the boxes invisible.
Instead of leaving the tray covering the whole last pixel row when it's
hidden, hide it completely. This avoids mouse events not being delivered to
application windows on the last pixel row.
To summon the tray we use a single reactive pixel on the corner.
https://bugzilla.gnome.org/show_bug.cgi?id=663366
The dash handles 'window-drag-cancelled', to be able to do the
animations for drag snap-back and size changes in parallel. As
the signal is not emitted for previews in the workspace switcher,
it does not work in that case.
If workspaces-only-on-primary is false, swipe scrolling is now
broken with multiple monitors. To fix, let workspacesDisplay
handle swipe scrolling for all views.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
If workspaces-only-on-primary is false, workspaces should be shown
on each monitor; rather than letting the existing workspaces span
the entire screen, manage one workspacesView per monitor (similar
to the extra workspaces in WorkspacesView when the setting is true).
https://bugzilla.gnome.org/show_bug.cgi?id=652580
Extra workspaces are special, in that they collect windows from
all workspaces for a particular monitor. This matches the default
behavior, but we need more than a single workspace per monitor if
workspaces-only-on-primary is false, so don't create the extra
workspaces in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
WorkspacesDisplay was introduced to manage the workspace objects
and views; however, the overview still accesses the view held
by the workspacesDisplay directly, which is a bit odd.
Add some additional methods needed by the overview, and make the
view a private property.
https://bugzilla.gnome.org/show_bug.cgi?id=652580
