this just adds backend support for retrieving the tile
information from X11 (randr 1.5) and native backends.
It stores the tiling information into the output struct.
When DnD is started from an X11 client, mutter now sets up an special
grab that 1) Ensures the drag source keeps receiving events, and 2)
Moves an internal X Window over wayland clients as soon as the pointer
enters over these.
That window will act as the X-side peer for the currently focused
wayland client, and will transform XdndEnter/Position/Leave/Drop
messages into wayland actions. If DnD happens between X11 clients,
the window will be moved away and unmapped, to let these operate as
usual.
https://bugzilla.gnome.org/show_bug.cgi?id=738312
X11 client windows now hook a X11-specific MetaWaylandDragDestFuncs
that converts these into Xdnd* messages, and an additional selection
bridge has been added to take care of XdndSelection, and the data
transfers done through it.
https://bugzilla.gnome.org/show_bug.cgi?id=738312
This will be useful in order to interact with drag dest surfaces in
its windowing-specific ways, although everything defaults to the
wayland vfuncs.
https://bugzilla.gnome.org/show_bug.cgi?id=738312
window->is_alive isn't initialized explicitly so it defaults to FALSE
meaning that if the first ping fails we'd short circuit and not show
the delete dialog as we should.
We could initialize the variable to TRUE but in fact we don't even
need the variable at all since our dialog management is enough to
manage all the state we need, i.e. we're only interested in knowing
whether we're already displaying a delete dialog.
This does change our behavior here since previously we wouldn't
display the dialog again if the next ping failed after the dialog is
dismissed but this was arguably a bug too since in that case there
wouldn't be a way to kill the window after waiting for a while and the
window kept being unresponsive.
https://bugzilla.gnome.org/show_bug.cgi?id=749711
This makes gnome-settings-daemon turn on the backlight and
gnome-shell's screen shield animate.
Note that on X sessions, gnome-settings-daemon uses the same upower
property to force an innocuous key event into the X server so that the
idle time gets reset since Xorg doesn't do this itself on lid events.
https://bugzilla.gnome.org/show_bug.cgi?id=749076
This piece of code hooks in both wl_data_device and the relevant X
selection events, an X11 Window is set up so it can act as the clipboard
owner when any wayland client owns the selection, reacting to
SelectionRequest events, and returning the data from the wayland client
FD to any X11 requestor through X properties.
In the opposite direction, SelectionNotify messages are received,
which results in the property contents being converted then written
into the wayland requestor's FD.
This code also takes care of the handling incremental transfers through
the INCR property type, reading/writing data chunk by chunk.
https://bugzilla.gnome.org/show_bug.cgi?id=738312
Expose it partly (in internal headers anyway), and pass a vtable for the
data source functions, the wayland vfuncs just delegate operations on the
wl_data_source resource. The resource has been also made optional, although
it'll be present on all data sources from wayland clients.
The ownership/lifetime of the DnD data source has also changed a bit,
belonging now to the MetaWaylandDataDevice like the selection one does, as
we can't guarantee how long it will be needed after the grab is finished,
it will be left inert and replaced the next time DnD is started at worst.
This allows the creation of custom/proxy data sources, which will turn out
useful for X11 selection interoperation.
https://bugzilla.gnome.org/show_bug.cgi?id=738312
We'll need to get the value of some properties. Fail if the number of
items returned is less than we expect and warn if it exceeds it so
that we can easily find out if items are added to a property later and
fix it.
The corresponding wl_notify field for destroy_data_device_icon()
is drag_grab->drag_icon_listener, otherwise we're fetching a pointer
that's slightly off where we want.
When running as an X11 compositor we do this for every event we see on
the X event stream. As a wayland compositor we don't go through that
code path but since we see all events we can easily do this on motion
events.
In fact, we don't even need this caching when we're a wayland
compositor since we can always find where the pointer is without a
round trip but we're sharing the current monitor logic with the X
path so let's keep it as is for now.
https://bugzilla.gnome.org/show_bug.cgi?id=748478
Some DRM drivers have added a consistent set of properties that
allow compensating for the overscan that some TVs do, without the
user being able to disable.
The stop function currently manually constructs the lock
filename from the display number and also calls unlink
on the same, already known lock filename from the manager
struct.
This commit gets rid fo the manual construction in favor
of the saved lock filename.
https://bugzilla.gnome.org/show_bug.cgi?id=748380
The start function has a few exit paths that need to
perform clean up of the lock file.
This commit consolidates those exit paths at the end
using an out label and gotos.
https://bugzilla.gnome.org/show_bug.cgi?id=748380
Add set_modal ond unset_modal to the gtk_surface interface. When a
surface is modal, the compositor can treat it differently from non-modal
dialogs, for example attach it to the parent window if any. There is
currently no changes to input device focus; it is up to the client to
ignore events to the parent surface that is wanted.
This bumps the gtk_shell version to 2.
https://bugzilla.gnome.org/show_bug.cgi?id=745720
There is copy&pasted code in set_scroll_button, which is apparently
wrong, because it is trying to set scroll method instead of the scroll
button...
https://bugzilla.gnome.org/show_bug.cgi?id=747967
Since 8769b3d55, the checks performed on which update_* function was
called for each device got quite more lax, leading to failed asserts
on code that assumed the previous behavior.
Change update_[mouse|touchpad|trackball]_* to bail out early if the
device received has not the right type, and remove the asserts.
https://bugzilla.gnome.org/show_bug.cgi?id=747886
The existing private get_monitor_neighbor() function returns a
MetaMonitorInfo, which is private as well. Add a public wrapper
that returns a monitor index instead, as we do for other public
monitor-related methods.
https://bugzilla.gnome.org/show_bug.cgi?id=633994
When a parent of a subsurface gets it state applied (either by a
wl_surface.commit, wl_subsurface.set_desync or a recursive
wl_surface.commit on a parent surface), the pending position state
of the subsurface should be applied. If the subsurface is in effective
synchronized mode (i.e. if its in explicit synchronized mode or any of
its parent surfaces is a subsurface in explicit synchronized mode), the
cached state should also be applied at this point, including its
subsurface children, recursively.
https://bugzilla.gnome.org/show_bug.cgi?id=743617
Otherwise we'll access freed memory in the handlers.
The wayland keyboard is released when the seat loses the keyboard
capability which happens when leaving the VT so if there are keymap
changes while switched away from the VT we would crash.
https://bugzilla.gnome.org/show_bug.cgi?id=747263
Since the frame is the window that's redirected, there's no reason for
it to match the root window. There *is*, however, a big incentive to
match the window's visual, since not doing so might trigger automatic
redirection.
On a specific platform, we construct a depth-32 root window, and stick a
depth-24 child window inside it. The frame ends up being created
depth-32, not depth-24, so we get automatic redirection.
since commit 8c16ac47c1, we started
creating the login screen on display 1024 instead of display 0.
This defeats this logic in try_display:
display++;
/* If display is above 50, then something's wrong. Just
* abort in this case. */
if (display > 50)
In practice it doesn't matter much since we only have one login
screen in most setups, but we should still fix the bug.
This commit introduces a separate counter to keep try of 50 tries,
rather than assuming "display number == number of tries".
https://bugzilla.gnome.org/show_bug.cgi?id=746545
To avoid integer overflow when scaling "infinite" regions (0, 0)
(INT32_MAX, INT32_MAX), intersect with the surface rect before scaling,
instead of intersecting with the buffer rect afterwards.
https://bugzilla.gnome.org/show_bug.cgi?id=746510
This seems nicer/tidier than the current X11 (center on the span of all
monitors) or native (so close to the activities corner it's hard not
to trigger it) platform behaviors.
This code also takes over the native-specific pointer warping that
happens when the pointer was over a removed output.
https://bugzilla.gnome.org/show_bug.cgi?id=746896
This function returns the monitor_info index corresponding to the given
coordinates, or -1 if none is found at that point. The native backend
has been changed in places where it could make use of this function.
https://bugzilla.gnome.org/show_bug.cgi?id=746896
clutter currently never emits activated or deactivated signals on
the stage object when using the EGL backend. Since the stage never
gets activated, accessibility tools, like orca, don't work.
This commit makes mutter take on the responsibility, by tracking
when the stage gains/loses focus, and then synthesizing stage
CLUTTER_STAGE_STATE_ACTIVATED state events.
A limitation of this approach is that clutter's own notion of
the stage activeness won't reflect mutter's notion of the
stage activeness. This isn't a problem, in practice, and can
be addressed in the medium-term after making changes to
clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=746670
The original code in Weston that this was ported from returned an errno,
not a boolean, so we were inadvertently returning TRUE here during an
error path. Fix that up.
The enums are swapped currently, because for edge scroll is enabled two finger
scroll and similary for two finger scroll is enabled edge scroll, what is
apparently wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=746870
When a client wants to start initialized it my set the maximized state
before having attached any buffers. Before we'd not notify the client of
the new expected size if the previous size was 0x0 as it would normally
mean we'd resize to 1x1, but since this is not always the case, only
avoid notifying the client if the previous size was 0x0 and the result
is 1x1.
https://bugzilla.gnome.org/show_bug.cgi?id=745303
As we opt out of GTK+/Clutter's HiDPI handling, we need to apply the
window scaling factor manually to decorations, both the geometry and
when drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=744354
If the wl_surface resource happens to be destroyed before any other
role resource, the destructor for the latter will attempt to
access/modify random memory.
Fix this by ensuring the associated resources are destroyed on the
wl_surface destructor, this will free all associated memory and
remove the resources ahead of their imminent destruction.
https://bugzilla.gnome.org/show_bug.cgi?id=745734
In 3.16, GDM keeps a login screen running on vt1.
This login screen starts an Xwayland instance.
Since it's the first X server to start, it gets
the prized :0 display number.
This commit works around that problem, for now,
by having GDM's display number start at 1024.
https://bugzilla.gnome.org/show_bug.cgi?id=746295
With all input events being handled through clutter, this only confuses
things, and most nominally, coerces touch events through places we didn't
intend to, like the window frame.
This makes again all touch events only handled in the passive grab on X11,
while the rest stays pointer (emulated) only.
https://bugzilla.gnome.org/show_bug.cgi?id=745335
On startup, the cursor is kept hidden if there's any touchscreen available.
If the device that was last interacted is removed, we check on available
pointing devices though, so we don't possibly hide the pointer if there are
further mice/touchpads/etc.
Devices being added don't update cursor visibility, we wait for the user
interacting with those instead.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
On X11, calling this function on meta_display_handle_events() will not catch
mouse events happening over clients, so poke directly in the backend for
XI_DeviceChanged events, which mutter will get on device switches.
The code has been slightly refactored so we deal with XIEvents at a single
handle_input_event() function.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
This function can be used to trigger changes depending on the device type
that is currently emitting the events. So far, it is used to switch cursor
visibility on/off on touchscreen interaction.
A "last-device-updated" signal has also been added, in order allow hooking
other behavior changes (eg. OSK) when the last device changes.
https://bugzilla.gnome.org/show_bug.cgi?id=712775
Since commit 6e06648f7, we start out with the invisible frame parts
only, and then add the unconstrained rect's height (which consists of
the visible parts of both frame and client window) *unless* the window
is shaded. While we indeed don't want to add the client height in that
case, we need to explicitly include the visible frame parts now.
https://bugzilla.gnome.org/show_bug.cgi?id=746145
There is no good reason to do so, besides a nice way to check whether
a particular button is enabled. However there are legitimate reasons
for overdrawing like box-shadows or outlines, so remove the clip.
The initial pointer position is set by clutter. At the moment it
is the point 16x16 on the screen. But this point is not always
in the visible area on monitors (the monotors can be arranged in
many different ways).
https://bugzilla.gnome.org/show_bug.cgi?id=745752
Otherwise the pointer might be "lost" outside the visible area. Note
that the constraining code only ensures the pointer doesn't leave the
visible area but if the pointer is already outside because the rug was
pulled under it then it doesn't do anything.
https://bugzilla.gnome.org/show_bug.cgi?id=745121
The timer to blacklist the window from frame sync is set at the time of
issuing the sync request, but not removed until the client replies to
the most recent wait serial.
This means that if the client is slowly catching up, the timeout would
fire up regardless of the client slowly updating the alarm to older
values.
Fix this by ensuring the timeout is reset everytime the sync request
counter is updated, to acknowledge the client is not irresponsive,
just slow.
https://bugzilla.gnome.org/show_bug.cgi?id=740424
MetaWaylandFrameCallback has been added a surface field, which is then
checked when destroying the surfaces. This prevents unintended callbacks
to run after a surface has been destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=745163
Implicit conversion from int to float is not supported by
GLSL ES.
Fixes:
(gnome-shell:8954): Cogl-WARNING **: Shader compilation failed:
1:2: P0004: High precision not supported, instead compiling high precision as medium precision
4:17: S0001: Type mismatch in arithmetic operation between 'int' and 'float'
when one trigger the overview mode on Mali 400 r1p1 GPU.
https://bugzilla.gnome.org/show_bug.cgi?id=745442
In order to switch to the correct surface actor scale given the monitor
the surface is on, without relying on the client committing a new state
given some other side effect, sync the surface actor state when the main
monitor associated with the corresponding window changed.
https://bugzilla.gnome.org/show_bug.cgi?id=744933
Since the surface actor knows more about how it draws itself, instead of
pushing texture state (buffer and scale), input region and opaque region
from MetaWaylandSurface after having transformed into what the surface
actor expects, make the surface actor set its own state given what state
the Wayland surface is in.
https://bugzilla.gnome.org/show_bug.cgi?id=744933
DRM objects like connectors and encoders might change at any time, in
particular they might become invalid between drmModeGetResources() and
getting the actual objects in which case they'll be NULL. Be defensive
against that.
Note that, if this happens, we should get another udev event soon
which will cause us to update our state.
https://bugzilla.gnome.org/show_bug.cgi?id=745476
To make the nested compositor mode work again after "backends/native:
Calculate the output scale in here", set the scale when creating the
dummy output.
https://bugzilla.gnome.org/show_bug.cgi?id=745401
Doing this on manage() allows the common MetaWindow initialization to
do the right thing for popups like setting skip_taskbar and
skip_pager.
In particular this avoids gnome-shell's app tracker to create a new
ShellApp instance for every popup.
https://bugzilla.gnome.org/show_bug.cgi?id=745118
Before commit ac448bd42b the pointer,
keyboard, and touch objects were initialized when the seat was created.
Now they're initialized later, when the clutter device manager finds and
loads them.
This commit makes sure we don't try to access those objects if they
aren't initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=744640
The wayland seat event handlers get sent events that
aren't strictly interesting to them (such as events for
hardware devices the seat doesn't support and events for
virtual devices that the seat needs to ignore).
This commit makes sure all uninteresting events get ignored.
Kerbel Space Program, and perhaps some other SDL-based programs, use
a really dumb way of specifying icons, which is totally
non-standards-compliant.
The ICCCM specifies that the icon_pixmap field of WM_HINTS should be a
1-bit-deep Pixmap, but we've seen applications set it to a pixmap of the
root depth as well, so we support that.
Kerbel Space Program seems to use it with a 32-bit depth Pixmap,
signifying ARGB32 (which it is), along with a 1-bit icon_mask, which
crashes us.
Keep in mind that Pixmaps, by definition, have no Visual attached, so
we simply have to make a guess at the correct visual based on the
depth. Do that by assuming that a depth-32 visual always means ARGB32,
which is a pretty safe bet.
If a client creates an xdg_popup given a parent that is a xdg_popup that
is not the most top one in the grab chain, send the
not_the_topmost_popup error.
Also fail a client who destroys a popup that is not the top most one.
https://bugzilla.gnome.org/show_bug.cgi?id=744452
We'll want to expose popup logic outside of meta-wayland-pointer.c and
one day we'll also probably want to add touch support for popups, so
lets move it to its own file. There are no significant semantical
changes, only refactoring.
https://bugzilla.gnome.org/show_bug.cgi?id=744452
The current ordering updates the clip shape of the composite overlay
window after unredirecting the target window. This has the effect of
forcing X to clear the target window and sending an expose to the
application to repaint - causing an unsightly flash. If we update the
shape first, then unredirect, X restores the background of the root
window (sending no expose events as no one is interested) and the
background is typically NONE for the root window. Then the unredirect
paints the contents of the composite backing pixmap over top without
requiring a round trip and waiting for the client to repaint - thus no
flashing.
Fixes regression from
commit d6282716b2
Author: Jasper St. Pierre <jstpierre@mecheye.net>
Date: Fri Dec 6 17:10:44 2013 -0500
compositor: Simplify the unredirected window management code
Cc: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
https://bugzilla.gnome.org/show_bug.cgi?id=743858
This just exposes the type and the singleton getter necessary to make
it available to introspection. We'll expose more functionality as it
becomes needed.
https://bugzilla.gnome.org/show_bug.cgi?id=743745
We're locked to frame sync anyway, so it doesn't make sense to try to
redraw early. In casual testing, this seems to actually make things
faster, as well.
The commit 97a69cee5a broke the caching of
the surface state when because the frame_callback_list target state was
overwritten after the content had been moved to it.
This commit fixes it by moving the frame list addition after the copy. We
also need to initialize the list since the plain copy put garbage in it.
https://bugzilla.gnome.org/show_bug.cgi?id=743678
When looking for space to place a new window, other non-minimized
windows on the same workspace should be taken into account. However
the current check does not work correctly when the placed window is
located on all workspaces, so handle that case explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=743217
When running as a dispay server pointer barriers are a server side
feature and requires no client interaction of any sort. This patch
implements pointer barriers that can be used when running as a display
server on the native backend. Running as a display server using the X11
backend is currently not supported.
https://bugzilla.gnome.org/show_bug.cgi?id=706655
For each device that can be mapped (touchscreens, tablets), the output
will be fetched from settings and matched with the currently connected
ones. If a match is found, the device matrix will be found out from the
output configuration and set on the device.
This is also updated both individually for newly connected devices, and
collectively on output configuration changes.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This goes through modifying XI2 device properties, either common ones (eg.
set on every device) or those specific to the libinput X11 driver. Keyboard
repeat/rate are set through core and XKB APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This object internally keeps track of the relevant input configuration,
and goes through its vmethods in order to apply the configuration on the
backend-specific devices.
So far, only mouse/touchpad settings are actually attached to GSettings
changes. ::set_matrix(), meant for tablets/touchscreens, is not hooked
yet.
One caveat is that meta_input_settings_create() may return NULL if the
backend does not own the windowing system (wayland nested on X11 being
the one case), and thus device settings can't be changed freely.
https://bugzilla.gnome.org/show_bug.cgi?id=739397
This patch removes the X11 specific code from MetaBarrier and creates an
abstraction layer MetaBarrierImpl. The existing X11 implementation is
moved to a new GObject MetaBarrierImplX11 implementing the abstract
interface MetaBarrierImpl which is instantiated by MetaBarrier when
supported.
While at it, move it to backends/ and properly name the files.
https://bugzilla.gnome.org/show_bug.cgi?id=706655
EDID parsing has been refactored to a common meta_output_parse_edid()
function, which ensures the extracted information is the same on both KMS
and X11 backend, so it can be used consistently on eg. settings values.
https://bugzilla.gnome.org/show_bug.cgi?id=742882
MetaKeyCombo is about the *unresolved* keybinding, which can either be a
"keysym" (<Ctrl>F) or a "keycode" (<Ctrl>0x21). When we resolved the
keysym to a keycode, we stuffed it back in the same MetaKeyCombo, which
confused about what the "keycode" field was for. Thus, we often stomped
on the user's explicit choice if they chose a keycode binding value.
To solve this, create a separate structure, the "devirtualized key combo"
or MetaKeyDevirtCombo, which contains a resolved keycode from the
keysym, and a devirtualized modifier mask. The MetaKeyCombo is now
always a "source" value, and the MetaKeyDevirtCombo is now always what
the user chose.
This also lets us significantly clean up the overlay and ISO key binding
paths.
The reason MetaKeyCombo has a keycode value at all is *not* to store the
devirtualized keycode from the keysym, but instead to allow people that
type in "0x55" into the preference. Everything except the overlay-key
respected this. Make the overlay-key binding respect this.
Break down the beautiful core/ui abstraction barrier by inserting
a pointer to MetaWindow into a MetaUIFrame. I'm a scoundrel, I know.
We'll use this very soon to destroy meta_core_get.
Whenever we added a frame to the GHashTable, we added the frame itself
as the value, and a pointer to its storage of the frame window XID,
as the key.
When we iterated over the hash table, we actually looked up the
MetaUIFrame in the key, which might seem extraordinarily wrong, but
eagle-eyed viewers might notice that the XID is the first field in
MetaUIFrame, so the key and value are actually the same pointer.
Changing the layout of MetaUIFrame at all causes this to go haywire,
so let's not do this and simply put the MetaUIFrame in the value,
as expected.
When the frame type updates, we were doing something funky that
caused us to reset the title used for the text layout here. I can't
really think of any place that it would trigger, and in testing I
haven't hit this either, so let's just remove the fancy logic and
assert this.
With support for the old metacity theme format gone, there's no
reason to keep storing theme information in terms of the old theme
properties. Just store the padding/border information for each
element directly.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
MetaFrameStyle now only holds a MetaFrameLayout, so we can cut out
the middle man and use the layout directly. And as we are already
using a single style/layout per frame set and handle frame state
and focus by setting appropriate style flags, MetaFrameStyleSet
is pointless too - just store one MetaFrameLayout per frame type
directly in the theme.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
Rest in peace you magnificent format, love-child of arcane X11 drawing
API and markup craze, you will not be missed.
We do remember however the bravery of a many men and women, who fearlessly
descended into the guts of your intrinsics and turned ugliness into beauty;
their work will still be spoken of when you will long have been forgotten.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
All geometry/drawing information is now picked up from the GTK+ theme,
so replace the remaining bits (hide_buttons + title_scale) with
hardcoded values from the default Adwaita theme and stop loading
the metacity theme altogether.
If there is a need to theme those constants again in the future,
we should make them available from GTK+ where they are available
for client-side decorations as well. They certainly don't justify
maintaining support for a complex theme format.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
Few themes ever had support for those in the first place, and even
less supported them properly; in particular support in the default
theme has been broken for a while now.
With this in mind (and considering that not even the tweak tool exposes
any UI to configure them), let's (try to) remove support altogether - the
corresponding rects are still kept around, so it's easy to add back in
case we reconsider (and get the necessary artwork).
https://bugzilla.gnome.org/show_bug.cgi?id=741917
GTK+ doesn't deal with different frame types for its client-side
decorations - it just treats dialogs the same as normal windows
and ignores the odder frame types like UTILITY and MENU. That's
fine as those have largely gone out of fashion anyway, but it's a
different case for the WM - we still have to support them somehow.
For now, just apply the existing title_scale factor to the geometry
information picked up from the theme in addition to the title font.
If it turns out that there's demand for something more sophisticated,
we can still consider adding wm-only style information to the GTK+
theme.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
The frame shape is relevant in three places:
- the window decoration we draw
- the frame mask (used for the shape region)
- the frame bounds (used for clipping)
All three should match, so make sure to use the same GTK+ method for
the first two, and bring the (non-antialiased) third closer to the
other two by removing an obscure modifier from the corner radius.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
We now have everything in place to pick up geometry and drawing
information from GTK+ rather than the metacity theme, so do just
that; the metacity theme is now only used for some constants
(title_scale, hide_buttons, ...), which we will replace soon.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
We want to eventually pick up all theme information from GTK+ instead
of our own theme format; to prepare for this, add another helper method
to fill in geometry information from the GTK+ theme.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
GTK+ expresses the window state as style classes and widget state for
client-side decorations. Add a helper method to translate our own frame
state to the corresponding changes to the style context hierarchy.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
Sounds obvious, doesn't it?
After this change when titlebar-uses-system-font is set, the "system
font" used will not be a generic one, but match what GTK+ uses in
client-side decorations.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
In order to pick up all theme information from GTK+, a single style
context is not enough; a style hierarchy that closely matches the widget
hierarchy by GTK+'s client-side decorations will allow this soon.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
Our current use of style contexts is fairly limited - we don't
use them for much more than picking up some color information.
We will soon start to make more elaborate use of GTK style
information, but a single context will no longer be enough
to draw a frame then.
To prepare for this, add a simple ref-counted type to wrap
style information.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
Rather than defining the space to the left and right of buttons, add a
simple spacing property that defines the space between buttons, which is
what GTK+ does for client-side decorations (e.g. GtkButtons in a GtkBox).
Unfortunately the value is hardcoded in GTK+; if it is exposed in the
theme in the future, we should pick it up from there, but for now we
just use the same value as GTK+.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
Basically it's odd to have "button_rect" be a function with all the
foo_rect GdkRectangles around - renaming to get_button_rect() will
free the name for the generically named "rect" once buttons are the
only movable pieces in the frame.
https://bugzilla.gnome.org/show_bug.cgi?id=741917
This reverts commit 47e339b46e. The
approach that was used to reduce the amount of work we do on RR events
to the necessary minimum is flawed. It assumes that, when the first
event we see where the retrieved XRRScreenResources.timestamp is
bigger than the previous, we already have all the data we need to
rebuild our view of the world.
That isn't true however, because the X server sends
RRScreenChangeNotify events for every step of the configuration
change, i.e. it lacks an atomic reconfiguration API. In particular, if
the X screen size is one of the changes, when we rebuild our state and
emit monitors-changed, the X screen size might still be the previous
one and since we stop updating ourselves until another reconfiguration
happens (noticed by looking at XRRScreenResources.timestamp) we end up
with the wrong idea of the X screen size.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
This optimization breaks our use of XRRScreenResources' timestamps to
detect hotplugs in case one of the outputs is disconnected and the
remaining ones don't need any mode, position or transform adjustments.
In that scenario, when applying the new configuration, we resize the X
screen but never call XRRSetCrtcConfig() and since XRRSetScreenSize()
doesn't take a timestamp and the X server doesn't update its last set
timestamp, when we next get a RRScreenChangeNotify and update
ourselves, XRRScreenResources.timestamp will still be smaller than
XRRScreenResources.configTimestamp which makes us think we're seeing a
new hotplug. We just don't enter an endless loop because the screen
size that we keep applying is always the same and the X server
short-circuits and stops sending us RRScreenChangeNotifys.
Always calling XRRSetCrtcConfig() ensures that the last set timestamp
will be bigger than configTimestamp in the next event and thus making
us trigger the monitors-changed signal properly.
Note that the X server already does basically the same checks that
we're removing here, so doing this shouldn't be a significant
efficiency loss. See
http://cgit.freedesktop.org/xorg/xserver/tree/randr/rrcrtc.c?h=server-1.16-branch#n539
If the app finished multiple frames before we sent _NET_WM_FRAME_DRAWN,
we could add the send_frame_messages_timer multiple times. In the rare
case that the app immediately closed the window, the older timeout
could potentially then run on the freed actor.
https://bugzilla.gnome.org/show_bug.cgi?id=738686
* Use -1 rather than 0 as a flag for pending queue entries; 0 is
a valid frame_counter value from Cogl.
* Consistently handle the fact we can have more than one pending
entry. It's app misbehavior to submit a new frame before
_NET_WM_FRAME_DRAWN is received; but we accept such frame messages,
so we can't just leak them.
* If we remove send_frame_message_timer, assign the current frame counter
to pending entries.
* To try to avoid regressing on this, when sending _NET_WM_FRAME_TIMINGS
messages, if we have stale messages, or messages with no frame drawn
time, warn and remove them from the queue rather than just accumulating.
* Improve commenting.
https://bugzilla.gnome.org/show_bug.cgi?id=738686
It doesn't make sense to load cursor textures that we might not ever
use. Since the code here also uses CoglTexture2D, and cursors tend
to be NPOT textures, then we won't crash users of cards without
NPOT support. At least until they open the magnifier. :)
Whenever the compositor takes a grab, we're supposed send leave/enter
events to the current surface, which makes sense, as the compositor
has stolen the pointer from the client.
I forget why I added the special case in the first place, but it's
likely a bug that's since been fixed.
This actually fixes a bug: it prevents the need to double-click on
X11 application titlebars when grabbing them.
Windows that set empty input shapes get n_rects of 0 when querying them
later, which makes sense, but the code that interpreted the result
translated it into a NULL input shape, which meant it was the same as
the bounding region. As such, an empty input shape would actually get
interpreted as a full input shape!
We, ourselves, set an empty input shape on tray icon windows in
gnome-shell since we would handle the picking ourselves. This meant that
we'd actually get the MetaSurfaceActorX11 when hovering over the tray
icon, instead of the ShellGTKEmbed that we capture events on and react
to.
This fixes weird tray icon behavior in gnome-shell.
The parent pick() implementation in ClutterActor only recurses if the
vfunc is untouched, which means it's up to the MetaWaylandSurface
implementation to actually recurse, just the same as if an input mask
applied.
https://bugzilla.gnome.org/show_bug.cgi?id=738890
This reverts commit ec8ed1dbb0.
1) It turns out to add a momentary flicker from the transition
between the login screen and user session
2) It actually isn't needed anymore since bug 733026
https://bugzilla.gnome.org/show_bug.cgi?id=740377
Refactor make_default_config() to always sanity-check the configuration to
ensure that it fits within the framebuffer. Previously, this was only done
for the default linear configuration.
In recent versions of the QXL driver, it may set "suggested X|Y" connector
properties. These properties are used to indicate the position at which
multiple displays should be aligned. If all outputs have a suggested position,
the displays are arranged according to these positions, otherwise we fall back
to the default configuration.
At the moment, we trust that the driver has chosen sane values for the
suggested position.
When the output device has hotplug_mode_update (e.g. the qxl driver used in
vms), the displays can be dynamically resized, so the current display
configuration does not often match a stored configuration. When a new
monitor is added, make_default_config() tries to create a new display
configuration by choosing a stored configuration with N-1 monitors, and then
adding a new monitor to the end of the layout. Because the stored config
doesn't match the current outputs, apply_configuration() will routinely
fail, leaving the additional display unconfigured. In this case, it's more
useful to just fall back to creating a new default configuration from
scratch so that all outputs get configured to their preferred mode.
Move logic for creating different types of configurations into separate
functions. This keeps things a bit cleaner and allows us to add alternate
configuration types more easily.
WindowActors can outlive their corresponding window to animate unmap.
Unredirecting the actor does not make sense in that case, so make
sure to not request it.
https://bugzilla.gnome.org/show_bug.cgi?id=740133
When a laptop's lid is closed we try to build and apply a temporary
configuration that disables the laptop's display if we have other
outputs.
This isn't enough though, we must also check if at least one of these
other outputs is enabled otherwise we'll try to resize the screen to
0x0 which (rightfully) hits an assertion.
https://bugzilla.gnome.org/show_bug.cgi?id=739450
The input region currently only gets scaled by the surface
scale while ignoring the output scale, which causes input events to not get
delivered correctly for clients on hidpi screens. So take the output scale
into account when doing so.
https://bugzilla.gnome.org/show_bug.cgi?id=739161
This commit is wrong, it assumes that the scale only applies to the one
set by the client but its not. meta_surface_actor_wayland_scale_texture
also handles the output scale. Revert the commit to fix hidpi for wayland
clients like weston-terminal.
This reverts commit 0364ea9140.
https://bugzilla.gnome.org/show_bug.cgi?id=739161
Since GTK+ commit 3a337156d11a86c7, save()/restore() may only be
used for subelements; in this particular case, the change broke
the backdrop state in decorations. Luckily we don't actually need
the save()/restore() pair anyway, as we only touch the context's
state and always set it explicitly.
The set/unset branches of meta_display_update_pointer_emulating_sequence()
have been split and put directly where it makes sense. The pointer emulated
sequence will be updated before processing the CLUTTER_TOUCH_BEGIN, and
after processing the CLUTTER_TOUCH_END, this way the checks on this hold
true during all the sequence lifetime.
https://bugzilla.gnome.org/show_bug.cgi?id=738411
If the actor surface has an input mask, custom picking is implemented
for the portions affected by the mask, although the child actors (most
usually subsurfaces) are left out.
https://bugzilla.gnome.org/show_bug.cgi?id=738890
Returning FALSE here gets the button release event propagated to the
client on wayland, which is unexpected after xdg_surface.move/resize()
have been called.
https://bugzilla.gnome.org/show_bug.cgi?id=738888
It turns out that this was wrong because MetaWindow->monitor points to
the old monitor infos and they are needed to position windows in the
new configuration which happens in a monitors-changed handler.
This reverts commit e1704acda4.
The code in MetaMonitorConfig was really complex and was trying to do
way too much, using multiple different variables to determine where
things were stored, and trying to do fancy tricks to transfer
ownership.
Add a refcounting system to help simplify this, and clean up the logic.
Simply along the way, this fixes multiple bugs in the monitor config
logic, most notably bug #734889, which was my original goal to fix.
The X server sends several RRScreenChangeNotify events in a burst when
something happens which, currently, causes us to rebuild our view of
the world as many times and notify the upper layers about it which
causes a lot of bogus repeated work like rebuilding background actors.
We can avoid this extra work by looking at the timestamp in the
XRRScreenResources struct which is updated when an X client (including
us!) last changed something and comparing it with the previous
timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
meta_monitor_config_match_current() only matches the number of outputs
and if the output connector, vendor, product and serial match.
In the X backend, this means that we can't use it to bypass doing any
work because it won't detect cases where we actually want to update
ourselves like e.g. an output being turned off either by us or by
another X client (e.g. xrandr).
In the native backend, unlike the xrandr backend, we only get called
on real hotplug events and thus should always trigger the common
hotplug code to (possibly) apply a new mode so the check is pointless
anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=738630
In randr events, configTimestamp can be considered the hotplug time,
i.e. whenever the server notices hardware changes, this value will be
updated.
Having that in mind, we can re-work the logic to make it clearer.
There are no semantic changes.
Commit 2f9c601 accidentally changed the logic here, changing the grab
behavior when not using raise-on-click. Fix this.
Spotted-by: Adam Goode <adam@spicenitz.org>
From a quick code search and grep of gnome-themes-standard, none of
the themes that I inspected used this feature. Since it's the last
thing that uses a lot of old legacy GdkPixbuf code, I'd rather just
consider the feature unsupported at this point and clean up everything
I need to.
https://bugzilla.gnome.org/show_bug.cgi?id=662962
Fullscreen windows look weird when they are overlapped by system chrome,
which currently happens when another window is stacked above. We used to
auto-minimize fullscreen windows in that case, which proved to be both
unreliable and unpopular. So instead, keep the system chrome hidden even
when the fullscreen window is not stacked at the top.
https://bugzilla.gnome.org/show_bug.cgi?id=693991
We clip the input region to the client rect, so the client rect should
be up to date before we fetch the input region.
This fixes popup windows not working in GTK+2 under Wayland.
We should also update the shape / input regions when the window is
reconfigured for a complete fix, so that making an O-R window bigger
doesn't confuse mutter, but let's leave that to a future commit.
The constructor would collect windows that are sticky before initializing its state
which would lead to a crash in the case of windows with struts which trigger a work
area recalculation where mutter would assume, due to uninitialized state, that an
existing work area has to be freed.
https://bugzilla.gnome.org/show_bug.cgi?id=738384
Damage coordinates are relative to the drawable not to the screen. So we
have to check whether x and y are 0 and not window_rect.x/y otherwise the
herustic will never trigger for windows on monitors whos x and y are not 0.
https://bugzilla.gnome.org/show_bug.cgi?id=738271
The key event should be interpreted by clients with the modifier state
as it was before the event itself just as in X11 input events.
Achieving this in wayland is a matter of sending the key event first
and the modifiers after (if needed).
This isn't really specified in the wayland protocol but it matches
weston's behavior and should avoid corner cases in clients.
https://bugzilla.gnome.org/show_bug.cgi?id=738238
This reverts commit 33acb5fea0.
The issue here is that the pointer actor does not actually get reset
when the actor's reactivity changes, so we end up with stale picks after
actors are destroyed.
I have a local patch to Clutter for this, but I don't have time to
submit it upstream, so let's just use the ugly code for now.
This reverts commit e496ed50d6.
This was incorrect. wl_surface_destructor actually does the full repick
-- doing it here is dangerous, because the destroy listeners actually
run *before* the destructor, not after, so the surface is still alive.
We never want to send pressed keys to wayland clients on enter. The
protocol says that we should send them, presumably so that clients can
trigger their own key repeat routine in case they are given focus and
a key is physically pressed.
Unfortunately this causes some clients, in particular Xwayland, to
register key events that they really shouldn't handle, e.g. on an
Alt+Tab keybinding, where Alt is released before Tab, clients would
see Tab being pressed on enter followed by a key release event for
Tab, meaning that Tab would be processed by the client when it really
shouldn't.
Since the use case for the pressed keys array on enter seems weak to
us, we'll just fake that there are no pressed keys instead which
should be spec compliant even if it might not be true.
https://bugzilla.gnome.org/show_bug.cgi?id=727178
It only contained a pointer to a wl_resource, which isn't much of
value. Just replace it with the wl_resource instead. Any future private
data should be handled by our future role system.
There's a small window before a window that is being unmanaged is
unregistered with the display. The MetaScreen::window-left-monitor
and MetaWorkspace::window-removed emissions fall right into that
window, so code that runs in that time may well be out of our
control; we can make sure that the method it can use to get an
updated list of windows no longer contains the destroyed window
though, which is a much better option than expecting everyone to
filter the list themselves.
The actor is updated on DnD grab motion events, properly notified
when dragging finishes, and destroyed if the client/surface disappear
below its feet.
This actor is a subclass of MetaFeedbackActor that additionally
implements the "drag failed" animation, snapping back to the drag
origin position in a surface.
This actor is a non-reactive container that autoembeds itself into
the feedback window group in the compositor. The API is meant to
help on creating things attached to pointer/touchpoints, with an
X/Y attachment offset, and following the position of certain events.
Although not strictly a window group... This ClutterActor is
meant to stay always on top, and only show non-reactive actors
created by Mutter itself. Two possible usecases for this layer
are DnD surfaces, and touch spots.
We might also want to move cursors out of an overlay in MetaStage
into here at some point.
Keeping track of the surface will be necessary in case it is destroyed
during DnD, and the coordinates will be useful when figuring out the
snap back coordinates.
In Wayland, popup window types are not override-redirect, and thus can
steal window focus away from their parent window when clicked on.
This means that we need to make sure their appearance is properly
propagated to the parent windows so the parent windows don't lose their
focus while they're propagated.
When grabbing with DND, we need to leave the pointer alone and
under the client's control. The code here was a bit messy before about
when it unset the window cursor -- it did it whenever there was no
current surface after repicking, which is a bit wrong, since it will
fire during a drag grab.
Move the check for this to update_cursor_surface, which is our standard
"sync" API for this, and then call update_cursor_surface after we set
the focus.
During a DND grab, pointer->focus_surface is NULL, since the wl_pointer
doesn't have any focused surface (it's in drag mode). In this case, the
drag interface has control of the focus, and when dragging into a NULL
surface, drag_grab_focus won't get called, properly detaching it from
the previous surface.
Let the interface->focus implementation do the fizzling out.
In the future, we should split out wl_pointer's implementation
(pointer->focus_surface) from the Wayland side of the generic pointer
wrapper (pointer->current) and use our event routing system to determine
or similar whether it should go to wl_pointer or wl_data_device.
The code here was a bit messy with the addition of
hotplug_mode_update, and the comments were a bit confusing and
inaccurate. Clean it up and comment it a bit better to make the flow and
intention more clear.
We need to tell clutter's evdev backend about the desktop's key repeat
settings so that our own key bindings event processing and
gnome-shell's chrome widgets get their fake key events for continuous
key press as they expect.
Note that the wayland frontend filters out these events and thus
wayland clients do not see them as specced.
https://bugzilla.gnome.org/show_bug.cgi?id=728055
The X server applies a default keymap to hotplugged keyboard
devices. To enforce our current settings we must re-upload the keymap
when a new keyboard shows up.
Note that setting the VCK keymap causes the server to propagate it
to all slave keyboard devices.
https://bugzilla.gnome.org/show_bug.cgi?id=737673
Since we now directly expose the reverses bindings directly, we
don't have to have this special-case in do_choose_window.
More importantly, if the backwards binding is pressed and has the Shift
key included, this will actually revert it
This doesn't matter for Alt-Tab in gnome-shell, which already replaces
it with a better Alt-Tab replacement, but it does matter for Alt-Esc,
which switches between windows directly.
Windows are relocated before their workspace is removed, however this
is only necessary for windows that are *only* on that workspace; for
windows on all workspaces, that step is annoying as it will unset the
sticky state requested by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=737625
The workspace MRU lists are updated when windows are managed/unmanaged
or change workspaces. However those updates obviously only apply to
existing workspaces - new workspaces will always start out with an empty
MRU list, despite sticky windows already being "on" that workspace.
As we now assert that the list contains all windows located on the
workspace, we need to initialize it correctly to avoid a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=737581
We only grant requests to set the demands-attention hint if the window
is at least partially obscured; so for non-minimized windows on the
active workspace, we check if any other window on the same workspace
that is higher in the stack overlaps.
However in the case of a sticky window, window->workspace is NULL, so
we end up considering any non-sticky window on a different workspace.
At this point we have already established that the window is showing
on the active workspace, so use that to filter for windows that may
overlap.
Since the introduction of set_workspace_state(), window->workspace
will always be NULL when on_all_workspaces is set - passing that
to a workspace function that does not validate its input will then
result in a crash.
Use the get_workspace() function instead, which will always return
a valid workspace.
Since commit 2eec11b445, windows without a __NET_WM_DESKTOP property
that should be on all workspaces are not added to the active workspace;
this is correct, however not adding them to any workspace is not ...
We overrode the property for PowerSaveMode, which meant that gdbus's
auto-generated PropertiesChanged code wasn't being run.
This really confused gnome-rr and gnome-settings-daemon's power plugin
about the current DPMS state of the display, since they used their
cached PowerSaveMode properties, and never saw a PropertiesChanged being
emitted.
If a display was on, they set it to off, and then set it back on, the
setting back on would never fire, since they thought the display was
already off.
To fix this, remove our custom property override and just respond to
notifications on the object.
Namely, this fixes the DPMS management when receiving notifications so
that it now properly times out.
set_workspace_state () returns early when the desired sticky state
and workspace match the current property values, assuming that the
corresponding MRU lists are already correct in that case.
However that might not be the case when we are setting the initial
state, so don't take the shortcut in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=737178
A window may either be sticky because it has been requested as such,
or because it is placed on a non-primary monitor (and the corresponding
preference is set). While we do take the latter into account, we
currently override the sticky state later during initialization;
be a bit more careful there to get the initial state right.
https://bugzilla.gnome.org/show_bug.cgi?id=737178
Use the new DRM capabilities to figure out the correct cursor size, and
make sure that matches instead of hardcoding 64x64. This fixes incorrect
rendering on some newer AMD cards that support 256x256 cursors.
Based heavily on a patch by:
Alvaro Fernando García <alvarofernandogarcia@gmail.com>
Commit 1af0033368 made a subtle change
regarding how XKeysymToKeycode behaves. It does a depth first search
while XKeysymToKeycode is documented to do a breadth first search:
"this function looks in each column of the core keyboard mapping in
turn and returns the lowest numbered key that matches in the lowest
numbered group" - from the XKB library documentation
Looping over all keycodes for each layout and level index makes us go
back to the previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=737134
With the change to how hidden windows are stacked, the position
of the guard window with respect to the hidden windows got flipped
and the guard window was at the bottom of everything; fix it to
be on top of the hidden windows.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Add commands to request the client to minimize or unminimize the window;
unminimize doesn't currently work for GTK+ because it expects XMapRequest
to be received by the window manager, but the window is already mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Allow putting '|' into the list of windows for assert_stacking to
represent the position of the guard window. Not present is the same
as at the beginning (bottom) of the list.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Sometimes (for example with minimization) a request from the client
causes queued work rather than immediate work; so make the test client
'wait' command wait for a full frame cycle.
https://bugzilla.gnome.org/show_bug.cgi?id=737233
Commit 2f229c3928 removed the code to compute the above-tab
keycode and replaced it with a simple constant from linux/input.h.
We obviously cannot depend on linux headers on non-linux systems,
so provide a fallback definition in that case (which is expected
to work assuming the system is using the Xorg xf86-input-keyboard
driver).
https://bugzilla.gnome.org/show_bug.cgi?id=737135
The titlebar rect is in window coordinates, while screen regions are
obviously not. Fix by translating into screen coordinates before
testing for overlaps.
https://bugzilla.gnome.org/show_bug.cgi?id=736915
The coordinates in ConfigureNotify *should* be the coordinates of the
client window; using the coordinates of the frame window compensated for
a problem with the interpretation of StaticGravity for some clients but
broke other clients.
This reverts commit f4f70afe31.
https://bugzilla.gnome.org/show_bug.cgi?id=736719
Some applications, like totem, create keyboard/pointer objects from the
same client, and expect it to work. We made this work a while ago, but
due to an oversight in the code, we increment the serial on button press
for every resource that we need to send events to.
Since operations like move/resize use the grab serial of the devices to
determine whether the operation is exact, we need to make sure the same
serial goes to all devices.
Restructure the code so that all that's in the resource loop is the
sending of the event -- all the calculation that's needed happens
outside.
This fixes moving / resizing the Totem window not working sometimes.
https://bugzilla.gnome.org/show_bug.cgi?id=736840
The fix in d61dde1 regressed the position of popup windows, since the
size was 0x0 when we wanted to do a sole move. Only fizzle out in the
path where we actually *do* resize.
https://bugzilla.gnome.org/show_bug.cgi?id=736812
Going through GSD's settings was done in context of patches that
did not land; it is simpler and more consistent with GTK+ to use
the corresponding XSetting instead.
We only broadcast input to the focus_resource_list, so we need to make
sure it's put in the proper list on startup.
This fixes input not working for windows when they first appear.
Argh. There's always more stuff to fix with keyboard/pointer. Every
single time I think I've fixed it, more stuff pops up.
GTK+ requests get_xdg_surface before attaching a buffer, and since it
might take a long time for GTK+ to get around to attaching a buffer and
committing it, our idle for MOVE_RESIZE will kick in beforehand.
And our idle will try to resize the 0x0 window that currently exists,
constrain it to 1x1, which will send a configure event of 1x1 to the
window while it boots up, causing it to awkwardly resize to the minimum
size of the window.
Make sure that in this case, our idle doesn't cause any problems, and
that we fizzle out any idles like this.
The "proper" way to do this would be to delay the creation of the
MetaWindow until a surface is committed, but that's difficult for a
variety of reasons, and might cause unintended issues with focus.
This prevents issues from happening when processing Enter/Leave events
while in another kind of grab op like a Wayland popup or resizing a
window.
This can't ever really happen except outside of a race condition,
with the X server, since we won't ever pass input events to the
X server in any of these cases, but it can't hurt to be more correct
about what the intended operation is.
GTK+ focuses its own windows with RevertToParent, which means that when
a GTK+ CSD window is destroyed, the X server will set the focus back to
the root window. The event stream that we is an UnmapNotify followed by
a FocusOut event. Our own UnmapNotify-handling code unmanages the window
and forcibly changes the focus to the next default window in the stack.
Since UnmapNotify events don't come with timestamps, we query for one,
and set the window focus using that.
But there's *still* a FocusOut event in the stack, with an older
timestamp and serial than our own focusing. We see this, throw it out
since it's older than the most recent focus, but then our own code that
notices the root has been focused kicks in and tries to focus the
default window... using a timestamp older than our most recent focusing.
meta_display_sanity_check_timestamps notices this, and (rightly so)
puts a warning in our face, telling something is awry.
Only let our workarounds kick in when the event is new enough, otherwise
our code will get confused over old events.
This stops the:
Window manager warning: last_focus_time (367917173) is greater than comparison timestamp (367917170). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around...
warning spam when closing a CSD window.
The last_sent size is effectively what size we should send in configure
requests where the size hasn't changed. Thus, if an app commits a new
size, we need to make sure we respect it and don't reconfigure it with
a size it wasn't expecting when the state changes.
This fixes apps being sent a configure event with 0, 0 on startup,
which was confusing Clutter into displaying a 0x0 viewport.
Restacking the frame for a window while unmanaging the window is
harmless, but for undecorated (in particular, client-side-decorated)
windows, this causes problems because the window is typically
destroyed by the client immediately after withredrawing the window.
Skip windows flagged as being unmanaged when assembling the new
stack and when comparing the old order to the new stack.
Add a stacking test for this.
Windows can be freed at some point after they are unmanaged - because
there is an effect in progress, because a language binding is holding
a reference. Therefore, we need to clean up the later to associate
the xwayland and wayland windows deterministically in an "unamanaged"
handler.
https://bugzilla.gnome.org/show_bug.cgi?id=736694
g_idle_add() makes no guarantee about when it will be run - if Mutter
is busy drawing and blocking glXSwapBuffers() it could happen only
minutes later. Use meta_later_add (META_LATER_BEFORE_REDRAW) instead -
this will deterministically be run after the Wayland socket is read
from but before the next frame is painted.
https://bugzilla.gnome.org/show_bug.cgi?id=736694
We shouldn't scale the cursor size in mutter we g-s-d exports
the correct size on hidpi so use gtk-cursor-theme-size.
This way we also catch changes on resolution updates.
https://bugzilla.gnome.org/show_bug.cgi?id=729337
This reverts commit 4fe66ce0a9.
This is wrong ... we should not scale the cursor size but read
the cursor xsettings that gets exported by gsd. Also this won't update on
resolution changes.
https://bugzilla.gnome.org/show_bug.cgi?id=729337
When restacking the last window alone, we would trigger this off-by-one
error. This would throw us off the end of the array, causing lower_below
warnings for nonsensical values.
Since the last window already is lowered below everything else, we
shouldn't need to lower it.
The merge of the commit af46ef3b 'meta_window_new: clean up error handling'
to the wayland branch accidentally added an extra call to meta_error_trap_push(),
meaning that we leaked one level of error traps for each new window.
Fixes warning:
Gdk-WARNING **: XSetErrorHandler() called with a GDK error trap pushed.
https://bugzilla.gnome.org/show_bug.cgi?id=736589
When the screen resizes, we get a configure event for the composite overlay
window - don't pass that to MetaStackTracker, since the COW isn't in the
stack.
Fixes warning:
mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x65 not in stack
We have a quite accurate view of the X stack, so there's no good reason to ask
the X server to do restacking that has no effect. (Restackings that have no
effect on either X windows or Wayland windows were generally optimized out in
the synchronization code, but in other cases like moving an X window that is
only beneath Wayland windows to the top of the stack we would make such
requests.)
Removing such requests:
- Is a small efficiency win in itself
- Allows us to immediately go ahead and apply Wayland changes to the verified stack
- Prevents queued Wayland changes piling up waiting for an X event that will never
be received, since the X server will not send confirmation of no-op restacks.
Since such operations may still have an effect on the relative stacking of X
and Wayland windows, we need to continue applying them to the local stack.
https://bugzilla.gnome.org/show_bug.cgi?id=736559
Now that all actual stack shuffle is handled inside stack-tracker.c, we can make
meta_stack_tracker_record_[raise_above/lower_below] internal to that file and
remove the unused meta_stack_tracker_record_lower().
https://bugzilla.gnome.org/show_bug.cgi?id=736559
stack.c:sync_stack_to_xserver had both code for assembling the desired stack, and
code for enforcing the desired stack on the actual stack of X and Wayland windows;
the latter part is properly the domain of stack-tracker.c; moving the code to
apply the stack there both simplifies it and keeps stack.c more manageable.
https://bugzilla.gnome.org/show_bug.cgi?id=736559
There was still code in stack.c to handle skipping override-redirect windows,
but since quite a while ago, meta_stack_add() is not called for OR windows
since they are outside our stacking control. Add an assertion and remove
unnecessary code.
https://bugzilla.gnome.org/show_bug.cgi?id=736559
stack.c kept it's own record of the last stacking it requested, so that
restacking could be done with minimal moves, but we already have a better
view of the stacking order with the stack tracker, so use that instead.
This allows eliminating the special case for the first restack.
https://bugzilla.gnome.org/show_bug.cgi?id=736559
Since MetaStackTracker is the code that knows about the current X stacking order
and the relationship between X windows and Wayland windows, it's cleaner to
encapsulate stack manipulation in MetaStackTracker rather than have the calling
code make the X calls and only call into MetaStackTracker to inform it about
the changes.
https://bugzilla.gnome.org/show_bug.cgi?id=736559
The step where we requery the stacking order from the server than combine
it in an arbitrary fashion with Wayland windows can be eliminated by observing
that we are the final authority for Wayland window stacking - so if we
apply each X event that we receive from the X server to our stack in a
way that leaves the X windows ordered in the same way as on the server,
and apply events that we have stored locally in a way that doesn't affect
the ordering of X windows, than we have a fully correct ordering of windows.
Ordering this in the order of first applying the X event and then applying the
local portion also means that as long as we had an up-to-date view of the X
stack the composite operation will be identical to what was requested.
https://bugzilla.gnome.org/show_bug.cgi?id=736559
