commit 188752158 changed cogl to stop needlessly creating its own
monitor output configuration when mutter would just soon overwrite
it anyway.
Unfortunately, that commit is causing a crash in some cases because
cogl will now create and later draw to a 0x0 egl surface until mutter
sets the monitor layout.
This commit changes cogl to avoid creating and using a surface, before
it knows how big of a surface to create.
https://bugzilla.gnome.org/show_bug.cgi?id=758073
If we get EACCES from drmPageFlip we're not going to get
a flip event and shouldn't wait for one.
This commit changes the EACCES path to silently ignore the
failed flip request and just clean up the fb.
https://bugzilla.gnome.org/show_bug.cgi?id=756926
ES3 provides glMapBufferRange as core, with the added bonus that it also
supports read mappings. Use this where possible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728355
GLES2 does not support passing READ to glMapBuffer; attempting to call
cogl_buffer_map for read on ES2 will bring it down with an assert. Make
sure COGL_DEBUG=journal doesn't do this when it's not possible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=728355
On Wayland deinit() of an onscreen buffer is going to destroy the
associated native window of an EGLSurface. So we should destroy the
EGLSurface as well otherwise we might end up confusing the GL driver.
We also currently guard against setting a EGL_NO_SURFACE as current
EGLSurface, but this shouldn't be a problem if we have a surfaceless
context. So we allow surface destruction under that condition.
https://bugzilla.gnome.org/show_bug.cgi?id=754667
If the user switches VTs in the middle of a page flip, the
page flip operation may fail with EACCES. page flipping will
work next time the VT becomes active, so we shouldn't disable
page flipping in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
If cogl fails to open the drm device, initialize gbm, or open the
egl display, then it closes the drm fd, uninitializes gbm, closes the
display and then calls _cogl_winsys_renderer_disconnect which does
most of those things again, on the, now deinitialized, members.
This commit removes the explicit failure handling in renderer_connect and
defers cleanup to disconnect.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
gbm confusingly has two different format types, and cogl
is using the wrong one in some of its calls to gbm_surface_create
This commit fixes the calls that are wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=754540
glGetIntegerv (GL_DEPTH_BITS, ...) and friends are deprecated in GL3; we
have to use glGetFramebufferAttachmentParameteriv() instead, like we do
for offscreen framebuffers.
Based on a patch by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=753295
We want to be able to retrieve the XVisualInfo used when creating the
GL context under GLX and EGL-X11, so that we can use the visual before
we have an onscreen frame buffer.
Initialize variables; GCC does not always catch all cases where the
variables are used after being initialized, especially when it comes to
out parameters.
Some drivers ( like mgag200 ) don't yet support drmModePageFlip.
This commit forgoes waiting for vblank and flips right away
in those cases. That prevents the hardware from freezing up the screen,
but does mean there will be some visible tearing.
https://bugzilla.gnome.org/show_bug.cgi?id=746042
We can't just destroy and replace the EGL and gbm surfaces while
they are still in use i.e. while there is a pending flip. In fact, in
that case, we were calling gbm_surface_destroy() on a surface that
still had the front buffer locked and then, on the flip handler,
gbm_surface_release_buffer() for a buffer that didn't belong to the
new surface.
Instead, we still allocate new surfaces when requested but they only
replace the old ones on the next swap buffers when we're sure that the
previous flip has been handled and buffers properly released.
Currently the code queries the current msc then tries to approximate the
value of the next msc satisfing the modulus 2 for when to wait. This
introduces some instability as the msc may tick over during the
roundtrip leading to a 32ms wait instead of a 16ms wait. This happens
often enough to cause jerky animations, and affect gnome-shell-perf-tool.
A simpler solution is just use a single roundtrip by using WaitForMsc to
ask the driver to compute the next vblank itself.
Cc: Owen W. Taylor <otaylor@fishsoup.net>
Cc: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Robert Bragg <robert@sixbynine.org>
Add cogl_texture_pixmap_x11_new_left() and
cogl_texture_pixmap_x11_new_right() (which takes the left texture
as an argument) for texture pixmap rendering with stereo content.
The underlying GLXPixmap is created using a stereo visual and shared
between the left and right textures.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
If we want to show quad-buffer stereo with Cogl, we need to pick an
appropriate fbconfig for creating the CoglOnscreen objects. Add
cogl_onscreen_template_set_stereo_enabled() to indicate whether
stereo support is needed.
Add cogl_framebuffer_get_stereo_mode() to see if a framebuffer was
created with stereo support.
Add cogl_framebuffer_get_stereo_mode() to pick whether to draw to
the left, right, or both buffers.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
An application might for whatever reason want to control a specific output
directly and have cogl only swap the other outputs if any. So add an api that
allows setting a crtc to be ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=730536
The surfaceless context extension can be used to bind a context
without a surface. We can use this to avoid creating a dummy surface
when the CoglContext is first created. Otherwise we have to have the
dummy surface so that we can bind it before the first onscreen is
created.
The main awkward part of this patch is that theoretically according to
the GL and GLES spec if you first bind a context without a surface
then the default state for glDrawBuffers is GL_NONE instead of
GL_BACK. In practice Mesa doesn't seem to do this but we need to be
robust against a GL implementation that does. Therefore we track when
the CoglContext is first used with a CoglOnscreen and force the
glDrawBuffers state to be GL_BACK.
There is a further awkward part in that GLES2 doesn't actually have a
glDrawBuffers state but GLES3 does. GLES3 also defaults to GL_NONE in
this case so if GLES3 is available then we have to be sure to set the
state to GL_BACK. As far as I can tell that actually makes GLES3
incompatible with GLES2 because in theory if the application is not
aware of GLES3 then it should be able to assume the draw buffer is
always GL_BACK.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
(cherry picked from commit e5f28f1e75db9bdc4f2688f420a74f908f96cf76)
Conflicts:
cogl/winsys/cogl-winsys-egl-kms.c
cogl/winsys/cogl-winsys-egl-x11.c
Some features that were previously available as an extension in GLES2
are now in core in GLES3 so we should be able to specify that with the
gles_availability mask of COGL_EXT_BEGIN so that GL implementations
advertising GLES3 don't have to additionally advertise the extension
for us to take advantage of it.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
(cherry picked from commit 4d892cd97558da61ba526f947ac0555ebab632d2)
When a new CoglAtlasTexture tries to fit into an existing CoglAtlas
it should make sure the atlas stays valid while it expands.
https://bugzilla.gnome.org/show_bug.cgi?id=728064
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 2eec9758f67e9073371c2edd63379324849373c4)
This can happen when we dpms off the output or when login1 takes away
drm master status from our drm fd. In either case, we need to call
the swap notify handler so that the compositor dosn't get stuck waiting
for that notification. The compositor should stop repainting shortly in
both cases, as it's either going into dpms off mode or vt switching away.
https://bugzilla.gnome.org/show_bug.cgi?id=728979
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This environment variable predates the reliable platform detection in mesa
and typically just causes crashes when the specified platform doesn't
match what's passed in. Aside from being unecessary and problematic
it also leaks into the GNOME session, preventing clients from
automatically detecting the wayland platform.
https://bugzilla.gnome.org/show_bug.cgi?id=728978
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Prevent Cogl function names from being mangled when a C++ compiler is
being used by adding some missing COGL_{BEGIN,END}_DECLS guards.
https://bugzilla.gnome.org/show_bug.cgi?id=728628
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Commit 1b2dd815 (Registers gtypes for all public objects and structs)
introduced GCCism's in its use of varargs, which broke the build of Cogl
on other non-GCC compilers, such as Visual Studio.
Define the COGL_GTYPE_DEFINE_BASE_CLASS and COGL_GTYPE_DEFINE_CLASS macros
using ISO-style varargs so that the build of Cogl can be fixed on non-GCC
compilers.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Remove #pragma directives that causes any applications that use Cogl to
link to the SDL libraries when Cogl was built with the SDL winsys. This is
mainly due to the availability of both SDL-1.x and SDL-2.x support in the
SDL winsys, where different libraries are linked for SDL-1.x and SDL-2.x.
To avoid having to link to the SDL/SDL2 libraries when the application code
is not directly using SDL/SDL2, define SDL_MAIN_HANDLED in the CFLAGS so
that SDL's wrapper main() implementation will not be used when the
application is being built.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit c3035912833eabe1f6dadbea23c78e595aac79dc)
In Lionel's work for supporting introspection better for Cogl, a number of
public symbols were added for Cogl and Cogl-Path, so add these symbols to
cogl.symbols and cogl-path.symbols so that they can be exported, which will
fix the build of the Cogl conformance test and the introspection files
for the Windows-based builds.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This macro is internal to gobject so using it risks breaking Cogl if
glib changes its API. Instead we just use its expansion. Note that
glib provides two expansions for this depending on the glib version
but this only uses the one for older versions.
Reviewed-by: Robert Bragg <robert.bragg@intel.com>
This adds much more comprehensive support for gobject-introspection
based bindings by registering all objects as fundamental types that
inherit from CoglObject, and all structs as boxed types.
Co-Author: Robert Bragg <robert@linux.intel.com>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Remove the symbols that are now in cogl-path (where cogl-path.symbols
already include), and add the symbols that were added to the Cogl API.
Also add internal symbols as required by cogl-path and cogl-pango.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
The DriverCallback is a function that is defined by the Windows SDK 8.0+
headers, which was initially used for device driver development. The use
of DriverCallback would cause a clash, causing things to break when built
with newer Windows SDKs, so rename DriverCallback to CoglDriverCallback to
avoid this problem.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
To help facilitate integration with third party frameworks this exposes
the EGL context and display to applications as well as the GLX context.
(Note that the GLX display is already available via
cogl_xlib_renderer_get_display())
This adds a new top-level <cogl/cogl-glx.h> header that needs to be
included explicitly to access the glx specific api.
Anyone using these apis will be responsible for checking that Cogl
is indeed using EGL or GLX by calling cogl_renderer_get_winsys_id()
This will enable GStreamer, for example, to be able to create a GL
context that shares resources with Cogl's context.
https://bugzilla.gnome.org/show_bug.cgi?id=724992
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This splits out the GLeglImageOES define in cogl-egl.h into a private
cogl-egl-private.h header and updates the guards in cogl-egl.h to be
consistent with other top-level headers where we need to be careful
about how __COGL_H_INSIDE__ is defined and undefined, esp when the
gobject introspection scanner is running.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This ensures we use EGLNativeWindowType and EGLNativeDisplayType
everywhere instead. The previous names come from EGL 1.2 but it seems
reasonable to require more recent EGL versions. If someone wanted to add
compatibility for EGL 1.2 later it would be straightforward to define
the new names to the old.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
SDL2 supports selecting between full OpenGL or OpenGL ES 1/2 but our
selection code was written before SDL 2.0 was officially released and
since then a new SDL_GL_CONTEXT_PROFILE_MASK attribute was added and
we have to explicitly set the SDL_GL_CONTEXT_MINOR_VERSION attribute.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
This adds a new COGL_FEATURE_ID_BUFFER_AGE feature id that can be used
to determine if cogl_onscreen_get_buffer_age() will ever return an age
other than 0. This should be used instead of querying the winsys feature
via cogl_clutter_winsys_has_feature().
Reviewed-by: Neil Roberts <neil@linux.intel.com>
