When uploading data for GLES we need to deal with cases where the
rowstride is too large to be described only by GL_UNPACK_ALIGNMENT
because there is no GL_UNPACK_ROW_LENGTH. Previously for the
sub-region uploading code it would always copy the bitmap and for the
code to upload the whole image it would copy the bitmap unless the
rowstride == bpp*width. Neither paths took into account that we don't
need to copy if the rowstride is just an alignment of bpp*width. This
moves the bitmap copying code to a separate function that is used by
both upload methods. It only copies the bitmap if the rowstride is not
just an alignment of bpp*width.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
The ffs function is defined in C99 so if we want to use it in Cogl we
need to provide a fallback for MSVC. This adds a configure check for
the function and then a fallback using a while loop if it is not
available.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
If we have to copy the bitmap to do the premultiplication then we were
previously using the rowstride of the source image as the rowstride
for the new image. This is wasteful if the source image is a subregion
of a larger image which would make it use a large rowstride. If we
have to copy the data anyway we might as well compact it to the
smallest rowstride. This also prevents the copy from reading past the
end of the last row of pixels.
An internal function called _cogl_bitmap_copy has been added to do the
copy. It creates a new bitmap with the smallest possible rowstride
rounded up the nearest multiple of 4 bytes. There may be other places
in Cogl that are currently assuming we can read height*rowstride of
the source buffer so they may want to take advantage of this function
too.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2491
The builtin vertex attribute for the normals was incorrectly checked
for as 'cogl_normal' however it is defined as cogl_normal_in in the
shader boilerplate and for the name generated by CoglVertexBuffer.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2499
Implement the ClutterStageWindow::set_accept_focus() virtual function in
the win32 backend.
If accept_focus is set to be TRUE then we call SetforegroundWindow()
after calling ShowWindow(). This is similar to what GDK does when
dealing with the same situation.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2500
Allow the developer to set whether the Stage should receive key focus
when mapped. The implementation is fully backend-dependent. The default
value is TRUE because that's what we've been expecting so far.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2500
If an actor is (unfortunately) queuing a relayout in relayout, you would
end up with (ClutterActor*)stage->needs_allocation set to TRUE and
stage->relayout_pending set to TRUE. But if then in the same cycle, an
actor calls clutter_actor_get_allocation_box, that will trigger another
(recursive) _clutter_stage_maybe_relayout, which will wrongly reset the
relayout pending to FALSE, while not actually performing a new relayout
because of the re-entrancy protection.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2503
Other frameworks expose the same functionality as "auto-reverse",
probably to match the cassette tape player. It actually makes sense
for Clutter to follow suit.
The stage has a dirty flag to record whenever the viewport and
projection matrices need to be flushed. However after flushing these
the flags were never cleared so it would always redundantly update the
state.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2480
The ARBfp fragend was bypassing generating a shader if the pipeline
contains a user program. However it shouldn't do this if the pipeline
only contains a vertex shader. This was breaking
test-cogl-just-vertex-shader.
Adding an action should allow passing a user data pointer, and have a
notification action that gets called when removing the action. This
allows introspection and language bindings to attach custom data to the
action - for instance, the real callable object that should be invoked.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2479
Previously, ClutterText took keyboard focus on mouse-down, regardless
if it were editable or selectable. Now it checks these properties,
and behaves like other actors if it can't do anything useful with
the focus.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2462
Previously Cogl would only ever use one atlas for textures and if it
reached the maximum texture size then all other new textures would get
their own GL texture. This patch makes it so that we create as many
atlases as needed. This should avoid breaking up some batches and it
will be particularly good if we switch to always using multi-texturing
with a default shader that selects between multiple atlases using a
vertex attribute.
Whenever a new atlas is created it is stored in a GSList on the
context. A weak weference is taken on the atlas using
cogl_object_set_user_data so that it can be removed from the list when
the atlas is destroyed. The atlas textures themselves take a reference
to the atlas and this is the only thing that keeps the atlas
alive. This means that once the atlas becomes empty it will
automatically be destroyed.
All of the COGL_NOTEs pertaining to atlases are now prefixed with the
atlas pointer to make it clearer which atlas is changing.
All of the drawing needed in _cogl_add_path_to_stencil_buffer is done
with the vertex attribute API so there should be no need to flush the
enable flags to enable the vertex array. This was causing problems on
GLES2 where the vertex array isn't available.
The GLES2 wrapper is no longer needed because the shader generation is
done within the GLSL fragend and vertend and any functions that are
different for GLES2 are now guarded by #ifdefs.
Once the GLES2 wrapper is removed then we won't have the GLenums
needed for setting up the layer combine state. This adds Cogl enums
instead which have the same values as the corresponding GLenums. The
enums are:
CoglPipelineCombineFunc
CoglPipelineCombineSource
and
CoglPipelineCombineOp
Once the GLES2 wrapper is removed we won't be able to upload the
matrices with the fixed function API any more. The fixed function API
gives a global state for setting the matrix but if a custom shader
uniform is used for the matrices then the state is per
program. _cogl_matrix_stack_flush_to_gl is called in a few places and
it is assumed the current pipeline doesn't need to be flushed before
it is called. To allow these semantics to continue to work, on GLES2
the matrix flush now just stores a reference to the matrix stack in
the CoglContext. A pre_paint virtual is added to the progend which is
called whenever a pipeline is flushed, even if the same pipeline was
flushed already. This gives the GLSL progend a chance to upload the
matrices to the uniforms. The combined modelview/projection matrix is
only calculated if it is used. The generated programs end up never
using the modelview or projection matrix so it usually only has to
upload the combined matrix. When a matrix stack is flushed a reference
is taked to it by the pipeline progend and the age is stored so that
if the same state is used with the same program again then we don't
need to reupload the uniform.
Sometimes it would be useful if we could efficiently track when a matrix
stack has been modified. For example on GLES2 we have to upload the
modelview as a uniform to our glsl programs but because the modelview
state is part of the framebuffer state it becomes a bit more tricky to
know when to re-sync the value of the uniform with the framebuffer
state. This adds an "age" counter to CoglMatrixStack which is
incremented for any operation that effectively modifies the top of the
stack so now we can save the age of the stack inside the pipeline
whenever we update modelview uniform and later compare that with the
stack to determine if it has changed.
This returns the layer matrix given a pipeline and a layer index. The
API is kept as internal because it directly returns a pointer into the
layer private data to avoid a copy into an out-param. We might also
want to add a public function which does the copy.
When the GLES2 wrapper is removed we can't use the fixed function API
such as glColorPointer to set the builtin attributes. Instead the GLSL
progend now maintains a cache of attribute locations that are queried
with glGetAttribLocation. The code that previously maintained a cache
of the enabled texture coord arrays has been modified to also cache
the enabled vertex attributes under GLES2. The vertex attribute API is
now the only place that is using this cache so it has been moved into
cogl-vertex-attribute.c
Previously when stroking a path it was flushing a pipeline and then
directly calling glDrawArrays to draw the line strip from the path
nodes array. This patch changes it to build a CoglVertexArray and a
series of attributes to paint with instead. The vertex array and
attributes are attached to the CoglPath so it can be reused later. The
old vertex array for filling has been renamed to fill_vbo.
The code to display the source when the show-source debug option is
given has been moved to _cogl_shader_set_source_with_boilerplate so
that it will show both user shaders and generated shaders. It also
shows the code with the full boilerplate. To make it the same for
ARBfp, cogl_shader_compile_real now also dumps user ARBfp shaders.
The GLSL vertend is mostly only useful for GLES2. The fixed function
vertend is kept at higher priority than the GLSL vertend so it is
unlikely to be used in any other circumstances.
Due to Mesa bug 28585 calling glVertexAttrib with attrib location 0
doesn't appear to work. This patch just reorders the vertex and color
attributes in the shader in the hope that Mesa will assign the color
attribute to a different location.
Some builtin attributes such as the matrix uniforms and some varyings
were missing from the boilerplate for GLES2. This also moves the
texture matrix and texture coord attribute declarations to
cogl-shader.c so that they can be dynamically defined depending on the
number of texture coord arrays enabled.
The vertends are intended to flush state that would be represented in
a vertex program. Code to handle the layer matrix, lighting and
point size has now been moved from the common cogl-pipeline-opengl
backend to the fixed vertend.
'progend' is short for 'program backend'. The progend is intended to
operate on combined state from a fragment backend and a vertex
backend. The progend has an 'end' function which is run whenever the
pipeline is flushed and the two pipeline change notification
functions. All of the progends are run whenever the pipeline is
flushed instead of selecting a single one because it is possible that
multiple progends may be in use for example if the vertends and
fragends are different. The GLSL progend will take the shaders
generated by the fragend and vertend and link them into a single
program. The fragend code has been changed to only generate the shader
and not the program. The idea is that pipelines can share fragment
shader objects even if their vertex state is different. The authority
for the progend needs to be the combined authority on the vertend and
fragend state.
This adds two internal functions:
gboolean
_cogl_program_has_fragment_shader (CoglHandle handle);
gboolean
_cogl_program_has_vertex_shader (CoglHandle handle);
They just check whether any of the contained shaders are of that type.
The pipeline function _cogl_pipeline_find_codegen_authority has been
renamed to _cogl_pipeline_find_equivalent_parent and it now takes a
set of flags for the pipeline and layer state that affects the
authority. This is needed so that we can reuse the same code in the
vertend and progends.
Previously enabling and disabling textures was done whatever the
backend in cogl-pipeline-opengl. However enabling and disabling
texture targets only has any meaning if no fragment shaders are being
used so this patch moves the code to cogl-pipeline-fragend-fixed.
The GLES2 wrapper has also been changed to ignore enabledness when
deciding whether to update texture coordinate attribute pointers.
The current Cogl pipeline backends are entirely concerned with the
fragment processing state. We also want to eventually have separate
backends to generate shaders for the vertex processing state so we
need to rename the fragment backends. 'Fragend' is a somewhat weird
name but we wanted to avoid ending up with illegible symbols like
CoglPipelineFragmentBackendGlslPrivate.
While we do check for compatibility and transformability of a GValue
with the GParamSpec value type, we are actually failing really badly
at it.
First of all, we bail out on the wrong conditions.
Then we use the type of the value passed instead of using the type
of the property itself.
This makes it impossible to actually use transformation functions for
GValue types - even those that have been registered by GLib itself -
when using the Animation API directly, instead of going through the
clutter_actor_animate() wrappers.
The ParamSpec sub-classes we define are meant to be used only from the C
API, as high-level languages completely ignore them.
The ClutterStageWindow interface is an internal type that escaped into
the public headers; all its methods are private, but we cannot remove
the type until we break for 2.0.
Currently clutter_list_model_get_iter_at_row() always returns an
iterator to the last non-filtered row when asking for row [1-N].
Patch makes the function return an iterator to the Nth non-filtered
row or NULL.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2460
Adapt to changes from these wayland commits:
35fd2a8cc68c42d90756330535de04cbbb4d2613
2bb3ebe1e437acf836449f0a63f3264ad29566f2
f8fc08f77187f6a5723281dab66841e5f3c24320
http://bugzilla.clutter-project.org/show_bug.cgi?id=2474
We are currently using a pipeline as a key into our arbfp program cache
but because we weren't making a copy of the pipelines used as keys there
were times when doing a lookup in the cache would end up trying to
compare a lookup key with an entry key that would point to invalid
memory.
Note: the current approach isn't ideal from the pov that that key
pipeline may reference some arbitrarily large user textures will now be
kept alive indefinitely. The plan to improve on this is that we will
have a mechanism to create a special "key pipeline" which will derive
from the default Cogl pipeline (to avoid affecting the lifetime of
other pipelines) and only copy state from the original pipeline that
affects the arbfp program and will reference small dummy textures
instead of potentially large user textures.
In the arbfp backend there is a seqential approach to finding a suitable
arbfp program to use for a given pipeline; first we see if there's
already a program associated with the pipeline, 2nd we try and find a
program associated with the "arbfp-authority" 3rd we try and lookup a
program in a cache and finally we resort to starting code-generation for
a new program. This patch slightly reworks the code of these steps to
hopefully make them a bit clearer.
_cogl_pipeline_needs_blending_enabled tries to determine whether each
layer is using the default combine state. However it was using
argument 0 for both checks so the if-statement would never be true.
There are a set of "EvalFlags" that get passed to _cogl_pipeline_hash
that can tweak the semantics of what state is evaluated for hashing but
these flags weren't getting passed via the HashState state structure
so it would be undefined if you would get the correct semantics.
According to 9cc9033347 the windows headers #define near as nothing,
and presumable the same is true for 'far' too. Apparently this define is
to improve compatibility with code written for Windows 3.1, so it's good
that people will be able to incorporate such code into their Clutter
applications.
Since c6493885c3 when building the EGL backend for eglx there was
no fallback in the init_events implementation so the X11 backend init
function would never get called. This was stopping it from receiving
any X events so a lot of things broke. It now just chains up.
When clutter_score_append_at_marker is called instead of
clutter_score_append the complete_id field of ClutterScoreEntry was
being left uninitialised. When the entry is eventually freed it would
sometimes try to disconnect an invalid signal id. This was causing
conformance test failures for me on GLES2.
We were trying to declare and initializing an arbfp program cache for
GLES but since the prototypes for the _hash and _equal functions were
only available for GL this broke the GLES builds. By #ifdefing the code
to conditionally declare/initialize for GL only this should hopefully
fix GLES builds.
The constant 'True' is defined by Xlib which isn't used for all clutter
builds so this replaces occurrences of True with TRUE which is defined
by glib. This should hopefully fix the win32 builds.
This adds a cache (A GHashTable) of ARBfp programs and before ever
starting to code-generate a new program we will always first try and
find an existing program in the cache. This uses _cogl_pipeline_hash and
_cogl_pipeline_equal to hash and compare the keys for the cache.
There is a new COGL_DEBUG=disable-program-caches option that can disable
the cache for debugging purposes.
This allows us to get a hash for a set of state groups for a given
pipeline. This can be used for example to get a hash of the fragment
processing state of a pipeline so we can implement a cache for compiled
arbfp/glsl programs.
_cogl_pipeline_equal now accepts a mask of pipeline differences and layer
differences to constrain what state will be compared. In addition a set
of flags are passed that can tweak the comparison semantics for some
state groups. For example when comparing layer textures we sometimes
only need to compare the texture target and can ignore the data itself.
In updating the code this patch also changes it so all required pipeline
authorities are resolved in one step up-front instead of resolving the
authority for each state group in turn and repeatedly having to traverse
the pipeline's ancestry. This adds two new functions
_cogl_pipeline_resolve_authorities and
_cogl_pipeline_layer_resolve_authorities to handle resolving a set of
authorities.
This removes the unused array of per-packend priv data pointers
associated with every CoglPipelineLayer. This reduces the size of all
layer allocations and avoids having to zero an array for each
_cogl_pipeline_layer_copy.
A non-static function named cogl_object_get_type was inadvertently added
during the addition of the CoglObject base type, but there is no public
prototype in the headers and it's only referenced inside cogl-object.c
to implement cogl_handle_get_type() for compatibility. This removes the
function since we don't want to commit to CoglObject always simply being
a boxed type. In the future we may want to register hierarchical
GTypeInstance based types.
To allow us to have gobject properties that accept a CoglMatrix value we
need to register a GType. This adds a cogl_gtype_matrix_get_type function
that will register a static boxed type called "CoglMatrix".
This adds a new section to the reference manual for GType integration
functions.
As a pre-requisite for being able to register a boxed GType for
CoglMatrix (enabling us to define gobject properties that accept a
CoglMatrix) this adds cogl_matrix_copy and _free functions.
In _cogl_pipeline_needs_blending_enabled after first checking whether
the property most recently changed requires blending we would then
resort to checking all other properties too in case some other state
also requires blending. We now avoid checking all other properties in
the case that blending was previously disabled and checking the property
recently changed doesn't require blending.
Note: the plan is to improve this further by explicitly keeping track
of the properties that currently cause blending to be enabled so that we
never have to resort to checking all other properties we can constrain
the checks to those masked properties.
This moves _cogl_pipeline_get_parent and _cogl_pipeline_get_authority
into cogl-pipeline-private.h so they can be inlined since they have been
seen to get quite high in profiles. Given that they both contain such
small amounts of code the function call overhead is significant.
This adds a debug option called disable-software-clipping which causes
the journal to always log the clip stack state rather than trying to
manually clip rectangles.
Before flushing the journal there is now a separate iteration that
will try to determine if the matrix of the clip stack and the matrix
of the rectangle in each entry are on the same plane. If they are it
can completely avoid the clip stack and instead manually modify the
vertex and texture coordinates to implement the clip. The has the
advantage that it won't break up batching if a single clipped
rectangle is used in a scene.
The software clip is only used if there is no user program and no
texture matrices. There is a threshold to the size of the batch where
it is assumed that it is worth the cost to break up a batch and
program the GPU to do the clipping. Currently this is set to 8
although this figure is plucked out of thin air.
To check whether the two matrices are on the same plane it tries to
determine if one of the matrices is just a simple translation of the
other. In the process of this it also works out what the translation
would be. These values can be used to translate the clip rectangle
into the coordinate space of the rectangle to be logged. Then we can
do the clip directly in the rectangle's coordinate space.
Previously in cogl-clip-state.c when it detected that the current
modelview matrix is screen-aligned it would convert the clip entry to
a window clip. Instead of doing this cogl-clip-stack.c now contains
the detection and keeps the entry as a rectangle clip but marks that
it is entirely described by its scissor rect. When flusing the clip
stack it doesn't do anything extra for entries that have this mark
(because the clip will already been setup by the scissor). This is
needed so that we can still track the original rectangle coordinates
and modelview matrix to help detect when it would be faster to modify
the rectangle when adding it to the journal rather than having to
break up the batch to set the clip state.
When logging a quad we now only store the 2 vertices representing the
top left and bottom right of the quad. The color is only stored once
per entry. Once we come to upload the data we expand the 2 vertices
into four and copy the color to each vertex. We do this by mapping the
buffer and directly expanding into it. We have to copy the data before
we can render it anyway so it doesn't make much sense to expand the
vertices before uploading and this way should save some space in the
size of the journal. It also makes it slightly easier if we later want
to do pre-processing on the journal entries before uploading such as
doing software clipping.
The modelview matrix is now always copied to the journal entry whereas
before it would only be copied if we aren't doing software
transform. The journal entry struct always has the space for the
modelview matrix so hopefully it's only a small cost to copy the
matrix.
The transform for the four entries is now done using
cogl_matrix_transform_points which may be slightly faster than
transforming them each individually with a call to
cogl_matrix_transfom.
This reverts commit 4cfe90bde2.
GLSL 1.00 on GLES doesn't support unsized arrays so the whole idea
can't work.
Conflicts:
clutter/cogl/cogl/cogl-pipeline-glsl.c
The check for whether we can reuse a program we've already generated
was only being done if the pipeline already had a
glsl_program_state. When there is no glsl_program_state it then looks
for the nearest ancestor it can share the program with. It then
wasn't checking whether that ancestor already had a GL program so it
would start generating the source again. It wouldn't however compile
that source again because _cogl_pipeline_backend_glsl_end does check
whether there is already a program. This patch moves the check until
after it has found the glsl_program_state, whether or not it was found
from an ancestor or as its own state.
Under GLES2 we were defining the cogl_tex_coord_in varying as an array
with a size determined by the number of texture coordinate arrays
enabled whenever the program is used. This meant that we may have to
regenerate the shader with a different size if the shader is used with
more texture coord arrays later. However in OpenGL the equivalent
builtin varying gl_TexCoord is simply defined as:
varying vec4 gl_TexCoord[]; /* <-- no size */
GLSL is documented that if you declare an array with no size then you
can only access it with a constant index and the size of the array
will be determined by the highest index used. If you want to access it
with a non-constant expression you need to redeclare the array
yourself with a size.
We can replicate the same behaviour in our Cogl shaders by instead
declaring the cogl_tex_coord_in with no size. That way we don't have
to pass around the number of tex coord attributes enabled when we
flush a material. It also means that CoglShader can go back to
directly uploading the source string to GL when cogl_shader_source is
called so that we don't have to keep a copy of it around.
If the user wants to access cogl_tex_coord_in with a non-constant
index then they can simply redeclare the array themself. Hopefully
developers will expect to have to do this if they are accustomed to
the gl_TexCoord array.
When compiling for GLES2, the codegen is affected by state other than
the layers. That means when we find an authority for the codegen state
we can't directly look at authority->n_layers to determine the number
of layers because it isn't necessarily the layer state authority. This
patch changes it to use cogl_pipeline_get_n_layers instead. Once we
have two authorities that differ in codegen state we then compare all
of the layers to decide if they would affect codegen. However it was
ignoring the fact that the authorities might also differ by the other
codegen state. This path also adds an extra check for whether
_cogl_pipeline_compare_differences contains any codegen bits other
than COGL_PIPELINE_STATE_LAYERS.
When determining if a layer would require a different shader to be
generated it needs to check a certain set of state changes and it
needs to check whether the texture target is different. However it was
checking whether texture texture was different only if the other state
was also different which doesn't make any sense. It also only checked
the texture difference if that was the only state change which meant
that effectively the code was impossible to reach. Now it does the
texture target check indepent of the other state changes.
The fixed pipeline backend wasn't correctly flushing the combine
constant because it was using the wrong flag to determine if the
combine constant has changed since the last flushed material.
When enabling a unit that was disabled from a previous flush pipeline
it was forgetting to rebind the right texture unit so it wouldn't
work. This was causing the redhand to disappear when using the fixed
function backend in test-cogl-multitexture if anything else is added
to the scene.
For shader generation backends we don't need to worry about changes to
the texture object and changing the user matrix. The missing user
matrix flag was causing test-cogl-multitexture to regenerate the
shader every frame.
Having ctx here produces a warning on GLES. However it's needed for Big
GL as we have at the top of the file:
#ifdef HAVE_COGL_GL
#define glClientActiveTexture ctx->drv.pf_glClientActiveTexture
#endif
This reverts commit 27a3a2056a.
That what happens when you test things only with 2 configure options
instead of 3. The 2 tested compile, the third one breaks. Another good
catch for the eglx bot!
With glib 2.28, we'll be able to have one GSource per device manager
with child sources for earch device. Make a note to update the code
in a few months.
An array is used to translate the button to its mask. Clutter defines
the masks for button 1 to 5 but we report BTN_LEFT..BTN_TASK ie
0x110..0x117. We need to pad the array for the translation not to access
random data for buttons between 0x115 and 0x117.
Discarding the event without any warning when the device has no
associated stage makes it hard to find the bug for people implementing
new event backends. We should really warn for that abnormal condition in
_clutter_input_device_update().
We know support EV_REL events comming from evdev devices. This addition
is pretty straigthforward, it adds a x,y per GSource listening to a
evdev device, updates from EL_REL (relative) events and craft new
ClutterMotionEvents. As for buttons, BTN_LEFT..BTN_TASK are translated
to ClutterButtonEvents with 1..8 as button number.
Even with udev, the read fails before udev has a chance to signal the
change. Hence (and to handle errors gracefully anyway), let's remove the
device from the device manager in case of a read() error.
The device manager now fully owns the GSources corresponding to the
devices it manages. This will allow not only to remove the source when
udev signals a device removal but also handle read() errors gracefully
by removing the faulty device from the manager.
Just connect to the GUdevClient "uevent" signal and deals with
"add"/"remove" commands. This drives the installation/removal of
GSource to listen to the device.
Let's use the sysfs path of the device to make sure we only load evdev
device, not legacy mousedev ones for instance. We rely on the sysfs
API/ABI guarantees and look for devices finishing by /input%d/event%d.
This backend is a event backend that can be enabled for EGL (for now).
It uses udev (gudev) to query input devices on a linux system, listens to
keyboard events from input devices and xkbcommon to translate raw key
codes into key keysyms.
This commit only supports key events, more to follow.
Looking at what the X11 backend does: the unicode value is being
translated to the unicode codepoint of the symbol if possible. Let's do
the same then.
Before that, key events for say KEY_Right (0xff53) had the unicode_value
set to the keysym, which meant "This key event is actually printable and
is Unicode codepoint is 0xff53", which lead to interesting results.
The wayland client code has support for translating raw linux input
device key codes coming from the wayland compositor into key symbols
thanks to libxkbcommon.
A backend directly listening to linux input devices (called evdev, just
like the Xorg one) could use exactly the same code for the translation,
so abstract it a bit in a separate file.
In 6246c2bd6 I moved the code to add the boilerplate to a shader to a
separate function and also made it so that the common boilerplate is
added as a separate string to glShaderSource. However I didn't notice
that the #define for the vertex and fragment shaders already includes
the common part so it was being added twice. Mesa seems to accept this
but it was causing problems on the IMG driver because COGL_VERSION was
defined twice.
Don't calculate an extra layout in clutter_text_get_preferred_height for
single-line strings, when it's unnecessary. There's no need to set the
width of a layout when in single-line mode, as wrapping will not happen.
Previously when the shader effect is used with a new actor it would
end up throwing away the old program. I don't think this is neccessary
and it means if you use an effect to temporarily bind to an actor then
it will recompile the shader whenever it is applied.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2454
When a new actor is set for ClutterOffscreenEffect it would throw away
the old material. I don't think there is anything specifically tied to
the actor in the material so throwing away just loses Cogl's cached
state about the material. This ends up relinking the shader every time
a new actor is set in ClutterShaderEffect.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2454
Do not use the compiler to zero the first field of the GValue member,
since it's apparently non-portable. As we're allocating memory anyway we
can let the slice allocator do the zero-ing for us.
Mentioned in: http://bugzilla.clutter-project.org/show_bug.cgi?id=2455
Before commit 49898d43 CoglPipeline would compare whether a pipeline
layer's texture is equal by fetching the underlying GL handle. I
changed that so that it would only compare the CoglHandles because
that commit removes the GL handle texture overrides and sliced
textures instead log the underlying primitive texture. However I
forgot that the primitives don't always use
_cogl_texture_foreach_sub_texture_in_region when the quad fits within
the single texture so it won't use a texture override. This meant that
atlas textures and sub textures get logged with the atlas handle so
the comparison still needs to be done using the GL handles. It might
be nice to add a CoglTexture virtual to get the underlying primitive
texture instead to avoid having the pipeline poke around with GL
handles.
If we have to make override changes to the user's source material to
handle cogl_polygon then we need to make sure we unref the override
material at the end.
Previously we used the layers->backend_priv[] members to determine when
to notify backends about layer changes, but it entirely up to the
backends if they want to associate private state with layers, even
though they may still be interested in layer change notifications (they
may associate layer related state with the owner pipeline).
We now make the observation that in
_cogl_pipeline_backend_layer_change_notify we should be able to assume
there can only be one backend currently associated with the layer
because we wouldn't allow changes to a layer with multiple dependants.
This means we can determine the backend to notify by looking at the
owner pipeline instead.
Previously whenever the size of the FBO changes it would create a new
material and attach the texture to it. This is not good for Cogl
because it throws away any cached state for the material. In
test-rotate the size of the FBO changes constantly so it effectively
uses a new material every paint. For shader effects this also ends up
relinking the shader every paint because the linked programs are part
of the material state.
The features_cached member of CoglContext is intended to mark when
we've calculated the features so that we know if they are ready in
cogl_get_features. However we always intialize the features while
creating the context so features_cached will never be FALSE so it's
not useful. We also had the odd behaviour that the COGL_DEBUG feature
overrides were only applied in the first call to
cogl_get_features. However there are other functions that use the
feature flags such as cogl_features_available that don't use this
function so in some cases the feature flags will be interpreted before
the overrides are applied. This patch makes it always initialize the
features and apply the overrides immediately while creating the
context. This fixes a problem with COGL_DEBUG=disable-arbfp where the
first material flushed is done before any call to cogl_get_features so
it may still use ARBfp.
Now that the GLSL backend can generate code it can effectively handle
any pipeline unless there is an ARBfp program. However with current
open source GL drivers the ARBfp compiler is more stable so it makes
sense to prefer ARBfp when possible. The GLSL backend is also lower
than the fixed function backend on the assumption that any driver that
supports GLSL will also support ARBfp so it's quicker to try the fixed
function backend next.
This adds COGL_DEBUG=disable-fixed to disable the fixed function
pipeline backend. This is needed to test the GLSL shader generation
because otherwise the fixed function backend would always override it.
We don't want to use gl_PointCoord to implement point sprites on big
GL because in that case we already use glTexEnv(GL_COORD_REPLACE) to
replace the texture coords with the point sprite coords. Although GL
also supports the gl_PointCoord variable, it requires GLSL 1.2 which
would mean we would have to declare the GLSL version and check for
it. We continue to use gl_PointCoord for GLES2 because it has no
glTexEnv function.
The GLES2 wrapper no longer needs to generate any fragment shader
state because the GLSL pipeline backend will always give the wrapper a
custom fragment shader. This simplifies a lot of the state comparison
done by the wrapper. The fog generation is also removed even though
it's actually part of the vertex shader because only the fixed
function pipeline backend actually calls the fog functions so it would
be disabled when using any of the other backends anyway. We can fix
this when the two shader backends also start generating vertex
shaders.
GLES2 has no glAlphaFunc function so we need to simulate the behaviour
in the fragment shader. The alpha test function is simulated with an
if-statement and a discard statement. The reference value is stored as
a uniform.
Previously the flag to mark the differences for the alpha test
function and reference value were conflated into one. However this is
awkward when generating shader code to simulate the alpha testing for
GLES 2 because in that case changing the function would need a
different program but changing the reference value just requires
updating a uniform. This patch makes the function and reference have
their own state flags.
The GLSL shader generation supports layer combine constants so there's
no need to disable it for GLES2. It looks like there was also code for
it in the GLES2 wrapper so I'm not sure why it was disabled in the
first place.
The GLSL pipeline backend can now generate code to represent the
pipeline state in a similar way to the ARBfp backend. Most of the code
for this is taken from the GLES 2 wrapper.
_cogl_shader_compile_real had some code to create a set of strings to
combine the boilerplate code with a shader before calling
glShaderSource. This has now been moved to its own internal function
so that it could be used from the GLSL pipeline backend as well.
