Since commit eb9cd3857d we initialize the allocation of ClutterActors to
an UNINITIALIZED ClutterActorBox. We do that to ensure the actor even
emits notify::allocation in case it got a new valid allocation of
0,0,0,0.
Now there's still the case where an actor gets removed from the
scenegraph and added again to a different parent, in this case we still
don't emit notify::allocation right now in case the new allocation
equals the old one. There's two good reasons to do so though:
1) To Clutter, there's no difference between a newly created actor and
an actor which got removed from the scenegraph, it's not consistent to
always notify the allocation property in the former situation, but not
always notify it in the latter situation.
2) When an allocation changes, Clutter notifies the subtree of that
actor about an absolute geometry change (see the call to
transform_changed() in clutter_actor_set_allocation_internal()). Now
when an actor gets reparented, obviously the absolute geometry might
change, so to make sure transform_changed() is always called in that
case we need to make sure an allocation change happens.
So simply reset the allocation property of the actor to an UNINITIALIZED
ClutterActorBox as soon as it gets unrealized.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1498
We introduced the absolute_origin_changed flag when preparing for the
removal of ClutterAllocationFlags in commit dc8e5c7f8b. Turns out in the
mean-time commit df4eeff6f2 happened, which renders the whole
absolute_origin_changed flag moot.
That's because we now notify the whole subtree about the absolute origin
change by calling transform_changed() when the allocation of an actor
changes. transform_changed() traverses the subtree and calls
absolute_geometry_changed() on every actor immediately, which renders
the whole propagation of the absolute_origin_changed flag obsolete.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1498
Since we now moved the queuing of relayouts into the mapping and
unmapping functions, we no longer need to do it when adding or removing
a child, that's because removing a child always unmaps the child, and
adding it to a stage (if it's visible) will map it.
So remove those calls to queue_relayout() since they're no longer
needed.
With the above we no longer queue a relayout in
clutter_actor_add_child_internal(), that means there's one place where
we need to explicitely queue relayouts now: That's when using the
set_child_at_index/above/below() APIs, those are special because they
avoid unmapping and mapping of actors and would now no longer get a
relayout.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
In theory there's no big difference between only handling mapped actors
vs only handling visible actors in clutter_actor_allocate(): The
function is called recursively starting with an actor that is attached
to a stage, so it should only be called on mapped actors anyway.
The behavior of skipping hidden actors was introduced as an optimization
with commit 0eab73dc. Since the last commit, we handle
enable_paint_unmapped a bit better and don't do unnecessary work when
mapping or unmapping, so we can now be a bit stricter enforcing our
invariants and only allow mapped actors in clutter_actor_allocate().
We need to exclude toplevel actors from this check since the stage has a
very different mapped state than normal actors, depending on the
mappedness of the x11 window. Also we need to make an exception for
clones (of course...): Those need their source actor to have an
allocation, which means they might try to force-allocate it, and in that
case we shouldn't bail out of clutter_actor_allocate().
Also moving the clutter_actor_queue_relayout() call from
clutter_actor_real_show() to clutter_actor_real_map() seems to fix a bug
where we don't queue redraws/relayouts on children when a parent gets
shown.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2973https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
We currently support only one case where an actor can get mapped or
unmapped during painting, that is using
_clutter_actor_enable_paint_unmapped() (although we could arguably do a
better job explicitely forbidding it in other cases). This function is
called when painting ClutterClone or MetaWindowActors during
screensharing. It temporarily (fake) realizes and maps the actor and all
its children so it can get painted.
Now a problem will appear when we'll start coupling layout and the
mapped state of actors more closely with the next commit: Since
enable_paint_unmapped() is meant to be enabled and disabled during every
clone paint, we also notify the "mapped" property twice on every clone
paint. That means with the next commit we would queue a relayout for the
source actor on every clone paint.
To avoid this unnecessary work, check whether we're being painted while
unmapped using the new unmapped_paint_branch_counter. Then avoid queuing
relayouts or invalidating paint volumes in that case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Add new private API to ClutterActor, returning TRUE in case the actor is
being painted while unmapped. This is useful for implementations of the
paint() vfunc or for signal handlers of the "notify::mapped" signal.
Use this API in CallyActor to properly detect "notify::mapped" emissions
while painting unmapped, this fixes detecting the case where
painting-unmapped is used for screencasting.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Just like the existing in_cloned_branch counter, add a property which
tracks whether the actor is part of a subtree that's being painted while
unmapped. This is going to be useful for a few things, for example
changing the clutter_actor_is_in_clone_paint() API to use
enable_paint_unmapped instead of in_clone_paint.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
clutter_actor_queue_relayout() detects whether a parent has the
NO_LAYOUT flag set by itself and then queues a shallow relayout for us.
There's no need to duplicate that logic when showing actors, so simply
call clutter_actor_queue_relayout() and let that handle it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
Apparently clutter_paint_volume_union() has problems building the union
of two paint volumes in eye coordinates, that's probably because of the
negative coordinates that come into play there.
Circumvent that by making even more use of Graphene and letting it take
care of computing the union. We do that by creating two graphene_box_t's
from the axis-aligned paint volumes and intersecting those boxes, then
setting our vertices to the new min and max points of the resulting box.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1507
Add a helper function to determine if a seat has a (physical)
touchscreen associated with it.
Currently src/backends/meta-backend.c has a private version of this
(check_has_physical_touchscreen) and further patches in this patch-set
need the same functionality. So add a generic helper for this to
avoid code duplication.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1506
_cogl_util_get_eye_planes_for_screen_poly() is quite a complicated beast. Ever
since Clutter became a compositor toolkit, and specially after we switched to
graphene_frustum_t on paint volumes, we can brutally simplify this function.
The new code assumes camera is at (0, 0, 0) at world coordinates (i.e. before
applying the projection). We also consider that the redraw clip are at stage
coordinates. That means that converting the clip rectangle to world rectangle
is simply a matter of projecting the corresponding vertices using the "view"
matrix. Furthermore, we only need to project the top-left, and bottom-right
vertices, since top-right and bottom-left can be derived from those two.
The frustum setup still uses triplets of vertices to setup the planes, except
now the first vertex is always the camera (hardcoded to 0, 0, 0), and the other
two vertices are the projected clip rectangle vertices.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
The redraw clip region may contain multiple clip rectangles. We currently
only use the extents of this region, but having multiple frusta for each
rectangle is a better alternative, and will allow us to remove the extra
projection we currently do.
Make the clip frustum an array, with multiple frusta.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
The clip planes / frustum are contextual to painting. In the past, for
the lack of a better place, it was added to ClutterStage, but now we
have an appropriate home for such data: ClutterPaintContext.
Move the frustum to the paint context.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
While refactoring the clipping planes / frustum code, it became more and
more evident that we do not need to update them while picking. Picking
nowadays goes through a completely different code path, that does not
rely on paint volume culling.
While it might be interesting to eventually also cull out based on paint
volumes, it certainly won't go through the painting code anymore.
Remove setting up the view when picking, and rename functions appropriatedly.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Culling paint volumes don't give this level of detail anymore, and in
fact knowing whether it was partially or fully in was only being used
in a debug path. For the purposes of culling, it doesn't matter if a
given actor is partially or completely inside the frustum; either way,
it must be painted.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Instead of 4 planes, use a graphene_frustum_t to store the clipping
planes.
The cautious reviewer might noticed that we are now setting up 6
planes: the 4 planes we were doing before, plus 2 extra planes in
the Z axis. These extra planes simulate an "infinite" Z far, and
an "on-camera" Z near.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
ClutterStage defines the 8 vertices of a frustum:
4 ----------------------------- 5
| \ / |
| \ / |
| 0 --------------------- 1 |
| | | |
| | | |
| 3 --------------------- 2 |
| / \ |
| / \ |
7 ----------------------------- 6
Then, it uses triplets of vertices to create each clipping plane.
It only sets up 4 planes (it doesn't clip based on depth), defined
by the following vertices:
* 0 - 4 - 5
* 1 - 5 - 6
* 2 - 6 - 7
* 0 - 7 - 4
The first 3 triplets are selected using the for-loop. However, the
last triplet is different, and is done out of the loop. It could
have been made simpler by using the "3 - 7 - 4" triplet.
Simplify the current code by using the suggested triplet, calculated
inside the for-loop.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Instead of our own implementation that upscales, then downscales back,
use graphene_matrix_inverse() directly. This is possible after switching
to a z-near value that doesn't have problems with float precision.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
Picking is specially sensitive for float precision, and tests can
easily fail when something changes, even if ever so slightly. A
simple way to workaround this is by adjusting the projected points
using the same procedure described at 67cc60cbda.
Round projected points for picking to 256ths.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1489
A first step towards abandoning the CoglObject type system: convert
CoglFramebuffer, CoglOffscreen and CoglOnscreen into GObjects.
CoglFramebuffer is turned into an abstract GObject, while the two others
are currently final. The "winsys" and "platform" are still sprinkled
'void *' in the the non-abstract type instances however.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1496
The timestamp sent with _NET_WM_FRAME_DRAWN should be in "high
resolution X server timestamps", meaning they should have the same scope
as the built in X11 32 bit unsigned integer timestamps, i.e. overflow at
the same time.
This was not done correctly when mutter had determined the X server used
the monotonic clock, where it'd just forward the monotonic clock,
confusing any client using _NET_WM_FRAME_DRAWN and friends.
Fix this by 1) splitting the timestamp conversiot into an X11 case and a
display server case, where the display server case simply clamps the
monotonic clock, as it is assumed Xwayland is always usign the monotonic
clock, and 2) if we're a X11 compositing manager, if the X server is
using the monotonic clock, apply the same semantics as the display
server case and always just clamp, or if not, calculate the offset every
10 seconds, and offset the monotonic clock timestamp with the calculated
X server timestamp offset.
This fixes an issue that would occur if mutter (or rather GNOME Shell)
would have been started before a X11 timestamp overflow, after the
overflow happened. In this case, GTK3 clients would get unclamped
timestamps, and get very confused, resulting in frames queued several
weeks into the future.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1494
Keeping track of the projected position is costly, and adds quite some complexity
to ClutterOffscreenEffect.pre_paint(). As far as research goes, there's not a
single consumer of this function that uses the position for anything - only size
is used.
Remove clutter_offscreen_effect_get_target_rect(), and drop the annoying position
field from ClutterOffscreenEffect as well. This allows us to stop projecting the
position on pre-paint, and simplify things.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1474
ClutterPipelineNode will be used by GNOME Shell in the future.
Fortunately for us, CoglPipeline is already usable from GJS,
so we don't need to skip the constructor for the pipeline node.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1474
Move unreffing the framebuffer to ClutterOffscreenEffect.pre_paint().
This will allow us to properly chain up ClutterOffscreenEffect.paint()
and not reimplement exactly what ClutterEffect does by default.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1474
