When validating a new GValue against the ClutterParamSpecUnits, we issue
a warning when the units do not match with both the new value and the
unit we expect to have. Unfortunately we were printing the unit of the
new value twice and not the unit of the ParamSpec.
http://bugzilla.openedhand.com/show_bug.cgi?id=1846
This is really useful when trying to animate GTypes that haven't
registered any progress function. Instead of silently not working it
will warn the developer.
http://bugzilla.openedhand.com/show_bug.cgi?id=1845
To be able to animate CLUTTER_TYPE_UNITS properties we need to register
the GType and its progress function against the ClutterInterval code.
The two ClutterUnits defining the interval can use different units, the
resulting unit will always be in pixels, so calculating a progress
between 10px and 4cm is valid.
http://bugzilla.openedhand.com/show_bug.cgi?id=1844
When computing the pixels value of a ClutterUnits value we should
be caching the value to avoid recomputing for every call of
clutter_units_to_pixels(). We already have a flag telling us to
return the cached value, but we miss the mechanism to evict the
cache whenever the Backend settings affecting the conversion, that
is default font and resolution, change.
In order to implement the eviction we can use a "serial"; the
Backend will have an internal serial field which we retrieve and
put inside the ClutterUnits structure (we split one of the two
64 bit padding fields into two 32 bit fields to maintain ABI); every
time we call clutter_units_to_pixels() we compare the units serial
with that of the Backend; if they match and pixels_set is set to
TRUE then we just return the stored pixels value. If the serials
do not match then we unset the pixels_set flag and recompute the
pixels value.
We can verify this by adding a simple test unit checking that
by changing the resolution of ClutterBackend we get different
pixel values for 1 em.
http://bugzilla.openedhand.com/show_bug.cgi?id=1843
Input Methods require to be able to set a "pre-edit string", that is
a string that it's just displayed into the Text actor without being
committed to the actor's buffer. The string might require custom Pango
attributes, and an update of the cursor position.
Casting a float to int to truncate it before assigning the value
to a float again is wrong. We should use ceilf() instead which
does what we want to achieve (rounding up the size to avoid
sub-pixel positioning of children).
* Use g_list_foreach() instead of iterating over the list inside
the destruction sequence, since we are causing the widgets to be
implicitly removed from the list via the destroy() call.
* Use g_signal_connect_swapped() and spare us from a callback.
FlowLayout should compute the correct height for the assigned width when
in horizontal flow, and the correct width for the assigned height when
in vertical flow. This means pre-computing the number of lines inside
the get_preferred_width() and get_preferred_height(). We can then cache
the computed column width and row height, cache them inside the layout
and then use them when allocating the children.
When changing the orientation of a FlowLayout, the associated
container should also change its request mode. A horizontally
flowing layout has a height depending on the width, since it
will reflow vertically; similarly, a vertically reflowing layout
will have a width depending on the height.
The :wrap property is not implemented, and mostly useless: the
FlowLayout is a reflowing grid. This means that if it receives
less than the preferred width or height in the flow direction
then it should always reflow.
Use the column and row size to align each child; with :homogeneous
set to TRUE, or with children with the same size, the FlowLayout
will behave like a reflowing grid.
FlowLayout is a layout manager that arranges its children in a
reflowing line; the orientation controls the major axis for the
layout: horizontal, for reflow on the Y axis, and vertical, for
reflow on the X axis.
The BinLayout should store a pointer to the Container that it is
using it as the layout manager.
This allows us to fix the API and drop the additional Container
arguments from set_alignment() and get_alignment().
This also allows us to add a ClutterBinLayout::add() method which
adds an actor and sets the alignment policies without dealing with
variadic arguments functions and GValue (de)marshalling.
Use the LayoutManager API to set a back pointer to the Box actor
inside the LayoutManager used by the box.
This also allows us to replace the LayoutManager on a Box, since
the LayoutManager will be able to replace all the metadata if
needed.
The LayoutManager implementation might opt to take a back pointer
to the Container that is using the layout instance; this allows
direct access to the container itself from within the implementation.
The ClutterBox::add method is a simple wrapper around the Container
add_actor() method and the LayoutManager layout properties API. It
allows adding an actor to a Box and setting the layout properties in
one call.
If the LayoutManager used by the Box does not support layout properties
then the add() method short-circuits out.
Along with the varargs version of the method there's also a vector-based
variant, for language bindings to use.
Instead of overloading ClutterChildMeta with both container and layout
metadata and delegate to every LayoutManager implementation to keep a
backpointer to the layout manager instance, we can simply subclass
ChildMeta into LayoutMeta and presto! everything works out pretty well
for everyone.
Each actor managed by a BinLayout policy should reside inside its
own "layer", with horizontal and vertical alignment. The :x-align
and :y-align properties of the BinLayout are the default alignment
policies, which are copied to each new "layer" when it is created.
The set_alignment() and get_alignment() methods of BinLayout can
be changed to operate on a specific "layer".
The whole machinery uses the new ChildMeta support inside the
LayoutManager base abstract class.
The ChildMeta object is a storage for child-container properties,
that is properties that exist only when an actor is inside a specific
container. The LayoutManager delegate class should also have
layout-specific properties -- so, for this job, we can "recycle"
ChildMeta as the storage.
Emit the ::layout-changed when the BinLayout alignment policies change.
This will result in a queue_relayout() on the containers using the
BinLayout layout manager.
* Use ::layout-changed to queue a relayout when the layout changes
* Destroy the Box children when destroying the Box
* Allow getting the layout manager from the Box
If a sub-class of LayoutManager wishes to implement a parametrized
layout policy it also needs a way to notify the container using the
layout manager that the layout has changed. We cannot do it directly
and automatically from the LayoutManager because a) it has no back
link to the actor that it is using it and b) it can be attached to
multiple actors.
This is a job for <cue raising dramatic music> signals!
By adding ClutterLayoutManager::layout-changed (and its relative
emitted function) we can notify actors using the layout manager that
the layout parameters have been changed, and thus they should queue
a relayout.
A BinLayout is a simple layout manager that allocates a single cell,
providing alignment on both the horizontal and vertical axis.
If the container associated to the BinLayout has more than one child,
the preferred size returned by the layout manager will be as big as
the maximum of the children preferred sizes; the allocation will be
applied to all children - but it will still depend on each child
preferred size and the BinLayout horizontal and vertical alignment
properties.
The supported alignment properties are:
* center: align the child by centering it
* start: align the child at the top or left border of the layout
* end: align the child at the bottom or right border of the layout
* fill: expand the child to fill the size of the layout
* fixed: let the child position itself
A layout manager instance makes only sense if it's owned by a
container. For this reason, it should have a floating reference
instead of a full reference on construction; this allows constructing
Boxes like:
box = clutter_box_new (clutter_fixed_layout_new ());
without leaking the layout manager instance.
The LayoutManager class is an abstract proxy for the size requesition
and size allocation process in ClutterActor.
A ClutterLayoutManager sub-class must implement get_preferred_width(),
get_preferred_height() and allocate(); a ClutterContainer using the
LayoutManager API will then proxy the corresponding Actor virtual
functions to the LayoutManager instance. This allows having a generic
"blank" ClutterActor sub-class, implementing the ClutterContainer
interface, which leaves only the layout management implementation to
the application developers.
The rules to create signal marshallers and enumeration GTypes are
usually copied and pasted all over different projects, though they
are pretty generic and, given a little bit of parametrization, can
be put in separate Makefile.am files and included whenever needed.
The set_default_stage() method of StageManager should not be used
by application code; technically, nothing in Clutter uses it, and
StageManager's API is not considered public anyway.
The IN_DESTRUCTION flag is set around the unrealization and disposal of
the actor in clutter_actor_destroy() but is never unset (it's set twice
instead).
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Currently, setting the :text property has the side-effect of
setting the :use-markup property to FALSE. This prevents
constructing a Text actor, or setting its properties, like:
g_object_set (text,
"use-markup", TRUE,
"text", some_string,
NULL);
as the ordering becomes important. Unfortunately, the ordering
of the properties cannot be enforced with ClutterScript or
with language bindings.
The documentation of the clutter_text_set_text() method should
be expanded to properly specify that the set_text() method will
change the :use-markup property to FALSE as a side effect.
Transform functions allow the use of g_value_transform() to cast
GValues. It's very handy to have casts to and from G_TYPE_STRING as it
allows generic serialization and parsing of GTypes.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Current parsing of units has a number of shortcomings:
* a number followed by trailing space (without any unit specified) was
not recognized,
* "5 emeralds" was parsed as 5em,
* the way we parse the digits after the separator makes us lose
precision for no good reason (5.0 is parsed as 5.00010014...f which
makes g_assert_cmpfloat() fail)
Let's define a stricter grammar we can recognize and try to do so. The
description is in EBNF form, removing the optional <> which is a pain
when having to write DocBook, and using '' for the terminal symbols.
Last step, add more ClutterUnits unit test to get a better coverage of
the grammar we want to parse.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
Parse #rgb and #rrggbb in addition to forms with the alpha channel
specified. This allows conversion of colour strings from documents such as
CSS where the alpha channel is not specified when using '#' notation.
This patch also adds the relevant conformance test.
Parse #rgb and #rrggbb in addition to forms with the alpha channel
specified. This allows conversion of colour strings from documents such as
CSS where the alpha channel is not specified when using '#' notation.
gdk is an optional clutter dependency, so the pick buffer debugging option
needs some guards so we don't break, for example, the OSX builds. This also
adds a comment for the bit fiddling done on the pick colors used to ensure
the pick colors are more distinguished while debugging. (we swap the
nibbles of each color component so that pick buffers don't just look black.)
ClutterGroup previously calculated the size as the distance from the
left edge of the leftmost child to the right edge of the rightmost
child except if there were any chidren left of the origin then the
left edge would be zero.
However the group is always allocated its size relative to its
origin so if all of the children are to the right of the origin then
the preferred size would not be large enough to reach the rightmost
child.
origin
┼──────────┐
│Group │
│ ┌────────┼─┐
│ │Child │ │
│ │ │ │
└─┼────────┘ │
│ │
└──────────┘
group size
╟──────────╢
This patch makes it so the size is always just the rightmost edge.
origin
┼────────────┐
│Group │
│ ┌──────────┤
│ │Child │
│ │ │
│ │ │
│ │ │
└─┴──────────┘
group size
╟────────────╢
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1825
Since the Great Rework of ClutterUnits, functions have been using
'units' not 'unit' in their name. clutter_value_get_unit() is a left
over from a dark age, its declaration and documentation have been
updated but not the symbol itself.
Instead of having an assertion failure with a message of dubious
usefulness, we should probably use a more verbose warning explaining
what is the problem and what might be the cause.
The user-initiated resize is conflicting with the allocated size. This
happens because we change the size of the stage's X Window behind the
back of the size allocation machinery.
Instead, we should change the size of the actor whenever we receive a
ConfigureNotify event to reflect the new size of the actor.
We force the redraw before mapping, in the hope that when a composited
window manager maps the window it will have its contents ready; that is
not going to work: the solution for this problem requires the implementation
of a protocol for compositors, and not a hack.
Moreover, painting before mapping will cause a paint with the wrong
GL viewport size, which is the wrong thing to do on GLX.
When not building a debug build the compiler was warning about empty
else clauses with no braces due to code like:
if (blah)
do_foo();
else
COGL_NOTE (DRAW, "a-wibble");
This simply ensures that even for non debug builds COGL_NOTE will expand to
a single statement.
glVertexPointer expects positions with 2, 3 or 4 components, glColorPointer
expects colors with 3 or 4 components and glNormalPointer expects normals
with three components so when adding vertex buffer atributes with the names
"gl_Vertex", "gl_Color" or "gl_Normal" we assert these constraints and print
an explanation to the developer if not met.
This also fixes the previosly incorrect constraint that gl_Normal attributes
must have n_components == 1; thanks to Cat Sidhe for reporting this:
Bug: http://bugzilla.openedhand.com/show_bug.cgi?id=1819
Now if you export CLUTTER_DEBUG=dump-pick-buffers clutter will write out a
png, e.g. pick-buffer-00000.png, each time _clutter_to_pick() is called.
It's a rather crude way to debug the picking (realtime visualization in a
second stage would probably be nicer) but it we've used this approach
successfully numerous times when debugging Clutter picking issues so it
makes sense to have a debug option for it.
It looks like the intention was to duplicate an XVisualInfo in such a way
that the pointer could be returned and then later freed using XFree. But
Xalloc isn't an Xlib counterpart to XFree; Xlib doesn't provide a general
purpose malloc wrapper afik. By shuffling things about a bit, it was
possible to avoid the need for this hack.
By default, float * is considered as an out argument by gobject
introspection which is wrong for quite a few Cogl symbols. Start adding
annotations to fix that for the ones in the "Primitives" gtk-doc
section.
In the default implementation of container::destroy_child_meta Set child
meta qdata to NULL on the child and not the container, since the child
is the object that owns the data.
The lifetime of the journal VBO is entirely within the scope of the
cogl_journal_flush function so there is no need to store it globally
in the Cogl context. Instead, upload_vertices_to_vbo just returns the
new VBO. cogl_journal_flush stores this in a local variable and
destroys it before returning.
This also fixes an assertion when using the GLES backend which was
caused by nothing initialising the journal_vbo variable.
If the system clock rolls back between two frames then we need
to account for the change, to avoid stopping the timeline.
The best option, since a roll back can be any arbitrary amount
of milliseconds, is to skip a frame.
Fixes bug:
http://bugzilla.moblin.org/show_bug.cgi?id=3839
The framebuffer_object spec isn't clear in defining whether attaching a
texture as a renderbuffer with mipmap filtering enabled while the mipmaps
have not been uploaded should result in an incomplete framebuffer object.
(different drivers make different decisions)
To avoid an error with drivers that do consider this a problem we explicitly
set non mipmapped filters before calling glCheckFramebufferStatusEXT. The
filters will later be reset when the texture is actually used for rendering
according to the filters set on the corresponding CoglMaterial.
Since an actor can only be parented to one container we don't need
the extra complications of maintaining a list of ChildMeta objects
attached to an actor in the default implementation of the Container
interface.
Instead of using ClutterActor for the base class of the Stage
implementation we should extend the StageWindow interface with
the required bits (geometry, realization) and use a simple object
class.
This require a wee bit of changes across Backend, Stage and
StageWindow, even though it's mostly re-shuffling.
First of all, StageWindow should get new virtual functions:
* geometry:
- resize()
- get_geometry()
* realization
- realize()
- unrealize()
This covers all the bits that we use from ClutterActor currently
inside the stage implementations.
The ClutterBackend::create_stage() virtual function should create
a StageWindow, and not an Actor (it should always have been; the
fact that it returned an Actor was a leak of the black magic going
on underneath). Since we never guaranteed ABI compatibility for
the Backend class, this is not a problem.
Internally to ClutterStage we can finally drop the shenanigans of
setting/unsetting actor flags on the implementation: if the realization
succeeds, for instance, we set the REALIZED flag on the Stage and
we're done.
As an initial proof of concept, the X11 and GLX stage implementations
have been ported to the New World Order(tm) and show no regressions.
The old code checked whether the property began with 'signal-' and
then checked for 'signal-swapped' and 'signal-after'. This prevented
you from animating a property called for example 'signal-strength'.
The check for the prefix is now in a separate function which also adds
a 'signal-swapped-after' prefix for completeness.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1798
The blend string compiler checks that the syntax of a function name is
[A-Za-z_]*, preventing the use of DOT3_RGB[A].
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The column names are optional - ClutterModel will use the GType name
if there is no user-specified column name. Hence, the ::finalize vfunc
should not try to free an empty column names vector.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1790
The default floating point type for JSON is double precision; this means
that we need to conver to single precision when setting a property with
type G_TYPE_FLOAT.
Currently, to update a property inside an animation you have to
get the interval for that property and then call the set_final_value()
method.
We can provide a simpler, bind()-like method for the convenience of
the developers that just validates everything and then calls the
Interval.set_final_value().
Right now we just check for a NULL stage before calling glXMakeCurrent().
We can, though, get a valid stage without an implementation attached to
it while we are disposing a stage after a CLUTTER_DELETE event, since the
events processing is performed on a vblank-locked basis.
ClutterClone bases its preferred size on the preferred size of
the source actor, so it needs to invalid its cached preferred
size when the preferred size of the source actor changes.
In order for this to work, we need to have notification when
the size of the source actor changes, so add a ::queue-relayout
signal to ClutterActor.
Then connect to this from ClutterClone and queue a relayout
on the clone when a relayout is queued on the source.
http://bugzilla.openedhand.com/show_bug.cgi?id=1755
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
This reverts commit 3c47a3beb5.
Of course I remembered just after pushing the patch why we hadn't done
this before :-) If you look in the glsl spec:
http://www.khronos.org/registry/gles/specs/2.0/es_full_spec_2.0.24.pdf
Section 3.7.10 Texture Completeness and Non-Power-Of-Two Textures
you can see GLES 2.0 doesn't support mipmaps for npot textures.
There is possibly some way we could support this in Cogl but at least
it's not as simple as or-ing in the feature flag, sadly.
The core GLES2 API supports NPOT textures, i.e. there is no extension as for
OpenGL, so we now add COGL_FEATURE_TEXTURE_NPOT to the feature flags in
_cogl_features_init.
Thanks to Gordon Williams for spotting this.
Don't let stringify.sh write to the $srcdir + use the BUILT_SOURCES var in
Makefile.am so as to ensure all .c. and .h files get generated from their
corresponding .glsl files before building other targets.
If the timeline is running backwards, the completed signal handler should
set the final state from the interval's initial value.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When rendering a glyph run from a texture we were premultiplying the
colour once in display_list_render() and then again in
display_list_render_texture(). This was causing the color to come out
wrong. This fixes bug #1775.
Thanks to Pierre-Luc Beaudoin for reporting.
The wrong part of an expression was bracketed in the test to determine
when a new texture matrix needed to be loaded which resulted in the
first pass through _cogl_material_layer_flush_gl_sampler_state
not uploading any user matrix.
clutter_text_move_word_backward/forward() calls did not use the
start argument consistently. Also, clutter_text_move_word_forward()
bound check checked the wrong end.
Fixes#1765
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When a letter key is pressed with the control key held down one of
three things will happen :-
a) If the stage is embedded within a GtkClutterEmbed the unicode value
will be filled from gdk_keyval_to_unicode. This will be the same
value as if control was not pressed (so Ctrl+V will be 'v').
b) If the stage is not in a GtkClutterEmbed and Clutter is running on
the X11 backend then it will try to fill in the unicode value from
XLookupString. This *will* take into account the control so the
unicode value will represent a control character (Ctrl+V will be
'\x16').
c) Most other backends will not bother to fill in the unicode
value. Therefore clutter_keysym_to_unicode will be used which also
does not take into account the control key (so Ctrl+V will be 'v').
For cut and paste to work in Nbtk, the control keys need to bubble up
to the parent NbtkEntry container. This works fine for 'b' but not 'a'
and 'c'.
This patch makes ClutterText always allow the event to bubble if the
key is not handled by the binding pool and the control modifier is
down.
Ideally ClutterText would always get a unicode value that takes into
account the modifiers but this is probably best left up to the input
methods.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
g-ir-compiler currently opens the library for the .gir it is compiling;
to make that work we need to set LD_LIBRARY_PATH before running
g-ir-compiler to include .libs.
(I think this may have been working earlier because there was a
hack that substituted .so with .la and tried opening that; that
works for the incorrect libclutter-glx-1.0.so but not for the
correct libclutter-glx-1.0.so.0)
http://bugzilla.openedhand.com/show_bug.cgi?id=1771
Update the sed hack for the shared library to be more robust.
Remove the --shared-library command line argument from g-ir-scanner,
as no distribution will ever ship the .la files. This effectively
reverts commit 68f8a98cfb.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Use the --shared-library option to specify the shared object to link
against when compiling the typelib from the GIR data.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Following bug #1762, the syntax of g-ir-scanner was changed in
gobject-introspection, so Clutter does not build anymore with 0.6.4.
See the bugzilla bug:
http://bugzilla.gnome.org/show_bug.cgi?id=591669
GObject-Introspection now uses a different mechanism to extract the
SONAME when building the gir file and it needs the libtool archive as
option.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When dumping a ClutterUnits structure to a string we are using a bare
g_strdup_printf(), which unfortunately is locale dependant. So, for
instance, a type of CLUTTER_UNIT_EM and a value of 42 are stringified
as:
C: 42.00 em
en_GB 42.00 em
it_IT 42,00 em
fr_FR 42,00 em
This would not be a problem -- clutter_units_from_string() allows both
'.' and ',' as fractionary part delimiters. The test suite, on the
other hand, does not know that, and it checks for exact matches with
the C locale.
Calling setlocale(LC_ALL,"C") at the beginning of the conformance test
suite is not a good idea, because it would prevent external testing; and
it's a lame cop out from doing exactly what we have to do -- pick a format
and stick with it.
Like other platforms, languages and frameworks before us, we opt to
be less liberal in what we create; so, we choose to always stringify
ClutterUnits with fractionary parts using '.' as the delimiter.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1763
Clutter advertises itself on X11 as implementing the _NET_WM_PING protocol,
which is needed to be able to detect frozen applications; this allows us to
stop the destruction of the stage by blocking the CLUTTER_DELETE event and
wait for user feedback without the Window Manager thinking that the app has
gone unresponsive.
In order to implement the _NET_WM_PING protocol properly, though, we need
to add the _NET_WM_PID property on the Stage window, since the EWMH states:
[_NET_WM_PID] MAY be used by the Window Manager to kill windows which
do not respond to the _NET_WM_PING protocol.
Meaning that an unresponsive Clutter application might not be killable by
the window manager.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1748
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
* Do _not_ use CLUTTER_MAJORMINOR to define the installation path
for the headers; we must use CLUTTER_API_VERSION for that.
* Do not put the C compiler flags in the INCLUDES directive.
Bases on a patch by: Gary Ching-Pang Lin <glin@novell.com>
It is possible to unset the size of an actor specified with set_width()
and set_height() by using:
clutter_actor_set_size (actor, -1, -1);
Which works by unsetting the :min-*-set and the :natural-*-set properties.
Calling set_width(-1) and set_height(-1) separately, though, doesn't work
thus implicitly breaking the assumption that set_size() is nothing more
than set_width()+set_height(). This was obviously due to the face that
pre-1.0 set_width() and set_height() took an unsigned integer as an
argument.
ClutterActor parses positional and dimensional properties with a
custom deserializer. We need to:
- handle G_TYPE_INT64, the default integer type for JSON-GLib
- use G_TYPE_FLOAT for properties, since Actor switched to it
for the pixel-based ones
This makes ClutterScript work again.
The json-types.h header is found by the mere fact of it being
in the project; if we are compiling against the system JSON-GLib
this could be horribly out of date.
We need to use clutter-json.h, which will include the right
header for us.
JSON-GLib moved to a single include scheme, so we should only include
json-glib.h. If we use the internal copy it doesn't matter, since the
header does the right thing.
The clutter-script-parser.c does not have a copyright and license
notices; even though the LGPL is a per-project license and not a
per-file license, having those notices in every source file is a
good idea.
The OS X backend Makefile.am was missing a line concatenation, and
so the -xobjective-c directive was always ignored.
Instead of dumping everything into INCLUDES and LDADD we should follow
what the rest of the backends do, and use per-target CFLAGS and LDADD,
and reserve the INCLUDES to -D and -I directives.
Thanks to: Christian Hergert <chris@dronelabs.com>
Don't install inside the clutter-MAJOR_MINOR/ directory, but use
the API_VERSION (1.0).
Otherwise we'd have the Clutter headers for 1.x inside:
$includedir/clutter-1.0/clutter
And the JSON-related headers inside:
$includedir/clutter-1.<minor>/clutter
The fix for bug 1750 inside commit b190448e made Clutter-GTK spew
BadWindow errors. The reason for that is that we call XDestroyWindow()
without checking if the old Window is None; this happens if we call
clutter_x11_set_stage_foreign() on a new ClutterStage before it has
been realized.
Since Clutter-GTK does not need to realize the Stage it is going to
embed anymore (the only reason for that was to obtain a proper Visual
but now there's ClutterBackendX11 API for that), the set_stage_foreign()
call is effectively setting the StageX11 Window for the first time.
When we replace the stage Window using a foreign one we also need to
destroy the Window we created, if needed, to avoid leaking resources
all around.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1750
The "catch all" warning for a the mapped invariant violation is too
generic: it doesn't tell you why the invariant was broken in case
we are trying to map an unparented actor - e.g. through a Clone.
The right gcc define is __GNUC__ not __GNUC_. This typo had the side
effect that we were using the non gcc specific debug macros leading to
a less optmised CLUTTER_NOTE () than one could have dreamed of.
The vertex that should be used by the apply_relative_transform
is the one passed in as const, and the result should be placed
inside the non-const ClutterVertext. Currently, we are using
the latter, and thus the function is completely useless.
We should follow the convention for boxed types initializers of:
<type_name>_from_<another_type> (boxed, value)
For ClutterUnits as well; so:
clutter_units_pixels -> clutter_units_from_pixels
clutter_units_em -> clutter_units_from_em
...
We should still keep the short-hand version as a macro, though.
This makes clutter_stage_win32_show/hide be implementations of
ClutterStageWindowIface rather than overriding the methods in
ClutterActor. This reflects the changes in e4ff24bc for the X11
backend.
In case we are skipping too many frames, we should force the animation
instance to apply the final state of the animated interval inside the
::completed signal handler.
The Stage:offscreen property hasn't been tested for ages, and it
should really just use a FBO, not indirect rendering on a X Pixmap
only on X11. There are better ways anyway to get the current
contents of ClutterStage as a buffer anyway.
We might remove it at any later date, or actually make it work
properly.
When requesting a GLX visual from the X server we should explicitly
set the GL_DEPTH_SIZE and the GL_ALPHA_SIZE bits, otherwise some
functionality might just not work, or work unreliably.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1723
The GValue wrappers for ClutterShader types should always store
values using GL types (GLfloat, GLint) internally, but give and
take generic C types (float, int) to the Clutter side.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1359
The HLS to RGB conversion in case the S value is zero is:
R = G = B = luminance
ClutterColor uses a byte (0 to 255) for the R, G and B channels
encoding, while luminance is expressed using a floating point value
in the closed interval [0, 1]; thus the case above becomes:
R = G = B = (luminance * 255)
The clutter_color_from_hls() code is missing the final step of
de-normalizing the luminance value, and so it breaks the roundtrip
colorspace conversion between RGB and HLS.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1695
If clutter_x11_texture_set_window() was called after
clutter_x11_texture_pixmap_set_automatic(), then the Damage object would
not be properly created so updates to the window were ignored.
Refactor creation of the damage object to a separate function, and
call it from clutter_x11_texture_set_window() and clutter_x11_texture_set_pixmap()
as appropriate. Addition and removal of the filter function is made
conditional on priv->damage to make free_damage_resources() cleanly
idempotent.
See: http://bugzilla.gnome.org/show_bug.cgi?id=587189 for the original
bug report.
http://bugzilla.openedhand.com/show_bug.cgi?id=1710
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If you select all the text in a ClutterText, there is an invisible
cursor position either at the beginning or end. If it's at the beginning,
the bug is that left arrow won't clear the selection. If it's at the end,
the bug is that the right arrow won't.
Here are the ways to reproduce it:
a. Ctrl-A selects all and moves the hidden cursor position to the left.
b. For single line: End, Shift-Home does the same.
c. Or manually moving to the end and doing Shift-Left Arrow to the
beginning.
These all put it in the state where right arrow will properly clear
selection and move to cursor position 1, but left arrow fails to clear
the selection.
For b and c above, the opposite will give you the end case where right
arrow doesn't work.
Anyway, it turns out clear_selection is getting called, it just doesn't
show up because it's not doing a queue_redraw. So the attached patch
seems to fix things.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
It might be desirable for some applications and/or platforms to get
every motion event that was delivered to Clutter from the windowing
backend. By adding a per-stage flag we can bypass the throttling
done when processing the events.
http://bugzilla.openedhand.com/show_bug.cgi?id=1665
Keep the CoglContext in sync between GL and GLES backends. We ought
to find a way to have a generic context, though, and have backend
specific sections.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1698
We need to explicitly force order so that ClutterJson.gir and Cogl.gir
are present in the parent directory before we try to build Clutter.typelib.
http://bugzilla.openedhand.com/show_bug.cgi?id=1700
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
On some platforms (anything but Linux, and on obscure Linux
architectures) dolt isn't used, so $(top_builddir)/doltlibtool
won't exist. $(top_builddir)/libtool will always be generated
even if dolt is used, so just use that unconditionally. We don't
need the extra speed when linking the single program for
introspection.
http://bugzilla.openedhand.com/show_bug.cgi?id=1699
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
A lot of applications change the size of the stage from the default
before the stage is initially shown. The size change won't take affect
until the first allocation run. However we want the window to be at
the correct size when we first map it so we should force an allocation
run before showing the stage.
There was an explicit call to XResizeWindow in
clutter_stage_x11_show. This is not needed anymore because
XResizeWindow will already have been called by the allocate method.
By default NSWindow does not listen to mousemoved events and hence the
default behaviour for Actors using the "motion-event" signal differs
from backend to backend.
Using setAcceptsMouseMovedEvents seems to fix it; unfortunately, I
cannot verify it, but since nobody is currently working on the Quartz
backend I guess it cannot get more broken than how currently is.
Thanks to: Michael <michael@f3k.org>
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1687
It would be useful inside a custom actor's paint function to be able to
tell if this is a primary paint call, or if we are in fact painting on
behalf of a clone.
In Mutter we have an optimization not to paint occluded windows; this is
desirable for the windows per se, to conserve bandwith to the card, but
if something like an application switcher is using clones of these windows,
they will not get painted either; currently we have no way of
differentiating between the two.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1685
The CLUTTER_TEXTURE_IN_CLONE_PAINT was used with the old CloneTexture
actor; now that we have ClutterClone nothing sets the private flag
anymore, and the flag itself is not needed.
Updating the WM hints on the stage window shortcircuits if the stage
is in WITHDRAWN state, so we need to move the update_wm_hints() call
after the flag has been unset.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we manually wait for the VBLANK with:
- SGI_video_sync
- Direct usage of the DRM ioctl
Then we should call glFinish() first, or otherwise the swap-buffers
may be delayed by pending drawing and cause a tear.
http://bugzilla.openedhand.com/show_bug.cgi?id=1636
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
commit e2c4a2a9f8 fixed one thing but broke many others things :-/
hopfully this fixes that.
It turned out that the journal was mistakenly setting the OVERRIDE_LAYER0
flush option for all entries, but some other logic errors were also
uncovered in _cogl_material_equal.
Added an internal clutter function, _clutter_master_clock_ensure_next_iteration
that ensures another iteration of the master clock, can be called from repaint
functions as well as other threads.
To help us handle sliced textures; When flushing materials there is an
override option that can be given to replace the texture name for layer0
so we may iterate the slices without needing to modify the material
in use.
Since improving the journal's ability to batch state changes we added a
_cogl_material_equals function that is used by the journal to compare
materials and identify when a state change is required, but this wasn't
correctly considering the layer0 override resulting in false positives that
meant the journal wouldn't update the GL state and the first texture name
was used for all slices.
The cost of glGetFloatv with Mesa is still representing a majority of our
time in OpenGL for some applications, and the last thing left using this is
the current-matrix API when getting the projection matrix.
This adds a matrix stack for the projection matrix, so all getting, setting
and modification of the projection matrix is now managed by Cogl and it's only
when we come to draw that we flush changes to the matrix to OpenGL.
This also brings us closer to being able to drop internal use of the
deprecated OpenGL matrix functions, re: commit 54159f5a1d
The clutter_actor_get_allocation_coords() is not used, and since
the switch to floats in the Actor's API, it returns exactly what
the get_allocation_box() returns.
Currently, the transformation matrix for an actor is constructed
from scenegraph-related accessors. An actor, though, can call COGL
API to add new transformations inside the paint() implementation,
for instance:
static void
my_foo_paint (ClutterActor *a)
{
...
cogl_translate (-scroll_x, -scroll_y, 0);
...
}
Unfortunately these transformations will be completely ignored by
the scenegraph machinery; for instance, getting the actor-relative
coordinates from event coordinates is going to break badly because
of this.
In order to make the scenegraph aware of the potential of additional
transformations, we need a ::apply_transform() virtual function. This
vfunc will pass a CoglMatrix which can be used to apply additional
operations:
static void
my_foo_apply_transform (ClutterActor *a, CoglMatrix *m)
{
CLUTTER_ACTOR_CLASS (my_foo_parent_class)->apply_transform (a, m);
...
cogl_matrix_translate (m, -scroll_x, -scroll_y, 0);
...
}
The ::paint() implementation will be called with the actor already
using the newly applied transformation matrix, as expected:
static void
my_foo_paint (ClutterActor *a)
{
...
}
The ::apply_transform() implementations *must* chain up, so that the
various transformations of each class are preserved. The default
implementation inside ClutterActor applies all the transformations
defined by the scenegraph-related accessors.
Actors performing transformations inside the paint() function will
continue to work as previously.
Scanners like gtk-doc and g-ir-scanner get confused by:
typedef struct _Foo {
...
} Foo;
And expect instead:
typedef struct _Foo Foo;
struct _Foo {
...
};
CoglMatrix definition should be changed to avoid the former type.
The race we were experiencing in the X11 backends is apparently
back after the fix in commit 00a3c698.
This time, just delaying the setting of the SYNC_MATRICES flag
is not enough, so we can resume the use of a STAGE_IN_RESIZE
private flag.
This should also fix bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1668
In order to validate the sequence of:
XResizeWindow
ConfigureNotify
glViewport
that should happen on X11 we need to add debug annotations to the
calls to glViewport() done through COGL.
This avoids some calls to glGetFloatv, which have at least proven to be very
in-efficient in mesa at this point in time, since it always updates all derived
state even when it may not relate to the state being requested.
Fixes and adds a unit test for creating and drawing using materials with
COGL_INVALID_HANDLE texture layers.
This may be valid if for example the user has set a texture combine string
that only references a constant color.
_cogl_material_flush_layers_gl_state will bind the fallback texture for any
COGL_INVALID_HANDLE layer, later though we could explicitly check when the
current blend mode does't actually reference a texture source in which case
binding the fallback texture is redundant.
This tests drawing using cogl_rectangle, cogl_polygon and
cogl_vertex_buffer_draw.
Although we wouldn't recommend developers try and interleve OpenGL drawing
with Cogl drawing - we would prefer patches that improve Cogl to avoid this
if possible - we are providing a simple mechanism that will at least give
developers a fighting chance if they find it necissary.
Note: we aren't helping developers change OpenGL state to modify the
behaviour of Cogl drawing functions - it's unlikley that can ever be
reliably supported - but if they are trying to do something like:
- setup some OpenGL state.
- draw using OpenGL (e.g. glDrawArrays() )
- reset modified OpenGL state.
- continue using Cogl to draw
They should surround their blocks of raw OpenGL with cogl_begin_gl() and
cogl_end_gl():
cogl_begin_gl ();
- setup some OpenGL state.
- draw using OpenGL (e.g. glDrawArrays() )
- reset modified OpenGL state.
cogl_end_gl ();
- continue using Cogl to draw
Again; we aren't supporting code like this:
- setup some OpenGL state.
- use Cogl to draw
- reset modified OpenGL state.
When the internals of Cogl evolves, this is very liable to break.
cogl_begin_gl() will flush all internally batched Cogl primitives, and emit
all internal Cogl state to OpenGL as if it were going to draw something
itself.
The result is that the OpenGL modelview matrix will be setup; the state
corresponding to the current source material will be setup and other world
state such as backface culling, depth and fogging enabledness will be also
be sent to OpenGL.
Note: no special material state is flushed, so if developers want Cogl to setup
a simplified material state it is the their responsibility to set a simple
source material before calling cogl_begin_gl. E.g. by calling
cogl_set_source_color4ub().
Note: It is the developers responsibility to restore any OpenGL state that they
modify to how it was after calling cogl_begin_gl() if they don't do this then
the result of further Cogl calls is undefined.
This function should only need to be called in exceptional circumstances
since Cogl can normally determine internally when a flush is necessary.
As an optimization Cogl drawing functions may batch up primitives
internally, so if you are trying to use raw GL outside of Cogl you stand a
better chance of being successful if you ask Cogl to flush any batched
geometry before making your state changes.
cogl_flush() ensures that the underlying driver is issued all the commands
necessary to draw the batched primitives. It provides no guarantees about
when the driver will complete the rendering.
This provides no guarantees about the GL state upon returning and to avoid
confusing Cogl you should aim to restore any changes you make before
resuming use of Cogl.
If you are making state changes with the intention of affecting Cogl drawing
primitives you are 100% on your own since you stand a good chance of
conflicting with Cogl internals. For example clutter-gst which currently
uses direct GL calls to bind ARBfp programs will very likely break when Cogl
starts to use ARBfb programs internally for the material API, but for now it
can use cogl_flush() to at least ensure that the ARBfp program isn't applied
to additional primitives.
This does not provide a robust generalized solution supporting safe use of
raw GL, its use is very much discouraged.
Previously we would call _cogl_material_pre_change_notify unconditionally, but
now we wait until we really know we are removing a layer before notifying the
change, which will require a journal flush.
Since the convenience functions cogl_set_source_color4ub and
cogl_set_source_texture share a single material, cogl_set_source_color4ub
always calls cogl_material_remove_layer. Often this is a NOP though and
shouldn't require a journal flush.
This gets performance back to where it was before reverting the per-actor
material commits.
This reverts commit 8cf42ea8ac5c05f6b443c453f9c6c2a3cd75acfa.
Since the journal puts material colors in the vertex array accumulated for
drawing we don't need to flush the journal simply due to color changes which
means using cogl_set_source_color4ub is no longer a concern.
This reverts commit 85243da382025bd516937c76a61b8381f6e74689.
Since the journal puts material colors in the vertex array accumulated for
drawing we don't need to flush the journal simply due to color changes
which means using cogl_set_source_color4ub is no longer a concern.
Before any cogl vertex buffer drawing we call
enable_state_for_drawing_buffer which sets up the GL state, but we weren't
disabling unsed client texture coord arrays.
This simplifies the vertex data uploading in the journal, and could improve
performance. Modifying a VBO mid-scene could reqire synchronizing with the
GPU or some form of shadowing/copying to avoid modifying data that the GPU
is currently processing; the buffer was also being marked as GL_STATIC_DRAW
which could have made things worse.
Now we simply create a GL_STATIC_DRAW VBO for each flush and and delete it
when we are finished.
Using cogl_rectangle (and thus the journal) in
_cogl_add_path_to_stencil_buffer means we have to consider all the state
that the journal may change in case it may interfer with the direct GL calls
used. This has proven to be error prone and in this case the journal is an
unnecissary overhead. We now simply call glRectf instead of using
cogl_rectangle.
For small runs of text like icon labels, we can get better performance
going through the Cogl journal since text may then be batched together
with other geometry.
For larger runs of text though we still use VBOs since the cost of logging
the quads becomes too expensive, including the software transform which
isn't at all optimized at this point. VBOs also have the further advantage
of avoiding repeated validation of vertices by the driver and repeated
mapping of data into the GPU so long as the text doesn't change.
Currently the threshold is 100 vertices/25 quads. This number was plucked
out of thin air and should be tuned later.
With this change I see ~180% fps improvment for test-text. (x61s + i965 +
Mesa 7.6-devel)
We were missing the simplest test of all: are the two CoglHandles equal and
are the flush option flags for each material equal? This should improve
batching for some common cases.
Whenever we modify a material we call _cogl_material_pre_change_notify which
checks to see if the material is referenced by the journal and if so flushes
if before we modify the material.
Since the journal logs material colors directly into a vertex array (to
avoid us repeatedly calling glColor) then we know we never need to flush
the journal when material colors change.
Since most Clutter actors aren't much more than textured quads; flushing the
journal typically involves lots of 'change modelview; draw quad' sequences.
The amount of overhead involved in uploading a new modelview and queuing
that primitive is huge in comparison to simply transforming 4 vertices by
the current modelview when logging quads. (Note if your GPU supports HW
vertex transform, then it still does the projective and viewport transforms)
At the same time a --cogl-debug=disable-software-transform option has been
added for comparison and debugging.
This change allows typical pick scenes to be batched into a single draw call
and I'm seeing test-pick run over 200% faster with this. (i965 + Mesa
7.6-devel)
Enabling this option makes Cogl trace how the journal is managing to batch
your rectangles. The journal staggers how it emmits state to the GL driver
and the batches will normally get smaller for each stage, but ideally you
don't want to be in a situation where Cogl is only able to draw one quad per
modelview change and draw call.
E.g. this is a fairly ideal example:
BATCHING: journal len = 101
BATCHING: vbo offset batch len = 101
BATCHING: material batch len = 101
BATCHING: modelview batch len = 101
This isn't:
BATCHING: journal len = 1
BATCHING: vbo offset batch len = 1
BATCHING: material batch len = 1
BATCHING: modelview batch len = 1
BATCHING: journal len = 1
BATCHING: vbo offset batch len = 1
BATCHING: material batch len = 1
BATCHING: modelview batch len = 1
<repeat>
When this option is used Cogl will print a trace of all quads that get
logged into the journal, and a trace of quads as they get flushed.
If you are seeing a bug with the geometry being drawn by Cogl this may give
some clues by letting you sanity check the numbers being logged vs the
numbers being emitted.
For testing the VBO fallback paths it helps to be able to disable the
COGL_FEATURE_VBOS feature flag. When VBOs aren't available Cogl should use
client side malloc()'d buffers instead.
Previously we only used the Cogl matrix stack API for indirect contexts, but
it's too costly to keep on requesting modelview matrices from GL (for
logging in the journal) even for direct rendering.
I also experimented with a patch for mesa to improve performance and
discussed this with upstream, but we agreed to consider the GL matrix API
essentially deprecated. (For reference the GLES 2 and GL 3 specs have
removed the matrix APIs)
CoglColors shouldn't be compared using memcmp since they may contain
uninitialized padding bytes.
The prototype is also suitable for passing to g_hash_table_new as the
key_equal_func.
_cogl_pango_display_list_add_texture now uses this instead of memcmp.
We now put the color of materials into the vertex array used by the journal
instead of calling glColor() but the number of requests for the material
color were quite expensive so we have changed the material color to
internally be byte components instead of floats to avoid repeat conversions
and added _cogl_material_get_colorubv as a fast-path for the journal to
copy data into the vertex array.
To improve batching of geometry in the Cogl journal we need to avoid modifying
materials midscene.
Currently cogl_set_source_color and cogl_set_source_texture simply modify a
single shared material. In the future we can improve this so they use a pool
of materials that gets recycled as the journal is flushed, but for now we
give all ClutterRectangles their own private materials for painting with.
Currently cogl_set_source_color uses a single shared material which means
each actor that uses it causes the journal to flush if the color changes.
Until we improve cogl_set_source_color to use a pool of materials that can
be recycled as the journal is flushed we avoid mid-scene material changes by
giving all actors a private material instead.
The number of material layers enabled when logging a quad in the journal
determines the stride of the corresponding vertex data (since we need a set
of texture coordinates for each layer.) By padding data in the case where we
have only one layer we can avoid a change in stride if we are mixing single
and double layer primitives in a scene (e.g. relevent for a composite
manager that may use 2 layers for all shaped windows) Avoiding stride
changes means we can minimize calls to gl{Vertex,Color}Pointer when flushing
the journal.
Since we need to update the texcoord pointers when the actual number of
layers changes, this adds another batch_and_call() stage to deal with
glTexCoordPointer and enabling/disabling the client arrays.
Previously the journal was always flushed at the end of
_cogl_rectangles_with_multitexture_coords, (i.e. the end of any
cogl_rectangle* calls) but now we have broadened the potential for batching
geometry. In ideal circumstances we will only flush once per scene.
In summary the journal works like this:
When you use any of the cogl_rectangle* APIs then nothing is emitted to the
GPU at this point, we just log one or more quads into the journal. A
journal entry consists of the quad coordinates, an associated material
reference, and a modelview matrix. Ideally the journal only gets flushed
once at the end of a scene, but in fact there are things to consider that
may cause unwanted flushing, including:
- modifying materials mid-scene
This is because each quad in the journal has an associated material
reference (i.e. not copy), so if you try and modify a material that is
already referenced in the journal we force a flush first)
NOTE: For now this means you should avoid using cogl_set_source_color()
since that currently uses a single shared material. Later we
should change it to use a pool of materials that is recycled
when the journal is flushed.
- modifying any state that isn't currently logged, such as depth, fog and
backface culling enables.
The first thing that happens when flushing, is to upload all the vertex data
associated with the journal into a single VBO.
We then go through a process of splitting up the journal into batches that
have compatible state so they can be emitted to the GPU together. This is
currently broken up into 3 levels so we can stagger the state changes:
1) we break the journal up according to changes in the number of material layers
associated with logged quads. The number of layers in a material determines
the stride of the associated vertices, so we have to update our vertex
array offsets at this level. (i.e. calling gl{Vertex,Color},Pointer etc)
2) we further split batches up according to material compatability. (e.g.
materials with different textures) We flush material state at this level.
3) Finally we split batches up according to modelview changes. At this level
we update the modelview matrix and actually emit the actual draw command.
This commit is largely about putting the initial design in-place; this will be
followed by other changes that take advantage of the extended batching.
Removed the G_PARAM_CONSTRUCT from the property registration of
"load-async" and "load-data-async". It made it impossible to use only
load-data-async, as the async loading state would be unset when
load-async got set it's default FALSE value.
Use signed integers while combining window space clip rectangles, so we avoid
arithmatic errors later resulting in glScissor getting negative width and
height arguments.
Previously this was RGBA_8888. It souldn't really make a difference but for
consistency we expect almost all textures in use to have an internaly
premultiplied pixel format.
_cogl_texture_download_from_gl needs to create transient CoglBitmaps when
downloading sliced textures from GL, and then copies these as subregions
into the final target_bitmap. _cogl_texture_download_from_gl also supports
target_bitmaps with a different format to the source CoglTexture being
downloaded.
The problem was that in the case of slice textures we were always looking
at the format of the CoglTexture, not of the target_bitmap when setting
up the transient slice bitmap.
To allow for flushing of batched geometry within Cogl we can't support users
directly calling glReadPixels. glReadPixels is also awkward, not least
because it returns upside down image data.
All the unit tests have been swithed over and clutter_stage_read_pixels now
sits on top of this too.
I've found this is something I do quite often when debugging rendering
problems since its a simple way to wipe out lots of geometry and removes a
lot of unpredictable noise when logging geometry passing through the Cogl
journal.
We were calculating our vertex stride and allocating our vertex array
differently depending on whether the user passed TRUE for use_color or not.
The problem was that we were always writting color data to the array
regardless of use_color.
There was also a bug with _cogl_texture_sliced_polygon in that it was
writing byte color components but we were expecting float components. We
now use byte components in _cogl_multitexture_unsliced_polygon too and pass
GL_UNSIGNED_BYTE to glColorPointer.
Cogl already add similar defines but with the CLUTTER namespace
(CLUTTER_COGL_HAS_GL and CLUTTER_COGL_HAS_GLES). Let's just add two
similar defines with the COGL namespace. Removing the CLUTTER_COGL ones
could break applications silently for no real good reason.
While grepping through the public headers looking for invalid use of
private HAVE_* defines, I stumbled upon two out of sync comments. Yes
it's a very minor trivial change.
JSON-GLib provides simple accessors for basic types so that we
can avoid getting the JsonNode out of a complex type. This makes
the code simpler to understand.
Currently, Clutter depends on the internal copy of JSON-GLib for
the ClutterScript parser. This is done to allow building Clutter
on platforms that do not have the library installed on the system.
Just like we use the internal PNG/JPEG loader as a fallback in
case we don't have GdkPixbuf or CoreGraphics available, we should
use the internal copy of JSON-GLib only in case the system copy
is not present.
The change is simply to move the default for the --with-json
configure switch from "internal" to "check".
In order to allow stricter compliance, a third setting should
be present: "system", which fails if the system copy is not
available.
We should also change the introspection generation to avoid
breaking in case we require the installed Json-1.0.gir instead
of the generated ClutterJson.gir
The clutter_actor_pick() function just emits the ::pick signal
on the actor. Nobody should be using it, since the paint() method
is already context sensitive and will result in a ::pick emission
by itself. The clutter_actor_pick() is just confusing things.
In the int-to-float switch for actor properties, the ::size-change signal
was moved to use floats instead of integers. Sub-pixel precision for image
size is meaningless, though, so we should revert it back to ints.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1659
Instead of using a specific function to check whether the X
server supports the XInput extension we can use the generic
Xlib function XQueryExtension(). This cuts down the extra
checks inside the configure.ac and simplifies the code inside
clutter_x11_register_xinput().
Currently, XInput support requires a function call. In order to
make it easier for people to test it, we can also add a command
line switch that moves the pointer device detection and handling
to XInput. This should ensure that, at least for people building
Clutter with --enable-xinput, applications can be easily migrated
and regressions can be caught.
The StageManager singleton instance is already kept around
by the clutter_stage_manager_get_default() function; there is
no need to have it inside the main Clutter context as well.
Instead of using _clutter_context_get_default() and checking the
is_initialized flag, we should use the newly added private function
that does not cause side effects, especially for functions that have
to be called before any other Clutter function.
The _clutter_context_get_default() function will automatically
create the main Clutter context; if we just want to check whether
Clutter has been initialized this will complicate matters, by
requiring a call to g_type_init() inside the client code.
Instead, we should simply provide an internal API that checks
whether the main Clutter context exists and if it has been
initialized, without any side effect.
The input device API is split halfway thorugh the backends in a very
weird way. The data structures are private, as they should, but most
of the information should be available in the main API since it's
generic enough.
The device type enumeration, for instance, should be common across
every backend; the accessors for device type and id should live in the
core API. The internal API should always use ClutterInputDevice and
not the private X11 implementation when dealing with public structures
like ClutterEvent.
By adding accessors for the device type and id, and by moving the
device type enumeration into the core API we can cut down the amount
of symbols private and/or visible only to the X11 backends; this way
when other backends start implementing multi-pointer support we can
share the same API across the code.
HAVE_COGL_GLES2 is defined in config.h through the configure script and
should not be used in public headers.
The patch makes configure generate the right define that can be used
later in the header.
The clutter_context_get_default() function is private, but shared
across Clutter. For this reason, it should be prefixed by '_' so
that the symbol is hidden from the shared object.
ActorBox should have methods for easily extracting the X and Y
coordinates of the origin, and the width and height separately.
These methods will make it easier for high-level language bindings
to manipulate ActorBox instances and avoid the Geometry type.
The Vertex and ActorBox boxed types are meant to be used across
the API, but are fairly difficult to bind. Their memory management
is also unclear, and has to go through the indirection of
g_boxed_copy() and g_boxed_free().
Cairo stores the image data in ARGB native byte order so we need to
upload this as BGRA on little endian architectures and ARGB on big
endian. ClutterTexture doesn't currently expose any flags to describe
ARGB format so until we can fix the Clutter API it now uses the Cogl
API directly.
In order to chain up animations using clutter_actor_animate() and
friends you have to use an idle handler that guarantees that the
main loop spins at least once after the animation pointer has been
detached from the actor.
This has several drawbacks, first and foremost the fact that the
slice of the main loop for the idle handler might be starved by
other operations, like redrawing. This inevitably leads to tricks
with priorities and the like, contributing to the overall complexity.
Instead, we should guarantee that the animation instance created by
clutter_actor_animate() is valid for the ::completed signal until
it reaches its default handler; after that, the animation is detached
from the actor and destroyed. This means that it's possible to
create a new animation after the first is complete by simply using
g_signal_connect_after().
This unfortunately makes it impossible to keep a reference to the
animation pointer attached to the actor by using g_object_ref(); a
way to "fix" this would be to have a clutter_animation_attach()
and a clutter_animation_detach() pair of methods that allow attaching
any animation to an actor. This might overcomplicate what it is
the simple animation API, though, so it's currently not implemented
and left for future versions.
The test-easing interactive demo has been modified to show how
the animation queuing works by adding a command line switch that
recenters the animated actor once the first animation has ended.
Continuing in the tradition on making clutter_actor_animate() the
next g_object_connect(), here's the addition of the signal-after::
and signal-swapped:: modifiers for the automagic signal connection
arguments.
Fixes bug:
http://bugzilla.openedhand.com/show_bug.cgi?id=1646
In order to be ready for the next major version of GLib we need to
disable single header inclusion by using the G_DISABLE_SINGLE_INCLUDES
define in the build process.
We can't short-circuit the emission of ::queue-redraw for not-visible
actors, since ClutterClone uses that signal to know when things need
to be redrawn.
Calling clutter_actor_queue_redraw() out of clutter_actor_real_map() /
clutter_actor_real_unmap() was causing the flag state to get set
incorrectly from _clutter_actor_set_enable_paint_unmapped(), because
a paint queueing a redraw was not expected.
Moving queuing the redraw to clutter_actor_hide()/show() fixes this, and
also fixes a problem where showing a child of a cloned actor wouldn't
cause the clone to be repainted.
http://bugzilla.openedhand.com/show_bug.cgi?id=1484
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we have an not-visible texture pixmap, we need to:
- Still update it if it is realized, since it won't be
updated when shown. And it might be also be cloned.
- Queue a redraw if even if not visible, since it
it might be cloned.
http://bugzilla.openedhand.com/show_bug.cgi?id=1647
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
My patch to choose a premultiplied format when the user gives
COGL_PIXEL_FORMAT_ANY for the internal_format broke the case where the data
in question doesn't have and alpha channel.
This was accidentally missed when merging the premultiplication branch
since I merged a local version of the branch that missed this commit.
Although the underlying materials should allow layers with INVALID_HANDLES
it shouldn't be necissary to expose that via cogl_set_source_texture() and
it's easier to resolve a warning/crash here than odd artefacts/crashes later
in the pipeline.
Merge branch 'premultiplication'
[cogl-texture docs] Improves the documentation of the internal_format args
[test-premult] Adds a unit test for texture upload premultiplication semantics
[fog] Document that fogging only works with opaque or unmultipled colors
[test-blend-strings] Explicitly request RGBA_888 tex format for test textures
[premultiplication] Be more conservative with what data gets premultiplied
[bitmap] Fixes _cogl_bitmap_fallback_unpremult
[cogl-bitmap] Fix minor copy and paste error in _cogl_bitmap_fallback_premult
Avoid unnecesary unpremultiplication when saving to local data
Don't unpremultiply Cairo data
Default to a blend function that expects premultiplied colors
Implement premultiplication for CoglBitmap
Use correct texture format for pixmap textures and FBO's
Add cogl_color_premultiply()
Clarifies that if you give COGL_PIXEL_FORMAT_ANY as the internal format for
cogl_texture_new_from_file or cogl_texture_new_from_data then Cogl will
choose a premultiplied internal format.
The fixed function fogging provided by OpenGL only works with unmultiplied
colors (or if the color has an alpha of 1.0) so since we now premultiply
textures and colors by default a note to this affect has been added to
clutter_stage_set_fog and cogl_set_fog.
test-depth.c no longer uses clutter_stage_set_fog for this reason.
In the future when we can depend on fragment shaders we should also be
able to support fogging of premultiplied primitives.
We don't want to force texture data to be premultipled if the user
explicitly specifies a non premultiplied internal_format such as
COGL_PIXEL_FORMAT_RGBA_8888. So now Cogl will only automatically
premultiply data when COGL_PIXEL_FORMAT_ANY is given for the
internal_format, or a premultiplied internal format such as
COGL_PIXEL_FORMAT_RGBA_8888_PRE is requested but non-premultiplied source
data is given.
This approach is consistent with OpenVG image formats which have already
influenced Cogl's pixel format semantics.
The _cogl_unpremult_alpha_{first,last} functions which
_cogl_bitmap_fallback_unpremult depends on were incorrectly casting each
of the byte components of a texel to a gulong and performing shifts as
if it were dealing with the whole texel.
It now just uses array indexing to access the byte components without
needing to cast or manually shift any bits around.
Even though we used to depend on unpremult whenever we used a
ClutterCairoTexture, clutter_cairo_texture_context_destroy had it's own
unpremult code which worked which is why this bug wouldn't have been noticed
before.
Now that we typically have premultiplied data stored in Cogl
textures, when fetching a texture into local data for temporary
storage, use a premultiplied format to avoid an unpremultiply/
premultiply roundtrip.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Instead of unpremultiplying the Cairo data, pass it directly to Cogl
in premultiplied form; we now *prefer* premultiplied data.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
Many operations, like mixing two textures together or alpha-blending
onto a destination with alpha, are done most logically if texture data
is in premultiplied form. We also have many sources of premultiplied
texture data, like X pixmaps, FBOs, cairo surfaces. Rather than trying
to work with two different types of texture data, simplify things by
always premultiplying texture data before uploading to GL.
Because the default blend function is changed to accommodate this,
uses of pure-color CoglMaterial need to be adapted to add
premultiplication.
gl/cogl-texture.c gles/cogl-texture.c: Always premultiply
non-premultiplied texture data before uploading to GL.
cogl-material.c cogl-material.h: Switch the default blend functions
to ONE, ONE_MINUS_SRC_ALPHA so they work correctly with premultiplied
data.
cogl.c: Make cogl_set_source_color() premultiply the color.
cogl.h.in color-material.h: Add some documentation about
premultiplication and its interaction with color values.
cogl-pango-render.c clutter-texture.c tests/interactive/test-cogl-offscreen.c:
Use premultiplied colors.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
cogl-bitmap.c cogl-bitmap-pixbuf.c cogl-bitmap-fallback.c cogl-bitmap-private.h:
Add _cogl_bitmap_can_premult(), _cogl_bitmap_premult() and implement
a reasonably fast implementation in the "fallback" code.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
RGBA data in X pixmaps and in FBOs is already premultiplied; use
the right format when creating cogl textures.
http://bugzilla.openedhand.com/show_bug.cgi?id=1406
Signed-off-by: Robert Bragg <robert@linux.intel.com>
