Commit Graph

138 Commits

Author SHA1 Message Date
Robert Bragg
0e7a632e13 Adds initial Emscripten support to Cogl
This enables basic Emscripten support in Cogl via the SDL winsys.
Assuming you have setup an emscripten toolchain you can configure Cogl
like this:

 emconfigure ./configure --enable-debug --enable-emscripten

Building the examples will build .html files that can be loaded directly
by a WebGL enabled browser.

Note: at this point the emscripten support has just barely been smoke
tested so it's expected that as we continue to build on this we will
learn about more things we need to change in Cogl to full support this
environment.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
2013-05-29 19:30:44 +01:00
Daniel Stone
ea7d3b8476 Add fence API
cogl_framebuffer_add_fence creates a synchronisation fence, which will
invoke a user-specified callback when the GPU has finished executing all
commands provided to it up to that point in time.

Support is currently provided for GL 3.x's GL_ARB_sync extension, and
EGL's EGL_KHR_fence_sync (when used with OpenGL ES).

Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=691752

(cherry picked from commit e6d37470da9294adc1554c0a8c91aa2af560ed9f)
2013-05-28 21:36:03 +01:00
Robert Bragg
afbb13e1a4 Add compiler deprecation warnings
This adds compiler symbol deprecation declarations for old Cogl APIs so
that users can easily see via compiler warning when they are using these
symbols, and also see a hint for what the apis should be replaced with.

So that users of Cogl can manage when to show these warnings this
introduces a scheme borrowed from glib whereby you can declare what
version of the Cogl api you are using:

COGL_VERSION_MIN_REQUIRED can be defined to indicate the oldest Cogl api
that the application wants to use. Cogl will only warn about
deprecations for symbols that were deprecated earlier than this required
version. If this is left undefined then by default Cogl will warn about
all deprecations.

COGL_VERSION_MAX_ALLOWED can be defined to indicate the newest api
that the application uses. If the application uses symbols newer than
this then Cogl will give a warning about that.

This patch removes the need to maintain the COGL_DISABLE_DEPRECATED
guards around deprecated symbols.

This patch fixes a few uses of deprecated symbols in the examples/

Reviewed-by: Neil Roberts <neil@linux.intel.com>
2013-04-24 22:23:50 +01:00
Neil Roberts
abaca02235 Add $(LIBM) to the LDADD for all of the examples and tests
Some of the examples and tests are using functions from -lm. With some
linkers, if we don't expicitly link against it an error will be
reported. This patch adds the library to all of the examples even
though not all of them use math functions because I don't think it
will do any harm and it will save us having to remember to add it if
an example later starts using some math functions.

https://bugzilla.gnome.org/show_bug.cgi?id=697330

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 66a1aeaee1f7cdcdd505f5745277723a43d714b6)

Conflicts:
	examples/Makefile.am
	tests/conform/Makefile.am
	tests/micro-perf/Makefile.am
2013-04-23 18:32:47 +01:00
Neil Roberts
20657d6245 pipeline-cache: Use a special trimmed down pipeline for the key
When a pipeline is added to the cache, a normal copy would previously be
made to use as the key in the hash table. This copy keeps a reference
to the real pipeline which means all of the resources it contains are
retained forever, even if they aren't necessary to generate the hash.

This patch changes it to create a trimmed down copy that only has the
state necessary to generate the hash. A new function called
_cogl_pipeline_deep_copy is added which makes a new pipeline that is
directly a child of the root pipeline. It then copies over the
pertinent state from the original pipeline. The pipeline state is
copied using the existing _cogl_pipeline_copy_differences function.
There was no equivalent function for the layer state so I have added
one.

That way the pipeline key doesn't have the texture data state and it
doesn't hold a reference to the original pipeline so it should be much
cheaper to keep around.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit e27e01c1215e7e7c7c0183ded11dd769bb112c5c)
2013-04-04 13:38:43 +01:00
Neil Roberts
e98960a685 Conformance test to check whether the pipeline cache holds textures
Currently when a unique pipeline is created and added to the pipeline
cache that pipeline will live forever which includes keeping a
reference to any large resources that the pipeline has such as
textures. These textures don't actually need to be kept for the
pipeline to be used as a key in the hash table so ideally we wouldn't
do this. This test case tries rendering with a pipeline that has
textures and then checks whether the textures are successfully
destroyed after the pipeline is unreffed. The test is currently marked
as a known failure because the pipeline cache will prevent them from
being destroyed.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 0056f805dadd46b966d57f66b02890b8c29971ac)
2013-04-04 13:37:51 +01:00
Neil Roberts
22363a4137 Prune redundant pipeline ancestry after adding a layer difference
Adding a layer difference may mean the pipeline overrides all of the
layers of its parent which might make the parent redundant so we
should try to prune the hierarchy.

This is particularly important for CoglGst because whenever a new
frame is ready it tries to make a copy of the pipeline it last used
and then replace all of the textures in the layers. Without this patch
the new pipeline would keep the parent pipeline alive which means also
keeping the old textures alive so all of the frames of the video would
effectively be leaked.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 576c7b55aa835448c977f1d79d128dffd40e7cd8)
2013-03-19 17:53:43 +00:00
Neil Roberts
f9456574ef Add test to verify replacing a layer doesn't leak the pipeline parent
The current recommendation for pipelines is that once they have been
used for painting then they should be considered immutable. If you
want to modify a pipeline you should instead make a copy and unref the
original pipeline. Internally we try to check whether the modified
copy replaces all of the properties of the parent and prune a
redundant ancestor hierarchy. Pruning the hierarchy is particularly
important if the pipelines contain textures because otherwise the
textures may be leaked when the parent pipeline keeps a reference to
it.

This test verifies that usage pattern by creating a chain of pipeline
copies each with their own replacement texture. Some user data is then
set on the textures with a callback so that we can verify that once
the original pipelines are destroyed then the textures are also
destroyed.

The test is currently failing because Cogl doesn't correctly prune
ancestory for layer state authority.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 3fbec92acb90008492eb125025f92b42d6e07930)
2013-03-19 17:53:43 +00:00
Neil Roberts
956d39ac30 Add fragment and vertex snippet hooks for global declarations
This adds hook points to add global function and variable declarations
to either the fragment or vertex shader. The declarations can then be
used by subsequent snippets. Only the ‘declarations’ string of the
snippet is used and the code is directly put in the global scope near
the top of the shader.

The reason this is necessary rather than just adding a normal snippet
with the declarations is that for the other hooks Cogl assumes that
the snippets are independent of each other. That means if a snippet
has a replace string then it will assume that it doesn't even need to
generate the code for earlier hooks which means the global
declarations would be lost.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit ebb82d5b0bc30487b7101dc66b769160b40f92ca)
2013-02-27 14:43:55 +00:00
Neil Roberts
fc86d0e12e win32: Minor build fixes for building for win32
This fixes some minor errors and warnings that were preventing Cogl
building with mingw32:

• cogl-framebuffer-gl.c was not including cogl-texture-private.h.
  Presumably something else ends up including that when building for
  GLX.

• The WGL winsys was not including cogl-error-private.h

• A call to strsplit in the WGL winsys was wrong.

• For some reason the test-wrap-rectangle-textures test was trying to
  include the GDKPixbuf header.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 5380343399f834d9f96ca3b137d49c9c2193900a)
2013-02-21 15:20:55 +00:00
Neil Roberts
861b119a53 journal: Dirty the modelview matrix state when flushing
The journal manually flushes its own modelview matrix state so it
needs to mark the state as dirty so that if a primitive is drawn with
the same matrix state as the last primitive it will correctly reflush
it.

https://bugzilla.gnome.org/show_bug.cgi?id=693612

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit c7290c994c742456ff0977cb394c289afb377049)
2013-02-19 11:06:59 +00:00
Neil Roberts
806a2e5813 Add a test to check interleaving primitives and the journal
This adds a conformance test which draws a rectangle using the journal
in-between two rectangles drawn with primitives without changing any
other state. Currently this is failing because the modelview matrix
state is not correctly flushed.

The journal also flushes in own clip state so the test additionally
puts everything in a clip and verifies that that worked. This is not
currently broken but we might as well test it.

https://bugzilla.gnome.org/show_bug.cgi?id=693612

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit b703f9a1a98894a12021cbdd632e1d59214e612f)
2013-02-19 11:06:59 +00:00
Robert Bragg
255b815f76 conform: explicitly check value of boolean env vars
For the boolean environment variables that affect the running of the
conformance tests we now explicitly check the value of those variables
so that "0", "off" and "false" (upper or lower case) will be considered
as FALSE instead of just interpreting set as TRUE and unset as FALSE. If
the value is set to something entirely spurious then we abort with a
warning message. Thanks to Artie Eoff for suggesting this change.

https://bugzilla.gnome.org/show_bug.cgi?id=693894

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 25a8cf3607a482ca390eb9841295d1b365cbe53b)
2013-02-15 17:45:03 +00:00
Robert Bragg
7ab54be3b7 avoid redundant idle if using FRAME_SYNC to throttle
This updates the examples and test-journal which now use the _FRAME_SYNC
events to throttle rendering so that they don't install a redundant idle
handler to paint when they get a FRAME_SYNC event and instead they now
directly paint when the event is received.

(cherry picked from commit 579eb75e6ac6f50d7a9cfe5093435126158b3c96)
2013-02-15 17:44:49 +00:00
Robert Bragg
4347f33917 test-journal: use new _add_frame_callback api
This updates test-journal to use the new
cogl_onscreen_add_frame_callback() api to use _SYNC events for
throttling.

(cherry picked from commit 24e6a5376ed3982f5647e2c2df0618272c381636)
2013-02-15 17:43:26 +00:00
Neil Roberts
0494e70955 test-gles2-context: Read pixels using GL_RGBA not GL_RGB
The GLES2 spec only guarantees calling glReadPixels with GL_RGBA and
an implementation specific format. Mesa seems to now reject reading
with GL_RGB so the test had started failing. This fixes it to just
read using GL_RGBA.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 745cbcbdee0f5b4df4c6a735b03709248a551884)
2013-02-08 12:20:33 +00:00
Neil Roberts
d6dacf2f65 test-gles2-context: Use test_utils_compare_pixel instead of g_asserts
test_utils_compare_pixel makes the error report slightly easier to
read because it displays the values for the whole pixel instead of
reporting that there was a difference somewhere.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit a094ac9688a5e6b53be1cd379dc045973aab2fae)
2013-02-08 12:20:33 +00:00
Neil Roberts
9a8a26270c test-write-texture-formats: Add fuzziness to the pixel comparisons
The rounding used when storing 10-bit per component data into an 8-bit
per component texture seems to have changed in recent versions of Mesa
which was causing this test to fail. I've also noticed this failing on
the NVidia binary driver. This patch adds some fuzziness to the
comparison so that it will pass. There is a new test_utils function
called test_utils_compare_pixel_and_alpha which is the same as
test_utils_compare_pixel except that it also compares the alpha
component.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit ce626fb3939b0f200d85ccdf32809608b879212d)
2013-01-22 18:00:11 +00:00
Neil Roberts
364f232507 tests: Mark test_framebuffer_get_bits as only working on GL
It looks like it's not meant to be valid to create a framebuffer with
an alpha-only texture as a render target on GLES. Since the following
Mesa commit, this requirement is now enforced so that the
test_framebuffer_get_bits test fails:

http://cgit.freedesktop.org/mesa/mesa/commit/?id=cf300eaa

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit cfb0859cab843b000f4baa3ca155a245730edcfa)
2013-01-22 18:00:11 +00:00
Robert Bragg
50005a9364 build: update to build with automake 1.13
This make autogen.sh look for automake-1.13 and also updates all
Makefile.am files to no longer use the INCLUDES variable which automake
1.13 warns is deprecated by AM_CPPFLAGS.

https://bugzilla.gnome.org/show_bug.cgi?id=690891

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 5de5569e960102afe979a5f2f0403e1defebca62)
2013-01-22 18:00:05 +00:00
Robert Bragg
ebdac3162a tests: flag backface culling failure without NPOT support
This marks that test-backface-culling is currently known to fail without
NPOT texture support. This allows us do a 1.13 snapshot release before
we find a fix for this.
2013-01-22 17:48:19 +00:00
Neil Roberts
0b01c91fc5 framebuffer: Bind the framebuffer before querying the bits
The GL framebuffer driver now makes sure to bind the framebuffer
before counting the number of bits. Previously it would just query the
number of bits for whatever framebuffer happened to be used last.

In addition the virtual for querying the framebuffer bits has been
modified to take a pointer to a structure instead of a separate
pointer to each component. This should make it slightly more efficient
and easier to maintain.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit e9c58b2ba23a7cebcd4e633ea7c3191f02056fb5)
2013-01-22 17:48:18 +00:00
Neil Roberts
41612bfc74 Add a test for getting the component sizes from different fbs
This adds a test which creates two offscreen framebuffers, one with
just an alpha component texture and the other will a full RGBA
texture. The bit sizes of both framebuffers are then checked to verify
that they either have or haven't got bits for the RGB components.

The test currently fails because the framebuffer functions don't bind
the framebuffer before querying so they just query whichever
framebuffer happened to be used last.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 7ca01373efe908efc9f18f2cb7f4a51c274ef677)
2013-01-22 17:48:18 +00:00
Neil Roberts
1e6ec66330 Add a conformance test for some wrap modes on a rectangle texture
This adds a conformance test which renders a rectangle texture using
the two wrap modes clamp-to-edge and repeat. It then verifies that the
correct region of the texture is drawn for the texture coordinates
that are > 1.0.

The test currently always fails. The cogl_framebuffer_draw_rectangle
function is documented to always take normalized texture coordinates
regardless of the coordinate system of the texture. This works
correctly if all of the texture coordinates are in the range [0.0,1.0]
because cogl-primitives uses a different code path in that case.
However if the multiple-quad code path is taken then the coordinates
actually need to un-normalized for it to work.

There is a comment in cogl_meta_texture_foreach_in_region() which
implies that the incoming coordinates should always be normalized.
The documentation for the callback says that the resulting sub-texture
coordinates will always be in the coordinate system of the low-level
texture. However it doesn't work out like this because the meta
texture function uses the span iterating function which always returns
normalized coordinates. It looks like there needs to be some more
conversions going on somewhere.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit d2059bb32b8015060e10f41dbbb68d4230b47ddb)
2013-01-22 17:48:18 +00:00
Neil Roberts
671275ba36 Also flip the virtual coordinates when iterating spans
_cogl_texture_spans_foreach_in_region first swaps over the texture
coordinates if they are flipped so that it can always iterate in a
positive direction. It sets a flag so that it will remember that the
coordinates are flipped. Before invoking the callback it is meant to
reflip the coordinates so that the callee doesn't need to be aware of
the flipping. However it was only flipping the sub-texture coordinates
and not the virtual coordinates. This was causing sliced textures to
draw their slice rectangles with the wrong geometry.
test-backface-culling was failing because of this.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit e7338a1e09cb22151374aefa6f0bb58485af9189)
2013-01-22 17:48:18 +00:00
Neil Roberts
a2aa04f219 texture-2d-slice: Fix the foreach_sub_texture_in_region implementation
There were a few problems with the sub texture iterating code of
sliced textures which were causing some conformance tests to fail when
NPOT textures are disabled:

• The spans are stored in un-normalized coordinates and the
  coordinates passed to the foreach function are normalized. The
  function was trying to un-normalize them before passing them to the
  span iterator code but it was using the wrong factor which was
  causing it to actually doubley normalize them.

• The shim function to renormalize the coordinates before passing them
  to the callback was renormalizing the sub-texture coordinates
  instead of the virtual coordinates. The sub-texture coordinates are
  already in the right scale for whatever is the underlying texture so
  we don't need to touch them. Instead we need to normalize the
  virtual coordinates because these are coming from the un-normalized
  coordinates that we passed to the span iterating code.

• The normalize factors passed to the span iterating were always 1.
  The code uses this normalizing factor to round the incoming
  coordinates to the nearest multiple of a full texture. It divides
  the coordinates by the factor rather than multiplying so it looks
  like we should be passing the virtual texture size here.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit c9773566b0ec0a17b34c440090529de8cff9609e)
2013-01-22 17:48:18 +00:00
Robert Bragg
73e8a6d7ce Allow lazy texture storage allocation
Consistent with how we lazily allocate framebuffers this patch allows us
to instantiate textures but still specify constraints and requirements
before allocating storage so that we can be sure to allocate the most
appropriate/efficient storage.

This adds a cogl_texture_allocate() function that is analogous to
cogl_framebuffer_allocate() which can optionally be called to explicitly
allocate storage and catch any errors. If this function isn't used
explicitly then Cogl will implicitly ensure textures are allocated
before the storage is needed.

It is generally recommended to rely on lazy storage allocation or at
least perform explicit allocation as late as possible so Cogl can be
fully informed about the best way to allocate storage.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 1fa7c0f10a8a03043e3c75cb079a49625df098b7)

Note: This reverts the cogl_texture_rectangle_new_with_size API change
that dropped the CoglError argument and keeps the semantics of
allocating the texture immediately. This is because Mutter currently
uses this API so we will probably look at updating this later once
we have a corresponding Mutter patch prepared. The other API changes
were kept since they only affected experimental api.
2013-01-22 17:48:17 +00:00
Neil Roberts
6bcfc8342a Fix handling of binding errors when uploading a full texture
Both the texture drivers weren't handling errors correctly when a
CoglPixelBuffer was used to set the contents of an entire texture.
This was causing it to hit an assertion failure in the pixel buffer
tests.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 888733d3c3b24080d2f136cedb3876a41312e4cf)
2013-01-22 17:48:09 +00:00
Neil Roberts
c72ede0560 Simplify test-pixel-buffer
test-pixel-buffer previously had two tests, one to check filling the
pixel buffer by mapping it and another to fill it by just setting the
data. These tests were set up in a kind of confusing way where it
would try to paint both steps and then validate them together using
colors looked up from a table. This patch separates out the two tests
and gets rid of the tables which hopefully makes them a bit easier to
follow.

The contents of the bitmap are now set to an image with has a
different colour for each of its four quadrants instead of just a
single colour in the hope that this will be a bit more of an extensive
test.

The old code had a third test that was commented out. This test has
been removed.

The textures are now created using cogl_texture_2d_new_* which means
they won't be in the atlas. This exposes a bug where setting the
entire contents of the texture won't handle errors properly and it
will hit an assertion. The previous code using the atlas would end up
only setting a sub-region of the larger atlas texture so the bug
wouldn't be hit. To make sure we still test this code path there is
now a third test which explicitly sets a sub-region of the texture
using the bitmap.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 8beb3a4cc20f539a50645166485b95e8e5b25779)
2013-01-22 17:48:09 +00:00
Robert Bragg
4b41743b92 tests: port test-texture-get-set-data to be standalone
This ports the test-texture-get-set-data clutter test to be a standalone
Cogl test.

(cherry picked from commit 40defa3dbd355754d0f7611d3c50de35db514e4a)
2013-01-22 17:48:09 +00:00
Robert Bragg
f53fb5e2e0 Allow propogation of OOM errors to apps
This allows apps to catch out-of-memory errors when allocating textures.

Textures can be pretty huge at times and so it's quite possible for an
application to try and allocate more memory than is available. It's also
very possible that the application can take some action in response to
reduce memory pressure (such as freeing up texture caches perhaps) so
we shouldn't just automatically abort like we do for trivial heap
allocations.

These public functions now take a CoglError argument so applications can
catch out of memory errors:

cogl_buffer_map
cogl_buffer_map_range
cogl_buffer_set_data
cogl_framebuffer_read_pixels_into_bitmap
cogl_pixel_buffer_new
cogl_texture_new_from_data
cogl_texture_new_from_bitmap

Note: we've been quite conservative with how many apis we let throw OOM
CoglErrors since we don't really want to put a burdon on developers to
be checking for errors with every cogl api call. So long as there is
some lower level api for apps to use that let them catch OOM errors
for everything necessary that's enough and we don't have to make more
convenient apis more awkward to use.

The main focus is on bitmaps and texture allocations since they
can be particularly large and prone to failing.

A new cogl_attribute_buffer_new_with_size() function has been added in
case developers need to catch OOM errors when allocating attribute buffers
whereby they can first use _buffer_new_with_size() (which doesn't take a
CoglError) followed by cogl_buffer_set_data() which will lazily allocate
the buffer storage and report OOM errors.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978)

Note: since we can't break the API for Cogl 1.x then actually the main
purpose of cherry picking this patch is to keep in-line with changes
on the master branch so that we can easily cherry-pick patches.

All the api changes relating stable apis released on the 1.12 branch
have been reverted as part of cherry-picking this patch so this most
just applies all the internal plumbing changes that enable us to
correctly propagate OOM errors.
2013-01-22 17:48:07 +00:00
Neil Roberts
fda5e15bda Add a conformance test using alpha textures
This adds a conformance test with an alpha-component texture. The
texture is rendered using a pipeline with the same layer combine mode
as cogl-pango.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 05190519bad4519e66cbdb5326943c832d15a841)
2013-01-22 17:48:06 +00:00
Neil Roberts
996260ceab tests: Differentiate between known failures and missing requirements
Previously when make test is run it would say ‘fail’ in lower case
letters for both tests that are known bugs we need to fix and for
drivers that can't run the test. This makes it too easy to lose track
of bugs.

To fix this, the ADD_TEST macro has now been changed to take two sets
of flags instead of just one. The first specifies the requirements for
the test to run at all. The second specifies the set of flags required
to run without any known failures. The table in the test report now
says ‘n/a’ instead of ‘fail’ for tests that don't match the feature
requirements.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 723f8d4402e7b2ef3a71f51bb29b10d1c0ec8d81)
2013-01-22 17:48:06 +00:00
Neil Roberts
0b8780f94c tests: Don't report success when the test is skipped
The tests that were using GLSL or 3D textures were directly printing
“Skipped” and then reporting success. Instead of doing this they now
just try to continue without checking for the feature but the
appropriate test requirement flag is now set in test-conform-main so
the table of results will correctly display that is a failure.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit b8f918e44b243a5fa36d5f382a90bebb0de0728f)
2013-01-22 17:48:06 +00:00
Robert Bragg
fa62fe2a4f tests: update inline with master
This renames the global ctx and fb variables to test_ctx and test_fb
respectively in line with the names use on the master branch. This is to
make it easier to cherry pick patches from master.
2013-01-22 17:48:06 +00:00
Neil Roberts
4f6fe6f0e2 Fixes for --disable-glib
This fixes some problems which were stopping --disable-glib from
working properly:

• A lot of the public headers were including glib.h. This shouldn't be
  necessary because the API doesn't expose any glib types. Otherwise
  any apps would require glib in order to get the header.

• The public headers were using G_BEGIN_DECLS. There is now a
  replacement macro called COGL_BEGIN_DECLS which is defined in
  cogl-types.h.

• A similar fix has been done for G_GNUC_NULL_TERMINATED and
  G_GNUC_DEPRECATED.

• The CFLAGS were not including $(builddir)/deps/glib which was
  preventing it finding the generated glibconfig.h when building out
  of tree.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 4138b3141c2f39cddaea3d72bfc04342ed5092d0)
2013-01-22 17:48:05 +00:00
Neil Roberts
11126a1b7e tests: Convert test-npot-texture to Cogl
This updates the npot-texture test to use Cogl directly instead of
relying on Clutter.

Note that this currently fails when Cogl ends up using sliced
textures. It looks like there is some bug with the meta texture
function to iterate the primitive textures. This happens when
COGL_DEBUG=disable-npot-textures is set.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 32f0e1e8fff56be3123dc4571f07bb5a314f6818)
2013-01-22 17:48:04 +00:00
Neil Roberts
53f43a428f Add a test case for cogl_buffer_map_range
This adds a small test case which maps a sub region of a small
attribute buffer and replaces the texture coordinates of one of the
vertices. The vertices are then drawn and the correct colours are
checked.

There is now a new test requirement for the
COGL_FEATURE_ID_MAP_BUFFER_FOR_WRITE feature which this test requires.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 22183265b021dd038338b4398056c0a1eae77edb)
2013-01-22 17:48:03 +00:00
Neil Roberts
9b59588c53 Add a simple conformance test for alpha testing
This adds a simple test which sets an alpha test on a pipeline and
then renders a texture. It then verifies that the transparent parts of
the texture aren't drawn. This is currently failing with the GL3
driver because GL3 requires the alpha test to be implemented in GLSL
but the generated alpha test uniform is only updated for the GLES2
driver.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 4ec04507bfaf2d61707dccfb59ac7326962ee741)
2013-01-22 17:48:01 +00:00
Neil Roberts
2616ae0fa9 Add a GL 3 driver
This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When
requested, the GLX, EGL and SDL2 winsyss will set the necessary
attributes to request a forward-compatible core profile 3.1 context.
That means it will have no deprecated features.

To simplify the explosion of checks for specific combinations of
context->driver, many of these conditionals have now been replaced
with private feature flags that are checked instead. The GL and GLES
drivers now initialise these private feature flags depending on which
driver is used.

The fixed function backends now explicitly check whether the fixed
function private feature is available which means the GL3 driver will
fall back to always using the GLSL progend. Since Rob's latest patches
the GLSL progend no longer uses any fixed function API anyway so it
should just work.

The driver is currently lower priority than COGL_DRIVER_GL so it will
not be used unless it is specificly requested. We may want to change
this priority at some point because apparently Mesa can make some
memory savings if a core profile context is used.

In GL 3, getting the combined extensions string with glGetString is
deprecated so this patch changes it to use glGetStringi to build up an
array of extensions instead. _cogl_context_get_gl_extensions now
returns this array instead of trying to return a const string. The
caller is expected to free the array.

Some issues with this patch:

• GL 3 does not support GL_ALPHA format textures. We should probably
  make this a feature flag or something. Cogl uses this to render text
  which currently just throws a GL error and breaks so it's pretty
  important to do something about this before considering the GL3
  driver to be stable.

• GL 3 doesn't support client side vertex buffers. This probably
  doesn't matter because CoglBuffer won't normally use malloc'd
  buffers if VBOs are available, but it might but worth making
  malloc'd buffers a private feature and forcing it not to use them.

• GL 3 doesn't support the default vertex array object. This patch
  just makes it create and bind a single non-default vertex array
  object which gets used just like the normal default object. Ideally
  it would be good to use vertex array objects properly and attach
  them to a CoglPrimitive to cache the state.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2013-01-22 17:48:01 +00:00
Robert Bragg
ab72a2275f build: don't include deps/glib headers if glib enabled
If we're using the system glib library then we need to make sure not to
include headers under deps/glib otherwise we end up with with
incompatible typedefs that break the build.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 5d5fc97b59951ec56a4193b7ee7909ebd3cfbb94)
2013-01-22 17:47:58 +00:00
Damien Lespiau
d2c41502a4 build: Allow to build cogl without an external glib dependency
This commit pushes --disable-glib to the extreme of embedding the par of
glib cogl depends on in tree to be able to generate a DSO that does not
depend on an external glib.

To do so, it:
  - keeps a lot of glib's configure.ac in as-glibconfig.m4
  - pulls the code cogl depends on and the necessary dependencies

Reviewed-by: Robert Bragg <robert@linux.intel.com>
2013-01-22 17:47:58 +00:00
Robert Bragg
df21e20f65 Adds CoglError api
Although we use GLib internally in Cogl we would rather not leak GLib
api through Cogl's own api, except through explicitly namespaced
cogl_glib_ / cogl_gtype_ feature apis.

One of the benefits we see to not leaking GLib through Cogl's public API
is that documentation for Cogl won't need to first introduce the Glib
API to newcomers, thus hopefully lowering the barrier to learning Cogl.

This patch provides a Cogl specific typedef for reporting runtime errors
which by no coincidence matches the typedef for GError exactly.  If Cogl
is built with --enable-glib (default) then developers can even safely
assume that a CoglError is a GError under the hood.

This patch also enforces a consistent policy for when NULL is passed as
an error argument and an error is thrown. In this case we log the error
and abort the application, instead of silently ignoring it. In common
cases where nothing has been implemented to handle a particular error
and/or where applications are just printing the error and aborting
themselves then this saves some typing. This also seems more consistent
with language based exceptions which usually cause a program to abort if
they are not explicitly caught (which passing a non-NULL error signifies
in this case)

Since this policy for NULL error pointers is stricter than the standard
GError convention, there is a clear note in the documentation to warn
developers that are used to using the GError api.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46)

Note: Since we can't change the Cogl 1.x api the patch was changed to
not rename _error_quark() functions to be _error_domain() functions and
although it's a bit ugly, instead of providing our own CoglError type
that's compatible with GError we simply #define CoglError to GError
unless Cogl is built with glib disabled.

Note: this patch does technically introduce an API break since it drops
the cogl_error_get_type() symbol generated by glib-mkenum (Since the
CoglError enum was replaced by a CoglSystemError enum) but for now we
are assuming that this will not affect anyone currently using the Cogl
API. If this does turn out to be a problem in practice then we would be
able to fix this my manually copying an implementation of
cogl_error_get_type() generated by glib-mkenum into a compatibility
source file and we could also define the original COGL_ERROR_ enums for
compatibility too.

Note: another minor concern with cherry-picking this patch to the 1.14
branch is that an api scanner would be lead to believe that some APIs
have changed, and for example the gobject-introspection parser which
understands the semantics of GError will not understand the semantics of
CoglError. We expect most people that have tried to use
gobject-introspection with Cogl already understand though that it is not
well suited to generating bindings of the Cogl api anyway and we aren't
aware or anyone depending on such bindings for apis involving GErrors.
(GnomeShell only makes very-very minimal use of Cogl via the gjs
bindings for the cogl_rectangle and cogl_color apis.)

The main reason we have cherry-picked this patch to the 1.14 branch
even given the above concerns is that without it it would become very
awkward for us to cherry-pick other beneficial patches from master.
2013-01-22 17:47:39 +00:00
Damien Lespiau
4bff97bb1d tests: Don't use g_test_verbose() as cogl doesn't use GTest anymore
But use cogl_test_verbose() instead.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 77efc7428d9ad18c2db1e3fdb544efa091249eaf)
2013-01-22 17:47:24 +00:00
Damien Lespiau
27fb294887 tests: Don't build test-journal with --disable-glib
test-journal needs cogl_glib_source_new() which is not available when
compiling cogl with --disable-glib.

Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 71fadbbfacad6a7c0ed7b06252d1e5e5dadf66f5)
2013-01-22 17:47:23 +00:00
Robert Bragg
69c6d50774 test-journal: Setup a UProf Mainloop timer
So that we can show a UProf profile when running test-journal the test
now declares a static "Mainloop" timer which it starts/stops around the
GLib mainloop it runs.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

(cherry picked from commit 66b3d23c201b2e7dd74602e6e6e6c2d8ead47bcd)
2012-09-03 15:51:45 +01:00
Neil Roberts
19ccb72b80 cogl-gles2-context: Wrap glCopyTex{Sub,}Image2D to flip the result
When the CoglGLES2Context is bound to read from a CoglOffscreen then
the result will be upside down from what GL expects if
glCopyTexImage2D is used directly. To fix that, this patch now wraps
glCopyTexImage2D and glCopyTexSubImage2D so that the copy is doing by
binding an FBO to the target texture and then rendering a quad
sampling from the texture in the offscreen framebuffer.

The rendering is done using the Cogl context rather than the GLES2
context because otherwise it would have to do a fair bit of work to
try and stash the old state on the context before setting up the state
to do the blit. The down side of this is that the contexts need to be
synchronized so that the rendering will be up-to-date. As far as I
understand from the GL spec, this requires a glFinish and then the
texture needs to be rebound in the new context because updates to
shared objects are guaranteed to be reflected until the object is
rebound.

GLES2 supports using glCopyTexImage2D for cube map textures. As Cogl
doesn't currently have support for cube maps, it is quite hard to get
that to work with this patch. For now attempts to copy to a cube map
texture will just be sliently ignored.

This patch also includes a test case which renders an image to the
framebuffer and then copies it to a texture. The texture is then
rendered back to the framebuffer and the contents are checked for the
correct orientation using glReadPixels.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 30b6da8134bad95267265e26685c7475f6c351c9)
2012-08-15 13:46:20 +01:00
Neil Roberts
d12399b823 test-gles2-context: Add a test case for rendering to an FBO
This adds an extra test to test-gles2-context which renders to an FBO
and then checks that the orientation is correct once the texture is
rendered via Cogl. This should test the code path to flip the GLES2
rendering in Cogl.

The rendering is done in three different ways to test the various
state that needs flipping:

• Just renders two triangle strips, one at the top and one at the
  bottom.

• Renders two full screen triangle strips, but each with a different
  viewport to clip it to the top or the bottom.

• Clears the screen with two different colors and a scissor to either
  the top or the bottom.

• Renders both quads twice with two different colors and two different
  front face states.

Additionally the rendering is verified by calling glReadPixels to
check that the returned pixels are flipped correctly.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 5b097f9bc4a3eb316c6bf0d9fe8db00ff93bfe73)
2012-08-15 13:44:16 +01:00
Neil Roberts
4c1b7c979d test-gles2-context: Fix error checking for cogl_gles2_context_new
The test was passing NULL as the error argument but then trying to use
the error object if it failed so it would just crash in that case.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 61cbbb3000fb4001d51999fd05179c620b7e56bf)
2012-08-14 18:55:42 +01:00
Neil Roberts
786d1b8e40 Split test-point-sprite into two, one without checking orientation
There is currently a known bug where when rendering offscreen point
sprites will be rendered upside-down. For that reason
test-point-sprite is marked as a known failure because it checks the
orientation of the point sprites and the conformance test suite is
rendered to offscreen buffers by default. However this doesn't help to
catch more general failures that stop the point sprites being rendered
at all. To fix this the test-point-sprite test has been split into two
tests, one which verifies the orientation and one which does not. The
two tests are in the same source file and internally share the same
static function but pass a flag to specify whether to check the
orientation. If the orientation should be ignored then it will create
a 2x1 texture instead of a 2x2 texture so that it will appear the same
regardless of whether it is upside-down. The checks for the colors
have been altered accordingly.

Reviewed-by: Robert Bragg <robert@linux.intel.com>

(cherry picked from commit 51b7fdbe17f300cf2edf42c2ca740ad748c9fd78)
2012-08-06 18:51:31 +01:00