This is better for memory management, and we'll see any errors this
way, which we may eventually want to do something with.
We need to make this change because gjs recently started checking
(allow-none) on callbacks.
Every place that called chrome.addActor was specifying
visibleInOverview:true, and no existing designs call for chrome that
disappears when you enter the overview, so just drop that as an
option.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
Due to lockdown settings or Polkit policy, shutdown may not be
available. If this is the case, the "Power off ..." action should
be hidden from the user status menu.
https://bugzilla.gnome.org/show_bug.cgi?id=652038
Sliding out the workspaces pager when starting a drag causes a lot
of motion. With the pager only hiding if workspaces are not used,
it is better to require to explicitly hover the workspaces sidebar
for the sliding.
https://bugzilla.gnome.org/show_bug.cgi?id=652730
Use the new PopupSwitchMenuItem functionality when bluetooth cannot
be enabled. Use it also for showing "connecting..." when activating
device items.
https://bugzilla.gnome.org/show_bug.cgi?id=648048
Moves and converts NMDeviceTitleMenuItem from network.js into
PopupSwitchMenuItem, so that it can show both a switch and a
greyed-out status label. This will be soon used by the Bluetooth menu.
https://bugzilla.gnome.org/show_bug.cgi?id=648048
_createNetworkItem was always appending access point at the end of
the menu when their position was < 5 (NUM_VISIBLE_NETWORKS), ignoring
the presence or absence of _overflowItem, which thus ended in the
middle of the network list. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=652313
After completing the overview transition, the workspace view is
clipped to avoid overlapping the search entry/view selector titles
while switching workspaces. For clipping, the view's position and
size was used, which works well assuming that the workspace pager
will start hidden or stay zoomed out while the overview is visible.
However, that assumption holds no longer true, as auto-hiding the
pager now depends on the number of workspaces, and thus may change
while in the overview. For instance, when starting with the pager
being visible, the clip area ends up being too small when moving
all windows to the first workspace (and thus triggering auto-hide).
As a fix, handle the clip rectangle separately from the view's
geometry, and set it always to the area the workspaces would
occupy with the pager hidden.
https://bugzilla.gnome.org/show_bug.cgi?id=653142
We call global.sync_pointer() on MetaScreen::restack as a hack to try
to fix up the hover state after a pointer grab. Previously we were
doing this in chrome.js, since there was already a ::restack handler
there anyway, but this isn't really related to the chrome at all, so
move it to main.js instead.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
This is better for memory management, and we'll see any errors this
way, which we may eventually want to do something with.
We need to make this change because gjs recently started checking
(allow-none) on callbacks.
Workspace thumbnails are supposed to be miniatures of the "real"
workspace they represent, but currently they show minimized windows
like the window picker.
Instead, hide minimized windows and track changes to update the
thumbnail accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=651569
With commit 59a3e393f9 whether the workspace pager should autohide
now depends on the number of workspaces. As we only track changes
to the number of workspaces while the overview is visible, we miss
changes in "normal mode", i.e. when creating a new workspace by
moving a window with ctrl-alt-shift-arrow; as a result, the pager's
autohiding might be incorrect when entering the overview after that.
As a fix, keep tracking changes to the workspaces when the overview
is hidden and update the zoom options.
https://bugzilla.gnome.org/show_bug.cgi?id=653078
Commit 429f809b7 fixed an exception in getDragActorSource(), but
the returned actor is only an approximation (e.g. in contrast to
the actual drag actor, it includes the label).
Try a bit harder to return the correct actor and only fall back to
the approximation when necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=645990
The purpose of autohiding the workspace pager on the right was to
avoid exposure of workspaces to users who are not using them.
However, for users who do use workspaces, the behavior limits the
purpose of the overview. To fix, always show the pager if more than
one workspace is actively used.
https://bugzilla.gnome.org/show_bug.cgi?id=652714
Using the list of stylesheets loaded with st_theme_load_stylesheet(),
one can build an StTheme that is completely identical to the previous
one, except for one property (application-stylesheet).
This allows rt and the user-theme extension to work while respecting
the theming of other extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=650971
Currently the user has to find an empty spot in the workspace
to be able to launcha new instance of an app using dnd.
This is unnecessary hard, so just allow dropping on windows too.
https://bugzilla.gnome.org/show_bug.cgi?id=652079
The screen panel in System Settings has a preference whether the
screen should be locked on suspend. This works fine when suspending
by closing the lid, but the "Suspend" menu item in the user status
menu ignores the setting and always locks the screen.
Fix by activating the screen saver before suspending rather than
locking explicitly.
https://bugzilla.gnome.org/show_bug.cgi?id=652327
As the Shell does more than observing channels (users can interact with them),
it has to be an Handler as well. We have to make sure that all the new
incoming text channels are handled by the Shell by default, so we make it an
Approver as well.
From an user point of view, the only difference is that Empathy's tray icon
will stop blicking when receiving new channels.
We rely on ChannelDispatcher.DelegateChannels() and PresentChannel() to
interact with Empathy. Those methods have been implemented in
telepathy-mission-control 5.9.0 and telepathy-glib 0.15.0.
If we have more than 5 (which can happen with VPN connections), place
them into a More... submenu, which also becomes scrollable if needed.
To protect from race conditions and ordering issues while reading
connections, sort them in alphabetic order when the timestamp is equal.
https://bugzilla.gnome.org/show_bug.cgi?id=651602
shell_global_get_memory_info() is a new function which extracts a few
global counters we have already, namely glibc's mallinfo, spidermonkey's
JSGC_BYTES, and gjs' counters for boxed/object/etc wrappers.
There is some slight overlap with perf; ultimately though I'd
like this function to do some more extensive analysis, so it wouldn't
be quite the same.
perf is going to be mainly concerned with how big the whole process
over time is; memory_info is for debugging memory leaks.
https://bugzilla.gnome.org/show_bug.cgi?id=650692
When timestamps or presence or alias changes were appended before,
the _history could grow unbounded, leaving behind an unfruitful chat
log of:
Jasper has gone offline.
Jasper has gone online.
Jasper has gone offline.
Jasper has gone online.
ad nausem.
https://bugzilla.gnome.org/show_bug.cgi?id=651086
Theme authors now have the power (and responsibility) of creating fade
effects with the new CSS length property '-st-fade-offset'. A value of
0 disables the effect.
This new CSS approach replaces the current programmatic toggle of
the 'vfade' property. A new CSS style class name 'vfade' is used as
a replacement for the old property.
https://bugzilla.gnome.org/show_bug.cgi?id=651813
Currently the workspace geometry is updated on zoom/allocation
changes, which means that newly added workspaces use their initial
geometry of (0, 0, 0, 0) until the next zoom change. As a result,
windows on the affected workspaces are mispositioned, e.g. placed
outside the workspace area. To fix, set the geometry on newly added
workspaces to the view's cached values.
https://bugzilla.gnome.org/show_bug.cgi?id=649001
Workspaces used to contain the desktop background, so when a
workspace was removed, we animated its actor to an off-screen
position before destroying it. As the background has been
removed a while ago, we can destroy the actor directly.
https://bugzilla.gnome.org/show_bug.cgi?id=645031
If the former is empty (default), only the extensions not contained in
the latter are loaded. Else, all extensions in the former that are
not contained in the latter are loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=651088
We should only show the trash can when the user starts dragging a
favorite from the dash, not when the user starts dragging an application
that happens to be a favorite via a window or an application icon
in the applications view.
https://bugzilla.gnome.org/show_bug.cgi?id=642895
Some users are confused when their devices are not shown in the
network menu, even if they configured them manually. Mark their presence
by showing them in the menu, even if they cannot be otherwise
interacted with.
Also add a status string for deactivating devices (none currently,
soon will appear in NetworkManager).
https://bugzilla.gnome.org/show_bug.cgi?id=646946
A new envrionment variable GNOME_SHELL_ENABLE_CLEANUP is added which
causes us to attempt freeing global data. The reason this isn't
enabled by default is that it's a waste of time at best, and at
worst in corner cases could cause crashes which would fill up
crash databases. Better to leave it as a developer-only tool.
Start stubbing out some cleanup in ShellGlobal.
https://bugzilla.gnome.org/show_bug.cgi?id=649517
Since both the hot corner's ClutterGroup and the hot corner's
ClutterRectangle button-release-event is connected to
_onCornerClicked() we must handle it there by returning 'true' to
Clutter or else _onCornerClicked() is called twice which defeats the
HOT_CORNER_ACTIVATION_TIMEOUT logic.
https://bugzilla.gnome.org/show_bug.cgi?id=649427
If you receive a message, a notification will appear. If you reply in
Empathy's chat window before the notification disappears, the
notification is updated with the contents of the message you *just*
sent! We should only update notifications if they're incoming.
https://bugzilla.gnome.org/show_bug.cgi?id=650219
Signed-off-by: Jonny Lamb <jonnylamb@gnome.org>
AltTabPopup was calling global.stage.get_actor_at_pos() "to force a
stage relayout", but that function does not actually have that effect.
It was also occasionally causing Clutter warnings (possibly due to a
clutter pick-buffer-caching bug?). So just remove the call.
https://bugzilla.gnome.org/show_bug.cgi?id=650317
Move some more environment-initializationy stuff from main.js to
environment.js, and be more careful about not importing shell JS
modules until after the environment has been fully patched.
Change gnome-shell-plugin to call Environment.init() before
Main.start(); this means that Environment.init() now runs before any
shell JS modules (besides environment itself) have been imported.
Make run-js-test create a ShellGlobal and use its js_context, so that
the shell_global_set_property_mutable() stuff in Environment.init()
will work correctly in tests as well.
https://bugzilla.gnome.org/show_bug.cgi?id=649203
The lg window was losing focus when the page with the entry got unmapped;
fix it to refocus itself after that.
Fixing this problem revealed that previously we were focusing the
entry on open(), but not ensuring that that page was selected, meaning
you could type into the entry without being able to see it. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=647303
The mouse-wheel zooming "easter egg" breaks horribly when you
drag a window, due to ugly lightbox reparenting tricks it uses.
For now, just end any zoom before we drag the window around.
https://bugzilla.gnome.org/show_bug.cgi?id=649632
All WPA APs were getting set as WPA2 due to the check for privacy;
WPA/WPA2 APs *must* set the Privacy bit according to the standard,
so we'd never end up in the case for NMAccessPointSecurity.WPA.
Fix that, and also add flags for WPA[2] Enterprise which we'll
use a bit later for the first-time connect case for 802.1x enabled
access points.
Instead of rolling our own code, use new libnm-glib functions to do
the same thing. Requires libnm-glib as of
779215c742bbe29a2c66202ec7e2e6d43edeb8ff (which will be part of 0.9).
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=648648
A "cosmetic" code arrangement I requested in code review resulted
in one too few items being removed from the queue for each incremental
chunk of icons added. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=648739
We used used to indicate to the user the ability to move to another workspace
during dnd by highligthing the adjacent workspaces on hover.
This was done by changing the workspace's opacity to 200 and set it to
255 for the highlighted adjacent ones.
This is now no longer needed as the design was completely changed since
then (overview relayout; we no longer represent workspaces in the way
we did before) and introduces a bug where we don't properly reset the
opacity after the drag action, so just remove that code.
https://bugzilla.gnome.org/show_bug.cgi?id=648983
If a user is fast and mouses over a window while the workspace thumbnail
animations are playing, it can be frustrating when the close button won't
appear at the end of the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=645848
The initial selection of the Alt+Tab dialog was happening before the
dialog was shown and allocated, and so the "do we need to scroll"
check used bogus coordinates. Fix by showing the dialog (and forcing
an allocation) first.
https://bugzilla.gnome.org/show_bug.cgi?id=647807
Previously, we skipped rebuilding device items in case the device
had already been seen, but this caused the connected switch not to
be updated. Now it has been refactored to update in case the device
changes, and to create only when the device is completely new.
https://bugzilla.gnome.org/show_bug.cgi?id=647565
Connect to button-press-event on the menu item actor, not on the
slider, so any part that is highlighted is also clicked. This means
that click on the left of the volume slider is a rapid way to mute.
https://bugzilla.gnome.org/show_bug.cgi?id=646660
Adds a function that compares wireless networks and keeps them sorted
at all times. Order is: first already configured connections, then
first secure networks, then alphabtic. Also, the appearance of a new access
point no longer causes the whole menu to be rebuilt (but it still linear
searches for the position, I guess that could be skipped), which caused
the addition of more code for tracking the active access point.
https://bugzilla.gnome.org/show_bug.cgi?id=646580
Rename a few Panel fields and add a _statusArea object pointing to the
status area PanelButton objects. You can now address each item
consistently from lg:
Main.panel._activities
Main.panel._appMenu
Main.panel._dateMenu
Main.panel._statusArea.a11y
Main.panel._statusArea.volume ...
Main.panel._userMenu
https://bugzilla.gnome.org/show_bug.cgi?id=646915
If a JS object has an 'actor' property pointing to a ClutterActor,
include the actor's toString() output in the delegate's toString()
output. Eg:
js>>> Main.panel
[object Object delegate for 0xff6080 StBoxLayout.menu-bar "panel" ("Activities")]
https://bugzilla.gnome.org/show_bug.cgi?id=646919
To keep the app icon from overlapping the panel's (border-image)
border, a custom property for clipping the app menu icon's bottom
was introduced. But if the clip region is set before the initial
icon is set, the entire actor ends up clipped. Also due to the double
meaning of clutter_actor_get_height() (e.g. preferred height versus
allocated height), the clip region may end up too large and the icon
overlaps the panel's border-image.
Fix both problems by updating the clip region on size changes as
well, rather than on style changes only.
https://bugzilla.gnome.org/show_bug.cgi?id=644122
The IP_CHECK and SECONDARIES states should be considered part of the
"connecting..." phase.
DEACTIVATING should be its own stage, but that would break string
freeze, so we just treat it like DISCONNECTED for now.
UNMANAGED needs to be treated differently in 3.2, but it is too late
to fix it for 3.0.1.
https://bugzilla.gnome.org/show_bug.cgi?id=646946
Alt+Tab's special case of "switch to the most-recently-used window even if
it's in the same app" is actually an hindrance for users to get a firm mental
model of Alt+Tab. Now that we have Alt+Above_Tab the special case is no longer
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=647907
Currently, the banner text is always located at the right of the
title - we need to swap those around for RTL locales. Rather than
using the locale directly to figure out the ordering, try to
determine the direction of the title label and let it control the
overall direction of the notification - this way, notifications
generally come out right when mixing scripts.
https://bugzilla.gnome.org/show_bug.cgi?id=646921
In the current implementation of the search entry, when replacing a
selected search term with another term, the first character of the
replacement is prepended to the hint text rather than starting a new
search. This fix makes sure that the focus is not lost when changing
the selected search term.
https://bugzilla.gnome.org/show_bug.cgi?id=636341
When updating search results, the current result set is
recreated from scratch before setting the selection
highlight. This results in two style changes of the selected
item, and as a CSS transition is used to animate the style
change, the selected item flickers if it remains the same as
with the previous search term.
Fix by hiding the result set until the selection is set, to
avoid the transition in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=646019
The addition of _backgroundStack to ModalDialog broke focus
navigation, because it was interposed between the focus group root and
all of the interesting content, but since it isn't an StWidget,
st_widget_navigate_focus() was unable to navigate through it. Fix this
by moving the focus root to this._dialogLayout (inside the
_backgroundStack) instead.
Additionally, in EndSessionDialog specifically, _initialKeyFocus
wasn't being set until after opening the dialog, so it was ignored.
Also change ModalDialog.close() to clear the _savedKeyFocus that
popModal() set, so that dialogs that are repeatedly closed and
reopened will have their focus revert back to _initialKeyFocus each
time.
https://bugzilla.gnome.org/show_bug.cgi?id=646740
The icon set as secondary icon of the search entry depends on whether
a search is active or not - clicking the icon should reset the entry
only in the former case. This is implemented by connecting/disconnecting
the 'secondary-icon-clicked' signal when updating the icon, but an
additional signal connection was left-over when refactoring the search
entry, resulting in clicks on the inactive icon removing the hint text.
Fix by removing the stray signal connection.
https://bugzilla.gnome.org/show_bug.cgi?id=646855
The change to StTextureCache for bug 644142 broke lg's inspector icon,
which was not specifying St.IconType.FULLCOLOR, but was relying on the
fact that SYMBOLIC (the default) would fall back to it. Fix the icon
by specifying FULLCOLOR explicitly.
(We should probably be using a symbolic icon here, but there is no
available icon with a select/pick/point-to/etc kind of meaning.)
https://bugzilla.gnome.org/show_bug.cgi?id=646451
When more than one device exists, we need to reset the section title's
device to null, and in that case we must show nothing (neither the switch
nor the label, but an empty label is OK anyway). Also, we need to
update the device statusItem immediately when constructing it, as we
may not get any state-changed.
https://bugzilla.gnome.org/show_bug.cgi?id=646074
NMDeviceModem._createSection was not checking whether it should have
shown the connection list, resulting in status item shown even if
the device was in an invalid state.
Also, fix a logic error when creating the operatorItem and fix overriding
_clearSection protected method.
https://bugzilla.gnome.org/show_bug.cgi?id=646395
NMApplet connects to each NMDevice's state-changed signal and stores
the signal handler id on the NMDevice itself. However, it was using
the same name as NMDevice itself was using to store the handler ID for
the underlying GObject's state-changed signal, thus overwriting it,
and resulting in *neither* signal handler getting removed if the
device went away. (This probably isn't a problem, since the device is
going away, but it causes a warning.)
Also, at least for WWAN devices, the device state changes to UNMANAGED
immediately before disappearing, but getStatusLabel() wasn't handling
that case and printed a warning instead. Fix that.
https://bugzilla.gnome.org/show_bug.cgi?id=646708
If you restart NetworkManager, then the list of active connections
is emptied, then comes back with the same GObjects in it. If the
_primaryDevice field isn't cleared on the object, then we won't
know we need to set it back on the device, resulting in the active
device not showing up in the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=646558
A notify signal does not include the new value of the property in
its signature, so the handler was trying to compare a GParamSpec with
a number when updating. Fix it to always retrieve the value from the
object.
https://bugzilla.gnome.org/show_bug.cgi?id=646443
ViewByCategories._removeAll clears the sections, but the filter passed
to view still expects them to exists. Therefore, refresh the view
after the section has been rebuilt and the All filter reapplied.
https://bugzilla.gnome.org/show_bug.cgi?id=645801
Right now, the network menu will overflow the screen if More...
is selected with many access points. As a short-term workaround
for this, add a scrollbar for submenus of panel dropdown menus
if they would cause the toplevel menu to overflow the screen.
- Put the actors in a PopupSubMenu in a StScrollView so we get
a scrollbar if the allocated space is smaller than the height
of the menu. Expand animation is turned off in the scrolled case
to avoid weirdness.
- When we pop up a panel menu, set a max-height style property
on the panel menu to limit it to the height of the screen.
- Hack event handling while the scrollbar is dragged to make
the scrollbar work properly.
https://bugzilla.gnome.org/show_bug.cgi?id=646001
Since the icon area is end-aligned, the signal strength icon for
insecure networks was ending up aligned with the lock icon for secure
networks. Fix that by always including a _secureIcon, but having it be
blank for the insecure networks.
https://bugzilla.gnome.org/show_bug.cgi?id=646121
Adding correct annotations to Gio.File.load_contents revealed that gjs
doesn't actually support array+length combinations. For 3.0 this would
be invasive to fix, so add a method to ShellGlobal which does what
we need.
https://bugzilla.gnome.org/show_bug.cgi?id=646333
Figuring out the size of an unmapped actor is not completely
reliable because styles aren't fully assigned until an actor
is mapped. So show the submenu before computing the size we
want to tween to.
https://bugzilla.gnome.org/show_bug.cgi?id=645949
Some connection types (like wimax) are not supported by the menu, and
should be ignored instead of throwing exceptions. Also, NetworkManager
had a bug that sent connections with invalid settings. This should not
happen, but in case it does, we will not blow up, but just log a warning
and continue silently.
https://bugzilla.gnome.org/show_bug.cgi?id=646355
When a device is connecting, we can continue showing available
connections and access points, as well as the active one with the dot.
(Hiding was a remnant of when the device status was on a different
menu item than the title)
https://bugzilla.gnome.org/show_bug.cgi?id=646381
A cosmetic change recommended in review of the patch to fix the
VPN Connections switch ended up introducing a logic error that
made the switch not work properly. Fix.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
It was always reporting true, even if disconnected. At the same time,
add a signal that is emitted when state changes and update the UI
accordingly.
In the future (with another libnm-glib API break) we should use the
NMVPNConnection object to track the connection state, so that we can
show if we're connecting or we need authentication.
https://bugzilla.gnome.org/show_bug.cgi?id=646380
NMDevice._findConnection expects an uuid as parameter, but
checkConnection was passing a NMConnection object. This caused
exists to be always false, thus the connection was added again every
time the 'updated' signal was emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=645702
When a source has an associated tray icon, we would forward all clicks
to the X11 window, meaning that the summary notification could not
be opened. Instead, restore normal event flow for clicks, when the
source has notifications in the queue.
https://bugzilla.gnome.org/show_bug.cgi?id=645753
Since the opacity of the application menu is controlled by
it's _targetIsCurrent flag, we need to respect that when entering
and leaving the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=645734
Sometimes, log messages are hard to differentiate from normal,
unread recent messages, so give a separate style to messages
retrieved from the TelepathyLogger service.
https://bugzilla.gnome.org/show_bug.cgi?id=645609
If we have a date that's not within the last week, it's really
confusing to display it as "Sent at 9:23 on Tuesday". Steal
some strings from calendar.js for displaying older dates to
avoid a string-freeze break.
https://bugzilla.gnome.org/show_bug.cgi?id=645609
This ensures that we don't show a small black blob fading away
when the user clicks on the notification and it is removed.
Set HIDING state right away in _hideSummaryBoxPointer() so that
it is only called once. Update this._pointerInTray when the tray
is unlocked, so that we are not dependent on escapeTray() being
triggered by 'done-displaying-content' signal.
https://bugzilla.gnome.org/show_bug.cgi?id=645697
Use Meta.later_add() with BEFORE_REDRAW rather than Mainloop.idle_add()
to add the banner body so that the notification body is reliably added
after the first frame is drawn. This is important for notifications that
are expanded right away, such as the summary notifications that
were not shown as banners because the user was in the Busy mode or was
interacting with the summary. Otherwise, these notifications were sometimes
shown with an ellipsized banner and were only getting full content when
they were done animating.
Only add expanded content and signal the change once. Previously, we
used to signal the change numerous times and processing this signal was
holding up processing other things, such as the user moving the mouse
away from the notification so that the notification collapses.
https://bugzilla.gnome.org/show_bug.cgi?id=645719
Since the hotcorner is a reactive actor, and it is over the Activities
button, hovering on it results in a leave-event for the button.
This is not noticeable when opening the overview, as the button is
correctly prelighted, but it is when closing, if you keep the mouse
near the hot corner, as the button is kept in normal state, despite
the mouse being over it.
https://bugzilla.gnome.org/show_bug.cgi?id=645751
Instead of setting the x/y position of the box pointer, which results
in a long change of workarounds for limitations of the Clutter
layout system, set the anchor point instead, which takes the
positioning out of the layout system.
The position is computed as a combination of the position computed
from the allocation and the box pointer's size, and an offset that
we tween when animating showing and hiding the box pointer.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
Using ClutterActor.get_transformed_size() can produce bugs if we
happen to position the box pointer when the source actor has a
relayout queued. Use our newly added reliable utility function
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=645744
Commit 31b12635d1 fixed links in notifications again, but blocked
clicks on normal labels getting through to the notification. Fix
this, so that both links and dismissing notifications work again.
https://bugzilla.gnome.org/show_bug.cgi?id=645839
Add a translator comment for the "Sorry, that didn't work. Please try
again." string, as suggested by several people; this should help
translators what "that" refers to.
As a stop-gap measure until we have a native input method tray icon,
add ibus-ui-gtk to STANDARD_TRAY_ICON_IMPLEMENTATIONS so that the IBus
status icon shows up in the status area rather than in the message
tray. The message tray location doesn't work for the function of
showing the current input method when switching between windows or
changing input methods.
https://bugzilla.gnome.org/show_bug.cgi?id=641531
StThemeNode.get_length() doesn't necessarily return an integer pixel
value, and our code produces non-integer positions in that case. So
round the spacing.
https://bugzilla.gnome.org/show_bug.cgi?id=645647
Because of the GtkSizeGroup-like trickiness we're doing with
PopupMenuItems, we need to force Clutter to discard its cached size
requests for them any time the menu itself changes size.
https://bugzilla.gnome.org/show_bug.cgi?id=645647
If the BoxPointer changes size (eg, when opening the "More" section of
the network menu), reposition it to make sure it's still aligned
correctly and still completely on-screen.
This is not the right fix for this problem (and causes the menu to be
drawn in the wrong position for one frame). The right fix would
involve a ClutterConstraint, but that would be more invasive, and can
happen post-3.0.0.
https://bugzilla.gnome.org/show_bug.cgi?id=645647
The change to make Notification an StButton (06d2c0af, bug 642978)
broke links, because the link actor would ignore the
button-press-event, allowing the notification actor to receive it and
get a pointer grab, and so the link actor would never see the
button-release-event. Fix that by accepting and discarding the
button-press-event.
https://bugzilla.gnome.org/show_bug.cgi?id=645613
The chat-history-fill-in code had logic to avoid appending two
messages when a message appeared in both the log and the pending
messages. But it wasn't working because of an incorrect object field
name.
Additionally, the code was previously keeping the copy of the message
from the log, and suppressing the copy from pending. But that meant
that once the previous bug was fixed, it would think it had only shown
old messages, and so it would create a source but not notify it. So
fix it to suppress the log message and show the pending message.
https://bugzilla.gnome.org/show_bug.cgi?id=645612
For wired devices (actually, ethernet devices), hide the connection
list when there is only one connection (either automatic or stored).
The device can be operated with the associated switch.
Since device state Unavailable is generic and has substates, instead
of using an hack for carrier, introduce some code that checks both
for carrier and firmware-missing when in that device state, and updates
the UI accordingly.
If a notification was updated while one of its widgets was focused,
it would lose the grab when that widget was destroyed. Fix that by
moving the focus to a safe place before destroying the old widgets.
https://bugzilla.gnome.org/show_bug.cgi?id=643687
We want to minimize focus stealing from the user. If a non-urgent notification
comes in while the user is interacting with the tray, we add it to the tray
and only show it after the user is done interacting with the tray. If an
urgent notification comes in while the user is interacting with the tray,
we hide the tray and show the urgent notification.
https://bugzilla.gnome.org/show_bug.cgi?id=636838
We want to allow the user to scroll through all notifications from
source by using a single scrollbar. We suppress the individual
scrollbars inside the notifications.
As one exception, we keep the original scrollbar for chat notifications
because it has a distinct look, ending above the text entry box.
https://bugzilla.gnome.org/show_bug.cgi?id=611611
Change the way menu items allocate their contents to take text
direction into account, so they're fully reversed in RTL locales,
and St.Align.START / END are respected.
https://bugzilla.gnome.org/show_bug.cgi?id=645524
While we have menu for an app icon open, we want to show the prelight
for the item instead of removing the prelight when the user mouses
away from the item and into the menu, and if there's a tooltip
(like for the dash), we want to show the tooltip immediately when
the menu is popped up.
https://bugzilla.gnome.org/show_bug.cgi?id=642871
It can be useful to avoid sending enter/leave events to the source actor
of a menu: this would be the case when the source actor isn't a menu item
that should participate in menu navigation but rather is some object
(like an app icon) that we want to indicate corresponds to the menu.
https://bugzilla.gnome.org/show_bug.cgi?id=642871
Inside the Shell, all the UI (including chrome, the overview, and
the actual windows) is not a child of the stage but of a special
ClutterGroup, which is cloned inside the magnifier.
Add function for setting this special actor so that actors added by
St are visible in the magnifier. Nothing yet uses this, but the
tooltip will soon.
https://bugzilla.gnome.org/show_bug.cgi?id=635100
We need to update WorkspacesView._ZoomOut before calling
_updateWorkspacesGeometry() in show(), as otherwise the old
value is kept. This was a problem if we previously left the
overview zoomed out.
The applications have to have a way of keeping resident notifications
updated without unnecessarily notifying the user with the information
the user is already seeing in the application window.
https://bugzilla.gnome.org/show_bug.cgi?id=630847
Make summary sources look more clickable and highlight them when selected.
Highlighting the fully expanded summary source when selected matches the
highlighting in the top bar items and teaches the user that any part of the
expanded summary source can be clicked.
Based on the initial patches by Florian Müllner and Jonathan Strander.
https://bugzilla.gnome.org/show_bug.cgi?id=644788
The lightbox will be sized to the size of its parent container,
so we need to make the parent container reliably the size of the
stage, instead of letting it be auto-sized to the size of its contents.
https://bugzilla.gnome.org/show_bug.cgi?id=644889
Returning true from the event handler seems to avoid getting
duplicate return events; these duplicate events likely are
getting generated by IBus.
https://bugzilla.gnome.org/show_bug.cgi?id=644509
Currently activating a window on a different workspace requires very
long drag distances, which is very inconvenient to use.
Fix that by allowing switching workspaces using the thumbnails which is
consistent with window and launcher dnd and much easier to use.
https://bugzilla.gnome.org/show_bug.cgi?id=643945
Don't do an individual hover fixup for every window overlay, instead
just use the new global.sync_hover() to fix up hovers once we have
finished showing the overview.
Based on a patch from Adel Gadllah <adel.gadllah@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=638613
Main._nWorkspacesChanged was racing with Main._checkWorkspaces.
If _checkWorkspaces won the race, _workspaces was uninitialized.
Because of this, _checkWorkspaces only noticed workspaces
with windows on them, leading it to believe the last workspace wasn't
empty, and added a new, empty workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=645343
In the case where the original actor is destroyed, we don't
show a snap back animation, so we need to destroy drag actor
as we would do in _onAnimationComplete.
https://bugzilla.gnome.org/show_bug.cgi?id=640781
If you have XFixes 5 (and corresponding xserver support) then we
add barriers on the panel and in the message tray corner so that
its easy to reach the corners even when there are monitors to the
sides of the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=622655
If the user clicks a trayicon in the overview, drop out of the
overview before passing the click on to the icon. (We have to actually
wait for the overview animation to complete, in case the icon wants to
get a pointer grab, which it would not be able to do with the overview
active.)
https://bugzilla.gnome.org/show_bug.cgi?id=641853
If the pointer moves on or off the stage while another process has a
grab, we will lose track of it. One example of this is that if you use
a popup menu from a message tray trayicon, the tray will stay up after
the menu goes away, because the shell never saw the pointer leave it.
Add a new method shell_global_sync_pointer() that causes clutter to
recheck what actor is under the pointer and generate leave/enter
events if appropriate.
Of course, we can't actually tell for sure when another process has a
grab, so we need a heuristic of when to call this. Currently we call
it from Chrome._windowsRestacked(), which is not really the right
thing at all, but does fix the menu-from-trayicon case...
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If the user clicks on the title of a trayicon's SummaryItem, forward
that click to the trayicon. Also adjust
gnome_shell_plugin_xevent_filter() so that if the trayicon takes a
grab as a result of this, we don't hide the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=630842
If you run a command from Alt+F2 that tries to get a server grab (eg,
xmag), it will fail if it starts up before the run dialog is finished
hiding.
Additionally, the run dialog currently stays focused while it is
fading out, potentially stealing keystrokes (or causing the user to
accidentally launch two copies of a program).
Change ModalDialog.close() to call popModal() immediately
Add a ModalDialog.popModal method, and call that before running the
RunDialog command. If the command succeeds, close the dialog as
before. If it fails, call ModalDialog.pushModal() to put things back
to normal before displaying the error.
https://bugzilla.gnome.org/show_bug.cgi?id=644857
When right-clicking on an AppWellIcon, the icon will become focused,
which (presumably via style-changed) invalidates its current
allocation, causing "icon.y" to return 0 until it has been
reallocated, messing up our idea of where in the AppDisplay the icon
is. Work around this by calling get_allocation_box() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=645162
If there is a monitor to the right it is very easy to overshot the
expanding thumbnails and enter the next monitor. So, in that case
we just always show it.
https://bugzilla.gnome.org/show_bug.cgi?id=641877
Specify x-fill and y-fill true for the bin that contains the status
icon so the status icon will always be sized to our specified icon
size (24x24). This prevents pathological behavior for legacy status
icons embedded in the tray where an initial allocation at 1x1 before
they had content would "stick", and the icon would permanently
end up 1x1.
https://bugzilla.gnome.org/show_bug.cgi?id=634820
Right now, the user status menu always contains actions to logout
and lock the screen, and the user switching action only depends on
the technical availability of the functionality.
All those items should honor the lockdown settings defined in
org.gnome.desktop.lockdown.
https://bugzilla.gnome.org/show_bug.cgi?id=645335
To avoid having hot corners that accidentally trigger when e.g. trying
to hit the panel on the primary monitor we add hot corners only to
monitors that are "naturally" top left (top right for RTL).
For instance, we'd like a hot corner here:
corner -> +-------------
| |
+---------+ |
|=========| |
| | |
| | |
| | |
+---------+------------+
But not here:
unexpected hot corner
↓
+---------+-------+
|=========| |
| | |
| +-------+
+---------+
https://bugzilla.gnome.org/show_bug.cgi?id=645116
The fade effect when switching tabs should only be applied when
switching from a previously selected tab, not when selecting the
initial one - otherwise, the window previews are faded in the first
time the overview is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=644389
When we were knocking off workspace height to fix the ratio problems, we
weren't adding spacing in between workspaces, so they smooshed up against
each other whenever we took height off, causing them to be visible.
Different methos are being used to launch the control-center panels of each
status icon. Standarize on Shell.AppSystem.
This also fixes the network icon using a non-existant Util.spawnDesktop()
method.
Bug #645091
Commit fcfd17e was overzealous when simplifying the previous spinner
animation, as a result the spinner now stays around when switching
to another application while the animation is ongoing.
If a workspace becomes empty due to a window changing to/from the
primary monitor, but not changing its original workspace then we
were not noticing this. This can happen for instance if you drag
a thumbnail window to a non-primary window.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We clip the entire WorkspacesDisplay to its allocation to avoid things
like the WorkspaceThumbnails sticking out of the primary monitor into
another monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We used to do this only on automatic workspace switch, but that
doesn't work for the multiple monitors case where we want to reserve
space on the extra monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
We create a Workspace with a null metaWorkspace for each
non-primary monitor, showing the windows on these monitors.
These are saved in WorkspaceView.extraWorkspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
This means a bunch of windows will not be visible at all in the overview.
Those will be added back with per-screen workspaces on the non-primary
monitors.
https://bugzilla.gnome.org/show_bug.cgi?id=609258
Notification was connecting to button-release-event to decide when to
be dismissed, which caused problems with widgets inside the
notification that reacted to button-press-event but not
button-release-event. Fix this by wrapping the Notification's table in
an StButton and connecting to 'click'.
https://bugzilla.gnome.org/show_bug.cgi?id=642978
In commit 9bd22dc0, I introduced an API to load an arbitrary
.desktop file, not necessarily from the menu path. It turns
out this function was broken because it created ShellApp instances
that were *different* from ones that were cached normally.
As far as I can tell, we didn't initially use it. Then later
Util.spawnDesktop was created which used this function.
Remove this broken function and all callers; if we're loading
.desktop files from *outside* the menu path, we can look at
readding.
This patch also kills off Util.spawnDesktop in favor of callers
talking to ShellAppSystem directly, now that the latter reports
errors.
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Move the "system notification error" handling out of
util.js, and add it to ShellGlobal so we can start
calling it from across the codebase better (including
C).
https://bugzilla.gnome.org/show_bug.cgi?id=644402
Simplify the accounting of which windows we should dim by checking
the current state of windows rather than trying to track changes,
and by keeping a list of dimmed windows rather than a list of windows
with a dimmed parent. Remove windows from the list of dimmed windows
when they are destroyed.
This should fix problems where destroyed windows could end up in
the list of dimmed windows.
https://bugzilla.gnome.org/show_bug.cgi?id=644167
Adds an implementation of nm-applet in javascript. Uses the new
introspection from NetworkManager, and temporarily requires
nm-applet to be running for the secret service.
Features a renewed interface, with each device controllable through
a switch, which if toggled off disconnects, and if toggled on
connects to the most recently used valid connection. More esoteric
features like creation of ad-hoc networks have been moved to the
control center panel.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Inside the inner loop, use the inner iterator, not that of the outer
loop. At the same time, refactor the code to rely less on private
properties appended to foreign objects.
https://bugzilla.gnome.org/show_bug.cgi?id=644858
The polkit authentication dialog contains logic for
falling back to dispalying a user's username if that
user has no real name.
This logic is no longer needed because gdmuser does it
internally now.
https://bugzilla.gnome.org/show_bug.cgi?id=644765
Commit 0207f1f29b landed a new
way of zooming, but was causing all sorts of window positioning
weirdness because the positions were supposed to be working against
a proportional workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=644542
Do a basic job of converting font sizes from pixels to points, so they
will scale will the global GNOME scale factor. Some other sizes that are
clearly related to the font sizes are changed to ems, but no comprehensive
attempt is made to get rid of px units.
https://bugzilla.gnome.org/show_bug.cgi?id=636868
During application startup, we used to display a rotating spinner
which also moved from left to right, revealing the application title.
The result looks rather busy, so remove the horizontal movement.
https://bugzilla.gnome.org/show_bug.cgi?id=640782
Update the Source title when an contact's alias changes, and
also also add a minor meta message like the current timestamps.
Updating the alias of a 'presenced' contact will overwrite the
current title, and it will also not update the summary item title
right now due to limitations of the message tray.
https://bugzilla.gnome.org/show_bug.cgi?id=642793
WorkspacesDisplay removes its dragMonitor in _dragEnd, but
this was never called in when a xdnd drag ended causing
dragMonitors to stack up and handling events multiple times.
Fix that by making sure that _dragEnd is called when xdnd ends.
https://bugzilla.gnome.org/show_bug.cgi?id=644642
Monkey-patch Date.prototype.toLocaleFormat() with a version that uses
g_date_time_format() since the Spidermonkey built-in can't handle
format strings with Unicode characters.
https://bugzilla.gnome.org/show_bug.cgi?id=643350
If we don't update every second, we may show the wrong time for up to
a minute on 1. resume; or 2. when changing the time; or 3. when
changing the timezone. This is both annoying and and leads to people
thinking that the tool for changing the time / timezone is broken.
https://bugzilla.gnome.org/show_bug.cgi?id=635840
Signed-off-by: David Zeuthen <davidz@redhat.com>
The mockups are here
https://live.gnome.org/GnomeShell/Design/Whiteboards/AuthorizationDialog
Detailed changes
- Don't use an icon for root
- For root, show Administrator in red
- Nuke icons for info and error messages
- Make error messages yellow
- Use 10pt size for error and message labels, not 12px
- Don't make the dialog change size when (single-line) error/info
messages appear
- Spacing fixes
- Show "Sorry, that didn't work. Please try again" if authentication fails
- Don't cancel the PolkitAgentSession if the session has already completed
https://bugzilla.gnome.org/show_bug.cgi?id=644737
Signed-off-by: David Zeuthen <davidz@redhat.com>
In the mockups the slider does not have an uniform color but uses
one color (shade of blue) to indicate the current value and one
to indicate "the rest" (shade of grey).
So adjust the slider to look like that to be closer to the look
in the mockups and thus to the design.
https://bugzilla.gnome.org/show_bug.cgi?id=644600
GJS complains when a NaN is passed in place of an integer, and
parseInt returns that from non numeric string. Pass a sentinel
that cancels the operation in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=642978
Around 2.91.90, gnome-session-save was renamed to gnome-session-quit.
This commit restores compatibility with the older gnome-session, for
those testing under GNOME 2.32 or below, by calling the DBus methods
directly.
https://bugzilla.gnome.org/show_bug.cgi?id=644591
Add the idea of an 'id' for a tab, and add a public switchTab method
so you can switch to 'applications' or 'windows'. This will be useful
for performance tests that test tab switching performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644266
* Run gnome-shell-perf-helper during performance tests
* Use MUTTER_WM_CLASS_FILTER to omit all other windows
* Add new Scripting methods: createTestWindow,
waitTestWindows, destroyTestWindows
* Create a single 640x480 test window for testing overview
animation performance.
https://bugzilla.gnome.org/show_bug.cgi?id=644265
Don't enter the overview at startup, or when we we remove the
last window on the first workspace, but only when we remove a
workspace and there are windows on the other workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=644541
When new messages come in we want to scroll down so that the user
sees the incoming messages. The current implementation does not work
because it relies on a synchronous allocation hack which does not work
for unmapped notifications.
Fix that by connecting to adjustment::changed and scroll whenever the
adjustment changes which equals "new messages", "new timestamp" or
"presense change", but don't interference with the user's scroll actions
i.e when the user scrolls back to read something don't scroll to the bottom.
https://bugzilla.gnome.org/show_bug.cgi?id=614977
Remove the hack from Notification.scrollTo because it is unreliable,
the caller should make sure to call scrollTo when it will actually
have the desired effect.
https://bugzilla.gnome.org/show_bug.cgi?id=614977
If we're dragging a window around and we need to reposition the windows,
due to e.g. the sliding in of the thumbnails or some other reason, then we
need to consider the original position of the dragged window, rather than
the currend drag position. Otherwise we will unnecessarily rearrange the
other windows for instance on snap-back if you moved the dragged window
past some other window.
https://bugzilla.gnome.org/show_bug.cgi?id=643786
We currently show the workspace in the overview in a rectangle
with the same aspect ratio as the screen. Originally this was
probably done since it showed the desktop, but we don't do this
anymore, and the positioning of the windows in the overview is
strictly a grid, so its not in any way related to monitor geometry.
Additionally, in the multihead case the screen aspect ratio is
very different from the overview monitor geometry, so a lot of
space is lost.
So, instead we just fill the entire inner rectangle of the overview
with the workspace. However, the way the zoom into and out of the
workspace right now is by scaling the workspace so that it covers
the entire monitor. This cannot really work anymore when the workspace
is a different aspect ratio. Furthermore the coordinates of the
window clone actors are of two very different types in the "original
window" case and the "window in a slot case". One is screen relative,
the other is workspace relative. This makes it very hard to compute
the cost of window motion distance in computeWindowMotion.
In order to handle this we change the way workspace actor positioning
and scaling work. All workspace window clone actors are stored in
true screen coordingates, both the original window positions and the
in-a-slot ones. Global scaling of the workspace is never done, we
just reposition everything in both the initial zoom and when the
controls appear from the side.
There is one issue in the initial and final animations, which is that
the clip region we normally have for the workspacesView will limit the
animation of the clones to/from the original positions, so we disable
the clip region during these animations.
https://bugzilla.gnome.org/show_bug.cgi?id=643786
