border artifacts
* clutter/cogl/gl/cogl-texture.c: Set the wrap mode of a texture
on demand
Instead of setting the wrap mode once per texture at creation, it
is now changed whenever the texture is drawn. The previous value
is cached so that it isn't changed if the value is the same.
This is used in _cogl_texture_quad_hw to only enable GL_REPEAT
mode when the coordinates are not in the range [0,1]. Otherwise it
can pull in pixels from the other edge when the texture is
rendered off-pixel.
Most cards don't actually support GL_QUADS and they are deprecated in
GL 3.0 so there is a chance it will perform faster with GL_TRIANGLES
even though it has to submit two extra vertices.
The glyphs are queued into an array of rectangles instead of being
drawn directly. Whenever a different texture is used or the sequence
is complete the array is flushed.
This is based on a patch from Owen Taylor.
This takes an array of sets of 8 floats to describe the rectangles. It
tries to send the geometry with a single glDrawArrays as far as
possible. cogl_texture_rectangle is now just a wrapper around
cogl_texture_multiple_rectangles.
cogl_texture_quad_hw and _sw now just add vertices to the vertex
array. The last texture used is stored and if a different texture is
encountered then flushes the vertices. cogl_texture_rectangle always
flushes the vertices after calling either of the functions.
the test for whether to use hardware tiling. Previously it assumed
that texture coordinates are in increasing order but this is not
the case since bug 1057 was fixed. The texture coordinates are now
sorted later. It also allowed negative coordinates which doesn't
make sense if the texture has waste.
timelines are more than 52 and continue to remove them
* clutter/clutter-score.c (traverse_children): Don't destroy the
entry in the handler for REMOVE_BY_ID. It will be removed again
anyway in the call to g_node_traverse. This was causing a
crash. Thanks to zhangwei for spotting.
`_glDrawRangeElements@24'
Resolve glDrawRangeElements with cogl_get_proc_address instead of
calling it directly because functions defined in GL > 1.1 are not
directly exported under Windows.
* clutter/cogl/common/cogl-mesh.c: Use the function pointer from
the context
* clutter/cogl/gl/cogl-context.c (cogl_create_context): Initialise
function pointer.
* clutter/cogl/gl/cogl-context.h (CoglContext): Add a function
pointer
* clutter/cogl/gl/cogl-defines.h.in: Add a typedef for the
function pointer.
* clutter/cogl/gl/cogl.c (_cogl_features_init): Resolve
glDrawRangeElements
fault in trunk and incorrect appearance in clutter-0.8
* clutter/clutter-score.c (start_children_entries): Check whether
the child timeline is actually attached at a marker before
comparing whether the marker's name matches the marker
reached. This fixes a crash that happens when a marker is reached
on a timeline that also has child timelines attached at the
end. Thanks to zhangwei for spotting.
* clutter/clutter-actor.c:
(clutter_actor_set_property): Add sanity checks for NULL
boxed values when setting the rotation center.
* tests/interactive/test-animation.c:
(on_button_press): Add an example on how to use the rotation
properties to animate an actor.
* tests/interactive/test-pixmap.c (create_pixmap): Use a format
string instead of passing the error message directly to g_error.
* tests/interactive/test-easing.c (test_easing_main)
(on_button_press):
* tests/interactive/test-animation.c (on_button_press): Use
unsigned variables for the results from clutter_actor_get_size
otherwise it complains about the pointer signedness being
different.
* clutter/clutter-script.c (clutter_script_add_search_paths): Use
G_GSIZE_FORMAT instead of %d for a gsize parameter otherwise it
gets upset on 64-bit.
differences and improve maintainability.
* clutter/cogl/gl/cogl-context.h:
Adds a CoglTextureGLVertex typedef + texture_vertices and
texture_vertices_size members to CoglContext for using vertex arrays
like GLES does
* clutter/cogl/gl/cogl-context.c:
Initializes texture_vertices + texture_vertices_size members
* clutter/cogl/gl/cogl-internal.h:
Adds COGL_ENABLE_COLOR_ARRAY
* clutter/cogl/gl/cogl.c:
Add COGL_ENABLE_COLOR_ARRAY support to cogl_enable
* clutter/cogl/gles/cogl-context.h:
Change the CoglTextureGLVertex to use GLfloat for the position
and texture coord attributes and GLubyte for the color.
* clutter/cogl/gles/cogl-texture-private.h:
Adds a wrap_mode member like GL has.
* clutter/cogl/gl/cogl-texture.c
* clutter/cogl/gles/cogl-texture.c:
Improves the comparability of the files, such that the remaining
differences, better reflect the fundamental differences needed
between GL and GLES. Notably GL no longer uses glBegin/glEnd for
submitting vertices, it uses vertex arrays like GLES and this gives
a small but measurable fps improvement for test-text.
* clutter/cogl/cogl-shader.h: Add a function for setting an
integer uniform, similar to cogl_program_uniform_1f().
* clutter/cogl/gl/cogl-program.c: Implement the GL version
of cogl_program_uniform_1i().
* clutter/cogl/gles/cogl-program.c: Implement the GLES version
of cogl_program_uniform_1i().
Bug 1049 - Clutter doesn't support most GLSL uniforms (patch
by Chris Lord and Neil Roberts)
* README: Update release notes.
* clutter/Makefile.am:
* clutter/clutter-shader-types.[ch]: Add GValue types for
shader values.
* clutter/clutter-actor.[ch]: Update the shader API to use
the newly added GValue support for GLSL shader uniform
setters.
* clutter/clutter-shader.[ch]: Add float and integer convenience
API for single value GLSL uniform setters.
* clutter/cogl/cogl-shader.h: Add new uniform setters.
* clutter/cogl/gl/cogl-context.c:
* clutter/cogl/gl/cogl-context.h:
* clutter/cogl/gl/cogl-defines.h.in:
* clutter/cogl/gl/cogl-program.c:
* clutter/cogl/gl/cogl.c: Update the GL implementation of COGL
to handle the GLSL uniform setters.
* clutter/cogl/gles/cogl-gles2-wrapper.c:
* clutter/cogl/gles/cogl-gles2-wrapper.h:
* clutter/cogl/gles/cogl-internal.h:
* clutter/cogl/gles/cogl-program.c: Update the GLES 2.0 implementation
of COGL to handle the GLSL uniform setters.
* doc/reference/clutter/clutter-sections.txt:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-fbo.c:
* tests/interactive/test-shader.c: Update the shader tests.
* clutter/clutter-alpha.h:
* clutter/clutter-alpha.c:
(clutter_alpha_set_mode): Use a lookup table to find the alpha
function given the animation mode.
(clutter_exp_in_func),
(clutter_exp_out_func),
(clutter_exp_in_out_func): Add new exponential functions.
* clutter/clutter-script.c: Update the lookup table with the
new animation modes; match "linear" to the ramp-inc alpha
function.
* clutter/clutter-types.h: Add new AnimationMode values.
* tests/interactive/test-easing.c: Update the easing functions
test.
Bug 1014 - Clutter Animation API Improvements
* clutter/Makefile.am:
* clutter/clutter.h: Update the build
* clutter/clutter-types.h: Add AnimationMode, an enumeration
for easing functions.
* clutter/clutter-alpha.[ch]: Add the :mode property to
control the function bound to an Alpha instance using an
enumeration value. Also add six new alpha functions:
- ease-in, ease-out, ease-in-out
- sine-in, sine-out, sine-in-out
* clutter/clutter-deprecated.h: Deprecate the #defines for
the alpha functions. They will be replaced by entries in the
ClutterAnimationMode.
* clutter/clutter-interval.[ch]: Add ClutterInterval, an
object for defining, validating and computing an interval
between two values.
* clutter/clutter-animation.[ch]: Add ClutterAnimation, an
object responsible for animation the properties of a single
actor along an interval of values. ClutterAnimation memory
management is automatic. A simple wrapper method for
ClutterActor is provided:
clutter_actor_animate()
which will create, or update, an animation for the passed
actor.
* clutter/clutter-debug.h:
* clutter/clutter-main.c: Add a new 'animation' debug note.
* clutter/clutter-script.c: Clean up the alpha functions
whitelist, and add the new functions.
* doc/reference/clutter/Makefile.am:
* doc/reference/clutter/clutter-sections.txt: Update the
API reference.
* doc/reference/clutter/clutter-animation.xml: Renamed to
doc/reference/clutter/clutter-animation-tutorial.xml to
avoid clashes with the ClutterAnimation section.
* doc/reference/clutter/clutter-docs.sgml: Renamed to
doc/reference/clutter/clutter-docs.xml, as it was an XML
file and not a SGML file.
* tests/Makefile.am:
* tests/interactive/Makefile.am:
* tests/interactive/test-animation.c:
* tests/interactive/test-easing.c: Add two tests for the
new simple animation API and the easing functions.
* tests/interactive/test-actors.c:
* tests/interactive/test-behave.c:
* tests/interactive/test-depth.c:
* tests/interactive/test-effects.c:
* tests/interactive/test-layout.c:
* tests/interactive/test-multistage.c:
* tests/interactive/test-paint-wrapper.c:
* tests/interactive/test-rotate.c:
* tests/interactive/test-scale.c:
* tests/interactive/test-texture-quality.c:
* tests/interactive/test-threads.c:
* tests/interactive/test-viewport.c: Update interactive tests
to the deprecations and new alpha API.
* clutter/clutter-entry.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-script.c:
* clutter/clutter-stage.c: Use the ParamSpecColor and GValue
API for ClutterColor-based properties.
Bug 1265 - ClutterScore doesn't emit 'started' signal (Bastian
Winkler)
* clutter/clutter-score.c: Emit the ::started signal.
* tests/interactive/test-score.c: Check the emission of the
Score signals.
* clutter/cogl/gles/cogl-gles2-wrapper.c:
Initialise the 'tex' sampler uniform to 0. The GLSL spec
specifically says that you must initialize sampler uniforms. This
fixes texturing for GLES 2 when using the PowerVR simulator via
software Mesa.
* clutter/cogl/common/cogl-mesh.c:
Make sure we use the appropriate cogl_wrap_gl* funcs as appropriate
* clutter/cogl/gles/cogl-gles2-wrapper.c
* clutter/cogl/gles/cogl-gles2-wrapper.h:
In our glColorPointer wrapper we needed to mark our color attribute
as normalized.
* tests/conform/Makefile.am:
When creating unit test symlinks we use the -l gtester option to
list tests, but when using the PVR SDK the test binary also spews
out some extra info that caused lots of random symlinks to be
created. We now grep for lines starting with a '/'
* tests/conform/test-mesh-contiguous.c
* tests/conform/test-mesh-mutability.c:
Use cogl_set_source_color instead of directly calling glColor4ub
* clutter/clutter-behaviour-ellipse.c:
(clutter_behaviour_ellipse_applied): Do not reset the depth
of the actors to which the Ellipse behaviour has been applied
to, unless the behaviour is going to update it because it has
a tilt on the X or Y axis.
(clutter_actor_get_paint_visibility): Be sure to return exactly
TRUE or FALSE instead of zero or some non-zero value in these
functions that return a gboolean. Thanks to Kai Wei for spotting.
* clutter/cogl/cogl-color.h:
* clutter/cogl/cogl-path.h:
* clutter/cogl/cogl-types.h:
* clutter/cogl/common/cogl-color.c: Deprecated cogl_color()
in favour of cogl_set_source_color() and friends; store the
CoglColor components as unsigned bytes instead of fixed point
normalized values; add functions for allocating, copying and
freeing CoglColor, for use of language bindings.
* clutter/cogl/cogl.h.in:
* clutter/cogl/cogl-deprecated.h: Added cogl-deprecated.h,
an header file containing the deprecation symbols similar
to clutter-deprecated.h.
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl-texture.c:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Update the GL and GLES implementations
of COGL after the CoglColor changes.
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-entry.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-texture.c: Do not use CoglColor whenever it
is possible, and use cogl_set_source_color4ub() instead.
* clutter/pango/cogl-pango-render.c: Ditto as above.
* doc/reference/clutter/subclassing-ClutterActor.xml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-cogl-offscreen.c:
* tests/interactive/test-cogl-primitives.c:
* tests/interactive/test-cogl-tex-convert.c:
* tests/interactive/test-cogl-tex-foreign.c:
* tests/interactive/test-cogl-tex-getset.c:
* tests/interactive/test-cogl-tex-polygon.c:
* tests/interactive/test-cogl-tex-tile.c:
* tests/interactive/test-paint-wrapper.c: Drop the usage of
CoglColor whenever it is possible.
coordinates
* clutter/cogl/gl/cogl-texture.c: Instead of sorting the vertex
and texture coordinates passed to cogl_texture_rectangle, just
swap both sets whenever the texture coordinates are backward.
* clutter/cogl/gl/Makefile.am (libclutterinclude_HEADERS):
* clutter/cogl/common/Makefile.am
(libclutter_cogl_common_la_SOURCES): Move cogl-mesh.h into the
headers for libclutter so that it will get installed.
* tests/conform/test-mesh-mutability.c (on_paint):
* tests/conform/test-mesh-interleved.c (on_paint):
* tests/conform/test-mesh-contiguous.c (on_paint): Use g_usleep
instead of sleep
* tests/conform/test-mesh-mutability.c (queue_redraw):
* tests/conform/test-mesh-interleved.c (queue_redraw):
* tests/conform/test-mesh-contiguous.c (queue_redraw): Added
missing return statement
* clutter/cogl/cogl-mesh.h: Add a declaration for
cogl_mesh_submit
* clutter/cogl/common/cogl-mesh.c (cogl_mesh_submit): Move the
documentation to cogl-mesh.h to match the rest of the functions
* clutter/cogl/cogl-mesh.h
* clutter/cogl/cogl-types.h
* clutter/cogl/cogl.h.in
* clutter/cogl/common/Makefile.am
* clutter/cogl/common/cogl-mesh-private.h
* clutter/cogl/common/cogl-mesh.c
* clutter/cogl/gl/cogl-context.c
* clutter/cogl/gl/cogl-context.h
* clutter/cogl/gl/cogl-defines.h.in
* clutter/cogl/gl/cogl.c
* clutter/cogl/gles/cogl-context.c
* clutter/cogl/gles/cogl-context.h
* doc/reference/cogl/cogl-docs.sgml
* doc/reference/cogl/cogl-sections.txt:
The Mesh API provides a means for submitting an extensible number of
per vertex attributes to OpenGL in a way that doesn't require format
conversions and so that the data can be mapped into the GPU (in vertex
buffer objects) for - hopefully - fast re-use.
There are a number of things we can potentially use this API for, but
right now this just provides a foundation to build on. Please read
the extensive list of TODO items in cogl-mesh.c for examples.
Please refer to the cogl-mesh section in the reference manual for
documentation of the API.
* tests/conform/Makefile.am
* tests/conform/test-conform-main.c
* tests/conform/test-mesh-contiguous.c
* tests/conform/test-mesh-interleved.c
* tests/conform/test-mesh-mutability.c:
Privides basic coverage testing for the mesh API.
Bug 1238 - [PATCH] Pack bitfields in ClutterTexturePrivate
* clutter/clutter-texture.c:
Using 'guint my_field : 1' for booleans to save space only
makes sense if you group all such fields together. Fix
grouping for ClutterTexturePrivate. Thanks to Owen Taylor for
patch.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-clone-texture.c:
* clutter/clutter-private.h:
* clutter/clutter-texture.c:
* clutter/x11/clutter-x11-texture-pixmap.c:
Attempt to lower overhead of updating TFP's (particularly mipmaped).
Compresses mipmap updates only for visible TFPs.
Avoiding updates for non visible TFP's whilst keeping visible
clones working ok.
* clutter/clutter-main.c (_clutter_id_to_color): When using fuzzy
picking to pick a color for an actor, it would previously set the
fuzzy bit and then all but the most significant of the remaining
unused bits. This meant that for 16-bit displays it would end up
with a strange pattern for the unused bits like 1011 which could
cause it to round up. Now it just sets all but the most
significant of all of the unused bits giving a pattern like
0111. Thanks to Guy Zadickario for the patch.
* clutter/cogl/common/cogl-fixed.c (cogl_fixed_sin)
(cogl_angle_sin, cogl_angle_tan, cogl_fixed_sqrt): Replaced uses
of 1 + ~x with just -x which is equivalent and easier to
understand.
64-bit multiplication macro instead of COGL_FIXED_FAST_DIV for
calculating xmax as was done previously. This fixes
test-perspective and other tests that had a gone a bit skewiff.
called on complete
* clutter/clutter-score.c (start_children_entries): Use the name
of the marker to start as the data parameter and only start child
timelines that have the same marker name. Previously the
ClutterScore would just start all child entries when a marker was
reached or the timeline completed regardless of whether they were
added with a marker or not. Thanks to Mihail Naydenov for
reporting the bug.
Bug 1231 - Build fails in gles flavour in revision 3442
* clutter/cogl/gles/cogl-context.h: Fix remaining use of
ClutterFixed over CoglFixed. (Michael Boccara)
* clutter/clutter-timeline.c (timeline_timeout_func): Move the
code for firing the new-frame and marker-reached signals into a
separate static function so that it can also be called when the
last frame is reached. Also fix an issue where the frame numbers
were changed in the wrong direction when detecting missed markers
in a reversed timeline. Based on a patch by Michael Boccara.
* tests/test-timeline.c: Now tries to automatically verify whether
the test worked by keeping track of all the signal emissions. The
timelines are run a second time with an extra timeout that causes
delays to simulate skipped frames.
* clutter/clutter-texture.c: (clutter_texture_set_filter_quality),
(clutter_texture_get_filter_quality):
Fix up some logic, typos.
* clutter/glx/clutter-glx-texture-pixmap.c:
Improve support for mipmaped TFP textures.
Bug 1200 - Crash with invalid DISPLAY
* clutter/clutter-main.c: Use the ClutterBackend wrapper API
instead of directly checking the class structure.
* clutter/glx/clutter-backend-glx.c: Return the correct value
in case of failure.
* clutter/x11/clutter-backend-x11.c: Bail out if XOpenDisplay()
failed.
Bug 1219 - Clean up cogl.h
* clutter/cogl/cogl.h.in:
* clutter/cogl/cogl-offscreen.h:
* clutter/cogl/cogl-path.h:
* clutter/cogl/cogl-shader.h:
* clutter/cogl/cogl-texture.h:
* clutter/cogl/cogl-types.h: Split up the massive cogl.h file
into sub-header for each section of the API.
* clutter/cogl/gl/*:
* clutter/cogl/gles/*: Update the GL and GLES implementations
of COGL to cope with the new header structure.
* doc/reference/cogl/Makefile.am: Fix symbol retrieval.
Bug 1211 - Drop ClutterFeatureFlags usage from COGL
* clutter/cogl/cogl.h.in:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/cogl.c: Do not use ClutterFeatureFlags
when CoglFeatureFlags will do. This removes the last usage
of Clutter API inside COGL.
Bug 1210 - Add CoglColor API
* clutter/cogl/cogl-color.h:
* clutter/cogl/cogl.h.in:
* clutter/cogl/common/Makefile.am:
* clutter/cogl/common/cogl-color.c:
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Add a new color-type, to be used by
COGL. CoglColor is optimized to allow the minimum amount of
conversions possible for both GL and GLES implementations.
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-entry.c:
* clutter/clutter-main.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c: Use CoglColor when needed.
* clutter/pango/pangoclutter-render.c: Use CoglColor when needed.
* doc/reference/cogl/cogl-docs.sgml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/test-cogl-offscreen.c:
* tests/test-cogl-primitives.c:
* tests/test-cogl-tex-convert.c:
* tests/test-cogl-tex-foreign.c:
* tests/test-cogl-tex-getset.c:
* tests/test-cogl-tex-polygon.c:
* tests/test-cogl-tex-tile.c:
* tests/test-paint-wrapper.c: Update the tests.
* README: Update release notes.
Bug 1209 - Move fixed point API in COGL
* clutter/cogl/cogl-fixed.h:
* clutter/cogl/cogl.h.in:
* clutter/cogl/common/Makefile.am:
* clutter/cogl/common/cogl-fixed.c: Add fixed point API, modelled
after the ClutterFixed. The CoglFixed API supercedes the ClutterFixed
one and avoids the dependency of COGL on Clutter's own API.
* clutter/cogl/common/cogl-clip-stack.c:
* clutter/cogl/common/cogl-primitives.c:
* clutter/cogl/common/cogl-primitives.h: Update internal usage of
ClutterFixed to CoglFixed.
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl-primitives.c:
* clutter/cogl/gl/cogl-texture.c:
* clutter/cogl/gl/cogl.c: Ditto, in the GL implementation of the
COGL API.
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-fbo.c:
* clutter/cogl/gles/cogl-gles2-wrapper.c:
* clutter/cogl/gles/cogl-primitives.c:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Ditto, in the GLES implementation of
the COGL API.
* clutter/pango/pangoclutter-glyph-cache.c:
* clutter/pango/pangoclutter-glyph-cache.h: Ditto, in the Pango
renderer glyphs cache.
* clutter/clutter-fixed.c:
* clutter/clutter-fixed.h: ClutterFixed and related API becomes
a simple transition API for bindings and public Clutter API.
* clutter/clutter-actor.c:
* clutter/clutter-alpha.c:
* clutter/clutter-backend.c:
* clutter/clutter-behaviour-depth.c:
* clutter/clutter-behaviour-ellipse.c:
* clutter/clutter-behaviour-path.c:
* clutter/clutter-behaviour-rotate.c:
* clutter/clutter-behaviour-scale.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-color.c:
* clutter/clutter-entry.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c:
* clutter/clutter-timeline.c:
* clutter/clutter-units.h: Move from the internal usage of
ClutterFixed to CoglFixed.
* doc/reference/clutter/clutter-sections.txt:
* doc/reference/cogl/cogl-docs.sgml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/test-cogl-tex-tile.c:
* tests/test-project.c: Fix tests after the API change
* README: Add release notes.
* clutter/cogl/gles/cogl-fbo.c: Copy the code from gl/cogl-fbo but
use the API calls directly instead of loading an extension because
it is part of the core in GLES 2.
* clutter/cogl/gles/cogl.c (_cogl_features_init): Report
COGL_FEATURE_OFFSCREEN.
* clutter/cogl/gles/cogl-fbo.h (CoglFbo): Add gl_stencil_handle.
* clutter/cogl/gles/cogl-context.h (CoglContext): Add
viewport_store
* tests/test-fbo.c (make_shader): Conditionally use the GLES 2
names of the shader variables
* clutter/clutter-main.c (_clutter_do_pick): After picking is
finished, restore the state of glEnable (GL_DITHER). Otherwise it
will cause the scene to look different after the first pick on low
depth displays. (Thanks to Michael Boccara for the patch)
* clutter/cogl/gl/cogl-texture.c (cogl_texture_polygon)
(_cogl_texture_quad_sw, _cogl_texture_quad_hw):
* clutter/cogl/gles/cogl-texture.c (cogl_texture_polygon)
(_cogl_texture_quad_sw, _cogl_texture_quad_hw): Enable backface
culling in GL if it is requested.
* clutter/cogl/gles/cogl-texture.c (_cogl_texture_quad_sw)
(_cogl_texture_quad_hw):
* clutter/cogl/gl/cogl-texture.c (_cogl_texture_quad_sw)
(_cogl_texture_quad_hw): Reorder the
vertices so that they are counter-clockwise.
* clutter/cogl/gles/cogl-context.h (CoglContext):
* clutter/cogl/gl/cogl-context.h (CoglContext): Added a flag to
store whether backface culling is currently enabled.
* clutter/cogl/gles/cogl.c (cogl_enable_backface_culling):
* clutter/cogl/gl/cogl.c (cogl_enable_backface_culling): New
function
* doc/reference/cogl/cogl-sections.txt: Add
cogl_enable_backface_culling
* clutter/cogl/gl/cogl-texture.c (_cogl_texture_upload_subregion_to_gl)
(_cogl_texture_upload_to_gl):
* clutter/cogl/gles/cogl-texture.c (_cogl_texture_upload_to_gl)
(_cogl_texture_upload_subregion_to_gl):
When uploading data to a sliced texture, fill the waste pixels
with copies of the edge of the real texture data. Otherwise the
value of the waste pixels are undefined so it will show artifacts
when the texture is scaled with GL_LINEAR and the pixels are
blended in.
values (SIGSEGV)
* clutter/cogl/gl/cogl-texture.c
(_cogl_texture_upload_subregion_to_gl): When iterating over the
slices, discard ones that don't intersect immediatly otherwise it
will call glTexSubImage2D with a negative width/height and then
move the source position incorrectly. Thanks to Gwenole
Beauchesne.
* clutter/clutter-behaviour-bspline.c: Changed the CBZ_T_POW3 and
CBZ_T_MUL functions so that they preserve more of the least
significant bits. This fixes some of the jaggy behaviour with
longer paths.
reviewed by: Emmanuele Bassi <ebassi@linux.intel.com>
* clutter/clutter-color.[ch]: Add GParamSpec and GValue integration
for ClutterColor. With ClutterParamSpecColor it is possible to define
color properties; with the GValue integration it's possible to
automatically transform strings into colors and vice versa.
(clutter_color_free): Allow NULL parameter to match other boxed
types destructors.
(clutter_color_new): Add a constructor for the ClutterColor boxed
type, mostly for bindings.
* clutter/clutter-container.[ch]: Add checks to the Container
interface invocation methods, to avoid crashing or corrupting
the stack when an actor does not implement every virtual
function of the Container interface vtable. GObject allows this
to happen so we must handle the case gracefully. This also means
that we can classify some virtual function as mandatory (as is
the case for ::add, ::remove and ::foreach) and some other
optional.
Handle dropped motion events when computing crossing events,
based on a patch from Gwenole Beauchesne.
* clutter/clutter-main.c: (clutter_event_get_device): internal static
utility function.
(clutter_do_event): generate enter/leave events for all pointer
events.
(generate_enter_leave_events): modified enter/leave events generator
to work for all pointer event types. Enter/leave events are now
delivered before the motion/button event that caused the crossing to
happen.
* clutter/clutter-event.c: (clutter_event_copy), (clutter_event_free):
removed reference counting logic that is not needed when the crossing
events are directly delivered.
Bug 1130 - CLUTTER_MOTION is not emitted when time goes backwards.
* clutter/clutter-main.c (clutter_do_event): Check for time
rollbacks inside the motion event throttling. (Pierce Liu)
Bug 1154 - clutter_timeout_pool_new() documentation doesn't say
how to free
* clutter/clutter-timeout-pool.c: Update the documentation to
note that you must use g_source_unref() to free the timeout
pool. (Murray Cumming)
Bug 1124 - Clutter causes an additional size request in each
allocation
* clutter/clutter-actor.c:
(clutter_actor_store_old_geometry): Store the allocation instead
of causing a new size-request cycle. (Johan Bilien)
Bug 1125 - Save an extra pango_layout_get_size in many cases
* clutter/clutter-label.c:
(clutter_label_create_layout_no_cache): Add a simple check
before calling pango_layout_get_size(). (Johan Bilien)
* clutter/clutter-alpha.c:
(clutter_alpha_get_alpha): Do not return the cached value but
just compute the current alpha value. The use case is pretty
much straightforward: stop a timeline, advance it, and retrieve
the alpha value before starting the timeline to adjust an
animation dependent on the alpha. Caching the alpha value is
not needed because the behaviours will always pass the alpha
value inside the ::alpha-notify virtual function anyway, so
there is no need for them to call clutter_alpha_get_alpha().
This change makes it also possible to reliably unit-test
ClutterAlpha.
(timeline_new_frame_cb): Call clutter_alpha_get_alpha().
* clutter/clutter-main.c:
* clutter/clutter-main.h:
* clutter/clutter-private.h:
* clutter/x11/clutter-backend-x11.c:
(clutter_get_option_group_without_init):
Function to obtain clutter option group without opening display
(for use with foreign display and gtk_clutter_init). Bug 1033.
Stripped trailing whitespace.
* clutter/clutter-main.c: Don't free the ClutterMainContext so
that the main loop can be restarted.
* clutter/eglx/clutter-backend-egl.c:
* clutter/eglnative/clutter-backend-egl.c: Register an atexit
handler which disposes the backend object so that we are still
guaranteed to call eglTerminate on GLES.
Bug 1033 - Manually parsing command line options prevents
initializing clutter
* clutter/clutter-main.c:
(post_parse_hook), (clutter_init_with_args),
(clutter_parse_args), (clutter_init): Move the initialization
of Clutter at the end of the post-parse hook of Clutter's
GOptionGroup. Clutter must be initialized at the end of the
argument parsing.
* clutter/clutter-main.c: Properly document the
clutter_get_option_group() function and the invariant that
after parsing Clutter's option group the library will be
initialized. (Thanks to Tomas Frydrych for pointing this
out)
* clutter/x11/clutter-backend-x11.c: Properly document the
usage of clutter_x11_set_display().
* clutter/x11/clutter-x11.h: clutter_x11_set_display() is
public API and should be declared in the header we install.
* clutter/cogl/gl/cogl-texture.c (cogl_texture_set_region):
* clutter/cogl/gles/cogl-texture.c (cogl_texture_set_region):
Don't attempt to upload any data if the width or height of the
subregion is zero. Thanks to Gwenole Beauchesne.
* clutter/cogl/gles/cogl.c (cogl_get_viewport): Use glGetIntegerv
instead of glGetFixedv to read the viewport because the latter
converts incorrectly on some hardware.
* clutter/clutter-stage.c (clutter_stage_read_pixels): Use
OpenGL's coordinate system for the arguments to glReadPixels (so
that y zero is the bottom of the window). Use clutter_redraw
instead of clutter_stage_paint to ensure the right GL context is
selected. Set some of the glPixelStore parameters that might have
been changed by Cogl.
* tests/test-stage-read-pixels.c: Replace with a different test
that gets a sub-region of the stage around the cursor.
* clutter/glx/clutter-stage-glx.c (clutter_stage_glx_realize):
Don't set a backing pixel on the X window. Otherwise when the
window resizes it will flicker when X paints the background
immediatly before Clutter repaints the whole stage.
* clutter/clutter-actor.c
(clutter_actor_set_anchor_point_from_gravity)
(clutter_actor_move_anchor_point_from_gravity): Add documentation
to make it clear that the anchor point won't move when the actor
is resized.
window_style correction.
* clutter/win32/clutter-stage-win32.c (get_window_style): Remove
the WS_MAXIMIZEBOX style if the stage isn't resizable.
(clutter_stage_win32_set_user_resize): Queue a redraw of the
window frame when the user_resize property is changed.
* clutter/win32/clutter-event-win32.c (message_translate): Don't
update the size of the stage when handling WM_SIZE messages that
result from the stage being minimized. Thanks to Roman Yazmin.
* clutter/glx/clutter-glx-texture-pixmap.c:
* clutter/x11/clutter-x11-texture-pixmap.c:
TFP resyncing on MapNotify/ConfigureNotify (bug 1020; patch by
Andy Wingo <wingo@pobox.com>).
* clutter/clutter-main.c (_clutter_id_to_color): When choosing a
pick color, set all but the most significant of the unused
bits. This should make make it more likely that the GL
implementation will round down to the right value.
* tests/test-pick.c: Test case for picking. It creates 192 actors
at known positions and stores their gids. It then calls
clutter_stage_get_actor_at_pos with each position to check that
the right gid is returned.
* tests/Makefile.am (noinst_PROGRAMS): Add test-pick
* clutter/clutter-label.c: Bring back layout caching. This time it
will cache up to three different layouts. The width for which each
layout was generated is stored so that if the same width is
requested again it can use the cached version. If no cached
version is available it will try to replace the oldest
layout. 'Age' is determined by a counter which is incremented
every time a layout is created. The cache is cleared after any
property changes that might affect the layout.
(struct _ClutterLabelPrivate): Removed extents_width,
extents_height and context because they weren't used anywhere.
* tests/test-label-cache.c: Add a test which checks whether the
label is using a different layout when properties are
changed. Also compares the extents of the label's layout with an
independent layout and fails if they aren't the same.
* tests/Makefile.am (noinst_PROGRAMS): Add test-label-cache
* clutter/clutter-actor.c (clutter_actor_set_property): When
changing the anchor point properties, use set_anchor_pointu
instead of changing the value directly so that a redraw will be
queued.
(clutter_actor_set_anchor_pointu): Queue a redraw when the anchor
point is changed. Thanks to Johan Bilien.
Bug 1082 - Texture bitmap is destroyed in wrong way
* clutter/cogl/common/cogl-bitmap-pixbuf.c:
(_cogl_bitmap_from_file): Make a copy of the pixbuf data in
the internal image loader so that we can keep working under
the assumption that we are using the GLib memory allocation
and deallocation functions.
Bug 1099 - No ClutterScript API to get a list of IDs in a given file
* clutter/clutter-script.[ch]: Add clutter_script_list_objects(),
a function for retrieving all the objects built by a ClutterScript
instance. (Based on a patch by Noah Gibbs)
Bug 1090 - Label somtimes returns natural_width < min_width
* clutter/clutter-label.c:
(clutter_label_get_preferred_width): Check that the width of the
layout is always greater than 0. (Johan Bilien)
* doc/reference/clutter/subclassing-ClutterActor.xml: Update the
custom actor example since the Cogl API was changed to namespace
all of the path related functions in cogl_path_*. Thanks to Nati
Berkover.
* clutter/clutter-score.c: Add missing parameter in example of
calling clutter_score_start().
x-align property
* clutter/clutter-entry.c (clutter_entry_paint): When calculating
the position to draw the cursor at, take into account the
alignment of the text. Queue a redraw when the x-align property is
changed.
* clutter/win32/clutter-event-win32.c (message_translate): The
coordinates in a WM_MOUSEWEEL message are given relative to the
screen so they need to be converted to client coordinates before
use. Thanks to Roman Yazmin.
* clutter/clutter-child-meta.c:
(clutter_child_meta_set_property),
(clutter_child_meta_class_init): Make the :container and
:actor properties of ChildMeta construct-only, to allow
bindings to actually use ChildMeta without abusing the API.
* clutter/clutter-container.c (create_child_meta): Instead of
setting the members of the ChildMeta structure, use the
constructor properties.
* clutter/clutter-script-parser.c:
* clutter/clutter-script-private.h: Clean up the code; add a
conversion function for reading a ClutterColor out of a
JSON object or array definition.
* clutter/clutter-script.c: Clean up the code; document properly
how we translate from type name to type function.
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/cogl.c:
* clutter/cogl/cogl.h.in: Add cogl_clip_stack_save,
cogl_clip_stack_restore, cogl_viewport and cogl_frustum.
* clutter/cogl/gl/cogl-fbo.h:
* clutter/cogl/gl/cogl-fbo.c: Try to attach a stencil buffer when
creating an FBO.
* clutter/cogl/common/cogl-clip-stack.c: Add functions to save and
restore the whole state of the stack.
* clutter/clutter-texture.c (clutter_texture_paint): When
rendering the FBO source, setup a temporary asymmetric perspective
projection matrix to render it as it would appear on screen.
* clutter/clutter-private.h:
* clutter/clutter-actor.c
(_clutter_actor_apply_modelview_transform_recursive): No longer
static and exported in clutter-private.h
* clutter/clutter-timeline.c: Calculate the 'duration' property
on-demand instead of storing it as a member variable. Notify
duration property changes whenever the fps or num_frames changes.
* clutter/clutter-score.c (clutter_score_is_playing): Check
whether priv->running_timelines is NULL before checking its
length.
(foreach_running_timeline): Remove the completed signal handler
when stopping the score. Otherwise the completed callback will get
called multiple times if the timeline is started later.
* clutter/clutter-stage.c (clutter_stage_dispose): Unrealize the
stage before removing the update idle handler. Otherwise
unrealizing causes another redraw to be queued and if the stage
object remains alive it will cause an assert and abort.
* clutter/clutter-fixed.h:
* clutter/clutter-units.h: Fix the upper and lower boundaries of
ClutterFixed and ClutterUnit types; G_MAXINT16 and G_MININT16
were not enough to describe those values.
* clutter/clutter-main.c:
Destroy the debugging timer when the context is freed.
* clutter/clutter-stage.c:
Free the stage title when the stage is finalized.
function is supposed to accept -1 to disable sorting. However it
checks for whether the column is >= the number of columns, but
clutter_model_get_n_columns() returns an unsigned int so the
column number also gets promoted to unsigned for the
comparison. Therefore -1 is always greater than the number of
columns so it wouldn't let you set it.
* clutter/clutter-rectangle.c:
* clutter/clutter-group.c:
* clutter/clutter-entry.c:
* clutter/clutter-clone-texture.c: Remove unnecessary calls to
cogl_{push,pop}_matrix. The matrix is preserved in
clutter_actor_paint whenever the actor's transformation is applied
so there should be no need to push the matrix in actor paint
implementations unless it does some additional transformations
itself.
* clutter/clutter-stage.c:
(clutter_stage_hide_cursor):
Fixed C&P bug that made it impossible to show cursor once hidden.
Stripped trailing whitespace.
Bug 1011 - Fix TFP fallback mechanism (take 2)
* clutter/glx/clutter-glx-texture-pixmap.c:
* tests/test-pixmap.c:
Slightly modified patch from Gwenole Beauchesne applied
to better handle both falling back to non accelerated tfp
and improvements to the test case.
Bug 1033 - Manually parsing command line options prevents
initializing clutter (Armin Burgmeier)
* clutter/clutter-main.c:
(post_parse_hook), (clutter_init_real): Set the is_initialized
flag inside the real initialization function.
new layout code
* clutter/clutter-texture.c (clutter_texture_new_from_actor): Now
parents the source actor if it doesn't already have a parent so
that it will get an allocation during layout.
* tests/test-fbo.c: One of the tests tries to ensure that the
ClutterTexture clone keeps the source actor alive by derefing
it. However as actors have a floating reference then test-fbo
doesn't have its own reference once the source is parented so
unrefing just steals the parent's reference and causes
badness. The test now claims the floating reference before cloning
the source so that it can safely be unref'd later.
(clutter_actor_get_abs_allocation_vertices): The initialization of
the local stage pointer got moved away in revision 3081 so it was
crashing if the function is called before the layout is run.
* clutter/clutter-label.c:
(clutter_label_create_layout_no_cache),
(clutter_label_create_layout): Split the layout creation in two
functions: one creating the layout, the other creating the layout
and hitting the glyphs cache. The first one is for the offscren
operations - like requesting the preferred size; the second one
is for paint and allocation.
(clutter_label_allocate): Try to aggressively cache the PangoLayout
between allocations - to avoid recreating it even when the label
just moved because of an animation. See bug #1010.
robust. There are situations though where the device seems to stop
generating any touch events until all fingers have been lifted and
a new interaction session is started.
Bug 1010 - ClutterLabel does not update the layout (Lee Jusung)
* clutter/clutter-actor.c:
(clutter_actor_queue_relayout): Remove some pointer dereferencing.
* clutter/clutter-label.c:
(clutter_label_allocate): Revert the change of r2883 and remove the
layout width cache and force a recreation of the layout every time
we receive an allocation.
This is now do-what-I-mean like clutter_actor_get_size so that if
the allocation box is available it will use that, otherwise it
will use the preferred size. clutter_actor_transform_vertices has
been converted to clutter_actor_transform_and_project_box so that
it can be used by both functions. Based on a patch by Emmanuele
Bassi.
(clutter_actor_get_abs_allocation_vertices)
(clutter_actor_get_allocation_vertices): These two functions now
force a relayout if the allocation box is not available.
* tests/test-fbo.c: Fixed the shader to use texture2D instead of
texture2DRect now that GL_EXT_texture_rectangle is no longer used.
Add a note to the clutter_stage_read_pixels doc that the alpha channel
isn't guaranteed to contain sensible data
* tests/test-stage-read-pixels.c: (update_snapshot):
Overwrite the alpha data when using clutter_stage_read_pixels; fixes
this test on non-nvidia drivers
* clutter/glx/clutter-stage-glx.c:
* clutter/x11/clutter-backend-x11.c:
* clutter/x11/clutter-backend-x11.h:
* clutter/x11/clutter-event-x11.c:
* clutter/x11/clutter-x11.h:
* tests/test-devices.c:
Disable use of XInput and add an explicit clutter_x11_enable_xinput
to enable it.
Also fix up the x11 pre-init calls to not need g_type_init.
* clutter/clutter-event.c: (clutter_event_get_device_id): swap
arguments of g_return_val_if_fail around.
* clutter/clutter-event.h: added *device field to crossing events as
well.
* clutter/clutter-main.c: (emit_pointer_event): added a device
argument and check for per device grabs if this device is passed.
(clutter_do_event): pass the device if present for all pointer event
emissions.
(generate_enter_leave_events): copy the device from the motion events
when generating enter/leave events.
Correct documentation about accepted pixel formats
* tests/test-stage-read-pixels.c: (main):
Don't try to free a ClutterTexture after main, fixes segfault on quit
* clutter/clutter-behaviour-bspline.h:
* clutter/clutter-behaviour.h:
* clutter/clutter-event.h:
* clutter/clutter-texture.h: Add missing documentation and
change the copyright and licensing notice to use the FSF
website instead of its address. (#512)
* clutter/cogl/gl/cogl.c (set_clip_plane):
* clutter/clutter-alpha.c (sinc_func): Use G_PI instead of M_PI
because M_PI isn't defined in MSVC without a special
#define. Thanks to Haakon Sporsheim
Bug 1007 - Fix TFP fallback mechanism
* clutter/glx/clutter-glx-texture-pixmap.c:
* clutter/x11/clutter-x11-texture-pixmap.c:
Add some extra safety to glx pixmap creations and tidy up some notes.
Patch from Gwenole Beauchesne.
Bug 1000 - clutter-x11 should define gtypes for its enumerations
* clutter/x11/Makefile.am:
* clutter/x11/clutter-event-x11.c:
* clutter/x11/clutter-x11-enum-types.c.in:
* clutter/x11/clutter-x11-enum-types.h.in:
* clutter/x11/clutter-x11.h: Add the GTypes for the X11-specific
enumerations, so that they can be used by the bindings. (Andy
Wingo)
Bug 997 - automatic updates not working for named TFP pixmaps,
at least in x11
* clutter/glx/clutter-glx-texture-pixmap.c:
* clutter/glx/clutter-glx-texture-pixmap.h:
* clutter/x11/clutter-backend-x11.c:
* clutter/x11/clutter-x11-texture-pixmap.c:
* clutter/x11/clutter-x11-texture-pixmap.h:
* clutter/x11/clutter-x11.h:
* configure.ac:
* tests/test-pixmap.c:
Rework Andy Wingos patch a little adding more safety for now also
handling redirect Windows (as well as pixmaps)
Bug 980 - cogl-bitmap-fallback.c compiler error/warning due to
cast issue (Haakon Sporsheim)
* clutter/cogl/common/cogl-bitmap-fallback.c:
(_cogl_unpremult_alpha_last),
(_cogl_unpremult_alpha_first): Cast to avoid a compiler warning
with MSC.
release events when pointer is outside window as well as re-enabling
keyrepeat.
* clutter/glx/clutter-stage-glx.c: (clutter_stage_glx_realize): select
for KeyPressMask and KeyReleaseMask even with XInput enabled.
* clutter/x11/clutter-backend-x11.c: (_clutter_x11_register_xinput):
Disabled the XInput keyboard code paths (comments and #if 0's)
* clutter/x11/clutter-event-x11.c: (event_translate): always handle
keyboard events without regard to XInput.
* clutter/osx/clutter-osx.h (_clutter_event_osx_put)
* clutter/osx/clutter-event-osx.c (clutter_event_osx_translate,
NSEvent:clutterStage:)
* clutter/osx/clutter-stage-osx.c (EVENT_HANDLER): Since events are
delivered to ClutterGLView, pass the associated ClutterStage directly
to event translation. Avoids relying on being embedded in
ClutterGLWindow, which makes it easier to implement clutter-gtk.
* clutter/osx/clutter-event.osx.c (NSEvent:clutterKeyVal:): Add
comment, on OSX backend the Shift modifier is included in 'keyval'
making it identical to 'unicode_value' Instead of <Shift>a or
<Shift>3 you'd get <Shift>A and <Shift>#
* clutter/cogl/gl/cogl.c:
Temp workaround for 10.4 ATI card OSX folks, see #929
(Tommi Komulainen)
Bug 998 - clutter always captures X input events
* clutter/eglx/clutter-stage-egl.c:
* clutter/glx/clutter-stage-glx.c:
When we disable X event retrival, dont still select for window
events.
* clutter/pango/pangoclutter-render.c: Fixed so that instead
of trying to set the color in prepare_run it uses draw_glyphs
to draw groups of glyphs and requests the color for each part
from Pango.
* clutter/clutter-actor.c:
(clutter_actor_set_min_width),
(clutter_actor_set_min_height),
(clutter_actor_set_natural_width),
(clutter_actor_set_natural_height): Ignore any override of the
minimum and natural size of the stage on backends that only
support static stages.
* clutter/clutter-stage.c (clutter_stage_allocate): Use the
preferred size of the ClutterStage implementation instead of
the display size.
* clutter/clutter-backend.[ch]: Remove get_display_size() and
clutter_backend_get_display_size().
* clutter/eglnative/clutter-backend-egl.c:
* clutter/fruity/clutter-backend-fruity.c:
* clutter/osx/clutter-backend-osx.c:
* clutter/sdl/clutter-backend-sdl.c:
* clutter/win32/clutter-backend-win32.c:
* clutter/x11/clutter-backend-x11.c: Remove get_display_size()
implementations.
* clutter/glx/clutter-glx-texture-pixmap.c:
Move the gl extension probe into the regular object init() rather than
class_init. Should be a little safer.
* clutter/clutter-main.h: Make the priority constants public.
* clutter/clutter-stage.c: Use CLUTTER_PRIORITY_REDRAW.
* clutter/clutter-timeline.c: Use CLUTTER_PRIORITY_TIMELINE.
* clutter/clutter-actor.c:
(clutter_actor_set_min_width),
(clutter_actor_set_min_height),
(clutter_actor_set_natural_width),
(clutter_actor_set_natural_height): Add a comment explaining
the override in place for backends providing a fixed size
on a stage.
* clutter/clutter-actor.c:
(clutter_actor_set_min_width),
(clutter_actor_set_min_height),
(clutter_actor_set_natural_width),
(clutter_actor_set_natural_height): If setting the minimum
and natural width and height on a top-level actor, and on
a backend that provides only static stages, then override
the value and use the size of the display as returned by
the backend.
* clutter/eglnative/clutter-stage-egl.c:
(clutter_stage_egl_realize): Remove the setting of the
minimum and natural width and height.
* clutter/clutter-stage.c:
(clutter_stage_allocate): Minor optimization.
(clutter_stage_init): Do not set the minimum size of the
stage wrapper, and require that the backends set the size
themselves.
* clutter/clutter-backend.c:
(clutter_backend_get_display_size): Provide a fallback for
backends not implementing get_display_size().
* clutter/clutter-stage.c:
(clutter_stage_allocate): Add debug messages.
* clutter/sdl/clutter-backend-sdl.c:
(clutter_backend_sdl_get_display_size),
(clutter_backend_sdl_class_init): Implement get_display_size()
on the SDL backend.
* clutter/clutter-backend.h:
* clutter/clutter-backend.c:
(clutter_backend_get_display_size): Add a function for getting the
display size out of the backend.
* clutter/clutter-stage.c:
(clutter_stage_allocate): When allocating on a backend with a
static stage, we simply ignore the passed box and override it with
the size of the display.
* clutter/eglnative/clutter-backend-egl.c:
(clutter_backend_egl_get_display_size),
(clutter_backend_egl_class_init): Implement get_display_size() by
returning the size of the EGL surface.
* clutter/fruity/clutter-backend-fruity.c:
(clutter_backend_egl_get_display_size),
(clutter_backend_egl_class_init): Ditto as above.
* clutter/x11/clutter-backend-x11.c:
(clutter_backend_x11_get_display_size),
(clutter_backend_x11_class_init): Implement get_display_size() by
returning the DisplayWidth and DisplayHeight of the current
screen.
(clutter_stage_win32_realize): Use a more direct method to choose
the best pixel format instead of ChoosePixelFormat because
otherwise if the display's depth is 16 then it will prefer the
non-accelerated software implementation when the requested depth
is 24.
* clutter/clutter-stage.c:
(clutter_stage_allocate): Check if the stage provided by the
backend is static (i.e. a framebuffer that cannot be resized)
and interrupt the allocation chain there.
* clutter/eglnative/clutter-stage-egl.c:
(clutter_stage_egl_class_init): Remove the ::allocate empty
stub.
actor clip being enabled or disabled in an actor paint
method. Otherwise the clip stack can be become unbalanced. This
was happening in ClutterEntry until it was fixed in revision 2983.
