This is similar to clutter_x11_{,un}trap_errors except that it stores
the previous trap state in a caller-allocated struct so that it can be
re-entrant.
Make _cogl_xlib_trap_errors re-entrant
(this will be squashed into an earlier commit)
The _cogl_texture_needs_premult_conversion function was already
checking whether the source format had an alpha channel before
returning TRUE, but it also doesn't make sense to do the premult
conversion if the destination format has no alpha. This patch adds
that check in too.
This adds the framework needed to check for winsys specific extensions
(such as GLX extensions) using a similar mechanism to the
cogl-feature-functions header. There is a separate
cogl-winsys-feature-functions header which will contain macros to list
the extensions and functions. cogl_create_context_winsys now calls
_cogl_feature_check for each of these functions. _cogl_feature_check
has had to be changed to accept the driver prefix as the first
parameter so that it can prepend "GLX" rather than "GL" in this case.
The Clutter X11 backend now passes all events through
_cogl_xlib_handle_event. This function can now internally be hooked
with _cogl_xlib_add_filter. These are added to a list of callbacks
which are all called in turn by _cogl_xlib_handle_event. This is
intended to be used internally in Cogl by any parts that need to see
Xlib events.
Cogl now also has an internally exposed function to set a pointer to
the Xlib display. This is stored in a global variable. The Clutter X11
backend sets this.
_cogl_xlib_handle_event and _cogl_xlib_set_display can be removed once
Cogl gains a proper window system abstraction.
This creates a separate struct to store the fields of the context that
are specific to the winsys. This is all stored in one file but ideally
this could work more like the CoglContextDriver struct and have a
different header for each winsys.
This adds an internal rectangle texture backend which is mostly based
on the CoglTexture2D backend. It will throw assert failures if any
operations are attempted that rectangle textures don't support, such
as mipmapping or hardware repeating.
Instead of the ensure_mipmaps virtual that is only called whenever the
texture is about to be rendered with a min filter that needs the
mipmap, there is now a pre_paint virtual that is always called when
the texture is about to be painted in any way. It has a flags
parameter which is used to specify whether the mipmap will be needed.
This is useful for CoglTexturePixmapX11 because it needs to do stuff
before painting that is unrelated to mipmapping.
Instead of having a hardcoded series of if-statements in
cogl_is_texture to determine which types should appear as texture
subclasses, they are now stored in a GSList attached to the Cogl
context. The list is amended to using a new cogl_texture_register_type
function. There is a convenience macro called COGL_TEXTURE_DEFINE
which uses COGL_HANDLE_DEFINE_WITH_CODE to register the texture type
when the _get_type() function is first called.
This macro is similar to COGL_HANDLE_DEFINE_WITH_CODE except that it
allows a snippet of code to be inserted into the _get_type()
function. This is similar to how G_DEFINE_TYPE_WITH_CODE
works. COGL_HANDLE_DEFINE is now just a wrapper around
COGL_HANDLE_DEFINE_WITH_CODE.
_cogl_texture_2d_externally_modified is a function specific to the
CoglTexture2D texture backend that should be called whenever the
contents of the texture are modified without the backend knowing about
it. It simply marks the mipmap tree as invalid.
The include path for the winsys and driver folder was given relative
to $(srcdir) so it would end up relative to the driver folder which is
wrong. It is now specified as $(srcdir)/../../winsys to get the right
location. The driver folder is removed because it is actually just
$(srcdir) and that is already included.
GLES2 doesn't provide user clip planes (you would have to use a vertex +
fragment shader to achieve the same kind of result) so we make sure not
to call glEnable/Disable with any of the GL_CLIP_PLANE0..3 defines.
http://bugzilla.o-hand.com/show_bug.cgi?id=2177
The function had a line like:
CoglMaterial *material =
material = _cogl_material_pointer_from_handle (material_handle);
where the duplicate "material =" wasn't intended, so this patch removes
it.
Under WGL, any functions that were defined after GL 1.1 are not
directly exported in the DLL so we need to reference them via the
function pointers. A new call to glActiveUnit was missed in
cogl-context.c
The window headers contain the line
#define near
so it's not possible to use the symbol 'near' in code that's portable
to Windows. This replaces it with 'near_val'.
I think the define is meant to improve compatibility with code written
for Windows 3.1 where near would be a keyword to make it a smaller
pointer size.
We don't need to generate a new ARBfp program for every material created
if we can find an ancestor whos state will result in the same program
being generated.
The more code we can have adopt the coding pattern of deriving their
materials from other similar materials using cogl_material_copy() the
more likely this metric will be good enough on its own to minimize the
set of arbfp programs necessary to support a given application.
Previously in _cogl_material_pre_change_notify we manually freed the
layer caches of a material if we caused a reparent, but it makes more
sense to have _cogl_material_set_parent do this directly instead.
This adds a _cogl_material_weak_copy() function that can be used to
create materials that don't count as strong dependants on their parents.
This means the parent can be modified without worrying about how it will
affect weak materials. The material age of the parent can potentially be
queried to determine if a weak material might need to be re-created.
When we add support for weak materials it's expected that Clutter will
want to attach them as private data to other materials and it needs a
mechanism to determine when a weak material should be re-created because
its parent has changed somehow.
This adds the concept of a material age (internal only currently) which
increments whenever a material is modified. Clutter can then save the
age of the material which its weak materials are derived from and later
determine when the weak material may be invalid.
In _cogl_texture_quad_multiple_primitives we weren't memsetting the
CoglMaterialWrapModeOverrides structure we were memsetting
&state.wrap_mode_overrides where state.wrap_mode_overrides is just a
pointer that might potentially later point to the
CoglMaterialWrapModeOverrides structure.
In _cogl_material_equal we were repeating the same code pattern to
compare several of the state groups so this just adds
simple_property_equal function that's now used instead.
This redirects the legacy depth testing APIs through CoglMaterial and
adds a new experimental cogl_material_ API for handling the depth
testing state.
This adds the following new functions:
cogl_material_set_depth_test_enabled
cogl_material_get_depth_test_enabled
cogl_material_set_depth_writing_enabled
cogl_material_get_depth_writing_enabled
cogl_material_set_depth_test_function
cogl_material_get_depth_test_function
cogl_material_set_depth_range
cogl_material_get_depth_range
As with other experimental Cogl API you need to define
COGL_ENABLE_EXPERIMENTAL_API to access them and their stability isn't
yet guaranteed.
cogl_ortho is one of those APIs whos style was, for better or worse,
copied from OpenGL and for some inexplicable reason the near and far
arguments are inconsistent with the left, right, top, bottom arguments
because they don't take z coordinates they take a "distance" which
should be negative for a plane behind the viewer.
This updates the documentation to explain this.
The internal CoglMaterialLayer pointers associated with a material may
change whenever layer properties are modified so it's no longer ok to
assume that a list of layers returned by cogl_material_get_layers
remains valid if the layers have been changed.
Since it can sometimes be awkward to figure out where a particular
material came from when debugging, this adds a breadcrumb mechanism that
lets you associate a const string with a material that may give a clue
about its origin.
As a follow on to using cogl_material_copy instead of flush options this
patch now removes the ability to pass flush options to
_cogl_material_equal which is the final reference to the
CoglMaterialFlushOptions mechanism.
Since cogl_material_copy should now be cheap to use we can simplify
how we handle fallbacks and wrap mode overrides etc by simply copying
the original material and making our override changes on the new
material. This avoids the need for a sideband state structure that has
been growing in size and makes flushing material state more complex.
Note the plan is to eventually use weak materials for these override
materials and attach these as private data to the original materials so
we aren't making so many one-shot materials.
This is a complete overhaul of the data structures used to manage
CoglMaterial state.
We have these requirements that were aiming to meet:
(Note: the references to "renderlists" correspond to the effort to
support scenegraph level shuffling of Clutter actor primitives so we can
minimize GPU state changes)
Sparse State:
We wanted a design that allows sparse descriptions of state so it scales
well as we make CoglMaterial responsible for more and more state. It
needs to scale well in terms of memory usage and the cost of operations
we need to apply to materials such as comparing, copying and flushing
their state. I.e. we would rather have these things scale by the number
of real changes a material represents not by how much overall state
CoglMaterial becomes responsible for.
Cheap Copies:
As we add support for renderlists in Clutter we will need to be able to
get an immutable handle for a given material's current state so that we
can retain a record of a primitive with its associated material without
worrying that changes to the original material will invalidate that
record.
No more flush override options:
We want to get rid of the flush overrides mechanism we currently use to
deal with texture fallbacks, wrap mode changes and to handle the use of
highlevel CoglTextures that need to be resolved into lowlevel textures
before flushing the material state.
The flush options structure has been expanding in size and the structure
is logged with every journal entry so it is not an approach that scales
well at all. It also makes flushing material state that much more
complex.
Weak Materials:
Again for renderlists we need a way to create materials derived from
other materials but without the strict requirement that modifications to
the original material wont affect the derived ("weak") material. The
only requirement is that its possible to later check if the original
material has been changed.
A summary of the new design:
A CoglMaterial now basically represents a diff against its parent.
Each material has a single parent and a mask of state that it changes.
Each group of state (such as the blending state) has an "authority"
which is found by walking up from a given material through its ancestors
checking the difference mask until a match for that group is found.
There is only one root node to the graph of all materials, which is the
default material first created when Cogl is being initialized.
All the groups of state are divided into two types, such that
infrequently changed state belongs in a separate "BigState" structure
that is only allocated and attached to a material when necessary.
CoglMaterialLayers are another sparse structure. Like CoglMaterials they
represent a diff against their parent and all the layers are part of
another graph with the "default_layer_0" layer being the root node that
Cogl creates during initialization.
Copying a material is now basically just a case of slice allocating a
CoglMaterial, setting the parent to be the source being copied and
zeroing the mask of changes.
Flush overrides should now be handled by simply relying on the cheapness
of copying a material and making changes to it. (This will be done in a
follow on commit)
Weak material support will be added in a follow on commit.
We were incorrectly guarding the use of GL_TEXTURE_RECTANGLE_ARB with
ifdef ARB_texture_rectangle instead of ifdef GL_ARB_texture_rectangle
which broke test-cogl-texture-rectangle.
This was mistakenly added some time ago because at some point when we
were discussing how to handle premultiplied alpha in Clutter/Cogl we
were considering having a magic "just do the right thing" option which
was later abandoned.
This is to try and improve API consistency. Simple cogl structures that
don't derive from CoglObject and which can be allocated on the stack,
such as CoglColor and CoglMatrix should all have "_init" or
"_init_from" functions to initialize all the structure members. (As
opposed to a cogl_xyz_new() function for CoglObjects). CoglColor
previously used the naming scheme "_set_from" for these initializers but
"_set" is typically reserved for setting individual properties of a
structure/object.
This adds three _init functions:
cogl_color_init_from_4ub
cogl_color_init_from_4f
cogl_color_init_from_4fv
The _set_from functions are now deprecated but only with a gtk-doc
annotation for now. This is because the cogl_color_set_from API is quite
widely used already and so were giving a grace period before enabling a
GCC deprecated warning just because otherwise the MX maintainers will
complain to me that I've made their build logs look messy.
The journal logs colors as 4bytes into a vertex array and since we are
planning to make CoglMaterial track its color using a CoglColor instead
of a byte array this convenience will be useful for re-implementing
_cogl_material_get_colorubv.
Some internal symbols used for the GLES 2 wrapper were accidentally
being exported. This prepends an underscore to them so they won't
appear in the shared library.
Whenever a path or a rectangle is added to the clip stack it now also
stores a screen space bounding box in the entry. Then when the clip
stack is flushed the bounding box is first used to set up the
scissor. That way when we eventually come to use the stencil buffer
the clear will be affected by the scissor so we don't have to clear
the entire buffer.
_cogl_path_get_bounds is no longer static and is exported in
cogl-path-private.h so that it can be used in the clip stack code. The
old version of the function returned x/y and width/height. However
this was mostly used to call cogl_rectangle which takes x1/y1
x2/y2. The function has been changed to just directly return the
second form because it is more useful. Anywhere that was previously
using the function now just directly looks at path->path_nodes_min and
path->path_nodes_max instead.
The transform_point function takes a modelview matrix, projection
matrix and a viewport and performs all three transformations on a
point to give a Cogl window coordinate. This is useful in a number of
places in Cogl so this patch moves it to cogl.c and adds it to
cogl-internal.h
For sliced 2D textures, _cogl_texture_2d_sliced_get_data() uses the
bitmap width, instead of the rowstride, when memcpy()ing into the
dest buffer.
Signed-off-by: Robert Bragg <robert@linux.intel.com>
We only had getters for the red, green, blue and alpha channels of a
color. This meant that, if you wanted to change, say, the alpha
component of a color, one would need to query the red, green and blue
channels and use set_from_4ub() or set_from_4f().
Instead of this, just provide some setters for CoglColor, using the same
naming scheme than the existing getters.
For some operations on pre-multiplied colors (say, replace the alpha
value), you need to unpremultiply the color.
This patch provides the counterpart to cogl_color_premultiply().
The place where we actually change the framebuffer is
_cogl_framebuffer_flush_state(), so if we changed to a new frame buffer
we need to initialize the color bits there.
http://bugzilla.openedhand.com/show_bug.cgi?id=2094
OpenGL 3.0 deprecated querying of the GL_{RED,GREEN,BLUE}_BITS
constants, and the FBO extension provides a mechanism to query for the
color buffer sizes which *should* work even with the default
framebuffer. Unfortunately, this doesn't seem to hold for Mesa - so we
just use this for the offscreen CoglFramebuffer type, and we fall back
to glGetIntegerv() for the onscreen one.
http://bugzilla.openedhand.com/show_bug.cgi?id=2094
This function had two problems. Firstly it would clear the enable
blend flag before calling pre_change_notify so that if blending was
previously enabled the journal would end up being flushed while the
flag was still cleared. Secondly it would call the pre change notify
whenever blending is needed regardless of whether it was already
needed previously.
This was causing problems in test-depth.
This adds a _cogl_bind_gl_texture_transient function that should be used
instead of glBindTexture so we can have a consistent cache of the
textures bound to each texture unit so we can avoid some redundant
binding.
As part of an effort to improve the architecture of CoglMaterial
internally this overhauls how we flush layer state to OpenGL by adding a
formal backend abstraction for fragment processing and further
formalizing the CoglTextureUnit abstraction.
There are three backends: "glsl", "arbfp" and "fixed". The fixed backend
uses the OpenGL fixed function APIs to setup the fragment processing,
the arbfp backend uses code generation to handle fragment processing
using an ARBfp program, and the GLSL backend is currently only there as
a formality to handle user programs associated with a material. (i.e.
the glsl backend doesn't yet support code generation)
The GLSL backend has highest precedence, then arbfp and finally the
fixed. If a backend can't support some particular CoglMaterial feature
then it will fallback to the next backend.
This adds three new COGL_DEBUG options:
* "disable-texturing" as expected should disable all texturing
* "disable-arbfp" always make the arbfp backend fallback
* "disable-glsl" always make the glsl backend fallback
* "show-source" show code generated by the arbfp/glsl backends
_cogl_atlas_texture_blit_begin binds a texture to use as the
destination and it expects it to stay bound until
_cogl_atlas_texture_end_blit is called. However there was a call to
_cogl_journal_flush directly after setting up the blit state which
could cause the wrong texture to be bound. This just moves the flush
to before the call to _cogl_atlas_texture_blit_begin.
This was breaking test-cogl-sub-texture.
1) Always flush when migrating textures out of an atlas because although
it's true that the original texture data will remain valid in the
original texture we can't assume that journal entries have resolved the
GL texture that will be used. This is only true if a layer0_override has
been used.
2) Don't flush at the point of creating a new atlas simply flush
immediately before reorganizing an atlas. This means we are now assuming
that we will never see recursion due to atlas textures being modified
during a journal flush. This means it's the responsibility of the
primitives code to _ensure_mipmaps for example not the responsibility of
_cogl_material_flush_gl_state.
We want to make sure that the material state flushing code will never
result in changes to the texture storage for that material. So for
example mipmaps need to be ensured by the primitives code.
Changes to the texture storage will invalidate the texture coordinates
in the journal and we want to avoid a recursion of journal flushing.
This adds a way to compare two CoglMatrix structures to see if they
represent the same transformations. memcmp can't be used because a
CoglMatrix contains private flags and padding.
THIS IS A WORK IN PROGRESS
Mesa is building a big shader when using ARB_texture_env_combine. The
idea is to bypass that computation, do it ourselves and cache the
compiled program in a CoglMaterial.
For now that feature can be enabled by setting the COGL_PIPELINE
environment variable to "arbfp". COGL_SHOW_FP_SOURCE can be set to a non
empty string to dump the fragment program source too.
TODO:
* fog (really easy, using OPTION)
* support tex env combiner operands, DOT3, ADD_SIGNED, INTERPOLATE
combine modes (need refactoring the generation of temporary
variables) (not too hard)
* alpha testing for GLES 2.0?
The Cogl context has now a feature_flags_private enum that will allow us
to query and use OpenGL features without exposing them in the public
API.
The ARB_fragment_program extension is the first user of those flags.
Looking for this extension only happens in the gl driver as the gles
drivers will not expose them.
One can use _cogl_features_available_private() to check for the
availability of such private features.
While at it, reindent cogl-internal.h as described in CODING_STYLE.
At two places in cogl_wrap_prepare_for_draw it was trying to loop over
the texture units to flush some state. However it was retrieving the
texture unit pointer using w->active_texture_unit instead of the loop
index so it would end up with the wrong state.
Also in glEnableClientState it was using the active unit instead of
the client active unit.
• 3 general fixes (typos, copy/paste),
• ignore cogl-object-private.h,
• cogl_fixed_atani() was in reality cogl_fixed_atan(), fixed in commit
43564f05.
• Fix the cogl-vector section: sections must have a </SECTION> tag at
the end. Also the cogl-vector section was added in the middle of the
cogl-buffer one. Let's shiffle it out and add that </SECTION> tag.
As with a351ff2af earlier, distributing headers generated at configure
time conflicts with out of tree builds as the distributed headers will
be included first instead of including the generated ones.
This provides a mechanism for associating private data with any
CoglObject. We expect Clutter will use this to associate weak materials
with normal materials.
This replaces the use of CoglHandle with strongly type CoglClipStack *
pointers instead. The only function not converted for now is
cogl_is_clip_stack which will be done in a later commit.
This replaces the use of CoglHandle with strongly type CoglBitmap *
pointers instead. The only function not converted for now is
cogl_is_bitmap which will be done in a later commit.
This replaces the use of CoglHandle with strongly type CoglPath *
pointers instead. The only function not converted for now is
cogl_is_path which will be done in a later commit.
This patch makes it so that only the backwards compatibility
COGL_HANDLE_DEFINE macro defines a _cogl_xyz_handle_new function. The
new COGL_OBJECT_DEFINE macro only defines a _cogl_xyz_object_new
function.
It's valid C to declare a function omitting it prototype, but it seems
to be a good practise to always declare a function with its
corresponding prototype.
While this is totally fine (0 in the pointer context will be converted
in the right internal NULL representation, which could be a value with
some bits to 1), I believe it's clearer to use NULL in the pointer
context.
It seems that, in most case, it's more an overlook than a deliberate
choice to use FALSE/0 as NULL, eg. copying a _COGL_GET_CONTEXT (ctx, 0)
or a g_return_val_if_fail (cond, 0) from a function returning a
gboolean.
This replaces the use of CoglHandle with strongly type CoglBuffer *
pointers instead. The only function not converted for now is
cogl_is_buffer which will be done in a later commit.
CoglHandle is a common source of complaints and confusion because people
expect a "handle" to be some form of integer type with some indirection
to lookup the corresponding objects as opposed to a direct pointer.
This patch starts by renaming CoglHandle to CoglObject * and creating
corresponding cogl_object_ APIs to replace the cogl_handle ones.
The next step though is to remove all use of CoglHandle in the Cogl APIs
and replace with strongly typed pointer types such as CoglMaterial * or
CoglTexture * etc also all occurrences of COGL_INVALID_HANDLE can just
use NULL instead.
After this we will consider switching to GTypeInstance internally so we
can have inheritance for our types and hopefully improve how we handle
bindings.
Note all these changes will be done in a way that maintains the API and
ABI.
Since the default alpha test function of GL_ALWAYS is equivalent to
GL_ALPHA_TEST being disabled we don't need to worry about Enabling/Disabling
it when flushing material state, instead it's enough to leave it always
enabled. We will assume that any driver worth its salt wont incur any
additional cost for glEnable (GL_ALPHA_TEST) + GL_ALWAYS vs
glDisable (GL_ALPHA_TEST).
This patch simply calls glEnable (GL_ALPHA_TEST) in cogl_create_context
When _cogl_disable_other_texcoord_arrays is called it disables the
neccessary texcoord arrays and then removes the bits for the disabled
arrays in ctx->texcoord_arrays_enabled. However none of the places
that call the function then set any bits in ctx->texcoord_arrays_enabled
so the arrays would never get marked and they would never get disabled
again.
This patch just changes it so that _cogl_disable_other_texcoord_arrays
also sets the corresponding bits in ctx->texcoord_arrays_enabled.
Instead of directly using a guint32 to store a bitmask for each used
texcoord array, it now stores them in a CoglBitmask. This removes the
limitation of 32 layers (although there are still other places in Cogl
that imply this restriction). To disable texcoord arrays code should
call _cogl_disable_other_texcoord_arrays which takes a bitmask of
texcoord arrays that should not be disabled. There are two extra
bitmasks stored in the CoglContext which are used temporarily for this
function to avoid allocating a new bitmask each time.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
This implements a growable array of bits called CoglBitmask. The
CoglBitmask is intended to be cheap if less than 32 bits are used. If
more bits are required it will allocate a GArray. The type is meant to
be allocated on the stack but because it can require additional
resources it also has a destroy function.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
Previously the counter for the number of layers was only updated
whenever the texture handle for a layer changes. However there are
many other ways for a new layer to be created for example by setting a
layer combine constant. Also by default the texture on a layer is
COGL_INVALID_HANDLE so if the application tries to create an explicit
layer with no texture by calling cogl_material_set_layer with
COGL_INVALID_HANDLE then it also wouldn't update the count.
This patch fixes that by incrementing the count in
cogl_material_get_layer instead. This function is called by all
functions that may end up creating a layer so it seems like the most
appropriate place.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
It should be quite acceptable to use a texture without defining any
texture coords. For example a shader may be in use that is doing
texture lookups without referencing the texture coordinates. Also it
should be possible to replace the vertex colors using a texture layer
without a texture but with a constant layer color.
enable_state_for_drawing_buffer no longer sets any disabled layers in
the overrides. Instead of counting the number of units with texture
coordinates it now keeps them in a mask. This means there can now be
gaps in the list of enabled texture coordinate arrays. To cope with
this, the Cogl context now also stores a mask to track the enabled
arrays. Instead of code manually iterating each enabled array to
disable them, there is now an internal function called
_cogl_disable_texcoord_arrays which disables a given mask.
I think this could also fix potential bugs when a vertex buffer has
gaps in the texture coordinate attributes that it provides. For
example if the vertex buffer only had texture coordinates for layer 2
then the disabling code would not disable the coordinates for layers 0
and 1 even though they are not used. This could cause a crash if the
previous data for those arrays is no longer valid.
http://bugzilla.openedhand.com/show_bug.cgi?id=2132
This adds a math utility API for handling 3 component, single precision
float vectors with the following; mostly self explanatory functions:
cogl_vector3_init
cogl_vector3_init_zero
cogl_vector3_equal
cogl_vector3_equal_with_epsilon
cogl_vector3_copy
cogl_vector3_free
cogl_vector3_invert
cogl_vector3_add
cogl_vector3_subtract
cogl_vector3_multiply_scalar
cogl_vector3_divide_scalar
cogl_vector3_normalize
cogl_vector3_magnitude
cogl_vector3_cross_product
cogl_vector3_dot_product
cogl_vector3_distance
Since the API is experimental you will need to define
COGL_ENABLE_EXPERIMENTAL_API before including cogl.h if you want to use
the API.
This stubs out an xlib event handling mechanism for Cogl. The intention
is for Clutter to use this to forward all x11 events to Cogl. As we move
winsys functionality down into Cogl, Cogl will become responsible for
handling a number of X events: ConfigureNotify events for onscreen
framebuffers, swap events and Damage events for cogl_x11_texture_pixmap.
Previously it would only try to set the blend equation if the RGB and
alpha blending functions were different. However it's completely valid
to use a non-standard blending function when the functions are the
same. This patch moves the blending equation to outside the if
statement.
Previously it would only set the blend constant if glBlendFuncSeparate
was used but it is perfectly acceptable to use the blend constant when
the same factor is used for each. It now sets the blend constant
whenever one of the factors would use the constant.
When a single statement is used to specify the factors for both the
RGB and alpha parts it previously split up the statement into
two. This works but it ends up unnecessarily using glBlendFuncSeparate
when glBlendFunc would suffice.
For example, the blend statement
RGBA = ADD(SRC_COLOR*(SRC_COLOR), DST_COLOR*(1-SRC_COLOR))
would get split into the two statements
RGBA = ADD(SRC_COLOR*(SRC_COLOR[RGB]), DST_COLOR*(1-SRC_COLOR[RGB]))
A = ADD(SRC_COLOR*(SRC_COLOR[A]), DST_COLOR*(1-SRC_COLOR[A]))
That translates to:
glBlendFuncSeparate (GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR,
GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
This patch makes it so that arg_to_gl_blend_factor can handle the
combined RGBA mask instead. That way the single statement gets
translated to the equivalent call:
glBlendFunc (GL_SRC_COLOR, GL_ONE_MINUS_SRC_COLOR);
Previously a path copy was implemented such that only the array of
path nodes was shared with the source and the rest of the data is
copied. This was so that the copy could avoid a deep copy if the
source path is appended to because the copy keeps track of its own
length. This optimisation is probably not worthwhile because it makes
the copies less cheap. Instead the CoglPath struct now just contains a
single pointer to a new CoglPathData struct which is separately
ref-counted. When the path is modified it will be copied if the ref
count on the data is not 1.
Since framebuffer state is not flushed prior to replaying the journal,
the trick of marking the framebuffer dirty prior to calling
glBindFramebuffer() doesn't work... the outstanding journal entries
will get replayed to the newly created framebuffer.
Fix this by flushing the journal as well.
http://bugzilla.openedhand.com/show_bug.cgi?id=2110
Signed-off-by: Robert Bragg <robert@linux.intel.com>
If the clip stack is empty then _cogl_clip_stack_flush exits
immediately. This was missing out the assignment of *stencil_used_p at
the bottom of the function. If a path is then used after the clip is
cleared then it would think it needs to merge with the clip so the
stencil would not be cleared correctly.
Instead of using cogl_get_bitmasks() to query the GL machinery for the
size of the color bits, we should store the values inside the
CoglFramebuffer object and query them the first time we set the framebuffer
as the current one.
Currently, cogl_get_bitmasks() is re-implemented in terms of
cogl_framebuffer_get_*_bits(). As soon as we are able to expose the
CoglOnscreen framebuffer object in the public API we'll be able to
deprecate cogl_get_bitmasks() altogether.
http://bugzilla.openedhand.com/show_bug.cgi?id=2094
In 91cde78a7 I accidentally changed the function names that get looked
up for the framebuffer extension under GLES so that they didn't have
any suffix. The spec for extension specifies that they should have the
OES suffix.
Debugging code is not meant to be run in the nominal code path. Use
G_UNLIKELY to be reduce the number of bubbles in the instruction
pipeline.
Took the opportunity to re-indent the macros.
