clutter_actor_paint() implements a clear preference for custom clips
over clip_to_allocation: If a custom clip is set, clip_to_allocation is
ignored.
Since the paint volume reflects what Clutter is going to paint, we
should handle it the same when putting together our paint volume: So
first handle custom clips, and if one is set, use that. Then handle
clip_to_allocation, and if that's set, use that. And finally, if both
aren't set, union our allocation with the children paint volumes to get
the building volume.
clutter_actor_paint() also doesn't check whether the custom clip is
empty: If that's the case, it will simply not paint anything. Given that
that's allowed by clutter_actor_paint(), the paint volume should also
follow here and return an empty paint volume in case the custom clip is
empty.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1592>
When a custom clip is set for an actor, this actor is not going to allow
any painting outside that clip. That includes the children, which may
also not paint outside that clip.
Now in case clip_to_allocation is set to TRUE, we already already do the
right thing and simply use the allocation as our paint volume, ignoring
the volumes of our children. The same should be done for the custom
clip, so also stop the process of building the paint volume once we see
that a custom clip is set and simply use that clip.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1592>
When using CLUTTER_DEBUG_PAINT_DAMAGE_REGION, the blue swap region is
always a superset of the red redraw region. So painting both in full (since
the previous commit) just meant the red region was overdrawn and came out
purple. That doesn't provide enough visual contrast, changes the user
experience unexpectedly and reduces performance.
So just subtract the redraw region from the swap region. This way the
red redraw region is always red, not purple.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1571>
Previously when CLUTTER_DEBUG_PAINT_DAMAGE_REGION was set, that would lead
to has_buffer_age==FALSE, which would lead to use_clipped_redraw==FALSE
which would mean swap_region was always empty. And so the blue region of
CLUTTER_DEBUG_PAINT_DAMAGE_REGION was always empty, *and* fb_clip_region
was always the full view rectangle which is not useful for debugging.
Now when CLUTTER_DEBUG_PAINT_DAMAGE_REGION is set, we don't let that
affect use_clipped_redraw, which means fb_clip_region is calculated
realistically.
But that's not enough. Calculating fb_clip_region properly with
CLUTTER_DEBUG_PAINT_DAMAGE_REGION would still lead to colouring artefacts
left on screen from previous frames that don't apply to the current frame.
So to fix that we also paint_stage for the whole screen every time when
using CLUTTER_DEBUG_PAINT_DAMAGE_REGION.
So now you will only ever see red and blue shading that's applicable to
the current frame, and no artefacts from the previous frames.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1535
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1571>
It was being painted without scaling and offsetting so would only look
right at scale 1.0 and only on the view with origin (0,0). Now we include
the framebuffer scale and view origin it will be painted in the correct
location.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1571>
As explained in https://gitlab.gnome.org/GNOME/mutter/-/issues/1494,
with commit 29caa5bea5 we stopped queueing
a relayout for the parent of the removed actor in
clutter_actor_remove_child_internal(). This relayout was, as opposed to
the relayout in clutter_actor_real_hide()/clutter_actor_real_unmap(),
queued unconditionally without looking at the parents NO_LAYOUT flag.
Now while that relayout in clutter_actor_remove_child_internal() would
do unnecessary work if the parent had the NO_LAYOUT flag set, it did
also queue a redraw of the parent, which is necessary in any case.
So by removing that relayout in clutter_actor_remove_child_internal(),
we stopped queueing redraws for NO_LAYOUT parents when a child gets
removed from the scenegraph. This caused bugs where the texture of the
child would be left visible on the screen even though the child got
destroyed.
To fix this, make sure again that we always queue a redraw on the parent
when unmapping a child.
Fixes https://gitlab.gnome.org/GNOME/mutter/-/issues/1494
The redraw_pending boolean is used to schedule the first stage update
after starting Clutter. This flag is superfluous because we have the
pending_finish_queue_redraws flag which does the same.
While at it, also remove the redraw_count debug variable, since there
should be better ways to count the number of queued redraws nowadays,
for example Sysprof marks.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1527
Queueing a redraw with a clip is easy enough and this function is
private anyway, so remove it and call _clutter_actor_queue_redraw_full()
instead in the one function using it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1527
ClutterRedrawFlags are a way to give Clutter additional context
about what it needs to redraw. There currently is only one flag defined,
CLUTTER_REDRAW_CLIPPED_TO_ALLOCATION, this flag would clip the redraw to
the actors current allocation.
Since ClutterActor also provides the clip_to_allocation property (which
affects the paint volume of the actor instead of only one redraw), the
additional CLIPPED_TO_ALLOCATION flag seems unnecessary. It's also only
defined to be used privately in Clutter, which it never is, so let's
remove it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1527
Turns out the g_signal_has_handler_pending() call in
update_stage_views() is actually more expensive than comparing the
sorted list (which is usually very short), so remove that and simply
always emit the signal.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1524
This commit introduces a few important changes in order to
acommodate graphene_ray_t. Most of them are positive changes,
so don't panic :)
The first very visible change is that neither the actor box
nor the clip rectangles are projected before being pushed.
This required changing the parameters of the related functions
at both ClutterPickContext, and ClutterPickStack, to receive
boxes instead of vertices. These rectangles are projected on
demand now, so in the best case (first actor picked) only
one projection happens; and in the worst case, it projects
as much as it does now.
The second important change is that there are no more checks
for axis-alignment anymore. That's because picking now happens
in 3D space, using triangles.
Talking about triangles in 3D space, this is what is used now
for picking. We break down each actor rectangle in 2 triangles,
and check if the projected pick point is inside any one of them,
of if the ray intersects any one of them. The same check happens
for the clip rectangles.
Checking the projected pick point is both an optimization for the
2D case, and a workaround to graphene_ray_t problems with float
precision, which is specially visible on edges such as the top
bar.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1509
ClutterPickStack is a new boxed type that stores the vertices
and clip rectangles. It is meant to be a byproduct of picking,
and takes over most of what ClutterStage currently does.
It introduces a 'seal' system, inspired by MetaKmsUpdate. After
the pick operation is done, and the rectangles are collected,
the pick stack is sealed, and is not allowed to be externally
modified anymore. Internally, it still can invalidate pick
records when an actor is destroyed.
For now, it handles both the clip rectangles, and the matrix
stack, separatedly. Future commits will rearrange this.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1509
The "paint" signal of ClutterActor has been a pain for everyone involved
long enough now, turns out we actually use it nowhere except tests
anymore (which has been handled in the last commits), so get rid of it
for good before anyone starts using it again.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1522
This is a bit scattered around, with the setter/getter in Clutter, and
it only being only directly honored in Wayland (it goes straight through
device properties in X11).
Make this private native API, and out of public ClutterInputDevice API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1486
Since commit eb9cd3857d we initialize the allocation of ClutterActors to
an UNINITIALIZED ClutterActorBox. We do that to ensure the actor even
emits notify::allocation in case it got a new valid allocation of
0,0,0,0.
Now there's still the case where an actor gets removed from the
scenegraph and added again to a different parent, in this case we still
don't emit notify::allocation right now in case the new allocation
equals the old one. There's two good reasons to do so though:
1) To Clutter, there's no difference between a newly created actor and
an actor which got removed from the scenegraph, it's not consistent to
always notify the allocation property in the former situation, but not
always notify it in the latter situation.
2) When an allocation changes, Clutter notifies the subtree of that
actor about an absolute geometry change (see the call to
transform_changed() in clutter_actor_set_allocation_internal()). Now
when an actor gets reparented, obviously the absolute geometry might
change, so to make sure transform_changed() is always called in that
case we need to make sure an allocation change happens.
So simply reset the allocation property of the actor to an UNINITIALIZED
ClutterActorBox as soon as it gets unrealized.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1498
We introduced the absolute_origin_changed flag when preparing for the
removal of ClutterAllocationFlags in commit dc8e5c7f8b. Turns out in the
mean-time commit df4eeff6f2 happened, which renders the whole
absolute_origin_changed flag moot.
That's because we now notify the whole subtree about the absolute origin
change by calling transform_changed() when the allocation of an actor
changes. transform_changed() traverses the subtree and calls
absolute_geometry_changed() on every actor immediately, which renders
the whole propagation of the absolute_origin_changed flag obsolete.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1498
Since we now moved the queuing of relayouts into the mapping and
unmapping functions, we no longer need to do it when adding or removing
a child, that's because removing a child always unmaps the child, and
adding it to a stage (if it's visible) will map it.
So remove those calls to queue_relayout() since they're no longer
needed.
With the above we no longer queue a relayout in
clutter_actor_add_child_internal(), that means there's one place where
we need to explicitely queue relayouts now: That's when using the
set_child_at_index/above/below() APIs, those are special because they
avoid unmapping and mapping of actors and would now no longer get a
relayout.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
In theory there's no big difference between only handling mapped actors
vs only handling visible actors in clutter_actor_allocate(): The
function is called recursively starting with an actor that is attached
to a stage, so it should only be called on mapped actors anyway.
The behavior of skipping hidden actors was introduced as an optimization
with commit 0eab73dc. Since the last commit, we handle
enable_paint_unmapped a bit better and don't do unnecessary work when
mapping or unmapping, so we can now be a bit stricter enforcing our
invariants and only allow mapped actors in clutter_actor_allocate().
We need to exclude toplevel actors from this check since the stage has a
very different mapped state than normal actors, depending on the
mappedness of the x11 window. Also we need to make an exception for
clones (of course...): Those need their source actor to have an
allocation, which means they might try to force-allocate it, and in that
case we shouldn't bail out of clutter_actor_allocate().
Also moving the clutter_actor_queue_relayout() call from
clutter_actor_real_show() to clutter_actor_real_map() seems to fix a bug
where we don't queue redraws/relayouts on children when a parent gets
shown.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2973https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1366
