This grab was added in commit caf43a123fhttps://bugzilla.gnome.org/show_bug.cgi?id=381127
to minimize window flickering when switching workspaces.
While this grab is held, some signals are emitted to the shell,
which can lead to deadlocks (reproduced under Mali binary OpenGLESv2
drivers).
Now that we are a compositing window manager, we do not have to
worry about flickers, this grab should no longer be necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=721709
Under some circumstances, for example when the display controller driver
doesn't report back the correct EDID, or under VirtualBox, Mutter
returns suboptimal strings for an output display name, leading to funny
labels like 'Unknown 0"', or '(null) 0"' in the Settings panel.
This commit improves our heuristic in three ways:
- we now avoid putting inches in the display name if either dimension is
zero
- we use the vendor name in case we're not able to lookup its PnP id
from the database. Previously we would have passed over '(null)'
- as a special edge-case, when neither inches nor vendor are known, we
use the string 'Unknown Display'
Finally, we make the combined vendor + inches string translatable, as
different languages might want to move the size part of the string to a
position different than the end.
https://bugzilla.gnome.org/show_bug.cgi?id=721674
Remove some obvious server grabs from the window creation codepath,
also ones that are taken at startup.
During startup, there is no need to grab: we install the event handlers
before querying for the already-existing windows, so there is no danger
that we will 'lose' some window. We might try to create a window twice
(if it comes back in the original query and then we get an event for it)
but the code is already protected against such conditions.
When windows are created later, we also do not need grabs, we just need
appropriate error checking as the window may be destroyed at any time
(or it may have already been destroyed).
The stack tracker is unaffected here - as it listens to CreateNotify and
DestroyNotify events and responds directly, the internal stack
representation will always be consistent even if the window goes away while
we are processing MapRequest or similar.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
The return code of XGetWindowAttributes() indicates whether an error
was encountered or not. There is no need to specifically check the error
trap.
The trap around XAddToSaveSet() was superfluous. We have a global error
trap to ignore any errors here, and there is no need to XSync() as GDK
will later ignore the error asynchronously if one is raised.
Also move common error exit path to an error label.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
In meta_screen_manage_all_windows() we can use our own stack
tracker to get the list of windows - no need to query X again.
A copy is needed because the stack gets modified as part of the loop.
Specifically, meta_stack_tracker_get_stack() at this time returns the
predicted stack, and meta_window_new() performs a few operations
(e.g. framing) which cause immediate changes to the predicted stack.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
meta_window_ensure_frame() creates its own grab and has a comment
claiming that it must be called under a grab too.
But the reasoning given in the comment does not seem relevant here.
We only frame non-override-redirect windows, so we are creating
the frame in response to MapRequest. There is no way that the child
could receive a MapNotify at this point, since that only happens
much later, once we go through the CALC_SHOWING queue and call
XMapWindow() from meta_window_show().
Remove the unnecessary grab.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
Server grabs are not as evil as you might expect, but there is agreement
in that their usage should be limited.
Server grabs can cause things to go rather wrong when mutter emits
a signal while it has grabbed the server. If the receiver of that signal
waits for a synchronous action performed by another client, then you
have a deadlock. This happens with Mali binary GLESv2 drivers :(
https://bugzilla.gnome.org/show_bug.cgi?id=721345
The compositor code used to handle X windows that didn't have a
corresponding MetaWindow (see commit d538690b), which is why the
attribute query is separated.
As that doesn't happen any more, we can clean up. No functional changes.
Suggested by Owen Taylor.
https://bugzilla.gnome.org/show_bug.cgi?id=721345
When we move focus elsewhere when unmanaging a window, we *need* to move
the focus, so if the target is globally active, move the focus to the
no-focus-window in anticipation that the focus will normally get moved
to the right window when the target window responds to WM_TAKE_FOCUS.
If the window doesn't respond to WM_TAKE_FOCUS, then focus will be left
on the no-focus-window, but there's no way to distinguish whether the
app will respond or not.
https://bugzilla.gnome.org/show_bug.cgi?id=711618
When a client spontaneously focuses their window, perhaps in response
to WM_TAKE_FOCUS we'll get a FocusOut/FocusIn pair with same serial.
Updating display->focus_serial in response to FocusOut then was causing
us to ignore FocusIn and think that the focus was not on any window.
We need to distinguish this spontaneous case from the case where we
set the focus ourselves - when we set the focus ourselves, we're careful
to combine the SetFocus with a property change so that we know definitively
what focus events we have already accounted for.
https://bugzilla.gnome.org/show_bug.cgi?id=720558
Initial placement during meta_window_constrain() can result in changes
to the borders, so we need to recompute our border sizes after
constraining. This fixes incorrect window borders on
initially maximized windows.
https://bugzilla.gnome.org/show_bug.cgi?id=720417
Currently the only way to move a window to another monitor via
keyboard is to start a move operation and move it manually using
arrow keys. We do have all the bits of a dedicated keybinding in
place already, so offer it as a more comfortable alternative.
https://bugzilla.gnome.org/show_bug.cgi?id=671054
The shadow is added in the paint step, not as a separate actor,
so the raise is a no-op. It also gets rid of an annoying misspelling
that's driving me crazy.
Some drivers which support RandR 1.4 may not support setting
or getting the primary output, therefore mutter should trap
and ignore any relevant errors.
The modesetting driver exposes this problem when used in
combination with the nvidia binary driver using RandR 1.4
offloading.
Also use a local display variable instead of calling
meta_get_display () every time.
When unmaximizing, we changed bits of window state, then called out
to code that used the frame extents *before* we cleared old cached
extents. Clear the cache up-front as soon as we change the window
state.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
In the past, MetaWindowGroup was allocated the size of the screen and
painted the size of the screen because it contained the screen background,
but now we also have the "top window group" which contains only popup
windows, so the allocation doesn't properly reflect the paint bounds
of the window group. Compute the paint bounds accurately from the
children.
https://bugzilla.gnome.org/show_bug.cgi?id=719669
When _GTK_FRAME_EXTENTS changes, we need to redo constraints on
the window - this matters in particular if the toolkit removes
invisible borders when a window is maximized, since otherwise
the maximized window will be positioned as if it still has
invisible borders.
https://bugzilla.gnome.org/show_bug.cgi?id=714707
Instead of hardcoded knowledge of certain classes in MetaWindowGroup,
create a generic interface that all actors can implement to get parts of
their regions culled out during redraw, without needing any special
knowledge of how to handle a specific actor.
The names now are a bit suspect. MetaBackgroundGroup is a simple
MetaCullable that knows how to cull children, and MetaWindowGroup is the
"toplevel" cullable that computes the initial two regions. A future
cleanup here could be to merge MetaWindowGroup / MetaBackgroundGroup so
that we only have a generic MetaSimpleCullable, and move the "toplevel"
cullability to be a MetaCullableToplevel.
https://bugzilla.gnome.org/show_bug.cgi?id=714706
