ActorBox should have methods for easily extracting the X and Y
coordinates of the origin, and the width and height separately.
These methods will make it easier for high-level language bindings
to manipulate ActorBox instances and avoid the Geometry type.
The Vertex and ActorBox boxed types are meant to be used across
the API, but are fairly difficult to bind. Their memory management
is also unclear, and has to go through the indirection of
g_boxed_copy() and g_boxed_free().
We can't short-circuit the emission of ::queue-redraw for not-visible
actors, since ClutterClone uses that signal to know when things need
to be redrawn.
Calling clutter_actor_queue_redraw() out of clutter_actor_real_map() /
clutter_actor_real_unmap() was causing the flag state to get set
incorrectly from _clutter_actor_set_enable_paint_unmapped(), because
a paint queueing a redraw was not expected.
Moving queuing the redraw to clutter_actor_hide()/show() fixes this, and
also fixes a problem where showing a child of a cloned actor wouldn't
cause the clone to be repainted.
http://bugzilla.openedhand.com/show_bug.cgi?id=1484
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Due to the accumulation of floating point errors, natural_width
and min_width can diverge significantly even if the math for
computing them is correct. So just clamp natural_width to
min_width instead of warning about it.
http://bugzilla.openedhand.com/show_bug.cgi?id=1632
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we are cloning an source actor with an unmapped parent, then when
we temporarily map the source actor:
- We need to skip the check that a mapped actor has a mapped
parent.
- We need to realize the actor's parents before mapping it,
or we'll get an assertion failure in clutter_actor_update_map_state()
because an actor with an unmapped parent is !may_be_realized.
http://bugzilla.openedhand.com/show_bug.cgi?id=1633
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Clutter short-circuits painting when an actor's opacity is
zero. However if the actor is being painted from a ClutterClone then
it will be painted using the clone's opacity instead so the test was
broken.
The mapping and unmapping of the X11 stage implementation is
a bit bong. It's asynchronous, for starters, when it really
can avoid it by tracking the state internally.
The ordering of the map/unmap sequence is also broken with
respect to the resizing.
By tracking the state internally into StageX11 we can safely
remove the MapNotify and UnmapNotify X event handling.
In theory, we should use _NET_WM_STATE a lot more, and reuse
the X11 state flags for fullscreening as well.
Sometimes it is useful to be able to track changes in the allocation
flags, like the absolute origin, inside children of a container.
Using the notify::allocation signal is not enough, in these cases, so
we need a specific signal that gives us both the allocation box and the
allocation flags.
Instead of passing a boolean value, the ::allocate virtual function
should use a bitmask and flags. This gives us room for expansion
without breaking API/ABI, and allows to encode more information to
the allocation process instead of just changes of absolute origin.
Units as they have been implemented since Clutter 0.4 have always been
misdefined as "logical distance unit", while they were just pixels with
fractionary bits.
Units should be reworked to be opaque structures to hold a value and
its unit type, that can be then converted into pixels when Clutter needs
to paint or compute size requisitions and perform allocations.
The previous API should be completely removed to avoid collisions, and
a new type:
ClutterUnits
should be added; the ability to install GObject properties using
ClutterUnits should be maintained.
If the application code calls for destruction of an actor we need
to make sure that the actor is unrealized before running the dispose
sequence; otherwise, we might trigger an assertion failure on composite
actors.
All the underlying implementation and the public entry points have
been switched to floats; the only missing bits are the Actor properties
that deal with positioning and sizing.
This usually means a major pain when dealing with GValues and varargs
functions. While GValue will warn you when dealing with the wrong
conversions, varags will simply die an horrible (and hard to debug)
death via segfault. Nothing much to do here, except warn people in the
release notes and hope for the best.
The allocate_available_size() method is a convenience method in
the same spirit as allocate_preferred_size(). While the latter
will allocate the preferred size of an actor regardless of the
available size provided by the actor's parent -- and thus it's
suitable for simple fixed layout managers like ClutterGroup -- the
former will take into account the available size provided by the
parent and never allocate more than that; it is, thus, suitable
for simple fluid layout managers.
If we are short-circuiting the paint when the opacity is zero we still
need to clear the queued_redraw flag otherwise it won't be possible to
queue another redraw of the actor until something else has caused a
paint first.
* master:
[cogl-vertex-buffer] Ensure the clip state before rendering
[test-text-perf] Small fix-ups
Add a test for text performance
[build] Ensure that cogl-debug is disabled by default
[build] The cogl GE macro wasn't passing an int according to the format string
Use the right internal format for GL_ARB_texture_rectangle
[actor_paint] Ensure painting is a NOP for actors with opacity = 0
Make backface culling work with vertex buffers
Since it is convenient to use geometry with an opacity of 0 for input only
purposes it's a worthwhile optimization to avoid submitting anything
for such actors while painting.
The verify_map_state() internal method is conditionally compiled
if we have CLUTTER_ENABLE_DEBUG set; for this reason, all calls to
that method should be made conditional.
When destroying a top-level actor we can actually relax the verification
of the map state, since it might be fully asynchronous and we might not
re-enter inside the mainloop in time to receive the unmap notification.
For consistency, and since those signals are key-related, the
::focus-in signal is not ::key-focus-in and the ::focus-out
signal is now ::key-focus-out.
With the recent change to internal floating point values, ClutterUnit
has become a redundant type, defined to be a float. All integer entry
points are being internally converted to floating point values to be
passed to the GL pipeline with the least amount of conversion.
ClutterUnit is thus exposed as just a "pixel with fractionary bits",
and not -- as users might think -- as generic, resolution and device
independent units. not that it was the case, but a definitive amount
of people was convinced it did provide this "feature", and was flummoxed
about the mere existence of this type.
So, having ClutterUnit exposed in the public API doubles the entry
points and has the following disadvantages:
- we have to maintain twice the amount of entry points in ClutterActor
- we still do an integer-to-float implicit conversion
- we introduce a weird impedance between pixels and "pixels with
fractionary bits"
- language bindings will have to choose what to bind, and resort
to manually overriding the API
+ *except* for language bindings based on GObject-Introspection, as
they cannot do manual overrides, thus will replicate the entire
set of entry points
For these reason, we should coalesces every Actor entry point for
pixels and for ClutterUnit into a single entry point taking a float,
like:
void clutter_actor_set_x (ClutterActor *self,
gfloat x);
void clutter_actor_get_size (ClutterActor *self,
gfloat *width,
gfloat *height);
gfloat clutter_actor_get_height (ClutterActor *self);
etc.
The issues I have identified are:
- we'll have a two cases of compiler warnings:
- printf() format of the return values from %d to %f
- clutter_actor_get_size() taking floats instead of unsigned ints
- we'll have a problem with varargs when passing an integer instead
of a floating point value, except on 64bit platforms where the
size of a float is the same as the size of an int
To be clear: the *intent* of the API should not change -- we still use
pixels everywhere -- but:
- we remove ambiguity in the API with regard to pixels and units
- we remove entry points we get to maintain for the whole 1.0
version of the API
- we make things simpler to bind for both manual language bindings
and automatic (gobject-introspection based) ones
- we have the simplest API possible while still exposing the
capabilities of the underlying GL implementation
The flags field of ClutterActor should have accessor methods for,
language bindings.
Also, the set_flags() and unset_flags() methods should actively
emit notifications for the changed properties.
With the introduction of the map/unmap flags and the split of the
visible state from the mapped state we require that every part of
a scene graph branch is mapped in order to be painted. This breaks
the ability of a ClutterClone to paint an hidden source actor.
In order to fix this we need to introduce an override flag, similar
in spirit to the current modelview and paint opacity overrides that
Clone is already using.
The override flag, when set, will force a temporary map on a
Clone source (and its children).
ClutterContainer provides a foreach_with_internals() vfunc for
iterating over all of a container's children, be them added using
the Container API or be them internal to the container itself.
We should be using the foreach_with_internals() function instead
of the plain foreach().
Bug 1547 - when an actor is unmapped while owning the focus, it should
release it
When an actor is unmapped while owning the focus, the should release it.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1138 - No trackable "mapped" state
* Add a VISIBLE flag tracking application programmer's
expected showing-state for the actor, allowing us to
always ensure we keep what the app wants while tracking
internal implementation state separately.
* Make MAPPED reflect whether the actor will be painted;
add notification on a ClutterActor::mapped property.
Keep MAPPED state updated as the actor is shown,
ancestors are shown, actor is reparented, etc.
* Require a stage and realized parents to realize; this means
at realization time the correct window system and GL resources
are known. But unparented actors can no longer be realized.
* Allow children to be unrealized even if parent is realized.
Otherwise in effect either all actors or no actors are realized,
i.e. it becomes a stage-global flag.
* Allow clutter_actor_realize() to "fail" if not inside a toplevel
* Rework clutter_actor_unrealize() so internally we have
a flavor that does not mess with visibility flag
* Add _clutter_actor_rerealize() to encapsulate a somewhat
tricky operation we were doing in a couple of places
* Do not realize/unrealize children in ClutterGroup,
ClutterActor already does it
* Do not realize impl by hand in clutter_stage_show(),
since showing impl already does that
* Do not unrealize in various dispose() methods, since
ClutterActor dispose implementation already does it
and chaining up is mandatory
* ClutterTexture uses COGL while unrealizable (before it's
added to a stage). Previously this breakage was affecting
ClutterActor because we had to allow realize outside
a stage. Move the breakage to ClutterTexture, by making
ClutterTexture just use COGL while not realized.
* Unrealize before we set parent to NULL in clutter_actor_unparent().
This means unrealize() implementations can get to the stage.
Because actors need the stage in order to detach from stage.
* Update clutter-actor-invariants.txt to reflect latest changes
* Remove explicit hide/unrealize from ClutterActor::dispose since
unparent already forces those
Instead just assert that unparent() occurred and did the right thing.
* Check whether parent implements unrealize before chaining up
Needed because ClutterGroup no longer has to implement unrealize.
* Perform unrealize in the default handler for the signal.
This allows non-containers that have children to work properly,
and allows containers to override how it's done.
* Add map/unmap virtual methods and set MAPPED flag on self and
children in there. This allows subclasses to hook map/unmap.
These are not signals, because notify::mapped is better for
anything it's legitimate for a non-subclass to do.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If we need to check that the layout sequence is correct in
terms of order of execution and with respect to caching, then
having a CLUTTER_DEBUG_LAYOUT debug flag would make things
easier.
Clutter was complaining about netural width smaller than minimum widths
(differences around 0.0005) by using an epsilon value of 1e-4 for these
floating point comparisons, these warnings have now been silenced.
Bug 1454 - move queue_redraw virtualization to ClutterActor
The ClutterActor::queue-redraw signal allows parent containers to
track whether their children need a redraw.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
A common use of setting clip is to keep an actor inside its allocation;
right now to do this you have to set up a callback on notify::allocation.
There's no overhead added by sticking another bit in ClutterActor
clip-to-allocation that will clip painting to the allocation if set.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1499 - clutter_actor_notify_if_geometry_changed causes sync
layout cycles
Whenever clutter_actor_set_{width,height,x,y,size...} is used, extra
synchronous size requests are triggered in
clutter_actor_notify_if_geometry_changed.
If the get_preferred_width() and get_preferred_height() implementations
are particularly costly (e.g. ClutterText) this will result in a performance
impact.
To avoid excessive allocation or requisition cycles we use the
cached values and flags. If we don't have an allocation, we assume
that we need to notify all the properties; if we don't have a size
requisition we notify only width and height; finally, if we do have
a valid allocation we notify only on the changed values.
Add missing (out) annotations to the doc comments for ClutterActor methods
with multiple return values.
Fix the definition of clutter_actor_get_allocation_vertices() to be
consistent with the declaration and have verts[4] rather than verts[].x
http://bugzilla.openedhand.com/show_bug.cgi?id=1481
The ClutterFixed type and symbols are now equivalent to the native
float type. In order to remove ambiguity and clean up the code, any
usage of ClutterFixed and relative macros has been removed.
Since the CoglMatrix type was added for supporting texture matrices recently
it made sense to be consistent accross the Cogl API and use the Cogl type
over the GL style GLfloat m[16] arrays.
Add annotations such as (transfer-none) (out) (element-type ClutterActor),
and so forth to the doc comments as appropriate.
The annotations added here are a combination of the annotations previously
in gir-repository for Clutter and annotations found in a review of all
return values with that were being parsed with a transfer of "full".
http://bugzilla.openedhand.com/show_bug.cgi?id=1452
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Bug 1167 - clutter_effect_rotate improperly clamps negative angles
The rotation angle properties had a minimum value of 0.0 but the
rotation works fine with a negative value so the limitation is
unnecessary. This makes rotation using the ClutterAnimation API more
flexible because it was previously not possible to rotate
counter-clockwise from the 0.0 position.
When rendering a clone before this commit the clone's opacity was
combined with the opacity of the source but this is not usually the
desired effect. Instead the clone's opacity (combined with its
parents) should completely override the opacity of the source.
The current code that handles the invariant that the new parent
of an actor needing a layout should also be queued for relayout
is hitting the short-circuiting we do in the queue_relayout()
method.
In order to fix this we can forcibly set the actor to need a
width/height request and an allocation; then we queue a relayout
on the parent.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Final bit of integration between ClutterActor and Pango: a simple
method for creating a PangoLayout, pre-filled with text and ready
to be rendered using cogl_pango_render_layout().
This should make writing new Actors rendering custom text in their
paint() implementation easy and reliable.
Bug 1349 - Using the anchor point to set the scale center is messy
The branch adds an extra center point for scaling which can be used
for example to set a scale about the center without affecting the
position of the actor.
The scale center can be specified as a unit offset from the origin or
as a gravity. If specified as a gravity it will be stored as a
fraction of the actor's size so that the position will track when the
actor changes size.
The anchor point and rotation centers have been modified so they can
be set with a gravity in the same way. However, only the Z rotation
exposes a property to set using a gravity because the other two
require a Z coordinate which doesn't make sense to interpret as a
fraction of the actor's width or height.
Conflicts:
clutter/clutter-actor.c
* generic-actor-clone:
Remove CloneTexture from the API
[tests] Clean up the Clone interactive test
Rename ActorClone to Clone/2
Rename ActorClone to Clone/1
Improves the unit test to verify more awkward scaling and some corresponding fixes
Implements a generic ClutterActorClone that doesn't need fbos.
There is some GL work and a repaint anytime the clip is set
or unset, so avoid that if it isn't really changed.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The documentation has been updated to reflect the fact that the anchor
point will move when the actor changes size if it was specified using
a gravity value. The new functions for setting the scale center and z
rotation gravity are also documented.
Currently only the Z axis rotation center can be set using a gravity
but the other rotations also store their center as an AnchorCoord for
consistency. Specifying the center as a gravity makes less sense for
the other axes because the actors have no size along the Z axis.
The rotation angles are now stored as gdoubles and the fixed point *x
entry points have been removed.
The Z rotation can now be set with a gravity center using the
following new function:
void clutter_actor_set_z_rotation_from_gravity (ClutterActor *self,
gdouble angle,
ClutterGravity gravity);
This sets the center point from which the scaling will occur. This can
be used insetad of the anchor point to avoid moving the actor. Like
the anchor point, it can be specified as either a coordinate in units
or a gravity enum.
To set the center you can use two new variants of set_scale:
clutter_actor_set_scale_full (ClutterActor *self,
gdouble scale_x,
gdouble scale_y,
int center_x,
int center_y);
or
clutter_actor_set_scale_with_gravity (ClutterActor *self,
gdouble scale_x,
gdouble scale_y,
ClutterGravity gravity);
The ClutterFixed variants of the set_scale functions have been removed
and the scale value is now always stored as a double.
This makes it so when the anchor point is set using a gravity enum
then the anchor point moves when the actor changes size. A new
property is added for the anchor point gravity. If the anchor point is
set from gravity then the position in units can also be retreived with
the regular API.
A new union type is used to store the anchor point with helper
accessor functions. The hope is these can be reused for the scale and
rotation center points.
Since we allow overriding the paint() implementation through the
::paint signal to change the way an actor is being painted, we
should also allow overriding the pick() implementation using a
::pick signal.
Since a pick is really a paint operation, we can safely get
the allocation box, instead of using get_width() and get_height().
This should help cutting down the function calls. If we were
feeling adventurous, we could even use the allocation directly
from the private data structure.
Based on a patch by Gwenole Beauchesne <gbeauchesne@splitted-desktop.org>
If an actor is not set as visible, or if it is in a section of
the scenegraph that it's set as not visible (e.g. one of the
parents is not visible) then we should not queue a redraw for
it.
Patch based on code from Michael Boccara <michael@graphtech.co.il>
The stage-with/height-percentage converters had been broken by
the multiple-stages support of Clutter 0.8. They are also made
useless by the fact that Units are now floating point values.
The millimeters and typographic points converters also depended
on the default stage, but they can be reworked to use the default
DPI coming from the default Backend instead.
To deal with all the corner cases that couldn't be scripted a number of patches
were written for the remaining 10% of the effort.
Note: again no API changes were made in Clutter, only in Cogl.
This is the result of running a number of sed and perl scripts over the code to
do 90% of the work in converting from 16.16 fixed to single precision floating
point.
Note: A pristine cogl-fixed.c has been maintained as a standalone utility API
so that applications may still take advantage of fixed point if they
desire for certain optimisations where lower precision may be acceptable.
Note: no API changes were made in Clutter, only in Cogl.
Overview of changes:
- Within clutter/* all usage of the COGL_FIXED_ macros have been changed to use
the CLUTTER_FIXED_ macros.
- Within cogl/* all usage of the COGL_FIXED_ macros have been completly stripped
and expanded into code that works with single precision floats instead.
- Uses of cogl_fixed_* have been replaced with single precision math.h
alternatives.
- Uses of COGL_ANGLE_* and cogl_angle_* have been replaced so we use a float for
angles and math.h replacements.
Many use cases for clonning an actor don't require running a shader on the
resulting clone image and so requiring FBOs in these cases is overkill and
in-efficient as it requires kicking and synchronizing a render for each clone.
This approach basically just uses the paint function of another actor to
implement the painting for the clone actor with some fiddling of the model-
view matrix to scale according to the different allocation box sizes of
each of the actors.
A simple unit test called test-actors2 was added for testing.
ClutterUnits should not be used interchangeably as, or with
ClutterFixed values. ClutterUnits should also not be assumed
to be integers.
This commit fixes the last few improper usages of ClutterUnit
values, and adds a CLUTTER_UNITS_FORMAT macro for safely printing
ClutterUnit values with printf().
Merge branch 'text-actor'
* text-actor: (108 commits)
Re-align ClutterText header file
[text] Fix cursor sizing
Comments and whitespace fixes to ClutterText
[docs] Add newly added :single-line-mode accessors
Update the ignore file
[tests] Add text field interactive test
[text] Add single-line-mode to ClutterText
[text] Fix the deletion actions
[text] Use cached length when possible
[tests] Add unit for the ClutterText:password-char property
[docs] Update the Text section
[text] Coalesce text visibility and password character
Allow localizations to change the text direction
Clean up the update_pango_context() function
Pass the PangoContext, not the MainContext
Revert the logic of the PangoContext check
Remove the binding pool entry from the list
Remove BindingPool::list_actions()
Add ClutterActor::create_pango_context()
Rename the PangoContext creation functions
...
Sometimes an actor needs to set specific font rendering options on
the PangoContext without changing settings for every other text-rendering
actor.
In order to do this, we need a new public method to create a Pango
context object -- preset with all the default settings -- owned by the
developer and not shared with the rest of Clutter.
This new method is called clutter_actor_create_pango_context(); while
it does not strictly depend on a ClutterActor, it is a good idea to
have it inside the ClutterActor API to map the current get_pango_context()
method and in case we start storing screen-specific data to the Actor
itself during the 1.x API cycle.
Bug 1392 - behaviour_set_alpha set same alpha twice lead to warning
and destroy the input alpha
The following functions are fixed:
clutter_actor_set_shader
clutter_alpha_set_timeline
clutter_behaviour_set_alpha
clutter_clone_texture_set_parent_texture
They either now reference the new value before destroying the old
value, or just return immediately if the values are the same.
* units-rework:
[texture] Do not mix fixed point and units values
[tests] Fix the actor detection
[units] Do not use fixed point and units interchangeably
The PangoContext should be stored once, and inside the main
Clutter context. Each actor for which clutter_actor_get_pango_context()
has been called will hold a reference on the Pango context as well.
This makes it possible to update the text rendering for Clutter
by using only public API.
Rendering text inside an actor is pretty much impossible without
using internal API to create the various pieces like the PangoContext
and the font map.
Each actor should have the ability to create a PangoContext, which
is the only object needed to generate layouts and change the various
Pango settings.
This commit adds a clutter_actor_get_pango_context() function that
creates a PangoContext inside the ClutterActor private data and allows
the creation of PangoLayouts when needed. If the actor already
has a PangoContext, the same instance is returned.
The PangoContext is created only on demand.
* cairo-texture:
[cairo-texture] Remove the construct only restriction on surface size
[cairo-texture] Silently discard 0x0 surfaces
Re-indent ClutterPath header
Add a test case for the new cairo path functions
Add clutter_path_to_cairo_path and clutter_path_add_cairo_path
Warn instead of returning in the IN_PAINT check
Small documentation fixes
Print a warning when creating a cairo_t while painting
Do not set the IN_PAINT flag inside the Stage paint
Set the IN_PAINT private flag
[docs] Add ClutterCairoTexture to the API reference
Add ClutterCairoTexture
Require Cairo as a Clutter dependency
Conflicts:
Fix merge conflict in clutter/clutter-path.h
Clutter units are, at the moment, implemented as a value in fixed point
notation using the same format as CoglFixed. This is, though, an
implementation detail. For this reason, units should not be treated as
CoglFixed values and should be converted to and from fixed point using
the provided macros.
This commit updates the usage of units and fixed point values in
ClutterActor and rationalises some of the transformation code that
heavily relied on the equivalency between them.
When calling clutter_actor_paint() we should be setting the
CLUTTER_ACTOR_IN_PAINT private flag. This allows signalling
to each Actor subclass that we are effectively in the middle
of a paint sequence. Actor subclasses can check for this
private flag and act based on its presence - for instance to
avoid recursion, or to detect performance degradation cases.
Bug 1003 - Add clutter_actor_take_key_focus()
The grab_key_focus() method is just a simple wrapper around
clutter_stage_take_key_focus() that removes the need to get
the ClutterStage of an actor in order to set the key focus.
Based on a patch by Xan López.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Signed-off-by: Øyvind Kolås <pippin@linux.intel.com>
When the apply_transform_to_point() and its relative variant
landed in Clutter 0.3, the initial approach was to modify the
passed vertex as an in-out parameter. This was later dropped
in favour of a more consistent out parameter.
Unfortunately, the implementation never changed: both methods
where modifying the passed vertex with the partial results of
the computations.
This commit copies the contents of the "point" ClutterVertex
argument inside a stack variable and, for good measure, constifies
the argument.
Thanks to Thomas Steinacher for catching this in Python.
* clutter/clutter-actor.c:
(clutter_actor_set_property): Add sanity checks for NULL
boxed values when setting the rotation center.
* tests/interactive/test-animation.c:
(on_button_press): Add an example on how to use the rotation
properties to animate an actor.
Bug 1049 - Clutter doesn't support most GLSL uniforms (patch
by Chris Lord and Neil Roberts)
* README: Update release notes.
* clutter/Makefile.am:
* clutter/clutter-shader-types.[ch]: Add GValue types for
shader values.
* clutter/clutter-actor.[ch]: Update the shader API to use
the newly added GValue support for GLSL shader uniform
setters.
* clutter/clutter-shader.[ch]: Add float and integer convenience
API for single value GLSL uniform setters.
* clutter/cogl/cogl-shader.h: Add new uniform setters.
* clutter/cogl/gl/cogl-context.c:
* clutter/cogl/gl/cogl-context.h:
* clutter/cogl/gl/cogl-defines.h.in:
* clutter/cogl/gl/cogl-program.c:
* clutter/cogl/gl/cogl.c: Update the GL implementation of COGL
to handle the GLSL uniform setters.
* clutter/cogl/gles/cogl-gles2-wrapper.c:
* clutter/cogl/gles/cogl-gles2-wrapper.h:
* clutter/cogl/gles/cogl-internal.h:
* clutter/cogl/gles/cogl-program.c: Update the GLES 2.0 implementation
of COGL to handle the GLSL uniform setters.
* doc/reference/clutter/clutter-sections.txt:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-fbo.c:
* tests/interactive/test-shader.c: Update the shader tests.
(clutter_actor_get_paint_visibility): Be sure to return exactly
TRUE or FALSE instead of zero or some non-zero value in these
functions that return a gboolean. Thanks to Kai Wei for spotting.
* clutter/cogl/cogl-color.h:
* clutter/cogl/cogl-path.h:
* clutter/cogl/cogl-types.h:
* clutter/cogl/common/cogl-color.c: Deprecated cogl_color()
in favour of cogl_set_source_color() and friends; store the
CoglColor components as unsigned bytes instead of fixed point
normalized values; add functions for allocating, copying and
freeing CoglColor, for use of language bindings.
* clutter/cogl/cogl.h.in:
* clutter/cogl/cogl-deprecated.h: Added cogl-deprecated.h,
an header file containing the deprecation symbols similar
to clutter-deprecated.h.
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl-texture.c:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Update the GL and GLES implementations
of COGL after the CoglColor changes.
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-entry.c:
* clutter/clutter-label.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-texture.c: Do not use CoglColor whenever it
is possible, and use cogl_set_source_color4ub() instead.
* clutter/pango/cogl-pango-render.c: Ditto as above.
* doc/reference/clutter/subclassing-ClutterActor.xml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/interactive/test-cogl-offscreen.c:
* tests/interactive/test-cogl-primitives.c:
* tests/interactive/test-cogl-tex-convert.c:
* tests/interactive/test-cogl-tex-foreign.c:
* tests/interactive/test-cogl-tex-getset.c:
* tests/interactive/test-cogl-tex-polygon.c:
* tests/interactive/test-cogl-tex-tile.c:
* tests/interactive/test-paint-wrapper.c: Drop the usage of
CoglColor whenever it is possible.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-clone-texture.c:
* clutter/clutter-private.h:
* clutter/clutter-texture.c:
* clutter/x11/clutter-x11-texture-pixmap.c:
Attempt to lower overhead of updating TFP's (particularly mipmaped).
Compresses mipmap updates only for visible TFPs.
Avoiding updates for non visible TFP's whilst keeping visible
clones working ok.
Bug 1210 - Add CoglColor API
* clutter/cogl/cogl-color.h:
* clutter/cogl/cogl.h.in:
* clutter/cogl/common/Makefile.am:
* clutter/cogl/common/cogl-color.c:
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Add a new color-type, to be used by
COGL. CoglColor is optimized to allow the minimum amount of
conversions possible for both GL and GLES implementations.
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-entry.c:
* clutter/clutter-main.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c: Use CoglColor when needed.
* clutter/pango/pangoclutter-render.c: Use CoglColor when needed.
* doc/reference/cogl/cogl-docs.sgml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/test-cogl-offscreen.c:
* tests/test-cogl-primitives.c:
* tests/test-cogl-tex-convert.c:
* tests/test-cogl-tex-foreign.c:
* tests/test-cogl-tex-getset.c:
* tests/test-cogl-tex-polygon.c:
* tests/test-cogl-tex-tile.c:
* tests/test-paint-wrapper.c: Update the tests.
* README: Update release notes.
Bug 1209 - Move fixed point API in COGL
* clutter/cogl/cogl-fixed.h:
* clutter/cogl/cogl.h.in:
* clutter/cogl/common/Makefile.am:
* clutter/cogl/common/cogl-fixed.c: Add fixed point API, modelled
after the ClutterFixed. The CoglFixed API supercedes the ClutterFixed
one and avoids the dependency of COGL on Clutter's own API.
* clutter/cogl/common/cogl-clip-stack.c:
* clutter/cogl/common/cogl-primitives.c:
* clutter/cogl/common/cogl-primitives.h: Update internal usage of
ClutterFixed to CoglFixed.
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl-primitives.c:
* clutter/cogl/gl/cogl-texture.c:
* clutter/cogl/gl/cogl.c: Ditto, in the GL implementation of the
COGL API.
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-fbo.c:
* clutter/cogl/gles/cogl-gles2-wrapper.c:
* clutter/cogl/gles/cogl-primitives.c:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Ditto, in the GLES implementation of
the COGL API.
* clutter/pango/pangoclutter-glyph-cache.c:
* clutter/pango/pangoclutter-glyph-cache.h: Ditto, in the Pango
renderer glyphs cache.
* clutter/clutter-fixed.c:
* clutter/clutter-fixed.h: ClutterFixed and related API becomes
a simple transition API for bindings and public Clutter API.
* clutter/clutter-actor.c:
* clutter/clutter-alpha.c:
* clutter/clutter-backend.c:
* clutter/clutter-behaviour-depth.c:
* clutter/clutter-behaviour-ellipse.c:
* clutter/clutter-behaviour-path.c:
* clutter/clutter-behaviour-rotate.c:
* clutter/clutter-behaviour-scale.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-color.c:
* clutter/clutter-entry.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c:
* clutter/clutter-timeline.c:
* clutter/clutter-units.h: Move from the internal usage of
ClutterFixed to CoglFixed.
* doc/reference/clutter/clutter-sections.txt:
* doc/reference/cogl/cogl-docs.sgml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/test-cogl-tex-tile.c:
* tests/test-project.c: Fix tests after the API change
* README: Add release notes.
Bug 1124 - Clutter causes an additional size request in each
allocation
* clutter/clutter-actor.c:
(clutter_actor_store_old_geometry): Store the allocation instead
of causing a new size-request cycle. (Johan Bilien)
* clutter/clutter-actor.c
(clutter_actor_set_anchor_point_from_gravity)
(clutter_actor_move_anchor_point_from_gravity): Add documentation
to make it clear that the anchor point won't move when the actor
is resized.
* clutter/clutter-actor.c (clutter_actor_set_property): When
changing the anchor point properties, use set_anchor_pointu
instead of changing the value directly so that a redraw will be
queued.
(clutter_actor_set_anchor_pointu): Queue a redraw when the anchor
point is changed. Thanks to Johan Bilien.
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/cogl.c:
* clutter/cogl/cogl.h.in: Add cogl_clip_stack_save,
cogl_clip_stack_restore, cogl_viewport and cogl_frustum.
* clutter/cogl/gl/cogl-fbo.h:
* clutter/cogl/gl/cogl-fbo.c: Try to attach a stencil buffer when
creating an FBO.
* clutter/cogl/common/cogl-clip-stack.c: Add functions to save and
restore the whole state of the stack.
* clutter/clutter-texture.c (clutter_texture_paint): When
rendering the FBO source, setup a temporary asymmetric perspective
projection matrix to render it as it would appear on screen.
* clutter/clutter-private.h:
* clutter/clutter-actor.c
(_clutter_actor_apply_modelview_transform_recursive): No longer
static and exported in clutter-private.h
(clutter_actor_get_abs_allocation_vertices): The initialization of
the local stage pointer got moved away in revision 3081 so it was
crashing if the function is called before the layout is run.
Bug 1010 - ClutterLabel does not update the layout (Lee Jusung)
* clutter/clutter-actor.c:
(clutter_actor_queue_relayout): Remove some pointer dereferencing.
* clutter/clutter-label.c:
(clutter_label_allocate): Revert the change of r2883 and remove the
layout width cache and force a recreation of the layout every time
we receive an allocation.
This is now do-what-I-mean like clutter_actor_get_size so that if
the allocation box is available it will use that, otherwise it
will use the preferred size. clutter_actor_transform_vertices has
been converted to clutter_actor_transform_and_project_box so that
it can be used by both functions. Based on a patch by Emmanuele
Bassi.
(clutter_actor_get_abs_allocation_vertices)
(clutter_actor_get_allocation_vertices): These two functions now
force a relayout if the allocation box is not available.
* tests/test-fbo.c: Fixed the shader to use texture2D instead of
texture2DRect now that GL_EXT_texture_rectangle is no longer used.
* clutter/clutter-actor.c:
(clutter_actor_set_min_width),
(clutter_actor_set_min_height),
(clutter_actor_set_natural_width),
(clutter_actor_set_natural_height): Ignore any override of the
minimum and natural size of the stage on backends that only
support static stages.
* clutter/clutter-stage.c (clutter_stage_allocate): Use the
preferred size of the ClutterStage implementation instead of
the display size.
* clutter/clutter-backend.[ch]: Remove get_display_size() and
clutter_backend_get_display_size().
* clutter/eglnative/clutter-backend-egl.c:
* clutter/fruity/clutter-backend-fruity.c:
* clutter/osx/clutter-backend-osx.c:
* clutter/sdl/clutter-backend-sdl.c:
* clutter/win32/clutter-backend-win32.c:
* clutter/x11/clutter-backend-x11.c: Remove get_display_size()
implementations.
* clutter/clutter-actor.c:
(clutter_actor_set_min_width),
(clutter_actor_set_min_height),
(clutter_actor_set_natural_width),
(clutter_actor_set_natural_height): Add a comment explaining
the override in place for backends providing a fixed size
on a stage.
* clutter/clutter-actor.c:
(clutter_actor_set_min_width),
(clutter_actor_set_min_height),
(clutter_actor_set_natural_width),
(clutter_actor_set_natural_height): If setting the minimum
and natural width and height on a top-level actor, and on
a backend that provides only static stages, then override
the value and use the size of the display as returned by
the backend.
* clutter/eglnative/clutter-stage-egl.c:
(clutter_stage_egl_realize): Remove the setting of the
minimum and natural width and height.
actor clip being enabled or disabled in an actor paint
method. Otherwise the clip stack can be become unbalanced. This
was happening in ClutterEntry until it was fixed in revision 2983.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_allocate_preferred_size): Add more documentation
and notes on where it's appropriate to call this function.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
Clean up of parenting code (see #972)
Doc updates to section intro.
Add clutter_actor_allocate_preferred_size () utility call
* clutter/clutter-group.c: (clutter_fixed_layout_allocate):
Use clutter_actor_allocate_preferred_size ()
* doc/clutter-actor-invariants.txt:
Add some more notes
* clutter/clutter-actor.c:
(clutter_actor_set_parent): Do not emit ::parent-set when
reparenting.
(clutter_actor_unparent): Ditto, as above.
(clutter_actor_reparent): Emit ::parent-set with the old
parent and set the IN_REPARENT flag unconditionally.
* clutter/clutter-actor.c:
(clutter_actor_set_parent): Document and maintain the invariant
that after setting a realized parent on an actor, the actor is
also going to be realized.
(clutter_actor_unparent): Change the invariant that an unparented
actor is also unrealized: the paint is fast enough to avoid
unrealizing, since it also causes more problems that what it's
worth.
* tests/test-invariants.c (test_show_on_set_parent): Update the
invariants test because we changed the invariants.
* clutter/clutter-actor.c (clutter_actor_unparent): Reset the
:show-on-set-parent property to TRUE when unparenting.
* tests/Makefile.am: Add test-invariant to the build.
* tests/test-invariants.c: Test the invariants that we are going
to honour (and document, at some point).
* clutter/clutter-actor.c:
(clutter_actor_move_anchor_point):
(clutter_actor_move_anchor_pointu):
(clutter_actor_move_anchor_point_from_gravity):
Fixed incorrect sign of position adjustment.
Fixed replace call to _move_by with move_byu in
_move_anchor_pointu.
Stripped trailing whitespace.
Bug #953 - Actors are not hidden before unrealized or
disposed (Tommi Komulainen)
* clutter/clutter-actor.c:
(clutter_actor_unrealize): Hide a visible actor when unrealizing
it.
(clutter_actor_dispose): Make sure to unrealize an actor when
disposing it.
* clutter/clutter-actor.c:
(clutter_actor_dispose), (clutter_actor_destroy),
(clutter_actor_unparent): Clean up the actor's destruction
sequence, making sure that every operation is performed
under the CLUTTER_ACTOR_IN_DESTRUCTION internal flag.
Bug #964 - "unrealized" signal of ClutterActor wrongly named
* clutter/clutter-actor.c (clutter_actor_class_init): Fix typo
in the ::unrealize signal name. (Armin Burgmeier)
* clutter/clutter-actor.c: Add more clarifications on the
size and position accessors and the distinction between
transformed and untransformed actor box inside the actor's
description.
Bug #815 - Split up request, allocation, and paint box
* clutter/clutter-actor.[ch]: Rework the size allocation,
request and paint area. Now ::request_coords() is called
::allocate(), and ::query_coords() has been split into
::get_preferred_width() and ::get_preferred_height(). See
the documentation and the layout test on how to implement
a container and layout manager with the new API. (#915,
based on a patch by Havoc Pennington, Lucas Rocha and Johan
Bilien)
* clutter/clutter-clone-texture.c: Port CloneTexture to
the new size negotiation API; it just means forwarding
the requests to the parent texture.
* clutter/clutter-deprecated.h: Add deprecated and replaced
API.
* clutter/clutter-entry.c: Port Entry to the new size
negotiation API.
* clutter/clutter-group.c: Port Group to the new size
negotiation API; the semantics of the Group actor do not
change.
* clutter/clutter-label.c: Port Label to the new size
negotiation API, and vastly simplify the code.
* clutter/clutter-main.[ch]: Add API for executing a
relayout when needed.
* clutter/clutter-private.h: Add new Stage private API.
* clutter/clutter-rectangle.c: Update the get_abs_opacity()
call to get_paint_opacity().
* clutter/clutter-stage.c:
(clutter_stage_get_preferred_width),
(clutter_stage_get_preferred_height),
(clutter_stage_allocate),
(clutter_stage_class_init): Port Stage to the new size
negotiation API.
* clutter/clutter-texture.c: Port Texture to the new size
negotiation API.
* clutter/clutter-types.h: Add ClutterRequestMode enumeration.
* clutter/x11/clutter-stage-x11.c: Port the X11 stage
implementation to the new size negotiation API.
* tests/Makefile.am: Add the layout manager test case.
* tests/test-opacity.c: Update.
* tests/test-project.c: Update.
* tests/test-layout.c: Test case for a layout manager implemented
using the new size negotiation API; the layout manager handles
both transformed and untransformed children.
Bug #840 - Implement prepare-paint and finish-paint signals.
* clutter/clutter-actor.c:
(clutter_actor_class_init): Add the ::paint, ::realize and
::unrealize signals to ClutterActor. It is possible to
override the paint, realization and unrealization of an
actor without subclassing it. The ::paint signal handlers
have the same limitations of a ClutterActor::paint implementation
inside a subclass.
(clutter_actor_realize),
(clutter_actor_unrealize),
(clutter_actor_paint): Emit the signals instead of calling
the functions from the class vtable.
* clutter/clutter-stage.c (clutter_stage_get_default): Don't grab
the floating reference when creating the default stage. The stage
manager will take a reference to it so it will behave as any other
stage.
(clutter_stage_new): Don't take the floating reference to the new
stage but let the stage manager keep it instead.
* clutter/clutter-stage-manager.c
(_clutter_stage_manager_add_stage): Take a reference to the stage
when it is added to the list.
(_clutter_stage_manager_remove_stage): Unref the stage when it is
removed from the list.
(clutter_stage_manager_dispose): Keep track of the 'next' pointer
as a separate variable so we can cope when the stage being
destroyed removes itself from the list as the list is being
iterated.
* clutter/clutter-actor.c (clutter_actor_destroy): Take a
reference at the beginning of the function even if there is no
parent container so that overall the reference count is not
changed when the actor is unref'd again at the bottom of the
function. Previously it would have a net effect of leaving the
reference count alone unless it is a top level actor in which case
it would unref it.
Bug #928 - Reparenting a child that itself is a container
doesn't work
* clutter/clutter-actor.c (clutter_actor_set_parent): Realize
an actor when setting its parent, if the parent is realized.
* clutter/clutter-group.c:
(clutter_group_realize), (clutter_group_class_init): Add the
missing implementation of the ::realize() virtual function; this
makes sure that the children of a Group are realized if the Group
is realized. (#928)
* clutter/clutter-actor.c:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
Rejid Øyvind's previous commit a little moving more into
clutter-main.c and using ClutterContext.
Also Refactor clutter_init & clutter_init_with_args to share
same core init code.
framebuffer are only approximately the correct value.
* clutter/clutter-actor.c:
(init_bits): initialize constants about how many bits are
available/will be used for r,g,b components.
(_clutter_pix_to_id): now own function, compute an id from a
pixel into its own function (used from _clutter_do_pick).
(_clutter_id_to_col): now own function, computes the color to use for
a given id.
(clutter_actor_paint): use clutter_id_to_col.
* clutter/clutter-main.c:
(_clutter_do_pick): use _clutter_pix_to_id
(clutter_main): re-enable invocation of fruity app shell.
Bug #900 - clutter_actor_lower() and friends do not queue redraw
* clutter/clutter-actor.c:
(clutter_actor_raise),
(clutter_actor_lower): Queue a redraw after raising and lowering
and actor in the paint order stack. (#900)
actor position was being moved in the wrong direction. Perhaps
this was a cut-and-paste bug from move_anchor_point_from_gravity
because in that function ax and ay represent the old anchor
position, but in this function they represent the new.
primitives and path API a bit smaller and more resembling cairo.
* clutter/cogl/gl/cogl-primitives.c:
* clutter/cogl/gles/cogl-primitives.c:
* clutter/cogl/gles/cogl.c:
* clutter/clutter-actor.c:
* clutter/clutter-rectangle.c:
* tests/test-cogl-offscreen.c:
* tests/test-cogl-primitives.c:
* tests/test-cogl-tex-convert.c:
* tests/test-cogl-tex-foreign.c:
* tests/test-cogl-tex-getset.c:
* tests/test-cogl-tex-tile.c: updated according to changes in cogl.
* clutter/clutter-actor.c:
(parse_rotation_array),
(clutter_actor_set_custom_property): Use the internal, unit based
rotation setter when parsing the rotation from a ClutterScript
file.
(clutter_geometry_copy),
(clutter_vertex_copy),
(clutter_actor_box_copy): Use the more efficient g_slice_dup().
(clutter_actor_get_stage): Add documentation.
* clutter/clutter-group.c: Documentation fix.
* clutter/clutter-actor.c: Document :show-on-set-parent and
the fact that calling clutter_actor_show() and hide() on an
unparented actor will change that property as well as a side
effect.
Bug 892 - Incorrect results using rotation-[center|angle] properties
* clutter/clutter-actor.c:
(clutter_actor_set_rotation_internal): Inline function for setting
the rotation using fixed point for the angle and units for the
center of rotation.
(clutter_actor_set_property),
(clutter_actor_set_rotationx): Use the internal setter to avoid
loss of precision and too many conversions to and from units.
Bug #864 - Allow instantiating and subclassing of ClutterStage
* clutter/Makefile.am: Add clutter-stage-window.[ch]
* clutter/clutter-stage-manager.c:
(_clutter_stage_manager_remove_stage): Do not warn if removing
a stage we don't manage, as we might be invoked multiple times
during a ClutterState dispose sequence.
* clutter/clutter-actor.c:
* clutter/clutter-backend.[ch]:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/clutter-stage.[ch]: Make ClutterStage a proxy actor,
with a private actor implementing the ClutterStageWindow
interface for handling the per-backend realization, painting
and unrealization, plus all the windowing system abstraction.
* clutter/x11/clutter-event-x11.c:
* clutter/x11/clutter-stage-x11.[ch]: Port the X11 backend
to the new backend and stage API and semantics.
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-stage-glx.c: Port the GLX backend to
the new backend and stage API and semantics.
* clutter/eglx/clutter-backend-egl.[ch]:
* clutter/eglx/clutter-stage-egl.[ch]: Port the EGLX backend
to the new backend and stage API and semantics (untested).
* tests/test-multistage.c (on_button_press): Rename
clutter_stage_create_new() to clutter_stage_new().
* clutter/clutter-actor.c:
Remove uneeded stage private member.
Add show-on-set-parent prop and make so by default Actors are
now automatically shown when reparented (#791)
* clutter/eglx/clutter-backend-egl.c:
* clutter/cogl/gles/cogl.c:
A couple of minor comments.
* clutter/eglnative/Makefile.am:
Add missing clutter-egl.h header (back port from trunk)
* tests/test-actors.c:
Modify to take advantage of new show-on-set-parent functionality.
contained data structure.
* clutter/clutter-id-pool.[ch]: new files.
* clutter/Makefile.am: added clutter-id-pool.[ch]
* clutter/clutter-private.h: use a ClutterIDPool instead of GArray and
GSList to keep track of the reusable ids.
* clutter/clutter-actor.c: moved id pool logic away.
* clutter/clutter-main.c: simplified id pool creation/finalization.
Add support for the anchor point inside ClutterScript (#834,
David Stanczak)
* clutter/clutter-actor.c:
(clutter_actor_set_property),
(clutter_actor_get_property),
(clutter_actor_class_init): Add the :anchor-x and :anchor-y
properties to the ClutterActor class.
(clutter_actor_set_anchor_point),
(clutter_actor_set_anchor_pointu),
(clutter_actor_set_anchor_point_from_gravity): Reimplement
the pixel based and gravity based API using the units based
one. Emit the ::notify signal for the :anchor-x and :anchor-y
properties.
(parse_units),
(clutter_actor_parse_custom_node): Parse the :anchor-x and
:anchor-y properties using the custom units format (mm, px,
pt and %).
* tests/test-script.json: Test the newly added properties.
of overflowing the id numbers when continusly creating and destroying
actors on long running applications for 16bpp.
* clutter/clutter-private.h: replaced hashtable with GArray and a
GSList for available slots in the array.
* clutter/clutter-actor.c: (create_actor_id): function to create an
actor->id mapping, (release_actor_id): function to mark an existing id
as available for reuse.
* clutter/clutter-main.c: (clutter_context_free): added utility
function for cleaning up the context,
(clutter_get_actor_by_gid): use the GArray for looking up actors.
* clutter/clutter-actor.c: Remove the usage of g_return_if_fail()
from static functions: either assert or use g_warning() to check
internal state, as g_return_if_fail() can be compiled out.
* clutter/clutter-main.c: Ditto as above.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_get_abs_opacity): Add function that does what
get_opacity() does now...
(clutter_actor_get_opacity): ... and make get_opacity() do what
it's supposed to be doing. The original get_opacity() returned
a composited value, and there's no way to actually extract the
real opacity value set with set_opacity().
* clutter/clutter-clone-texture.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-texture.c: Update to use get_abs_opacity().
* clutter/clutter-entry.c:
* clutter/clutter-label.c: Ditto. Also, never change the stored
alpha value. (#804)
* tests/Makefile.am:
* tests/test-opacity.c: Test suite for the get_opacity() and
get_abs_opacity() API, and correct opacity handling.
* README: Add note about the change in get_opacity().
* clutter/clutter-actor.[ch]:
* clutter/clutter-types.h:
* doc/reference/clutter-docs.sgml: Fix a lot of documentation.
2008-02-15 Matthew Allum <mallum@openedhand.com>
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
(clutter_group_query_coords):
Added function to translate vertex array to a bounding box.
(clutter_actor_is_scaled):
(clutter_actor_is_rotated):
Fixed documentation.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
(clutter_actor_is_scaled):
(clutter_actor_is_rotated):
Convenience functions to test whether actor is scaled or rotated.
(clutter_actor_apply_relative_transform_to_point):
Removed unused variable.
* clutter/clutter-group.c:
(clutter_group_query_coords):
Use clutter_actor_get_relative_vertices() to calculate bounding
boxes of children that are scaled or rotated.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
(clutter_actor_get_relative_vertices):
(clutter_actor_apply_relative_transform_to_point):
Functions to calculate actor vertices in the plane of a given
ancestor.
* clutter/clutter-actor.c:
Minor documentation tweak to class description.
* clutter/clutter-behaviour-scale.c:
'Force' start + end vals of scale behaviour
(#779, Havoc Pennington)
* clutter/clutter-actor.c (clutter_actor_transform_stage_point):
Moved part of the calculation to floating point to avoid overflow
of ClutterFixed range for large actors (bug 613).
* clutter/clutter-actor.c:
(clutter_actor_set_property):
Fixed handling of PROP_ROTATE_CENTER_Y, ROTATE_CENTER_Z
* tests/test-actors.c:
Adjusted to use anchor point for both group and hands.
(_clutter_actor_apply_modelview_transform): perform translation as
well as anchor point adjustment based on self not being stage (and
not by self not being an orphan).
* clutter/clutter-actor.c: (clutter_actor_get_vertices):
Make sure GL related Matrices are initialised. Fixes#756
* clutter/clutter-texture.c:
Fix up code from Norways answer to Jean-Michel Basquiat.
(warning on tile_get_pixbuf)
renamed clutter_actor_apply_shader to be clutter_actor_set_shader.
Reindented/aligned header.
* clutter/clutter-texture.c: (clutter_texture_paint): temporarily
disable the shader on top of the clutter context's shader stack while
rendering into the FBO.
* tests/test-fbo.c: (main): s/apply_shader/set_shader/
* tests/test-shader.c: (button_release_cb), (main):
s/apply_shader/set_shader/
* clutter/clutter-actor.c:
(clutter_actor_get_property): Use clutter_actor_get_reactive()
instead of the IS_REACTIVE() macro.
(clutter_actor_set_reactive): Emit the notify signal for the
reactive property.
* clutter/clutter-timeline.c:
(timeline_timeout_func),
(clutter_timeline_get_delta): Coding style fixes.
* clutter/clutter-actor.c:
(clutter_actor_transform_vertices):
Call clutter_actor_query_coords() instead of accessing the actor
box, so that actors that calculate their bounding box on the fly
(like ClutterGroup) work.
* (_clutter_actor_apply_modelview_transform_recursive):
Made to work for parentless actors.
* clutter/clutter-actor.c (clutter_actor_init): Explicitly
memset() to 0 the clip container, so if you get the clip without
having set it, you won't get garbage.
2008-01-31 Rob Bradford <rob@openedhand.com>
* clutter.symbols: Add clutter_actor_move_byu()
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_move_by),
(clutter_actor_move_byu): Add a units-based variant of the
clutter_actor_move_by() function
reviewed by: <delete if not using a buddy>
* clutter/clutter-actor.c:
(parse_rotation_array): Inline, and get the JsonArray as a parameter
(parse_rotation): Update
* clutter/clutter-script.c:
(warn_missing_attribute): Fix for emacs-style warnings
(clutter_script_parse_node): Remove an ifdeffed out section
(clutter_script_construct_parameters),
(clutter_script_construct_object): Rename get_parameters, so
it's obvious what it does
* clutter.symbols: Add clutter_actor_set_clipu() and
clutter_actor_get_clipu()
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_set_clipu), (clutter_actor_get_clipu): Add the
new units-based versions of the clip accessors
(clutter_actor_set_clip), (clutter_actor_get_clip): Reimplement
the pixels-based clip accessors as proxies for the units-based
ones
* clutter/cogl/cogl.h: Update cogl_clip_set() to accept the
clip components as ClutterFixed values
* clutter/cogl/gl/cogl.c (cogl_clip_set): Update the GL implementation
of cogl_clip_set()
* clutter/cogl/gles/cogl.c:
(cogl_rectangle_internal): Provide an internal, inlined rectangle
drawing function using fixed point values, to be shared by
cogl_clip_set() and cogl_rectangle()
(cogl_clip_set), (cogl_rectangle): Update the GLES implementation
of cogl_clip_set() and cogl_rectangle() to use the new internal
rectangle drawing function
* clutter/clutter-actor.c: Make the clip an array of ClutterUnit
values instead of pixel-based; this allows higher precision and
device independence
(_clutter_actor_apply_modelview_transform): Pass the clip
components converting from units to fixed point values, using
the new cogl_clip_set() signature
(clutter_actor_get_property), (clutter_actor_set_clip),
(clutter_actor_get_clip): Update the accessors of the clip
property
* clutter/clutter-actor.c:
(clutter_actor_should_pick_paint),
(clutter_actor_apply_transform_to_point): Fix the whitespace.
(clutter_actor_set_rotation): Clarify that the coordinates of
the centre of rotation are relative to the anchor point or,
if not set, to the upper left corner of the bounding box.
* clutter/clutter-actor.c: Clarify the set_clip() method
documentation, pointing out that the clip area origin is
always the top-left corner of an actor.
* clutter/clutter-actor.c: (clutter_actor_paint),
(clutter_actor_apply_shader): queue a redraw of actor when shader is
set.
* clutter/clutter-actor.h: indentation.
* clutter/clutter-shader.[ch]: made the fragment and vertex shader
sources properties. Report error through GError when binding shaders.
* tests/test-shader.c: modified to use newer API.
* clutter/clutter-actor.c:
(clutter_actor_set_property),
(clutter_actor_get_property),
(clutter_actor_class_init): Add the rotation-* properties,
controlling the rotation angle and center on each axis. (#614)
(parse_rotation_array), (parse_rotation),
(clutter_actor_parse_custom_node),
(clutter_actor_set_custom_property),
(clutter_scriptable_iface_init): Add a new "rotation" custom
property for expressing the rotation along each axis in a
compact way:
"rotation" : [
{ "x-axis" : [ <angle>, [ <y>, <z> ] ] },
{ "y-axis" : [ <angle>, [ <x>, <z> ] ] },
{ "z-axis" : [ <angle>, [ <x>, <y> ] ] }
]
(clutter_geometry_get_type),(clutter_vertex_get_type),
(clutter_actor_box_get_type): Use the I_() macro instead of
directly calling g_intern_static_string().
* clutter/clutter-entry.c (clutter_entry_request_coords):
* clutter/clutter-label.c (clutter_label_ensure_layout),
(clutter_label_request_coords): Use CLUTTER_UNITS_FROM_DEVICE()
instead of CLUTTER_UNITS_FROM_INT(), as "device" means "pixels".
* clutter/clutter-private.h: Add the I_() macro for intern
static strings.
* tests/test-script.json: Test the newly added "rotation"
custom property.
* clutter/clutter-actor.c:
(_clutter_actor_apply_modelview_transform):
Moved offset translation after rotation so that rotation coords
are also relative to the offset point.
* clutter/clutter-actor.c: Document the values for full
transparency and full opacity in the set_opacity()
method. (#662)
* clutter/clutter-behaviour-ellipse.c: Improve consistency
in the apidoc.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
(clutter_actor_get_sizeu),
(clutter_actor_get_positionu): Add unit-based accessors to
the size and position.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* tests/Makefile.am:
* tests/test-unproject:
(clutter_actor_transform_stage_point):
Added new function for translating stage coordinates into local
actor coordinates.
* clutter/clutter-actor.c (parse_units),
(clutter_actor_parse_custom_node): Do not allow using percentages
of the stage on the stage itself, as it makes little to no
sense.
* clutter/clutter-script.c:
(clutter_script_construct_object): Rearrange code.
* tests/test-script.json: Do not set the size of the stage, to
test for the stage size percentage.
* clutter/clutter-actor.c (parse_units),
(clutter_actor_parse_custom_node),
(clutter_scriptable_iface_init): Override the parsing code
for the x, y, width and height properties of ClutterActor,
to allow strings with modifiers when defining the position
and/or the dimensions of an actor. Bare integers are assumed
as pixels; floating point values in the [0, 1] interval are
assumed as percentages; strings can have these modifiers:
- px - pixels
- mm - millimeters
- pt - points (at the current resolution)
- % - percentage of the stage
* clutter/clutter-units.h: Fix the conversion macros
* tests/test-script.json: Test the new values.
* clutter/clutter-actor.h:
* clutter/clutter-actor.c:
Converted depth and rotation offsets to ClutterUnit.
(clutter_actor_set_depthu):
(clutter_actor_get_depthu):
Additional ClutterUnit API.
(_clutter_actor_apply_modelview_transform):
Use cogl_translatex() in place of cogl_translate().
* clutter/NEWS:
Started 0.6.0 section with comment on actor anchor point.
* clutter/clutter/clutter-actor.c:
* clutter/clutter/clutter-actor.h:
* clutter/clutter/clutter-behaviour-scale.c:
* clutter/clutter/clutter-deprecated.h:
(clutter_actor_set_anchor_point):
(clutter_actor_set_anchor_pointu):
(clutter_actor_get_anchor_point):
(clutter_actor_get_anchor_pointu):
(clutter_actor_set_anchor_point_from_gravity):
New anchor point API deprecating old gravity scaling, added
comments on modelview matrix construction to ClutterActor
documentation.
(clutter_actor_set_scale_with_gravity):
(clutter_actor_set_scale_with_gravityx):
Deprecated; use clutter_actor_set_anchor_point_from_gravity() instead.
