With the recent change to internal floating point values, ClutterUnit
has become a redundant type, defined to be a float. All integer entry
points are being internally converted to floating point values to be
passed to the GL pipeline with the least amount of conversion.
ClutterUnit is thus exposed as just a "pixel with fractionary bits",
and not -- as users might think -- as generic, resolution and device
independent units. not that it was the case, but a definitive amount
of people was convinced it did provide this "feature", and was flummoxed
about the mere existence of this type.
So, having ClutterUnit exposed in the public API doubles the entry
points and has the following disadvantages:
- we have to maintain twice the amount of entry points in ClutterActor
- we still do an integer-to-float implicit conversion
- we introduce a weird impedance between pixels and "pixels with
fractionary bits"
- language bindings will have to choose what to bind, and resort
to manually overriding the API
+ *except* for language bindings based on GObject-Introspection, as
they cannot do manual overrides, thus will replicate the entire
set of entry points
For these reason, we should coalesces every Actor entry point for
pixels and for ClutterUnit into a single entry point taking a float,
like:
void clutter_actor_set_x (ClutterActor *self,
gfloat x);
void clutter_actor_get_size (ClutterActor *self,
gfloat *width,
gfloat *height);
gfloat clutter_actor_get_height (ClutterActor *self);
etc.
The issues I have identified are:
- we'll have a two cases of compiler warnings:
- printf() format of the return values from %d to %f
- clutter_actor_get_size() taking floats instead of unsigned ints
- we'll have a problem with varargs when passing an integer instead
of a floating point value, except on 64bit platforms where the
size of a float is the same as the size of an int
To be clear: the *intent* of the API should not change -- we still use
pixels everywhere -- but:
- we remove ambiguity in the API with regard to pixels and units
- we remove entry points we get to maintain for the whole 1.0
version of the API
- we make things simpler to bind for both manual language bindings
and automatic (gobject-introspection based) ones
- we have the simplest API possible while still exposing the
capabilities of the underlying GL implementation
Redundant clearing of depth and stencil buffers every render can be very
expensive, so cogl now gives control over which auxiliary buffers are
cleared.
Note: For now clutter continues to clear the color, depth and stencil buffer
each paint.
Currently, all timelines install a timeout inside the TimeoutPool
they share. Every time the main loop spins, all the timeouts are
updated. This, in turn, will usually lead to redraws being queued
on the stages.
This behaviour leads to the potential starvation of timelines and
to excessive redraws.
One lesson learned from the games developers is that the scenegraph
should be prepared in its entirety before the GL paint sequence is
initiated. This means making sure that every ::new-frame signal
handler is called before clutter_redraw() is invoked.
In order to do so a TimeoutPool is not enough: we need a master
clock. The clock will be responsible for advancing all the active
timelines created inside a scene, but only when the stage is
being redrawn.
The sequence is:
+ queue_redraw() is invoked on an actor and bubbles up
to the stage
+ if no redraw() has already been scheduled, install an
idle handler with a known priority
+ inside the idle handler:
- advance the master clock, which will in turn advance
every playing timeline by the amount of milliseconds
elapsed since the last redraw; this will make every
playing timeline emit the ::new-frame signal
- queue a relayout
- call the redraw() method of the backend
This way we trade multiple timeouts with a single frame source
that only runs if a timeline is playing and queues redraws on
the various stages.
If we need to check that the layout sequence is correct in
terms of order of execution and with respect to caching, then
having a CLUTTER_DEBUG_LAYOUT debug flag would make things
easier.
Bug 1495 - Timelines run 4% short
Previously the timelines were timed by calculating the interval
between each frame stored as an integer number of milliseconds so some
precision is lost. For example, requesting 60 frames per second gets
converted to 16 ms per frame which is actually 62.5 frames per
second. This makes the timeline shorter by 4%.
This patch merges the common code for timing from the timeout pools
and frame sources into an internal clutter-timeout-interval file. This
stores the interval directly as the FPS and counts the number of
frames that have been reached instead of the elapsed time.
The fog and perspective API is currently split in two parts:
- the floating point version, using values
- the fixed point version, using structures
The relative properties are using the structure types, since they
are meant to set multiple values at the same time. Instead of
using bare values, the whole API should be coalesced into two
simple calls using structures to match the GObject properties.
Thus:
clutter_stage_set_fog (ClutterStage*, const ClutterFog*)
clutter_stage_get_fog (ClutterStage*, ClutterFog*)
clutter_stage_set_perspective (ClutterStage*, const ClutterPerspective*)
clutter_stage_get_perspective (ClutterStage*, ClutterPerspective*)
Which supercedes the fixed point and floating point variants.
More importantly, both ClutterFog and ClutterPerspective should
using floating point values, since that's what get passed to
COGL anyway.
ClutterFog should also drop the "density" member, since ClutterStage
only allows linear fog; non-linear fog distribution can be achieved
using a signal handler and calling cogl_set_fog() directly; this keeps
the API compact yet extensible.
Finally, there is no ClutterStage:fog so it should be added.
Grabs are an entirely evil way to override the whole event delivery
machinery that Clutter has in place.
A pointer grab can be effectively replaced by a much more reliable
::captured-event signal handler, for instance.
Sometimes, grabs are a necessary evil -- and that is why Clutter
exposes them in the API; that should not fool anyone into thinking
that they should be used unless strictly necessary.
When event delivery is invoked by synthetic events through
clutter_do_event from inside an event handler clutter was silently
ignoring it, this warning will hopefully help resolving some issues.
The font options accessors in ClutterBackend only deal with const
cairo_font_options_t values, since:
- set_font_options() will copy the font options
- get_font_options() will return a pointer to the internal
font options
Not using const in these cases makes the API confusing and might lead
to erroneous calls to cairo_font_options_destroy().
Instead of using a fixed size array for storing the scenegraph sub-node
during event delivery we should use a GPtrArray. The benefits are:
- a smaller allocation
- no undocumented yet binding constraint on the scenegraph size
The environment variable to disable mipmapping should also be
a command line switch, and be handled like the rest of Clutter's
environment variables/command line switches.
Clutter is able to show debug messages written using the CLUTTER_NOTE()
macro at runtime, either by using an environment variable:
CLUTTER_DEBUG=...
or by using a command line switch:
--clutter-debug=...
--clutter-no-debug=...
Both are parsed during the initialization process by using the
GOption API.
COGL would benefit from having the same support.
In order to do this, we need a cogl_get_option_group() function in
COGL that sets up a GOptionGroup for COGL and adds a pre-parse hook
that will check the COGL_DEBUG environment variable. The OptionGroup
will also install two command line switches:
--cogl-debug
--cogl-no-debug
With the same semantics of the Clutter ones.
During Clutter initialization, the COGL option group will be attached
to the GOptionContext used to parse the command line options passed
to a Clutter application.
Every debug message written using:
COGL_NOTE (SECTION, "message format", arguments);
Will then be printed only if SECTION was enabled at runtime.
This whole machinery, like the equivalent one in Clutter, depends on
a compile time switch, COGL_ENABLE_DEBUG, which is enabled at the same
time as CLUTTER_ENABLE_DEBUG. Having two different symbols allows
greater granularity.
Mipmapped text is enabled by default in Clutter but it can cause
problems on some drivers so it is convenient to have an environment
variable to disable it for all apps.
Add annotations such as (transfer-none) (out) (element-type ClutterActor),
and so forth to the doc comments as appropriate.
The annotations added here are a combination of the annotations previously
in gir-repository for Clutter and annotations found in a review of all
return values with that were being parsed with a transfer of "full".
http://bugzilla.openedhand.com/show_bug.cgi?id=1452
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
cogl_paint_init was a bit too miscellaneous; it mainly cleared the color, depth
and stencil buffers but arbitrarily it also disabled fogging and lighting.
It no longer disables lighting, since we know Cogl never enables lighting and
disabling of fog is now handled with a seperate function.
Since I noticed cogl_set_fog was taking a density argument documented as
"Ignored" I've also added a mode argument to cogl_set_fog which exposes the
exponential fog modes which can make use of the density.
In generate_enter_leave_events it passes the device pointer from the
event to set_motion_last_actor but it was reading it directly from
event->motion.device. However the function is also used to process
button events so it would read from the wrong location in this case.
The device location in the union happened to be in the same place as
the click_count field of ClutterButtonEvent so it only mattered if the
click_count is non-zero. The X11 backend doesn't set this but
Clutter-GTK does so it was causing a crash.
Bug 1178 - No enter / leave events on actors when pointer leaves the
stage window
The patch is mostly thanks to Johan Bilien with small modifications
based on suggestions by Owen Taylor.
The X11 backend now listens for enter and leave notifications. Leave
notifications get translated directly to a CLUTTER_LEAVE
event. Clutter can detect these special events because the source
actor is NULL in which case it sets the source actor to the last known
actor and then sets the last known actor to NULL.
Enter notifications just get translated to CLUTTER_MOTION events which
will cause Clutter to generate an enter event through the usual code
path.
Moved clutter_stage_set_title() before call to clutter_actor_realize()
to ensure _NET_WM_NAME is set early enough for use by interested WM's,
Signed-off-by: Shane Bryan <shane.bryan@linux.intel.com>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The clutter_get_current_event_time() is a global function for
retrieving the timestamp of the current event being propagated
by Clutter. Such function avoids the need to propagate the
timestamp from within user code.
Instead of having a separate set of font options that override the
backend options when clutter_set_font_flags is called, it now just
directly sets the backend font options. So now the font flags are just
a convenience wrapper around the backend font options.
This also makes the ClutterText labels automatically update when the
font flags are changed because they will respond to the 'font-changed'
signal from the backend.
Conflicts:
clutter/cogl/gl/cogl-texture.c
clutter/cogl/gles/cogl-primitives.c
* cogl-material:
clutter-{clone-,}texture weren't updating their material opacity.
Updates GLES1 support for CoglMaterial
Normalizes gl vs gles code in preperation for synching material changes
Removes cogl_blend_func and cogl_alpha_func
Fully integrates CoglMaterial throughout the rest of Cogl
[cogl-material] Restore the GL_TEXTURE_ENV_MODE after material_rectangle
[cogl-material] Make the user_tex_coords parameter of _rectangle const
[test-cogl-material] Remove return value from material_rectangle_paint
Add cogl-material.h and cogl-matrix.h to libclutterinclude_HEADERS
[cogl-material] improvements for cogl_material_rectangle
[cogl-material] Adds a cogl_material_set_color function
[cogl-material] Some improvements for how we sync CoglMaterial state with OpenGL
[cogl-material] Converts clutter-texture/clutter-clone-texture to the material API
[doc] Hooks up cogl-material reference documentation
Updates previous GLES multi-texturing code to use CoglMaterial
Adds a CoglMaterial abstraction, which includes support for multi-texturing
[doc] Hooks up cogl-matrix reference documentation
Adds CoglMatrix utility code
[tests] Adds an interactive unit test for multi-texturing
[multi-texturing] This adds a new cogl_multi_texture API for GL,GLES1 + GLES2
The hope is that this function makes it easier to extend the font
settings with more flags without having to add a function for every
setting.
A new flag for enabling hinting has been added. If set, this changes
the font options on the global PangoContext and any newly created
PangoContexts. The options are only set if the flag is changed from
the default so it won't override any detailed setting chosen by the
backend.
This glues CoglMaterial in as the fundamental way that Cogl describes how to
fill in geometry.
It adds cogl_set_source (), which is used to set the material which will be
used by all subsequent drawing functions
It adds cogl_set_source_texture as a convenience for setting up a default
material with a single texture layer, and cogl_set_source_color is now also
a convenience for setting up a material with a solid fill.
"drawing functions" include, cogl_rectangle, cogl_texture_rectangle,
cogl_texture_multiple_rectangles, cogl_texture_polygon (though the
cogl_texture_* funcs have been renamed; see below for details),
cogl_path_fill/stroke and cogl_vertex_buffer_draw*.
cogl_texture_rectangle, cogl_texture_multiple_rectangles and
cogl_texture_polygon no longer take a texture handle; instead the current
source material is referenced. The functions have also been renamed to:
cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords
and cogl_polygon respectivly.
Most code that previously did:
cogl_texture_rectangle (tex_handle, x, y,...);
needs to be changed to now do:
cogl_set_source_texture (tex_handle);
cogl_rectangle_with_texture_coords (x, y,....);
In the less likely case where you were blending your source texture with a color
like:
cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */
cogl_texture_rectangle (tex_handle, x, y,...);
you will need your own material to do that:
mat = cogl_material_new ();
cogl_material_set_color4ub (r,g,b,a);
cogl_material_set_layer (mat, 0, tex_handle));
cogl_set_source_material (mat);
Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use
cog_rectangle_with_texure_coords since these are the coordinates that
cogl_rectangle will use.
For cogl_texture_polygon; as well as dropping the texture handle, the
n_vertices and vertices arguments were transposed for consistency. So
code previously written as:
cogl_texture_polygon (tex_handle, 3, verts, TRUE);
need to be written as:
cogl_set_source_texture (tex_handle);
cogl_polygon (verts, 3, TRUE);
All of the unit tests have been updated to now use the material API and
test-cogl-material has been renamed to test-cogl-multitexture since any
textured quad is now technically a test of CoglMaterial but this test
specifically creates a material with multiple texture layers.
Note: The GLES backend has not been updated yet; that will be done in a
following commit.
Continuation of the fix in commit 00a3c69868.
Instead of using a separate flag for the resize process, just
delay the setting of the CLUTTER_ACTOR_SYNC_MATRICES flag on the
stage to the point when we receive a ConfigureNotify event from
X11.
This commit will break the stage embedding into other toolkits.
There is a race condition when we resize a stage before showing
it on X11.
The race goes like this:
- clutter_init() creates the default stage and realize it, which
will cause a 640x480 Window to be created
- call set_size(800, 600) on the stage will cause the Window to be
resized to 800x600
- call show() on the stage for the first time will cause COGL
to set up an 800 by 600 GL viewport
- the Window will be mapped, which will cause X to notify the
window manager that the Window should be resized to 800x600
- the window manager will approve the resize
- X resizes the drawable to 800x600
To fix the race, we need to defer COGL from setting up the viewport
until we receive a ConfigureNotify event and the X server has resized
the Drawable.
In order to defer the call to cogl_setup_viewport() we add a new
private flag, CLUTTER_STAGE_IN_RESIZE; the flag is checked whenever
we need to change the viewport size along with the SYNC_MATRICES
private flag. Thus, cogl_setup_viewport() will be called only if
SYNC_MATRICES is set and IN_RESIZE is not set.
Merge branch 'text-actor'
* text-actor: (108 commits)
Re-align ClutterText header file
[text] Fix cursor sizing
Comments and whitespace fixes to ClutterText
[docs] Add newly added :single-line-mode accessors
Update the ignore file
[tests] Add text field interactive test
[text] Add single-line-mode to ClutterText
[text] Fix the deletion actions
[text] Use cached length when possible
[tests] Add unit for the ClutterText:password-char property
[docs] Update the Text section
[text] Coalesce text visibility and password character
Allow localizations to change the text direction
Clean up the update_pango_context() function
Pass the PangoContext, not the MainContext
Revert the logic of the PangoContext check
Remove the binding pool entry from the list
Remove BindingPool::list_actions()
Add ClutterActor::create_pango_context()
Rename the PangoContext creation functions
...
The locale translators of Clutter are also the ones that should set
the default direction of the text in a Clutter user interface.
This commit adds a translatable string that defines the direction
of the text; the translation authors will change it to the correct
value and that will determine the default direction.
The default text direction can be overridden by using the
CLUTTER_TEXT_DIRECTION environment variable, or by using the
--clutter-text-direction command line switch. In any other case,
the locale will determine the text direction, as it should.
Clutter has a set of command line options that are added to every
application by means of clutter_init() or by obtaining the Clutter
GOptionGroup and using g_option_context_parse(). Thus, every Clutter
application will automatically have an --help command line switch
showing the list of options and their description.
At the moment, Clutter does not enable localization of the help,
thus making it less than useful on non-English locales.
This patch enables the machinery to create a localization file and
load it when initializing Clutter, by means of the GLib macros and
locale.h API we already use.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
When updating the PangoContext with the current options (font name,
options, resolution) pass the PangoContext instead of the Clutter
MainContext structure pointer.
The _clutter_context_create_pango_context() should create a new
context; the function returning the PangoContext stored inside the
MainContext structure should be named _get_pango_context() instead.
The direction of the text depends on the locale, and it is the
basic setting needed to enable internationalization of user
interfaces.
This commit allows setting the direction of the PangoContext instance
used by Clutter by using the CLUTTER_TEXT_DIRECTION environment
variable, or by passing the --clutter-text-direction command line
argument. Valid values are:
ltr - for left-to-right locales
rtl - for right-to-left locales
The default is LTR.
Ideally, this should be a value set by the localization teams on the
PO file, but this step requires some build system surgery to allow
the translation of the Clutter strings.
When the ClutterBackend notifies of changes in the resolution or
font options, update the PangoContext stored by Clutter's main
context. This allows changing the backend font-related settings at
runtime.
The PangoContext should be stored once, and inside the main
Clutter context. Each actor for which clutter_actor_get_pango_context()
has been called will hold a reference on the Pango context as well.
This makes it possible to update the text rendering for Clutter
by using only public API.
Bug 1014 - Clutter Animation API Improvements
* clutter/Makefile.am:
* clutter/clutter.h: Update the build
* clutter/clutter-types.h: Add AnimationMode, an enumeration
for easing functions.
* clutter/clutter-alpha.[ch]: Add the :mode property to
control the function bound to an Alpha instance using an
enumeration value. Also add six new alpha functions:
- ease-in, ease-out, ease-in-out
- sine-in, sine-out, sine-in-out
* clutter/clutter-deprecated.h: Deprecate the #defines for
the alpha functions. They will be replaced by entries in the
ClutterAnimationMode.
* clutter/clutter-interval.[ch]: Add ClutterInterval, an
object for defining, validating and computing an interval
between two values.
* clutter/clutter-animation.[ch]: Add ClutterAnimation, an
object responsible for animation the properties of a single
actor along an interval of values. ClutterAnimation memory
management is automatic. A simple wrapper method for
ClutterActor is provided:
clutter_actor_animate()
which will create, or update, an animation for the passed
actor.
* clutter/clutter-debug.h:
* clutter/clutter-main.c: Add a new 'animation' debug note.
* clutter/clutter-script.c: Clean up the alpha functions
whitelist, and add the new functions.
* doc/reference/clutter/Makefile.am:
* doc/reference/clutter/clutter-sections.txt: Update the
API reference.
* doc/reference/clutter/clutter-animation.xml: Renamed to
doc/reference/clutter/clutter-animation-tutorial.xml to
avoid clashes with the ClutterAnimation section.
* doc/reference/clutter/clutter-docs.sgml: Renamed to
doc/reference/clutter/clutter-docs.xml, as it was an XML
file and not a SGML file.
* tests/Makefile.am:
* tests/interactive/Makefile.am:
* tests/interactive/test-animation.c:
* tests/interactive/test-easing.c: Add two tests for the
new simple animation API and the easing functions.
* tests/interactive/test-actors.c:
* tests/interactive/test-behave.c:
* tests/interactive/test-depth.c:
* tests/interactive/test-effects.c:
* tests/interactive/test-layout.c:
* tests/interactive/test-multistage.c:
* tests/interactive/test-paint-wrapper.c:
* tests/interactive/test-rotate.c:
* tests/interactive/test-scale.c:
* tests/interactive/test-texture-quality.c:
* tests/interactive/test-threads.c:
* tests/interactive/test-viewport.c: Update interactive tests
to the deprecations and new alpha API.
* clutter/clutter-main.c (_clutter_id_to_color): When using fuzzy
picking to pick a color for an actor, it would previously set the
fuzzy bit and then all but the most significant of the remaining
unused bits. This meant that for 16-bit displays it would end up
with a strange pattern for the unused bits like 1011 which could
cause it to round up. Now it just sets all but the most
significant of all of the unused bits giving a pattern like
0111. Thanks to Guy Zadickario for the patch.
Bug 1200 - Crash with invalid DISPLAY
* clutter/clutter-main.c: Use the ClutterBackend wrapper API
instead of directly checking the class structure.
* clutter/glx/clutter-backend-glx.c: Return the correct value
in case of failure.
* clutter/x11/clutter-backend-x11.c: Bail out if XOpenDisplay()
failed.
Bug 1210 - Add CoglColor API
* clutter/cogl/cogl-color.h:
* clutter/cogl/cogl.h.in:
* clutter/cogl/common/Makefile.am:
* clutter/cogl/common/cogl-color.c:
* clutter/cogl/gl/Makefile.am:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-texture.c:
* clutter/cogl/gles/cogl.c: Add a new color-type, to be used by
COGL. CoglColor is optimized to allow the minimum amount of
conversions possible for both GL and GLES implementations.
* clutter/clutter-actor.c:
* clutter/clutter-clone-texture.c:
* clutter/clutter-entry.c:
* clutter/clutter-main.c:
* clutter/clutter-rectangle.c:
* clutter/clutter-stage.c:
* clutter/clutter-texture.c: Use CoglColor when needed.
* clutter/pango/pangoclutter-render.c: Use CoglColor when needed.
* doc/reference/cogl/cogl-docs.sgml:
* doc/reference/cogl/cogl-sections.txt: Update the documentation.
* tests/test-cogl-offscreen.c:
* tests/test-cogl-primitives.c:
* tests/test-cogl-tex-convert.c:
* tests/test-cogl-tex-foreign.c:
* tests/test-cogl-tex-getset.c:
* tests/test-cogl-tex-polygon.c:
* tests/test-cogl-tex-tile.c:
* tests/test-paint-wrapper.c: Update the tests.
* README: Update release notes.
* clutter/clutter-main.c (_clutter_do_pick): After picking is
finished, restore the state of glEnable (GL_DITHER). Otherwise it
will cause the scene to look different after the first pick on low
depth displays. (Thanks to Michael Boccara for the patch)
Handle dropped motion events when computing crossing events,
based on a patch from Gwenole Beauchesne.
* clutter/clutter-main.c: (clutter_event_get_device): internal static
utility function.
(clutter_do_event): generate enter/leave events for all pointer
events.
(generate_enter_leave_events): modified enter/leave events generator
to work for all pointer event types. Enter/leave events are now
delivered before the motion/button event that caused the crossing to
happen.
* clutter/clutter-event.c: (clutter_event_copy), (clutter_event_free):
removed reference counting logic that is not needed when the crossing
events are directly delivered.
Bug 1130 - CLUTTER_MOTION is not emitted when time goes backwards.
* clutter/clutter-main.c (clutter_do_event): Check for time
rollbacks inside the motion event throttling. (Pierce Liu)
* clutter/clutter-main.c:
* clutter/clutter-main.h:
* clutter/clutter-private.h:
* clutter/x11/clutter-backend-x11.c:
(clutter_get_option_group_without_init):
Function to obtain clutter option group without opening display
(for use with foreign display and gtk_clutter_init). Bug 1033.
Stripped trailing whitespace.
* clutter/clutter-main.c: Don't free the ClutterMainContext so
that the main loop can be restarted.
* clutter/eglx/clutter-backend-egl.c:
* clutter/eglnative/clutter-backend-egl.c: Register an atexit
handler which disposes the backend object so that we are still
guaranteed to call eglTerminate on GLES.
Bug 1033 - Manually parsing command line options prevents
initializing clutter
* clutter/clutter-main.c:
(post_parse_hook), (clutter_init_with_args),
(clutter_parse_args), (clutter_init): Move the initialization
of Clutter at the end of the post-parse hook of Clutter's
GOptionGroup. Clutter must be initialized at the end of the
argument parsing.
* clutter/clutter-main.c: Properly document the
clutter_get_option_group() function and the invariant that
after parsing Clutter's option group the library will be
initialized. (Thanks to Tomas Frydrych for pointing this
out)
* clutter/clutter-main.c (_clutter_id_to_color): When choosing a
pick color, set all but the most significant of the unused
bits. This should make make it more likely that the GL
implementation will round down to the right value.
* tests/test-pick.c: Test case for picking. It creates 192 actors
at known positions and stores their gids. It then calls
clutter_stage_get_actor_at_pos with each position to check that
the right gid is returned.
* tests/Makefile.am (noinst_PROGRAMS): Add test-pick
* clutter/clutter-main.c:
Destroy the debugging timer when the context is freed.
* clutter/clutter-stage.c:
Free the stage title when the stage is finalized.
Bug 1033 - Manually parsing command line options prevents
initializing clutter (Armin Burgmeier)
* clutter/clutter-main.c:
(post_parse_hook), (clutter_init_real): Set the is_initialized
flag inside the real initialization function.
* clutter/clutter-event.c: (clutter_event_get_device_id): swap
arguments of g_return_val_if_fail around.
* clutter/clutter-event.h: added *device field to crossing events as
well.
* clutter/clutter-main.c: (emit_pointer_event): added a device
argument and check for per device grabs if this device is passed.
(clutter_do_event): pass the device if present for all pointer event
emissions.
(generate_enter_leave_events): copy the device from the motion events
when generating enter/leave events.
Bug #960 - PangoContext creation code should not be duplicated
* clutter/clutter-private.h:
* clutter/clutter-main.c:
(_clutter_context_create_pango_context): Abstract the creation
of the PangoContext inside its own function, to avoid code and
bugs duplication. (Tommi Komulainen)
* clutter/clutter-entry.c (clutter_entry_init): Use the newly
added PangoContext creation function.
* clutter/clutter-label.c (clutter_label_init): Ditto as above.
Bug #815 - Split up request, allocation, and paint box
* clutter/clutter-actor.[ch]: Rework the size allocation,
request and paint area. Now ::request_coords() is called
::allocate(), and ::query_coords() has been split into
::get_preferred_width() and ::get_preferred_height(). See
the documentation and the layout test on how to implement
a container and layout manager with the new API. (#915,
based on a patch by Havoc Pennington, Lucas Rocha and Johan
Bilien)
* clutter/clutter-clone-texture.c: Port CloneTexture to
the new size negotiation API; it just means forwarding
the requests to the parent texture.
* clutter/clutter-deprecated.h: Add deprecated and replaced
API.
* clutter/clutter-entry.c: Port Entry to the new size
negotiation API.
* clutter/clutter-group.c: Port Group to the new size
negotiation API; the semantics of the Group actor do not
change.
* clutter/clutter-label.c: Port Label to the new size
negotiation API, and vastly simplify the code.
* clutter/clutter-main.[ch]: Add API for executing a
relayout when needed.
* clutter/clutter-private.h: Add new Stage private API.
* clutter/clutter-rectangle.c: Update the get_abs_opacity()
call to get_paint_opacity().
* clutter/clutter-stage.c:
(clutter_stage_get_preferred_width),
(clutter_stage_get_preferred_height),
(clutter_stage_allocate),
(clutter_stage_class_init): Port Stage to the new size
negotiation API.
* clutter/clutter-texture.c: Port Texture to the new size
negotiation API.
* clutter/clutter-types.h: Add ClutterRequestMode enumeration.
* clutter/x11/clutter-stage-x11.c: Port the X11 stage
implementation to the new size negotiation API.
* tests/Makefile.am: Add the layout manager test case.
* tests/test-opacity.c: Update.
* tests/test-project.c: Update.
* tests/test-layout.c: Test case for a layout manager implemented
using the new size negotiation API; the layout manager handles
both transformed and untransformed children.
* autogen.sh: Check for, and run glib-gettextize.
* configure.ac: Set up the localization support.
* clutter/clutter-main.c: Do not define the GETTEXT_PACKAGE,
but use the one from the configure script.
* po/POTFILES.in: Template for the translatable files.
Bug #943 - Signals are only emitted within a certain area of
the stage
* clutter/clutter-main.c (clutter_do_event): Use the proper
API and not the macros for the default stage, in case we are
using a backend supporting multiple stages. (Julian Aron Prenner)
Bug #919 - Replacement pango renderer (Neil Roberts)
* clutter/clutter-backend.h:
* clutter/clutter-backend.c:
(clutter_backend_set_font_options),
(clutter_backend_get_font_options): Add the ability to set
the cairo_font_options_t* for the backend at construction
time, so that backend implementations can have their own
options.
* clutter/clutter-color.c: Include pango/pango-attributes.h
for the pango_color_parse() function.
* clutter/clutter-label.c:
(clutter_label_ensure_layout),
(clutter_label_init), (clutter_label_set_text),
(clutter_label_set_font_name), (clutter_label_set_ellipsize),
(clutter_label_set_use_markup): Ensure that the cache is
always primed when the Label changes; this makes sure that
the cache is rebuilt outside the paint run, which should
make the painting perform better especially on embedded
devices.
* clutter/clutter-entry.c:
(clutter_entry_ensure_layout),
(clutter_entry_init), (clutter_entry_set_text),
(clutter_entry_set_font_name): Ditto as above.
* clutter/clutter-private.h:
* clutter/clutter-main.[ch]: Create the font-map inside the
main context; add two new functions:
clutter_clear_glyph_cache()
clutter_set_use_mipmapped_text()
that control the glyphs cache.
* clutter/pango/Makefile.am:
* clutter/pango/pangoclutter-fontmap.c:
* clutter/pango/pangoclutter-private.h:
* clutter/pango/pangoclutter-render.c:
* clutter/pango/pangoclutter.h: Rewrite the Pango renderer
using a PangoCairo context and saving the glyphs inside a
more efficient cache.
* configure.ac: Depend on pangocairo instead of pangoft2.
* clutter/clutter-actor.c:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
Rejid Øyvind's previous commit a little moving more into
clutter-main.c and using ClutterContext.
Also Refactor clutter_init & clutter_init_with_args to share
same core init code.
framebuffer are only approximately the correct value.
* clutter/clutter-actor.c:
(init_bits): initialize constants about how many bits are
available/will be used for r,g,b components.
(_clutter_pix_to_id): now own function, compute an id from a
pixel into its own function (used from _clutter_do_pick).
(_clutter_id_to_col): now own function, computes the color to use for
a given id.
(clutter_actor_paint): use clutter_id_to_col.
* clutter/clutter-main.c:
(_clutter_do_pick): use _clutter_pix_to_id
(clutter_main): re-enable invocation of fruity app shell.
Rework the stage wrapper/implementation relation: remove
duplicated code and all the bookkeeping from the backends into
ClutterStage whenever possible, to reduce the amount of work a
backend must do (and possibly get wrong). Thanks to Tommi
Komulainen.
* clutter/clutter-main.c:
(clutter_init_with_args), (clutter_init): Realize the default
stage after creation. The default stage is special, because we
use it in the initialization sequence. This removes the burden
from the backends and reduces the things a backend can get
wrong.
* clutter/clutter-stage.c:
(clutter_stage_show): Make sure to realize the implementation if
it hasn't been realized yet.
(clutter_stage_realize): Set the REALIZED flag and call
clutter_stage_ensure_current() if the implementation was
successfully realized.
(clutter_stage_unrealized): Call clutter_stage_ensure_current()
on unrealize.
* clutter/glx/clutter-backend-glx.c:
(clutter_backend_glx_create_stage): Do not realize the stage anymore
when creating it, and let the normal realization sequence take
place.
(clutter_backend_glx_ensure_context): Trap for X11 errors.
* clutter/glx/clutter-stage-glx.c:
(clutter_stage_glx_realize): Chain up to the X11 implementation
so that we can set up the window state (title, cursor visibility)
when we actually have a X window. Also, do not call
clutter_stage_ensure_current(), and rely on the wrapper to do
it for us. This means we can drop setting the REALIZED flag on
the wrapper.
(clutter_stage_glx_unrealize): Do not call
clutter_stage_ensure_current() ourselves, and rely on the wrapper
to do it for us.
* clutter/x11/clutter-stage-x11.c:
(set_wm_title), (set_cursor_visible): Move the WM title and
cursor visibility code inside their own functions.
(clutter_stage_x11_realize): Set the window title and whether the
cursor is visible or not after realizing the stage.
(clutter_stage_x11_set_cursor_visible),
(clutter_stage_x11_set_title): Call set_wm_title() and
set_cursor_visible().
(clutter_stage_x11_finalize): Free the title string.
* clutter/x11/clutter-stage-x11.h: Save more of the stage state,
so that we can set it even when the stage hasn't been realized
yet.
* clutter/eglnative/clutter-backend-egl.c:
(clutter_backend_egl_create_stage):
* clutter/eglnative/clutter-stage-egl.c:
(clutter_stage_egl_unrealize),
(clutter_stage_egl_realize): Update the eglnative backend.
* clutter/eglx/clutter-backend-egl.c:
(clutter_backend_egl_ensure_context),
(clutter_backend_egl_create_stage):
* clutter/eglx/clutter-stage-egl.c:
(clutter_stage_egl_unrealize),
(clutter_stage_egl_realize): Update the eglx backend.
* clutter/sdl/clutter-backend-sdl.c:
(clutter_backend_sdl_create_stage):
* clutter/sdl/clutter-stage-sdl.c:
(clutter_stage_sdl_realize): Update the sdl backend.
* clutter/fruity/clutter-backend-fruity.c:
(clutter_backend_fruity_create_stage):
* clutter/sdl/clutter-stage-fruity.c:
(clutter_stage_fruity_realize): Update the fruity backend.
* tests/test-multistage.c (on_button_press): Bail out if
clutter_stage_new() returns NULL.
* HACKING.backends: Update backend writing documentation.
(clutter_frame_source_add_full): Add gtk-doc and rename the
'function' parameter to 'func'.
* clutter/clutter-frame-source.h: Rename the 'function' parameters
to 'func'.
* clutter/Makefile.am (source_h): Make clutter-frame-source.h a
public header.
* clutter/clutter-main.c (clutter_threads_add_frame_source_full):
Improve gtk-doc
* doc/reference/clutter/clutter-sections.txt: Added
clutter_threads_add_frame_source,
clutter_threads_add_frame_source_full,
clutter_frame_source_add and clutter_frame_source_add_full.
* clutter/clutter-frame-source.h:
* clutter/clutter-frame-source.c:
New files that contain a replacement for g_timeout that try to
cope with system delays.
* clutter/Makefile.am: Added clutter-frame-source.{c,h}
* clutter/clutter-timeline.c (timeout_add): Use a frame source
instead of a g_timeout.
* clutter/clutter-main.c (clutter_threads_add_frame_source_full)
(clutter_threads_add_frame_source): New public functions to wrap a
frame source and grab the Clutter mutex.
* clutter/clutter-timeout-pool.c: Now calculates the timeout
expiration times in the same way as a frame source does so that it
counts time in frame intervals instead of setting the next
expiration time as an offset from the current time.
Bug #864 - Allow instantiating and subclassing of ClutterStage
* clutter/Makefile.am: Add clutter-stage-window.[ch]
* clutter/clutter-stage-manager.c:
(_clutter_stage_manager_remove_stage): Do not warn if removing
a stage we don't manage, as we might be invoked multiple times
during a ClutterState dispose sequence.
* clutter/clutter-actor.c:
* clutter/clutter-backend.[ch]:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/clutter-stage.[ch]: Make ClutterStage a proxy actor,
with a private actor implementing the ClutterStageWindow
interface for handling the per-backend realization, painting
and unrealization, plus all the windowing system abstraction.
* clutter/x11/clutter-event-x11.c:
* clutter/x11/clutter-stage-x11.[ch]: Port the X11 backend
to the new backend and stage API and semantics.
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-stage-glx.c: Port the GLX backend to
the new backend and stage API and semantics.
* clutter/eglx/clutter-backend-egl.[ch]:
* clutter/eglx/clutter-stage-egl.[ch]: Port the EGLX backend
to the new backend and stage API and semantics (untested).
* tests/test-multistage.c (on_button_press): Rename
clutter_stage_create_new() to clutter_stage_new().
* clutter/clutter-id-pool.c: (clutter_id_pool_free):
Use g_slice_free not g_free.
* clutter/clutter-main.c: (_clutter_do_pick):
Dont 'over read' the framebuffer when picking (#839, Neil Roberts)
contained data structure.
* clutter/clutter-id-pool.[ch]: new files.
* clutter/Makefile.am: added clutter-id-pool.[ch]
* clutter/clutter-private.h: use a ClutterIDPool instead of GArray and
GSList to keep track of the reusable ids.
* clutter/clutter-actor.c: moved id pool logic away.
* clutter/clutter-main.c: simplified id pool creation/finalization.
of overflowing the id numbers when continusly creating and destroying
actors on long running applications for 16bpp.
* clutter/clutter-private.h: replaced hashtable with GArray and a
GSList for available slots in the array.
* clutter/clutter-actor.c: (create_actor_id): function to create an
actor->id mapping, (release_actor_id): function to mark an existing id
as available for reuse.
* clutter/clutter-main.c: (clutter_context_free): added utility
function for cleaning up the context,
(clutter_get_actor_by_gid): use the GArray for looking up actors.
* clutter/clutter-actor.c: Remove the usage of g_return_if_fail()
from static functions: either assert or use g_warning() to check
internal state, as g_return_if_fail() can be compiled out.
* clutter/clutter-main.c: Ditto as above.
* clutter/x11/clutter-x11.h:
* clutter/x11/clutter-backend-x11.c:
(clutter_x11_set_display):
Function to set X display connection prior to calling
clutter_init(); stripped loads of trailing space.
* clutter/clutter-main.c (generate_enter_leave_events): Do not
take the explicit reference, and let clutter_event_copy() do it
for us. (#714, Neil Roberts)
* clutter/clutter-main.c (clutter_do_event): Check the
return value of the ::event signal for the CLUTTER_DELETE
event type.
* clutter/clutter-stage.c (clutter_stage_event): Emit the
::event signal when receiving the CLUTTER_DELETE event; this
allows to intercept the user's closing of the stage window.
enter event (without related) and corresponding leave event when the
actor the cursor is over has been destroyed.
* clutter/clutter-event.c: (clutter_event_free): only unref the
related_actor when it actually is set.
* clutter/clutter-main.c:
(unset_motion_last_actor),
(generate_enter_leave_events): Attach a callback to the destroy
signal on the last motion actor, so if it goes away while the
pointer is in the middle of it we can unset the pointer.
* clutter/clutter-private.h: Store the last motion actor inside
the global context.
* clutter/clutter-score.h: Rearrange declarations.
* clutter/clutter-score.c: More documentation in the long
description of the ClutterScore section.
* clutter/clutter-debug.h:
* clutter/clutter-main.c: Add the CLUTTER_DEBUG_SHADER flag,
for debugging the shader calls.
* clutter/clutter-feature.h: Fix the documentation of the
feature flags.
* clutter/Makefile.am: Remove trailing whitespace.
click_count generation code.
* tests/test-events.c: (input_cb): extended test to report click_count
for release and scroll events as well as press events.
* clutter.symbols: Update
* clutter/clutter-actor.h: Rename the angle argument for
set_rotationx() to avoid gtk-doc complaining
* clutter/clutter-main.h:
* clutter/clutter-main.c:
(clutter_set_motion_events_enabled): Rename for consistency
(clutter_get_motion_events_frequency),
(clutter_set_motion_events_frequency): Add accessors for the default
motion events deliver frequency.
(clutter_do_event): Throttle down motion events delivery using the
motion events frequency setting, to avoid excessive redraws. (#608)
(clutter_context_get_default): Enable per-actor motion events, at
least for now.
* tests/test-events.c (red_button_cb):
* tests/test-grab.c (green_press_cb): Update.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-group.c:
* clutter/clutter-main.c:
* clutter/clutter-stage.c:
* tests/test-events.c:
Parent Actors no longer need to be set reactive for reactive
children to get events. Also makes groups now pickable.
(#597, #423)
* clutter/clutter-texture.c:
Handle case when 1x1 tiled texture is created,
falling 'back' to being non tiled. (#596)
* clutter/eglx/clutter-backend-egl.c:
Call EglTerminate on backend shutdown.
(emit_pointer_event): utility function to emit pointer event signals
(which takes pointer grab into account).
(emit_keyboard_event): utility function to emit keyboard event signals
(which takes keyboard grab into account).
(clutter_do_event): use the above utility functions, also reindented
the source.
clutter_ungrab_keyboard and clutter_get_keyboard_grab, in
clutter_do_event deliver keyboard related events only to the
actor with the keyboard grab if a grab exists.
* clutter/clutter-private.h: added keyboard_grab_actor to context.
* tests/test-grab.c: added testing for testing the keyboard grab.
* clutter/clutter-actor.[ch]: Massive API clean-ups. Initial
fixes for bugs #614 and #628.
* clutter/clutter-main.c:
* clutter/clutter-stage.c: Update internal usage of the actor
API.
* tests/test-events.c: Update test suite.
clutter_ungrab_pointer and clutter_get_pointer_grab, in
clutter_do_event deliver pointer related events only to the
actor with the pointer grab if a grab exists.
* clutter/clutter-private.h: added pointer_grab_actor to context.
* tests/Makefile.am:
* tests/test-grab.c: added test for testing the pointer grab.
rearanged other structs to have source in the same position.
* clutter/clutter-event.c: (clutter_event_get_source): modified to use
the any event.
(clutter_event_free): removed unused variable.
* clutter/clutter-main.c: (deliver_event), (clutter_do_event): reduced
amount of code. As well as deliver button-release events to the stage.
* clutter/clutter-main.c: Add a --clutter-default-fps run-time
switch and CLUTTER_DEFAULT_FPS environment variable support for
setting the default frame-rate at run-time.
* clutter/clutter-timeline.[ch]: Added ClutterTimeline:duration,
a property for setting the duration of a timeline in milliseconds.
The property comes with accessors and a new constructor. The
frame rate used is the default value.
* clutter/clutter-private.h:
* clutter/clutter-main.[ch]: Add clutter_get_default_frame_rate()
and clutter_set_default_frame_rate(); these two functions control
the default frame rate to be used when creating timelines. Currently
is set to 60 frames-per-second.
* clutter/clutter-actor.c:
More events documentation.
* clutter/clutter-event.c:
* clutter/clutter-event.h:
Add synthetic flag and make put_event use it
(via modded patch from pippin)
* clutter/clutter-main.c: (clutter_do_event):
dont use put event anymore when pushing enter/leave events.
* clutter/clutter-actor.c: Remove the ::event-after signal:
three event layers to connect to seems a bit overkill.
(clutter_actor_event): Return FALSE, not TRUE by default,
as g_signal_emit() will change the return value if no
handlers are connected
* clutter/clutter-stage.c: Emit ::notify when we change
the fullscreen property.
* clutter/clutter-script.c: Add more documentation for the
definition format and keywords.
(translate_property): Collapse the G_TYPE_ENUM and G_TYPE_FLAGS
cases into one, to simplify the code.
* tests/test-script.c: Test enumeration conversion by using
a value different from the default.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-private.h:
* clutter/clutter-main.c:
Add a hash to global clutter context mapping all parented actor
id's to actors.
Add clutter_get_actor_by_id() call.
Convert picking machinery to use above.
(performance/simpler composite actor creation)
* clutter/clutter-stage.c: (clutter_stage_fullscreen),
(clutter_stage_unfullscreen), (clutter_stage_event):
Only set the fullscreen property on stage state fullscreen event(#545)
Experimental as could be painful to implement on non X backends.
Initial implementation of the UI definition files. (#424)
* clutter/json/Makefile.am:
* clutter/json/*.[ch]: In-tree copy of JSON-GLib, a GLib-based
JSON parser/generator library. We use it in-tree because we might
need to change the API. Ideally, we'd depend on it.
* clutter/clutter.h:
* clutter/clutter-script-private.h:
* clutter/clutter-script.[ch]: ClutterScript, the scenegraph
generator class. It parses JSON streams in form of buffers and
files and builds the scene.
* clutter/clutter-debug.h:
* clutter/clutter-main.c: Add a "script" debug flag
* clutter/Makefile.am: Build glue.
* tests/Makefile.am:
* tests/test-script.c: Add a test case for the ClutterScript.
* configure.ac: Depend on GLib 2.14, so we can use the
g_hash_table_get_key() and g_hash_table_get_values() functions
for the time being; we can probably reimplement those, but we
are going to need 2.14 anyway if we are going to implement a
list model using GSequence.
* clutter/clutter-actor.[ch]: Remove the ::event-after signal
class handler, as it's not meant to be overridden by sub-classes.
(clutter_actor_class_init):
Make every event-related signal return a boolean: return TRUE
in a signal handler to block the emission. The value is accumulated
automatically by the signal API.
(clutter_actor_event): If ::event returns TRUE, skip to emitting
::event-after. Return the value accumulated by the signal emission
chain.
* clutter/clutter-private.h: Rename _clutter_boolean_accumlator().
* clutter/clutter-main.c (clutter_do_event): If clutter_actor_event()
returns TRUE then stop the event emission chain from child to parent.
* clutter/clutter-stage.c (clutter_stage_event): Behave like
clutter_actor_event().
(clutter_stage_get_key_focus),
(clutter_stage_set_key_focus): Avoid a nasty circular reference
issue: if the actor passed to set_key_focus is NULL then the stage
has the key focus.
* tests/test-events.c: Update the events test with the API
changes.
* clutter/clutter-main.c: (_clutter_do_pick):
Call glFinish before reading pixels
* clutter/eglx/clutter-stage-egl.c: (clutter_stage_egl_realize):
Add missing read surface in making context current.
Above fixes via Kate Alhola.
* clutter/glx/clutter-glx.h:
Add missing filter funcs so there actually exported
* clutter/clutter-actor.c:
* clutter/clutter-event.h:
* clutter/clutter-main.c:
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-backend-glx.h:
* clutter/glx/clutter-event-glx.c:
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-stage-glx.h:
Add initial support for stage state events.
Fix fullscreening for an already mapped stage.
* tests/test-events.c:
Print out info from the above. Blue button now toggles
fullscreen.
* clutter/clutter-effect.c:
* clutter/clutter-effect.h:
Add a setting for templates to ref or clone underlying
timelines. (As to improve sync issues like those in foofone)
* tests/test-timeline.c:
Also add completed signals.
* clutter/cogl/gles/cogl.c: (cogl_texture_image_2d):
* configure.ac:
Forward port from stable branch. RGB Image fixes gles
and check for lower case libgles_cm.
The GLib main loop allows destroying sources while still in the dispatcher
function, so whether the Clutter threading lock is being held or not is
actually unpredictable by the library. This might be fixed in GLib, so we
just do what GTK+ does for the time being and wait.
See bug: http://bugzilla.gnome.org/show_bug.cgi?id=459555
Some of the API landed in trunk has been backported to the stable branch
after testing. This patch updates the Since: tag in the API reference to
reflect the time when the API was first added to a release.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-event.c:
* clutter/clutter-event.h:
* clutter/clutter-main.c:
* clutter/clutter-main.h:
* clutter/clutter-private.h:
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/clutter-types.h:
Initial implementation of actors emmitting event signals (423);
- Actors set_reactive() to receive mouse events.
(call clutter_enable_motion_events() for per action motion events)
- clutter_stage_set_key_focus () to direct key events.
- Events bubble up to parents (ending at stage)
(original source identified by clutter_event_get_source())
TODO:
- enter/leave notifys for actors.
- stage specific events - fullscreen
- grabs
* tests/test-events.c:
Extend a little to use new API
* clutter/cogl/gl/cogl.c:
* clutter/glx/clutter-backend-glx.c:
Move get_proc_address into cogl and out of backend.
(shaders will need it)
* clutter/clutter-group.c: (clutter_group_real_lower):
Fix a minor compile warning.
* TODO:
Sync up.
The threads_enter() and threads_leave() functions are no-ops because Clutter
is not thread-aware nor thread-safe. Leaving them in is a source of confusion
so we just remove them.
Update the NEWS and the README files with the release notes.
* clutter/clutter-main.c (clutter_redraw): Move the stage
paint init call from the main redraw function...
* clutter/clutter-stage.c (clutter_stage_paint): ... to the
ClutterActor::paint() overridden method in ClutterStage.
* TODO:
Sync up a little.
* clutter/clutter-main.c:
Set a default window title based on g_prgname().
* clutter/clutter-stage.c:
* clutter/clutter-stage.h:
* clutter/egl/clutter-stage-egl.c:
* clutter/glx/clutter-stage-glx.c:
* clutter/sdl/clutter-stage-sdl.c:
Alter draw_to_pixbuf to return a pixbuf
* configure.ac:
Only full in gdk-pixbuf-xlib as a GLX backend dep.
* tests/test-entry.c:
Fix a couple of warnings.
* clutter/clutter-container.[ch]: Add a generic actor container
interface, for actors to implement without subclassing ClutterGroup.
* clutter/clutter-group.[ch]: Make ClutterGroup implement the
ClutterContainer interface, and deprecate the colliding methods.
* clutter/clutter-layout.[ch]: Add extended layout interface.
Actors and containers requiring or honouring complex layout
management should implement this interface and provide at least
one of the available layout types: width for height, height for
width, natural size, iterative size request.
* clutter/clutter-label.c: A ClutterLabel requires height for
width layout management, so it implements the ClutterLayout
interface.
* clutter/Makefile.am: Add new files to the build.
* tests/*.c:
* examples/*.c: Update tests and examples code to use the
new ClutterContainer API instead of ClutterGroup.
* clutter/clutter-backend.c:
* clutter/clutter-backend.h:
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-backend-glx.c:
Fix up rendering pipeline removing clutter_backend_XXX_stage_paint
and adding clutter_backend_XXX_redraw instead. Duplicates less
code in backends, avoids clutter_actor_paint() getting called
before stage is set up (viewport wise) and unbreaks things like
picking.
* clutter/clutter-actor.c:
* clutter/clutter-actor.h:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/clutter-stage.c: (clutter_stage_get_actor_at_pos):
Redo picking functionality a different way (via color indexing)
as to provide more flexibility, possibly speed and more likely
work with GL/ES (doesn't currently however - not sure why).
* clutter/clutter-group.c:
Add groups own 'pick' method.
* clutter/cogl/cogl.h:
* clutter/cogl/gl/cogl.c:
* clutter/cogl/gles/cogl.c:
Move clipping funtionality into cogl.
* clutter/cogl/gles/cogl-defines.h:
Hack around missing BGR format in GL/ES.
* clutter/egl/clutter-backend-egl.c:
* clutter/egl/clutter-backend-egl.h:
* clutter/egl/clutter-stage-egl.c:
* clutter/sdl/clutter-backend-sdl.c:
* clutter/sdl/clutter-backend-sdl.h:
* clutter/sdl/clutter-event-sdl.c:
* clutter/sdl/clutter-stage-sdl.c:
Update backends to newer API.
Add basic mouse event translation to SDL.
Use clutter_base_init() instead of g_type_init(), as it calls the type
function for ClutterActor and allows the compiler to use a constant value
instead of the computed result.
Add a semi-private function, called clutter_base_init(), which initialises
the basic Clutter functionalities (at the moment, just the GLib type system)
without calling in the backend-specific code. This function is only useful
for gtk-doc, to introspect the library when generating documentation for
signals, properties and class hierarchy.
Also, change the documentation build system to use clutter_base_init() when
launching the scanner program.
* clutter/clutter-backend.c:
* clutter/clutter-backend.h:
* clutter/clutter-event.c:
* clutter/clutter-main.c:
* clutter/clutter-private.h:
* clutter/glx/clutter-backend-glx.c:
* clutter/glx/clutter-backend-glx.h:
* clutter/glx/clutter-event-glx.c:
Rejig backend event code as to simplify a little.
NOTE: This breaks non glx backends.
* tests/Makefile.am:
* tests/test-events.c:
Add a very simple event test.
* tests/test-textures.c: (main):
Add some more sizes to the test.
* clutter/Makefile.am:
* clutter/clutter-debug.h:
* clutter/clutter-fixed.h:
* clutter/clutter-main.c:
* clutter/cogl/gles/Makefile.am:
* clutter/cogl/gles/cogl-defines.h:
* clutter/cogl/gles/cogl.c:
* clutter/egl/clutter-backend-egl.c:
* clutter/egl/clutter-backend-egl.h:
* clutter/egl/clutter-stage-egl.c:
* configure.ac:
Populate most stubs for cogl GL/ES implementation.
(against vincent - see http://svn.o-hand.com/repos/misc/ogles)
Add various fixups to EGL backend.
Code builds and runs (on 16bpp) but yet displays much (is close!)
* clutter/pango/pangoclutter-render.c:
comment out some rouge glBegin/end calls.
Merge from clutter.git/master
* clutter/glx/clutter-event-glx.c:
* clutter/glx/clutter-stage-glx.c: Implement the _NET_WM_PING
protocol handling on the main stage window.
* clutter/clutter-stage.h:
* clutter/clutter-stage.c:
* clutter/clutter-main.c: Handle CLUTTER_DELETE events internally,
by calling clutter_main_quit(), and remove the ::delete-event
signal from ClutterStage; clean up the signal emission sequence
for the events: emit the ::event signal before emitting any signal
and the ::event-after signal after the signal has been emitted; move
the signal emission calls inside ClutterStage so we can call
g_signal_emit() instead of g_signal_emit_by_name(), thus sparing us
a lookup for each event.
* examples/test.c: Remove ::delete-event signal handling.
Use the right marshaller signature (boolean:boxed) for the delete-event
signal handlers. Add a debug note in clutter_main_do_event() to track the
signal return. Test the delete-event handler inside test.c.
Supporting WM_PROTOCOLS allows handling the WM_DELETE_WINDOW ClientMessage,
which is then relayed to the ClutterStage actor in form of the "delete-event"
signal. Returning TRUE will block the propagation and won't close the
stage window.
* clutter/clutter-private.h:
* clutter/clutter-backend.h: Move the backend functions
into the private header.
* clutter/glx/clutter-stage-glx.c:
* clutter/glx/clutter-event-glx.c:
* clutter/clutter-main.c:
* clutter/clutter-stage.c: Update the calls to the private
backend functions.
* clutter/clutter-backend.[ch]: Add an ::init_features
vfunc to ClutterBackend.
* clutter/clutter-private.h: Remove inclusion of backend-specific
headers; update the main context object; add the declarations for
the event queue functions.
* clutter/clutter-backend.[ch]: Add the abstract ClutterBackend
object, which holds backend-specific settings, the main stage,
and the event queue. Every backend must implement a subclass of
ClutterBackend and ClutterStage.
* clutter/clutter-feature.c: Protect the GLX specific calls
behing #ifdef HAVE_CLUTTER_GLX.
* clutter/clutter-actor.c:
* clutter/clutter-group.c:
* clutter/clutter-clone-texture.c: Include GL/gl.h
* clutter/clutter-event.[ch]: Update public API and implement the
event queue private API; hold a reference on the event objects;
move out the keysym-to-unicode table; add the new event types.
* clutter/clutter-color.h: Include clutter-fixed.h
* clutter/clutter-main.c: Update API; get the main stage
from the backend object; process the event received from the
queue; lock/unlock the main mutex if we have one; move the
initialisation process sooner in the init sequence, in order to
have the backend object when we check for options; call the
backed vfuncs in the pre/post parse hooks.
* clutter/clutter-stage.c: Make ClutterStage and abstract class,
implemented by the backends.
* clutter/clutter/glx/clutter-glx.h:
* clutter/clutter/glx/clutter-backend-glx.[ch]:
* clutter/clutter/glx/clutter-event-glx.c:
* clutter/clutter/glx/clutter-stage-glx.[ch]:
* clutter/clutter/glx/Makefile.am: Add the GLX backend.
* clutter/clutter/egl/clutter-backend-egl.[ch]:
* clutter/clutter/egl/clutter-event-egl.c:
* clutter/clutter/egl/clutter-stage-egl.[ch]:
* clutter/clutter/egl/Makefile.am: Add the stub for a EGL backend.
* examples/*.c: Update for the new API.
