This adds COGL_PIXEL_FORMAT_RG_88 and COGL_TEXTURE_COMPONENTS_RG in
order to support two-component textures. The RG components for a
texture is only supported if COGL_FEATURE_ID_TEXTURE_RG is advertised.
This is only available on GL 3, GL 2 with the GL_ARB_texture_rg
extension or GLES with the GL_EXT_texture_rg extension. The RG pixel
format is always supported for images because Cogl can easily do the
conversion if an application uses this format to upload to a texture
with a different format.
If an application tries to create an RG texture when the feature isn't
supported then it will raise an error when the texture is allocated.
https://bugzilla.gnome.org/show_bug.cgi?id=712830
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 568677ab3bcb62ababad1623be0d6b9b117d0a26)
Conflicts:
cogl/cogl-bitmap-packing.h
cogl/cogl-types.h
cogl/driver/gl/gl/cogl-driver-gl.c
tests/conform/test-read-texture-formats.c
tests/conform/test-write-texture-formats.c
This updates the cogl_texture_rectangle_new_with_size() api in line with
master to be consistent with other texture constructors. This removes
the internal_format and error arguments and allows the texture to be
allocated lazily which means the texture can be configured with apis
like cogl_texture_set_components() and cogl_texture_set_premultiplied()
before it is allocated.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Texture allocation is now consistently handled lazily such that the
internal format can now be controlled using
cogl_texture_set_components() and cogl_texture_set_premultiplied()
before allocating the texture with cogl_texture_allocate(). This means
that the internal_format arguments to texture constructors are now
redundant and since most of the texture constructors now can't ever fail
the error arguments are also redundant. This now means we no longer
use CoglPixelFormat in the public api for describing the internal format
of textures which had been bad solution originally due to how specific
CoglPixelFormat is which is missleading when we don't support such
explicit control over the internal format.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 99a53c82e9ab0a1e5ee35941bf83dc334b1fbe87)
Note: there are numerous API changes for functions currently marked
as 'unstable' which we don't think are in use by anyone depending on
a stable 1.x api. Compared to the original patch though this avoids
changing the cogl_texture_rectangle_new_with_size() api which we know
is used by Mutter.
When projecting the bounding rectangle of a primitive it was using the
modelview matrix twice instead of the modelview and projection
matrices so it was coming out with garbage.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 7e1f05c84013bb91248d691091df00f4f634c6cf)
The test makes an L-shaped path that fills the whole framebuffer
except for the top right quadrant. It then clips to that and tries to
fill the framebuffer with a rectangle. Then it verifies that all of
the quadrants have the expected colour.
This is currently failing due to a bug in the primitive clipping.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5404033220099b4a3c6cf32a0d269c4e98489fee)
This declares the interface types CoglFramebuffer, CoglBuffer,
CoglTexture, CoglMetaTexture and CoglPrimitiveTexture as void when
including the public cogl.h header so that users don't have to use lots
of C type casts between instance types and interface types.
This also removes all of the COGL_XYZ() type cast macros since they do
nothing more than compile time type casting but it's less readable if
you haven't seen that coding pattern before.
Unlike with gobject based apis that use per-type macros for casting and
performing runtime type checking we instead prefer to do our runtime
type checking internally within the front-end public apis when objects
are passed into Cogl. This greatly reduces the verbosity for users of
the api and may help reduce the chance of excessive runtime type
checking that can sometimes be a problem.
(cherry picked from commit 248a76f5eac7e5ae4fb45208577f9a55360812a7)
Since we can't break the 1.x api this version of the patch actually
defines compatible NOP macros within deprecated/cogl-type-casts.h
Add framebuffer methods cogl_framebuffer_[gs]et_depth_write_enabled()
and backend bits to pass the state on to glDepthMask().
This allows us to enable or disable depth writing per-framebuffer, which
if disabled saves us some work in glClear(). When rendering, the flag
is combined with the pipeline's depth writing flag using a logical AND.
Depth writing is enabled by default.
https://bugzilla.gnome.org/show_bug.cgi?id=709827
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 71406438c5357eb4e0ef03e940c5456a536602a0)
In the cases where we cache vertex state with an ancestor pipeline (whose
vertex processing state is equivalent) we need to invalidate that state
if that ancestor is later modified.
This conformance test checks this case but currently fails because we
only notify the progend directly associated with the pipeline being
changed.
In this case the pipeline can be using a different progend to the
ancestor which it is caching state with so when the ancestor is changed
it needs to notify all the progends that they may need to clear their
private state.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit e112af5f770d6c46688fdcb5ba38b75ca0778891)
Seeing 'fail' in the test reports and the explanation that it means
"Test failed, but it was an expected failure" somewhat gives the
impression that these failures are ok. Actually these failures represent
known bugs/issues that we haven't yet fixed but we don't want them to
result in 'make check' ailing. To try and better reflect the severity of
these issues we now report them as 'FIXME'.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7934bf3ee4356af160b63084c7192fd2965b5ddd)
For some reason the unit test symbols end up in the read-only data
section when building on windows rather than the initialised data
section so they have a different letter in the list generated by nm.
They also begin with an underscore because windows likes to add
underscores to symbols for some reason. This patch changes the regular
expressions in the code to generate the wrapper list so that it
accepts either way.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8bbd4d49fcbaa2add5fb5d544f2c0a08e7658d36)
The unit tests were failing to build with mingw32 because the
libtest-fixtures was being included both by libcogl and the
test-conformance and test-unit executables. That meant that the
symbols were defined twice and it wouldn't link.
The rule which depends on test-unit being built needs to be called
test-unit.exe on Windows so this patch fixes it to use the $(EXEEXT)
variable to get the right name.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 575bac47fee0b425f4fd30761e5819443e6c045f)
Conflicts:
tests/conform/Makefile.am
tests/unit/Makefile.am
This adds a modification to the test-point-sprite test which uses a
shader snippet which directly references cogl_point_coord instead of
relying on cogl_pipeline_set_layer_point_sprite_coords_enabled to
replace the texture coordinates with the point coords.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5ea57b14f5ec7d52ae378f4ca64574ef56342f56)
Full GL treats the position attribute specially and requires that it
must be bound to generic attribute location 0 unlike GLES 2.0 or
GL 3.2 core. We now make sure to unconditionally bind the
cogl_position_in attribute to location 0 before linking any glsl program
in cogl.
For reference the relevant part of the GL 3.0 spec that covers these
semantics is Section 2.7 "Vertex Specification" pg 27
After this change there was one remaining problem in
test-custom-attributes where the test_short_verts() test was using its
own "pos" attribute instead of cogl_position_in and so cogl wasn't able
to ensure it would be bound to location 0.
This updates the test to use cogl_position_in but to work around the
fact that glVertexPointer doesn't support UNSIGNED_SHORT components we
force the test to use the glsl backend by setting a shader snippet on
the pipeline.
https://bugs.freedesktop.org/show_bug.cgi?id=67548
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 992ef7b3b49ebb56adde2133bb36330c04133a3f)
This renames cogl_offscreen_new_to_texture to
cogl_offscreen_new_with_texture. The intention is to then cherry-pick
this back to the cogl-1.16 branch so we can maintain a parallel
cogl_offscreen_new_to_texture() function which keeps the synchronous
allocation semantics that some clutter applications are currently
relying on.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit ecc6d2f64481626992b2fe6cdfa7b999270b28f5)
Note: Since we can't break the 1.x api on this branch this keeps a
thin shim around cogl_offscreen_new_with_texture to implement
cogl_offscreen_new_to_texture with its synchronous allocation
semantics.
This splits out the cogl_path_ api into a separate cogl-path sub-library
like cogl-pango and cogl-gst. This enables developers to build Cogl with
this sub-library disabled if they don't need it which can be useful when
its important to keep the size of an application and its dependencies
down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path
have been renamed to cogl_path_{fill,stroke}.
There were a few places in core cogl and cogl-gst that referenced the
CoglPath api and these have been decoupled by using the CoglPrimitive
api instead. In the case of cogl_framebuffer_push_path_clip() the core
clip stack no longer accepts path clips directly but it's now possible
to get a CoglPrimitive for the fill of a path and so the implementation
of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as
a shim that first gets a CoglPrimitive and uses
cogl_framebuffer_push_primitive_clip instead.
We may want to consider renaming cogl_framebuffer_push_path_clip to
put it in the cogl_path_ namespace.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f)
So as to avoid breaking the 1.x API or even the ABI since we are quite
late in the 1.16 development cycle the patch was modified to build
cogl-path as a noinst_LTLIBRARY before building cogl and link the code
directly into libcogl.so as it was previously. This way we can wait
until the start of the 1.18 cycle before splitting the code into a
separate libcogl-path.so.
This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid
breaking the 1.x API/ABI.
Almost nothing draws attributes directly and for those things that do
it's trivial to adapt them to instead draw via the cogl_primitive api.
This simplifies the Cogl api a bit.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 7395925bcc01aad6c695fd0d9af78b784b3c64d4)
Conflicts:
cogl/cogl-framebuffer.c
cogl/cogl-framebuffer.h
When splitting out the CoglPath api we saw that we would be left with
inconsistent drawing apis if the drawing apis in core Cogl were lumped
into the cogl_framebuffer_ api considering other Cogl sub-libraries or
that others will want to create higher level drawing apis outside of
Cogl but can't use the same namespace.
So that we can aim for a more consistent style this adds a
cogl_primitive_draw() api, comparable to cogl_path_fill() or
cogl_pango_show_layout() that's intended to replace
cogl_framebuffer_draw_primitive()
Note: the attribute and rectangle drawing apis are still in the
cogl_framebuffer_ namespace and this might potentially change but in
these cases there is no single object representing the thing being drawn
so it seems a more reasonable they they live in the framebuffer
namespace for now.
Note: the cogl_framebuffer_draw_primitive() api isn't removed by this
patch so it can more conveniently be cherry picked to the 1.16 branch so
we can mark it deprecated for a short while. Even though it's marked as
experimental api we know that there are people using the api so we'd
like to give them a chance to switch to the new api.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 418912b93ff81a47f9b38114d05335ab76277c48)
Conflicts:
cogl-pango/cogl-pango-display-list.c
cogl/Makefile.am
cogl/cogl-framebuffer.c
cogl/cogl-pipeline-layer-state.h
cogl/cogl2-path.c
cogl/driver/gl/cogl-clip-stack-gl.c
The plan is to remove the cogl-auto-texture apis since they hide a bit
too much from developers but currently the conformance tests depend on
these apis in numerous places.
For the conformance tests it makes some sense to continue using high
level texture apis similar to the auto-texture apis since we may want
to make broad variations to how textures are allocated as part of the
testing running if that might help exercise more code paths.
This patch copies much of the auto-texture functionality into some
slightly more special purpose utilities in test-utils.c/h. Minor changes
include being constrained to the public Cogl api and they also don't
let you catch CoglErrors and just assume they should abort on error.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 911df79776ce6f695351c15e9872b4f1479d30bf)
Conflicts:
tests/conform/test-atlas-migration.c
tests/conform/test-backface-culling.c
tests/conform/test-blend-strings.c
tests/conform/test-color-mask.c
tests/conform/test-just-vertex-shader.c
tests/conform/test-npot-texture.c
tests/conform/test-primitive.c
tests/conform/test-snippets.c
tests/conform/test-texture-get-set-data.c
tests/conform/test-texture-mipmap-get-set.c
tests/conform/test-texture-no-allocate.c
tests/conform/test-wrap-modes.c
Install the conformance tests, and metadata to run them
with gnome-desktop-testing-runner.
https://bugzilla.gnome.org/show_bug.cgi?id=702942
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 53f3eb421239982b69569ad03ccbfa4b4f601cf3)
There was a circular depedency when building from a fresh git clone
where test-fixtures needs to be built before the cogl directory, but
test-fixtures also indirectly includes cogl-enum-types.h which is only
generated when building the cogl directory. If we change the header to
just include specific cogl headers instead of cogl/cogl.h then we can
break the circular dependency.
This needs a tweak to test-no-gl-header because that first undefines
COGL_COMPILATION before including test-utils.h. However it doesn't
really do any actual work so we can get away without including it.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit adb26bd13a48ed571ef4cae4de005e039b34e361)
We want any run-time warnings to cause the conformance tests to fail.
We are currently setting G_DEBUG in test_utils_init and this would
previously cause the fatal-warnings debug option to be set. However
since commit 47444dac of glib this no longer works because the
environment variable is read in a magic constructor of libglib so it
is too late to try to set it there. This patch makes it also set it in
run-tests.sh to avoid the problem.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 95a6d962f5bc2f21bfcdb2f0bc6b55cfa28792b3)
The free function for atlas textures was previously always assuming
that there will be a valid sub_texture pointer but this might not be
the case if the texture was never successfully allocated. This was
causing Cogl to crash if the application tries to make a texture that
can not fit in the atlas using the automagic texture API.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit a7a8b7aefc8cb03fe8b716bee06b3449a7dba85f)
It looks like Cogl doesn't currently clean up an unallocated atlas
texture properly so if it fails to allocate it. It will then crash
when it is freed. This adds a conformance test to verify that all of
the various texture types can be freed without allocating them.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit bfada22d9a7f60baad5ae5615e45f10327e23e36)
Previously the unit tests were using libdl without directly linking to
it. It looks like this ends up working because one of Cogl's
dependencies ends up pulling adding -ldl via libtool. However in some
configurations it looks like this wasn't happening.
To avoid this problem we can just use GModule to resolve the symbols.
g_module_open is documented to return a handle to the ‘main program’
when NULL is passed as the filename and looking at the code it seems
that this ends up using RTLD_DEFAULT so it will have the same effect.
The in-tree copy of glib already has the code for gmodule so this
shouldn't cause problems for --disable-glib.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit b14ece116ed3e4b18d59b645e77b3449fac51137)
This adds a new function to enable per-vertex point size on a
pipeline. This can be set with
cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size
can be set either by drawing with an attribute named
'cogl_point_size_in' or by writing to the 'cogl_point_size_out'
builtin from a snippet.
There is a feature flag which must be checked for before using
per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES
2.0. GL will only let you set a per-vertex point size from GLSL by
writing to gl_PointSize. This is only available in GL2 and not in the
older GLSL extensions.
The per-vertex point size has its own pipeline state flag so that it
can be part of the state that affects vertex shader generation.
Having to enable the per vertex point size with a separate function is
a bit awkward. Ideally it would work like the color attribute where
you can just set it for every vertex in your primitive with
cogl_pipeline_set_color or set it per-vertex by just using the
attribute. This is harder to get working with the point size because
we need to generate a different vertex shader depending on what
attributes are bound. I think if we wanted to make this work
transparently we would still want to internally have a pipeline
property describing whether the shader was generated with per-vertex
support so that it would work with the shader cache correctly.
Potentially we could make the per-vertex property internal and
automatically make a weak pipeline whenever the attribute is bound.
However we would then also need to automatically detect when an
application is writing to cogl_point_size_out from a snippet.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115)
Conflicts:
cogl/cogl-context.c
cogl/cogl-pipeline-private.h
cogl/cogl-pipeline.c
cogl/cogl-private.h
cogl/driver/gl/cogl-pipeline-progend-fixed.c
cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
This moves the code in test-bitmask into a UNIT_TEST() directly in
cogl-bitmask.c which will now be run as a tests/unit/ test.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 693c85e0cde8a1ffbffc03a5f8fcc1f92e8d0ac7)
Includes fix to build conform tests with -I$(top_builddir)/cogl to
be able to find cogl-gl-header.h
This adds a white-box unit test that verifies that GL_BLEND is disabled
when drawing an opaque rectangle, enabled when drawing a transparent
rectangle and then disabled again when drawing a transparent rectangle
but with a blend string that effectively disables blending.
This shares the test utilities and launcher infrastructure we are using
for conformance tests so we get consistent reporting and so unit tests
will be run against a range of different drivers.
This adds a --enable-unit-tests configure option which is enabled by
default but if disabled will make all UNIT_TESTS() into static inline
functions that we should expect the compiler to discard since they won't
be referenced by anything.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 9047cce06bbf9051ec77e622be2fdbb96ed767a8)
This adds a test to make sure that if the same pipeline is used to draw
two primitives, one which doesn't need blending because it has an opaque
color associated, and another using a color attribute that requires
blending then Cogl should recognize that it needs to enable blending for
the second primitive even though the pipeline hasn't changed.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit c15d91f1c6293bebd4494d1e20586121483cddef)
This enables basic Emscripten support in Cogl via the SDL winsys.
Assuming you have setup an emscripten toolchain you can configure Cogl
like this:
emconfigure ./configure --enable-debug --enable-emscripten
Building the examples will build .html files that can be loaded directly
by a WebGL enabled browser.
Note: at this point the emscripten support has just barely been smoke
tested so it's expected that as we continue to build on this we will
learn about more things we need to change in Cogl to full support this
environment.
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit a3bc2e7539391b074e697839dfae60b69c37cf10)
cogl_framebuffer_add_fence creates a synchronisation fence, which will
invoke a user-specified callback when the GPU has finished executing all
commands provided to it up to that point in time.
Support is currently provided for GL 3.x's GL_ARB_sync extension, and
EGL's EGL_KHR_fence_sync (when used with OpenGL ES).
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Reviewed-by: Robert Bragg <robert@linux.intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=691752
(cherry picked from commit e6d37470da9294adc1554c0a8c91aa2af560ed9f)
This adds compiler symbol deprecation declarations for old Cogl APIs so
that users can easily see via compiler warning when they are using these
symbols, and also see a hint for what the apis should be replaced with.
So that users of Cogl can manage when to show these warnings this
introduces a scheme borrowed from glib whereby you can declare what
version of the Cogl api you are using:
COGL_VERSION_MIN_REQUIRED can be defined to indicate the oldest Cogl api
that the application wants to use. Cogl will only warn about
deprecations for symbols that were deprecated earlier than this required
version. If this is left undefined then by default Cogl will warn about
all deprecations.
COGL_VERSION_MAX_ALLOWED can be defined to indicate the newest api
that the application uses. If the application uses symbols newer than
this then Cogl will give a warning about that.
This patch removes the need to maintain the COGL_DISABLE_DEPRECATED
guards around deprecated symbols.
This patch fixes a few uses of deprecated symbols in the examples/
Reviewed-by: Neil Roberts <neil@linux.intel.com>
Some of the examples and tests are using functions from -lm. With some
linkers, if we don't expicitly link against it an error will be
reported. This patch adds the library to all of the examples even
though not all of them use math functions because I don't think it
will do any harm and it will save us having to remember to add it if
an example later starts using some math functions.
https://bugzilla.gnome.org/show_bug.cgi?id=697330
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 66a1aeaee1f7cdcdd505f5745277723a43d714b6)
Conflicts:
examples/Makefile.am
tests/conform/Makefile.am
tests/micro-perf/Makefile.am
When a pipeline is added to the cache, a normal copy would previously be
made to use as the key in the hash table. This copy keeps a reference
to the real pipeline which means all of the resources it contains are
retained forever, even if they aren't necessary to generate the hash.
This patch changes it to create a trimmed down copy that only has the
state necessary to generate the hash. A new function called
_cogl_pipeline_deep_copy is added which makes a new pipeline that is
directly a child of the root pipeline. It then copies over the
pertinent state from the original pipeline. The pipeline state is
copied using the existing _cogl_pipeline_copy_differences function.
There was no equivalent function for the layer state so I have added
one.
That way the pipeline key doesn't have the texture data state and it
doesn't hold a reference to the original pipeline so it should be much
cheaper to keep around.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit e27e01c1215e7e7c7c0183ded11dd769bb112c5c)
Currently when a unique pipeline is created and added to the pipeline
cache that pipeline will live forever which includes keeping a
reference to any large resources that the pipeline has such as
textures. These textures don't actually need to be kept for the
pipeline to be used as a key in the hash table so ideally we wouldn't
do this. This test case tries rendering with a pipeline that has
textures and then checks whether the textures are successfully
destroyed after the pipeline is unreffed. The test is currently marked
as a known failure because the pipeline cache will prevent them from
being destroyed.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 0056f805dadd46b966d57f66b02890b8c29971ac)
Adding a layer difference may mean the pipeline overrides all of the
layers of its parent which might make the parent redundant so we
should try to prune the hierarchy.
This is particularly important for CoglGst because whenever a new
frame is ready it tries to make a copy of the pipeline it last used
and then replace all of the textures in the layers. Without this patch
the new pipeline would keep the parent pipeline alive which means also
keeping the old textures alive so all of the frames of the video would
effectively be leaked.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 576c7b55aa835448c977f1d79d128dffd40e7cd8)
The current recommendation for pipelines is that once they have been
used for painting then they should be considered immutable. If you
want to modify a pipeline you should instead make a copy and unref the
original pipeline. Internally we try to check whether the modified
copy replaces all of the properties of the parent and prune a
redundant ancestor hierarchy. Pruning the hierarchy is particularly
important if the pipelines contain textures because otherwise the
textures may be leaked when the parent pipeline keeps a reference to
it.
This test verifies that usage pattern by creating a chain of pipeline
copies each with their own replacement texture. Some user data is then
set on the textures with a callback so that we can verify that once
the original pipelines are destroyed then the textures are also
destroyed.
The test is currently failing because Cogl doesn't correctly prune
ancestory for layer state authority.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 3fbec92acb90008492eb125025f92b42d6e07930)
This adds hook points to add global function and variable declarations
to either the fragment or vertex shader. The declarations can then be
used by subsequent snippets. Only the ‘declarations’ string of the
snippet is used and the code is directly put in the global scope near
the top of the shader.
The reason this is necessary rather than just adding a normal snippet
with the declarations is that for the other hooks Cogl assumes that
the snippets are independent of each other. That means if a snippet
has a replace string then it will assume that it doesn't even need to
generate the code for earlier hooks which means the global
declarations would be lost.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit ebb82d5b0bc30487b7101dc66b769160b40f92ca)
This fixes some minor errors and warnings that were preventing Cogl
building with mingw32:
• cogl-framebuffer-gl.c was not including cogl-texture-private.h.
Presumably something else ends up including that when building for
GLX.
• The WGL winsys was not including cogl-error-private.h
• A call to strsplit in the WGL winsys was wrong.
• For some reason the test-wrap-rectangle-textures test was trying to
include the GDKPixbuf header.
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit 5380343399f834d9f96ca3b137d49c9c2193900a)
The journal manually flushes its own modelview matrix state so it
needs to mark the state as dirty so that if a primitive is drawn with
the same matrix state as the last primitive it will correctly reflush
it.
https://bugzilla.gnome.org/show_bug.cgi?id=693612
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit c7290c994c742456ff0977cb394c289afb377049)
This adds a conformance test which draws a rectangle using the journal
in-between two rectangles drawn with primitives without changing any
other state. Currently this is failing because the modelview matrix
state is not correctly flushed.
The journal also flushes in own clip state so the test additionally
puts everything in a clip and verifies that that worked. This is not
currently broken but we might as well test it.
https://bugzilla.gnome.org/show_bug.cgi?id=693612
Reviewed-by: Robert Bragg <robert@linux.intel.com>
(cherry picked from commit b703f9a1a98894a12021cbdd632e1d59214e612f)
For the boolean environment variables that affect the running of the
conformance tests we now explicitly check the value of those variables
so that "0", "off" and "false" (upper or lower case) will be considered
as FALSE instead of just interpreting set as TRUE and unset as FALSE. If
the value is set to something entirely spurious then we abort with a
warning message. Thanks to Artie Eoff for suggesting this change.
https://bugzilla.gnome.org/show_bug.cgi?id=693894
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit 25a8cf3607a482ca390eb9841295d1b365cbe53b)
This updates the examples and test-journal which now use the _FRAME_SYNC
events to throttle rendering so that they don't install a redundant idle
handler to paint when they get a FRAME_SYNC event and instead they now
directly paint when the event is received.
(cherry picked from commit 579eb75e6ac6f50d7a9cfe5093435126158b3c96)
This updates test-journal to use the new
cogl_onscreen_add_frame_callback() api to use _SYNC events for
throttling.
(cherry picked from commit 24e6a5376ed3982f5647e2c2df0618272c381636)
