mutter/cogl/cogl/cogl-context-private.h

408 lines
14 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* A Low Level GPU Graphics and Utilities API
*
* Copyright (C) 2007,2008,2009,2013 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*/
#ifndef __COGL_CONTEXT_PRIVATE_H
#define __COGL_CONTEXT_PRIVATE_H
#include "cogl-context.h"
#include "cogl-winsys-private.h"
#include "cogl-flags.h"
#ifdef COGL_HAS_XLIB_SUPPORT
#include "cogl-xlib-private.h"
#endif
#include "cogl-display-private.h"
#include "cogl-primitives.h"
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
#include "cogl-clip-stack.h"
#include "cogl-matrix-stack.h"
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
#include "cogl-pipeline-private.h"
#include "cogl-buffer-private.h"
#include "cogl-bitmask.h"
#include "cogl-atlas.h"
#include "cogl-driver.h"
#include "cogl-texture-driver.h"
#include "cogl-pipeline-cache.h"
#include "cogl-texture-2d.h"
#include "cogl-texture-3d.h"
#include "cogl-texture-rectangle.h"
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 17:20:04 -04:00
#include "cogl-sampler-cache-private.h"
#include "cogl-gpu-info-private.h"
#include "cogl-gl-header.h"
#include "cogl-framebuffer-private.h"
#include "cogl-onscreen-private.h"
#include "cogl-fence-private.h"
#include "cogl-poll-private.h"
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
#include "cogl-path/cogl-path-types.h"
#include "cogl-private.h"
GLES 2 backend * clutter/eglx/clutter-stage-egl.h: * clutter/eglx/clutter-egl-headers.h: * clutter/eglx/clutter-backend-egl.h: * clutter/eglx/Makefile.am: Include the GLES and EGL headers via clutter-egl-headers.h so that the right version can be used depending on whether the GLES 2 wrapper is being used. * configure.ac: Added an automake conditional for whether the GLES 2 wrapper should be used. * clutter/eglx/clutter-stage-egl.c (clutter_stage_egl_realize): Remove the call to glGetIntegerv to get the max texture size. It was being called before the GL context was bound so it didn't work anyway and it was causing trouble for the GLES 2 simulator. * clutter/cogl/gles/stringify.sh: Shell script to convert the shaders into a C string. * clutter/cogl/gles/cogl-gles2-wrapper.h: * clutter/cogl/gles/cogl-gles2-wrapper.c: Wrappers for most of the missing GL functions in GLES 2. * clutter/cogl/gles/cogl-fixed-fragment-shader.glsl: * clutter/cogl/gles/cogl-fixed-vertex-shader.glsl: New shaders for GLES 2 * clutter/cogl/gles/cogl-defines.h.in: Use the @CLUTTER_GL_HEADER@ macro instead of always using the GLES 1 header. * clutter/cogl/gles/cogl-context.h (CoglContext): Include a field for the state of the GLES 2 wrapper. * clutter/cogl/gles/cogl-texture.c: * clutter/cogl/gles/cogl-primitives.c: * clutter/cogl/gles/cogl.c: Use wrapped versions of the GL functions where neccessary. * clutter/cogl/gles/Makefile.am: Add sources for the GLES 2 wrapper and an extra build step to put the GLSL files into a C string whenever the files change.
2008-05-27 13:42:50 -04:00
typedef struct
{
GLfloat v[3];
GLfloat t[2];
GLubyte c[4];
} CoglTextureGLVertex;
struct _CoglContext
{
CoglObject _parent;
CoglDisplay *display;
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
CoglDriver driver;
/* Information about the GPU and driver which we can use to
determine certain workarounds */
CoglGpuInfo gpu;
/* vtables for the driver functions */
const CoglDriverVtable *driver_vtable;
const CoglTextureDriver *texture_driver;
int glsl_major;
int glsl_minor;
/* This is the GLSL version that we will claim that snippets are
* written against using the #version pragma. This will be the
* largest version that is less than or equal to the version
* provided by the driver without massively altering the syntax. Eg,
* we wouldn't use version 1.3 even if it is available because that
* removes the attribute and varying keywords. */
int glsl_version_to_use;
/* Features cache */
unsigned long features[COGL_FLAGS_N_LONGS_FOR_SIZE (_COGL_N_FEATURE_IDS)];
CoglFeatureFlags feature_flags; /* legacy/deprecated feature flags */
unsigned long private_features
[COGL_FLAGS_N_LONGS_FOR_SIZE (COGL_N_PRIVATE_FEATURES)];
CoglBool needs_viewport_scissor_workaround;
CoglFramebuffer *viewport_scissor_workaround_framebuffer;
CoglPipeline *default_pipeline;
CoglPipelineLayer *default_layer_0;
CoglPipelineLayer *default_layer_n;
CoglPipelineLayer *dummy_layer_dependant;
GHashTable *attribute_name_states_hash;
GArray *attribute_name_index_map;
int n_attribute_names;
CoglBitmask enabled_builtin_attributes;
CoglBitmask enabled_texcoord_attributes;
CoglBitmask enabled_custom_attributes;
/* These are temporary bitmasks that are used when disabling
* builtin,texcoord and custom attribute arrays. They are here just
* to avoid allocating new ones each time */
CoglBitmask enable_builtin_attributes_tmp;
CoglBitmask enable_texcoord_attributes_tmp;
CoglBitmask enable_custom_attributes_tmp;
CoglBitmask changed_bits_tmp;
CoglBool legacy_backface_culling_enabled;
[cogl] Make sure we draw upside down to offscreen draw buffers First a few notes about Cogl coordinate systems: - Cogl defines the window origin, viewport origin and texture coordinates origin to be top left unlike OpenGL which defines them as bottom left. - Cogl defines the modelview and projection identity matrices in exactly the same way as OpenGL. - I.e. we believe that for 2D centric constructs: windows/framebuffers, viewports and textures developers are more used to dealing with a top left origin, but when modeling objects in 3D; an origin at the center with y going up is quite natural. The way Cogl handles textures is by uploading data upside down in OpenGL terms so that bottom left becomes top left. (Note: This also has the benefit that we don't need to flip the data we get from image decoding libraries since they typically also consider top left to be the image origin.) The viewport and window coords are mostly handled with various y = height - y tweaks before we pass y coordinates to OpenGL. Generally speaking though the handling of coordinate spaces in Cogl is a bit fragile. I guess partly because none of it was design to be, it just evolved from how Clutter defines its coordinates without much consideration or testing. I hope to improve this over a number of commits; starting here. This commit deals with the fact that offscreen draw buffers may be bound to textures but we don't "upload" the texture data upside down, and so if you texture from an offscreen draw buffer you need to manually flip the texture coordinates to get it the right way around. We now force offscreen rendering to be flipped upside down by tweaking the projection matrix right before we submit it to OpenGL to scale y by -1. The tweak is entirely hidden from the user such that if you call cogl_get_projection you will not see this scale.
2009-10-22 11:13:01 -04:00
/* A few handy matrix constants */
CoglMatrix identity_matrix;
CoglMatrix y_flip_matrix;
Flush matrices in the progend and flip with a vector Previously flushing the matrices was performed as part of the framebuffer state. When on GLES2 this matrix flushing is actually diverted so that it only keeps a reference to the intended matrix stack. This is necessary because on GLES2 there are no builtin uniforms so it can't actually flush the matrices until the program for the pipeline is generated. When the matrices are flushed it would store the age of modifications on the matrix stack so that it could detect when the matrix hasn't changed and avoid flushing it. This patch changes it so that the pipeline is responsible for flushing the matrices even when we are using the GL builtins. The same mechanism for detecting unmodified matrix stacks is used in all cases. There is a new CoglMatrixStackCache type which is used to store a reference to the intended matrix stack along with its last flushed age. There are now two of these attached to the CoglContext to track the flushed state for the global matrix builtins and also two for each glsl progend program state to track the flushed state for a program. The framebuffer matrix flush now just updates the intended matrix stacks without actually trying to flush. When a vertex snippet is attached to the pipeline, the GLSL vertend will now avoid using the projection matrix to flip the rendering. This is necessary because any vertex snippet may cause the projection matrix not to be used. Instead the flip is done as a forced final step by multiplying cogl_position_out by a vec4 uniform. This uniform is updated as part of the progend pre_paint depending on whether the framebuffer is offscreen or not. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-29 09:21:07 -05:00
/* Value that was last used when calling glMatrixMode to avoid
calling it multiple times */
CoglMatrixMode flushed_matrix_mode;
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
/* The matrix stack entries that should be flushed during the next
* pipeline state flush */
CoglMatrixEntry *current_projection_entry;
CoglMatrixEntry *current_modelview_entry;
Flush matrices in the progend and flip with a vector Previously flushing the matrices was performed as part of the framebuffer state. When on GLES2 this matrix flushing is actually diverted so that it only keeps a reference to the intended matrix stack. This is necessary because on GLES2 there are no builtin uniforms so it can't actually flush the matrices until the program for the pipeline is generated. When the matrices are flushed it would store the age of modifications on the matrix stack so that it could detect when the matrix hasn't changed and avoid flushing it. This patch changes it so that the pipeline is responsible for flushing the matrices even when we are using the GL builtins. The same mechanism for detecting unmodified matrix stacks is used in all cases. There is a new CoglMatrixStackCache type which is used to store a reference to the intended matrix stack along with its last flushed age. There are now two of these attached to the CoglContext to track the flushed state for the global matrix builtins and also two for each glsl progend program state to track the flushed state for a program. The framebuffer matrix flush now just updates the intended matrix stacks without actually trying to flush. When a vertex snippet is attached to the pipeline, the GLSL vertend will now avoid using the projection matrix to flip the rendering. This is necessary because any vertex snippet may cause the projection matrix not to be used. Instead the flip is done as a forced final step by multiplying cogl_position_out by a vec4 uniform. This uniform is updated as part of the progend pre_paint depending on whether the framebuffer is offscreen or not. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-29 09:21:07 -05:00
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
CoglMatrixEntry identity_entry;
/* A cache of the last (immutable) matrix stack entries that were
* flushed to the GL matrix builtins */
CoglMatrixEntryCache builtin_flushed_projection;
CoglMatrixEntryCache builtin_flushed_modelview;
GArray *texture_units;
int active_texture_unit;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipelineFogState legacy_fog_state;
/* Pipelines */
CoglPipeline *opaque_color_pipeline; /* used for set_source_color */
CoglPipeline *blended_color_pipeline; /* used for set_source_color */
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *texture_pipeline; /* used for set_source_texture */
GString *codegen_header_buffer;
GString *codegen_source_buffer;
GString *codegen_boilerplate_buffer;
GList *source_stack;
int legacy_state_set;
CoglPipelineCache *pipeline_cache;
/* Textures */
CoglTexture2D *default_gl_texture_2d_tex;
CoglTexture3D *default_gl_texture_3d_tex;
CoglTextureRectangle *default_gl_texture_rect_tex;
/* Central list of all framebuffers so all journals can be flushed
* at any time. */
GList *framebuffers;
/* Global journal buffers */
GArray *journal_flush_attributes_array;
GArray *journal_clip_bounds;
GArray *polygon_vertices;
/* Some simple caching, to minimize state changes... */
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *current_pipeline;
unsigned long current_pipeline_changes_since_flush;
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 10:19:30 -04:00
CoglBool current_pipeline_with_color_attrib;
CoglBool current_pipeline_unknown_color_alpha;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
unsigned long current_pipeline_age;
CoglMaterial: Implements sparse materials design This is a complete overhaul of the data structures used to manage CoglMaterial state. We have these requirements that were aiming to meet: (Note: the references to "renderlists" correspond to the effort to support scenegraph level shuffling of Clutter actor primitives so we can minimize GPU state changes) Sparse State: We wanted a design that allows sparse descriptions of state so it scales well as we make CoglMaterial responsible for more and more state. It needs to scale well in terms of memory usage and the cost of operations we need to apply to materials such as comparing, copying and flushing their state. I.e. we would rather have these things scale by the number of real changes a material represents not by how much overall state CoglMaterial becomes responsible for. Cheap Copies: As we add support for renderlists in Clutter we will need to be able to get an immutable handle for a given material's current state so that we can retain a record of a primitive with its associated material without worrying that changes to the original material will invalidate that record. No more flush override options: We want to get rid of the flush overrides mechanism we currently use to deal with texture fallbacks, wrap mode changes and to handle the use of highlevel CoglTextures that need to be resolved into lowlevel textures before flushing the material state. The flush options structure has been expanding in size and the structure is logged with every journal entry so it is not an approach that scales well at all. It also makes flushing material state that much more complex. Weak Materials: Again for renderlists we need a way to create materials derived from other materials but without the strict requirement that modifications to the original material wont affect the derived ("weak") material. The only requirement is that its possible to later check if the original material has been changed. A summary of the new design: A CoglMaterial now basically represents a diff against its parent. Each material has a single parent and a mask of state that it changes. Each group of state (such as the blending state) has an "authority" which is found by walking up from a given material through its ancestors checking the difference mask until a match for that group is found. There is only one root node to the graph of all materials, which is the default material first created when Cogl is being initialized. All the groups of state are divided into two types, such that infrequently changed state belongs in a separate "BigState" structure that is only allocated and attached to a material when necessary. CoglMaterialLayers are another sparse structure. Like CoglMaterials they represent a diff against their parent and all the layers are part of another graph with the "default_layer_0" layer being the root node that Cogl creates during initialization. Copying a material is now basically just a case of slice allocating a CoglMaterial, setting the parent to be the source being copied and zeroing the mask of changes. Flush overrides should now be handled by simply relying on the cheapness of copying a material and making changes to it. (This will be done in a follow on commit) Weak material support will be added in a follow on commit.
2010-04-08 07:21:04 -04:00
CoglBool gl_blend_enable_cache;
CoglMaterial: Implements sparse materials design This is a complete overhaul of the data structures used to manage CoglMaterial state. We have these requirements that were aiming to meet: (Note: the references to "renderlists" correspond to the effort to support scenegraph level shuffling of Clutter actor primitives so we can minimize GPU state changes) Sparse State: We wanted a design that allows sparse descriptions of state so it scales well as we make CoglMaterial responsible for more and more state. It needs to scale well in terms of memory usage and the cost of operations we need to apply to materials such as comparing, copying and flushing their state. I.e. we would rather have these things scale by the number of real changes a material represents not by how much overall state CoglMaterial becomes responsible for. Cheap Copies: As we add support for renderlists in Clutter we will need to be able to get an immutable handle for a given material's current state so that we can retain a record of a primitive with its associated material without worrying that changes to the original material will invalidate that record. No more flush override options: We want to get rid of the flush overrides mechanism we currently use to deal with texture fallbacks, wrap mode changes and to handle the use of highlevel CoglTextures that need to be resolved into lowlevel textures before flushing the material state. The flush options structure has been expanding in size and the structure is logged with every journal entry so it is not an approach that scales well at all. It also makes flushing material state that much more complex. Weak Materials: Again for renderlists we need a way to create materials derived from other materials but without the strict requirement that modifications to the original material wont affect the derived ("weak") material. The only requirement is that its possible to later check if the original material has been changed. A summary of the new design: A CoglMaterial now basically represents a diff against its parent. Each material has a single parent and a mask of state that it changes. Each group of state (such as the blending state) has an "authority" which is found by walking up from a given material through its ancestors checking the difference mask until a match for that group is found. There is only one root node to the graph of all materials, which is the default material first created when Cogl is being initialized. All the groups of state are divided into two types, such that infrequently changed state belongs in a separate "BigState" structure that is only allocated and attached to a material when necessary. CoglMaterialLayers are another sparse structure. Like CoglMaterials they represent a diff against their parent and all the layers are part of another graph with the "default_layer_0" layer being the root node that Cogl creates during initialization. Copying a material is now basically just a case of slice allocating a CoglMaterial, setting the parent to be the source being copied and zeroing the mask of changes. Flush overrides should now be handled by simply relying on the cheapness of copying a material and making changes to it. (This will be done in a follow on commit) Weak material support will be added in a follow on commit.
2010-04-08 07:21:04 -04:00
CoglBool depth_test_enabled_cache;
CoglDepthTestFunction depth_test_function_cache;
CoglBool depth_writing_enabled_cache;
float depth_range_near_cache;
float depth_range_far_cache;
CoglBool legacy_depth_test_enabled;
CoglBuffer *current_buffer[COGL_BUFFER_BIND_TARGET_COUNT];
/* Framebuffers */
GSList *framebuffer_stack;
CoglFramebuffer *window_buffer;
unsigned long current_draw_buffer_state_flushed;
unsigned long current_draw_buffer_changes;
CoglFramebuffer *current_draw_buffer;
CoglFramebuffer *current_read_buffer;
gboolean have_last_offscreen_allocate_flags;
CoglOffscreenAllocateFlags last_offscreen_allocate_flags;
GHashTable *swap_callback_closures;
int next_swap_callback_id;
Use the Wayland embedded linked list implementation instead of BSD's This removes cogl-queue.h and adds a copy of Wayland's embedded list implementation. The advantage of the Wayland model is that it is much simpler and so it is easier to follow. It also doesn't require defining a typedef for every list type. The downside is that there is only one list type which is a doubly-linked list where the head has a pointer to both the beginning and the end. The BSD implementation has many more combinations some of which we were taking advantage of to reduce the size of critical structs where we didn't need a pointer to the end of the list. The corresponding changes to uses of cogl-queue.h are: • COGL_STAILQ_* was used for onscreen the list of events and dirty notifications. This makes the size of the CoglContext grow by one pointer. • COGL_TAILQ_* was used for fences. • COGL_LIST_* for CoglClosures. In this case the list head now has an extra pointer which means CoglOnscreen will grow by the size of three pointers, but this doesn't seem like a particularly important struct to optimise for size anyway. • COGL_LIST_* was used for the list of foreign GLES2 offscreens. • COGL_TAILQ_* was used for the list of sub stacks in a CoglMemoryStack. • COGL_LIST_* was used to track the list of layers that haven't had code generated yet while generating a fragment shader for a pipeline. • COGL_LIST_* was used to track the pipeline hierarchy in CoglNode. The last part is a bit more controversial because it increases the size of CoglPipeline and CoglPipelineLayer by one pointer in order to have the redundant tail pointer for the list head. Normally we try to be very careful about the size of the CoglPipeline struct. Because CoglPipeline is slice-allocated, this effectively ends up adding two pointers to the size because GSlice rounds up to the size of two pointers. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 13abf613b15f571ba1fcf6d2eb831ffc6fa31324) Conflicts: cogl/cogl-context-private.h cogl/cogl-context.c cogl/driver/gl/cogl-pipeline-fragend-glsl.c doc/reference/cogl-2.0-experimental/Makefile.am
2013-06-08 18:03:25 -04:00
CoglList onscreen_events_queue;
CoglList onscreen_dirty_queue;
CoglClosure *onscreen_dispatch_idle;
CoglGLES2Context *current_gles2_context;
GQueue gles2_context_stack;
/* This becomes TRUE the first time the context is bound to an
* onscreen buffer. This is used by cogl-framebuffer-gl to determine
* when to initialise the glDrawBuffer state */
CoglBool was_bound_to_onscreen;
/* Primitives */
CoglPath *current_path;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *stencil_pipeline;
Bug 1172 - Disjoint paths and clip to path * clutter/cogl/cogl-path.h: * clutter/cogl/common/cogl-primitives.c: * clutter/cogl/common/cogl-primitives.h: * clutter/cogl/gl/cogl-primitives.c: * clutter/cogl/gles/cogl-primitives.c: Changed the semantics of cogl_path_move_to. Previously this always started a new path but now it instead starts a new disjoint sub path. The path isn't cleared until you call either cogl_path_stroke, cogl_path_fill or cogl_path_new. There are also cogl_path_stroke_preserve and cogl_path_fill_preserve functions. * clutter/cogl/gl/cogl-context.c: * clutter/cogl/gl/cogl-context.h: * clutter/cogl/gles/cogl-context.c: * clutter/cogl/gles/cogl-context.h: Convert the path nodes array to a GArray. * clutter/cogl/gl/cogl-texture.c: * clutter/cogl/gles/cogl-texture.c: Call cogl_clip_ensure * clutter/cogl/common/cogl-clip-stack.c: * clutter/cogl/common/cogl-clip-stack.h: Simplified the clip stack code quite a bit to make it more maintainable. Previously whenever you added a new clip it would go through a separate route to immediately intersect with the current clip and when you removed it again it would immediately rebuild the entire clip. Now when you add or remove a clip it doesn't do anything immediately but just sets a dirty flag instead. * clutter/cogl/gl/cogl.c: * clutter/cogl/gles/cogl.c: Taken away the code to intersect stencil clips when there is exactly one stencil bit. It won't work with path clips and I don't know of any platform that doesn't have eight or zero stencil bits. It needs at least three bits to intersect a path with an existing clip. cogl_features_init now just decides you don't have a stencil buffer at all if you have less than three bits. * clutter/cogl/cogl.h.in: New functions and documentation. * tests/interactive/test-clip.c: Replaced with a different test that lets you add and remove clips. The three different mouse buttons add clips in different shapes. This makes it easier to test multiple levels of clipping. * tests/interactive/test-cogl-primitives.c: Use cogl_path_stroke_preserve when using the same path again. * doc/reference/cogl/cogl-sections.txt: Document the new functions.
2008-12-04 08:45:09 -05:00
/* Pre-generated VBOs containing indices to generate GL_TRIANGLES
out of a vertex array of quads */
CoglIndices *quad_buffer_indices_byte;
unsigned int quad_buffer_indices_len;
CoglIndices *quad_buffer_indices;
CoglIndices *rectangle_byte_indices;
CoglIndices *rectangle_short_indices;
int rectangle_short_indices_len;
CoglBool in_begin_gl_block;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 13:54:57 -04:00
CoglPipeline *texture_download_pipeline;
CoglPipeline *blit_texture_pipeline;
GSList *atlases;
GHookList atlas_reorganize_callbacks;
/* This debugging variable is used to pick a colour for visually
displaying the quad batches. It needs to be global so that it can
be reset by cogl_clear. It needs to be reset to increase the
chances of getting the same colour during an animation */
uint8_t journal_rectangles_color;
/* Cached values for GL_MAX_TEXTURE_[IMAGE_]UNITS to avoid calling
glGetInteger too often */
GLint max_texture_units;
GLint max_texture_image_units;
GLint max_activateable_texture_units;
CoglMaterial: Implements sparse materials design This is a complete overhaul of the data structures used to manage CoglMaterial state. We have these requirements that were aiming to meet: (Note: the references to "renderlists" correspond to the effort to support scenegraph level shuffling of Clutter actor primitives so we can minimize GPU state changes) Sparse State: We wanted a design that allows sparse descriptions of state so it scales well as we make CoglMaterial responsible for more and more state. It needs to scale well in terms of memory usage and the cost of operations we need to apply to materials such as comparing, copying and flushing their state. I.e. we would rather have these things scale by the number of real changes a material represents not by how much overall state CoglMaterial becomes responsible for. Cheap Copies: As we add support for renderlists in Clutter we will need to be able to get an immutable handle for a given material's current state so that we can retain a record of a primitive with its associated material without worrying that changes to the original material will invalidate that record. No more flush override options: We want to get rid of the flush overrides mechanism we currently use to deal with texture fallbacks, wrap mode changes and to handle the use of highlevel CoglTextures that need to be resolved into lowlevel textures before flushing the material state. The flush options structure has been expanding in size and the structure is logged with every journal entry so it is not an approach that scales well at all. It also makes flushing material state that much more complex. Weak Materials: Again for renderlists we need a way to create materials derived from other materials but without the strict requirement that modifications to the original material wont affect the derived ("weak") material. The only requirement is that its possible to later check if the original material has been changed. A summary of the new design: A CoglMaterial now basically represents a diff against its parent. Each material has a single parent and a mask of state that it changes. Each group of state (such as the blending state) has an "authority" which is found by walking up from a given material through its ancestors checking the difference mask until a match for that group is found. There is only one root node to the graph of all materials, which is the default material first created when Cogl is being initialized. All the groups of state are divided into two types, such that infrequently changed state belongs in a separate "BigState" structure that is only allocated and attached to a material when necessary. CoglMaterialLayers are another sparse structure. Like CoglMaterials they represent a diff against their parent and all the layers are part of another graph with the "default_layer_0" layer being the root node that Cogl creates during initialization. Copying a material is now basically just a case of slice allocating a CoglMaterial, setting the parent to be the source being copied and zeroing the mask of changes. Flush overrides should now be handled by simply relying on the cheapness of copying a material and making changes to it. (This will be done in a follow on commit) Weak material support will be added in a follow on commit.
2010-04-08 07:21:04 -04:00
/* Fragment processing programs */
CoglHandle current_program;
CoglPipelineProgramType current_fragment_program_type;
CoglPipelineProgramType current_vertex_program_type;
CoglMaterial: Implements sparse materials design This is a complete overhaul of the data structures used to manage CoglMaterial state. We have these requirements that were aiming to meet: (Note: the references to "renderlists" correspond to the effort to support scenegraph level shuffling of Clutter actor primitives so we can minimize GPU state changes) Sparse State: We wanted a design that allows sparse descriptions of state so it scales well as we make CoglMaterial responsible for more and more state. It needs to scale well in terms of memory usage and the cost of operations we need to apply to materials such as comparing, copying and flushing their state. I.e. we would rather have these things scale by the number of real changes a material represents not by how much overall state CoglMaterial becomes responsible for. Cheap Copies: As we add support for renderlists in Clutter we will need to be able to get an immutable handle for a given material's current state so that we can retain a record of a primitive with its associated material without worrying that changes to the original material will invalidate that record. No more flush override options: We want to get rid of the flush overrides mechanism we currently use to deal with texture fallbacks, wrap mode changes and to handle the use of highlevel CoglTextures that need to be resolved into lowlevel textures before flushing the material state. The flush options structure has been expanding in size and the structure is logged with every journal entry so it is not an approach that scales well at all. It also makes flushing material state that much more complex. Weak Materials: Again for renderlists we need a way to create materials derived from other materials but without the strict requirement that modifications to the original material wont affect the derived ("weak") material. The only requirement is that its possible to later check if the original material has been changed. A summary of the new design: A CoglMaterial now basically represents a diff against its parent. Each material has a single parent and a mask of state that it changes. Each group of state (such as the blending state) has an "authority" which is found by walking up from a given material through its ancestors checking the difference mask until a match for that group is found. There is only one root node to the graph of all materials, which is the default material first created when Cogl is being initialized. All the groups of state are divided into two types, such that infrequently changed state belongs in a separate "BigState" structure that is only allocated and attached to a material when necessary. CoglMaterialLayers are another sparse structure. Like CoglMaterials they represent a diff against their parent and all the layers are part of another graph with the "default_layer_0" layer being the root node that Cogl creates during initialization. Copying a material is now basically just a case of slice allocating a CoglMaterial, setting the parent to be the source being copied and zeroing the mask of changes. Flush overrides should now be handled by simply relying on the cheapness of copying a material and making changes to it. (This will be done in a follow on commit) Weak material support will be added in a follow on commit.
2010-04-08 07:21:04 -04:00
GLuint current_gl_program;
CoglBool current_gl_dither_enabled;
CoglColorMask current_gl_color_mask;
GLenum current_gl_draw_buffer;
/* Clipping */
/* TRUE if we have a valid clipping stack flushed. In that case
current_clip_stack will describe what the current state is. If
this is FALSE then the current clip stack is completely unknown
so it will need to be reflushed. In that case current_clip_stack
doesn't need to be a valid pointer. We can't just use NULL in
current_clip_stack to mark a dirty state because NULL is a valid
stack (meaning no clipping) */
CoglBool current_clip_stack_valid;
/* The clip state that was flushed. This isn't intended to be used
as a stack to push and pop new entries. Instead the current stack
that the user wants is part of the framebuffer state. This is
just used to record the flush state so we can avoid flushing the
same state multiple times. When the clip state is flushed this
will hold a reference */
CoglClipStack *current_clip_stack;
/* Whether the stencil buffer was used as part of the current clip
state. If TRUE then any further use of the stencil buffer (such
as for drawing paths) would need to be merged with the existing
stencil buffer */
CoglBool current_clip_stack_uses_stencil;
/* This is used as a temporary buffer to fill a CoglBuffer when
cogl_buffer_map fails and we only want to map to fill it with new
data */
GByteArray *buffer_map_fallback_array;
CoglBool buffer_map_fallback_in_use;
size_t buffer_map_fallback_offset;
CoglWinsysRectangleState rectangle_state;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 17:20:04 -04:00
CoglSamplerCache *sampler_cache;
/* FIXME: remove these when we remove the last xlib based clutter
* backend. they should be tracked as part of the renderer but e.g.
* the eglx backend doesn't yet have a corresponding Cogl winsys
* and so we wont have a renderer in that case. */
#ifdef COGL_HAS_XLIB_SUPPORT
int damage_base;
/* List of callback functions that will be given every Xlib event */
GSList *event_filters;
/* Current top of the XError trap state stack. The actual memory for
these is expected to be allocated on the stack by the caller */
CoglXlibTrapState *trap_state;
#endif
unsigned long winsys_features
[COGL_FLAGS_N_LONGS_FOR_SIZE (COGL_WINSYS_FEATURE_N_FEATURES)];
void *winsys;
/* Array of names of uniforms. These are used like quarks to give a
cogl-pipeline: Add support for setting uniform values This adds the following new public experimental functions to set uniform values on a CoglPipeline: void cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline, int uniform_location, float value); void cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline, int uniform_location, int value); void cogl_pipeline_set_uniform_float (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const float *value); void cogl_pipeline_set_uniform_int (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const int *value); void cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline, int uniform_location, int dimensions, int count, gboolean transpose, const float *value); These are similar to the old functions used to set uniforms on a CoglProgram. To get a value to pass in as the uniform_location there is also: int cogl_pipeline_get_uniform_location (CoglPipeline *pipeline, const char *uniform_name); Conceptually the uniform locations are tied to the pipeline so that whenever setting a value for a new pipeline the application is expected to call this function. However in practice the uniform locations are global to the CoglContext. The names are stored in a linked list where the position in the list is the uniform location. The global indices are used so that each pipeline can store a mask of which uniforms it overrides. That way it is quicker to detect which uniforms are different from the last pipeline that used the same CoglProgramState so it can avoid flushing uniforms that haven't changed. Currently the values are not actually compared which means that it will only avoid flushing a uniform if there is a common ancestor that sets the value (or if the same pipeline is being flushed again - in which case the pipeline and its common ancestor are the same thing). The uniform values are stored in the big state of the pipeline as a sparse linked list. A bitmask stores which values have been overridden and only overridden values are stored in the linked list. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-03 13:20:43 -04:00
unique number to each uniform name except that we ensure that
they increase sequentially so that we can use the id as an index
into a bitfield representing the uniforms that a pipeline
overrides from its parent. */
GPtrArray *uniform_names;
/* A hash table to quickly get an index given an existing name. The
name strings are owned by the uniform_names array. The values are
the uniform location cast to a pointer. */
GHashTable *uniform_name_hash;
cogl-pipeline: Add support for setting uniform values This adds the following new public experimental functions to set uniform values on a CoglPipeline: void cogl_pipeline_set_uniform_1f (CoglPipeline *pipeline, int uniform_location, float value); void cogl_pipeline_set_uniform_1i (CoglPipeline *pipeline, int uniform_location, int value); void cogl_pipeline_set_uniform_float (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const float *value); void cogl_pipeline_set_uniform_int (CoglPipeline *pipeline, int uniform_location, int n_components, int count, const int *value); void cogl_pipeline_set_uniform_matrix (CoglPipeline *pipeline, int uniform_location, int dimensions, int count, gboolean transpose, const float *value); These are similar to the old functions used to set uniforms on a CoglProgram. To get a value to pass in as the uniform_location there is also: int cogl_pipeline_get_uniform_location (CoglPipeline *pipeline, const char *uniform_name); Conceptually the uniform locations are tied to the pipeline so that whenever setting a value for a new pipeline the application is expected to call this function. However in practice the uniform locations are global to the CoglContext. The names are stored in a linked list where the position in the list is the uniform location. The global indices are used so that each pipeline can store a mask of which uniforms it overrides. That way it is quicker to detect which uniforms are different from the last pipeline that used the same CoglProgramState so it can avoid flushing uniforms that haven't changed. Currently the values are not actually compared which means that it will only avoid flushing a uniform if there is a common ancestor that sets the value (or if the same pipeline is being flushed again - in which case the pipeline and its common ancestor are the same thing). The uniform values are stored in the big state of the pipeline as a sparse linked list. A bitmask stores which values have been overridden and only overridden values are stored in the linked list. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-03 13:20:43 -04:00
int n_uniform_names;
CoglPollSource *fences_poll_source;
Use the Wayland embedded linked list implementation instead of BSD's This removes cogl-queue.h and adds a copy of Wayland's embedded list implementation. The advantage of the Wayland model is that it is much simpler and so it is easier to follow. It also doesn't require defining a typedef for every list type. The downside is that there is only one list type which is a doubly-linked list where the head has a pointer to both the beginning and the end. The BSD implementation has many more combinations some of which we were taking advantage of to reduce the size of critical structs where we didn't need a pointer to the end of the list. The corresponding changes to uses of cogl-queue.h are: • COGL_STAILQ_* was used for onscreen the list of events and dirty notifications. This makes the size of the CoglContext grow by one pointer. • COGL_TAILQ_* was used for fences. • COGL_LIST_* for CoglClosures. In this case the list head now has an extra pointer which means CoglOnscreen will grow by the size of three pointers, but this doesn't seem like a particularly important struct to optimise for size anyway. • COGL_LIST_* was used for the list of foreign GLES2 offscreens. • COGL_TAILQ_* was used for the list of sub stacks in a CoglMemoryStack. • COGL_LIST_* was used to track the list of layers that haven't had code generated yet while generating a fragment shader for a pipeline. • COGL_LIST_* was used to track the pipeline hierarchy in CoglNode. The last part is a bit more controversial because it increases the size of CoglPipeline and CoglPipelineLayer by one pointer in order to have the redundant tail pointer for the list head. Normally we try to be very careful about the size of the CoglPipeline struct. Because CoglPipeline is slice-allocated, this effectively ends up adding two pointers to the size because GSlice rounds up to the size of two pointers. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 13abf613b15f571ba1fcf6d2eb831ffc6fa31324) Conflicts: cogl/cogl-context-private.h cogl/cogl-context.c cogl/driver/gl/cogl-pipeline-fragend-glsl.c doc/reference/cogl-2.0-experimental/Makefile.am
2013-06-08 18:03:25 -04:00
CoglList fences;
/* This defines a list of function pointers that Cogl uses from
either GL or GLES. All functions are accessed indirectly through
these pointers rather than linking to them directly */
#ifndef APIENTRY
#define APIENTRY
#endif
#define COGL_EXT_BEGIN(name, \
min_gl_major, min_gl_minor, \
gles_availability, \
extension_suffixes, extension_names)
#define COGL_EXT_FUNCTION(ret, name, args) \
ret (APIENTRY * name) args;
#define COGL_EXT_END()
#include "gl-prototypes/cogl-all-functions.h"
#undef COGL_EXT_BEGIN
#undef COGL_EXT_FUNCTION
#undef COGL_EXT_END
};
CoglContext *
_cogl_context_get_default ();
const CoglWinsysVtable *
_cogl_context_get_winsys (CoglContext *context);
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
/* Query the GL extensions and lookup the corresponding function
* pointers. Theoretically the list of extensions can change for
* different GL contexts so it is the winsys backend's responsiblity
* to know when to re-query the GL extensions. The backend should also
* check whether the GL context is supported by Cogl. If not it should
* return FALSE and set @error */
CoglBool
_cogl_context_update_features (CoglContext *context,
Adds CoglError api Although we use GLib internally in Cogl we would rather not leak GLib api through Cogl's own api, except through explicitly namespaced cogl_glib_ / cogl_gtype_ feature apis. One of the benefits we see to not leaking GLib through Cogl's public API is that documentation for Cogl won't need to first introduce the Glib API to newcomers, thus hopefully lowering the barrier to learning Cogl. This patch provides a Cogl specific typedef for reporting runtime errors which by no coincidence matches the typedef for GError exactly. If Cogl is built with --enable-glib (default) then developers can even safely assume that a CoglError is a GError under the hood. This patch also enforces a consistent policy for when NULL is passed as an error argument and an error is thrown. In this case we log the error and abort the application, instead of silently ignoring it. In common cases where nothing has been implemented to handle a particular error and/or where applications are just printing the error and aborting themselves then this saves some typing. This also seems more consistent with language based exceptions which usually cause a program to abort if they are not explicitly caught (which passing a non-NULL error signifies in this case) Since this policy for NULL error pointers is stricter than the standard GError convention, there is a clear note in the documentation to warn developers that are used to using the GError api. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit b068d5ea09ab32c37e8c965fc8582c85d1b2db46) Note: Since we can't change the Cogl 1.x api the patch was changed to not rename _error_quark() functions to be _error_domain() functions and although it's a bit ugly, instead of providing our own CoglError type that's compatible with GError we simply #define CoglError to GError unless Cogl is built with glib disabled. Note: this patch does technically introduce an API break since it drops the cogl_error_get_type() symbol generated by glib-mkenum (Since the CoglError enum was replaced by a CoglSystemError enum) but for now we are assuming that this will not affect anyone currently using the Cogl API. If this does turn out to be a problem in practice then we would be able to fix this my manually copying an implementation of cogl_error_get_type() generated by glib-mkenum into a compatibility source file and we could also define the original COGL_ERROR_ enums for compatibility too. Note: another minor concern with cherry-picking this patch to the 1.14 branch is that an api scanner would be lead to believe that some APIs have changed, and for example the gobject-introspection parser which understands the semantics of GError will not understand the semantics of CoglError. We expect most people that have tried to use gobject-introspection with Cogl already understand though that it is not well suited to generating bindings of the Cogl api anyway and we aren't aware or anyone depending on such bindings for apis involving GErrors. (GnomeShell only makes very-very minimal use of Cogl via the gjs bindings for the cogl_rectangle and cogl_color apis.) The main reason we have cherry-picked this patch to the 1.14 branch even given the above concerns is that without it it would become very awkward for us to cherry-pick other beneficial patches from master.
2012-08-31 14:28:27 -04:00
CoglError **error);
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 15:44:56 -04:00
/* Obtains the context and returns retval if NULL */
#define _COGL_GET_CONTEXT(ctxvar, retval) \
CoglContext *ctxvar = _cogl_context_get_default (); \
if (ctxvar == NULL) return retval;
#define NO_RETVAL
Flush matrices in the progend and flip with a vector Previously flushing the matrices was performed as part of the framebuffer state. When on GLES2 this matrix flushing is actually diverted so that it only keeps a reference to the intended matrix stack. This is necessary because on GLES2 there are no builtin uniforms so it can't actually flush the matrices until the program for the pipeline is generated. When the matrices are flushed it would store the age of modifications on the matrix stack so that it could detect when the matrix hasn't changed and avoid flushing it. This patch changes it so that the pipeline is responsible for flushing the matrices even when we are using the GL builtins. The same mechanism for detecting unmodified matrix stacks is used in all cases. There is a new CoglMatrixStackCache type which is used to store a reference to the intended matrix stack along with its last flushed age. There are now two of these attached to the CoglContext to track the flushed state for the global matrix builtins and also two for each glsl progend program state to track the flushed state for a program. The framebuffer matrix flush now just updates the intended matrix stacks without actually trying to flush. When a vertex snippet is attached to the pipeline, the GLSL vertend will now avoid using the projection matrix to flip the rendering. This is necessary because any vertex snippet may cause the projection matrix not to be used. Instead the flip is done as a forced final step by multiplying cogl_position_out by a vec4 uniform. This uniform is updated as part of the progend pre_paint depending on whether the framebuffer is offscreen or not. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-29 09:21:07 -05:00
void
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
_cogl_context_set_current_projection_entry (CoglContext *context,
CoglMatrixEntry *entry);
Flush matrices in the progend and flip with a vector Previously flushing the matrices was performed as part of the framebuffer state. When on GLES2 this matrix flushing is actually diverted so that it only keeps a reference to the intended matrix stack. This is necessary because on GLES2 there are no builtin uniforms so it can't actually flush the matrices until the program for the pipeline is generated. When the matrices are flushed it would store the age of modifications on the matrix stack so that it could detect when the matrix hasn't changed and avoid flushing it. This patch changes it so that the pipeline is responsible for flushing the matrices even when we are using the GL builtins. The same mechanism for detecting unmodified matrix stacks is used in all cases. There is a new CoglMatrixStackCache type which is used to store a reference to the intended matrix stack along with its last flushed age. There are now two of these attached to the CoglContext to track the flushed state for the global matrix builtins and also two for each glsl progend program state to track the flushed state for a program. The framebuffer matrix flush now just updates the intended matrix stacks without actually trying to flush. When a vertex snippet is attached to the pipeline, the GLSL vertend will now avoid using the projection matrix to flip the rendering. This is necessary because any vertex snippet may cause the projection matrix not to be used. Instead the flip is done as a forced final step by multiplying cogl_position_out by a vec4 uniform. This uniform is updated as part of the progend pre_paint depending on whether the framebuffer is offscreen or not. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-29 09:21:07 -05:00
void
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 10:59:48 -05:00
_cogl_context_set_current_modelview_entry (CoglContext *context,
CoglMatrixEntry *entry);
Flush matrices in the progend and flip with a vector Previously flushing the matrices was performed as part of the framebuffer state. When on GLES2 this matrix flushing is actually diverted so that it only keeps a reference to the intended matrix stack. This is necessary because on GLES2 there are no builtin uniforms so it can't actually flush the matrices until the program for the pipeline is generated. When the matrices are flushed it would store the age of modifications on the matrix stack so that it could detect when the matrix hasn't changed and avoid flushing it. This patch changes it so that the pipeline is responsible for flushing the matrices even when we are using the GL builtins. The same mechanism for detecting unmodified matrix stacks is used in all cases. There is a new CoglMatrixStackCache type which is used to store a reference to the intended matrix stack along with its last flushed age. There are now two of these attached to the CoglContext to track the flushed state for the global matrix builtins and also two for each glsl progend program state to track the flushed state for a program. The framebuffer matrix flush now just updates the intended matrix stacks without actually trying to flush. When a vertex snippet is attached to the pipeline, the GLSL vertend will now avoid using the projection matrix to flip the rendering. This is necessary because any vertex snippet may cause the projection matrix not to be used. Instead the flip is done as a forced final step by multiplying cogl_position_out by a vec4 uniform. This uniform is updated as part of the progend pre_paint depending on whether the framebuffer is offscreen or not. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2011-11-29 09:21:07 -05:00
Add a GL 3 driver This adds a new CoglDriver for GL 3 called COGL_DRIVER_GL3. When requested, the GLX, EGL and SDL2 winsyss will set the necessary attributes to request a forward-compatible core profile 3.1 context. That means it will have no deprecated features. To simplify the explosion of checks for specific combinations of context->driver, many of these conditionals have now been replaced with private feature flags that are checked instead. The GL and GLES drivers now initialise these private feature flags depending on which driver is used. The fixed function backends now explicitly check whether the fixed function private feature is available which means the GL3 driver will fall back to always using the GLSL progend. Since Rob's latest patches the GLSL progend no longer uses any fixed function API anyway so it should just work. The driver is currently lower priority than COGL_DRIVER_GL so it will not be used unless it is specificly requested. We may want to change this priority at some point because apparently Mesa can make some memory savings if a core profile context is used. In GL 3, getting the combined extensions string with glGetString is deprecated so this patch changes it to use glGetStringi to build up an array of extensions instead. _cogl_context_get_gl_extensions now returns this array instead of trying to return a const string. The caller is expected to free the array. Some issues with this patch: • GL 3 does not support GL_ALPHA format textures. We should probably make this a feature flag or something. Cogl uses this to render text which currently just throws a GL error and breaks so it's pretty important to do something about this before considering the GL3 driver to be stable. • GL 3 doesn't support client side vertex buffers. This probably doesn't matter because CoglBuffer won't normally use malloc'd buffers if VBOs are available, but it might but worth making malloc'd buffers a private feature and forcing it not to use them. • GL 3 doesn't support the default vertex array object. This patch just makes it create and bind a single non-default vertex array object which gets used just like the normal default object. Ideally it would be good to use vertex array objects properly and attach them to a CoglPrimitive to cache the state. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 66c9db993595b3a22e63f4c201ea468bc9b88cb6)
2012-09-26 15:32:36 -04:00
/*
* _cogl_context_get_gl_extensions:
* @context: A CoglContext
*
* Return value: a NULL-terminated array of strings representing the
* supported extensions by the current driver. This array is owned
* by the caller and should be freed with g_strfreev().
*/
char **
_cogl_context_get_gl_extensions (CoglContext *context);
const char *
_cogl_context_get_gl_version (CoglContext *context);
#endif /* __COGL_CONTEXT_PRIVATE_H */