Previously, when toggling a switch on we tried to replicate NM policy and
find a good connection to activate. This is broken in many situations.
Instead, only activate something when we can be sure it's what the user
wants (i.e. when there is only one connection, or when there is none,
and thus connecting will trigger the config dialog)
https://bugzilla.gnome.org/show_bug.cgi?id=683136
In multi-monitor setups, the screen might extend below the edge of
the monitor that holds the tray. In that case the tray is currently
triggered from a secondary monitor, which is rather surprising;
change the check to use the correct monitor geometry instead.
https://bugzilla.gnome.org/show_bug.cgi?id=683044
PopupMenuBase relies on open-state-changed to update the separator
visibility, but PopupMenuSection were only emitting when the parent
closed, so the first time the menu was opened, separator visiblity was
wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=682998
The design has a combined volume-network-power indicator in the lock
screen, which when opened shows a volume slider. Implement it by abstracting
the volume menu into a PopupMenuSection, and by creating three StIcons
bound to the real ones.
https://bugzilla.gnome.org/show_bug.cgi?id=682540
The height of an unexpanded notification could include expanded
content if the notification has extra widgets (like actions and images),
so tweening to that cause it to expand visually.
Instead, use the height of the message tray before the restyle
as an upper bound.
https://bugzilla.gnome.org/show_bug.cgi?id=682738
Commit 22eea750 made info messages show up in the lock screen, but
as setShowWhenLocked() throws an exception when called on non-transient
notifications, the transient hint has to be set first.
https://bugzilla.gnome.org/show_bug.cgi?id=682268
Bumping overrides any animation, and causes the installed onComplete
not to run, which in turn breaks suspending from the user menu (as
it listens to lock-screen-shown).
Add a state variable (using an enumeration shared with messageTray)
to control the lock screen, and only bump when the lock is still.
https://bugzilla.gnome.org/show_bug.cgi?id=682746
Showing the removable devices is potentially a security risk (as
they include network shares). Also, a nautilus launched from there
can't be used, so it's just a way to overload the system.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
This makes the workspace indicator respect the "padding" style attribute.
Also, since we no longer draw the border on top of the thumbnail,
we need to be pixel-precise in allocating the indicator height.
We use this to make the workspace selector more similar to the mockup.
https://bugzilla.gnome.org/show_bug.cgi?id=662087
If the user has the mouse down - for example when they are selecting
text and dragging - then the attempt to get a modal grab will fail.
grabHelper: allow the .grab() function to fail and do nothing in this
modal case if the grab fails.
messageTray: handle grab failure and don't pop up the tray. Change the
logic for tray dwelling so that we only try to pop up the tray once
while the pointer is in the dwell area - this avoids the possiility
that the tray will pop up once the user releases the mouse.
https://bugzilla.gnome.org/show_bug.cgi?id=682385
Currently we load all search providers from XDG_DATA_DIRS, so if
the same provider is installed several times in different directories,
we happily show duplicate results. To fix, keep track of all remote
providers we add and skip those that already have been loaded from a
different directory.
https://bugzilla.gnome.org/show_bug.cgi?id=682470
The app menu is hidden when entering the lock screen, however it
might be shown again while the lock is still in place - we don't
want this ever to be the case, so make show() a no-op while the
screen is locked.
https://bugzilla.gnome.org/show_bug.cgi?id=682475
AutorunManager relied on AutomountManager to find if the session
was active, and this broke when this stopped exporting a public
method for it. Fix AutorunManager to have its own reference to
the LoginManager.
https://bugzilla.gnome.org/show_bug.cgi?id=682455
Currently we animate scrolling to the active workspace both when
the number of workspaces changed and after changing the active
workspace. So in case we don't actually change workspace, this
results in an unnecessary animation that may even have unwanted
side effects: when done during the overview transition (e.g. in
the case of opening and activating a window on an empty workspace),
non-active workspaces become visible during the transition.
To fix, don't scroll to the active workspace when the number of
workspaces changes and rely on the 'switch-workspace' signal being
emitted as necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=682002
Since dwell at the bottom of the screen is now the primary way of
summoning the tray, removing the hot corner to avoid having two
separate things that can be accidentally triggered.
https://bugzilla.gnome.org/show_bug.cgi?id=682310
Don't log a warning if an unrecognized device type is seen.
Don't show slave connections in the menu. (Eg, don't show the
individual wired connections making up a bond, since they can't be
used individually.)
Make the icon only reflect the status of connections that are visible
in the menu. (ie, don't show the "connecting" icon when an
unrecognized connection type is connecting, and don't show a
"connected" status if the only active connections are of unrecognized
types.)
https://bugzilla.gnome.org/show_bug.cgi?id=682364
The fingerprint message is useful for users that click their
names in the user list to let them know if fingerprint login
is available.
This same place on screen (below the login entry) can potentially
be used for other messages as well.
This commit changes the variable and style names surrounding
this feature to be more generic.
A subsequent commit will leverage this functionality to provide
a hint on how to log in to the local enterprise domain controller
(if relevant).
https://bugzilla.gnome.org/show_bug.cgi?id=681975
If the user leaves the mouse pointer at the bottom of the screen for a second,
open the tray. This simulates the eventual plan of measuring "pressure" by how
far the pointer is moved past the edge of the screen. Measuring pressure will
take X server changes.
https://bugzilla.gnome.org/show_bug.cgi?id=682310
Right now, when entering the overview, we compute the window slots about
four or five times, from scratch each time. Move to a queued system where
extraneous calls to positionWindows don't matter.
https://bugzilla.gnome.org/show_bug.cgi?id=582650
Setting an IM presence only makes sense when connected to the
network, reflect this by making the presence chooser insensitive
when no network is available.
https://bugzilla.gnome.org/show_bug.cgi?id=677982
Trying to connect to IM servers while offline is pointless, in
particular now that we added a progress indication which makes
the connection attempt very visible.
To fix, wait for the network to become available until restoring
a previous IM presence.
https://bugzilla.gnome.org/show_bug.cgi?id=677982
The original code was assuming that getDay() on a Sunday would
return 7 rather than 0. This broke the "Next Week" logic
in several places.
This commit introduces a dayInWeek variable which takes the following
values on the according days:
weekstart = 1:
Mo: 0
Tu: 1
We: 2
Th: 3
Fr: 4
Sa: 5
Su: 6
weekstart = 0:
Su: 0
Mo: 1
Tu: 2
We: 3
Th: 4
Fr: 5
Sa: 6
Using this we can simplify and fix the conditional that decides
whether to show "This week" or "Next week" which was broken on
Sundays.
This commit also fixes the period that gets shown for "Next week"
on Sundays. Due to the bug it was 13 + 1 - 0 or 13 + 0 - 0 on
Sundays:
weekStart = 1:
saturday: saturday + 13 - day_in_week = saturday + 8 = sunday next week
sunday: sunday + 13 - day_in_week = sunday + 7 = sunday next week
weekStart = 0:
friday: friday + 13 - day_in_week = friday + 8 = saturday next week
saturday: saturday + 13 - day_in_week = friday + 7 = saturday next week
https://bugzilla.gnome.org/show_bug.cgi?id=682198
With the latest changes to the overview, the application view is now
clearly on a different level compared to the window picker. For that
reason it now makes sense to close it on Escape rather than hiding
the overview directly, as we do for search.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
Rather than relying on implementation details of StWidget's keyboard
navigation to "hide" the focusTrap from arrow key navigation, implement
the desired behavior explicitly in a custom widget.
https://bugzilla.gnome.org/show_bug.cgi?id=663901
Tabs used to provide an abstraction for a page and the control used to
activate it. As the latter has now been replaced with external controls
handled directly in the viewSelector, the abstraction itself doesn't make
much sense anymore. In preparation of replacing it, move the search
handling provided by the SearchTab directly in the viewSelector.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
We pass the dash’s showApps button to the viewSelector, and we connect it
to the showing and hiding of the appsView. This is necessary because there
are different mechanisms for switching the views, and it has to stay in
sync with the button’s state.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
In the new designs, we no longer need favRemoveTarget. As it shares a lot
of its functionality with the new showAppsIcon, we refactor and restyle it
accordingly.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
We’ll be repurposing the favRemoveTarget, which calls for it the be
permanently visibe. The favRemoveTarget used to be added to the dash when
needed and removed again when it wasn’t. This made that it always appeared
at the bottom of the dash. Now that we always show it, we also need to
explicitly define it to be at the bottom of the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
The entry should be positioned in the center of the overview. This makes
that its position can’t be set in the viewSelector without making things
overly complicated. Therefore we move the entry to the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
Design calls for views being accessible by other means than the current tab
system, so we have no longer a need for the public viewTab API. Move the
initialization of tabs to the viewSelector and make
viewSelector.addViewTab() private.
https://bugzilla.gnome.org/show_bug.cgi?id=682109
The original design for the overview had buttons for searching for
Wikipedia and Google, but in practice this is a bad idea. The buttons
are the default activations, meaning that using the overview as a
fluent motion of launching something - "firefxo<Enter>", will launch
Google/Wikipedia.
https://bugzilla.gnome.org/show_bug.cgi?id=670168
This code was originally here to close the summary box pointer if it was
already open, but it seems that it isn't necessary, and is causing all
sorts of problems.
Displaying a close button provides a discoverable way to close notifications.
Clicking the close button on new notifications, dismisses them, but doesn't
remove the notification source from the message tray if it is resident.
Clicking the close button on summary notifications acts the same way as clicking
"Remove" option in the right click menu, which is to remove the notification
stack and its source, even if it is resident or a tray icon.
When we enter the overview, we don't explicitly don't take a grab, so we
shouldn't connect to key-focus-changed and things like that, otherwise
random overview code will drop our grab for us.
This fixes escape in the overview not dropping when a notification is up.
Make sure to account for modalCount properly, rather than just
tracking modalCount for the last actor on the stack. Additionally,
traverse the popped actors in the reverse order so that onUngrabbed
callbacks are called at the proper place in time.
If the user is already active when the notification pops up, we
won't get an idle watcher because there's no transition from
active to idle or vice versa. Correct this by initializing the
state correctly from XSync.
StScrollBar was intercepting motion events by using captured-event on
the stage, which required additional dirty tricks, which required
additional hacks. Simplify it by just using clutter_grab_pointer()
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=671001
The designers would like the message-tray to use different styles
depending on whether it is shown in the overview or not, so use
an :overview pseudo class as the top bar.
1) straddling windows get clipped at the monitor boundary
2) we move the bottom monitor and not the primary because that is
where the tray is
3) to stop the wallpaper from the bottom monitor leaking into the
primary, we adjust the clip as the clone animates up/down
https://bugzilla.gnome.org/show_bug.cgi?id=681392
The unlock dialog has a mechanism for manually typing in a username
and password. This mechanism is mislabeled:
Login as another user
when it should be labeled
Log in as another user
This commit adds the space.
Spotted by Stef Walter <stefw@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=681750
Various code around had different paths for ConsoleKit and
logind. Consolidate it by making an abstract class that all
callers can use, which hides the implementation details of the
two daemons.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
Instead of manually tracking source icon changes, or requiring a manual
call to _setSummaryIcon, add a way to emit a signal when we're guaranteed
the icon has been changed, and then the source actor will automatically
update the icon.
_setSummaryIcon is still available for sources such as the notification
daemon, that require special treatment for the summary icon (to be used
with tray icons)
https://bugzilla.gnome.org/show_bug.cgi?id=680426
In preparation for accessing it in the screenshield, factor out
common code for ConsoleKit and Systemd.
Also, clean up ConsoleKit manager, as the daemon is required in
a non systemd installation. In particular:
- We allow it to be autostarted at session startup (or really,
we expect it to be already there, started by GDM during session
opening).
- We no longer silently assume that the session is active if
it can't start.
https://bugzilla.gnome.org/show_bug.cgi?id=682096
In some cases can_focus value is taken directly as
!reactive. But this is not the case anymore, as
we are interested on navigate on non reactive items
https://bugzilla.gnome.org/show_bug.cgi?id=667439
We need to make sure the Source is fully constructed before creating
mainIcon, as SourceActor will query the count of the source.
This fixes Telepathy Chats.
https://bugzilla.gnome.org/show_bug.cgi?id=682045
Now that GDM no longer emits auth failures after 25 seconds, we
need to handle inactivity ourselves.
This has also the advantage that it tracks real inactivity, rather
than a timeout from a fixed point in time.
https://bugzilla.gnome.org/show_bug.cgi?id=682041
It doesn't make sense to have multiple ShellIdleMonitors, since
each has its own GDK filter function, but they all get the same
events. In preparation for having it accessed from other places
than the message tray, make it a singleton.
https://bugzilla.gnome.org/show_bug.cgi?id=682041
When pressing a key different from escape (one thus that has no
effect), bump the screen up, to indicate that it eats keyboard
input and it must be lifted up.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
This is a temporary patch. The user menu button needs to move to
the left, and the a11y menu in some cases needs to be hidden outside
of the screen lock too.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
Use the new monitor constraint to place the clock and notification
box on the primary monitor only. The background is still extended
to the whole screen.
Get rid of the LockDialogGroup hack, now that ClutterBinLayout
respects fixed position correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=681743
This commit makes ModalDialog use the new MonitorConstraint instead
of custom code to force itself on the right monitor.
At the same it ports wanda, which has something similar to a modal
dialog, but is not using the ModalDialog module.
https://bugzilla.gnome.org/show_bug.cgi?id=681743
Instead of connecting manually to LayoutManager, or using ShellGenericContainer,
make a ClutterConstraint subclass that can track automatically
a specific monitor index, or the primary monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=681743
The fade animation we started using after centering attached
modal dialogs didn't work too well. So after going back to the
scale animation, adjust it to scale from the center rather
than the top, which works quite well.
https://bugzilla.gnome.org/show_bug.cgi?id=681601
The combination of desaturating and lowering the brightness does
not work too well in all cases, in particular for applications
using the dark theme variant. Dropping the desaturation effect and
making the brightness adjustment more profound gives a better
result.
https://bugzilla.gnome.org/show_bug.cgi?id=681601
Use the new OVERLAY_KEY keybinding action instead of special-casing
the overlay-key to make sure the same key will be used in- and outside
the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=665547
If automatic lock is disabled in the control center, only lock
when explicitly using the Lock menu item, and not for Suspend or
Switch user/session.
https://bugzilla.gnome.org/show_bug.cgi?id=680231
Rework the count system in Source, to distinguish between the
normal notification count and the count of unseen/unacknowledged
notification. (A notification is considered unacknowledged until
shown, as a banner or inside the summary box pointer).
Includes some code cleanups and a test for multiple notifications
in the same source.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
If a source is associated with an app, ignore the app name provided
by libnotify, as that is often garbage.
This fixes the "XChat-GNOME OSD" problem.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
Reduce padding around persistent sources, and ensure that spacing
around resident notifications is only applied once.
Also, add some padding to the clock.
https://bugzilla.gnome.org/show_bug.cgi?id=681143
As description of the setting says, color-saturation ranges from
0.0 (grayscale) to 1.0 (full color), but the real outcome was the
opposite. The reason is that clutter provides a desaturation effect,
and color-saturation was passed directly to that effect. This patch
renames the effect and compute the desaturation value.
GetUserVerifier can only be called from the greeter session,
and fails with AccessDenied in all other cases. Also, calling it
hides the real error from OpenReauthenticationChannel, which
instead should be logged.
https://bugzilla.gnome.org/show_bug.cgi?id=680750
gnome-session and gnome-settings-daemon rely on the screensaver
interface to know the locked state. Since gnome-screensaver is no
longer running, it's up to gnome-shell to provide it.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
When the screen shield is activated from the user menu, animate
it instead of showing it abruptly. Also, ensure that the animation
had time to finish before calling UPower to suspend, to avoid
showing it when resuming.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Track screen lock status in the message tray, and filter banner
notifications. The message tray is completely hidden when the screen is
locked, but exceptions can be made for individual transient notifications,
such as shell messages and the on screen keyboard.
Non transient sources are shown in the middle of the lock screen. Resident
notifications (such as those from Rhythmbox) are shown in full, while
persistent ones are displayed as icon and message count.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Track locked status and use it to provide a reduced version of
the panel in the locked screen. Accessibility, input sources and
volume menus are preserved, without the link to the control center.
Network, battery and user menu are reduced to pure indicators,
with no menu.
This is similar to the design but not exactly, because designers
in IRC said that network needs more analysis before exposing, and
because the design didn't account for a11y and IM (so the one menu
metaphor is not really appropriate).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
The design calls for the curtain to appear in the gdm greeter too.
Implement this by having the screenshield manage the login dialog
(delegating its creation to SessionMode).
https://bugzilla.gnome.org/show_bug.cgi?id=619955
This separates the screen shield into two main screens. One is
the lock screen, and it is shown when coming back from idle status
and when failing authentication. The other is the actual unlock
dialog.
Moving from the first to the second is possible by pressing Escape
or by dragging an arrow on the bottom on the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
This ensures that the screen shield is created at the right
stacking level, so the message tray is visible in the lock screen
(showing PAM messages, critical notifications and the on screen
keyboard)
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Ensure that the lightbox is above everything (including the screenlock
itself) when fading in - this allows for fading while showing the
unlock dialog. Also, don't pushModal again when already locked, or
we won't get out of it.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
When the screenshield is deactivated, instead of going back to the
session immediately, prompt the user for authentication.
This essentially reinstates what used to be provided by gnome-screensaver.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
We are replacing the gnome-screensaver module with with a screen shield
that is part of gnome-shell.
This patch fades out the screen on idle and shows a shield with a background
image when there is activity again. The shield can be removed with a key or
button press.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Add 'default' parameter to setButtons, that controls the binding
of Return (unless overridden) and applies the 'default' pseudo-class.
Currently it has no effect, but it will start having after the
login dialog redesign.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
To allow more than one summary icon actor for a source we split
the model of the source icon (which is iconName, if the default
implementation is used, or a GIcon otherwise) and replace
createNotificationIcon() with a generic createIcon(size). Also,
the actual source actor is split into a separate class, that handles
the notification counter automatically.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
The :reactive property is used on StButton to like the :sensitive
property on GtkWidgets, that is, to indicate that the user is not
(yet) expected to click the button, and therefore should affect
styling too.
This allows to remove some code at the JS layer.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Previous code would access the array element before checking that
the index was within bounds, and therefore cause a TypeError.
It wasn't noticed earlier because at least one visible children
is in each panel box in all session modes.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Destroyed modal actors should be completely removed from the modal
stack automatically, including leaving modality if needed.
This allows for destroying modal dialogs without calling close().
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Change visibleInFullscreen to be trackFullscreen. If true, visibility
is fully bound to fullscreen status, if false, no change is made.
This allows to avoid set_skip_paint(), while not messing with
visibility of actors that are sometimes hidden for other reasons.
The flag was reversed because only the panel uses it, so false is
a more useful default.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
Make it possible to control the visibility of "Show/hide text" item
at runtime, to reuse the same entry for both password and non-password
prompts.
https://bugzilla.gnome.org/show_bug.cgi?id=619955
When GDM was moved over to GDBus it dropped the libgdmgreeter
library and introduced a new libgdm library with a somewhat
different API.
The main differences in the API are:
1) open_connection is now implicit and automatic
2) conversations don't need to be started explicitly, they're
started just-in-time when verification is requested
3) The functions are split up between the client, and new
helper objects that correspond to the dbus interfaces
they were generated from (one for user verification,
one for greeter specific operations, and a couple more
that aren't used by gnome-shell).
4) libgdm supports reauthenticating in an already running
session, so user switching should now affect the users
session more like screen unlocking does.
This commit moves the shell over to the new library.
Based on work by Giovanni Campagna <gcampagna@src.gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=676401
As part of wanting to reuse some of the looking glass components,
don't use Main.lookingGlass, but instead pass the parent around.
Don't adjust the evaluator just yet, though. We'll split it into
a separate class soon.
https://bugzilla.gnome.org/show_bug.cgi?id=679944
This makes sense, since we are covering input methods and keyboard
layouts in the same keyboard menu. The effect of this change is that
the ibus status icon no longer appears in the system status area.
Changing the number of workspaces while the popup was visible (which
happens when moving windows on the last non empty workspace) resulted
in a wrong layout. Fix that, by listening to workspace-added and
workspace-removed signals, and by always requesting an updated size
from the actor.
https://bugzilla.gnome.org/show_bug.cgi?id=679005
We connect to the IBus daemon asyncronously and use it to query info
about input sources of the type 'ibus'. In case the daemon is or
becomes unreachable we just skip showing input sources of this type.
https://bugzilla.gnome.org/show_bug.cgi?id=641531
The calendar grid is build by giving each element right and bottom
borders, all top-most elements a top border, and all left-most
elements a left border. However in RTL locales, we currently add
the left border to the *right-most* elements, resulting in the grid
appearing clipped on the left side.
https://bugzilla.gnome.org/show_bug.cgi?id=679879
While modal dialogs were attached to the parent's titlebar, it
made sense to leave the top of the parent window at full color.
With the new position of modal dialogs, it makes more sense to dim
the entire parent window, so we can use a combination of Clutter's
BrightnessContrast- and DesaturateEffect instead of our own custom
shader.
https://bugzilla.gnome.org/show_bug.cgi?id=674499
With modal dialogs no longer being attached to their parents'
titlebar, the current animation no longer works too well. Use
a simple fade animation instead.
https://bugzilla.gnome.org/show_bug.cgi?id=674499
Show a notification when we receive a show-unmount-progress signal on
the mount operation we use for unmounting.
The notification will either turn fade out automatically with a
completion message when the unmount successfully completes, or will
disappear in case the operation is aborted underway (for example because
the device has been unplugged in the meantime).
https://bugzilla.gnome.org/show_bug.cgi?id=676125
When activating the app menu while displaying a startup notification
animation, the application shown in the menu does not match the
application providing the menu. To avoid this case, make the menu
button unreactive while playing the animation.
https://bugzilla.gnome.org/show_bug.cgi?id=672322
This is a bare-bones copy/replace. It does not implement ChangeLog
support. If we cannot get System Updates integration, I will implement
notification support.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When PackageKit signals that it prepared an update, offer an option
to reboot and apply it, using a helper that will setup the next
reboot and then calling to gnome-session.
https://bugzilla.gnome.org/show_bug.cgi?id=677394
This commit adds a grayscale effect to the magnifier, similar to
the lightness, brightness and contrast effects that are already there.
The effect is configured with the
org.gnome.desktop.a11y.magnifier.color-saturation setting, which
can take values from 0.0 (grayscale) to 1.0 (full color).
Based on a patch by Matthias Clasen <mclasen@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=676782
When connecting to virtual machines with usb-device redirection, such as Spice
enabled vms, automount may get in the way. Specifically if auto-usbredir is
enabled in the vm-viewer, then the usbredir code and the automount code race
for who gets to the device first.
If the automount code wins the race this is a problem, since usbredir causes a
device-disconnect (iow the usb mass storage driver sees an unplug), so in the
end usbredir always wins, and we end up with a non clean potentially corrupt
filesystem. Also see:
https://bugzilla.redhat.com/show_bug.cgi?id=812972
There for the need exists to be able to inhibit gnome-shell's automounting,
since all other inhibits run through gnome-session, I've chosen to do the same
for the automount-inhibiting. I've also submitted a patch to gnome-session to
reserve flag value 16 for this, see bug 678595.
This patch adds support to gnome-shell to honor this new inhibit flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=678597
The log messages about presence changes unnecessarily cluttered the
notification.
Instead, we now present the presence states (online, offline, away, busy)
with an icon placed right next to the avatar. We also no longer show
notifications on presence changes.
https://bugzilla.gnome.org/show_bug.cgi?id=669508
When selecting "Open Calendar" in the date menu, the configured
application is launched via command line, so we don't get any
startup notification. If Evolution is used as calendar application,
launch it via the .desktop file added by the last commit instead in
order to fix the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=677907
By disconnecting the 'notify::connection-status' signal as soon as the account
is disabled, we were missing the signal telling us when the status was moving
from CONNECTING/CONNECTED to DISCONNECTED and so the status icon was never
updated.
What we really want is to disconnect the signal when the account is removed
from the account manager as we don't care about it any more.
https://bugzilla.gnome.org/show_bug.cgi?id=669112
Use our native JS error system in the "extension system" API, only
using the signal/log-based error reporting at the last mile. Additionally,
delete the directory if loading the extension failed, and report the error
back over DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
Instead of using the 'extension-state-changed' signal to relay errors,
use DBus's native error mechanism to inform the method caller that the
call has failed. This requires making the method actually asynchronous
so that we don't block the browser, which is stuck waiting for a reply
from the browser plugin. To ensure this, we need to modify the browser
plugin API to ensure its extesion installation method is asynchronous.
Additionally, this lets us remove the awful, broken hacks that we used
when a user clicked the "Cancel" button, replacing it by a DBus return
value.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
When the extension downloader was originally designed, the information
downloading part was inserted at the last minute, along with the modal
dialog as a security feature to make sure an extension didn't silently
get installed on the user's machines either due to a security issue in
the browser-plugin, or an XSS issue on the extensions website. Correct
the mistake I made when writing the code; instead of dropping an error
on the floor, log it correctly. This "bug" has already bitten a number
of users who forgot to configure proxy settings in the control center.
https://bugzilla.gnome.org/show_bug.cgi?id=679099
Pam seems to give us different strings, sometimes 'Password:',
sometimes 'Password: '. Look for both of these when replacing
them with a translated prompt.
https://bugzilla.gnome.org/show_bug.cgi?id=675300
The current position below "System Settings" is problematic - the
items are unrelated, and misclicks will result in a scary system
modal dialog that has to be cancelled.
Move items around a bit to avoid this problem.
https://bugzilla.gnome.org/show_bug.cgi?id=678887
