Adds glFrustum wrappers (GLES only accepts floats not doubles, and GLES2
needs to use our internal cogl_wrap_glFrustumf)
Adds GL_TEXTURE_MATRIX getter code in cogl_wrap_glGetFloatv
Adds a GL_TEXTURE_MATRIX define for GLES2
Its not intended that users should use these with any other matrix mode, and
internally we now have the _cogl_current_matrix API if we need to play with
other modes.
If we later add internal flags to CoglMatrix then this code wouldn't
initialize those flags. The ways it's now done adds a redundant copy, but
if that turns out to be something worth optimizing we can look again at
using a cast but adding another way for initializing internal flags.
This is useful because sometimes we need to get the current matrix, which
is too expensive when indirect rendering.
In addition, this virtualization makes it easier to clean up the API in
the future.
The type machinery for CoglFixed should be implemented by COGL
itself, now that COGL exports the GType of its types.
This allows moving most of what ClutterFixed did directly to
CoglFixed where it belongs.
The CoglPango code falls under the COGL "jurisdiction"; this means
that it cannot include Clutter headers unless strictly necessary.
The CoglPangoRenderer code was using the CLUTTER_NOTE() macro. Now
that COGL has it's own COGL_NOTE() similar macro, CoglPango should
use that and avoid including clutter-debug.h (which pulls in
clutter-private.h which in turn pulls in clutter-actor.h).
A new flag, COGL_DEBUG_PANGO, has been added to the COGL debug
flags.
In the future if we want to annotate matrices with internal flags, and add
caching of the inverse matrix then we need to ensure that all matrix
modifications are done by cogl_matrix API so we'd know when to dirty the
cache or update the flags.
This just adds documentation to that effect, and assuming the most likley
case where someone would try and directly write to matrix members would
probably be to load a constant matrix other than the identity matrix; I
renamed cogl_matrix_init_from_gl_matrix to cogl_matrix_init_from_array to
make it seem more general purpose.
Bug 1473 - CoglPixelFormat enum data must be declared static
When registering an enumeration GType, the GEnumValue or GFlagsValue
arrays must be declared static; otherwise, you get a segmentation
fault when calling the function again.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Clutter is able to show debug messages written using the CLUTTER_NOTE()
macro at runtime, either by using an environment variable:
CLUTTER_DEBUG=...
or by using a command line switch:
--clutter-debug=...
--clutter-no-debug=...
Both are parsed during the initialization process by using the
GOption API.
COGL would benefit from having the same support.
In order to do this, we need a cogl_get_option_group() function in
COGL that sets up a GOptionGroup for COGL and adds a pre-parse hook
that will check the COGL_DEBUG environment variable. The OptionGroup
will also install two command line switches:
--cogl-debug
--cogl-no-debug
With the same semantics of the Clutter ones.
During Clutter initialization, the COGL option group will be attached
to the GOptionContext used to parse the command line options passed
to a Clutter application.
Every debug message written using:
COGL_NOTE (SECTION, "message format", arguments);
Will then be printed only if SECTION was enabled at runtime.
This whole machinery, like the equivalent one in Clutter, depends on
a compile time switch, COGL_ENABLE_DEBUG, which is enabled at the same
time as CLUTTER_ENABLE_DEBUG. Having two different symbols allows
greater granularity.
An assert to verify there was no error when generating a buffer object
for the vertex buffer API was being hit when running the GLES1 conformance
tests.
Bug #1457 - Creating a new texture messes up the cogl material state
cache; reported by Neil Roberts
We still don't have caching of bound texture state so we always have to
re-bind the texture when flushing the GL state of any material layers.
Bug #1460 - Handling of flags in cogl_material_set_color
Cogl automatically enables/disables blending based on whether the source color
has an alhpa < 1.0, or if any textures with an alpha component are in use, but
it wasn't doing it quite right.
At the same time I removed some of the dirty flags which on second thought
are nothing more than micro-optimsations that only helped clutter the code.
thanks to Owen Taylor for reporting the bug
Since the CoglMatrix type was added for supporting texture matrices recently
it made sense to be consistent accross the Cogl API and use the Cogl type
over the GL style GLfloat m[16] arrays.
COGL types should be registered inside the GType system, for
bindings and type checking inside properties and signals.
CoglHandle is a boxed type with a ref+unref semantics; slightly evil
from a bindings perspective (we cannot associate custom data to it),
but better than nothing.
The rest of the exposed types are enumerations or bitmasks.
All GL functions that are defined in a version later than 1.1 need to
be called through cogl_get_proc_address because the Windows GL DLL
does not export them to directly link against.
Fixes some blending issues when using color arrays since we were
conflicting with the cogl_enable state + fixes a texture layer
validation bug.
Adds a basic textured triangle to test-vertex-buffer-contiguous.
- In cogl-material.h it directly sets the values of the
CoglMaterialLayerCombineFunc to some GL_* constants. However these
aren't defined in GLES 2 beacuse it has no fixed function texture
combining. Instead the CGL_* versions are now used. cogl-defines.h
now sets these to either the GL_* version if it is available,
otherwise it directly uses the number.
- Under GLES 2 cogl-material.c needs to access the CoglTexture struct
so it needs to include cogl-texture-private.h
- There are now #define's in cogl-gles2-wrapper.h to remap the GL
function names to the wrapper names. These are disabled in
cogl-gles2-wrapper.c by defining COGL_GLES2_WRAPPER_NO_REMAP.
- Added missing wrappers for glLoadMatrixf and glMaterialfv.
- Renamed the TexEnvf wrapper to TexEnvi because the latter is used
instead from the material API.
Cogl previously tried to cache the currently bound texture when
drawing through the material API to avoid excessive GL calls. However,
a few other places in Cogl and Clutter rebind the texture as well so
this can cause problems.
This was causing shaped windows to fail in Mutter because
ClutterGLXTexturePixmap was binding a different texture to update it
while the second texture unit was still active which meant the mask
texture would not be selected when the shaped window was drawn
subsequent times.
Ideally we would fix this by providing a wrapper around glBindTexture
which would affect the cached value. The cache would also have to be
cleared if a selected texture was deleted.
Someone not sure which cogl_color_set_from_* version is "best" may use
set_from_4d because taking doubles implies higher precision. Currently
it doesn't have any advantage.
This makes it consistent with cogl_rectangle_with_{multi,}texture_coords.
Notably the reason cogl_rectangle_with_{multi,}texture_coords wasn't changed
instead is that the former approach lets you describe back facing rectangles.
(though technically you could pass negative width/height values to achieve
this; it doesn't seem as neat.)
Conflicts:
clutter/cogl/gl/cogl-texture.c
clutter/cogl/gles/cogl-primitives.c
* cogl-material:
clutter-{clone-,}texture weren't updating their material opacity.
Updates GLES1 support for CoglMaterial
Normalizes gl vs gles code in preperation for synching material changes
Removes cogl_blend_func and cogl_alpha_func
Fully integrates CoglMaterial throughout the rest of Cogl
[cogl-material] Restore the GL_TEXTURE_ENV_MODE after material_rectangle
[cogl-material] Make the user_tex_coords parameter of _rectangle const
[test-cogl-material] Remove return value from material_rectangle_paint
Add cogl-material.h and cogl-matrix.h to libclutterinclude_HEADERS
[cogl-material] improvements for cogl_material_rectangle
[cogl-material] Adds a cogl_material_set_color function
[cogl-material] Some improvements for how we sync CoglMaterial state with OpenGL
[cogl-material] Converts clutter-texture/clutter-clone-texture to the material API
[doc] Hooks up cogl-material reference documentation
Updates previous GLES multi-texturing code to use CoglMaterial
Adds a CoglMaterial abstraction, which includes support for multi-texturing
[doc] Hooks up cogl-matrix reference documentation
Adds CoglMatrix utility code
[tests] Adds an interactive unit test for multi-texturing
[multi-texturing] This adds a new cogl_multi_texture API for GL,GLES1 + GLES2
This updates cogl/gles in line with the integration of CoglMaterial throughout
Cogl that has been done for cogl/gl.
Note: This is still buggy, but at least it builds again and test-actors works.
Some GLES2 specific changes were made, but these haven't been tested yet.
The GL blend function and alpha function are now controlled by the material
code, and even internally Cogl should now be using the material API when
it needs control of these.
This glues CoglMaterial in as the fundamental way that Cogl describes how to
fill in geometry.
It adds cogl_set_source (), which is used to set the material which will be
used by all subsequent drawing functions
It adds cogl_set_source_texture as a convenience for setting up a default
material with a single texture layer, and cogl_set_source_color is now also
a convenience for setting up a material with a solid fill.
"drawing functions" include, cogl_rectangle, cogl_texture_rectangle,
cogl_texture_multiple_rectangles, cogl_texture_polygon (though the
cogl_texture_* funcs have been renamed; see below for details),
cogl_path_fill/stroke and cogl_vertex_buffer_draw*.
cogl_texture_rectangle, cogl_texture_multiple_rectangles and
cogl_texture_polygon no longer take a texture handle; instead the current
source material is referenced. The functions have also been renamed to:
cogl_rectangle_with_texture_coords, cogl_rectangles_with_texture_coords
and cogl_polygon respectivly.
Most code that previously did:
cogl_texture_rectangle (tex_handle, x, y,...);
needs to be changed to now do:
cogl_set_source_texture (tex_handle);
cogl_rectangle_with_texture_coords (x, y,....);
In the less likely case where you were blending your source texture with a color
like:
cogl_set_source_color4ub (r,g,b,a); /* where r,g,b,a isn't just white */
cogl_texture_rectangle (tex_handle, x, y,...);
you will need your own material to do that:
mat = cogl_material_new ();
cogl_material_set_color4ub (r,g,b,a);
cogl_material_set_layer (mat, 0, tex_handle));
cogl_set_source_material (mat);
Code that uses the texture coordinates, 0, 0, 1, 1 don't need to use
cog_rectangle_with_texure_coords since these are the coordinates that
cogl_rectangle will use.
For cogl_texture_polygon; as well as dropping the texture handle, the
n_vertices and vertices arguments were transposed for consistency. So
code previously written as:
cogl_texture_polygon (tex_handle, 3, verts, TRUE);
need to be written as:
cogl_set_source_texture (tex_handle);
cogl_polygon (verts, 3, TRUE);
All of the unit tests have been updated to now use the material API and
test-cogl-material has been renamed to test-cogl-multitexture since any
textured quad is now technically a test of CoglMaterial but this test
specifically creates a material with multiple texture layers.
Note: The GLES backend has not been updated yet; that will be done in a
following commit.
The Cogl primitives broke for GLES 1.1 and 2 after the cogl-float
branch merge.
CoglPathNode was still being declared as GLfixed for the GLES backend
but it was being filled with float values so they were all ending up
as numbers < 1.
glDrawArrays was being called with GL_FIXED so this has been changed
to GL_FLOAT.
The scanline rasterizer had a leftover hardcoded ClutterFixed constant
to add a small amount to the height of each line.
struct _CoglFloatVec2 has been removed because it is no longer used
anywhere.
The maintainer compiler flags we use trigger warnings and errors
in the autogenerated code that gtk-doc creates to scan the header
and source files. Since we cannot control that, and we must run
a distcheck with both --enable-gtk-doc and --enable-maintainer-flags
turned on, we need to use less-strict compiler flags when inside
the doc/reference subdirectories.
The way to do this is to split the maintainer compiler flags into
their own Makefile variable, called MAINTAINER_CFLAGS. The we
can use $(MAINTAINER_CFLAGS) in the INCLUDES or _CFLAGS sections
of each part of the source directories we wish to check with the
anal retentiveness suited for maintainers.
Improve clutter_sinx() by replacing the low precision CFX_SIN_STEP
with a multiply/divide pair. This reduces the maximum error from
1.8e-04 to 2.4e-05.
http://bugzilla.openedhand.com/show_bug.cgi?id=1314
Based on a patch by Owen W. Taylor <otaylor@fishsoup.net>
This better reflects the fact that the api manages sets of vertex attributes,
and the attributes really have no implied form. It is only when you use the
attributes to draw that they become mesh like; when you specify how they should
be interpreted, e.g. as triangle lists or fans etc. This rename frees up the
term "mesh", which can later be applied to a concept slightly more fitting.
E.g. at some point it would be nice to have a higher level abstraction that
sits on top of cogl vertex buffers that adds the concept of faces. (Somthing
like Blender's mesh objects.) There have also been some discussions over
particle engines, and these can be defined in terms of emitter faces; so some
other kind of mesh abstraction might be usefull here.
To deal with all the corner cases that couldn't be scripted a number of patches
were written for the remaining 10% of the effort.
Note: again no API changes were made in Clutter, only in Cogl.
This is the result of running a number of sed and perl scripts over the code to
do 90% of the work in converting from 16.16 fixed to single precision floating
point.
Note: A pristine cogl-fixed.c has been maintained as a standalone utility API
so that applications may still take advantage of fixed point if they
desire for certain optimisations where lower precision may be acceptable.
Note: no API changes were made in Clutter, only in Cogl.
Overview of changes:
- Within clutter/* all usage of the COGL_FIXED_ macros have been changed to use
the CLUTTER_FIXED_ macros.
- Within cogl/* all usage of the COGL_FIXED_ macros have been completly stripped
and expanded into code that works with single precision floats instead.
- Uses of cogl_fixed_* have been replaced with single precision math.h
alternatives.
- Uses of COGL_ANGLE_* and cogl_angle_* have been replaced so we use a float for
angles and math.h replacements.
For the asynchronous loading we need a function call that parses
a file, given its path, and retrieves the image width and height.
This commit adds cogl_bitmap_get_size_from_file() to the CoglBitmap
API.
The API has been changed to take an explicit length for the number of
texture coordinates passed, and it's now documented that if there are
more layers to the current material than the number of texture coords
passed, then default coordinates will be generated for the other
layers.
cogl_material_rectangle should now handle the case where a single
sliced texture is supplied as a material layer by falling back to
cogl_texture_rectangle. We are nearly at the point that
cogl_texture_rectangle could be deprecated. A few issues remain
though, such as not considering waste in cogl_material_rectangle.
The other colors of a material; such as the ambient and diffuse color are
only relevent when we can enable lighting. This adds a basic unlit
color property.
Later cogl_set_source_color can be integrated to either modify the color
of the current source material, or maintain a special singlton CoglMaterial
that is modified by calls to cogl_set_source_color and implicitly made
current.
