Commit Graph

59 Commits

Author SHA1 Message Date
Neil Roberts
4f08e3cf6e cogl-buffer: Support mapping buffers for write on GLES
GLES has an extension called GL_OES_mapbuffer to support mapping
buffer objects but only for writing. Cogl now has two new feature
flags to advertise whether mapping for reading and writing is
supported. Under OpenGL, these features are always set if the VBO
extension is advertised and under GLES only the write flag is set if
the GL_OES_mapbuffer extension is advertised.
2011-01-13 16:36:45 +00:00
Neil Roberts
7474d320f6 cogl-context: Get rid of the features_cached member
The features_cached member of CoglContext is intended to mark when
we've calculated the features so that we know if they are ready in
cogl_get_features. However we always intialize the features while
creating the context so features_cached will never be FALSE so it's
not useful. We also had the odd behaviour that the COGL_DEBUG feature
overrides were only applied in the first call to
cogl_get_features. However there are other functions that use the
feature flags such as cogl_features_available that don't use this
function so in some cases the feature flags will be interpreted before
the overrides are applied. This patch makes it always initialize the
features and apply the overrides immediately while creating the
context. This fixes a problem with COGL_DEBUG=disable-arbfp where the
first material flushed is done before any call to cogl_get_features so
it may still use ARBfp.
2010-11-24 18:39:07 +00:00
Robert Bragg
f80cb197a9 cogl: rename CoglMaterial -> CoglPipeline
This applies an API naming change that's been deliberated over for a
while now which is to rename CoglMaterial to CoglPipeline.

For now the new pipeline API is marked as experimental and public
headers continue to talk about materials not pipelines. The CoglMaterial
API is now maintained in terms of the cogl_pipeline API internally.
Currently this API is targeting Cogl 2.0 so we will have time to
integrate it properly with other upcoming Cogl 2.0 work.

The basic reasons for the rename are:
- That the term "material" implies to many people that they are
  constrained to fragment processing; perhaps as some kind of high-level
  texture abstraction.
    - In Clutter they get exposed by ClutterTexture actors which may be
      re-inforcing this misconception.
- When comparing how other frameworks use the term material, a material
  sometimes describes a multi-pass fragment processing technique which
  isn't the case in Cogl.
- In code, "CoglPipeline" will hopefully be a much more self documenting
  summary of what these objects represent; a full GPU pipeline
  configuration including, for example, vertex processing, fragment
  processing and blending.
- When considering the API documentation story, at some point we need a
  document introducing developers to how the "GPU pipeline" works so it
  should become intuitive that CoglPipeline maps back to that
  description of the GPU pipeline.
- This is consistent in terminology and concept to OpenGL 4's new
  pipeline object which is a container for program objects.

Note: The cogl-material.[ch] files have been renamed to
cogl-material-compat.[ch] because otherwise git doesn't seem to treat
the change as a moving the old cogl-material.c->cogl-pipeline.c and so
we loose all our git-blame history.
2010-11-03 18:09:23 +00:00
Neil Roberts
63206a208b Merge cogl-program-{gl,gles}.c into one cogl-program.c
This merges the two implementations of CoglProgram for the GLES2 and
GL backends into one. The implementation is more like the GLES2
version which would track the uniform values and delay sending them to
GL. CoglProgram is now effectively just a GList of CoglShaders along
with an array of stored uniform values. CoglProgram never actually
creates a GL program, instead this is left up to the GLSL material
backend. This is necessary on GLES2 where we may need to relink the
user's program with different generated shaders depending on the other
emulated fixed function state. It will also be necessary in the future
GLSL backends for regular OpenGL. The GLSL and ARBfp material backends
are now the ones that create and link the GL program from the list of
shaders. The linked program is attached to the private material state
so that it can be reused if the CoglProgram is used again with the
same material. This does mean the program will get relinked if the
shader is used with multiple materials. This will be particularly bad
if the legacy cogl_program_use function is used because that
effectively always makes one-shot materials. This problem will
hopefully be alleviated if we make a hash table with a cache of
generated programs. The cogl program would then need to become part of
the hash lookup.

Each CoglProgram now has an age counter which is incremented every
time a shader is added. This is used by the material backends to
detect when we need to create a new GL program for the user program.

The internal _cogl_use_program function now takes a GL program handle
rather than a CoglProgram. It no longer needs any special differences
for GLES2. The GLES2 wrapper function now also uses this function to
bind its generated shaders.

The ARBfp shaders no longer store a copy of the program source but
instead just directly create a program object when cogl_shader_source
is called. This avoids having to reupload the source if the same
shader is used in multiple materials.

There are currently a few gross hacks to get the GLES2 backend to work
with this. The problem is that the GLSL material backend is now
generating a complete GL program but the GLES2 wrapper still needs to
add its fixed function emulation shaders if the program doesn't
provide either a vertex or fragment shader. There is a new function in
the GLES2 wrapper called _cogl_gles2_use_program which replaces the
previous cogl_program_use implementation. It extracts the GL shaders
from the GL program object and creates a new GL program containing all
of the shaders plus its fixed function emulation. This new program is
returned to the GLSL material backend so that it can still flush the
custom uniforms using it. The user_program is attached to the GLES2
settings struct as before but its stored using a GL program handle
rather than a CoglProgram pointer. This hack will go away once the
GLSL material backend replaces the GLES2 wrapper by generating the
code itself.

Under Mesa this currently generates some GL errors when glClear is
called in test-cogl-shader-glsl. I think this is due to a bug in Mesa
however. When the user program on the material is changed the GLSL
backend gets notified and deletes the GL program that it linked from
the user shaders. The program will still be bound in GL
however. Leaving a deleted shader bound exposes a bug in Mesa's
glClear implementation. More details are here:

https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-28 19:51:42 +01:00
Emmanuele Bassi
eb179d4b67 build: Start moving to a non-recursive layout
*** WARNING: THIS COMMIT CHANGES THE BUILD ***

Do not recurse into the backend directories to build private, internal
libraries.

We only recurse from clutter/ into the cogl sub-directory; from there,
we don't recurse any further. All the backend-specific code in Cogl and
Clutter is compiled conditionally depending on the macros defined by the
configure script.

We still recurse from the top-level directory into doc, clutter and
tests, because gtk-doc and tests do not deal nicely with non-recursive
layouts.

This change makes Clutter compile slightly faster, and cleans up the
build system, especially when dealing with introspection data.

Ideally, we also want to make Cogl part of the top-level build, so that
we can finally drop the sed trick to change the shared library from the
GIR before compiling it.

Currently disabled:

  ‣ OSX backend
  ‣ Fruity backend

Currently enabled but untested:

  ‣ EGL backend
  ‣ Windows backend
2010-09-29 14:40:15 +01:00
Robert Bragg
8d80a88e14 cogl-program: Adds use_uniform_xyz methods
Instead of exposing an API that provides an OpenGL state machine style
where you first have to bind the program to the context using
cogl_program_use() followed by updating uniforms using
cogl_program_uniform_xyz we now have uniform setter methods that take an
explicit CoglHandle for the program.

This deprecates cogl_program_use and all the cogl_program_uniform
variants and provides the following replacements:
    cogl_program_set_uniform_1i
    cogl_program_set_uniform_1f
    cogl_program_set_uniform_int
    cogl_program_set_uniform_float
    cogl_program_set_uniform_matrix
2010-08-12 16:50:46 +01:00
Robert Bragg
65196a4a9b cogl: Allow setting ARBfp source on a CoglShader
This makes CoglProgram/Shader automatically detect when the user has
given an ARBfp program by checking for "!!ARBfp1.0" at the beginning of
the user's source.

ARBfp local parameters can be set with cogl_program_uniform_float
assuming you pass a @size of 4 (all ARBfp program.local parameters
are vectors of 4 floats).

This doesn't expose ARBfp environment parameters or double precision
local parameters.
2010-08-09 17:27:02 +01:00
Robert Bragg
11045c724c cogl: Adds a COGL_FEATURE_SHADERS_ARBFP feature flag
This adds a public feature flag for ARBfp so developers can determine if
the cogl API supports ARBfp or not.
2010-08-09 17:27:02 +01:00
Robert Bragg
99ae7b15f5 cogl-program: gles2: bind programs lazily as for GL
This makes the gles2 cogl_program_use consistent with the GL version by
not binding the program immediately and instead leaving it to
cogl-material.c to bind the program when actually drawing something.
2010-08-03 15:00:07 +01:00
Robert Bragg
7705469d2b cogl-shader: unifies the driver/{gl,gles} shader files
The per driver implementations of cogl-shader.c had become almost
identical we now have a single cogl/cogl-shader.c instead.
2010-08-03 12:41:37 +01:00
Robert Bragg
6e176f94fa cogl-shader: Store the CoglShaderType in CoglShader
Instead of having to query GL and translate the GL enum into a
CoglShaderType each time cogl_shader_get_type is called we now keep
track of the type in CoglShader.
2010-08-03 12:41:34 +01:00
Neil Roberts
023510636c Plug the leaking CoglProgram and CoglShader
_cogl_program_free and _cogl_shader_free never freed the struct their
structs so it would end up leaking a little bit.
2010-07-22 21:51:43 +01:00
Neil Roberts
4eca571a32 Add an internal _cogl_bitmap_new_from_buffer
This function creates a CoglBitmap which internally references a
CoglBuffer. The map and unmap functions will divert to mapping the
buffer. There are also now bind and unbind functions which should be
used instead of map and unmap whenever the data doesn't need to be
read from the CPU but will instead be passed to GL for packing or
unpacking. For bitmaps created from buffers this just binds the
bitmap.

cogl_texture_new_from_buffer now just uses this function to wrap the
buffer in a bitmap rather than trying to bind the buffer
immediately. This means that the buffer will be bound only at the
point right before the texture data is uploaded.

This approach means that using a pixel array will take the fastest
upload route if possible, but can still fallback to copying the data
by mapping the buffer if some conversion is needed. Previously it
would just crash in this case because the texture functions were all
passed a NULL pointer.

http://bugzilla.clutter-project.org/show_bug.cgi?id=2112
2010-07-15 17:27:15 +01:00
Neil Roberts
ccc3068ffd cogl-bitmap: Encapsulate the CoglBitmap even internally
The CoglBitmap struct is now only defined within cogl-bitmap.c so that
all of its members can now only be accessed with accessor
functions. To get to the data pointer for the bitmap image you must
first call _cogl_bitmap_map and later call _cogl_bitmap_unmap. The map
function takes the same arguments as cogl_pixel_array_map so that
eventually we can make a bitmap optionally internally divert to a
pixel array.

There is a _cogl_bitmap_new_from_data function which constructs a new
bitmap object and takes ownership of the data pointer. The function
gets passed a destroy callback which gets called when the bitmap is
freed. This is similar to how gdk_pixbuf_new_from_data
works. Alternatively NULL can be passed for the destroy function which
means that the caller will manage the life of the pointer (but must
guarantee that it stays alive at least until the bitmap is
freed). This mechanism is used instead of the old approach of creating
a CoglBitmap struct on the stack and manually filling in the
members. It could also later be used to create a CoglBitmap that owns
a GdkPixbuf ref so that we don't necessarily have to copy the
GdkPixbuf data when converting to a bitmap.

There is also _cogl_bitmap_new_shared. This creates a bitmap using a
reference to another CoglBitmap for the data. This is a bit of a hack
but it is needed by the atlas texture backend which wants to divert
the set_region virtual to another texture but it needs to override the
format of the bitmap to ignore the premult flag.
2010-07-15 17:24:01 +01:00
Neil Roberts
00e3d77be3 cogl-texture-3d: Use glTexSubImage3D through an indirect pointer
glTexSubImage3D was being called directly in cogl-texture-3d.c but the
function is only available since GL version 1.2 so on Windows it won't
be possible to directly link to it. Also under GLES it is only
available conditionally in an extension.
2010-07-14 17:45:15 +01:00
Robert Bragg
96b0e6c304 material: splits out all the state flushing code
This moves the code supporting _cogl_material_flush_gl_state into
cogl-material-opengl.c as part of an effort to reduce the size of
cogl-material.c to keep it manageable.
2010-07-13 19:26:58 +01:00
Robert Bragg
5442e429ba material: split the texture unit management out
In general cogl-material.c has become far to large to manage in one
source file. As one of the ways to try and break it down this patch
starts to move some of lower level texture unit state management out
into cogl-material-opengl.c. The naming is such because the plan is to
follow up and migrate the very GL specific state flushing code into the
same file.
2010-07-13 19:26:58 +01:00
Neil Roberts
5288f6d88d Add a Cogl texture 3D backend
This adds a publicly exposed experimental API for a 3D texture
backend. There is a feature flag which can be checked for whether 3D
textures are supported. Although we require OpenGL 1.2 which has 3D
textures in core, GLES only provides them through an extension so the
feature can be used to detect that.

The textures can be created with one of two new API functions :-

cogl_texture_3d_new_with_size

 and

cogl_texture_3d_new_from_data

There is also internally a new_from_bitmap function. new_from_data is
implemented in terms of this function.

The two constructors are effectively the only way to upload data to a
3D texture. It does not work to call glTexImage2D with the
GL_TEXTURE_3D target so the virtual for cogl_texture_set_region does
nothing. It would be possible to make cogl_texture_get_data do
something sensible like returning all of the images as a single long
image but this is not currently implemented and instead the virtual
just always fails. We may want to add API specific to the 3D texture
backend to get and set a sub region of the texture.

All of those three functions can throw a GError. This will happen if
the GPU does not support 3D textures or it does not support NPOTs and
an NPOT size is requested. It will also fail if the FBO extension is
not supported and the COGL_TEXTURE_NO_AUTO_MIPMAP flag is not
given. This could be avoided by copying the code for the
GL_GENERATE_MIPMAP TexParameter fallback, but in the interests of
keeping the code simple this is not yet done.

This adds a couple of functions to cogl-texture-driver for uploading
3D data and querying the 3D proxy
texture. prep_gl_for_pixels_upload_full now also takes sets the
GL_UNPACK_IMAGE_HEIGHT parameter so that 3D textures can have padding
between the images. Whenever 3D texture is uploading, both the height
of the images and the height of all of the data is specified (either
explicitly or implicilty from the CoglBitmap) so that the image height
can be deduced by dividing by the depth.
2010-07-13 14:28:52 +01:00
Neil Roberts
044523db26 Add the deprecated ref-counting for cogl_program
cogl_program has always had cogl_program_ref and cogl_program_unref
but this was missed from 89cb325fd4 so they got removed.
2010-07-09 19:09:49 +01:00
Neil Roberts
b25035ad2d cogl: Don't define the deprecated ref/unref accessors for new types
Previously COGL_OBJECT_DEFINE would always define deprecated
cogl_$type_{ref,unref} functions even if the type is new or if the
type is entirely internal. An application would still find it
difficult to use these because they wouldn't be in the headers, but it
still looks bad that they are exported from the shared library. This
patch changes it so that the deprecated ref counting functions are
defined using a separate macro and only the types that have these
functions in the headers call this macro.
2010-07-09 18:57:54 +01:00
Neil Roberts
da3be3df6b cogl-material: Add support for point sprites
This adds a new API call to enable point sprite coordinate generation
for a material layer:

void
cogl_material_set_layer_point_sprite_coords_enabled (CoglHandle material,
                                                     int layer_index,
                                                     gboolean enable);

There is also a corresponding get function.

Enabling point sprite coords simply sets the GL_COORD_REPLACE of the
GL_POINT_SPRITE glTexEnv when flusing the material. There is no
separate application control for glEnable(GL_POINT_SPRITE). Instead it
is left permanently enabled under the assumption that it has no affect
unless GL_COORD_REPLACE is enabled for a texture unit.

http://bugzilla.openedhand.com/show_bug.cgi?id=2047
2010-07-08 16:34:30 +01:00
Robert Bragg
7571cc1923 cogl: expose the semantic differences of gl/gles2 npot textures
This adds three new feature flags COGL_FEATURE_TEXTURE_NPOT_BASIC,
COGL_FEATURE_TEXTURE_NPOT_MIPMAP and COGL_FEATURE_TEXTURE_NPOT_REPEAT
that can tell you if your hardware supports non power of two textures,
npot textures + mipmaps and npot textures + wrap modes other than
CLAMP_TO_EDGE.

The pre-existing COGL_FEATURE_TEXTURE_NPOT feature implies all of the
above.

By default GLES 2 core supports npot textures but mipmaps and repeat
modes can only be used with power of two textures. This patch also makes
GLES check for the GL_OES_texture_npot extension to determine if mipmaps
and repeating are supported with npot textures.
2010-07-07 13:26:41 +01:00
Neil Roberts
e33a94bff4 cogl: Remove cogl-defines.h.in from the driver make files
Commit 7fae8ac051 changed cogl-defines.h.in so there is only a
single copy in clutter/cogl/ instead of one for each driver. However
the old files were still mentioned in the EXTRA_DIST of the
Makefile.am so make distcheck was failing.
2010-06-23 17:44:09 +01:00
Neil Roberts
9d0962098f cogl-defines.h: Add a COGL_HAS_X11 define
This will be defined in cogl-defines.h whenever Cogl is built using a
winsys that supports X11. This implies CoglTexturePixmapX11 will be
available.

To make this work the two separate cogl-defines.h.in files have been
merged into one. The configure script now makes a @COGL_DEFINES@
substitution variable which contains the #define lines to put in
rather than directly having them in the seperate files.
2010-06-22 12:22:47 +01:00
Neil Roberts
31b5beb2c0 cogl: Add the infrastructure for checking for winsys extensions
This adds the framework needed to check for winsys specific extensions
(such as GLX extensions) using a similar mechanism to the
cogl-feature-functions header. There is a separate
cogl-winsys-feature-functions header which will contain macros to list
the extensions and functions. cogl_create_context_winsys now calls
_cogl_feature_check for each of these functions. _cogl_feature_check
has had to be changed to accept the driver prefix as the first
parameter so that it can prepend "GLX" rather than "GL" in this case.
2010-06-22 12:22:43 +01:00
Neil Roberts
9a1aa08fda cogl: Add an internal CoglTextureRectangle backend
This adds an internal rectangle texture backend which is mostly based
on the CoglTexture2D backend. It will throw assert failures if any
operations are attempted that rectangle textures don't support, such
as mipmapping or hardware repeating.
2010-06-22 11:47:33 +01:00
Neil Roberts
5a5b3914ba cogl: Fix the include path in driver/*/Makefile.am
The include path for the winsys and driver folder was given relative
to $(srcdir) so it would end up relative to the driver folder which is
wrong. It is now specified as $(srcdir)/../../winsys to get the right
location. The driver folder is removed because it is actually just
$(srcdir) and that is already included.
2010-06-22 11:47:32 +01:00
Emmanuele Bassi
7a7dedebd5 cogl-framebuffer: Use the FBO extension for color sizes
OpenGL 3.0 deprecated querying of the GL_{RED,GREEN,BLUE}_BITS
constants, and the FBO extension provides a mechanism to query for the
color buffer sizes which *should* work even with the default
framebuffer. Unfortunately, this doesn't seem to hold for Mesa - so we
just use this for the offscreen CoglFramebuffer type, and we fall back
to glGetIntegerv() for the onscreen one.

http://bugzilla.openedhand.com/show_bug.cgi?id=2094
2010-06-10 19:53:39 +01:00
Robert Bragg
82e80e6765 material: Avoid redundant glBindTexture calls
This adds a _cogl_bind_gl_texture_transient function that should be used
instead of glBindTexture so we can have a consistent cache of the
textures bound to each texture unit so we can avoid some redundant
binding.
2010-06-09 17:26:15 +01:00
Robert Bragg
acc44161c1 material: Adds backend abstraction for fragment processing
As part of an effort to improve the architecture of CoglMaterial
internally this overhauls how we flush layer state to OpenGL by adding a
formal backend abstraction for fragment processing and further
formalizing the CoglTextureUnit abstraction.

There are three backends: "glsl", "arbfp" and "fixed". The fixed backend
uses the OpenGL fixed function APIs to setup the fragment processing,
the arbfp backend uses code generation to handle fragment processing
using an ARBfp program, and the GLSL backend is currently only there as
a formality to handle user programs associated with a material. (i.e.
the glsl backend doesn't yet support code generation)

The GLSL backend has highest precedence, then arbfp and finally the
fixed. If a backend can't support some particular CoglMaterial feature
then it will fallback to the next backend.

This adds three new COGL_DEBUG options:
* "disable-texturing" as expected should disable all texturing
* "disable-arbfp" always make the arbfp backend fallback
* "disable-glsl" always make the glsl backend fallback
* "show-source" show code generated by the arbfp/glsl backends
2010-06-09 17:15:59 +01:00
Damien Lespiau
56dd71dba0 cogl: Introduce private feature flags and check for ARB_fp
The Cogl context has now a feature_flags_private enum that will allow us
to query and use OpenGL features without exposing them in the public
API.

The ARB_fragment_program extension is the first user of those flags.
Looking for this extension only happens in the gl driver as the gles
drivers will not expose them.

One can use _cogl_features_available_private() to check for the
availability of such private features.

While at it, reindent cogl-internal.h as described in CODING_STYLE.
2010-06-09 15:19:30 +01:00
Damien Lespiau
58b0028b52 analysis: FALSE/0 used in pointer context
While this is totally fine (0 in the pointer context will be converted
in the right internal NULL representation, which could be a value with
some bits to 1), I believe it's clearer to use NULL in the pointer
context.

It seems that, in most case, it's more an overlook than a deliberate
choice to use FALSE/0 as NULL, eg. copying a _COGL_GET_CONTEXT (ctx, 0)
or a g_return_val_if_fail (cond, 0) from a function returning a
gboolean.
2010-06-01 12:08:18 +01:00
Emmanuele Bassi
72f4ddf532 Remove mentions of the FSF address
Since using addresses that might change is something that finally
the FSF acknowledge as a plausible scenario (after changing address
twice), the license blurb in the source files should use the URI
for getting the license in case the library did not come with it.

Not that URIs cannot possibly change, but at least it's easier to
set up a redirection at the same place.

As a side note: this commit closes the oldes bug in Clutter's bug
report tool.

http://bugzilla.openedhand.com/show_bug.cgi?id=521
2010-03-01 12:56:10 +00:00
Neil Roberts
82fd07c54a cogl-vertex-buffer: Add support for unsigned int indices
This adds a COGL_INDICES_TYPE_UNSIGNED_INT enum value so that unsigned
ints can be used with cogl_vertex_buffer_indices_new.  Unsigned ints
are not supported in core on GLES so a feature flag has also been
added to advertise this. GLES only sets the feature if the
GL_OES_element_index_uint extension is available. It is an error to
call indices_new() with unsigned ints unless the feature is
advertised.

http://bugzilla.openedhand.com/show_bug.cgi?id=1998
2010-02-26 10:56:35 +00:00
Neil Roberts
b583083a3f gles2: Remove the special wrapper for glBindTexture
Previously the GLES2 backend needed a special wrapper for
glBindTexture because it needed to know the internal GL format of the
texture in order to correctly implement the GL_MODULATE texture env
mode. When GL_MODULATE is used then the RGB values are taken from the
previous texture layer rather than being fetched from the
texture. However since the material API was added Cogl no longer uses
the GL_MODULATE texture env mode but instead always uses GL_COMBINE.

Compiling the GLES2 backend broke since the more-texture-backends
branch merge because the cogl_get_internal_gl_format function was
removed and there was one place in GLES2 specific code that was using
this to bind the texture.
2010-02-25 12:50:52 +00:00
Robert Bragg
ba4b00be42 cogl: remove redundant _cogl_journal_flush prototype
There was a redundant _cogl_journal_flush function prototype in
cogl-primitives.h
2010-02-12 14:05:01 +00:00
Robert Bragg
0f5f4e8645 cogl: improves header and coding style consistency
We've had complaints that our Cogl code/headers are a bit "special" so
this is a first pass at tidying things up by giving them some
consistency. These changes are all consistent with how new code in Cogl
is being written, but the style isn't consistently applied across all
code yet.

There are two parts to this patch; but since each one required a large
amount of effort to maintain tidy indenting it made sense to combine the
changes to reduce the time spent re indenting the same lines.

The first change is to use a consistent style for declaring function
prototypes in headers. Cogl headers now consistently use this style for
prototypes:

 return_type
 cogl_function_name (CoglType arg0,
                     CoglType arg1);

Not everyone likes this style, but it seems that most of the currently
active Cogl developers agree on it.

The second change is to constrain the use of redundant glib data types
in Cogl. Uses of gint, guint, gfloat, glong, gulong and gchar have all
been replaced with int, unsigned int, float, long, unsigned long and char
respectively. When talking about pixel data; use of guchar has been
replaced with guint8, otherwise unsigned char can be used.

The glib types that we continue to use for portability are gboolean,
gint{8,16,32,64}, guint{8,16,32,64} and gsize.

The general intention is that Cogl should look palatable to the widest
range of C programmers including those outside the Gnome community so
- especially for the public API - we want to minimize the number of
foreign looking typedefs.
2010-02-12 14:05:00 +00:00
Robert Bragg
10fa7c7ce9 cogl: deprecates cogl_check_extension
OpenGL is an implementation detail for Cogl so it's not appropriate to
expose OpenGL extensions through the Cogl API.

Note: Clutter is currently still using this API, because it is still
doing raw GL calls in ClutterGLXTexturePixmap, so this introduces a
couple of (legitimate) build warnings while compiling Clutter.
2010-02-12 14:05:00 +00:00
Damien Lespiau
ca80e8802b cogl-pixel-buffer: Add a fallback path
First, let's add a new public feature called, surprisingly,
COGL_FEATURE_PBOS to check the availability of PBOs and provide a
fallback path when running on older GL implementations or on OpenGL ES

In case the underlying OpenGL implementation does not provide PBOs, we
need a fallback path (a malloc'ed buffer). The CoglPixelBufer
constructors will instanciate a subclass of CoglBuffer that handles
map/unmap and set_data() with a malloc'ed buffer.

The public feature is useful to check before using set_data() on a
buffer as it will mean doing a memcpy() when not supporting PBOs (in
that case, it's better to create the texture directly instead of using a
CoglBuffer).
2010-02-08 17:14:49 +00:00
Damien Lespiau
dbef77cd8b cogl: new textures sould have GL_TEXTURE_MIN_FILTER set to GL_LINEAR
The only way the user has to set the mipmap filters is through the
material/layer API. This API defaults to GL_LINEAR/GL_LINEAR for the max
and min filters. With the main use case of cogl being 2D interfaces, it
makes sense do default to GL_LINEAR for the min filter.

When creating new textures, we did not set any filter on them, using
OpenGL defaults': GL_NEAREST_MIPMAP_LINEAR for the min filter and
GL_LINEAR for the max filter. This will make the driver allocate memory
for the mipmap tree, memory that will not be used in the nominal case
(as the material API defaults to GL_LINEAR).

This patch tries to ensure that the min filter is set to GL_LINEAR
before any glTexImage*() call is done on the texture by setting the
filter when generating new OpenGL handles.
2010-02-08 17:14:49 +00:00
Neil Roberts
f5d809f1e8 Merge branch 'master' into more-texture-backends 2010-01-15 12:15:46 +00:00
Neil Roberts
dfc3dd9c43 cogl: Remove the CGL_* defines
These macros used to define Cogl wrappers for the GLenum values. There are
now Cogl enums everywhere in the API where these were required so we
shouldn't need them anymore. They were in the public headers but as
they are not neccessary and were not in the API docs for Clutter 1.0
it should be safe to remove them.
2010-01-12 17:10:15 +00:00
Neil Roberts
f17767e4c1 cogl: Add _cogl_texture_driver_upload_to_gl
This provides a way to upload the entire data for a texture without
having to first call glTexImage and then glTexSubImage. This should be
faster especially with indirect rendering where it would needlessy
send the data for the texture twice.
2009-12-02 22:03:26 +00:00
Neil Roberts
5030356e0e cogl: Move data only used for upload out of CoglTexture
The CoglTexture struct previously contained some fields which are only
used to upload data such as the CoglBitmap and the source GL
format. These are now moved to a separate CoglTextureUploadData struct
which only exists for the duration of one of the cogl_texture_*_new
functions. In cogl-texture there are utility functions which operate
on this new struct rather than on CoglTexture directly.

Some of the fields that were previously stored in the CoglBitmap
struct are now copied to the CoglTexture such as the width, height,
format and internal GL format.

The rowstride was previously stored in CoglTexture and this was
publicly accessible with the cogl_texture_get_rowstride
function. However this doesn't seem to be a useful function because
there is no need to use the same rowstride again when uploading or
downloading new data. Instead cogl_texture_get_rowstride now just
calculates a suitable rowstride from the format and width of the
texture.
2009-12-02 22:03:07 +00:00
Neil Roberts
b4fc8faaab cogl: Use APIENTRY for GL function pointer declarations
This matters for platforms such as Windows that use a different
calling covention from the default for GL functions.
2009-11-18 19:24:09 +00:00
Emmanuele Bassi
7372e1d4f9 build: Add cogl-feature-functions.h to the dist 2009-11-18 14:43:46 +00:00
Neil Roberts
0e112c3371 cogl: Add the missing terminators for the arrays of feature functions
_cogl_feature_check expects the array of function names to be
terminated with a NULL pointer but I forgot to add this. This was
causing crashes depending on what happened to be in memory after the
array.
2009-11-18 13:23:10 +00:00
Neil Roberts
0927f35e7a cogl: Use the GL_EXT_blend_{func,equation}_separate extensions
We should use these extensions to check for glBlendFuncSeparate and
glBlendEquationSeparate as well as checking the GL version number.
2009-11-17 18:06:31 +00:00
Neil Roberts
2a53b84d18 cogl: Don't bother checking for NPOTs or VBOs on later GLs
For VBOs, we don't need to check for the extension if the GL version
is greater than 1.5. Non-power-of-two textures are given in 2.0.

We could also assume shader support in GL 2.0 except that the function
names are different from those in the extension so it wouldn't work
well with the current mechanism.
2009-11-17 17:22:22 +00:00
Neil Roberts
058d79dce2 cogl: Make it easier to add checks for GL extensions
Previously if you need to depend on a new GL feature you had to:

- Add typedefs for all of the functions in cogl-defines.h.in

- Add function pointers for each of the functions in
  cogl-context-driver.h

- Add an initializer for the function pointers in
  cogl-context-driver.c

- Add a check for the extension and all of the functions in
  cogl_features_init. If the extension is available under multiple
  names then you have to duplicate the checks.

This is quite tedious and error prone. This patch moves all of the
features and their functions into a list of macro invocations in
cogl-feature-functions.h. The macros can be redefined to implement all
of the above tasks from the same header.

The features are described in a struct with a pointer to a table of
functions. A new function takes the feature description from this
struct and checks for its availability. The feature can take a list of
extension names with a list of alternate namespaces (such as "EXT" or
"ARB"). It can also detect the feature from a particular version of
GL.

The typedefs are now gone and instead the function pointer in the Cogl
context just directly contains the type.

Some of the functions in the context were previously declared with the
'ARB' extension. This has been removed so that now all the functions
have no suffix. This makes more sense when the extension could
potentially be merged into GL core as well.
2009-11-17 15:11:26 +00:00