As per GNOME/mutter!385 [1], the compositor is finalized an its pointer
cleared on display close.
However, since the shell reacts to such events instead of controlling them,
when the shell is stopping or restarting and its display closing, the shell
stage destroys its children after the display closing is finished and during
this process the focus is unset, causing focus_actor_changed() to be called
and thus calls to meta_stage_is_focused() which deferences the now NULL
compositor, leading to a crash on shutdown.
Since after this point we should just ignore any stage event, disconnect
from them all.
[1] https://gitlab.gnome.org/GNOME/mutter/merge_requests/385https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/746
If graphical applications want to start from systemd units, they need to
start after we're properly ready to display them. This is particularly
important under X where `_GTK_FRAME_EXTENTS` and other xprops are needed
to have the right theming.
We're doing this in an idle callback so that the dynamic starting of
`gnome-session-x11-service.target` (which launches `gsd-xsettings`) as
the result of a signal emission happens before us signalling we're ready
for later things to start.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/750
Until commit 506b75fc7f we got away with not handling a NULL return
value, as cairo_surface_destroy() deals with a NULL surface; the same
isn't true for get_width/get_height, so guard to code in question to
prevent a crash.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1678
This is now handled in Mutter. Also, respect the result size instead
of assuming it to be equal to the clip size, as the clip takes actor
coordinates while the result takes buffer coordinates.
This can be fixed in a future API iteration.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/728
We allow opening new windows as a fallback in case the app doesn't give
us explicit information about it, but we don't want to allow opening new
windows if we're unable to ask for this information (we can only use the
APIs to get this information while the app is RUNNING).
So always return FALSE in case the app is STARTING, always return TRUE
in case the app is STOPPED (starting an app always opens a new window)
and go through the usual checks in case the app is RUNNING (and
eventually fall back to FALSE).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/121
The use of box-shadow on a StWidget that has a background-gradient was
not been rendered correctly, the shadow borders was calculated inside
the st_theme_node_prerender_shadow function and in the case that we've a
prerendered_texture the max_borders was not calculated and are 0.
This patch creates a new static function to compute shadow maximum
borders copying the code from st_theme_node_prerender_shadow, and call
this new method in the case that we've a prerendered_texture.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1186
Evolution draws in libsoup, which exposes deprecated types in its
API. While its headers have been fixed to guard the affected symbols,
those fixes aren't in our CI images yet.
Until we get a fixed version, just disable all deprecation warnings
during the include in order to not trip over "foreign" bugs.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/709
We aren't using any deprecated evolution-data-server API, so we can
turn it off; this avoids compiler warnings for glib deprecations
used by those functions, which makes it harder to spot warnings for
our own code base.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/709
We translate the raw stream content far too directly into a char*,
it notably forgets that the stream does not have nul-ended data,
this means we are potentially adding garbage after the pasted content.
Tentatively fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1570
An Endless OS system was found in the wild with a malformed
.local/share/gnome-shell/notifications. When deserialized in Python,
after passing trusted=True to g_variant_new_from_bytes(), the first
element of the first struct in the array looks like this:
In [41]: _38.get_child_value(0).get_child_value(0)
Out[41]: GLib.Variant('s', '\Uffffffff\Uffffffff\Uffffffff\Uffffffff\Uffffffff')
When deserialised in GJS, we get:
gjs> v.get_child_value(0).get_child_value(0)
[object variant of type "s"]
gjs> v.get_child_value(0).get_child_value(0).get_string()
typein:43:1 malformed UTF-8 character sequence at offset 0
@typein:43:1
@<stdin>:1:34
While g_variant_new_from_bytes() doesn't have much to say about its
'trusted' parameter, g_variant_new_from_data() does:
> If data is trusted to be serialised data in normal form then trusted
> should be TRUE. This applies to serialised data created within this
> process or read from a trusted location on the disk (such as a file
> installed in /usr/lib alongside your application). You should set
> trusted to FALSE if data is read from the network, a file in the
> user's home directory, etc.
Persistent state is read from the user's home directory, so it should
not be trusted. With trusted=False, the string value above comes out as
"".
I don't have an explanation for how this file ended up being malformed.
I also don't have an explanation for when this started crashing: my
guess is that recent GJS became stricter about validating UTF-8 but I
could be wrong!
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1552
Instead of going via the MetaShapedTexture to get the cairo surface, get
it from the window actor. The window actor can then handle this in a way
that makes it include potential subsurfaces.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/692
Using the bus name to notify service startup to systemd has some
disadvantages. The main one being that systemd will consider a
gnome-shell restart (Alt+F2 r) a service failure and restart the shell,
cleaning up all its children (i.e. user launched applications). In the
future the shell should launch applications in their own transient unit
so that a service restart does not affect applications.
Another potential issue is that we must never load
gnome-shell-wayland.service and gnome-shell-x11.service at the same
time, as systemd does not like two services providing the same bus
name.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1496https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/690
Mutter's Clutter fork can no longer be initialized separatedly, as
its backend now draws from MetaBackend. Adjust the code to use the
newly added test initialization function instead to get the test
back up.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/691
Clutter's backend code depends on MetaBackend now, which makes it
impossible to initialize without resorting to private mutter API.
Luckily we only need Clutter for interactive tests which are broken
anyway, as Clutter.main() and friends were removed a while ago.
So for now, get at least unit tests working again by simply the
unnecessary Clutter initialization.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/691
Popups and other override-redirect windows are meaningless to everything
that depends on the ShellWindowTracker. Ignoring those windows will result
in less ShellApp::windows-changed signal emissions, and less activity in
the AppMenuButton and everything else that depends on them.
Reduces gnome-shell CPU activity while typing on the Epiphany addressbar,
as the pop up animation there results in a number of xdg_popup being
created and destroyed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/642https://gitlab.gnome.org/GNOME/mutter/issues/556
Now that we allow to disable session mode extensions, it can be useful
to reset an extension to its original state, that is disabled in the
regular session, but possibly enabled via the session mode.
Add a corresponding command.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
Change both 'enabled-extensions' and 'disabled-extensions' keys as in
commit ce1bee727. While those actions are now also exposed by the
shell's D-Bus API, there is some value in allowing the tool to be used
outside a running GNOME session (for example in setup scripts), so
keep changing the GSettings keys directly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
With the addition of the 'disabled-extensions' key in commit ce1bee727,
the way extensions are enabled/disabled changed: Now a UUID is always
added to one list and removed from another.
Prepare for that by generalizing the relevant bits of the existing
enable/disable commands as helper functions.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
The ability to install unaudited extensions directly from a zip file
can be useful for testing and code review, so implement a corresponding
command that complements the previously added 'pack' command.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
Extensions are uploaded to extensions.gnome.org as zip files that
not only contain the extension sources, but also compiled GSettings
schemas and message catalogues. To make this more convenient, add
a corresponding command for creating an archive suitable for up-
loading.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
We already support displaying extension details for the list command,
so it's a logical extension to also support showing extension info
for a particular extension (not least because the shell has a
corresponding D-Bus method).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
In addition to a plain list of all extensions, add options to display
additional details of each extensions and to filter the list by
enabled state or install location.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
This implements more functionality of the existing tool and, as
'reload' is an unreliable feature that doesn't work more often
than not, the last bit that we will replicate.
The command follows the original for the most part, with the most
important difference being the installed template, which doesn't
provide any sample functionality and uses modern JS syntax.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
This replicates the most basic functionality of the existing
gnome-shell-extension-tool, albeit using a git/gio/gsettings
style command interface rather than plain options; this will
allow us to implement more complex commands that have options
on their own in the future.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1234
Whenever an app is installed, the usual routine is
to run 'gtk-update-icon-cache' after installing all
of the app's files.
The side effect of that is that the .desktop file of
the application is installed before the icon theme
is updated. By the time GAppInfoMonitor emits the
'changed' signal, the icon theme is not yet updated,
leading to StIcon use the fallback icon.
Under some circumstances (e.g. on very slow spinning
disks) the app icon is never actually loaded, and we
see the fallback icon forever.
Monitor the icon theme for changes when an app is
installed. Try as many as 6 times before giving up
on detecting an icon theme update.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/661
The texture cache, right now, only monitors for
complete theme changes. If the contents of the
icon theme change, however, the texture cache
isn't properly invalidated.
This manifests itself as a randomly reproducible
bug when installing an app; the app icon may be
the fallback forever, or as long as something else
updates the icon theme.
Watch for the GtkIconTheme:changed signal, and
evict the texture cache when the theme changes.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/661
StAdjustment implements the ClutterAnimatable interface, so we can
already animate its properties with ClutterPropertyTransitions.
But as it is currently not possible to associate a transition with
an adjustment, it must be owned (and kept alive in case of GC) by
the calling code.
Change that by implementing the same (add|remove|get)_transition() API
as ClutterActor, so we can use a familiar API and even duck typing in
case of javascript.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/669
We now have everything in place to replace Tweener for all animatable
properties with implicit animations, which has the following benefits:
- they run entirely in C, while Tweener requires context switches
to JS each frame
- they are more reliable, as Tweener only detects when an animation
is overwritten with another Tween, while Clutter considers any
property change
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/22
We currently only consider a remote "app.new-window" action when running,
but not a fixed "new-window" action in the .desktop file. The latter is
clearly useful as well, in particular as open_new_window() already does,
so add it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/665
`g_object_notify()` actually takes a global lock to look up the property
by its name, which means there is a performance hit (albeit tiny) every
time this function is called. For this reason, always try to use
`g_object_notify_by_pspec()` instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/652
In `st`, we can do this by using `ST_PARAM_*`. In the other code files,
just use `G_PARAM_STATIC_STRINGS` directly.
This is just a minor convenience to prevent a few unnecessary string
copies.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/646
A generic, introspectable Shader effect is not only more flexible
than a shader actor, it will also make it much easier to turn
Lightbox into an actor subclass and replace Tweener with Clutter's
own animation support.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/651
Since -Werror=missing-braces is used, having missing braces warnings
aren't allowed. However, the first member of struct sigaction is a union
whose first member is a pointer, causing clang to produce warnings when
it is initialized to { 0 }.
Instead of initializing to a zero value, we can specify values of
members directly in the initializer to avoid warnings.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/633
Glib stopped providing any fallback implementations on systems without
memmove() all the way back in 2013. Since then, the symbol is a simple
macro around memmove(); use that function directly now that glib added
a deprecation warning.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/632
st_theme_node_paint_equal() was originally added to preserve paint state
when a style change didn't affect any of StWidget's cached background
resources.
That's why using it for filtering out unneeded style changes as in commit
f662864a misses any non-background related properties that are relevant
for subclasses. Add additional tests to make sure we keep emitting the
signal in those cases.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1212
This is a small convenience wrapper around clutter_color_equal()
for the different color components, which also handles the case
where one (or both) of the icon colors are %NULL.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1212
Since priv->device gets set to NULL inside st_button_release, ungrab the
input device before calling st_button_release and avoid
clutter_input_device_ungrab failing with a critical error.
This fixes a regression introduced with
d5a1a888d9
While at it, also remove the superfluous line resetting priv->device to
NULL and move the check for priv->grabbed into an elseif block since
there should be no case where StButton has both grabs at the same time.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/614
Since the removal of the old (pre-3.16) message tray, legacy tray icons
are very unlikely to be placed in a container that is animated using the
deprecated anchor point.
Just assume that the regular stage position is good enough.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/572
If the state we're trying to delete does not exist, do not log an
error.
Prevents this journal warning at startup:
gnome-shell[1082]: Could not delete runtime/persistent state file: Error removing file /run/user/1000/gnome-shell/runtime-state-LE.:0/screenShield.locked: No such file or directory
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
Instead of considering a GValue containing a NULL string to be a
programmer error, simply return NULL.
remove_mnemonics() is in fact called on the value of the
"choice-label" property as well, which has NULL as its default
value.
This prevents triggering the following gnome-shell warning:
gnome-shell[1082]: remove_mnemonics: assertion 'label != NULL' failed
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
Util.ensureActorVisibleInScrollView takes care of the potential scroll view fade
effect in order to compute the scroll offset, reading the ScrollViewFade's
`vfade-offset` property. This was correctly working until gnome 3.30 cycle.
However such property isn't defined now because since gjs 1.54, it can only
fetch introspected properties and St.ScrollViewFade was considered a private API
not exposed by gir.
Fix this by also introspecting st-scroll-view-fade sources.
Not being considered private anymore, install the header.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1061
Updating the :first/:last-child pseudo classes can result in a lot
of unnecessary style changes when bulk-adding children to a container,
as every child ends up as the new last child.
Address this by deferring the style change to an idle, so we only do
the work once for the actual first and last child.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/529
Images are loaded either with a supplied fixed size, or using the "native"
dimensions of the file. When creating a content image from the loaded data,
we currently simply apply this directly to the preferred size.
This works usually fine: GdkPixbuf will always keep the aspect ratio, so
if only one dimension is provided, the other will be adjusted accordingly:
Loading a 200x200 image with a requested size of (100, -1) will result in
a 100x100 content image.
There is a catch though: GdkPixbuf will only scale *down* to the requested
size, no up. That is, loading a 100x100 image with a requested size of
(200, -1) will result in a 100x100 pixbuf. But as we assume that the pixbuf
size matches the requested size, the image content ends up with 200x100.
Fix this by explicitly handling the case where only one size was supplied,
and make the other dimension take the aspect ratio into account
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/525
The parameters that may affect the icon on ::style-changed are more size
related than visual (we listen to icon theme changes for the latter). It
makes sense to just update the icon if the size came out different.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/524
With a high enough amount of actors, there may be enough theme nodes and
signal connections on StTheme::custom-stylesheets-changed that
g_signal_handlers_disconnect_by*() on dispose becomes expensive, this may
become a surprisingly hot spot in StWidget::style-changed.
Keep the handler ID around and use g_signal_handler_disconnect() to avoid
linear lookups for the matching func/data.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/524
A window being unmanaged can cause the ShellApp to be removed from
the ShellAppSystem, which if we are unlucky is the app's last
reference, causing it to be disposed and freed. It would be bad if this
happened before we finished handling the signal.
Use g_signal_connect_object to ensure that a reference is held to
the ShellApp for the duration of the signal handler, delaying its
last-unref.
In particular, when a signal handler calls _shell_app_remove_window(),
there is a brief period for which ShellApp breaks the intended
invariant (see !497) that app->running_state is non-NULL if and only if
app->running_state->windows is also non-NULL (non-empty). Freeing the
ShellApp at this point would cause a crash. This seems likely to be the
root cause of <https://gitlab.gnome.org/GNOME/gnome-shell/issues/750>,
<https://gitlab.gnome.org/GNOME/gnome-shell/issues/822> and
<https://bugs.debian.org/926212>.
Signed-off-by: Simon McVittie <smcv@debian.org>
Compare painting/geometry of old and new paint nodes, so it's ensured to
be only emitted on actual style changes. Emission still must be propagated
through to children, though.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1153
Actors themed through CSS should ideally get sizes and positions that
conform to the "pixel grid". A notorious example is the panel that has a
height of 1.86em. On unchanged font settings and hidpi that translates to
55px, which leaves the workarea with "half pixels" that hidpi wayland
applications don't know how to fully cover.
If the requested height is a multiple of the scale factor, the workarea
and maximized applications can then work on full pixels.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/91
The same code for reading the current magnifier state is repeated in both
shell-recorder, shell-screenshot and magnifier itself.
So to move this inside a property of st-settings so that we can refer to it
all over the places removing duplications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/473
If the locale doesn't honor strftime()'s %c argument, we would end up
feeding NULLs into GdkPixbuf tagging. Fallback to a sensible (although
not nicely localized) datetime string.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1017
Just like we take a remote "new-window" action into account for
opening new windows, we should call an explicit "quit" action
before falling back to closing all the app's windows on quit.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
For window backed apps, create_icon_texture() doesn't return an StIcon
but a generic widget. Set an appropriate style class to make it easier
to apply a specific style only to fallback icons.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1027
With StImageContent, the meaning of passing -1 as size parameter changed
from "load the image at its preferred size" to "abort the session". It
is therefore no longer possible to just load the image and then have it
scaled by applying a CSS size to the texture's parent.
Setting the size from CSS is useful though, so to still allow that, fall
back to the actor's size (which can be determined by the style).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1027
We need this to run `test-theme`, otherwise when run as part of the
build tests it fails like:
error while loading shared libraries: libmutter-cogl-4.so.0: cannot
open shared object file: No such file or directory
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/442
The executable is assumed to be run from $top_srcdir/src, which is
essentially an autotools left-over (it's where the program ended
up with srcdir == builddir).
Now with meson, its actual srcdir makes more senses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/419
Clutter no longer hard-codes a resolution of 96 DPI (although that's
still the default), so any assertions of sizes for physical units
may be off.
Fix this by setting up the test environment according to the
assumptions.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/419
Since we started to support tray icons on wayland, the icon we show
is not the actual XEmbed window. Instead, we let mutter create a
MetaWindow for it, then use its window actor as source for a clone
we (or nowadays: extensions) can add, remove and destroy freely.
To not let the real icon get in the way, we set an empty input shape
and make its window actor fully transparent. This works OK on X11,
but on wayland all events still go through Clutter, so any reactive
surface actor inside the window actor will block events for any actors
underneath (and status icons go into the top-windows group, so almost
all actors are affected).
Luckily we can pile another hack onto the pile of status icon hacks ...
https://gitlab.gnome.org/GNOME/gnome-shell/issues/191
While mapping the :first/:last-child pseudo classes directly to the
ClutterActor:first-child/:last-child properties allows for an easy
implementation, it is unexpected that rules can appear to not have
an effect because the selected child is hidden. GTK's behavior of
applying the classes to visible children makes much more sense, so
change our implementation to do the same.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/312
When we grab a screenshot of a framebuffer scaled shell, we shoudl apply the
device scale to the image surface, while the monitor scaling should be applied
to the cursor surface, so that it's painted at proper coordinates and in proper
size in the generated image.
This is not needed for XWayland clients as they are not scaled anyways, while
for wayland clients that are painted in multiple monitors, this might cause
a lower quality cursor in the lower dpi monitor, because the cursor sprite is
generated for the monitor scale, and not for the surface scale.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5
Under wayland, if the cursor should be included when doing a fullscreen
screenshot, we can rely on mutter "paint" signal to have it composited for free.
Otherwise if it's not requested, we can use the "actors-painted" signal to get a
stage texture before the mouse overlay has been added.
Instead, under X11 or when only a window screenshot is requested, we still
need to draw it manually.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5
Get from clutter the capture sizes and scale and don't mind
about doing any rounding here, as it might be different
from the one done at clutter level (causing mismatch and
not-working videos). Delegate this to clutter, and forget
about the internal details.
These values are then used to composte the image and set the video caps.
https://bugzilla.gnome.org/show_bug.cgi?id=7650111
It might happen that the target clutter actor that we return on call
of st_texture_cache_load_sliced_image might be destroyed while the
loading task is still running. To protect from this, let's connect
to "destroy" signal and when this happens we use a cancellable to
stop the task.
This allows to safely reuse the return value of this function to
cancel the execution and avoiding that load_callback is called
even for a request that is not anymore under our control.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
When loading an actor for a sliced image actor, we can now use the
REQUEST_CONTENT_SIZE request-mode for the actor since we the content image
has now a predictable size and thus we can be sure that the size will be applied
taking care of the resource scale.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5
Create StImageContent as a simple ClutterImage with preferred width/height
properties in order to be able to use explicit sizing when creating clutter
contents that will be applied to actors whose size depends on the content itself.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5
Instead of just passing a scale when getting a cached icon, pass both a
'paint_scale', the scale of which the icon will be painted on the
stage, and a 'resource_scale', the scale of the resource used for
painting.
In effect, the texture size will use the scale 'paint_scale * resource_scale'
in a ceiled value while the size of the actor will use 'paint_scale' when
determining the size.
this would load a bigger texture, but the downscaling would keep the visual
quality.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5https://bugzilla.gnome.org/show_bug.cgi?id=765011
Create the surfaces for background shadows at scaled sizes and then draw on them
using logical coordinates, by setting the surface device scale accordingly.
Use the said surface scale when generating the actual shadow cairo pattern
but in such case, to reduce the number of code changes, is better to work in
absolute coordinates, and to do so:
1) Create a temporary shadow-spec copy with scaled values to absolute sizes
2) Invert the scaling on the shadow matrix
3) Do the actual painting in absolute coordinates
4) Set the shadow matrix scaling back to the logical coordinates.
Finally scale down the created shadow pattern surface size when painting it,
applying again a reverse scale to the matrix.
https://bugzilla.gnome.org/show_bug.cgi?id=765011https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5
Pass resource-scale to drawing phase, and use it to create texture
surfaces scaled with the widget current scaling.
Also redraw by default widgets when the resource scale changes.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
A fractional resource scale would mean we never use the fast path for
creating the shadow, because we'd cast the int to a float before
comparing, which would never match.
Instead compare the expected texture size with the source texture, to
actually potentially trigger the fast path.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
The fade shader will draw the fade effect up until the border pixel. If
we set the bottom right coordinate to the outer edge of the pixel we
might end up not drawing the fade effect on all of the pixels. This
could for example happen if one logical pixel (clutter stage pixel)
consists of more than one physical pixel.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
This commit makes StWidget manage the scale of which its associated
resources should be multiplied with. The resource scale is calculated
by clutter, and is retrieved by clutter_actor_get_resource_scale(). Due
to the resource scale not always being available, the getter may fail,
and the actual widget that draws the content will have to deal with
this situation.
As the resource scale depends on where on the stage the widget is drawn,
the resource scale will in general be available once the widget is
mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
instead of explicit screen arguments and `gdk_screen_get_number()`, as nowadays there
is always only one screen. This silences some deprecation warnings and removes
deprecated API.
Bonus: some code style cleanups
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/422
Since commit deec0bf255, the texture cache is based on ClutterImage
rather than ClutterTexture. As ClutterImage (like all ClutterContent)
is only concerned with painting, it doesn't influence the size of the
actor it is added to at all, and the returned actor will now stay at
size 0x0 after the image has been loaded.
Set up the actor to follow the content's size instead, to get closer
to the previous behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/402
As the app menu is being phased out, it is no longer a good indicator
for GtkApplications. Instead, base the check directly on the appropriate
D-Bus properties.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
In order to replace GTK+'s GtkDirectionType. It's bit-compatible with it,
too. All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
In order to replace GTK+'s GtkPolicyType. It's bit-compatible with it, too.
All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
It apparently uses no ClutterTexture specifics, and instead
only tries to match what StTextureCache used to return.
Since StTextureCache now returns ClutterActor, also use a
ClutterActor on ShellApp.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/373
_st_create_shadow_pipeline_from_actor creates shadow pipelines
from actors. This function special-cases ClutterTexture as a
small performance improvement, since we can have access to the
CoglTexture easily with it. However, recent commits removed all
usage of ClutterTexture from GNOME Shell, rendering this optimization
useless. Instead, actors now may have a ClutterImage set as
their content, that can be used instead.
Replace the check for ClutterTexture with a check for ClutterImage,
and use the texture of the image when it is available.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/371
The Magnifier class uses a small subtree of actors to track the
current cursor's position and sprite. Specifically, it uses the
deprecated ClutterTexture to paint the cursor sprites.
Add a new, very simple ClutterContent implementation to track the
cursor sprite, and replace the ClutterTexture by a ClutterActor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/371
This drops usage of Gtk/X11, replacing it with code that is dependent
of the Clutter backend in use. Another positive side effect is that
the keymap state will now be correct on wayland, since there were no
guarantees that X11 key state would reflect the current reality.
https://bugzilla.gnome.org/show_bug.cgi?id=762881
This is an expensive operation that is best avoided in the main loop. Given
the call doesn't care much about returning error or status, it can just
be made async within.
Every operation on a given file will be destructive wrt previous
operations on the same file, so we just cancel any pending operation on
it before batching the current one.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/815
The last patch in the series, this one adapts StShadowHelper
to received a CoglFramebuffer. This is where we first touch
JavaScript with Cogl types, and as such, it depends on the
latest Mutter. Earlier versions of Mutter didn't have its
Mutter-Clutter GIR to generate types for various Cogl types.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
Same case of the previous patch; _st_paint_shadow_with_opacity()
uses cogl_get_draw_framebuffer(), and this patch makes it receive
a CoglFramebuffer as a parameter instead.
The cautious reader might notice that this commit apparently goes
against the long-term goal, for it introduces more instances of
cogl_get_draw_framebuffer(). This is not wrong, but these introduced
ones will be removed later on, when ClutterActor.paint() receives
a CoglFramebuffer as a parameter instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
This is in preparation for a future where only explicit frambuffer
APIs are available, i.e., cogl_get_draw_framebuffer() does not
exist.
There is absolutely no functional changes in this patch (nor the
following ones in this series), only rearrangements so that various
functions receive a CoglFramebuffer instead of using the draw
framebuffer.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
This was called here just to end up emitting ::installed-changed,
which would trigger other g_app_info_get_all() calls. Cache it here
so it may be reused later on.
Handling those events is neccessary if a touch event that pressed down a
button turns out to be a gesture. In this case the button should be
released without emitting the clicked signal.
After loading the GdkPixbuf, StTextureCache unconditionally
creates a ClutterImage and, if it's not in the cache, add
it to the cache. That's a waste of resources when the image
is already committed to the texture cache.
Fix that by reusing the ClutterImage of the cache if it is
already there; otherwise, create a new ClutterImage as we
were previously doing.
ClutterTexture is a deprecated class that is simultaneously
an actor, and the content of the actor. Clutter's new model
is to separate painting (via ClutterContent) from actors.
Currently, StTextureCache relies on ClutterTexture to store
the loaded textures. This not only does not match the latest
practices of Clutter, but also generates various compile-time
warnings.
Port StTextureCache to store ClutterImages instead of storing
ClutterTextures. ClutterImage exposes the internal CoglTexture,
so no helpers are needed to match the current StTextureCache
API. Aspect ratio was dropped, but from my testing, it doesn't
change anything.
All callers have been updated to use MetaSoundPlayer. This drops direct
usage of libcanberra-gtk, and the X11 connection indirectly. One thing
worth noting is that we pass less metadata (eg. event x/y that might be
used for surrounding effects). This was all largely unused, so the
MetaSoundPlayer was made simpler.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/327
When computing the effective border color, we operate on colors with
premultiplied alpha to simplify the calculations, then unpremultiply
the result. However we miss a bounds check in the last check, so any
color component can overflow the allowed maximum of 0xff and shift the
result in unexpected ways.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/305
If the actor is not on the stage yet (i.e. does not have a theme
node), but has a paint state cached, we currently fail to invalidate
it, which will lead to the actor painting with old contents once it
gets onto the stage.
This commit fixes the issue by changing our invalidation strategy;
previously we were looking at the widget's own theme node to determine
if it should be invalidated or not.
Now we look at the theme nodes of our cached paint states. When the
widget is mapped on stage, those are the same as the widget's own
theme node, but when the widget is not on the stage, we'll still be
able to invalidate them.
As part of this, we move the invalidation API to StThemeNodePaintState,
which is a more natural place for our use case.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/314
In X11, pointer emulated touch events are replicated with normal PRESS, RELEASE
pair events which are generated by the server. Thus for a single tap we get:
- TOUCH_BEGIN -> TOUCH_END, PRESS -> RELEASE
This will cause st-button to send two "clicked" signals, instead of just one,
breaking extensions (like dash-to-dock) that show buttons in the main stage
which will be checked two times or that will receive the same signal two times.
Back in the day, there was a proposed system of tracking apps in a
specific context.
The inspiration was that you may have used apps in multiple modes:
Firefox may have been used in both "Programmer Reference" and
"Kitten Videos" contexts. Early user response to the feedback wasn't
too positive - context switching is something that humans have trouble
doing implicitly, let alone explicitly. The old codebase still has a
few remnants of this around; let's finally put them to rest.
Note that we still write out a dummy context tag to the XML file - old
versions of the shell will flat out crash if you don't have one of those
in there, so just leave it in for compatibility sake.
https://bugzilla.gnome.org/show_bug.cgi?id=673767
cogl_texture_new() is used in a few places in GNOME Shell, but
it's a deprecated Cogl function. The replacement is the less
verbose cogl_texture_2d_new_with_size(), that is very much a
straightforward replacement.
Remove the few places where this function is used, replacing
it by the CoglTexture2d counterpart.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/287
StTextureCache installs file monitors that invalidate caches when
contents of the underlying file change.
At the moment, the cache uses the Gio.FileMonitorEvent.CHANGED event
type to make that determination.
However, that is suboptimal for at least two reasons:
- while a file is being written to disk, many CHANGED events will be
emitted in sequence. That will cause needless cache invalidations,
and we will risk loading the file before it's fully loaded.
- if an existing file is replaced, e.g. with g_file_replace(), we may
not get a CHANGED event but a CREATED one instead, so the cache ends
up never getting invalidated.
The good news is that in both of those cases GFileMonitor will send a
CHANGES_DONE_HINT event after changes have settled, or after the file
is replaced.
This commit fixes both cases by switching from the CHANGED event to
CHANGES_DONE_HINT to determine that a file has in fact changed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/286
If the initialization fails for some reason, for example by
running 'gnome-shell --replace', we should not crash because
of an attempt of unregistering an unregistered agent handle.
Fix that by checking if the handle is not NULL before calling
the unregistering routines.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/66
According to Clutter documentation, "[…] actors implementing the
ClutterContainer interface should override the default implementation
of the class handler of this signal and call clutter_actor_destroy()
on their children."
StBin was doing that in GObject:dispose() instead. Move the child
destruction to a new ClutterActor:destroy() vfunc override.
StBoxLayout implements StScrollable, which, semantically, means that
the StBoxLayout size may not match the minimum size reported by the
layout manager. In this specific case, the layout manager by is a
ClutterBoxLayout by default. For example:
+--------------+
| Viewport |
+------+--------------+-----------------+
| | | |
| | | Content |
| | | |
+------+--------------+-----------------+
| |
+--------------+
So, assuming that:
- ContentSize = the minimum size of the content;
- ViewportSize = the allocated size of the viewport;
When allocating StBoxLayout, it must assume ViewportSize, but must
pass ContentSize to the layout manager. That way, the children of
StBoxLayout are correctly placed within it, even if it's bigger than
ViewportSize.
And here's the problem: right now, StBoxLayout assumes ViewportSize
AND also passes it to layout manager. Commit 77c4c6b6d specifically
exposed this bug by relying entirely on StBoxLayout to arrange the
app and window icons.
Fix that by using ViewportSize to allocate StBoxLayout itself, but
passing ContentSize to the layout manager.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/153
gjs now relies entirely on introspection data to determine parent
types and implemented interfaces, so in order to have all methods
and properties resolve correctly, we must include the corresponding
GIRs of all types used.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/574
There's no relation between a window being hidden from overview/taskbars
and a window not being closable - currently we effectively disable the
fallback quit action for any application with open transients, which
simply doesn't make sense.
Instead, only exclude windows for which the close action has been
explicitly disabled.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/217
Using a single resource file for all JS sources saves a couple of
build system instructions, but has some serious downsides:
- bundling the entire shell code with the tools blows
up their size unnecessarily
- the tools are rebuilt unnecessarily for any shell
code change
Autotools was painful enough to let this slip, but with meson we
don't have any excuses - using the actual dependencies speeds up
the build a tiny bit and reduces the tools' sizes from over 2M
to about 50k.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/192
Simply reusing the same dependencies as gnome-shell itself not only
means that we link tons of stuff unnecessarily, but also that we
have to do the whole mutter rpath dance for nothing. Just use the
dependencies those executables actually need for a nice cleanup.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/192
We need this in the main gnome-shell executable in order to locate
the private Shell and St typelibs, but those aren't useful or even
usable in the extension-prefs/portal helper tools.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/192
GSettings now recognizes per-desktop overrides that can be used
to change schemas' default values for a particular desktop. This
is not entirely unlike our existing custom override mechanism in
mutter, except that it is not limited to keys in org.gnome.mutter,
and it doesn't require a separate schema - the latter means that
we (and gnome-teak-tool) no longer have to figure out the correct
schema for the current login session and just use the original one.
https://bugzilla.gnome.org/show_bug.cgi?id=786496
Add a debug command (to be executed manually via Alt+F2) to check
that all of gnome-shell's file descriptors have the CLOEXEC flag set.
This is important so that internal file descriptors do not get passed
to apps when they are launched.
It prints a warning message for every fd that does not have the flag set.
fdwalk() is used from the standard library if available (it is not
available in glibc), otherwise we use the same implementation as glib
has internally.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/132
When the amount of free memory on the system is somewhat low, gnome-shell
will sometimes fail to launch apps, reporting the error:
fork(): Cannot allocate memory
fork() is failing here because while cloning the process virtual address
space, Linux worries that the thread being forked may end up COWing the
entire address space of the parent process (gnome-shell, which is
memory-hungry), and there is not enough free memory to permit that to
happen. This check is somewhat irrelevant because we are only forking
to immediately exec(), which will discard the whole virtual address
space anyway.
This issue can be avoided by using a new optimized gspawn codepath in
the latest glib development version, which uses posix_spawn() internally.
For the optimized codepath to be used, we must not pass a child_setup
function, so the the file descriptor management is reimplemented here
using new glib API to pass fds to the child process. The old API will
continue to be used on older glib versions.
We must also change the spawn flags for this code path to be hit.
I checked that gnome-shell's open file descriptors are all CLOEXEC
so using G_SPAWN_LEAVE_DESCRIPTORS_OPEN should be safe.
This will result in more resilient app launching when memory is low,
since the optimized spawn path avoids cloning the virtual address
space of the parent process (gnome-shell) and avoids the irrelevant
memory overcommit check.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/132
While can_open_new_window() uses some elaborate heuristics to predict
whether an application can open multiple windows, open_new_window()
will always simply relaunch the application. This is often the best
we can do, but when an application provides a "new-window" action in
its .desktop file or on the bus, it is much more likely to work as
expected than blindly activating the app and hoping for a particular
behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=756844
Graphical applications like GIMP or GIMP allow picking colors from
any location on-screen. In order to keep supporting this feature
on wayland and in sandboxed apps, we will expose an appropriate
method in the Screenshot interface, so first add a corresponding
method to ShellScreenshot.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/286
A custom callback type is more convenient, but only as long as no
other callback type is required. We are about to add functionality
that does not return the filename to a screenshot saved on disk, so
prepare for that by moving to GIO's generic async callback pattern.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/286
So that we can be started by systemd --user, instead of gnome-session.
There are three units:
- gnome-shell.service: Start gnome-shell itself.
- gnome-shell-x11.target, gnome-shell-wayland.target: Sync points for
units that need to care if x11 or wayland is in use.
gnome-settings-daemon will use these, for example.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/138
All adjustment setter functions take good care of avoiding emission of
notify:: when it's not needed. The set_property() implementation already
calls into the setter functions, so mark the properties as EXPLICITY_NOTIFY
in order to optimize notify:: emission away through g_object_set (rather
common from JS code).
The actor allocation doesn't change per-se, but apply_transform()
will practically transform it. In order to have the paint volume
update accordingly, queue a relayout.
The default get_paint_volume() implementation will do the union
of children, and the child ClutterText paint volume may expand
beyond StEntry size when text overflows.
We actually want all content to be clipped to the StEntry, so
implement get_paint_volume() and tell it so.
And constrain it in StScrollView instead (instead of falling back to an
infinite paint volume, as the actor as paint/pick impls, but no
corresponding get_paint_volume one).
Fixes artifacts with the AppView (and possibly other places) when paint
volumes are aggressively cached.
Remove any usage of MetaScreen, as it has been removed from libmutter
in the API version 3. The corresponding functionality has been moved
into three different places: MetaDisplay, MetaX11Display (for X11
specific functionality) and MetaWorkspaceManager.
https://bugzilla.gnome.org/show_bug.cgi?id=759538
The default keyed_surface is meant to handle CoglTextures thus we can't
add cairo surfaces to it, as the DestroyNotify function won't handle them.
Then the quicker way is to just add another Hash table for handling
such types of textures, with proper destroy function.
This might cause a crash when cleaning up the cache as the hash table has
cogl_object_unref as DestroyNotify function but that assumes that
the passed object is a valid CoglObject.
Fixes: #210
The instance is owned by the actor (being its child), and thus when the
disposal happens for the parent the text is disposed too, thus it's just
safer to nullify its reference so that we won't try to access to invalid
objects later, and this might be the case since the JS objects could be kept
around until they aren't finalized.
https://bugzilla.gnome.org/show_bug.cgi?id=788931
The gnome-shell-calendar-server calls to refresh queries even when it
has no time range set, which results in:
a) waste of resources (for example after login),
b) many runtime warnings in the journalctl log, related to
incorrect time range being used.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/244
While it is theoretically fine to run --perf=hwtest without passing --hwtest,
the test will hang in this case because it fails to start gedit. Always append
Gedit to the default value for --extra-filter when running the "hwtest" test
to make it work fine without --hwtest.
Call _st_set_text_from_style() when updating the entry's style, so
that CSS style properties such as text-decoration or letter-spacing
are applied over the internal ClutterText instance.
If an actor is pending a relayout when get_allocation_box() is called,
the method forces an allocation update. In case of StWidget, this might
then result in a style update and a consecutive invalidation of the
shadow spec.
A helper method that invalidates one of its parameters as a side effect
(and by extension its return value as well) is most unexpected, so cur-
rently _st_create_shadow_pipeline_from_actor() poses an easy trap to
callers to run into.
Remove that trap by calling get_size()/get_position() instead, which
don't have the unintended side effect - it is still a good idea to fix
callers who were running into this to not waste resources on creating
shadows that are invalidated before the next paint, but throwing un-
defined behavior at them is harsh ...
https://bugzilla.gnome.org/show_bug.cgi?id=788908
The imagedir and userdatadir variables are not fetched from
constants/environment but created with g_strdup*/g_build*. Acknowledge that
and also free the strings in finalize.
Whenever a new cursor image is loaded also save it's hot x/y
coordinates. The drawing code already respects these values, however
they were never set. This change will place the cursor image at the
correct location as seen on screen. shell-screenshot.c served as
reference.
https://bugzilla.gnome.org/show_bug.cgi?id=792860
The st_button_release() call wouldn't happen because StButton does not
set priv->button_mask on touch events. And if we make it called, we can't
try to unset the device grab at the end of the function, as device/sequence
are unset earlier on.
After we receive one of the tracked signals, in case we get stuck inside
the gjs_dumpstack () call, we use an alarm to raise the previously emitted
signal, however without using SA_NODEFER, the raise inside the alarm handler
will be ignored.
To avoid to handle new signals caused by the handler calls, once we get the
first signal, we just ignore them all as they could only lead to dirty traces.
Also, cleaning up a bit the code, and disabling the shell log handler
in dump_gjs_stack_alarm_sigaction since this might lead to a new
gjs_dumpstack () request.
https://bugzilla.gnome.org/show_bug.cgi?id=789237
In order to debug issues triggered by JS code we might need to
see the stack of it, this is not normally visible in static stack traces,
thus we need to call gjs_dumpstack () before dying the process.
Intercepting signals SIGABRT, SIGTRAP (needed for catching fatal glib
errors) SIGFPE and SIGIOT by default, while introducing a new
'backtrace-segfaults' flag for the SHELL_DEBUG environment variable to
do the same on SIGSEGV and SIGBUS (this is a precaution to avoid that we
corrupt the stack for automatic errors trackers).
In any case after dumping the stack we raise the signal again, in order
to make the system aware of it.
https://bugzilla.gnome.org/show_bug.cgi?id=789237
Similar to what it's done in _shell_app_add_window(), rely on calling
shell_app_sync_running_state() when removing windows too, to avoid
transitioning to STOPPED while it's still in the STARTING state.
This makes the logic compliant with the startup notification spec and
prevents stopping an application too early if it has a splash screen
that has been closed before the application's main window is shown.
https://bugzilla.gnome.org/show_bug.cgi?id=787905
Meson now warns when specifying the rpath in linker flags instead
of using the newly added build_rpath option - now that we already
depend on the latest release, there's no reason anyway to not use
the nicer syntax.
https://bugzilla.gnome.org/show_bug.cgi?id=786343
When creating a shadow for a ClutterTexture, we currently use the
underlying CoglTexture directly instead of rendering the actor to
an offscreen buffer. This assumes that the CoglTexture is directly
suitable as shadow source, which isn't necessarily the case - it
may have a very different size than what is shown and scaled up or
down by the hardware. In that case we end up with a scaled shadow
texture as well, which messes up the desired blur effect - the
result will be too light when scaling up, or too sharp when scaling
down. To fix this, only take the shortcut when a ClutterTexture's
underlying texture has the correct size and fall back to offscreen
rendering otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=788039
If a tray icon gets a mapped and unmapped and the mapped again
in quick succession, we can end up with multiple handlers
listening for window creation events.
This commit tries to guard against that by only listening for
window-created events when we don't know the actor associated
with the icon.
https://bugzilla.gnome.org/show_bug.cgi?id=787361
Unlike pango_font_description_from_string(),
pango_font_description_set_family() requires a already properly
formatted font family string. The proper format is a comma seperated
list of font families, but we generated a "comma space" separated list.
Passing a incorrectly formatted font family string to pango seems to
cause wierd issues, where the wrong font is sometimes selected.
For example, this fixes a font selection issue on zh_TW.UTF-8 locale for
chinese characters, where previously the "Droid Sans" font was selected
instead of "Source Han Sans TW" even though fontconfig had placed
"Source Han Sans TW" before "Droid Sans".
https://bugzilla.gnome.org/show_bug.cgi?id=786868
The theme widget passed to shell_tray_manager_manager_screen() is simply
a means to receive style information. There is nothing which ties the two
object's life cycles together, so it is entirely possible for the tray to
be finalized with the widget still around - we shouldn't try to update the
stale object on widget style changes, so make sure we properly disconnect
the signal handler.
https://bugzilla.gnome.org/show_bug.cgi?id=786526
Compiling the generated source for each consumer of the dependency
means we end up trying to register the enum types multiple times,
resulting in a fatal failure on startup. Luckily code outside libst
itself only depends on the header, which doesn't cause those issues.
st_built_sources contains the source and header generated by mkenums,
not any other generated sources. Clarify that in the name, as we are
about to use source and header separately.
We cannot rely on any build order, except the one we specify ourselves.
St depends on various generated files; other targets depend on those
files existing, so they can be included. There is no direct relationship
between targets and files, unless we declare a dependency, using the
Meson declare_dependency() constructor — which allows us to replace the
various `link_with` directives with the more appropriate `dependencies`
one, and also allows us to specify sources that must exist by the time
we build those targets.
In parallel builds we may end up with st-enum-types.c being built inside
separate targets outside of src/st which may not have the ST_COMPILATION
pre-processor symbol defined. For this reason, we need to define it
ourselves in the source file, before including other headers, to avoid
the single-include guard.
This is not strictly necessary when linking the shell with DT_RPATH as
the runtime paths will be extracted from the introspected libraries and
used from gobject introspection to find them when loading them based on
the typelib files, but when linking with DT_RUNPATH, as it's the case
for some linkers (e.g. ld.gold, or ld.bfd in some distros like Debian).
By explicitly prepending this directory as a library path for GIR, we're
making sure that the wrapped shared objects installed in Mutter's and
GNOME Shell's private directories can be found in all cases.
https://bugzilla.gnome.org/show_bug.cgi?id=777519
Meson is on track to replace autotools as the build system of choice,
so support it in addition to autotools. If all goes well, we'll
eventually be able to drop the latter ...
https://bugzilla.gnome.org/show_bug.cgi?id=783229
When using the meson build system, gvc will be built as a subproject.
As meson restricts submodules to a subprojects/ directory in the
source tree root, move the submodule there.
https://bugzilla.gnome.org/show_bug.cgi?id=783229
libmutter-clutter fixed stage capturing when views are scaled, and for
that to work properly when compositing the screenshot, we need to deal
with the cairo device scale here too.
https://bugzilla.gnome.org/show_bug.cgi?id=765011
Even though the API documentation doesn't say so, the underlying
Cogl texture of a ClutterTexture may be unset, so check for that
case to avoid a runtime warning.
https://bugzilla.gnome.org/show_bug.cgi?id=784353
Otherwise UTC is used which results in a different interpretation of
floating time events. This then could lead to a mismatch with events
generated e_cal_client_generate_instances_sync() which always uses the
default timezone. Such a mismatch would then cause constant invalidation
and reloading.
https://bugzilla.gnome.org/show_bug.cgi?id=781950
This allows a full ClutterActor to be used as hint in the entry, instead
of a simple string.
The string case has been now re-implemented on top of the hint actor.
https://bugzilla.gnome.org/show_bug.cgi?id=783484
This is the same as the previous commit, but for StEntry.
We don't have any need to explicitly destroy this actor in our dispose
implementation, and doing so breaks the assumption that we can access
the clutter_text from within destroy.
https://bugzilla.gnome.org/show_bug.cgi?id=783483
There's no need to explicitly destroy the ClutterText actor inside the
label; doing so is actually harmful, as it will break the normal
reference cycle between container and children.
As StLabel doesn't hold any extra reference to the ClutterText actor and
just uses clutter_actor_add_actor() to add it to itself, let the normal
container dispose cycle run to dispose of the reference.
https://bugzilla.gnome.org/show_bug.cgi?id=783483
The static library was split out to avoid duplicate compilation
of mutter-independent libgnome-shell sources when we had a
wayland/non-wayland split. With the separate libmutter-wayland
library long gone, there's no reason to make the build more
complicated than it needs to be, so fold libgnome-shell-base
back into the regular libgnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=783206
Most of the libsecret API was declared stable in 0.18 and the stable API
now provides everything we need, so switch from libsecret-unstable to
libsecret-1.
https://bugzilla.gnome.org/show_bug.cgi?id=782637
Commit ffe4eaf00d broke the handler by fetching the instance private
from the wrong actor - as we don't use the ::primary-icon-clicked signal,
and the ::secondary-icon-clicked signal still works by accident, nobody
noticed until now ...
https://bugzilla.gnome.org/show_bug.cgi?id=782190
When extracting the sliced image, the GTask grants data ownership on
g_task_propagate_*, so the pixbuf list must be properly freed. On async
load, we just left a dangling reference when returning on the async
task.
https://bugzilla.gnome.org/show_bug.cgi?id=642652
st_theme_node_get_border_image() may return %NULL, leading to a
segfault in st_border_image_get_file() when glib is compiled with
G_DISABLE_CHECKS.
https://bugzilla.gnome.org/show_bug.cgi?id=780381
The built-in telepathy integration is far less prominent than it
used to be, and doesn't really justify a link time dependency to
send debug message over D-Bus.
https://bugzilla.gnome.org/show_bug.cgi?id=771721
We are still using DBUS_NAME_FLAG_REPLACE_EXISTING from dbus-glib
in some places (whose headers are drawn in via telepathy-glib).
As both GIO and dbus-glib use the values that will end up being
sent on the bus, the define and enum value are interchangeable,
but it's clearly better to consistently use the library that is
explicitly included.
https://bugzilla.gnome.org/show_bug.cgi?id=771721
Rename the signals which have been used to handle XDnd events to more inclusive
ones. So that these signals can be used to handle the DnD events in Wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=765003
Mutter now provides versioned libraries and pkg-config files, meaning
an application using libmutter and friends need to depend on a specific
version of the API.
https://bugzilla.gnome.org/show_bug.cgi?id=777317
Solaris 11.3.5 and later have a Linux-compatible implementation of
/proc/self/cmdline, so the code to use it can be enabled in gnome-shell
on Solaris - if used on an older OS, it simply fails to open the file
and returns without doing anything, just as the code did before enabling
this.
https://bugzilla.gnome.org/show_bug.cgi?id=776199
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
It isn't useful to move the keyboard focus to a hidden actor, so
only include visible actors in the focus chain - this is in fact
the documented behavior of st_widget_get_focus_chain(), so having
the default implementation return all children has always been
unexpected.
https://bugzilla.gnome.org/show_bug.cgi?id=778158
This fixes the shell not picking updates to the contents of the underlying
.desktop files for application launchers, or when a .desktop file is
overriden by a user-installed one under ~/.local/share/applications
https://bugzilla.gnome.org/show_bug.cgi?id=773636
After having embedded a Gtk window, we start to listen for the
corresponding MetaWindow to know when it has been mapped by the
compositor. If the embedder does not realize the window immediately,
and some other window is created and mapped before the embedder
realizes the window, we would prior to this patch try to dereference
the not created GdkWindow. Fix this by NULL checking the GdkWindow
before dereferencing. We will never miss the needed MetaWindow creation
since it can not have been mapped have it not yet been realized.
https://bugzilla.gnome.org/show_bug.cgi?id=776130
This will be required in the upcoming version of GJS.
The reference count on ShellGlobal is 2 at this point, because JS holds a
reference due to the "window.global = Shell.Global.get()" line in
ui/environment.js. Therefore, destroy the GjsContext first, then unref
the ShellGlobal object.
Cleaning up ShellGlobal was previously only enabled behind a debug
environment variable, but it should be required now.
https://bugzilla.gnome.org/show_bug.cgi?id=775374
Sliced images are loaded into a group actor with one child actor
per slice. In case loading the image fails, we currently quietly
return the empty group actor, which makes diagnosing problems
unnecessarily hard - just be a bit more verbose on failure.
https://bugzilla.gnome.org/show_bug.cgi?id=774805
This might be a good fit for extension developers: With
this option one doesn't need to restart the whole Shell
in order to see their changes in effect.
https://bugzilla.gnome.org/show_bug.cgi?id=772593
And adapt existing callers to the new API. This will allow us to
implement a way to launch applications on the discrete GPU for systems
where an "Optimus" system exists.
https://bugzilla.gnome.org/show_bug.cgi?id=773117
You can define a new importer object by importing a subdirectory in GJS.
This is undocumented, but it is likely to at least hold until the whole
thing moves to ES6 modules, after which we'll be able to do this purely
in JS with Reflect.Loader.
Since this was the only thing the ShellJS library did, we can remove it
altogether.
This allows us to discontinue use of the gjs-internals-1.0 embedder API.
https://bugzilla.gnome.org/show_bug.cgi?id=772386
Our window matching currently fails frequently with Flatpak
applications, as one of the primary hints used to link windows
with .desktop files - the WM_CLASS - no longer matches when
flatpak renames the exported .desktop file. Worse, as Flatpak
applications are run in their own PID namespace, different
apps frequently share a common _NET_WM_PID, resulting in
unrelated apps being grouped together by one of the fallback
paths. To match Flatpak applications reliably, take the newly
exported Flatpak ID into account.
https://bugzilla.gnome.org/show_bug.cgi?id=772615
Other windows like the mutter Xwayland selection bridges might deal with
the clipboard, which would result in events visible on st-clipboard event
filters.
In order to avoid unintended results, ignore events that are not meant for
the clipboard window.
https://bugzilla.gnome.org/show_bug.cgi?id=760745
Mutter may capture the screen in multiple capture regions. If this is
done, take these images and composite them onto one large image, which
is then passed into the gstreamer source.
When clutter gives us multiple captures (multiple cairo_surface_t's),
composite them into one large image and use that as final screenshot
result. This makes screenshooting work when mutter uses multiple views.
https://bugzilla.gnome.org/show_bug.cgi?id=770128
