We can't use the X11 stage window, if clutter is not using the X11
backend (and even if it was, it would be bogus when the xwayland
server is not the one clutter is talking to). Instead, we introduce
the concept of "focus type", which we use to differentiate the
various meanings of None in the focus_xwindow field.
https://bugzilla.gnome.org/show_bug.cgi?id=706364
Remove grab window and cursor from the API, and just grab always
on the stage window with no cursor.
This is mainly to remove the X11 usage in the public API, in preparation
for implementing this in wayland.
https://bugzilla.gnome.org/show_bug.cgi?id=705917
Using out-of-band notifications from the wayland protocol or from
X is racy, in that the client could ask for the new resources before
we have them.
Instead, with a signal, we are sure that when the client asks for
it, it will get the right values.
https://bugzilla.gnome.org/show_bug.cgi?id=706382
Under X, we need to use XFixes to watch the cursor changing, while
on wayland, we're in charge of setting and painting the cursor.
MetaCursorTracker provides the abstraction layer for gnome-shell,
which can thus drop ShellXFixesCursor. In the future, it may grow
the ability to watch for pointer position too, especially if
CursorEvents are added to the next version of XInput2, and thus
it would also replace the PointerWatcher we use for gnome-shell's
magnifier.
https://bugzilla.gnome.org/show_bug.cgi?id=705911
The value passed to XRRCrtcSetGamma must be allocated with
XRRAllocGamma (because it relies on the locations of green and blue),
otherwise garbage is sent on the wire.
https://bugzilla.gnome.org/show_bug.cgi?id=706231
We were relying on the XRandR events from the X server to update
the configuration, but we were calling meta_monitor_config_update_current()
immediately after, so the MonitorConfig would be updated with the
old configuration (and we would save that to disk!)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
First disable CRTCs that should be off in the new configuration,
then resize the framebuffer, then enable the new CRTCs.
If we don't do that, and we're making the screen smaller, X complains
with a BadMatch.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add "edid-file", if we have one (in the KMS case, where we can point
people to the right sysfs file), or "edid" with inline data.
These are needed by colord to build the default ICC profile for
uncalibrated displays.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of keeping a forest of if backend else ..., use a subclass
and virtual functions to discriminate between XRandR and the
dummy backend (which lives in the parent class togheter with the
common code)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We want to show a dialog when a display change happens from the
control center. To do so, add a new vfunc to MetaPlugin and
call it when a configuration change is requested via DBus.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add GetCrtcGamma() and SetCrtcGamma(), that wrap the similarly
named XRandR API. These are used by GnomeRR inside the color
plugin of the control center (and may go away if the color
plugin decides to do something different under wayland)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
GnomeRR needs that too.
The backlight is exported as a normalized 0-100 value, or -1 if not
supported. Clamping to HW limits is handled by the backend.
Changing backlight uses a different method call, to avoid recomputing
the full display configuration every time the user presses the
backlight keys.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
The default configuration is extended, which is only possible
if there are as many CRTCs as outputs, so make sure that's true.
Also, add more and bigger modes, so that different sizes will
be chosen for the three outputs.
A nice side effect of this is that with a real 1920x1080 + 1600x900
layout, if you disable the VGA you get a stage that matches the
screen size, which triggers the legacy fullscreen path in the
outside mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Use a private output property to store if the output is in
presentation mode or not, so that this information is not lost
after the configuration read back from the server.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Ripped off libgnome-desktop, trimming the parts that checked
that the configuration was plausible, as that should be done
in gnome-control-center before asking mutter for a change.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a new object, MetaMonitorConfig, that takes care of converting
between the logical configurations stored in monitors.xml and
the HW resources exposed by MonitorManager.
This commit includes loading and saving of configurations, but
still missing is the actual CRTC assignments and a default
configuration when none is found in the file.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Read the current transform from XRandR, and expose the transforms
that are really supported on the bus.
The dummy backend now advertises all transforms, since it doesn't
actually apply them.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Instead of a full white background, make one with a random color.
This way the different "monitors" are visible and it's easier
to debug the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Add a number of dummy outputs and modes to the dummy backend,
and implement the writing bits.
The only visible effect is that you can change the screen size,
which resizes the output window.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Now MonitorManager does its own handling of XRandR events, which
means we no longer handle ConfigureNotify on the root window.
MetaScreen reacts to MonitorManager::monitor-changed and updates
its internal state, including the new size.
This paves the way for doing display configuration using only
the dummy backend, which would allow testing wl_output interfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Implement ApplyConfiguration in terms of XRandR calls.
Error checking is done before actually committing the configuration.
If mutter is using one of the other monitor config backends, an
error is reported and nothing happens.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Turns out that even if two outputs say that they can be controlled
by a given CRTC, you can't configure them in the same CRTC unless
they are marked as "possible clones" one of the other.
This can further restrict the configuration options, so we need
to expose this limitation in the DBus API.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
This new interface will be used by the control center and possibly
the settings daemon to configure the screens. It is designed to
resemble a simplified XRandR, while still exposing all the quirks
of the hardware, so that the panel can limit the user choices
appropriately.
To do so, MetaMonitorMode needs to track CRTCs, outputs and modes,
so the low level objects have been decoupled from the high-level
MetaMonitorInfo, which is used by core and API and offers a simplified
view of HW, that hides away the details of what is cloned and how.
This is still not efficient as it should be, because on every
HW change we drop all data structures and rebuild them from scratch
(which is not expensive because there aren't many of them, but
at least in the XRandR path it involves a few sync X calls)
https://bugzilla.gnome.org/show_bug.cgi?id=705670
Consolidate all places that deal with output configuration in
MetaScreen, which gets it either from XRandR or from a dummy static configuration.
We still need to read the Xinerama config, even when running xwayland,
because we need the indices for _NET_WM_FULLSCREEN_MONITORS, but
now we do it only when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=705670
We need to use g_signal_connect_object(), rather than g_signal_connect(),
because the window actor can be destroyed before the window emits
the final notify::appears-focused inside unmanage, if the plugin
decides that it doesn't want to animate the destruction (which
happens with dialogs and the default plugin)
https://bugzilla.gnome.org/show_bug.cgi?id=706207
We need to use g_signal_connect_object(), rather than g_signal_connect(),
because the window actor can be destroyed before the window emits
the final notify::appears-focused inside unmanage, if the plugin
decides that it doesn't want to animate the destruction (which
happens with dialogs and the default plugin)
https://bugzilla.gnome.org/show_bug.cgi?id=706207
It is a very bad idea in a glib program (especially one heavily
using glib child watching facilities, like gnome-shell) to handle
SIGCHLD. While we're there, let's also use g_spawn_async, which
solves some malloc-after-fork problems and makes the code generally
cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=705816
The current surface refers to the surface right below the pointer
(according to the pick performed by clutter), while the focus surface
is the one receiving events. They can be out of sync in case of
grabs, in which case we should keep trying to focus the current
surface.
https://bugzilla.gnome.org/show_bug.cgi?id=706077
The previous code was leaving focus fields dirty in MetaWaylandPointer
and MetaWaylandKeyboard at time (which could crash the X server
because of invalid object IDs)
The new code is more tighly integrated in the normal X11 code
for handling keyboard focus (meaning that the core idea of input
focus is also correct now), so that meta_window_unmanage() can
do the right thing. As a side benefit, clicking on wayland clients
now unfocus X11 clients.
For the mouse focus, we need to clear the surface pointer when
the metawindowactor is destroyed (even if the actual actor is
kept alive for effects), so that a repick finds a different pointer
focus.
https://bugzilla.gnome.org/show_bug.cgi?id=705859
Remove window_surfaces, as the FIXME asks for. We don't need it
because we can obtain the surface from the MetaWindow, and
follow the wayland compositor path for both types of clients.
https://bugzilla.gnome.org/show_bug.cgi?id=705818
When running Mutter under Cogl's KMS backend no cursor will be
provided so instead this makes it so the cursor will be painted as a
CoglTexture that gets moved in response to mouse motion events. The
painting is done in a subclass of ClutterStage so that we can
guarantee that the cursor will be painted on top of everything else.
This patch adds support for the set_cursor method on the pointer
interface so that clients can change the cursor image.
The set_pointer method sets a surface and a hotspot position to use
for the cursor image. The surface's buffer is converted to a
CoglTexture and attached to a pipeline to paint directly via Cogl. If
a new buffer is attached to the surface the image will be updated. The
cursor reverts back to the default image whenever to the pointer focus
is moved off of any surface.
The image for the pointer is taken from X. It gets installed into
a fixed data location for mutter.
This copies the basic input support from the Clayland demo compositor.
It adds a basic wl_seat implementation which can convert Clutter mouse
events to Wayland events. For this to work all of the wayland surface
actors need to be made reactive.
The wayland keyboard input focus surface is updated whenever Mutter
sees a FocusIn event so that it will stay in synch with whatever
surface Mutter wants as the focus. Wayland surfaces don't get this
event so for now it will just give them focus whenever they are
clicked as a hack to test the code.
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This breaks down the assumptions in stack-tracker.c and stack.c that
Mutter is only stacking X windows.
The stack tracker now tracks windows using a MetaStackWindow structure
which is a union with a type member so that X windows can be
distinguished from Wayland windows.
Some notable changes are:
Queued stack tracker operations that affect Wayland windows will not be
associated with an X serial number.
If an operation only affects a Wayland window and there are no queued
stack tracker operations ("unvalidated predictions") then the operation
is applied immediately since there is no server involved with changing
the stacking for Wayland windows.
The stack tracker can no longer respond to X events by turning them into
stack operations and discarding the predicted operations made prior to
that event because operations based on X events don't know anything
about the stacking of Wayland windows.
Instead of discarding old predictions the new approach is to trust the
predictions but whenever we receive an event from the server that
affects stacking we cross-reference with the predicted stack and check
for consistency. So e.g. if we have an event that says ADD window A then
we apply the predictions (up to the serial for that event) and verify
the predicted state includes a window A. Similarly if an event says
RAISE_ABOVE(B, C) we can apply the predictions (up to the serial for
that event) and verify that window B is above C.
If we ever receive spurious stacking events (with a serial older than we
would expect) or find an inconsistency (some things aren't possible to
predict from the compositor) then we hit a re-synchronization code-path
that will query the X server for the full stacking order and then use
that stack to walk through our combined stack and force the X windows to
match the just queried stack but avoiding disrupting the relative
stacking of Wayland windows. This will be relatively expensive but
shouldn't be hit for compositor initiated restacking operations where
our predictions should be accurate.
The code in core/stack.c that deals with synchronizing the window stack
with the X server had to be updated quite heavily. In general the patch
avoids changing the fundamental approach being used but most of the code
did need some amount of re-factoring to consider what re-stacking
operations actually involve X or not and when we need to restack X
windows we sometimes need to search for a suitable X sibling to restack
relative too since the closest siblings may be Wayland windows.
This adds support for running mutter as a hybrid X and Wayland
compositor. It runs a headless XWayland server for X applications
that presents wayland surfaces back to mutter which mutter can then
composite.
This aims to not break Mutter's existing support for the traditional X
compositing model which means a single build of Mutter can be
distributed supporting the traditional model and the new Wayland based
compositing model.
TODO: although building with --disable-wayland has at least been tested,
I still haven't actually verified that running as a traditional
compositor isn't broken currently.
Note: At this point no input is supported
Note: multiple authors have contributed to this patch:
Authored-by: Robert Bragg <robert@linux.intel.com>
Authored-by: Neil Roberts <neil@linux.intel.com>
Authored-by: Rico Tzschichholz.
Authored-by: Giovanni Campagna <gcampagna@src.gnome.org>
This adds a --nested option to request that mutter no longer run as a
classic X compositor with an output window mapped on the X Composite
Overlay Window and also not assume it is running directly under X.
The intention is that in this mode Mutter will itself launch a headless
X server and display output will be handled by Clutter and Cogl. This
will enable running Mutter nested as an application within an X session.
This patch introduces an internal meta_is_wayland_compositor() function
as a means to condition the way mutter operates when running as a
traditional X compositor vs running as a wayland compositor where the
compositor and display server are combined into a single process.
Later we also expect to add a --kms option as another way of enabling
this wayland compositor mode that will assume full control of the
display hardware instead of running as a nested application.
This adds a --with-xwayland-path configure option that can be used to
specify the absolute path of a headless X server binary supporting
the wayland xserver protocol.
This adds a --enable-wayland configure option to enable building mutter
as a hybrid X and Wayland compositor. By default the option is disabled.
If enabled then HAVE_WAYLAND is defined for C code and as an automake
conditional.
This copies the xserver.xml wayland protocol into a protocol/ directory
since wayland support will depend on this protocol for communicating
with an xwayland X server. Copying the spec like this is consistent with
Weston so we don't need a configure option to locate an external spec.
We now track whether a window has an input shape specified via the X
Shape extension. Intersecting that with the bounding shape (as required
by the X Shape extension) we use the resulting rectangles to paint
window silhouettes when picking. As well as improving the correctness of
picking this should also be much more efficient because typically when
only picking solid rectangles then the need to actually render and issue
a read_pixels request can be optimized away and instead the picking is
done on the cpu.
GNOME Shell's actors aren't touch capable, so we need to make sure that
they get the fallback pointer emulated events for now. This fixes the top
bar and other elements not working on a touchscreen without a grab.
https://bugzilla.gnome.org/show_bug.cgi?id=697192
Some cards have 2k texture limits, which can be smaller than
commonly sized backgrounds.
One way to get around this problem is to use Cogl's "sliced texture"
feature, that transparently uses several hardware textures under the hood.
This commit changes background textures loaded from file to potentially
use slicing. Based on a patch by Jasper St. Pierre
<jstpierre@mecheye.net>.
https://bugzilla.gnome.org/show_bug.cgi?id=702283
Some cards have 2k texture limits, which can be smaller than
commonly sized backgrounds.
This commit downscales the background in this situation, so that
it won't fail to load.
https://bugzilla.gnome.org/show_bug.cgi?id=702283
Originally attached dialogs did not have a titlebar, which the code
still assumes though it hasn't been true for a while; nowadays, the
actual look of attached dialogs is controlled by the theme.
As GTK+ recently gained the ability to set custom titlebars, we need
to support attached dialogs with either full borders (WM decorations)
or border-only (GTK+ titlebar).
Just remove the left-over assumption to make it work as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=702764
We need to update window->monitor on override_redirect windows as well, other
wise they may end up with an invalid struct which triggers and assert when
meta_window_is_monitor_sized is called.
https://bugzilla.gnome.org/show_bug.cgi?id=702564
Avoid a round trip to the xserver we already have the current position
anyway. Querying from the server on every move can cause the compositor to
stall during movement.
Add new api (meta_screen_get_current_monitor_for_pos and
meta_screen_get_current_monitor_info_for_pos) that allow querying the monitor
without a roundtrip by reusing the passed in cursor position.
gnome-shell needs to know whether the stage window is focused so
it can synchronize between stage window focus and Clutter key actor
focus. Track all X windows, even those without MetaWindows, when
tracking the focus window, and add a compositor-level API to determine
when the stage is focused.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
When we set the input focus, we first set the predicted window,
and then try to process focus events. But as XI_FocusOut on the
existing window comes before XI_FocusIn on the new window, we'll
see the focus out on the old window and think the focus is going
to nothing, which makes mutter think the prediction failed.
This didn't really matter as nothing paid attention to the focus
window changing, but with gnome-shell's focus rework, we'll try
and drop keyboard focus in events like these.
Fix this by making sure that we ignore focus window changes of our
own cause when updating the focus window field, by ignoring all
focus events that have a serial the same as the focus request or
lower. Note that if mutter doens't make any requests after the
focus request, this could be racy, as another client could steal
the focus, but mutter would ignore it as the serial was the same.
Bump the serial by making a dummy ChangeProperty request to a
mutter-controlled window in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=701017
We substract one from the unredirect counter when enable_unredirect_for_screen
gets called. It is an unsigned integer so substracting one from zero (which means enable) would overflow and thus keep it peramently enabled.
This should never happen because it means there is an unmatched
enable / disable pair somewhere. So in addition to fixing it add a
warning when this case gets triggered.
https://bugzilla.gnome.org/show_bug.cgi?id=701224
Commit 4f2bb583bf changed things so that the compositor used
clutter_threads_add_repaint_func_full (CLUTTER_REPAINT_FLAGS_POST_PAINT
to get after-paint notification and send _NET_WM_FRAME_DRAWN, but this
doesn't actually work, since Clutter will already have blocked for
VBlank before calling post-paint functions.
The result is that frame synced toolkits like GTK 3.8 will normally
only be able to draw every other frame.
Since ::paint doesn't work either, a new function
clutter_stage_set_paint_callback() has been added to Clutter
(and will be included in the 1.14 branch)
https://bugzilla.gnome.org/show_bug.cgi?id=698794
We have no need for normally reported events during grabs. In fact, it
might be harmful. A plugin might grab the keyboard through
meta_begin_modal_for_plugin() and then expect events to be reported to
the grab window they provide. If meanwhile this XIGrabDevice is
issued, events might start being reported normally to one other of our
windows breaking the plugin event processing.
In particular, on an empty workspace, we set input focus to our
no_focus_window. Then, if gnome-shell calls
meta_begin_modal_for_plugin() and meta_display_freeze_keyboard(), in
that order, input events will start being reported to no_focus_window.
There are two issues with this. One is that no_focus_window isn't
selecting for XI input events and thus the server discards them
completely. But even if that is fixed, events being reported to any
window other than the one gnome-shell expects - the clutter stage
window - means that events will stop reaching it.
https://bugzilla.gnome.org/show_bug.cgi?id=701219
This will make it possible to implement input source switching in
gnome-shell using the popular modifiers-only keybinding that's
implemented on the X server through an XKB option.
https://bugzilla.gnome.org/show_bug.cgi?id=697002
We'll use this in gnome-shell to freeze the keyboard right before
switching input source and unfreeze it after that's finished so that
we don't lose any key events to the wrong input source.
https://bugzilla.gnome.org/show_bug.cgi?id=697001
If a binding is updated with a clear set of strokes (effectively
disabling it) we aren't signaling that the binding changed and thus
the previous strokes will continue to be grabbed.
This fixes that and tries to do a better effort at checking if the
binding changed or not.
https://bugzilla.gnome.org/show_bug.cgi?id=697000
gnome-shell has traditionally just called XSetInputFocus when wanting to
set the input focus to the stage window, but this might cause strange,
hard-to-reproduce bugs because of an interference with mutter's focus
prediction. Add API to allow gnome-shell to focus the stage window that
also updates mutter's internal focus prediction state.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
If an app pops up an OR window and sets input focus to it, like
Steam does, we'll think the focus window is null, causing us to
think the app is not focused.
OR windows should not be special if they get input focus, where
the input focus would be set to NULL. Instead, the window should
be marked as focused.
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Mutter previously defined display->focus_window as the window that the
server says is focused, but kept display->expected_focus_window to
indicate the window that we have requested to be focused. But it turns
out that "expected_focus_window" was almost always what we wanted.
Make MetaDisplay do a better job of tracking focus-related requests
and events, and change display->focus_window to be our best guess of
the "currently" focused window (ie, the window that will be focused at
the time when the server processes the next request we send it).
https://bugzilla.gnome.org/show_bug.cgi?id=647706
The hierarchy handling is handled in the shell by adding stuff
directly to the uiGroup, and we have a dedicated actor for
the overview there, so we don't need this anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=700735
Make it a static function for now, but this will be a private
function soon, replacing meta_window_lost_focus. This should
contain no functional changes, only cosmetic indentation changes,
so best viewed with ignorews=1 or -w or -b, you know the drill.
https://bugzilla.gnome.org/show_bug.cgi?id=647706
Clients using _NET_WM_MOVERESIZE to start a drag operation may encounter
a race condition if the user presses and releases a mouse button very
fast, getting "stuck" in a grab state. While this is easily fixed with
the user pressing the button or hitting Escape as the EWMH spec suggests,
its's still a bit of annoyance for users.
After starting a grab operation, check that the button is actually pressed
by the client, and if not, cancel the grab operation. This prevents the
stuck grab in a race-free way, although it requires an extra round-trip
to the server.
With client-side decorations becoming more popular, the use of
_NET_WM_MOVERESIZE is on the rise, thus this bug is seen more frequently
than before.
https://bugzilla.gnome.org/show_bug.cgi?id=699777
As we only had one string-array preference so far, we didn't bother
with adding a generic way to handle string-array preferences, and
just handled the preference in question explicitly. However we are
going to parse another string-array setting, so generalize the
existing code to make it reusable for that case.
https://bugzilla.gnome.org/show_bug.cgi?id=700223
g-ir-scanner will emit more warnings regarding broken GTK-Doc
syntax in the near future, which due to --warn-error being used
would break the build:
'''
ui/theme.c:1883: Warning: Meta: missing ":" at column 20:
* @tokens_p: (out) The resulting tokens
^
g-ir-scanner: compile: gcc -Wall -Wno-deprecated-declarations ...
g-ir-scanner: link: /bin/sh ../libtool --mode=link --tag=CC gcc ...
libtool: link: gcc -o /home/dieterv/gnome.org/checkout/mutter/...
<unknown>:: Fatal: Meta: warnings configured as fatal
<unknown>:: Fatal: Meta: warnings configured as fatal
make[4]: *** [Meta-3.0.gir] Error 1
'''
https://bugzilla.gnome.org/show_bug.cgi?id=699636
This essentially just moves install_corners() from the compositor, through
the core, into the UI layer where it arguably should have been anyway,
leaving behind stub functions which call through the various layers. This
removes the compositor's special knowledge of how rounded corners work,
replacing it with "ask the UI for an alpha mask".
The computation of border widths and heights changes a bit, because the
width and height used in install_corners() are the
meta_window_get_outer_rect() (which includes the visible borders but not
the invisible ones), whereas the more readily-available rectangle is the
MetaFrame.rect (which includes both). Computing the same width and height
as meta_window_get_outer_rect() involves compensating for the invisible
borders, but the UI layer is the authority on those anyway, so it seems
clearer to have it do the calculations from scratch.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=697758
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
This makes it a bit simpler for other functions on a MetaUIFrame to
get this information.
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=697758
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
XUngrabKey() doesn't work for XI2 grabs and XI2 doesn't provide API
with similar functionality. As such, we have to refactor the code a
bit to be able to call XIUngrabKeycode() for each key binding, then
reload keybindings and finally grab the new ones.
https://bugzilla.gnome.org/show_bug.cgi?id=697003
compositor/meta-background.c:64: error: redefinition of typedef 'MetaBackgroundPrivate'
./meta/meta-background.h:51: error: previous declaration of 'MetaBackgroundPrivate' was here
A correctly constructed GtkStyleContext must have its screen
and widget paths set. Getting the frame font caused crashes
on some systems because those were not correctly initialised.
https://bugzilla.gnome.org/show_bug.cgi?id=696814
Right now we call unset_texture from MetaBackground's dispose method.
unset_texture assumes there's a pipeline available, but there may not
be if the object was just created.
This commit fixes that incorrect assumption.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
Cogl automatically caches pipelines with no eviction policy,
so we need to make sure to reuse snippets to prevent
identical pipelines from getting cached separately.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
g_task_propagate_pointer relinishes the GTask
of its reference to the propagated pointer, so we need to
unref it ourselves when we're done with it.
https://bugzilla.gnome.org/show_bug.cgi?id=696157
In 97a4cc8c, we accidentally lost the check that kept us from
sending multiple configures to a window before it responds to
_NET_WM_SYNC_REQUEST. So _NET_WM_SYNC_REQUEST stopped working
properly. Add a check back with the same effect.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
During a resize, if we don't have a configure pending, then a counter
change shouldn't trigger anything other than the normal drawing:
it's just a spontaneous frame from the application. So don't try
to update the position or remove our timeout ID.
https://bugzilla.gnome.org/show_bug.cgi?id=696091
ClutterBinLayout's get_preferred_width / get_preferred_height
doesn't respect fixed child positioning when calculating the
size of the layout, but does when allocating. This is absurdly
broken, but it's what we're given. Use a ClutterFixedLayout,
which doesn't have these issues.
https://bugzilla.gnome.org/show_bug.cgi?id=696089
Trying to track the fullscreen status outside of Mutter, as GNOME Shell
was doing previously, was very prone to errors, because Mutter has a
very tricky definition of when a window is set to be fullscreen and
*actually* acting like a fullscreen window.
* Add meta_screen_get_monitor_in_fullscreen() and an
::in-fullscreen-changed signal. This allows an application to
track when there are fullscreen windows on a monitor.
* Do the computation of fullscreen status in a "later" function that
runs after showing, so we properly take focus into account.
* To get ordering of different phases right, add more values
to MetaLaterType.
* Add auto-minimization, similar to what was added to GNOME Shell
earlier in this cycle - if a window is set to be fullscreen, but
not actually fullscreen, minimize.
https://bugzilla.gnome.org/show_bug.cgi?id=649748
Since the tile mode is now always reset on maximize(), this code
no longer does anything (not to mention that side-by-side tiled
windows haven't snapped back for a while now).
https://bugzilla.gnome.org/show_bug.cgi?id=682779
We used to restore side-by-side tiling when unmaximizing, so we
kept the tile-mode during maximization. Since commit 10d53fc7d
there's no longer a good reason to do so, and it can result in
tile previews being shown erroneously on window drag operations
without motion (double-click on titlebar), so reset the tile
mode in maximize().
https://bugzilla.gnome.org/show_bug.cgi?id=682779
The tile preview is expected to be shown underneath the focus window.
However the code that restacks the preview broke when override-redirect
windows were moved to a separate window group.
To fix, special-case tile previews to put them in the NORMAL layer.
https://bugzilla.gnome.org/show_bug.cgi?id=696053
If _NET_WM_OPAQUE_REGION is set when the window is first mapped, the
initial load_properties will happen before the window actor is created,
and we'll have a call to meta_compositor_window_shape_changed. Just
fizzle this call out instead of doing anything fancy, as we'll pick
up the opaque region when the window actor is eventually created.
https://bugzilla.gnome.org/show_bug.cgi?id=695813
Previously, we were handling failure to respond to _NET_WM_SYNC_REQUEST
in the code path for throttling motion events. But this meant that
if a window didn't respond to _NET_WM_SYNC_REQUEST and there were no
motion events - for a keyboard resize, or after the end of the grab
operation - it would end up in a stuck state.
Use a separate per-window timeout to reliably catch the failure to respond
to _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
During resizing we froze window updates when configuring the
window, and unfroze the window updates when processing the
next resize. This wasn't absolutely reliable, because we might
not have a next resize. Instead tie window freezing more
directly to the current sync request value - a window is
frozen until it catches up with the last value we sent it
in _NET_WM_SYNC_REQUEST.
Testing with unresponsive clients showed that there was a bug
where window->disable_sync once set, would not actually disable
sync, but it *would* disable noticing that the client was
unresponsive for the next resize. Fix that by checking for
->disable_sync before sending _NET_WM_SYNC_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=694046
Window actors might be temporarily parented to intermediate actors during
effect, but we should not require that the plugin keeps track of stacking.
Rather, assume that the intermediate groups holds a whole stack, and
applying position within it.
https://bugzilla.gnome.org/show_bug.cgi?id=695711
When windows get redirected off screen, all that gets left behind
is black. We don't want to flicker black at startup, though.
This commit maps the overlay window early, before redirecting
toplevels, so they end up getting snapshotted onto the background
pixmap of the overlay window when the overlay window is mapped.
https://bugzilla.gnome.org/show_bug.cgi?id=694321
Send a _NET_WM_FRAME_DRAWN for each newly created window, as required
by the specification. This avoids a race where a window might be created
frozen but already unfrozen by the time we first see fetch the
counter value.
Remove a duplicate call to meta_compositor_set_updates_frozen() which
was called before the MetaWindowActor is created and hence did nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=694771
mutter currently only filters the overlay key through the shell
when there is a grab operation and that grab operation belongs to the
shell (because the shell is pushModal'd). This means the shell can't
filter out overlay key press events events at startup (since the shell
isn't normally modal).
This commit changes the code to always run the shell filtering code,
even when the shell is not modal.
https://bugzilla.gnome.org/show_bug.cgi?id=694837
The background vignette currently fits itself to the painted
texture, instead of the monitor. This causes some very
wrong looking drawing for backgrounds that don't fill the screen.
This commit reworks the vignette shader code to be clearer, more
correct, and parameterized so that it knows how to scale and
position the vignette.
https://bugzilla.gnome.org/show_bug.cgi?id=694393
The WALLPAPER style of background painting currently
draws starting in the upper left corner of each monitor.
This isn't really correct, it means the seam between
monitors doesn't match up and edges look unbalanced if
the tile isn't a multipe of monitor size.
Really, the tiles should be centered in the middle of
the screen. (Just like when tiling a bathroom floor,
tiles should start in the center of the room.)
This commit reworks the math to make that happen.
https://bugzilla.gnome.org/show_bug.cgi?id=694393
Commit 4f2bb583bf started to use a clutter_threads_add_repaint_func_full
callback instead of connecting to the stage's paint signal.
The callback has to return TRUE if it wants to be called again, so fix that
as we want to call it for every frame (otherwise apps supporting the WM SYNC
protocol will stop drawing).
https://bugzilla.gnome.org/show_bug.cgi?id=695006
Doing so causes useless full stage redraws and breaks culling
as clutter cannot know how the signal handler affects painting.
So use clutter_threads_add_repaint_func_full with the
CLUTTER_REPAINT_FLAGS_POST_PAINT flag instead.
https://bugzilla.gnome.org/show_bug.cgi?id=694988
gnome-shell shouldn't announce to the session manager it's
"ready" until it's fully initialized. It currently tells
the session manager it's ready as soon as it hits the main
loop. This causes nautilus in classic mode to start before
we have workspaces initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=694876
During compositor grabs, all global keybindings that don't go
through mutter's keybinding system are blocked. To allow other
processes to make use of it, gnome-shell will expose a simple
grab API on DBus; for this, add API to grab key combos directly
instead of parsing accelerators stored in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=643111
There is currently code to try to fill gradients in a
hardware native format, using #ifdefs. That optimization is
unimportant since gradients only use 2 byte buffers. It's
also incorrect because it's getting the channel order wrong
at buffer initialization time.
This commit drops the ifdefs for clarity and fixes the
channel order.
https://bugzilla.gnome.org/show_bug.cgi?id=694641
meta_screen_get_monitor_for_rect will return the monitor that
a given rect belongs in (choosing the "best" monitor based on
overlap, if there are overlapping monitors).
It doesn't work with 0x0 rects, though.
This commit fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=694725
meta_window_is_remote compares a cached copy of the system hostname
with the hostname of the client window
(as presented by the WM_CLIENT_MACHINE property).
Of course, the system hostname can change at any time, so caching
it is wrong. Also, the WM_CLIENT_MACHINE property won't necessarily
change when the system hostname changes, so comparing it with the
new system hostname is wrong, too.
This commit makes the code call gethostname() at the time
WM_CLIENT_MACHINE is set, check whether it's remote then, and cache
that value, rather than comparing potentially out of sync hostnames
later.
https://bugzilla.gnome.org/show_bug.cgi?id=688716
Background handling in GNOME is very roundabout at the moment.
gnome-settings-daemon uses gnome-desktop to read the background from
disk into a screen-sized pixmap. It then sets the XID of that pixmap
on the _XROOTPMAP_ID root window property.
mutter puts that pixmap into a texture/actor which gnome-shell then
uses.
Having the gnome-settings-daemon detour from disk to screen means we
can't easily let the compositor handle transition effects when
switching backgrounds. Also, having the background actor be
per-screen instead of per-monitor means we may have oversized
textures in certain multihead setups.
This commit changes mutter to read backgrounds from disk itself, and
it changes backgrounds to be per-monitor.
This way background handling/compositing is left to the compositor.
https://bugzilla.gnome.org/show_bug.cgi?id=682427
actor_is_untransformed is a function meta-window-group uses to determine
if an actor is relatively pixel aligned and not contorted. It then
returns the coordinates of the actor.
In a subsequent commit will need the function in a different file, so
this commit separates it out.
https://bugzilla.gnome.org/show_bug.cgi?id=682427
Window menus use the first key combination for a binding to show the
acceleration, so the list must be in the right configured order, which
is the opposite of what's built by g_slist_prepend()
https://bugzilla.gnome.org/show_bug.cgi?id=694045
Now that the background actor is reactive, this means that
clicks on the window group part of the stage, even when they're
on an X window, will be registered as the background actor, as
all of the other children of the group aren't reactive. This can
happen when a plugin takes a modal grab, for instance.
https://bugzilla.gnome.org/show_bug.cgi?id=681540
The guard window is effectively the background window, as it sits
in between live windows and minimized windows. This gives us a nice
easy place to allow users to allow users to right-click or long-press
on the wallpaper.
https://bugzilla.gnome.org/show_bug.cgi?id=681540
We do, in fact, need freezing to affect window geometry, so that
move-resize operations (such as an interactive resize from the
left, or a resize of a popup centered by the application) occur
atomically.
So to make map effects work properly, only exclude the initial
placement of a window from freezing. (In the future, we may want
to consider whether pure moves of a window being done in response
to a user drag should also be excluded from freezing.)
Rename meta_window_sync_actor_position() to
meta_window_sync_actor_geometry() for clarity.
https://bugzilla.gnome.org/show_bug.cgi?id=693922
If a window is frozen because it is repainting, that shouldn't kee[p
us from updating its position: we don't want a slow-to-update window
to move around the screen chunkily when dragged. (This does reduce
the efficiency of begin/end frames for replacing double-buffering,
but that never works very well in the case where there was an overlapping
window or the entire screen needed redrawing for whatever reason.)
This fixes a bug where a window that was mapped frozen would not get
positioned properly until after the map effect finished, and would
jump from 0,0 at that point. Since effects *do* need to prevent
actor repositioning by Mutter, we must position the actor before any
effect starts.
Because we now are queuing invalidates on frozen windows, fix the
logic for that so that we properly update everything when the window
unfreezes.
https://bugzilla.gnome.org/show_bug.cgi?id=693922
The WM spec requires _NET_WM_FRAME_DRAWN to *always* be sent when
there is an appropriate update to the sync counter value. We were
potentially missing _NET_WM_FRAME_DRAWN when an application did a
spontaneous update during an interactive resize and during effects.
Refactor the code to always send _NET_WM_FRAME_DRAWN, even when
a window is frozen.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
During resizing, An odd counter value (indicating the beginning of a frame)
shouldn't cause us to redraw and start a new frame, only an even counter
value. This was causing the frozen state for the window frame counter to
overlap the frozen state for the resize, causing the window not to be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=693833
Put override redirect windows such as menus into a separate window group
stacked above everything else. This will allow us to visually put these
above other compositior chrome.
Based on a patch from Muffin.
https://bugzilla.gnome.org/show_bug.cgi?id=633620
In different places we checked the grab op differently when determing
whether we are using _NET_WM_SYNC_REQUEST. This was somewhat covered
up previously by the fact that we only had a sync alarm when using
_NET_WM_SYNC_REQUEST, but that is no longer the case, so consistently
use meta_grab_op_is_resizing() everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When a client is drawing as hard as possible (without sleeping
between frames) we need to draw as soon possible, since sleeping
will decrease the effective frame rate shown to the user, and
can also result in the system never kicking out of power-saving
mode because it doesn't look fully utilized.
Use the amount the client increments the counter value by when
ending the frame to distinguish these cases:
- Increment by 1: a no-delay frame
- Increment by more than 1: a non-urgent frame, handle normally
https://bugzilla.gnome.org/show_bug.cgi?id=685463
We previously had timestamp information stubbed out in
_NET_WM_FRAME_DRAWN. Instead of this, add a high-resolution timestamp
in _NET_WM_FRAME_DRAWN then send a _NET_WM_FRAME_TIMINGS message
after when we have complete frame timing information, representing
the "presentation time" of the frame as an offset from the timestamp
in _NET_WM_FRAME_DRAWN.
To provide maximum space in the messages,_NET_WM_FRAME_DRAWN and
_NET_WM_FRAME_TIMINGS are not done as WM_PROTOCOLS messages but
have their own message types.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Add a function to convert from g_get_monotonic_time() to a
"high-resolution server timestamp" with microsecond precision.
These timestamps will be used when communicating frame timing
information to the client.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Use XSyncSetPriority() to prioritize the compositor above applications
for X server priority. In practice, this makes little difference because
the Xorg "smart scheduler" will schedule in a single application for
time slices that exceed the frame drawing time, but it's theoretically
right and might make a difference if the X server scheduler is improved.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Using a "sync delay" where we wait for 2 ms after the vblank before
starting to draw the next frame provides for much more predictable
latency for applications. An application can know that if it completes
a frame any time between 8ms before the vblank to the vblank,
it will reliably be drawn on the following vblank period, rather than
having an unpredictable latency depending on whether the compositor
is currently busy drawing a frame or not.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of defining CLUTTER_ENABLE_EXPERIMENTAL_API and
COGL_ENABLE_EXPERIMENTAL_API in individual source files, enable
them on the command line. We weren't tracking exactly what pieces of
experimental API we were using and we were using the experimental
API in most source files that used Clutter and Cogl, so the
local #defines were annoying rather than useful.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
It's possible that a client might update the (extended)
_NET_WM_SYNC_REQUEST_COUNTER counter twice without actually drawing
anything. In that case, we still should send a _NET_WM_FRAME_DRAWN
message since it's hard for a client to know every case in which
no damage is generated. For now, do it the easy way by forcing a
stage repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Resizing the frame triggers creation of a new backing pixmap for the
window, so we should do that first before we resize the client window
and mess up the contents of the old backing pixmap.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
When the application provides the extended second counter for
_NET_WM_SYNC_REQUEST, send a client message with completion
information after the next redraw after each counter update
by the application.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
If an application provides two values in _NET_WM_SYNC_REQUEST_COUNTER,
use that as a signal that the applications wants an extended behavior
where it can update the counter as well as the window manager. If the
application updates the counter to an odd value, updates of the
window are frozen until the counter is updated again to an even value.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Instead of creating a new alarm each time we resize a window
interactively, create an alarm the first time we resize a window
and keep it around permanently until we unmanage the window.
Doing it this way will be useful when we allow the application to
spontaneously generate sync request updates to indicate
frames it is drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
Replace the unused meta_compositor_set_updates() with
a reversed-meaning meta_compositor_set_updates_frozen(), and use
it to implement freezing application window updates during
interactive resizing. This avoids drawing new areas of the window
with blank content before the application has a chance to repaint.
https://bugzilla.gnome.org/show_bug.cgi?id=685463
meta_screen_resize calls meta_window_update_for_monitors_changed for all
windows including OR windows when the monitors change (or screen size).
This calls meta_window_move_between_rects for the window which attempts to
move the OR window by calling meta_window_move_resize.
meta_window_move_resize refuses to do anything on OR windows (just returns
for OR windows).
This causes a storm of assert messages when the screen
resolution changes while an OR window is visible.
(like the one gnome-control-center displays with the monitor name).
Fix that by not calling meta_window_update_for_monitors_changed for OR windows
and let the applications handle them by themselves.
https://bugzilla.gnome.org/show_bug.cgi?id=693540
- set GTK_STYLE_CLASS_TOOLTIP on the window, and use the same code of
GtkTooltip to paint it
- set GDK_WINDOW_TYPE_HINT_TOOLTIP and make the window non-resizable, so
it doesn't get an incorrect shadow from the WM
https://bugzilla.gnome.org/show_bug.cgi?id=692741
Since we're going to use the tooltip's rounded corners we need a little
bit more of margin (which wasn't a bad idea even with the frame).
Also, don't use GtkMisc for this anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=692741
As the hash table no longer stores only window IDs, we should rename it so
that we make sure to check if something is actually a window before using it
as a window.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
XInput 2.3 adds support for "barrier events", which let us know when
a pointer barrier has been hit, and when the pointer has stopped
hitting the barrier, and lets us "release" the barrier, temporarily
letting the pointer pass through the barrier. These features can be
combined to allow for certain pointer gestures, such as "pushing"
against the bottom of the screen, or stopping the pointer on monitor
edges while dragging slowly for increased edge precision.
This commit should allow graceful fallback if servers with
XInput 2.3 aren't supported.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Currently, we have a few function wrappers in the shell for pointer
barriers. If we want to implement interactive features on barriers,
we need some sort of signal to be notified of the interactivity.
In that case, we need to make a more sophisticated object-based wrapper
for a pointer barrier. Add one, and stick it in mutter.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Some windows may already have event masks on them that we've selected
for, especially if we're using GTK+ windows. In particular, this fixes
window menus in the XI2 port.
https://bugzilla.gnome.org/show_bug.cgi?id=690581
gdk_device_manager_get_client_pointer which in calls
XIGetClientPointer seems to be very slow in a XI2 world.
So use
gdk_x11_device_manager_lookup (gmanager, META_VIRTUAL_CORE_POINTER_ID)
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=693354
This new hint allows compositors to know what portions of a window
will be obscured, as a region above them is opaque. For an RGB window,
possible to glean this information from the bounding shape region of
a client window, but not for an ARGB32 window. This new hint allows
clients that use ARGB32 windows to say which part of the window is
opaque, allowing this sort of optimization.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
With the shape region always set, it turns out the bounding region
is only used in one place, that's easily replaced with a variable
we already have available to us.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
With recent changes in the way the window mask texture is constructed,
the shape_region is always set, which means that we can remove
conditionals checking if the shape region is set.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
With the shape region always set, it turns out the bounding region
is only used in one place, that's easily replaced with a variable
we already have available to us.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
With recent changes in the way the window mask texture is constructed,
the shape_region is always set, which means that we can remove
conditionals checking if the shape region is set.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
Currently we only unredirect monitor sized override redirect windows.
This was supposed to catch fullscreen opengl games and improve
their performance.
Newer games like fullscreen webgl games and SDL2 using games (like L4D) as well as wine based games do not use override redirect windows so we need a better
heuristic to catch them.
GLX windows always damage the whole window when calling glxSwapBuffers and
never damage sub regions. So we can use that to detect them.
The new heuristic unredirects windows fullscreen windows that have damaged the
whole window more then 100 times in a row.
https://bugzilla.gnome.org/show_bug.cgi?id=683786
We should call meta_window_actor_detach not
meta_window_actor_queue_create_pixmap to create a new pixmap when we redirect a
previously unredirected window again.
https://bugzilla.gnome.org/show_bug.cgi?id=693042
We want to put barrier wrappers in mutter, which requre XFixes 5.0.
XFixes 5.0 was released in March, 2011, which should be old enough
to mandate support for.
https://bugzilla.gnome.org/show_bug.cgi?id=677215
Using a public method for setting the (cached) icon geometry rather
than accessing the struct members directly allows setting the icon
geometry from extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=692997
We have some code in gnome-shell that does the equivalent of:
window.get_workspace() == workspace || window.is_on_all_workspaces();
which is a bit unwieldy. We already have a method in mutter,
so use that and document it.
https://bugzilla.gnome.org/show_bug.cgi?id=691744
With some recent changes to how mask textures are constructed from
shapes, a helper method we made was only called in one place, allowing
us to drop a reference/destroy, and remove a double clear.
https://bugzilla.gnome.org/show_bug.cgi?id=679901
Due to a conditional error, meta_region_builder_add_rectangle was called
on every single blank pixel, rather than at the end of spans. With the new
rename, it's fairly clear to see the error. Fix the check to ensure that
we no longer make extraneous calls to meta_region_builder_add_rectangle.
https://bugzilla.gnome.org/show_bug.cgi?id=691874
GtkWindow added the BACKGROUND style class to all windows, which the
CSS file selects on to set a background color for all windows. Without
this, the background color becomes undefined, and thus window frames
look like they have "glitchy" graphics.
https://bugzilla.gnome.org/show_bug.cgi?id=690317
The minimize action does not make much sense without a window list,
which is why its default keybinding was removed in bug 643609;
getting the focused window out of the way quickly can still be useful
though, so change the description to "Hide window" instead, which does
not imply a window list. We will then assign a default shortcut again.
https://bugzilla.gnome.org/show_bug.cgi?id=682887
MetaButtonLayout is extremely unfriendly for introspection: its fields
are arrays of a fixed length, but the actual length is determined by
a custom stop value (e.g. not NULL / 0).
Without API changes this will never work nicely in introspection, but
we can at least make it work; start by filling up unused fields with
the stop value rather than leaving it at random values.
https://bugzilla.gnome.org/show_bug.cgi?id=689263
The style context of the widget is rarely what we want. We won't
fix this to be a MetaFrames style context yet; this just changes
the internal API.
https://bugzilla.gnome.org/show_bug.cgi?id=690317
Currently, we ping windows only when attempting to delete them, but
if the application is not responding, we want to show the dialog
as soon as possible. Given that we cannot be passively notified that
the window stopped responding with the current X11 protocol, a good
workaround is to ping the window when activating it.
If the window stops responding while active, it is expected the user
will try to switch window or open the overview, and when coming back
he'll get the failure dialog.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
Add meta_window_check_alive(), which is a simple wrapper over
meta_display_ping_window(), and takes care of showing the "Application
is not responding dialog" if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=684340
We want to maintain the invariant that an attached modal dialog is always
of type MODAL_DIALOG, so recompute is_attached_dialog() when the window
type changes.
https://bugzilla.gnome.org/show_bug.cgi?id=690454
This removes our final dependency on Core Events, meaning
we can remove support code for them soon.
This commit is a bit ugly as it requires ui having a dependency on
core, but this is already a hack, so this is thus a hack inside a
hack, and two hacks make a right or however that goes.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
In random places that are not grabs, we selected for events on
things like the root window, stage window, COW and more. Switch
these over to using the proper XI2 APIs.
https://bugzilla.gnome.org/show_bug.cgi?id=688779
