* float-alpha-value:
[script] Parse easing modes by name
[docs] Update the easing modes documentation
[animation] Implement new easing functions
[animation] Move the alpha value to floating point
Since we allow overriding the paint() implementation through the
::paint signal to change the way an actor is being painted, we
should also allow overriding the pick() implementation using a
::pick signal.
The script converted calls to COGL_FIXED_MUL(x,y) to (x*y). However
this fails for cases like this:
COGL_FIXED_MUL(a + b, c)
which become
(a + b * c)
The meaning of this is of course different because multiplication has
a higher precedence than addition.
This was causing breakages in cogl_texture_quad_sw when the vertex
coordinates are not in increasing order. This was the case in
test-backface-culling when NPOTs are not available.
Improve clutter_sinx() by replacing the low precision CFX_SIN_STEP
with a multiply/divide pair. This reduces the maximum error from
1.8e-04 to 2.4e-05.
http://bugzilla.openedhand.com/show_bug.cgi?id=1314
Based on a patch by Owen W. Taylor <otaylor@fishsoup.net>
Since a pick is really a paint operation, we can safely get
the allocation box, instead of using get_width() and get_height().
This should help cutting down the function calls. If we were
feeling adventurous, we could even use the allocation directly
from the private data structure.
Based on a patch by Gwenole Beauchesne <gbeauchesne@splitted-desktop.org>
Compute the value of the camera distance as exactly half the xx
component of the projection matrix. The heuristically derived
value for 60 degrees was off by about 0.016%, causing noticeable
blurring, and other field of view angles which didn't have the
heuristic adjustment off by much more.
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
If an actor is not set as visible, or if it is in a section of
the scenegraph that it's set as not visible (e.g. one of the
parents is not visible) then we should not queue a redraw for
it.
Patch based on code from Michael Boccara <michael@graphtech.co.il>
The intention behind ::queue-redraw is to be able to block the
default handler by attaching a callback and calling one of the
g_signal_stop_emission variants.
However this doesn't work, because ::queue-redraw has the
G_SIGNAL_RUN_FIRST flag instead of G_SIGNAL_RUN_LAST.
The GValue and GParamSpec integration of ClutterUnit was still
using the old, fixed-point based logic.
Storing ClutterUnits in a GValue should use floating point values,
and ClutterParamSpecUnit should follow suit.
Instead of recomputing the number of units needed to fit in
an em each time clutter_units_em() is called, we can store this
value into the default Backend along with the resolution and
font name. The value should also be updated each time the
resolution and font are changed, to keep it up to date.
The coordinates of each ButtonEvent are relative to the stage that
received the event, so we should document this in the structure
annotation.
It should also be mentioned that the coordinates can be transformed
into actor-relative coordinates by using transform_stage_point().
An em is a unit of measurement in typography, equal to the point
size of the current font.
It should be possible to convert a value expressed in em to
ClutterUnits by using the current font and the current DPI as
stored by the default backend.
The stage-with/height-percentage converters had been broken by
the multiple-stages support of Clutter 0.8. They are also made
useless by the fact that Units are now floating point values.
The millimeters and typographic points converters also depended
on the default stage, but they can be reworked to use the default
DPI coming from the default Backend instead.
Boolean arguments for functions are pretty evil and usually
lead to combinatorial explosion of parameters in case multiple
settings are added.
In the case of the COGL texture constructors we have a boolean
argument for enabling the auto-mipmapping; it is conceivable that
we might want to add more settings for a COGL texture without
breaking API or ABI compatibility, so the boolean argument should
become a bitmask.
The internals have not been changed: instead of checking for
a non-zero value, we check for a bitmask being set.
ClutterMedia was a rough cut at a simple media API; it needs some
re-evaluation before 1.0 in order to keep it simple to use, and
simple to implement.
- ClutterMedia:position
The position property accessors collide with the corresponding
ClutterActor methods, which make it impossible to bind them in
high-level languages:
video_texture.set_position()
video_texture.get_position()
In order to resolve the collision, we have to go through the
GObject properties API:
video_texture.set('position', value)
value = video_texture.get('position')
A :position in seconds is also a GStreamer-ism, and should rather
be converted to a :progress property, with a normalized value
between 0 and 1. the current position in seconds would then simply
be progress*duration. For non-seekable streams, 0.0 would always
be returned. This makes it easier to use the progress inside
animations, Timelines or ClutterPath instances.
- ClutterMedia:volume should be renamed to :audio-volume and normalized
as well, instead of being a floating point value between 0 and 100.
- ClutterMedia:buffer-percent should just be :buffer-fill and normalized
between 0.0 and 1.0
This better reflects the fact that the api manages sets of vertex attributes,
and the attributes really have no implied form. It is only when you use the
attributes to draw that they become mesh like; when you specify how they should
be interpreted, e.g. as triangle lists or fans etc. This rename frees up the
term "mesh", which can later be applied to a concept slightly more fitting.
E.g. at some point it would be nice to have a higher level abstraction that
sits on top of cogl vertex buffers that adds the concept of faces. (Somthing
like Blender's mesh objects.) There have also been some discussions over
particle engines, and these can be defined in terms of emitter faces; so some
other kind of mesh abstraction might be usefull here.
Okey; to summarise the changes...
We have converted Clutter and Cogl over to using floating point internally
instead of 16.16 fixed, but we have maintained the cogl-fixed API as a
utility to applications in case they want to implement their own optimizations.
The Clutter API has not changed (though ClutterFixed and ClutterUnit are now
internally floats) but all Cogl entry points have been changed to accept floats
now instead of CoglFixed.
To summarise the rationale...
There have been a number of issues with using fixed point though out Clutter
and Cogl including: lack of precision, lack of range, excessive format
conversion (GPUs tend to work nativly with IEEE floats) and maintainability.
One of the main arguments for fixed point - performance - hasn't shown
itself to be serious in practice so far since we seem to be more limited
by GPU performance and making improvements regarding how we submit data to
OpenGL[ES]/the GPU has had a more significant impact.
Ref: The recent multiple rectangle queuing changes + the
cogl-texture-agressive-batching branch which show significant performance
gains, and that recent tests on the ipodtouch (ARM + MBX) also showed no
loss of performance running with floats.
So finally; please forgive the inevitable fallout, this is a far reaching
change. There are still a few known issues with the fixed to float
conversion but enough works for all our conformance tests to pass, and the
remaining issues hopefully wont be too tricky to solve. For reference two
tags will be available either side of this change: "cogl-fixed-end" and
"cogl-float-start"
The easing modes for a ClutterAlpha can either be parsed by using
the enumeration "nickname" (the shorthand form of the enumeration
value) or by using the common naming policy used in other
animation frameworks, like:
easeInCubic
easeOutElastic
easeInOutBounce
The ClutterAlpha API reference page should also list the
easing modes Clutter provides by default, by showing the
curves used by each entry in the AnimationMode enumeration.
We can also remove the incomplete graph showing the old
alpha functions.
Instead of using our own homegrown alpha functions, we should
use the easing functions also shared by other animation frameworks,
like jQuery and Tween, in the interests of code portability.
The easing functions have been defined by Robert Penner and
are divided into three categories:
In Out InOut
Each category has a particular curve:
Quadratic
Cubic
Quartic
Quintic
Sinusoidal
Exponential
Circular
In addition, there are "physical" curves:
Elastic
Back (overshooting cubic)
Bounce (exponentially decaying parabolic)
Finally, the Linear curve is also provided as a reference.
The functions are private, and are meant to be used only
through their logical id as provided by the AnimationMode
enumeration.
The tests should be updated as well to match the new
easing functions.
The current Alpha value is an unsigned integer that can be used
implicitly as a fixed point value. This makes writing an alpha
function overshooting below and above the current range basically
impossible without complicating an already complex code, and
creating weird corner cases.
For this reason, the Alpha value should be defined as a floating
point normalized value, spanning a range between 0.0 and 1.0; in
order to allow overshooting, the valid range is extended one unit
below and one unit above, thus making it -1.0 .. 2.0.
This commit updates the various users of the ClutterAlpha API
and the tests cases.
This commit also removes all the current alpha functions exposed
in the public API.
To avoid clashing with all the scripted changes, clutter-fixed.h and
clutter-units.h were manually converted to internally use floats instead of
16.16 fixed numbers.
Note: again no API changes were made in Clutter.
To deal with all the corner cases that couldn't be scripted a number of patches
were written for the remaining 10% of the effort.
Note: again no API changes were made in Clutter, only in Cogl.
This is the result of running a number of sed and perl scripts over the code to
do 90% of the work in converting from 16.16 fixed to single precision floating
point.
Note: A pristine cogl-fixed.c has been maintained as a standalone utility API
so that applications may still take advantage of fixed point if they
desire for certain optimisations where lower precision may be acceptable.
Note: no API changes were made in Clutter, only in Cogl.
Overview of changes:
- Within clutter/* all usage of the COGL_FIXED_ macros have been changed to use
the CLUTTER_FIXED_ macros.
- Within cogl/* all usage of the COGL_FIXED_ macros have been completly stripped
and expanded into code that works with single precision floats instead.
- Uses of cogl_fixed_* have been replaced with single precision math.h
alternatives.
- Uses of COGL_ANGLE_* and cogl_angle_* have been replaced so we use a float for
angles and math.h replacements.
This simplifies the mucking about with the model-view matrix that was previously
done which improves its efficiency when scaling is necessary.
Notably: There should now be no performance advantage to using
ClutterCloneTexture as a special case clone actor since this method is just as
efficient.
The unit test was renamed to test-actor-clone.
Many use cases for clonning an actor don't require running a shader on the
resulting clone image and so requiring FBOs in these cases is overkill and
in-efficient as it requires kicking and synchronizing a render for each clone.
This approach basically just uses the paint function of another actor to
implement the painting for the clone actor with some fiddling of the model-
view matrix to scale according to the different allocation box sizes of
each of the actors.
A simple unit test called test-actors2 was added for testing.
It's more sensible to use 2^n-1 for a max tile-waste value rather
than 2^n, so change the value default from 64 to 63. Example:
191 and 192 will both be sliced to 128+64 rather than having
191=>128+64, 192=>256.
http://bugzilla.openedhand.com/show_bug.cgi?id=1402
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
While X11 Pixmap and Window types only have 32-bits of data, they
are actually 'unsigned long'. Change the "window" and "pixmap"
property of ClutterX11TexturePixmaps to be ulong.
This fixes 64-bit bugs where ClutterGLXTexturePixmap passed a
reference to Pixmap to g_object_get("pixmap", &pixmap, ...);
http://bugzilla.openedhand.com/show_bug.cgi?id=1405
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
Since the stage in the EGL native backend only has one size, and it
is determined at realization, we can simply set the SYNC_MATRICES
private flag and let _clutter_stage_maybe_setup_viewport() set up
the GL viewport at the first redraw.
Both clutter_alpha_new_with_func() and clutter_alpha_set_func()
will not register a global alpha function, so we need to update
the documentation to explicitly say so.
The animation mode parameters and properties are now slightly
anonymous unsigned longs, so we need to clarify in the documentation
that the user should either pass a ClutterAnimationMode value or
the result of registering an alpha function.
The animation mode symbolic id might come from the AnimationMode
enumeration or from the clutter_alpha_register_*() family of
functions. For this reason, we should use a gulong instead of
ClutterAnimationMode whenever we have an "animation mode" parameter
or property.
In order to unify alpha functions and animation modes in ClutterAlpha
we should be able to register alpha functions and get a logical id
for them; the logical id will then be available to be used by
clutter_alpha_set_mode().
The registration requires API changes in ClutterAlpha constructors
and methods. It also provides the chance to shift ClutterAlpha
towards the use of animations modes only, and to alpha functions
as a convenience API for language bindings alone.
For example cogl_wrap_glFrustumx -> cogl_wrap_glFrustumf.
The wrappers get #defined to the float versions anyway but it helps
avoid some confusion.
The conversion is done using a regular expression in the upgrade
script. Some of the patches had to be updated to apply cleanly.
