They should be part of the backend-specific API.
The only backend that has an enumeration type is the X11 one, and it's
small, so we can simply put it there.
This is not an ABI change: the backend-specific symbols are still in
the same SO. You'll be required to import clutter-x11.h to have access
to the GType method at the source level, whereas before just importing
clutter.h would have sufficed. The only user of that enumeration was a
function declared in clutter-x11.h, anyway.
We're inconsistently using the NAMESPACE variable instead of passing
the --identifier-prefix and --symbol-prefix command line arguments to
the introspection scanner.
Nobody has been compiling Clutter with profiling enabled in a long time.
UProf itself hasn't been updated in 5 years, and it still depends on
deprecated components like dbus-glib, with no port to GDBus in sight.
The profiling code was moderately useful in the past, but these days
it's probably better to profile Cogl than Clutter itself; timing
information can be extracted by the timestamp on each diagnostic message
that is now available by default in the CLUTTER_NOTE macro, and we can
add ad hoc counters where needed.
Added support for Mir, now clutter can natively draw on MirSurfaces.
This depends on latest cogl git.
Run your clutter apps using CLUTTER_BACKEND=mir
Signed-off-by: Emmanuele Bassi <ebassi@gnome.org>
And move the only private ClutterConstraint method to it.
This commit also sneaks in a change that makes sense for the debugging
of the update_allocation() method, which checks if the allocation was
effectively changed.
Instead of listing every public symbol inside an ancillary file, we can
use compiler annotations. This scheme is also used by GLib and GTK+.
The symbols file is left in tree until the Visual Studio rules are
fixed, but it's not used any more during distcheck.
I double-checked that the exposed ABI is the same before and after this
change, except for symbols that were never meant to be public in the
first place, and that escaped our attention when we generated the first
version of the symbols file.
The current conformance test suite is suboptimal in many ways.
All tests are built into the same binary, which makes adding new tests,
builting tests, and running groups of tests much more awkward than it
needs to be. The first issue, especially, raises the bar of contribution
in a significant way, while the other two take their toll on the
maintainer. All of these changes were introduced back when we had both
Clutter and Cogl tests in tree, and because we were building the test
suite for every single change; since then, Cogl moved out of tree with
all its tests, and we build the conformance test suite only when running
the `check` make target.
This admittedly large-ish commit changes the way the conformance test
suite works, taking advantage of the changes in the GTest API and test
harness.
First of all, all tests are now built separately, using their own test
suite as defined by each separate file. All tests run under the TAP
harness provided by GTest and Automake, to gather a proper report using
the Test Anything Protocol without using the `gtester` harness and the
`gtester-report` script. We also use the Makefile rules provided by GLib
to vastly simplify the build environment for the conformance test suite.
On top of the changes for the build and harness, we also provide new API
for creating and running test suites for Clutter. The API is public,
because the test suite has to use it, but it's minimal and mostly
provides convenience wrappers around GTest that make writing test units
for Clutter easier.
This commit disables all tests in the conformance test suite, as well as
moving the data files outside of the tests/data directory; the next few
commits will re-establish the conformance test suite separately so we
can check that everything works in a reliable way.
The table layout manager has various issues:
• no support for RTL flipping
• most of the layout API is legacy, and has been replaced by the
alignment and expansion flags on ClutterActor
• the animation API is legacy, and has been replaced by the
implicitly animatable allocation
• the spanning cells handling is a bit awkward, as is its API
On top of that, we imported the grid layout management policy from GTK+
into ClutterGridLayout, which provides all the required features in a
more well-designed API.
Instead of wasting time and resources updating TableLayout, we should
deprecate it and point developers of the GridLayout.
Cogl 1.16 has deprecated a lot of API which it will be difficult for
Clutter to catch up with. For the time being the warnings are just
being disabled to keep the build output clean.
https://bugzilla.gnome.org/show_bug.cgi?id=703877
As wayland-client.h and wayland-server.h can't be included together,
split the Wayland backend file into clutter-backend-wayland.h, which
only defines the types, and clutter-backend-wayland-priv.h, which
actually uses the Wayland client types.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
https://bugzilla.gnome.org/show_bug.cgi?id=692851
TapAction is a GestureAction-subclass that handles clicks and
tap gestures. It is meant to provide a replacement for ClickAction
using GestureAction:
• it handles events trasparently without capturing them, so that it
can coexists with other GestureActions;
• the ::tap signal is not emitted if the drag threshold is exceeded;
• building upon GestureAction the amount of code is greatly reduced.
TapAction provides:
• tap signal, notifying users when a tap has been performed.
The image-content example program has been updated replacing its
ClickAction usage with TapAction.
https://bugzilla.gnome.org/show_bug.cgi?id=683948
Let gesture subclasses override how the drag threshold should
be handled:
• CLUTTER_GESTURE_TRIGGER_NONE tells GestureAction that the gesture
must begin immediately and there's no drag limit that will cause
its cancellation;
• CLUTTER_GESTURE_TRIGGER_AFTER is the default GestureAction behaviour,
where it needs to wait until the drag threshold has been exceeded
before considering the gesture valid;
• CLUTTER_GESTURE_TRIGGER_BEFORE will make GestureAction cancel
the gesture once the drag exceed the configured threshold.
For example, ZoomAction and RotateAction could set
CLUTTER_GESTURE_TRIGGER_NONE since the use of two fingers makes the
begin of the action more self-evident, while an hypothetical Tap
gesture may use CLUTTER_GESTURE_TRIGGER_BEFORE to cancel the tap if
the pointer moves too much.
https://bugzilla.gnome.org/show_bug.cgi?id=685028
PanAction is a GestureAction-subclass that implements the panning
concept for scrollable actors, with the ability to emit interpolated
signals to emulate the kinetic inertia of the panning. PanAction provides:
• pan signal, notifying users of the panning gesture status;
• pan-stopped signal, emitted at the end of the interpolated phase
of the panning gesture, if enabled;
• pan-axis property, to allow constraining the dragging to a specific
axis;
• interpolated property, to enable or disable the inertial behaviour;
• deceleration property, to customize the rate at which the momentum
of the panning will be slowed down;
• acceleration-factor property, applied to the inertial momentum when
starting the interpolated sequence.
An interactive test is also provided.
https://bugzilla.gnome.org/show_bug.cgi?id=681648
This patch brings 'enter-event' and 'leave-event' generation for touch
based devices. This leads to adding a new API to retrieve coordinates
of a touch point.
https://bugzilla.gnome.org/show_bug.cgi?id=679797
ClutterTexture is full of side effects that have been picked up over the
years; they make improving ClutterTexture harder than necessary, as well
as making subclassing impossible without introducing weird behaviours in
the child classes as well.
Since Clutter 1.10 we have the ClutterImage content type, which is
side-effects free, given that it just paints texture data using the
state of the actor.
Sadly, we still have subclasses of ClutterTexture, both deprecated and
not, so we cannot deprecate ClutterTexture right out; the type and
structures will still be available, like we do for ClutterGroup, but the
whole API should be moved to the deprecated section, waiting for the
time in which we can get rid of it all.
The build should not add deprecated/ into the default INCLUDE paths, so
that deprecated headers are clearly separated; this will make it easier
to get rid of them when we branch out for 2.0.
ClutterGridLayout is port of GtkGrid to a Clutter layout manager. All
the logic is taken from gtkgrid.c, so all the credits should go to
Matthias Clasen for writing this nice piece of code.
ClutterGridLayout supports adding children with it's own methods
GridLayout.attach() and GridLayout.attach_next_to() as well as
Actor.add_child() and friends. The latter adds children in a similar
fashion to ClutterBoxLayout
https://bugzilla.gnome.org/show_bug.cgi?id=677372
-Add configuration in Clutter projects to add option to build Clutter with
the GDK3 backend in addition to the Win32 backend
-Add another preconfigured clutter-config.h.win32_GDK which contains
backend configs for both GDK3 and Win32 windowing and input.
The introspection scanner has become slightly more annoying, in the hope
that people start fixing their annotations. As it turns out, it was the
right move.
It's time. Now that we have clutter_actor_allocate() respecting the
easing state of an actor, and that the LayoutManager animation virtual
functions have been deprecated, we can put ClutterAlpha on the chopping
block, and be done with it, once and for all.
So long, ClutterAlpha; and thanks for all the fish.
The TransitionGroup class is a logical container for running multiple
transitions.
TransitionGroup is not a Score: it is a Transition that advances each
Transition it contains using the delta between frames, and ensures that
all transitions are in a consistent state; these transitions are not
advanced by the master clock.
The ClutterCanvas content implementation should be used instead, to
avoid stringing along the ClutterTexture API and implementation.
This change requires some minor surgery, as the deprecated section
already contains an header for the previously deprecated methods; plus,
we don't want to deprecate clutter_cairo_set_source_color(). This means
creating a new header to be used for Cairo-related API.
The interface looked like a good idea around the time Clutter 0.2 was
out, but in reality we never had a proper, and supported implementation
outside of clutter-gst - thus, ClutterMedia was acting like a wrapper
around GStreamer, leading to hilarious issues of impedence mismatch
between API and all sorts of indirection issues typical of wrong
abstractions.
In theory, ClutterMedia should have been deprecated and removed before
we hit 1.0, but we kept flip-flopping on the issue.
For 2.0, it's time to take it out.
And shoot it in the face.
The disjunction operator was misspelt as -O which tests whether the
following file is owned by the calling user. This doesn't take enough
arguments so bash was showing an error and the test was always
failing. This meant that NEED_XKB_UTILS was always false which should
have broken the build but the Makefile was mistakenly including
clutter-xkb-utils.c again if SUPPORT_WAYLAND is defined.
See 1b77565e for reference.
Reviewed-by: Emmanuele Bassi <ebassi@linux.intel.com>
