This was done by the clutter X11 backend before prior to introducing
MetaRenderer, but during that work, enabling of said extension was lost.
Let's turn it on again.
https://bugzilla.gnome.org/show_bug.cgi?id=739178
Opening and closing the device may result into XI2 grabs being cut short,
resulting into pad buttons being rendered ineffective, and other possible
misbehaviors. This is an XInput flaw that fell in the gap between XI1 and
XI2, and has no easy fix. It pays us for mixing both versions, I guess...
Work this around by keeping the XI1 XDevice attached to the
ClutterInputDevice, this way it will live long enough that this is not
a concern.
Investigation of this bug was mostly carried by Peter Hutterer, I'm just
the executing hand.
https://gitlab.gnome.org/GNOME/mutter/issues/7Closes: #7
Using 800x600 as minimum logical size is very 4:3 thinking, while a lot of
modern devices are 16:9. The specific reason for this commit is to allow
1.5 scaling at mini-laptops (clamshell devices) with e.g. a 5.5"
1280x720 screen. Given that this device has a keyboard, one obviously
is not holding it very close to ones eyes and at 220 dpi that means the text
is too small at scale 1.0. For one real world example of such a device see:
https://en.wikipedia.org/wiki/GPD_Winhttps://bugzilla.gnome.org/show_bug.cgi?id=792765
Issuing a shortcut inhibit request for a surface without a window set
will lead to a crash when trying to show the shortcut inhibitor dialog.
In such a case, it's safer to deny the request.
https://bugzilla.gnome.org/show_bug.cgi?id=792599
We might receive touch events for unknown touch points, for example
when starting mutter while touching the screen (resulting in no
touch-down event ever being received). Avoid crashing when this happens
by just dropping these events on the floor.
https://bugzilla.gnome.org/show_bug.cgi?id=791371
Wayland clients using the wl_shell interface were never receiving mouse
input. It meant they also couldn't be raised with a click.
This was because the call to meta_wayland_surface_set_window for wl_shell
surfaces did nothing while surface->window == window already. As such, it
never called clutter_actor_set_reactive() and the wl_shell window remained
a non-reactive actor.
Just make sure surface->window isn't already set before calling
meta_wayland_surface_set_window so it can actually do what it's meant to.
https://bugzilla.gnome.org/show_bug.cgi?id=790309
Raising and lowering windows in tandem without a proper grouping
mechanism ended up being more annoying than functional.
This reverts commit e76a0f564c.
If input happens to be grabbed somewhere along the shell, and ungrabbed
while a touch operation is ongoing, the wayland bits will happily start
sending wl_touch.update events from an undeterminate point, without
clients having ever received wl_touch.down for that id.
Consider those touches grabbed for the entirety of their lifetime, if
wl_touch.down wasn't received by the client, no other events will.
https://bugzilla.gnome.org/show_bug.cgi?id=776220
When capture_view* functions are called with the paint flag set
to TRUE, we need to setup the framebuffer, however this was
happening after setting up the viewport, while the viewport
needs the framebuffer to be valid when calling cogl_set_viewport.
https://bugzilla.gnome.org/show_bug.cgi?id=791809
The reason why multiple keycodes could be mapped to a single keysym was
to support having both KEY_FAVORITES and KEY_BOOKMARK map to
XF86Favorites. However, iterating through all layout levels adding all
key codes has severe consequences on layouts with levels that map
things like numbers and arrow. The result is that keybindings that
should only have been added for keycodes from the first level, are
replaced by some unexpected keycode where the same keysym was found on
another level.
An example of this is the up-arrow key and l symbol. Normally you'd find
both the up-arrow symbol and the l symbol on the first level and be done
with it. However, on the German Neo-2 layout, layout level 4 maps the
KEY_E to the l symbol, while layout level 4 maps KEY_E to up-arrow.
Which ever gets to take priority is arbitrary, but for this particular
case KEY_E incorrectly mapped to up-arrow instead of the l symbol,
causing the keyboard shortcut Super+l, which would normally lock the
screen, to trigger the workspace-up (Super+up-arrow) key binding.
https://bugzilla.gnome.org/show_bug.cgi?id=789300
When drmHandleEvent() returns an error and errno is set to EAGAIN,
instead of ending up in a busy loop, poll() the fd until there is
anything to read.
This is a simple backport of commit 406359bba1.
https://bugzilla.gnome.org/show_bug.cgi?id=791024
When the top window actor is destroyed, we need to make sure that
all its references are removed or it could be picked again in next
windows sync, causing crashes.
Since the window might or might not be destroyed when removed (depending
weather animations are in progress over it or not), it's just safer
to wait it to be destroyed before cleaning up any of its reference.
https://bugzilla.gnome.org/show_bug.cgi?id=791006
We only counted configured monitors and whether the config was
applicable (could be assigned), howeverwe didn't include disabled
monitors when comparing. This could caused incorrect configurations to
be applied when trying to use the previous configuration.
One scenario where this happened was one a system with one laptop
screen and one external monitor that was hot plugged some point after
start up. When the laptop lid was closed, the 'previous configuration'
being the configuration where only the laptop panel was enabled, passed
'is-complete' check as the number of configured monitors were correct,
and the configuration was applicable.
Avoid this issue by simply comparing the configuration key of the
previous configuration and the configuration key of the current state.
This correctly identifies a laptop panel with the lid closed as
inaccessible, thus doesn't incorrectly revert to the previous
configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
When deriving the list of disabled monitors when creating new monitors
configs, don't include the laptop panel if the lid is currently closed,
as we consider the laptop panel nonexistent when the laptop lid is
closed when it comes to configuration.
The laptop panel connector(s) will either way be appropriately disabled
anyway, as the field listing disabled monitors in the configuration do
not affect actual CRTC/connector assignments.
https://bugzilla.gnome.org/show_bug.cgi?id=788915
We must emit ::dnd-leave to pair the ::dnd-enter that shall be
emitted whenever the plugin grab begins, otherwise we leave
listeners unable to clean up if the plugin begins and ends a
grab while there is an ongoing DnD operation.
https://bugzilla.gnome.org/show_bug.cgi?id=784545
Change the default key combo to re-enable normal keyboard shortcuts
processing while a shortcut inhibitor is in effect to Super+Escape as
primary system modifier key should be Super.
This should reduce the risk of potential conflict with other shortcuts.
https://bugzilla.gnome.org/show_bug.cgi?id=789386
We tried to get the geometry scale, which may depend on the main
logical monitor assigned to the window. To avoid dereferencing a NULL
logical monitor when headless, instead assume the geometry scale is 1.
https://bugzilla.gnome.org/show_bug.cgi?id=788764
Proprietary drivers such as ARM Mali export EGL_KHR_platform_gbm instead
of EGL_MESA_platform_gbm. As such, GBM platform check should be done for
both MESA and non-MESA drivers.
https://bugzilla.gnome.org/show_bug.cgi?id=780668
Bluetooth mouse usually goes in sleep state after a timeout, when that
happen the mouse is disconnected and on_device_removed function is
called. Before the patch if a touch device is available the
on_device_removed function hide the cursor. The issue is that the cursor
does not reappear once the bluetooth mouse is reconnected because
MetaBackend::current_device_id is not invalidated when on_device_removed
was called.
The patch set MetaBackend::current_device_id to 0 if the current device
is removed. This will make update_last_device to be triggered as soon as
another input device is used or the bluetooth mouse reconnect, as
consequence that the cursor reappear. The id 0 is never given to devices
and can safely used as undefine id.
https://bugzilla.gnome.org/show_bug.cgi?id=761067
This is not a leak per se, but it seems too easy to make valgrind
SIGSEGV due to MetaBackground disconnecting signals from an already
destroyed MetaScreen when trying to SIGTERM gnome-shell. Keeping a
reference fixes this.
https://bugzilla.gnome.org/show_bug.cgi?id=789984
