Last presentation time is mainly used to make sure predicted
presentation time is aligned with display refreshes. Even if it went
back in time, there will be no issue as next presentation time takes
current time into account. Synthetic presentation time is not exactly
aligned with display refreshes, so using it would only result in
inconsistent animations.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1707>
When a transfer request is done to the MetaSelectionSourceRemote source,
it's translated to a SelectionTransfer signal, which the remote desktop
server is supposed to respond to with SelectionWrite.
A timeout (set to 15 seconds) is added to handle too long timeouts,
which cancels the transfer request.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1552>
Nothing is hooked up, it only does basic sanity checking i.e. whether
the clipboard was enabled when interacting with it. No actual clipboard
integration is hooked up yet.
This also syncs org.gnome.Mutter.RemoteDesktop.xml from
gnome-remote-desktop.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1552>
The original implementation of ::touch-mode tested for keyboard
presence to know whether the OSK and other touch-only features were
enabled.
However that didn't pan out, every webcam, card reader and kitchen
sink like to live a second life as EV_KEY devices. This made the
detection of actual external keyboards a much harder task than it
sounds, and was thus removed in commit f8e2234ce5.
Try a different approach here, and test for pointer devices, it
doesn't matter if internal or external devices, the rationales:
- It is significantly easier to get this right, there's virtually
no devices with abs/rel axes that don't try to be a real input
device of some sorts.
- It's not as good as testing for keyboard presence, but it's the
next best thing. These usually come in pairs, except in weird
setups.
- It is better than not having anything for a number of situations:
- Non-convertible laptops with a touchscreen will get touch-mode
disabled due to touchpad presence (plus keyboard). There's
been complains about OSK triggering with those.
- Same for desktop machines with USB touchscreens, the mouse
(and presumably keyboard) attached would make touch-mode
get in the middle.
- Convertible laptops with a broken tablet-mode switch get a
chance to work on tablet modes that do disable input devices
(e.g. detachable keyboards, or via firmware)
- Kiosk machines, tablets, and other devices that have a
touchscreen but will not regularly have a mouse/keyboard
will get the touch-mode enabled.
All in all, this seems to cover more situations the way we expect it,
there's only one situation that the OSK would show where it might
not be desirable, and one that might not show when it better should:
- Tablets and kiosk machines that get one keyboard plugged, but not a
mouse, will still show the OSK, despite being able to type right
away.
- Convertible laptops with broken/unreliable tablet-mode switch (e.g.
ignored by the kernel) rely entirely on the device/firmware
characteristics to work. If after folding into tablet mode the
touchpad remains active, touch-mode will not turn on.
Fixing the tablet-mode switch on these devices should be preferred,
as that'll also make libinput magically disable the touchpad.
The latter can be worked around with the a11y toggle. The former is
merely inconvenient, and nothing prevents the user from plugging a mouse
in addition.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1710>
Technically this is still wrong if the source actor or dnd actor are
transformed in other ways. However geometry scale is the by far most
common case and we currently lack convenience API in Clutter to
easily compute the right values.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1683>
When recording the screen and real time encoding it using a gstreamer
pipeline, that pipeline can stall when the encoder is too slow. Log a
debug message using the new SCREEN_CAST debug topic in that case so we
know when framedrops are happening.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1709>
Since commit c255031b6d, we allow some modifier+scroll events to
pass through to Clutter to enable gnome-shell to handle them. That
action shouldn't trigger a modifier-only action at the same time, so
reset the corresponding tracking just like we do for modifier+click.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1695>
Since commit c255031b6d we pass scroll-events through to
the compositor if the window_grab_modifiers are pressed;
in order to allow gnome-shell to check for those events,
expose the struct member as a MetaDisplay property.
Also take the opportunity to pick a more generic name, now
that the modifier is no longer used exclusively for mouse
clicks (unless we maintain the notion of scroll events as
button 4 and 5 "clicks").
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1695>
The other end of the PipeWire stream can set the buffer data type to a
bitmask of supported buffer types. We should respect this, and not
attempt to allocate a DMA buffer if it isn't asked for.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1697>
Instead of getters, pass the width, height and stride around when
relevant. This also removes the redudant "stream_size" and
"stream_height" variables from the src struct, as they are already part
of the video format.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1697>
Previously we were setting the FBO's viewport to be the same dimensions as
the stage itself for compatibility. This works for most cases, but not if
the actor is larger than the stage. In that case it could cause excessive
clipping if the actor's transformed screen position was negative, which
is seen in https://gitlab.gnome.org/GNOME/gnome-shell/issues/2087
Also if a small actor paints to its negative dimensions (like a box-shadow)
then we might be missing those pixels on the left or top, even though
they're inside the paint volume.
Now we set the viewport dimensions to match the area we're actually
rendering so the FBO contents are never over or under clipped.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3068
Although if you try using shadows larger than that (like in
gnome-shell#1090) then you will also need gnome-shell!1417.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1053>
We had been doing it backwards as far back as e3966882e8 which meant
that we were translating by `fbo_offset / resource_scale` stage units
instead of just `fbo_offset`.
Because `fbo_offset` is in stage units already, it's not scaled and so
needs to be applied after the unscaling from texels to stage units.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1053>
Mutter freezes Xwayland commits when resizing windows, and thaw them in
the window actors' after_paint() for X11.
Yet, after_paint() could be never called, as when a new window is mapped
while the overview is active in gnome-shell.
As a result, the content of the X11 window will remain invisible to the
overview.
Add a new window actor API to tell whether commits can be frozen. For
Wayland window actors, this always return FALSE, whereas for X11 window
actors, it checks whether the Clutter actor is mapped.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1678>
When (un)maximizing, (un)fullscreening, the move/resize action is
flagged with 'ACTION_MOVE' and 'ACTION_RESIZE' , while e.g.
'appears-focus' does not.
When a client misbehaved and didn't immediately reply to a configure
request with a commit with the corresponding ack_configure, the
following commit would trigger a oddly timed move, making the window
appear to move back to a previous position.
Avoid this issue by only carrying over the target window position if the
configuration actually contained a new position.
We cannot only rely on the flags however, as e.g. a new position should
be respected during interactive resize, even though only 'ACTION_RESIZE'
is passed in such scenarios.
Do the same for the size, except if the window state dictates that the
size is fixed to a certain size, e.g. being fullscreen or maximized.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1445>
It's currently only handled by a surface backend framebuffer (assuming
the right GLX extensions are available). While it's theoretically
possible to do the same with the offcreen by having multiple textures,
it's not supported, so leave the FBO variant with a single warning if we
end up there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
The object was still pretending to be CoglFramebuffer itself, by using
naming and calling conventions making it seem like that. Fix that by
passing around the driver instead of the framebuffer.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1514>
