mutter/cogl/driver/gl/cogl-pipeline-opengl.c

1485 lines
50 KiB
C
Raw Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* A Low Level GPU Graphics and Utilities API
*
* Copyright (C) 2008,2009,2010 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-22 01:28:54 +00:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*
*
* Authors:
* Robert Bragg <robert@linux.intel.com>
*/
#include "config.h"
#include "cogl-debug.h"
#include "cogl-util-gl-private.h"
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
#include "cogl-pipeline-opengl-private.h"
#include "cogl-pipeline-private.h"
#include "cogl-context-private.h"
#include "cogl-texture-private.h"
#include "cogl-framebuffer-private.h"
#include "cogl-offscreen.h"
#include "cogl-texture-gl-private.h"
#include "cogl-pipeline-progend-glsl-private.h"
#include <test-fixtures/test-unit.h>
#include <glib.h>
#include <string.h>
/*
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* GL/GLES compatability defines for pipeline thingies:
*/
/* These aren't defined in the GLES headers */
#ifndef GL_POINT_SPRITE
#define GL_POINT_SPRITE 0x8861
#endif
#ifndef GL_COORD_REPLACE
#define GL_COORD_REPLACE 0x8862
#endif
#ifndef GL_CLAMP_TO_BORDER
#define GL_CLAMP_TO_BORDER 0x812d
#endif
Add support for per-vertex point sizes This adds a new function to enable per-vertex point size on a pipeline. This can be set with cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size can be set either by drawing with an attribute named 'cogl_point_size_in' or by writing to the 'cogl_point_size_out' builtin from a snippet. There is a feature flag which must be checked for before using per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES 2.0. GL will only let you set a per-vertex point size from GLSL by writing to gl_PointSize. This is only available in GL2 and not in the older GLSL extensions. The per-vertex point size has its own pipeline state flag so that it can be part of the state that affects vertex shader generation. Having to enable the per vertex point size with a separate function is a bit awkward. Ideally it would work like the color attribute where you can just set it for every vertex in your primitive with cogl_pipeline_set_color or set it per-vertex by just using the attribute. This is harder to get working with the point size because we need to generate a different vertex shader depending on what attributes are bound. I think if we wanted to make this work transparently we would still want to internally have a pipeline property describing whether the shader was generated with per-vertex support so that it would work with the shader cache correctly. Potentially we could make the per-vertex property internal and automatically make a weak pipeline whenever the attribute is bound. However we would then also need to automatically detect when an application is writing to cogl_point_size_out from a snippet. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115) Conflicts: cogl/cogl-context.c cogl/cogl-pipeline-private.h cogl/cogl-pipeline.c cogl/cogl-private.h cogl/driver/gl/cogl-pipeline-progend-fixed.c cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
2012-11-08 16:56:02 +00:00
#ifndef GL_PROGRAM_POINT_SIZE
#define GL_PROGRAM_POINT_SIZE 0x8642
#endif
static void
texture_unit_init (CoglContext *ctx,
CoglTextureUnit *unit,
int index_)
{
unit->index = index_;
unit->enabled_gl_target = 0;
unit->gl_texture = 0;
unit->gl_target = 0;
unit->is_foreign = FALSE;
unit->dirty_gl_texture = FALSE;
unit->matrix_stack = cogl_matrix_stack_new (ctx);
unit->layer = NULL;
unit->layer_changes_since_flush = 0;
unit->texture_storage_changed = FALSE;
}
static void
texture_unit_free (CoglTextureUnit *unit)
{
if (unit->layer)
cogl_object_unref (unit->layer);
cogl_object_unref (unit->matrix_stack);
}
CoglTextureUnit *
_cogl_get_texture_unit (int index_)
{
_COGL_GET_CONTEXT (ctx, NULL);
if (ctx->texture_units->len < (index_ + 1))
{
int i;
int prev_len = ctx->texture_units->len;
ctx->texture_units = g_array_set_size (ctx->texture_units, index_ + 1);
for (i = prev_len; i <= index_; i++)
{
CoglTextureUnit *unit =
&g_array_index (ctx->texture_units, CoglTextureUnit, i);
texture_unit_init (ctx, unit, i);
}
}
return &g_array_index (ctx->texture_units, CoglTextureUnit, index_);
}
void
_cogl_destroy_texture_units (void)
{
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
for (i = 0; i < ctx->texture_units->len; i++)
{
CoglTextureUnit *unit =
&g_array_index (ctx->texture_units, CoglTextureUnit, i);
texture_unit_free (unit);
}
g_array_free (ctx->texture_units, TRUE);
}
void
_cogl_set_active_texture_unit (int unit_index)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->active_texture_unit != unit_index)
{
GE (ctx, glActiveTexture (GL_TEXTURE0 + unit_index));
ctx->active_texture_unit = unit_index;
}
}
/* Note: _cogl_bind_gl_texture_transient conceptually has slightly
* different semantics to OpenGL's glBindTexture because Cogl never
* cares about tracking multiple textures bound to different targets
* on the same texture unit.
*
* glBindTexture lets you bind multiple textures to a single texture
* unit if they are bound to different targets. So it does something
* like:
* unit->current_texture[target] = texture;
*
* Cogl only lets you associate one texture with the currently active
* texture unit, so the target is basically a redundant parameter
* that's implicitly set on that texture.
*
* Technically this is just a thin wrapper around glBindTexture so
* actually it does have the GL semantics but it seems worth
* mentioning the conceptual difference in case anyone wonders why we
* don't associate the gl_texture with a gl_target in the
* CoglTextureUnit.
*/
void
_cogl_bind_gl_texture_transient (GLenum gl_target,
GLuint gl_texture,
CoglBool is_foreign)
{
CoglTextureUnit *unit;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* We choose to always make texture unit 1 active for transient
* binds so that in the common case where multitexturing isn't used
* we can simply ignore the state of this texture unit. Notably we
* didn't use a large texture unit (.e.g. (GL_MAX_TEXTURE_UNITS - 1)
* in case the driver doesn't have a sparse data structure for
* texture units.
*/
_cogl_set_active_texture_unit (1);
unit = _cogl_get_texture_unit (1);
/* NB: If we have previously bound a foreign texture to this texture
* unit we don't know if that texture has since been deleted and we
* are seeing the texture name recycled */
if (unit->gl_texture == gl_texture &&
!unit->dirty_gl_texture &&
!unit->is_foreign)
return;
GE (ctx, glBindTexture (gl_target, gl_texture));
unit->dirty_gl_texture = TRUE;
unit->is_foreign = is_foreign;
}
void
_cogl_delete_gl_texture (GLuint gl_texture)
{
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
for (i = 0; i < ctx->texture_units->len; i++)
{
CoglTextureUnit *unit =
&g_array_index (ctx->texture_units, CoglTextureUnit, i);
if (unit->gl_texture == gl_texture)
{
unit->gl_texture = 0;
unit->gl_target = 0;
unit->dirty_gl_texture = FALSE;
}
}
GE (ctx, glDeleteTextures (1, &gl_texture));
}
/* Whenever the underlying GL texture storage of a CoglTexture is
* changed (e.g. due to migration out of a texture atlas) then we are
* notified. This lets us ensure that we reflush that texture's state
* if it is reused again with the same texture unit.
*/
void
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
_cogl_pipeline_texture_storage_change_notify (CoglTexture *texture)
{
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
for (i = 0; i < ctx->texture_units->len; i++)
{
CoglTextureUnit *unit =
&g_array_index (ctx->texture_units, CoglTextureUnit, i);
if (unit->layer &&
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_layer_get_texture (unit->layer) == texture)
unit->texture_storage_changed = TRUE;
/* NB: the texture may be bound to multiple texture units so
* we continue to check the rest */
}
}
static void
set_glsl_program (GLuint gl_program)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
if (ctx->current_gl_program != gl_program)
{
GLenum gl_error;
while ((gl_error = ctx->glGetError ()) != GL_NO_ERROR)
;
ctx->glUseProgram (gl_program);
if (ctx->glGetError () == GL_NO_ERROR)
ctx->current_gl_program = gl_program;
else
{
GE( ctx, glUseProgram (0) );
ctx->current_gl_program = 0;
}
}
}
void
_cogl_use_fragment_program (GLuint gl_program, CoglPipelineProgramType type)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
/* If we're changing program type... */
if (type != ctx->current_fragment_program_type)
{
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
/* ... disable the old type */
switch (ctx->current_fragment_program_type)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
case COGL_PIPELINE_PROGRAM_TYPE_GLSL:
/* If the program contains a vertex shader then we shouldn't
disable it */
if (ctx->current_vertex_program_type !=
COGL_PIPELINE_PROGRAM_TYPE_GLSL)
set_glsl_program (0);
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
break;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
case COGL_PIPELINE_PROGRAM_TYPE_ARBFP:
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
#ifdef HAVE_COGL_GL
GE( ctx, glDisable (GL_FRAGMENT_PROGRAM_ARB) );
#endif
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
break;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
case COGL_PIPELINE_PROGRAM_TYPE_FIXED:
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
/* don't need to to anything */
break;
}
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
/* ... and enable the new type */
switch (type)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
case COGL_PIPELINE_PROGRAM_TYPE_ARBFP:
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
#ifdef HAVE_COGL_GL
GE( ctx, glEnable (GL_FRAGMENT_PROGRAM_ARB) );
#endif
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
break;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
case COGL_PIPELINE_PROGRAM_TYPE_GLSL:
case COGL_PIPELINE_PROGRAM_TYPE_FIXED:
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
/* don't need to to anything */
break;
}
}
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
if (type == COGL_PIPELINE_PROGRAM_TYPE_GLSL)
{
#ifdef COGL_PIPELINE_FRAGEND_GLSL
set_glsl_program (gl_program);
#else
g_warning ("Unexpected use of GLSL fragend!");
#endif /* COGL_PIPELINE_FRAGEND_GLSL */
}
#ifndef COGL_PIPELINE_FRAGEND_ARBFP
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
else if (type == COGL_PIPELINE_PROGRAM_TYPE_ARBFP)
g_warning ("Unexpected use of ARBFP fragend!");
#endif /* COGL_PIPELINE_FRAGEND_ARBFP */
Merge cogl-program-{gl,gles}.c into one cogl-program.c This merges the two implementations of CoglProgram for the GLES2 and GL backends into one. The implementation is more like the GLES2 version which would track the uniform values and delay sending them to GL. CoglProgram is now effectively just a GList of CoglShaders along with an array of stored uniform values. CoglProgram never actually creates a GL program, instead this is left up to the GLSL material backend. This is necessary on GLES2 where we may need to relink the user's program with different generated shaders depending on the other emulated fixed function state. It will also be necessary in the future GLSL backends for regular OpenGL. The GLSL and ARBfp material backends are now the ones that create and link the GL program from the list of shaders. The linked program is attached to the private material state so that it can be reused if the CoglProgram is used again with the same material. This does mean the program will get relinked if the shader is used with multiple materials. This will be particularly bad if the legacy cogl_program_use function is used because that effectively always makes one-shot materials. This problem will hopefully be alleviated if we make a hash table with a cache of generated programs. The cogl program would then need to become part of the hash lookup. Each CoglProgram now has an age counter which is incremented every time a shader is added. This is used by the material backends to detect when we need to create a new GL program for the user program. The internal _cogl_use_program function now takes a GL program handle rather than a CoglProgram. It no longer needs any special differences for GLES2. The GLES2 wrapper function now also uses this function to bind its generated shaders. The ARBfp shaders no longer store a copy of the program source but instead just directly create a program object when cogl_shader_source is called. This avoids having to reupload the source if the same shader is used in multiple materials. There are currently a few gross hacks to get the GLES2 backend to work with this. The problem is that the GLSL material backend is now generating a complete GL program but the GLES2 wrapper still needs to add its fixed function emulation shaders if the program doesn't provide either a vertex or fragment shader. There is a new function in the GLES2 wrapper called _cogl_gles2_use_program which replaces the previous cogl_program_use implementation. It extracts the GL shaders from the GL program object and creates a new GL program containing all of the shaders plus its fixed function emulation. This new program is returned to the GLSL material backend so that it can still flush the custom uniforms using it. The user_program is attached to the GLES2 settings struct as before but its stored using a GL program handle rather than a CoglProgram pointer. This hack will go away once the GLSL material backend replaces the GLES2 wrapper by generating the code itself. Under Mesa this currently generates some GL errors when glClear is called in test-cogl-shader-glsl. I think this is due to a bug in Mesa however. When the user program on the material is changed the GLSL backend gets notified and deletes the GL program that it linked from the user shaders. The program will still be bound in GL however. Leaving a deleted shader bound exposes a bug in Mesa's glClear implementation. More details are here: https://bugs.freedesktop.org/show_bug.cgi?id=31194
2010-10-15 17:00:29 +00:00
ctx->current_fragment_program_type = type;
}
void
_cogl_use_vertex_program (GLuint gl_program, CoglPipelineProgramType type)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* If we're changing program type... */
if (type != ctx->current_vertex_program_type)
{
/* ... disable the old type */
switch (ctx->current_vertex_program_type)
{
case COGL_PIPELINE_PROGRAM_TYPE_GLSL:
/* If the program contains a fragment shader then we shouldn't
disable it */
if (ctx->current_fragment_program_type !=
COGL_PIPELINE_PROGRAM_TYPE_GLSL)
set_glsl_program (0);
break;
case COGL_PIPELINE_PROGRAM_TYPE_ARBFP:
/* It doesn't make sense to enable ARBfp for the vertex program */
g_assert_not_reached ();
break;
case COGL_PIPELINE_PROGRAM_TYPE_FIXED:
/* don't need to to anything */
break;
}
/* ... and enable the new type */
switch (type)
{
case COGL_PIPELINE_PROGRAM_TYPE_ARBFP:
/* It doesn't make sense to enable ARBfp for the vertex program */
g_assert_not_reached ();
break;
case COGL_PIPELINE_PROGRAM_TYPE_GLSL:
case COGL_PIPELINE_PROGRAM_TYPE_FIXED:
/* don't need to to anything */
break;
}
}
if (type == COGL_PIPELINE_PROGRAM_TYPE_GLSL)
{
#ifdef COGL_PIPELINE_VERTEND_GLSL
set_glsl_program (gl_program);
#else
g_warning ("Unexpected use of GLSL vertend!");
#endif /* COGL_PIPELINE_VERTEND_GLSL */
}
#ifndef COGL_PIPELINE_VERTEND_ARBFP
else if (type == COGL_PIPELINE_PROGRAM_TYPE_ARBFP)
g_warning ("Unexpected use of ARBFP vertend!");
#endif /* COGL_PIPELINE_VERTEND_ARBFP */
ctx->current_vertex_program_type = type;
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
#if defined(HAVE_COGL_GLES2) || defined(HAVE_COGL_GL)
static CoglBool
blend_factor_uses_constant (GLenum blend_factor)
{
return (blend_factor == GL_CONSTANT_COLOR ||
blend_factor == GL_ONE_MINUS_CONSTANT_COLOR ||
blend_factor == GL_CONSTANT_ALPHA ||
blend_factor == GL_ONE_MINUS_CONSTANT_ALPHA);
}
#endif
static void
flush_depth_state (CoglContext *ctx,
CoglDepthState *depth_state)
{
CoglBool depth_writing_enabled = depth_state->write_enabled;
if (ctx->current_draw_buffer)
depth_writing_enabled &= ctx->current_draw_buffer->depth_writing_enabled;
if (ctx->depth_test_enabled_cache != depth_state->test_enabled)
{
if (depth_state->test_enabled == TRUE)
GE (ctx, glEnable (GL_DEPTH_TEST));
else
GE (ctx, glDisable (GL_DEPTH_TEST));
ctx->depth_test_enabled_cache = depth_state->test_enabled;
}
if (ctx->depth_test_function_cache != depth_state->test_function &&
depth_state->test_enabled == TRUE)
{
GE (ctx, glDepthFunc (depth_state->test_function));
ctx->depth_test_function_cache = depth_state->test_function;
}
if (ctx->depth_writing_enabled_cache != depth_writing_enabled)
{
GE (ctx, glDepthMask (depth_writing_enabled ?
GL_TRUE : GL_FALSE));
ctx->depth_writing_enabled_cache = depth_writing_enabled;
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
if (ctx->driver != COGL_DRIVER_GLES1 &&
(ctx->depth_range_near_cache != depth_state->range_near ||
ctx->depth_range_far_cache != depth_state->range_far))
{
if (_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_EMBEDDED))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
GE (ctx, glDepthRangef (depth_state->range_near,
depth_state->range_far));
else
GE (ctx, glDepthRange (depth_state->range_near,
depth_state->range_far));
ctx->depth_range_near_cache = depth_state->range_near;
ctx->depth_range_far_cache = depth_state->range_far;
}
}
UNIT_TEST (check_gl_blend_enable,
0 /* no requirements */,
0 /* no failure cases */)
{
CoglPipeline *pipeline = cogl_pipeline_new (test_ctx);
/* By default blending should be disabled */
g_assert_cmpint (test_ctx->gl_blend_enable_cache, ==, 0);
cogl_framebuffer_draw_rectangle (test_fb, pipeline, 0, 0, 1, 1);
_cogl_framebuffer_flush_journal (test_fb);
/* After drawing an opaque rectangle blending should still be
* disabled */
g_assert_cmpint (test_ctx->gl_blend_enable_cache, ==, 0);
cogl_pipeline_set_color4f (pipeline, 0, 0, 0, 0);
cogl_framebuffer_draw_rectangle (test_fb, pipeline, 0, 0, 1, 1);
_cogl_framebuffer_flush_journal (test_fb);
/* After drawing a transparent rectangle blending should be enabled */
g_assert_cmpint (test_ctx->gl_blend_enable_cache, ==, 1);
cogl_pipeline_set_blend (pipeline, "RGBA=ADD(SRC_COLOR, 0)", NULL);
cogl_framebuffer_draw_rectangle (test_fb, pipeline, 0, 0, 1, 1);
_cogl_framebuffer_flush_journal (test_fb);
/* After setting a blend string that effectively disables blending
* then blending should be disabled */
g_assert_cmpint (test_ctx->gl_blend_enable_cache, ==, 0);
}
static void
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_flush_color_blend_alpha_depth_state (
CoglPipeline *pipeline,
unsigned long pipelines_difference,
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
CoglBool with_color_attrib)
{
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
/* On GLES2 we'll flush the color later */
if (_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_FIXED) &&
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
!with_color_attrib)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
if ((pipelines_difference & COGL_PIPELINE_STATE_COLOR) ||
/* Assume if we were previously told to skip the color, then
* the current color needs updating... */
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
ctx->current_pipeline_with_color_attrib)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline, COGL_PIPELINE_STATE_COLOR);
GE (ctx, glColor4ub (cogl_color_get_red_byte (&authority->color),
cogl_color_get_green_byte (&authority->color),
cogl_color_get_blue_byte (&authority->color),
cogl_color_get_alpha_byte (&authority->color)));
}
}
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
if (pipelines_difference & COGL_PIPELINE_STATE_BLEND)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline, COGL_PIPELINE_STATE_BLEND);
CoglPipelineBlendState *blend_state =
&authority->big_state->blend_state;
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
/* GLES 1 only has glBlendFunc */
if (ctx->driver == COGL_DRIVER_GLES1)
{
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
GE (ctx, glBlendFunc (blend_state->blend_src_factor_rgb,
blend_state->blend_dst_factor_rgb));
}
#if defined(HAVE_COGL_GLES2) || defined(HAVE_COGL_GL)
else
{
if (blend_factor_uses_constant (blend_state->blend_src_factor_rgb) ||
blend_factor_uses_constant (blend_state
->blend_src_factor_alpha) ||
blend_factor_uses_constant (blend_state->blend_dst_factor_rgb) ||
blend_factor_uses_constant (blend_state->blend_dst_factor_alpha))
{
float red =
cogl_color_get_red_float (&blend_state->blend_constant);
float green =
cogl_color_get_green_float (&blend_state->blend_constant);
float blue =
cogl_color_get_blue_float (&blend_state->blend_constant);
float alpha =
cogl_color_get_alpha_float (&blend_state->blend_constant);
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
GE (ctx, glBlendColor (red, green, blue, alpha));
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
if (ctx->glBlendEquationSeparate &&
blend_state->blend_equation_rgb !=
blend_state->blend_equation_alpha)
GE (ctx,
glBlendEquationSeparate (blend_state->blend_equation_rgb,
blend_state->blend_equation_alpha));
else
GE (ctx, glBlendEquation (blend_state->blend_equation_rgb));
if (ctx->glBlendFuncSeparate &&
(blend_state->blend_src_factor_rgb !=
blend_state->blend_src_factor_alpha ||
(blend_state->blend_dst_factor_rgb !=
blend_state->blend_dst_factor_alpha)))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
GE (ctx, glBlendFuncSeparate (blend_state->blend_src_factor_rgb,
blend_state->blend_dst_factor_rgb,
blend_state->blend_src_factor_alpha,
blend_state->blend_dst_factor_alpha));
else
GE (ctx, glBlendFunc (blend_state->blend_src_factor_rgb,
blend_state->blend_dst_factor_rgb));
}
#endif
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
#if defined (HAVE_COGL_GL) || defined (HAVE_COGL_GLES)
if (_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_ALPHA_TEST))
{
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
/* Under GLES2 the alpha function is implemented as part of the
fragment shader */
if (pipelines_difference & (COGL_PIPELINE_STATE_ALPHA_FUNC |
COGL_PIPELINE_STATE_ALPHA_FUNC_REFERENCE))
{
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline,
COGL_PIPELINE_STATE_ALPHA_FUNC);
CoglPipelineAlphaFuncState *alpha_state =
&authority->big_state->alpha_state;
/* NB: Currently the Cogl defines are compatible with the GL ones: */
GE (ctx, glAlphaFunc (alpha_state->alpha_func,
alpha_state->alpha_func_reference));
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
/* Under GLES2 the lighting parameters are implemented as uniforms
in the progend */
if (pipelines_difference & COGL_PIPELINE_STATE_LIGHTING)
{
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline,
COGL_PIPELINE_STATE_LIGHTING);
CoglPipelineLightingState *lighting_state =
&authority->big_state->lighting_state;
GE (ctx, glMaterialfv (GL_FRONT_AND_BACK, GL_AMBIENT,
lighting_state->ambient));
GE (ctx, glMaterialfv (GL_FRONT_AND_BACK, GL_DIFFUSE,
lighting_state->diffuse));
GE (ctx, glMaterialfv (GL_FRONT_AND_BACK, GL_SPECULAR,
lighting_state->specular));
GE (ctx, glMaterialfv (GL_FRONT_AND_BACK, GL_EMISSION,
lighting_state->emission));
GE (ctx, glMaterialfv (GL_FRONT_AND_BACK, GL_SHININESS,
&lighting_state->shininess));
}
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
#endif
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
if (pipelines_difference & COGL_PIPELINE_STATE_DEPTH)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline, COGL_PIPELINE_STATE_DEPTH);
CoglDepthState *depth_state = &authority->big_state->depth_state;
flush_depth_state (ctx, depth_state);
}
if (pipelines_difference & COGL_PIPELINE_STATE_LOGIC_OPS)
{
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline, COGL_PIPELINE_STATE_LOGIC_OPS);
CoglPipelineLogicOpsState *logic_ops_state = &authority->big_state->logic_ops_state;
CoglColorMask color_mask = logic_ops_state->color_mask;
if (ctx->current_draw_buffer)
color_mask &= ctx->current_draw_buffer->color_mask;
GE (ctx, glColorMask (!!(color_mask & COGL_COLOR_MASK_RED),
!!(color_mask & COGL_COLOR_MASK_GREEN),
!!(color_mask & COGL_COLOR_MASK_BLUE),
!!(color_mask & COGL_COLOR_MASK_ALPHA)));
ctx->current_gl_color_mask = color_mask;
}
if (pipelines_difference & COGL_PIPELINE_STATE_CULL_FACE)
{
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline, COGL_PIPELINE_STATE_CULL_FACE);
CoglPipelineCullFaceState *cull_face_state
= &authority->big_state->cull_face_state;
if (cull_face_state->mode == COGL_PIPELINE_CULL_FACE_MODE_NONE)
GE( ctx, glDisable (GL_CULL_FACE) );
else
{
CoglBool invert_winding;
GE( ctx, glEnable (GL_CULL_FACE) );
switch (cull_face_state->mode)
{
case COGL_PIPELINE_CULL_FACE_MODE_NONE:
g_assert_not_reached ();
case COGL_PIPELINE_CULL_FACE_MODE_FRONT:
GE( ctx, glCullFace (GL_FRONT) );
break;
case COGL_PIPELINE_CULL_FACE_MODE_BACK:
GE( ctx, glCullFace (GL_BACK) );
break;
case COGL_PIPELINE_CULL_FACE_MODE_BOTH:
GE( ctx, glCullFace (GL_FRONT_AND_BACK) );
break;
}
/* If we are painting to an offscreen framebuffer then we
need to invert the winding of the front face because
everything is painted upside down */
invert_winding = cogl_is_offscreen (ctx->current_draw_buffer);
switch (cull_face_state->front_winding)
{
case COGL_WINDING_CLOCKWISE:
GE( ctx, glFrontFace (invert_winding ? GL_CCW : GL_CW) );
break;
case COGL_WINDING_COUNTER_CLOCKWISE:
GE( ctx, glFrontFace (invert_winding ? GL_CW : GL_CCW) );
break;
}
}
}
Add support for per-vertex point sizes This adds a new function to enable per-vertex point size on a pipeline. This can be set with cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size can be set either by drawing with an attribute named 'cogl_point_size_in' or by writing to the 'cogl_point_size_out' builtin from a snippet. There is a feature flag which must be checked for before using per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES 2.0. GL will only let you set a per-vertex point size from GLSL by writing to gl_PointSize. This is only available in GL2 and not in the older GLSL extensions. The per-vertex point size has its own pipeline state flag so that it can be part of the state that affects vertex shader generation. Having to enable the per vertex point size with a separate function is a bit awkward. Ideally it would work like the color attribute where you can just set it for every vertex in your primitive with cogl_pipeline_set_color or set it per-vertex by just using the attribute. This is harder to get working with the point size because we need to generate a different vertex shader depending on what attributes are bound. I think if we wanted to make this work transparently we would still want to internally have a pipeline property describing whether the shader was generated with per-vertex support so that it would work with the shader cache correctly. Potentially we could make the per-vertex property internal and automatically make a weak pipeline whenever the attribute is bound. However we would then also need to automatically detect when an application is writing to cogl_point_size_out from a snippet. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115) Conflicts: cogl/cogl-context.c cogl/cogl-pipeline-private.h cogl/cogl-pipeline.c cogl/cogl-private.h cogl/driver/gl/cogl-pipeline-progend-fixed.c cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
2012-11-08 16:56:02 +00:00
#ifdef HAVE_COGL_GL
if (_cogl_has_private_feature
(ctx, COGL_PRIVATE_FEATURE_ENABLE_PROGRAM_POINT_SIZE) &&
Add support for per-vertex point sizes This adds a new function to enable per-vertex point size on a pipeline. This can be set with cogl_pipeline_set_per_vertex_point_size(). Once enabled the point size can be set either by drawing with an attribute named 'cogl_point_size_in' or by writing to the 'cogl_point_size_out' builtin from a snippet. There is a feature flag which must be checked for before using per-vertex point sizes. This will only be set on GL >= 2.0 or on GLES 2.0. GL will only let you set a per-vertex point size from GLSL by writing to gl_PointSize. This is only available in GL2 and not in the older GLSL extensions. The per-vertex point size has its own pipeline state flag so that it can be part of the state that affects vertex shader generation. Having to enable the per vertex point size with a separate function is a bit awkward. Ideally it would work like the color attribute where you can just set it for every vertex in your primitive with cogl_pipeline_set_color or set it per-vertex by just using the attribute. This is harder to get working with the point size because we need to generate a different vertex shader depending on what attributes are bound. I think if we wanted to make this work transparently we would still want to internally have a pipeline property describing whether the shader was generated with per-vertex support so that it would work with the shader cache correctly. Potentially we could make the per-vertex property internal and automatically make a weak pipeline whenever the attribute is bound. However we would then also need to automatically detect when an application is writing to cogl_point_size_out from a snippet. Reviewed-by: Robert Bragg <robert@linux.intel.com> (cherry picked from commit 8495d9c1c15ce389885a9356d965eabd97758115) Conflicts: cogl/cogl-context.c cogl/cogl-pipeline-private.h cogl/cogl-pipeline.c cogl/cogl-private.h cogl/driver/gl/cogl-pipeline-progend-fixed.c cogl/driver/gl/gl/cogl-pipeline-progend-fixed-arbfp.c
2012-11-08 16:56:02 +00:00
(pipelines_difference & COGL_PIPELINE_STATE_PER_VERTEX_POINT_SIZE))
{
unsigned long state = COGL_PIPELINE_STATE_PER_VERTEX_POINT_SIZE;
CoglPipeline *authority = _cogl_pipeline_get_authority (pipeline, state);
if (authority->big_state->per_vertex_point_size)
GE( ctx, glEnable (GL_PROGRAM_POINT_SIZE) );
else
GE( ctx, glDisable (GL_PROGRAM_POINT_SIZE) );
}
#endif
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
if (pipeline->real_blend_enable != ctx->gl_blend_enable_cache)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
if (pipeline->real_blend_enable)
GE (ctx, glEnable (GL_BLEND));
else
GE (ctx, glDisable (GL_BLEND));
/* XXX: we shouldn't update any other blend state if blending
* is disabled! */
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
ctx->gl_blend_enable_cache = pipeline->real_blend_enable;
}
}
static int
get_max_activateable_texture_units (void)
{
_COGL_GET_CONTEXT (ctx, 0);
if (G_UNLIKELY (ctx->max_activateable_texture_units == -1))
{
GLint values[3];
int n_values = 0;
int i;
#ifdef HAVE_COGL_GL
if (!_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_EMBEDDED))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
{
/* GL_MAX_TEXTURE_COORDS is provided for both GLSL and ARBfp. It
defines the number of texture coordinates that can be
uploaded (but doesn't necessarily relate to how many texture
images can be sampled) */
if (cogl_has_feature (ctx, COGL_FEATURE_ID_GLSL) ||
cogl_has_feature (ctx, COGL_FEATURE_ID_ARBFP))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
/* Previously this code subtracted the value by one but there
was no explanation for why it did this and it doesn't seem
to make sense so it has been removed */
GE (ctx, glGetIntegerv (GL_MAX_TEXTURE_COORDS,
values + n_values++));
/* GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS is defined for GLSL but
not ARBfp */
if (cogl_has_feature (ctx, COGL_FEATURE_ID_GLSL))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
GE (ctx, glGetIntegerv (GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS,
values + n_values++));
}
#endif /* HAVE_COGL_GL */
#ifdef HAVE_COGL_GLES2
if (_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_EMBEDDED) &&
_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_PROGRAMMABLE))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
{
GE (ctx, glGetIntegerv (GL_MAX_VERTEX_ATTRIBS, values + n_values));
/* Two of the vertex attribs need to be used for the position
and color */
values[n_values++] -= 2;
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
GE (ctx, glGetIntegerv (GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS,
values + n_values++));
}
#endif
#if defined (HAVE_COGL_GL) || defined (HAVE_COGL_GLES)
if (_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_FIXED))
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
{
/* GL_MAX_TEXTURE_UNITS defines the number of units that are
usable from the fixed function pipeline, therefore it isn't
available in GLES2. These are also tied to the number of
texture coordinates that can be uploaded so it should be less
than that available from the shader extensions */
GE (ctx, glGetIntegerv (GL_MAX_TEXTURE_UNITS,
values + n_values++));
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
}
#endif
g_assert (n_values <= G_N_ELEMENTS (values) &&
n_values > 0);
/* Use the maximum value */
ctx->max_activateable_texture_units = values[0];
for (i = 1; i < n_values; i++)
ctx->max_activateable_texture_units =
MAX (values[i], ctx->max_activateable_texture_units);
}
return ctx->max_activateable_texture_units;
}
typedef struct
{
int i;
unsigned long *layer_differences;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
} CoglPipelineFlushLayerState;
static CoglBool
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
flush_layers_common_gl_state_cb (CoglPipelineLayer *layer, void *user_data)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipelineFlushLayerState *flush_state = user_data;
int unit_index = flush_state->i;
CoglTextureUnit *unit = _cogl_get_texture_unit (unit_index);
unsigned long layers_difference =
flush_state->layer_differences[unit_index];
_COGL_GET_CONTEXT (ctx, FALSE);
/* There may not be enough texture units so we can bail out if
* that's the case...
*/
if (G_UNLIKELY (unit_index >= get_max_activateable_texture_units ()))
{
static CoglBool shown_warning = FALSE;
if (!shown_warning)
{
g_warning ("Your hardware does not have enough texture units"
"to handle this many texture layers");
shown_warning = TRUE;
}
return FALSE;
}
if (layers_difference & COGL_PIPELINE_LAYER_STATE_TEXTURE_DATA)
{
CoglTexture *texture = _cogl_pipeline_layer_get_texture_real (layer);
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
GLuint gl_texture;
GLenum gl_target;
if (texture == NULL)
switch (_cogl_pipeline_layer_get_texture_type (layer))
{
case COGL_TEXTURE_TYPE_2D:
texture = COGL_TEXTURE (ctx->default_gl_texture_2d_tex);
break;
case COGL_TEXTURE_TYPE_3D:
texture = COGL_TEXTURE (ctx->default_gl_texture_3d_tex);
break;
case COGL_TEXTURE_TYPE_RECTANGLE:
texture = COGL_TEXTURE (ctx->default_gl_texture_rect_tex);
break;
}
cogl_texture_get_gl_texture (texture,
&gl_texture,
&gl_target);
_cogl_set_active_texture_unit (unit_index);
/* NB: There are several Cogl components and some code in
* Clutter that will temporarily bind arbitrary GL textures to
* query and modify texture object parameters. If you look at
* _cogl_bind_gl_texture_transient() you can see we make sure
* that such code always binds to texture unit 1 which means we
* can't rely on the unit->gl_texture state if unit->index == 1.
*
* Because texture unit 1 is a bit special we actually defer any
* necessary glBindTexture for it until the end of
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* _cogl_pipeline_flush_gl_state().
*
* NB: we get notified whenever glDeleteTextures is used (see
* _cogl_delete_gl_texture()) where we invalidate
* unit->gl_texture references to deleted textures so it's safe
* to compare unit->gl_texture with gl_texture. (Without the
* hook it would be possible to delete a GL texture and create a
* new one with the same name and comparing unit->gl_texture and
* gl_texture wouldn't detect that.)
*
* NB: for foreign textures we don't know how the deletion of
* the GL texture objects correspond to the deletion of the
* CoglTextures so if there was previously a foreign texture
* associated with the texture unit then we can't assume that we
* aren't seeing a recycled texture name so we have to bind.
*/
if (unit->gl_texture != gl_texture || unit->is_foreign)
{
if (unit_index == 1)
unit->dirty_gl_texture = TRUE;
else
GE (ctx, glBindTexture (gl_target, gl_texture));
unit->gl_texture = gl_texture;
unit->gl_target = gl_target;
}
unit->is_foreign = _cogl_texture_is_foreign (texture);
/* The texture_storage_changed boolean indicates if the
* CoglTexture's underlying GL texture storage has changed since
* it was flushed to the texture unit. We've just flushed the
* latest state so we can reset this. */
unit->texture_storage_changed = FALSE;
}
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
if ((layers_difference & COGL_PIPELINE_LAYER_STATE_SAMPLER) &&
_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_SAMPLER_OBJECTS))
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
{
const CoglSamplerCacheEntry *sampler_state;
sampler_state = _cogl_pipeline_layer_get_sampler_state (layer);
GE( ctx, glBindSampler (unit_index, sampler_state->sampler_object) );
}
/* FIXME: If using GLSL the progend we will use gl_PointCoord
* instead of us needing to replace the texture coordinates but at
* this point we can't currently tell if we are using the fixed or
* glsl progend.
*/
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
#if defined (HAVE_COGL_GLES) || defined (HAVE_COGL_GL)
if (_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_GL_FIXED) &&
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
(layers_difference & COGL_PIPELINE_LAYER_STATE_POINT_SPRITE_COORDS))
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipelineState change = COGL_PIPELINE_LAYER_STATE_POINT_SPRITE_COORDS;
CoglPipelineLayer *authority =
_cogl_pipeline_layer_get_authority (layer, change);
CoglPipelineLayerBigState *big_state = authority->big_state;
_cogl_set_active_texture_unit (unit_index);
GE (ctx, glTexEnvi (GL_POINT_SPRITE, GL_COORD_REPLACE,
big_state->point_sprite_coords));
}
Dynamically load the GL or GLES library The GL or GLES library is now dynamically loaded by the CoglRenderer so that it can choose between GL, GLES1 and GLES2 at runtime. The library is loaded by the renderer because it needs to be done before calling eglInitialize. There is a new environment variable called COGL_DRIVER to choose between gl, gles1 or gles2. The #ifdefs for HAVE_COGL_GL, HAVE_COGL_GLES and HAVE_COGL_GLES2 have been changed so that they don't assume the ifdefs are mutually exclusive. They haven't been removed entirely so that it's possible to compile the GLES backends without the the enums from the GL headers. When using GLX the winsys additionally dynamically loads libGL because that also contains the GLX API. It can't be linked in directly because that would probably conflict with the GLES API if the EGL is selected. When compiling with EGL support the library links directly to libEGL because it doesn't contain any GL API so it shouldn't have any conflicts. When building for WGL or OSX Cogl still directly links against the GL API so there is a #define in config.h so that Cogl won't try to dlopen the library. Cogl-pango previously had a #ifdef to detect when the GL backend is used so that it can sneakily pass GL_QUADS to cogl_vertex_buffer_draw. This is now changed so that it queries the CoglContext for the backend. However to get this to work Cogl now needs to export the _cogl_context_get_default symbol and cogl-pango needs some extra -I flags to so that it can include cogl-context-private.h
2011-07-07 19:44:56 +00:00
#endif
cogl_object_ref (layer);
if (unit->layer != NULL)
cogl_object_unref (unit->layer);
unit->layer = layer;
unit->layer_changes_since_flush = 0;
flush_state->i++;
return TRUE;
}
static void
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_flush_common_gl_state (CoglPipeline *pipeline,
unsigned long pipelines_difference,
unsigned long *layer_differences,
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
CoglBool with_color_attrib)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipelineFlushLayerState state;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_flush_color_blend_alpha_depth_state (pipeline,
pipelines_difference,
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
with_color_attrib);
state.i = 0;
state.layer_differences = layer_differences;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_foreach_layer_internal (pipeline,
flush_layers_common_gl_state_cb,
&state);
}
/* Re-assert the layer's wrap modes on the given CoglTexture.
*
* Note: we don't simply forward the wrap modes to layer->texture
* since the actual texture being used may have been overridden.
*/
static void
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_layer_forward_wrap_modes (CoglPipelineLayer *layer,
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *texture)
{
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
CoglSamplerCacheWrapMode wrap_mode_s, wrap_mode_t, wrap_mode_p;
GLenum gl_wrap_mode_s, gl_wrap_mode_t, gl_wrap_mode_p;
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
if (texture == NULL)
return;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_layer_get_wrap_modes (layer,
&wrap_mode_s,
&wrap_mode_t,
&wrap_mode_p);
/* Update the wrap mode on the texture object. The texture backend
should cache the value so that it will be a no-op if the object
already has the same wrap mode set. The backend is best placed to
do this because it knows how many of the coordinates will
actually be used (ie, a 1D texture only cares about the 's'
coordinate but a 3D texture would use all three). GL uses the
wrap mode as part of the texture object state but we are
pretending it's part of the per-layer environment state. This
will break if the application tries to use different modes in
different layers using the same texture. */
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
if (wrap_mode_s == COGL_SAMPLER_CACHE_WRAP_MODE_AUTOMATIC)
gl_wrap_mode_s = GL_CLAMP_TO_EDGE;
else
gl_wrap_mode_s = wrap_mode_s;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
if (wrap_mode_t == COGL_SAMPLER_CACHE_WRAP_MODE_AUTOMATIC)
gl_wrap_mode_t = GL_CLAMP_TO_EDGE;
else
gl_wrap_mode_t = wrap_mode_t;
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
if (wrap_mode_p == COGL_SAMPLER_CACHE_WRAP_MODE_AUTOMATIC)
gl_wrap_mode_p = GL_CLAMP_TO_EDGE;
else
gl_wrap_mode_p = wrap_mode_p;
_cogl_texture_gl_flush_legacy_texobj_wrap_modes (texture,
gl_wrap_mode_s,
gl_wrap_mode_t,
gl_wrap_mode_p);
}
/* OpenGL associates the min/mag filters and repeat modes with the
* texture object not the texture unit so we always have to re-assert
* the filter and repeat modes whenever we use a texture since it may
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* be referenced by multiple pipelines with different modes.
*
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
* This function is bypassed in favour of sampler objects if
* GL_ARB_sampler_objects is advertised. This fallback won't work if
* the same texture is bound to multiple layers with different sampler
* state.
*/
static void
foreach_texture_unit_update_filter_and_wrap_modes (void)
{
int i;
_COGL_GET_CONTEXT (ctx, NO_RETVAL);
for (i = 0; i < ctx->texture_units->len; i++)
{
CoglTextureUnit *unit =
&g_array_index (ctx->texture_units, CoglTextureUnit, i);
if (unit->layer)
{
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
CoglTexture *texture = _cogl_pipeline_layer_get_texture (unit->layer);
Add a strong CoglTexture type to replace CoglHandle As part of the on going, incremental effort to purge the non type safe CoglHandle type from the Cogl API this patch tackles most of the CoglHandle uses relating to textures. We'd postponed making this change for quite a while because we wanted to have a clearer understanding of how we wanted to evolve the texture APIs towards Cogl 2.0 before exposing type safety here which would be difficult to change later since it would imply breaking APIs. The basic idea that we are steering towards now is that CoglTexture can be considered to be the most primitive interface we have for any object representing a texture. The texture interface would provide roughly these methods: cogl_texture_get_width cogl_texture_get_height cogl_texture_can_repeat cogl_texture_can_mipmap cogl_texture_generate_mipmap; cogl_texture_get_format cogl_texture_set_region cogl_texture_get_region Besides the texture interface we will then start to expose types corresponding to specific texture types: CoglTexture2D, CoglTexture3D, CoglTexture2DSliced, CoglSubTexture, CoglAtlasTexture and CoglTexturePixmapX11. We will then also expose an interface for the high-level texture types we have (such as CoglTexture2DSlice, CoglSubTexture and CoglAtlasTexture) called CoglMetaTexture. CoglMetaTexture is an additional interface that lets you iterate a virtual region of a meta texture and get mappings of primitive textures to sub-regions of that virtual region. Internally we already have this kind of abstraction for dealing with sliced texture, sub-textures and atlas textures in a consistent way, so this will just make that abstraction public. The aim here is to clarify that there is a difference between primitive textures (CoglTexture2D/3D) and some of the other high-level textures, and also enable developers to implement primitives that can support meta textures since they can only be used with the cogl_rectangle API currently. The thing that's not so clean-cut with this are the texture constructors we have currently; such as cogl_texture_new_from_file which no longer make sense when CoglTexture is considered to be an interface. These will basically just become convenient factory functions and it's just a bit unusual that they are within the cogl_texture namespace. It's worth noting here that all the texture type APIs will also have their own type specific constructors so these functions will only be used for the convenience of being able to create a texture without really wanting to know the details of what type of texture you need. Longer term for 2.0 we may come up with replacement names for these factory functions or the other thing we are considering is designing some asynchronous factory functions instead since it's so often detrimental to application performance to be blocked waiting for a texture to be uploaded to the GPU. Reviewed-by: Neil Roberts <neil@linux.intel.com>
2011-08-24 20:30:34 +00:00
if (texture != NULL)
{
CoglPipelineFilter min;
CoglPipelineFilter mag;
_cogl_pipeline_layer_get_filters (unit->layer, &min, &mag);
_cogl_texture_gl_flush_legacy_texobj_filters (texture, min, mag);
_cogl_pipeline_layer_forward_wrap_modes (unit->layer, texture);
}
}
}
}
typedef struct
{
int i;
unsigned long *layer_differences;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
} CoglPipelineCompareLayersState;
static CoglBool
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
compare_layer_differences_cb (CoglPipelineLayer *layer, void *user_data)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipelineCompareLayersState *state = user_data;
CoglTextureUnit *unit = _cogl_get_texture_unit (state->i);
if (unit->layer == layer)
state->layer_differences[state->i] = unit->layer_changes_since_flush;
else if (unit->layer)
{
state->layer_differences[state->i] = unit->layer_changes_since_flush;
state->layer_differences[state->i] |=
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_layer_compare_differences (layer, unit->layer);
}
else
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
state->layer_differences[state->i] = COGL_PIPELINE_LAYER_STATE_ALL_SPARSE;
/* XXX: There is always a possibility that a CoglTexture's
* underlying GL texture storage has been changed since it was last
* bound to a texture unit which is why we have a callback into
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* _cogl_pipeline_texture_storage_change_notify whenever a textures
* underlying GL texture storage changes which will set the
* unit->texture_intern_changed flag. If we see that's been set here
* then we force an update of the texture state...
*/
if (unit->texture_storage_changed)
state->layer_differences[state->i] |=
COGL_PIPELINE_LAYER_STATE_TEXTURE_DATA;
state->i++;
return TRUE;
}
typedef struct
{
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
CoglFramebuffer *framebuffer;
const CoglPipelineVertend *vertend;
const CoglPipelineFragend *fragend;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *pipeline;
unsigned long *layer_differences;
CoglBool error_adding_layer;
CoglBool added_layer;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
} CoglPipelineAddLayerState;
static CoglBool
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
vertend_add_layer_cb (CoglPipelineLayer *layer,
void *user_data)
{
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
CoglPipelineAddLayerState *state = user_data;
const CoglPipelineVertend *vertend = state->vertend;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipeline *pipeline = state->pipeline;
int unit_index = _cogl_pipeline_layer_get_unit_index (layer);
/* Either generate per layer code snippets or setup the
* fixed function glTexEnv for each layer... */
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
if (G_LIKELY (vertend->add_layer (pipeline,
layer,
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
state->layer_differences[unit_index],
state->framebuffer)))
state->added_layer = TRUE;
else
{
state->error_adding_layer = TRUE;
return FALSE;
}
return TRUE;
}
static CoglBool
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
fragend_add_layer_cb (CoglPipelineLayer *layer,
void *user_data)
{
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
CoglPipelineAddLayerState *state = user_data;
const CoglPipelineFragend *fragend = state->fragend;
CoglPipeline *pipeline = state->pipeline;
int unit_index = _cogl_pipeline_layer_get_unit_index (layer);
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
/* Either generate per layer code snippets or setup the
* fixed function glTexEnv for each layer... */
if (G_LIKELY (fragend->add_layer (pipeline,
layer,
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
state->layer_differences[unit_index])))
state->added_layer = TRUE;
else
{
state->error_adding_layer = TRUE;
return FALSE;
}
return TRUE;
}
/*
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* _cogl_pipeline_flush_gl_state:
*
* Details of override options:
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* ->fallback_mask: is a bitmask of the pipeline layers that need to be
* replaced with the default, fallback textures. The fallback textures are
* fully transparent textures so they hopefully wont contribute to the
* texture combining.
*
* The intention of fallbacks is to try and preserve
* the number of layers the user is expecting so that texture coordinates
* they gave will mostly still correspond to the textures they intended, and
* have a fighting chance of looking close to their originally intended
* result.
*
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* ->disable_mask: is a bitmask of the pipeline layers that will simply have
* texturing disabled. It's only really intended for disabling all layers
* > X; i.e. we'd expect to see a contiguous run of 0 starting from the LSB
* and at some point the remaining bits flip to 1. It might work to disable
* arbitrary layers; though I'm not sure a.t.m how OpenGL would take to
* that.
*
* The intention of the disable_mask is for emitting geometry when the user
* hasn't supplied enough texture coordinates for all the layers and it's
* not possible to auto generate default texture coordinates for those
* layers.
*
* ->layer0_override_texture: forcibly tells us to bind this GL texture name for
* layer 0 instead of plucking the gl_texture from the CoglTexture of layer
* 0.
*
* The intention of this is for any primitives that supports sliced textures.
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* The code will can iterate each of the slices and re-flush the pipeline
* forcing the GL texture of each slice in turn.
*
* ->wrap_mode_overrides: overrides the wrap modes set on each
* layer. This is used to implement the automatic wrap mode.
*
* XXX: It might also help if we could specify a texture matrix for code
* dealing with slicing that would be multiplied with the users own matrix.
*
* Normaly texture coords in the range [0, 1] refer to the extents of the
* texture, but when your GL texture represents a slice of the real texture
* (from the users POV) then a texture matrix would be a neat way of
* transforming the mapping for each slice.
*
* Currently for textured rectangles we manually calculate the texture
* coords for each slice based on the users given coords, but this solution
* isn't ideal, and can't be used with CoglVertexBuffers.
*/
void
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
_cogl_pipeline_flush_gl_state (CoglContext *ctx,
CoglPipeline *pipeline,
Re-design the matrix stack using a graph of ops This re-designs the matrix stack so we now keep track of each separate operation such as rotating, scaling, translating and multiplying as immutable, ref-counted nodes in a graph. Being a "graph" here means that different transformations composed of a sequence of linked operation nodes may share nodes. The first node in a matrix-stack is always a LOAD_IDENTITY operation. As an example consider if an application where to draw three rectangles A, B and C something like this: cogl_framebuffer_scale (fb, 2, 2, 2); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_translate (fb, 10, 0, 0); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_rotate (fb, 45, 0, 0, 1); cogl_framebuffer_draw_rectangle (...); /* A */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_draw_rectangle (...); /* B */ cogl_framebuffer_pop_matrix(fb); cogl_framebuffer_push_matrix(fb); cogl_framebuffer_set_modelview_matrix (fb, &mv); cogl_framebuffer_draw_rectangle (...); /* C */ cogl_framebuffer_pop_matrix(fb); That would result in a graph of nodes like this: LOAD_IDENTITY | SCALE / \ SAVE LOAD | | TRANSLATE RECTANGLE(C) | \ SAVE RECTANGLE(B) | ROTATE | RECTANGLE(A) Each push adds a SAVE operation which serves as a marker to rewind too when a corresponding pop is issued and also each SAVE node may also store a cached matrix representing the composition of all its ancestor nodes. This means if we repeatedly need to resolve a real CoglMatrix for a given node then we don't need to repeat the composition. Some advantages of this design are: - A single pointer to any node in the graph can now represent a complete, immutable transformation that can be logged for example into a journal. Previously we were storing a full CoglMatrix in each journal entry which is 16 floats for the matrix itself as well as space for flags and another 16 floats for possibly storing a cache of the inverse. This means that we significantly reduce the size of the journal when drawing lots of primitives and we also avoid copying over 128 bytes per entry. - It becomes much cheaper to check for equality. In cases where some (unlikely) false negatives are allowed simply comparing the pointers of two matrix stack graph entries is enough. Previously we would use memcmp() to compare matrices. - It becomes easier to do comparisons of transformations. By looking for the common ancestry between nodes we can determine the operations that differentiate the transforms and use those to gain a high level understanding of the differences. For example we use this in the journal to be able to efficiently determine when two rectangle transforms only differ by some translation so that we can perform software clipping. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f75aee93f6b293ca7a7babbd8fcc326ee6bf7aef)
2012-02-20 15:59:48 +00:00
CoglFramebuffer *framebuffer,
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
CoglBool with_color_attrib,
CoglBool unknown_color_alpha)
{
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
CoglPipeline *current_pipeline = ctx->current_pipeline;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
unsigned long pipelines_difference;
int n_layers;
unsigned long *layer_differences;
int i;
CoglTextureUnit *unit1;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
const CoglPipelineProgend *progend;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
COGL_STATIC_TIMER (pipeline_flush_timer,
"Mainloop", /* parent */
"Material Flush",
"The time spent flushing material state",
0 /* no application private data */);
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
COGL_TIMER_START (_cogl_uprof_context, pipeline_flush_timer);
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
/* Bail out asap if we've been asked to re-flush the already current
* pipeline and we can see the pipeline hasn't changed */
if (current_pipeline == pipeline &&
ctx->current_pipeline_age == pipeline->age &&
ctx->current_pipeline_with_color_attrib == with_color_attrib &&
ctx->current_pipeline_unknown_color_alpha == unknown_color_alpha)
goto done;
else
{
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
/* Update derived state (currently just the 'real_blend_enable'
* state) and determine a mask of state that differs between the
* current pipeline and the one we are flushing.
*
* Note updating the derived state is done before doing any
* pipeline comparisons so that we can correctly compare the
* 'real_blend_enable' state itself.
*/
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
if (current_pipeline == pipeline)
{
pipelines_difference = ctx->current_pipeline_changes_since_flush;
if (pipelines_difference & COGL_PIPELINE_STATE_AFFECTS_BLENDING ||
pipeline->unknown_color_alpha != unknown_color_alpha)
{
CoglBool save_real_blend_enable = pipeline->real_blend_enable;
_cogl_pipeline_update_real_blend_enable (pipeline,
unknown_color_alpha);
if (save_real_blend_enable != pipeline->real_blend_enable)
pipelines_difference |= COGL_PIPELINE_STATE_REAL_BLEND_ENABLE;
}
}
else if (current_pipeline)
{
pipelines_difference = ctx->current_pipeline_changes_since_flush;
_cogl_pipeline_update_real_blend_enable (pipeline,
unknown_color_alpha);
pipelines_difference |=
_cogl_pipeline_compare_differences (ctx->current_pipeline,
pipeline);
}
else
{
_cogl_pipeline_update_real_blend_enable (pipeline,
unknown_color_alpha);
pipelines_difference = COGL_PIPELINE_STATE_ALL;
}
}
/* Get a layer_differences mask for each layer to be flushed */
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
n_layers = cogl_pipeline_get_n_layers (pipeline);
if (n_layers)
{
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
CoglPipelineCompareLayersState state;
layer_differences = g_alloca (sizeof (unsigned long) * n_layers);
memset (layer_differences, 0, sizeof (unsigned long) * n_layers);
state.i = 0;
state.layer_differences = layer_differences;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_foreach_layer_internal (pipeline,
compare_layer_differences_cb,
&state);
}
else
layer_differences = NULL;
/* First flush everything that's the same regardless of which
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* pipeline backend is being used...
*
* 1) top level state:
* glColor (or skip if a vertex attribute is being used for color)
* blend state
* alpha test state (except for GLES 2.0)
*
* 2) then foreach layer:
* determine gl_target/gl_texture
* bind texture
*
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* Note: After _cogl_pipeline_flush_common_gl_state you can expect
* all state of the layers corresponding texture unit to be
* updated.
*/
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_flush_common_gl_state (pipeline,
pipelines_difference,
layer_differences,
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
with_color_attrib);
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
/* Now flush the fragment, vertex and program state according to the
* current progend backend.
*
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
* Note: Some backends may not support the current pipeline
* configuration and in that case it will report and error and we
* will look for a different backend.
*
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
* NB: if pipeline->progend != COGL_PIPELINE_PROGEND_UNDEFINED then
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* we have previously managed to successfully flush this pipeline
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
* with the given progend so we will simply use that to avoid
* fallback code paths.
*/
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
if (pipeline->progend == COGL_PIPELINE_PROGEND_UNDEFINED)
_cogl_pipeline_set_progend (pipeline, COGL_PIPELINE_PROGEND_DEFAULT);
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
for (i = pipeline->progend;
i < COGL_PIPELINE_N_PROGENDS;
i++, _cogl_pipeline_set_progend (pipeline, i))
{
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
const CoglPipelineVertend *vertend;
const CoglPipelineFragend *fragend;
CoglPipelineAddLayerState state;
progend = _cogl_pipeline_progends[i];
if (G_UNLIKELY (!progend->start (pipeline)))
continue;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
vertend = _cogl_pipeline_vertends[progend->vertend];
vertend->start (pipeline,
n_layers,
pipelines_difference);
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
state.framebuffer = framebuffer;
state.vertend = vertend;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
state.pipeline = pipeline;
state.layer_differences = layer_differences;
state.error_adding_layer = FALSE;
state.added_layer = FALSE;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
_cogl_pipeline_foreach_layer_internal (pipeline,
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
vertend_add_layer_cb,
&state);
if (G_UNLIKELY (state.error_adding_layer))
continue;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
if (G_UNLIKELY (!vertend->end (pipeline, pipelines_difference)))
continue;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
/* Now prepare the fragment processing state (fragend)
*
* NB: We can't combine the setup of the vertend and fragend
* since the backends that do code generation share
* ctx->codegen_source_buffer as a scratch buffer.
*/
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
fragend = _cogl_pipeline_fragends[progend->fragend];
state.fragend = fragend;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
fragend->start (pipeline,
n_layers,
pipelines_difference);
_cogl_pipeline_foreach_layer_internal (pipeline,
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
fragend_add_layer_cb,
&state);
if (G_UNLIKELY (state.error_adding_layer))
continue;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
if (!state.added_layer)
{
if (fragend->passthrough &&
G_UNLIKELY (!fragend->passthrough (pipeline)))
continue;
}
if (G_UNLIKELY (!fragend->end (pipeline, pipelines_difference)))
continue;
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
if (progend->end)
progend->end (pipeline, pipelines_difference);
break;
}
/* FIXME: This reference is actually resulting in lots of
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* copy-on-write reparenting because one-shot pipelines end up
* living for longer than necessary and so any later modification of
* the parent will cause a copy-on-write.
*
* XXX: The issue should largely go away when we switch to using
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* weak pipelines for overrides.
*/
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
cogl_object_ref (pipeline);
if (ctx->current_pipeline != NULL)
cogl_object_unref (ctx->current_pipeline);
ctx->current_pipeline = pipeline;
ctx->current_pipeline_changes_since_flush = 0;
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
ctx->current_pipeline_with_color_attrib = with_color_attrib;
ctx->current_pipeline_unknown_color_alpha = unknown_color_alpha;
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
ctx->current_pipeline_age = pipeline->age;
done:
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
progend = _cogl_pipeline_progends[pipeline->progend];
/* We can't assume the color will be retained between flushes when
* using the glsl progend because the generic attribute values are
* not stored as part of the program object so they could be
* overridden by any attribute changes in another program */
pipeline: improve real_blend_enable checks Since _cogl_pipeline_update_blend_enable() can sometimes show up quite high in profiles; instead of calling _cogl_pipeline_update_blend_enable() whenever we change pipeline state that may affect blending we now just set a dirty flag and when we flush a pipeline we check this dirty flag and lazily calculate whether blender really needs to be enabled if it's set. Since it turns out we were too optimistic in assuming most GL drivers would recognize blending with ADD(src,0) is equivalent to disabling GL_BLEND we now check this case ourselves so we can always explicitly disable GL_BLEND if we know we don't need blending. This introduces the idea of an 'unknown_color_alpha' boolean to the pipeline flush code which is set whenever we can't guarantee that the color attribute is opaque. For example this is set whenever a user specifies a color attribute with 4 components when drawing a primitive. This boolean needs to be cached along with every pipeline because pipeline::real_blend_enabled depends on this and so we need to also call _cogl_pipeline_update_blend_enable() if the status of this changes. Incidentally with this patch we now no longer ever use _cogl_pipeline_set_blend_enable() internally. For now the internal api hasn't been removed though since we might want to consider re-purposing it as a public api since it will now not conflict with our own internal state tracking and could provide a more convenient way to disable blending than setting a blend string. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit ab2ae18f3207514c91fa6fd9f2d3f2ed93a86497)
2013-05-16 14:19:30 +00:00
if (pipeline->progend == COGL_PIPELINE_PROGEND_GLSL && !with_color_attrib)
{
int attribute;
CoglPipeline *authority =
_cogl_pipeline_get_authority (pipeline, COGL_PIPELINE_STATE_COLOR);
int name_index = COGL_ATTRIBUTE_COLOR_NAME_INDEX;
attribute =
_cogl_pipeline_progend_glsl_get_attrib_location (pipeline, name_index);
if (attribute != -1)
GE (ctx,
glVertexAttrib4f (attribute,
cogl_color_get_red_float (&authority->color),
cogl_color_get_green_float (&authority->color),
cogl_color_get_blue_float (&authority->color),
cogl_color_get_alpha_float (&authority->color)));
}
Clearly define 3 progends that own the frag+vertends This adds a new "fixed-arbfp" progend so we now have 3 distinct ways of setting up the state of a pipeline: » fixed; where the vertex and fragment processing are implemented using fixed function opengl apis. » fixed-arbfp; where vertex processing is implemented using fixed function opengl apis but fragment processing is implemented using the ARB Fragment Processing language. » glsl; there vertex and fragment processing are both implemented using glsl. This means we avoid unusual, combinations such as glsl for vertex processing and arbfp for fragment processing, and also avoid pairing fixed-function vertex processing with glsl fragment processing which we happen to know hits some awkward code paths in Mesa that lead to poor performance. As part of this change, the progend now implies specific vertend and fragend choices so instead of associating a vertend and fragend with a pipeline we now just associate a progend choice. When flushing a pipeline and choosing what progend to use, we now call a progend->start() method that is able to determine if the vertend and fragend together will be able to handle the given pipeline so the vertend and fragend ->start() methods no longer need to return a boolean status. Since we now don't need to support glsl used in conjunction with fixed function this will allow us to avoid ever using OpenGL builtin attribute names, though this patch doesn't change that yet. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit cec381f50c7a2f2186bd4a8c5f38fecd5f099075)
2012-09-25 20:08:10 +00:00
/* Give the progend a chance to update any uniforms that might not
* depend on the material state. This is used on GLES2 to update the
* matrices */
if (progend->pre_paint)
progend->pre_paint (pipeline, framebuffer);
/* Handle the fact that OpenGL associates texture filter and wrap
* modes with the texture objects not the texture units... */
if (!_cogl_has_private_feature (ctx, COGL_PRIVATE_FEATURE_SAMPLER_OBJECTS))
Use GL_ARB_sampler_objects GL_ARB_sampler_objects provides a GL object which overrides the sampler state part of a texture object with different values. The sampler state that Cogl currently exposes is the wrap modes and filters. Cogl exposes the state as part of the pipeline layer state but without this extension GL only exposes it as part of the texture object state. This means that it won't work to use a single texture multiple times in one primitive with different sampler states. It also makes switching between different sampler states with a single texture not terribly efficient because it has to change the texture object state every time. This patch adds a cache for sampler states in a shared hash table attached to the CoglContext. The entire set of parameters for the sampler state is used as the key for the hash table. When a unique state is encountered the sampler cache will create a new entry, otherwise it will return a const pointer to an existing entry. That means we can have a single pointer to represent any combination of sampler state. Pipeline layers now just store this single pointer rather than storing all of the sampler state. The two separate state flags for wrap modes and filters have now been combined into one. It should be faster to compare the sampler state now because instead of comparing each value it can just compare the pointers to the cached sampler entries. The hash table of cached sampler states should only need to perform its more expensive hash on the state when a property is changed on a pipeline, not every time it is flushed. When the sampler objects extension is available each cached sampler state will also get a sampler object to represent it. The common code to flush the GL state will now simply bind this object to a unit instead of flushing the state though the CoglTexture when possible. Reviewed-by: Robert Bragg <robert@linux.intel.com>
2012-04-04 21:20:04 +00:00
foreach_texture_unit_update_filter_and_wrap_modes ();
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
/* If this pipeline has more than one layer then we always need
* to make sure we rebind the texture for unit 1.
*
* NB: various components of Cogl may temporarily bind arbitrary
* textures to texture unit 1 so they can query and modify texture
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
* object parameters. cogl-pipeline.c (See
* _cogl_bind_gl_texture_transient)
*/
unit1 = _cogl_get_texture_unit (1);
if (cogl_pipeline_get_n_layers (pipeline) > 1 && unit1->dirty_gl_texture)
{
_cogl_set_active_texture_unit (1);
GE (ctx, glBindTexture (unit1->gl_target, unit1->gl_texture));
unit1->dirty_gl_texture = FALSE;
}
cogl: rename CoglMaterial -> CoglPipeline This applies an API naming change that's been deliberated over for a while now which is to rename CoglMaterial to CoglPipeline. For now the new pipeline API is marked as experimental and public headers continue to talk about materials not pipelines. The CoglMaterial API is now maintained in terms of the cogl_pipeline API internally. Currently this API is targeting Cogl 2.0 so we will have time to integrate it properly with other upcoming Cogl 2.0 work. The basic reasons for the rename are: - That the term "material" implies to many people that they are constrained to fragment processing; perhaps as some kind of high-level texture abstraction. - In Clutter they get exposed by ClutterTexture actors which may be re-inforcing this misconception. - When comparing how other frameworks use the term material, a material sometimes describes a multi-pass fragment processing technique which isn't the case in Cogl. - In code, "CoglPipeline" will hopefully be a much more self documenting summary of what these objects represent; a full GPU pipeline configuration including, for example, vertex processing, fragment processing and blending. - When considering the API documentation story, at some point we need a document introducing developers to how the "GPU pipeline" works so it should become intuitive that CoglPipeline maps back to that description of the GPU pipeline. - This is consistent in terminology and concept to OpenGL 4's new pipeline object which is a container for program objects. Note: The cogl-material.[ch] files have been renamed to cogl-material-compat.[ch] because otherwise git doesn't seem to treat the change as a moving the old cogl-material.c->cogl-pipeline.c and so we loose all our git-blame history.
2010-10-27 17:54:57 +00:00
COGL_TIMER_STOP (_cogl_uprof_context, pipeline_flush_timer);
}