Commit 92a375ab4 changed the initial value of max_texcoord_attrib_unit
to -1 so that it could disable the texture coord array for the first
texture unit when there are no texture coords used in the vbo. However
max_texcoord_attrib_unit was an unsigned value so this actually became
G_MAXUINT. The disabling loop at the bottom still worked because
G_MAXUINT+1==0 but the check for whether any texture unit is greater
than max_texcoord_attrib_unit was failing so it would always end up
disabling all texture units. This is now fixed by changing
max_texcoord_attrib_unit to be signed.
The commit ecbb7ce41a exposed some issues
when positioning the cursor with the mouse pointer: the selection is
not moved along with the cursor when inserting a single character or a
string.
Also, some freeze_notify() are called too early, leading to decoupling
from their respective thaw_notify().
http://bugzilla.openedhand.com/show_bug.cgi?id=1955
The documentation for ClutterGroup behaviour when setting an explicit
size is not accurate - or, actually, it was accurate by the time
ClutterGroup was first written but has been neglected in the following
release cycles.
To avoid confusion for new users of Clutter the documentation should be
slightly expanded, mentioning the exact semantics of ClutterGroup with
regards to: preferred size, explicitly set size and how to constrain the
visible area of a ClutterGroup to an explicitly set size.
Based on a patch by: Neil Roberts <neil@linux.intel.com>
When we disable the per-actor events delivery Clutter replicates the X11
implicit soft grab for motion events with off-stage. The implicit grab
is done whenever the pointer of a device leaves a window with a button
still pressed; with the implicit grab in place the window still receives
motion events even after the LeaveNotify - until the button is released.
The implicit grab is not honoured in the per-actor event deliver case,
though, so we have a mismatch between two in theory equivalent cases.
Luckily, the fix is pretty trivial: when we check for a motion event
with a stage set but without an actor set, and that has off-stage
coordinates, we arbitrarily set the source to be the stage of the event
and emit the pointer event.
When deciding if a material layer is equal it now compares the GL
target and texture number if the textures are not sliced. This is
needed to get batching across atlased textures.
Cogl accepts a pixel format for both the data in memory and the
internal format to be used for the texture. If they do not match then
it would convert them using the CoglBitmap functions before uploading
the data. However, GL also lets you specify both formats so it makes
more sense to let GL do the conversion. The driver may need the
texture in a specific format so it may end up being converted anyway.
The cogl_texture_upload_data functions have been removed and replaced
with a single function to prepare the bitmap. This will only do the
premultiplication conversion because that is the only part that GL
can't do directly.
The premult part of _cogl_convert_premult has now been split out as
_cogl_convert_premult_status. _cogl_convert_premult has been renamed
to _cogl_convert_format to make it less confusing. The premult
conversion is now done in-place instead of copying the
buffer. Previously it was copying the buffer once for the format
conversion and then copying it again for the premult conversion. The
premult conversion never changes the size of the buffer so it's quite
easy to do in place. We can also use the separated out function
independently.
The internal format of the atlas texture is still set to the
appropriate format so Cogl will disable blending for textures that are
intended to be RGB. This should end up ignoring the alpha channel from
the texture in the atlas. This makes the code slightly easier to
maintain and should also improve the chances of batching.
Since we're allowing allocation cycles saying that calling
queue_relayout() inside an allocation cycle "is not allowed" is kind of
confusing. We should say that "it is not recommended".
* device-manager: (37 commits)
x11: Re-enable XI1 extension keyboards
x11: Always handle core device events before XI events
docs: Documentation fixes for DeviceManager
device-manager: Fix the signals definition
docs: Add sections for InputDevice and DeviceManager
docs: Add clutter_input_device_get_device_name()
tests: Print out the device details on motion
Always register core devices
device: Remove unused is_default member
win32: Experimental implementation of device support
tests: Print the device name, as well as its Id
x11: Fill out the :name property of the InputDevices
device: Add the :name property to InputDevice
x11: Store core devices on the X11 Backend singleton
device: Unset the cursor actor when leaving the stage
device: Add pointer actor getter
x11: Discard the LeaveNotify for off-stage ButtonRelease
device: Do not overwrite the stage for an InputDevice
event: Off-stage button releases have a click count of 1
event: Scroll events do not have click count
...
Added a "selection-bound" notify on clutter_text_clear_selection as it
changes the value.
Added utility function clutter_text_set_positions, in order to
change both cursor position and selection bound inside a
g_object_[freeze/thaw]_notify block
Added g_object_[freeze/thaw]_notify in other functions that changes
both cursor position and selection bound
Solves http://bugzilla.openedhand.com/show_bug.cgi?id=1955
ClutterStage has both set_key_focus() and get_key_focus() methods, but
there is no :key-focus property. This means that it is not possible to
get notifications when the key-focus has changes except by connecting to
both the ::key-focus-in and ::key-focus-out signals and do additional
bookkeeping.
http://bugzilla.openedhand.com/show_bug.cgi?id=1956
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
The TimeoutPool is not used by ClutterTimeline any more, so we need to
remove a sentence from its description. We also need to fix the gtk-doc
syntax errors.
Instead of assigning a new colour to each quad of a batch, the
rectangle debugging code now assigns a new colour to each batch so
that it can be used to visually see what is being batched. The colour
is stored in a global variable that is reset during cogl_clear. This
improves the chances that the same colour will be used for a batch in
the next frames to avoid flickering.
When setting up the state for the vertex buffer,
enable_state_for_drawing_buffer tries to keep track of the highest
numbered texture unit in use. It then disables any texture arrays for
units that were previously enabled if they are greater than that
number. However if there is no texturing in the VBO then the max used
unit would be left at 0 which it would later think meant unit 0 is
still in use so it wouldn't disable it. To fix this it now initialises
the max used unit to -1 which it should interpret as ‘no units are in
use’ so it will later disable the arrays for all units.
Thanks to Jon Mayo for reporting the bug.
http://bugzilla.openedhand.com/show_bug.cgi?id=1957
We were checking the number of texture units against the GL enum that is
used in glGetInteger() to query that number. Let's abstract this in a
little function.
Took the opportunity to dig a bit on the usage of GL limits for the
number of texture (image) units and document our use of them. We'll need
something finer grained if we want to fully exploit texture image units
with a programmable pipeline.
The index field of CoglTextureUnit was never set, leading to the
creation of units with index set to 0. When trying to retrieve a texture
unit by its index (!= 0) with _cogl_get_texture_unit(), a new one was
created as it could not find it back in the list of textures units:
ctx->texture_units.
http://bugzilla.openedhand.com/show_bug.cgi?id=1958
The :opacity property is defined using a GParamSpecUchar. This usually
leads to issues with language bindings that don't have an 'unsigned
char' type and that need to explicitly handle the conversion between
G_TYPE_UCHAR and G_TYPE_INT or G_TYPE_UINT.
The property definition already specifies an interval size of [0, 255]
on the values; more importantly, GObject already implicitly transforms
between G_TYPE_UCHAR and G_TYPE_UINT (the GValue transformation
functions are registered at type system initialization time) so
switching between a GParamSpecUchar and a GParamSpecUint should not be
an ABI break.
I have tested a simple program using the opacity property before and
after the change and I cannot see any run-time warnings related to this
issue.
Be more drastic if the internal state is broken, and assert() if the
expected Alpha and Timeline instances we need are not valid. This
usually implies a library bug or a massive heap corruption.
The Animation code does transformation of values between type A and A'
after checking for compatibility using g_value_type_compatible(). This
is incorrect: compatibility means that the two types can be copied. The
correct conversion should follow:
if (compatible (type (A), type (A')))
copy (A, A');
else
if (transformable (type (A), type (A')))
transform (A, A');
else
error("Unable to trasform type A in A'");
The transformation might still fail, so we need to check for errors
there as well as a fall-through case.
We should not just check for compatibility, but also for the ability to
transform a GValue of type A into another of type A'.
Usually compatibility is enough, especially if types can be
introspected beforehand; some times, though, we also need to check for
transformability as a type can provide the transformation functions
necessary for the operation.
The commit 1c69c61745 which improved the
protection against timeline removals during the master clock advancement
was only doing half the job - and actually broke the chaining of
animations inside the ::completed signal.
We cannot simply take a reference on the timelines and still use the list
held by the master clock because the do_tick() might result in the
creation of a new timeline, which gets added at the end of the list with
no reference increase and thus gets disposed at the end of the iteration.
We also cannot steal the master clock timelines list because a timeline
might be removed as the direct result of do_tick() and remove_timeline()
would not find the timeline, failing and leaving a dangling pointer
behind.
For this reason we copy the list of timelines out of the one that the
Master Clock holds, take a reference on each timeline, advance them all,
release the reference and free the list.
The extension keyboard support in XInput 1.x is hopelessly broken.
Nevertheless, it's possible to use some bits of it, as we prefer the
core keyboard events to the XInput events, thus at least having proper
handling for X11 key events on the Stage window.
The XI 1.0 layer is complementary to the X11 core devices handling; this
means that core events will still be emitted for the core pointer and
keyboard devices, and that secondary (floating) devices should be
handled on top of that.
Thus, the XI event handling code should be executed (if explicitly
compiled in and enabled) if the core device events have not been parsed.
Note: this is going away with XI2, which completely replaces both core and
XI1 events.
Even with XInput support we should always register core devices. This
allows us to handle enter and leave events correctly on the Stage and
to have a working XInput 1.x support in Clutter.
Mostly lifted from the core pointer and keyboard X11 backend support.
The win32 backend registers two devices (a core pointer and a core
keyboard) and assigns them to the event structure when doing the
translation from native events to Clutter events.
Thanks to: Samuel Degrande <Samuel.Degrande@lifl.fr> for testing this
patch.
Instead of overloading the device id of 0 and 1 we should treat the core
devices as special, and have a pointer inside the X11 backend singleton
structure, for fast access.
When an InputDevice leaves a stage we set the stage member of
InputDevice to NULL. We should also unset the cursor_actor (as the
device is obviously not on an actor any more).
When the device re-enters the Stage the ENTER/LEAVE event generation
machinery will then be able to emit the ENTER event on the Stage.
If the user presses a button on a pointer device and then moves out the
Stage X11 will emit the following events:
LeaveNotify ➔ MotionNotify ... ➔ ButtonRelease ➔ LeaveNotify
The second LeaveNotify differs from the first by the state field.
Unfortunately, ClutterCrossingEvent doesn't have a modifier_state field
like other events, so we cannot provide a way for programmatically
distinguishing them from a Clutter perspective. This is also an X11-ism
we might not even want to replicate on every backend with sane
enter/leave semantics.
For this reason we should check inside the X11 event processing if the
pointer device has already left the Stage and ignore the second
LeaveNotify.
The Stage field of an InputDevice is set by the backend, whenever the
pointer enters or leaves the Stage. The Stage should not overwrite the
stage field for every event it processes.
The previous state for the device is used by the click count machinery
and we should not be overwriting it at every event; instead, we should
use a parallel storage for the current state coming from the windowing
system.
The device manager does not need to update the state of the devices
when the user has disabled the delivery of motion events to actors:
the events will always be delivered as they are to the stage.
The LEAVE/ENTER event pairs should be queued during the InputDevice
update process, when we change the actor under the device pointer.
This commit cleans up the event emission code inside clutter-main.c
and the logic of the event processing.
The InputDevice objects stores pointer coordinates, state, stage and
the actor under the cursor, so if the current backend provides us with
one attached to the Event structure then we want the InputDevice itself
to update its state and give us the ClutterActor underneath the
pointer's cursor.
Even when we are not using XInput we now have fallback devices; the
X11 backend should always assign the default devices when translating
the X events to Clutter events.
Use the device manager to store the input devices. Also, provide
two fallback devices when initializing the X11 backend: device 0
for the pointer and device 1 for the keyboard.
Previously the atlas textures were being created with whatever format
the first sub texture is in. Only three formats are supported so this
only matters if the first texture is a premultiplied alpha
texture. Instead it now masks out the premultiplied bit so that the
textures are always either RGB_888 or RGBA_8888.
The win32 backend now handles the WM_SETCURSOR message and sets a
fully transparent cursor if the cursor-visible property has been
cleared on the stage. The icon is stored in the library via a resource
file. The instance handle for the DLL is needed to load the resource
so there is now a DllMain function to grab the handle.
g_list_foreach has better protection against the current node being
removed. This will happen for example if someone calls
clutter_container_foreach(container, clutter_actor_destroy). This was
causing valgrind errors for the conformance tests which do just that.
When uploading texture data it was just calling cogl_texture_set_data
on the large texture. This would attempt to convert the data to the
format of the large texture. All of the textures with alpha channels
are stored together regardless of whether they are premultiplied so
this was causing premultiplied textures to be unpremultiplied
again. It now just uploads the data ignoring the premult bit of the
format so that it only gets converted once.
With the atlas texture backend ensuring the mipmaps can make it become
a completely different texture which will have different texture
coordinates or may even be sliced. Therefore we need to ensure the
mipmaps before deciding which quads to log in the journal. This adds a
new private function to cogl-material which ensures the mipmaps if
needed.
The sub texture backend doesn't work well as a completely general
texture backend because for example when rendering with cogl_polygon
it needs to be able to tranform arbitrary texture coordinates without
reference to the other coordintes. This can't be done when the texture
coordinates are a multiple of one because sometimes the coordinate
should represent the left or top edge and sometimes it should
represent the bottom or top edge. For example if the s coordinates are
0 and 1 then 1 represents the right edge but if they are 1 and 2 then
1 represents the left edge.
Instead the sub-textures are now documented not to support coordinates
outside the range [0,1]. The coordinates for the sub-region are now
represented as integers as this helps avoid rounding issues. The
region can no longer be a super-region of the texture as this
simplifies the code quite a lot.
There are two new texture virtual functions:
transform_quad_coords_to_gl - This transforms two pairs of coordinates
representing a quad. It will return FALSE if the coordinates can
not be transformed. The sub texture backend uses this to detect
coordinates that require repeating which causes cogl-primitives
to use manual repeating.
ensure_non_quad_rendering - This is used in cogl_polygon and
cogl_vertex_buffer to inform the texture backend that
transform_quad_to_gl is going to be used. The atlas backend
migrates the texture out of the atlas when it hits this.
When calculating the next integer position for negative coordinates it
would not increment if the position is already a multiple of one so we
need to manually add one.
When try_creating_fbo fails it returns 0 to report the error and if it
succeeds it returns ‘flags’. However cogl_offscreen_new_to_texture
also passes in 0 for the flags as the last fallback to create the fbo
with nothing but the color buffer. In that case it will return 0
regardless of whether it succeeded so the last fallback will always be
considered a failure.
To fix this it now just returns a gboolean to indicate whether it
succeeded and the flags used for each attempt is assigned when passing
the argument rather than from the return value of the function.
Also if the only configuration that succeeded was with flags==0 then
it would always try all combinations because last_working_flags would
also be zero. To avoid this it now uses a separate gboolean to mark
whether we found a successful set of flags.
http://bugzilla.openedhand.com/show_bug.cgi?id=1873
Use the newly-added profiling timers inside the master clock dispatch
function to see how much time we spend:
• in the whole function
• in the event processing for each stage
• in the timeline advancement
Reading back the texture data in unrealize does not seem like a
desirable feature any more, clutter has evolved a lot since it was
implemented.
What's wrong with it now:
* It takes *a lot* of time to read the data back with glReadPixel(),
* When several textures share the same CoglTexture, the same data can
be read back multiple times,
* If the underlying material uses multiple texture units, only the
first one was copied back,
* In ClutterCairoTexture, we end up having two separate copies of the
data,
* GL actually manages texture memory accross system/video memory
for us!
For all the reasons above, let's get rid of the glReadPixel() in
Texture::unrealize()
Fixes: OHB#1842
Since 755cce33a7 the framebuffer code is using the GL enums
GL_DEPTH_ATTACHMENT and GL_DEPTH_COMPONENT16. These aren't available
directly under GLES except with the OES suffix so we need to define
them manually as we do with the other framebuffer constants.
These macros used to define Cogl wrappers for the GLenum values. There are
now Cogl enums everywhere in the API where these were required so we
shouldn't need them anymore. They were in the public headers but as
they are not neccessary and were not in the API docs for Clutter 1.0
it should be safe to remove them.
Using the ::event signal to match the CLUTTER_DELETE event type (and
block the stage destruction) can be costly, since it means checking
every single event.
The ::delete-event signal is similar in spirit to any other specialized
signal handler dealing with events, and retains the same semantics.
If a user supplied multiple groups of texture coordinates with
cogl_rectangle_with_multitexture_coords() then we would repeatedly log only
the first group in the journal. This fixes that bug and adds a conformance
test to verify the fix.
Thanks to Gord Allott for reporting this bug.
The Intel drivers in Mesa 7.6 (and possibly earlier versions) don't
support creating FBOs with a stencil buffer but without a depth
buffer. This reworks framebuffer allocation so that we try a number
of fallback options before failing.
The options we try in order are:
- the same options that were sucessful last time if available
- combined depth and stencil
- separate depth and stencil
- just stencil, no depth
- just depth, no stencil
- neither depth or stencil
Allow the user of the ClutterMedia interface to specify a Pango font
description to display subtitles. Even if the underlying implementation
of the interface does not natively use Pange, it must be capable of
parsing the grammar that pango_font_description_from_string() accepts.
Some source files should not be passed through the introspection parser,
as they are fully private and do not expose any valuable API.
Also the clutter-profile.h header is private and should not be
installed.
We weren't taking a reference on the texture to be used as the color buffer
for offscreen rendering, so it was possible to free the texture leaving the
framebuffer in an inconsistent state.
This adds gives Cogl a dedicated UProf context which will be linked together
with Clutter's context during clutter_init_real().
Initial timers cover _cogl_journal_flush and _cogl_journal_log_quad
You can explicitly ask for a report of Cogl statistics by exporting
COGL_PROFILE_OUTPUT_REPORT=1 but since the context is linked with Clutter's
the statisitcs will also be shown in the automatic Clutter reports.
This suspends and resumes all uprof timers and counters except while dealing
with picking, so as to give more focused statistics.
Be aware that there are still some issues with this profile option since
there are a few special case counters and timers that shouldn't be
suspended; noteably the frame counters are incorrect so the per frame stats
can't be trusted.
As we have for debugging, this adds the ability to control profiling flags
either via the command line or an environment variable.
The first option added is CLUTTER_PROFILE=disable-report
This also changes the reporting to be opt-out so you don't need to export
CLUTTER_PROFILE_OUTPUT_REPORT=1 to see a report but you can use
CLUTTER_PROFILE=disable-report to disable it if desired.
UProf is a small library that aims to help applications/libraries provide
domain specific reports about performance. It currently provides high
precision timer primitives (rdtsc on x86) and simple counters, the ability
to link statistics between optional components at runtime and makes report
generation easy.
This adds initial accounting for:
- Total mainloop time
- Painting
- Picking
- Layouting
- Idle time
The timing done by uprof is of wall clock time. It's not based on stochastic
samples we simply sample a counter at the start and end. When dealing with
the complexities of GPU drivers and with various kinds of IO this form of
profiling can be quite enlightening as it will be able to represent where
your application is blocking unlike tools such as sysprof.
To enable uprof accounting you must configure Clutter with --enable-profile
and have uprof-0.2 installed from git://git.moblin.org/uprof
If you want to see a report of statistics when Clutter applications exit you
should export CLUTTER_PROFILE_OUTPUT_REPORT=1 before running them.
Just a final word of caution; this stuff is new and the manual nature of
adding uprof instrumentation means it is prone to some errors when modifying
code. This just means that when you question strange results don't rule out
a mistake in the instrumentation. Obviously though we hope the benfits out
weigh e.g. by focusing on very key stats and by having automatic reporting.
Since asking for ARGB by default is still somewhat experimental on X11
and not every toolkit or complex widgets (like WebKit) still do not like
dealing with ARGB visuals, we should switch back to RGB by default - now
that at least we know it works.
For applications (and toolkit integration libraries) that want to enable
the ClutterStage:use-alpha property there is a new function:
void clutter_x11_set_use_argb_visual (gboolean use_argb);
which needs to be called before clutter_init().
The CLUTTER_DISABLE_ARGB_VISUAL environment variable can still be used
to force this value off at run-time.
Currently, ClutterActor detects a relayout cycle (an actor causing a
relayout to be queued from within an allocate() function) and aborts
after printing out a warning. This might be a little bit too anal
retentive, and it currently breaks GTK+ embedding inside clutter-gtk
so we should probably relax the behaviour a bit. Now we just emit the
warning but we still go ahead with the relayout.
When Clutter tries to pick an ARGB visual it tried to set the
GLX_TRANSPARENT_TYPE attribute of the FBConfig to
GLX_TRANSPARENT_RGB. However the code to do this was broken so that it
was actually trying to set the non-existant attribute number 0x8008
instead. Mesa silently ignored this so it appeared as if it was
working but the Nvidia drivers do not like it.
It appears that the TRANSPARENT_TYPE attribute is not neccessary for
getting an ARGB visual anyway and instead it is intended to support
color-key transparency. Therefore we can just remove it and get all of
the FBConfigs. Then if we need an ARGB visual we can just walk the
list to look for one with depth == 32.
The fbconfig is now stored in a single variable instead of having a
separate variable for the rgb and rgba configs because the old code
only ever retrieved one of them anyway.
Previously when the markup property is set it would generate an
attribute list from the markup and then merge it with the attributes
from the attribute property and store it as the effective
attributes. The markup attributes and the marked up text would then be
forgotten. This breaks if the application then later changes the
attributes property because it would try to regenerate the effective
attributes from the markup text but the stored text no longer contains
any markup. If the original markup text happened to contain entities
like '<' they would end up causing parse errors because they would
be converted to the actual symbols.
To fix this the attributes from the markup are now stored
independently from the effective attributes. The effective attributes
are now regenerated if either set of attributes changes right before a
layout is created.
http://bugzilla.openedhand.com/show_bug.cgi?id=1940
Destroy the dummy XImage we create even on success.
http://bugzilla.openedhand.com/show_bug.cgi?id=1918
Based on a patch by: Carlos Martín Nieto <carlos@cmartin.tk>
Signed-off-by: Emmanuele Bassi <ebassi@linux.intel.com>
