Dialog's subtitle or body could not be properly wrapped, while it's ellipsized
when the text's width doesn't exceed the container size.
Clutter text has an `ellipsize` property, however in dialog's subtitle and body
we have been setting the `ellipsize-mode` property to Pango.EllipsizeMode.NONE
that is not present in the underlying GObject.
Not being an error in javascript, gjs didn't warn us about this, while at the
same time the St.Label's default Pango.EllipsizeMode.END was used.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/922https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/531
If an actor's allocation is outdated, clutter_actor_get_allocation_box()
will queue a relayout. That's why it's advised to not use the function
unless the allocation is known to be valid (namely during paint), but
in particular not from within get_preferred_width/height vfuncs.
Using the :allocation property (which may be outdated) would be better,
but in this case we can simply delegate the request to the correct actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1065
We were cleaning up self._groups, but the actors for all previous
groups/layers/modes would remain attached to the aspect container,
simply hidden.
Under some circumstances this can really make the amount of actors
in the shell stage to quickly ramp up, it's not just a "leak" but
also has potential side effects on performance.
We should destroy all child actors of this._aspectContainer, except
the static ones (emoji and keypad).
While at it, fix this._groups re-initialization, as it's actually an
object, not an array.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/523
Closes?: https://gitlab.gnome.org/GNOME/mutter/issues/556
We currently assume that every location has an associated timezone.
While this is sound in the real world, in practise it depends on
whether or not libgweather can find a corresponding timezone DB
entry.
This used to be a fringe case, but has become more likely when commit
https://gitlab.gnome.org/GNOME/libgweather/commit/d7682676ac9 moved
weather stations from cities to countries - the station itself is un-
likely to have a timezone entry, and the country may be part of more
than a single timezone.
It would be good for libgweather to return a timezone for those
locations again, but we should defend against the case anyway.
We cannot tell what time it is at a particular location without
knowing the timezone, so simply filter them out.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1062
The top bar handles allocating all its children itself, so there's
little value in chaining up to st_widget_allocate() and get the
default layout manager allocating all children again (and possibly
differently).
If this happens, we end up with an infinite allocation cycle with
corresponding performance penalty. Fix this by just doing and what
Shell.GenericContainer did before commit 286ffbe2b6 replaced it,
and not chain up to StWidget.
Thanks to Robert Mader for debugging the issue.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1054
On one hand, we were using a path instead of an URI on
rsvg_handle_set_base_uri(). This broke at some point in librsvg
(presumably for the best, handling paths there sounds non-standard)
leaving a blank svg (As the base image wouldn't be accessed).
On the other hand, we use this with the deprecated rsvg_handle_write()
which we should drift away from.
Using rsvg_handle_new_from_stream_sync() neatly solves both. We use
newer API based on input streams and GFiles, and it internally does
the right thing, bringing the pad OSD back to life.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1220
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Classes that are sub-classes of GObject don't use a constructor per se, so we
can't check for new.target (as this is undefined) in _init.
Then compare the current constructor name instead.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/503
Unlike regular keys that generate key events from a virtual device,
emoji keys rely on the input method to insert the character. However
as the compositor cannot inject IM events into ibus, this only works
in the shell's own entries on X11.
We shouldn't expose mostly broken functionality to the user, so limit
the feature to the wayland session.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1172
Move the signal handlers for changed settings to be connected after the
creation of the menu items to make sure a reference to the item is set.
While it also worked fine before, this solution certainly looks cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/512
At the point it is disabled, it has got signal handlers connected but
this._workspacesView is uninitialized. This triggers:
(gnome-shell:3993): Gjs-WARNING **: 18:49:53.281: JS ERROR: Exception in callback for signal: cancel: TypeError: this._workspacesViews is undefined
_endTouchGesture@resource:///org/gnome/shell/ui/workspacesView.js:527:25
_emit@resource:///org/gnome/gjs/modules/signals.js:142:27
set enabled@resource:///org/gnome/shell/ui/windowManager.js:478:13
WorkspacesDisplay<@resource:///org/gnome/shell/ui/workspacesView.js:482:9
ViewSelector<@resource:///org/gnome/shell/ui/viewSelector.js:167:35
ControlsManager<@resource:///org/gnome/shell/ui/overviewControls.js:405:29
init@resource:///org/gnome/shell/ui/overview.js:234:26
_initializeUI@resource:///org/gnome/shell/ui/main.js:184:5
start@resource:///org/gnome/shell/ui/main.js:124:5
@<main>:1:31
On startup. Shuffling these two lines prevent this from happening.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/506
The port away from the old Shell.GenericContainer actor turned many JS
classes with a corresponding actor property into Clutter.Actor subclasses.
For compatibility reasons, those properties were kept around for a while.
They were now removed and any code that still uses them should be adjusted.
Facilitate that transition by defining the compatibility property on
Clutter.Actor itself, but log a warning every time it is accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/487
It may not be immediately obvious that the windows section is a
list of open application windows, as titles like "Downloads" can
easily be confused with an action. Add a section heading to avoid
confusion.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/968
We currently copy the app icon menu behavior, which puts a separator
between windows from the current workspace and windows from any other
workspace. It is more useful to have the windows section appear as a
clearly marked group, so drop the separator.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/968
Work around a known regression from [1] that caused the volume bar in
the OSD window to never be hidden, even if the volume is set to 0. This
happened because the border radius of the barLevel is always drawn
without ensuring that the actual bar is visible.
So simply check if the value to draw is 0, and if it is, don't draw the
border radius of the bar at all. This will still result in incorrect
representation of values that have a width smaller than 2*border-radius,
but at least the bar looks right for a width of 0 now.
[1] https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/2https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/384
If a window gets destroyed right before it's resize
animation starts the user can get confronted with an undead
zombie clone that doesn't go away.
This commit makes sure said clones get reaped with their
actors.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1166
When determining the biggest icon size that fits the available height,
we first subtract the additional space requirements of icons (spacing,
padding, running indicator etc.) and then divide the result by the
number of icons to get the maximum size available to each icon texture.
In the above, the additional space requirement of each icon is taken
from the first icon (as all icons are assumed to be the same), and
calculated as the difference between the icon button's preferred height
and the currently used icon size.
To make sure that the icon is actually using the dash's current icon
size (even while animating to a new icon size), we enforce its height
during the size request and restore its original height afterwards.
However after some recent changes, that step is causing troubles:
For some reason, the original height may be 0, and when we restore it,
we end up forcing a fixed non-height that bypasses the regular size
request machinery.
While it is unclear where exactly the zero height comes from (maybe
waiting for a valid resource scale?), it is clear that it's best
to avoid forcing a fixed height. So instead of making the icon
texture comply with the assumed icon size, adjust the calculations
to use its current height request.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1053
We recently added offsets to world clocks that represent the location's
timezone as UTC offset. However for most users, that representation is
overly technical and less helpful than the difference to their local time.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1157
We currently use the city name for all location except named timezones.
However locations only have a city name if they are of level CITY or
DETACHED, or if they are of level WEATHER_STATION with a parent of level
CITY.
So when libgweather commit d7682676ac9 moved weather station locations from
cities to countries, it broke their names in the world clocks section.
To fix this, stop making assumptions about when we can use the city name
and simply try it first for all locations and fall back to the plain name
if its not available.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1150
After the Adwaita refresh, the button shows up oval rather than
circular. To address this, make sure that the "image-button" class
is applied as well by using the dedicated setter function.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/482
Compute the source actor workarea and allocation when repositioning and keep it
cached so that we've not to calculating it again in _calculateArrowSide.
Since _calculateArrowSide only is called inside _updateFlip that is always
called just after reposition, we can be sure that the computed values are still
correct.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/435
Currently all the widgets using BoxPointer and so popup actors are always drawn
at screen origin and then shifted at paint time in the proper position.
This doesn't work when using resource scale, since the widgets need to know
in which monitor they currently are in order to use properly scaled resources.
So, basically revert commit 22c22e0d7 and go back using the actual actor
coordinates for positioning and the actor translation for animating it, as the
relayouting issues of the past seem to be gone now.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1008https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/435
Inserting a workspace is implemented by appending a new workspace, then
shifting all windows after the "new" workspace up. This has an unintended
side effect on sticky windows, as changing its workspace will unstick it.
Fix this by excluding sticky windows - there's little point in moving them
anyway, given that they should be on all workspaces (including the original
workspace and the target one).
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1151
The monitor index is not something that gnome-shell and
gnome-settings-daemon seem to be agreeing about. Using the connector
string is a much more reliable method of identifying a specific screen
and we are indeed using this already for monitor labling.
So switch over to use the connector rather than the monitor index. If a
user tries to use the old API, then the OSD will simply show up on all
monitors (which is the status quo currently anyway).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/489
This API has been broken for quite some time now as the corresponding
mutter function meta_monitor_manager_get_monitor_for_output was removed.
If anyone tries to use it, we would just run into a backtrace.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/490
Selecting a screen area for a screenshot isn't the same as selecting
items in an icon view, so there's no strong rationale for picking
up the style from GTK. We stopped doing that for other elements like
tile previews long ago, so just use our own style here too.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/481
Now that the existing touch/touchpad gestures in windowManager only
handle normal mode, add corresponding gestures for the overview and
hook them up to the existing workspace scroll animations.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
The window group is hidden while in overview, so the stick-to-content
animation isn't visible either. Worse, the gestures messes up the
position of window actors in that case. Just limit the gesture to
normal mode for now, we will soon add it back in the overview with
its own animation handling.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
The touch/touchpad gestures to switch workspace currently hard-code
the modes in which we want the gestures to work. While these modes
are correct, the existing switch animation only works in NORMAL mode,
not in the overview where the window group is hidden. The easiest way
to address this is to handle both cases completely separately, namely
use separate actions in- and outside the overview.
Make the existing usable in that way by making the list of allowed
modes a constructor parameter.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
Our weather integration is supposed to follow GNOME Weather's settings,
including its permission to use location services. However there's a
discrepancy in case xdg-desktop-portal is unavailable:
While our geoclue agent grants all applications access to location
services in that case, the weather integration treats it as if
access was denied.
Fix this by handling this case explicitly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1130
The same code for reading the current magnifier state is repeated in both
shell-recorder, shell-screenshot and magnifier itself.
So to move this inside a property of st-settings so that we can refer to it
all over the places removing duplications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/473
There's no point in keeping the cursor sprite texture around all the time,
and to listen for its changes, we just need this when the magnifier is active.
So, initialize the magnifier texture and monitor for the sprite changes on
activation, while disconnect from the signal and nullify the texture when
the magnifier is deactivated.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/443
In order to paint all the color channels of the content texture we need to
set the color channels to 255, so instead of doing this manually we can just
reuse the static color definition for white.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1020
ClutterContent's get_preferred_size should return a boolean weather the
preferred size is valid, so in javascript we've to return this state value
before out width and height.
Since this was not happening, clutter was considering the width as the state
(converting the non-zero value to true), the height as the width, while ignoring
the returned height (that was then defaulted to 0)
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1020
The default ZoomRegion is created at startup and only updated if it is active
when the monitor setup changes. Thus when reactivating the magnifier after a
display change, the viewport used is still the one that been computed with the
old screen geometry values.
Move screen update code inside a function and call it both when activating
the zoom region and when the monitor changes during a zoom session.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1120
NetworkManager added support for a new device - NMDeviceWifiP2P - but
did not add the corresponding enum value in NMDeviceType. The return
value for nm_device_get_device_type() is therefore "illegal" for the
newly added device, and gjs throws an exception.
This should ultimately be fixed in libnm, but as errors when adding
one device shouldn't interfere with adding any other devices, catching
exception is a good idea anyway, so do just that.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1023
The current scripting module makes heavy use of pre-standardized
iterator/generator/promise APIs, at least for some of those support
was pulled in SpiderMonkey 58.
Port to the new standardized replacements to get the module back into
a working state.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/440
Commit 1b169655ac removed the system indicator from the list of children
that are considered for the overall menu width, because we do want the
log-out submenu to adapt to the available width.
However as a side effect, action buttons no longer contribute to the
width either, so if extensions add additional buttons, the menu is
likely to overflow.
Avoid this by only adding the button group to the list of size children.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1094
This call just went through stomping over previous drag operations if any,
_maybeStartDrag() accounted for this, but other callers (well, WindowClone
in workspace.js) don't. This must bail out early even if a drag operation is
requested, luckily all callers account for it already.
This broke shell state by preserving connected captured-event handlers if
one tried to drag multiple windows simultaneously through multitouch. We
of course don't support that, now more elegantly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/455
The bind constraint that replaced the Shell.GenericContainer in commit
f4682748fa is subtly different from the previous code:
It forces the actor to have the same size as the stage, rather than just
requesting that size.
This breaks the magnifier which relies on the UI being able to be bigger
than the display size. Fix by going back to using a custom actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/646
The texture cache now returns an actor with an appropriate ClutterContent
rather than a ClutterTexture. That actor uses the CONTENT_SIZE request
mode, which means that it will unconditionally request the preferred size
of the content. That is, setting an explicit size no longer has an effect.
Fix this by making sure the image is already loaded with the desired
dimensions.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1024
It is convenient for the OSK so it eg. doesn't appear centered in the
available space (eg. on very narrow portrait layouts), plus it will also
be convenient to align other AspectContainers to the same baseline.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/439
While it is possible to register accelerators in-bulk, there is no
proper way to unregister them again. This adds the corresponding call
for UngrabAccelerator to allow ungrabbing multiple accelerators at the
same time.
The idea is that g-s-d can use this in the future to simplify the
keybinding reload logic.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/429
Commit 8f15193b4 changed the `policy` property from a regular JS property to
a getter. This was necessary to avoid calling an overridden _createPolicy()
method before a subclass is properly initialized, but it broke the second
way of using notification sources:
Don't create a Source subclass, but use the base class directly and change
its `policy` property.
There's no good reason why we should no longer allow this, so add a setter.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/431
The dialog doesn't change the `destroyOnClose` property from its default,
so it is already destroyed automatically on close. So if we also destroy
it explicitly, we end up (rightfully) with one of gjs' infamous "invalid
access" warnings.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/430
Instead of just passing a scale when getting a cached icon, pass both a
'paint_scale', the scale of which the icon will be painted on the
stage, and a 'resource_scale', the scale of the resource used for
painting.
In effect, the texture size will use the scale 'paint_scale * resource_scale'
in a ceiled value while the size of the actor will use 'paint_scale' when
determining the size.
this would load a bigger texture, but the downscaling would keep the visual
quality.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/5https://bugzilla.gnome.org/show_bug.cgi?id=765011
Ouch, this went unnoticed for a long time: As the minimum size of menu
items is generally small (because its label can be ellipsized), we are
requesting the unellipsized width of the last "size child" instead of
the widest one.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/996
Here's a template string with '/' that escaped commit 94423151b2,
resulting in an xgettext warning when generating the .pot file.
Simply move it into the resource like the other interface descriptions
to make xgettext happy again.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/407
The top drag gesture is not of any use if the topmost window is not
a fullscreen window and will only block events near the important top
screen edge (i.e. the panel). To fix this, only enable this gesture if
the focus window is a fullscreen window.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/552
If the user's real name is too long to fit the menu comfortably, we are
supposed to use the username instead. However since commit f8e5e3e435,
we no longer set a max-width on the menu as a whole, but instead base
the width request on only "unellipsizable" children. For some reason
the system menu ended up there, so the name is now allowed to grow
indefinitely.
Remove it from the list of size children to get the intended behavior
back.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/400
The menu grabs the key focus when opened, which takes focus away from
whichever actor triggered the keyboard. And as the menu doesn't have
any text entries, the keyboard is popped down as a result.
Prevent this by making the menu items unfocusable, so the keyboard
focus just stays where it is. Considering that the menu is part
of the on-screen keyboard itself, not being keyboard-navigatable
isn't a big deal here.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/171
Menu items use a single 'active' state that follows both hover and
keyboard focus. It therefore makes sense for the active item to always
grab the focus, in particular as an item that is sensitive but not
focusable by keynav would be rather weird.
As it turns out, we do have a case that is weird enough where we want
exactly that, so only grab focus if the actor's :can-focus property
allows it.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/171
Those functions originated in gnome-shell-extension's Convenience
module which is copied by almost every extension out there. Let's
make people's life just a little bit easier by including the code
ourselves.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/150
Window titles aren't restricted in length, so the menu may end up unwieldily
width. Commit 0bec76b6ee therefore limited the app context menus, but that
got accidentally dropped in commit 0ded0dbfd5. Add back the limitation and
extend it to the new app menu as well.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Top bar icons are supposed to by symbolic, but not all applications
provide a symbolic icon. Make the stick out less by desaturating
the appmenu icon if a symbolic style is requested.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
With the app menu being phased out entirely, there's no good reason to
keep support for the fallback app menu in decorations either - the number
of applications that set an app menu and haven't embraced client-side
decorations is extremely small, and they should already have alternative
fallbacks for non-GNOME environment in place.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Since the plans to retire the app menu were announced, nobody objected to
the removal of the menu content, however some concerns were raised about
the menu's secondary role as indicator.
Account for that by not removing the existing app menu, but replacing it
with a built-in menu similar to the existing app icon context menu.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/624
The GtkSettings was originally introduced to inform applications about
the desktop shell's capabilities, but users soon started to use it to
force GTK+ to show the app menu inside the application. We eventually
caved and also handled the setting ourselves to hide the in-shell app
menu to allow users to "move" it.
But now the remote app menu is in the process of being retired[0], and
will be replaced with a simple indicator that cannot be moved, so
stop following the GtkSetting.
[0] https://gitlab.gnome.org/GNOME/Initiatives/wikis/App-Menu-Retirementhttps://gitlab.gnome.org/GNOME/gnome-shell/issues/624
Certain keybindings should continue to work even when a popup
menu is on screen. For instance, the keybinding for showing
the app menu and the keyinding for showing the calendar are
examples.
This is achieved by putting in place a special "POPUP" action
mode, whenever a popup menu is active. This mode replaces
the (e.g., "NORMAL" or "OVERVIEW") action mode that was in place
for as long as the popup menu is active.
But those keybindings should not work when the user is at the
unlock dialog (which uses an action mode of "UNLOCK").
Unfortunately, since commit c79d24b6 they do.
This commit addresses the problem by forcing the action mode
to NONE at the unlock screen when popups are visible.
CVE-2019-3820
Closes https://gitlab.gnome.org/GNOME/gnome-shell/issues/851
We shouldn't allow toggling menus that aren't supported by the
current session mode, but as indicators are hidden rather than
destroyed on mode switches, it is not enough to check for an
indicator's existence.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/851
This keyboard works similar to GTK+'s emoji chooser (actually, both pull
from the same JSON file). Emojis are categorized in sections and variants
and kept in a "model".
The EmojiPager actor then uses this model to generate pages on-the-fly as
the user swipes around. This is an important optimization since the amount
of actors would rival with the rest of the shell otherwise.
The EmojiSelection object puts the EmojiPager, the page indicators and
a KeyContainer with the bottom row of emoji section shortcuts together to
implement the emoji panel as a whole.
The Keyboard object hooked this to an "emoji" key, which is just visible
on the Clutter.InputContentPurpose where showing an emoji would be
meaningful. Otherwise the surrounding buttons are made a bit wider to
cover up for it (i.e. as it was before).
In order to cater for emoji panel usage, we want something like PageIndicators
except:
- It should have horizontal disposition
- It should not be animatable (?)
- It should not be reactive
Separated PageIndicators into a base, non-animated widget, and an
AnimatedPageIndicators that can be used on appDisplay.js. Reactiveness is
set through an extra method, and layout is set as a construct argument.
This will be useful as we want other panels (eg. emoji) to preserve aspect
ratio with the rest of the OSK. Separate the aspect ratio management logic
into this container that will be the parent of them all.
Since commit 447bf55e45 we turn the top bar translucent when
free-floating. While this looks fancy and reduces the appearance
of cutting into the available screen space, it has also had a
negative effect on legibility.
Nobody stepped up to address those issues in two years, so revert
back to the fully opaque top bar.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/408
While the current textual forecast is non-intrusive, it may be too
much so, making it less effective to spot the current conditions
at a glance.
Refresh the section to use a more conventional graphical representation,
similar to the one used by gnome-weather itself.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/262
Having Unity-like shortcuts for activating the first nine applications
in the dash has been a long requested feature, but somehow nobody got
around to implement it.
As the shortcut is most useful outside the overview where the dash is
not visible, only consider favorite apps as they have a predictable
order.
https://bugzilla.gnome.org/show_bug.cgi?id=648000
Since the overlays we show on hover above the window clones are no
longer only a close button, but the window title, a border and a close
button, rename a few variables so it's easier to understand what they're
for.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/346
Currently when a preference widget fails to load, we throw a raw
backtrace at the user. While that is undoubtedly useful information
for extension developers and bug reports, it is gibberish to most
users and hardly the first thing they should be exposed to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/193
In order to replace GTK+'s GtkDirectionType. It's bit-compatible with it,
too. All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
In order to replace GTK+'s GtkPolicyType. It's bit-compatible with it, too.
All callers have been updated to use it.
This is a purely accessory change in terms of X11 Display usage cleanup,
but helps see better what is left.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
This is actually papering over bugs in toolkits. On X11 the Xserver will
send crossing events when the stage input shape changes. As those go
end up ignored in GTK+, this warp call aims (and randomly manages) to send
a motion event that wouldn't go unlistened by the drag source window (the
one holding the grab).
This bug actually manifests in other ways, eg. by changing the window
beneath the pointer with alt-tab while DnDing. This should be fixed
altogether in the client side.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
This gdk_display_sync() call was added in commit a40daa3c22 so the alt-f2
dialog is able to spawn commands that trigger grabs on startup (eg. xmag/
xkill).
This seems worthwhile to do only on the X11 backend, and handling it in
mutter backend code seems cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/317
Allow notifications to set a x-gnome-privacy-scope hint, with values in
['system', 'user']. If all the notifications in a particular source hint
that their privacy scope is ‘system’, don’t hide the notification
details on the lock screen.
This is aimed at fixing the particular case of power notifications: they
contain information which is not private to the user (it relates to the
system: battery state or AC state, which is obvious to anyone who can
see the machine), so hiding the details of a power management
notification when the screen is locked is pointless.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/issues/726
Most often it is a bug if the condition part of a for-loop contains the
assignment operator rather than the comparison one, so tools rightfully
emit a warning.
Clarify that the assignment is intentional in this case by adding
parentheses.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
Just like the "in" operator in the previous patch, "instanceof" has
a lower precedence than negation, resulting in the nonsense condition
of "true instanceof BaseIcon".
Add parentheses to get the intended behavior.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
The "in" operator has a lower precedence than negation, so we are
actually testing whether the favorites map contains "false".
Add parentheses to get the intended behavior.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/375
The Magnifier class uses a small subtree of actors to track the
current cursor's position and sprite. Specifically, it uses the
deprecated ClutterTexture to paint the cursor sprites.
Add a new, very simple ClutterContent implementation to track the
cursor sprite, and replace the ClutterTexture by a ClutterActor.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/371
The last patch in the series, this one adapts StShadowHelper
to received a CoglFramebuffer. This is where we first touch
JavaScript with Cogl types, and as such, it depends on the
latest Mutter. Earlier versions of Mutter didn't have its
Mutter-Clutter GIR to generate types for various Cogl types.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/283
With the recent port to JS6 classes, the trailing
comma after functions in the syntax of classes has
been removed.
However commit c2961f21 accidentally reintroduces
one trailing comma after a newly created function,
leading into g-s throwing an exception and not
starting anymore.
Therefore, remove this trailing comma to solve
this problem.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/366
Besides the device grab on the drag device, also set up a captured-event
handler to catch other devices (except the keyboard) while the DnD
operation is ongoing. This makes DnD operations exclusive to others.
Also, disallow it in less aggressive ways if maybeStartDrag() gets called
while there is a current draggable.
This might definitely be nicer (eg. having other grabbed devices emit
leave/end events), but can't be done without major surgery to Clutter.
In the case where the draggable has an actor of its own, state could be
left broken when dragging on a place that would not accept the DnD op.
After button release, drag state is set to "cancelled" and the animation
begins. After the animation is finished, the drag actor would be destroyed
before disconnecting from its destroy handler.
Within the destroy handler, the grab would be undone but drag state would
be left on "cancelled" state for subsequent operations. This results in
DnD oddities and stuck grabs.
In order to fix this, double check in the actor destroy handler that we
are actually dragging before setting the "cancelled" state.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/540
Instead of fetching the CLUTTER_POINTER_DEVICE device. It will
be wrong if drags get initiated from tablet pointers. This allows
for DnD operations to be started, moved, and more importantly
finished through tablet devices.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/540
Whenever the AllView needs (re)populating, we used to do one general
g_app_info_get_all() to get all GAppInfo, plus one per app folder in order
to check the ones that fall within that category. This calls results in a
fair amount of I/O blocking the main loop.
In order to ease this, keep the GAppInfo list around in AllView, and make
the AppFolders use it when figuring out the contained apps. Since reloading
the AllView results in AppFolders regenerated from scratch, the app info
list is ensured to be up-to-date for any later change within the AppFolder
(eg. through the GSettings key changing).
As the list was already filtered in the first place, we can also remove
the try{}catch() in AppFolder in order to discard desktop files with
invalid encoding.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/issues/832
When connecting to a Wi-Fi router that supports the WPS button method
(PBC, push button connection) the user can simply press the button on
the router. Show an explanation in the PSK prompt when this is
possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/329
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When using dynamic workspaces, it is possible to try to change to a
non-existent one if the user defines hotkeys for changing to desktop
1, 2, 3... This case is not detected, and gnome shell shows an error:
JS ERROR: TypeError: workspace is null
actionMoveWorkspace@resource:///org/gnome/shell/ui/windowManager.js:2130:13
wrapper@resource:///org/gnome/gjs/modules/_legacy.js:82:22
_showWorkspaceSwitcher@resource:///org/gnome/shell/ui/windowManager.js:2104:13
wrapper@resource:///org/gnome/gjs/modules/_legacy.js:82:22
This patch adds a check before trying to change the workspace, to avoid
switching to a non-existent one.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/365
When an InputSourceIndicator is destroyed, the InputSourceManager it was
connected to could (and probably will) outlive it (since the manager is
a singleton). If the InputSourceManager emits any subsequent signals,
the callbacks from the finalised InputSourceIndicator could be invoked,
and will reference finalised objects.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Otherwise the user object could outlive the dialogue, emit a subsequent
signal, and the callback from that signal could reference finalised
objects/widgets from the dialogue. The likely mechanism for the user
outliving the dialogue is caching of user objects within
libaccountsservice.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Rather than explicitly destroying the session after calling close(),
destroy it from the `closed` signal handler.
This also means we can make the method internal.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
In case there are any internal ways the dialogue can close itself
without calling its own close() method, it’s probably better to do all
our cleanup on a handler for the `closed` signal instead.
This should introduce no functional changes except ensuring the
polkitAgent cleanup is always done.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
Otherwise the session could outlive the dialogue, emit a subsequent
signal, and its callback would reference finalised objects/widgets from
the dialogue. The PolkitSession object is implemented by
libpolkit-gobject, so we have no guarantees about its reference counting
— the session object could keep itself alive in another thread, or be a
singleton. In all likelihood, the session hangs around for longer than
the dialogue due to differences in when the two objects are garbage
collected.
This can be triggered by running `pkexec true` from a gnome-terminal
window, then calling `pkill pkexec` from another terminal (on a
different VT or via SSH). This causes the dialogue to be cancelled by
polkitd.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
This avoids the following warning sometimes happening later:
JS WARNING: [resource:///org/gnome/shell/ui/search.js 701]: reference to undefined property "searchInProgress"
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/357
The built-in calendar isn't meant to replace a full-fledged calendar
app, which is why clearing event messages only hides the event in
gnome-shell rather than deleting the actual event. This has turned out
to not be overly useful and often confusing - it creates a discrepancy
with visible events in apps, isn't revertible in a non-obscure fashion
and non-obviously limited to the current date.
As we are considering moving events out of the message list and back to
the calendar, it looks like a good time to remove that ability and keep
notifications as the only removable messages.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/262
We currently deliberately avoid chaining up in derived policy
constructors to not override properties with their defaults.
That's a neat trick that will stop working when porting to ES6
classes, as chaining up is necessary to actually initialize the
object there (including "this").
Address this by turning all properties into (overridable) getters
that are backed by private properties by default.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/350
The _createPolicy() method of a subclass usually depends on some
constructor parameters that need to be set before chaining up to
the parent. This works fine with Lang.Class, but will break with
ES6 classes, as "this" is only initialized after chaining up.
Prepare for this by not creating the policy in the constructor,
but when it is first accessed.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/350
Check via Polkit if the current user is actually allowed to enroll
devices before trying to do so. If not, show a notification that
explains that a system administrator needs to authorize the device.
Clicking on the notification will guide the user to the thunderbolt
control center panel. Before this patch, when the current user was
not allowed to enroll a device a polkit dialog would pop up which
is confusing because it did not contain any information why it was
shown. This patch implements the behavior as designed (see [1],
section "Multi-user environments").
[1] https://wiki.gnome.org/Design/Whiteboards/ThunderboltAccess
Since commit 5fb8d4f730, a NotificationMessage's notification property
is reset to null when the notification is destroyed. However at that
point we still have connected signal handlers around that we'll try
to disconnect later.
Avoid the warnings by disconnecting and resetting the handler IDs at
the same time as the notification.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/308
In contrast to generic animated icons, it is reasonable to expect
spinners to be invisible while inactive. Implement that behavior
in the new Spinner class and optionally animate the transitions.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/316
When `ibus restart` runs, InputMethod.enabled is changed to false
and no longer enable ibus but 'enabled' and 'disabled' signals
are not used in the current IBus clients and it's good to delete
the member simply.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/295
If the session mode doesn't allow access to Settings, the language
menu should respect that and not expose the "Region & Languages"
panel. Using the dedicated method instead of manually constructing
the menu item takes care of that and makes for less code.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/780
The picked target actor may be destroyed (e.g. hover style change
resulting in the ClutterTexture to be destroyed). If we don't handle
this, GJS will abort when it sees the exception caused by Javascript
code trying to access the destroyed target actor.
To handle it, listen on the 'destroy' signal on the target actor, and
repick, so a valid actor is passed to the next motion callback.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/632
When a fullscreen application is focused,
toggling the overview via hot-corner is disabled,
even when the overview is currently visible.
This only makes sense, when the overview is
hidden to not to disturb the behaviour of the
fullscreen application, but leaves an
inconsistency when the overview is visible since
it should work there like when a non-fullscreen-
application is focused.
So, always allow hiding the overview using the
hot corner when the overview is visible.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/429
The `GetWindows` method gives access to the list of windows for each
application with some of their properties, so utilities such as dogtail
can pick the window of their choice to interfere with using the provided
window id.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
Add a D-Bus API that allows the API user to introspect the application
state of the shell. Currently the only exposed information is list of
running applications and which one is active (i.e. has focus).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
The intention of commit 4dc20398 was to disable unredirection while
banners are shown, but the ::done-displaying signal currently used for
re-enabling unredirection is only emitted under some circumstances, so
it's possible that unredirection is left disabled indefinitely, whoops.
Fix this by tying disabling unredirection explicitly to the lifetime
of the banner actor.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/799
The only reason for `vfunc_paint` and `vfunc_pick` existing was to
implement a culling optimization. Although that optimization actually
made performance worse than none at all because it forced the painting
and picking cycles to spend more time calling into JavaScript.
Turns out we don't have to choose between native code and culling though.
Just reimplement the culling using native ClutterActor functions and we
get the benefits of both.
Performance on an i7-7700:
Moving the cursor over the icon grid:
Before: 70% CPU, 5.5ms per frame
After : 60% CPU, 4.5ms per frame
Scrolling the icon grid:
Before: 60% CPU, 4.4ms per frame
After : 50% CPU, 3.3ms per frame
Helps with https://gitlab.gnome.org/GNOME/gnome-shell/issues/174
Destroy the DashItemContainer's child from the same handler as the tooltip. This
will prevent invalid reads when the item is destroyed while its quicklist is
still open.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/781
Since commit 551e827841, we don't always pass a callback parameter.
However passing it on as undefined to ibus doesn't work, as gjs doesn't
accept that as a valid callback value and throw an error. As a result,
we can end up with no layout selected in the keyboard menu and an "empty"
indicator. Fix this by explicitly passing null if no callback has been
provided.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/293
Back in the day, there was a proposed system of tracking apps in a
specific context.
The inspiration was that you may have used apps in multiple modes:
Firefox may have been used in both "Programmer Reference" and
"Kitten Videos" contexts. Early user response to the feedback wasn't
too positive - context switching is something that humans have trouble
doing implicitly, let alone explicitly. The old codebase still has a
few remnants of this around; let's finally put them to rest.
Note that we still write out a dummy context tag to the XML file - old
versions of the shell will flat out crash if you don't have one of those
in there, so just leave it in for compatibility sake.
https://bugzilla.gnome.org/show_bug.cgi?id=673767
The pending-charge state means AC power is on but the battery is not
being charged. This can happen because its charge is above a certain
threshold, to avoid short charging cycles and prolong the battery's
life, or because the PSU is not powerful enough to charge the batteries.
Instead of lying to the user about something being estimated, we should
simply tell the truth and set the label to "Not Charging".
Closes: #701.
When we started to only show a single caption at a time, we allowed
title captions to be wider than their corresponding window preview.
But while overlapping neighboring previews is fine, we shouldn't
allow the captions to leak outside the workspace area itself and
overlap unrelated elements like workspace switcher or dash.
This partly reverts commit b3b30f239d.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/214
Instead of defaulting to a natural scroll behavior,
have the workspace switch action use the natural-scroll setting
in org.gnome.peripherals.touchpad to determine the correct
direction of travel when swiping. 4 finger swipes will then
match the behavior of the rest of the UI.
Reference: https://gitlab.gnome.org/GNOME/gnome-shell/issues/516
While this sounds counter-intuitive, the image-path hint value might also
be used with URIs or icon names.
As per freedesktop standard:
The "app_icon" parameter and "image-path" hint should be either an URI
(file:// is the only URI schema supported right now) or a name in a
freedesktop.org-compliant icon theme (not a GTK+ stock ID).
Thus the image-path hint should also be parsed as it happens for the
app_icon.
Reuse same logic, by falling back on _iconForNotificationData with the
hint value.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/285
We have a callback that will call close() when the notification is
destroyed, and a callback that will call destroy() on the notification
when the message is closed.
Currently, if the notification is destroyed we'll execute our callback
that will call again destroy() on the notification. That's bad
practice in general, and it also has the side effect of resetting the
destroy reason.
This commit avoids re-destroying the notification by dropping the
notification reference on destroy.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/258
Differently from the fd.o notifications, Gtk notifications do not
have a mechanism to update themselves. Instead, when a new
notification is received for an ID already known to the notification
daemon, the old notification is dismissed and a replaced with a new
one.
Currently though, there is no way to distinguish a notification that
was dismissed because of an user interaction, or because it was
replaced. That is an useful piece of information, so add a new value
to the NotificationDestroyedReason enum to account for it.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/258
When gnome-shell receives the signal of 'set-content-type' from ibus,
gnome-shell calls KeyboardManager.holdKeyboard() and
KeyboardManager.releaseKeyboard() and the functions change the current
input focus in GNOME Xorg and it could result in closing a popup window
which has a password entry by focusing on the entry.
The solution is to stop to call the APIs on 'set-content-type' signal.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/391
We don't usually show notification banners while the monitor is in
fullscreen, but when we do - the notification is urgent - we should
actually show the banner, even if the top-most window is unredirected.
To achieve that, disable unredirection while the banner is showing.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/430
The `reactive` property of icon actors was being restored multiple times
over the course of the pulse animation, all at slightly different times
as each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a pulse animation, limiting its smoothness and performance.
The solution is to not toggle the `reactive` property in the pulse
animation at all, which avoids incurring multiple full stage relayouts.
As a bonus, this means the icon under the cursor pulses with the correct
selection highlight, appearing more seamless and responsive.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/261
The `reactive` property of icon actors was being restored 24 times over
the course of the spring animation, all at slightly different times as
each icon finished animating at different times.
The problem is that toggling `reactive` on an `StWidget` incurs a style
change of the `insensitive` pseudo class, and style changes would quickly
queue relayouts incurring full stage reallocation. This occurred many times
during a spring animation hogging the CPU and limiting the frame rate.
The solution is defer and batch the cleanup for all icons until after the
last icon has finished animating. This way the CPU impact of the style
change and stage relayout isn't felt during the animation so the frame
rate remains higher and smoother. The overall CPU usage of the animation
is also reduced as the remaining relayouts are much more likely to be
grouped into a single frame.
Icon spring animation performance on an i7-7700:
Before: 83% CPU and 47 FPS
After : 78% CPU and 54 FPS
which is about a 22% increase in performance per clock (FPS/CPU).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/253
The switcher popup is a large, mostly transparent actor that
should cover all the clickable area of GNOME Shell. In Clutter
terms, it should cover the whole stage.
By binding it to the primary monitor, the Alt+Tab behavior
becomes a bit inconsistent. For example, by not hiding when
clicking at empty spaces at other monitors.
Fix that by binding the SwitcherPopup to the whole stage,
and not only the primary monitor.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/647
If no password or a wrong password is entered after automounting an
encrypted device, then the password should be reasked. However, this
does not happen because the relevant udisks error messages for this
cases are missing in the exception handler that calls _reaskPassword.
Fix this issue by adding the relevant udisks error strings to the
exception handling in the _onVolumeMounted method.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/640
