Added an example showing scaling of an actor on
each of the scaling gravity settings (NORTH_WEST, NORTH etc.),
with a mark indicating the center being used.
Displays the transformed size and position, updated
on each paint of the actor.
This add two new function that allows us to transform or project an
array of points instead of only transforming one point at a time. Recent
benchmarking has shown cogl_matrix_transform_point to be a bottleneck
sometimes, so this should allow us to reduce the overhead when
transforming lots of vertices at the same time, and also reduce the cost
of 3 component, non-projective transforms.
For now they are marked as experimental (you have to define
COGL_ENABLE_EXPERIMENTAL_API) because there is some concern that it
introduces some inconsistent naming. cogl_matrix_transform_point would
have to be renamed cogl_matrix_project_point to be consistent, but that
would be an API break.
Building the API reference for Cogl 2.0 is fairly confusing: the API
itself is experimental and for internal use only -- though we want
feedback for it.
Let's build the API reference only when Clutter is configured with a
specific configure switch, so that people that wish to give feedback on
the API and its documentation can do it.
* elliot/cookbook-animations-looping:
cookbook: Recipe for "looping animations"
cookbook: Clarify how signals are emitted during looped animation
cookbook: First draft for looping animations recipe
cookbook: Recipe skeleton for "looping animations"
cookbook: Looping animation examples
Added a recipe giving examples of how to loop
animations for each part of the animation API (implicit,
animator, state).
The discussion covers looping a fixed number of times
and inverting a single implicit animation to create
a loop which goes back to its start on each iteration.
So we can keep track of the experimental progress of Cogl 2.0 features
this adds a standalone Cogl 2.0 Reference Manual which doesn't cover
the deprecated 1.x symbols and removes the need for a "Cogl
experimental API" chapter since those sections now make up the main
table of contents.
Since EGA colors are apparently all the rage in other toolkits, Clutter
should not be left out. On top of the usual CGA/EGA palette the static
colors also include the Tango Icon palette, which at least is more
pleasant to the eye.
Static colors are accessed through an enumeration by using
clutter_color_get_static(), or using the short-hand pre-processor
macros.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2066
This exposes the idea of a stack of source materials instead of just
having a single current material. This allows the writing of orthogonal
code that can change the current source material and restore it to its
previous state. It also allows the implementation of new composite
primitives that may want to validate the current source material and
possibly make override changes in a derived material.
* wip/path-constraint:
docs: Add PathConstraint
tests: Add a PathConstraint interactive test
Add ClutterPathConstraint
actor-box: Add setters for origin and size
This function handles a single windows message. The idea is that it
could be used by clutter-gtk to forward on events from a
GdkEventFilter. The function replaces the old message_translate()
function. That function didn't translate the event anymore anyway and
instead it could generate multiple events so
clutter_win32_handle_event seems like a more appropriate name. The
function returns TRUE or FALSE depending on whether the event was
completely handled instead of setting call_window_proc.
The interpolate() method does what it says on the tin: it interpolates
between two colors using the given factor.
ClutterColor uses it to register a progress function for Intervals.
Recipe covers adding handlers for button-press-event and
button-release-event signals on actors, and how to
examine the content of a ClutterButtonEvent via API functions.
The discussion section explains about click count
(the criteria for how clicks get counted, including
distance and time settings); how button numbers are reported;
and how to use ClutterClickAction as an alternative
for press + release in certain scenarios.
The internal copy of JSON-GLib was meant to go away right after the 1.0
release, given that JSON-GLib was still young and relatively unknown.
Nowadays, many projects started depending on this little library, and
distributions ship it and keep it up to date.
Keeping a copy of JSON-GLib means keeping it up to date; unfortunately,
this would also imply updating the code not just for the API but for the
internal implementations.
Starting with the 1.2 release, Clutter preferably dependend on the
system copy; with the 1.4 release we stopped falling back automatically.
The 1.6 cycle finally removes the internal copy and requires a copy of
JSON-GLib installed on the target system in order to compile Clutter.
This recipe explains how to use the three animation
approaches (implicit, State, Animator) to animate movement
of actors.
Includes some guidelines about which approach to use when, with
a full code example for each approach.
The discussion section covers some subtleties around animated
movement; namely: moving actors out of their containers; anchor
points and movement; moving in the depth axis; interactions
between animated movement and constraints.
Added an example showing how to move two actors between
two states (one minimised, one maximised) using ClutterState
to do the movement. Also shows how movement can be mixed
with other animation (in this case, scaling).
This adds a "Cogl deprecated API" chapter to the Cogl reference manual
so we can group all the documentation for deprecated symbols together
instead of having them clutter up the documentation of symbols we would
rather developers used.
The CoglTexture3D API is only available when defining
COGL_ENABLE_EXPERIMENTAL_API so it should be listed in the experimental
section of the API reference.
* cookbook-layouts-bind-constraint:
cookbook: Add recipe about sync'ing actor sizes
cookbook: Example using allocation-changed to sync actor size
cookbook: Simple example to demonstrate bind constraint
cookbook: Example of using a bind constraint for an overlay
The recipe covers how to use ClutterBindConstraint
to bind actor sizes together.
It gives some examples of where this approach is appropriate,
as well as explaining an alternative using allocation-changed
or notify::* signals.
Three examples are given:
1. Resizing a texture to the stage.
2. Resizing a rectangle to act as a transparent overlay on
top of a texture (using constraints).
3. Resizing a rectangle to act as a transparent overlay on
top of a texture, but with a size proportional to the texture
(using a handler connected to allocation-changed signals
emitted by the texture).
An alternative method (not using constraints) to bind
one actor's size and position to another. Used as
an example in the recipe about resizing one actor in
sync with a source actor.
A simple example showing how to scale an actor to the stage.
Demonstrates ClutterBindConstraint and ClutterAlignConstraint
in a fashion suitable for a short recipe.
Example code which loads an image into a texture, and resizes
the image in response to +/- key presses. The overlay is
a transparent rectangle which is bound to the height and
width of the texture; on clicking the texture, the overlay
is made visible by increasing its opacity.
This demonstrates how to use constraints to simplify code
for resizing an actor which is "dependent" on another actor.
When building actor relative transforms, instead of using the matrix
stack to combine transformations and making assumptions about what is
currently on the stack we now just explicitly initialize an identity
matrix and apply transforms to that.
This removes the full_vertex_t typedef for internal transformation code
and we just use ClutterVertex.
ClutterStage now implements apply_transform like any other actor now
and the code we had in _cogl_setup_viewport has been moved to the
stage's apply_transform instead.
ClutterStage now tracks an explicit projection matrix and viewport
geometry. The projection matrix is derived from the perspective whenever
that changes, and the viewport is updated when the stage gets a new
allocation. The SYNC_MATRICES mechanism has been removed in favour of
_clutter_stage_dirty_viewport/projection() APIs that get used when
switching between multiple stages to ensure cogl has the latest
information about the onscreen framebuffer.
This recipe explains how to "reuse" the same animation
definition for different actors, by creating a new
instance of a "rig" (empty container) and animation
for the rig each time the animation is required.
An actor is then re-parented to the rig and animated
using it, rather than being animated directly.
JSON is used to define the rig + animator, to make
creating new instances of them simpler. The recipe
also discusses various caveats around using this
approach, rather than directly animating an actor.
Modified the "animation reuse" sample code to provide
a simpler example to explain in the recipe.
Also modified variable names to mirror the names used
for the previous "complex animation" example and added
some more comments, to further simplify and support the
recipe.
With some help from pippin, moved variable declarations
into more sensible positions within their functions,
changed a function name, and found a better way
to unref a script once its associated actor has
been destroyed.
Extracted the animation into its own JSON definition,
then create a new script and get the animation each
time a rectangle is clicked.
Removes the need to reparent onto the background and
copy property values to the rectangle after the animation,
and generally much cleaner.
Added an example showing how to reuse a ClutterAnimator
instance to animate multiple actors at different times
using an animatable rig, combined with reparenting.
The keysyms defines in clutter-keysyms.h are generated from the X11 key
symbols headers by doing the equivalent of a pass of sed from XK_* to
CLUTTER_*. This might lead to namespace collisions, down the road.
Instead, we should use the CLUTTER_KEY_* namespace.
This commit includes the script, taken from GDK, that parses the X11
key symbols and generates two headers:
- clutter-keysyms.h: the default included header, with CLUTTER_KEY_*
- clutter-keysyms-compat.h: the compatibility header, with CLUTTER_*
The compat.h header file is included if CLUTTER_DISABLE_DEPRECATED is
not defined - essentially deprecating all the old key symbols.
This does not change any ABI and, assuming that an application or
library is not compiling with CLUTTER_DISABLE_DEPRECATED, the source
compatibility is still guaranteed.
When animating an actor through clutter_actor_animate() and friends we
might want forcibly detach the animation instance from the actor in
order to start a new one - for instance, in response to user
interaction.
Currently, there is no way to do that except in a very convoluted way,
by emitting the ::completed signal and adding a special case in the
signal handlers; this is due to the fact that clutter_actor_animate()
adds more logic than the one added by clutter_animation_set_object(),
so calling set_object(NULL) or unreferencing the animation instance
itself won't be enough.
The right way to approach this is to add a new method to Clutter.Actor
that detaches any eventual Animation currently referencing it.
http://bugzilla.clutter-project.org/show_bug.cgi?id=2051
Uses ClutterAnimator to implement a reasonably complex
animation of a single actor (movement along a path with
simultaneous scaling).
Provides a metaphor for thinking about ClutterAnimator
animations (stage directions) and explains keys and key
frames in some depth. Also compares ClutterAnimator
with other possible approaches to this type of animation
(implicit animations, ClutterState).
Added another JSON example to show how transitions can
be easily overlapped when using ClutterAnimator (two
sequences of 5 transitions, simultaneous with two
sequences of 1 transition).
Modified the C JSON loader program so it can be used with
this example as well.
Intel CE3100 and CE4100 have several planes (framebuffers) and a
hardware blender to blend the planes togeteher to produce the final
image.
clutter_cex100_set_plane() lets you configure which framebuffer clutter
will use for its rendering.
*** This is an API change ***
The create_target() virtual function should return a CoglHandle to a
texture; clutter_offscreen_effect_get_target(), instead, returns a
CoglMaterial to be painted in the implementation of the paint_target()
virtual function.
Instead of equating textures with materials, and confusing the user of
the API, we should mark the difference more prominently.
First of all, we should return a CoglMaterial* (now that we have that
as a public type) in get_target(); having handles all over the place
does not make it easier to distinguish the semantics of the virtual
functions.
Then we should rename create_target() to create_texture(), to make it
clear that what should be returned is a texture that is used as the
backing for the offscreen framebuffer.
Added a recipe explaining how to connect signals to handlers
in the JSON definition used by ClutterScript; also shows
how to connect the signals in code once the JSON has been
loaded.
Includes guidelines on writing handlers (i.e. need to use
-export-dynamic and non-static functions) and example
which connects a handler for motion events on a rectangle.
GEnum nicknames can be used to set properties in JSON
definitions, so added a callout to the JSON example explaining
this, and showing how to derive the nickname for an enumeration
value.
Modified the example code to use nicknames as well.
As JSON can make use of nicknames for GEnum properties,
mentioned this in the table mapping C property values
to their JSON equivalents (as the nick name is a much
shorter and cleaner way of setting a property in JSON).
Wrote an introduction to using ClutterScript with JSON. Focus
is on explaining why you might want to use it, basic principles
of operation (with annotated JSON sample), and how to map
data types from C to JSON.
Written simultaneously with a short recipe (uses the same sample
code) showing how to load a JSON file and retrieve objects
from it in code.
Commented the ClutterScript example so it can be used
inline as part of the recipe, rather than as an
example in the appendix (it's too simple to warrant
a separate appendix).
