Fix a silly copy-paste mistake. Since `GObject` is the parent class,
chaining up to `dispose()` from within your `finalize()`
implementation just leads to a little memory leak and nothing worse.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2799>
Clutter has an API to get the text direction but used to depend
on gtk3's translation domain. In order to avoid broken i18n
in case gtk3 is not installed, move the transtalable string to
clutter itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2407>
Now that dynamic max render time uses a new algorithm and takes dispatch
lateness into account, this seems worth a shot. We'll see how it works
out in the wild.
The net result compared to before these changes is still slightly higher
(by ~0.5 ms) minimum latency for me, as measured by
weston-presentation-shm. It should be less vulnerable to frame drops
though.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2500>
Store only two values per kind of duration: The short term and long term
maximum.
The short term maximum is updated in each frame clock dispatch. The long
term maximum is updated at most once per second: If the short term
maximum is higher, the long term maximum is updated to match it.
Otherwise, a fraction of the delta between the two maxima is subtracted
from the long term maximum.
Compared to the previous algorithm:
* The calculcations are simpler.
* The calculated max render time has a slow exponential drop-off (by at
most a few milliseconds every second) instead of potentially abruptly
dropping after as few as 16 frames.
This should fix https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4830
since the short term maximum should always include a sample from the
clock's second tick.
v2:
* Use divisor 2 instead of 4.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2500>
Dispatch lateness is the difference between when we wanted frame clock
dispatch to run and when it actually started running. This can be up to
1ms even under normal circumstances due to process scheduling
granularity, or even higher under load.
This keeps track of dispatch lateness of the last 16 frame clock
dispatches, and incorporates the maximum into the dynamic render time
estimate.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2500>
When we remove a child, we stop its transitions (animations), but we
didn't stop animations on grand children. What we did, however, was to
clear the stage views of the grand children, and this caused a bunch of
orphaned transitions (ClutterTimeline) and accompanied warnings.
Make it so that if we stop transitions, and clear stage views, also stop
transitions for the grand children. Detached children don't have a way
to continue animating anyway, since they have no stage view (thus frame
clock) to be driven by.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2716>
When a badly behaving ClutterActor implementation manages to invalidate
the allocation after the layout phase and before painting, we have no
idea where the actor should be painted without running the whole layout
machinery again.
For paint volumes in this case we pretend the actor covers the whole
stage and queue full-stage redraws. When updating stage-views, we're
also handling this case, but not in the most graceful way. Just like
with paint volumes, we should assume an actor without a valid allocation
is simply everywhere, so set priv->stage_views to all available stage
views in that case.
Related: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6054
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2694>
We've been sending all events to clients immediately for quite some time
now, so this is only really impacting the Clutter scene graph, not
clients anymore.
That makes this behavior a somewhat unnecessary optimization (it was
useful at the time it was added, but it's not anymore), which will only
make our lives harder when we actually expect an event to be queued
(eg. in tests), so remove it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2697>
As suggested by Carlos in a review of this MR, refactor the logic of
clutter_do_event() to have both adding and removing of devices from the
devices list in a single place.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2696>
Having the stage device list be responsible for delivering the
same events twice (first immediately to clients, then later to Clutter)
was expected to be tricky, a sneaky problem with it right now is the
following case:
While collecting events for a stage update cycle, we get three touch
events from the backend: TOUCH_BEGIN(seq=1) -> TOUCH_END(seq=1) ->
TOUCH_BEGIN(seq=1)
What we do right now when we see a TOUCH_BEGIN event is adding a device
to the stage right when it comes in from the backend. And when we see
a TOUCH_END, we remove the device from the stage not immediately but
only after it went through the queue.
In the case of the three events mentioned above, with the current
behavior, this will happen when they come in from the backend:
- TOUCH_BEGIN(seq=1): device gets added to the stage with seq 1, event
gets queued
- TOUCH_END(seq=1): Nothing happens, event gets queued
- TOUCH_BEGIN(seq=1): we try to add device to the stage, but seq 1 is
already there, event gets queued
Now when we go through the queue and see the TOUCH_END, the device with
seq 1 gets removed, but on the subsequent TOUCH_BEGIN, we won't add a
new device, so this event (and all events with seq=1 that are still in
the queue) is now ignored by Clutter because it has no device.
What we want to do here is to cut short once the TOUCH_END event comes
in: Process queued events immediately and make sure the device is
removed from the stage list before a new device can be added. Same goes
for any other events that will lead to devices getting removed.
Small note: Since this leads to clutter_stage_get_device_actor()
returning NULL, I was wondering why we never crash because of this:
Turns out _clutter_actor_handle_event() handles self = NULL just fine
without crashing...
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2696>
With commit 6c17aa66c6 we made sure no
stale device entries might land in the stage device list. The same can
happen for pointer devices too in theory, in practice we never really
filter them out, but it's good to handle them here anyway.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2696>
We'll call this function from a few more places for the
CLUTTER_DEVICE_REMOVED case, so move the check for which devices are
valid into the function itself to avoid having to check everywhere.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2696>
Updating of the paint volume used for culling these days happens
during the finish-layout stage, not while painting. Also we have
geometry-based, not paint-based picking anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
Rename the `last_paint_volume` to `visible_paint_volume`: That avoids
confusion with the `had_effects_on_last_paint_volume_update` flag and
also makes it clear that this paint volume is the currently visible one.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
Rename the paint_volume_valid flag to has_paint_volume in order to
better reflect what it's for.
The name "paint_volume_valid" implies that the paint volume can be
invalidated and thus sounds like it's involved with some kind of
caching. The flag that's actually involved with caching is
"needs_paint_volume_update", while "paint_volume_valid" is only meant to
store whether the actor has a paint volume to work with.
So rename paint_volume_valid to has_paint_volume to avoid confusion
about which flag is used for caching.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
For clarity and for further improvements, introduce a separate function
to update the paint volume instead of doing that inside
_clutter_actor_get_paint_volume_mutable().
Also add a FIXME comment for a possible bug I noticed while working on
it.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
Since ClutterActor now properly caches its paint volume and ClutterText
tries hard to invalidate its own cached paint volume on every redraw
anyway (that's more often than ClutterActor invalidates its own paint
volume), we can simply rely on the caching of the paint volume done by
ClutterActor and invalidate that on every redraw.
So remove the private cached paint volume from ClutterText and all its
invalidation machinery.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
The function _clutter_paint_volume_get_stage_paint_box() actually
doesn't modify the paint volume that's passed to it, so make that a bit
more clear by passing a const paint volume as the argument.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
These days it's possible to chain up into the default get_paint_volume()
implementation again, which renders
clutter_actor_get_default_paint_volume() unnecessary. So remove that
function and move clutter_actor_update_default_paint_volume() back into
real_get_paint_volume() where it belongs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1492>
We traverse the whole screnegraph anyway these days in finish_layout(),
so no need for the whole "set the flag on parents even though we don't
need it" dance anymore.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2667>
There do indeed seem to be places in our own code that trigger grabs on
actors before they are realized. It was not the intention to change the
practical preconditions for GNOME 43, so make it an even lower minimum
that every caller ought to match: That the actor is attached to the stage.
Further constraining of these preconditions will have to wait until
branching for new development.
Fixes: 9c79c7234 (clutter: Only allow grabs to be created on realized actors)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2670>
The bare minimum that we can ask to an actor before creating a grab
on it is that it is realized (and thus, attached to the stage). Bail
out if that is not the case when creating a grab.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2669>
If an actor is being unrealized or otherwise unparented, it's a good
indication that its grabs are now stale and possibly harmful. Ensure
these are dropped when the actor is unparented.
This is now an unlikely event, since there is code to also dismiss
grabs when a visible grabbed actor goes unmapped. But that may be
prevented from happening, or the ordering of circumstances allow a
grab to be created and an actor destroyed without going unmapped
first. This grab dismission on unmap stays as it matches the UI-level
expectatives that an actor must be visible to be grabbed.
Related: https://gitlab.gnome.org/GNOME/mutter/-/issues/2475
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2669>
The stage view list does not get updated when an actor gets hidden in
order to avoid unnecessary work, such as scale changes. However, we
still want `is_effectively_on_stage_view` to report `FALSE` in this
case.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2662>
The :input-purpose and :input-hints properties were added without
actually handling the get/set operations, whoops.
All code uses the (working) methods, so this only fixes expectations,
not an actual bug :-)
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2659>
If we have a window that match the size (i.e. will pass the "fits
framebuffer" low level check), that doesn't mean it matches the
position. For example, if we have two monitors 2K monitors, with two 2K
sized windows, one on monitor A, and one on monitor both monitor A and
B, overlapping both, if the latter window is above the former, it'll end
up bing scanned out on both if it ends up fitting all the other
requirements.
Fix this by checking that the paint box matches the stage view layout,
as that makes sure the actor we're painting isn't just partially on the
right view.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2387
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2624>
A few calculations and assignments are done unnecessarily when the
last next presentation time is invalid. This increases the cognitive
complexity of the function for no reason.
No change in behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2486>
I don't see how this makes sense at all, ClutterClickAction really
shouldn't mess with BUTTON_RELEASE events that are not part of a
gesture.
So propagate those events instead of stopping them.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2552>
The source field was removed from ClutterEvent with commit
b644ea1bce because the preferred way of
getting the event actor is now to use the device/sequence actor from the
stage directly.
With crossing events it's not that easy though, as crossing events
explicitly have a source and related actor that doesn't have to be the
same actor as the device actor. Since we kept around the "related" field
there anyway, let's also introduce a "source" field in
ClutterCrossingEvent and return that actor when get_source() is called
on a crossing event.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2551>
Just like we did with the ::captured-event signal, add detail to the
::event signal too. At the first glance this might not seem necessary
since there are individual signals like scroll-event or touch-event that
get emitted at the same time, but these don't exist for touchpad gesture
events and others.
As an easy solution for that, just make it possible to use detail on the
event signal as we did with the caputured-event signal.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2431>
In some hardware configurations, presentation timestamps could be
missing from some page flip events, leading to a temporary loss of
vblank synchronization.
This occurs at least with AMD GPUs for atomic commits that only update
the cursor plane. [0]
In those cases, it's better to calculate the next update time
according to the last valid presentation timestamp instead of relying
on the dispatch lateness.
[0] https://gitlab.freedesktop.org/drm/amd/-/issues/2030
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2481>
When taking the scanout path we still want to clear the
redraw-clip from the stage-view in order to ensure we skip
frames in `handle_frame_clock_frame()` if no new redraw-clip
was recorded.
This was not done previously as the accumulated redraw-clip was
needed for the next repaint, likely under the assumption that
scheduling a scanout repeatedly would be computationally cost-free.
This assumption does not hold in a VRR world.
In order to archive both, an accumulated redraw-clip for the next
paint and frame-skipping during scanout, introduce new API to defer
and accumulate redraw-clips until the next repaint.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2480>
Similar to the clutter commits
- Drop all the private structs documentations
- Make use of gi-docgen items linking as much as possible
- Use markdown formatting for code snippets
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2441>
This can happen with the native backend if the previous frame clock
dispatch didn't result in any KMS update, e.g. because it was triggered
by an input event, but the HW cursor didn't need updating on the stage
view. (This is likely to happen on some out of multiple stage views,
but might be possible even with a single stage view if the cursor isn't
visible)
We would previously delay next_presentation_time_us by one refresh
interval in this case, which could result in spuriously leaving one
refresh cycle unused.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2498>
Somewhat long overdue... We've been supporting more than a single
pointer for quite a long time now, let's make sure things don't break if
two pointer devices enter the same ClutterActor: Count the number of
pointers an actor has instead of using a simple boolean value.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2348>
In certain edge cases it's currently possible that an actor never
gets a valid allocation and paint volume.
One such case is adding an unmapped, hidden child to an unmapped
cloned parent and then showing the child. This happens currently
e.g. if a Wayland subsurface is added to a already mapped window
while the user is in the overview.
Ensure relayouts in two more such cases.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2530>
The notification list in the GNOME Shell calendar popup triggers some
interesting interactions when closing a notification:
- Close button is clicked
- The notification animates to be hidden
- The next notification ends up hovered as a result of the animation
- The notification being hovered sets its close button as non-transparent
and reactive
- The pointer is now again over a close button
At this point the reactiveness change should trigger a repick, so that
the new notification's close button is picked, and future button presses
are directed to it, but we do not handle this situation.
To fix this, handle actors becoming reactive so that if the closest
reactive parent has a pointer, it will be repicked again just in case
the pointer is over the newly reactive actor.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2364
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2532>
The function that currently invalidates pointers over an specific actor
also asserts for the situations where this invalidation makes sense to
happen (i.e. the actor became unmapped, or non-reactive).
We want to have a function that is more forgiving, and that doesn't
enforce any guarantees about the pointer focus actually changing.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2532>
`clutter_actor_iter_destroy` will try to match up the iterator's `age`
with that of the parent ("root") actor:
```
g_return_if_fail (ri->age == ri->root->priv->age);
```
In a simple actor graph that's completely reasonable but somewhere in the
more complex graph of gnome-shell the parent's `age` was skipping ahead
faster than that of the iterator. This could happen in theory if the
destroy indirectly leads to more children being destroyed than the
iterator has visited.
So there's no evidence of actual corruption, only the age check might
fail in a `clutter_actor_iter_destroy` loop because the age check itself
can't handle all possible valid scenarios.
Since our only mandate is to destroy all children, we can do that reliably
without an iterator and thus without assuming anything about the parent's
`age` counter.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4747
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2074>
ClutterColorState, that is a GObject. each ClutterActor would own
such an object, and it'd be set via a GObject property.
It would have an API to get the colorspace, whether the actor
content is in pq or not, and things like that.
if it is NULL, it will default to color state with sRGB colorspace.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2443>
There are no 'features' left, the last one, GLSL shader support, was
moved to Cogl.
This also move the Cogl context creation to a more sensible place, as it
was hidden away in the feature initialization.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2015>
The Cogl feature was removed a while back, while Clutter just hard coded
it to TRUE. Lets remove the confusion that GLSL isn't supported and just
remove the (dead) fallback paths.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2015>
Cleanup all the boilerplate, and port the function to use the auto
generated private helper. Remove the manual autocleanup declaration
since this is now done in the clutter-image.h header.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2355>
A slightly annoying "feature" of Clutters debug messages is that it also
logs the filename and line of the current debug message. If you don't
have an ultrawide monitor, this can be very annoying and cause lots of
linebreaks in the debug logs.
So remove that debugging feature and no longer log the filename and
line number with debugging messages.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2378>
This is a signal that will be emitted between the 'before-update' and
'before-paint'. It can be used to handle things when you know whether
there is an update, and you know whether a paint or not will happen, by
looking at the current damage.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2393>
Mutters event filter can prevent events from getting processed by
Clutter, this can also happen for TOUCH_END/CANCEL events. Processing
these events in Clutter is crucial for proper tracking of touch
sequences though, that's because Clutter adds a PointerDeviceEntry to
the stage on a TOUCH_BEGIN *before* going through the event filter, but
removes that entry on a TOUCH_END *after* going through the filter. So
Clutter really needs to see those TOUCH_END events, or else there will
be a stale PointerDeviceEntry on the ClutterStage.
Make sure those TOUCH_END/CANCEL events always get seen by Clutter by
removing the device entry immediately when those get filtered out.
Because there might still be events belonging to this sequence in the
event queue of the stage, we need to flush the queue before removing the
entry, too.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2350>
Unfortunately we cannot do this generically since the target of the
button/touch press does matter, e.g. tapping on the OSK, or clicking
the IBus candidates window. These situations should not trigger a
reset.
So be more selective about the situations where button/touch presses
trigger an IM reset, in the case of ClutterText these are still clicks
inside the actor, for Wayland's text-input it is when clicking the
surface that has text_input focus.
For all other situations where clicking anywhere else might make
sense to trigger an IM reset are covered by the focus changing paths,
that also ensure a reset before changing focus between surfaces/actors.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1961
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2384>
Focus changes should trigger an IM reset, as some engines do want
to maybe commit the preedit buffer before changing focus. Since
the preedit string is also cleared on reset(), we can do without
that explicit call.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2384>
Right now we have a bit of a mixed bag between an active model where
input foci set the surrounding text without being asked for (e.g.
wayland's text_input), and a passive model where the IM engines ask
for content.
Make ClutterText take the same side than text_input, so that dealing
with those is at least consistent.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2384>
The clutter_text_delete_text() function used underneath expects character
offsets for both start/end position. Fix the end position passed an offset
instead of that, and compesnate for the cursor position being always -1
when the caret is at the end of the string.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2384>
I've overseen quite an important case in commit
98a5cb37d9: Repicking only when actors get
destroyed is not enough, we actually need to repick when actors go
hidden/unmapped.
While we could also listen to notify::mapped just like we listen to
notify::reactive, it seems better to avoid using property notifications
here due to the usage of g_object_freeze/thaw_notify() in ClutterActor.
It can lead to the stage receiving a notify::mapped with mapped = true
for a pointer actor, which really shouldn't happen (just like
notify::reactive with reactive = true shouldn't happen).
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5124
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2333>
We want all pointer events to be passed through the pointer a11y
processing before going through event filters: Once we go through event
filters, events might be dispatched to Wayland and get filtered out.
With the changes to immediately dispatch events to wayland, this changed
and the pointer a11y is now no longer seeing any events going to wayland
clients. Fix it by shuffling things around a bit and letting pointer
a11y take a peek at events earlier.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/5192
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2332>
There's a bunch of crashes right now where the assertions in
clutter_actor_set_mapped() after calling the map/unmap() vfuncs are
failing. The only way this can happen is by re-entering
clutter_actor_set_mapped() during the map/unmap recursion.
The reason for those crashes is that the shell hides/shows some actors
in response to crossing events and key-focus changes. These in turn get
triggered by the newly introduced ungrabbing of ClutterGrabs when an
actor gets unmapped, which triggers GRAB_NOTIFY crossing events and
key-focus changes.
Since these situations are hardly avoidable (it's a valid use-case to
hide/show something in response to a crossing/key-focus event), catch
the set_mapped() call early while we reenter the mapping machinery and
log a warning instead of crashing.
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3165
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2299>
With the introduction of untrottled event delivery to wayland clients,
we moved the _clutter_event_process_filters() call outside of
_clutter_process_event(). This also moved the processing of event
filters outside of the timespan where the event is added to Clutters
current_event stack, making Clutter.get_current_event() no longer
available to anything happening inside mutters event filter.
One thing that happens in mutters event filter is detecting and
triggering keybindings like the alt-tab switcher. Now the alt-tab
switcher has a special case where it finishes and activates a window
right when the keybinding gets activated, relying on the current event
time as the timestamp to activate the window.
Now since the current event time is no longer available from inside
mutters event filter, we'd pass 0 to meta_window_activate(), causing
mutter to send a notification instead of actually activating the window.
To fix this, also set a current_event for the ClutterContext when going
through event filters, this makes sure Clutter.get_current_event_time()
works when called inside keybinding handlers.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2327>
In the right combination of circumstances, and given 2 actors (parent
actor P with an offscreen effect and child actor C), we may have the
following situation happening:
- A redraw is queued on the actor C, actors C and P are marked as
priv->is_dirty and priv->propagated_one_redraw.
- During paint() handling we paint actor P, priv->propagated_one_redraw
is turned off.
- We recurse into child actor C, priv->propagated_one_redraw is turned
off.
- A new redraw is queued on actor C, actors C and P are marked as
priv->is_dirty and priv->propagated_one_redraw.
- The paint() method recurses back, actors C and P get priv->is_dirty
disabled, priv->propagated_one_redraw remains set.
- At this point queueing up more redraws on actor C will not propagate
up, because actor C has priv->propagated_one_redraw set, but the
parent actor P has priv->is_dirty unset, so the offscreen effect will
not get CLUTTER_EFFECT_PAINT_ACTOR_DIRTY and will avoid repainting
actor C.
The end result is that actor C does not redraw again, despite requesting
redraws. This situation eventually resolves itself through e.g. relayouts
on actor P, but may take some time to happen.
In order to fix this, consider actors that did get a further redraw
request still dirty after paint().
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2188
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2353>
Simplify the function arguments (the origin is just the actor that
the function is originally called from), and make it also handle
marking as dirty the actor that got the redraw queued up explicitly.
This makes it a single place where priv->is_dirty is being enabled.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2353>
We not just have X11 devices, but also virtual devices on both backends.
In the mean time, keep these working on top of a ClutterInputDeviceType,
but transform that into capabilities on device construction so users can
rely on the new flagset.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2331>
This fixes instances of:
```
*** BUG ***
In pixman_region32_init_rect: Invalid rectangle passed
Set a breakpoint on '_pixman_log_error' to debug
```
seen when navigating the overview and launching apps.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2349>
The ClutterGestureAction base code would correctly try to cancel a
gesture if it would receive GRAB_NOTIFY leave events (that would indicate
other portions of the actor tree stole input away from the gesture actor),
but it would mistakenly do so only if the gesture was already initiated,
possibly leaving stale point information if the gesture collected input
but didn't initiate yet.
This could be indirectly seen clicking with the mouse on OSK keys with
no motions in between, clicks would accumulate on the swipeTracker
gestures until the trigger point, so the third click could drag the
workspaces.
We do always want to unregister the related device/sequence here, do that
while still cancelling any already initiated gesture.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1907
Fixes: https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/4987
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2334>
We'll need the additional context of which actor the event will be
emitted to in mutters event filter (see next commit), so pass that
target actor to the event filters that are installed.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2321>
It does not make sense that the event "source" (aka the target) is
both content and recipient of a message. Not doing so, events become
largely independent of the actor that is receiving/handling an
event. This is small step toward making events opaque and immutable.
Every user of these API calls in our code have ported away from
them, but other users may remain in extensions, so make these
functions work on top of the alternative API without accessing the
soon to be removed event field.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2311>
This is just "necessary" for --nested stages, since the pointer is
allowed to leave the stage in that case. Since the only side effect
is that there is still a pointer focus somewhere inside the stage,
simply drop this.
This is a small leftover of commit b8f92a6ce4, since we stopped
handling the double ENTER event there.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2311>
In addition to the presented callback time, it shows the time to the
reported presentation time (which can be earlier or later than the
presented callback), as well as the GPU rendering duration.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1928>
The distribute_natural_allocation() function was copied over from Gtk to
Clutter 11 years ago with commit e636a0bbce.
Gtk only supports integers sizes in its layout machinery, while Clutter
does everything using floats.
Since this function sets the minimum_size (the size we allocate the
children in the end) to an integer, this means we're implicitly
typecasting floats to integers here, effectively floor()'ing all sizes
that we allocate the box children.
A bug this caused in gnome-shell was that a scrollView (like the one in
the endSessionDialog) was showing scrollbars even though the content
perfectly fit inside the view: Say the content and its scrollView parent
request a size of 63.9 px, but get allocated a size of 63 px by a box
layout. Now the scrollView notices that its allocated size is smaller
than the requested size and thus shows a scrollbar.
So fix that and use floats in distribute_natural_allocation() instead of
integers, as we do everywhere else in the layout machinery.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2284>
Without input device grabs in play, all functions that emit
pointer/key/crossing/touch events are pretty much the same. Remove this
duplication and use a common emit_event() function.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2100>
In case of misuse (e.g. passing NULL stage) this might result in crashes
before the precondition checks managed to kick in. Move this priv variable
initialization after these checks.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
Wayland event processing and WM operations are themselves outside the
ClutterGrab loop so far. Until this is sorted out, these pieces of
event handling have got to learn to stay aside while there is a
ClutterGrab going on.
So, synchronize foci and other state when grabs come in or out, and
make it sure that Wayland event processing does not happen while
grabs happen.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
Since we want these accessed from bindings this must be a boxed
type. This has the side effect of making ClutterGrab a refcounted
object, since we want to avoid JS from pointing to freed memory
and maybe causing crashes if misusing the object after dismiss.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
Toggling the click action on when leaving the actor/action sounds weird,
this was presumably meant to toggle it off on leave, and back to in_held
on enter. This way, the CLUTTER_LEAVE handling also matches what we want
to do in case of grabs.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
The lack of handling of regular crossing events here is dubious, perhaps
to be fixed later on. So far, ensure gestures are cancelled whenever
a grab-inducted crossing event would leave this action in the blue.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
This is (luckily!) unused, and it's inconvenient to have a toggle to
break the input model we are striving towards. Drop this function
and stick to the default behavior.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2099>
This looks like a relic of glReadPixels-based picking, the pointer
might well be outside redrawn areas, yet still require a device
update (e.g. in order to reflect the actor layout changes in the
"clear area" info).
Instead, always update all devices that are inside the view after
relayouts, the tracking on the need for that update is now done
on each ClutterStageView, instead of globally in the ClutterStage.
This theoretically fixes situations where pointers might miss
updating their "clear area" after the actor tree changed.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/2117
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2257>
The stage window is an interface, that added properties, that were only
then actually managed by MetaStageImpl. Shuffle things slightly, and let
the MetaStageImpl object deal with these things itself.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2014>
As ClutterGrab is a stack, the backend only cares about some grab
existing currently or not. Make it sure that we grab whenever we
go to >=1 grabs, and ungrab whenever we go to <1.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
Dissociate clutter_stage_set_key_focus() from the actors focused
state, so that it obeys stage grabs. The key focus actor state may
also change due to grab changes, add the code to notify about this.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
Emit crossing events whenever a grab coming or going would cause a
pointer/touchpoint to become inactive on their position. Depending
on whether the pointer lies inside the old or new grab widgets,
enter or leave events would be generated.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
We will want to be more specific about the portions of the actor
hierarchy that receive this event, separate creation and emission
so each place does what is relevant.
However, this commit brings no functional changes.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
These events are not meant to be ever silenced away, every actor
that is meant to receive one should do so. Make it sure that those
events cannot be stopped, despite the event signal handlers return
values.
This opens the debate about whether crossing events should be
ClutterEvents, since they are more and more uncommon at being one,
maybe this notification mechanism should be taken away from the
event machinery, but that's something for future refactors.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
Hopefully, the one to make them all converge. This new ClutterGrab
represents a handle on a created grab. These are stacked, so grabs
can be overridden and remain inactive until there is a time that
they become active again, although undoing these early is optional.
These grabs are global, they do apply to all pointer, touchpoint
and keyboard foci.
At the moment, only the API to create and stack those is added,
the actual functionality is added in future commits.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2068>
A property for reversing the visible order of children is a bit odd.
It has also been unused by actual gnome-shell code since 2010, and the
somewhat related pack_start()/pack_end() API in GtkBox(Layout) is gone
in GTK4.
With that in mind, turn the property into a no-op and deprecate it,
so that it can be dropped next cycle.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2206>
This ensures they remain perfectly smooth regardless of how the
dispatch time has been adjusted/optimized/delayed/jittered.
Idea by Ivan Molodetskikh <yalterz@gmail.com>
For example, dragging a window on a 60Hz monitor:
BEFORE
delta(time_us) = 17014μs
delta(time_us) = 15998μs
delta(time_us) = 17006μs
delta(time_us) = 16975μs
delta(time_us) = 16001μs
delta(time_us) = 17002μs
delta(time_us) = 17006μs
delta(time_us) = 16004μs
AFTER
delta(time_us) = 16667μs
delta(time_us) = 16667μs
delta(time_us) = 16670μs
delta(time_us) = 16667μs
delta(time_us) = 16669μs
delta(time_us) = 16668μs
delta(time_us) = 16664μs
delta(time_us) = 16674μs
Caveat 1: Because we don't know a "next presentation time" on the first
frame, the interval between the first and second frame will usually be
different to the subsequent steady interval. So this change increases the
jitter of just frame 2, but eliminates jitter thereafter.
Caveat 2: `clutter_frame_clock_schedule_update_now` schedules updates
earlier than `clutter_frame_clock_schedule_update`. This means potentially
you could get multiple frames targeting the same "next presentation time".
That doesn't really change here though - we're dispatching at the same
times as we used to and just giving timelines a better vsync-aligned
timestamp now.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/25
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2161>
This won't change anything for 60Hz displays but higher refresh rate
users will benefit.
Using Nvidia EGLStreams on a 240Hz monitor for example (refresh interval
~4.1ms), the maximum render time allowed before dropping to 120Hz is now
3.6ms whereas it was previously 2.1ms.
Part-of: <https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2158>
