ClutterLayerNode currently skips pushing and popping its framebuffer
to the paint context when no rectangles are added to it. However,
it's still useful to do that, since we might want to render child
nodes to the offscreen and reuse the pipeline in a later node.
Make ClutterLayerNode push and pop its framebuffer even without
rectangles.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
ClutterLayerNode is the "offscreen framebuffer" node, that paints
it's child nodes in a separate framebuffer, and then copies that
framebuffer to the parent one.
It'll be useful to hand ClutterLayerNode which framebuffer to use,
as this is a requirement for porting e.g. ClutterOffscreenEffect
and subclasses.
Add a new clutter_layer_node_new_with_framebuffer() API.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
ClutterPipelineNode will be used by GNOME Shell in the future.
Fortunately for us, CoglPipeline is already usable from GJS,
so we don't need to skip the constructor for the pipeline node.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
Some effects, such as ShellBlurEffect and ClutterOffscreenEffect, need
to make sure the actor is painted fully opaque. With ClutterActorNode,
however, that is currently not possible.
Add a new 'opacity' parameter to clutter_actor_node_new(). It follows
the opacity override heuristic, where -1 means disable, and anything
else is clamped to [0, 255].
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
Move the framebuffer cleanup to ClutterOffscreenEffect.pre_paint().
This will allow us to properly chain up ClutterOffscreenEffect.paint()
and not reimplement exactly what ClutterEffect does by default.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
Introduce a new paint_node vfunc that, if implemented, allows
the effect to add nodes to a transient paint node that is
immediately painted. This is a transitional step until we
have fully delegated paint node rendering.
The most basic implementation of a ClutterEffect.paint_node
vfunc, and also the default implementation, is with an actor
node, as follows:
```
static void
foo_bar_paint_node (ClutterEffect *effect,
ClutterPaintNode *node,
ClutterPaintContext *paint_context,
ClutterEffectPaintFlags flags)
{
g_autoptr (ClutterPaintNode) actor_node = NULL;
actor_node = clutter_actor_node_new (effect->actor);
clutter_paint_node_add_child (node, actor_node);
}
```
This example gives the exact same behavior of simply calling
clutter_actor_continue_paint(). In the future, the paint node
itself will be a parameter of clutter_actor_continue_paint()
and we'll be able to simplify it event more.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
ClutterEffectNode is a private ClutterPaintNode implementation
that does effectively nothing, but helps organizing the paint
node tree. It also helps debugging, since it can output the
effect class and name to the JSON debugging routines.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
The idea of having a paint node tree is that we don't really need
to retrieve the framebuffer from ClutterPaintContext. For example,
ClutterLayerNode draws into an offscreen framebuffer; if any child
of a layer node needs to retrieve a framebuffer to draw, the layer
node's offscreen framebuffer should be used.
However, clutter_paint_node_get_framebuffer() goes straight to the
root node of the tree, skipping any potential paint nodes with a
custom framebuffer.
Modify clutter_paint_node_get_framebuffer() to walk up the paint
node tree until a node with a custom framebuffer appears. In many
cases, this will end up either in dummy or layer node's custom
framebuffer implementations.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1340
It is linear config manager created when ensuring configuration.
However, the switch config is not set as LINEAR, but left as UNKNOWN.
This leads switch mode OSD always shows "Join Displays" icon, rather
than the next icon which is "External Only" after connect an external
display and press Super+P once at first time since mutter starts.
This patch moves switch config setting into
meta_monitor_config_manager_create_linear() (and the sibling functions)
to well prepare the monitors config and avoid missing settings.
This is a regression introduced by 149e4d6934.
Fixes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1362
Clients can set minimum and maximum to identical values to indicate a
fixed-size window. A compositor can ignore these requests and thus a client
has to ensure these limits.
To support clients that do not ensure these size limits by themselves and
to skip unnecessary function calls, we will prevent resizing requests by
the client if a fixed-size has been requested.
https://gitlab.gnome.org/GNOME/mutter/-/issues/1331
This was from the old clutter-as-application-library days, where it had
to try find a suitable backend. Now we already have a backend selected
(MetaBackend), and the clutter backend is already predecided depending
on that, so we don't need the code that auto detects an appropriate one
anymore.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
We're moving towards not supporting stand-alone application style
clutter stages, meaning the stage tests use will be reused instead of
recreated. To make this feasable, tests must clean up after themself.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
meta_run() is still left intact and does the same as before; the new
functions are only intended to be used by tests, as they may need to set
things up after starting up. Doing so linearly in the test case is much
easier than adding callbacks, so meta_run() is split up to make this
possible.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
There is no reason to use Xsettings for the X11 backend, as it comes
from the GSetting store anyway, so move the font setting reading to
ClutterSettings and read directly from GSettings.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
The delete event was used for signalling the close button was clicked on
clutter windows. Being a compositor we should never see these, unless
we're running nested. Remove the plumbing of the DELETE event and just
directly call meta_quit() when we see it, if we're running nested.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
We checked if we were using the usig the X11 backend to decide when to
deal with a11y event posting - in order to make the clutter code less
windowing system dependent, make this check a check whether we're a
display server or not, in contrast to a window/compositing manager
client. This is made into a vfunc ot ClutterBackendClass, implemented by
MetaClutterBackendNative and MetaClutterBackendX11.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1364
Test that if a timeline got its frame clock from a parent of the
associated actor, if that actor moves across the stage so that the stage
views changes and thus the would be picked frame clock too, this is
noticed by the timeline so that it also changes to the correct frame
clock.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Timelines where the frame clock was picked from a parent of the
associated actor didn't get notified about any stage views changes, as
it only listened on the associated actor. If that actor didn't actually
get its stage views changed (because it went from empty to empty), we'd
end up with a stale frame clock, leading to crashes.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
When we pick the frame clock given the associated actor, that frame
clock in fact comes from a picked actor. In order to not end up with
stale frame clocks, which may happen on e.g. hotplugs, monitor layout
changes, or non-optimal frame clocks, which may happen when the parent
used for picking the clock moves to another view, lets listen to
'stage-views-changed' on the actor used for picking the clock too.
Closes: https://gitlab.gnome.org/GNOME/mutter/-/issues/1327https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Flip flop resize, which is the result of respecting ConfigureNotify
makes test annoyingly racy, as one cannot do
clutter_actor_set_size (stage, 1024, 768);
wait_for_paint (stage);
g_assert_assert (clutter_actor_get_width (stage) == 1024);
The reason for this is any lingering ConfigureNotify event that might
arrive in an inconvenient time in response to some earlier resize.
In order to not risk breaking any current behavior in the X11 CM case
(running as a compositing window manager), only avoid changing the stage
size in response to ConfigureNotify when running nested.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
Let's not expose that outside of mutter quite yet; it's not used in
gnome-shell, and to avoid future breakage if it starts to be used, lets
move it to clutter-mutter.h so only mutter and clutter itself can use
it.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
This aims to make sure a view and its resources are destroyed when it
should. Using references might keep certain components (e.g frame clock)
alive for too long.
We currently don't take any long lived references to the stage view
anywhere, so this doesn't matter in practice, but this may change, and
will be used by a to be added test case.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1404
In order to run gnome-shell as part of the CI pipeline, we need
an additional runtime dependency plus python3 modules to mock
required system services and run gnome-shell-perf-tool.
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/1401
Just as wl_shm, hook up the Wayland DMA-BUF protocol to the 64 bit half
point pixel formats too. This makes it possible for Wayland EGL clients
to use 64 bit pixel EGL configurations.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
Now that cogl understands them, hook wl_shm up so they can be used.
This also bumps the wayland-server version dependency to 1.17.90, which
corresponds to the master branch of wayland. The new formats will be
available in 1.18.0.
https://gitlab.gnome.org/GNOME/mutter/merge_requests/804
