mutter/cogl/cogl-path/cogl-path.c

1562 lines
43 KiB
C
Raw Permalink Normal View History

/*
* Cogl
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* A Low Level GPU Graphics and Utilities API
*
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
* Copyright (C) 2007,2008,2009,2010,2013 Intel Corporation.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy,
* modify, merge, publish, distribute, sublicense, and/or sell copies
* of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
This re-licenses Cogl 1.18 under the MIT license Since the Cogl 1.18 branch is actively maintained in parallel with the master branch; this is a counter part to commit 1b83ef938fc16b which re-licensed the master branch to use the MIT license. This re-licensing is a follow up to the proposal that was sent to the Cogl mailing list: http://lists.freedesktop.org/archives/cogl/2013-December/001465.html Note: there was a copyright assignment policy in place for Clutter (and therefore Cogl which was part of Clutter at the time) until the 11th of June 2010 and so we only checked the details after that point (commit 0bbf50f905) For each file, authors were identified via this Git command: $ git blame -p -C -C -C20 -M -M10 0bbf50f905..HEAD We received blanket approvals for re-licensing all Red Hat and Collabora contributions which reduced how many people needed to be contacted individually: - http://lists.freedesktop.org/archives/cogl/2013-December/001470.html - http://lists.freedesktop.org/archives/cogl/2014-January/001536.html Individual approval requests were sent to all the other identified authors who all confirmed the re-license on the Cogl mailinglist: http://lists.freedesktop.org/archives/cogl/2014-January As well as updating the copyright header in all sources files, the COPYING file has been updated to reflect the license change and also document the other licenses used in Cogl such as the SGI Free Software License B, version 2.0 and the 3-clause BSD license. This patch was not simply cherry-picked from master; but the same methodology was used to check the source files.
2014-02-21 20:28:54 -05:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Ivan Leben <ivan@openedhand.com>
* Øyvind Kolås <pippin@linux.intel.com>
* Neil Roberts <neil@linux.intel.com>
* Robert Bragg <robert@linux.intel.com>
*/
#include "cogl-config.h"
#include "cogl-util.h"
#include "cogl-object.h"
#include "cogl-context-private.h"
#include "cogl-journal-private.h"
#include "cogl-pipeline-private.h"
#include "cogl-framebuffer-private.h"
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
#include "cogl-primitive-private.h"
#include "cogl-texture-private.h"
#include "cogl-primitives-private.h"
#include "cogl-private.h"
#include "cogl-attribute-private.h"
#include "cogl1-context.h"
#include "tesselator/tesselator.h"
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
#include "cogl-path/cogl-path.h"
#include "cogl-path-private.h"
#include "cogl-gtype-private.h"
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
#include <string.h>
#include <math.h>
#define _COGL_MAX_BEZ_RECURSE_DEPTH 16
static void _cogl_path_free (CoglPath *path);
static void _cogl_path_build_fill_attribute_buffer (CoglPath *path);
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
static CoglPrimitive *_cogl_path_get_fill_primitive (CoglPath *path);
static void _cogl_path_build_stroke_attribute_buffer (CoglPath *path);
COGL_OBJECT_DEFINE (Path, path);
COGL_GTYPE_DEFINE_CLASS (Path, path);
static void
_cogl_path_data_clear_vbos (CoglPathData *data)
{
int i;
if (data->fill_attribute_buffer)
{
cogl_object_unref (data->fill_attribute_buffer);
cogl_object_unref (data->fill_vbo_indices);
for (i = 0; i < COGL_PATH_N_ATTRIBUTES; i++)
cogl_object_unref (data->fill_attributes[i]);
data->fill_attribute_buffer = NULL;
}
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
if (data->fill_primitive)
{
cogl_object_unref (data->fill_primitive);
data->fill_primitive = NULL;
}
if (data->stroke_attribute_buffer)
{
cogl_object_unref (data->stroke_attribute_buffer);
for (i = 0; i < data->stroke_n_attributes; i++)
cogl_object_unref (data->stroke_attributes[i]);
g_free (data->stroke_attributes);
data->stroke_attribute_buffer = NULL;
}
}
static void
_cogl_path_data_unref (CoglPathData *data)
{
if (--data->ref_count <= 0)
{
_cogl_path_data_clear_vbos (data);
g_array_free (data->path_nodes, TRUE);
g_slice_free (CoglPathData, data);
}
}
static void
_cogl_path_modify (CoglPath *path)
{
/* This needs to be called whenever the path is about to be modified
to implement copy-on-write semantics */
/* If there is more than one path using the data then we need to
copy the data instead */
if (path->data->ref_count != 1)
{
CoglPathData *old_data = path->data;
path->data = g_slice_dup (CoglPathData, old_data);
path->data->path_nodes = g_array_new (FALSE, FALSE,
sizeof (CoglPathNode));
g_array_append_vals (path->data->path_nodes,
old_data->path_nodes->data,
old_data->path_nodes->len);
path->data->fill_attribute_buffer = NULL;
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
path->data->fill_primitive = NULL;
path->data->stroke_attribute_buffer = NULL;
path->data->ref_count = 1;
_cogl_path_data_unref (old_data);
}
else
/* The path is altered so the vbos will now be invalid */
_cogl_path_data_clear_vbos (path->data);
}
void
cogl2_path_set_fill_rule (CoglPath *path,
CoglPathFillRule fill_rule)
{
g_return_if_fail (cogl_is_path (path));
if (path->data->fill_rule != fill_rule)
{
_cogl_path_modify (path);
path->data->fill_rule = fill_rule;
}
}
CoglPathFillRule
cogl2_path_get_fill_rule (CoglPath *path)
{
g_return_val_if_fail (cogl_is_path (path), COGL_PATH_FILL_RULE_NON_ZERO);
return path->data->fill_rule;
}
static void
_cogl_path_add_node (CoglPath *path,
gboolean new_sub_path,
float x,
float y)
{
CoglPathNode new_node;
CoglPathData *data;
_cogl_path_modify (path);
data = path->data;
new_node.x = x;
new_node.y = y;
new_node.path_size = 0;
if (new_sub_path || data->path_nodes->len == 0)
data->last_path = data->path_nodes->len;
g_array_append_val (data->path_nodes, new_node);
g_array_index (data->path_nodes, CoglPathNode, data->last_path).path_size++;
if (data->path_nodes->len == 1)
{
data->path_nodes_min.x = data->path_nodes_max.x = x;
data->path_nodes_min.y = data->path_nodes_max.y = y;
}
else
{
if (x < data->path_nodes_min.x)
data->path_nodes_min.x = x;
if (x > data->path_nodes_max.x)
data->path_nodes_max.x = x;
if (y < data->path_nodes_min.y)
data->path_nodes_min.y = y;
if (y > data->path_nodes_max.y)
data->path_nodes_max.y = y;
}
/* Once the path nodes have been modified then we'll assume it's no
longer a rectangle. cogl2_path_rectangle will set this back to
TRUE if this has been called from there */
data->is_rectangle = FALSE;
}
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
static void
_cogl_path_stroke_nodes (CoglPath *path,
CoglFramebuffer *framebuffer,
CoglPipeline *pipeline)
{
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
CoglPathData *data;
CoglPipeline *copy = NULL;
unsigned int path_start;
int path_num = 0;
CoglPathNode *node;
g_return_if_fail (cogl_is_path (path));
g_return_if_fail (cogl_is_framebuffer (framebuffer));
g_return_if_fail (cogl_is_pipeline (pipeline));
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
data = path->data;
if (data->path_nodes->len == 0)
return;
if (cogl_pipeline_get_n_layers (pipeline) != 0)
{
copy = cogl_pipeline_copy (pipeline);
_cogl_pipeline_prune_to_n_layers (copy, 0);
pipeline = copy;
}
_cogl_path_build_stroke_attribute_buffer (path);
for (path_start = 0;
path_start < data->path_nodes->len;
path_start += node->path_size)
{
CoglPrimitive *primitive;
node = &g_array_index (data->path_nodes, CoglPathNode, path_start);
primitive =
cogl_primitive_new_with_attributes (COGL_VERTICES_MODE_LINE_STRIP,
node->path_size,
&data->stroke_attributes[path_num],
1);
cogl_primitive_draw (primitive, framebuffer, pipeline);
cogl_object_unref (primitive);
path_num++;
}
if (copy)
cogl_object_unref (copy);
}
void
_cogl_path_get_bounds (CoglPath *path,
float *min_x,
float *min_y,
float *max_x,
float *max_y)
{
CoglPathData *data = path->data;
if (data->path_nodes->len == 0)
{
*min_x = 0.0f;
*min_y = 0.0f;
*max_x = 0.0f;
*max_y = 0.0f;
}
else
{
*min_x = data->path_nodes_min.x;
*min_y = data->path_nodes_min.y;
*max_x = data->path_nodes_max.x;
*max_y = data->path_nodes_max.y;
}
}
static void
_cogl_path_fill_nodes_with_clipped_rectangle (CoglPath *path,
CoglFramebuffer *framebuffer,
CoglPipeline *pipeline)
{
/* We need at least three stencil bits to combine clips */
if (_cogl_framebuffer_get_stencil_bits (framebuffer) >= 3)
{
static gboolean seen_warning = FALSE;
if (!seen_warning)
{
g_warning ("Paths can not be filled using materials with "
"sliced textures unless there is a stencil "
"buffer");
seen_warning = TRUE;
}
}
cogl_framebuffer_push_path_clip (framebuffer, path);
cogl_framebuffer_draw_rectangle (framebuffer,
pipeline,
path->data->path_nodes_min.x,
path->data->path_nodes_min.y,
path->data->path_nodes_max.x,
path->data->path_nodes_max.y);
cogl_framebuffer_pop_clip (framebuffer);
}
static gboolean
validate_layer_cb (CoglPipelineLayer *layer, void *user_data)
{
gboolean *needs_fallback = user_data;
CoglTexture *texture = _cogl_pipeline_layer_get_texture (layer);
/* If any of the layers of the current pipeline contain sliced
* textures or textures with waste then it won't work to draw the
* path directly. Instead we fallback to pushing the path as a clip
* on the clip-stack and drawing the path's bounding rectangle
* instead.
*/
if (texture != NULL && (cogl_texture_is_sliced (texture) ||
!_cogl_texture_can_hardware_repeat (texture)))
*needs_fallback = TRUE;
return !*needs_fallback;
}
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
static void
_cogl_path_fill_nodes (CoglPath *path,
CoglFramebuffer *framebuffer,
CoglPipeline *pipeline,
CoglDrawFlags flags)
{
if (path->data->path_nodes->len == 0)
return;
/* If the path is a simple rectangle then we can divert to using
cogl_framebuffer_draw_rectangle which should be faster because it
can go through the journal instead of uploading the geometry just
for two triangles */
if (path->data->is_rectangle && flags == 0)
{
float x_1, y_1, x_2, y_2;
_cogl_path_get_bounds (path, &x_1, &y_1, &x_2, &y_2);
cogl_framebuffer_draw_rectangle (framebuffer,
pipeline,
x_1, y_1,
x_2, y_2);
}
else
{
gboolean needs_fallback = FALSE;
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
CoglPrimitive *primitive;
_cogl_pipeline_foreach_layer_internal (pipeline,
validate_layer_cb,
&needs_fallback);
if (needs_fallback)
{
_cogl_path_fill_nodes_with_clipped_rectangle (path,
framebuffer,
pipeline);
return;
}
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
primitive = _cogl_path_get_fill_primitive (path);
_cogl_primitive_draw (primitive, framebuffer, pipeline, flags);
}
}
void
cogl2_path_move_to (CoglPath *path,
float x,
float y)
{
CoglPathData *data;
g_return_if_fail (cogl_is_path (path));
_cogl_path_add_node (path, TRUE, x, y);
data = path->data;
data->path_start.x = x;
data->path_start.y = y;
data->path_pen = data->path_start;
}
void
cogl2_path_rel_move_to (CoglPath *path,
float x,
float y)
{
CoglPathData *data;
g_return_if_fail (cogl_is_path (path));
data = path->data;
cogl2_path_move_to (path,
data->path_pen.x + x,
data->path_pen.y + y);
}
void
cogl2_path_line_to (CoglPath *path,
float x,
float y)
{
CoglPathData *data;
g_return_if_fail (cogl_is_path (path));
_cogl_path_add_node (path, FALSE, x, y);
data = path->data;
data->path_pen.x = x;
data->path_pen.y = y;
}
void
cogl2_path_rel_line_to (CoglPath *path,
float x,
float y)
{
CoglPathData *data;
g_return_if_fail (cogl_is_path (path));
data = path->data;
cogl2_path_line_to (path,
data->path_pen.x + x,
data->path_pen.y + y);
}
void
cogl2_path_close (CoglPath *path)
{
g_return_if_fail (cogl_is_path (path));
_cogl_path_add_node (path, FALSE, path->data->path_start.x,
path->data->path_start.y);
path->data->path_pen = path->data->path_start;
}
void
cogl2_path_line (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2)
{
cogl2_path_move_to (path, x_1, y_1);
cogl2_path_line_to (path, x_2, y_2);
}
void
cogl2_path_polyline (CoglPath *path,
const float *coords,
int num_points)
{
int c = 0;
g_return_if_fail (cogl_is_path (path));
cogl2_path_move_to (path, coords[0], coords[1]);
for (c = 1; c < num_points; ++c)
cogl2_path_line_to (path, coords[2*c], coords[2*c+1]);
}
void
cogl2_path_polygon (CoglPath *path,
const float *coords,
int num_points)
{
cogl2_path_polyline (path, coords, num_points);
cogl2_path_close (path);
}
void
cogl2_path_rectangle (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2)
{
gboolean is_rectangle;
/* If the path was previously empty and the rectangle isn't mirrored
then we'll record that this is a simple rectangle path so that we
can optimise it */
is_rectangle = (path->data->path_nodes->len == 0 &&
x_2 >= x_1 &&
y_2 >= y_1);
cogl2_path_move_to (path, x_1, y_1);
cogl2_path_line_to (path, x_2, y_1);
cogl2_path_line_to (path, x_2, y_2);
cogl2_path_line_to (path, x_1, y_2);
cogl2_path_close (path);
path->data->is_rectangle = is_rectangle;
}
gboolean
_cogl_path_is_rectangle (CoglPath *path)
{
return path->data->is_rectangle;
}
static void
_cogl_path_arc (CoglPath *path,
float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2,
float angle_step,
unsigned int move_first)
{
float a = 0x0;
float cosa = 0x0;
float sina = 0x0;
float px = 0x0;
float py = 0x0;
/* Fix invalid angles */
if (angle_1 == angle_2 || angle_step == 0x0)
return;
if (angle_step < 0x0)
angle_step = -angle_step;
/* Walk the arc by given step */
a = angle_1;
while (a != angle_2)
{
cosa = cosf (a * (G_PI/180.0));
sina = sinf (a * (G_PI/180.0));
px = center_x + (cosa * radius_x);
py = center_y + (sina * radius_y);
if (a == angle_1 && move_first)
cogl2_path_move_to (path, px, py);
else
cogl2_path_line_to (path, px, py);
if (G_LIKELY (angle_2 > angle_1))
{
a += angle_step;
if (a > angle_2)
a = angle_2;
}
else
{
a -= angle_step;
if (a < angle_2)
a = angle_2;
}
}
/* Make sure the final point is drawn */
cosa = cosf (angle_2 * (G_PI/180.0));
sina = sinf (angle_2 * (G_PI/180.0));
px = center_x + (cosa * radius_x);
py = center_y + (sina * radius_y);
cogl2_path_line_to (path, px, py);
}
void
cogl2_path_arc (CoglPath *path,
float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2)
{
float angle_step = 10;
g_return_if_fail (cogl_is_path (path));
/* it is documented that a move to is needed to create a freestanding
* arc
*/
_cogl_path_arc (path,
center_x, center_y,
radius_x, radius_y,
angle_1, angle_2,
angle_step, 0 /* no move */);
}
static void
_cogl_path_rel_arc (CoglPath *path,
float center_x,
float center_y,
float radius_x,
float radius_y,
float angle_1,
float angle_2,
float angle_step)
{
CoglPathData *data;
data = path->data;
_cogl_path_arc (path,
data->path_pen.x + center_x,
data->path_pen.y + center_y,
radius_x, radius_y,
angle_1, angle_2,
angle_step, 0 /* no move */);
}
void
cogl2_path_ellipse (CoglPath *path,
float center_x,
float center_y,
float radius_x,
float radius_y)
{
float angle_step = 10;
g_return_if_fail (cogl_is_path (path));
/* FIXME: if shows to be slow might be optimized
* by mirroring just a quarter of it */
_cogl_path_arc (path,
center_x, center_y,
radius_x, radius_y,
0, 360,
angle_step, 1 /* move first */);
cogl2_path_close (path);
}
void
cogl2_path_round_rectangle (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2,
float radius,
float arc_step)
{
float inner_width = x_2 - x_1 - radius * 2;
float inner_height = y_2 - y_1 - radius * 2;
g_return_if_fail (cogl_is_path (path));
cogl2_path_move_to (path, x_1, y_1 + radius);
_cogl_path_rel_arc (path,
radius, 0,
radius, radius,
180,
270,
arc_step);
cogl2_path_line_to (path,
path->data->path_pen.x + inner_width,
path->data->path_pen.y);
_cogl_path_rel_arc (path,
0, radius,
radius, radius,
-90,
0,
arc_step);
cogl2_path_line_to (path,
path->data->path_pen.x,
path->data->path_pen.y + inner_height);
_cogl_path_rel_arc (path,
-radius, 0,
radius, radius,
0,
90,
arc_step);
cogl2_path_line_to (path,
path->data->path_pen.x - inner_width,
path->data->path_pen.y);
_cogl_path_rel_arc (path,
0, -radius,
radius, radius,
90,
180,
arc_step);
cogl2_path_close (path);
}
static void
_cogl_path_bezier3_sub (CoglPath *path,
CoglBezCubic *cubic)
{
CoglBezCubic cubics[_COGL_MAX_BEZ_RECURSE_DEPTH];
CoglBezCubic *cleft;
CoglBezCubic *cright;
CoglBezCubic *c;
floatVec2 dif1;
floatVec2 dif2;
floatVec2 mm;
floatVec2 c1;
floatVec2 c2;
floatVec2 c3;
floatVec2 c4;
floatVec2 c5;
int cindex;
/* Put first curve on stack */
cubics[0] = *cubic;
cindex = 0;
while (cindex >= 0)
{
c = &cubics[cindex];
/* Calculate distance of control points from their
* counterparts on the line between end points */
dif1.x = (c->p2.x * 3) - (c->p1.x * 2) - c->p4.x;
dif1.y = (c->p2.y * 3) - (c->p1.y * 2) - c->p4.y;
dif2.x = (c->p3.x * 3) - (c->p4.x * 2) - c->p1.x;
dif2.y = (c->p3.y * 3) - (c->p4.y * 2) - c->p1.y;
if (dif1.x < 0)
dif1.x = -dif1.x;
if (dif1.y < 0)
dif1.y = -dif1.y;
if (dif2.x < 0)
dif2.x = -dif2.x;
if (dif2.y < 0)
dif2.y = -dif2.y;
/* Pick the greatest of two distances */
if (dif1.x < dif2.x) dif1.x = dif2.x;
if (dif1.y < dif2.y) dif1.y = dif2.y;
/* Cancel if the curve is flat enough */
if (dif1.x + dif1.y <= 1.0 ||
cindex == _COGL_MAX_BEZ_RECURSE_DEPTH-1)
{
/* Add subdivision point (skip last) */
if (cindex == 0)
return;
_cogl_path_add_node (path, FALSE, c->p4.x, c->p4.y);
--cindex;
continue;
}
/* Left recursion goes on top of stack! */
cright = c; cleft = &cubics[++cindex];
/* Subdivide into 2 sub-curves */
c1.x = ((c->p1.x + c->p2.x) / 2);
c1.y = ((c->p1.y + c->p2.y) / 2);
mm.x = ((c->p2.x + c->p3.x) / 2);
mm.y = ((c->p2.y + c->p3.y) / 2);
c5.x = ((c->p3.x + c->p4.x) / 2);
c5.y = ((c->p3.y + c->p4.y) / 2);
c2.x = ((c1.x + mm.x) / 2);
c2.y = ((c1.y + mm.y) / 2);
c4.x = ((mm.x + c5.x) / 2);
c4.y = ((mm.y + c5.y) / 2);
c3.x = ((c2.x + c4.x) / 2);
c3.y = ((c2.y + c4.y) / 2);
/* Add left recursion to stack */
cleft->p1 = c->p1;
cleft->p2 = c1;
cleft->p3 = c2;
cleft->p4 = c3;
/* Add right recursion to stack */
cright->p1 = c3;
cright->p2 = c4;
cright->p3 = c5;
cright->p4 = c->p4;
}
}
void
cogl2_path_curve_to (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3)
{
CoglBezCubic cubic;
g_return_if_fail (cogl_is_path (path));
/* Prepare cubic curve */
cubic.p1 = path->data->path_pen;
cubic.p2.x = x_1;
cubic.p2.y = y_1;
cubic.p3.x = x_2;
cubic.p3.y = y_2;
cubic.p4.x = x_3;
cubic.p4.y = y_3;
/* Run subdivision */
_cogl_path_bezier3_sub (path, &cubic);
/* Add last point */
_cogl_path_add_node (path, FALSE, cubic.p4.x, cubic.p4.y);
path->data->path_pen = cubic.p4;
}
void
cogl2_path_rel_curve_to (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2,
float x_3,
float y_3)
{
CoglPathData *data;
g_return_if_fail (cogl_is_path (path));
data = path->data;
cogl2_path_curve_to (path,
data->path_pen.x + x_1,
data->path_pen.y + y_1,
data->path_pen.x + x_2,
data->path_pen.y + y_2,
data->path_pen.x + x_3,
data->path_pen.y + y_3);
}
CoglPath *
cogl2_path_new (void)
{
CoglPath *path;
CoglPathData *data;
_COGL_GET_CONTEXT (ctx, NULL);
path = g_slice_new (CoglPath);
data = path->data = g_slice_new (CoglPathData);
data->ref_count = 1;
data->context = ctx;
data->fill_rule = COGL_PATH_FILL_RULE_EVEN_ODD;
data->path_nodes = g_array_new (FALSE, FALSE, sizeof (CoglPathNode));
data->last_path = 0;
data->fill_attribute_buffer = NULL;
data->stroke_attribute_buffer = NULL;
data->fill_primitive = NULL;
data->is_rectangle = FALSE;
return _cogl_path_object_new (path);
}
CoglPath *
cogl_path_copy (CoglPath *old_path)
{
CoglPath *new_path;
g_return_val_if_fail (cogl_is_path (old_path), NULL);
new_path = g_slice_new (CoglPath);
new_path->data = old_path->data;
new_path->data->ref_count++;
return _cogl_path_object_new (new_path);
}
static void
_cogl_path_free (CoglPath *path)
{
_cogl_path_data_unref (path->data);
g_slice_free (CoglPath, path);
}
/* If second order beziers were needed the following code could
* be re-enabled:
*/
#if 0
static void
_cogl_path_bezier2_sub (CoglPath *path,
CoglBezQuad *quad)
{
CoglBezQuad quads[_COGL_MAX_BEZ_RECURSE_DEPTH];
CoglBezQuad *qleft;
CoglBezQuad *qright;
CoglBezQuad *q;
floatVec2 mid;
floatVec2 dif;
floatVec2 c1;
floatVec2 c2;
floatVec2 c3;
int qindex;
/* Put first curve on stack */
quads[0] = *quad;
qindex = 0;
/* While stack is not empty */
while (qindex >= 0)
{
q = &quads[qindex];
/* Calculate distance of control point from its
* counterpart on the line between end points */
mid.x = ((q->p1.x + q->p3.x) / 2);
mid.y = ((q->p1.y + q->p3.y) / 2);
dif.x = (q->p2.x - mid.x);
dif.y = (q->p2.y - mid.y);
if (dif.x < 0) dif.x = -dif.x;
if (dif.y < 0) dif.y = -dif.y;
/* Cancel if the curve is flat enough */
if (dif.x + dif.y <= 1.0 ||
qindex == _COGL_MAX_BEZ_RECURSE_DEPTH - 1)
{
/* Add subdivision point (skip last) */
if (qindex == 0) return;
_cogl_path_add_node (path, FALSE, q->p3.x, q->p3.y);
--qindex; continue;
}
/* Left recursion goes on top of stack! */
qright = q; qleft = &quads[++qindex];
/* Subdivide into 2 sub-curves */
c1.x = ((q->p1.x + q->p2.x) / 2);
c1.y = ((q->p1.y + q->p2.y) / 2);
c3.x = ((q->p2.x + q->p3.x) / 2);
c3.y = ((q->p2.y + q->p3.y) / 2);
c2.x = ((c1.x + c3.x) / 2);
c2.y = ((c1.y + c3.y) / 2);
/* Add left recursion onto stack */
qleft->p1 = q->p1;
qleft->p2 = c1;
qleft->p3 = c2;
/* Add right recursion onto stack */
qright->p1 = c2;
qright->p2 = c3;
qright->p3 = q->p3;
}
}
void
cogl_path_curve2_to (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2)
{
CoglBezQuad quad;
/* Prepare quadratic curve */
quad.p1 = path->data->path_pen;
quad.p2.x = x_1;
quad.p2.y = y_1;
quad.p3.x = x_2;
quad.p3.y = y_2;
/* Run subdivision */
_cogl_path_bezier2_sub (&quad);
/* Add last point */
_cogl_path_add_node (FALSE, quad.p3.x, quad.p3.y);
path->data->path_pen = quad.p3;
}
void
cogl_rel_curve2_to (CoglPath *path,
float x_1,
float y_1,
float x_2,
float y_2)
{
CoglPathData *data;
g_return_if_fail (cogl_is_path (path));
data = path->data;
cogl_path_curve2_to (data->path_pen.x + x_1,
data->path_pen.y + y_1,
data->path_pen.x + x_2,
data->path_pen.y + y_2);
}
#endif
typedef struct _CoglPathTesselator CoglPathTesselator;
typedef struct _CoglPathTesselatorVertex CoglPathTesselatorVertex;
struct _CoglPathTesselator
{
GLUtesselator *glu_tess;
GLenum primitive_type;
int vertex_number;
/* Array of CoglPathTesselatorVertex. This needs to grow when the
combine callback is called */
GArray *vertices;
/* Array of integers for the indices into the vertices array. Each
element will either be uint8_t, uint16_t or uint32_t depending on
the number of vertices */
GArray *indices;
CoglIndicesType indices_type;
/* Indices used to split fans and strips */
int index_a, index_b;
};
struct _CoglPathTesselatorVertex
{
float x, y, s, t;
};
static void
_cogl_path_tesselator_begin (GLenum type,
CoglPathTesselator *tess)
{
g_assert (type == GL_TRIANGLES ||
type == GL_TRIANGLE_FAN ||
type == GL_TRIANGLE_STRIP);
tess->primitive_type = type;
tess->vertex_number = 0;
}
static CoglIndicesType
_cogl_path_tesselator_get_indices_type_for_size (int n_vertices)
{
if (n_vertices <= 256)
return COGL_INDICES_TYPE_UNSIGNED_BYTE;
else if (n_vertices <= 65536)
return COGL_INDICES_TYPE_UNSIGNED_SHORT;
else
return COGL_INDICES_TYPE_UNSIGNED_INT;
}
static void
_cogl_path_tesselator_allocate_indices_array (CoglPathTesselator *tess)
{
switch (tess->indices_type)
{
case COGL_INDICES_TYPE_UNSIGNED_BYTE:
tess->indices = g_array_new (FALSE, FALSE, sizeof (uint8_t));
break;
case COGL_INDICES_TYPE_UNSIGNED_SHORT:
tess->indices = g_array_new (FALSE, FALSE, sizeof (uint16_t));
break;
case COGL_INDICES_TYPE_UNSIGNED_INT:
tess->indices = g_array_new (FALSE, FALSE, sizeof (uint32_t));
break;
}
}
static void
_cogl_path_tesselator_add_index (CoglPathTesselator *tess, int vertex_index)
{
switch (tess->indices_type)
{
case COGL_INDICES_TYPE_UNSIGNED_BYTE:
{
uint8_t val = vertex_index;
g_array_append_val (tess->indices, val);
}
break;
case COGL_INDICES_TYPE_UNSIGNED_SHORT:
{
uint16_t val = vertex_index;
g_array_append_val (tess->indices, val);
}
break;
case COGL_INDICES_TYPE_UNSIGNED_INT:
{
uint32_t val = vertex_index;
g_array_append_val (tess->indices, val);
}
break;
}
}
static void
_cogl_path_tesselator_vertex (void *vertex_data,
CoglPathTesselator *tess)
{
int vertex_index;
vertex_index = GPOINTER_TO_INT (vertex_data);
/* This tries to convert all of the primitives into GL_TRIANGLES
with indices to share vertices */
switch (tess->primitive_type)
{
case GL_TRIANGLES:
/* Directly use the vertex */
_cogl_path_tesselator_add_index (tess, vertex_index);
break;
case GL_TRIANGLE_FAN:
if (tess->vertex_number == 0)
tess->index_a = vertex_index;
else if (tess->vertex_number == 1)
tess->index_b = vertex_index;
else
{
/* Create a triangle with the first vertex, the previous
vertex and this vertex */
_cogl_path_tesselator_add_index (tess, tess->index_a);
_cogl_path_tesselator_add_index (tess, tess->index_b);
_cogl_path_tesselator_add_index (tess, vertex_index);
/* Next time we will use this vertex as the previous
vertex */
tess->index_b = vertex_index;
}
break;
case GL_TRIANGLE_STRIP:
if (tess->vertex_number == 0)
tess->index_a = vertex_index;
else if (tess->vertex_number == 1)
tess->index_b = vertex_index;
else
{
_cogl_path_tesselator_add_index (tess, tess->index_a);
_cogl_path_tesselator_add_index (tess, tess->index_b);
_cogl_path_tesselator_add_index (tess, vertex_index);
if (tess->vertex_number & 1)
tess->index_b = vertex_index;
else
tess->index_a = vertex_index;
}
break;
default:
g_assert_not_reached ();
}
tess->vertex_number++;
}
static void
_cogl_path_tesselator_end (CoglPathTesselator *tess)
{
tess->primitive_type = GL_FALSE;
}
static void
_cogl_path_tesselator_combine (double coords[3],
void *vertex_data[4],
float weight[4],
void **out_data,
CoglPathTesselator *tess)
{
CoglPathTesselatorVertex *vertex;
CoglIndicesType new_indices_type;
int i;
/* Add a new vertex to the array */
g_array_set_size (tess->vertices, tess->vertices->len + 1);
vertex = &g_array_index (tess->vertices,
CoglPathTesselatorVertex,
tess->vertices->len - 1);
/* The data is just the index to the vertex */
*out_data = GINT_TO_POINTER (tess->vertices->len - 1);
/* Set the coordinates of the new vertex */
vertex->x = coords[0];
vertex->y = coords[1];
/* Generate the texture coordinates as the weighted average of the
four incoming coordinates */
vertex->s = 0.0f;
vertex->t = 0.0f;
for (i = 0; i < 4; i++)
{
CoglPathTesselatorVertex *old_vertex =
&g_array_index (tess->vertices, CoglPathTesselatorVertex,
GPOINTER_TO_INT (vertex_data[i]));
vertex->s += old_vertex->s * weight[i];
vertex->t += old_vertex->t * weight[i];
}
/* Check if we've reached the limit for the data type of our indices */
new_indices_type =
_cogl_path_tesselator_get_indices_type_for_size (tess->vertices->len);
if (new_indices_type != tess->indices_type)
{
CoglIndicesType old_indices_type = new_indices_type;
GArray *old_vertices = tess->indices;
/* Copy the indices to an array of the new type */
tess->indices_type = new_indices_type;
_cogl_path_tesselator_allocate_indices_array (tess);
switch (old_indices_type)
{
case COGL_INDICES_TYPE_UNSIGNED_BYTE:
for (i = 0; i < old_vertices->len; i++)
_cogl_path_tesselator_add_index (tess,
g_array_index (old_vertices,
uint8_t, i));
break;
case COGL_INDICES_TYPE_UNSIGNED_SHORT:
for (i = 0; i < old_vertices->len; i++)
_cogl_path_tesselator_add_index (tess,
g_array_index (old_vertices,
uint16_t, i));
break;
case COGL_INDICES_TYPE_UNSIGNED_INT:
for (i = 0; i < old_vertices->len; i++)
_cogl_path_tesselator_add_index (tess,
g_array_index (old_vertices,
uint32_t, i));
break;
}
g_array_free (old_vertices, TRUE);
}
}
static void
_cogl_path_build_fill_attribute_buffer (CoglPath *path)
{
CoglPathTesselator tess;
unsigned int path_start = 0;
CoglPathData *data = path->data;
int i;
/* If we've already got a vbo then we don't need to do anything */
if (data->fill_attribute_buffer)
return;
tess.primitive_type = FALSE;
/* Generate a vertex for each point on the path */
tess.vertices = g_array_new (FALSE, FALSE, sizeof (CoglPathTesselatorVertex));
g_array_set_size (tess.vertices, data->path_nodes->len);
for (i = 0; i < data->path_nodes->len; i++)
{
CoglPathNode *node =
&g_array_index (data->path_nodes, CoglPathNode, i);
CoglPathTesselatorVertex *vertex =
&g_array_index (tess.vertices, CoglPathTesselatorVertex, i);
vertex->x = node->x;
vertex->y = node->y;
/* Add texture coordinates so that a texture would be drawn to
fit the bounding box of the path and then cropped by the
path */
if (data->path_nodes_min.x == data->path_nodes_max.x)
vertex->s = 0.0f;
else
vertex->s = ((node->x - data->path_nodes_min.x)
/ (data->path_nodes_max.x - data->path_nodes_min.x));
if (data->path_nodes_min.y == data->path_nodes_max.y)
vertex->t = 0.0f;
else
vertex->t = ((node->y - data->path_nodes_min.y)
/ (data->path_nodes_max.y - data->path_nodes_min.y));
}
tess.indices_type =
_cogl_path_tesselator_get_indices_type_for_size (data->path_nodes->len);
_cogl_path_tesselator_allocate_indices_array (&tess);
tess.glu_tess = gluNewTess ();
if (data->fill_rule == COGL_PATH_FILL_RULE_EVEN_ODD)
gluTessProperty (tess.glu_tess, GLU_TESS_WINDING_RULE,
GLU_TESS_WINDING_ODD);
else
gluTessProperty (tess.glu_tess, GLU_TESS_WINDING_RULE,
GLU_TESS_WINDING_NONZERO);
/* All vertices are on the xy-plane */
gluTessNormal (tess.glu_tess, 0.0, 0.0, 1.0);
gluTessCallback (tess.glu_tess, GLU_TESS_BEGIN_DATA,
(GCallback) _cogl_path_tesselator_begin);
gluTessCallback (tess.glu_tess, GLU_TESS_VERTEX_DATA,
(GCallback) _cogl_path_tesselator_vertex);
gluTessCallback (tess.glu_tess, GLU_TESS_END_DATA,
(GCallback) _cogl_path_tesselator_end);
gluTessCallback (tess.glu_tess, GLU_TESS_COMBINE_DATA,
(GCallback) _cogl_path_tesselator_combine);
gluTessBeginPolygon (tess.glu_tess, &tess);
while (path_start < data->path_nodes->len)
{
CoglPathNode *node =
&g_array_index (data->path_nodes, CoglPathNode, path_start);
gluTessBeginContour (tess.glu_tess);
for (i = 0; i < node->path_size; i++)
{
double vertex[3] = { node[i].x, node[i].y, 0.0 };
gluTessVertex (tess.glu_tess, vertex,
GINT_TO_POINTER (i + path_start));
}
gluTessEndContour (tess.glu_tess);
path_start += node->path_size;
}
gluTessEndPolygon (tess.glu_tess);
gluDeleteTess (tess.glu_tess);
data->fill_attribute_buffer =
cogl_attribute_buffer_new (data->context,
sizeof (CoglPathTesselatorVertex) *
tess.vertices->len,
tess.vertices->data);
g_array_free (tess.vertices, TRUE);
data->fill_attributes[0] =
cogl_attribute_new (data->fill_attribute_buffer,
"cogl_position_in",
sizeof (CoglPathTesselatorVertex),
G_STRUCT_OFFSET (CoglPathTesselatorVertex, x),
2, /* n_components */
COGL_ATTRIBUTE_TYPE_FLOAT);
data->fill_attributes[1] =
cogl_attribute_new (data->fill_attribute_buffer,
"cogl_tex_coord0_in",
sizeof (CoglPathTesselatorVertex),
G_STRUCT_OFFSET (CoglPathTesselatorVertex, s),
2, /* n_components */
COGL_ATTRIBUTE_TYPE_FLOAT);
data->fill_vbo_indices = cogl_indices_new (data->context,
tess.indices_type,
tess.indices->data,
tess.indices->len);
data->fill_vbo_n_indices = tess.indices->len;
g_array_free (tess.indices, TRUE);
}
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
static CoglPrimitive *
_cogl_path_get_fill_primitive (CoglPath *path)
{
if (path->data->fill_primitive)
return path->data->fill_primitive;
_cogl_path_build_fill_attribute_buffer (path);
path->data->fill_primitive =
cogl_primitive_new_with_attributes (COGL_VERTICES_MODE_TRIANGLES,
path->data->fill_vbo_n_indices,
path->data->fill_attributes,
COGL_PATH_N_ATTRIBUTES);
cogl_primitive_set_indices (path->data->fill_primitive,
path->data->fill_vbo_indices,
path->data->fill_vbo_n_indices);
return path->data->fill_primitive;
}
static CoglClipStack *
_cogl_clip_stack_push_from_path (CoglClipStack *stack,
CoglPath *path,
CoglMatrixEntry *modelview_entry,
CoglMatrixEntry *projection_entry,
const float *viewport)
{
float x_1, y_1, x_2, y_2;
_cogl_path_get_bounds (path, &x_1, &y_1, &x_2, &y_2);
/* If the path is a simple rectangle then we can divert to pushing a
rectangle clip instead which usually won't involve the stencil
buffer */
if (_cogl_path_is_rectangle (path))
return _cogl_clip_stack_push_rectangle (stack,
x_1, y_1,
x_2, y_2,
modelview_entry,
projection_entry,
viewport);
else
{
CoglPrimitive *primitive = _cogl_path_get_fill_primitive (path);
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
return _cogl_clip_stack_push_primitive (stack,
primitive,
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
x_1, y_1, x_2, y_2,
modelview_entry,
projection_entry,
viewport);
}
}
void
cogl_framebuffer_push_path_clip (CoglFramebuffer *framebuffer,
CoglPath *path)
{
CoglMatrixEntry *modelview_entry =
_cogl_framebuffer_get_modelview_entry (framebuffer);
CoglMatrixEntry *projection_entry =
_cogl_framebuffer_get_projection_entry (framebuffer);
/* XXX: It would be nicer if we stored the private viewport as a
* vec4 so we could avoid this redundant copy. */
float viewport[] = {
framebuffer->viewport_x,
framebuffer->viewport_y,
framebuffer->viewport_width,
framebuffer->viewport_height
};
framebuffer->clip_stack =
_cogl_clip_stack_push_from_path (framebuffer->clip_stack,
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
path,
modelview_entry,
projection_entry,
viewport);
if (framebuffer->context->current_draw_buffer == framebuffer)
framebuffer->context->current_draw_buffer_changes |=
COGL_FRAMEBUFFER_STATE_CLIP;
}
static void
_cogl_path_build_stroke_attribute_buffer (CoglPath *path)
{
CoglPathData *data = path->data;
CoglBuffer *buffer;
unsigned int n_attributes = 0;
unsigned int path_start;
CoglPathNode *node;
floatVec2 *buffer_p;
unsigned int i;
/* If we've already got a cached vbo then we don't need to do anything */
if (data->stroke_attribute_buffer)
return;
data->stroke_attribute_buffer =
Allow propogation of OOM errors to apps This allows apps to catch out-of-memory errors when allocating textures. Textures can be pretty huge at times and so it's quite possible for an application to try and allocate more memory than is available. It's also very possible that the application can take some action in response to reduce memory pressure (such as freeing up texture caches perhaps) so we shouldn't just automatically abort like we do for trivial heap allocations. These public functions now take a CoglError argument so applications can catch out of memory errors: cogl_buffer_map cogl_buffer_map_range cogl_buffer_set_data cogl_framebuffer_read_pixels_into_bitmap cogl_pixel_buffer_new cogl_texture_new_from_data cogl_texture_new_from_bitmap Note: we've been quite conservative with how many apis we let throw OOM CoglErrors since we don't really want to put a burdon on developers to be checking for errors with every cogl api call. So long as there is some lower level api for apps to use that let them catch OOM errors for everything necessary that's enough and we don't have to make more convenient apis more awkward to use. The main focus is on bitmaps and texture allocations since they can be particularly large and prone to failing. A new cogl_attribute_buffer_new_with_size() function has been added in case developers need to catch OOM errors when allocating attribute buffers whereby they can first use _buffer_new_with_size() (which doesn't take a CoglError) followed by cogl_buffer_set_data() which will lazily allocate the buffer storage and report OOM errors. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit f7735e141ad537a253b02afa2a8238f96340b978) Note: since we can't break the API for Cogl 1.x then actually the main purpose of cherry picking this patch is to keep in-line with changes on the master branch so that we can easily cherry-pick patches. All the api changes relating stable apis released on the 1.12 branch have been reverted as part of cherry-picking this patch so this most just applies all the internal plumbing changes that enable us to correctly propagate OOM errors.
2012-11-08 12:54:10 -05:00
cogl_attribute_buffer_new_with_size (data->context,
data->path_nodes->len *
sizeof (floatVec2));
buffer = COGL_BUFFER (data->stroke_attribute_buffer);
buffer_p = _cogl_buffer_map_for_fill_or_fallback (buffer);
/* Copy the vertices in and count the number of sub paths. Each sub
path will form a separate attribute so we can paint the disjoint
line strips */
for (path_start = 0;
path_start < data->path_nodes->len;
path_start += node->path_size)
{
node = &g_array_index (data->path_nodes, CoglPathNode, path_start);
for (i = 0; i < node->path_size; i++)
{
buffer_p[path_start + i].x = node[i].x;
buffer_p[path_start + i].y = node[i].y;
}
n_attributes++;
}
_cogl_buffer_unmap_for_fill_or_fallback (buffer);
data->stroke_attributes = g_new (CoglAttribute *, n_attributes);
/* Now we can loop the sub paths again to create the attributes */
for (i = 0, path_start = 0;
path_start < data->path_nodes->len;
i++, path_start += node->path_size)
{
node = &g_array_index (data->path_nodes, CoglPathNode, path_start);
data->stroke_attributes[i] =
cogl_attribute_new (data->stroke_attribute_buffer,
"cogl_position_in",
sizeof (floatVec2),
path_start * sizeof (floatVec2),
2, /* n_components */
COGL_ATTRIBUTE_TYPE_FLOAT);
}
data->stroke_n_attributes = n_attributes;
}
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
void
cogl_framebuffer_fill_path (CoglFramebuffer *framebuffer,
CoglPipeline *pipeline,
CoglPath *path)
{
g_return_if_fail (cogl_is_framebuffer (framebuffer));
g_return_if_fail (cogl_is_pipeline (pipeline));
g_return_if_fail (cogl_is_path (path));
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
_cogl_path_fill_nodes (path, framebuffer, pipeline, 0 /* flags */);
}
void
cogl_framebuffer_stroke_path (CoglFramebuffer *framebuffer,
CoglPipeline *pipeline,
CoglPath *path)
{
g_return_if_fail (cogl_is_framebuffer (framebuffer));
g_return_if_fail (cogl_is_pipeline (pipeline));
g_return_if_fail (cogl_is_path (path));
Separate out CoglPath api into sub-library This splits out the cogl_path_ api into a separate cogl-path sub-library like cogl-pango and cogl-gst. This enables developers to build Cogl with this sub-library disabled if they don't need it which can be useful when its important to keep the size of an application and its dependencies down to a minimum. The functions cogl_framebuffer_{fill,stroke}_path have been renamed to cogl_path_{fill,stroke}. There were a few places in core cogl and cogl-gst that referenced the CoglPath api and these have been decoupled by using the CoglPrimitive api instead. In the case of cogl_framebuffer_push_path_clip() the core clip stack no longer accepts path clips directly but it's now possible to get a CoglPrimitive for the fill of a path and so the implementation of cogl_framebuffer_push_path_clip() now lives in cogl-path and works as a shim that first gets a CoglPrimitive and uses cogl_framebuffer_push_primitive_clip instead. We may want to consider renaming cogl_framebuffer_push_path_clip to put it in the cogl_path_ namespace. Reviewed-by: Neil Roberts <neil@linux.intel.com> (cherry picked from commit 8aadfd829239534fb4ec8255cdea813d698c5a3f) So as to avoid breaking the 1.x API or even the ABI since we are quite late in the 1.16 development cycle the patch was modified to build cogl-path as a noinst_LTLIBRARY before building cogl and link the code directly into libcogl.so as it was previously. This way we can wait until the start of the 1.18 cycle before splitting the code into a separate libcogl-path.so. This also adds shims for cogl_framebuffer_fill/stroke_path() to avoid breaking the 1.x API/ABI.
2013-04-27 22:22:24 -04:00
_cogl_path_stroke_nodes (path, framebuffer, pipeline);
}