When adapting the check to the new versioning check, we just blindly
copied the old behavior for stable/unstable versions:
- stable releases must have matching major numbers
- unstable releases must match major and minor ("alpha", "beta", "rc")
That worked for the old even/odd scheme, but now has the absurd effect
that we consider an extension that lists "40.alpha" in its shell-version
incompatible with "40.beta", but compatible with "40.2".
At least this provides us with a good opportunity to reconsider the
behavior. While it is true that breakage is much more likely between
unstable releases, in practice extensions are either following shell
development closely or update once around the time of a stable release.
For the former, the stricter check isn't usually too useful (as the
extension releases around the same time as gnome-shell anyway).
For the latter, it's annoying that ".rc" is treated differently from
".0" and requires an update to become compatible.
The latter is also by far the more common case, so update the check
to only match on the major version regardless of whether a release
is stable or unstable.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3787
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1719>
This ports the runDialog changes of [1] to the underlying history
component, where they can benefit looking glass as well: the history is
now responsible for trimming the input and deciding that it shouldn’t be
stored if empty. (Note that _setPrevItem and _setNextItem already
skipped updating the history if the entry was empty.)
Since both users, runDialog and lookingGlass, also need the trimmed
input for other reasons – runDialog to avoid issues when interpreting
the command as a file path (if it can’t be executed as a command),
lookingGlass to decide whether a command should be run at all – have
addItem return the trimmed input. (runDialog and lookingGlass are not
yet changed to take advantage of this – that will be done in separate
commits.)
[1]: https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1442
Part-of: <https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1653>
gjs improved its default property getter/setters, and as a result it
is no longer possible to set read-only properties.
Add proper getters (backed by private properties) to fix the resulting
errors.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3203
With the new versioning scheme, the previously-minor version gets
shifted up to major, and unstable releases are marked by non-numeric
"versions" rather than uneven numbers. Reflect that in the extension
version check.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1456
We split the search string into words using whitespace, while
GLib.tokenize_and_fold() splits on any non-alphanumeric characters.
That is, a valid search term like ',' will be tokenized as [], so
the original non-empty terms may get mapped to an empty array.
And as [].every() returns true for any condition[0], we end up
matching *all* system actions in that case. We want the exact
opposite and not return any results, so handle that case explicitly.
[0] https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/everyhttps://gitlab.gnome.org/GNOME/gnome-shell/-/issues/3169
Move the screencasting into a separate D-Bus service process, using
PipeWire instead of Clutter API. The service is implemented in
Javascript using the dbusService.js helper, and implements the same API
as was done by screencast.js and the corresponding C code.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1372
Changing the icon to 'system-log-out-symbolic' has no visual
change in a default GNOME setup since both 'system-log-out-symbolic'
and 'application-exit-symbolic' are the same in adwaita-icon-theme
(at the time of writing), however, other icon themes differentiate
between the two icons so pointing to the appropriate icon name
is the right thing to do.
https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/2751
Commit 764527c8c9 not only ports this file
to Promises but also changes the behavior of _initPanelService method.
Instead of always calling _updateReadiness when _panelService is ready,
it only calls it when get_global_engine_async succeeds.
The only callers of _updateReadiness are _initEngines and
_initPanelService. Assume that _initEngines completes first. Its
_updateReadiness call keeps _ready as false and it is expected for
_initPanelService to change it to true. However, since
get_global_engine_async fails because there is no active engine,
_initPanelService never calls _updateReadiness. Therefore, all setEngine
calls do nothing because _ready is false, and the input method panel
never shows. Users are unable to use any input method even if they can
see that ibus-daemon is already running.
Fix the issue by changing it back to the old behavior.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1235
Filter the apps shown on the desktop and in search results according to
whether they are blacklisted by the user’s parental controls.
This supports dynamically updating the filter during the user’s session.
This adds an optional dependency on libmalcontent. If that’s unavailable, no
parental controls filtering will occur.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/465
Promises make asynchronous operations easier to manage, in particular
when used through the async/await syntax that allows for asynchronous
code to closely resemble synchronous one.
gjs has included a Gio._promisify() helper for a while now, which
monkey-patches methods that follow GIO's async pattern to return a
Promise when called without a callback argument.
Use that to get rid of all those GAsyncReadyCallbacks!
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1126
The offset argument is changing from uint to int. Which means we
might would pass a negative offset and trigger an "out of bounds"
error. Make it work more or less alright with older mutters, by
clamping the offset to 0.
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1146
Forward the arguments at the 'delete-surrounding-text' signal
from IBusInputContext to clutter_input_method_delete_surrounding()
so that ibus-typing-booster use the deleting surrounding text function.
Input method engines can delete the output text in applications
with this function.
This change will require a change of mutter of mutter!517
because the first arguemnt of the 'delete-surrounding-text' is INT
to express the offset of the current cursor position but
the first one of clutter_input_method_delete_surrounding() is UINT
since the Wayland spec accepts UINT in delete_surrounding()
mutter will change the type of the first one to INT in
clutter_input_method_delete_surrounding() to work with this change.
https://gitlab.gnome.org/GNOME/mutter/issues/539https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/477
libnm doesn't only search for plugins in the regular VPN plugin directory,
but also in the legacy location and the directory pointed to by the
NM_VPN_PLUGIN_DIR environment variable (if set).
We don't monitor the additional directories, so it's possible for our cache
to become outdated.
Instead of trying to play catch-up with libnm's internals, do what nm-applet
does and use the appropriate API to look up the plugin on each request.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2386
The SignalQuality property is defined on the GDBusProxy, not the modem
JS object.
Fix this runtime warning:
JS WARNING: [resource:///org/gnome/shell/misc/modemManager.js 252]: reference to undefined property "SignalQuality"
JS ERROR: TypeError: this.SignalQuality is undefined
_reloadSignalQuality@resource:///org/gnome/shell/misc/modemManager.js:252:34
_init@resource:///org/gnome/shell/misc/modemManager.js:234:14
NMDeviceModem@resource:///org/gnome/shell/ui/status/network.js:517:34
_deviceAdded@resource:///org/gnome/shell/ui/status/network.js:1755:27
https://gitlab.gnome.org/GNOME/gnome-shell/-/merge_requests/1097
This (mistakenly) now only depends on signals triggered on Wayland
sessions. Hardcoding the XIM support on X11 sessions will make input
in some clients work again.
Closes: https://gitlab.gnome.org/GNOME/gnome-shell/issues/1690
repeatCount and autoReverse don't play well with animations disabled:
They cause password entries to wiggle themselves off-screen (by ending
up with some off-scale translation-x value).
While we should handle this more gracefully in the transition helpers,
it also makes sense to handle the case directly in wiggle(): As it
uses a chain of three transitions, we would still end up with a crude
one-frame-per-transition wiggle "animation".
Instead, do no animation at all as you would expect when animations are
disabled.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/2236
While the gsetting is available for all who needs it, the Shell might
override it given various hueristics. Expose the decision made by the
Shell via a new property.
Intended to be used by gsd-xsettings as well as xdg-desktop-portal-gtk.
This also add a version property to the API, so that semi external
services (xdg-desktop-portal-gtk) can detect what API is expected to be
present.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/757
xgettext gained some support for template strings, and no longer
fails when encountering '/' somewhere between backticks.
Unfortunately its support is still buggy as hell, and it is now
silently dropping translatable strings, yay. I hate making the
code worse, but until xgettext really gets its shit together,
the only viable way forward seems to be to not use template
strings in any files listed in POTFILES.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/1014
Since the wiggle effect will be used by the redesigned prompt-dialogs
and we always want to use the same parameters, move those as defaults
for the wiggle function to the util.js file.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/942
The current support for extension updates is half-baked at best.
We are about to change that, and implement offline updates similar
to gnome-software.
As a first step, add a hasUpdate property to the extension state
which will communicate available updates.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/945
Since the orientation lock menu entry is a proper menu entry instead of
a icon-only button now, we also show a description-text for that entry,
so update this text depending on whether orientation is locked or not to
better reflect what clicking the menu entry will do.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/964
Since commit 87e60ed97843, geoclue no longer pretends that authorization
is useful for system-installed apps (as they can easily lie about their
ID). Unfortunately this broke our auto-location support in case Weather
is installed non-sandboxed, as we are waiting for an authorization that
will never happen.
Unbreak it by only requiring authorization when installed as Flatpak.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1823
It is true that delete is a javascript keyword, but that doesn't
prevent it from being used as method name - there are event built-in
types like Map or Set with delete() methods!
So if that hack was ever needed, this hasn't been the case for years
now; just removed the hack now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/862
The whitelist is a list of well-known D-Bus names, which we then search
for the unique name we get from the method invocation - unsuccesfully.
Fix this by watching the bus for any name in the whitelist in order
to maintain a map from wel-known to unique name that we can use for
matching.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1916
If the clock is set to 12h, the AM/PM in the weather forecast times
should be clear from the context, because they are the immediately
following hours. This makes it less likely that the times will be
ellipsized (in which case the AM/PM wouldn't be shown anyway.)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/835
Since ES5, trailing commas in arrays and object literals are valid.
We generally haven't used them so far, but they are actually a good
idea, as they make additions and removals in diffs much cleaner.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
ES6 allows to omit property names where they match the name of the
assigned variable, which makes code less redunant and thus cleaner.
We will soon enforce that in our eslint rules, so make sure we use
the shorthand wherever possible.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
Nesting functions can be helpful for private helper functions, but
here they are accessing some variables from the outer scope and
shadowing others. Split them out to avoid any ambiguity.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/805
Use GObject based objects for ModemGsm, ModemCdma and BroadbandModem.
This allows to define a base class that we can use to natively define
properties and notify property changes.
We can now remove the "fake" notify signals with proper properties
notifications.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/563
In the xwayland-on-demand scenario, it may happen that Xwayland is
shutdown (causing a restart of ibus-daemon to drop ibus-x11) while
we are typing.
If we have a bit of bad luck, this will cause the IBusInputContext
to be disposed (due to its bus "closing") at a time when we have
an ibus_input_context_process_key_event_async() request on the fly.
As the object is disposed in between this would tickle JS (rightfully
complaining that it's been disposed under its feet) and make us pass
an actually NULL IBusInputContext to the corresponding _finish()
function (despite the IBusInputContext being still held alive by some
other refs). This will assert and abort in
ibus_input_context_process_key_event_async_finish() then.
To handle this, listen for IBusInputContext::destroy, and reset our
internal state, this way we can compare on the JS side that the
IBusInputContext is indeed an up-to-date one.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/813
xgettext got better at recognizing template strings, so we can
replace more string concatenations. Alas xgettext is still buggy
(surprise, regular expressions are hard), so there are still a
handful of holdouts that prevent us from making a complete switch.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/792
The shell tries to spawn the ibus daemon on startup if unavailable, however
as per commit 8adfc5b1 we also force restarting it once the X11 server is
available.
Unfortunately this could cause a race if we disconnect while we were already
connected to an ibus daemon, but still in the process of going through the
various nested calls.
In fact the ::disconnect callback didn't stop any further async ibus call
that, even if failing, would have eventually triggered the emission of a
'ready' signal and to the Keyboard's callback, leading under X11 to a full
grab owned by ibus daemon.
In order to avoid this and keep control of the calls order, use in both
IbusManager and InputMethod a cancellable that is setup before connecting to
the bus, and that is cancelled on disconnection.
Then handle the finish() calls properly, using try/catch to validate the
returned value, taking in account the potential error and just not
proceeding in case of cancellation.
Fixes https://gitlab.gnome.org/GNOME/gnome-shell/issues/1712
gnome-shell calls ibus_input_context_focus_in() in InputMethod.focus_in()
but the event is not actually forwarded to panels and engines in GNOME
Wayland because gnome-shell changes IBus.Capabilite by focus events and
disables IBus.Capabilite.FOCUS when ibus_input_context_focus_in() is called.
IBus.Capabilite is assumed a fixed value per input context in the
first place and it should not be changed by focus events.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/573
As arrow functions have an implicit return value, an assignment of
this.foo = bar could have been intended as a this.foo === bar
comparison. To catch those errors, we will disallow these kinds
of assignments unless they are marked explicitly by an extra pair
of parentheses.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/731
We are currently inconsistent whether to put the operators in front
of the corresponding line or at the end of the preceding one. The
most dominant style for now is to put condition and first branch on
the same line, and then align the second branch:
let foo = condition ? fooValue
: notFooValue;
Unfortunately that's a style that eslint doesn't support, so to account
for it, our legacy configuration currently plainly ignores all indentation
in conditionals.
In order to drop that exception and not let messed up indentation slip
through, change all ternary operators to the non-legacy style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/725
We now do 2 things along Xwayland startup/shutdown:
- Start or stop the gnome-session-x11-services target, that will
pull all X11 related services that the session might depend on.
- As we start ibus-daemon manually, trigger a restart in order to
toggle the XIM daemon on and off along with Xwayland presence.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
We may need to restart it with different arguments, so make it
possible to do that. Also, avoid to just restart it on _clear(),
this is now most likely through our --replace call than it is
through ibus-daemon eg. dying, avoids some noise in logs as
there is already an ongoing ibus-daemon.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/680
When plugging in a device with sensors that are unsupported by
iio-sensor-proxy, the proxy may quit so fast that the name disappears
from the bus before we get to construct the SensorProxy in response
to the name-appeared handler, resulting in the following warning:
JS ERROR: TypeError: this._sensorProxy is null
_sensorProxyAppeared/this._sensorProxy<@resource:///org/gnome/shell/misc/systemActions.js:217:17
_makeProxyWrapper/</<@resource:///org/gnome/gjs/modules/overrides/Gio.js:243:21
Address this by creating the proxy unconditionally instead of monitoring
the bus name, and using the g-name-owner property to determine whether
iio-sensor-proxy is active.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1357
GDBusProxy::g-properties-changed is also emitted when the name drops from
the bus, at which point any properties will be null. That's not a valid
gsettings value, so to avoid the corresponding warning, move the g-name-owner
check accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
The different units - seconds for Tweener and milliseconds for
timeouts - are not a big issue currently, as there is little
overlap. However this will change when we start using Clutter's
own animation framework (which uses milliseconds as well), in
particular where constants are shared between modules.
In order to prepare for the transition, define all animation times
as milliseconds and adjust them when passing them to Tweener.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/663
Our current Weather integration depends on poking around the app's
settings, which we cannot do when the app is sandboxed (as its
filesystem is "hidden away" in a container in that case).
So instead, use our own GSettings schema for the settings, and sync
it with GNOME Weather via a custom D-Bus interface.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1158
For GObject properties, we follow the convention of all-lowercase,
dash-separated names. Those translate to underscores in getters/setters,
so exempt them from the newly added "camelcase" rule.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
While we aren't using those destructured variables, they are still useful
to document the meaning of those elements. We don't want eslint to keep
warning about them though, so mark them accordingly.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Those unused arguments aren't bugs - unbeknownst to eslint, they all
correspond to valid signal parameters - but they don't contribute
anything to clarity, so just remove them anyway.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/627
Now that extension loading and the extensions map are no longer shared
between the gnome-shell and gnome-shell-extension-prefs processes, we
can move both into the ExtensionManager which makes much more sense
conceptually.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Whether or not an extension can be enabled/disabled depends on various
factors: Whether the extension is in error state, whether user extensions
are disabled and whether the underlying GSettings keys are writable.
This is complex enough to share the logic, so add it to the extension
properties that are exposed over D-Bus.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
Serializing an extension for sending over D-Bus is currently done by the
appropriate D-Bus method implementations. Split out the code as utility
function and add a corresponding deserialization function, which we will
soon use when consuming the D-Bus extension API from the extension-prefs
tool.
https://bugzilla.gnome.org/show_bug.cgi?id=789852
It makes sense to keep extension-related enums in the same module instead
of spreading them between ExtensionSystem and ExtensionUtils.
More importantly, this will make the type available to the extensions-prefs
tool (which runs in a different process and therefore only has access to
a limited set of modules).
https://bugzilla.gnome.org/show_bug.cgi?id=789852
The first parameter to Object.assign() is the same target object that
will be returned. That is, since commit 46874eed0 Params.parse() modifies
the @defaults object. Usually we pass that parameter as an object literal
and this isn't an issue, but the change breaks spectacularly in the few
cases where we use a re-usable variable.
Restore the previous behavior by copying the object first.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/615
Standard javascript now has Object.assign() which is very similar to
Params.parse(), except that the latter by default disallows "extra"
parameters. We can still leverage the standard API by simply
implementing the error check, and then call out to Object.assign()
for the actual parameter merging.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/612
Braces are optional for single-line arrow functions, but there's a
subtle difference:
Without braces, the expression is implicitly used as return value; with
braces, the function returns nothing unless there's an explicit return.
We currently reflect that in our style by only omitting braces when the
function is expected to have a return value, but that's not very obvious,
not an important differentiation to make, and not easy to express in an
automatic rule.
So just omit braces consistently as mandated by gjs' coding style.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
While we have some style inconsistencies - mostly regarding split lines,
i.e. aligning to the first arguments vs. a four-space indent - there are
a couple of places where the spacing is simply wrong. Fix those.
Spotted by eslint.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent on whether case labels share the same
indentation level as the corresponding switch statement or not. gjs
goes with the default of no additional indentation, so go along with
that.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
Starting an object literal with a comment throws off eslint's rules
for brace style (newline between brace and properties for both opening
and closing brace or neither) as well as indentation (fixed four-space
indent or align with the previous argument).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/608
We are currently inconsistent with whether or not to put a space
after catch clauses. While the predominant style is to omit it,
that's inconsistent with the style we use for any other statement.
There's not really a good reason to stick with it, so switch to
the style gjs/eslint default to.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/607
We can use that newer method where we don't care about the actual position
of an element inside the array.
(Array.includes() and Array.indexOf() do behave differently in edge cases,
for example in the handling of NaN, but those don't matter to us)
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/152
Upon construction of the CDMA modem proxy, _reloadCdmaOperatorName()
is called and the value of the Sid property is read.
That property is defined as UINT32 in the D-Bus interface, but the
value may not be loaded yet after the proxy is constructed, in which
case its value will be null.
In _findProviderForSid(), we'll end up calling lookup_cdma_sid(null)
which fails with the following assertion:
gnome-shell[1082]: nma_mobile_providers_database_lookup_cdma_sid: assertion 'sid > 0' failed
This commit changes the (sid == 0) check in _findProviderForSid()
to (!sid) which will also catch the null case.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/555
App IDs in gnome-shell don't match AppStream, Flatpak or Snap IDs. For the
desktop portal, the latter two are more relevant, so include it in the
returned information.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1289
Our search for system actions is currently inconsistent with searching
for applications: While we match terms anywhere within keywords, GIO
will only match at the beginning of words.
In order to get the same behavior, split keywords into single words
and only match terms at the beginning of a word.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/745
Our weather integration is supposed to follow GNOME Weather's settings,
including its permission to use location services. However there's a
discrepancy in case xdg-desktop-portal is unavailable:
While our geoclue agent grants all applications access to location
services in that case, the weather integration treats it as if
access was denied.
Fix this by handling this case explicitly.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/1130
Those functions originated in gnome-shell-extension's Convenience
module which is copied by almost every extension out there. Let's
make people's life just a little bit easier by including the code
ourselves.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/150
ES6 finally adds standard class syntax to the language, so we can
replace our custom Lang.Class framework with the new syntax. Any
classes that inherit from GObject will need special treatment,
so limit the port to regular javascript classes for now.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/361
When `ibus restart` runs, InputMethod.enabled is changed to false
and no longer enable ibus but 'enabled' and 'disabled' signals
are not used in the current IBus clients and it's good to delete
the member simply.
https://gitlab.gnome.org/GNOME/gnome-shell/issues/295
The `GetWindows` method gives access to the list of windows for each
application with some of their properties, so utilities such as dogtail
can pick the window of their choice to interfere with using the provided
window id.
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
Add a D-Bus API that allows the API user to introspect the application
state of the shell. Currently the only exposed information is list of
running applications and which one is active (i.e. has focus).
https://gitlab.gnome.org/GNOME/gnome-shell/merge_requests/326
