CtrlAltTabPopup was using a St.BoxLayout and relied on anchor_gravity
center for positioning. This does not guarantee correct pixel alignment,
so use a St.GenericContainer instead and do the positioning similar to
that of the appSwitcher.
https://bugzilla.gnome.org/show_bug.cgi?id=643820
Make GSettings support optional, refactor text entry handling,
fix some off-by-one bugs in the management itself, use Params
for parsing, fix other typos and bugs.
https://bugzilla.gnome.org/show_bug.cgi?id=642793
Currently the icon texture is only updated on style changes when
the icon size is set from CSS and differs from the previously used
icon size.
As the style change may have been triggered by an icon theme change,
textures that are created for themed icons should always be recreated;
given that this is the case for most uses (with the exception of
file thumbnails), recreate the icon texture unconditionally to avoid
complexity.
https://bugzilla.gnome.org/show_bug.cgi?id=643738
Commit b1654af406 moved the panel positioning (and thus that of its
corners) before the panel startup animation. As the panel corners now
are mapped while the panel animation is active, the initial style-changed
signal which triggers another repositioning is received after the
initial layout and the corners end up at wrong positions.
To fix, animate the corner positions as well during the startup
animation - if anyone could actually see the animation, the corners
should animate with the panel anyway ...
https://bugzilla.gnome.org/show_bug.cgi?id=643804
Mutter really expects this, as this is how app-specified struts
happen. For instance, if the primary display is beside a taller
screen and is not positioned at the top, then we extend the struts
for the panel with the size of the unused area above the primary
monitor.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
Right now we require a strut to be as wide as the full screen to
create a TOP strut. This means that in a multi-monitor scenario (at
least if the primary monitor is leftmost) we will make the panel strut
be Meta.Side.LEFT due to the random side picking for corner objects.
This changes the width/height comparison to the primary monitor rather
than the screen to get this right. Also adds some docs about how
struts work in a multi-monitor situation.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
We need to do the initial relayout before we start up the startup
animation, and the startup animation can't hardcode the position
of the panel to zero.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
1. disconnect destroy signals in popModal (actors can have great lifetime and then pushed again)
2. incorrect pushModal/popModal pair in overview
https://bugzilla.gnome.org/show_bug.cgi?id=64078
Increase the icon size of search results for consistency with the
application view. To account for the larger icons, only display
a single row of results per section.
https://bugzilla.gnome.org/show_bug.cgi?id=643632
Search results' meta info currently is expected to have an 'icon'
property holding a Clutter.Texture of a fixed icon size. This
property is used to implement the createIcon() function of BaseIcon,
which is used to actually display the result, ignoring the size
parameter due to the fixed icon size.
Given that all available search providers create this property for
the desired icon size using a function with the same signature, it
appears logical to replace the fixed-sized 'icon' property with
such a function, so that the icon size will be defined by the display
actor rather than the search system.
https://bugzilla.gnome.org/show_bug.cgi?id=643632
Currently section headers in the search view are reactive and run
the corresponding provider's expandSearch() function when clicked,
which should launch an external program displaying all search
results for the section. Unfortunately it is only implemented for
the "Settings" provider, and does not work properly (as it ignores
the search and just launches System Settings).
Also current mockups deemphasize the section header, making the
feature pretty much indiscoverable (except by accident when
interfering with swipe-scrolling).
In conclusion, the feature does not make much sense in its current
form, so remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=643632
Currently the total number of matches for a particular section is
displayed on the left of the section's header. While it made sense
in the old layout where it was close to the section's title, it is
now rather disconnected, and has been removed in current mockups.
https://bugzilla.gnome.org/show_bug.cgi?id=643632
When UPower has not yet collected enough data to calculate a time
to discharge, it will report 0 minutes. Show "Estimating..." in
that case instead.
https://bugzilla.gnome.org/show_bug.cgi?id=642753
Currently we remove a workspace when last window on that workspace closes,
which turned out to be too agressive as some apps open either a splashscreen
or a "I have crashed last time" dialog at startup.
Try to detect such apps and give them a chance to open their "real window(s)"
on the workspace.
https://bugzilla.gnome.org/show_bug.cgi?id=642188
_ungrabActor disconnects the event signal handler but does not
check whether it is connected before doing so which can result into
an exception like:
JS ERROR: !!! Exception was: Error: disconnect() takes one arg, the signal handler id
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = 'gjs_throw'
JS ERROR: !!! stack = 'Error("disconnect() takes one arg, the signal handler id")@:0
Unfortunately the evolution-data-server client-side libraries seem to
block the calling thread. This is a major problem as we must never
ever block the main thread (doing so causes animations to flicker
etc.). In the worst case, this problem causes login to hang (without
falling back to fall-back mode) and in the best case it slows down
login until a network connection is acquired.
Additionally, in order to sanely use these evolution-data-server
libraries, GConf has to be involved and GConf is not thread-safe. So
it's not really feasible just moving the code to a separate
thread. Therefore, move all calendar IO out of process and use a
simple (and private) D-Bus interface for the shell to communicate with
the out-of-process helper.
For simplification, remove existing in-process code since internal
interfaces have been slightly revised. This means that the shell is no
longer using any native code for drawing the calendar dropdown.
https://bugzilla.gnome.org/show_bug.cgi?id=641396
Signed-off-by: David Zeuthen <davidz@redhat.com>
See commit f2158218bef0c51 in mutter. Basically, we need
to grab org.freedesktop.Notifications before anything else
in the session gets started.
Note: I intentionally removed the Util.killall bits. I believe that
for notification-daemon at least, if we specify
DBUS_NAME_FLAG_REPLACE_EXISTING, we'll take over the name. Not sure
about notify-osd; if that's still a problem, then what we need to do
is add killing (and possibly respawning) of notify-osd to
"gnome-shell --replace", and not have it embedded randomly in a JS file.
https://bugzilla.gnome.org/show_bug.cgi?id=642666
The DBus JS binding will complain if the signature of a method
or of a signal is undefined, so we need to define it even if it
is an empty string, and we need to use the correct property name
for signals.
https://bugzilla.gnome.org/show_bug.cgi?id=643374
For applications with no proper desktop file, the window icon is
used as application icon in the tab switcher, but it won't have
the correct icon size. The current approach is to add additional
padding to these icons - the size turns out inconsistent with
other icons, but the icon appears sharp. For the dash it has been
decided that unsharp icons are less evil than differing icon sizes,
so icons are scaled up to the "right" size - for consistency, do the
same in the alt-tab switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=643300
Mainly due to StTextureCache's way of handling fallback icons, an
implementation of BaseIcon.createIcon() may return an icon smaller
than the requested size. Given that BaseIcon is not used for isolated
elements, but rather for groups of related items (App view, Dash,
Search Results, ...), having some elements end up with the wrong
size is more annoying than having some elements end up ugly due to
scaling, so explicitly enforce the requested icon size.
https://bugzilla.gnome.org/show_bug.cgi?id=642043
As gnome-shell now switched to use the menu file from gnome-menus,
we no longer have direct control over category names. If such a name
contains unescaped markup, the shell will crash when trying to create
the filter label, so make sure to escape markup in category names.
Fix a typo in panel.js, and ensure that all variables used in
functions are scoped to the block (using let), to avoid polluting
the global namespace.
https://bugzilla.gnome.org/show_bug.cgi?id=643210
Rather than connecting to stage::capture-event and then trying to
guess whether or not a given key-press should be handled by us or not,
handle the end-search-on-Escape case from entry::key-press-event
(since it only makes sense when the entry is focused anyway) and the
start-search-on-printable-key case from stage::key-press-event (which
will only get the events that no other actor wanted for itself).
Similarly, do exit-overview-on-Escape and switch-panes cases from
stage::key-press-event, rather than
viewSelector.actor::key-press-event, so that they will work correctly
even if the keyboard focus is somewhere else. (Also fix a longstanding
bug in the pane-switching code, which was supposed to be disabled when
a search was active, but was checking a non-existent variable.)
https://bugzilla.gnome.org/show_bug.cgi?id=642502
The search entry was taking a sort of grab when it was in the
focused-but-empty state, and would eat up most events for other actors
(except, confusingly, for panel actors). The only bit of "modality" we
really need here is that the entry is supposed to go back to the
unfocused state if you click somewhere outside it when it was in the
focused-but-empty state. So do that.
https://bugzilla.gnome.org/show_bug.cgi?id=642502
The division of labor between the two was quite muddled. Rather than
try to invent a clean distinction of what belongs where, just merge
them together.
https://bugzilla.gnome.org/show_bug.cgi?id=642502
When the user cancels the drag while hovering over a window the timeout
handler will throw an exception because the drag actor will be destroyed
at this point.
Fix that by removing the timeout in _onDragEnd.
The xdnd timestamp gets updated on every xdnd-position event,
so while waiting for the window timeout to fire we need to make sure we
update the timestamp when getting on motion to activate the window
with the correct timestamp.
Commit 259c84ed9a refactored out HotCorner into its own class
and added this line and a variable, but it was left behind
when the variable disappeared in commit 7cf311dac0.
See https://bugs.freedesktop.org/show_bug.cgi?id=27788#c1 for details
about the problem this patch is solving
In particular, we should never bring up the dialog if there is no
password on the account. While this sounds like a weird corner case,
it's not.. the Live CD, for example, does not have a root password.
This also avoids the initial dialog resize.. before the patch the
authentication dialog appears and a split-second later an StEntry
widget is added.
Also print out more diagnostic information if showing the modal dialog
fails. Also add a comment about how to easily make this happen.
Signed-off-by: David Zeuthen <davidz@redhat.com>
Currently the panel is positioned from main.js, move that code into
a method in panel.js instead and call it from main.js, which is
consistent with what we do for the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=643064
This is required since we can have chrome on multiple monitors (due to
per-monitor hot-corners).
Windows are primary associated with the monitor that their center is on.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
This is needed so that we can have several instances, one per
monitor.
This also makes the hot corner environments a container which
contains the corner.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
In the mockups the bottom border of active panel buttons is drawn
on top of the panel's border. To get this effect, move the panel
border into the background, so that it is not subtracted from the
vertical space given to the buttons. Adjust the drawing of the rounded
corners to reflect that change.
https://bugzilla.gnome.org/show_bug.cgi?id=643001
This allows PolicyKit applications to disambiguate between when the
authentication dialog is dismissed versus when authentication fails
(e.g. the wrong password has been entered).
See https://bugs.freedesktop.org/show_bug.cgi?id=30653 for more
information.
Signed-off-by: David Zeuthen <davidz@redhat.com>
We never get enter events anyway due to the menu code, and if
the user clicks on a non-menu the menu is removed and ungrabbed
before the target actor gets the event anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=642881
Currently the menu has a hardcoded width which result into the hover
effect of the "Open Calendar" item being "cut off" in the middle rather
then reaching to the edge.
To be consistent with other menu items, make it expand to fill the available
space.
This is special menu item that can alternate
between two choices when you hit the alt key.
It will be useful for getting a hybrid
suspend/power off menu item.
https://bugzilla.gnome.org/show_bug.cgi?id=636680
PopupMenuManager relies on menus being added in the order of the
menu buttons they are attached to, so defer adding the user status
menu until the status icon menus have been added to make the manager
happy.
This patch modifies MessageTray behaviour so that normal (not urgent)
notifications are not shown when the user is Busy (they're sent
immediately to the Summary area). When status is then changed,
notifications still pending are shown again.
Additionally, when status is modified from Idle to anything other than
Busy, the message tray is forced open for 4 seconds, so that summary
icons are visible.
https://bugzilla.gnome.org/show_bug.cgi?id=617225
A PolicyKit Authentication Agent is a construct used to authenticate
one or more identities. See the PolicyKit documentation for more
details on authentication agents and how PolicyKit works:
http://hal.freedesktop.org/docs/polkit/
Since gjs does not support subclassing a GObject class from Javascript
code, we bring in a native class to bridge the VFuncs to GObject
signals. Additionally, this native class also queues up authentication
requests so the user of the native class only has to deal with a
single outstanding request at any one time.
The file js/ui/polkitAuthenticationAgent.js introduces a singleton
that listens for authentication requests via the native class. This
singleton uses the PolkitAgent machinery to do the actual heavy-weight
lifting required for authentication (essentially a PAM conversation).
We currently don't allow the user to pick the identity to be
authenticated.
https://bugzilla.gnome.org/show_bug.cgi?id=642886
Signed-off-by: David Zeuthen <davidz@redhat.com>
Complex popup menus require the ability to manager sequences of items
as "sections", to which you can add and and remove items, as well
as hide and show.
PopupMenuSection does exactly that, leveraging the existing machinery
for submenus, but without being exposed as a submenu to the user.
Also, make getMenuItems() private, since it is used for different things
now and may change semantics in the future.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
Make all subclasses of PopupMenuBase accept a params argument, which
can be used to make the item non reactive, not responsive to hover
and, as a new feature, with a different style class.
https://bugzilla.gnome.org/show_bug.cgi?id=621707
If the Shell is started with HighContrast enabled, it will never
see another value for the GSettings keys. In that case, we just
reset to the default.
https://bugzilla.gnome.org/show_bug.cgi?id=642641
We need the view selector to extend all the way to the right edge of the
monitor, so size and position the view selector in a way that the sum of
its X position and its width add up to the primary monitor width.
https://bugzilla.gnome.org/show_bug.cgi?id=642834
So far transitions do not work for the custom drawn corners, so to
avoid a visible glitch when transitioning a button in the panel corner
while updating the style of the apparently attached corner instantly,
remove transition of those panel buttons until we make it work for the
custom drawn parts as well.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
Current mockups show the panel curving downwards at the edges to
frame the work area and look awesome. Implement those as separate
actors to not affect the struts set by the panel, and synchronize
their state with the corresponding panel buttons so they blend in
with the panel. It might be worth considering whether the corners
should be hidden with maximized windows on the current workspace,
though this might affect the illusion of them being part of the
panel. As the corners don't affect the input region, the small
overlap with windows might not be too bad after all.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
The groups at the panel sides use different left/right padding, so
a slightly different CSS is required for RTL locales. Add :rtl
pseudo classes as necessary and adjust the CSS.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
We now use a border image on active panel buttons to underline the
button's content. As the property does not affect the content's
allocation, the app icon ends up being drawn on top of the border
image. To prevent this, use a custom property to clip the bottom of
the app icon when the button is active.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
While related to the status area, the user status button is clearly
not a status icon, and it does not make too much sense in
startStatusArea(), which is about filling the status area with
icons. Also, the status icon container is added to the panel in
the constructor, in fact, the user status button is the only "toplevel"
panel element which is initialized elsewhere. Not a crucial change,
but makes for a nice read anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=642697
When we are dragging a window over its current workspace or workspace
thumbnail, we show show "no drop possible" feedback instead
of "move here" feedback.
https://bugzilla.gnome.org/show_bug.cgi?id=642329
We don't necessarily get a syncStacking call when an actor is added
at the top of the workspace, so make sure to set the stackAbove value
for it correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=642329
'Search your computer' is problematic for various reasons:
- it specifies the kind of device
- it focuses on local search (while we also do web search)
- it does not advertise the instant search functionality
Change the hint text to 'Type to search' as proposed by Allan Day.
https://bugzilla.gnome.org/show_bug.cgi?id=642287
This starts saving lookingGlass history in gsettings, and also adds
the ability to clear the text field by pressing 'down' on the last
entry, like the run dialog and readline allow.
https://bugzilla.gnome.org/show_bug.cgi?id=642237
We try to position the boxpointer centered above the calendar,
which swaps position with the events list when using a RTL locale,
so make the menu alignment dependent on the text direction.
https://bugzilla.gnome.org/show_bug.cgi?id=642721
As the dash uses different widths and radii for left and right
borders, we need to use different CSS when it is positioned at
the right of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=642721
- When tweening a workspace to collapse it, round the multiplied
height so that we don't change other workspace sizes via rounding
differences.
- Use separate horizontal and vertical scales, so that every thumbnail
has the same horizontal scale.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
Allow defining a "porthole" that is the visible area of a workspace
thumbnail, and use this to clip the portion under the panel off the
workspace thumbnails. (This is wrong for fullscreen windows, but not
very wrong, and hopefullly the few missing pixels will be
unnoticeable.)
https://bugzilla.gnome.org/show_bug.cgi?id=641880
Because the overall parent allocation width immediately when the workspace
count changes, we were sometimes drawing the indicator in the wrong place
in the indicator animation that proceeded the remove-workspace animation.
Fix this by tweening only the Y position of the indicator and computing
the X position and size in our allocate() method. This also is considerably
simpler than switching the indicator between fixed position and geometry
managed.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
Rather than killing the workspace indicator indicator when we remove
workspaces because the source and target locations might have changed,
do it as a separate first step. This provides a better explanation
than doing it simultaneously with the addition/removal or not at all
and also keeps our computations simple.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
When we animating the scale for the thumbnails, the border and
background should wrap around the current size of the thumbails.
The technique that we are using to animate the scale breaks that
since we don't animate the overall size of the thumbnails box -
we just animate our child actors within the allocation.
To fix this, switch from drawing the background by packing in another
container to drawing the background with a separate actor that
is under the other actors and allocated by our custom logic.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
To explain to the user what is happening, instead of abruptly changing
updating the workspace thumbnail list, slide thubmnails in and out
as they are added and removed.
To implement this, we track a state for each thumbnail and when things
change go through a process of first sliding removed thumbnails out,
then ollapsing the left-over spaces and rescaling the thumbnails, then
finally sliding newly added thumbnails in.
https://bugzilla.gnome.org/show_bug.cgi?id=641881
For historical reasons, StEntry always did hover tracking when you had
visible hint_text, even if track_hover was FALSE. Remove that special
case, and make entries track hover just like all other widgets do.
If we actually needed to distinguish hovered-with-hint-text from
hovered-without-hint-text (which, at the moment, we don't), we could
do that by setting separate CSS for :hover and :hover:indeterminate.
https://bugzilla.gnome.org/show_bug.cgi?id=642483
The setting in org.gnome.desktop.default-applications.at
has been removed, use the corresponding setting in
org.gnome.desktop.a11y.applications instead.
The setting in org.gnome.desktop.default-applications.at
has been removed, use the corresponding setting in
org.gnome.desktop.a11y.applications instead.
If you left the overview immediately after entering it (either
intentionally or due to a bug), the app menu would mistakenly end up
hidden due to flaky interaction between its show() and hide() methods.
Based on a patch by Dan Winship <danw@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=641117
When we have more thumbnails than can fit in the vertical space, scale
them down. This is implemented by using a generic container so we can
compute positions and sizes on the fly and do the appropriate
width-for-height behavior.
The usage of clutter constraints to position the indicator is droppped
since it less complicated to just position the indicator in the right
place ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
The scale we zoom to in the "zoomed out" mode depends on the width of the
controls area. Once we rescale the workspaces dynamically, we'll need to
update the zoom scale as we add and remove workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
We will change the workspace thumbnail size as we get more thumbnails; it doesn't
really make sense to always show 1/5 of the thumbnails how big or small they are,
so instead show a CSS-configurable length.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Fix a bug in the computation of the zoomed-out scale and use a StBin
instead of an unnecessary StBoxLayout. Using the StBin will allow
correct width-for-height behavior for the controls.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
Add WorkspaceThumbnail.ThumbnailsBox to handle managing the array
of workspace thumbnails; the logic will get more complex as we add
scaling and animation.
https://bugzilla.gnome.org/show_bug.cgi?id=641879
The settings in org.gnome.desktop.default-applications.at
have been removed, use the corresponding settings in
org.gnome.desktop.a11y.applications instead.
gsettings-desktop-schemas had two conflicting settings for showing
the magnifier: 'show-magnifier' in org.gnome.desktop.a11y.magnifier
and 'screen-magnifier-enabled' in org.gnome.desktop.a11y.applications.
The former has been removed in favor of the latter, so adjust to this
change.
Add the machinery to cancel the notification when a new playing a
new one (wrapping ca_context_cancel), then use it when scrolling
the status icon.
Not doing it for the slider because it causes noise, either with the
keyboard, with mouse drag or with mouse wheel.
https://bugzilla.gnome.org/show_bug.cgi?id=633667
The original icon doesn't exist, which results in empathy summary
items in the tray showing no icons (invisible) at all. With this fix
users can now at least see where the icons are (they are no longer
invisible).
https://bugzilla.gnome.org/show_bug.cgi?id=639468
As Main.overview is now usable from the view selector's constructor,
move the setup of signal connections there and remove the show/hide
methods which were used as workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
To enable find-as-you-type when entering the overview and disabling
it when leaving, we used a chain of functions calls from ViewSelector
over SearchTab to SearchEntry. As find-as-you-type should be enabled
while the overview is shown, the activation/deactivation can be
handled entirely by the SearchEntry itself by tying it to the entry's
visibility.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
As Main.overview is now usable from the dash's constructor, move
the setup of signal connections there and remove the show/hide
methods which were used as workaround.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
The Overview does not only hold the different elements visible in
the overview, but is also a central point to manage drag signals.
As objects which are constructed in the overview constructor cannot
access Main.overview (as its constructor has not finished yet), we
use misnamed show/hide methods to work around this limitation, which
are called when entering/leaving the overview.
A better way to handle this problem is to remove the limitation
altogether by splitting the overview constructor between internals,
which remain in the constructor, and more complex objects which
need to access Main.overview, and whose initialization is moved
to a public init() function which is called by main.js after the
overview has been constructed.
https://bugzilla.gnome.org/show_bug.cgi?id=642196
This patch fixes the summary notification reappearing if you click on the
summary item to hide it and hover away. It also ensures that when you click
on any summary item which doesn't correspond to the summary notification
being shown, a new summary notification will replace it right away.
What used to happen is that we'd unset the clicked item in _unlock() that
was called when the focus was ungrabbed because the user clicked outside
of the summary notification, but then would have this._clickedSummaryItem
be null in _onSummaryItemClicked() , and set it to the clicked item all
over again. This patch ensures that we unset the clicked item only when
it is necessary.
We also needed to add the code to call _updateState() again to show a new
summary notification when a previous one was hidden, but
this._clickedSummaryItem was set.
https://bugzilla.gnome.org/show_bug.cgi?id=642005
Follow-up to commit 09717aae58 so
title changes also support markup instead of the ugly "<i></i>"
status.
Additionally, make sure to escape the contact's title as that
may accidentally contain unsafe markup or characters.
https://bugzilla.gnome.org/show_bug.cgi?id=642209
We were adding pango markup to the message in ContactManager.setPresence,
but weren't correctly marking the message as containing pango markup,
allowing for uglyness such as "User is <i>away</i>." being shown to the
user.
https://bugzilla.gnome.org/show_bug.cgi?id=642209
As the dash is one of the primary drop targets for dragging application
launchers, it's reasonable to use the dash icon size for app icons'
drag actors, especially with the larger size now used in the application
view.
https://bugzilla.gnome.org/show_bug.cgi?id=639428
As elements in the dash are scaled to accommodate a growing number
of items, the icon size used may end up rather small. In that case,
dragging items to the dash which are significantly larger than items
in the dash is getting clumsy, so it makes sense for some components
to synchronize the size of drag actors with the currently used icon
size in the dash. To enable other components to do this, make the icon
size a public property.
https://bugzilla.gnome.org/show_bug.cgi?id=639428
- Center the icon texture in the area allocated for it, and always give
the nominal size - avoid off-by-one scaling if the parent allocated
a little less or more size than we wanted.
- Use Math.floor() when centering horizontally to avoid allocation
at a half pixel.
https://bugzilla.gnome.org/show_bug.cgi?id=642124
Make calling workspace.setReservedSlot(null) do nothing if the slot was
already null; this improves efficiency and more importantly chills out some
weird reentrancy at the end of drag and drop that removes a window from
a workspace.
We were properly accounting for the fact that an ancestor of the
parent could be scaled rather than the parent itself when computing
the snap-back scale, but directly using parent.scale_x for the
snap-back location.
https://bugzilla.gnome.org/show_bug.cgi?id=642117
A right click was propagating through to the parent actor meaning
that a right click would activate the workspace twice and leave the
overview instead of just switching to it.
https://bugzilla.gnome.org/show_bug.cgi?id=641973
If you want to select a workspace and go there, having to go back to
the main part of the window selector and click on a window is annoying,
so make a second click on the active workspace go to the main view.
https://bugzilla.gnome.org/show_bug.cgi?id=641973
Some recent painting-efficiency fix broke the inspector, which
accidentally depended on things getting repainted too often, and so
was failing to highlight things properly now. A simple queue_redraw()
fixes this, but while I was there, I decided to port the drawing hook
to JS as well, since all the necessary parts of cogl work fine from
JS.
https://bugzilla.gnome.org/show_bug.cgi?id=642058
That way it can be used when other components of the message tray need to
grab focus, such as the summary bubble with multiple notifications or the
summary item's right click menu.
https://bugzilla.gnome.org/show_bug.cgi?id=641810
The view might get mapped before the filters have been added, so
trying to reset to the "All" filter will throw an exception. Fix
by only do the reset if the filters have been initialized.
When switching to the app view, it is unlikely that a user is
going to select an application from the same filter list as the
last time the view was used, so reset the view to the "All" filter
on switch.
https://bugzilla.gnome.org/show_bug.cgi?id=641987
When switching to the application view, the view is still scrolled
to the position it had when left previously. Given that it is rather
unlikely that the application the user wants to select is located close
to that position, it appears beneficial to start at a predictable
position, so make sure that the scroll position is always reset to
the top.
https://bugzilla.gnome.org/show_bug.cgi?id=641987
The default state of the switcher is constructed but not visible,
so create it that way.
This fixes a bug where if we created the switcher but didn't show it
or use it we'd end up with an empty, odd looking switcher.
We already skip animations for item additions/removals while the
overview is hidden or when initially filling the dash (to avoid
an odd zoom effect when showing), apply the same logic to animations
of icon size changes.
If a window is closed, the list of running applications may change
while the overview is hidden. Animating dash changes is pointless
in this case, so update the dash without animations in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
The dash is created empty and the initial set of items is added
before it's shown for the first time. As the additions of items
is now animated, this results in a slightly odd effect when all
items zoom in at once. So special-case the first time _redisplay()
is called and skip animations in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
In general, all changes in the shell interface should be backed
by animations to give the interface a more natural feel and provide
feedback of what's happening. Currently the dash violates that
principle, as items simply appear/disappear or change size abruptly,
so add animations for application list and icon size changes.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
Clutter containers only take their children's size into account, but
not their scale. As we want the dash to change its size smoothly
when zooming items in/out, we wrap each item in a custom container
which does consider the child's scale.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
When the list of applications in the dash changes, all items are
removed and new ones added. While this approach is nice and simple,
it does not work if we want to animate changes. So rather than
replacing the old list of applications with the new one, figure
out the changes and only apply those.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
Previously the icon size was only adjusted due to changes in the list
of application icons displayed, not when showing or hiding the remove
target. As a result, the remove target could end up cut off, so take
this case into account and adjust the icon size when showing or hiding
the remove target.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
The current approach to adjust the icon size of dash items is rather
expensive: the size of each item is changed from largest to smallest,
until the height of the dash fits the maximum available height, so
quite some ClutterTextures are created and disposed.
A better approach is to calculate the required size beforehand and
only change the icon size when necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
With the current dash layout of a single column, nearly every icon
label ends up ellipsized, even at the largest allowed icon size.
Not showing any labels appears to be the cleanest approach in this
case, so disable them in the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
Currently there is a serious problem with ellipsization in various
parts of the overview. While wrapping the label or giving it more
space may be appropriate approaches for the application view, neither
works very well for the dash - possibly the best option there is to
not show the label at all.
So add a constructor parameter to BaseIcon to allow hiding the
label.
https://bugzilla.gnome.org/show_bug.cgi?id=636156
With workspaces now being stacked vertically, the horizontal
indicators in the workspace switcher are rather odd. There are
some designs for an improved workspace switch animation, but
it may take a while to implement them, so for now just change
the orientation of the existing switcher.
https://bugzilla.gnome.org/show_bug.cgi?id=641931
Point the arrow to the center of the sourceActor's content box, rather
than its allocation, in case it has asymmetric padding (as the
rightmost message tray summary item does).
https://bugzilla.gnome.org/show_bug.cgi?id=641728
Commit c86a977564 removed :pressed from the list of styles which
highlight panel buttons, so the button highlight is now lost when
mousing over menu items. This is not the behavior we want, the
buttons should keep their highlight while being "active". Rather
than adding back the pseudo class to the CSS, let buttons use the
:active pseudo class when the menu is open, which makes more sense
than :pressed anyway.
The status icon should always be visible if more than two layouts
are configured. The settings key which was used to enforce hiding
the icon in this case as well has already been removed from the
g-s-d schema, causing an error on startup.
Intead of using a St.Group and tweening the position of the controls
actor, use a St.GenericLayout and tween a Javascript property. This
allows us to more reliably track the height of the overall workspace
display and propagate it to the controls actor.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With workspace thumbnails, we don't switch workspaces when dragging windows
between workspaces or adding new workspaces, so we also shouldn't switch
on launch.
* Add workspace parameters to shell_doc_system_open(),
shell_app_activate, shell_app_open_new_window()
* Pass a 'params' object when activating items in the overview with
two currently defined parameters: workspace and timestamp. (timestamp
is only implemented where it is easy and doesn't require interface
changes - using the global current timestamp for the shell is almost
always right or at least good enough.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
At the end of a drag operation, we would invoke the code to slide the
controls in (because we were no longer DND'ing and not hovering) and
then immediately afterwards invoke the code to slide it back out when
we got the ENTER event from the end of DND. While the immediately
overridden tween probably won't have any visible effect it's better
to avoid this, so wait to update the zoom state until BEFORE_REDRAW.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With automatic workspace management, explicit controls to add and
remove workspaces are no longer necessary. We also can remove the
use of addWorkspace for middle-button-click on a launcher since
launching on the last empty workspace will do the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
With workspace thumbnails, we want to make workspace switching
something that happens largely under the users control, so don't
switch to newly added workspaces in the overview.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Add workspace thumbnails to the workspace controls area. The user can
click on the thumbnail to switch workspaces and can also drag windows
out of the thumbnail to other workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Moving the base tracking of restacking to WorkspacesDisplay will allow
us to use it to update stacking in the workspace thumbnails as well as
in the main workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
Instead of having a separation between popping the controls out on hover
and zooming out for DND, always do both at once. This is necessary because
when we added workspace thumbnails the controls will get bigger, so we need
to make sure we zoom out far enough so that the windows don't overlap the
controls.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
When checking the type of a DND source, instead of checking
'instanceof Workspaces.WindowClone' accept any actor with realWindow
and metaWindow properties. This will be useful to support a separate
type of actor dragged from workspace thumbnails.
https://bugzilla.gnome.org/show_bug.cgi?id=640996
The new plans for a row of workspace thumbnails on the right side of the
overview means that the mental model we present to the user will be
vertical, so switch the Metacity workspace layout to be vertical and
adjust the keybinding handling, animations, and workspace layout in
the overview to match.
(This commit does not change the workspace switching indicator pending
finalization of what we want to do with that - it still shows workspaces
arranged vertically.)
https://bugzilla.gnome.org/show_bug.cgi?id=640996
St.Button 'clicked' signal now has two arguments, and because we are also
passing an action id as an argument to the _onActionInvoked() callback,
we need to have the number of the signal arguments reflected accurately in
the function arguments.
https://bugzilla.gnome.org/show_bug.cgi?id=641809
This makes the animation feel more stable and keeps the left-most item expanded
when you move the mouse to the left in the tray.
The following behavior details are implemented by this patch:
- we wait to collapse an expanded item till after the tray is hidden if
we are hiding the tray
- we don't collapse an expanded item if the summary notification associated
with it is being shown, unless a different summary item is hovered over
- we don't consider the mouse hovering over a summary notification as
hovering over the tray, which allows us to collapse an expanded summary
item if it is not associated with the summary notification being shown
https://bugzilla.gnome.org/show_bug.cgi?id=636930
For historical reasons, we had both StClickable and StButton, which
were nearly identical. StButton was more widely-used, so keep that and
port all StClickable users to that.
https://bugzilla.gnome.org/show_bug.cgi?id=640583
It doesn't currently work, so hide it for now.
It's not clear it's going to stay around long term,
anyway. If it doesn't we can delete the code, then.
Otherwise, we can add the code back when we have
something that works.
https://bugzilla.gnome.org/show_bug.cgi?id=636680
Commit 91d8a32f25 let WindowClone forward the size-changed signal
of the "real" window, disconnecting the signal handler when the
clone is destroyed. In case the clone was destroyed due to the
MetaWindowActor being closed, this results in a warning
(gsignal.c:2392: instance `0x2a3fac0' has no handler with id `2955').
Handle the case where the original window is destroyed before its
clone.
1. Both functions leaked the nodes in priv->children
2. st_container_remove_all wasn't properly updating first_child and last_child
3. remove_all() is almost never right since it won't cause signal handlers
on the children to be removed. In the rare cases where it might be needed
the caller can simply use clutter_container_remove().
https://bugzilla.gnome.org/show_bug.cgi?id=640781
In non-US locales, Monday is generally considered the first day
of the week. Take this into account when building the event
lists displayed under "This week"/"Next week".
https://bugzilla.gnome.org/show_bug.cgi?id=641049
Signed-off-by: David Zeuthen <davidz@redhat.com>
When the current day does not exist in the next/prev month (like 31 Feb),
the next/prev buttons end up skipping the month.
Fix that by going to the last day of the month instead.
https://bugzilla.gnome.org/show_bug.cgi?id=641067
There are multiple code passes that can result in Notification::destroy()
being called, such as a notification being closed by the application
when it exits and the associated source being removed at the same time.
However, we should only emit 'destroy' for the notification and
do the associated work once.
Notification::destroy() now takes 'reason' as an optional argument.
Calling Notification::destroy() directly when connecting to 'destroy'
on Source, as we did before, was inadvertently passing 'source' as an
argument to the function.
https://bugzilla.gnome.org/show_bug.cgi?id=640976
This fixes emitting NotificationClosed for resident notifications
that are clicked, but are not actually destroyed.
This also ensures that we emit NotificationClosed in all cases when
a notification is destroyed, which can happen when:
- a non-resident notification is clicked
- an action is invoked on a non-resident notification
- an application the notification was associated with is focused
- a transient notification is done showing
- a notification was requested to be closed by the application
- a tray icon the notification was associated with is removed
https://bugzilla.gnome.org/show_bug.cgi?id=638071
Windows may change their size while the overview is open, e.g. when
switching panels in the control center. Make sure that the preview's
position and overlay are updated in that case.
https://bugzilla.gnome.org/show_bug.cgi?id=640560
On button-release, a threshold is used to determine if the gesture
should be considered a click and thus ignored. While the drag is
active though, the controlled actor is dragged immediately. As a
result, dragging by a tiny amount does not trigger a snap back when
the action is interpreted as a click. As a fix, do not update the
dragged actor's position until the same threshold is passed.
https://bugzilla.gnome.org/show_bug.cgi?id=640494
The main overview group starts capturing events on button-press
events to implement swipe-scrolling. While reactive children of
the group which handle both button-press and button-release events
don't trigger swipe-scrolling, children that only rely on
button-release have stopped working - at least the primary/secondary
icons of the search entry are affected. While the capture handler
already checks the pointer movement between press and release to
determine whether the action should be considered a click rather
than a drag, it still blocks the release event from propagating.
Instead, only block release events for drag actions, but not for
clicks.
https://bugzilla.gnome.org/show_bug.cgi?id=640493
When aiming for the thumbnails with the mouse one might cross an
icon by accident which causes the thumbnail list to be closed, which is
frustrating.
Fix this by delaying the icon activation when the thumbnail list is
open.
https://bugzilla.gnome.org/show_bug.cgi?id=636650
With general support for swipe-scrolling in the overview, there is
no reason to limit the behavior to workspaces. It is equally useful
for scrolling through the grid of available applications, so enable
swipe-scrolling for the app view.
https://bugzilla.gnome.org/show_bug.cgi?id=635034
The workspaces view allows to drag the active workspace to swipe-scroll
to the next or previous workspace. While this behavior can come in handy
in general, there are good reasons to move the functionality to the
overview:
- Finding a spot on a workspace to start a drag can be hard,
especially when the workspace contains a single window
- With the new layout, workspaces have no visible border, making
it hard to predict where a drag can be initiated
- The same behavior is equally useful for other elements
So add setScrollAdjustment() to the overview, which allows setting
an adjustment controlled with swipe-scrolling (either horizontally
or vertically); only a single adjustment can be controlled at a
time. A swipe-scroll can be initiated on any part of the background that
is not occupied by a reactive actor. For cases where further control
is needed, 'swipe-scroll-start' and 'swipe-scroll-end' signals are
emitted.
https://bugzilla.gnome.org/show_bug.cgi?id=635034
Introduce a generic framework for on/off indicators that are shown
in the panel, next to the system status area, and use it for
showing the status of modifier keys.
https://bugzilla.gnome.org/show_bug.cgi?id=600771
Drag monitor functions are supposed to return a value, but
_onDragMotion() does not always do so. Add the missing return
value and remove unnecessary else.
As Gdk.Device.get_state() does not work properly from Javascript,
we used to block it in the environment. The method now has been
annotated with (skip), causing shell to crash on startup as only
existing methods may be blocked.
Just remove the block in question, as the annotation prevents the
use of that method anyway.
Currently we reset the timeout on every mouse movement which means
the user has to keep the mouse at the exact same position for 1.25
seconds.
Be more tolerant and allow the user to move the mouse over the
window without reseting the timeout, which should make activating
windows easier.
https://bugzilla.gnome.org/show_bug.cgi?id=638896
This fixes the problem of chat notifications collapsing and then expanding
again when receiving multiple messages in the expanded new notification.
https://bugzilla.gnome.org/show_bug.cgi?id=629557
g_settings_schema_new() aborts if the requested schema is not found,
so the previous approach of handling the case of unstable nautilus
not being installed did not work.
Instead, remove the use of the setting altogether - the original intent
was to not have separate items for Desktop and Home in the places
section if the nautilus key was set. As the section has been removed
anyway, the impact of always adding the desktop folder is minimal
(e.g. searching for "desktop" will match the desktop folder even
if it's set to the home folder).
The latest development version of nautilus has been ported to
GSettings, which we now use as well for the desktop-is-home-dir
preference. Obviously, the required schema is only available if
a recent enough nautilus version is installed. Instead of adding
yet another module to the moduleset, catch the exception and
ignore the preference in case the schema is not available.
https://bugzilla.gnome.org/show_bug.cgi?id=639689
'Places' follows the nautilus preference of whether the Desktop
should be a separate directory or the home folder should be used.
Nautilus has been ported to GSettings a while ago, so follow suit.
https://bugzilla.gnome.org/show_bug.cgi?id=639689
GenericDisplay used to provide a common base class for places and
recent items, none of which exists anymore. As of current mockups,
display items in "Finding and Reminding" should be based on
BaseIcon / IconGrid instead.
Currently recent items only show up in search results. It is planned
to bring them back in the context of "Finding and Reminding", but
the UI in the corresponding mockups differs significantly from the
removed UI, so that it doesn't seem useful to keep it around.
Layout items in the menu overwrite PopupBaseMenuItem.activate(),
so the menu stays open when selecting a layout from the menu.
Chain up to the parent class' method to make the items behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=639474
When an error message is displayed the run dialog
pops to the new height instantly. It needs a
a transition.
This commit makes the dialog quickly grow to its
ultimate height, making room for the error message,
before showing it.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
Now that we have a modalDialog base class in gnome-shell,
it makes sense to use it for the run dialog.
Note, the run dialog doesn't currently have buttons, so
it isn't exercising all the API of the base class.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
This is a base class to make it easier to
gain a consistent look for system modal dialogs.
It handles creating a darkened backdrop behind the dialog, setting
up buttons in the dialog, keynav, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
Right now popModal() passes global.get_current_time() for
its begin_modal() call. global.get_current_time() is the
timestamp of the last gdk or clutter event processed by the
shell's mutter process. These values could potentially be
be too stale to use if pushModal() were to get called in
response to an event by another process.
This commit changes pushModal() to have an optional timestamp
argument, which can be used to associate the call with the
event that initiated it.
https://bugzilla.gnome.org/show_bug.cgi?id=637187
Layout items in the menu overwrite PopupBaseMenuItem.activate(),
so the menu stays open when selecting a layout from the menu.
Chain up to the parent class' method to make the items behave properly.
https://bugzilla.gnome.org/show_bug.cgi?id=639474
AppWellIcon is used both in the dash and view selector. As the dash
requires manual sizing, it is not possible to set the icon size used
in the view selector in the CSS, but icons will use the default size
(unless set manually as in the dash).
Expose the params parameter of BaseIcon and enable manual resizing
only for AppWellIcons in the dash.
https://bugzilla.gnome.org/show_bug.cgi?id=639428
Since we have to use pkill, kludgily, for the right combination of
portability and featurefulness, put the code in one place rather than
duplicating it everywhere.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Add Util.spawn, Util.spawnCommandLine, and Util.spawnDesktop for
spawning a command/argv/.desktop file in the background, automatically
handling errors via MessageTray.SystemNotificationSource(), and
Util.trySpawn, Util.trySpawnCommandLine, and Utils.trySpawnDesktop
that don't do automatic error handling (but do at least clean up the
error message in the exception a bit).
Update various other bits of code around the shell to use the new
methods.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Rename imports.misc.utils to imports.misc.util for more consistency
(eg, with shell-util).
Also, use the string-based RegExp() constructor rather than a RegExp
literal, since the literal is extremely difficult to parse correctly,
and confuses emacs and probably other editors and thus messes up
autoindentation, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=635089
Require that all extensions have a "shell-version" property in their
metadata, which is an array of supported Shell versions.
Extensions can target a specific version triple or an entire stable
version.
Optionally, they can also require a specific GJS version, to ensure
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Add an entry in config.js.in for PACKAGE_VERSION and GJS_VERSION,
to be used by the notification daemon and in the future by the
extension system.
https://bugzilla.gnome.org/show_bug.cgi?id=639255
Add an indicator for the current keyboard layout, based on
libgnomekbd. The indicator is shown when more than one group
is loaded in X and it is not disabled in GSettings.
https://bugzilla.gnome.org/show_bug.cgi?id=600771
Although certain keys (like Ctrl-Alt-Tab and Alt-F2) should work in
the overview, we generally don't want them to work from inside each
others grabs. In particular, typing Left or Right from inside
Ctrl-Alt-Tab should navigate among focus groups, not switch
workspaces.
https://bugzilla.gnome.org/show_bug.cgi?id=636971
Also, change _globalKeyPressHandler to handle KEY_PRESS, not
KEY_RELEASE, for consistency with other code (and so that the
combination of an Alt-F1 press and release doesn't first enter the
overview and then immediately exit it).
https://bugzilla.gnome.org/show_bug.cgi?id=636371
Actors in clutter are supposed to be re-allocated with
Clutter.AllocationFlags.ABSOLUTE_ORIGIN_CHANGED if they move relative
to the screen, even if they don't move relative to their parent.
Currently this does not work correctly for actors inside containers
with non-northwest gravity. This is probably a fixable bug, but
gravity has messed up other things in the past too, so let's just not
use it.
This change ensures that summary trayicons are re-allocated when the
summary animates, and is part of the fix for
https://bugzilla.gnome.org/show_bug.cgi?id=635695
This should be useful for theme authors who want to quickly reload
the theme without restarting the whole shell.
Signed-off-by: Federico Mena Quintero <federico@gnome.org>
https://bugzilla.gnome.org/show_bug.cgi?id=630428
When doing keyboard navigation, ignore menus whose sourceActor is
hidden.
This is needed to hide status icons, as otherwise the menu would
appear despite having no icon.
https://bugzilla.gnome.org/show_bug.cgi?id=638306
When BluetoothApplet::show-full-menu property is notified (when you
switch from a disabled adapter / no adapter to an active one), we
would show all the menu, including the device separator, without
checking if any devices actually existed.
https://bugzilla.gnome.org/show_bug.cgi?id=637690
If the switcher is destroyed without ever being fully shown (either
because it couldn't get a keyboard grab, or just because there are no
apps to display), destroy it immediately rather than tweening it
towards destruction, since its contents haven't been built yet and
_allocate() will throw errors if it runs.
The gnome-panel allows the user to hover over a tasklist entry
while draging to activate a minimized or obscured window and drop onto it.
Implement a similar behaviour by allowing draging to the activities button or
the hotcorner (and thus opening the overview), which allows the user to
activate any window (even on different workspaces) as a drop target.
https://bugzilla.gnome.org/show_bug.cgi?id=601731
